TABLE OF CONTENTS Information/Guide USA Test Sieving Specification................................... 3 Test Sieves-supplied with serial # and matching test sieve Certificate of Compliance. 8” Diameter........................................................................................... 4 12” Diameter......................................................................................... 5 3” Diameter........................................................................................... 6 Gold Series........................................................................................... 6 200mm Diameter.................................................................................. 7 6” Diameter........................................................................................... 8 10” Diameter......................................................................................... 8 18” Diameter......................................................................................... 9 Special Test Sieve Products (Wet Wash)............................................. 9 Test Sieve Cleaning Brushes............................................................... 9 Air Jet Test Sieves .............................................................................10 NEW! Alpine Smart Test Sieves .................................................................. 10 W.S. Tyler Sieving Software ........................................................................11 NEW! Alpine e200LS................................................................................................ 11 Laboratory Services...............................................................................12 & 13 RO-TAP® RX-29 & RO-TAP® RX-30 Test Sieve Shakers.......................... 14 RO-TAP® Conversion Kits............................................................................ 14 RO-TAP® Maintenance Kits......................................................................... 15 RO-TAP® RX-29-E & RO-TAP® RX-30-E Test Siever Shakers................... 15 RO-TAP® RX-94 Test Sieve Shaker............................................................. 16 NEW! RX-812 Coarse Sieve Shaker........................................................................ 16 Sound Enclosure Cabinets & Test Stand........................................................ 17 Rotary Sifter RX-20........................................................................................ 17 Sieving Accessories....................................................................................... 18 Sampling Devices........................................................................................... 19 Spinning Riffler............................................................................................... 19 RO-TAP® RX-29 & RX-30 Parts Diagram..................................................... 20 RO-TAP® RX-29 & RX-30 Parts List............................................................. 21 RO-TAP® RX-94 Parts Diagram................................................................... 22 RO-TAP® RX-94 Parts List............................................................................ 23 RX-812 Coarse Sieve Shaker Parts Diagram................................................ 24 RX-812 Coarse Sieve Shaker Parts List........................................................ 25 Computerized Particle Analysis Technology (CPA) ....................................... 26 Traceable Document of Certification (Sample)............................................ IBC CATALOG NOTES: 1. Prices shown are suggested list prices. 2. Prices are subject to change without prior notice. 3. Freight Terms: F.O.B. Mentor, Ohio. W.S. Tyler® and RO-TAP® are registered trademarks of Haver Tyler, Inc. © Copyright 2015, Haver Tyler, Inc. All rights Reserved 2 INFORMATION/GUIDE FOR TEST SIEVING For information regarding specific specifications, please refer to Standards ASTM E11-09 & ISO 565, 3310-1 Standard (1) 125 mm 106 mm 90 mm 75 mm 63 mm 53 mm 45 mm 37.5 mm 3 1.5 mm 26.5 mm 22.4 19.0 16.0 13.2 mm mm mm mm 11.2 9.5 8.0 6.7 mm mm mm mm 5.6 mm 4.75 mm 4.00 mm 3.35 mm 2.80 mm 2.36 mm 2.00 mm 1.7 mm 1.4 mm 1.18 mm 1.00 mm 710 µm 600 µm 500 µm 425 µm 355 µm 300 µm 250 µm 212 µm 180 µm 150 µm 125 µm 106 µm 90 µm 75 µm 63 µm 53 µm 45 µm 38 µm 32 µm Sieve Designation Alternative (2) 5 in. 4.24 in. 3-1/2 in. 3 in. 1-3/4 in. 1-1/2 in. 1-1/4 in. 1.06 in. 1.00 in. 7/8 in. 3/4 in. 5/8 in. 0.530 in. 1/2 in. 7/16 in. 3/8 in. 5/16 in. 0.265 in. 1/4 in. No. 3-1/2 (E) No. 4 No. 5 No. 6 No. 7 No. 8 No. 10 No. 12 No. 14 No. 16 No. 18 No. 20 No. 25 No. 30 No. 35 No. 40 No. 45 No. 50 No. 60 No. 70 No. 80 No. 100 No. 120 No. 140 No. 170 No. 200 No. 230 No. 270 No. 325 No. 400 No. 450 No. 500 No. 635 Nominal Sieve (3) 5 4.24 4 3.5 3 2.5 2.12 2 1.75 1.5 1.25 1.06 1 0.875 0.750 0.625 0.530 0.500 0.438 0.375 0.312 0.265 0.250 0.223 0.187 0.157 0.132 0.110 0.0937 0.0787 0.0661 0.0555 0.0469 0.0394 0.0331 0.0278 0.0234 0.0197 0.0165 0.0139 0.0117 0.0098 0.0083 0.0070 0.0059 0.0049 0.0041 0.0035 0.0029 0.0025 0.0021 0.0017 0.0015 0.0012 0.0010 0.0008 Permissible Variation in Openings (4) ±2.70 mm ± 2.20 mm ± 1.90 mm ± 1.60 mm ± 1.50 mm ± 1.40 mm ± 1.10 mm ± 1.00 mm ± .800 mm ± .800 mm ± .700 mm ± .600 mm ± .500 mm ± .410 mm ± .390 mm ± .350 mm ± .300 mm ± .250 mm ± .210 mm ± .200 mm ± .180 mm ± .150 mm ± .130 mm ± .110 mm ± .095 mm ± .080 mm ± .070 mm ± .060 mm ± .050 mm ± .045 mm ± .040 mm ± 35 µm ± 30 µm ± 25 µm ± 20 µm ± 19 µm ± 16 µm ± 14 µm ± 12 µm ± 10 µm ± 9 µm ± 8 µm ± 7 µm ± 6 µm ± 5 µm ± 5 µm ± 4 µm ± 4 µm ± 3 µm ± 3 µm ± 3 µm ± 3 µm ± 3 µm Opening Dimension not more than 5% of the Openings (5) 130.00 mm 110.2 mm 104.0 mm 93.6 mm 78. 1 mm 65.6 mm 55.2 mm 52.1 mm 46.9 mm 39.1 mm 32.9 mm 27.7 mm 26.1 mm 23.4 mm 19.9 mm 16.7 mm 13.83 mm 13.10 mm 11.75 mm 9.97 mm 8.41 mm 7.05 mm 6.64 mm 5.90 mm 5.02 mm 4.23 mm 3.55 mm 2.975 mm 2.515 mm 2.135 mm 1.820 mm 1.505 mm 1.270 mm 1.080 mm 925 µm 775 µm 660 µm 550 µm 471 µm 396 µm 337 µm 283 µm 242 µm 207 µm 174 µm 147 µm 126 µm 108 µm 91 µm 77 µm 66 µm 57 µm 48 µm 42 µm 34 µm 29 µm Maximum Individual Opening (6) 130.9 mm 111.1 mm 104.8 mm 94.4 mm 78.7 mm 66.2 mm 55.7 mm 52.6 mm 47.4 mm 39.5 mm 33.2 mm 28.0 mm 26.4 mm 23.7 mm 20.1 mm 17.0 mm 14.05 mm 13.31 mm 11.94 mm 10.16 mm 8.58 mm 7 .20 mm 6.78 mm 6.04 mm 5.14 mm 4.35 mm 3.66 mm 3.070 mm 2.600 mm 2.215 mm 1.890 mm 1.565 mm 1.330 mm 1.135 mm 970 µm 815 µm 695 µm 585 µm 502 µm 426 µm 363 µm 306 µm 263 µm 227 µm 192 µm 163 µm 141 µm 122 µm 103 µm 89 µm 76 µm 66 µm 57 µm 50 µm 41 µm 35 µm Nominal Wire Diameter, mm (7) 8.00 6.30 6.30 6.30 6.30 5.60 5.00 5.00 4.50 4.50 4.00 3.55 3.55 3.55 3.15 3.15 2.80 2.50 2.50 2.24 2.00 1.80 1.80 1.60 1.60 1.40 1.25 1.12 1.00 0.900 0.800 0.710 0.630 0.560 0.500 0.450 0.400 0.315 0.280 