ORDER NO.CHM0503005CE B12 Portable DVD/CD PLAYER DVD-LS90PP DVD-LS93P RAE1905Z-2C Mechanism Series Colour (S).................Silver Type Specifications Operating temperature range: +5 to +35°C (+41 to +95°F) Discs played [8cm (3”) or 12cm (5”)]: DVD (DVD-Video) DVD-RAM (DVD-VR, JPEG(*1, 5)) Operating humidity range: 5-85% RH (no condensation) DVD-R (DVD-Video) Region number: Region No.1 DVD-RW (DVD-Video, DVD-VR) +R/RW (Video) CD, CD-R/RW [CD-DA, Video-CD, SVCD(*1), MP3(*2, 5), WMA(*3, 5), JPEG (*4, 5), HighMAT Level 2 (Audio and Image)] *1: Conforming to IEC62107 *2: Compatible compression rate: between 32 kbps and 320 kbps *3: Compatible compression rate: between 48 kbps and 320 kbps *4: Exif Ver 2.1 JPEG Baseline files Picture resolution: between 320×240 and 6144×4096 pixels (sub sampling is 4:2:2 or 4:2:0) *5: The total combined maximum number of recognizalbe audio and picture contents and groups: 4000 audio and picture contents and 400 groups. Signal system: NTSC LCD screen: 9” -Si, TFT wide-screen LCD Composite-video output: © 2005 Matsushita Electric Industrial Co., Ltd. All rights reserved. Unauthorized copying and distribution is a violation of law. DVD-LS90PP / DVD-LS93P Output level: 1Vp-p (75W) Voltage: 7.2V Output terminal: Mini-jack Capacity: 8600mAh Number of terminals: 1system Dimensions (excluding protrusions and battery): Output level: 1.5Vrms (1kHz, 0dB, 10kW) DVD-LS90: Output terminal: Stereo mini-jack [99/32” (W) x 71/32” (D) x 117/32” (H)] Number of terminals: 1system *29.9mm (13/16”) at lowest point Audio output: [D=184.9mm (79/32”) including battery] Audio performance: [H=51.4mm (21/32”) including battery] (1) Frequency response: lDVD (linear audio): lCD audio: DVD-LS93: 4Hz-22kHz (48kHz sampling) [99/32” (W) x 71/32” (D) x 117/32” (H)] 4Hz-20kHz *29.9mm (13/16”) at lowest point [D=201.4mm (715/16”) including battery] 115dB [H=51.5mm (21/32”) including battery] (3) Dynamic range: lDVD (linear audio): 98dB lCD audio: 97dB Mass (including battery): (4) Total harmonic distortion: lCD audio: 235.4(W) x 178.6(D) x 39.0*(H) mm 4Hz-44kHz (96kHz sampling) (2) S/N ratio: lCD audio: 235.4(W) x 178.6(D) x 39.0*(H) mm Number of terminals: 1system 1280g (45.15 oz) This model uses lead free solder (PbF). Digital audio output: Mini optical terminal 1097g (38.69 oz) DVD-LS93: solder: 0.008% Optical digital output: DVD-LS90: Note Specifications are subject to change without notice. Mass and dimensions are approximate. (also used for audio output) Pickup: Manufactured under license from Dolby Laboratories. Wave length: 662nm/ 785nm (DVD/CD) Laser power: CLASS 2/ CLASS 3A (DVD/CD) “Dolby“ and the double-D symbol are trademarks of Dolby Laboratories. DC 12V (DC IN terminal) / “DTS“ and “DTS 2.0+ Digital Out” are trademarks of Digital Theater Systems, Inc. Power supply: DC 7.2V (Exclusive battery terminal) Power consumption Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216, and 4,819,098, licensed for limited viewing uses only. 13W (Unit only: 10W) This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. (Using included AC adaptor): Power consumption in Standby mode approx. 0.5W (Using included AC adaptor): Power consumption in Recharge mode 13W (Using included AC adaptor): Windows Media, and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries. AC adaptor: Power source: AC 100-240V, 50/60Hz Power consumption: 28W DC output: 12V, 1.5A WMA is a compression format developed by Microsoft Corporation. It achieves the same sound quality as MP3 with a file size that is smaller than that of MP3. Battery pack CGR-H702 (lithium ion)(LS-90 included): Voltage: 7.2V Capacity: 4700mAh MPEG Layer-3 audio decoding technology licensed from Fraunhofer llS and Thomson multimedia. HighMAT™ and the HighMAT logo are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. Battery pack CGR-H703 (lithium ion)(LS-93 included): 2 DVD-LS90PP / DVD-LS93P CONTENTS Page 1 SAFETY PRECAUTIONS 1.1. GENERAL GUIDELINES Page 4 12 Abbreviations 30 4 13 VOLTAGE CHART 32 2 PREVENTION OF ELECTRO STATIC DISCHARGE (ESD) TO ELECTROSTATICALLY SENSITIVE (ES) DEVICES 4 13.1. MAIN P.C.B. 32 13.2. INVERTER P.C.B. 35 3 PRECAUTION OF LASER DIODE 5 4 HOW TO REPLACE THE LITHIUM BATTERY 6 14.1. OVERALL BLOCK DIAGRAM 37 5 LITHIUM ION BATTERY 6 14.2. POWER SUPPLY BLOCK DIAGRAM 38 6 ABOUT LEAD FREE SOLDER (PbF) 6 14.3. SERVO BLOCK DIAGRAM 39 7 HANDLING PRECAUTIONS FOR TRAVERSE DECK 14 BLOCK DIAGRAM 37 7 14.4. AUDIO BLOCK DIAGRAM 40 7.1. Handling of optical pickup 7 14.5. VIDEO BLOCK DIAGRAM 41 7.2. Grounding for electrostatic breakdown prevention 7 8 DISASSEMBLY, REASSEMBLY AND SERVICE POSITION 8 8.1. Disassembly DIAGRAM NOTES 9 8.2. P.C.B. location 10 8.3. Main cabinet of the unit 10 8.4. Traverse assembly 11 8.5. Optical pick-up unit 12 8.6. Disc motor 12 8.7. Main P.C.B. 13 8.8. Operation P.C.B. 13 8.9. Monitor assembly 13 8.10. Disc cover 14 8.11. Monitor cover 14 8.12. Mono arm 15 8.13. Inverter P.C.B. 16 8.14. LCD panel 16 8.15. Service position 17 9 SELF-DIAGNOSIS FUNCTION AND SERVICE MODE 15 INTERCONNECTION SCHEMATIC DIAGRAM & SCHEMATIC 18 9.2. UHF displays 19 9.3. Service Mode Table 1 20 9.4. DVD Self Diagnostic Function-Error Code 20 9.5. Last Error Code saved during NO PLAY 21 9.6. Service mode table 22 9.7. Lens cleaning 23 10 SERVICE PRECAUTIONS 24 43 15.2. SCHEMATIC DIAGRAM NOTES 44 16 SCHEMATIC DIAGRAM 45 16.1. CHARGE BATTERY SECTION (MAIN P.C.B. (1/9)) SCHEMATIC DIAGRAM 45 16.2. POWER SUPPLY SECTION (MAIN P.C.B. (2/9)) SCHEMATIC DIAGRAM 46 16.3. SERVO SECTION (MAIN P.C.B. (3/9)) SCHEMATIC DIAGRAM 47 16.4. OPTICAL PICK UP SECTION (MAIN P.C.B. (4/9)) SCHEMATIC DIAGRAM 48 16.5. DV2 SECTION (MAIN P.C.B. (5/9)) SCHEMATIC DIAGRAM 49 16.6. VIDEO OUT SECTION (MAIN P.C.B. (6/9)) SCHEMATIC DIAGRAM 18 9.1. Optical Pickup Breakdown Diagnosis 43 15.1. INTERCONNECTION SCHEMATIC DIAGRAM 50 16.7. AUDIO OUT SECTION (MAIN P.C.B. (7/9)) SCHEMATIC DIAGRAM 51 16.8. OPERATION SECTION (MAIN P.C.B. (8/9)) SCHEMATIC DIAGRAM 52 16.9. LCD IF SECTION (MAIN P.C.B. (9/9)) SCHEMATIC DIAGRAM 53 16.10. OPERATION SECTION (OPERATION P.C.B.) SCHEMATIC DIAGRAM 16.11. INVERTER SECTION SCHEMATIC DIAGARAM 55 10.1. Recovery after the dvd player is repaired 24 10.2. Firmware version-up of the DVD player 24 17.1. MAIN P.C.B. (1/2) (COMPONENT SIDE) 57 25 17.2. MAIN P.C.B. (2/2) (FOIL SIDE) 58 11.1. Service Tools and Equipment 25 17.3. OPERATION & INVERTER P.C.B. 59 11.2. Important points in adjustment 25 11.3. Storing and Handling Test Discs 25 18.1. Casing Parts & Mechanism Section Exploded View 61 11.4. Optical adjustment 26 18.2. Mechanism Section Exploded View 62 11.5. Electrical adjustment (LCD) 28 18.3. Packing & Accessories Exploded View 63 11.6. Electrical check (Video output check) 29 11 ADJUSTMENT PROCEDURES 17 CIRCUIT BOARD ASSEMBLY 54 18 EXPLODED VIEWS 19 REPLACEMENT PARTS LIST 3 57 61 64 DVD-LS90PP / DVD-LS93P 1 SAFETY PRECAUTIONS 1.1. GENERAL GUIDELINES 1. When servicing, observe the original lead dress. If a short circuit is found, replace all parts which have been overheated or damaged by the short circuit. 2. After servicing, see to it that all the protective devices such as insulation barriers, insulation papers shields are properly installed. 3. After servicing, make the following leakage current checks to prevent the customer from being exposed to shock hazards. 1.1.1. LEAKAGE CURRENT COLD CHECK 1. Unplug the AC cord and connect a jumper between the two prongs on the plug. 2. Measure the resistance value, with an ohmmeter, between the jumpered AC plug and each exposed metallic cabinet part on the equipment such as screwheads, connectors, control shafts, etc. When the exposed metallic part has a return path to the chassis, the reading should be between 1MW and 5.2MW. When the exposed metal does not have a return path to the chassis, the reading must be . 1.1.2. 3. Use an AC voltmeter, with 1000 ohms/volt or more sensitivity, to measure the potential across the resistor. 4. Check each exposed metallic part, and measure the voltage at each point. LEAKAGE CURRENT HOT CHECK 5. Reverse the AC plug in the AC outlet and repeat each of the above measurements. 1. Plug the AC cord directly into the AC outlet. Do not use an isolation transformer for this check. 6. The potential at any point should not exceed 0.75 volts RMS. A leakage current tester (Simpson Model 229 or equivalent) may be used to make the hot checks, leakage current must not exceed 1/2 milliamp. In case a measurement is outside of the limits specified, there is a possibility of a shock hazard, and the equipment should be repaired and rechecked before it is returned to the customer. 2. Connect a 1.5kW, 10 watts resistor, in parallel with a 0.15µF capacitors, between each exposed metallic part on the set and a good earth ground such as a water pipe. 2 PREVENTION OF ELECTRO STATIC DISCHARGE (ESD) TO ELECTROSTATICALLY SENSITIVE (ES) DEVICES Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Electrostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and semiconductor "chip" components. The following techniques should be used to help reduce the incidence of component damage caused by electro static discharge (ESD). 1. Immediately before handling any semiconductor component or semiconductor-equipped assembly, drain off any ESD on your body by touching a known earth ground. Alternatively, obtain and wear a commercially available discharging ESD wrist strap, which should be removed for potential shock reasons prior to applying power to the unit under test. 2. After removing an electrical assembly equipped with ES devices, place the assembly on a conductive surface such as alminum foil, to prevent electrostatic charge buildup or exposure of the assembly. 3. Use only a grounded-tip soldering iron to solder or unsolder ES devices. 4. Use only an anti-static solder removal device. Some solder removal devices not classified as "anti-static (ESD protected)" can generate electrical charge sufficient to damage ES devices. 5. Do not use freon-propelled chemicals. These can generate electrical charges sufficient to damage ES devices. 6. Do not remove a replacement ES device from its protective package until immediately before you are ready to install it. (Most replacement ES devices are packaged with leads electrically shorted together by conductive foam, alminum foil or comparable conductive material). 7. Immediately before removing the protective material from the leads of a replacement ES device, touch the protective material to the chassis or circuit assembly into which the device will be installed. Caution Be sure no power is applied to the chassis or circuit, and observe all other safety precautions. 4 DVD-LS90PP / DVD-LS93P 8. Minimize bodily motions when handling unpackaged replacement ES devices. (Otherwise hamless motion such as the brushing together of your clothes fabric or the lifting of your foot from a carpeted floor can generate static electricity (ESD) sufficient to damage an ES device). 3 PRECAUTION OF LASER DIODE 5 DVD-LS90PP / DVD-LS93P 4 HOW TO REPLACE THE LITHIUM BATTERY This model is using a lithium battery for the remote control ass’y. NOTE: The lithium battery is a critical component. ( Type No.: CR2025 Manufactured by Panasonic. ) It must never be subjected to excessive heat or discharge. It must therefore only be fitted in equipment designed specifically for its use. Replacement batteries must be of the same type and manufacture. They must be fitted in the same manner and location as the original battery, with the correct polarity contacts observed. Do not attempt to re-charge the old battery or re-use it for any other purpose. It should be disposed of in waste products destined for burial rather than incineration. 5 LITHIUM ION BATTERY 6 ABOUT LEAD FREE SOLDER (PbF) Distinction of PbF PCB: PCBs (manufactured) using lead free solder will have a PbF stamp on the PCB. Caution: · Pb free solder has a higher melting point than standard solder; Typically thmelting point is 50 - 70°F (30 - 40°C) higher. Please use a high temperature soldering iron. In case of the soldering iron with temperature control, please set it to 700 ± 20°F (370 ± 10°C). · Pb free solder will tend to splash when heated too high (about 1100°F/ 600°C). When soldering or unsoldering, please completely remove all of the solder on the pins or solder area, and be sure to heat the soldering points with the Pb free solder until it melts enough. 