Subido por Jorge Marín Gambón

Planning THERM Timber H-I H-V 2016

Anuncio
+
THERM H-I/H-V
Planning Timber curtain wall
THERM+ H-I/H-V
Integration elements
Integration elements FRAME+
Integration elements WING
THERM+ H-I/H-V
Thermal insulation
Basics
Uf values THERM+ curtain wall systems
THERM+ H-I
System sections
THERM+ H-V
Assembly options
Connector technology
Glazing/Sealing technology
Accessories
Connection profiles
Statics
THERM+ H-I
Add-ons
Burglar resistant curtain wall WK2
Burglar resistant curtain wall WK3
Structural Glazing SG2
THERM+ H-I
Assembly options
THERM+ H-V
Add-ons
THERM+ H-V
System sections
THERM+ H-V
System sections
System benefits
System sections 50/56/76 mm
Assembly options
Polygon glazing system
Cover/Pressure profile options
Building connections
THERM+ H-V
Add-ons
THERM+ H-I
Assembly options
Connector technology
Glazing/Sealing technology
Accessories
Connection profiles
Statics
THERM+ H-V
Assembly options
Burglar resistant curtain wall WK2
Burglar resistant curtain wall WK3
Fire resistant curtain wall F30 (EI30)
Structural Glazing SG2
THERM+ H-I/H-V
Integration elements
THERM+ H-I
Add-ons
THERM+ H-I/H-V
Thermal insulation
THERM+ H-I
System sections
System benefits
System sections 50/56/76/96 mm
Assembly options
Polygon glazing system
Cover/Pressure profile options
Building connections
2016
3
4
2016
THERM+ H-I
System sections
Content
System benefits
Technology in detail
Tests
Variants
TC timber connector
Ventilation
Sealing system
7
9
10
12
14
18
System sections
System width 50 mm
System width 56 mm
System width 76 mm
System width 96 mm
Building connections 50/56/76 mm
19
44
68
87
92
2016
5
6
2016
THERM+ H-I
Timber curtain wall 50/56/76/96 mm
Technology in detail
■ Excellent product properties
– System widths 50, 56, 76 and 96 mm.
– Infill thickness from 6 to 64 mm.
– Maximal energy saving by variable thermal insulation with
insulating block options up to Uf= 0.80 W/(m²K) including
screw influence.
– All profiles can be used as well for mullions as for transoms.
■ Optimum planning
– Glass load transmission for very high glass weights up to 600 kg.
– Vertical curtain wall.
– Construction as polygon curtain wall up to 45° with system
accessories.
– No components lasting from the outside to the timber construction.
– Entire imposed load and load transmission tested.
– Extensive system accessories.
■ Efficient installation
– Two types of aluminium base profiles for screw connection: With
or without positioning foot in the area of the timber structural profile.
– Solid timber connector technology in the options SOLO and
KOMBI, tested according to The European Technical Approval
(ETA).
– Integrated drainage at the continuous gasket in three levels.
– Safe fixation of all construction elements in the continuous
aluminium screw channel.
– Easy and quick screwing of base profiles also with magazine
screw driver possible.
THERM+ Timber H-I
with insulating block P 19
SH-0005
2016
7
THERM+ H-I
System sections
System benefits
THERM+ H-I
System benefits
Timber curtain wall 50/56/76/96 mm
Technology in detail
■ Pressure and cover profiles
for curtain wall and roof light
applications
– Wide selection of various types as well as
system widths.
– Individual solutions for objects in a short time
available.
– Visually especially attractive flat pressure
profile with an offset of only 4 mm above
the glass surface.
– Ideal cross point sealing by special
accessories.
– Timber cover profiles to clip available.
■ Base profiles
– Suitable for all system variations.
– Improved screw channel for optimum thermal
break.
– Specific gasket holding fixture for easy fixing
of the silicon-free EPDM gasket.
– Slottet holes for integrated expansion
compensation.
– With or without foot.
■ Connector system for timber curtain wall
– Highly efficient and time-saving.
– All machining is in transoms.
– Few special screws required for maximum
load-bearing capacity.
– Stable connection for high glass loads.
– Extremely fast construction site assembly:
Push in transoms and screw together.
– Transoms can be dismantled at any time.
– No adjustment needed thanks to the
automatically flush stop.
– Tested with infill thicknesses of up to 64 mm.
– Seven installation depths for transom depths
from 60 to 300 mm.
– Tested according to ETA-13/0765.
8
2016
THERM+ H-I
Timber curtain wall 50/56/76 mm
THERM+ – Certified quality, CE-conform and tested
THERM+ quality you can rely upon.
Extensive product tests with excellent results confirm the high quality in practical applications of the THERM+ curtain wall system.
■ Product standard for curtain walling EN 13830:
Features and classification for the CE-Labelling.
No.
Test type/Standard
Classification/Result
Testing institute/Test no.
4.1
Wind resistance (EN 13116)
Permissible load 2.5 KN/m2
Increased load 3.75 KN/m2
ift Rosenheim
No. 10-000502
4.3
Resistance against impact
(if specially requested) (EN 14019)
Interior I5
Exterior E5
ift Rosenheim
No. 10-000502
4.4
Air permeability
(EN 12152)
AE (>600)
ift Rosenheim
No. 10-000502
4.5
Water penetration
(EN 12154)
RE 2100
ift Rosenheim
No. 10-000502
4.6
Airborne sound insulation
(if specially requested)
(EN ISO 140-3)
RW(C;Ctr) = 36 (-1;-3) dB
RW(C;Ctr) = 41 (-2;-5) dB
RW(C;Ctr) = 41 (-3;-7) dB
RW(C;Ctr) = 46 (-1;-5) dB
RW(C;Ctr) = 49 (-2;-4) dB
ift Rosenheim
No. 10-000502
4.7
Thermal transmittance (UCW-value)
(EN 13947)
Calculation with data from RAICO
Uf-value tables
EN 13947 (calculation)
■ Notice
– All features can be used for CE-Labelling by the manufactures of curtain walls. It is mandatory that only RAICO products has to be
used and the production process has to be monitored by an in-house production control system. The whole production process has
to be compliant to the RAICO assembly instructions.
– Depending on the panel dimensions of the curtain wall and the structural connections the sound insulation value has to be calculated
separately. The system testimonial can only be used for an overview.
– Depending on the different systems options and the glass thickness the Uf-value can be adapted step-by-step. The exacts values
based on DIN EN ISO 10077-2 are documented in the thermal protection documentations by RAICO.
■ Additional approvals and certifications
Test
Result
Description
German general approval:
clamping joint for the curtain
wall system
- Fixing of base profile
- Screw channel of mullion-transom
profiles
- Pressure profiles
- Screws
German general approval for the
DIBt, Berlin
fixing system THERM+ H-I Timber No. Z-14.4-455
curtain wall
European Technical Approval: Connector types with max. vertical
SOLO/KOMBI timber mullion- loads (characteristic resistance)
transom connectors
Glass roof with 2° inclination:
Air permeability
Water penetration
Wind resistance
Burglar prevention
European Technical Approval for
timber mullion-transom connection
system THERM+
Class AE including accessories
Criteria for glass roofs until 2°
inclination fulfilled for all system
(e. g. sun protection fixation)
Class RE 2550 including accessories widths
(e. g. sun protection fixation)
test load 2600 Pa, safety 3900 Pa
(e. g. sun protection fixation)
Resistance class WK 2 for system
Test THERM+ H-I
Testing institute/Test no.
ETA-Denmark
No. ETA-13/0765
ift Rosenheim
No. 13-002240-PR01
widhts 50, 56 and 76 mm
according to DIN EN 1627 ff.
ift Rosenheim
No. 21121747
Burglar prevention
Resistance class WK 3 for system
widhts 50, 56 and 76 mm
Test THERM+ H-I
according to DIN EN 1627 ff.
ift Rosenheim
No. 21122229
Fall protection
Criteria of DIN 18008-4
(technical rules for fall proof glazing)
fulfilled
Criteria fulfilled
Passive house curtain wall
Ucw ≤ 0.8 W/m2K
of system THERM+ H-I 50, 56, 76
with insulating block P
Fulfilment all criteria for
components suitable for passive
houses
passive house institute
Dr. Feist certificate
2016
9
THERM+ H-I
System sections
System benefits
THERM+ H-I
System benefits
Timber curtain wall 50/56/76/96 mm
Curtain wall options/drainage system
■ Structural Glazing SG2
– System widths 50 or 56 mm.
– Glazing system for optical exclusive
SG curtain wall.
– Maximum thermal insulation by special
insulating block SG.
– Simple and economic processing.
– Without visible physcial protections up to
an assembly height of 8 m.
■ Burglar proof curtain wall
WK2/WK3
– System widths 50, 56 and 76 mm.
– Resistance class WK2 and WK3 permitted.
– Simple processing.
– Identical technology to the basic system.
■ Fire protection F30 (EI30)
– System widths 50 or 56 mm.
– Fire protection curtain walls F30 (EI30).
– Glass dimension up to 1,500 mm x 3,000 mm
horizontal and vertical.
– Simple processing.
– Identical technology to the basic system.
■ Drainage system
– The drainage groove of the mullion and
transom gasket is arranged in various levels.
– In all THERM+ systems the ventilation and
drainage principle is so designed that a
controlled condensate removal from
transom to the mullion rebate is secured
via interior gaskets.
10
2016
HSG-0001, HWK-0001, H-EI30-0001, SH-0001
THERM+ H-I
Timber curtain wall 50/56/76/96 mm
Gasket options
■ Exterior gasket
– Various exterior gaskets and insulating block
options available.
Standard exterior gasket
– Gradual adaptation of the insulation value.
– Maximum thermal insulation up to
Uf= 0.80 W/(m²K) including screw influence.
Insulating block 9
– Certified passive house curtain wall.
– Economic solution.
Insulating block 21
Insulating block P
■ Transom and mullion gaskets
– Optimised shape for maximum thermal
insulation and efficient fabrication.
– Complete covering and sealing of the base
prof ile.
Mullion gasket
Transom gasket
– Perfect and easy fitting on the structural profile
(without silicone).
– Two options of gaskets with flaps for transom
and base drainage as well as draining within
the continuous gasket at the structural
connections.
Base transom gasket, flap
Gasket for transom, flap
– Reliable drainage in two or three levels
by simply notching.
– Proved up to 2° roof inclination.
– Special accessories for all applications,
e. g. transom and mullion sealing elements.
Polygon gasket
Mullion gasket
Single glazing
Expansion mullion gasket
HI-0084
2016
11
THERM+ H-I
System sections
System benefits
THERM+ H-I
System benefits
Timber curtain wall 50/56/76/96 mm
Variants TC Timber connector
■ SOLO
– Tensioned with nail screws.
– Safe and tested dispersal of glass weights.
– Inserted invisibly between mullion and transom.
– Tested according to ETA-13/0765.
– Safe dispersal of the glass loads and resulting
torsion forces via the timber structure.
– Seven installation depths for transom depths from
60 to 300 mm.
– Installation in a few simple steps and minimum
processing.
– Integrated longitudinal stop and transom contact pressure over the entire depth for a perfect T-connection.
■ KOMBI
– Tensioned with nail screws through the transom
base profile.
– Safe and tested dispersal of glass weights.
– Inserted invisibly between mullion and transom.
– Tested according to ETA-13/0765.
– Safe dispersal of the glass loads and resulting
torsion forces via the timber structure.
– Seven installation depths for transom depths from
60 to 300 mm.
– Installation in a few simple steps and minimum
processing.
– Integrated longitudinal stop and transom contact pressure over the entire depth for a perfect T-connection.
■ Super-simple installation
– Highly efficient and time-saving.
– All machining is in transoms.
– Few special screws required for maximum
load-bearing capacity.
– Stable connection for high glass loads.
– Extremely fast construction site assembly:
Push in transoms and screw together.
– Transoms can be dismantled at any time.
– No adjustment needed thanks to the
automatically flush stop.
12
2016
THERM+ H-I
Timber curtain wall 50/56/76/96 mm
Variants TC Timber connector
■ High loading capacity on european standard
The new timber connector is tested according to the current guideline ETAG 015 and certified with the european technical approval
ETA-13/0765. In comparison to the previous timber connector now the infill thickness of 64 mm is tested and also part of the aforementioned approval. Due to detail improvements the new timber connector which is available in the versions SOLO and KOMBI
characterises a much more rational and technical superior assembly.
– Static calculation possible on the base of the Eurocodes.
