1. Diámetro interior liso y constante para permitir un flujo sin

VEMACERO, C.A. TELF (251) 269-2898 / 2487
ventas@vemacero.com
1. Diámetro interior liso y constante para permitir un flujo sin restricciones.
2. Extremos de corte cuadrado
3. Bisel, maquinado con precisión para una buena unión soldada.
4. .Identificación clara del diámetro, schedule o espesor de pared y material o código de colada.
5. Espesor uniforme para máxima resistencia.
1 de 17
VEMACERO, C.A. TELF (251) 269-2898 / 2487
ventas@vemacero.com
Conexiones de Acero al Carbono
Soldables Según ASTM A234
90˚ Codos
Radio Largo
Tee reductoras y reducciones,
Concentricas y Excentricas
90˚ Reducing Elbows
Long Radius
Caps
90˚ Elbows
Long Radius, Long Tangent
Lap Joint
Stub Ends ...................................
90˚ codos
Radio corto
Saddles
Laterals
45˚ codo
Radio largo
Seamless and Welded Pipe,
Dimensions
Dimensional Tolerances
of Fittings
180˚ Returns
Long Radius
Short Radius
Material and
Manufacturing Standards
Butt Welding Ends,
Design and Dimensions
Straight Tees
and Crosses
2 de 17
VEMACERO, C.A. TELF (251) 269-2898 / 2487
ventas@vemacero.com
ASTM STANDARDS
CCTF carbon steel welding fittings are manufactured from seamless steel tubing and furnished in accordance with ASTM Standard A-234,
with material specifications in accordance with ASTM A-106, Grade B, for fittings made from pipe; ASTM A-515, Grade 65 or 70, for fittings
made from plate.
CCTF alloy steel welding fittings are furnished in accordance with ASTM standard A-234, with materials specification including A-335, Grade
P1, carbon-molybdenum, and Grade P12, P11, P22, P5, P7; P9 chrome molybdenum, for fittings made from pipe.
ASTM A-204 Grade B, carbon molybdenum, and ASTM A-387 Grades 12, 11, 22, 5, 7, 9 chrome molybdenum for fittings made from plate.
CCTF welding fittings are also available in accordance with ASTM specification A-420 covering low-temperature service, down to -150˚F
(-101˚C).
CCTF stainless steel welding fittings are manufactured and available in the following types: 304, 304L, 316, 316L and 347. They are
furnished in accordance with ASTM Standard A-403, with material specifications to ASTM A-312 covering fittings made from pipe, and A-240
for fittings made from plate. Refer to CCTF catalogue “Stainless Steel Welding Fittings.
ANSI, MSS, ASME and CSA Standards
ASME/ANSI and MSS standards govern fitting dimensions and tolerances, ASME/ANSI B16.9 “Wrought Steel Buttwelding Fittings”, si the
basic standard. It covers steel butt-welding fittings sizes NPS 1/2 through NPS 48 (DN 15 through DN 1200).
Other ASME/ANSI and MSS standards, written to supplement B16.9, are as follows:
ASME/ANSI B16.25:
Butt-welding Ends
ASME/ANSI B16.28:
Butt-welding short radius elbows and returns
MSS SP-43:
Light-wall stainless steel fittings, NPS 3/4 through NPS 24 (DN 20 through DN 600)
MSS SP-75:
High Test Wrought Welding Fittings
The following codes and
ASME/ANSI B31.1:
ASME/ANSI B31.3:
ASME/ANSI B31.4:
ASME/ANSI B31.5:
ASME/ANSI B31.8:
ANSI/ASME B36.10M:
ANSI/ASME B36.19M:
CSA Z183:
CSA Z184:
CAN3-Z245.11-M91:
ASME:
standards influence the manufacture of welding fittings, where applicable.
Power piping
Petroleum refinery piping
Liquid petroleum transportation piping system
Refrigeration piping
Gas transmission and distribution piping systems
Welded and seamless wrought steel pipe
Stainless steel pipe
Oil pipe line transportation systems
Gas pipe line systems
Requirements for wrought steel butt welding fittings
Boiler and pressure vessel code
SPECIAL METALS
High Test Steel. High test pipe line welding fittings, conforming to CSA Standard CAN3-Z245.11 or MSS SP-75, are available with physical
properties to match pipe with *42,000, 46,000, 52,000, 60,000, 65,000, and over p.s.i. minimum yield strengths.
Other Ferrous Alloys. Fittings are available manufactured from ASTM alloy specifications other than those listed in the “ASTM Standards”
above.
Non-Ferrous Metals. Fittings of relatively common metals, such as aluminum, nickel, copper, etc., can be readily furnished; production is
limited only be availability of raw materials. The same is true of less common metals, such as the various grades of Hastelloy, Inconel,
Incoloy, Monel, Alloy-20, rare types of stainless steel and other unusual analyses.
*Equals 290, 317, 359, 414, 448 Mpa, respectively.
METRIC EQUIVALENTS
The International System (SI) metric equivalent of British units are shown throughout this catalogue.
NPS (Nominal Pipe Size) = DN, ▲ (Nominal Diameter)
Operating Pressure Class = PN, ▲ (Pressure Number)
1 inch
= 25.4 millimetres
1 pound, weight
= 0.4536 kilograms
1 psi
= 0.06895 bars
1 psi, stress
= 0.006895 megapascals (MPa)
▲ From the SI designations, Diamètre Nominal and Pression Nominale.
3 de 17
VEMACERO, C.A. TELF (251) 269-2898 / 2487
ventas@vemacero.com
90˚ ELBOW
LONG RADIUS
Standard, Extra Strong,
Schedule 160, Double Extra Strong
Carbon and ferritic alloy steel,
ASTM A-234
ASME/ANSI B16.9
STANDARD WEIGHT
NPS
DN
1/2
15
3/4
20
1
25
1 1/4
32
1 1/2
40
2
50
2 1/2
65
3
80
(2)
3 1/2
90
4
100
5
125
6
150
8
200
10
250
12
300
14
350
16
400
18
450
20
500
22
550
24
600
26
650
30
750
36
900
42▲
1100
Outside
Diameter
at Bevel
O.D.
.840
21
1.050
27
1.315
33
1.660
42
1.900
48
2.375
60
2.875
73
3.500
89
4.000
102
4.500
114
5.563
141
6.625
168
8.625
219
10.750
273
12.750
324
14.000
356
16.000
406
18.000
457
20.000
508
22.000
559
24.000
616
26.000
660
30.000
762
36.000
914
42.000
1067
Centre
Wall
to
Inside
End Diameter Thickness Approx.
I.D.
T
Weight
A
1.50
.622
0.109
0.2
38
15.80
2.77
0.09
(1)
1.12
.824
0.113
0.3
29
20.93
2.87
0.14
1.50
1.049
0.133
0.4
.38
26.64
3.38
0.18
1.88
1.380
0.140
0.5
48
35.05
3.56
0.23
2.25
1.610
0.145
0.75
57
40.89
3.68
0.34
3.0
2.067
0.154
1.5
76
52.50
3.91
0.68
3.75
2.469
0.203
3.0
95
62.71
5.16
1.35
4.50
3.068
0.216
4.5
114
77.93
5.49
2.03
5.25
3.548
0.226
6.2
133
90.12
5.74
2.8
6.00
4.026
0.237
8.5
152
102.26
6.02
3.8
7.50
5.047
0.258
14.2
190
128.19
6.55
6.4
9.00
6.065
0.280
23
229
154.05
7.11
10.4
12.00
7.981
0.322
45
305
202.72
8.18
20
15.00
10.02
0.365
78
381
254.5
9.27
35
18.00
12.00
0.375
118
457
304.8
9.53
53
21.0
13.25
0.375
147
533
336.6
9.53
66
24.0
15.25
0.375
202
610
386.1
9.53
91
27.0
17.25
0.375
256
686
438.2
9.53
115
30.0
19.25
0.375
310
62
489.0
9.53
139
33.0
21.25
0.375
394
838
539.8
9.53
177
36.0
23.25
0.375
446
914
590.6
9.53
201
39.0
25.25
0.375
550
991
641.4
9.53
247
45.0
29.25
0.375
736
1143
743.0
9.53
331
54.0
35.25
0.375
1062
1372
895.4
9.53
478
63.0
41.25
0.375
1370
1600
1047.8
9.53
616
EXTRA STRONG
SCHEDULE 160
DOUBLE EXTRA STRONG
Inside
Wall
Diameter Thickness Approx.
I.D.
