core winding1

Valco Melton
Gluing & Quality Assurance Systems
Core Winding Glue Systems
for Spiral Wound Tubes
®
Sales/Ordering Guide
Table of Contents
Introduction.....................................................................................................................1
CORE WINDING BRACKET OPTIONS
Core Winder Bracket .......................................................................................................3
VALVE & APPLICATOR OPTIONS
369 Valve, 4-inch .............................................................................................................7
369 Valve, 8-inch .............................................................................................................7
Low Pressure Valve Support Equipment ..........................................................................8
Low Pressure Valve Components.....................................................................................9
08HP Valve ....................................................................................................................11
High Pressure Valve Components ..................................................................................12
CONTROL OPTIONS
MCP-4 Control ...............................................................................................................13
FLUID HANDLING SYSTEM
Pumping System Options...............................................................................................15
SYSTEM STANDS
Bottom-Up & Top-Down Configurations..........................................................................21
WEB TENSIONER/WEB SCRAPER OPTIONS
Web Tensioner...............................................................................................................27
Web Scraper .................................................................................................................27
WEB OILER OPTION
Web Oiler ......................................................................................................................32
WEB BREAK DETECTION OPTION
Web Break Detection .....................................................................................................34
HETADE HOSE OPTION
Heated Hose..................................................................................................................35
SAMPLE SYSTEMS
4-inc Web, Top-Down Gluing, Low-Pressure, Sample System .........................................36
8-inch Web, Bottom-Up Gluing, High-Pressure, Sample System......................................37
SPECIALS
Specials ........................................................................................................................38
Valco Melton
VALCO MELTON • 411 Circle Freeway Dr • Cincinnati • 45246 • USA
Tel: 513.874.6550 • Fax: 513.874.3612
info@valcomelton.com • www.valcomelton.com
© Valco Cincinnati, Inc. All Rights Reserved.
This information is provided specifically for Valco Cincinnati employees, representatives, and agents. No part of this catalog may be
reproduced or transmitted, in any form or by any means, without the prior written permission of Valco Cincinnati, Inc.
Written and designed at Valco Cincinnati, Inc., 411 Circle Freeway Drive, Cincinnati, OH 45246.
Core Winding Glue Systems
for Spiral Wound Fiber Tubes
Core Winding Glue System
Valco Melton Core Winding System
Mandrel
Core Winding Machine
Tension accumulator
Unwind stand
The core winding system delivers a completely enclosed application solution for manufacturing spiral-wound
cores. The system offers easy installation and is designed to produce a higher quality product, reduce glue
usage, eliminate glue slinging and minimize cleanup.
Core Winder Selection Guide
Components needed to build a core winder system:
Typical system options
Core winder bracket
MCP-4 control
Fluid handling system
Heated Hose
Glue valve w/ head
System stand
Web break sensor
Valve support equipment
Web tensioner
Web oiler
© Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA
Tel: 513.874.6550 • Fax: 513.874.3612 • info@valcomelton.com • www.valcomelton.com
1
Core Winding Glue Systems
for Spiral Wound Fiber Tubes
Typical system layout
© Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA
Tel: 513.874.6550 • Fax: 513.874.3612 • info@valcomelton.com • www.valcomelton.com
2
Core Winding Bracket Options
Core Winder Bracket
582xx822
583xx003
SMT4512
• Actuator lifts applicator from paper web as soon as machine stops.
• Micro-adjustment vertical, horizontal and angle for proper head contact.
• Even coating at all machine speeds
Core Winder Bracket
PN
DESCRIPTION
583xx003
Standard core winder base bracket. 4 inch wide paper max.
582xx822
Core winder bracket w/ bottom slides (old style). Slides allow the bracket to float with the paper. 4
inch wide paper max. Glides on low friction linear bearings to follow “walking” paper.
Spring-loaded-to-center bracket dampens sudden forces and re-aligns to center.
SMT4512
Heavy duty 8 inch core winder bracket 8 inch wide paper max.
Note: 8 in. core winder bracket will not mount to standard system stands, larger stands required.
© Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA
Tel: 513.874.6550 • Fax: 513.874.3612 • info@valcomelton.com • www.valcomelton.com
3
Core Winding Bracket Options
583xx003
© Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA
Tel: 513.874.6550 • Fax: 513.874.3612 • info@valcomelton.com • www.valcomelton.com
4
Core Winding Bracket Options
582xx822
© Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA
Tel: 513.874.6550 • Fax: 513.874.3612 • info@valcomelton.com • www.valcomelton.com
5
Core Winding Bracket Options
REED SWITCH ASSEMBLY
24.0
[610 mm]
REED SWITCH PROVIDED
WITH ITEM # 22
.75 [19.1 mm]
.18 [4.6 mm]
PIN 3 = BLACK WIRE
PIN 4 = RED WIRE
EXPLODED VIEW
ADJUSTMENT SECTION
SMT4512
© Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA
Tel: 513.874.6550 • Fax: 513.874.3612 • info@valcomelton.com • www.valcomelton.com
6
Valve & Applicator Options
369 Series Valve & Applicator
Low pressure application 369 valve 100 psi fluid pressure max.
Core Winder Valve and Applicator Head, 369 valve, 4-inch
PN
DESCRIPTION
SMT4615
369 valve w/ head, 4-inch max paper width
708xx780
4-inch replacement head, hardened 440C Stainless
4-in. blank pattern shims. Shims to be cut at application. Stainless steel
708xx549
Pattern shim - .004 thk.
708xx548
Pattern shim - .006 thk.
708xx739
Pattern shim - .008 thk.
708xx611
Pattern shim - .010 thk. standard
Core Winder Valve and Applicator Head, 369 valve, 8-inch
PN
DESCRIPTION
SMT4516
Dual 369 valve w/ head 8- inch max paper width
SMT3517
8-inch replacement head, hardened 440C Stainless
8-inch blank pattern shims. Shims to be cut at application. Stainless steel
709xx742
Pattern shim - .004 thk.
708xx746
Pattern shim - .006 thk.
709xx740
Pattern shim - .008 thk.
708xx745
Pattern shim - .010 thk. standard
© Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA
Tel: 513.874.6550 • Fax: 513.874.3612 • info@valcomelton.com • www.valcomelton.com
7
Valve & Applicator Options
Low Pressure Valve Support Equipment
Low pressure valve support equipment required with low pressure 369 valve only.
Low Pressure Valve Support Equipment
PN
DESCRIPTION
782xx072
369 valve support equipment w/ 832 fluid regulator
782xx105
369 valve support equipment w/ proportional regulator
Support equipment for the high pressure 08HP valve is included with the high pressure pumping system.
© Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA
Tel: 513.874.6550 • Fax: 513.874.3612 • info@valcomelton.com • www.valcomelton.com
8
Low Pressure Valve Components
Low Pressure Valve Components - 4-inch
ITEM
PN
DESCRIPTION
1
706xx177
Screw,Stem Assy
2
706xx100
Diaphragm
3
706xx101
Diaphragm Protector
4
706xx175
Stem Top
5
745xx098
O'Ring
6
706xx176
Stem Bottom
7
745xx066
O'ring
8
706xx102
Spring
9
411xx792
Mac Valve
10
797xx725
Half Union,6mm Tube X 1/8m-UNI
11
753xx364
Manifold, Air
12
798xx180
SHCS - M3 X 30mm, SS
13
706xx206
Mounting stud
14
798xx362
Nut,Hex, M8, Ss
15
798xx360
Lockwasher, S.S., 8mm
16
703xx944
Valve body
17
SMT4495
Manifold-slot Coater
18
793xx470
Washer, Copper
19
792xx135
Adapter; 1/8NPT X 1/8BSPP-SS
20
784XX409
SHCS M5 X 25 SS
21
708XX780
Assy-blade seT,4.0 pattern
22
745xx104
O'Ring
24
798xx194
SHCS - M5 X 14MM, S.S.
25
797xx005
Street elbow-90 F-M 1/8 X 1/8
26
750xx001
Swivel FTG. - female
27
708XX611
Shim, 0.010 thick, Stainless
28
030xx773
Cable assy, M12
29
075xx302
Ferrule;INS,22AWG,8MM
© Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA
Tel: 513.874.6550 • Fax: 513.874.3612 • info@valcomelton.com • www.valcomelton.com
9
Low Pressure Valve Components
Low Pressure Valve Components - 8-inch
© Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA
Tel: 513.874.6550 • Fax: 513.874.3612 • info@valcomelton.com • www.valcomelton.com
10
Valve & Applicator Options
08HP Series Valve & Applicator
High pressure application 08HP valve, for pressures in excess of 100 psi
Core Winder Valve and Applicator Head, 08HP valve, 4-inch
PN
DESCRIPTION
708xx782
O8HP valve w/ head 4 in. wide paper max.
708xx780
4-inch replacement head, hardened 440C stainless
4-in. blank pattern shims. Shims to be cut at application. Stainless steel
708xx549
Pattern shim - .004 thk.
708xx548
Pattern shim - .006 thk.