– The denoted loads of the connector are based on a minimum apparent density of 350 kg/m³, with the use of timber or derived
timber products with a higher apparent density the loads can be increase up to an apparent density of 500 kg/m³.
Admissible loads in consideration of the apparent density TC SOLO
Apparent density
350 kg/m3
400 kg/m3
450 kg/m3
500 kg/m3
Maximum glass load* per transom in kg
Type of connector
TC 60 SOLO
380 kg/m3
*it is imperative to respect the ETA-13/0765
116
119
120
124
126
TC 80 SOLO
138
141
143
147
151
TC 100 SOLO
162
167
170
176
182
TC 120 SOLO
182
188
191
198
205
TC 160 SOLO
218
225
229
239
248
TC 200 SOLO
250
258
263
274
286
TC 240 SOLO
276
285
291
305
317
450 kg/m3
500 kg/m3
Admissible loads in consideration of the apparent density TC KOMBI
Apparent density
350 kg/m3
380 kg/m3
400 kg/m3
Maximum glass load* per transom in kg
Type of connector
*it is imperative to respect the ETA-13/0765
TC 60 KOMBI
253
256
257
260
263
TC 80 KOMBI
274
278
279
284
288
387
TC 100 KOMBI
367
372
375
381
TC 120 KOMBI
388
393
396
403
410
TC 160 KOMBI
423
430
434
444
453
TC 200 KOMBI
455
463
468
480
491
TC 240 KOMBI
481
490
496
510
523
KH-0520
2016
13
THERM+ H-I
System sections
System benefits
THERM+ H-I
System benefits
Timber curtain wall 50/56/76/96 mm
Isothermal lines
Especially for aluminium curtain walls and
conservatories it is essential for long term
function and maximum satisfaction of the clients
to offer a well-performing thermal insulation
and an optimized isothermal line. Only high
quality systems which correspond to both
requirements can avoid the formation of
condensate.
■ Isothermal lines
– Double glazing with Ug=1.1 W/(m2K) and
acrylic spacer.
– Already with standard exterior gaskets the
10°C- isothermal line remains completely
within the system.
– Condensate is avoided efficiently.
– Individual adaption at higher risk of condensation is possible (e. g. conservatories and
swimming pools).
THERM+ 50 H-I
with acrylic spacer
■ Formation of condensate
– The humidity in the room can no longer be
absorbed by the air.
Due to the outstanding thermal insulation already with standard gaskets as well as the insulating effect of acrylic spacers the isothermal line
does not touch the surface of the structure.
– The humidity builds up drops on building
compoments with low surface temperatures.
– Movement of the drop formation of insulating
glass towards the area of the spacer an the
frame of the curtain wall system.
– Appearing of condensate at standardized
conditions of 50% humidity and 20°C
temperature on surfaces with a temperaure
of 10°C.
■ Influence of the curtain wall system
– The surface temperature on the inside of the
curtain wall system does not decrease below
10°C even when the exterior temperature is
10°C below zero.
– 10°C-isothermal line of the THERM+ system
remains completely within the system and
condensate is efficiently avoided.
THERM+ 50 H-I
with aluminium spacer
■ Influence of the glass spacer
– Besides the thermal insulation of the curtain
wall system the type of spacer and glass edge
is another important factor.
Here the isothermal line is less advantageous
due to the influence of the aluminium spacer.
– The spacer which is a thermal bridge transfers
temperatures deep into the frame of the curtain
wall system.
– Use of glass spacers which offer a maximum
thermal insulation (e. g. acrylic or steel).
14
2016
HI-0001
THERM+ H-I
Timber curtain wall 50/56/76/96 mm
Ventilation options
Option I a: Pressure compensation via mullion – connection below/on top
The ventilation and the condensate removal of the
glazing rebate is effected via the four corners of
every infill unit in the mullion profiles and across an
on-site adapter construction.
■ Technical information
– T44 = Foil connection behind
drainage level
– T45 = Collateral pressure
compensation
– T48 = Ventilation
– T49 = Ventilation
– T138 = Maximum 8 m resp.
maximum 8 panels
– T139 = All other 8 m resp. 8 panels
KH-0100
2016
15
THERM+ H-I
System sections
System benefits
THERM+ H-I
System benefits
Timber curtain wall 50/56 mm
Ventilation options
Option I b: Pressure compensation via mullion and synthetic sealing piece
The ventilation and the condensate removal of the
glazing rebate is effected via the four corners of
every infill unit in the mullion profiles and addtional
with a sealing piece via an opening of pressure
profiles in the mullion area.
Synthetic sealing piece:
System widths 50 mm:
No. 167140 PU = 10 pieces
System widths 56 mm:
No. 167145 PU = 10 pieces
■ Technical information
– T44 = Foil connection
behind drainage level
– T45 = Collateral pressure
compensation
– T48 = Ventilation
– T49 = Ventilation
– T138 = Maximum 8 m resp.
maximum 8 panels
– T139 = All other 8 m
resp. 8 panels
16
2016
KH-0102
THERM+ H-I
Timber curtain wall 50/56/76/96 mm
Ventilation options
Option II: Pressure compensation of extra large transoms via pressure and cover profiles
An additional opening result from a transom
width of 1200 mm, two additional openings
result from a transom width of 1800 mm in the
pressure and cover profiles (options II a and II b).
The number of openings depends on the transom
length, the individual project and glazing requirements and must be determined in accordance with
the glass supplier.
to
■ Technical information
– T121 = Option II a
– T122 = Option II b
KH-0101
2016
17
THERM+ H-I
System sections
System benefits
THERM+ H-I
System benefits
Timber curtain wall 50/56/76 mm
Interior sealing system
3 drainage levels
■ Technical information
– T38 = Level 2.
– T39 = Level 3.
– T40 = Level 1.
– T151 = Interior gasket E3.
– T152 = Interior gasket E2.
– T153 = Interior gasket E1.
7.5
– T159 = Interior gasket E2 with flap.
18
2016
K-0011
THERM+ H-I
Timber curtain wall
Certified passive house curtain wall with insulating block P 50/39
Mullion section/transom section
■ Technical information
■ Profiles
– Certified by passive house institute Dr. Feist.
Article
No.
PU
– Uf-values see chapter Thermal insulation.
Cover profile 50/15
013003
6m
– T1 = Depths from 50 mm.
Cover profile 50/12
013004
6m
Pressure profile 47
punched
118005
6m
Base profile 41 punched
145005
6m
■ Gaskets
Article
No.
PU
Gasket for pressure
profile 5
011073
100 m
Gasket for mullion 50
150005
20 m
Gasket for transom 50
150010
20 m
Insulating block P 50/39
168514
50 m
No.
PU
012029
100
pc(s)
012124
100
pc(s)
016050
10 pc(s)
152010
100
pc(s)
152401
10 pc(s)
Glass carrier 43 to 44
162080
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
■ Accessories
Article
Special countersunk
sheet metal screw
5.5x24
Pan head tapping screw
5.5x62
Crosspoint sealing plate
50
Sealing piece
for transom 50
Sealing piece
for pressure profile 50/5
HI-0084
2016
19
THERM+ H-I
System sections
System sections 50 mm
THERM+ H-I
System sections 50 mm
Timber curtain wall
Certified passive house curtain wall, insulating block P 50/39, base profile for groove installation
Mullion section/transom section
■ Technical information
■ Profiles
– Certified by passive house institute Dr. Feist.
Article
No.
PU
– Uf-values see chapter Thermal insulation.
Cover profile 50/15
013003
6m
Cover profile 50/12
013004
6m
118005
6m
145021
6m
– T1 = Depths from 50 mm.
Pressure profile 47
punched
Base profile 41 with foot
punched
■ Gaskets
Article
No.
PU
Gasket for pressure
profile 5
011073
100 m
Gasket for mullion 50
150005
20 m
Gasket for transom 50
150010
20 m
Insulating block P 50/39
168514
50 m
No.
PU
012029
100
pc(s)
012124
100
pc(s)
016050
10 pc(s)
152010
100
pc(s)
152401
10 pc(s)
Glass carrier 43 to 44
162080
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
■ Accessories
Article
Special countersunk
sheet metal screw
5.5x24
Pan head tapping screw
5.5x62
Crosspoint sealing plate
50
Sealing piece
for transom 50
Sealing piece
for pressure profile 50/5
20
2016
HI-0171
THERM+ H-I
Timber curtain wall
Insulating block P 50/19
Mullion section/transom section
■ Technical information
■ Profiles
– The type of insulating block P depends on the infill
thickness:
- 24 to 29 mm: insulating block P 50/19, No. 168509
- 30 to 43 mm: insulating block P 50/25, No. 168510
- 44 to 64 mm: insulating block P 50/39, No. 168514.
Article
– Uf-values see chapter Thermal insulation.
– T1 = Depths from 50 mm.
No.
PU
Cover profile 50/15
013003
6m
Cover profile 50/12
013004
6m
Pressure profile 47
punched
118005
6m
Base profile 41 punched
145005
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
Gasket for mullion 50
150005
20 m
Gasket for transom 50
150010
20 m
Insulating block P 50/19
168509
50 m
No.
PU
012029
100
pc(s)
012114
100
pc(s)
014035
10 pc(s)
016050
10 pc(s)
152010
100
pc(s)
Glass carrier 25 to 26
162035
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
■ Accessories
Article
Special countersunk
sheet metal screw
5.5x24
Pan head tapping screw
5.5x42
Sealing piece
for pressure profile 50
Crosspoint sealing plate
50
Sealing piece
for transom 50
HI-0088
2016
21
THERM+ H-I
System sections
System sections 50 mm
THERM+ H-I
System sections 50 mm
Timber curtain wall
Insulating block 21
Mullion section/transom section
■ Technical information
■ Profiles
– Uf-values see chapter Thermal insulation.
Article
– T1 = Depths from 50 mm.
No.
PU
Cover profile 50/15
013003
6m
Cover profile 50/12
013004
6m
Pressure profile 47
punched
118005
6m
Base profile 41 punched
145005
6m
■ Gaskets
Article
No.
PU
Gasket for mullion 50
150005
20 m
Gasket for transom 50
150010
20 m
Insulating block 50/21
150605
50 m
No.
PU
012029
100
pc(s)
012115
100
pc(s)
014035
10 pc(s)
016050
10 pc(s)
152010
100
pc(s)
Glass carrier 27 to 28
162040
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
■ Accessories
Article
Special countersunk
sheet metal screw
5.5x24
Pan head tapping screw
5.5x45
Sealing piece
for pressure profile 50
Crosspoint sealing plate
50
Sealing piece
for transom 50
22
2016
HI-0014
THERM+ H-I
Timber curtain wall
Insulating block 9
Mullion section/transom section
■ Technical information
■ Profiles
– Uf -values see chapter Thermal insulation.
Article
– T1 = Depths from 50 mm.
No.
PU
Cover profile 50/15
013003
6m
Cover profile 50/12
013004
6m
Pressure profile 47
punched
118005
6m
Base profile 41 punched
145005
6m
■ Gaskets
Article
No.
PU
Gasket for mullion 50
150005
20 m
Gasket for transom 50
150010
20 m
Insulating block 50/9
151010
50 m
No.
PU
012029
100
pc(s)
012114
100
pc(s)
014035
10 pc(s)
016050
10 pc(s)
152010
100
pc(s)
Glass carrier 25 to 26
162035
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
■ Accessories
Article
Special countersunk
sheet metal screw
5.5x24
Pan head tapping screw
5.5x42
Sealing piece
for pressure profile 50
Crosspoint sealing plate
50
Sealing piece
for transom 50
HI-0010
2016
23
THERM+ H-I
System sections
System sections 50 mm
THERM+ H-I
System sections 50 mm
Timber curtain wall
Standard exterior gasket
Mullion section/transom section
■ Technical information
■ Profiles
– Uf -values see chapter Thermal insulation.
Article
– T1 = Depths from 50 mm.
No.
PU
Cover profile 50/15
013003
6m
Cover profile 50/12
013004
6m
Pressure profile 47
punched
118005
6m
Base profile 41 punched
145005
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
Gasket for mullion 50
150005
20 m
Gasket for transom 50
150010
20 m
No.