T
Weight
.546
.147
0.2
13.87
3.73
.09
.742
.154
0.2
18.85
3.91
.09
.957
.179
0.5
24.31
4.55
0.23
1.278
.191
0.7
32.46
4.85
0.32
1.500
.200
1.0
38.10
5.08
0.45
1.939
.218
2.0
49.25
5.54
0.9
2.323
.276
4.0
59.00
7.01
1.8
2.900
.300
6.0
73.66
7.62
2.7
3.364
.318
8.5
85.45
8.08
3.83
3.826
.337
12
97.18
8.56
5.4
4.813
.375
20
122.25
9.53
9.0
5.761
.432
32
146.33
10.97
14
7.625
.500
68
193.68
12.70
31
9.750
.500
112
247.65
12.70
50
11.750
.500
150
298.45
12.70
68
13.00
.500
192
330.2
12.70
86
15.00
.500
258
381.0
12.70
116
17.00
.500
326
431.8
12.70
147
19.00
.500
420
482.6
12.70
189
21.00
.500
520
533.4
12.70
234
23.00
.500
606
584.2
12.70
273
25.00
.500
729
635.0
12.70
328
29.00
.500
953
736.6
12.70
429
35.00
.500
1412
889.0
12.70
635
41.00
.500
1890
1041.1
12.70
820
Inside
Wall
Diameter Thickness Approx.
I.D.
T
Weight
0.815
.250
0.6
20.7
6.35
0.27
1.160
.250
1.0
29.5
6.35
0.45
1.338
.281
1.8
34.0
7.14
0.81
1.687
.344
3.2
42.9
8.74
1.44
2.125
.375
6.0
54.0
9.53
2.70
2.624
.438
9.0
66.7
11.13
4.05
3.438
.531
19
87.3
13.49
8.5
4.313
.625
33
109.6
15.88
15
5.187
.719
59
131.8
18.26
27
6.813
.906
127
173.05
23.01
57
8.500
1.125
270
215.90
28.58
122
10.126
1.312
460
257.20
33.53
207
11.188
1.406
563
284.18
35.71
253
12.812
1.594
825
325.42
40.49
371
Inside
Wall
Diameter Thickness Approx.
I.D.
T
Weight
.599
.358
0.8
15.21
9.09
0.36
.896
.382
1.4
22.76
9.70
0.63
1.100
.400
2.0
27.94
10.16
0.90
1.503
.436
3.8
38.18
11.07
1.71
1.771
.552
7.1
44.98
14.02
3.20
2.300
.600
11.2
58.42
15.24
5.04
(2)
(2)
2.728
.636
16.2
69.29
16.15
7.3
3.152
.674
21.2
80.06
17.12
9.5
4.063
.750
38
103.20
19.05
17
4.897
.864
63
124.38
21.95
28
6.875
.875
120
174.63
22.23
54
4 de 17
(1) May be furnished as 1.5 in (38mm) at the
manufacturer’s option.
(2) 3-1/2XXS is not specified in ASME/ANSI B36.10M.
▲) Produced from X-rayed, stress-relieved welded pipe.
(▲
Welds are 100% radiographed in accordance with the
requirements of ASME Boiler & Pressure Vessel
Code.
These fittings are also available in other sizes and/or wall
thicknesses.
INCHES
POUNDS
MILLIMETRES
KILOGRAMS
VEMACERO, C.A. TELF (251) 269-2898 / 2487
ventas@vemacero.com
90˚ ELBOWS
SHORT RADIUS
Standard Weight, Extra Strong,
and Double Extra Strong
Carbon and ferritic alloy steel,
ASME/ANSI B16.28,
ASTM A-234
STANDARD WEIGHT
NPS
DN
1
25
1 1/4
32
1 1/2
40
2
50
2 1/2
65
3
80
3 1/2
90
4
100
5
125
6
150
8
200
10
250
12
300
14
350
16
400
18
450
20
500
24
600
(2)
30
(2)
36
(2)
750
(2)
900
Outside
Diameter
at Bevel
O.D.
1.315
33
1.660
42
1.900
48
2.375
60
2.875
73
3.500
89
4.000
102
4.500
114
5.563
141
6.625
168
8.625
219
10.750
273
12.750
324
14.000
356
16.000
406
18.000
457
20.000
508
24.000
610
30.000
762
36.000
914
Centre
to End
Nominal
A
1.0
25
1.25
32
1.5
38
2.0
51
2.5
64
3.0
76
3.5
89
4.0
102
5.0
127
6.0
152
8.0
203
10.0
254
12.0
305
14.0
356
16.0
406
18.0
457
20.0
508
24.0
610
30.0
762
36.0
914
Inside
Diameter
I.D.
1.049
26.64
1.380
35.05
1.610
40.89
2.067
52.50
2.469
62.71
3.068
77.93
3.548
90.12
4.026
102.26
5.047
128.19
6.065
154.05
7.981
202.72
10.02
254.5
12.00
304.8
13.25
336.6
15.25
387.4
17.25
438.2
19.25
489.0
23.25
590.6
29.25
743.0
35.25
895.4
Wall
Thickness
T
.133
3.38
.140
3.56
.145
3.68
.154
3.91
.203
5.16
.216
5.49
.226
5.74
.237
6.02
.258
6.55
.280
7.11
.322
8.18
.365
9.27
.375
9.53
.375
9.53
.375
9.53
.375
9.53
.375
9.53
.375
9.53
.375
9.53
.375
9.53
Approx.
Weight
.25
.11
.38
.17
.50
.23
.88
.40
1.75
.79
3.00
1.35
4.00
1.80
6.00
2.70
9.5
4.28
15.5
7
31
14
55
25
78
35
104
47
118
53
148
67
210
95
288
130
480
216
695
313
(1) NPS 3-1/2 (DN 90) XXS is not specified in ASME/ANSI B36.10.
(2) These sizes not covered in ASME/ANSI B16.28.
These fittings are also available in other sizes and/or wall thicknesses.
INCHES
POUNDS
MILLIMETRES
KILOGRAMS
5 de 17
EXTRA STRONG
Inside
Diameter
I.D.
1.500
38.10
1.939
49.25
2.323
59.00
2.900
73.66
3.364
85.45
3.826
97.18
4.813
122.25
5.761
146.33
7.625
193.68
9.750
147.65
11.750
298.45
13.00
330.02
15.00
381.0
17.00
431.8
19.00
482.6
23.00
584.2
29.00
736.6
35.00
889.0
Wall
Thickness
T
.200
5.08
.218
5.54
.276
7.01
.300
7.62
.318
8.08
.337
8.56
.375
9.53
.432
10.97
.500
12.70
.500
12.70
.500
12.70
.500
12.70
.500
12.70
.500
12.70
.500
12.70
.500
12.70
.500
12.70
.500
12.70
Approx.
Weight
.75
.34
1.50
.68
2.25
1.01
3.75
1.69
5.50
2.48
7.75
3.5
13.5
6.1
22.5
10.1
46
21
71
32
100
45
132
59
160
72
160
87
280
126
370
167
634
285
940
423
DOUBLE EXTRA STRONG
Inside
Diameter
I.D.
1.100
27.94
1.503
38.13
1.771
44.98
2.300
58.42
(1)
2.728
69.29
3.152
80.06
4.063
103.20
4.897
124.38
6.875
174.63
Wall
Thickness
T
.400
10.16
.436
11.07
.552
14.02
.600
15.24
(1)
.636
16.15
.674
17.12
.750
19.05
.864
21.95
.875
22.23
Approx.
Weight
1.5
.68
2.8
1.26
4.9
2.21
7.0
3.15
10.5
4.73
14.1
6.35
26
12
43
19.4
80
36
VEMACERO, C.A. TELF (251) 269-2898 / 2487
ventas@vemacero.com
45˚ ELBOWS
LONG RADIUS
Standard Weight,
Extra Strong, Schedule 160,
Double Extra Strong
Carbon and ferritic alloy steel,
ASTM A-234, ASME/ANSI B16.9
STANDARD WEIGHT
NPS
DN
1/2
15
3/4
20
1
25
1 1/4
32
1 1/2
40
2
50
2 1/2
65
3
80
3 1/2
90
4
100
5
125
6
150
8
200
10
250
12
300
14
350
16
400
18
450
20
500
22
550
24
600
26
650
30
750
36
900
42▲
1100
Outside Centre to
Diameter
End
at Bevel Nominal
O.D.
A
.840
.62
21
16
1.050
.44
27
11
1.315
.88
33
22
1.660
1.00
42
25
1.900
1.12
48
29
2.375
1.38
60
35
2.875
1.75
73
44
3.500
2.00
89
51
4.000
2.25
102
57
4.500
2.50
114
64
5.563
3.12
141
79
6.625
3.75
168
95
8.625
5.00
219
127
10.750
6.25
273
150
12.750
7.50
324
190
14.000
8.75
356
222
16.000 10.00
406
254
18.000 11.25
457
286
20.000 12.50
508
318
22.000 13.50
559
343
24.000 15.00
610
381
26.000 16.00
660
406
30.000 18.50
762
470
36.000 22.25
914
565
42.000 26.00
1067
860
EXTRA STRONG
Wall
Inside
Wall
Inside
Diameter Thickness Approx. Diameter Thickness Approx.
Weight
Weight
T
I.D.
T
I.D.