0.224 0.200 0.160 0.140 0.125 0.100 0.090 0.071 0.063 0.050 0.045 0.036 0.032 0.030 0.028 0.025 0.020 A - These Standard designations correspond to the values for test sieve openings recommended by the International Standards Organization, Geneva, Switzerland, except where noted. B - Only approximately equivalent to the metric values in Column 1. C - The average diameter of the wires in the x and y direction, measured separately, of any wire cloth shall not deviate from the nominal values by more than +/- 15%. D - These sieves are not in the standard series but they have been included because they are in common usage. E - These numbers (3-1/2 to 635) are the approx. number of openings per linear in. but it is preferred that the sieve be identified by the standard designation in millimeters or micronmeters. F - 1000 µm - 1 mm 3 8" DIAMETER TEST SIEVES DESIGNATION STAINLESS FRAME — STAINLESS CLOTH U.S.A. METRIC FULL HT. PART # 4" 3-1/2" 3" 2-1/2" 2.12" 2" 1-3/4" 1-1/2" 1-1/4" 1.06" 1" 7/8" 3/4" 5/8" .530" 1/2" 7/16" 3/8" 5/16" .265" 1/4" No. 3-1/2 No. 4 No. 5 No. 6 *1/8" No. 7 No. 8 No. 10 No. 12 No. 14 No. 16 No. 18 No. 20 No. 25 No. 30 No. 35 No. 40 No. 45 No. 50 No. 60 No. 70 No. 80 No. 100 No. 120 No. 140 No. 170 No. 200 No. 230 No. 270 No. 325 No. 400 No. 450 No. 500 No. 635 00 mm 90 mm 75 mm 63 mm 53 mm 50 mm 45 mm 37.5 mm 31.5 mm 26.5 mm 25.0 mm 22.4 mm 19.0 mm 16.0 mm 13.2 mm 12.5 mm 11.2 mm 9.5 mm 8.0 mm 6.7 mm 6.3 mm 5.6 mm 4.75 mm 4.0 mm 3.35 mm 3.15 mm 2.8 mm 2.36 mm 2.0 mm 1.7 mm 1.4 mm 1.18 mm 1.0 mm 850 micron 710 micron 600 micron 500 micron 425 micron 355 micron 300 micron 250 micron 212 micron 180 micron 150 micron 125 micron 106 micron 90 micron 75 micron 63 micron 53 micron 45 micron 38 micron 32 micron 25 micron 20 micron 5167 5168 5169 5170 5171 5172 5173 5174 5175 5176 5177 5178 5179 5180 5181 5182 5183 5184 5185 5186 5187 5188 5189 5190 5191 2058 5192 5193 5194 5195 5196 5197 5198 5199 5200 5201 5202 5203 5204 5205 5206 5207 5208 5209 5210 5211 5212 5213 5214 5215 5216 5217 5256 5218 5257 HALF HT. PART # BRASS FRAME — STAINLESS CLOTH FULL HT. PART # HALF HT. PART # 4835 4836 4837 4838 4839 4840 4841 4842 4843 4844 4845 4846 4847 4848 4849 4850 4851 4852 4853 4854 4855 4856 4857 4858 4859 3281 4860 4861 4862 4863 4864 4865 4866 4867 4868 4869 4870 4871 4872 4873 4874 4875 4876 4877 4878 4879 4880 4881 4882 4883 4884 4885 4887 4886 2295 — — — — — — — — — — — — — — — — — — — — 5021 5022 5023 5024 5025 2059 5026 5027 5028 5029 5030 5031 5032 5033 5034 5035 5036 5037 5038 5039 5040 5041 5042 5043 5044 5045 5046 5047 5048 5049 5050 5051 2113 5052 2296 — — — — — — — — — — — — — — — — — — — — 5353 5354 5355 5356 5357 3279 5358 5359 5360 5361 5362 5363 5364 5365 5366 5367 5368 5369 5370 5371 5372 5373 5374 5375 5376 5377 5378 5379 5380 5381 5382 5383 5389­ 5384 5391 • Overall Height – Full: 2-5/8"; Half: 1-5/8". TOP COVERS • Depth to Cloth – Full: 2"; Half: 1". • See Pages 12 and 13 for value added NIST Traceable Certification Services. Stainless Stainless w. Ring Brass Brass w. Ring Note: 35 mesh backing cloth is available on test sieves 100 mesh and finer. *1/8" opening is not included in ASTM E 11 Standard. 4 www.wstyler.com BRASS FRAME — BRASS CLOTH FULL HT. PART # 4529 4530 4531 4532 4533 4534 4535 4536 4537 4538 4539 4540 4541 4542 4543 4544 4545 4546 4547 4548 4549 4550 4551 4552 ITEM BOTTOM PANS HALF HT. PART # 4695 4696 4697 4698 4699 4700 4701 4702 4703 4704 4705 4706 4707 4708 4709 4710 4711 4712 4713 4714 4715 4716 4717 4718 PART # 8496 8497 8487 8488 ITEM PART # Brass – Full Ht. Brass – Half Ht. Brass w. Skirt – Full Ht. Brass w. Skirt – Half Ht. 8481 8482 8483 8484 Stainless – Full Ht. Stainless – Half Ht. Stainless w. Skirt – Full Ht. Stainless w. Skirt – Half Ht. 8491 8492 8493 8494 12" DIAMETER TEST SIEVES DESIGNATION U.S.A. 4" 3-1/2" 3" 2-1/2" 2.12" 2" 1-3/4" 1-1/2" 1-1/4" 1.06" 1" 7/8" 3/4" 5/8" .530" 1/2" 7/16" 3/8" 5/16" .265" 1/4" No.3-1/2 No. 4 No. 5 No. 6 *1/8" No. 7 No. 8 No. 10 No. 12 No. 14 No. 16 No. 18 No. 20 No. 25 No. 30 No. 35 No. 40 No. 45 No. 50 No. 60 No. 70 No. 80 No. 100 No. 120 No. 140 No. 170 No. 200 No. 230 No. 270 No. 325 No. 400 No. 450 No. 500 METRIC 100 mm 90 mm 75 mm 63 mm 53 mm 50 mm 45 mm 37.5 mm 31.5 mm 26.5 mm 25.0 mm 22.4 mm 19.0 mm 16.0 mm 13.2 mm 12.5 mm 11.2 mm 9.5 mm 8.0 mm 6.7 mm 6.3 mm 5.6 mm 4.75 mm 4.0 mm 3.35 mm 3.15 mm 2.8 mm 2.36 mm 2.0 mm 1.7 mm 1.4 mm 1.18 mm 1.0 mm 850 micron 710 micron 600 micron 500 micron 425 micron 355 micron 300 micron 250 micron 212 micron 180 micron 150 micron 125 micron 106 micron 90 micron 75 micron 63 micron 53 micron 45 micron 38 micron 32 micron 25 micron STAINLESS FRAME — STAINLESS CLOTH FULL HT. PART # 6635 6636 6637 6638 6639 6640 6641 6642 6643 6644 6645 6646 6647 6648 6649 6650 6651 6652 6653 6654 6655 6656 6657 6658 6659 2761 6660 6661 6662 6663 6664 6665 6666 6667 6668 6669 6670 6671 6672 6673 6674 6675 6676 6677 6678 6679 6680 6681 6682 6683 6684 6685 6762 6686 INTER. HT. HALF HT. PART # PART # 2300 9109 2155 9281 2301 9282 6705 9193 9194 2302 9195 6704 9196 9411 9431 9197 6702 9198 6703 2303 9199 2218 9280 9098 9113 — 9099 9100 9214 9136 9271 9148 9079 9080 9081 9082 9083 9084 9085 9086 9087 9149 9215 9088 9089 9010 9090 9091 9092 9093 9094 9013 2304 9212 6801 6802 6803 6804 6805 6806 6807 6808 6809 6810 6811 6812 6813 6814 6815 6816 6817 6818 6819 6820 6821 6822 6823 6824 6825 2486 6826 6827 6828 6829 6830 6831 6832 6833 6834 6835 6836 6837 6838 6839 6840 6841 6842 6843 6844 6845 6846 6847 6848 6849 6850 6851 6856 6852 FULL HT. INTER. HT. PART # PART # • Overall Height – Full: 4-1/4"; Intermediate: 3"; Half: 2-5/8". • Depth to Cloth – Full: 3-1/4"; Intermediate: 2"; Half: 1-5/8". • See Pages 12 and 13 for value added NIST Traceable Certification Services. Note: 35 mesh backing cloth is available on test sieves 100 mesh and finer. See pages 14 - 19 for Ro-Tap Shakers and accessories. BRASS FRAME — STAINLESS CLOTH 6967 6968 6969 6970 6971 6972 6973 6974 6975 6976 6977 6978 6979 6982 6981 6982 6983 6984 6985 6986 6987 6988 6989 6990 6691 2573 6992 6993 6994 6995 6996 6997 6998 6999 7000 7001 7002 7003 7004 7005 7006 7007 7008 7009 7010 7011 7012 7013 7014 7015 7016 7017 2299 7018 7200 7201 7202 7203 7204 7205 7206 7207 7208 7209 7210 7211 7212 7213 7214 7215 7216 7217 7218 7219 7220 7221 7222 7223 7224 2486 7225 7226 7227 7228 7229 7230 7231 7232 7233 7234 7235 7236 7237 7238 7239 7240 7241 7242 7243 7244 7245 7246 7247 7248 7249 7250 7251 7252 BRASS FRAME — BRASS CLOTH HALF HT. PART # 2297 2298 7135 7136 7137 7138 7139 7140 7141 7142 7143 7144 7145 7146 7147 7148 7149 7150 7151 7152 7153 7154 7155 7156 7157 3293 7158 7159 7160 7161 7162 7163 7164 7165 7166 7167 7168 7169 7170 7171 7172 7173 7174 7175 7176 7177 7178 7179 7180 7181 7182 7183 2153 7184 FULL HT. PART # HALF HT. PART # 6329 6330 6331 6332 6333 6334 6335 6336 6337 