708xx739
Pattern shim - .008 thk.
708xx611
Pattern shim - .010 thk.
© Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA
Tel: 513.874.6550 • Fax: 513.874.3612 • info@valcomelton.com • www.valcomelton.com
11
High Pressure Valve Components
High Pressure Valve Components - 4-inch
ITEM
1
PN
703xx907
DESCRIPTION
08HP vaslve assembly
3
792xx136
1/8 BSPP x 9-16-18 JIC
4
709xx519
Manifold, block nozzle
5
708xx780
Assembly, blade set
6
794xx877
Clamp
7
798xx152
SHCS, M6 x 12 SS
8
784xx442
SHCS M8 x 20 SS
9
784xx097
Flat washer, M8
10
798xx360
Lockwasher, 8mm, SS
11
745xx104
O-ring
12
784xx409
SHCS M5 x 25 SS
14
798xx194
SHCS M5 x 14 SS
15
750xx001
Swivel fitting, female
16
750xx009
Male swivel
17
411xx118
3-way valve assembly, 24V
18
799xx542
1/8 NPT x 5/16 tube
© Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA
Tel: 513.874.6550 • Fax: 513.874.3612 • info@valcomelton.com • www.valcomelton.com
12
Control Options
MCP-4 Control
The MCP-4 control is used with the core winder system (except for new OEM machines).
Control System Components
PN
DESCRIPTION
074xx038
MCP-4 Control
155xx341
Encoder kit. Includes VDD-1000 encoder, bracket arm and measuring wheel
Encoder cable option (used with Valco system stands)s:
030xx632
Encoder cable, 8m
030xx630
Encoder cable, 2m
Switch box option: The switch box is used to raise & lower the head for gluing. The switch box is not needed if the
machine already has a switch left over from the old glue pot.
098xx089
Switch box
For systems with existing switch box use a 030xx555, 8 meter scanner cable to wire existing switch (used as
the web break input).
© Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA
Tel: 513.874.6550 • Fax: 513.874.3612 • info@valcomelton.com • www.valcomelton.com
13
Control Options
MCP-4 connections
Valve Cables
PN
DESCRIPTION
030xx623
Valve cable 1 meter lg. (top down gluing)
030xx624
Valve cable 2 meter lg. (bottom up gluing)
Note: Valve cables 2 required - 3 if web tensioner is used
Scanner Cables (1 required)
PN
DESCRIPTION
030xx592
Scanner cable 1 meter lg. (top down glueing)
030xx593
Scanner cable 2 meter lg. (bottom up gluing)
© Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA
Tel: 513.874.6550 • Fax: 513.874.3612 • info@valcomelton.com • www.valcomelton.com
14
Fluid Handling System
Fluid Handling System
Some plants have their own pumping system. In this case the fluid handling system is not needed.
Pumping System Options
PN
DESCRIPTION
561xx175
Fluid handling system, low pressure, 100 psi max. Includes DD-1 pump, hoses, cables and
bracket
579xx393
Fluid handling system, high pressure, over 100 psi. Includes EPP6 pump, 3:1 regulator, hoses,
cables and bracket
Optional Low Level Detection
PN
738xx001
DESCRIPTION
Low level detection/alarm package
© Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA
Tel: 513.874.6550 • Fax: 513.874.3612 • info@valcomelton.com • www.valcomelton.com
15
Fluid Handling System
561xx175
© Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA
Tel: 513.874.6550 • Fax: 513.874.3612 • info@valcomelton.com • www.valcomelton.com
16
Fluid Handling System
579xx393
© Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA
Tel: 513.874.6550 • Fax: 513.874.3612 • info@valcomelton.com • www.valcomelton.com
17
Fluid Handling System
738xx001
© Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA
Tel: 513.874.6550 • Fax: 513.874.3612 • info@valcomelton.com • www.valcomelton.com
18
Fluid Handling System
Typical system with EPP6 pump
© Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA
Tel: 513.874.6550 • Fax: 513.874.3612 • info@valcomelton.com • www.valcomelton.com
19
Fluid Handling System
Typical system with DD-1 pump
© Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA
Tel: 513.874.6550 • Fax: 513.874.3612 • info@valcomelton.com • www.valcomelton.com
20
System Stands
System stands
System stands feature mounting for all Valco system components, including applicator assembly, control,
encoder, web sensor, fluid regulator and pump.
Bottom-Up And Top-Down Configurations
PAPER WRAP FOR BOTTOM UP GLUING
PAPER WRAP FOR TOP DOWN GLUING
Top down gluing
Bottom up gluing
MA
N
EL
DR
MA
ND
L
RE
Bottom up gluing is used when
the web wraps around the
mandrel from the bottom side.