6 DVD-LS90PP / DVD-LS93P 7 HANDLING PRECAUTIONS FOR TRAVERSE DECK It has already been adjusted. The laser diode in the optical pickup may break down due to potential difference caused by static electricity of clothes or human body. So be careful of electrostatic break down during repair of the optical pickup. 7.1. Handling of optical pickup 1. Do not subject the optical pickup to static electricity as it is extremely sensitive to electrical shock. 2. To prevent the breakdown of the laser diode, an antistatic shorting pin is inserted into the flexible board (FPC Board). When removing or connecting the short pin, finish the job in as short times as possible. 3. Be careful not to apply excessive stress to the flexible board (FPC Board). 4. Do not turn the variable resistor (Laser power adjustment). 7.2. Grounding for electrostatic breakdown prevention 1. Human body grounding Use the antistatic wrist strap to discharge the static electricity from your body. 2. Work table grounding Put a conductive material (sheet) or steel sheet on the area where the optical pickup is placed and ground the sheet. Caution The static electricity of your clothes will not be grounded through the wrist strap. So take care not to let your clothes touch the optical pickup. 7 DVD-LS90PP / DVD-LS93P 8 DISASSEMBLY, REASSEMBLY AND SERVICE POSITION 8 DVD-LS90PP / DVD-LS93P 8.1. Disassembly 9 DVD-LS90PP / DVD-LS93P 8.2. P.C.B. location <Removing battery pack> Release the lock lever and remove the battery pack in the direction of the arrow. 1. Remove the 11 screws from the bottom of the unit. 8.3. Main cabinet of the unit 2. Release the latches and remove the bottom cabinet. 10 DVD-LS90PP / DVD-LS93P 8.4. 8.4.2. Traverse assembly Reinstalling traverse assembly 1. Reinstall the traverse assembly to the specified pin of the unit. 2. Reinstall the flexible cable of the optical pickpup unit and lock it securely. 8.4.1. 3. Remove the solder of each laser short land of the flexible cable. Removing traverse assembly Caution: 1. Solder the 2 laser short lands on the flexible cable. Remove the solders completely: otherwise the laser diode won’t emit light. 2. Unlock the connectors and remove the flexible cables. 4. Reinstall the spindle flexible cable as shown figure. 11 DVD-LS90PP / DVD-LS93P 8.5. 8.5.1. Optical pick-up unit 8.5.2. Reinstalling optical pick-up unit The optical pick-up unit is factory adjusted. Do not touch the adjustment screw. Removing optical pick-up unit 1. Reassemble the disassembled parts in the reverse order of disassembly. 2. When reinstalling the traverse assembly on the main unit after installing the optical pick-up unit, make sure to remove the solder from each of the two laser short lands on the flexible cable. Caution: · Remove the solders completely; otherwise the laser diode won´t emit light. · After replacing the optical pick-up unit, check the quality of images played back and make optical adjustment. 8.6. Disc motor 8.6.1. Removing disc motor 1. Remove the adjustment screws A, B, and C. 2. Remove the disc motor. Make sure that the traverse assembly removed before trying to remove the optical pick-up unit. When removing the traverse assembly, solder the two laser short lands on the flexible cable of the optical pick-up unit. 1. Remove the two screws securing the main shaft retainer. 2. Remove the main shaft retainer. 3. Slide the main shaft in the direction indicated by the arrow to remove the optical pick-up unit. 8.6.2. Caution to be taken when replacing the disc motor 1. The mounting screws of the disc motor also serve as adjustment screws. When reinstalling the disc motor, first turn the screws A, B, and C as far as they go by usual force to secure them (do not overtighten). 2. Back off the adjustment screws A and C two complete turns and secure them. 3. Back off the adjustment screw B one and a half turns and secure them. · This makes it nearly possible to play back disks and adjust the jitter. Thereafter, adjust the adjustment screws C and A as indicated. 12 DVD-LS90PP / DVD-LS93P 8.7. Main P.C.B. 8.9. Monitor assembly 1. Unlock the connector and remove the flexible cable. 2. Remove the 3 connectors. 3. Remove the 4 screws and remove the main P.C.B.. 1. Unlock the connector and remove the flexible cable. 2. Remove the 2 screws. 8.8. Operation P.C.B. 1. Remove the connector. 2. Remove the 2 screws and remove the operation P.C.B. 3. Release the latches and remove the hinge cover. 4. Remove the screw and remove the monitor assembly. 13 DVD-LS90PP / DVD-LS93P 8.11. Monitor cover <Caution to be taken when installing monitor assembly> 1. Roll the flexible cable as shown figure. 1. Remove the 5 screws 2. Install the monitor assembly on the cabinet. 2. Remove the monitor cover into the direction of the arrow. 3. Unlock the connector and remove the flexible cable. 8.10. Disc cover 1. Remove the disc cover in order of (a) and (b). Caution: Please don’t lose the spring <Caution to be taken when installing monitor cover> Please do not nip the wire. 14 DVD-LS90PP / DVD-LS93P 8.12. Mono arm 5. Release the latches and remove the mono arm 1. Remove the 2 screws. 2. Release the latches and remove the shaft covers. 3. Release the friction hinge from boss and remove the mono arm assembly. 6. Remove the plate. 4. Remove the 6 screws. 15 DVD-LS90PP / DVD-LS93P 8.13. Inverter P.C.B. <Caution to be taken when installing mono arm> 1. Roll the flexible cables as shown figure and install it to mono arm cover. 1. Unlock the connector and remove the flexible cable. 2. Remove the connector and remove the inverter P.C.B. 8.14. LCD panel 1. Remove the LCD panel into the direction of the arrow. 2. Install mono arm. 3. Roll 3 turns of the flexible cable and Install the shaft cover (R) to flexible cable. 4. Pass the flexible cable and the friction hinge into the holes in the monitor cover. 5. Install the shaft covers to monitor cover. 16 DVD-LS90PP / DVD-LS93P 8.15. Service position 8.15.1. Board checks 1. Connect the main P.C.B and the traverse assembly with an extension cable. 2. Install the traverse assembly to the tilt adjustment jig using three screws and three washers. Caution: · Remove the rubber cushion from the traverse assembly to prevent it from getting damaged. 3. Install a dick on the traverse assembly. Caution: · Make sure the disk is securely installed on the disk motor. 4. Remove the main P.C.B., operation P.C.B., inverter P.C.B., and LCD panel as shown below. 5. The disk cannot be played back with the disk cover removed. Press and hold down the S5201 and S5202. (Secure with cellulose tape.) 17 DVD-LS90PP / DVD-LS93P 9 SELF-DIAGNOSIS FUNCTION AND SERVICE MODE 9.1. Optical Pickup Breakdown Diagnosis As a new feature, this unit has an “optical pick-up problem diagnosis function” and “a tilt adjustment confirmation function” built in. Use the following procedure to efficiently determine the problem and adjust tilt.If "NO DISC" is displayed, before exchanging the optical pick-up, carry out problem diagnosis first. If the present laser driving current is over 55, the optical pick-up may need to be exchanged. Note: Carry out diagnosis within 3 minutes of turning the unit on. (The player’s current can increase as it warms up, so turn the unit off and allow it to cool down before diagnosis.) 18 DVD-LS90PP / DVD-LS93P Cautions to be taken when replacing the optical pickup for short-circuiting or removing the laser diode. (Recommended soldering iron) HAKKO ESD Product The optical pickup may break down due to the static electricity of human body. Take proper protection measures against static electricity before repairing the parts around the optical pickup. (See the page describing the PREVENTION OF STATIC ELECTRICITY DISCHARGE.) 4. Solder the land of the flexible cable in the optical pickup. Note: · When using a soldering iron which is not destaticized, short-circuit the terminal face of the flexible case with a clip. After that, short-circuit the land. 1. Do not touch the areas around the laser diode and actuator. 2. Do not judge the laser diode with a tester. (The tester will be damaged easily.) · After the repairing work is completed, remove the solder according to the correct procedure shown in this Technical Guide. 3. It is recommended to use a destaticized soldering iron 9.2. UHF displays Use the internal service mode for evaluation of malfunctions. Display Method Items displayed when in use Display CHECK THE Focus error DISC H01 Inner cover trouble H02 Spindle servo error H03 Traverse error H04 Tracking servo error H05 Seek error F0** Disc format error Press the "0" button on the remote control while holding F1** Disc code error down the PAUSE and PLAY buttons on the player. F2** Decoder LSI error The last error code generated is saved in the EEPROM F5** DSC F6** ECC error F7** Microcomputer error F8** Microcomputer error 19 Diagnosis DVD-LS90PP / DVD-LS93P 9.3. Service Mode Table 1 The service modes can be activated by pressing various button combination on the player and remote control unit. Player buttons PAUSE + PLAY Remote control unit buttons 0 5 6 7 9 DISPLAY PAUSE PAUSE BWD-SKIP PLAY 9.4. H07 Note Refer to section 9.2. SelfDiagnosis Function (UHF Display). Jitter check, tilt adjustment Refer to section 11.4. *Display shows xx_yyyzz Optical Pickup Tilt "xx" and "zz" shown to the right have nothing to do with the jitter Adjustment value. "xx" is the error counter, while "zz" is the focus drive value. Refer to section 11.4. for Optical Pickup Tilt Adjustment Procedure. Checking the region numbers and broadcast system Checking the program version Check the IC6301 FLASH ROM program. Lighting Confirmation Function of Display Tube Checking the laser drive current Refer to section 8.5. Optical Pickup Replacement Procedure. Writing the laser drive current value after replacing the optical pickup (do not use for anything other than optical pickup replacement) The user setting is returned to the state of the factory shipment. Refer to section 9.6. Initializing the DVD player. DVD Self Diagnostic Function-Error Code Error Code U11 H01 H02 H03 H04 H05 H06 — Application Displaying the UHF display F_ _ _ Error Content U, H error Focus error Tray loading error Spindle servo error Traverse servo error Tracking servo error Seek error Power error F500 Spindle motor error DSC related DSC error F501 DSC not Ready Additional error explanation Defect 1 Defect 2 Defect 3 Defect 4 OPU DV2 (IC3001) DV2 (IC3001) DV2 (IC3001) DV2 (IC3001) DV2 (IC3001) DV2 (IC3001) DV2 (IC3001) servo drive DV2 (IC3001) EEPROM (IC6351) DV2 (IC3001) DV2 (IC3001) servo drive (Spindle servo, DSC SP motor, CLV servo error) Cannot switch off the power because of the panel and system computer communication error drive F502 DSC Time out error DSC stops in the occurence of servo error (starup, focus error, etc) DSC-system computer communication error (Communication failure caused by idling of DSC) Similar disposal as F500 DV2 (IC3001) OPU F503 F505 DSC communication Communication error (result error occured Failure although communication command was sent) DSC Attention error Similar disposal as F500 DV2 (IC3001) OPU F506 Invalid media F600 F601 F602 F603 F610 F611 Disc is flipped incompatible disc ODC related Access failure to management information caused by demodulation error Indeterminate sector ID requested Access failure to LEADIN caused by demodulation error Access failure to KEYDET caused by demodulation error ODC abnormality 6626 QCODE read Error over, TOC unreadable, DISC Operation stopped because navigation data is not accessible caused by the demodulation defect DV2 (IC3001) DV2 (IC3001) DV2 (IC3001) Operation stopped caused by the request to access abnormal ID data LEAD IN data unreadable DV2 (IC3001) DV2 (IC3001) DV2 (IC3001) Access failure to CSS data of disc No permission for command execution don’t Access failure to seek address in CD series 20 DV2 (IC3001) DV2 (IC3001) servo drive DV2 (IC3001) DVD-LS90PP / DVD-LS93P Error Code F612 F630 F631 F632 F103 Error Content No CRC OK for a specific time No reply to KEY DET enquiry CPPM KEY DET is not available till the FILE terminal CPPM KEY DET is not available Disc code Illegal highlight Position Additional error explanation Access failure to ID data in DVD series Defect 1 DV2 (IC3001) Defect 2 (CPPM file system is unreadable caused by scratches) DISC CPPM Been revoked or falsified DISC EEPROM (IC6351) CPPM (*1) Big possibility of disc specification violation during highlight display DISC EEPROM (IC6351) DV2 (IC3001) DV2 (IC3001) FROM (IC6301) EEPROM (IC6351) DV2 (IC3001) Serial communicat ion on lone F893 F894 EEPROM abnormality F895 Language area Firm version agreement check for factory preset abnormality setting failure prevention No existence model Firm version agreement check for factory preset setting failure prevention Initialize is not Initialize completion check for factory preset completed setting failure prevention Message command is Begin sending message to AV task not appropriate F700 F701 F702 F880 F890 F891 F896 F897 F8A0 When replying message to disc manager Next message is sent before replying to disc manager Message is changed before it is sent as a reply to disc manager Message coming from a non-existing task Sending message to AV task Begin sending message to AV task FROM (IC6301) FROM (IC6301) Note: An error code will be canceled if a power supply is turned OFF. *1: CPPM is the copy guard function beforehand written in the disc for protection of copyrights. 