6338 6339 6340 6341 6342 6343 6344 6345 6346 6347 6348 6349 6350 6351 6352 6495 6496 6497 6498 6499 6500 6501 6502 6503 6504 6505 6206 6507 6508 6509 6510 6511 6512 6513 6514 6515 6516 6517 6518 TOP COVERS ITEM PART # Stainless Stainless w. Ring Brass Brass w. Ring 8536 8537 8530 8531 BOTTOM PANS ITEM PART # Brass – Full Ht. Brass – Half Ht. Brass w. Skirt – Full Ht. Brass w. Skirt – Half Ht. 8526 8527 8528 8529 Stainless – Full Ht. Stainless – Half Ht. Stainless w. Skirt – Full Ht. Stainless w. Skirt – Half Ht. 8532 8533 8534 8535 www.wstyler.com 5 3" DIAMETER TEST SIEVES STAINLESS FRAME — STAINLESS CLOTH DESIGNATION U.S.A No. 3-1/2 No. 4 No. 5 No. 6 No. 7 No. 8 No. 10 No. 12 No. 14 No. 16 No. 18 No. 20 No. 25 No. 30 No. 35 No. 40 No. 45 No. 50 No. 60 No. 70 No. 80 No. 100 No. 120 No. 140 No. 170 No. 200 No. 230 No. 270 No. 325 No. 400 No. 450 No. 500 No. 635 • • • BRASS FRAME — STAINLESS CLOTH METRIC FULL HT. PART # HALF HT. PART # FULL HT. PART # 5.6 mm 4.75 mm 4.0 mm 3.35 mm 2.8 mm 2.36 mm 2.0 mm 1.7 mm 1.4 mm 1.18 mm 1.0 mm 850 micron 710 micron 600 micron 500 micron 425 micron 355 micron 300 micron 250 micron 212 micron 180 micron 150 micron 125 micron 106 micron 90 micron 75 micron 63 micron 53 micron 45 micron 38 micron 32 micron 25 micron 20 micron 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314 1324 1315 1325 1700 1701 1702 1703 1704 1705 1706 1707 1708 1709 1710 1711 1712 1713 1714 1715 1716 1717 1718 1719 1720 1721 1722 1723 1724 1725 1726 1727 1728 1729 1730 1731 1732 1534 1535 1536 1537 1538 1539 1540 1541 1542 1543 1544 1545 1546 1547 1548 1549 1550 1551 1552 1553 1554 1555 1556 1557 1558 1559 1560 1561 1562 1563 1565 1564 1566 HALF HT. PART # 1617 1618 1619 1620 1621 1622 1623 1624 1625 1626 1627 1628 1629 1630 1631 1632 1633 1634 1635 1636 1637 1638 1639 1640 1641 1642 1643 1644 1645 1646 1648 1647 1649 Overall Height – Full: 1-3/4"; Half: 1-1/4". Depth to Cloth – Full: 1-1/4"; Half: 5/8". See Pages 12 and 13 for NIST Traceable Certification Services. TOP COVERS ITEM PART # Brass Brass w. Ring 8405 8406 BOTTOM PANS ITEM PART # Brass - Full Ht. Brass - Half Ht. Brass w. Skirt - Full Ht. Brass w. Skirt - Half Ht. 8401 8402 8403 8404 Stainless Stainless w. Ring 8411 8412 Stainless – Full Ht. Stainless – Half Ht. Stainless w. Skirt – Full Ht. Stainless w. Skirt – Half Ht. 8407 8408 8409 8410 GOLD SERIES TEST SIEVES • Guarantees that the permissable variation of average opening as allowed by ASTM E-11 is reduced by 50%. • Designed as “masters” for internal quality assurance programs (8" diameter). • Each test sieve is optically examined, serialized, and supplied with complete NIST traceable documents. 6 www.wstyler.com DESIGNATION U.S.A. METRIC No. 20 No. 25 No. 30 No. 35 No. 40 No. 45 No. 50 No. 60 No. 70 No. 80 No. 100 No. 120 No. 140 No. 170 No. 200 No. 230 No. 270 No. 325 No. 400 No. 500 850 micron 710 micron 600 micron 500 micron 425 micron 355 micron 300 micron 250 micron 212 micron 180 micron 150 micron 125 micron 106 micron 90 micron 75 micron 63 micron 53 micron 45 micron 38 micron 25 micron STAINLESS FRAME-STAINLESS CLOTH FULL HT. PART # HALF HT. PART # 5199G 5200G 5201G 5202G 5203G 5204G 5205G 5206G 5207G 5208G 5209G 5210G 5211G 5212G 5213G 5214G 5215G 5216G 5217G 5218G 5365G 5366G 5367G 5368G 5369G 5370G 5371G 5372G 5373G 5374G 5375G 5376G 5377G 5378G 5379G 5380G 5381G 5382G 5383G 5384G 200mm DIAMETER TEST SIEVES DESIGNATION METRIC U.S.A 37.5 mm 31.5 mm 28.0 mm 26.5 mm 25.0 mm 22.4 mm 20.0 mm 19.0 mm 18.0 mm 16.0 mm 14.0 mm 13.2 mm 12.5 mm 11.2 mm 10.0 mm 9.5 mm 9.0 mm 8.0 mm 7.1 mm 6.7 mm 6.3 mm 5.6 mm 5.0 mm 4.75 mm 4.5 mm 4.0 mm 3.55 mm 3.35 mm 3.15 mm 2.8 mm 2.5 mm 2.36 mm 2.24 mm 2.0 mm 1.8 mm 1.7 mm 1.6 mm 1.4 mm 1.25 mm 1.18 mm 1.12 mm 1.00 mm 900 micron 850 micron 800 micron 710 micron 630 micron 600 micron 560 micron 500 micron 450 micron 425 micron 400 micron 355 micron 315 micron 300 micron 280 micron 250 micron 224 micron 212 micron 200 micron 180 micron 160 micron 150 micron 140 micron 125 micron 112 micron 106 micron 100 micron 90 micron 80 micron 75 micron 71 micron 63 micron 56 micron 53 micron 50 micron 45 micron 40 micron 38 micron 36 micron 32 micron 25 micron 20 micron 1-1/2" 1-1/4" — 1.06" 1" 7/8" — 3/4" — 5/8" — .530" 1/2" 7/16" — 3/8" — 5/16" — .265" 1/4" No. 3 1/2" — No. 4 — No. 5 — No. 6 — No. 7 — No. 8 — No. 10 — No. 12 — No. 14 — No. 16 — No. 18 — No. 20 — No. 25 — No. 30 — No. 35 — No. 40 — No. 45 — No. 50 — No. 60 — No. 70 — No. 80 — No. 100 — No. 120 — No. 140 — No. 170 — No. 200 No. 230 — No. 270 — No. 325 — No. 400 — No. 450 No. 500 No. 635 STAINLESS FRAME — STAINLESS CLOTH FULL HT. PART # 7256 7257 7258 7259 7260 7261 7262 7363 7264 7265 7266 7267 7268 7269 7270 7271 7272 7273 7274 7275 7276 7277 7278 7279 7280 7281 7282 7283 7284 7285 7286 7287 7288 7289 7290 7291 7292 7293 7294 7295 7296 7297 7298 7299 7300 7301 7302 7303 7304 7305 7306 7307 7308 7309 7310 7311 7312 7313 7314 7315 7316 7317 7318 7319 7320 7321 7322 7323 7324 7325 7326 7327 7328 7329 7330 7331 7332 7333 7334 7335 7336 7337 7338 7339 HALF HT. PART # 7340 7341 7342 7343 7344 7345 7346 7347 7348 7349 7350 7351 7352 7353 7354 7355 7356 7357 7358 7359 7360 7361 7362 7363 7364 7365 7366 7367 7368 7369 7370 7371 7372 7373 7374 7375 7376 7377 7378 7379 7380 7381 7382 7383 7384 7385 7386 7387 7388 7389 7390 7391 7392 7393 7394 7395 7396 7397 7398 7399 7400 7401 7402 7403 7404 7405 7406 7407 7408 7409 7410 7411 7412 7413 7414 7415 7416 7417 7418 7419 7420 7421 7422 7423 BRASS FRAME — STAINLESS CLOTH FULL HT. PART # HALF HT. PART # 9714 9715 9716 9717 9718 9719 9720 9721 9722 9723 9724 9725 9726 9727 9728 9729 9730 9731 9732 9733 9734 9735 9736 9737 9738 9739 9740 9741 9742 9508 9509 9510 9511 9512 9513 9514 9515 9516 9517 9518 9519 9520 9521 9522 9523 9524 9525 9526 9527 9528 9529 9530 9531 9532 9533 9534 9535 9536 9537 9538 9539 9540 9541 9542 9543 9544 9545 9546 9547 9548 9549 9550 9551 9552 9553 9554 9555 9556 9557 9558 9794 9795 9797 9799 9814 9815 9816 9817 9818 9819 9820 9821 9822 9823 9824 9825 9826 9827 9828 9829 9830 9831 9832 9833 9834 9835 9836 9837 9838 9839 9840 9841 9842 9608 9609 9610 9611 9612 9613 9614 9615 9616 9617 9618 9619 9620 9621 9622 9623 9624 9625 9626 9627 9628 9629 9630 9631 9632 9633 9634 9635 9636 9637 9638 9639 9640 9641 9642 9643 9644 9645 9646 9647 9648 9649 9650 9651 9652 9653 9654 9655 9656 9657 9658 9894 9895 9897 9899 See Pages 12 & 13 for NIST Traceable Certification Services. 