(Example: Perini machine)
Top down gluing is used when
the web wraps around the
mandrel from the top side
(Example: PCMC & Ronco
Machines)
© Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA
Tel: 513.874.6550 • Fax: 513.874.3612 • info@valcomelton.com • www.valcomelton.com
21
System Stands
582xx814
System Stand, Bottom-Up Gluing
PN
582xx814
DESCRIPTION
Bottom-up gluing system stand, 4-inch paper width
See typical system illustrations, pages 25 and 26.
© Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA
Tel: 513.874.6550 • Fax: 513.874.3612 • info@valcomelton.com • www.valcomelton.com
22
System Stands
PDM0145
System Stand, Bottom-Up Gluing
PN
PDM0145
DESCRIPTION
Bottom-up gluing system stand, 8-inch paper width
See typical system illustrations, pages 25 and 26.
© Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA
Tel: 513.874.6550 • Fax: 513.874.3612 • info@valcomelton.com • www.valcomelton.com
23
System Stands
582xx582
System Stand, Top-Down Gluing
PN
582xx852
DESCRIPTION
Top-down gluing system stand
See typical system illustrations, pages 25 and 26.
© Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA
Tel: 513.874.6550 • Fax: 513.874.3612 • info@valcomelton.com • www.valcomelton.com
24
System Stands
Typical system with DD-1 pump
© Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA
Tel: 513.874.6550 • Fax: 513.874.3612 • info@valcomelton.com • www.valcomelton.com
25
System Stands
Typical system with EPP6 pump
© Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA
Tel: 513.874.6550 • Fax: 513.874.3612 • info@valcomelton.com • www.valcomelton.com
26
Web Tensioner/Web Scraper Options
Web Tensioner/Web Scraper Options
582xx883
The web tensioner is used to apply tension to the web resulting in a tighter wound core. A tighter wound core
promotes better bonding with the glue. Some machines/companies use their own tensioner.
Web Tensioner Option
PN
DESCRIPTION
582xx883
Universal web tensioner (4-inch max web) Used with top down stand 582xx852
583xx002
Rear mounted tensioner (4-inch max web) Used with bottom up stand 582xx814
SMT4260
Large rear mounted tensioner (8-inch max web) Used with 8-inch bottom up stand PDM0145
The web scraper is used in European applications to force the glue into the fiber of the paper.
Web Scraper Option
PN
782xx189
DESCRIPTION
Web scraper
© Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA
Tel: 513.874.6550 • Fax: 513.874.3612 • info@valcomelton.com • www.valcomelton.com
27
Web Tensioner/Web Scraper Options
582xx883
© Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA
Tel: 513.874.6550 • Fax: 513.874.3612 • info@valcomelton.com • www.valcomelton.com
28
Web Tensioner/Web Scraper Options
583xx002
© Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA
Tel: 513.874.6550 • Fax: 513.874.3612 • info@valcomelton.com • www.valcomelton.com
29
Web Tensioner/Web Scraper Options
SMT4260
© Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA
Tel: 513.874.6550 • Fax: 513.874.3612 • info@valcomelton.com • www.valcomelton.com
30
Web Tensioner/Web Scraper Options
782xx189
© Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA
Tel: 513.874.6550 • Fax: 513.874.3612 • info@valcomelton.com • www.valcomelton.com
31
Web Oiler Option
Web Oiler
SMT3782
The oiler is used to lubricate the web to prevent heat buildup and allow the paper to form smoothly around
the mandrel during the core winding process.
Web Oiler
PN
SMT3872
DESCRIPTION
Web oiler
© Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA
Tel: 513.874.6550 • Fax: 513.874.3612 • info@valcomelton.com • www.valcomelton.com
32
Web Oiler Option
SMT3872
© Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA
Tel: 513.874.6550 • Fax: 513.874.3612 • info@valcomelton.com • www.valcomelton.com
33
Web Break Detection Option
Web Break Detection
Single web break detection
Dual web break detection
Web break detection is used to stop the glue valve in the case of a break in the paper.