9.5. Last Error Code saved during NO PLAY Error code F0BF F0C0 F0C1 F0C2 F0C3 F0C4 F0C5 Defect 4 (for internal use only) HIC Error Force initialize failure (time out) Micro computer error MBX overflow Message command does not end Message command changes Task number is not appropriate Sending message when message is being sent to AV task Message couldn’t be sent to AV task FROM falsification F4FF Defect 3 Error Content 6) Cannot playback because physical layer is not recoginizable 8) DVD: Cannot playback because it is not DVD Video/Adio/VR 9) DVD: Prohibited by the restricted region code A) DVD: PAL restricted playback B) DVD: Parental lock setting prohibits the playback of the entire title C) VCD: Prohibited because it is in PHOTO CD fromat VCD/CD: Prohibited because it is CDROM without CD-DA 21 DV2 (IC3001) DVD-LS90PP / DVD-LS93P 9.6. Service mode table Pressing various button combinations on the player and remote control unit can activate the service modes. 22 DVD-LS90PP / DVD-LS93P 9.7. Lens cleaning When cleaning the lens, use the lens cleaner which product part No. SZZP1038C. 23 DVD-LS90PP / DVD-LS93P 10 SERVICE PRECAUTIONS 10.1. Recovery after the dvd player is repaired · When FROM or main P.C.B. is replaced, carry out the recovery processing to optimize the drive. Playback the recovery disk to process the recovery automatically. · Recovery disc (Product number: RFKZD03R004) · Performing recovery 1. Load the recovery disc RFKZD03R004 on to the player and run it. 2. Recovery is performed automatically. When it is finished, a message appears on the screen. 3. Remove the recovery disc. 4. Turn off the power. Note: This unit requires no initialization process carried out after the traditional DVD players were repaired. When the recovery measures are taken, the customer setting will return to the factory setting as same as the procedure described in item of "Initialization" in 9.6. is carried out. Write down the contents of the setting before recovery processing, and reset the player. 10.2. Firmware version-up of the DVD player · The firmware of the DVD player may be renewed to improve the quality including operationability and playerbility to the substandard discs.processing to optimize the drive. The recovery disc has also firmware version-up. · After version-up, recovery processing is executed automatically. · Part number of the recovery disc for version-up will be noticed when it is supplied. · Updating firmware 1. Load the recovery disc that is supplied to the player and run it. 2. Firmware version of the player is automatically checked. Appropriate message appears whenever necessary. 3. Using remote controller´s cursor key, select whether version updating is to be done or not. (Selection of Yes/No) 4. a. If Yes is selected, version updating is performed. b. If No is selected, only recovery is performed. 5. a. When updating is finished, remove the disc according to the message appearing on the screen. b. Remove the disc according to the message appearing on the screen. 6. Turn off the power. Note: If the AC power supply is shut out during version-up due to a power failure, the version-up is improperly carried out. In such a case, replace the FROM and carry out the version-up again. 24 DVD-LS90PP / DVD-LS93P 11 ADJUSTMENT PROCEDURES <Caution> Be sure to take static electricity countermeasures before adjusting the optical system. Adjust the optical systems according to the prescribed procedure. 11.1. Service Tools and Equipment Application Tilt adjustment Inspection Others Confirmation Name DVD test disc Extension cable (Traverse ass’y to main P.C.B.) Extension cable (Traverse ass’y to main P.C.B.) Tilt adj. jig Screw lock Grease Lubricating oil CD test disc Number DVDT-S15 or DVDT-S01 RFKZ0104 (30Pin) RFKZ0303 (18Pin) RFKZ0118 RZZ0L01 JGS0101 RFKXGUD24 PVCD-K06 or any other commercially available disc PVCD-K06 or any other commercially available disc RFKZD03R004 VCD test disc Recovery disc 11.2. Important points in adjustment 11.2.1. Important points in optical adjustment · Optical pickup tilt adjustment is needed after replacement of the following components. 1. Optical pickup unit 2. Disc motor 3. Traverse motor 4. Optical pickup peripheral parts (such as rail) Notes Adjustment is generally unnecessary after replacing other parts of the traverse unit. However, make adjustment if there is a noticeable degradation in picture quality. Optical adjustments cannot be made inside the optical pickup. 11.2.2. Important points in electrical adjustment · Follow the adjustment procedures described in this Manual. 11.3. Storing and Handling Test Discs · Surface precision is vital for DVD test discs. Be sure to store and handle them carefully. 1. Do not place discs directly onto the workbench, etc., after use. 2. Handle discs carefully in order to maintain their flatness. Place them into their case after use and store them vertically. Store discs in a cool place where they are not exposed to direct sunlight or air from air conditioners. 3. Accurate adjustment will not be possible if the disc is warped when placed on a surface made of glass, etc. If this happens, use a new test disc to make optical adjustments. 4. If adjustment is done using a warped disc, the adjustment will be incorrect and some discs will not be playable. 25 DVD-LS90PP / DVD-LS93P 11.4. Optical adjustment 11.4.1. Optical pick gate adjustment Measurement point ----- Adjustment point Tangential adjustment screw (Adjustment screw A) Radial tilt adjustment screw (Adjustment screw B) Mode Tracking servo "ON" Disc DVDT-S01/S15 Tracking servo "ON" Measuring apparatus None (Use the service indication on the main unit) Adjustment value Adjust the jitter value to the minimum level. Remove the solder shorts before trying to make the adjustment. 11.4.1.1. Preparations 1. Connect the main P.C.B. to the traverse ass’y with the extension cable. 2. Install the traverse ass’y to the tilt adjustment jig with three screws and three washers. Caution Remove the rubber cushion of the traverse ass’y. 3. Install the traverse ass’y to the disc. Caution Make sure the disc is installed on the disc motor securely. 4. Disassemble the Main P.C.B., Operation P.C.B., Inverter P.C.B. and LCD panel as shown in figure below. 5. The disc cannot be played back with the Disc cover attached. Press and hold down the S5201 and S5202 (Secure with cellulose tape) 26 DVD-LS90PP / DVD-LS93P 11.4.1.2. Adjustment 1. Play back the disc (DVDT-S01/S15) and make sure the RF signal is outputted. 2. Play back the areas within a radius of 40 ± 1 mm of the disc (middle circumference). 3. Turn the adjustment screw C to minimize the jitter value in the radial direction. (*Once turn the screw to the full position and then back off. You should finish tightening in the tightening direction.) 4. Turn the adjustment screw A to minimize the jitter value in the tangential direction. (*Once turn the screw to the full position and then back off. You should finish tightening in the tightening direction.) 5. DISC height measurement (Measure the middle of the deflection of the disc and motor surface.) *If the measured height is out of range, adjust to the specified value using the adjustment screws A, B, and C (by the same angle). 11.4.1.3. Checking after adjustment Play back the test disc and ordinary discs to make sure that there is not any deterioration of image quality or missing of sound at the inner, middle, and outer circumferences. 27 DVD-LS90PP / DVD-LS93P 11.5. Electrical adjustment (LCD) 11.5.2. Adjusting DC offset of impressed voltage [How to enter into the LCD panel adjustment mode] Adjustment is required when Noise such as horizontal stripes is found on the screen. Adjustment procedure Play back the specified video signal (10 steps, color bas signal). Press and hold down "Back skip" and "Pause" of the main unit at the same time while pressing "Menu" on the remote control unit. Use “3” on remote control unit. [The DVD player is now in the FT02 mode] Press the "Forward skip button twice to enter into the FT04 mode (LCD panel adjustment mode). Details of adjustment Press “ “and” ”buttons on remote controller, set the right side number to “AI”. Press the "Playback" button to play back the signal which has been played back before stopping and then, press the "Pause (still) button. Adjustment UP DVD player/remote control unit Adjustment DOWN DVD player/remote control Input video signal 10step monochrome 11.5.3. Adjusting white balance red/subcontrast red [How to exit to normal mode] (Exit the F4 mode) Adjustment is required when Remarkable deviation in white balance is found Adjustment procedure 1. Turn off the primary power supply (Remove the DC power supply). Turn on the power supply. Press the "Stop" to stop the system. Use “6” on remote control unit. Press "Cancel" on the remote control unit (The Cancel key is enabled only when the system is stopped.) lWhenever the LCD panel is replaced, make the following checks and adjustments. Details of adjustment (White balance) “and “ “ buttons on Press “ remote controller, set the number of center to “80”. (Sub contrast) “ and “ “ buttons on Press “ remote controller, set the right side number to “7E”. lPress the "Enter" key and fix the settings. lWhen the EEPROM" (IC8401) of the Main P.C.B. is replaced, call up the LCD Panel adjustment mode (FT04) and execute the AUDIO on the remove control unit and then check the condition of the screen. Make adjustments as necessary. 11.5.1. Adjusting VCO oscillation frequency Check point TL8602 Adjustment UP DVD player/remote control unit Adjustment DOWN DVD player/remote control Input video signal 10step monochrome 11.5.4. Adjusting whitebalance blue/subcontrast blue Adjustment is required when Check point The synchronization of the LCD TP8201 screen is irregular after any VCOrelated circuit part is replaced Adjustment procedure Adjustment UP Adjustment DOWN Use “1” on remote control unit. DVD DVD player/remote player/remote control unit control Details of adjustment Press “ “ and ” ”buttons on remote controller, set the right side number to “71”. Check point TL8401 Adjustment is required when Remarkable deviation in white balance is found Adjustment procedure Use “7” on remote control unit. Check point TL8604 Adjustment UP DVD player/remote control unit Adjustment DOWN DVD player/remote control Input video signal Details of adjustment (White balance) “and “ “ buttons on Press “ remote controller, set the number of center to “71”. (Sub contrast) “and “ “ buttons on Press “ remote controller, set the right side number to “84”. ----- 28 Input video signal 10step monochrome DVD-LS90PP / DVD-LS93P 11.5.5. Adjusting amplitude of impressed voltage Adjustment is required when ----Adjustment procedure Use “2” on remote control unit. 11.5.9. Adjusting color Adjustment is required when ----Adjustment procedure Check point TL8401 Adjustment UP Adjustment DOWN DVD DVD player/remote player/remote control unit control Details of adjustment Press “ “ and “ “ buttons on remote controller, set the right side number to “15”. Use “5” on remote control unit. Details of adjustment Press “ “ and “ “ buttons on remote controller, set the right number to “81”. Input video signal 10step monochrome Use “4” on remote control unit. Check point TL8603 Adjustment UP Adjustment DOWN DVD DVD player/remote player/remote control unit control Details of adjustment Press “ “ and “ “ buttons on remote controller, set the number of center to “91”. 