REFERENCIAS BIBLIOGRÁFICAS.

REFERENCIAS.
REFERENCIAS
BIBLIOGRÁFICAS.
(1)
ASPHALT INSTITUTE (1973). “Manual del Asfalto”. Traducido por Manuel
Velázquez. PROAS. Ediciones URMO. España.
(2)
ASPHALT INSTITUTE (1996). “Superpave Mix Design”. Superpave Serie No. 2 (SP2).
(3)
ASPHALT INSTITUTE (1997). “Performance Graded Asphalt Binder Specification and
Testing. Superpave Series No.1 (SP-1).
(4)
ASPHALT INSTITUTE (1997). “Mix Design Methods For Asphalt Concrete and Other
Hot-Mix Types”. The Asphalt Institute, Lexington, Kentucky.
(5)
BACKGROUND OF SUPERPAVE ASPHALT MIXTURE DESIGN AND
ANALYSIS. National Asphalt Training Center. Demostration Project 101. Publication
No. FHWA-SA-95-003.
(6)
BAHIA, H.U. y ANDERSON, D.A. (1995). “The New Proposed Rehological Properties
of Asphalt Binders: Why are they required and how do they compare to conventional
properties”.
(7)
BARKSDALE R. D. (1971) Compressive Stress Pulse Times in Flexible Pavements for
Use in Dinamic Testing, Highway Research Record 345, Highway Research Board 3244.
(8)
BATTIATO et al. (1977). “Moving Loads on a Viscoelastic Double Layer: Prediction of
Recoverable and Permanent Deformatinos”. Proceedings, Fourth International
Conference on the Structural Design of Asphalt Pavements. Vol. 1. Ann Arbor 459 -466.
(9)
BROC, V. (1984). “Áridos en Carreteras”. Carreteras. Revista Técnica de la Asociación
Española de la Carretera. 3ª. Época. No. 14. Madrid.
(10) BROWN S. F. and P. S. PELL (1974). “Repeated Loading of Bituminous Materials”.
CAPSA 74. National Institute for Road Research, Republic of South Africa, Durban.
(11) BROWN S. F. and C. A. BELL (1977). “The Validity of Design Procedures for the
Permanent Deformation of Asphalt Pavements”. Proceedings, Fourth International
Conference on the Structural Design of Asphalt Pavements. Vol. 1. Ann Arbor 467 -482.
Alejandro Padilla Rodríguez.
REFERENCIAS.
(12) BROWN S. F. and C. A. BELL (1979). “The Prediction of Permanent Deformation in
Asphalt Pavements”. Proceedings, The Association of Asphalt Paving Technologists.
Vol. 48.
(13) BROWN E. R. and CROSS S. (1989). “A Study of In–Place Rutting of Asphalt
Pavement”. Report No.89-2. National Center for Asphalt Technology, Alabama, U.S.A.
(14) BROWN E. R. (1990). “Density of Asphalt Concrete – How much is needed?. Report
No. 90-3, National Center for Asphalt Technology, Alabama, U.S.A.
(15) BROWN E. R. and CROSS S. (1992). “A National Study of Rutting in Hot Mix Asphalt
(HMA) Pavements”. Report No.92-5. National Center for Asphalt Technology, Alabama,
U.S.A.
(16) BROWN R., KANDHAL Y ZHANG (2001). ”Performance Testing for Hot Mix
Asphalt”. Executive Summary. November 2001. Auburn Universiy, Alabama, U.S.A.
(17) CATÁLOGO DE DETERIOROS DE PAVIMENTOS FLEXIBLES (2002). Consejo de
Directores de Carretereas de Iberia e Iberoamérica. Colección de Documentos. Volumen
No. 11. CEDEX.
(18) CELARD B. (1977). “ESSO Road Design Technology”. Proceedings, Fourth
International Conference on the Structural Design of Asphalt Pavements. Vol. 1. Ann
Arbor 249 -268.