300 mm diameter Test Sieves are available in Stainless Frame and Stainless Cloth only. Call for details. • Conforms to current ISO 3310-1 and BS410 Specifications . • Overall Height – Full: 2-5/8"; Half: 1-7/8" . • Depth to Cloth – Full: 2"; Half: 1" . Note: 35 mesh backing cloth is available on test sieves 100 mesh and finer. TOP COVERS ITEM PART # Stainess 9902 Brass 9902M BOTTOM PANS ITEM PART # Stainless Full Height Stainless Half Height 9901 9903 Brass Full Height Brass Half Height 9901M 9903M www.wstyler.com 7 6" DIAMETER TEST SIEVES DESIGNATION U.S.A. METRIC 1" 7/8" 3/4" 5/8" .530" 1/2" 7/16" 3/8" 5/16" .265" 1/4" No. 3-1/2 No. 4 No. 5 No. 6 No. 7 No. 8 No. 10 No. 12 No. 14 No. 16 No. 18 No. 20 No. 25 No. 30 No. 35 No. 40 No. 45 No. 50 No. 60 No. 70 No. 80 No. 100 No. 120 No. 140 No. 170 No. 200 No. 230 No. 270 No. 325 No. 400 No. 450 No. 500 25.0 mm 22.4 mm 19.0 mm 16.0 mm 13.2 mm 12.5 mm 11.2 mm 9.5 mm 8.0 mm 6.7 mm 6.3 mm 5.6 mm 4.75 mm 4.0 mm 3.35 mm 2.80 mm 2.36 mm 2.0 mm 1.7 mm 1.4 mm 1.18 mm 1.0 mm 850 micron 710 micron 600 micron 500 micron 425 micron 355 micron 300 micron 250 micron 212 micron 180 micron 150 micron 125 micron 106 micron 90 micron 75 micron 63 micron 53 micron 45 micron 38 micron 32 micron 25 micron TOP COVERS ITEM Stainless Stainless w. Ring BOTTOM PANS ITEM Stainless – Full Ht. Stainless w. Skirt – Full Ht. 10" DIAMETER TEST SIEVES STAINLESS FRAME– STAINLESS CLOTH FULL HT. PART # 3845 3846 3847 3848 3849 3850 3851 3852 3853 3854 3855 3856 3857 3858 3859 3860 3861 3862 3863 3864 3865 3866 3867 3868 3869 3870 3871 3872 3873 3874 3875 3876 3877 3878 3879 3880 3881 3882 3883 3884 3885 3889 3386 DESIGNATION HALF HT. PART # — — — — — — — — — — — 4022 4023 4024 4025 4026 4027 4028 4029 4030 4031 4032 4033 4034 4035 4036 4037 4038 4039 4040 4041 4042 4043 4044 4045 4046 4047 4048 4049 4050 4051 4053 4052 U.S.A. 4" 3-1/2" 3" 2-1/2" 2.12" 2" 1-3/4" 1-1/2" 1-1/4" 1.06" 1" 7/8" 3/4" 5/8" .530" 1/2" 7/16" 3/8" 5/16" .265" 1/4" No. 3-1/2 No. 4 No. 5 No. 6 No. 7 No. 8 No. 10 No. 12 No. 14 No. 16 No. 18 No. 20 No. 25 No. 30 No. 35 No. 40 No. 45 No. 50 No. 60 No. 70 No. 80 No. 100 No. 120 No. 140 No. 170 No. 200 PART # METRIC 100 mm 90 mm 75 mm 63 mm 53 mm 50 mm 45 mm 37.5 mm 31.5 mm 26.5 mm 25.0 mm 22.4 mm 19.0 mm 16.0 mm 13.2 mm 12.5 mm 11.2 mm 9.5 mm 8.0 mm 6.7 mm 6.3 mm 5.6 mm 4.75 mm 4.0 mm 3.35 mm 2.80 mm 2.36 mm 2.0 mm 1.7 mm 1.4 mm 1.18 mm 1.0 mm 850 micron 710 micron 600 micron 500 micron 425 micron 355 micron 300 micron 250 micron 212 micron 180 micron 150 micron 125 micron 106 micron 90 micron 75 micron STAINLESS FRAME– STAINLESS CLOTH PART # 5799 5800 5801 5802 5803 5804 5805 5806 5807 5808 5809 5810 5811 5812 5813 5814 5815 5816 5817 5818 5819 5820 5821 5822 5823 5824 5825 5826 5827 5828 5829 5830 5831 5832 5833 5834 5835 5836 5837 5838 5839 5840 5841 5842 5843 5844 5845 TOP COVERS ITEM 8471 8472 Stainless Stainless w. Ring PART # 8516 8517 PART # 8467 8469 BOTTOM PANS ITEM Stainless – Full Ht. • Overall Height – Full: 2-5/8"; Half: 1-7/8". • Depth to Cloth – Full: 1-3/4"; Half: 1". Stainless w. Skirt – Full Ht. • PART # 8512 8514 Overall Height – Full: 4" Note: 35 mesh backing cloth is available on test sieves 100 mesh and finer. Note: 35 mesh backing cloth is available on test sieves 100 mesh and finer. *1/8" opening is not included in ASTM E 11 Standard. *1/8" opening is not included in ASTM E 11 Standard. See Pages 12 & 13 for Value Added NIST Traceable Certification Services. 8 www.wstyler.com 18" DIAMETER TEST SIEVES BRASS FRAME — STAINLESS CLOTH DESIGNATION U.S.A. 4" 3-1/2" 3" 2-1/2" 2.12" 2" 1-3/4" 1-1/2" 1-1/4" 1.06" 1" 7/8" 3/4" 5/8" .530" 1/2" 7/16" 3/8" 5/16" .265" 1/4" No. 3-1/2 No. 4 No. 5 No. 6 No. 7 No. 8 No. 10 No. 12 No. 14 No. 16 No. 18 No. 20 No. 25 No. 30 No. 35 No. 40 No. 45 No. 50 No. 60 No. 70 No. 80 No. 100 No. 120 No. 140 No. 170 No. 200 No. 230 METRIC PART # 100 mm 90 mm 75 mm 63 mm 53 mm 50 mm 45 mm 37.5 mm 31.5 mm 26.5 mm 25.0 mm 22.4 mm 19.0 mm 16.0 mm 13.2 mm 12.5 mm 11.2 mm 9.5 mm 8.0 mm 6.7 mm 6.3 mm 5.6 mm 4.75 mm 4.0 mm 3.35 mm 2.80 mm 2.36 mm 2.0 mm 1.7 mm 1.4 mm 1.18 mm 1.0 mm 850 micron 710 micron 600 micron 500 micron 425 micron 355 micron 300 micron 250 micron 212 micron 180 micron 150 micron 125 micron 106 micron 90 micron 75 micron 63 micron 7503 7504 7505 7506 7507 7508 7509 7510 7511 7512 7513 7514 7515 7516 7517 7518 7519 7520 7521 7522 7523 7524 7525 7526 7527 7528 7529 7530 7531 7532 7533 7534 7535 7536 7537 7538 7539 7540 7541 7542 7543 7544 7545 7546 7547 7548 7549 7550 TOP COVERS ITEM PART # Brass 8558 BOTTOM PANS ITEM PART # Brass-Full Ht. 8556 • Overall Height – 5-1/2" • Depth to Cloth – 4-1/2" Note: 35 mesh backing cloth is available on test sieves 100 mesh and finer. Customer Service 800.321.6188 SPECIAL TEST SIEVE PRODUCTS All Wet Wash Test Sieves are constructed either in the more durable all stainless steel or with a brass frame and stainless steel sieve cloth. Available in US #4 – 325 meshes. ITEM 8" Diameter Test Sieve with 4-5/8" All Stainless Steel overall height and 4-1/8" depth to cloth Brass Frame/Stainless Steel mesh ITEM 8" Diameter Test Sieve with 8-5/8" All Stainless Steel overall height and 8-1/8" depth to cloth Brass Frame/Stainless Steel mesh ITEM 3" Diameter Test Sieve with 4" overall All Stainless Steel height and 3-1/2" depth to cloth Brass Frame/Stainless Steel mesh ITEM 12" Diameter Test Sieve with 9" All Stainless Steel overall height and 8" depth to cloth Brass Frame/Stainless Steel mesh • All test sieves above include drain holes in lower frame. • 35 mesh backing is recommended for U.S.A. #200 and finer ***************** TEST SIEVE CLEANING BRUSHES Nylon Model For cleaning sieves having 120 mesh and finer. Brass Model For cleaning sieves having 100 mesh and coarser. PART # PART # 8577 Nylon 8576 Brass www.wstyler.com 9 AIR JET TEST SIEVES DESIGNATION U.S.A No. 8 No. 10 No. 12 No. 14 No. 16 No. 18 No. 20 No. 25 No. 30 No. 35 No. 40 No. 45 No. 50 No. 60 No. 70 No. 80 No. 100 No. 120 No. 140 No. 170 No. 200 No. 230 No. 270 No. 325 No. 400 No. 450 No. 500 No. 635 METRIC 2.36 mm 2.0 mm 1.7 mm 1.4 mm 1.18 mm 1.0 mm 850 micron 710 micron 600 micron 500 micron 425 micron 355 micron 300 micron 250 micron 212 micron 180 micron 150 micron 125 micron 106 micron 90 micron 75 micron 63 micron 53 micron 45 micron 38 micron 32 micron 25 micron 20 micron NEW! STAINLESS FRAME — STAINLESS CLOTH PART # 9423 9418 9424 9425 9152 9321 9153 9250 9154 9056 9016 9251 9142 9143 9252 9101 9186 9253 9015 9014 9003 9004 9102 9011 9133 9410 9202 9415 • 200mm in diameter. • Overall Height – 1-3/4". • Depth to Cloth – 1-1/8". • For use with Air Jet Sieving Systems. • Each Test Sieve is supplied with a Serial Number and a matching Test Sieve Certificate of Compliance. • See Pages 12 and 13 for NIST Traceable Certification Services. Customer Service 800.321.6188 ALPINE SMART SIEVES for e200LS Designation • • • • • 10 200 mm diameter Overall height - 1" Depth to cloth - 7/8" For use with e200LS ID chip for instant recognition www.wstyler.com No. 5 No. 6 No. 7 No. 8 No. 10 No. 12 No. 14 No. 16 No. 18 No. 20 No. 25 No. 30 No. 35 No. 40 No. 45 No. 50 No. 60 No. 70 No. 80 No. 100 No. 120 No. 140 No. 170 No. 200 No. 230 No. 270 No. 325 No. 400 No. 450 No. 500 No. 