Single Web Break Detection
QTY REQ'D
PN
DESCRIPTION
1
280xx283
Fixed field sensor
1
029xx362
Sensor adaptor cable
1
280xx248
"Y" scanner adapter
1
098xx089
Switch box
1
582xx810
Sensor bracket
1
030xx593
Scanner cable 2M
Dual Web Break Detection
QTY REQ'D
PN
DESCRIPTION
2
280xx283
Fixed field sensor
2
029xx362
Sensor adaptor cable
2
280xx248
"Y" scanner adapter
1
098xx089
Switch box
2
582xx810
Sensor bracket
1
030xx593
Scanner cable 2M
© Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA
Tel: 513.874.6550 • Fax: 513.874.3612 • info@valcomelton.com • www.valcomelton.com
34
Heated Hose Option
Heated Hose
The heated hose is used to maintain consistent adhesive viscosity in colder temperature plants or to
promote better bonding on higher speed machines.
Heated Hose Option
QTY REQ'D
PN
1
780xx003
Heated hose 8ft lg
1
TAJ0144
Temperature control
2
792xx081
1/4 NPT x 9/16JIC SS fitting
1
797xx056
1/4 coupling
1
797xx049
1/2 x 1/4 bushing
1
703xx418
Shut-off valve
DESCRIPTION
© Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA
Tel: 513.874.6550 • Fax: 513.874.3612 • info@valcomelton.com • www.valcomelton.com
35
Sample Core Winding Systems
Sample systems
Sample System; 4-Inch Web, Top-Down Gluing, Low Pressure
QTY REQ'D
PN
1
583xx003
Core winder bracket
1
SMT4615
Valve/Head
2
708xx611
Blank shim
1
782xx072
Valve support equipment, 832 regulator
1
074xx038
MCP-4 control
1
155xx341
Encoder kit
1
030xx630
Encoder cable, 2M
1
098xx089
Switch box
3
030xx623
Valve cable, 1M (for glue valve, solenoid & web tensioner)
1
030xx592
Scanner cable, 1M (for rotary reed switch)
1
561xx175
Fluid handling system, DD-1 pump
1
582xx852
System stand, top down
1
582xx883
Web tensioner, universal
1
MY030
DESCRIPTION
Manual
© Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA
Tel: 513.874.6550 • Fax: 513.874.3612 • info@valcomelton.com • www.valcomelton.com
36
Sample Core Winding Systems
Sample System; 8-Inch Web, Bottom-Up Gluing, High Pressure
QTY REQ'D
PN
1
SMT4512
Core winder bracket
1
SMT3517
Valve/Head
2
708xx745
Blank shim
074xx038
MCP-4 control
1
155xx341
Encoder kit
1
030xx630
Encoder cable, 2M
1
098xx089
Switch box
3
030xx623
Valve cable, 1M (for glue valve, solenoid & web tensioner)
1
030xx592
Scanner cable, 1M (for rotary reed switch)
1
579xx393
Fluid handling, high pressure
1
PDM0145
System stand, Bottom-up
1
SMT4260
Web tensioner,8-inch
1
MY030
DESCRIPTION
Manual
© Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA
Tel: 513.874.6550 • Fax: 513.874.3612 • info@valcomelton.com • www.valcomelton.com
37
Core Winding System
Specials
When the standard core winder assemblies are not practical for the application, specialty assemblies can be
designed. Below is a list of previous designed specialty core winders for reference.
Note: Contact Engineered Products Group for quoting
Valves
PN
DESCRIPTION
708xx784
369 valve w/ 1.0" pattern head. Used for older single-ply systems and some
O.E.M. machines - replaced by 708xx781
708xx781
Old-style valve, replaced by SMT4615
Web Tensioner
PN
SMT4452
DESCRIPTION
Web tensioner, dual web, side-by-side, Used with SMT4488 bracket and
SMT4451 stand
© Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA
Tel: 513.874.6550 • Fax: 513.874.3612 • info@valcomelton.com • www.valcomelton.com
38
Core Winding System
Specials
Note: Contact Engineered Products Group for quoting
Brackets
PN
DESCRIPTION
SMT4531
Special application, 4-inch core winder heavy duty upgrade. Used in high
tension applications. Replaces top section on standard core winder bracket
SMT4198
Special application, includes metal rollers and mounting for load cell
SMT4488
Special application, Dual web side-by-side, 3-ply machines
SMT4521
Special application, vertical with web guide, multi-ply machines
© Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA
Tel: 513.874.6550 • Fax: 513.874.3612 • info@valcomelton.com • www.valcomelton.com
39
Core Winding System
Specials
Note: Contact Engineered Products Group for quoting
Stands
PN
DESCRIPTION
SMT4073
Special application, Dual vertical application with Fife guides, 8-inch web
SMT4451
Special application, Bottom-up system stand for dual web side-by-side core
winder SMT4488
© Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA
Tel: 513.874.6550 • Fax: 513.874.3612 • info@valcomelton.com • www.valcomelton.com
40