(19) COOLEY A., KANDHAL P., BUCHANAN S., FEE F., and EPPS A. (2000). “Loaded
Wheel Testers in The United States: State of the Practice”. Transportation Research ECircular No. E-C016. NCAT Report No. 2000-4.
(20) COOPER K. E., S. F. BROWN and G. R. POOLEY (1985). “The Design of Aggregate
Gradings for Asphalt Basecourses”. Proceedings, The Association of Asphalt Paving
Technologists. Vol. 54.
(21) CORTÉ J. F. et al (1994). “Investigation of Rutting of Asphalt Surface Layers: Influence
of Binder an Axle Loading Configuration”. Transportation Research Record No. 1436.
(22) DAVIS, R. (1988). “Large Stone Mixes: An historical insight.” IS-103, National Asphalt
Paving Association.
(23) DAWSON A. (1997). “Rutting in unsurfaced Roads-Materials and Structure Interaction
Effects”. International Symposium on Thin Pavements, Surface Treatments, Unbound
Roads. June 1997. Department of Civil Engineering. University of Nottingham. United
Kingdom.
(24) DESCRIPTION OF DISTRESSES IN COMPOSITE PAVEMENTS. Appendix B.
Composite Pavements have rigid bases (concrete or brick) and asphaltic surfaces. State of
Ohio U.S.
Alejandro Padilla Rodríguez.
REFERENCIAS.
(25) ELLIOT R. P. et al. (1991). “Effect of Agregate Gradation Variation on Asphalt Concrete
Mix Properties”. Transportation Research Record No. 1317.
(26) FERNÁNDEZ DEL CAMPO J.A. (2001). “Manual de Control de Fabricación y Puesta
en Obra de Mezclas Bituminosas en Caliente”. M.F. España.
(27) FRANCKEN L. (1977). “Permanent Deformation Law of Bituminous Road Mixes in
Repeated Triaxial Compression” Proceedings, Fourth International Conference on the
Structural Design of Asphalt Pavements. Vol. 1. Ann Arbor 483 -493.
(28) GARNICA et al (2002). “Mecánica de Materiales para Pavimentos”. Publicación Técnica
No. 197. Sanfandila, Querétaro.
(29) GERALD A. HUBER. (1999). “Methods to Achive Rut-Resistant Durable Pavements”.
NCHRP. Transportation Research Board. National Academy Press, Synthesis 274,
Washington, D.C.
(30) HANSON D. I. et al. (1994). “Evaluation and Characterization of a Rubber – Modified
Hot Mix Asphalt Pavement”. Transportation Research Record No. 1436.
(31) HARDIN J. C. (1995). “Physical Properties of Asphalt cement Binders ASTM STP
1241”. American Society for Testing and Materials. Philadelphia, U.S.A.
(32) HARVEY J. and MONISMITH (1993). “Effect of Asphalt Concrete Specimen
Preparation Variables on Fatige and Permanent Deformation Test Results Using Strategic
Higway Research Program A-003A Proponed Testing Equipment”. Transportation
Research Record No. 1417.
(33) HOFSTRA, A., and A.J.G. KLOMP (1972). “Permanent Deformation of Flexible
Pavements Under Simulated Road Traffic Conditions”. Third International Conference
on the Structural Desing of Asphalt Pavements, Vol 1., London 613-621.
(34) HUANG YANG H. (1993). “Pavement Analysis and Design”. University of Kentucky.
Prentice Hall, inc. U.S.A.
(35) HUSCHEK S. (1977). “Evaluation of Rutting Due to Viscous Flow in asphalt
Pavements”. Proceedings, Fourth International Conference on the Structural Design of
Asphalt Pavements. Vol. 1. Ann Arbor 497 -508.
(36) KAMEL N. I. and MILLER L. J. (1994). “Comparative Performance of Pavement Mixes
Containing Conventional and Engineered Asphalts”. Transportation Research Record No.
