Subido por Slobodan Mitrovic

How to do Band Lock or PCI Lock

To set the Scan mode and LTE band, perform the following steps:
1
Choose Settings >Network>Scan Mode.
2
In the Settings area, you can set the Scan Mode.
3
Choose a Scan Mode which you want to set, such as full band, Band Lock, Frequency Lock.
4
Choose Band Lock, you can set band you want to set.
5
Choose Frequency Lock, you can set frequency you want to set.
6 Choose PCI Lock, Then input EARFCN and PCI, you can lock any cell you want to connect.