TotalObserver WCX Plugin for Total Commander Copyright: 2016, Egor Vlaznev ------------------------------------------------------------------- 1. General information. This plug-in assists in listing and extracting content from several types of containers. This plug-in uses modules from Observer Plug-in for FAR Manager Copyright: 2009-2015, Ariman 1.1. Supported formats: - Installation packages - MSI packages for Windows Installer - Installation packages made with Wise Installer - Install Shield packages. - Setup Factory packages. - Create Install(gentee) packages. - Images of the optical disc (CD/DVD/Blu-ray) - ISO-images. Following formats are supported: - ISO-9660 (incl. Joliet, RockRidge) - UDF (ISO 13346) up to revision 2.60 - NRG-images Nero Burning ROM - BIN-images CDRWIN (CUE/BIN) - MDF-images Alcohol 120% (MDF/MDS) - ISZ-images UltraISO - MIME - MIME containers (.eml, .mht, etc.) - MS Outlook databases (*.pst) - MBox containers - The Bat! databases (*.tbb) - Containers used in various games - CAT, PCK, PBD, PBB - used by Egosoft for X-series games - VP - Volition Pack V2 (from FreeSpace 1/2/Open) - BIG, SGA - containers from games made by Relic (Homeworld 1/2, CoH, WH40k DoW 1/2) - GCF, WAD, XZP, PAK, BSP, VBSP - used inside Steam - MoPaQ packages (used by Blizzard) - Other - Embedded files from PDF. 1.2. Settings. Main plugin options are in [General] section. Settings for each individual module will reside with section with module name. Currently you can configure following options: 1.2.1 General settings. [General] -> VerboseModuleLoad Turns on/off warning message on plugin start if any if the modules failed to load. Possible values: 1 (show message) or 0 (don't show). [General] -> UseExtensionFilters Enable/disable using of extesion filters (see 1.2.2). Possible values: 1 (enable) or 0 (disable). 1.2.2 Filters. [Filters] This section sets file extention masks for modules to speed up files processing. Filters are used when entering file by Enter or Ctrl-PgDn keys. Values are set in following format: ModuleName=.ext1;.ext2;.ext3 Module names are from [Modules] section and case sensitive. Extentions in list are seprated by semicolon and have dot in front. They are case-insensitive. If any module don't have filters set or extentions list is empty, then it is considered that module accepts all files. 1.2.3 Module-specific configuration. Values marked with * are default values. [ISO] -> Charset [ISO] -> RockRidge Enables (1)* / disables (0) support for RockRidge extension. [PST] -> HideEmptyFolder Enables (1) / disables (0)* hiding of empty folders. 2. System requirements. OS: WinXP or higher. MSI module requires Windows Installer 4+