635 Part No. 522260 522262 522265 522267 522269 522272 522274 522276 522278 522214 522216 522219 522221 522223 522226 522228 522230 522233 522235 522237 522239 522241 522243 522245 522247 522250 522252 522254 522257 522258 522259 TYLER SIEVING SOFTWARE 3.0 W.S. TYLER is excited to introduce Sieve Software 3.0. The product was designed as a fast and simple tool to record, print and save data from a traditional Test Sieve Analysis. The user- friendly spreadsheet format allows the user to personalize the files and detail each sieve test. The technician must enter the sieve series required and the sample weight retained on each sieve following the test run. The software will perform the rest of the calculations and create statistical and graphical displays for analysis. The Tyler Sieving Software 3.0 simplifies the Test Sieving process and is affordably priced. SIEVING SOFTWARE 3.0 Part # SS-300 ALPINE e200 LS The Hosokawa ALPINE Air Jet Sieve e200 LS has an attractive ergonomic design and fits nicely on a work bench. A high resolution 6.4” TFT touch screen allows intuitive operation with its easy-to-follow user interface. The integrated analysis guide leads you through comparison analysis, trend analyses for statistics, language switch-over, and setting of country-specific measurement units. Data evaluation is given in tabular form (graphic form with eControl Professional and eControl Ultimate). SOFTWARE OPTIONS • eControl Basic Simple sieving user level for quick individual analysis. Intuitive menu guidance makes for easy and reliable operation. Can be upgraded to higher software versions. • eControl Professional Expanded package that includes interface with a balance and additional graphic display abilities. Graphic evaluation is plotted in a cumulative curve. Can be upgraded to higher software version. • eControl Ultimate For special demands that includes traceability, such as for pharmaceuticals. Representation of residual fines concentration and relevant information. Call Customer Service 800.321.6188 for pricing. www.wstyler.com 11 LABORATORY SERVICES CERTIFIED TEST SIEVE (ASTM E11-09 Equivalent - Inspection Grade): • • • • • New and in-use Test Sieves. Opening measured with a computerized video imaging system, + / - .5 micron. Examined to the current ASTM and ISO specifications. Products are serialized and supplied with NIST traceable documents, including statistical information on opening sizes and wire diameters (see sample IBC). Part # 9998 CERTIFIED PLUS TEST SIEVE (ASTM E11-09 Equivalent - Calibration Grade): • New and in-use Test Sieves. • Openings measured with a Computerized Video Imaging System, (+ / - .5 micron). • Examined to the current ASTM or ISO Specifications. • Increased # of measurements provide a 99.73% level of confidence (K-Factor) vs the Inspection grade Test Sieve. • Products are serialized and supplied with NIST traceable documents, including statistical information on opening sizes and wire diameters. • Part # 9992 RECOMMENDED IN-USE SIEVE RECERTIFICATION SCHEDULE Aperture 5 inches to .25 inches US No. 31/2 to US No. 12 US No. 14 to US No. 40 US No. 45 to US No. 140 US No. 170 to US No. 325 US No. 400 to US No. 635 * Whichever comes last 12 www.wstyler.com Schedule* 80 uses or 36 months 70 uses or 30 months 60 uses or 24 months 50 uses or 18 months 35 uses or 12 months 20 uses or 6 months Customer Service 800.321.6188 LABORATORY SERVICES PARTICLE ANALYSIS SERVICES • Fine, dry applications from 2" through 635 mesh (20 micron). • Service includes detailed analysis results. • Part # 9995 MATCHED / CERTIFIED TEST SIEVE • Individually performance tested against W.S. Tyler Master Series Sieves. • Performance test result tolerances, +/- 2.5% . • Certified including NIST Traceable and Performance Test Documents. • Designed for critical multiple location comparison analysis. • U.S.A. No. 8 through U.S.A. No. 325, 8" diameter Stainless Steel Cloth Sieves. • Part # 9991 www.wstyler.com 13 RO-TAP® TEST SIEVE SHAKERS RX-29 and RX-30 Models The industry standard in test sieve shakers, W.S. Tyler’s Ro-Tap has a unique two-dimensional operation: a horizontal, circular motion and a vertical, tapping motion. This special action allows material particles to stratify and “seek” critical openings in the test media. This unit provides the most accurate and consistent particle analysis testing. The RX-29 model is designed for testing with 8" diameter test sieves; the RX-30 model is designed for testing with 12" diameter test sieves. • Testing applications — RX-29: 2" down through 635 mesh (20 micron); RX-30: 4" down through 500 mesh (25 micron) • Requires minimal maintenance • Heavy-duty use • Features 99 minute digital timer/clock, tolerance, 0.1 second • Each unit is test run and serialized prior to shipment SPECIFICATIONS • Oscillations per Minute: 278 ±10 • Oscillations Displacement: 1-1/8" x 7/16" • Taps per Minute: 150±10 Lab Kits consisting of Ro-Tap, sound enclosure and test stand are available at a discounted price. Call for details. NUMBER OF SIEVES FULL HEIGHT HALF HEIGHT MODEL RX-29 (8" or 200mm Dia.) 6 Sieves w/FH Pan RX-30 (12" or 300mm Dia.) 4 Sieves w/FH Pan 6 Sieves w/HH Pan* PART # Test Sieves sold separately. 13 Sieves w/HH Pan Dimensions — Unit: 28" wide x 21" deep x 25" high (71cm x 54cm x 64cm) 8 Sieves w/HH Pan Unit: 180 lbs. (82 kg) Weight — AT 1725 RPM, 60 CYCLE CURRENT DESCRIPTION PART # AT 1425 RPM, 50 CYCLE CURRENT DESCRIPTION RX-29 115v (8" Test Sieves) RX-29-2 115v (8" Test Sieves) RX-29-16 230v (8" Test Sieves) RX-29-10 230v (8" Test Sieves) RX-30 115v (12" Test Sieves) RX-30-2 115v (12" Test Sieves) RX-30-16 230v (12" Test Sieves) RX-30-10 230v (12" Test Sieves) All models are wired for single phase current. RO-TAP® Conversion Kits KIT PART NO. 14 www.wstyler.com DESCRIPTION RX-32 Ro-Tap 12" Diameter to 8" Diameter Test Sieve Kit R-30033-1 Ro-Tap 8" Diameter to 3" Diameter Test Sieve Kit R-40038 Ro-Tap Digital Timer Conversion Kit — 115 Volt R-40039 Ro-Tap Digital Timer Conversion Kit — 230 Volt RO-TAP® SIEVE SHAKER MAINTENANCE KITS COMPLETE PARTS LIST PGS. 20 – 25 To ensure lasting dependable service, RO-TAP Sieve Shakers must occasionally be upgraded with parts that are long-wearing, durable, and cost-effective. Maintenance kits are available for the replacement of parts due to normal wear and tear. W.S. Tyler – recommends the use of these kits as a means to minimize down-time due to minor repairs. The purchase of a minor maintenance kit is also recommended with each new RO-TAP Sieve Shaker. PART NO. DESCRIPTION 10121 RX-29, RX-30, & RX-94 RX-29, RX-30, & RX-94 10122 RX-29 Major Maintenance Kit 10123 RX-94 Major Maintenance Kit INCLUDES 2 Eccentric Discs (R-10034), 1 Flange Bushing (R-10061), 1 Bearing (R-10062), 1 Cork (R-10066A), and 2 Flange Bearings (R-10063) 1 Minor Maintenance Kit (10121), 