11.6.1. Checking video output (composite signal) Check point Video output terminal Measuring apparatus Oscilloscope Input video signal 10step monochrome Use “4” on remote control unit. 1. Terminate the composite signal of the video output terminal with 75 W and input into the oscilloscope. Check point TL8603 Adjustment UP Adjustment DOWN DVD DVD player/remote player/remote control unit control Details of adjustment Press “ “ and “ “ buttons on remote controller, set the right side number to “71”. 2. Select color bar 75% from the titles of the DVD test disc and play back. 3. Check that the composite signal output is the following value: Input video signal 10step monochrome 11.5.8. Adjusting TINT Adjustment is required when ----Adjustment procedure Use “5” on remote control unit. Details of adjustment Press “ “ and “ “ buttons on remote controller, set the number of center to “75”. Mode Disc Color bar DVDT-S20D playback (75%) Check value Y: 1000 mV ± 100 mV Cyan: 650 mV ± 100 mV Purpose: Keep the interchangeability of video signal output 11.5.7. Adjusting contrast Adjustment is required when ----Adjustment procedure Input video signal 75% color bar 11.6. Electrical check (Video output check) 11.5.6. Adjusting pedestal Adjustment is required when ----Adjustment procedure Check point TL8604 Adjustment UP Adjustment DOWN DVD DVD player/remote player/remote control unit control Check point TL8604 Adjustment UP Adjustment DOWN DVD DVD player/remote player/remote control unit control Input video signal 75% color bar 29 DVD-LS90PP / DVD-LS93P 12 Abbreviations INITIAL/LOGO A A0~UP ACLK AD0~UP ADATA ALE AMUTE AREQ ARF ASI ASO ASYNC B BCK BCKIN BDO BLKCK BOTTOM BYP BYTCK C CAV CBDO CD CDSCK CDSRDATA CDRF CDV CHNDATA CKSL CLV COFTR CPA CPCS CPDT CPH1~3 CPUADR CPUADT CPUIRQ CPRD CPV CPWR CS CSYNCIN CSYNCOUT D DACCK DEEMP DEMPH DIG0~UP DIN DMSRCK DMUTE DO DOUT0~UP DRF DRPOUT DREQ DRESP DSC DSLF DVD ABBREVIATIONS ADDRESS AUDIO CLOCK ADDRESS BUS AUDIO PES PACKET DATA ADDRESS LATCH ENABLE AUDIO MUTE AUDIO PES PACKET REQUEST AUDIO RF SERVO AMP INVERTED INPUT SERVO AMP OUTPUT AUDIO WORD DISTINCTION SYNC BIT CLOCK (PCM) BIT CLOCK INPUT BLACK DROP OUT SUB CODE BLOCK CLOCK CAP. FOR BOTTOM HOLD BYPATH BYTE CLOCK CONSTANT ANGULAR VELOCITY CAP. BLACK DROP OUT COMPACT DISC CD SERIAL DATA CLOCK CD SERIAL DATA CD RF (EFM) SIGNAL COMPACT DISC-VIDEO CHANNEL DATA SYSTEM CLOCK SELECT CONSTANT LINEAR VELOCITY CAP. OFF TRACK CPU ADDRESS CPU CHIP SELECT CPU DATA CLOCK PULSE SOURCE DRIVE CPU ADDRESS LATCH CPU ADDRESS DATA BUS CPU INTERRUPT REQUEST CPU READ ENABLE GATE DRIVER CLOCK PULSE CPU WRITE ENABLE CHIP SELECT COMPOSITE SYNC IN COMPOSITE SYNC OUT D/A CONVERTER CLOCK DEEMPHASIS BIT ON/OFF DEEMPHASIS SWITCHING FL DIGIT OUTPUT DATA INPUT DM SERIAL DATA READ CLOCK DIGITAL MUTE CONTROL DROP OUT DATA OUTPUT DATA SLICE RF (BIAS) DROP OUT SIGNAL DATA REQUEST DATA RESPONSE DIGITAL SERVO CONTROLLER DATA SLICE LOOP FILTER DIGITAL VIDEO DISC INITIAL/LOGO E EC ECR F G H I L M O P 30 ENCSEL ETMCLK ETSCLK FBAL FCLK FE FFI FEO FG FSC FSCK GND HA0~UP HD0~UP HINT HRXW IECOUT IPFRAG IREF ISEL LDON LPC LRCK MA0~UP MCK MCKI MCLK MDATA MDQ0~UP MDQM MLD MPEG ODC OEH OEV 1, 2 OFTR OSCI OSCO OSD P1~UP PCD PCK PDVD PEAK PLLCLK PLLOK PWMCTL PWMDA PWMOA, B ABBREVIATIONS ERROR TORQUE CONTROL ERROR TORQUE CONTROL REFERENCE ENCODER SELECT EXTERNAL M CLOCK (81MHz/40.5MHz) EXTERNAL S CLOCK (54MHz) FOCUS BALANCE FRAME CLOCK FOCUS ERROR FOCUS ERROR AMP INVERTED INPUT FOCUS ERROR AMP OUTPUT FREQUENCY GENERATOR FREQUENCY SUB CARRIER FS (384 OVER SAMPLING) CLOCK COMMON GROUNDING (EARTH) HOST ADDRESS HOST DATA HOST INTERRUPT HOST READ/WRITE IEC958 FORMAT DATA OUTPUT INTERPOLATION FLAG I (CURRENT) REFERENCE INTERFACE MODE SELECT LASER DIODE CONTROL LASER POWER CONTROL L CH/R CH DISTINCTION CLOCK MEMORY ADDRESS MEMORY CLOCK MEMORY CLOCK INPUT MEMORY SERIAL COMMAND CLOCK MEMORY SERIAL COMMAND DATA MEMORY DATA INPUT/OUTPUT MEMORY DATA I/O MASK MEMORY SERIAL COMMAND LOAD MOVING PICTURE EXPERTS GROUP OPTICAL DISC CONTROLLER SOURCE DRIVER OUTPUT ENABLE GATE DRIVER OUTPUT ENABLE OFF TRACKING OSCILLATOR INPUT OSCILLATOR OUTPUT ON SCREEN DISPLAY PORT CD TRACKING PHASE DIFFERENCE PLL CLOCK DVD TRACKING PHASE DIFFERENCE CAP. FOR PEAK HOLD CHANNEL PLL CLOCK PLL LOCK PWM OUTPUT CONTROL PULSE WAVE MOTOR DRIVE A PULSE WAVE MOTOR OUT A, B DVD-LS90PP / DVD-LS93P INITIAL/LOGO R RE RFENV RFO RS RSEL RST RSV S SBI0, 1 SBO0 SBT0, 1 SCK SCKR SCL SCLK SDA SEG0~UP SELCLK SEN SIN1, 2 SOUT1, 2 SPDI SPDO SPEN SPRCLK SPWCLK SQCK SQCX SRDATA SRMADR SRMDT0~7 SS STAT STCLK STD0~UP STENABLE STH STSEL STV STVALID SUBC SBCK SUBQ SYSCLK T TE TIBAL TID TIN TIP TIS TPSN TPSO TPSP TRCRS TRON TRSON ABBREVIATIONS READ ENABLE RF ENVELOPE RF PHASE DIFFERENCE OUTPUT (CD-ROM) REGISTER SELECT RF POLARITY SELECT RESET RESERVE SERIAL DATA INPUT SERIAL DATA OUTPUT SERIAL CLOCK SERIAL DATA CLOCK AUDIO SERIAL CLOCK RECEIVER SERIAL CLOCK SERIAL CLOCK SERIAL DATA FL SEGMENT OUTPUT SELECT CLOCK SERIAL PORT ENABLE SERIAL DATA IN SERIAL DATA OUT SERIAL PORT DATA INPUT SERIAL PORT DATA OUTPUT SERIAL PORT R/W ENABLE SERIAL PORT READ CLOCK SERIAL PORT WRITE CLOCK SUB CODE Q CLOCK SUB CODE Q DATA READ CLOCK SERIAL DATA SRAM ADDRESS BUS SRAM DATA BUS 0~7 START/STOP STATUS STREAM DATA CLOCK STREAM DATA STREAM DATA INPUT ENABLE SOURCE START PULSE STREAM DATA POLARITY SELECT GATE DRIVER SCAN START PULSE STREAM DATA VALIDITY SUB CODE SERIAL SUB CODE CLOCK SUB CODE Q DATA SYSTEM CLOCK TRACKING ERROR BALANCE CONTROL BALANCE OUTPUT 1 BALANCE INPUT BALANCE INPUT BALANCE OUTPUT 2 OP AMP INPUT OP AMP OUTPUT OP AMP INVERTED INPUT TRACK CROSS SIGNAL TRACKING ON TRAVERSE SERVO ON INITIAL/LOGO V VBLANK VCC VCDCONT W X 31 VDD VFB VREF VSS WAIT WDCK WEH WSR X XALE XAREQ XCDROM XCS XCSYNC XDS XHSYNCO XHINT XI XINT XMW XO XRE XSRMCE XSRMOE XSRMWE XVCS XVDS XVSYNCO ABBREVIATIONS V BLANKING COLLECTOR POWER SUPPLY VOLTAGE VIDEO CD CONTROL (TRACKING BALANCE) DRAIN POWER SUPPLY VOLTAGE VIDEO FEED BACK VOLTAGE REFERENCE SOURCE POWER SUPPLY VOLTAGE BUS CYCLE WAIT WORD CLOCK WRITE ENABLE HIGH WORD SELECT RECEIVER X´ TAL X ADDRESS LATCH ENABLE X AUDIO DATA REQUEST X CD ROM CHIP SELECT X CHIP SELECT X COMPOSITE SYNC X DATA STROBE X HORIZONTAL SYNC OUTPUT XH INTERRUPT REQUEST X´ TAL OSCILLATOR INPUT X INTERRUPT X MEMORY WRITE ENABLE X´ TAL OSCILLATOR OUTPUT X READ ENABLE X SRAM CHIP ENABLE X SRAM OUTPUT ENABLE X SRAM WRITE ENABLE X V-DEC CHIP SELECT X V-DEC CONTROL BUS STROBE X VERTICAL SYNC OUTPUT DVD-LS90PP / DVD-LS93P 13 VOLTAGE CHART Note: · Indicated voltage values are the standard values for the unit measured by the DC electronic circuit tester (high-impedance) with the chassis taken as standard. Therefore, there may exist some errors in the voltage values, depending on the internal impedance of the DC circuit tester. · Circuit voltage and waveform described herein shall be regarded as reference information when probing defect point, because it may differ from an actual measuring value due to difference of Measuring instrument and its measuring condition and product itself. 13.1. MAIN P.C.B. Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP 1 0.6 0.4 2 9.1 9.1 3 9.1 9.1 4 8.2 8.2 21 1.5 1.3 22 1.0 1.0 23 1.0 1.0 41 - 42 1.0 1.0 1 5.0 5.0 2 0 0 1 7.4 7.3 2 0 0 1 1.3 1.3 2 1.6 1.6 3 5.0 5.0 4 9.4 9.4 1 1.6 1.6 2 1.6 1.6 3 1.6 1.6 21 5.3 5.3 22 5.3 5.3 23 1.6 1.6 1 - 2 2.5 0.1 3 - 21 1.6 1.6 22 1.5 1.6 23 3.2 0 1 2.7 3.0 2 2.6 3.0 21 0 0 5 0 0 24 25 1.4 1.1 1.3 1.1 IC1001 43 44 45 0 0 5.0 0 0 5.0 IC1003 3 4 5 1.3 4.9 0 1.3 5.0 0 IC1401 3 4 5 1.2 11.8 1.2 11.7 6 0 0 7 6.3 6.3 8 9.1 9.1 9 3.6 3.6 26 1.9 1.9 27 1.0 1.0 28 1.7 1.7 29 0 0 46 5.0 5.0 47 5.0 5.0 48 0 0 6 5.3 5.3 1 5.3 5.3 2 0 0 6 8.0 0 7 0 8.0 5 4.6 4.6 6 0.3 0.3 7 1.0 1.0 4 5 1.6 1.6 1.6 1.6 IC2601 24 25 1.6 1.6 1.6 1.6 6 1.6 1.6 7 0 0 8 5.3 5.3 26 1.6 1.6 27 3.2 0 28 2.9 2.8 4 5 2.5 0.1 IC2651 24 25 2.5 5.0 5.0 5.0 6 - 7 2.5 0.1 8 0 0 26 0 0 27 5.3 5.3 28 5.2 5.3 3 0 0 4 2.6 3.0 5 2.6 3.1 6 3.2 3.2 7 2.6 2.9 8 2.6 3.0 9 0 0 22 3.2 3.2 23 2.2 2.8 24 1.4 1.4 25 0.9 0.6 26 1.1 1.1 27 0.8 0.5 28 3.2 3.2 29 0 0 41 1.2 0.8 42 2.2 2.9 43 0.4 0.4 44 1.1 1.1 45 1.3 2.1 46 2.6 2.7 47 1.0 0.7 48 3.2 3.2 49 0 0 61 0 0 62 3.2 3.2 63 0 0 64 0 0 65 3.2 0 66 2.9 3.0 67 0 0 68 2.9 2.9 69 2.6 2.7 81 0 0 82 0 0 83 0 0 84 3.2 3.2 85 0 0 86 3.2 3.2 87 0 0 88 0 0 89 1.1 1.1 101 2.3 2.3 102 2.0 2.0 103 1.8 1.8 104 0.1 0.1 105 0 0 106 1.7 1.7 107 3.2 3.2 108 2.0 2.0 109 2.0 2.0 121 0 1.4 122 0 0 123 0.7 0 124 1.1 0 125 0.3 0 126 0.5 0 127 1.6 2.2 128 1.6 1.6 129 2.6 2.2 IC1001 10 11 0 0 0 0 IC1001 30 31 0 0 - IC1004 3 5.3 5.3 4 - 1 5.0 5.0 2 0 0 8 11.7 11.8 IC1601 8 9 1.0 1.4 1.0 1.4 9 3.2 0 10 11 0.5 4.5 0.7 4.5 IC2601 10 11 0 2.8 0 2.7 9 2.9 5.0 IC2651 10 11 2.9 2.9 5.0 5.0 IC3001 10 11 2.7 2.7 3.1 3.0 IC3001 30 31 1.8 0.8 2.7 0.4 IC3001 50 51 2.3 2.3 2.6 2.5 IC3001 70 71 3.1 0.1 3.1 3.2 IC3001 90 91 0 0 0 0 IC3001 110 111 1.8 1.8 1.8 1.8 IC3001 130 131 2.6 2.5 2.2 2.2 32 12 0.2 0.2 13 2.2 2.2 14 1.8 1.8 15 1.1 1.0 16 1.4 1.3 17 1.0 1.0 18 1.0 1.0 19 2.1 2.1 20 1.1 1.1 32 9.1 9.1 33 2.5 2.5 34 1.0 1.0 35 1.0 1.0 36 1.3 1.3 37 1.1 1.1 38 1.8 1.8 39 - 40 0 0 1 5.3 5.3 2 0 0 IC1101 3 5.0 5.0 4 0 0 5 5.0 5.0 5 5.0 5.0 IC1411 3 10.9 10.8 4 5.0 5.0 5 10.4 10.4 12 0.3 0.3 13 6.3 6.3 14 6.2 6.3 15 0 0 16 9.0 9.0 12 2.5 2.7 13 2.6 2.7 14 2.7 2.7 15 2.3 2.3 16 2.3 2.3 17 2.3 2.3 18 2.3 2.3 19 0 0 20 5.3 0 12 2.9 5.0 13 2.9 5.0 14 2.9 5.0 15 0.8 5.0 16 0 0 17 0.6 0 18 0 0 19 2.5 5.0 20 0 5.0 12 3.2 3.2 13 2.8 2.9 14 2.7 3.0 15 2.9 2.8 16 0 0 17 2.7 3.0 18 2.5 2.9 19 3.2 3.2 20 0 0 32 0.7 0.5 33 2.3 2.7 34 3.2 3.2 35 0 0 36 1.8 2.3 37 1.8 2.1 38 1.7 2.5 39 1.4 1.2 40 1.3 0.9 52 1.7 2.5 53 3.2 3.2 54 3.2 3.2 55 0 3.2 56 2.8 2.8 57 3.2 3.2 58 3.2 3.2 59 3.2 3.2 60 3.2 3.2 72 1.9 3.2 73 3.2 3.2 74 0 0 75 1.6 1.6 76 1.4 1.6 77 1.6 1.6 78 1.6 1.6 79 0 0 80 0 0 92 0 0 93 0 0 94 0 0 95 0 0 96 0 0 97 0 0 98 3.2 3.2 99 0.7 0.7 100 0 0 112 1.6 1.8 113 1.6 0 114 1.6 1.6 115 1.6 1.6 116 1.6 1.6 117 1.6 1.6 118 3.2 3.2 119 1.8 1.8 120 1.5 1.6 132 2.6 2.2 133 2.6 2.2 134 2.6 2.2 135 2.4 2.2 136 2.4 2.2 137 2.4 2.2 138 2.4 2.2 139 1.6 1.6 140 1.6 1.6 DVD-LS90PP / DVD-LS93P Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP 141 3.2 3.2 142 1.2 1.2 143 1.8 1.9 144 2.1 2.1 145 0 0 146 1.6 1.6 147 1.6 1.6 148 1.5 1.6 149 0.5 0.4 161 3.2 3.2 162 0 0 163 1.5 1.5 164 0 0 165 1.4 1.4 166 1.4 1.4 167 3.2 3.2 168 0.1 0 169 1.6 1.6 181 0 0 182 3.2 3.2 183 0 0 184 0 0 185 0 0 186 0 0 187 0 0 188 0 0 189 0 0 201 0 0 202 3.2 3.2 203 1.1 1.0 204 1.5 1.4 205 0 0 206 1.4 1.4 207 1.3 1.6 208 1.6 1.7 209 3.2 3.2 221 0.4 0.1 222 0 0 223 1.6 1.5 224 0.5 0.1 225 3.2 3.2 226 1.7 1.5 227 0.3 0.1 241 1.6 1.6 242 0 0 243 1.5 1.5 244 3.1 3.1 245 3.1 3.2 246 3.2 3.2 247 0 0 228 229 1.6 0 1.5 0 IC3001 248 249 3.1 2.3 3.2 2.8 1 3.2 3.2 2 2.7 3.0 3 3.2 3.2 4 2.7 3.0 5 2.7 3.0 6 0 0 7 2.7 3.0 8 2.6 3.1 9 3.2 3.2 21 1.6 1.5 22 0 0 23 0.3 0.1 24 0.5 0.1 25 0.5 0.1 26 2.9 2.1 29 1.4 1.5 41 0 0 42 2.6 3.0 43 3.2 3.2 44 2.6 3.0 45 2.7 3.0 46 0 0 27 28 3.2 0 3.2 0 IC3051 47 48 2.7 2.8 2.9 3.1 1 4.9 4.9 2 0.2 0.2 3 0 0 4 2.1 2.1 5 5.0 5.0 21 2.2 2.2 22 0 0 23 1.6 1.4 24 1.6 1.4 25 0 0 6 7 0.8 0 0.5 0 IC3201 26 27 1.6 2.0 1.4 1.6 1 0 0 2 3.2 3.2 3 2.8 2.8 6 0.8 0 7 1.6 1.6 1 4.2 4.2 2 4.2 4.2 3 4.2 4.2 4 5 3.2 1.6 3.2 1.6 IC4002 4 5 0 4.2 0 4.2 28 29 0 1.7 0 1.5 IC4001 8 9 1.6 1.6 - 6 4.2 4.2 7 4.2 4.2 8 8.5 8.5 1 0 0 2 0 0 3 3.3 3.3 6 3.3 3.3 7 0 0 8 0 0 21 0 0 22 1.4 1.4 26 1.6 1.6 27 3.3 3.3 28 1.6 1.6 1 5.3 5.3 2 0 0 23 0 0 IC4009 3 5.3 5.3 4 5 3.3 0 3.3 0 IC4003 24 25 1.6 1.6 1.6 1.6 1 0 0 2 0 0 3 0 0 1 5.0 5.0 2 5.0 5.0 21 4.9 4.9 22 5.0 4.9 41 0 0 8 1.6 1.5 49 3.2 3.2 9 2.1 2.1 9 1.6 1.6 7 5.0 5.0 8 5.0 5.0 9 2.5 2.5 23 5.0 5.0 24 5.0 5.0 25 5.0 5.0 26 5.0 5.0 27 5.0 5.0 28 5.0 5.0 29 5.0 5.0 44 5.0 5.0 45 5.0 5.0 46 5.0 5.0 47 5.0 5.0 61 5.0 5.0 42 43 5.0 0 5.0 0 IC6001 62 63 5.0 0.2 5.0 0.2 1 3.3 3.3 2 3.3 3.3 6 0 0 157 0 0 158 0.8 0.8 159 3.2 3.2 160 0 0 172 1.1 1.1 173 0 0 174 0 0 175 0 0 176 0.8 0 177 1.3 1.3 178 3.2 3.2 179 0 0 180 3.2 3.2 192 0.9 0.9 193 1.6 1.5 194 0.8 0.8 195 1.3 1.4 196 3.2 3.2 197 1.0 0.9 198 1.3 1.4 199 1.3 1.1 200 1.3 1.4 212 0.7 0.8 213 0 0 214 2.3 2.8 215 2.3 2.8 216 3.2 3.2 217 1.4 2.1 218 0 0 219 1.1 1.1 220 1.4 1.5 232 1.5 1.6 233 0 0 234 1.7 2.5 235 0 0 236 1.1 1.1 237 0 0 238 0 0 239 3.2 3.2 240 2.9 3.1 250 251 0 2.3 0 2.8 IC3051 10 11 2.6 2.7 3.0 3.0 IC3051 30 31 1.5 1.7 1.5 1.5 252 2.6 2.8 253 0 0 254 2.6 3.0 255 3.2 3.2 256 2.8 3.0 12 0 0 13 2.5 2.8 14 3.2 3.2 15 2.3 2.8 16 3.1 3.2 17 3.1 3.2 18 3.1 3.1 19 3.0 3.1 20 1.7 2.5 32 1.6 1.5 33 0 0 34 0 0 35 0 0 36 - 37 