Challenges and perspectives of the Aerospace Industry

Anuncio
The Ministry of Economy of the Government of Sonora, México, The University of Sonora (UNISON),
Maquilas Teta Kawi (an Offshore Group Company www.offshoregroup.com) and The National Center of
Metrology of México (CENAM) invite you to the:
F O R U M
“Challenges and perspectives of the Aerospace Industry”
Actions required in Standardization, Metrology, Accreditation and Certification
of the interest for the General Manufacturing Industry
Who should you attend?
Activities:
CEO´s, executives, managers, researchers and technical
personnel involved in the entire value chain of the
manufacturing industry.
Lectures given by experts in the field and related areas will
give way to discussions about needs, challenges and real
opportunities for organizations and interest groups that
want to increase their competitiveness and improve their
design, development, manufacturing and testing
processes.
Objectives:
Meet and discuss the major challenges in the Aerospace Industry and in the General
Manufacturing Industry in the Northwest of México for the next five years.
Identify the components of standardization, metrology, accreditation and certification required by
enterprises and organizations in order to address these challenges
Propose alternatives for action and support that can take the companies and organizations
Benefits:
Identification of specific cooperation projects and lines of action for the transfer of knowledge and
development of emerging technology
Strategies to enhance the growth of this industry in the fields of standardization, metrology,
accreditation, certification and technological development
Explore areas of opportunity to access to funding support for technology development projects
Venue:
Date
Place
Room
Co-organizers
September 22 - 23
México:
Guaymas,
Sonora
Parque Industrial Roca Fuerte,
Manufacturing Technology
Training Center
Ministry of Economy of
Sonora, UNISON,
Maquilas Teta Kawi,
CENAM
F R E E
O F
C H A R G E
PLEASE SHARE THIS INFORMATION WITH THE PEOPLE THAT YOU CONSIDER INTERESTED
P r o g r a m
D A Y
1
Timetable
14h00 – 15h00
Registration
15h00 – 15h15
Welcome
Luis Felipe Seldner,
CEO and President of The Offshore Group
15h15 – 15h30
Words of the authorities
Heriberto Grijalva
Rector
University of Sonora
Enrique Villa Rivera
General Director
National Council on Science and Technology
Héctor Nava Jaimes
General Director
National Center of Metrology - México
15h30 – 15h55
Inauguration and conference:
Current national situation and challenges in the State of
Sonora
Moisés Gómez Reyna
Secretary
Ministry of Economy of Sonora
http://www.1economiasonora.gob.mx
16h00 – 16h25
Science and Technology National Program
Enrique Villa Rivera
General Director
National Council on Science and Technology,
CONACYT
www.conacyt.gob.mx
16h30 – 16h55
National Flight Plan
Manuel Sandoval Ríos
Executive Director of Prospective Analysis and
Innovation
Business Intelligence Unit
PROMEXICO
www.promexico.gob.mx
16h55 – 17h10
Coffe break
17h10 – 17h35
Current National situation of the Aerospace Industry in
México
Flavio Díaz Mirón
President
Mexican Federation of Aerospace Industry,
FEMIA
www.femia.com.mx
17h35 – 18h00
Human Capital development in the Aerospace Industry
Miguel Álvarez Montalvo
President
Mexican Council of Aerospace Education,
COMEA
18h00 – 18h40
Improvement opportunities in Technological Development
and production management
Allen C. Haggerty
Closing
All
18h45 – 20h00
Topics
Participants
Vice President/General Manager Engineering
Military Aircraft and Missile Systems Group, The
Boeing Company (retired)
MIT Affiliate, Lean Advancement Initiative
www.mit.edu
D A Y
Timetable
08h30 - 09h00
09h00 – 09h15
09h15 -10h15
2
Topics
Registration
Introduction to the forum activities
09h15 - 09h35
1.1 Challenges, opportunities and perspectives in the industrial
sector
Block 1:
Challenges
and
perspectives in
México
northwest
region
09h35 – 09h55
1.2 Challenges, opportunities and perspectives in the industrial
sector
10h15 - 10h30
Coffe break
10h30 – 11h00
Specific approaches in technology:
2.1 Geometric and Dimensional Tolerances
11h00 – 11h30
2.2 Aerolabs for technical services and technology (LabTA) and
projects of the Seventh framework program
10h30 a 12h00
Block 2:
Technology
Offer
09h55 – 10h15
1.3 Challenges, opportunities and perspectives in the industrial
sector
11h30 – 12h00
2.3 Certification and accreditation
12h00-12h15
12h15 -13h45
Block 3:
Educational
offerings demands and
the
government
support
13h30 - 15h00
15h00 - 16h30
Block 4:
Conclusion
panel
Coffe break
12h15 – 12h35
3.1 Degree program in Metrology
Participants
J. Salvador Echeverría Villagómez
Physics Metrology Director
National Center of Metrology, CENAM
www.cenam.mx
Hiram Martínez
Plant Manager - Guaymas
Goodrich Turbomachinery Products
http://www.goodrich.com/Goodrich
Jaime Castro Batista
Plant Manager
Medtronic
www.medtronic.com.mx
Paul Cappelli
Director Global Development
Ducommun Inc.
Monrovia, California
http://www.ducommun.com/
René Pichardo Vega
CENAM
Guillermo Rodríguez Vilomara
National contact point for the Aerospace
Industry
Centro de Ingeniería y Desarrollo
Industrial www.cidesi.mx
Gustavo Hernández Curiel
Certificated Auditor
ACLASS http://www.aclasscorp.com/
Enrique F. Velázquez Contreras
General Academic Secretary - UNISON
12h35 – 13h00
3.2 Key elements for developing and presenting proposals to
CONACYT and the Ministry of Economy
Francisco Javier Cevallos Rojas
CONACYT Sonora
José Alfredo Gámez Corrales
Ministry of Economy - Sonora
13h00 – 13h25
3.3 Educational model in the Aeronautical University in Querétaro
and opportunity areas for link-up
Jorge Gutiérrez de Velasco
Rector
Aeronautical University in Querétaro
Lunch
15h00 – 15h15
4.1 Presentation of surveys analysis in the industry
16h30 - 16h45
16h45 – 17h00
15h15 – 16h30
4.2 Panel presentation and discussion of proposal and action plans
based on survey results
Coffe break
Comments and agreements
17h00 - 17h10
Closing
Martín Chávez Morales
Miguel Angel López Arriquivez
Engineering Industrial Departament
UNISON
UNISON – Ministry of Economy,
CONACYT- CENAM – MTK - Guests
All
Armando Lee Quiroga
General Director
Maquilas Teta Kawi
F u r t h e r
i n f o r m a t i o n
CENTROS DE ASISTENCIA METROLÓGICA – RED MESURA INTERINSTITUCIONAL
CENTRO NACIONAL DE METROLOGIA
Irma Rosa López Navarro
Universidad de Sonora (UNISON)
Hermosillo, Sonora. MÉXICO
http://www.industrial.uson.mx
Tel. +52 (662) 2592159, 2592160
ilopez@industrial.uson.mx
J. Gabriel Lugo Luévano
Centro Nacional de Metrología
Querétaro. MEXICO
http://www.cenam.mx
Tel. +52 (442) 211 0522
jlugo@cenam.mx
“Please confirm your participation”
Descargar