1 Timing Belt (R-10058), 1 Upper Carrying Plate (R-30008), 1 Cam Gear (R-20039), and 1 Timing Belt Pulley (R-30015) Kit Part No. 10122 except Upper Carrying Plate * Prices reflect discount versus purchasing the items separately. RO-TAP® E SIEVE SHAKERS RO-TAP® RX-29-E and RO-TAP® RX-30-E Models: The RO-TAP Electronic Test Sieve Shaker operates with 8” or 12" diameter Test Sieves and offers precise sieving results. The compact, RO-TAP RX-29-E (8" Test Sieves) unit requires minimal space on a laboratory countertop. The RO-TAP RX-30-E (12" Test Sieves) model is a floor unit. Controls can be remotely mounted for convenient operation. The units are designed for light to medium testing applications. The Standard Model Features: NEW NEW • Controlled Constant Amplitude Design Coming • Digital Controls SOON! • Quick Release Hold Downs • Fine and Coarse Analysis Control Settings Test Sieves sold separately. Dimensions: Unit: Weight – Unit: Power Options: Model E 8" (hold 9 full height or 15 half height w/pan) 14” wide x 12” deep x 37” high 80 lbs. (36 kg) 110 v. (220v pricing on request) Dimensions: Unit: Shipping: Weight – Unit: Power Options: Model E 12" (hold 7 full height or 10 half height w/pan) 16” wide x 18” deep x 40” high 31" wide x 31" deep x 39" high 117 lbs. (53 kg) 110 v. (220v pricing on request) PART # DESCRIPTION RX-29-E RX-30-E 560210 R-30033-E Electronic 8" Shaker Electronic 12" Shaker Twin Nut Clamp Twin Nut Clamping System Kit www.wstyler.com 15 TEST SIEVE SHAKERS RO-TAP® RX-94 Model RO-TAP® RX-94 Test Sieve Shaker utilizes the same tradition- al design as the RX-29 and RX-30 models. In addition, the unit features a cavity that allows for two “stacks” of 8" diameter test sieves. This allows for twice the processing capacity in nominally the same time required to complete one test. • Designed for use with 8" diameter test sieves only. • Testing application: 2" down through 635 mesh (20 micron). • Newly designed easy lock clamping system. SPECIFICATIONS • Oscillations per Minute: 278 ±10 • Oscillation Displacement: 1-1/8" x 7/16" • Taps per Minute: 150 ±10• Hammer Weight: 5 lbs., 6 oz. Test Sieves sold separately. Recommendations regarding the maximum number of test sieves that can be used with Ro-Tap Test Sieve Shakers: MODEL RX-94 (8" or 200mm Dia.) NUMBER OF SIEVES FULL HEIGHT HALF HEIGHT 2 Stacks of 6 Sieves w/FH Pan 2 Stacks of 13 Sieves w/HH Pan A top cover is required for testing. Dimensions — PART # RX-94 RX-94-1 RX-94-2 RX-94-3 DESCRIPTION 115v. 60 Hz Current 230v. 60 Hz Current 115v. 50 Hz Current 230v. 50 Hz Current Prices do not include test sieves. All models are wired for single phase current only. Unit: 30" wide x 27" deep x 26" high (75cm x 68cm x 56cm) Shipping: 31" wide x 31" deep x 30" high (77cm x 78cm x 75cm) Weight — Unit: 220 lbs. (100 kg) Shipping: 242 lbs. (110 kg) RX-812 Coarse Sieve Shaker Model Designed to be used in coarse testing applications, the affordable RX-812 Coarse Sieve Shaker has the unique capability of using both 8" diameter and 12" diameter test sieves, simply by using the quick-change adapters provided. The RX-812 has a quiet operation and utilizes an effective action that gives consistent, accurate results. • Designed for use with 8" and 12" diameter test sieves. • Not recommended for analysis with particles 150 micron (100 mesh and finer) and smaller. Test Sieves sold separately. SPECIFICATIONS • Oscillations per Minute: 280 (60Hz); 231 (50Hz). Recommendations regarding the maximum number of test sieves that can be used with Ro-Tap Test Sieve Shakers: MODEL RX-812 (8" or 200mm Dia.) RX-812 (12" or 300mm Dia.) A top cover is required for testing. Dimensions — 16 NUMBER OF SIEVES FULL HEIGHT HALF HEIGHT 6 Sieves w/FH Pan 4 Sieves w/FH Pan 13 Sieves w/HH Pan 6 Sieves w/HH Pan* or 8 Sieves w/HH Pan * Intermediate height. PART # RX-812 RX-812-1 RX-812-2 RX-812-3 Prices do not include test sieves. All models are wired for single phase current only. Unit: 23" wide x 15" deep x 31.5" high (59cm x 38cm x 80cm) Shipping: 25" wide x 19" deep x 15" high (64cm x 49cm x 38cm) www.wstyler.com DESCRIPTION 115v. 60 Hz Current 230v. 60 Hz Current 115v. 50 Hz Current 230v. 50 Hz Current Weight — Unit: 55 lbs. (25 kg) Shipping: 95 lbs. (28 kg) RO-TAP® SOUND ENCLOSURE CABINET & TEST STAND Designed to be used exclusively with Ro-Tap Sieve Shakers, operating noise levels are reduced from approximately 85 dB to 78 dB. The cabinets are fabricated with 18 gauge steel and a 1" metal faced, acoustic foam inner liner. Specifically designed for RX-29 and RX-30 Ro-Tap Sieve and RX-812 Coarse Sieve Shaker, the Ro-Tap Test Stand can be used with or without the Sound Enclosure Cabinet. • • • • • Allows for relatively fast, simple installation and set-up of the Ro-Tap Sieve Shaker. Attractive, sturdy steel construction, with anchor brackets for fastening to floor or foundation. Allows for optimal use of available laboratory space dedicated to test sieving. CABINET MODEL # R-30050 RX-99 (Not Pictured) DESCRIPTION RX-29 & RX-30 RX-94 PARTS # R-40041 (See Picture) R-10099-30 (RX-99 only) DESCRIPTION Test Stand Cover Springs w/Ball Stud ROTARY SIFTER RX-20 • RX-20 Rotary Sifter offers classic design and efficient operation in an economical package. A proven sieving method preferred by many DOTs, based on a popular design developed many years ago. The Rotary Sifter offers a faster conversion from 8-12 inch or 200-300mm diameter sieves. The sieve stack capacity ranges from six 12 inch diameter full height sieves with pan or up to twenty 8 inch diameter half-height sieves with pan. • The totally enclosed cabinet allows safe, dust-free operation. Individual tapping hammers assist passage of near-size particles. The digital timer has an LED display which precisely times operation up to 99 minutes at +/- 1 second. The system is driven by a 1/3hp continuous-duty motor. * * * * Customer Service 800.321.6188 Accurate results Simple and efficient Dimensions: 19x24x58in Estimated ship weight: 215lb PART # DESCRIPTION RX - 20 ROTARY SIFTER www.wstyler.com 17 SIEVING ACCESSORIES ULTRASONIC TEST SIEVE CLEANER Produces ultrasonic vibrations in a cleaning fluid bath, which causes contaminants to become dislodged from both sieve frame and media. • 8" or 200mm diameter test sieves only • Compact and portable • Stainless steel oscillation tank • Built-in timer • Unit weight: 12 lbs. • Solution not included (mild detergent recommended) PART # P-1405 Dimensions — 9 1/2" diameter x 10" high (24cm x 25cm) WET TEST SIEVING KIT Allows for testing in wet environment when material is not soluble in water. (Kit does not include RO-TAP® shaker) • • For use with W.S. Tyler Ro-Tap RX-29 and RX-94 Sieve Shakers. Kit weight: 27 lbs. MODEL PART # RX-29 LA11112 RX-94 LA11194 * Test Sieving Kit includes: Cover, Pan, Hoses, Clamps. COVER WITH SPOUT PART # 