3.2 3.2 38 1.6 1.6 39 2.3 2.8 40 - 50 51 2.7 3.0 2.9 2.8 IC3201 10 11 0 1.7 0 1.5 52 0 0 53 2.5 2.9 54 0 0 12 0 0 13 2.1 2.1 14 5.0 5.0 15 2.1 2.1 16 4.9 4.9 17 2.2 2.2 18 2.2 2.2 19 0 0 20 2.2 2.2 30 2.1 1.7 31 0.1 0.1 32 2.2 2.2 10 - 11 5.0 5.0 12 0 0 13 2.5 2.5 14 2.5 2.5 15 2.4 2.4 16 0 5.0 IC4003 10 11 1.6 0 1.6 0 12 1.6 1.6 13 1.6 1.6 14 0 0 15 1.6 1.6 16 3.3 3.3 17 1.6 1.6 18 1.6 1.6 19 1.6 1.6 20 0 0 6 0 0 7 0.3 0 8 3.2 3.2 12 0 0 13 5.0 5.0 14 0 0 15 5.0 5.0 16 0.1 0.1 17 0.1 0.1 18 0 0 19 5.0 5.0 20 4.9 5.0 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 0 0 40 5.0 5.0 52 5.0 5.0 53 0 0 54 0 0 55 0 0 56 0 0 57 0 0 58 3.1 3.1 59 4.1 4.2 60 4.5 4.5 12 2.7 2.7 13 2.7 2.7 14 5.0 5.0 10 2.9 2.9 6 5.0 5.0 5 0 0 156 0.5 0.4 9 2.9 2.9 5 0.3 0.3 4 0 0 155 2.1 2.1 5 3.3 3.3 4 4.5 4.5 3 5.0 5.0 154 1.3 1.3 4 0 0 3 1.7 1.6 1 0 0 153 1.3 1.3 49 0 0 5 5.0 5.0 64 1.4 1.4 152 0.4 0.4 IC5201 5 3.2 3.2 IC6001 10 11 2.4 0 2.4 0 IC6001 30 31 5.0 5.0 IC6001 50 51 5.0 5.0 5.0 5.0 4 - 48 5.0 5.0 IC6002 2 3 0 0 0 0 IC6006 7 8 0 4.5 0 4.5 IC3001 150 151 3.2 0.4 3.2 0.5 IC3001 170 171 1.6 0.8 1.6 0 IC3001 190 191 3.2 0 3.2 0 IC3001 210 211 0.9 1.8 1.0 1.8 IC3001 230 231 0 3.2 0 3.2 4 0 0 33 11 4.1 4.2 DVD-LS90PP / DVD-LS93P Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP 1 0 0 IC6201 2 3.2 3.2 3 3.2 3.2 1 2.6 2.7 2 0.7 0.6 3 2.3 2.9 4 0.8 0.5 5 1.0 0.7 6 2.3 2.7 7 1.1 0.8 8 0.9 0.6 9 2.2 2.1 21 0 1.4 22 0 2.5 23 3.2 2.1 26 1.7 2.5 27 0 0 28 1.7 2.5 29 0.8 0.7 41 1.4 1.4 42 1.3 1.4 43 1.6 1.7 24 25 3.2 2.2 1.2 2.8 IC6301 44 45 1.6 1.7 1.5 1.8 46 0 0 47 3.2 3.2 48 1.7 2.7 1 2.8 2.9 2 0.7 0.5 3 0.6 0.5 4 2.1 2.1 5 2.1 2.1 6 5.1 5.1 7 2.1 2.1 8 0 0 9 0 0 21 2.6 2.6 22 2.5 2.5 23 0 0 24 2.5 2.5 25 7.5 7.5 26 2.6 2.6 27 2.5 2.5 28 4.1 4.1 29 3.3 3.3 41 0 0 44 5.1 5.1 45 0 0.1 46 3.8 3.5 47 5.0 5.0 48 5.0 5.0 49 3.0 3.0 61 2.6 2.6 42 43 2.8 1.8 2.8 1.8 IC8001 62 63 1.4 2.1 1.4 2.1 1 0.5 0.5 2 3.1 3.1 3 0.2 0.1 4 2.6 0 5 3.3 3.3 6 3.1 3.1 7 3.3 3.3 8 0.7 0 9 0.2 0.1 21 0.2 0.4 22 0 0 23 0 0 26 0 0 27 1.4 1.2 28 3.2 3.3 29 1.4 1.2 41 0 0 42 0.1 0.1 43 3.3 3.3 46 0 0 47 3.3 3.3 48 0 0 1 0.5 0.5 2 0.1 0.1 3 0.1 0.1 6 3.2 3.2 7 3.1 3.1 8 3.3 3.3 1 0 0 1 -2.5 -2.5 2 -2.5 -2.5 IC8801 2 0 0 3 -2.5 -2.5 24 25 1.3 1.4 1.7 1.3 IC8201 44 45 3.3 0.1 3.3 0.1 IC8202 4 5 0 3.3 0 3.3 IC8403 4 5 -12.7 1.5 -12.6 1.5 7 1.6 1.6 8 7.5 7.5 1 1.9 1.8 3 7.5 7.5 1 3.3 3.3 6 1.6 1.6 IC8802 2 5.0 5.0 Q1001 3 4 8.2 9.1 8.2 9.1 5 1.1 1.1 6 1.1 1.1 3 10.1 9.8 1 11.8 12.1 G 5.0 5.0 E 8.5 8.4 3 2.3 0 Q8201 3 4 0.5 0.5 0.6 0.5 Q8406 3 4 2.1 -12.6 2.0 -12.6 E 4.9 4.9 2 11.8 12.1 Q4001 C 9.1 9.1 Q5215 C 4.9 4.9 5 1.0 1.0 6 3.1 3.1 5 1.5 1.5 6 0.9 1.0 QR1008 C 5.0 5.0 1 5.1 5.1 1 1.1 1.1 1 3.7 4.9 2 1.1 1.1 Q1101 2 0 0 Q1622 D 0 0 Q5211 2 4.3 4.9 1 0.5 0.5 2 0.5 0.5 1 7.5 7.5 2 1.5 1.5 QR1007 C 5.0 5.0 1 0.2 0.2 S 0 0 E 0 0 B 0 0 IC6301 10 11 3.2 3.2 IC6301 30 31 0.9 1.0 0.6 0.9 12 3.2 3.2 13 - 14 - 15 - 16 0 0.4 17 0 0.4 18 0 2.6 19 3.2 2.3 20 3.2 0.9 32 0.8 0.7 33 34 1.4 1.1 1.6 0.8 IC6351 4 5 0 3.2 0 3.2 35 1.5 1.5 36 1.4 1.0 37 3.2 3.2 38 1.2 1.5 39 1.2 0.9 40 1.3 1.4 6 3.2 3.2 7 0 0 8 3.2 3.2 12 3.5 3.4 13 3.4 3.4 14 0 0 15 0 0 16 0 0 17 0 0 18 0.7 0 19 2.6 2.6 20 2.5 2.5 32 3.1 3.1 33 0.9 0.9 34 0.5 0.5 35 3.3 3.3 36 1.7 1.7 37 0 0 38 0 0.1 39 4.9 4.9 40 3.1 3.1 52 3.0 2.9 53 2.3 2.3 54 2.7 0 55 2.7 2.7 56 3.7 3.7 57 2.1 2.1 58 5.1 5.1 59 0 0 60 2.5 2.5 12 0.1 0 13 3.2 2.3 14 1.7 1.7 15 0 0 16 0.6 0.6 17 0.1 0.1 18 0.1 0.1 19 0.1 0.1 20 0.9 1.7 32 3.3 3.3 33 1.6 1.6 34 0 0 35 3.3 3.3 36 1.7 1.7 37 1.6 1.6 38 0 0 39 3.3 3.3 40 3.2 3.3 2 0 0 3 0 0 4 0 0 6 5.0 5.0 7 0 0 8 5.1 5.1 2 1.6 1.6 3 1.5 1.5 6 1.3 1.3 7 8.5 8.5 8 16.8 16.8 Q1002 3 4 6.3 9.1 6.3 9.1 5 2.6 2.6 1 5.3 5.3 Q1412 C 11.1 11.1 2 5.3 5.3 Q1003 3 4 3.6 9.1 3.6 9.1 5 5.3 5.3 Q1621 C 6.7 6.4 6 5.3 5.3 1 0 0 2 0 0 IC8001 10 11 0 3.4 0 3.3 IC8001 30 31 3.3 3.3 3.3 3.3 IC8001 50 51 1.6 1.3 1.6 1.3 3 0 0 64 2.7 2.9 E 0 0 IC8201 10 11 3.3 3.3 3.3 3.3 IC8201 30 31 3.2 0.2 3.3 0.1 IC8401 5 5.0 5.0 IC8602 4 5 0 1.3 0 1.3 3 0 0 1 2.6 2.6 Q1402 3 4 11.8 7.9 12.1 12.1 2 2.6 2.6 B 9.1 9.1 E 0 0 B 0.1 0.3 E 0.7 0.7 6 7.4 1.3 Q4002 C 3.1 3.1 Q8001 C 0 0 1 7.3 7.3 2 0.9 1.0 E 0 0 QR1402 C 0 0 B 0.5 0.5 5 7.4 1.3 34 7 7.4 1.3 6 2.6 2.6 8 7.4 1.3 B 0 0 E 0.5 0 E 11.3 11.3 Q5201 C 3.7 4.9 B 0 0 1 3.0 2.9 2 2.8 2.8 Q8401 3 4 1.4 -12.4 1.5 -12.4 5 2.1 2.0 6 1.5 1.5 B 4.2 4.2 1 5.1 5.1 2 0.2 0.2 B 10.6 10.6 B 1.1 0.1 Q8002 3 4 5.1 2.5 5.1 2.3 E 0 0 E 9.4 9.4 Q5202 C 4.9 4.9 5 3.2 2.9 6 5.1 5.1 QR1411 3 4 0.1 4.1 0.1 4.1 5 0 0 6 11.3 11.3 B 0 0.1 B 9.0 9.0 DVD-LS90PP / DVD-LS93P Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP E 3.2 3.2 QR1413 C 0 0 QR4003 C -2.0 4.3 QR4007 C -1.0 -0.7 1 0 0 2 0.7 0.7 E 9.1 9.1 E 4.3 4.3 B 9.0 9.0 1 0 0 2 0 0 B 4.2 0 1 0.1 0.1 E 0 0 2 0 0 QR4008 C 0.1 0.1 5 0.7 0.7 6 0 0 B 3.1 3.1 QR4012 3 4 0 0 0 0 QR1601 3 0 0 QR4004 3 5.0 5.0 4 1.3 1.3 5 5.0 5.0 4 0 0 5 4.2 0 B 3.1 3.1 1 0 0 QR4009 2 3 0 0 0 5.0 QR4013 3 4 0 0 0 0 1 0 3.2 1 0 0 2 0.7 0.7 9 1.3 1.3 Q4001 C 0 0 B 5.0 5.0 4 0.6 0 5 0.6 0 2 0 0 E 0 0 QR4005 3 0 0 4 4.2 0 5 4.2 0 1 0 0 5 0.7 0.7 6 0 0 12 2.3 2.3 13 1.6 1.6 QR4002 C 9.1 9.1 QR4006 E C 4.3 4.2 4.3 4.2 QR4011 3 4 0 0 0 0 E 9.1 9.1 E 3.2 3.2 2 -0.6 0.7 QR5221 C 3.2 -0.8 B 0.1 0.1 15 0.1 0.1 16 1.6 1.6 17 1.7 1.7 B 7.8 7.8 B 0 0 5 -0.6 0.7 6 0 0 19 - 20 8.7 8.7 13.2. INVERTER P.C.B. Ref No. MODE PLAY STOP 1 3.3 3.3 2 1.5 1.5 3 1.2 1.2 4 1.7 1.7 5 0.1 0.1 6 1.6 1.6 7 0.1 0.1 8 1.1 1.1 Ref No. MODE PLAY STOP 1 0.1 0.1 2 1.7 1.7 3 0.1 0.1 Q1901 4 5 1.6 9.9 1.6 9.9 6 9.8 9.8 7 9.4 9.4 8 9.4 9.4 IC1901 10 11 0.5 4.9 0.5 4.9 35 14 2.8 2.8 18 - DVD-LS90PP / DVD-LS93P 36 DVD-LS90PP / DVD-LS93P 14 BLOCK DIAGRAM NOTE Circuit voltage and waveform described herein shall be regarded as reference information when probing defect point, because it may differ from an actual measuring value due to difference of Measuring instrument and its measuring condition and product itself. 14.1. OVERALL BLOCK DIAGRAM TRAVERSE MECHANISM UNIT MAIN P.C.B. IC3001 IC4001 IC4003 AUDIO POWER AMP DC VOLUME CONTROL PICK-UP UNIT SPEAKER HEADPHONE IC2651 SPINDLE MOTOR DV2.1 RF SIGNAL PROCESSOR/ AV DECODER/ SERVO CONTROLLER/ OPTICAL DISC CONTROLLER/ SYSTEM CONTROLLER SPINDLE MOTOR DRIVE AUDIO D/A CONVERTER AUDIO OUT IC2601 TRAVERSE MOTOR TRAVERSE MOTOR DRIVE IC6301 FOCUS COIL TRACKING COIL OPT OUT 16Mbit FLASH ROM IC6001 LED IC3201 REMOTE CONTROL OPERATION MPU IC6351 VIDEO DRIVE IC8001 VIDEO SIGNAL PROCESSOR LCD VIDEO OUT 8Kbit EEP ROM IC3051 KEY 64Mbit SDRAM DVD-LS90PP/93P OVERALL BLOCK DIAGRAM 37 DVD-LS90PP / DVD-LS93P 14.2. POWER SUPPLY BLOCK DIAGRAM IC6001 (OPERATION MPU) R.SKIP S6020 2 STICK F.SKIP S6019 AV SELECT S6018 Q1402 JK1401 DC IN JK1401 1 DC IN IP1401 D1401 D1404 POWER CTL IC1401 OPERATION P.C.B. CTL STOP S6803 QR1402 CTL JK1421 BATTERY JK1421 1 BAT+ IP1421 PAUSE S6802 D1405 Q1412 D1411 IC1411 D1413 (REG OPR+5V) D1414 5 VIN VOUT 1 3 VPF VOR FP6801 FP6001 5 2 21 REMOCON OSC2 9 X6001 FP6801 FP6001 3 4 4 OSC1 10 DISPLAY S6806 SWITCHING ADP ON L IC1001 1 KEY FP6801 FP6001 6 1 DOWN S6805 QR1413 QR1411 REMOCON RETURN S6804 SWITCHING FP6801 FP6001 2 5 IR6801 LEFT S6809 VOL(-) S6814 ENTER S6808 VOL(+) S6813 RIGHT S6807 AUDIO S6815 MENU S6810 PICTURE S6816 UP S6811 MONITOR S6817 TOPMENU S6812 PLAY S6818 OPEN-H 25 OPEN/CLOSE S6003 D1016 (REG CONTROLLER) Q1001 SWITCHING D +1.2V 3 PVCC1 OUT2 4 8 PVCC2 D1017 32 VCC QR1007 POWER NG DET QR1008 POWER NG DET Q1002 SWITCHING D +3.3V DD +3.3V PICK-T 3 FP6801 FP6001 1 6 TH6040 D6007 OUT3 7 D +5V A +5V 24 PLAY 15 XRST IC1004 46 DVD ON H REG 45 LCD ON H Q1003 47 P ON H M +5.5V SWITCHING IC1003 OUT4 9 REG STAND-BY LED SWA +5V OPR +5V STB23 47 D6009 7 8 29 30 26 VREF+ VDD VDD2 VDD3 STBY-LED CHARGE LED D6008 IC1101 27 CHARGE-LED REG STB5 45 STB4 46 12 OUT5 42 PWRON H PWR +9V 61 PWRNG L T1101 28 P52(PWROK H ) Q1101 5 4 6 3 LCD +5V 48 OPR ON H LCD +17V 17 ADAP ON L LCD +7.5V 7 2 8 1 LCD -13V DVD-LS90PP/93P POWER SUPPLY BLOCK DIAGRAM 38 DVD-LS90PP / DVD-LS93P 14.3. SERVO BLOCK DIAGRAM RF SIGNAL MOTOR DRIVE SIGNAL TRACKING ERROR SIGNAL FOCUS ERROR SIGNAL IC2601 IC3001 (DV2.1) OPTICAL PICK UP UNIT VIN5 PHOTO DETECTOR VIN6 B1 B2 A1 A4 B4 A2 A3 VIN7 HEAD AMP VIN8 B3 VIN1 VIN2 VIN3 VIN4 (TRAVERSE MOTOR DRIVE) 134 133 132 131 138 137 PWM1 147 2 VIN1 VO3+ 136 135 FODRV 3 VIN2 LEVEL SHIFT 127 LPCO1 LD DRIVE LPC1 124 DRV0 75 TRVDRV 23 LPCO2 LD DRIVE LPC2 RFINN RFINP TRAVERSE MOTOR VO3- 18 + 126 125 110 111 IC2601-11,12,13,14 0.4Vp-p(0.5usec./div.) IC2651 SPINDLE MOTOR UNIT DC2 VIN3 123 Q5202,Q5215 LASER DIODE DC1 + Q5201,Q5211 LASER DIODE 17 + PWM0 148 VREF TRDRV OPTICAL PICK UP UNIT ACTUATOR (SPINDLE MOTOR DRIVE) 2 RNF DRIVER 4 + A3 28 27 A2 H1+ P7 61 + VO1+ H1- H2+ ACTMUT-L 9 CH1,2 MUTE + IC2651-24 5.0Vp-p(5msec./div.) + - HALL AMP + - TRACKING COIL VO2+ 13 12 TR- FO+ FOCUS COIL VO2- 11 FO- LEVEL SHIFT TL 11 TR+ A1 HALL1 10 LEVEL SHIFT CH3 MUTE BIAS1 CURRENT SENSE AMP 9 14 M+5.5V GAIN CONTROL 7 VO1+ TSD + - PS TORQUE SENS AMP + - + - PS EC 23 22 SS SPDRV + + 65 P6 76 DRV1 HALL2 12 H2- + - D R CK 13 H3+ + - Q VCC ECR 21 VHALF 128 Q FG 24 FG 72 HALL3 14 H3- + - TRV-SW+ 58 P10 TRAVERSE SW DVD-LS90PP/93P SERVO BLOCK DIAGRAM 39 DVD-LS90PP / DVD-LS93P 14.4. AUDIO BLOCK DIAGRAM IC4001-14,15 4.0Vp-p(0.5msec./div.) IC3001-171 5.5Vp-p(5usec./div.) IC3001 IC4003 IC4001 (DV2.1) ADOUT3 171 (DMIX OUT) SRCK 170 LRCK 169 DATA RCK 19 6 7 LRCK :AUDIO SIGNAL (AUDIO POWER AMP/DC VOLUME CONTROL) (AUDIO DAC) D/A LPF 14 18 VOUTR AUDIO SERIAL PORT R-IN 8 + 10 CONTROLLER MODULATOR L-IN 12 + VOLUME CONTROL BIAS + - 26 QR4005(1/2) SIGNAL LEVEL CTRL DACCK 163 (DACSCK) SCK 5 SYSTEM CLOCK MANAGER D/A LPF 15 16 ZERR/ ZEROA DC VOL + 28 + - 15 SPEAKER R R-OUT+ + 21 MODE CONTROL 17 7 L-OUT+ + L-OUT- - SPEAKER L + - QR4009(1/2) P13 (AMUT) 55 - QR4005(1/2) SIGNAL LEVEL CTRL VOUTL HPSENSE IECOUT 177 R-OUT- BIAS S-DOWN BUFFER 2 POWER MANAGEMENT QR4009(1/2) + BUFFER + JK4003 24 IC6001 25 1 (OPERATION MPU) 2 3 HEAD PHONE 4 5 QR4008 HPSENSE-H 39 MUTE DCVOL 18 1 4 8 D+3.3V 2 7 QR4007 MUTE QR4004(1/2) P10 16 (POWER MUT) BUFFER Q4002 JACK-IN DET. QR4004(1/2) HPMUT-H 40 JK4002 JK4001 IC6002 1 BUFFER 3 9 4 5 5 HEAD PHONE 4 QR4012(1/2) IC4002(1/2) 6 7 2 IC4002(1/2) 2 1 1 D4001 QR4003 MUTE CTRL 2 OPT OUT MUTE AUDIO OUT 3 QR4012(1/2) QR4006 MUTE CTRL QR4011 (1/2) MUTE QR4013(1/2) MUTE MUTE QR4011 (1/2) QR4013(1/2) MUTE MUTE HPJOPEN-H 23 DVD-LS90PP/93P AUDIO BLOCK DIAGRAM 40 DVD-LS90PP / DVD-LS93P 14.5. VIDEO BLOCK DIAGRAM IC8001-52 1.1Vp-p (20usec./div.) IC8001-57 1.2Vp-p (20usec./div.) :VIDEO SIGNAL IC8001 (VIDEO SIGNAL PROCESSOR) 52 TRAP IC8001-26 4.0Vp-p (20usec/div.) IC8001-21 4.0Vp-p (20usec/div.) IC8001-19 3.8Vp-p (20usec/div.) LCD PANEL Q8001 Y IN AMP C IN 57 BPF PICTURE CONTROL ACC GCA N P N R-Y DEMOD GCA IC3001-152 0.6Vp-p(20usec./div.) IC3001-149 1.0Vp-p(20usec./div.) IC3001-151 0.6Vp-p(20usec./div.) IC3001-158 0.6Vp-p(20usec./div.) KILLER APC VXO GENE VXO R G B MATRIX B-Y INT/EXT SW INVERT TINT AMP 26 AMP 21 19 AMP SYNC SEP 63 XTAL IC3001-156 1.0Vp-p(20usec./div.) P 5 4 B-Y IN 46 R-Y IN 35 VDIN CSYNC 36 TO IC6001-51pin MUTE2 (CONTROLLER) AMP TO IC6001-63pin 1 (DV2.1) IC3201 (VIDEO DRIVE) 7 VCOUT CIN 4 5 VYOUT YIN BIAS 6dB + 6MHz LPF 75Ω 30 CVOUT BUFFER IC8202 6 VIDEO OUT CLAMP IC8202 2 3 5 5 VDB IN CPH2 27 MS HC CPV 6dB 12MHz LPF 75Ω 24 BIAS PY/GIN BIAS 14 MUTE2 15 BIAS OEV2 OEV1 VC H STV2 16 GATE DRIVER 17 18 19 26 IC3201-18 1.2Vp-p(20usec./div.) PB/BIN 13 FH IC3201-21 1.2Vp-p(20usec./div.) PY/GOUT L 11 23 CPH3 25 CLAMP PROUT STH1 CPH1 29 Q8201 23 PBOUT 21 OEH OEV3 8 6dB PYOUT 14 POL PO NL DAC3OUT 152 Q8406,8401 1 2 HD IN 1 29 MUTE1 2 1 TP 5 4 DAC2OUT 151 SOURCE DRIVER VCOM SYNC IN IC8202 JK3201 DAC1OUT 149 BLUE IC8201 Q8002 LCD Y IC3001 DAC4OUT 156 B-OUT LCD C VJIN-L DAC5OUT 158 GREEN 28 POL IC8403 MUTE1 G-OUT VCOM OEH STH1 CLK1 CLK2 CLK3 2 TO IC6001-52pin RED VCOM 34 SYNC IN R-OUT 6dB 12MHz LPF 75Ω 21 PB/BOUT IC3201-30 2.0Vp-p(20usec./div.) 20 PR/RIN 6dB 12MHz LPF 75Ω 18 PR/ROUT 17 IC3201-24 2.0Vp-p(20usec./div.) 41 DVD-LS90PP/93P VIDEO BLOCK DIAGRAM DVD-LS90PP / DVD-LS93P 42 DVD-LS90PP / DVD-LS93P 15 INTERCONNECTION SCHEMATIC DIAGRAM & SCHEMATIC DIAGRAM NOTES 15.1. INTERCONNECTION SCHEMATIC DIAGRAM FP6801 6 5 4 3 2 1 FP6001 1 OPA+5V 2 REMOIRQ 3 DGND 4 KEY2 5 KEY 6 PLAY OPERATION P.C.B. D FP5201 30 DVDVR 29 CDVR 28 NC 27 IMON 26 F1 25 F2 24 TD 23 TC 22 TA 21 TB 20 GND(NC) 19 RF 18 GND(NC) 17 HFM(3.3V) 16 NC 15 DVDLD+ 14 LDGND 13 CDLD+ 12 NC 11 SW 10 T1 9 T2 8 A+5V 7 VREF(2.2V) 6 AGND 5 NC 4 FO3 TR2 TR+ 1 FO+ MAIN P.C.B. C PICK-UP UNIT B M M TRAVERSE MECHANISM UNIT DC1 DC2 SW1 SW2 VCC