PU
012029
100
pc(s)
012114
100
pc(s)
014035
10 pc(s)
016050
10 pc(s)
152010
100
pc(s)
Glass carrier 25 to 26
162035
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
■ Accessories
Article
Special countersunk
sheet metal screw
5.5x24
Pan head tapping screw
5.5x42
Sealing piece
for pressure profile 50
Crosspoint sealing plate
50
Sealing piece
for transom 50
24
2016
HI-0001
THERM+ H-I
90°
Timber curtain wall
Corner mullion 90°, vertical
Mullion section/transom section
■ Profiles
Article
No.
PU
Cover profile 50/15
013003
6m
Pressure profile 47
punched
118005
6m
Base profile 41 punched
145005
6m
Connection profile 39/22
168021
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
Gasket for mullion 50
150005
20 m
Compensation gasket 2
227010
100 m
■ Accessories
Article
Pan head tapping screw
5.5x42
Special timber screw
4.5x35
Special countersunk
sheet metal screw
4.8x19
HI-0178
No.
012114
908020
908118
2016
PU
100
pc(s)
100
pc(s)
100
pc(s)
25
THERM+ H-I
System sections
System sections 50 mm
THERM+ H-I
System sections 50 mm
90°
Timber curtain wall
Corner mullion 90°, vertical
Mullion section/transom section
■ Profiles
Article
No.
PU
Cover profile 50/15
013003
6m
Pressure profile 47
punched
118005
6m
Base profile 41 punched
145005
6m
Connection profile 39/22
168021
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
Gasket for mullion 50
150005
20 m
Compensation gasket 2
227010
100 m
■ Accessories
Article
Pan head tapping screw
5.5x42
Special timber screw
4.5x35
Special countersunk
sheet metal screw 4.8x19
26
2016
HI-0177
No.
012114
908020
908118
PU
100
pc(s)
100
pc(s)
100
pc(s)
THERM+ H-I
Timber curtain wall
Corner mullion for variable angles, vertical
Mullion section/transom section
■ Profiles
Article
No.
PU
Cover profile 50/15
013003
6m
Pressure profile 47
punched
118005
6m
Base profile 41 punched
145005
6m
Connection profile 39/22
168021
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
Gasket for mullion 50
150005
20 m
Compensation gasket 2
227010
100 m
■ Accessories
Article
Special timber screw
4.5x35
Special countersunk
sheet metal screw 4.8x19
HI-0179
No.
908020
908118
2016
PU
100
pc(s)
100
pc(s)
27
THERM+ H-I
System sections
System sections 50 mm
THERM+ H-I
System sections 50 mm
Timber curtain wall
Gasket for transom with flap between mullions
Transom section
■ Technical information
■ Profiles
– Available for all insulating blocks.
Article
– T1 = Depths from 50 mm.
No.
PU
Cover profile 50/12
013004
6m
Pressure profile 47
punched
118005
6m
Base profile 41 punched
145005
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
150015
20 m
No.
PU
012029
100
pc(s)
012114
100
pc(s)
014035
10 pc(s)
016050
10 pc(s)
152010
100
pc(s)
Glass carrier 25 to 26
162035
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
Gasket for transom 50
with flap
■ Accessories
Article
Special countersunk
sheet metal screw
5.5x24
Pan head tapping screw
5.5x42
Sealing piece
for pressure profile 50
Crosspoint sealing plate
50
Sealing piece
for transom 50
28
2016
HI-0002a
THERM+ H-I
Timber curtain wall
Continuous base gasket with flap
Transom section 50 mm
■ Technical information
■ Profiles
– Available for all insulating blocks.
Article
– Base gasket available up to an infill thickness
of 64 mm.
– T1 = Depths from 50 mm.
No.
PU
Cover profile 50/12
013004
6m
Pressure profile 47
punched
118005
6m
Base profile 41 punched
145005
6m
Connection profile 36/22
168005
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
150020
20 m
No.
PU
012029
100
pc(s)
012114
100
pc(s)
014035
10 pc(s)
016050
10 pc(s)
152010
100
pc(s)
152070
10 pc(s)
Glass carrier 25 to 26
162035
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
Base gasket for transom
50 with flap
■ Accessories
Article
Special countersunk
sheet metal screw
5.5x24
Pan head tapping screw
5.5x42
Sealing piece
for pressure profile 50
Crosspoint sealing plate
50
Sealing piece
for transom 50
Sealing piece
for base transom
HI-0002b
2016
29
THERM+ H-I
System sections
System sections 50 mm
THERM+ H-I
System sections 50 mm
Timber curtain wall
Timber cover profile clipped
Mullion section/transom section
■ Technical information
■ Profiles
– Timber cover profiles are products complementary to
the RAICO system components, supplied by the fabricator.
It must be assured that the function of the glazing system
remains guaranteed by adaptation of the constructional
and material characteristics of the timber cover profile.
Article
– The norms and regulations concerning the use of timber
in exterior building areas must be respected.
No.
PU
Pressure profile 44
punched
118505
6m
Base profile 41 punched
145005
6m
No.
PU
Gasket for mullion 50
150005
20 m
Gasket for transom 50
150010
20 m
Gasket for pressure
profile 7 H
150510
100 m
No.
PU
012029
100
pc(s)
012114
100
pc(s)
014035
10 pc(s)
016050
10 pc(s)
152010
100
pc(s)
Glass carrier 25 to 26
162035
10 pc(s)
Cover profile fixation 80
167005
Special timber screw
4.5x35
908020
■ Gaskets
– Timber cover profiles must be secured mechanically
after their installation.
Article
– For further information see Processing.
– T1 = Depths from 50 mm.
■ Accessories
Article
Special countersunk
sheet metal screw
5.5x24
Pan head tapping screw
5.5x42
Sealing piece
for pressure profile 50
Crosspoint sealing plate
50
Sealing piece
for transom 50
30
2016
HI-0107
100
pc(s)
100
pc(s)
THERM+ H-I
Timber curtain wall
Connection of ventilated/non-ventilated curtain wall
Transom section
■ Technical information
■ Profiles
– For the alternative solution (direct screw
connection) attention shall be paid to observing
a sufficient tolerance compensation
(see Processing).
Article
No.
PU
Cover profile 50/12
013004
6m
Pressure profile 47
punched
118005
6m
Base profile 41 punched
145005
6m
Connection profile 45/42
168060
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
011074
100 m
150015
20 m
No.
PU
012029
100 pc(s)
012114
100 pc(s)
014035
10 pc(s)
Crosspoint sealing plate 50
016050
10 pc(s)
Sealing piece
for transom 50
152010
100 pc(s)
Glass carrier 25 to 26
162035
10 pc(s)
Spec. timber screw 4.5x35
908020
100 pc(s)
Terminal clamp 47/22
915501
100 pc(s)
2016
31
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
Gasket for pressure
profile 7
Gasket for transom 50
with flap
■ Accessories
Article
Special countersunk
sheet metal screw
5.5x24
Pan head tapping screw
5.5x42
Sealing piece
for pressure profile 50
HI-0158
THERM+ H-I
System sections
System sections 50 mm
THERM+ H-I
System sections 50 mm
Timber curtain wall
Interior compensation of varying infill thicknesses
Mullion section/transom section
■ Technical information
■ Profiles
– Difference between the glass thicknesses
from 10 to 24 mm can be compensated
without exterior glass offset.
Article
– T1 = Depths from 50 mm.
No.
PU
Cover profile 50/15
013003
6m
Cover profile 50/12
013004
6m
116005
6m
118005
6m
145005
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
Gasket for mullion 50
150005
20 m
Gasket for transom 50
150010
20 m
Interior gasket 5
220321
100 m
No.
PU
012029
100 pc(s)
012103
100 pc(s)
012118
100 pc(s)
014035
10 pc(s)
Crosspoint sealing plate 50
016050
10 pc(s)
Sealing piece
for transom 50
152010
100 pc(s)
Glass carrier 33 to 34
162055
10 pc(s)
Special timber screw
4.5x35
908020
100 pc(s)
Fixture spring 26/25/10
915015
50 pc(s)
Compensation profile
7/23
Pressure profile 47
punched
Base profile 41 punched
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
■ Accessories
Article
Special countersunk
sheet metal screw
5.5x24
Flat fillister head screw
5.5x19
Pan head tapping screw
5.5x52
Sealing piece
for pressure profile 50
32
2016
HI-0005a
THERM+ H-I
Timber curtain wall
Single glazing
Mullion section/transom section
■ Technical information
■ Profiles
– Depending on the infill thickness the following gaskets
for pressure profile must be used:
- Infill thickness 10 to 11 mm: gaskets for pressure profile 5 mm
- Infill thickness from 12 mm: gaskets for pressure profile 3 mm.
– T1 = Depths from 50 mm.
Article
No.
PU
Cover profile 50/15
013003
6m
Cover profile 50/12
013004
6m
Pressure profile 47
punched
118005
6m
Base profile 41 punched
145005
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
Gasket for mullion 50
150005
20 m
Gasket for transom 50
150010
20 m
No.
PU
012029
100
pc(s)
012109
100
pc(s)
014035
10 pc(s)
016050
10 pc(s)
152010
100
pc(s)
Glass carrier 10 to 14
162005
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
■ Accessories
Article
Special countersunk
sheet metal screw
5.5x24
Pan head tapping screw
5.5x30
Sealing piece
for pressure profile 50
Crosspoint sealing plate
50
Sealing piece
for transom 50
HI-0005
2016
33
THERM+ H-I
System sections
System sections 50 mm
THERM+ H-I
System sections 50 mm
Timber curtain wall
Single glazing and interior gasket 26 mm
Mullion section/transom section
■ Technical information
■ Profiles
– Infill thickness from 4 to 20 mm.
Article
– T1 = Depths from 50 mm.
No.
PU
Cover profile 50/15
013003
6m
Cover profile 50/12
013004
6m
Pressure profile 47
punched
118005
6m
Base profile 41 punched
145005
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
Gasket for mullion 50/26
150461
20 m
Interior gasket 50/26 E3
150462
20 m
Interior gasket 50/26 E2
150463
20 m
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
■ Accessories
Article
Pan head tapping screw
5.5x32
Sealing piece
for pressure profile 50
Crosspoint sealing plate 50
Sealing piece
for transom 50/26
Sealing piece
for transom 50/26 E2
Glass carrier 10/13
Special timber screw
4.5x35
Special flat fillister head
screw 5.5x19
34
2016
HI-0133
No.
PU
012110
100
pc(s)
014035
10 pc(s)
016050
10 pc(s)
152007
152011
167556
908020
908308
100
pc(s)
100
pc(s)
10 pc(s)
100
pc(s)
100
pc(s)
THERM+ H-I
Timber curtain wall
Expansion mullion
Mullion section
■ Technical information
■ Profiles
– T11 = Depths from 100 mm.
Article
Cover profile 50/15
Pressure profile 47
punched
Expansion base profile
41 left punched
Expansion base profile
41 right punched
Insertion profile 18/14 I
No.
PU
013003
6m
118005
6m
145105
6m
145106
6m
168201
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
150305
40 m
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
Gasket for mullion 50 H
■ Accessories
Article
Pan head tapping screw
5.5x42
Pan Head timber screw
4.5x20
PU sealing strip 10/7
No.
012114
907550
951990
PU
100
pc(s)
100
pc(s)
10 m
offset arrangement
HI-0110
2016
35
THERM+ H-I
System sections
System sections 50 mm
THERM+ H-I
System sections 50 mm
Timber curtain wall
Polygon glazing system with standard interior gasket 1° to 7°
Mullion section exterior angle/interior angle
■ Technical information
■ Profiles
– With exterior gasket for pressure profile 5 mm
and standard interior gasket up to max. 7°.
Article
No.
PU
Cover profile 50/15
013003
6m
Pressure profile 47
punched
118005
6m
Base profile 41 punched
145005
6m
■ Gaskets
Article
No.
PU
Gasket for pressure
profile 5
011073
100 m
Gasket for mullion 50
150005
20 m
■ Accessories
Article
Pan head tapping screw
5.5x45
Special timber screw
4.5x35
36
2016
HI-0018
No.
012115
908020
PU
100
pc(s)
100
pc(s)
THERM+ H-I
Timber curtain wall
Polygon glazing system 8° to 15°
Mullion section exterior angle
■ Technical information
■ Profiles
– Face width of cover profile depends on angle
and infill thickness.
Article
No.
PU
– Glass bite (A and B) must be min. 12 mm.
The distance between glass edge and gasket
cap (C) has to be min. 3 mm. Please note the
glass tolerances!
Cover profile 56/15
013023
6m
Pressure profile 53
punched
118010
6m
Base profile 41 punched
145005
6m
No.