.622
.109
.08
15.80
2.77
.04
.824
.113
.08
.742
.154
.16
20.93
2.87
.04
18.85
3.91
.07
1.049
.133
.25
.957
.179
.28
26.24
3.38
.11
24.31
4.55
.13
1.380
.140
.33
1.278
.191
.44
35.05
3.56
.15
32.46
4.85
.20
1.610
.145
.47
1.500
.200
.60
40.89
3.68
.21
38.10
5.08
.27
2.067
.154
.78
1.939
.218
1.05
52.50
3.91
.35
49.25
5.54
.47
2.469
.203
1.66
2.323
.276
1.91
62.71
5.16
.75
59.00
7.01
.86
3.068
.216
2.25
2.900
.300
3.08
77.93
5.49
1.01
73.66
7.62
1.39
3.548
.226
3.16
3.364
.318
4.75
90.12
5.74
1.42
85.45
8.08
2.14
4.026
.237
4.25
3.826
.337
5.88
102.26
6.02
1.91
97.18
8.56
2.65
5.047
.258
7.25
4.813
.375
10.0
128.19
6.55
3.26
122.25
9.53
4.65
6.065
.280
11.5
5.761
.432
16.7
154.05
7.11
5.18
146.33 10.97
7.5
7.981
.322
22.5
7.625
.500
34
202.72
8.18
10
193.68 12.70
15
10.02
.365
39
9.750
.500
53
254.5
9.27
18
247.65 12.70
24
12.00
.375
59
11.750
.500
74
304.8
9.53
27
298.45 12.70
33
13.25
.375
74
13.00
.500
95
336.6
9.53
33
330.2
12.70
43
15.25
.375
101
15.00
.500
131
387.4
9.53
46
381.0
12.70
59
17.25
.375
128
17.00
.500
170
438.2
9.53
5
431.8
12.70
77
19.25
.375
155
19.00
.500
205
489.0
9.53
70
482.6
12.70
92
21.25
.375
197
21.00
.500
260
539.8
9.53
89
533.4
12.70
117
23.25
.375
223
23.00
.500
295
590.6
9.53
100
584.2
12.70
133
25.25
.375
275
25.00
.500
365
641.4
9.53
124
635.0
12.70
164
29.25
.375
367
29.00
.500
475
743.0
9.53
165
736.6
12.70
214
35.25
.375
531
35.00
.500
706
895.4
9.53
239
889.0
12.70
318
41.25
.375
710
41.00
.500
950
1047.8
9.53
320
1041.4 12.70
428
SCHEDULE 160
DOUBLE EXTRA
STRONG
Inside
Wall
Inside
Wall
Diameter Thickness Approx. Diameter Thickness Approx.
Weight
Weight
I.D.
T
I.D.
T
.434
.308
0.17
11.02
7.82
.08
.815
.250
.38
.599
.358
.40
20.70
6.35
.17
15.21
9.09
.18
1.160
.250
.50
.896
.382
.55
29.46
6.35
.23
22.76
9.70
.25
1.338
.281
1.00
1.100
.400
1.15
34.0
7.14
.45
27.94
10.16
.52
1.687
.344
1.75
1.503
.436
2.13
42.85
8.74
.79
38.18
11.07
.96
2.125
.375
3.00
1.771
.552
3.75
53.98
9.53
1.35
44.98
14.02
1.7
2.624
.438
4.5
2.300
.600
5.75
66.65
11.13
2.0
58.42
15.24
2.6
*2.728 *.636
8.65
69.29
16.15
3.9
3.428
.531
9.5
3.152
.674
10.7
87.33
13.49
4.3
80.06
17.12
4.8
4.313
.625
4.3
4.063
.750
19
109.55 15.88
7.65
103.20 19.05
8.6
5.187
.719
30
4.897
.864
32
131.8
18.26
13.5
124.38 21.95
14.4
6.813
.906
64
6.875
.875
60
173.05 23.01
29
174.63 22.23
27
8.500
1.125
135
215.9
28.58
61
10.126 1.312
230
257.2
33.32
104
11.188 1.406
278
284.2
35.71
125
12.812 1.594
415
325.4
40.49
187
-
• NPS 3-1/2 (DN 90) XXS is not specified in ASME/ANSI B36.10M.
▲
Produced from x-rayed, stress relieved welded pipe. Welds are 100% radiographed in
accordance with the requirements of ASME Boiler & Pressure Vessel Code.
These fittings are also available in other sizes and/or wall thicknesses.
6 de 17
INCHES
POUNDS
MILLIMETRES
KILOGRAMS
VEMACERO, C.A. TELF (251) 269-2898 / 2487
ventas@vemacero.com
180˚ RETURNS
LONG RADIUS
SHORT RADIUS
Standard Weight & Extra Strong
Carbon and ferritic alloy steel, ASTM A-234,
ASME/ANSI B16.9
ASME/ANSI B16.28
LONG RADIUS
NPS
1/2
3/4
1
1 1/4
1 1/2
2
2 1/2
3
3 1/2
4
5
6
8
10
12
14
16
18
20
22
24
(3)
26
(3)
30
Outside
Diameter
DN
O.D.
.840
15
21
1.050
20
27
1.315
25
33
1.660
32
42
1.900
40
48
2.375
50
60
2.875
65
73
3.500
80
89
4.000
90
102
4.500
100
114
5.563
125
141
6.625
150
168
8.625
200
219
10.750
250
273
12.750
300
324
14.000
350
356
16.000
400
406
18.000
450
457
20.000
500
508
22.000
550
559
24.000
600
610
26.000
(3)
650
660
30.000
(3)
750
762
Center to
Center
Nominal
H
.300
76
2.25
57
3.00
76
3.75
95
4.50
114
6.00
152
7.50
191
9.00
229
10.50
267
12.0
305
15.0
381
18.0
457
24.0
610
30.0
762
36.0
914
42.0
1067
48.0
1219
54.0
1372
60.0
1524
66.0
1676
72.0
1829
78.0
1981
90.0
2286
Back to
Face
Nominal
J
1.88
48
1.69
43
2.19
56
2.75
70
3.25
83
4.19
106
5.19
132
6.25
159
7.25
184
8.25
210
10.31
262
12.31
313
16.31
414
20.38
518
24.38
619
28.0
711
32.0
813
36.0
914
40.0
1018
44.0
1118
48.0
1219
52.0
1321
60.0
1524
SHORT RADIUS
Center to
Center
Nominal
K
(1)
(1)
(1)
(1)
2.0
51
2.5
64
3.0
76
4.0
102
5.0
127
6.0
152
7.0
178
8.0
203
10.0
254
12.0
305
16.0
406
20.0
508
24.0
610
28.0
711
32.0
813
36.0
914
40.0
1016
(2)
(2)
48.0
1219
(2)
(2)
60.0
1524
Back to
Face
Nominal
L
1.62
41
2.06
52
2.44
62
3.19
81
3.94
100
4.75
121
5.5
140
6.25
159
7.75
197
9.31
237
12.31
313
15.38
391
18.38
467
21.0
533
24.0
610
27.0
686
30.0
762
36.0
914.4
45.0
1143
STANDARD WEIGHT
Long
Radius
Inside
Wall
Diameter Thickness Approx.
Weight
I.D.
T
.622
.109
.25
15.80
2.77
.11
.824
.113
.33
20.93
2.87
.15
1.049
.133
.75
26.64
3.38
.34
1.380
.140
1.0
35.05
3.56
.45
1.610
.145
1.5
40.89
3.68
.68
2.067
.154
3.0
52.50
3.91
1.35
2.469
.203
6.0
62.71
5.16
2.70
3.068
.216
9.0
77.93
5.49
4.05
3.548
.226
12.5
90.12
5.74
5.63
4.026
.237
17.0
102.26
6.02
7.65
5.047
.258
28.5
128.19
6.55
12.83
6.065
.280
46
154.05
7.11
20.70
7.981
.322
90
202.72
8.18
40.50
10.02
.365
156
254.5
9.27
70.20
12.00
.375
236
304.8
9.53
106.20
13.25
.395
294
336.6
9.53
132.30
15.25
.375
404
387.4
9.53
181.80
17.25
.375
512
438.2
9.53
230.4
19.25
.375
617
489.0
9.53
277.7
21.25
.375
787
539.8
9.53
354.2
23.25
.375
890
590.6
9.53
400.5
25.25
.375
1100
641.4
9.53
495.0
29.25
.375
1441
743.0
9.53
648.5
(1) These sizes of Short Radius Returns are not available.
(2) Available by special order only.
(3) These sizes not covered by ASME/ANSI B16.9 or ASME/ANSI B16.28.
Particulars and specifications of Long Radius, Sch. 160 and XXS, and Short Radius XXS available on request.
These fittings are also available in other sizes and/or wall thicknesses.
INCHES
POUNDS
MILLIMETRES
KILOGRAMS
7 de 17
EXTRA STRONG
Short
Radius
Approx.
Weight
(1)
(1)
(1)
(1)
.50
.23
.75
.34
1.0
.45
1.8
.81
3.5
1.58
6.0
2.70
8.0
3.60
12.0
5.40
19.0
8.55
31.0
14
62
28
110
49.5
156
70
208
94
236
106
296
133
420
189
(2)
(2)
576
259
(2)
(2)
960
432
Long
Radius
Inside
Wall
Diameter Thickness Approx.