VH H2H2+ H3H3+ H1H1+ A2 A2 A3 A3 A1 A1 FP2501 1 DC1 2 DC2 3 SW1 4 SW2 5 VCC 6 VH 7 H28 H2+ 9 H3H3+ 10 11 H1H1+ 12 13 A2 A2 14 15 A3 A3 16 17 A1 A1 18 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 VCOM STH1 GND(STH2) VB RED GREEN BLUE VGND OEH VDD MODE GND(UD) CLK1 CLK2 CLK3 GND(STV1) RL VEE VCOM GND(NC) STV2 OEV3 OEV2 OEV1 CPV VGND VSS VGND VDD VGON INV-GND INV-GND INV-GND NC BLON-H DUTY NC PWR+9V PWR+9V PWR+9V FP8005 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 SPL+ SPL- FP8003 1 2 SPR+ SPR- FP8004 1 2 FP1901 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 VCOM STH1 GND(STH2) VB RED GREEN BLUE GND OEH VDD MODE GND(UD) CLK1 CLK2 CLK3 GND(STV1) RL VEE VCOM GND(NC) STV2 OEV3 OEV2 OEV1 CPV GND VSS GND VDD VGON INV-GND INV-GND INV-GND NC BLON-H DUTY NC PWR+9V PWR+9V PWR+9V HI LOW VCOM STH1 VB RED GREEN BLUE OEH VDD MODE CLK1 CLK2 CLK3 RL NC(STH2) VEE GND VCOM STV2 OEV3 OEV2 OEV1 CPV GND(UD) NC(STV1) NC VSS GND VDD NC VGON SPEAKER(L) P1902 1 2 BACK LIGHT PANEL UNIT E OPR+5V REMOIRQ DGND KEY2 KEY PLAY LCD PANEL F FP1903 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 SPEAKER(R) INVERTER P.C.B. A DVD-LS90PP/LS93P INTERCONNECTION SCHEMATIC DIAGRAM 1 2 3 4 5 43 6 7 8 9 DVD-LS90PP / DVD-LS93P 15.2. SCHEMATIC DIAGRAM NOTES This schematic diagram may be modified at any time with the development of new technology. Important safety notice: Components identified by mark have special characteristics important for safety. Furthermore, special parts which have purpose of fire-retardant (resistors), high-quality sound (capacitors), low-noise (resistors), etc. are used. When replacing any of components, be sure to use only manufacture´s specified parts shown in theparts list. Important safety notice: There are special components used in this equipment which are important for safety. These parts are marked by in the schematic diagrams. It is essential that these critical parts should be replaced with manufacturer’s specified parts to prevent shock, fire, or other hazards. Do not modify the original design without permission of manufacturer. Caution! IC and LSI are sensitive to static electricity. Secondary trouble can be prevented by taking care during repair. Cover the parts boxes made of plastics with aluminum foil. Ground the soldering iron. Put a conductive mat on the work table. Do not touch the legs of IC or LSI with the fingers directly. 44 DVD-LS90PP / DVD-LS93P 16 SCHEMATIC DIAGRAM 16.1. CHARGE BATTERY SECTION (MAIN P.C.B. (1/9)) SCHEMATIC DIAGRAM A G A (ADAPTOR) DC-IN (SWITCHING) (POWER CTL) TO BATTERY F E (SWTCHING) (REG OPR+5V) (SWTCHING) A :CHG SECTION B :PWR SECTION C :SRV SECTION D :OPU SECTION E :DV2 SECTION F :VOUT SECTION G :AOUT SECTION H :OPR SECTION I :LCD SECTION (CHARGE CTL) D (ADP ON L ) (SWTCHING) C (SWTCHING) B (SWTCHING) A DVD-LS90PP/93P CHARGE BATTERY SECTION (MAIN P.C.B.(1/9)) SCHEMATIC DIAGRAM 1 2 3 4 5 6 45 7 8 9 10 11 DVD-LS90PP / DVD-LS93P 16.2. POWER SUPPLY SECTION (MAIN P.C.B. (2/9)) SCHEMATIC DIAGRAM (SWITCHING) B G (PWR-NG DET) (PWR-NG DET) (SWITCHING) F OP (REG SWA+5V) A (SWITCHING) E (REG CONTROL) D (REG A+5V) C A :CHG SECTION B :PWR SECTION C :SRV SECTION D :OPU SECTION E :DV2 SECTION F :VOUT SECTION G :AOUT SECTION H :OPR SECTION I :LCD SECTION B (SWITCHING) (REG LCD+5V) A DVD-LS90PP/93P POWER SUPPLY SECTION (MAIN P.C.B.(2/9)) SCHEMATIC DIAGRAM 1 2 3 4 5 6 46 7 8 9 10 11 DVD-LS90PP / DVD-LS93P 16.3. SERVO SECTION (MAIN P.C.B. (3/9)) SCHEMATIC DIAGRAM C G E (SPINDLE MOTOR DRIVE) (TRAVERSE MOTOR DRIVE) F D C TO TRAVERSE MECHANISM UNIT A :CHG SECTION B :PWR SECTION C :SRV SECTION D :OPU SECTION E :DV2 SECTION F :VOUT SECTION G :AOUT SECTION H :OPR SECTION I :LCD SECTION B A DVD-LS90PP/93P SERVO SECTION (MAIN P.C.B.(3/9)) SCHEMATIC DIAGRAM 1 2 3 4 5 6 47 7 8 9 10 11 DVD-LS90PP / DVD-LS93P 16.4. OPTICAL PICK UP SECTION (MAIN P.C.B. (4/9)) SCHEMATIC DIAGRAM D (SWITCHING) RF SIGNAL G TO PICK-UP UNIT F (SWITCHING) E D C (DVD LD SWITCHING) (DVD LD SWITCHING) B A :CHG SECTION B :PWR SECTION C :SRV SECTION D :OPU SECTION E :DV2 SECTION F :VOUT SECTION G :AOUT SECTION H :OPR SECTION I :LCD SECTION A 1 2 (CD LD SWITCHING) (CD LD SWITCHING) 3 4 5 6 48 7 DVD-LS90PP/93P OPTICAL PICK UP SECTION (MAIN P.C.B.(4/9)) SCHEMATIC DIAGRAM 8 9 10 11 DVD-LS90PP / DVD-LS93P 16.5. DV2 SECTION (MAIN P.C.B. (5/9)) SCHEMATIC DIAGRAM A :CHG SECTION B :PWR SECTION C :SRV SECTION D :OPU SECTION E :DV2 SECTION F :VOUT SECTION G :AOUT SECTION H :OPR SECTION I :LCD SECTION RFKWPS81Z160 (SDRAM) (16M FLASH ROM) G E VIDEO SIGNAL AUDIO SIGNAL RF SIGNAL F (FOR FLASH ROM WRITING) E (EEPROM) D (DV2.1) C B (RESET) A 1 2 3 4 5 6 49 7 8 DVD-LS90PP/93P DV2 SECTION (MAIN P.C.B.(5/9)) SCHEMATIC DIAGRAM 9 10 11 DVD-LS90PP / DVD-LS93P 16.6. VIDEO OUT SECTION (MAIN P.C.B. (6/9)) SCHEMATIC DIAGRAM F VIDEO SIGNAL G (VIDEO DRIVE) F E VIDEO OUT D2 D C B A :CHG SECTION B :PWR SECTION C :SRV SECTION D :OPU SECTION E :DV2 SECTION F :VOUT SECTION G :AOUT SECTION H :OPR SECTION I :LCD SECTION A 1 2 DVD-LS90PP/93P VIDEO OUT SECTION (MAIN P.C.B.(6/9)) SCHEMATIC DIAGRAM 3 4 5 6 50 7 8 9 10 11 DVD-LS90PP / DVD-LS93P 16.7. AUDIO OUT SECTION (MAIN P.C.B. (7/9)) SCHEMATIC DIAGRAM G AUDIO SIGNAL G 27 HEAD PHONES (AUDIO POWER AMP) (MUTE) (MUTE) 27 (MUTE) (MUTE) F HEAD PHONES E 27 (MUTE) (MUTE) 27 D (REG) (MUTE) OPT OUT AUDIO OUT (MUTE) C (MUTE) (AUDIO DAC) (JACK-IN DET) (AMP) B A :CHG SECTION B :PWR SECTION C :SRV SECTION D :OPU SECTION E :DV2 SECTION F :VOUT SECTION G :AOUT SECTION H :OPR SECTION I :LCD SECTION (SWITCHING) A (SWITCHING) (SWITCHING) 1 2 3 4 5 6 51 7 8 9 DVD-LS90PP/93P AUDIO OUT SECTION (MAIN P.C.B.(7/9)) SCHEMATIC DIAGRAM 10 11 DVD-LS90PP / DVD-LS93P 16.8. OPERATION SECTION (MAIN P.C.B. (8/9)) SCHEMATIC DIAGRAM H (SELECTOR) G F TO FP6801 OPERATION P.C.B. E (OPERATION MPU) D C (VOL AMP) B A :CHG SECTION B :PWR SECTION C :SRV SECTION D :OPU SECTION E :DV2 SECTION F :VOUT SECTION G :AOUT SECTION H :OPR SECTION I :LCD SECTION A DVD-LS90PP/93P OPERATION SECTION (MAIN P.C.B.(8/9)) SCHEMATIC DIAGRAM 1 2 3 4 5 6 52 7 8 9 10 11 DVD-LS90PP / DVD-LS93P 16.9. LCD IF SECTION (MAIN P.C.B. (9/9)) SCHEMATIC DIAGRAM I G 3300 2200 (REG) TO FP1901 INVERTER P.C.B. 7 7 TL8602 TL8603 TL8604 7 F G1C1R5JA0041 (CONTROLLER) E -E1 (REG 5V) TO SPEAKER(L) D TO SPEAKER(R) (BUFFER) (I NV.) (BUFFER) (EEPROM) 002192 (I NV.) C (AMP) B R (AMP) V (VIDEO SIGNAL PROCESSOR) VIDEO SIGNAL A AUDIO SIGNAL 1 2 3 4 5 6 53 7 8 9 A :CHG SECTION B :PWR SECTION C :SRV SECTION D :OPU SECTION E :DV2 SECTION F :VOUT SECTION G :AOUT SECTION H :OPR SECTION I :LCD SECTION DVD-LS90PP/93P LCD IF SECTION (MAIN P.C.B.(9/9)) SCHEMATIC DIAGRAM 10 11 DVD-LS90PP / DVD-LS93P 16.10. OPERATION SECTION (OPERATION P.C.B.) SCHEMATIC DIAGRAM G F TO FP6001 MAIN P.C.B. E D C B A DVD-LS90PP/93P OPERATION P.C.B. SCHEMATIC DIAGRAM 1 2 3 4 5 6 54 7 8 9 10 11 DVD-LS90PP / DVD-LS93P 16.11. INVERTER SECTION SCHEMATIC DIAGARAM G VIDEO SIGNAL TO FP8005 MAIN P.C.B. TO LCD PANEL F (INV.CTL) (INV.) TO BACK LIGHT PANEL E D C B A DVD-LS90PP/93P INVERTER P.C.B. SCHEMATIC DIAGRAM 1 2 3 4 5 6 55 7 8 9 10 11 DVD-LS90PP / DVD-LS93P 56 DVD-LS90PP / DVD-LS93P 17 CIRCUIT BOARD ASSEMBLY 17.1. MAIN P.C.B. (1/2) (COMPONENT SIDE) MAIN P.C.B. (1/2) F E D C B A DVD-LS90PP/93P MAIN P.C.B. (1/2) (RFKBLS90MP) (COMPONENT SIDE) 1 2 3 4 5 57 6 7 8 9 DVD-LS90PP / DVD-LS93P 17.2. MAIN P.C.B. (2/2) (FOIL SIDE) MAIN P.C.B. (2/2) F Transistors Q1001 D-6 Q1002 D-6 Q1003 D-6 Q1101 D-6 Q1402 E-2 Q1412 E-6 Q1621 E-3 Q1622 D-5 Q4001 B-2 Q4002 C-2 Q5201 A-5 Q5202 A-5 Q5211 A-5 Q5215 A-5 Q8001 D-4 Q8002 D-4 Q8201 E-4 Q8401 E-4 Q8406 E-4 E C C C C F C F C F F F F F F C C F C C Transistors-resistors QR1007 D-2 F QR1008 D-2 F QR1402 E-2 F QR1411 E-6 C QR1413 E-5 C QR1601 E-5 C QR4001 C-2 F QR4002 B-2 F QR4003 A-6 C QR4004 A-6 C QR4005 A-5 C QR4006 A-6 C QR4007 C-1 F QR4008 C-6 C QR4009 A-6 C QR4011 B-6 C QR4012 B-6 C QR4013 A-6 C QR5221 A-6 F Integrated Circuits IC1001 D-6 C IC1003 D-6 C IC1004 D-6 C IC1101 D-6 C IC1401 E-2 F IC1411 E-6 C IC1601 E-5 C IC2601 B-2 C IC2651 B-3 C IC3001 C-5 C D C B MAIN P.C.B. IC3051 C-2 F CL3007 IC3201 B-4 F CL3008 IC4001 A-5 C CL3009 IC4002 B-6 C CL3010 IC4003 A-5 C CL3011 IC4009 A-5 C CL3012 IC5201 A-6 F CL3013 IC6001 D-5 C CL3014 IC6002 D-5 C CL3015 IC6006 C-3 F CL3016 IC6201 C-3 F CL3017 IC6301 C-3 F CL3018 IC6351 C-3 F CL3019 IC8001 E-4 C CL3035 IC8201 D-3 F CL3201 IC8202 E-3 F CL3203 IC8401 D-4 C CL3204 IC8403 D-4 C CL3205 IC8602 D-4 C CL3206 IC8801 C-4 F CL3207 IC8802 E-4 F CL3208 Test Points CL4001 CL1001 E-6 C CL4002 CL1002 D-6 C CL4003 CL1003 D-5 C CL4004 CL1004 C-1 F CL4005 CL1005 C-2 F CL4006 CL1006 D-6 C CL4007 CL1007 C-6 C CL4008 CL1008 C-5 C CL4009 CL1009 D-6 C CL4010 CL1010 D-3 F CL4011 CL1401 F-6 C CL4012 CL1402 F-6 C CL4013 CL1403 F-5 C CL4014 CL1404 F-5 C CL4015 CL1405 F-5 C CL4016 CL1406 F-5 C CL4017 CL1601 E-3 F CL4018 CL1602 E-5 C CL4019 CL2001 B-4 C CL4020 CL2651 B-3 C CL4021 CL2652 B-3 C CL4022 CL2653 A-3 C CL4023 CL2654 B-3 C CL4024 CL2655 B-3 C CL4025 CL2656 A-3 C CL4026 CL3001 B-2 F CL4027 CL3004 B-5 C CL5201 CL3005 B-4 C CL5202 CL3006 B-4 C CL5203 B-4 B-4 A-2 B-4 B-4 C-4 C-4 C-4 C-4 C-4 C-4 C-4 C-4 C-4 B-3 B-4 C-6 C-6 C-6 C-6 C-6 A-5 A-4 B-6 B-6 A-5 A-5 A-5 A-5 A-6 A-6 B-6 A-6 B-6 B-6 B-6 B-6 B-6 B-6 C-6 C-6 B-6 B-6 B-6 B-6 C-6 C-6 C-6 E-3 A-2 A-2 C C C C C C C C C C C C C C F C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C F C C CL5204 B-4 CL5205 B-4 CL6001 C-4 CL6002 C-4 CL6003 C-4 CL6004 D-5 CL6005 C-5 CL6006 D-5 CL6007 D-5 CL6008 D-5 CL6009 D-5 CL6010 A-1 CL6011 A-2 CL6012 A-3 CL6013 D-5 CL6351 C-5 CL6352 C-5 CL8001 F-3 CL8002 F-3 CL8805 D-5 TL3201 A-4 TL3202 B-4 TL3231 A-4 TL3251 A-4 TL3261 A-4 TL6001 D-5 TL8201 D-4 TL8401 E-4 TL8601 D-4 TL8602 E-4 TL8603 E-4 TL8604 E-4 Connectors FP2501 C-4 FP3031 B-3 FP5201 B-1 FP6001 A-6 FP8003 F-6 FP8004 E-4 FP8005 F-4 ADDRESS INFORMATION C…COMPONENT SIDE F…FOIL SIDE A DVD-LS90PP/93P MAIN P.C.B. (2/2) (RFKBLS90MP) (FOIL SIDE) 1 2 3 4 5 58 6 7 8 9 C C C C C C C C C C C C C C C C C F F C C C C C C C C C C C C C C F C F C C C DVD-LS90PP / DVD-LS93P 17.3. OPERATION & INVERTER P.C.B. OPERATION P.C.B. INVERTER P.C.B. (1/2) INVERTER P.C.B. (2/2) F E D LCD P.C.B. Transistor Q1901 C-7 F Integrated Circuit IC1901 D-5 C Test Points TL1901 F-5 C TL1902 E-5 C TL1903 E-5 C TL1904 F-5 C TL1905 A-7 F Connectors FP1901 F-7 F FP1903 D-7 F P1902 A-7 F OPERATION P.C.B. Test Points TL6801 B-3 TL6802 A-4 TL6803 A-2 TL6804 C-3 TL6805 E-2 TL6805 B-2 TL6807 A-4 TL6808 A-2 Connector FP6801 B-2 C ADDRESS INFORMATION C…COMPONENT SIDE F…FOIL SIDE B A (COMPONENT SIDE) 1 2 3 4 5 59 6 (FOIL SIDE) 7 DVD-LS90PP/93P OPERATION P.C.B. (REP3885A-S) & INVERTER P.C.B. (REP3894A-S) 8 9 DVD-LS90PP / DVD-LS93P 60 DVD-LS90PP / DVD-LS93P 18 EXPLODED VIEWS 18.1. Casing Parts & Mechanism Section Exploded View 61 DVD-LS90PP / DVD-LS93P 18.2. Mechanism Section Exploded View 62 DVD-LS90PP / DVD-LS93P 18.3. Packing & Accessories Exploded View 63 DVD-LS90PP / DVD-LS93P 19 REPLACEMENT PARTS LIST Notes: *Important safety notice: mark Components identified by characteristics important for safety. have special Furthermore, special parts which have purposes of fireretardant (resistors), high-quality sound (capacitors), lownoise (resistors), etc. are used. When replacing any of components, be sure to use only manufacture’s specified parts shown in the parts list. *Warning: This product uses a laser diode. Refer to caution statements. *Capacity values are in microfarads (µF) unless specified otherwise, P=Pico-farads (pF), F=Farads (F). *Resistance values are in ohms, unless specified otherwise, 1K=1,000 (OHM), 1M=1,000k (OHM). *The marking (RTL) indicates the retention time is limited for this item. After the discontinuation of this assembly in production, it will no longer be available. *"<IA>,<IB>" marks in Remarks indicate languages of instruction manuals. [<IA>: English, <IB>: Canadian French] *All parts are supplied by S.P.C.. Ref. No. Part No. 1 1-1 2 2-1 RFKBLS90MP RGQ0422-H REP3885A-S RMX0324 3 4 5 6 7 REZ1697 REZ1698 L5EDD2H00005 REP3894A-S RGP1319-K 8 RGQ0424-S 9 10 11 12 13 14 15 16 17 18 19 21 22 23 24 25 26 27 28 29 30 31 32 RGQ0425-S RGQ0426-S RGQ0427-S RGQ0428-S RGQ0429-H RGQ0431-K RJB3046A RKC0023 RKC0024 RMA1928 RMB0835 RML0700 RMR1705-H RMZ0780 XQN17+B4FN XQN17+BG4FN XQN17+BG6FN XQN2+B3FN XTN17+6GFJK EAS2D01R0 EAS2D01S RGQ0430-S RGU2398-S 33 34 34 35 RGU2400-S RKF0732-S RKF0732A-S RKM0535-S Part Name & Description MAIN P.C.B. HEADPHONE COVER OPERATION P.C.B. REMOTE SENSOR SPACER FFC(18P) FFC(6P) LCD PANEL INVERTER P.C.B. MONITOR CABINET