PU
011810
100 m
150040
20 m
No.
PU
■ Gaskets
Article
Gasket for pressure
profile 8° to 15°
Gasket for mullion 50
polygonal 8° to 20°
■ Accessories
Article
Pan head tapping screw
5.5x45
Special timber screw
4.5x35
HI-0135
012115
908020
2016
100
pc(s)
100
pc(s)
37
THERM+ H-I
System sections
System sections 50 mm
THERM+ H-I
System sections 50 mm
Timber curtain wall
Polygon glazing system 8° to 20° and 21° to 33° with polygon interior and exterior gasket
Mullion section exterior angle
■ Technical information
■ Profiles
– Insulating strips available on demand.
Article
Cover profile 50/15
Profile polygonal
8° to 20°
Profile polygonal
21° to 33°
Pressure profile 47
punched
Base profile 41 punched
No.
PU
013003
6m
013800
6m
013801
6m
118005
6m
145005
6m
No.
PU
011805
100 m
150040
20 m
150045
20 m
■ Gaskets
Article
Gasket for pressure
profile 5 polygonal
Gasket for mullion 50
polygonal 8° to 20°
Gasket for mullion 50
polygonal 21° to 33°
■ Accessories
Article
Pan head tapping screw
5.5x52
Pan head tapping screw
5.5x55
Special timber screw
4.5x35
38
2016
HI-0019
No.
012118
012119
908020
PU
100
pc(s)
100
pc(s)
100
pc(s)
THERM+ H-I
Timber curtain wall
Polygon glazing system 34° to 45° with polygon interior and exterior gasket
Mullion section exterior angle
■ Technical information
■ Profiles
– Insulating strips available on demand.
Article
Cover profile 50/15
Profile polygonal
34° to 45°
Pressure profile 47
punched
Base profile 41 punched
No.
PU
013003
6m
013802
6m
118005
6m
145005
6m
No.
PU
011805
100 m
150050
20 m
■ Gaskets
Article
Gasket for pressure
profile 5 polygonal
Gasket for mullion 50
polygonal 34° to 45°
■ Accessories
Article
Pan head tapping screw
5.5x62
Special timber screw
4.5x35
HI-0020
No.
012124
908020
2016
PU
100
pc(s)
100
pc(s)
39
THERM+ H-I
System sections
System sections 50 mm
THERM+ H-I
System sections 50 mm
Timber curtain wall
Cover profile options clipped
Mullion section
■ Technical information
40
■ Profiles
– Slipping down of the cover profiles must
be prevented.
Article
No.
PU
– For more cover profiles, end caps and belay
sheet see Product range.
Cover profile 50/15
013003
6m
Cover profile 50/12
013004
6m
Cover profile 50/25
013005
6m
Cover profile 50/25
013201
6m
Cover profile 50/20
013210
6m
Pressure profile 47
punched
118005
6m
Cover profile 50/30
141106
6m
2016
HI-0024
THERM+ H-I
Timber curtain wall
Pressure profile options visible screw connection
Mullion section
■ Technical information
■ Profiles
– For more pressure profiles see Product range.
Article
Pressure profile 50/12
HI-0025
No.
PU
013007
6m
Pressure profile 50/9
013008
6m
Pressure profile 50/25
013014
6m
2016
41
THERM+ H-I
System sections
System sections 50 mm
THERM+ H-I
System sections 50 mm
Timber curtain wall
Flat pressure profile options
Mullion section with three options
■ Technical information
■ Profiles
– Minimum infill thickness 22 mm.
Article
Pressure profile 50/3
No.
PU
013300
6m
No.
PU
220205
100 m
No.
PU
■ Gaskets
Article
Gasket for pressure
profile 2/16
■ Accessories
Article
Flat fillister head screw
5.5x35 with sealing ring
Pan head tapping screw
5.5x35
Pan head tapping screw
5.5x38 with sealing ring
Cover 11 S
42
2016
HI-0026
012011
012111
012175
014110
100
pc(s)
100
pc(s)
100
pc(s)
100
pc(s)
THERM+ H-I
Timber curtain wall
Flat pressure profile options for polygon glazing system 3° to 7° with standard interior gasket
Mullion section exterior angle
■ Technical information
■ Profiles
– Minimum infill thickness 22 mm.
Article
– Selection of pressure profiles according to
infill thickness and angle.
Pressure profile 50/3
No.
PU
013300
6m
No.
PU
011850
200 m
No.
PU
■ Gaskets
Article
Gasket for pressure
profile 3 polygonal 3° to 7°
■ Accessories
Article
Flat fillister head screw
5.5x35 with sealing ring
Pan head tapping screw
5.5x35
Pan head tapping screw
5.5x35 with sealing ring
Cover 11 S
HI-0162
012011
012111
012174
014110
2016
100
pc(s)
100
pc(s)
100
pc(s)
100
pc(s)
43
THERM+ H-I
System sections
System sections 50 mm
THERM+ H-I
System sections 56 mm
Timber curtain wall
Certified passive house curtain wall with insulating block P 56/39
Mullion section/transom section
■ Technical information
■ Profiles
– Certified by passive house institute Dr. Feist.
Article
No.
PU
– Uf -values see chapter Thermal insulation.
Cover profile 56/15
013023
6m
Cover profile 56/12
013024
6m
Pressure profile 53
punched
118010
6m
Base profile 47 punched
145010
6m
– T1 = Depths from 50 mm.
■ Gaskets
Article
No.
PU
Gasket for pressure
profile 5
011073
100 m
Gasket for mullion 56
150105
20 m
Gasket for transom 56
150110
20 m
Insulating block P 56/39
168520
50 m
No.
PU
012029
100
pc(s)
012124
100
pc(s)
016051
10 pc(s)
152015
100
pc(s)
152411
10 pc(s)
Glass carrier 43 to 44
162080
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
■ Accessories
Article
Special countersunk
sheet metal screw
5.5x24
Pan head tapping screw
5.5x62
Crosspoint sealing plate
56
Sealing piece
for transom 56
Sealing piece
for pressure profile 56/5
44
2016
HI-0093
THERM+ H-I
Timber curtain wall
Certified passive house curtain wall, insulating block P 56/39, base profile for groove installation
Mullion section/transom section
■ Technical information
■ Profiles
– Certified by passive house institute Dr. Feist.
Article
No.
PU
– Uf -values see chapter Thermal insulation.
Cover profile 56/15
013023
6m
Cover profile 56/12
013024
6m
118010
6m
145026
6m
– T1 = Depths from 50 mm.
Pressure profile 53
punched
Base profile 47 with foot
punched
■ Gaskets
Article
No.
PU
Gasket for pressure
profile 5
011073
100 m
Gasket for mullion 56
150105
20 m
Gasket for transom 56
150110
20 m
Insulating block P 56/39
168520
50 m
No.
PU
012029
100
pc(s)
012124
100
pc(s)
016051
10 pc(s)
152015
100
pc(s)
152411
10 pc(s)
Glass carrier 43 to 44
162080
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
■ Accessories
Article
Special countersunk
sheet metal screw
5.5x24
Pan head tapping screw
5.5x62
Crosspoint sealing plate
56
Sealing piece
for transom 56
Sealing piece
for pressure profile 56/5
HI-0156
2016
45
THERM+ H-I
System sections
System sections 56 mm
THERM+ H-I
System sections 56 mm
Timber curtain wall
Insulating block P 56/19
Mullion section/transom section
■ Technical information
■ Profiles
– The type of insulating block P depends on the infill
thickness:
- 24 to 29 mm: insulating block P 56/19, No. 168515
- 30 to 43 mm: insulating block P 56/25, No. 168516
- 44 to 64 mm: insulating block P 56/39, No. 168520.
Article
No.
PU
Cover profile 56/15
013023
6m
Cover profile 56/12
013024
6m
– Uf -values see chapter Thermal insulation.
Pressure profile 53
punched
118010
6m
– T1 = Depths from 50 mm.
Base profile 47 punched
145010
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
Gasket for mullion 56
150105
20 m
Gasket for transom 56
150110
20 m
Insulating block P 56/19
168515
50 m
No.
PU
012029
100
pc(s)
012114
100
pc(s)
014036
10 pc(s)
016051
10 pc(s)
152015
100
pc(s)
Glass carrier 25 to 26
162035
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
■ Accessories
Article
Special countersunk
sheet metal screw
5.5x24
Pan head tapping screw
5.5x42
Sealing piece
for pressure profile 56
Crosspoint sealing plate
56
Sealing piece
for transom 56
46
2016
HI-0091
THERM+ H-I
Timber curtain wall
Insulating block 21
Mullion section/transom section
■ Technical information
■ Profiles
– Uf -values see chapter Thermal insulation.
Article
– T1 = Depths from 50 mm.
No.
PU
Cover profile 56/15
013023
6m
Cover profile 56/12
013024
6m
Pressure profile 53
punched
118010
6m
Base profile 47 punched
145010
6m
■ Gaskets
Article
Gasket for mullion 56
No.
PU
150105
20 m
Gasket for transom 56
150110
20 m
Insulating block 56/21
150610
50 m
No.
PU
012029
100
pc(s)
012115
100
pc(s)
014036
10 pc(s)
016051
10 pc(s)
152015
100
pc(s)
Glass carrier 27 to 28
162040
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
■ Accessories
Article
Special countersunk
sheet metal screw
5.5x24
Pan head tapping screw
5.5x45
Sealing piece
for pressure profile 56
Crosspoint sealing plate
56
Sealing piece
for transom 56
HI-0043
2016
47
THERM+ H-I
System sections
System sections 56 mm
THERM+ H-I
System sections 56 mm
Timber curtain wall
Insulating block 9
Mullion section/transom section
■ Technical information
■ Profiles
– Uf -values see chapter Thermal insulation.
Article
– T1 = Depths from 50 mm.
No.
PU
Cover profile 56/15
013023
6m
Cover profile 56/12
013024
6m
Pressure profile 53
punched
118010
6m
Base profile 47 punched
145010
6m
■ Gaskets
Article
Gasket for mullion 56
No.
PU
150105
20 m
Gasket for transom 56
150110
20 m
Insulating block 56/9
151020
50 m
No.
PU
012029
100
pc(s)
012114
100
pc(s)
014036
10 pc(s)
016051
10 pc(s)
152015
100
pc(s)
Glass carrier 25 to 26
162035
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
■ Accessories
Article
Special countersunk
sheet metal screw
5.5x24
Pan head tapping screw
5.5x42
Sealing piece
for pressure profile 56
Crosspoint sealing plate
56
Sealing piece
for transom 56
48
2016
HI-0039
THERM+ H-I
Timber curtain wall
Standard exterior gasket
Mullion section/transom section
■ Technical information
■ Profiles
– Uf -values see chapter Thermal insulation.
Article
– T1 = Depths from 50 mm.
No.
PU
Cover profile 56/15
013023
6m
Cover profile 56/12
013024
6m
Pressure profile 53
punched
118010
6m
Base profile 47 punched
145010
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
Gasket for mullion 56
150105
20 m
Gasket for transom 56
150110
20 m
No.
PU
012029
100
pc(s)
012114
100
pc(s)
014036
10 pc(s)
016051
10 pc(s)
152015
100
pc(s)
Glass carrier 25 to 26
162035
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
■ Accessories
Article
Special countersunk
sheet metal screw
5.5x24
Pan head tapping screw
5.5x42
Sealing piece
for pressure profile 56
Crosspoint sealing plate
56
Sealing piece
for transom 56
HI-0030
2016
49
THERM+ H-I
System sections
System sections 56 mm
THERM+ H-I
System sections 56 mm
90°
Timber curtain wall
Corner mullion 90°, vertical
Mullion section/transom section
■ Profiles
Article
No.
PU
Cover profile 56/15
013023
6m
Pressure profile 53
punched
118010
6m
Base profile 47 punched
145010
6m
Connection profile 39/22
168021
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
Gasket for mullion 56
150105
20 m
Compensation gasket 2
227010
100 m
■ Accessories
Article
Pan head tapping screw
5.5x42
Special timber screw
4.5x35
Special countersunk
sheet metal screw
4.8x19
50
2016
HI-0182
No.
012114
908020
908118
PU
100
pc(s)
100
pc(s)
100
pc(s)
THERM+ H-I
90°
Timber curtain wall
Corner mullion 90°, vertical
Mullion section/transom section
■ Profiles
Article
No.