Weight
I.D.
T
.546
.147
.45
13.87
3.73
.20
.742
.154
.45
18.85
3.91
.20
.957
.179
1.0
24.31
4.55
.45
1.278
191
1.5
32.46
4.85
.68
1.500
.200
2.0
38.10
5.08
.90
1.939
.213
4.4
49.25
5.54
2.0
2.323
.276
7.5
59.00
7.01
3.38
2.900
.300
12.0
73.66
7.62
5.40
3.364
.318
17.0
85.45
8.08
7.65
3.826
.337
23.5
97.18
8.56
10.6
4.813
.375
40.0
122.25
9.53
18
5.761
.432
67
146.33
10.97
30
7.625
.500
138
193.68
12.70
62
9.750
.500
215
247.65
12.70
62
11.750
.500
300
298.45
12.70
135
13.00
.500
376
330.2
12.70
236
15.00
.500
524
381.0
12.70
236
17.00
.500
676
431.8
12.70
304
19.00
.500
824
482.6
12.70
371
21.00
.500
1040
533.4
12.70
468
23.00
.500
1183
584.2
12.70
468
25.00
.500
1458
635.0
12.70
656
29.00
.500
1910
736.6
12.70
860
Short
Radius
Approx.
Weight
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
1.5
.68
3.0
1.35
4.5
2.03
7.5
3.38
11.0
5
15.5
7
27.0
12
45.0
20
92
41
142
41
200
90
264
144
320
144
388
175
560
252
(2)
(2)
740
(2)
(2)
(2)
1272
572
VEMACERO, C.A. TELF (251) 269-2898 / 2487
ventas@vemacero.com
STRAIGHT TEES
& CROSSES*
Standard Weight and
Extra Strong
Carbon and ferritic alloy steel,
ASTM A-234, ASME/ANSI B16.9
STANDARD WEIGHT
NPS
DN
1/2
15
3/4
20
1
25
1 1/4
32
1 1/2
40
2
50
2 1/2
65
3
80
3 1/2
90
4
100
5
125
6
150
8
200
10
250
12
300
14
350
16
400
18
450
20
500
22
550
24
600
26
650
30
750
36
900
42
1100
Outside
Diameter
O.D.
.840
21
1.050
27
1.315
33
1.660
42
1.900
48
2.375
60
2.875
73
3.500
89
4.000
102
4.500
114
5.563
141
6.625
188
8.625
218
10.750
273
12.750
324
14.000
356
16.000
406
18.000
457
20.000
508
22.000
559
24.000
10
26.000
860
30.000
762
36.000
914
42.000
1067
Centre to
End,
Run.
C
1.00
25
1.12
29
1.50
38
1.88
48
2.25
57
2.50
64
3.00
76
3.38
86
3.75
95
4.12
105
4.88
125
5.62
143
7.00
178
8.50
216
10.0
254
11.0
279
12.0
305
13.5
343
15.0
381
16.5
419
17.0
432
19.5
495
22.0
559
26.5
673
30.0
762
Center to
End,
Outlet
M
1.00
25
1.12
29
1.50
38
1.88
48
2.25
57
2.50
64
3.00
76
3.38
86
3.75
95
4.12
105
4.88
125
5.62
143
7.00
178
8.50
216
10.0
254
11.0
279
12.0
305
13.5
343
15.0
381
16.5
419
17.0
590.6
19.5
495
22.0
559
26.5
673
28.0
711
Inside
Diameter
I.D.
.622
15.80
.824
20.93
1.049
26.64
1.380
35.05
1.610
40.89
2.067
52.50
2.469
62.71
3.068
77.93
3.548
90.12
4.026
102.3
5.047
128.2
6.065
154.0
7.981
202.7
10.02
254.5
12.00
304.8
13.25
336.6
15.25
387.4
17.25
438.2
19.25
489.0
21.25
539.8
23.25
9.53
25.25
641.4
29.25
743.0
35.25
895.4
41.25
1048
Wall
Thickness
T
.109
2.77
.113
2.87
.133
3.38
.140
3.56
.145
3.68
.154
3.91
.203
5.16
.216
5.49
.226
5.74
.237
6.02
.258
6.55
.280
7.11
.322
8.18
.365
9.27
.375
9.53
.375
9.53
.375
9.53
.375
9.53
.375
9.53
.375
9.53
.375
259
.375
9.53
.375
9.53
.375
9.53
.375
9.53
Tees size 20 NPS (DN 500) and smaller, and Crosses size 16 NPS (DN 400) and smaller,
are normally furnished as seamless. Larger size non-seamless Tees and Crosses are
produced from X-rayed, stress relieved welded pipe. Welds are 100% radiographed in
accordance with the requirements of ASME Boiler & Pressure Vessel Code.
Approx.
Weight
Tee
.25
.11
.37
.17
.63
.28
1.25
.57
1.5
.68
2.0
.9
4.0
1.8
6.0
2.7
7.5
3.4
10.2
4.6
16
7.3
23.5
10.7
44.8
20
74.2
34
126
56.70
159
71.55
220
99.0
295
132.8
363
163.4
449
202
515
103
655
295
1010
455
1450
653
1730
779
EXTRA STRONG
Approx.
Weight
Cross
1.60
.72
2.10
.95
2.55
1.15
3.40
1.53
4.10
1.85
5.65
2.54
9.25
4.16
11.20
5.04
25.0
11
41.5
19
72
32
96
43
121
54
145
65
170
77
195
88
230
584.2
-
Inside
Diameter
I.D.
.546
187
.742
18.85
.957
24.31
1.278
32.46
1.500
38.10
1.939
49.25
2.323
59.00
2.900
73.66
3.364
85.45
3.826
97.18
4.813
122.2
5.761
146.3
7.625
193.7
9.750
247.6
11.750
298.4
13.00
330.2
15.00
381.0
17.00
431.8
19.00
482.6
21.00
533.4
23.00
12.70
25.00
635.0
29.00
736.6
35.00
889.0
41.00
1041
Wall
Thickness
T
.147
3.73
.154
3.91
.179
4.55
.191
4.85
.200
5.08
.218
5.54
.276
7.01
.300
7.62
.318
8.08
.337
8.56
.375
9.53
.432
10.97
.500
12.70
.500
12.70
.500
12.70
.500
12.70
.500
12.70
.500
12.70
.500
12.70
.500
12.70
.500
281
.500
12.70
.500
12.70
.500
12.70
.500
12.70
Approx.
Weight
Tee
.34
.15
.44
.2
.8
.36
1.6
.73
2.0
.9
3.0
1.3
5.7
2.6
7.7
3.5
10.0
.45
14
6.3
23
10.4
38.2
17
67
30
110
50
165
74
225
101
265
119
358
161
358
161
540
243
625
135
840
378
1175
529
1650
743
1970
887
Approx.
Weight
Cross
2.20
.99
2.60
1.17
3.25
1.46
4.15
1.87
6.20
2.79
9.50
4.28
12.7
5.72
18.0
9.1
31.5
14
52.0
24
85.0
38
130
59
145
65
180
81
210
95
210
95
300
-
*Reduced outlet crosses available on request. These fittings are also available in other
sizes and/or wall thicknesses.
8 de 17
INCHES
POUNDS
MILLIMETRES
KILOGRAMS
VEMACERO, C.A. TELF (251) 269-2898 / 2487
ventas@vemacero.com
STRAIGHT TEES
Schedule 160 &
Double Extra Strong
Carbon and ferritic alloy steel,
ASTM A-234,
ASME/ANSI B16.9
SCHEDULE 160
NPS
DN
3/4
20
1
25
1 1/4
32
1 1/2
40
2
50
2 1/2
65
3
80
3 1/2
90
4
100
5
125
6
150
8
200
10
250
12
300
14
350
16
400
Outside
Diameter at
Bevel
O.D.
1.050
27
1.315
33
1.660
42
1.900
48
2.375
60
2.875
73
3.500
89
4.000
102
4.500
114
5.563
141
6.625
188
8.625
219
10.750
273
12.750
324
14.000
356
16.000
406
Centre to End, Center to End,
Run.
Outlet.
Nominal
Nominal
C
M
1.12
1.12
29
29
1.50
1.50
38
38
1.88
1.88
48
48
2.25
2.25
57
57
2.50
2.50
64
64
3.00
3.00
76
76
3.38
3.38
86
86
3.75
3.75
95
95
4.12
4.12
105
105
4.88
4.88
124
124
5.62
5.62
143
143
7.00
7.00
178
178
8.50
8.50
216
216
10.00
10.00
254
254
11.00
11.00
279
279
12.00
12.00
305
305
INCHES
POUNDS
MILLIMETRES
KILOGRAMS
Inside
Diameter
I.D.