8498 PAN WITH SPOUT PART # 8495 18 www.wstyler.com SAMPLING DEVICES SAMPLING SPLITTERS Reduces or halves material samples for making sieve tests. The Splitters maintain representative particle size distribution while reducing the original sample size. Dimensions — SS-50: Unit: 12" wide x 14" deep x 12" high (30cm x 36cm x 30cm) Shipping: 14" wide x 16" deep x 16" high (36cm x 41cm x 41cm) SS-100: Unit: 22" wide x 16" deep x 16" high (56cm x 41cm x 41cm) Shipping: 24" wide x 26" deep x 16" high (61cm x 66cm x 41cm) Weight — SS-50: PART # Unit: 10 lbs. (5 kg) Shipping: 16 lbs. (7 kg) SS-100: Unit: 25 lbs. (10 kg) Shipping: 35 lbs. (12 kg) DESCRIPTION SS-50 Sample Splitter w/14 1/2" Discharge Chutes SS-100 Sample Splitter w/16 1/2" Discharge Chutes MAX. PARTICLE SIZE 1/8" 1/4" SPINNING RIFFLER The RX-230 Spinning Riffler uses a vibratory feeder to provide a constant flow of material from the stainless steel hopper. The vibrating feeder then feeds the sampling tubes from 1 to 16 individual samples. Each sample can then be capped and stored immediately, with minimal handling and little chance for outside contamination. Spin riffling is the method of choice for sampling accuracy and reliability for dry, free flowing particles. This unit will virtually eliminate operator error and bias associated with other types of sampling devices. The RX-230 Spinning Riffler includes a sixteen-port dividing head, a set of sixteen standard tube sample vessels, a sample drum to contain the vessels and a hopper plate for positioning the vessels in the drum. All of these parts are available as replacement parts. Dimensions — 13" wide x 20 1/2" deep x 23" high Weight — 25 lbs. Customer Service 800.321.6188 PART # DESCRIPTION RX-230 Spinning Riffler/Dual Voltage www.wstyler.com 19 RO-TAP® RX-29 AND RX-30 PARTS DIAGRAM See Page 15 for Recommended Service Parts Kits 20 www.wstyler.com RO-TAP® RX-29 AND RX-30 PARTS ITEM NO. 1 2 3 4 5 6 7 8 9 9A 9B * 10 12 13 14 15 16 16 17 17 18 18 19 20 21 22 23 23A 24 25 26 27 29 30 31 32 33 34 35 36 37 38 39 40 41 41 42 42A 42B 43 44 45 45A 47 48 49 50 51 51A 52 53 54 55 56 60 * 60A PART NO. DESCRIPTION 107770 R-20029 R-20023 R-30019 R-30010 R-10036 R-10038 R-20027 R-30008 R-30008-1 Base Hammer Hammer Block Sheet Guard Rotating Guard Lift Rod Upper Main Shaft Washer Main Shaft Upper Carrying Plate – RX29 – plastic Upper Carrying Plate – RX-29 – Heavy-Duty Cast Aluminum Upper Carrying Plate –RX-30–steel Lower Carrying Plate Cam Gear Timing Belt Pulley Eccentric Disc. Block Sieve Cover– RX-29 Sieve Cover – RX-30 Sieve Support Plate – RX-29 Sieve Support Plate – RX-30 Sieve Support Clamp Bar – RX-29 Sieve Support Clamp Bar – RX-30 Backup Plate Bearing Plate Shield Tube Spacer Cam Shoulder Screw 1/2" I.D. Shim Main Shaft Key to Eccentric Main Shaft Key – Lower Hammer Pin Cork Plug (10 cork plugs per pack) Tie Rod Motor Adapter Grommet Lift Rod Coupling (2.50" long) Pedestal Cover Flange Bearing Bearing Flange Bearing Thrust Washer Steel Bushing 3/8 - 16 NC x 2.25" Carriage Bolt Sprocket – 14 teeth (1800 RPM) w/ Set Screw Sprocket – 17 teeth (1500 RPM) w/ Set Screw Electronic Timer (115V) Electronic Timer (230V) Motor – 1/4 H.P. 115/230V 60/50Hz 1 Phase 3/8-16 x 1.00" Long Hex Head Screw 3/8 I.D. Flat Washer Timing Belt Shim 1/2 - 13 x 2.50" long Hex Hd. Bolt 1/2 I.D. Lock Washer Clamp Screw 3/8" Lock Nut 1/2" Lock Nut 10 - 32 x .50" Long Flat Head Socket Cap Scr. 3/8 - 16 x .75" Long Flat Head Socket Cap Scr. 3/8 - 16 x .75” Long Hex Head Screw 3/8 - 16 x .62" long Hex Hd. Screw 5/16 - 24 x 1.25“ Long Socket Head Cap Scr. Adjustable Handles (pair) #10-24 x .25" Socket Hd. Set Screw 3/8 I.D. x 1.50" O.D. Fender Washer Timer Cord w/ Plug – 110v Timer Cord w/ Plug R-30027 R-30009 R-20039 R-30015 R-10034 R-10032 R-30007 R-30011 R-30006 R-30013 R-30023 R-30022 R-20019 R-20020 R-20033 R-10028 R-10029 106582 R-10042 R-10039 R-10035 R-10066-A R-10033 R-30018 ZA11167 R-10030 R-40011 R-10061 R-10062 R-10063 ZF10168 R-10065 ZF10174 R-10070 R-10048 R-40029 R-40037 P-1500-23 ZF10183 ZF10168 R-10058 R-10055 ZZ10068 ZZ10323 R-10079 ZF10221 ZF10222 ZF10231 ZF10241 ZF10240 114162 ZF10251 R-20082 ZA10148 ZF10271 R-10017 R-10017-220 REQ’D. 1 1 1 1 1 2 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 2 2 1 2 2 1 1 1 pk. 2 1 2 1 1 1 1 2 1 1 3 1 1 1 1 1 4 4 1 1 1 1 2 3 1 3 2 2 2 1 1 1 1 1 1 * Items not shown Customer Service 800.321.6188 www.wstyler.com 21 RO-TAP® RX-94 PARTS DIAGRAM • See Page 15 for Recommended Service Parts Kits 22 www.wstyler.com 57 RO-TAP® RX-94 PARTS ITEM NO. 1 2 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 * 42 43 44 45 46 47 48 48A 49 50 51 52 53 54 55 56 57 58 59 60 * 60A 66 77 78 PART NO. DESCRIPTION REQ’D. R-40023 ZA11167 R-10061 R-10062 R-20027 R-10055 R-10034 R-10042 ZF10174 R-10032 R-10065 ZF10168 ZF10221 R-40017 R-10028 R-20020 R-20019 ZF10221 R-40019 R-30006 R-40018 R-40021 R-10079 R-20033 ZF10241 ZF10231 R-20082 R-10066-A R-30010 R-30019 R-10038 114162 R-20029 R-20023 R-10063 R-10035 ZA10148 ZZ10068 ZZ10323 R-10017 P-1500-23 R-30018 R-10070 ZF10183 ZF10168 R-20039 R-10029 106582 ZF10222 R-10036 R-10030 ZF10251 R-30015 ZF10271 R-10039 R-10058 R-40011 R-40020 R-40030 R-40029 R-40037 R-10118 R-10099-30 114165 Painted Base Weldment Grommet Flanged Bearing Bearing Mainshaft Shim 1.42 O.D. x .0155 Thick Eccentric Disc Main Shaft Key 3/8-16 x 2.25" Carriage Bolt Block Steel Bushing .62 O.D. x .385 I.D. x 1.25" 3/8" Flatwasher 3/8-16 Locknut Lower Carrying Plate Tube Spacer Bearing Plate Back-Up Plate 3/8-16 Locknut Upper Carrying Plate Support Plate Dual Sieve Support Clamp Bar Tie Rod Clamp Screw Shield 3/8-16 x .75" long Flat Head Screw #10-32 x .50" long Flat Head Screw Adjustable Handles (pair) Cork Plug (10 cork plugs per pack) Rotating Guard Assembly Sheet Guard Upper Mainshaft Washer 3/8-16 x .62" long Hex Head Cap Screw 8" Hammer Hammer Block Flanged Bearing Hammer Pin #10-24 x .25" long Flat Point Socket Hd. Cap Screw 1/2-13 x 2.50" long Hex Head Bolt 1/2 I.D. Lockwasher Standard Motor Cord w/Plug (See page 21, for 2nd option) Motor-1/4 HP115/230V60/50Hz1 phase Motor Adapter Plate Sprocket – 14 Teeth (1800 rpm) with Set Screw 3/8-16 x 1.00" long Hex Head Screw 3/8 I.D. Flat Washer Cam Gear Cam Shoulder Screw 1/2 I.D. Shim 1/2-13 Locknut Lift Rod Lift Rod Coupling 5/16-24 x 1.25" long Socket Head Cap Screw Timing Belt Pulley 3/8 I.D. x 1.50" O.D. Fender Washer Main Shaft Key (Lower) Timing Belt Pedestal Cover Dual Sieve Cover Timer Enclosure Electronic Timer (115v) Electronic Timer (230v) 3 1/4" Octagon Box (Appleton # 30) Gas Spring (Guden #CGS24-30) Spring Stud (Guden #BS101-02) 1 4 1 1 1 1 2 2 3 1 1 1 1 1 2 1 1 2 1 2 1 2 2 2 4 6 1 1 pk. 1 1 1 2 1 1 2 1 1 1 1 1 1 1 1 4 4 1 1 2 1 2 1 1 1 1 1 1 1 1 1 1 2 1 1 2 * Items not shown Customer Service 800.321.6188 www.wstyler.com 23 RX-812 COARSE SIEVE SHAKER PARTS