PU
Cover profile 56/15
013023
6m
Pressure profile 53
punched
118010
6m
Base profile 47 punched
145010
6m
Connection profile 39/22
168021
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
Gasket for mullion 56
150105
20 m
Compensation gasket 2
227010
100 m
■ Accessories
Article
Pan head tapping screw
5.5x42
Special timber screw
4.5x35
Special countersunk
sheet metal screw
4.8x19
HI-0181
No.
012114
908020
908118
2016
PU
100
pc(s)
100
pc(s)
100
pc(s)
51
THERM+ H-I
System sections
System sections 56 mm
THERM+ H-I
System sections 56 mm
Timber curtain wall
Corner mullion for variable angles, vertical
Mullion section/transom section
■ Profiles
Article
No.
PU
Cover profile 56/15
013023
6m
Pressure profile 53
punched
118010
6m
Base profile 47 punched
145010
6m
Connection profile 39/22
168021
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
Gasket for mullion 56
150105
20 m
Compensation gasket 2
227010
100 m
■ Accessories
Article
Special timber screw
4.5x35
Special countersunk
sheet metal screw
4.8x19
52
2016
HI-0183
No.
PU
908020
100
pc(s)
908118
100
pc(s)
THERM+ H-I
Timber curtain wall
Gasket for transom with flap between mullions
Transom section
■ Technical information
■ Profiles
– Available for all insulating blocks.
Article
– T1 = Depths from 50 mm.
No.
PU
Cover profile 56/12
013024
6m
Pressure profile 53
punched
118010
6m
Base profile 47 punched
145010
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
150115
20 m
No.
PU
012029
100
pc(s)
012114
100
pc(s)
014036
10 pc(s)
016051
10 pc(s)
152015
100
pc(s)
Glass carrier 25 to 26
162035
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
Gasket for transom 56
with flap
■ Accessories
Article
Special countersunk
sheet metal screw
5.5x24
Pan head tapping screw
5.5x42
Sealing piece
for pressure profile 56
Crosspoint sealing plate
56
Sealing piece
for transom 56
HI-0031a
2016
53
THERM+ H-I
System sections
System sections 56 mm
THERM+ H-I
System sections 56 mm
Timber curtain wall
Continuous base gasket with flap
Transom section
■ Technical information
■ Profiles
– Available for all insulating blocks.
Article
No.
PU
– Base gasket available up to an infill thickness
of 64 mm.
Cover profile 56/12
013024
6m
Pressure profile 53
punched
118010
6m
Base profile 47 punched
145010
6m
Connection profile 36/22
168005
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
150120
20 m
No.
PU
012029
100 pc(s)
012114
100 pc(s)
014036
10 pc(s)
016051
10 pc(s)
152015
100 pc(s)
152070
10 pc(s)
Glass carrier 25 to 26
162035
10 pc(s)
Special timber screw
4.5x35
908020
100 pc(s)
– T1 = Depths from 50 mm.
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
Base gasket for transom
56 with flap
■ Accessories
Article
Special countersunk
sheet metal screw 5.5x24
Pan head tapping screw
5.5x42
Sealing piece
for pressure profile 56
Crosspoint sealing plate 56
Sealing piece
for transom 56
Sealing piece
for base transom
54
2016
HI-0031b
THERM+ H-I
Timber curtain wall
Timber cover profile clipped
Mullion section/transom section
■ Technical information
■ Profiles
– Timber cover profiles are products complementary to
the RAICO system components, supplied by the fabricator.
It must be assured that the function of the glazing system
remains guaranteed by adaptation of the constructional
and material characteristics of the timber cover profile.
– The norms and regulations concerning the use of timber
in exterior building areas must be respected.
Article
No.
PU
Pressure profile 50 punched
118510
6m
Base profile 47 punched
145010
6m
No.
PU
Gasket for mullion 56
150105
20 m
Gasket for transom 56
150110
20 m
Gasket for pressure
profile 7 H
150510
100 m
No.
PU
012029
100
pc(s)
012114
100
pc(s)
014036
10 pc(s)
016051
10 pc(s)
152015
100
pc(s)
Glass carrier 25 to 26
162035
10 pc(s)
Cover profile fixation 80
167005
Special timber screw
4.5x35
908020
■ Gaskets
– Timber cover profiles must be secured mechanically
after their installation.
Article
– For further information see Processing.
– T1 = Depths from 50 mm.
■ Accessories
Article
Special countersunk
sheet metal screw
5.5x24
Pan head tapping screw
5.5x42
Sealing piece
for pressure profile 56
Crosspoint sealing plate
56
Sealing piece
for transom 56
HI-0108
2016
100
pc(s)
100
pc(s)
55
THERM+ H-I
System sections
System sections 56 mm
THERM+ H-I
System sections 56 mm
Timber curtain wall
Connection of ventilated/non-ventilated curtain wall
Transom section
■ Technical information
■ Profiles
– For the alternative solution (direct screw
connection) attention shall be paid to observing
a sufficient tolerance compensation
(see Processing).
Article
No.
PU
Cover profile 56/12
013024
6m
Pressure profile 53 punched
118010
6m
Base profile 47 punched
145010
6m
Connection profile 45/42
168060
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
011074
100 m
150115
20 m
No.
PU
012029
100
pc(s)
012114
100
pc(s)
Glass carrier 25 to 26
162035
10 pc(s)
Special timber screw
4.5x35
908020
Terminal clamp 47/22
915501
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
Gasket for pressure
profile 7
Gasket for transom 56
with flap
■ Accessories
Article
Special countersunk
sheet metal screw
5.5x24
Pan head tapping screw
5.5x42
56
2016
HI-0189
100
pc(s)
100
pc(s)
THERM+ H-I
Timber curtain wall
Interior compensation of varying infill thicknesses
Mullion section/transom section
■ Technical information
■ Profiles
– Difference between the glass thicknesses
from 10 to 24 mm can be compensated
without exterior glass offset.
Article
– T1 = Depths from 50 mm.
No.
PU
Cover profile 56/15
013023
6m
Cover profile 56/12
013024
6m
Compensation profile 7/23
116005
6m
Pressure profile 53
punched
118010
6m
Base profile 47 punched
145010
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
Gasket for mullion 56
150105
20 m
Gasket for transom 56
150110
20 m
Interior gasket 5
220321
100 m
No.
PU
012029
100 pc(s)
012103
100 pc(s)
012118
100 pc(s)
014036
10 pc(s)
Crosspoint sealing plate 56
016051
10 pc(s)
Sealing piece
for transom 56
152015
100 pc(s)
Glass carrier 25 to 26
162035
10 pc(s)
Special timber screw
4.5x35
908020
100 pc(s)
Fixture spring 26/25/10
915015
50 pc(s)
■ Accessories
Article
Special countersunk
sheet metal screw
5.5x24
Flat fillister head screw
5.5x19
Pan head tapping screw
5.5x52
Sealing piece
for pressure profile 56
HI-0034a
2016
57
THERM+ H-I
System sections
System sections 56 mm
THERM+ H-I
System sections 56 mm
Timber curtain wall
Single glazing
Mullion section/transom section
■ Technical information
■ Profiles
– Depending on the infill thickness the following gaskets
for pressure profile must be used:
- Infill thickness 10 to 11 mm: gaskets for pressure profile 5 mm
- Infill thickness from 12 mm: gaskets for pressure profile 3 mm.
Article
– T1 = Depths from 50 mm.
No.
PU
Cover profile 56/15
013023
6m
Cover profile 56/12
013024
6m
Pressure profile 53
punched
118010
6m
Base profile 47 punched
145010
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
Gasket for mullion 56
150105
20 m
Gasket for transom 56
150110
20 m
No.
PU
012029
100
pc(s)
012108
100
pc(s)
014036
10 pc(s)
016051
10 pc(s)
152015
100
pc(s)
Glass carrier 10 to 14
162005
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
■ Accessories
Article
Special countersunk
sheet metal screw
5.5x24
Pan head tapping screw
5.5x28
Sealing piece
for pressure profile 56
Crosspoint sealing plate
56
Sealing piece
for transom 56
58
2016
HI-0034
THERM+ H-I
Timber curtain wall
Expansion mullion
Mullion section
■ Technical information
■ Profiles
– T11 = Depths from 100 mm.
Article
Cover profile 56/15
No.
PU
013023
6m
Pressure profile 53
punched
Expansion base profile
47 left punched
Expansion base profile
47 right punched
118010
6m
145110
6m
145111
6m
Insertion profile 18/14 I
168201
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
150335
40 m
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
Gasket for mullion 56 H
■ Accessories
Article
Pan head tapping screw
5.5x42
Pan Head timber screw
4.5x20
PU sealing strip 10/7
No.
012114
907550
951990
PU
100
pc(s)
100
pc(s)
10 m
offset arrangement
HI-011
2016
59
THERM+ H-I
System sections
System sections 56 mm
THERM+ H-I
System sections 56 mm
Timber curtain wall
Polygon glazing system with standard interior gasket 1° to 7°
Mullion section exterior angle/interior angle
■ Technical information
■ Profiles
– With exterior gasket for pressure profile 5 mm
and standard interior gasket to max. 7°.
Article
No.
PU
Cover profile 56/15
013023
6m
Pressure profile 53
punched
118010
6m
Base profile 47 punched
145010
6m
■ Gaskets
Article
No.
PU
Gasket for pressure
profile 5
011073
100 m
Gasket for mullion 56
150105
20 m
■ Accessories
Article
Pan head tapping screw
5.5x45
Special timber screw
4.5x35
60
2016
HI-0047
No.
012115
908020
PU
100
pc(s)
100
pc(s)
THERM+ H-I
Timber curtain wall
Polygon glazing system 8° to 15°
Mullion section exterior angle
■ Technical information
■ Profiles
– Face width of cover profile depends on angle
and infill thickness.
Article
No.
PU
– Glass bite (A and B) must be min. 13 mm.
The distance between glass edge and gasket
cap (C) has to be min. 3 mm.
Cover profile 76/15
013050
6m
Pressure profile 73
punched
118015
6m
– Please note the glass tolerances!
Base profile 47 punched
145010
6m
No.
PU
011810
100 m
150140
20 m
No.
PU
■ Gaskets
Article
Gasket for pressure
profile 8° to 15°
Gasket for mullion 56
polygonal 8° to 20°
■ Accessories
Article
Pan head tapping screw
5.5x45
Special timber screw
4.5x35
HI-0136
012115
908020
2016
100
pc(s)
100
pc(s)
61
THERM+ H-I
System sections
System sections 56 mm
THERM+ H-I
System sections 56 mm
Timber curtain wall
Polygon glazing system 8° to 20° and 21° to 33° with polygon interior and exterior gasket
Mullion section exterior angle
■ Technical information
■ Profiles
– Insulating strips available on demand.
Article
Cover profile 56/15
No.
PU
013023
6m
Profile polygonal
8° to 20°
Profile polygonal
21° to 33°
Pressure profile 53
punched
013800
6m
013801
6m
118010
6m
Base profile 47 punched
145010
6m
No.
PU
011805
100 m
150140
20 m
150145
20 m
■ Gaskets
Article
Gasket for pressure
profile 5 polygonal
Gasket for mullion 56
polygonal 8° to 20°
Gasket for mullion 56
polygonal 21° to 33°
■ Accessories
Article
Pan head tapping screw
5.5x52
Special timber screw
4.5x35
62
2016
HI-0048
No.
012118
908020
PU
100
pc(s)
100
pc(s)
THERM+ H-I
Timber curtain wall
Polygon glazing system 34° to 45° with polygon interior and exterior gasket
Mullion section exterior angle
■ Technical information
■ Profiles
– Insulating strips available on demand.
Article
Cover profile 56/15
Profile polygonal
34° to 45°
Pressure profile 53
punched
Base profile 47
punched
No.
PU
013023
6m
013802
6m
118010
6m
145010
6m
No.
PU
011805
100 m
150150
20 m
■ Gaskets
Article
Gasket for pressure
profile 5 polygonal
Gasket for mullion 56
polygonal 34° to 45°
■ Accessories
Article
Pan head tapping
screw 5.5x60
Special timber screw
4.5x35
HI-0049
No.
012123
908020
2016
PU
100
pc(s)
100
pc(s)
63
THERM+ H-I
System sections
System sections 56 mm
THERM+ H-I
System sections 56 mm
Timber curtain wall
Cover profile options clipped
Mullion section
■ Technical information
■ Profiles
– Slipping down of the cover profiles must
be prevented.
Article
Cover profile 56/15
– For more cover profiles, end caps and belay
sheet see Product range.