1454.
(37) KANDHAL P. S., CROSS S. A. and BROWN E. R. (1990). “Evaluation of Bituminous
Pavements for High Pressure Truck Tires”. Nacional Center for Asphalt Technology.
Pennsylvania Department of Transportation and Federal Higway of Administration.
Report No. FHWA- PA-90-O08+87-01.
Alejandro Padilla Rodríguez.
REFERENCIAS.
(38) KANDHAL P. S., CROSS S. A. and BROWN E. R. (1993). “Heavy Duty Asphalt
Pavements in Peesylvania: an Evaluation for Rutting. NCAT Report No. 93-2.
(39) KANDHAL P. S. and MALLICK R. B. (2001). “Effect of Mix Gradation on Rutting
Potential of Dense – Graded Asphalt Mixtures”. Transportation Research Record No.
1767.
(40) KENNIS W. J. (1977). “Predictive Design Procedures – A Design Method for Flexible
Pavements Using the VESYS Structural Subsystem”. Proceedings, Fourth International
Conference on the Structural Design of Asphalt Pavements. Vol. 1. Ann Arbor 101 -130.
(41) KHEDR S. A. (1986). “Deformation Mechanism in Asphaltic Concrete”. Journal of
Transportation Engineering. American Society of Civil Engineers. Vol.112 No. 1.
(42) KIRWAN R. W. M.S. SNAITH and T.E. GLYNN (1977). “A Computer Based
Subsystem for the Prediction of Permanent Deformation”. Proceedings, Fourth
International Conference on the Structural Design of Asphalt Pavements. Vol. 2. Ann
Arbor 509 -518.
(43) KRAEMER C. et al. (2004). “Ingeniería de Carreteras” Vol. 1 y Vol. 2. McGraw Hill/
Interamericana de España S.A. España.
(44) KRUTZ N. C. and STROUP – GARDINER M. (1992). “Permanent Deformation
Characteristics of Recycled Tire Rubber-Modified and Unmodified Asphalt Concrete
Mixtures”. Transportation Research Record No. 1339.
(45) KRUTZ N. C. and SEBAALY (1993). “The Efects of Agregate Gradation on Permanent
Deformation of Asphalt Concrete”. Journal of the Association of Asphalt Paving
Technologists. Vol. 62.
(46) LAI J. S. and ANDERSON D. (1973). “Irrecoverable and Recoverable Nonlinear
Viscoelastic Properties of Asphalt Concrete. Transportation Research Record No. 468.
Transportation Research Borrad, 47-55.
(47) LARRY SANTUCCI (2001). “Rut Resistant Asphalt Pavements”. Technology Transfer
Program and Pavements Specialists. Pavement Research Center. U.C. Berkeley. Institute
of Transportation Studies. California, U.S.
(48) LEAHY R. B. (1989). “Permanent Deformation Characteristics of Asphalt Concrete”.
PhD. Dissertation, University of Maryland, College Park, M.D.
(49) LEKARP et al. (1997). “Influences on Permanent Deformation Behaviour of Unbound
Granular Materials”. Transportaron Research Record No. 1547.
(50) LINDEN F. and J. VAN DER HEIDE (1987). “Some Aspects of the Compaction of
Asphalt Mixes and its Influence on Mix Properties. Proceedings. The Association of
Asphalt Paving Technologist, Vol. 56.
Alejandro Padilla Rodríguez.
REFERENCIAS.
(51) LÓPEZ JIMENO, C. (1994). ”Manual de Áridos”. Prospección, explotación y
aplicaciones. Madrid. Ed. LOEMCO. E.T.S de Ingenieros de Minas de Madrid.
(52) MAHBOUB K, and D.N. L
LITTLE (1988). “Improved Asphalt Concrete Design
Procedure”. Research Report 474-1F, Texas Transportation Institute.