ASS’Y MONITOR COVER ASS’Y SHAFT HOLDER(L) SHAFT HOLDER(R) MONO ARM MONO ARM COVER MONITOR CUSHION CUSHION MONO ARM FPC FRICTION HINGE(A) FRICTION HINGE(B) HINGE PLATE LOCK LEVER SPRING LOCK LEVER ROLLER INSULATION SHEET SCREW SCREW SCREW SCREW SCREW SPEAKER(L) SPEAKER(R) HINGE COVER OPERATION BUTTON A-R OPEN BUTTON DISC COVER DISC COVER MAIN CABINET Pcs 1 1 1 1 1 1 1 1 1 Remarks (RTL) (RTL) 1 1 1 1 1 1 2 1 1 1 1 1 1 2 1 3 14 15 4 2 1 1 1 1 1 1 1 1 (LS90PP) (LS93P) 64 Ref. No. 36 37 38 39 40 Part No. RMB0833 RMB0834 RMG0681-K RML0699 RMQ1450 41 42 43 44 44 45 RMR1703-H RMR1704-H RGL0679-W RKS0413-S RKS0413A-S RKW0788-W 46 RMV0303 47 48 49 50 51 RMY0354 XTN17+6GFJK RGK1902-Q RGU2399-S RGU2397-S 101 102 103 105 106 107 108 109 110 111 112 113 RMK0503-C BKL2E04KA RDG0514-C RHD17037 RMB0681-J RMC0448-C RMC0592-C RMC0455-3C RMG0562-K RMK0502-5C RMR1393-WC RMS0751-J 114 115 RXJ0031 RXQ0786 116 118 119 120 RAF3134A-1 XQN17+BG4FN RHD17043 RMC0593-C A2 A3 A4 K2CB2CB00006 K2KA6CB00003 N2QAHC000021 A4-1 A5 A6 A7 ETR028272008 RFEA213W-W RFEC201M RQT8067-P A7 RQT8068-C A8 RPF0046-1 C1001,0 2 C1005 C1007 C1015 C1016 C1017 C1018 C1019 C1021 C1022 C1023 C1025 C1026 C1027 C105153 Part Name & Pcs Remarks Description OPEN SPRING 1 OPEN BUTTON SPRING 1 SPEAKER RUBBER 2 LOCK LEVER 1 HEADPHONE JACK 1 COVER STOPPER 1 LCD OFF BUTTON 1 LIGHTING PIECE 1 BOTTOM CABINET 1 (LS90PP) BOTTOM CABINET 1 (LS93P) REMOTE SENSOR 1 WINDOW NOISE PREVENTION 1 SHEET HEAT SINK 1 SCREW 2 ENTER BUTTON 1 OPERATION BUTTON 1 OPERATION BUTTON 1 A-L COVER 1 DISC MOTOR 1 INTERFACE GEAR 1 SCREW 3 TILT SPRING 3 SPRING 1 SPRING 1 SPRING 1 DAMPER 3 TRAVERSE BASE 1 MOTOR COVER 1 INTERFACE GEAR 1 SHAFT DRIVE SHAFT ASS’Y 1 TRAVERSE MOTOR 1 ASS’Y OPTICAL PICK-UP 1 SCREW 2 SCREW 1 SUPPORT PLATE 1 AC CORD AV CORD REMOTE CONTROL ASS’Y BATTERY COVER AC ADAPTOR CAR ADAPTOR OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS POLYETHYLENE BAG(F.B.) 1 1 1 ECJ1VB1C105K 16V 1U 2 ECJ1VB0J105K F1H1H101A799 ECJ1VB0J474K ECJ1VB0J105K F3F1A106A047 F1H1H151A799 F3F1A106A047 F1H1H151A799 ECJ1XC1H271J ECJ1VB1A224K ECJ1VB1H682K ECJ1XB1H182K F1H1H332A798 F3G1A476A037 6.3V 1U 50V 100P 6.3V 0.47U 6.3V 1U 10V 10U 50V 150P 10V 10U 50V 150P 50V 270P 10V 0.22U 50V 6800P 50V 1800P 50V 3300P 10V 47U 1 1 1 1 1 1 1 1 1 1 1 1 1 3 1 1 1 1 <IA> 1 <IB>(LS90PP) 1 ECJ1VC1H271J F1H1A224A025 DVD-LS90PP / DVD-LS93P Ref. No. C1063 C1066 C1067,6 8 C1069 C1070 C1071 C1072 C1073 C1074 C1101 C1102 C1103 C1104 C1105,0 6 C1109 C1401 C1402 C1403 C1404 C1405 C1406 C1407 C1410 C1411 C1412 C1413 C1414 C1417 C1421,2 2 C1601 C1606 C1623 C1624 C1625 C1651 C1652 C1902 C1903 C1904 C1905 C1906 C1907 C1908 C1909 C1910 C1911 C1912,1 3 C1914 C1915 C1917 C2001 C2002 C200305 C2006 C2007 C2008 C200912 C201317 C201823 C2024,2 5 C2026,2 7 C2028 C203032 C2033 Part No. F1K1C106A062 ECJ1VB1H103K ECJ1VF1C104Z Part Name & Description 16V 10U 50V 0.01U 16V 0.1U Pcs ECJ1VB1A105K ECJ1VB1H102K F1H1H101A799 ECJ1XB1H182K ECJ1VB1A224K ECJ1VB1A105K ECJ3YB1A106K ECJ3YB1E105K ECJ1VB1C105K ECJ3YB1A106K F2H1E680A003 10V 50V 50V 50V 10V 10V 10V 25V 16V 10V 25V 1U 1000P 100P 1800P 0.22U 1U 10U 1U 1U 10U 68U 1 1 1 1 1 1 1 1 1 1 2 F1J0J1060010 ECJ1VB1H103K F1H1H101A799 ECJ3YB1E105K F2H1E680A003 ECJ1VF1C104Z F1H1H101A799 F2G1C101A038 F1H1H101A799 ECJ3YB1E105K F3F1C106A042 ECJ3YB1E105K F3F1A106A047 F1H1H101A799 ECJ1VF1C104Z 6.3V 10U 50V 0.01U 50V 100P 25V 1U 25V 68U 16V 0.1U 50V 100P 16V 100U 50V 100P 25V 1U 16V 10U 25V 1U 10V 10U 50V 100P 16V 0.1U 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 F1H1H101A799 F1K1C106A062 F1J0J1060010 ECUV1A335KBN ECJ1VF1C104Z ECUV1A335KBN F2G1C101A038 ECJ1VB1C683K F1L3F2200004 ECJ1VB1H103K ECJ1VB1C683K F1H1H101A799 ECJ1VB0J684K ECJ1VB1H222K F1H1H332A798 ECJ1VB1C105K ECJ1VB1H222K ECJ1XB1C104K 50V 100P 16V 10U 6.3V 10U 10V 3.3U 16V 0.1U 10V 3.3U 16V 100U 16V 0.068U 22U 50V 0.01U 16V 0.068U 50V 100P 6.3V 0.68U 50V 2200P 50V 3300P 16V 1U 50V 2200P 16V 0.1U 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 ECJ1VB1H222K F1J1C4750003 F1J1C4750003 ECJ1VF1C104Z ECJ1VB1C333K ECJ1VF1C104Z 50V 16V 16V 16V 16V 16V 2200P 4.7U 4.7U 0.1U 0.033U 0.1U 1 1 1 1 1 3 ECJ1VB1H562K ECJ1XB1E183K ECJ1VF1C104Z ECJ1VB0J105K 50V 5600P 25V 0.018U 16V 0.1U 6.3V 1U 1 1 1 4 ECJ1XB1C104K 16V 0.1U 5 ECJ1VF1C104Z 16V 0.1U 6 ECJ1VF1A105Z 10V 1U 2 F3F0J476A047 6.3V 47U 2 ECJ1VF1C104Z ECJ1VB1H102K 16V 0.1U 50V 1000P 1 3 ECJ1XC1H821J 50V 820P 1 Remarks Ref. No. C2034 C2501 C2601 C2602 C2603 C2604 C2605 C2606,0 7 C2651 C2652 C265356 C2657 C265860 C2661 C266264 C3001 C300205 C3007 C3008 C301113 C3016 C3017 C3019 C3021 C3023,2 4 C3025 C3026,2 7 C3039 C3040 C3051 C3054,5 5 C3056 C3057 C306163 C3101 C3102 C3103 C3104 C3107 C3108 C3201 C3202 C3203 C3204 C3210 C3212 C3214 C3215 C3221 C3222 C3226 C3233 C3237 C324143 C325158 C326168 C4001,0 2 C4003,0 4 C4005,0 6 1 1 2 F1H1A224A025 F1J1A3350002 F1J1A3350002 65 Part No. Part Name & Description 0.1U 100P 47U 0.1U 47U 0.1U 47U 0.1U Pcs ECJ1XB1C104K F1H1H101A799 F3G1A476A037 ECJ1VF1C104Z F3G1A476A037 ECJ1VF1C104Z F3G1A476A037 ECJ1VF1C104Z 16V 50V 10V 16V 10V 16V 10V 16V F3G1A476A037 F3F0J476A047 ECJ1VF1C104Z 10V 47U 6.3V 47U 16V 0.1U 1 1 4 ECJ1XB1C104K ECJ1VB1H103K 16V 0.1U 50V 0.01U 1 3 ECJ1VF1C104Z ECJ1VB1H103K 16V 0.1U 50V 0.01U 1 3 ECJ1VB1H222K ECJ1VF1C104Z 50V 2200P 16V 0.1U 1 4 ECJ1VF1C104Z ECJ1VF1A105Z ECJ1VF1C104Z 16V 0.1U 10V 1U 16V 0.1U 1 1 3 ECJ1VF1A105Z ECJ1VF1C104Z ECJ1VF1C104Z ECJ1VF1C104Z ECJ1VF1A105Z 10V 16V 16V 16V 10V 1U 0.1U 0.1U 0.1U 1U 1 1 1 1 2 ECJ1VF1C104Z F3F0J476A047 16V 0.1U 6.3V 47U 1 2 ECJ1VC1H270J ECJ1VC1H120J ECJ1VF1A105Z ECJ1VF1A105Z 50V 50V 10V 10V 1 1 1 2 ECJ1VF1C104Z ECJ1VB1H222K ECJ1VB1H102K 16V 0.1U 50V 2200P 50V 1000P 1 1 3 ECJ1VB0J105K ECJ1VF1A105Z ECJ1VF1C104Z ECJ1XC1H101J ECJ1VF1A105Z F3F0J476A047 ECJ1VB0J105K ECJ1VB1H103K ECJ1VF1C104Z F2G0G331A012 F3F0J226A057 ECJ1VB0J105K ECJ1VB1H102K F3F0J476A047 ECJ1VF1C104Z F3F0J226A057 ECJ1VB0J105K ECJ1VB0J105K F2H0G221A001 ECJ1VB1H102K 6.3V 1U 10V 1U 16V 0.1U 50V 100P 10V 1U 6.3V 47U 6.3V 1U 50V 0.01U 16V 0.1U 4V 330U 6.3V 22U 6.3V 1U 50V 1000P 6.3V 47U 16V 0.1U 6.3V 22U 6.3V 1U 6.3V 1U 25V 220U 50V 1000P 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 3 F1H1H470A799 50V 47P 8 F1H1H470A799 50V 47P 8 F1J0J1060010 6.3V 10U 2 ECJ1VC1H390J 50V 39P 2 F1J0J1060010 6.3V 10U 2 27P 12P 1U 1U 1 1 1 1 1 1 1 2 Remarks DVD-LS90PP / DVD-LS93P Ref. No. C4007,0 8 C4009,1 0 C4011,1 2 C4013,1 4 C4015 C4017 C4018 C4019 C4020 C4021 C4023 C402427 C4028 C4030 C4031,3 2 C4036 C4037,3 8 C4041,4 2 C4053,5 4 C4057 C4061 C4067 C4505 C4506 C5201 C5202,0 3 C5204,0 5 C5206 C5209,1 0 C5211 C5215 C5217 C5218 C5219,2 0 C5221 C5222 C5232 C6002 C6003 C6004 C6005 C6006 C6007,0 8 C6009 C6014 C6016,1 7 C6201 C6202 C6301,0 2 C6351 C6801 C6802 C8001 C800305 C8006 C8007 C8010,1 1 C8012 Part No. ECJ1VB1H102K Part Name & Description 50V 1000P Pcs ECJ1VB0J474K 6.3V 0.47U 2 F2G0G331A012 4V 330U 2 ECJ1VB1H103K 50V 0.01U 2 ECJ1VF1C104Z F2G1C101A038 F3F0J476A047 ECJ1VF1C104Z F3F0J476A047 F3F1A226A047 F3F0J476A047 ECJ1VF1C104Z 16V 0.1U 16V 100U 6.3V 47U 16V 0.1U 6.3V 47U 10V 22U 6.3V 47U 16V 0.1U 1 1 1 1 1 1 1 4 ECJ1VB1H102K F3F1A226A047 ECJ1VB0J105K 50V 1000P 10V 22U 6.3V 1U 1 1 2 F1J0J1060010 ECJ1XB1C104K 6.3V 10U 16V 0.1U 1 2 ECJ1VB1H103K 50V 0.01U 2 F3F1A106A047 10V 10U 2 ECJ1VB0J105K F3F1A106A047 F1K1C106A062 ECJ1VB1H102K ECJ1VF1C104Z ECJ1VB1H102K ECJ1VF1C104Z 6.3V 1U 10V 10U 16V 10U 50V 1000P 16V 0.1U 50V 1000P 16V 0.1U 1 1 1 1 1 1 2 F1J0J1060010 6.3V 10U 2 ECJ1VF1C104Z F1J0J1060010 16V 0.1U 6.3V 10U 1 2 F3F0J476A047 F3F0J476A047 F1H1H101A799 ECJ1VF1C104Z ECJ1VB1H102K 6.3V 47U 6.3V 47U 50V 100P 16V 0.1U 50V 1000P 1 1 1 1 2 F1H1H470A799 F1J0J1060010 ECJ1VF1C104Z ECJ1XB1C104K ECJ1VF1C104Z ECJ1XB1C104K F1J0J1060010 ECJ1VF1C104Z ECJ1XB1C104K 50V 47P 6.3V 10U 16V 0.1U 16V 0.1U 16V 0.1U 16V 0.1U 6.3V 10U 16V 0.1U 16V 0.1U 1 1 1 1 1 1 1 1 2 ECJ1VB0J105K F1H1H101A799 ECJ1VF1C104Z 6.3V 1U 50V 100P 16V 0.1U 1 1 2 ECJ1VF1C104Z F1H1H101A799 ECJ1VF1C104Z 16V 0.1U 50V 100P 16V 0.1U 1 1 2 ECJ1VF1C104Z F3F0J476A047 ECJ1VF1C104Z ECJ1XB1C104K ECJ1XB1C104K 16V 0.1U 6.3V 47U 16V 0.1U 16V 0.1U 16V 0.1U 1 1 1 1 3 ECJ1VB0J105K ECJ1VB1E223K ECJ1XB1C104K 6.3V 1U 25V 0.022U 16V 0.1U 1 1 2 F3F1A226A047 10V 22U 1 Remarks Ref. No. C801315 C801618 C802022 C8023 C8024 C8025 C8026 C8027 C8029 C8030 C8031 C8032 C8040 C8041 C8042 C8045 C8046 C8201 C820208 C8212 C8213 C821416 C8217 C8218 C8219 C8220 C8221 C8222 C8223 C8224,2 5 C8237 C8250 C8251,5 2 C8401 C8402 C8403 C8404 C8407 C8409,1 0 C8601 C8602 C8604 C8605 C8606 C8607 C8801 C8802 C8803 C8804 C8805 C8806 C8807 C8808 C880911 C8812 C8841 2 D1011 D1013 D1016 D1017 D1021 D1101 D1102,0 3 66 Part No. ECJ1XB1C104K Part Name & Description 16V 0.1U Pcs ECJ1VB0J105K 6.3V 1U 3 ECUM1A225KBN 10V 2.2U 3 ECJ1VB1H103K ECJ1VB1E223K F3F1A226A047 ECJ1VB1E223K ECJ1VB0J474K F3F1A106A047 ECUV1A335KBN F1H1H561A799 ECUM1A225KBN ECJ1VB1H102K ECJ1VC1H270J F1H1H560A799 ECJ1VB0J105K ECJ1VF1C104Z ECJ1VB0J105K F1H1H470A799 50V 0.01U 25V 0.022U 10V 22U 25V 0.022U 6.3V 0.47U 10V 10U 10V 3.3U 50V 560P 10V 2.2U 50V 1000P 50V 27P 50V 56P 6.3V 1U 16V 0.1U 6.3V 1U 50V 47P 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 7 ECJ1VB1H102K ECJ1VB1H103K ECJ1VB1H102K 50V 1000P 50V 0.01U 50V 1000P 1 1 3 ECJ3YB1E105K F3F1A106A047 ECJ1VB1H102K F3F1A106A047 ECJ1VB1H102K F1H1H151A799 ECJ1VB1H102K ECJ1VF1C104Z 25V 10V 50V 10V 50V 50V 50V 16V 1U 10U 1000P 10U 1000P 150P 1000P 0.1U 1 1 1 1 1 1 1 2 ECJ1VB1H102K ECJ1XC1H821J ECJ1VC1H221J 50V 1000P 50V 820P 50V 220P 1 1 2 ECJ1VF1C104Z ECJ1VB1A105K ECJ1VB1H103K F3F1C106A042 ECJ2FB0J475K ECJ1VB1H102K 16V 0.1U 10V 1U 50V 0.01U 16V 10U 6.3V 4.7U 50V 1000P 1 1 1 1 1 2 ECJ1VB1C105K ECJ1VB1H102K ECJ1XB1C104K F1H1H561A799 ECJ1VB1H102K ECJ1VB0J105K ECJ1VF1C104Z ECJ3YB1E105K F3F1A226A047 ECJ1VB1H102K ECJ1VB0J105K F3F0J476A047 ECJ1VB1H103K F3F1A226A047 ECJ1VB1C105K 16V 1U 50V 1000P 16V 0.1U 50V 560P 50V 1000P 6.3V 1U 16V 0.1U 25V 1U 10V 22U 50V 1000P 6.3V 1U 6.3V 47U 50V 0.01U 10V 22U 16V 1U 1 1 1 1 1 1 1 1 1 1 1 1 1 1 3 ECJ1VF1C104Z F1H1H101A799 16V 0.1U 50V 100P 1 1 B0JCPD000032 B0JCPD000032 MA8100M MA8039MTX B0JCPD000032 B0JCMD000022 MA2S11100L DIODE DIODE DIODE DIODE DIODE DIODE DIODE 1 1 1 1 1 1 2 Remarks 3 F1J1A3350002 F1J0J4750002 MAZ81000M DVD-LS90PP / DVD-LS93P Ref. No. D1401,0 2 D1404 D1405 D1411 D1412 D1413,1 4 D1415 D1416 D1603 D1621 D1901,0 2 D1903 D3001 D4001 D4003 D4005 D4006 D4009 D5221 D6007 D6008 D6009 D6801 D8001 D8201 D8202 D8601 Part No. JVCRB051L40T Part Name & Description DIODE JVCRB051L40T SFPA-73V MA2S11100L MAZ80510ML MA142WK Pcs Remarks 2 B0JCPE000004 DIODE DIODE DIODE DIODE DIODE 1 1 1 1 2 B0JCPE000004 B0JCPD000003 MAZ80510ML MA2S11100L B0JCPD000032 JVCRB051L40T MA3S13300L DIODE DIODE DIODE DIODE DIODE 1 1 1 1 2 MA3S132D0L MA2S11100L MA3S132D0L MA3S132D0L MA2SD2400L MA2S11100L MA2S11100L MA2S11100L MA142WK B3ACB0000108 B3AAB0000151 MAZ80560ML MA2Z07700L MA3J745D0L MA2Z07700L MA2X33800L DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 FL8201- J0HAAB000037 03 FILTER 3 FP1901 FP1903 FP2501 FP3031 FP5201 FP6001 FP6801 FP8003, 04 FP8005 K1MN40BA0059 K1MN30BA0059 K1MN18B00048 K1MN10A00068 K1MN30BA0079 K1MN06B00131 K1MN06A00048 K1KA02BA0014 CONNECTOR(40P) CONNECTOR(30P) CONNECTOR(18P) CONNECTOR(10P) CONNECTOR(30P) CONNECTOR(6P) CONNECTOR(6P) CONNECTOR(2P) 1 1 1 1 1 1 1 2 K1MN40BA0059 CONNECTOR(40P) 1 IC1001 IC1003 IC1004 IC1101 IC1401 IC1411 IC1601 IC1901 IC2601 IC2651 IC3001 IC3051 IC3201 IC4001 IC4002 IC4003 IC4009 IC5201 IC6001 IC6002 IC6006 IC6201 IC6301 IC8001 IC8201 IC8202 IC8401 IC8403 IC8602 C1ZBZ0002345 C0DBZHD00013 C0CBCDC00008 C0CBCDC00008 C0DBCMD00005 C0DBFHZ00003 C0DBDZZ00006 C0DBZKA00003 C0GBG0000048 C0GBF0000004 MN2DS03VP1H C3ABPG000133 C9ZB00000461 C0FBBK000049 NJM2115V C0ZBZ0001010 C0CBCDC00008 C0JBAS000265 MN101C87AAD C0JBAA000344 C0JBAA000175 C0EBE0000384 RFKWPS81Z160 AN2546FH-AV MN5814 C0JBAZ002192 C3EBDC000063 C0ABBB000271 NJM2904V IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Ref. No. IC8801 IC8802 Part No. Part Name & Description Pcs Remarks AN78L05M-E1 C0CBABC00147 IC IC 1 1 IP1401 IP1421 IP1901 K5H3121A0004 K5H3121A0004 K5H2021A0003 IC PROTECTOR IC PROTECTOR IC PROTECTOR 1 1 1 IR6801 B3RAD0000075 IC 1 JK1401 JK1421 JK3201 JK4001 JK4002, 03 K2ED2B000002 K4ZZ04000033 K2HC104B0027 K2HC108B0002 VJJ0686 JACK,DC IN BATTERY TERMINAL JACK,VIDEO JACK,AUDIO/OPT OUT JACK,HEADPHONE 1 1 1 1 2 K2HC105B0009 L1002 L1006,0 7 L1009 L110103 L1401 L1402 L1901 L2001,0 2 L3003 L3101 L3204 L325154 L326164 L4001 L4002 L4004 L4006 L5201 L8030 L8602 L8805 L8806 VLQ0914M150T VLQ0914M150T COIL 