Disclaimer: "The text of the agreement is made public here exclusively for information purposes. The text presented in this document is the text at the end of the negotiations conducted by the European Commission. It will be subject to legal revision in order to verify the internal consistency and to ensure that the formulations of the negotiating results are legally sound. It will thereafter be transmitted to the Council of the European Union and to the European Parliament for ratification. The text presented in this document is not binding under international law and will only become so after the completion of the ratification process." Annex concerning the definition of the concept of "originating products" and methods of administrative cooperation (in grey draft Annotations) LIST OF APPENDIXES Appendix 1: Introductory Notes to the List in Appendix 2 Appendix 2: List of working or processing required to be carried out on non-originating materials in order for a manufacture product to obtain originating status Appendix 2A: Addendum to the list of working or processing required to be carried out on non-originating materials in order for a manufactured product to obtain originating status Appendix 3: Specimens of movement certificate EUR.1 and application for a movement certificate EUR.1 Appendix 4: Text of the invoice declaration Appendix 5: Products to which subparagraph (b) of the Declaration of the European Union concerning Article 5 in relation to originating products from Peru, Ecuador and Colombia applies DECLARATIONS REGARDING ANNEX II CONCERNING THE DEFINITION OF THE CONCEPT OF "ORIGINATING PRODUCTS" AND METHODS OF ADMINISTRATIVE COOPERATION Declaration of the European Union concerning Article 5 of Annex II in relation to originating products from Peru, Ecuador and Colombia Joint declaration of Peru, Ecuador and Colombia concerning Article 5 of Annex II in relation to originating products from the European Union Joint declaration concerning the Principality of Andorra Joint declaration concerning the Republic of San Marino Joint declaration on the revision of the rules of origin contained in Annex II concerning the Definition of "Originating Products" and Methods of Administrative Cooperation 1 ARTICLE 1 Definitions − "competent authorities or customs authorities" refers to the following governmental bodies: (a) with respect to Colombia, the Ministerio de Comercio, Industria y Turismo or the Dirección de Impuestos de Aduanas Nacionales, or their successors; (b) with respect to Ecuador, the Ministerio de Comercio Exterior o del Servicio Nacional de Aduana del Ecuador (SENAE), or its successors; (c) with respect to Peru, the Ministerio de Comercio Exterior y Turismo, or its successors; and (d) with respect to the European Union, the customs authorities of the European Union Member States. ARTICLE 36 Special conditions 3. The exporter or his/her authorised representative shall enter "Colombia", “Ecuador” or "Peru" and "Ceuta and Melilla" in Box 2 of movement certificate EUR.1 or on invoice declarations. In addition, in the case of products originating in Ceuta and Melilla, this shall be indicated in Box 4 of movement certificate EUR.1 or on invoice declarations. APPENDIX 5 PRODUCTS TO WHICH SUBPARAGRAPH (b) OF THE DECLARATION OF THE EUROPEAN UNION CONCERNING ARTICLE 5 IN RELATION TO ORIGINATING PRODUCTS FROM PERU, ECUADOR AND COLOMBIA APPLIES 1. The conditions established in subparagraph (b) of the Declaration of the European Union concerning Article 5 in relation to originating products from Peru, Ecuador and Colombia apply for determining the origin of the following products exported from Peru to the European Union subject to the annual quotas established below: DECLARATION OF THE EUROPEAN UNION CONCERNING ARTICLE 5 IN RELATION TO ORIGINATING PRODUCTS FROM PERU, ECUADOR AND COLOMBIA 2 JOINT DECLARATION OF PERU, ECUADOR AND COLOMBIA CONCERNING ARTICLE 5 IN RELATION TO ORIGINATING PRODUCTS FROM THE EUROPEAN UNION The Republic of Peru, the Republic of Ecuador and the Republic of Colombia declare that, for the purposes of subparagraphs 1(f) and 1(g) of Article 5 of Annex II Concerning the Definition of The Concept of "Originating Products" and Methods of Administrative Cooperation (hereinafter referred to as "the Annex"): Appendix 2A ADDENDUM TO THE LIST OF WORKING OR PROCESSING REQUIRED TO BE CARRIED OUT ON NONORIGINATING MATERIALS IN ORDER THAT THE PRODUCT MANUFACTURED CAN OBTAIN ORIGINATING STATUS Note 1 The following rule shall confer origin for products exported from the European Union to Colombia, Ecuador or Peru within the annual quotas per country indicated below: HS heading Description of product Working or processing carried out on nonoriginating materials that confers originating status (1) (2) (3) or (4) ex 0901 Roasted coffee of the variety Arabica Manufacture from materials of any heading Colombia Peru Ecuador 120 tons 30 tons 110 tons 3 Note 3 The following