(53) MARTÍNEZ C. (2002). “Estudio de la Calidad de los Fílleres de Recuperación de las
Plantas Asfálticas. U.P.C. ETSECCPB. Barcelona, España.
(54) MASAD E., BUTTON J. W., PAPAGIANAKIST (2000). “Fine Agregate Angularity:
Automated Image Análisis Approach. TRR No. 1721.
(55) MCLEAN, D.B. and C.L. MONOSMITH (1974). Estimation of Permanent Deformation
in Asphalt Concrete Layers Due to Repeated Traffic Loading, Transportation Research
Record 510, Transportation Research Borrad 14-30.
(56) MEYER F. R. P. and HASS R. C. G. (1977). “A Working Design Subsystem for
Permanent Deformation in Asphalt Pavements”. Proceedings, Fourth International
Conference on the Structural Design of Asphalt Pavements. Vol. 1. Ann Arbor 519 -528.
(57) M.F. “Pliego de Prescripciones Técnicas Particulares” Normativa de Carreteras.
Ministerio de Fomento. España.
(58) MONISMITH C. L., K. INKABI, C. R. FREEME and D.B. MCLEAN (1977). “A
Subsystem to Predict Rutting in Asphalt Concrete Pavements Structures”. Proceedings,
Fourth International Conference on the Structural Design of Asphalt Pavements. Vol. 1.
Ann Arbor 529 -539.
(59) MONISMITH C. L., J. EPPS, and F. N. FINN. (1985). Improved Asphalt Mix Design,
Proceedings, The Association of Asphalt Paving Technologists, Williamsburg, Virginia,
Vol. 54.
(60) MONISMITH C. L. and A. A. TAYEBALI (1988). Permanent Deformation (Rutting)
Considerations in Asphalt Concrete Pavements Sections. Proceedings, The Association of
Asphalt Paving Technologists, Williamsburg, Virginia, Vol. 57.
(61) MONISMITH C. L., et al.(1994). “Permanent Deformation Response of Asphalt –
Aggregate Mixes”. SHRP-A-415. National Research Council. Washington, D.C. U.S.A.
(62) PÉREZ B. (2003). ”Influencia del Asfalto en la Resistencia a las Deformaciones Plásticas
de las Mezclas Asfálticas. Revista Carreteras Nov./Dic. 2003. No. 130.
(63) PÉREZ JIMÉNEZ F. E., MIRÓ RECASENS et al. (2003). “ I Curso Internacional
Intensivo de Pavimentos Asfálticos”. ETSECCPB. Universidad Politécnica de Catalunya,
AEC, Barcelona España.
(64) REBALA S. R. and ESTAKHRI C. K. (1995). “Laboratory Evaluation of Crumb Rubber
Modified Mixtures Designed Using TxDOT Mixture Design Method”. Transportation
Research Record No. 1515.
Alejandro Padilla Rodríguez.
REFERENCIAS.
(65) RODRÍGUEZ T. et al. (2001).”Desarrollo de Aditivos para Asfaltos Modificados con
Bajos Contenidos de Hule”. Publicación Técnica No. 160. Instituto Mexicano del
Transporte. Sanfandila Querétaro.
(66) RUIZ R. “La Calidad y la Seguridad en las Infraestructuras”. Artículo. Control de
Mezclas Bituminosas en el Borrador de la Normativa CEN. Revista: Ingeniería Civil No.
124/2001. España.
(67) RUIZ R. y PÉREZ B. (2002). “Influencia de los Betunes en las Deformaciones Plásticas
de las Mezclas Bituminosas”. M-72. Monografías CEDEX. Ministerio de Fomento.
Centro de Estudios de Carreteras. España.
(68) SCT. “Normativa para la Infraestructura del Transporte”. Secretaría de Comunicaciones y
Transportes. México.