.612
15.54
.815
20.70
1.160
29.46
1.338
33.99
1.687
42.85
2.125
53.98
2.624
66.65
3.438
87.33
4.313
109.6
5.187
131.8
6.813
173.1
8.500
215.9
10.126
257.2
11.188
284.2
12.812
325.4
9 de 17
Wall
Thickness
T
.219
5.6
.250
6.35
.250
6.35
.281
7.14
.344
8.74
.375
9.53
.438
11.13
.531
13.49
.625
15.88
.719
18.26
.906
23.01
1.125
28.58
1.312
33.32
1.406
35.71
1.594
40.49
DOUBLE EXTRA STRONG
Approx.
Weight
.65
.29
1.10
.50
2.10
.95
3.00
1.35
4.5
2.03
7.0
3.15
11.5
5.18
21.5
9.7
37
17
63
28
114
51
265
119
389
175
525
236
820
369
Inside
Diameter
I.D.
.434
11.02
.599
15.21
.896
22.76
1.100
27.94
1.503
38.18
1.771
44.98
2.300
58.42
2.728
69.29
3.152
80.06
4.063
103.2
4.897
124.4
6.875
174.6
-
Wall
Thickness
T
.308
7.82
.358
9.09
.382
9.70
.400
10.16
.436
11.07
.552
14.02
.600
15.24
.636
16.15
.674
17.12
.750
19.05
.864
21.95
.875
22.23
-
Approx.
Weight
1.16
.52
1.25
.56
2.32
1.04
3.38
1.52
5.20
2.34
9.63
4.33
13.5
6.08
23
10.35
25
11
40
18
66
30
120
54
-
VEMACERO, C.A. TELF (251) 269-2898 / 2487
ventas@vemacero.com
*REDUCING TEES
& REDUCERS
Concentric and Eccentric
Standard Weight, Extra Strong,
Schedule 160,
Double Extra Strong
Carbon and ferritic alloy steel,
ASTM A-234, ASME/ANSI B16.9
Outlet or
Reduced End
Run
NPS
NPS
DN
1/2
DN
▲
1/4
▲
3/8
15
6
10
#▲3/8
3/4
20
10
1/2
15
1
3/8
25
10
1/2
15
3/4
20
1 1/4
1/2
32
15
3/4
20
1
25
1 1/2
1/2
40
15
3/4
20
1
25
1 1/4
32
2
3/4
50
20
1
25
1 1/4
32
1 1/2
40
2 1/2
1
65
25
1 1/4
32
1 1/2
40
2
50
#▲ 1
3
80
25
1 1/4
32
1 1/2
40
2
50
Nominal
Center-to-End Tees
Run
Outlet
C
1.00
25
1.00
25
1.12
29
1.12
29
1.50
38
1.50
38
1.50
38
1.88
48
1.88
48
1.88
48
2.25
57
2.25
57
2.25
57
2.25
57
2.50
64
2.50
64
2.50
64
2.50
64
3.00
76
3.00
76
3.00
76
3.00
76
3.38
86
3.38
86
3.38
86
3.38
86
M
1.00
25
1.00
25
1.12
29
1.12
29
1.50
38
1.50
38
1.50
38
1.88
48
1.88
48
1.88
48
2.25
57
2.25
57
2.25
57
2.25
57
1.75
44
2.00
51
2.25
57
2.38
60
2.25
57
2.50
64
2.62
67
2.75
70
2.62
67
2.75
70
2.88
73
3.00
76
Nominal
Length
of
Reducers
L
1.5
■
38
1.5
38
2.0
51
2.0
51
2.0
51
2.0
51
2.0
51
2.0
51
2.5
64
2.5
64
2.5
64
2.5
64
3.0
76
3.0
76
3.0
76
3.0
76
3.5
89
3.5
89
3.5
89
3.5
89
3.5
■
89
3.5
89
3.5
89
3.50
89
APPROXIMATE WEIGHTS
STANDARD WEIGHT
Tee
.25
.11
.25
.11
.37
.17
.37
.17
.60
.25
.65
.27
.69
.31
1.3
.59
1.2
.54
1.2
.54
2.1
.95
1.8
.82
1.7
.77
1.7
.77
2.0
.91
2.0
.91
2.1
.95
2.2
1.00
3.0
1.36
3.2
1.45
3.5
1.60
3.5
1.60
5.0
2.27
5.1
2.31
5.1
2.31
5.2
2.36
Reducer
.22
0.1
.25
0.1
.27
0.1
.30
0.14
.32
0.15
.34
0.15
.37
0.17
.39
0.18
.44
0.2
.47
0.21
.50
0.23
.58
0.26
.82
.37
.89
.40
.94
.43
1.03
.47
1.42
.64
1.59
.72
1.71
.78
1.84
2.5
2.10
1.0
2.28
1.0
2.42
1.1
2.56
1.16
10 de 17
EXTRA STRONG
SCHEDULE 160
Tee
.27
.12
.28
.13
.43
.20
.44
.20
.75
.34
.75
.34
.80
.40
1.65
.75
1.66
.75
1.90
.86
2.2
1.00
2.3
1.04
.4
1.10
2.6
1.18
2.7
1.22
2.7
1.22
2.8
1.27
2.8
1.27
4.2
1.91
4.3
1.95
4.5
2.04
4.5
2.04
6.0
2.72
6.0
2.72
6.12
2.81
6.4
2.95
Tee
.63
.29
.63
.29
.90
.41
.90
.41
1.00
.45
1.67
.76
1.68
.76
2.00
.91
2.41
1.09
2.49
1.13
2.60
1.18
2.90
1.32
3.35
1.52
3.60
1.63
3.75
1.70
3.90
1.77
5.90
2.68
6.00
2.72
6.20
2.81
6.60
3.00
9.20
4.17
9.35
4.24
9.68
4.4
Reducer
.24
.11
.25
.11
.31
.14
.33
.15
.36
.16
.42
.19
.46
.21
.49
.22
.52
.24
.55
.25
.61
.28
.66
.30
.89
.40
.90
.41
1.02
.46
1.20
.54
1.55
.70
1.75
.79
2.02
.92
2.25
1.02
2.45
1.11
2.60
1.18
2.70
1.22
2.75
1.25
Reducer
.27
.12
.29
.13
.31
.14
.6
.16
.41
.19
.46
.21
.51
.23
.59
.27
.66
.30
.74
.34
.81
.37
.90
.41
1.30
.59
1.52
.69
1.78
.81
1.84
.83
2.10
.95
2.31
1.05
2.43
1.10
2.59
1.17
2.91
1.32
3.10
1.41
3.43
1.6
DOUBLE EXTRA STRONG
Tee
1.12
.51
1.14
.52
1.19
.54
1.95
.88
2.02
.92
2.14
.97
2.84
1.29
2.93
1.33
3.08
1.40
3.26
1.48
4.26
1.93
4.41
2.00
4.65
2.11
5.18
2.35
8.00
3.63
8.40
3.81
9.13
4.14
9.18
4.16
12.0
5.4
12.2
5.5
12.5
5.7
Reducer
2.50
1.13
2.50
1.13
2.60
1.18
2.61
1.18
2.72
1.23
2.894
1.94
2.90
1.32
2.96
1.34
2.99
1.36
3.02
1.37
3.06
1.39
3.12
1.42
3.20
1.45
3.31
1.50
3.40
1.54
3.46
1.57
3.52
1.60
3.64
1.65
3.75
1.70
3.9
1.77
4.00
1.8
INCHES
POUNDS
MILLIMETRES
KILOGRAMS
VEMACERO, C.A. TELF (251) 269-2898 / 2487
ventas@vemacero.com
*REDUCING TEES & REDUCERS CONCENTRIC AND ECCENTRIC continued
Outlet or
Reduced End
Run
NPS
NPS
DN
DN
2 1/2
65
3 1/2
#1 14
90
32
1 1/2
40
2
50
2 1/2
65
3
80
#▲ 1
4
100
25
1 1/2
40
2
50
2 1/2
65
3
80
3 1/2
90
5
2
125
50
2 1/2
65
3
80
3 1/2
90
4
100
#▲ 2
6
150
50
2 1/2
65
3
80
3 1/2
90
4
100
5
125
#▲ 3
8
200
80
3 1/2
90
4
100
5
125
6
150
#▲ 3
10
250
80
4
100
5
125
6
150
8
200
Nominal
Center-to-End Tees
Run
Outlet
C
3.38
86
3.75
95
3.75
95
3.75
95
3.75
95
4.12
105
4.12
105
4.12
105
4.12
105
4.12
105
4.88
124
4.88
124
4.88
124
488
124
4.88
124
5.62
143
5.62
143
5.62
143
5.62
143
5.62
143
5.62
143
7.00
178
7.00
178
7.00
178
7.0
178
7.0
178
8.5
216
8.5
216
8.5
216
8.5
216
8.5
216
M
3.25
83
3.12
79
3.25
83
3.50
89
3.62
92
3.38
86
3.50
89
3.75
95
3.88
98
4.00
102
4.12
105
4.25
108
4.38
111
4.50
114
4.62
117
4.75
121
4.75
121
4.88
124
5.00
127
5.12
130
5.38
137
6.00
152
67.00
152
6.12
156
6.38
162
6.62
168
7.25
184
7.25
184
7.50
191
7.62
194
8.00
203
Nominal
Length
of
Reducers
L
3.5
89
4.00
■
102
4.00
102
4.00
102
4.00
102
4.00
102
4.00
■
102
4.00
102
4.00
102
4.00
102
4.00
102
4.00
102
5.00
127
5.00
127
5.00
127
5.00
127
5.00
127
■ 5.50
140
5.50
140
5.50