64
2016
HI-0054
No.
PU
013023
6m
Cover profile 56/12
013024
6m
Cover profile 56/25
013025
6m
Cover profile 56/25
013400
6m
Cover profile 56/20
013410
6m
Pressure profile 53
punched
118010
6m
Cover profile 56/32
141307
6m
THERM+ H-I
Timber curtain wall
Pressure profile options visible screwed
Mullion section
■ Technical information
■ Profiles
– For more pressure profiles see Product range.
Article
HI-0055
No.
PU
Pressure profile 56/12
013027
6m
Pressure profile 56/9
013028
6m
2016
65
THERM+ H-I
System sections
System sections 56 mm
THERM+ H-I
System sections 56 mm
Timber curtain wall
Flat pressure profile options
Mullion section with three options
■ Technical information
■ Profiles
– Minimum infill thickness 22 mm.
Article
Pressure profile 56/3
No.
PU
013310
6m
No.
PU
220205
100 m
No.
PU
■ Gaskets
Article
Gasket for pressure
profile 2/16
■ Accessories
Article
Flat fillister head screw
5.5x35 with sealing ring
Pan head tapping screw
5.5x35
Pan head tapping screw
5.5x38 with sealing ring
Cover 11 S
66
2016
HI-0056
012011
012111
012175
014110
100
pc(s)
100
pc(s)
100
pc(s)
100
pc(s)
THERM+ H-I
Timber curtain wall
Flat pressure profile options for polygon glazing system 3° to 7° with standard interior gasket
Mullion section exterior angle
■ Technical information
■ Profiles
– Minimum infill thickness 22 mm.
Article
– Selection of pressure profiles according to
infill thickness and angle.
Pressure profile 56/3
No.
PU
013310
6m
No.
PU
011850
200 m
No.
PU
■ Gaskets
Article
Gasket for pressure
profile 3 polygonal 3° to 7°
■ Accessories
Article
Flat fillister head screw
5.5x35 with sealing ring
Pan head tapping screw
5.5x35
Pan head tapping screw
5.5x38 with sealing ring
Cover 11 S
HI-0163
012011
012111
012175
014110
2016
100
pc(s)
100
pc(s)
100
pc(s)
100
pc(s)
67
THERM+ H-I
System sections
System sections 56 mm
THERM+ H-I
System sections 76 mm
Timber curtain wall
Certified passive house curtain wall with insulating block P 76/39
Mullion section/transom section
■ Technical information
■ Profiles
– Certified by passive house institute Dr. Feist.
Article
No.
PU
– Uf -values see chapter Thermal insulation.
Cover profile 76/15
013050
6m
Cover profile 76/12
013051
6m
Pressure profile 73
punched
118015
6m
Base profile 67 punched
145015
6m
– T1 = Depths from 50 mm.
■ Gaskets
Article
No.
PU
Gasket for pressure
profile 5
011073
100 m
Gasket for mullion 76
150205
20 m
Gasket for transom 76
150210
20 m
Insulating block P 76/39
168526
50 m
No.
PU
012029
100
pc(s)
012124
100
pc(s)
016056
10 pc(s)
152020
100
pc(s)
152421
10 pc(s)
Glass carrier 43 to 44
162080
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
■ Accessories
Article
Special countersunk
sheet metal screw
5.5x24
Pan head tapping screw
5.5x62
Cross point sealing plate
76 P
Sealing piece
for transom 76
Sealing piece
for pressure profile 76/5
68
2016
HI-0144
THERM+ H-I
■ Technical information
■ Profiles
– Certified by passive house institute Dr. Feist.
Article
No.
PU
– Uf -values see chapter Thermal insulation.
Cover profile 76/15
013050
6m
Cover profile 76/12
013051
6m
118015
6m
145031
6m
– T1 = Depths from 50 mm.
Pressure profile 73
punched
Base profile 67 with foot
punched
■ Gaskets
Article
No.
PU
Gasket for pressure
profile 5
011073
100 m
Gasket for mullion 76
150205
20 m
Gasket for transom 76
150210
20 m
Insulating block P 76/39
168526
50 m
No.
PU
012029
100
pc(s)
012124
100
pc(s)
014037
10 pc(s)
016056
10 pc(s)
152020
100
pc(s)
Glass carrier 43 to 44
162080
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
■ Accessories
Article
Special countersunk
sheet metal screw
5.5x24
Pan head tapping screw
5.5x62
Sealing piece for pressure profile 76
Cross point sealing plate
76 P
Sealing piece for transom 76
HI-0157
2016
69
System sections
Timber curtain wall
Certified passive house curtain wall, insulating block P 76/39, base profile for groove installation
Mullion section/transom section
THERM+ H-I
System sections 76 mm
THERM+ H-I
System sections 76 mm
Timber curtain wall
Insulating block P 76/19
Mullion section/transom section
■ Technical information
■ Profiles
– The type of insulating block P depends on the infill
thickness:
- 24 to 29 mm: insulating block P 76/19, No. 168521
- 30 to 64 mm: insulating block P 76/25, No. 168522.
Article
– Uf -values see chapter Thermal insulation.
– T1 = Depths from 50 mm.
No.
PU
Cover profile 76/15
013050
6m
Cover profile 76/12
013051
6m
Pressure profile 73
punched
118015
6m
Base profile 67 punched
145015
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
Gasket for mullion 76
150205
20 m
Gasket for transom 76
150210
20 m
Insulating block P 76/19
168521
50 m
No.
PU
012029
100
pc(s)
012114
100
pc(s)
014037
10 pc(s)
016052
10 pc(s)
152020
100
pc(s)
Glass carrier 25 to 26
162035
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
■ Accessories
Article
Special countersunk
sheet metal screw
5.5x24
Pan head tapping screw
5.5x42
Sealing piece
for pressure profile 76
Crosspoint sealing plate
76
Sealing piece
for transom 76
70
2016
HI-0101
THERM+ H-I
■ Technical information
■ Profiles
– Uf -values see chapter Thermal insulation.
Article
– T1 = Depths from 50 mm.
No.
PU
Cover profile 76/15
013050
6m
Cover profile 76/12
013051
6m
Pressure profile 73
punched
118015
6m
Base profile 67 punched
145015
6m
■ Gaskets
Article
No.
PU
Gasket for mullion 76
150205
20 m
Gasket for transom 76
150210
20 m
Insulating block 76/17
151035
50 m
No.
PU
012029
100
pc(s)
012114
100
pc(s)
014037
10 pc(s)
016052
10 pc(s)
152020
100
pc(s)
Glass carrier 25 to 26
162035
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
■ Accessories
Article
Special countersunk
sheet metal screw
5.5x24
Pan head tapping screw
5.5x42
Sealing piece
for pressure profile 76
Crosspoint sealing plate
76
Sealing piece
for transom 76
HI-0068
2016
71
System sections
Timber curtain wall
Insulating block 17
Mullion section/transom section
THERM+ H-I
System sections 76 mm
THERM+ H-I
System sections 76 mm
Timber curtain wall
Insulating block 9
Mullion section/transom section
■ Technical information
■ Profiles
– Uf -values see chapter Thermal insulation.
Article
– T1 = Depths from 50 mm.
No.
PU
Cover profile 76/15
013050
6m
Cover profile 76/12
013051
6m
Pressure profile 73
punched
118015
6m
Base profile 67 punched
145015
6m
■ Gaskets
Article
No.
PU
Gasket for mullion 76
150205
20 m
Gasket for transom 76
150210
20 m
Insulating block 76/9
151030
50 m
No.
PU
012029
100
pc(s)
012114
100
pc(s)
014037
10 pc(s)
016052
10 pc(s)
152020
100
pc(s)
Glass carrier 25 to 26
162035
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
■ Accessories
Article
Special countersunk
sheet metal screw
5.5x24
Pan head tapping screw
5.5x42
Sealing piece
for pressure profile 76
Crosspoint sealing plate
76
Sealing piece
for transom 76
72
2016
HI-0065
THERM+ H-I
■ Technical information
■ Profiles
– Uf -values see chapter Thermal insulation.
Article
– T1 = Depths from 50 mm.
No.
PU
Cover profile 76/15
013050
6m
Cover profile 76/12
013051
6m
Pressure profile 73
punched
118015
6m
Base profile 67 punched
145015
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
Gasket for mullion 76
150205
20 m
Gasket for transom 76
150210
20 m
No.
PU
012029
100
pc(s)
012114
100
pc(s)
014037
10 pc(s)
016052
10 pc(s)
152020
100
pc(s)
Glass carrier 25 to 26
162035
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
■ Accessories
Article
Special countersunk
sheet metal screw
5.5x24
Pan head tapping screw
5.5x42
Sealing piece
for pressure profile 76
Crosspoint sealing plate
76
Sealing piece
for transom 76
HI-0060
2016
73
System sections
Timber curtain wall
Standard exterior gasket
Mullion section/transom section
THERM+ H-I
System sections 76 mm
THERM+ H-I
System sections 76 mm
90°
Timber curtain wall
Corner mullion 90°, vertical
Mullion section/transom section
■ Profiles
Article
No.
PU
Cover profile 56/15
013023
6m
Pressure profile 53
punched
118010
6m
Base profile 47 punched
145010
6m
Connection profile 39/22
168021
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
Gasket for mullion 56
150105
20 m
Compensation gasket 2
227010
100 m
■ Accessories
Article
Pan head tapping screw
5.5x42
Special timber screw
4.5x35
Special countersunk
sheet metal screw
4.8x19
74
2016
HI-0186
No.
012114
908020
908118
PU
100
pc(s)
100
pc(s)
100
pc(s)
THERM+ H-I
■ Profiles
Article
No.
PU
Cover profile 56/15
013023
6m
Pressure profile 53
punched
118010
6m
Base profile 47 punched
145010
6m
Connection profile 39/22
168021
6m
■ Gaskets
Article
No.
Gasket for pressure prof. 3 011070.LI
PU
100 m
Gasket for pressure prof. 3 011070.RE 100 m
Gasket for mullion 56
150105
20 m
Compensation gasket 2
227010
100 m
■ Accessories
Article
Special timber screw
4.5x35
Special countersunk
sheet metal screw
4.8x19
HI-0187
No.
PU
908020
100
pc(s)
908118
100
pc(s)
2016
75
System sections
Timber curtain wall
Corner mullion for variable angles, vertical
Mullion section/transom section
THERM+ H-I
System sections 76 mm
THERM+ H-I
System sections 76 mm
Timber curtain wall
Gasket for transom with flap between mullions
Transom section
■ Technical information
■ Profiles
– Available for all insulating blocks.
Article
– T1 = Depths from 50 mm.
No.
PU
Cover profile 76/12
013051
6m
Pressure profile 73
punched
118015
6m
Base profile 67 punched
145015
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
150215
20 m
No.
PU
012029
100
pc(s)
012114
100
pc(s)
014037
10 pc(s)
Crosspoint sealing plate 76
016052
10 pc(s)
Sealing piece
for transom 76
152020
100
pc(s)
Glass carrier 25 to 26
162035
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
Gasket for transom 76
with flap
■ Accessories
Article
Special countersunk
sheet metal screw
5.5x24
Pan head tapping screw
5.5x42
Sealing piece
for pressure profile 76
76
2016
HI-0061
THERM+ H-I
■ Technical information
■ Profiles
– Available for all insulating blocks.
Article
– Base gasket available up to an infill thickness
of 64 mm.
– T1 = Depths from 50 mm.
No.
PU
Cover profile 76/12
013051
6m
Pressure profile 73
punched
118015
6m
Base profile 67 punched
145015
6m
Connection profile 36/22
168005
6m
■ Gaskets
Article
No.
PU
Gasket for pressure prof. 3 011070.LI
100 m
Gasket for pressure prof. 3 011070.RE
100 m
Base gasket for transom
76 with flap
150220
20 m
No.
PU
012029
100
pc(s)
012114
100
pc(s)
014037
10 pc(s)
016052
10 pc(s)
152020
100
pc(s)
152070
10 pc(s)
Glass carrier 25 to 26
162035
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
■ Accessories
Article
Special countersunk
sheet metal screw
5.5x24
Pan head tapping screw
5.5x42
Sealing piece
for pressure profile 76
Crosspoint sealing plate 76
Sealing piece
for transom 76
Sealing piece
for base transom
HI-0062
2016
77
System sections
Timber curtain wall
Continuous base gasket with flap
Transom section
THERM+ H-I
System sections 76 mm
THERM+ H-I
System sections 76 mm
Timber curtain wall
Timber cover profile clipped
Mullion section/transom section
■ Technical information
■ Profiles
– Timber cover profiles are products complementary to
the RAICO system components, supplied by the fabricator.
