TL-2 Machine Layout Drawing 3-1/2” (89 mm) 4X Leveling Pad Pin Dimension 1 2 Electrical Connection Air Connection Door Open 36" (914 mm) 41" (1041 mm) 3" (76 mm) 123" (3124 mm) 1 5" (127 mm) 2 4" (102 mm) 1" (25 mm) 103" (2616 mm) 54" (1372 mm) 20 Gallon (76L) Coolant Tank 19" x 54" (483 mm x 1372 mm) 55" (1397 mm) Door Opening 104" (2642 mm) 2 79" (2007 mm) 61" (1549 mm) 43" (1092 mm) 1 19" (483 mm) 48.5" (1232 mm) 28" (711 mm) 56" (1422 mm) MLD-TL-2 Rev E Page 1 of 3 July, 2016 Haas Technical Publications Note: Drawing is formatted for 11” x 17” Drawing will print to 8.5” x 11” TL-2 Machine Layout Drawing C L 14" (356 mm) 6" (152 mm) 21" (533 mm) 10" (254 mm) C L 10" (254 mm) 5.5" (140 mm) TL-2 Enclosure Work Space (Right Side) Ø8.0" (203 mm) Without tool in turret Ø16.0" (406 mm) Ø7.1" (180 mm) With a boring bar holder installed Max turning diameter with 4-station automatic tool turret Max turning diameter with 3/4" (20 mm) tool post #4 Morse Taper 14.00" (356 mm) 0.75" (19 mm) CL 5.50"” (140 mm) 13.25" (337 mm) 4.0" (102 mm) 48.0" (1219 mm) 9.50" (241 mm) TL-2 Enclosure Work Space (Top View) MLD-TL-2 Rev E Page 2 of 3 July, 2016 Haas Technical Publications Note: Drawing is formatted for 11” x 17” Drawing will print to 8.5” x 11” TL-2 Machine Layout Drawing 5X 10-32 0.380" (9.65 mm) .750" (19.10 mm) .875" (22.23 mm) 0.375" (9.53 mm) 2.310" (58.67 mm) 9.940" (252.48 mm) 4.000" (101.6 mm) 4X 1.750" (44.45 mm) 9X 5/8-11 Thru 2X 0.250" (6.35 mm) 1.910" (48.51 mm) 4.921" (124.99 mm) 14.750" (374.65 mm) 4.000" (101.60 mm) 14.000" (355.60 mm) 4.000" (101.60 mm) 2.935" (74.55 mm) 4.750" (120.65 mm) 1.125" (28.58 mm) TL-2 Cross Slide Dimensions MLD-TL-2 Rev D Page 3 of 3 July, 2016 Haas Technical Publications Note: Drawing is formatted for 11” x 17” Drawing will print to 8.5” x 11”