140
5.50
140
5.50
140
5.50
140
■ 6.00
152
6.00
152
6.00
152
6.0
152
6.0
152
7.0
■
178
7.0
178
7.0
178
7.0
178
7.0
178
APPROXIMATE WEIGHTS
STANDARD WEIGHT
Tee
6.0
2.72
7.5
3.40
7.5
3.40
8.2
3.72
8.3
3.76
9.5
4.31
12.0
5.44
12.0
5.44
9.4
4.26
9.4
4.26
9.5
4.31
10.0
4.35
14.5
6.6
14.5
6.6
14.5
6.6
15.0
6.8
15.1
6.9
19.5
8.9
20.0
9.1
21.0
9.5
21.5
9.8
21.5
9.8
23
10.4
38
17.2
39
17.7
40.5
18.4
41.0
18.6
44.0
20
72.0
32
75.0
34
75.0
34
79.0
36
79.2
36
Reducer
2.64
1.20
2.68
68.1
2.72
1.23
2.77
1.26
2.82
1.28
2.88
1.31
2.91
73.9
2.94
1.33
2.97
1.35
3.02
1.37
3.08
1.40
3.12
1.42
3.28
1.49
3.36
1.52
3.55
1.61
3.69
1.67
3.81
1.74
4.28
1.94
4.40
2.00
4.64
2.10
4.81
21.8
5.06
2.30
5.32
2.41
7.29
3.31
7.65
3.47
8.12
3.68
8.53
3.8
9.02
4.1
11.0
5.0
12.5
5.6
15.0
6.8
17.0
7.7
21.0
9.5
EXTRA STRONG
Tee
7.5
3.40
11.0
5.0
11.2
5.1
12.0
5.4
12.6
5.7
13.0
5.9
13.0
5.9
13.6
6.2
14.2
6.4
14.9
6.8
18.0
8.1
18.2
8.3
18.8
8.5
20.0
9.1
22.5
10.2
30
13.6
31
14.1
31.5
14.3
32.0
14.5
32.5
14.7
33.0
15
63
29
63
29
64
29
65
30
65
30
90
41
92
41
96
43
98
44
100
45
Reducer
2.90
1.32
3.10
78.7
3.20
1.45
3.35
1.52
3.50
1.59
4.00
1.81
4.10
104.1
4.30
1.95
4.50
2.04
4.60
2.1
4.75
2.2
4.90
2.2
5.30
2.4
5.50
2.5
5.75
2.6
6.10
2.8
6.50
3.0
7.75
3.5
8.25
3.7
8.75
4.0
9.50
4.3
11.00
5.0
12.00
5.4
14.50
6.6
16.0
7.3
16.5
7.5
17.0
7.7
18.5
8.4
21.0
9.5
23.0
10.4
25.0
11.3
28.0
12.7
29.5
13.4
SCHEDULE 160
Tee
10.20
4.6
16.8
7.6
17.2
7.8
17.7
8.0
18.5
8.4
30.5
13.8
31.0
14.1
31.7
14.4
33.2
15.1
45.5
20.6
48.2
21.9
48.9
22.2
50.5
22.9
52.6
23.9
98.7
44.8
101
46
104
47
181
82
183
83
190
86
193
88
208
94
DOUBLE EXTRA STRONG
Reducer
3.75
1.7
5.40
2.5
5.59
2.5
5.64
2.6
5.81
2.6
7.95
3.6
9.00
4.1
10.5
4.8
11.7
5.3
13.0
5.9
15.0
6
17.5
7.9
19.1
7
28.5
12.9
33.0
15.0
37.0
17
41.0
19
45.0
20.5
49.0
22
53.0
24
59.0
27
*Wall thickness and other pipe size data are in accordance with ASME/ANSI B36.10M.
INCHES
POUNDS
MILLIMETRES
KILOGRAMS
11 de 17
Tee
13.5
6.1
16.3
7.4
16.7
7.6
17.5
7.9
18.5
8.4
21.5
9.8
22.0
10.0
22.7
10.3
23.3
10.6
24.5
11
35.6
16.2
36.2
16.4
37.2
17
38.0
17
39.0
18
53.0
24
56.6
26
57.5
26
58.5
27
59.3
27
62.1
28
96.5
44
97.5
44
100
45.5
104
47
-
Reducer
4.25
1.9
4.72
119.9
5.30
2.4
5.64
2.6
5.92
2.7
6.20
2.8
6.53
3.0
6.72
3.1
6.89
3.1
7.10
3.2
7.40
3.4
10.5
4.8
12.2
5.5
13.7
6.2
14.9
6.8
15.5
7.0
17.5
7.9
18.2
8.3
19.0
8.6
19.7
89
21.0
9.5
25.7
11.7
27.1
12.3
28.5
13
29.7
13.5
33.0
15
41.0
19
44.0
20
48.0
22
52.0
24
VEMACERO, C.A. TELF (251) 269-2898 / 2487
ventas@vemacero.com
REDUCING TEES & REDUCERS CONCENTRIC AND ECCENTRIC continued
Outlet or
Reduced End
NPS
NPS
DN
DN
#▲4
12
300
100
5
125
6
150
8
200
10
250
▲
14
6
350
150
8
200
10
250
12
300
▲
16
6
400
150
8
200
10
250
12
300
14
350
▲
18
8
450
200
10
250
12
300
14
350
16
400
20
▲
8
▲
10
500
200
250
12
300
14
350
16
400
18
450
22
▲
10
▲
12
550
250
300
14
350
16
400
18
450
20
500
24
▲
10
▲
12
▲
14
600
250
300
350
16
400
Nominal
Center-to-End Tees
Run
Outlet
C
10.0
254
10.0
254
10.0
254
10.0
254
10.0
254
11.0
279
11.0
279
11.0
29
11.0
279
12.0
305
12.0
305
12.0
305
12.0
305
12.0
305
13.5
343
13.5
343
13.5
343
13.5
343
13.5
343
15.0
381
15.0
381
15.0
381
15.0
381
15.0
381
15.0
381
16.5
419
16.5
419
16.5
419
16.5
419
16.5
419
16.5
419
17.0
43
17.0
432
17.0
432
17.0
432
M
8.50
216
8.50
216
8.63
219
9.00
229
9.50
241
9.38
238
9.75
248
10.13
257
10.63
270
1038
264
10.75
273
11.13
283
11.63
295
12.00
305
11.75
298
12.13
308
12.63
321
13.00
330
13.00
330
12.75
324
13.13
333
13.63
346
14.00
356
14.00
356
14.50
368
14.13
359
14.63
371
15.00
381
15.00
381
15.50
394
16.00
406
15.13
384
15.63
397
16.00
406
16.00
406
Nominal
Length
of
Reducers
L
8.0
■
203
8.0
203
8.0
203
8.0
203
8.0
203
13.0
330
13.0
330
13.0
330
13.0
330
14.0
356
14.0
356
14.0
356
14.0
356
14.0
356
15.0
381
15.0
381
15.0
381
15.0
381
15.0
381
■ 20.0
508
20.0
508
20.0
508
20.0
508
20.0
508
20.0
508
20.0
■
508
20.0
508
20.0
508
20.0
508
20.0
508
20.0
508
■ 20.0
508
20.0
508
20.0
508
20.0
508
APPROXIMATE WEIGHTS
STANDARD WEIGHT
Tee
101
46
105
47
105
47
105
47
130
59
146
66
147
66
149
67
152
68
179
81
186
84
196
88
211
95
219
99
236
106
249
112
261
117
270
122
282
127
294
133
307
139
316
143
329
149
341
155
355
161
366
166
382
173
395
179
412
187
429
195
443
201
451
25
455
206
268
12
479
217
Reducer
23.0
10.4
25.0
11.3
28.0
12.6
30.0
13.5
32.0
14.4
58.0
26
59.5
27
61.0
27
64.0
29
69.0
31
72.0
32
75.0
34
80
36
81
36
82
37
84
38
85
38
110
50
117
53
123
56
126
57
128
58
133
60
140
64
143
65
149
68
152
69
154
70
156
7117
12 de
EXTRA STRONG
SCHEDULE 160
Tee
132
59
134
60
136
61
140
63
148
67
184
83
187
84
190
86
196
88
231
104
236
106
248
111
259
117
261
117
302
136
311
140
332
149
340
153
352
158
379
172
385
175
401
182
418
190
432
196
449
204
471
214
479
217
487
221
499
226
522
237
540
245
556
252
562
255
571
259
585
285
Tee
301
137
305
139
308
140
315
143
332
151
410
186
435
197
470
213
495
225
540
245
565
256
610
277
675
340
750
340
-
Reducer
32
14.5
33
15
34
15.5
36
16
39
18
59
27
61
28
62
28
75
34
89
40
95
43
101
48
106
48
112
51
115
52
117
53
119
54
149
68
153
69
158
72
165
75
168
76
171
78
175
79
181
82
183
83
187
85
191
87
194
88
INCHES
Reducer
72.0
32.5
75.0
34
83.0
38
94.0
43
110
50
125
57
137
62
153
69
168
76
190
86
220
120
265
120
-
DOUBLE EXTRA STRONG
Tee
-
Reducer
