Packing of 1000mm Gauge Concrete Sleeper 1000mm gauge concrete sleepers are tied up in bundles of twenty using flat steel belt. Each layer contains 4 sleepers, and 5 layers are bundled together as a packaging unit. Between every two layers there are 2 rectangular wood (L*W*H =1050mm*55mm* 40mm), and every two sleepers of the same layer are separated by two wedge blocks.Polyethylene plastic gasket is placed in order to prevent the friction between the sleepers and steel belt. A groove in the pallet timber will be excavated, so that the steel belt can be embedded in the timber. Figure 1 Front view (1000mm Gauge) No. Gauge Figure 2 Side view (1000mm Gauge) 1000mm 1 Bundling mode: 4*5 2 Gross weight: about 4.7 t 3 Size of pallet (L*W*H): 1200mm*1080mm*120mm 4 Size of rectangular wood (L*W*H) 1050mm*55mm*40mm 5 Size of packing unit (L*W*H): 2000mm*1080mm*1302mm 6 Hoisting method: Soft nylon sling/ Forklift transportation Note: 1/3 i. All of the wood is required to fumigation treatment, and every piece of wood needs to be stamped with IPPC fumigation sign. ii. Stacking more than 15 sleepers at a time is not allowed.Relevant operation must meet the requirements of Norms ALAF 5-022 and AREMA Chapter 30 Section 4.11 when the sleepers are shipping, storage, transportation, handling and application. The photo of actual packaging-1000mm gauge 2/3 3/3