(69) SMITH M. R. and L. COLLIS. (1994) “Áridos” Áridos Naturales y de Machaqueo para
la Construcción”. 2ª.Edición. The Geological Society. Edición especial No. 9 sobre
Ingeniería Geológica. Colegio Oficial de Geólogos de España. Versión en Español
Editada por: L. Suárez y M. Regueiro.
(70) SORIANO, J. (1992). “Áridos para Carreteras”. INGEOPRES, No. 6. Madrid, España.
(71) SOUSA, J. B., CRAUS J. and MONISMITH C. L. (1991). ”Sumary Report on
Permanent Deformation in Asphalt Concrete”. Strategic Highway Research Program.
National Research Council. Washington, D.C. Institute of Transportation Studies.
University of California. Berkeley, California.
(72) STUART K. D. (1993). “Asphalt Mixtures Containing Chemically Modified Binders”.
Transportation Research Record. No. 1417.
(73) TENG PAUL (2003). “Distress Identification Manual for the Long-Term Pavement
Performance Program”. U.S. Department of Transportation. Federal Highway
Administration. Publication No. FHWA-RD-03-031.
(74) TROWER E. N. (1977). “Methods of Predicting Deformation in Road Pavements”.
Proceedings, Fourth International Conference on the Structural Design of Asphalt
Pavements. Vol. 1. Ann Arbor 540 -554.
(75) TSENG K. H. and LYTTON R. L. (1990). “Fatigue Damage Properties of Asphaltic
Concrete Pavements”. Transportation Research Record No. 1286.
(76) UGE P. and P.J. VAN DE LOO. (1974). “Permanent Deformation of Asphalt Mixes”.
Koninklijke/Shell-Laboratorium, Ámsterdam, November 1974.
(77) UZAN J. (1982). “Permanent Deformation in Pavement Design and Evaluation”.
Technion. Israel Institute of Technology.
Alejandro Padilla Rodríguez.
REFERENCIAS.
(78) UZAN J., and R. L. LYTTON (1982). “Structural Design of Flexible Pavements: A
Simple Predictive System”. Transportation Research Record 888. Transportation
Research Borrad 56-62.
(79) UZAN J. (2003). “Characterization of Asphalt Concrete Materials for Permanent
Deformation”. Internacional Journal of Pavement Engineering. Vol. 4. No. 2.
(80) UZAN J. (2004). “Permanent Deformation in Flexible Pavements”. Journal of
Transportation Engineering. Vol. 130. No. 1.
(81) VÁSQUEZ R. MARCOS V. (2001). Diseño de mezclas asfálticas en Caliente. Nuevas
Tendencias. Ministerio de Obras Públicas de el Salvador.
(82) VAN DE LOO P. J. (1976). “Practical Approach to the Prediction of Rutting in Asphalt
Pavements: The Shell Method”. Transportation Research Record No. 616. Transportation
Research Borrad 15-21.
(83) VERSTRAETEN J., J. E. ROMAIN and V. VEVERKA (1977). “The Belgian Road
Research Center´s Overall Approach to Asphalt Pavement Structural Design”.
Proceedings, Fourth International Conference on the Structural Design of Asphalt
Pavements. Vol. 1. Ann Arbor 298-324.
(84) ZAMAN, MUSHARRAF, et al. (1993). “Resilient Modulus of Granular Materials”.
Journal of Transportation Engineering. Vol. 120, No. 6.
Alejandro Padilla Rodríguez.
REFERENCIAS.
PÁGINAS WEB
CONSULTADAS.
(1)
http://www.sct.gob.mx
(2)
http://www.imt.mx
(3)
http://www.mfom.es/
(4)
http://www.cedex.es
(5)
http://gulliver.trb.org/
(6)
http://www.hotmix.org/
(7)
http://www.asphaltisbest.com
(8)
http://www.asphaltinstitute.org
(9)
http://www.asphaltalliance.com
(10) http://www.e-asfalto.com
(11) http://www.tfhrc.gov
(12) http://www.dot.state.oh.us/pavement/
Alejandro Padilla Rodríguez.