67.0
30
69.0
31
72.0
33
75.0
34
-
POUNDS
MILLIMETRES
KILOGRAMS
VEMACERO, C.A. TELF (251) 269-2898 / 2487
ventas@vemacero.com
REDUCING TEES & REDUCERS CONCENTRIC AND ECCENTRIC continued
Nominal
APPROXIMATE WEIGHTS
Length
of
Run
Outlet
STANDARD WEIGHT
EXTRA STRONG
SCHEDULE 160
Reducers
NPS
NPS
C
M
L
Tee
Reducer
Tee
Reducer
Tee
Reducer
DN
DN
24
18
17.0
16.50
20.0
490
160
597
198
600
450
432
419
508
222
73
271
90
20
17.0
17.00
20.0
506
165
614
205
500
432
432
508
230
75
279
93
19.5
16.63
534
665
26
#▲ 12
■ 24.0
650
300
495
422
610
242
302
▲
14
19.5
17.00
547
679
■ 24.0
350
495
432
610
248
308
▲
16
19.5
17.00
24.0
561
691
400
495
432
610
254
313
18
19.5
17.50
24.0
575
170
714
215
450
495
444
610
261
77
324
98
20
19.5
18.00
24.0
592
172
733
221
500
495
457
610
268
78
332
100
22
19.5
18.50
24.0
623
174
756
229
550
495
470
610
283
79
343
104
24
19.5
19.00
24.0
643
177
780
235
600
495
483
610
292
80
354
107
▲
14
22.0
19.0
675
865
30
■ 24.0
750
350
559
483
610
305
392
▲
16
22.0
19.0
690
895
■ 24.0
400
559
483
610
313
406
▲
18
22.0
19.5
721
932
■ 24.0
450
559
495
610
327
423
20
22.0
20.0
744
180
978
264
■ 24.0
500
559
508
610
337
82
444
120
22
22.0
20.5
24.0
768
200
1031
270
550
559
521
610
348
91
468
122
24
22.0
21.0
24.0
792
215
1050
275
600
559
533
610
359
98
476
125
26
22.0
21.5
24.0
845
235
1085
282
650
559
546
610
383
107
492
128
▲
16
26.5
22.0
1280
1220
36
■ 24.0
900
400
673
559
610
581
553
▲
18
26.5
22.5
1305
1310
■ 24.0
450
673
572
610
592
594
▲
20
26.5
23.0
1360
319
1395
320
■ 24.0
500
673
584
610
617
141
633
145
▲
22
26.5
23.5
1390
146
■ 24.0
550
673
597
610
631
665
24
26.5
24.0
24.0
1410
340
1510
360
600
673
610
610
640
154
685
163
26
26.5
24.5
24.0
1425
1555
650
673
622
610
646
705
30
26.5
25.0
24.0
1432
375
1595
385
750
673
635
610
650
170
723
175
▲
18
30.0
25.5
24.0
1550
1770
42
1100
450
762
648
610
703
803
▲
20
30.0
26.0
24.0
1590
1810
500
762
660
610
721
821
▲
22
30.0
26.0
24.0
1630
1850
550
762
660
610
739
839
▲
24
30.0
26.0
24.0
1645
390
1865
405
600
762
660
610
745
177
846
184
▲
26
30.0
27.5
24.0
1665
425
1890
440
650
762
698
610
755
193
857
200
30
30.0
28.0
1690
445
1910
465
■ 24.0
750
762
711
610
767
202
866
211
36
30.0
28.0
1710
470
1935
495
■ 24.0
900
762
711
610
776
213
878
225
When ordering Reducing Tees, specify the run pipe size first, followed by the outlet size. Example 2 x 2 x 1.
When ordering Reducers, specify the Large End first, followed by the Small End size and the type. Example: 2 x 1 eccentric.
These fittings are also available in other sizes and/or wall thicknesses.
Wall thickness and other pipe size data are in accordance with ASME/ANSI B36.10M. Refer to page 6.
Outlet or
Reduced End
Nominal
Center-to-End Tees
#This size of Reducing Outlet Tee is not covered in ANSI B16.9
▲ This size of Reducer is not covered in ANSI B16.9
■ This size of Reducer supplied concentric, only.
INCHES
POUNDS
MILLIMETRES
KILOGRAMS
DOUBLE EXTRA STRONG
Tee
-
Reducer
-
Tees size 20 NPS (DN 500) and smaller, and Reducers size 24 NPS (DN 600)
and smaller, are normally furnished as seamless. Larger size non-seamless
Tees and Reducers are produced from X-rayed, stress relieved welded pipe.
Welds are 100% radiographed in accordance with the requirements of the
ASME Boiler & Pressure Vessel Code.
13 de 17
VEMACERO, C.A. TELF (251) 269-2898 / 2487
ventas@vemacero.com
CAPS
Standard, Extra Strong,
Schedule 160,
Double Extra Strong
Carbon and ferritic alloy steel,
ASTM A-234
ASME/ANSI B16.9
STANDARD WEIGHT
NPS
1/2
3/4
1
1 1/4
1 1/2
2
2 1/2
3
3 1/2
4
5
6
8
10
12
14
16
18
20
22
24
26
30
36
42
Outside
Diameter
Wall
Nominal
at Bevel Thickness Length
(1)
DN
E
O.D.
T
.840
.109
1.0
15
21
2.77
25
1.050
.113
1.0
20
27
2.87
25
1.315
.133
1.5
25
33
3.38
38
1.660
.140
1.5
32
42
3.56
38
1.900
.145
1.5
40
48
3.68
38
2.375
.154
1.5
50
60
3.91
38
2.875
.203
1.5
65
73
5.16
38
3.500
.216
2.0
80
89
5.49
51
4.000
.226
2.5
90
102
5.74
64
4.500
.237
2.5
100
114
6.02
64
5.563
.258
3.0
125
141
6.55
78
6.625
.280
3.5
150
168
7.11
89
8.625
.322
4.0
200
219
8.18
102
10.750
.365
5.0
250
273
9.27
127
12.750
.375
6.0
300
324
9.53
152
14.000
.375
6.5
350
356
9.53
165
16.000
.375
7.0
400
405
9.53
178
18.000
.375
8.0
450
457
9.53
203
20.000
.375
9.0
500
508
9.53
229
22.000
.375
10.0
550
559
9.53
254
24.000
.375
10.5
600
610
9.53
267
26.000
.375
10.5
650
680
9.53
267
30.000
.375
10.5
750
762
9.53
267
36.000
.375
10.5
900
914
9.53
267
42.000
.375
12.0
1100
1067
9.53
305
EXTRA STRONG
Wall
Nominal
Approx. Thickness Length
(1)
Weight
T
E
.1
.147
1.0
.05
3.73
25
.1
.154
1.0
.05
3.91
25
.2
.179
1.5
.09
4.55
38
.3
.191
1.5
.14
4.85
.38
.4
.200
1.5
.18
5.08
38
.6
.218
1.5
.27
5.54
38
.9
.276
1.5
.41
7.01
38
1.4
.300
2.0
.64
7.62
51
2.2
.318
2.5
1.0
8.08
64
3.0
.337
2.5
1.4
8.56
64
4.5
.375
3.0
2.0
9.53
76
7.2
.432
3.5
3.3
10.97
89
12.0
.500
4.0
5.4
12.70
102
18
.500
5.0
8.2
12.70
127
27
.500
6.0
12
12.70
152
33
.500
6.5
15
12.70
185
42
.500
7.0
19
12.70
178
55
.500
8.0
25
12.70
203
68
.500
9.0
31
12.70
229
86
.500
10.0
39
12.70
254
96
.500
10.5
44
12.70
267
110
.500
10.5
50
12.70
267
132
.500
10.5
60
12.70
267
192
.500
10.5
87
12.70
267
225
.500
12.0
102
12.70
305
SCHEDULE 160
DOUBLE EXTRA STRONG
Wall
Nominal
Wall
Nominal
Approx. Thickness Length
Approx. Thickness Length
Approx.