DIAGRAM 24 www.wstyler.com RX-812 COARSE SIEVE SHAKER PARTS ITEM NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 16 17 18 20 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37* 38 PART NO. DESCRIPTION LC10016 LC10017 LC10008 LC10015 P-1500-23 R-10112 102542 ZA10956 LC10014 LB10266 LC10007 LB10041 LC10005 R-30018 R-40040 R-40029 R-40037 ZZ10792 LC10003 ZF10183 LB10111 ZA10148 LB10051 LB10191 LC10006 ZF10168 ZF10221 LB10201 LB10211 ZZ10801 ZZ10301 ZF10184 LC10010 LC10011 LC10009 R-10018 LC10012 Locating Pin Clamping Knobs Clamp Bar Clamping Rods Motor – 1/4 HP, 115/230V, 60/50Hz, 1 phase Flexible Conduit Connector Oilite Flexible Conduit – 8-1/2" 10-24 Cup Point Set Screw Coupling Rolok 10-24 Self Tap Screw Shield Special Carriage Bolt Bearing Ring Adapter Timer Mounting Clip Electronic Timer 115v Electronic Timer 230v 1/4-28 x 1-3/4" Soc. Cap Scr. Base, Sieve Shaker 3/8"-16 x 1.00 Hex Hd. Bolt Drive Pulley – 1-1/2" O.D. 10-24 x 3/8" Cup Point Set Scr. Pulley/Eccentric Assembly Flanged Stand Off Bushing Carrying Plate 3/8" Hard Washer 3/8"-16 Lock Nut Stand Off Bushing Drive Belt – 2L310 1/4"-28 Black Lock Nut 1/4" Flat Washer 5/16"-18 Black Hex Hd. Bolt 12” Cover Clamping Plate 8" Cover Clamping Plate 12" to 8" Conversion Plate 110V Cord Set Arm REQ’D. 1 2 1 2 1 2 1 4 2 6 1 1 2 1 2 1 1 2 1 3 1 1 1 1 1 1 1 2 1 2 6 2 1 1 1 1 1 * Items not shown NOTES: _________________________________________________ ________________________________________________________ ________________________________________________________ ________________________________________________________ ________________________________________________________ ________________________________________________________ ________________________________________________________ ________________________________________________________ ________________________________________________________ ________________________________________________________ ________________________________________________________ ________________________________________________________ Customer Service 800.321.6188 www.wstyler.com 25 COMPUTERIZED PARTICLE ANALYZER (CPA) 2-1 • The HAVER TYLER CPA 2-1 is the newest member of the Photo-Optical Particle Size and Shape Analyzers. • The HAVER TYLER CPA 2-1 is equipped with user friendly CPA software that is compatible with current Windows™ based operating systems. • The unit can be operated with a desktop or laptop computer. Minimum software requirements are 850 MHZ, 1g hard drive and 512 RAM. The 2-1 software includes a feature that correlates CPA raw data to traditional test sieving results. • The new model has been designed for laboratory use measuring dry, free flowing, non-agglomerating particles. • The CPA unit is virtually maintenance free, durable, and can be used for “in-line” process applications as well. Technical Data: Measuring Range: Operating Voltage: Camera: Light Source: Dimensions: Weight: Applications: 26 www.wstyler.com .034 mm (ASTM 400) - 25 mm (ASTM 1” OPG) 230 v/50 Hz 120 v/60 Hz CCD - Line Camera LED 33” x 11” x 23” 36 lbs. Sand, coal, sugar, salt, plastics, fertilizer, ceramics, glass, foods, pharmaceuticals and other industrial materials Customer Service 800.321.6188 W.S. Tyler Certified, Certified Plus and Matched Test Sieves are examined to meet ASTM and ISO specifications. The openings of the sieves are measured with a computerized video imaging system. Products are then serialized and supplied with NIST traceable documents, including statistical information on opening sizes and wire diameters. Shown here is a typical Document of Certification and descriptions of the terms used. A Dimension Reference Number 1 = Wire Diameter “x” direction 2 = Aperture Size “x” direction 3 = Wire Diameter “y” direction 4 = Aperture Size “y” direction B Sample Size* = Number of apertures or wire diameters measured C Upper Spec. = Aperture size per ASTM E11 specification, plus tolerance D Lower Spec. = Aperture size per ASTM E11 specification, minus tolerance E Nominal = Specified aperture size, per ASTM E11 specification F Standard Deviation = A numerical value that measures “spreading” tendency, a deviation of the values from their mean (average) G Max. Measured = The largest aperture or wire diameter measured B C D E F G H I J M A L K H Min. Measured = The smallest aperture or wire diameter measured I Range = The difference between the “max” and “min” above (rounded) J Mean = Average aperture size or wire diameter measured K Description = Test sieve designation/ mesh size L Serial No. = Identification number of test sieves M Histogram = Graphic presentation of values measured vs. corresponding number of apertures examined Customer Service 800.321.6188 Laboratory Services Pages 12 and 13 www.wstyler.com 27 Canada Belgium Belarus W.S. TYLER CANADA LTD. HAVER BELGIUM S.A. OOO HAVER BY 225 Ontario Street Rue des Gaillettes 9 Ul. Zhukova, D.2 CA-ST. CATHARINES, Ontario L2R 7B6 B-4651 BATTICE BY-231295 LIDA, GRODNO Fax: +32-87-69 29 61 Tel./Fax +375 154 600 656 Fax: +1-905-688-4733 E-Mail: hbsa@cybernet.be Internet: www.haver.by E-Mail: sales@wstyler.ca Internet: www.haverbelgium.com +1-800-325-5993 Téléphone: +32-87-69 29 60 E-Mail: info@haver.by India Internet: www.wstyler.ca France HAVER STANDARD INDIA Pvt. Ltd. Brazil HAVER & BOECKER Standard House, 83, HAVER & BOECKER TELAS Ltda. Toiles Métalliques Maharshi Karve Marg, P.O.Box 2082, Rodovia Maria 7, Rue Sainte Catherine IN-MUMBAI - 400 002 Da Piedade Costa, 995 F-24100 BERGERAC Phone: 22-22060016 + 22060031 BRA-BARREIRO, Pedro Leopoldo / MG Téléphone: +33-5-53 24 93 13 Fax: 22-22086915 Teléfono: +55-316611371 Fax: +33-5-53 24 95 99 E-Mail: wiremesh@haverstandard.com Fax: +55-3136611370 E-Mail: haver.toiles@wanadoo.fr Internet: www.haverstandard.com E-Mail: telas@haverbrasil.com.br Internet: Internet: www.haverbrasil.com.br www.les-tissus-metalliques.com Great Britain Spain H&B Wire Fabrications Ltd. HAVER & BOECKER 30-32 Tatton Court Telas Metalicas Kingsland Grange, Woolston Avda. Les Bobiles, 7 GB-WARRINGTON, Cheshire WA1 4RR Casa 2 Phone: +44-1925-81 95 15 E-08850 GAVA (Barcelona) Fax: +44-1925-83 17 73 Teléfono: +34-93-6 62 63 55 E-Mail: sales@hbwf.co.uk Fax: +34-93-6 62 90 59 Internet: www.hbwf.co.uk E-Mail: haverboecker@telefonica.net Internet: www.telas-metalicas.com U.S.A. W.S. TYLER 8570 Tyler Boulevard, MENTOR Ohio 44060 Phone: +1-800-321-6188, +1-440-974-1047 Fax: +1-440-974-0921 E-Mail: wstyler@wstyler.com Internet: www.wstyler.com HAVER & BOECKER · Ennigerloher Straße 64 · 59302 OELDE · Germany Phone: +49-25 22-30 150 · Fax: +49-25 22-30 152 E-Mail: cpa@haverboecker.com Internet: www.haverparticleanalysis.com P 66 US-WST 112015 © HAVER & BOECKER. All rights on any kind of reproduction, in whole or part, reserved. Photos: Klaus Werner, Fototeam Walkenhorst Phone: +1-905-688-2644