Brand Name Cialis Overnight » We Are The Best Pharmaceutical

W
W
W
.
B
HOW TO STORE YOUR
WOODEN PADDLES
If you haven't already invested in a paddle
rack, then now is the time to do it. Solid wood
paddles are susceptible to warpage, over time,
if stored improperly - especially if left
standing or leaning against any wall or
surface.
Even to lay a paddle flat can cause damage
when other items are invariably thrown on
top causing scratches, dents or even a bad
twist.
A
D
G
E
R
P
A
D
D
L
Oiling Wood Paddles,
Gunwales & More
The following information and more can also be found on
our website at www.badgerpaddles.com and on our blog
at http://badger-canoe-paddles.blogspot.com/search/label/
maintenance.
Clean paddle well (with fresh water) and dry
completely.
Gently sand roughened spots (if needed) with
fine sand paper - 220 then 320 grit - taking extra care
around the logo, etc.
Use your bare hand or a
lint-free cloth to rub oil all
over the surface of the
paddle. We usually
recommend our Badger®
Wood Oil, Tung Oil or
Boiled Linseed Oil.
The best way to store a paddle is to hang it
(vertically) in a paddle rack.
Leave to sit for 10 minutes or so and then return
to wipe off the excess oil with a lint-free cloth.
Next, leave until dry (may take up to 48 hours or
longer if the air is moist or humidity is high).
Paddle racks come in all shapes and sizes, and
are made from many different materials.
Badger® Paddles’ racks are made of wood.
Plus don't forget, all paddles should be stored
indoors, to protect them from the elements
and sun damage - as well as any temperature
fluctuations - in order to prolong the life of
the paddle.
Transportation
Woes:
Most damage to wooden
paddles and their finishes
actually occurs during
transport. Badger® Paddle
Socks are a stretchable onesize-fits-most bag that
protects your paddle from
unnecessary scrapes,
scratches and scars.
Compact and lightweight, our socks are
perfect for transport or storage. Quick to put
on and and take off, and able to fit multiple
paddle styles and sizes, our Paddle Socks are
an economical way to help prolong the life and
finish of your paddle(s). www.paddlesock.com
Repeat steps 2 to 5 until you achieve the desired
results. (usually 1 to 3 coats is satisfactory). Note:
You may “wet sand” the paddle using the oil for a
smoother finish or rub with superfine steel wool or
sandpaper between coats of oil.
Touch-up of worn spots
can be treated with oil
when they occur
(preferably).
If a too heavy coat of oil
has been left for too long or you get a gummy feel to the finish - get out your
fine (waterproof) sand paper again and "wet" sand
(with a bit more oil) then immediately wipe the
surface of any residual oil and leave to dry.
Note: if the oil has been applied too heavily, or
penetrates too deeply, you may have to check back
within in few hours as the excess oil may seep out
during this time. If this does occur, just wipe away
the extra with a clean rag and leave to dry (checking
back again as needed).
Amount of maintenance required depends on
amount of usage and means of storage. To preserve
the beauty and strength of your wooden paddle, we
recommend you oil your paddle(s) at the beginning
and end of the paddling season at minimum.
If the paddle sees heavy use, then oiling the wood
frequently is best. For best results, use Badger®
Wood Oil or the traditional boiled linseed oil, Tung
Oil Finish or your own mixture.
Badger® Paddles... for those who dig the water.
E
S
.
C
O
M
Note: “Oil” or “Oiling” can refer to a few
substances: Tung; Boiled Linseed; Badger®
Wood Oil (Hemp); a homemade mixture of oil
& spirits (which also helps the oil to permeate
the wood and speed up drying time); or a store
bought concoction (e.g. Tung Oil Finish)
Varnish Maintenance
To truly keep your paddle in it’s best condition, a
varnished paddle should be checked for any “scars”
from use at the end of every season. “Scars” include
nicks or heavy scratches or other abrasions in the
varnish finish. “Scars” can be caused by coming into
contact with rocks or other hard surfaces while in
use or at play. These “scars” should be sanded out
first (if possible) and the entire varnished surface be
given a light sanding with a fine sand paper. This
helps the new coat of marine-grade varnish that
now must be applied to have better surface
adhesion.
You may only want to "feather-out" the scar by
sanding lightly. Not only will this be easier but it
will allow a natural patina to acquire on your
paddle. These scars may even hold memories for
you. In the case of really deep scars, you may need
to fill with a coloured wood filler, sanding level
before finishing with a good quality marine grade
varnish. Before varnishing, wipe clean with a soft cloth or a
tack rag to remove any surface dust. If you are only
varnishing the blade of your paddle - use painters
tape to give a clean edge-line to your finish. Using a
brush made of natural fibre or sponge, brush on the
varnish according to the manufacturers directions.
Hang to dry in a dust free environment.
From Varnish to Oiled
If you are wanting to apply an oil finish to your
paddles or gunwales/gunnels that are varnished
then you MUST REMOVE THE VARNISH FINISH
FIRST or the oil will NOT penetrate the wood. This
can be done by hand sanding using coarse grit sand
paper or - even quicker with a machine or handheld power sander. Be
sure to wear a dust mask
to ensure you don't
breath in any of the
varnish dust.
When the wood is bare again - begin the oiling
process as described above making sure that the
first time you are oiling the wood that you use
multiple coats of oil. Once the finish has started to
build - maintenance will be more simple, needing
less oiling during the maintenance process then the
first time you apply the oil to just bare wood.
CONNECT WITH BADGER® ONLINE
sales@badgerpaddles.com