15UH COIL 15UH 1 2 G1C150M00009 G1C150M00009 VLQ0914M150T G1C100KA0055 COIL 15UH COIL 10UH 1 3 G1C150M00009 VLQ0849 G1C220M00043 G1C150Z00004 G1C100KA0055 COIL COIL 22UH COIL 15UH COIL 10UH 1 1 1 2 G0B200H00005 VLP0323A601R VLP0323A601R G1C220KA0055 G1C220KA0055 COIL COIL COIL 22UH COIL 22UH 1 1 1 4 J0JCC0000062 J0JCC0000062 G1C220KA0055 COIL 22UH 4 J0JBC0000028 G1C220KA0055 VLP0323A601R J0JBC0000028 G1C100KA0055 G1C120JA0041 G1C1R5JA0041 ERJ3GEY0R00 VLQ0914M150T COIL COIL 22UH COIL COIL COIL 10UH COIL 12UH COIL 1.5UH 1/10W 0 COIL 15UH 1 1 1 1 1 1 1 1 1 LB3001, 02 LB3006 LB3007 LB3203 LB4001, 02 LB400307 LB4010, 11 LB4013, 14 LB4051 LB5206 LB520713 LB5216 LB5218 LB5219 LB522124 LB522629 LB5230 LB5231, 32 LB8001 LB8201 LB8205 LB8603 J0JHC0000045 COIL 2 J0JBC0000028 VLP0323A601R VLP0323A601R VLQ0865M220T COIL COIL COIL COIL 1 1 1 2 J0JBC0000028 COIL 5 J0JBC0000028 COIL 2 J0JBC0000028 COIL 2 J0JBC0000028 J0JBC0000028 VLP0323A601R COIL COIL COIL 1 1 7 VLP0323A601R ERJ3GEY0R00 VLP0323A601R VLP0323A601R COIL 1/10W 0 COIL COIL 1 1 1 4 J0JCC0000062 VLP0323A601R COIL 4 J0JCC0000062 J0JHC0000045 VLP0323A601R COIL COIL 1 2 J0JCC0000062 VLP0323A601R J0JHC0000045 J0JHC0000045 J0JHC0000045 COIL COIL COIL COIL 1 1 1 1 AN78L05ME1 MA3J142E0L B0JCPE000004 MA3J142E0L C0ABBB000104 C0ABBA000084 67 J0JCC0000062 G1C150M00009 J0JCC0000062 J0JCC0000062 G1C220M00012 J0JCC0000062 J0JCC0000062 J0JCC0000062 J0JCC0000062 DVD-LS90PP / DVD-LS93P Ref. Part No. No. LB8801- ERJ3GEY0R00 07 LB8808- J0JHC0000045 11 Part Name & Description 1/10W 0 P1902 K1KA02B00123 CONNECTOR(2P) 1 PC1 PC1 PC2 PC3 PC4 PC5 RPK2302 RPK2306 RPQ1954 RPQ1955 RPQF0277 RPFC0031-B PACKING CASE PACKING CASE QOO PACK PAD ACCESSORY BOX POLYETHYLENE BAG(UNIT) 1 1 1 1 1 1 COIL Pcs Remarks Ref. No. R1040 R1044,4 5 R1060 R1061 R1063 R1064 R1102 R1103 R1104 R1105 R1106,0 7 R1401 R1406 R1407 R1410,1 1 R1412 R1413 R1414,1 5 R1416 R1418 R1621 R1622 R162325 R1626 R1627 R1628 R1629 R1630 R1632 R1633 R1635 R1638 R1643 R1901 R1902 R1903,0 4 R1905 R1907 R1908 R1909 R1910 R1911 R1912 R1913,1 4 R1915 R1916 R1917 R1919 R2002,0 3 R2004 R2005 R2006 R2501 R2523 R2651 R2652 R2653 R3001 R3002 R3003 R3004 R300507 R3008 R3010 R3011 R3012 7 4 (LS90PP) (LS93P) Q100103 Q1101 Q1402 Q1412 Q1621 Q1622 Q1901 Q4001,0 2 Q5201,0 2 Q5211 Q5215 Q8001 Q8002 Q8201 Q8401 Q8406 B1DHCD000023 TRANSISTOR 3 B1BBCF000026 XP132A1545SR 2SB1218ARL B1BBCF000031 B1CFHA000002 B1DFDF000001 2SD1819AWL TRANSISTOR IC TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR 1 1 1 1 1 1 2 2SD1819AWL TRANSISTOR 2 B1ADPC000004 B1ADPC000004 2SB1218ARL XP4501TX XP4501TX XN4601TX XN4601TX TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR 1 1 1 1 1 1 1 XP0450100L XP0450100L XN0460100L XN0460100L QR1007, 08 QR1402 QR1411 QR1413 QR1601 QR4001 QR4002, 03 QR4004, 05 QR4006, 07 QR4008 QR4009 QR401113 QR5221 UN5213TX TRANSISTOR 2 UNR521300L UN5213TX B1ZBZ0000049 B1GDCFJN0011 XP0121300L UN5213TX B1GDCFJN0011 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR 1 1 1 1 1 2 UNR521300L XP0121300L TRANSISTOR 2 B1GDCFJN0011 TRANSISTOR 2 UN5213TX XP0121300L B1GFGCAA0001 TRANSISTOR TRANSISTOR TRANSISTOR 1 1 3 UNR212100L TRANSISTOR 1 R1005 R1006 R1014 R1015 R1016 R1018 R1019 R1020 R1022 R1023 R1027,2 8 R1029 R1030 R1032 R1033 R1034 R1035 R1037 R1038 R1039 ERJ3RBD103 ERJ3RBD563V ERJ3RBD103 ERJ3GEYJ333 ERJ3GEYJ183V ERJ3GEYJ822 ERJ3GEYJ472 ERJ3GEYJ272 ERJ3RBD123 ERJ3GEYJ333 ERA3YED332 1/16W 1/16W 1/16W 1/10W 1/10W 1/10W 1/10W 1/10W 1/16W 1/10W 1/16W 10K 56K 10K 33K 18K 8.2K 4.7K 2.7K 12K 33K 3.3K 1 1 1 1 1 1 1 1 1 1 2 ERJ3RBD333 ERJ3GEYJ183V ERJ3RBD183 ERJ3RBD102 ERJ3RBD822 ERJ3GEYJ331 ERJ3RBD393 ERJ3RBD102 ERJ3RBD822 1/16W 1/10W 1/16W 1/16W 1/10W 1/10W 1/16W 1/16W 1/10W 33K 18K 18K 1K 8.2K 330 39K 1K 8.2K 1 1 1 1 1 1 1 1 1 B1DHFD000008 UNR521300L UNR521300L D0GB183JA002 D0GB183JA002 68 Part No. ERJ3RBD122 ERJ3GEYJ102V Part Name & Description 1/16W 1.2K 1/10W 1K ERJ3GEYJ151V ERJ3GEYJ822 ERJ3RBD123 ERJ3RBD333 ERJ3RBD683 ERJ3RBD102 ERJ3RBD103 ERJ3GEYJ561 ERJ3GEYJ220 1/10W 1/10W 1/16W 1/16W 1/16W 1/16W 1/16W 1/10W 1/10W 150 8.2K 12K 33K 68K 1K 10K 560 22 1 1 1 1 1 1 1 1 2 ERJ3GEYJ223 ERJ3RBD223 ERA3YED332 ERJ3GEYJ103V 1/10W 1/16W 1/16W 1/10W 22K 22K 3.3K 10K 1 1 1 2 D0GB103JA002 ERJ3GEYJ104 ERJ3GEYJ223 ERJ3GEYJ103V 1/10W 100K 1/10W 22K 1/10W 10K 1 1 2 D0GB103JA002 ERJ3GEYJ473V ERJ3GEYJ105V D1BFR470A007 ERJ3RBD103 ERJ3RBD104 1/10W 47K 1/10W 1M 1/2W 0.47 1/16W 10K 1/16W 100K 1 1 1 1 3 ERJ3RBD103 ERJ3RBD104 ERJ3RBD223 ERJ3RBD104 ERJ3GEYJ123V ERJ3RBD103 ERJ3GEYJ102V ERJ3GEYJ473V ERJ3GEYJ102V ERJ3GEYJ103V ERJ3RBD563V ERJ3RBD623 ERJ3GEYJ104 1/16W 1/16W 1/16W 1/16W 1/10W 1/16W 1/10W 1/10W 1/10W 1/10W 1/16W 1/16W 1/10W 10K 100K 22K 100K 12K 10K 1K 47K 1K 10K 56K 6.2K 100K 1 1 1 1 1 1 1 1 1 1 1 1 2 ERJ3GEYJ102V ERJ3GEYJ334 ERJ3GEYJ224 ERJ3GEYJ123V ERJ3RBD471 ERJ3GEYJ393 ERJ3GEYJ221 ERJ3GEY0R00 1/10W 1/10W 1/10W 1/10W 1/16W 1/10W 1/10W 1/10W 1K 330K 220K 12K 470 39K 220 0 1 1 1 1 1 1 1 2 ERJ3GEYJ220 ERJ3GEYJ392 ERJ3GEYJ563 ERJ3RED274 ERJ3GEYJ103V 1/10W 1/10W 1/10W 1/16W 1/10W 22 3.9K 56K 270K 10K 1 1 1 1 2 ERJ3GEYJ333 ERJ3GEYJ182V ERJ3GEY0R00 ERJ3GEYJ471 ERJ3GEYJ473V ERJ3GEYJ471 ERJ12RQJR68U ERJ3GEYD153V ERJ3GEYJ680 ERJ3GEYJ220 ERJ3GEYJ330 ERJ3GEYJ331 ERJ3GEYJ471 1/10W 33K 1/10W 1.8K 1/10W 0 1/10W 470 1/10W 47K 1/10W 470 1/2W 68 1/10W 15K 1/10W 68 1/10W 22 1/10W 33 1/10W 330 1/10W 470 1 1 1 1 1 1 1 1 1 1 1 1 3 ERJ3GEYJ220 ERJ3GEY0R00 ERJ3GEYJ473V ERJ3GEYJ221 1/10W 1/10W 1/10W 1/10W 1 1 1 1 22 0 47K 220 Pcs Remarks 1 2 D0GB473JA002 D0GB473JA002 D0GB103JA002 D0GB334JA002 D0GB103JA002 D0GB473JA002 D0HB153ZA002 ERJ3GEYJ680V D0GB473JA002 DVD-LS90PP / DVD-LS93P Ref. No. R3013 R3014 R3015 R3101 R3102 R3103 R3104 R3105 R3106 R3107 R3108 R3109 R3110,1 1 R3203 R3205 R3232,3 3 R3251 R3261 R4001,0 2 R4003,0 4 R4005,0 6 R4007 R4008 R4009,1 0 R4011,1 2 R4013,1 4 R4015,1 6 R4017,1 8 R4019,2 0 R4021,2 2 R4023,2 4 R4025,2 6 R4027,2 8 R4030 R4031 R4032 R4033,3 4 R4035,3 6 R4037,3 8 R4039 R4040 R4041,4 2 R4043 R4044 R4045 R4046 R4047 R4063,6 4 R4065,6 6 R4067,6 8 R4069 R5201 R5203 R5204,0 5 Part No. ERJ3GEYJ105V ERJ3GEYJ271 ERJ3GEY0R00 ERJ3RBD333 ERJ3RBD152 ERJ3RBD222 ERJ3RBD151V ERJ3GEYJ4R7 ERJ3RBD151V ERJ3GEYJ120V ERJ3RBD151V ERJ3GEYJ180V ERJ3RED820V Part Name & Description 1/10W 1M 1/10W 270 1/10W 0 1/16W 33K 1/16W 1.5K 1/16W 2.2K 1/16W 150 1/10W 4.7 1/16W 150 1/10W 12 1/16W 150 1/10W 18 1/16W 82 ERJ3RED750V ERJ3GEYJ102V ERJ3GEYJ223 1/16W 75 1/10W 1K 1/10W 22K 1 1 2 ERJ3GEYJ681 ERJ3GEYJ681 ERJ3GEYJ273 1/10W 680 1/10W 680 1/10W 27K 1 1 2 ERJ3GEYJ333 1/10W 33K 2 ERJ3GEYJ100 1/10W 10 2 ERJ3GEYJ104 ERJ3GEYJ102V ERJ3GEYJ473V 1/10W 100K 1/10W 1K 1/10W 47K 1 1 2 D0GB473JA002 ERJ3GEYJ101 1/10W 100 2 D0GB101JA002 ERJ3GEYJ332 1/10W 3.3K 2 ERJ3GEYJ563 1/10W 56K 2 ERJ3GEYD153V 1/10W 15K 2 D0HB153ZA002 ERJ3GEYJ103V 1/10W 10K 2 D0GB103JA002 ERJ8GEYJ1R5 1/8W 1.5 2 ERJ3GEYJ152V 1/10W 1.5K 2 ERJ3GEYJ472 1/10W 4.7K 2 ERJ3GEYJ223 1/10W 22K 2 ERJ3GEYJ473V ERJ3GEYJ222 ERJ3GEYJ102V ERJ3GEYJ103V 1/10W 1/10W 1/10W 1/10W 47K 2.2K 1K 10K 1 1 1 2 ERJ3GEYJ562 1/10W 5.6K 2 ERJ3GEYJ103V 1/10W 10K 2 ERJ3GEYJ104 ERJ3GEY0R00 ERJ3GEYJ821 1/10W 100K 1/10W 0 1/10W 820 1 1 2 ERJ3GEYJ333 ERJ3GEYJ223 ERJ3GEYJ103V ERJ3GEYJ223 ERJ3GEYJ333 ERJ8GEYJ1R5 1/10W 33K 1/10W 22K 1/10W 10K 1/10W 22K 1/10W 33K 1/8W 1.5 1 1 1 1 1 2 ERJ3GEYJ152V 1/10W 1.5K 2 ERJ3GEYJ472 1/10W 4.7K 2 ERJ3GEYJ473V ERJ3GEYJ223 ERJ3GEYJ333 ERJ3GEYJ102V 1/10W 1/10W 1/10W 1/10W 1 1 1 2 47K 22K 33K 1K Pcs 1 1 1 1 1 1 1 1 1 1 1 1 2 Remarks Ref. No. R5208,0 9 R5210 R5211 R5212 R5213 R5214 R5215 R5216 R5217 R5218 R5219,2 0 R5221 R5224,2 5 R6001 R6006 R6007 R6008 R6009 R6012 R6013 R6015 R601618 R6023 R6025 R6026 R6027 R6041 R6201 R6351 R6801 R6802 R6803 R6804 R6805 R6806 R6807 R6808 R6809 R6813 R6814 R6815 R6816 R6817 R6818 R6819 R6820 R8002 R800608 R8009 R8010 R801113 R8014 R8015 R8039,4 0 R8042 R8045 R8046 R8047 R8048 R8049 R8203 R8205 R8209,1 0 R821214 R8218 R8219 D0GB4R7JA002 D0GB473JA002 D0GB103JA002 D0GB103JA002 D0GB103JA002 D0GB473JA002 69 Part No. ERJ3GEYJ331 Part Name & Description 1/10W 330 ERJ3GEYJ100 ERJ3GEYJ2R2 ERJ12YJ270 ERJ3GEYJ473V ERJ3GEYD153V ERJ3GEYJ2R2 ERJ12YJ270 ERJ3GEYJ473V ERJ3GEYJ100 ERJ3RED910 1/10W 10 1/10W 2.2 1/2W 27 1/10W 47K 1/10W 15K 1/10W 2.2 1/2W 27 1/10W 47K 1/10W 10 1/16W 91 1 1 1 1 1 1 1 1 1 2 ERJ3GEYJ102V ERJ3GEY0R00 1/10W 1K 1/10W 0 1 2 ERJ3RBD123 ERJ3GEYJ821 ERJ3GEYJ102V ERJ3GEYJ122 ERJ3RBD333 ERJ3RBD333 ERJ3GEY0R00 ERJ3GEYJ561 ERJ3GEY0R00 1/16W 1/10W 1/10W 1/10W 1/16W 1/16W 1/10W 1/10W 1/10W 12K 820 1K 1.2K 33K 33K 0 560 0 1 1 1 1 1 1 1 1 3 ERJ3RBD103 ERJ3GEYJ273 ERJ3GEYJ104 ERJ3GEYJ221 ERJ3GEYJ331 ERJ3GEYJ102V ERJ3GEYJ331 ERJ3GEYJ122 ERJ3GEYJ152V ERJ3GEYJ182V ERJ3GEYJ222 ERJ3GEYJ332 ERJ3GEYJ472 ERJ3GEYJ682 ERJ3GEYJ123V ERJ3GEYJ223 ERJ3GEYJ152V ERJ3GEYJ182V ERJ3GEYJ222 ERJ3GEYJ332 ERJ3GEYJ472 ERJ3GEYJ821 ERJ3GEYJ102V ERJ3GEYJ220 ERJ3GEYJ472 ERJ3GEYJ101 1/16W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 10K 27K 100K 220 330 1K 330 1.2K 1.5K 1.8K 2.2K 3.3K 4.7K 6.8K 12K 22K 1.5K 1.8K 2.2K 3.3K 4.7K 820 1K 22 4.7K 100 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 3 D0GB101JA002 ERJ3GEYJ105V ERJ3GEYJ332 ERJ3GEYJ103V 1/10W 1M 1/10W 3.3K 1/10W 10K 1 1 3 D0GB103JA002 ERJ3GEYJ562 ERJ3GEYJ392 ERJ3GEYJ102V 1/10W 5.6K 1/10W 3.9K 1/10W 1K 1 1 2 ERJ3GEYJ102V ERJ3GEYJ561 ERJ3GEYJ333 ERJ3GEYJ273 ERJ3GEYJ473V ERJ3GEYJ102V ERJ3GEYJ472 ERJ3GEYJ102V ERJ3GEYJ102V 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1 1 1 1 1 1 1 1 2 ERJ3GEYJ102V 1/10W 1K 3 ERJ3GEYJ102V ERJ3GEYJ101 1/10W 1K 1/10W 100 1 1 1K 560 33K 27K 47K 1K 4.7K 1K 1K Pcs Remarks 2 D0GB473JA002 D0HB153ZA002 D0GB473JA002 D0GB473JA002 D0GB101JA002 DVD-LS90PP / DVD-LS93P Ref. No. R8221 R8222 R8223 R8225 R8226 R8227 R8232,3 3 R823638 R8241 R8243 R8245 R8250,5 1 R8252 R8253 R8255 R8256 R8257 R8258 R8401 R8402 R8403 R8404 R8405,0 6 R8407 R8408 R8409 R8410 R8411 R8413 R8425 R8428,2 9 R8430 R8433 R8605 R8606 R8607 R8608 R8609 R8610 R8611 R8612 R8613 R8614,1 5 R8616 R8801 R8802 R8803 R8804 R8805 Part No. ERJ3GEYJ151V ERJ3GEYJ101 ERJ3GEYJ820 ERJ3GEYJ332 ERJ3GEYJ222 ERJ3GEYJ273 ERJ3GEY0R00 Part Name & Description 1/10W 150 1/10W 100 1/10W 82 1/10W 3.3K 1/10W 2.2K 1/10W 27K 1/10W 0 Pcs ERJ3GEY0R00 1/10W 0 3 ERJ3GEY0R00 ERJ3GEY0R00 ERJ3GEY0R00 ERJ3GEYJ393 1/10W 1/10W 1/10W 1/10W 0 0 0 39K 1 1 1 2 ERJ3GEYJ823 ERJ3GEY0R00 ERJ3GEYJ823 ERJ3GEYJ332 ERJ3GEYJ152V ERJ3GEYJ103V ERJ3GEYJ223 ERJ3GEYJ184V ERJ3GEYJ473V ERJ3GEYD153V ERJ3GEYJ563 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 82K 0 82K 3.3K 1.5K 10K 22K 180K 47K 15K 56K 1 1 1 1 1 1 1 1 1 1 2 ERJ3GEYJ223 ERJ3GEYJ103V ERJ3GEYJ183V ERJ3GEYJ103V ERJ3GEYJ472 ERJ3GEYJ333 ERJ3GEYJ470 ERJ3GEYJ123V 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 22K 10K 18K 10K 4.7K 33K 47 12K 1 1 1 1 1 1 1 2 ERJ3GEYJ470 ERJ3GEY0R00 ERJ3GEYJ103V ERJ3GEYJ105V ERJ3GEYJ683 ERJ3GEYJ103V ERJ3GEYJ473V ERJ3GEYJ683 ERJ3GEYJ223 ERJ3GEYJ103V ERJ3GEYJ563 ERJ3GEYJ103V 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 47 0 10K 1M 68K 10K 47K 68K 22K 10K 56K 10K 1 1 1 1 1 1 1 1 1 1 1 2 ERJ3GEYJ474 ERJ3GEYJ223 ERJ3GEYJ333 ERJ3GEYJ223 ERJ3GEYJ333 ERJ3GEY0R00 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 470K 22K 33K 22K 33K 0 1 1 1 1 1 1 RX2651 RX3001 RX3003 RX3007 RX6001, 02 RX6351 EXB28V103JX EXB28V103JX D1H84724A024 EXB28V103JX EXB28V103JX RESISTOR-RESISTOR RESISTOR-RESISTOR RESISTOR-RESISTOR RESISTOR-RESISTOR RESISTOR-RESISTOR 1 1 1 1 2 D1H84724A024 RESISTOR-RESISTOR 1 S5201 S5202 S6003 S6018 S6019 S6020 S6802 S6803 S6804 S6805 ESE11MV9T ESE11MV9T ESE11MV9T K0H1BA000432 K0H1BA000432 K0H1BA000432 K0H1BA000432 K0H1BA000432 K0H1BA000432 K0H1BA000432 SWITCH SWITCH SWITCH SWITCH SWITCH SWITCH SWITCH SWITCH SWITCH SWITCH 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 Remarks D0GB101JA002 Ref. No. S6806 S6807 S6808 S6809 S6810 S6811 S6812 S6813 S6814 S6815 S6816 S6817 S6818 Part No. K0H1BA000432 K0H1BA000432 K0H1BA000432 K0H1BA000432 K0H1BA000432 K0H1BA000432 K0H1BA000432 K0H1BA000432 K0H1BA000432 K0H1BA000432 K0H1BA000432 K0H1BA000432 K0H1BA000432 Part Name & Description SWITCH SWITCH SWITCH SWITCH SWITCH SWITCH SWITCH SWITCH SWITCH SWITCH SWITCH SWITCH SWITCH Pcs Remarks T1101 T1901 G5ZZ00000071 ETJV15ZE1KAB TRANSFORMER TRANSFORMER 1 1 TH1634 TH6040 VRT0139J103 VRT0139J103 THERMISTOR THERMISTOR 1 1 D4CC11030005 D4CC11030005 X3001 X6001 H0J270500080 RSXY8M00M07T CRYSTAL OSCILLATOR CERAMIC OSCILLATOR 1 1 H2D800400005 1 1 1 1 1 1 1 1 1 1 1 1 1 D0GB103JA002 D0GB473JA002 D0HB153ZA002 D0GB103JA002 D0GB183JA002 D0GB103JA002 D0GB103JA002 D0GB103JA002 D0GB473JA002 D0GB103JA002 D0GB103JA002 70 HP050300000HP