rule shall confer origin for products exported from the European Union to Colombia, Ecuador or Peru within the annual quotas per country indicated below: HS heading Description of product Working or processing carried out on nonoriginating materials that confers originating status (1) (2) (3) or (4) 1805 Cocoa powder, not containing added sugar or other sweetening matter Manufacture from materials of any heading, except that of the product Colombia Peru Ecuador 100 tons 450 tons 120 tons Nota 5 La siguiente regla conferirá origen a los productos exportados de Colombia, Ecuador o Perú a la UE dentro de los contingentes anuales establecidos por país como se indica a continuación: Colombia Ecuador Perú 15,000 toneladas 15,000 toneladas 15,000 toneladas En caso de que la tasa de utilización de los contingentes anteriormente establecidos exceda el 75 por ciento en un año determinado, estas cantidades serán revisadas, con miras a llegar a un acuerdo sobre su incremento, en el Subcomité. 4 Nota 7 La siguiente regla conferirá origen a los productos exportados de Colombia, Ecuador o Perú a la UE dentro de los contingentes anuales establecidos por país como se indica a continuación: Partida SA Colombia Ecuador Perú 6108.22 200 toneladas 200 toneladas 200 toneladas 6112.31 25 toneladas 25 toneladas 25 toneladas 6112.41 100 toneladas 100 toneladas 100 toneladas 6115.10 25 toneladas 25 toneladas 25 toneladas 6115.21 40 toneladas 40 toneladas 40 toneladas 6115.22 15 toneladas 15 toneladas 15 toneladas 6115.30 25 toneladas 25 toneladas 25 toneladas 6115.96 175 toneladas 175 toneladas 175 toneladas Nota 8 Las reglas de origen establecidas en el Apéndice 2 para los productos listados a continuación aplicarán siempre y cuando la UE mantenga un arancel consolidado de 0 por ciento en la OMC para dichos productos. Si la UE incrementa el arancel consolidado OMC aplicable a estos productos, la siguiente regla conferirá origen a los productos exportados de Colombia, Ecuador o Perú a la UE dentro de los contingentes anuales establecidos por país como se indica a continuación: Partida SA 7209 Descripción Productos laminados planos de hierro o acero sin alear, de anchura superior o igual a 600 mm, laminados en frío, sin chapar ni revestir 5 Colombia (toneladas) Ecuador (toneladas) Perú (toneladas) 100.000 100.000 100.000 7210 Productos laminados planos de hierro o acero sin alear, de anchura superior o igual a 600 mm, chapados o revestidos 7211 Productos laminados planos de hierro o acero sin alear, de anchura inferior a 600 mm, sin chapar ni revestir 7212 100.000 100.000 100.000 Productos laminados planos de hierro o acero sin alear, de anchura inferior a 600 mm, chapados o revestidos 100.000 100.000 100.000 7213 Alambrón de hierro o acero sin alear 100.000 100.000 100.000 7214 Barras de hierro o acero sin alear, simplemente forjadas, laminadas o extrudidas, en caliente, así como las sometidas a torsión después del laminado 100.000 100.000 100.000 7216 Perfiles de hierro o acero sin alear 100.000 100.000 100.000 7217 Alambre de hierro o acero sin alear 50.000 50.000 50.000 7304 Tubos y perfiles huecos, sin soldadura (sin costura), de hierro o acero 50.000 50.000 50.000 7305 Los demás tubos (por ejemplo: soldados o remachados) de sección circular con diámetro exterior superior a 406,4mm, de hierro o acero 50.000 50.000 50.000 7306 Los demás tubos y perfiles huecos (por ejemplo: soldados, remachados, grapados o con los bordes simplemente aproximados) de hierro o acero 100.000 100.000 100.000 7308 Construcciones y sus partes de hierro o acero; chapas, barras, perfiles, tubos y similares de hierro o acero, preparados para la construcción. 50.000 50.000 50.000 6 Note 9 The following rule shall confer origin for products exported from Colombia, Ecuador and Peru to the European Union within the annual quotas per country indicated below: HS heading Colombia Peru Ecuador 7321 20,000 units 20,000 units 20,000 units 7323 50,000 tons 50,000 tons 50,000 tons 7325 50,000 tons 50,000 tons 50,000 tons 7 APENDICE 2 LISTA DE LAS ELABORACIONES O TRANSFORMACIONES A APLICAR EN LOS MATERIALES NO ORIGINARIOS PARA QUE EL PRODUCTO TRANSFORMADO PUEDA OBTENER EL CARACTER DE ORIGINARIO No todos los productos mencionados en la lista están cubiertos por el Acuerdo, por lo que es necesario consultar las otras partes del Acuerdo. 1 ex Capítulo 65 Sombreros, demás tocados, y sus partes, con excepción de: ex 6504 Sombreros de paja toquilla 6505 Sombreros y demás tocados, de punto, de encaje, de fieltro o de otros productos textiles en pieza (pero no en tiras), incluso guarnecidos; redecillas para el cabello, de cualquier materia, incluso guarnecidas Fabricación en la cual todos los materiales utilizados se clasifican en una partida diferente a la del producto Fabricación en la cual la paja toquilla de la partida 1401 debe ser originaria Fabricación a partir de hilados o a partir de fibras textiles1 Véase la nota introductoria 6. 8