It must be assured that the function of the glazing system
remains guaranteed by adaptation of the constructional
and material characteristics of the timber cover profile.
– The norms and regulations concerning the use of timber
in exterior building areas must be respected.
Article
No.
PU
Pressure profile 70
punched
118515
6m
Base profile 67 punched
145015
6m
No.
PU
Gasket for mullion 76
150205
20 m
Gasket for transom 76
150210
20 m
Gasket for pressure
profile 7 H
150510
100 m
■ Gaskets
– Timber cover profiles must be secured mechanically
after their installation.
Article
– For further information see Processing.
– T1 = Depths from 50 mm.
■ Accessories
Article
Pan head tapping screw
5.5x42
Sealing piece
for pressure profile 76
Crosspoint sealing plate
76
Sealing piece
for transom 76
78
2016
HI-0109
No.
PU
012114
100
pc(s)
014037
10 pc(s)
016052
10 pc(s)
152020
Cover profile fixation 80
167005
Special timber screw
4.5x35
908020
100
pc(s)
100
pc(s)
100
pc(s)
THERM+ H-I
■ Technical information
■ Profiles
– For the alternative solution (direct screw
connection) attention shall be paid to observing
a sufficient tolerance compensation
(see Processing).
Article
No.
PU
Cover profile 76/12
013051
6m
Pressure profile 73
punched
118015
6m
Base profile 67 punched
145015
6m
Connection profile 45/42
168060
6m
■ Gaskets
Article
No.
Gasket for pressure prof. 3 011070.LI
PU
100 m
Gasket for pressure prof. 3 011070.RE
100 m
Gasket for pressure prof. 7
011074
100 m
Gasket for transom 76
with flap
150215
20 m
No.
PU
012029
100 pc(s)
012113
100 pc(s)
Glass carrier 25 to 26
162035
10 pc(s)
Special timber screw
4.5x35
908020
100 pc(s)
Terminal clamp 47/22
915501
100 pc(s)
2016
79
■ Accessories
Article
Special countersunk
sheet metal screw
5.5x24
Pan head tapping screw
5.5x40
HI-0190
System sections
Timber curtain wall
Connection of ventilated/non-ventilated curtain wall
Transom section
THERM+ H-I
System sections 76 mm
THERM+ H-I
System sections 76 mm
Timber curtain wall
Interior compensation of varying infill thicknesses
Mullion section/transom section
■ Technical information
■ Profiles
– Difference between the glass thicknesses
from 10 to 24 mm can be compensated
without exterior glass offset.
Article
Cover profile 76/15
Compensation profile
7/23
Pressure profile 73
punched
– T1 = Depths from 50 mm.
Base profile 67 punched
No.
PU
013050
6m
116005
6m
118015
6m
145015
6m
■ Gaskets
Article
No.
PU
Gasket for pressure prof. 3 011070.LI
100 m
Gasket for pressure prof. 3 011070.RE
100 m
Gasket for mullion 76
150205
20 m
Gasket for transom 76
150210
20 m
Interior gasket 5
220321
100 m
No.
PU
012029
100 pc(s)
012103
100 pc(s)
012118
100 pc(s)
014037
10 pc(s)
Crosspoint sealing plate 76
016052
10 pc(s)
Sealing piece
for transom 76
152020
100 pc(s)
Glass carrier 33 to 34
162055
10 pc(s)
Special timber screw
4.5x35
908020
100 pc(s)
Fixture spring 39/25/10
915020
50 pc(s)
■ Accessories
Article
Special countersunk
sheet metal screw 5.5x24
Flat fillister head screw
5.5x19
Pan head tapping screw
5.5x52
Sealing piece
for pressure profile 76
80
2016
HI-0064
THERM+ H-I
■ Technical information
■ Profiles
– Depending on the infill thickness the following gaskets
for pressure profile must be used:
- Infill thickness 10 to 11 mm: gaskets for pressure profile 5 mm
- Infill thickness 12 mm: gaskets for pressure profile 3 mm.
– T1 = Depths from 50 mm.
Article
No.
PU
Cover profile 76/15
013050
6m
Cover profile 76/12
013051
6m
Pressure profile 73
punched
118015
6m
Base profile 67 punched
145015
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
Gasket for mullion 76
150205
20 m
Gasket for transom 76
150210
20 m
No.
PU
012029
100
pc(s)
012108
100
pc(s)
014037
10 pc(s)
016052
10 pc(s)
152020
100
pc(s)
Glass carrier 10 to 14
162005
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
■ Accessories
Article
Special countersunk
sheet metal screw
5.5x24
Pan head tapping screw
5.5x28
Sealing piece
for pressure profile 76
Crosspoint sealing plate
76
Sealing piece
for transom 76
HI-0063
2016
81
System sections
Timber curtain wall
Single glazing
Mullion section/transom section
THERM+ H-I
System sections 76 mm
THERM+ H-I
System sections 76 mm
Timber curtain wall
Polygon glazing system with standard interior gasket 1° to 7°
Mullion section exterior angle/interior angle
■ Technical information
■ Profiles
– With exterior gasket for pressure profile 5 mm
and standard interior gasket to max. 7°.
Article
No.
PU
Cover profile 76/15
013050
6m
Pressure profile 73
punched
118015
6m
Base profile 67 punched
145015
6m
■ Gaskets
Article
No.
PU
Gasket for pressure
profile 5
011073
100 m
Gasket for mullion 76
150205
20 m
■ Accessories
Article
Pan head tapping screw
5.5x45
Special timber screw
4.5x35
82
2016
HI-0069
No.
012115
908020
PU
100
pc(s)
100
pc(s)
THERM+ H-I
■ Technical information
■ Profiles
– Face width of cover profile depends on angle
and infill thickness.
Article
– Glass bite (A and B) must be min. 15 mm.
The distance between glass edge and gasket
cap (C) has to be min 3 mm.
– Please note the glass tolerances!
No.
PU
Pressure profile 93
punched
118020
6m
Cover profile 96/15
141710
6m
Base profile 67 punched
145015
6m
No.
PU
011810
100 m
150240
20 m
No.
PU
■ Gaskets
Article
Gasket for pressure
profile 8° to 15°
Gasket for mullion 76
polygonal 8° to 20°
■ Accessories
Article
Pan head tapping screw
5.5x42
Special timber screw
4.5x35
HI-0205
012114
908020
2016
100
pc(s)
100
pc(s)
83
System sections
Timber curtain wall
Polygon glazing system 8° to 15°
Mullion section exterior angle
THERM+ H-I
System sections 76 mm
THERM+ H-I
System sections 76 mm
Timber curtain wall
Cover profile options clipped
Mullion section
■ Technical information
84
■ Profiles
– Slipping down of the cover profiles must
be prevented.
Article
No.
PU
– For more cover profiles, end caps and belay
sheet see Product range.
Cover profile 76/15
013050
6m
Cover profile 76/12
013051
6m
Cover profile 76/20
013610
6m
Cover profile 76/25
013615
6m
Pressure profile 73
punched
118015
6m
Cover profile 76/25
141505
6m
2016
HI-0071
THERM+ H-I
■ Technical information
■ Profiles
– Minimum infill thickness 22 mm.
Article
Pressure profile 76/3
No.
PU
013313
6m
No.
PU
220205
100 m
No.
PU
■ Gaskets
Article
Gasket for pressure
profile 2/16
■ Accessories
Article
Flat fillister head screw
5.5x32 with sealing ring
Pan head tapping screw
5.5x35
Pan head tapping screw
5.5x35 with sealing ring
Cover 11 S
HI-0116
012010
012111
012174
014110
2016
100
pc(s)
100
pc(s)
100
pc(s)
100
pc(s)
85
System sections
Timber curtain wall
Flat pressure profile options
Mullion section with three options
THERM+ H-I
System sections 76 mm
THERM+ H-I
System sections 76 mm
Timber curtain wall
Flat pressure profile options for polygon glazing system 3° to 7° with standard interior gasket
Mullion section exterior angle
■ Technical information
■ Profiles
– Minimum infill thickness 22 mm.
Article
– Selection of pressure profiles according to
infill thickness and angle.
Pressure profile 76/3
No.
PU
013313
6m
No.
PU
011850
200 m
No.
PU
■ Gaskets
Article
Gasket for pressure
profile 3 polygonal 3° to 7°
■ Accessories
Article
Flat fillister head screw
5.5x32 with sealing ring
Pan head tapping screw
5.5x35
Pan head tapping screw
5.5x35 with sealing ring
Cover 11 S
86
2016
HI-0164
012010
012111
012174
014110
100
pc(s)
100
pc(s)
100
pc(s)
100
pc(s)
THERM+ H-I
■ Technical information
■ Profiles
– Uf -values see chapter Thermal insulation.
Article
No.
PU
– T1 = Depths from 50 mm.
Pressure profile 93
punched
118020
6m
Cover profile 96/15
141710
6m
Base profile 87 punched
145050
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
150705
20 m
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
Gasket for mullion 96
■ Accessories
Article
Pan head tapping screw
5.5x42
Special timber screw
4.5x35
HI-0137
No.
012114
908020
2016
PU
100
pc(s)
100
pc(s)
87
System sections
Timber curtain wall
Standard exterior gasket
Mullion section
THERM+ H-I
System sections 96 mm
THERM+ H-I
System sections 96 mm
Timber curtain wall
Standard exterior gasket
Transom section
■ Technical information
■ Profiles
– Uf-values see chapter Thermal insulation.
Article
No.
PU
– T1 = Depths from 50 mm.
Pressure profile 93
punched
118020
6m
Cover profile 96/15
141710
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
150710
20 m
No.
PU
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
Gasket for transom 96
■ Accessories
Article
Special countersunk
sheet metal screw 5.5x24
Pan head tapping screw
5.5x42
Sealing piece for
pressure profile 96
Cross point sealing plate
96
88
2016
HI-0138
012029
012114
100
pc(s)
100
pc(s)
152425
10 pc(s)
167480
10 pc(s)
THERM+ H-I
■ Technical information
■ Profiles
– Depending on the infill thickness the following gaskets
for pressure profile must be used:
- Infill thickness 10 to 11 mm: gaskets for pressure profile 5 mm
- Infill thickness from 12 mm: gaskets for pressure profile 3 mm.
– T1 = Depths from 50 mm.
Article
No.
PU
Pressure profile 93
punched
118020
6m
Cover profile 96/15
141710
6m
Base profile 87 punched
145050
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
Gasket for mullion 96
150705
20 m
Gasket for transom 96
150710
20 m
No.
PU
012029
100
pc(s)
012108
100
pc(s)
152425
10 pc(s)
162005
10 pc(s)
167480
10 pc(s)
908020
100
pc(s)
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
■ Accessories
Article
Special countersunk
sheet metal screw
5.5x24
Pan head tapping screw
5.5x28
Sealing piece
for pressure profile 96
T1
Glass carrier 10 to 14
Cross point sealing plate
96
Special timber screw
4.5x35
HI-0159
2016
89
System sections
Timber curtain wall
Single glazing
Mullion section/transom section
THERM+ H-I
System sections 96 mm
THERM+ H-I
System sections 96 mm
Timber curtain wall
Polygon glazing system with standard interior gasket 1° to 7°
Mullion section exterior angle/interior angle
■ Technical information
■ Profiles
– With exterior gasket for pressure profile 5 mm
and standard interior gasket to max. 7°.
Article
No.
PU
Pressure profile 93
punched
118020
6m
Cover profile 96/15
141710
6m
Base profile 87
punched
145050
6m
■ Gaskets
Article
No.
PU
Gasket for pressure
profile 5
011073
100 m
Gasket for mullion 96
150705
20 m
No.
PU
■ Accessories
Article
Pan head tapping
screw 5.5x45
Special timber screw
4.5x35
90
2016
HI-0160
012115
908020
100
pc(s)
100
pc(s)
THERM+ H-I
■ Technical information
■ Profiles
– Slipping down of the cover profiles must
be prevented.
Article
– For more cover profiles, end caps and belay
sheet see Product range.
HI-0161
No.