(1)
(1)
Weight
T
E
Weight
T
E
Weight
.09
.04
.1
.05
.2
.250
1.5
.4
.38
1.5
1.0
.09
6.35
38
.2
9.09
38
.45
.4
.250
1.5
.5
.382
1.5
1.5
.18
6.35
38
.2
9.70
38
.68
.5
.281
1.5
.6
.400
1.5
2.5
.23
7.14
38
.3
10.16
38
1.1
.8
.344
1.75
1.25
.436
1.75
3.0
.36
8.74
44
.6
11.07
44
1.4
1.0
.375
2.0
1.75
.552
2.0
4.0
.45
9.53
51
.8
14.02
51
1.8
2.0
.438
2.5
2.9
.600
2.5
6.0
.91
11.13
64
1.3
15.24
64
2.7
(2)
.636
3.0
7.5
2.8
(2)
16.15
76
3.4
1.3
3.5
.531
3.0
5.9
.674
3.0
9.0
1.6
13.49
76
2.7
17.12
76
4.1
5.8
.625
3.5
10
.750
3.5
13.5
2.6
15.88
89
4.5
19.05
89
5.1
9.2
.719
4.0
15
.864
4.0
18
4.2
18.26
102
6.8
21.95
102
8.2
15
.906
5.0
31
.875
5.0
26
6.8
23.01
127
14
22.23
127
12
25
1.125
6.0
57
11.3
28.58
152
26
35
1.312
7.0
95
16
33.32
178
43
43
1.406
7.5
130
20
35.71
191
59
54
1.594
8.0
165
25
40.49
203
75
73
33
(1) Dimensional tolerances.
90
(2) This size not covered in ASME/ANSI B36.10M.
41
dimensions of wrought steel pipe.
110
These fittings are also available in other sizes and/or wall
50
thicknesses.
127
58
145
66
175
79
235
107
295
134
14 de 17
INCHES
POUNDS
MILLIMETRES
KILOGRAMS
VEMACERO, C.A. TELF (251) 269-2898 / 2487
ventas@vemacero.com
SADDLES
Carbon and ferritic alloy steel,
ASTM A-234
A-515 Gr. 70
A-106 Gr. B
Nominal Size
of Nozzle
NPS
STANDARD WEIGHT
Nominal Header Size
Approx.
Weight
NPS
DN
1/4
DN
1/4 - 48
6
1/2
6 - 1200
1/2 - 48
15
3/4
15 - 1200
3/4 - 48
20
1
20 - 1200
1 - 48
25
1 1/4
25 - 1200
1 1/4 - 48
32
1 1/2
32 - 1200
1 1/2 - 48
40
2
40 - 1200
2 - 48
50
2 1/2
50 - 1200
2 1/2 - 48
65
3
65 - 1200
3 - 48
80
3 1/2
80 - 1200
3 1/2 - 48
90
4
90 - 1200
4 - 48
100
5
100 - 1200
5 - 48
125
6
125 - 1200
6 - 48
150
8
150 - 1200
8 - 48
200
10
200 - 1200
10 - 48
250
12
250 - 1200
12 - 48
300
14
300 - 1200
14 - 48
350
16
350 - 1200
16 - 48
400
18
400 - 1200
18 - 48
450
20
450 - 1200
20 - 48
500
24
500 - 1200
24 - 48
600
600 - 1200
A
.63
16
.81
21
.81
21
.88
22
1.25
32
1.50
38
1.50
38
1.63
41
1.50
38
1.75
44
1.75
44
2.00
51
2.50
64
2.75
70
3.00
76
3.50
89
4.00
102
4.00
102
4.25
108
5.25
133
6.00
152
B
.75
19
.88
22
1.25
32
1.31
33
1.38
35
1.75
44
2.00
51
2.13
54
2.25
57
2.25
57
2.50
64
3.00
76
3.75
95
4.25
108
5.00
127
5.50
140
6.00
152
7.50
191
8.00
203
8.00
203
9.50
241
Saddles are used to reinforce intersecting welded junctions and are
not intended to be used as pressure containing fittings. A vent hole
prevents pressure build-up of welding gasses between saddle and
header. Saddles are made from welding grade seamless steel, and
are fully normalized.
15 de 17
C
.19
4.8
.19
4.8
.19
4.8
.19
4.8
.19
4.8
.25
6.4
.25
6.4
.28
7.1
.31
7.9
.31
7.9
.38
7.9
.38
9.7
.44
11.2
.44
11.2
.44
11.2
.44
11.2
.44
11.2
.44
11.2
.50
12.7
.50
12.7
.50
12.7
D
.22
5.6
.22
5.6
.22
5.6
.22
5.6
.22
5.6
.31
7.9
.31
7.9
.31
7.9
.41
10.4
.41
10.4
.38
9.7
.44
11.2
.50
12.7
.50
12.7
.50
12.7
.50
12.7
.50
12.7
.56
14.2
.63
16.0
.63
16.0
.63
16.0
.5
.23
.5
.23
.75
.34
1.0
.45
1.0
.45
2.0
.90
3.0
1.35
4.0
1.80
5.0
2.25
6.0
2.70
7.0
3.15
12.0
5.40
22.0
10
33.0
15
45.0
20
57.0
26
76
34
107
48
152
69
163
73
248
112
INCHES
POUNDS
MILLIMETRES
KILOGRAMS
VEMACERO, C.A. TELF (251) 269-2898 / 2487
ventas@vemacero.com
WELDING
*LATERALS
Standard Weight
and Extra Strong
Carbon and ferritic alloy steel,
STANDARD WEIGHT
NPS
DN
1
25
1 1/4
32
1 1/2
40
2
50
2 1/2
65
3
80
3 1/2
90
4
100
5
125
6
150
8
200
10
250
12
300
14
350
16
400
18
450
20
500
24
600
A
5.75
146
6.25
159
7.00
178
8.00
203
9.50
241
10.00
245
11.50
292
12.00
305
13.50
343
14.50
368
17.50
445
20.50
521
24.50
622
27.00
686
30.00
762
32.00
813
35.00
889
40.50
1029
B
1.75
45
1.75
45
2.00
51
2.50
64
2.50
64
3.00
76
3.00
76
3.00
76
3.50
89
3.50
89
4.50
114
5.00
127
5.50
140
6.00
152
6.50
165
7.00
178
8.00
203
9.00
229
EXTRA STRONG
Approx.
Weight
1.85
.83
2.60
1.17
3.45
1.55
4.95
2.23
9.5
4.28
12.0
5.40
17.7
8
19.5
9
29.2
13
41.7
19
77.5
35
13
59
190
86
225
101
290
131
340
153
412
185
554
249
A
6.50
165
7.25
184
8.50
216
9.00
229
10.50
267
11.00
279
12.50
318
13.50
343
15.00
381
17.50
445
20.50
521
24.00
610
27.50
699
31.00
787
34.50
876
37.50
953
40.50
1029
47.50
1207
B
2.00
51
2.25
57
2.50
64
2.50
64
2.50
64
3.00
76
3.00
76
3.00
76
3.50
89
4.00
102
5.00
127
5.50
140
6.00
152
6.50
165
7.50
191
8.00
203
8.50
216
10.00
254
Approx.
Weight
2.75
1.24
4.10
1.85
5.35
2.41
7.80
3.51
13.7
6.17
19.2
8.6
26.
12
34.6
16
51.4
23
82.3
37
135
61
199
90
279
126
344
155
432
194
551
248
637
287
903
406
Laterals are fabricated from Grade B standard and extra strong seamless pipe.
The working pressure of any fabricated Lateral must be rated at only 40% of the allowable working pressure established for the pipe from which the
lateral is made. Dimensions and price of 100% strength laterals will be furnished on request.
Laterals are also available in other materials, sizes and/or wall thicknesses.
*Reducing laterals can be supplied withthe same centre-to-end dimensions as shown above.
INCHES
POUNDS
MILLIMETRES
KILOGRAMS
16 de 17
VEMACERO, C.A. TELF (251) 269-2898 / 2487
ventas@vemacero.com
BUTT WELDING ENDS
ASME/ANSI B16.9
For fittings with wall thickness equal to that of the pipe to which they are to be welded.
Nominal Wall
Thickness (T)
End Preparation
Less than x*
Cut square or slightly
camfer, at mfr’s option
x* to .88 incl.
(22)
Plain bevel as in
sketch (a).
More than .88
(22)
Compound bevel as in
sketch (b).
x* = 0.19 (5) for carbon steel or ferritic alloy steel
and 0.12 (4) for austenitic alloy steel.
Millimetres in brackets.
SIZE RANGES
ASME/ANSI B16.9
The following size ranges of Welding Fittings are covered by ANSI B16.9. “Steel Butt-Welding Fittings.”
90˚ Long Radius Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/2" to 48" incl.
45˚ Long Radius Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/2" to 48" incl.
90˚ Long Radius Reducing Elbows . . . . . . . . . . . . . . . . . . . . . 2" to 24" incl.
Tees, Straight and Reducing Outlets . . . . . . . . . . . . . . . . . . . 1/2" to 48" incl.
Crosses, Straight and Reducing Outlets . . . . . . . . . . . . . . . . 1/2" to 48" incl.
Welding Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/2" to 48" incl.
Lap-Joint Stub Ends . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/2" to 24" incl.
Welding Reducers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3/4" to 48" incl.
Long Radius Return Bends . . . . . . . . . . . . . . . . . . . . . . . . . . 1/2" to 24" incl.
INFORMATION contained in this catalogue, we do not accept responsibility for the
consequences of any errors, nor for the effects of any subsequent
changes made by the various sources of data.
17 de 17
SWF