PU
Pressure profile 93
punched
118020
6m
Cover profile 96/15
141710
6m
2016
91
System sections
Timber curtain wall
Cover profile options clipped
Mullion section
THERM+ H-I
System sections 96 mm
THERM+ H-I
Building connections 50/56/76 mm
Timber curtain wall
Wall connection with thermal insulation system
■ Technical information
– T255 = Vapour-tight membrane no. 951015.
92
2016
HI-1030
THERM+ H-I
■ Technical information
– T128 = Breather membrane no. 951029.
– T251 = Make provision for insect screen.
– T255 = Vapour-tight membrane no. 951015.
HI-1031
2016
93
System sections
Timber curtain wall
Wall connection with ventilated façade panelling
THERM+ H-I
Building connections 50/56/76 mm
THERM+ H-I
Building connections 50/56 mm
Timber curtain wall
Wall connection structural glazing SG2 with thermal insulation system
■ Technical information
– Approval required in individual cases.
– T129 = Vapour-tight membrane no. 951019.
94
2016
HI-1032
THERM+ H-I
■ Technical information
– *Mask joint of mullion-transom or carry out vapour-tight.
– T126 = Vapour-tight membrane no. 951021.
– T249 = Execution vapour-tight or as breather membrane
depending on installation-site.
– T250 = Insulation with mineral cotton when required.
HI-1033
2016
95
System sections
Timber curtain wall
Base connection with drainage to the front
THERM+ H-I
Building connections 50/56/76 mm
THERM+ H-I
Building connections 50/56/76 mm
Timber curtain wall
Base connection with drainage to the bottom
■ Technical information
– *Mask joint of mullion-transom or carry out vapour-tight.
– T126 = Vapour-tight membrane no. 951021.
– T249 = Execution vapour-tight or as breather membrane
depending on installation-site.
– T250 = Insulation with mineral cotton when required.
– T251 = Make provision for insect screen.
96
2016
HI-1034
THERM+ H-I
■ Technical information
– Connection profile no. 168080:
- Continuous insertion for bottom and top connection.
- Cut out in mullion area for drainage/ventilation.
– *Mask joint of mullion-transom or carry out vapour-tight.
– Observe the different rates of thermal expansion for the screw connection
of the aluminium window sill with the synthetic connection profile.
– T129 = Vapour-tight membrane no. 951019.
– T251 = Make provision for insect screen.
– T252 = Breather membrane no. 951031.
HI-1035
2016
97
System sections
Timber curtain wall
Base connection with frame profile
THERM+ H-I
Building connections 50/56/76 mm
THERM+ H-I
Building connections 50/56/76 mm
Timber curtain wall
Ceiling connection as non-locating bearing with thermal insulation system
■ Technical information
– T126 = Vapour-tight membrane no. 951021.
98
2016
HI-1036
THERM+ H-I
■ Technical information
– T126 = Vapour-tight membrane no. 951021.
– T251 = Make provision for insect screen.
– T252 = Breather membrane no. 951031.
HI-1037
2016
99
System sections
Timber curtain wall
Ceiling connection as non-locating bearing with ventilated façade panelling
THERM+ H-I
Building connections 50/56/76 mm
THERM+ H-I
Building connections 50/56/76 mm
Timber curtain wall
Intermediate ceiling with curtain wall and panel joint
■ Technical information
– *Mask joint of mullion-transom or carry out vapour-tight.
– Pressure relief of the region behind the panel by cuttings
in the mullion gasket.
– T30 = Notching.
– T124 = Breather membrane.
– T129 = Vapour-tight membrane no. 951019.
– T253 = Insulation with
non-flammable
mineral-cotton.
– T254 = Seal joints.
100
2016
HI-1038
THERM+ H-I
■ Technical information
– *Mask joint of mullion-transom
or carry out vapour-tight.
– Pressure relief of the region behind
the panel by cuttings in the mullion gasket.
– Stabilisation of the panel in the
upper region when required.
– T30 = Notching.
– T124 = Breather membrane.
– T129 = Vapour-tight membrane
no. 951019.
– T253 = Insulation with
non-flammable
mineral-cotton.
– T254 = Seal joints.
HI-1039
2016
101
System sections
Timber curtain wall
Intermediate ceiling with inserted construction and panel joint
THERM+ H-I
Building connections 50/56/76 mm
THERM+ H-I
Building connections 50/56/76 mm
Timber curtain wall
Attic with exposed curtain wall
■ Technical information
– T126 = Vapour-tight membrane no. 951021.
– T251 = Make provision for insect screen.
– T252 = Breather membrane no. 951031.
102
2016
HI-1040
THERM+ H-I
■ Technical information
– T124 = Breather membrane.
– T126 = Vapour-tight membrane
no. 951021.
– T251 = Make provision
for insect screen.
– T252 = Breather membrane
no. 951031.
HI-1041
2016
103
System sections
Timber curtain wall
Attic with inserted curtain wall with ventilated façade panelling
THERM+ H-I
Building connections 50/56/76 mm
104
2016
Content
Burglar prevention
System benefits
Sections resistance class WK2
Sections resistance class WK3
Screw selection WK2/WK3
107
109
123
137
Fire protection
System benefits
Sections fire protection F30 (EI30)
Screw selection
Selection glass carriers
141
143
146
147
Structural Glazing
System benefits
Sections Structural Glazing SG2
Exterior sealing
Screw selection
Selection insulating block
Selection glass carriers
Suction discs
Indications for the execution of silicone joints
149
151
154
157
158
159
160
162
2016
105
THERM+ H-I
Add-ons
Add-ons
106
2016
THERM+ H-I
System benefits
Timber curtain wall 50/56/76 mm
Burglar-resistant curtain walls – Technology in detail
■ Features burglar-resistant curtain wall
THERM+ H-I
Add-ons
– Resistance classes WK2 and WK3.
-
WK2:
- Additional shimming with glass carriers.
- Balls in the screw heads.
WK3:
- Additional shimming with glass carriers.
- Balls in the screw heads.
- Pressure profile reinforcement.
- Reinforced screwing in the screw channel.
– Only few additional components.
– No visual difference between the variations.
– A huge selection of pressure and cover profiles.
– System widths and infill thicknesses identical to the basic system.
– For skylight glazing.
– Simple and efficient assembly.
– Extension by the use of insertion elements of FRAME+ and WING.
Resistance class WK2
Resistance class WK3
SH-0002
2016
107
108
2016
THERM+ H-I
Burglar-resistant curtain wall WK2
Timber curtain wall
Standard exterior gasket
Mullion section/transom section 50 mm
■ Profiles
– Burglar-resistant curtain wall WK2 (EF1)
acc. to DIN EN 1627 (DIN V 18054).
Article
– Glazing class WK2-P4A (old A3).
– For blocking of the glass unit
see Processing.
– T1 = Depths from 50 mm.
– T17 = Depths from 80 mm.
No.
PU
Cover profile 50/15
013003
6m
Cover profile 50/20
013210
6m
Pressure profile 47
punched
118005
6m
Base profile 41 punched
145005
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
Gasket for mullion 50
150005
20 m
Gasket for transom 50
150010
20 m
No.
PU
012029
100
pc(s)
012153
100
pc(s)
014035
10 pc(s)
014060
100
pc(s)
016050
10 pc(s)
152010
100
pc(s)
Glass carrier 25 to 26
162035
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
■ Accessories
22 - 64 mm
Article
Special countersunk
sheet metal screw
5.5x24
Flat fillister head screw
5.5x42
Sealing piece
for pressure profile 50
Bullet for screw heads
Crosspoint sealing plate
50
Sealing piece
for transom 50
22 - 64 mm
HWK-0001
2016
109
THERM+ H-I
Add-ons
■ Technical information
THERM+ H-I
Burglar-resistant curtain wall WK2
Timber curtain wall
Gasket for transom with flap between mullions
Transom section 50 mm
■ Technical information
■ Profiles
– Burglar-resistant curtain wall WK2 (EF1)
acc. to DIN EN 1627 (DIN V 18054).
Article
– Glazing class WK2-P4A (old A3).
– For blocking of the glass unit
see Processing.
– T1 = Depths from 50 mm.
No.
PU
Cover profile 50/12
013004
6m
Pressure profile 47
punched
118005
6m
Base profile 41 punched
145005
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
150015
20 m
No.
PU
012029
100
pc(s)
012153
100
pc(s)
014035
10 pc(s)
014060
100
pc(s)
016050
10 pc(s)
152010
100
pc(s)
Glass carrier 25 to 26
162035
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
Gasket for transom 50
with flap
■ Accessories
Article
Special countersunk
sheet metal screw
5.5x24
Flat fillister head screw
5.5x42
Sealing piece
for pressure profile 50
Bullet for screw heads
Crosspoint sealing plate
50
Sealing piece
for transom 50
22 - 64 mm
110
2016
HWK-0056
THERM+ H-I
Burglar-resistant curtain wall WK2
Timber curtain wall
Continuous base gasket with flap
Transom section 50 mm
■ Profiles
– Burglar-resistant curtain wall WK2 (EF1)
acc. to DIN EN 1627 (DIN V 18054).
Article
– Glazing class WK2-P4A (old A3).
No.
PU
Cover profile 50/15
013003
6m
Pressure profile 47
punched
118005
6m
– For blocking of the glass unit
see Processing.
Base profile 41 punched
145005
6m
– T1 = Depths from 50 mm.
Connection profile 36/22
168005
6m
■ Gaskets
Article
No.
Gasket for pressure prof. 3 011070.LI
PU
100 m
Gasket for pressure prof. 3 011070.RE
100 m
Compensation gasket 2
011080
100 m
Base gasket for transom
50 with flap
150020
20 m
No.
PU
012029
100 pc(s)
012153
100 pc(s)
014035
10 pc(s)
014060
100 pc(s)
016050
10 pc(s)
152010
100 pc(s)
152070
10 pc(s)
Glass carrier 25 to 26
162035
10 pc(s)
Special timber screw
4.5x35
908020
100 pc(s)
2016
111
■ Accessories
Article
Special countersunk
sheet metal screw
5.5x24
Flat fillister head screw
5.5x42
Sealing piece
for pressure profile 50
Bullet for screw heads
Crosspoint sealing plate
50
Sealing piece
for transom 50
Sealing piece
for base transom
22 - 64 mm
HWK-0002
THERM+ H-I
Add-ons
■ Technical information
THERM+ H-I
Burglar-resistant curtain wall WK2
Timber curtain wall
Cover profile options clipped
Mullion section 50 mm
■ Technical information
■ Profiles
– Burglar-resistant curtain wall WK2 (EF1)
acc. to DIN EN 1627 (DIN V 18054).
Article
– Glazing class WK2-P4A (old A3).
– Slipping down of the cover profiles
must be prevented.
– For more cover profiles, end caps and
belay sheet see Product range.
112
2016
HWK-0003
No.
PU
Cover profile 50/15
013003
6m
Cover profile 50/12
013004
6m
Cover profile 50/25
013005
6m
Cover profile 50/25
013201
6m
Cover profile 50/20
013210
6m
Pressure profile 47
punched
118005
6m
Cover profile 50/30
141106
6m
THERM+ H-I
Burglar-resistant curtain wall WK2
Timber curtain wall
Pressure profile options visible screwed
Mullion section 50 mm
■ Profiles
– Burglar-resistant curtain wall WK2 (EF1)
acc. to DIN EN 1627 (DIN V 18054).
Article
Pressure profile 50/12
– Glazing class WK2-P4A (old A3).
– For more pressure profiles see Product range.
HWK-0004
No.
PU
013007
6m
Pressure profile 50/9
013008
6m
Pressure profile 50/25
013014
6m
Pressure profile 50/3
013300
6m
2016
113
THERM+ H-I
Add-ons
■ Technical information
THERM+ H-I
Burglar-resistant curtain wall WK2
Timber curtain wall
Standard exterior gasket
Mullion section/transom section 56 mm
■ Technical information
■ Profiles
– Burglar-resistant curtain wall WK2 (EF1)
acc. to DIN EN 1627 (DIN V 18054).
Article
– Glazing class WK2-P4A (old A3).
– For blocking of the glass unit
see Processing.
– T1 = Depths from 50 mm.
– T17 = Depths from 80 mm.
No.
PU
Cover profile 56/15
013023
6m
Cover profile 56/20
013410
6m
Pressure profile 53
punched
118010
6m
Base profile 47 punched
145010
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
Gasket for mullion 56
150105
20 m
Gasket for transom 56
150110
20 m
No.
PU
012029
100
pc(s)
012153
100
pc(s)
014036
10 pc(s)
014060
100
pc(s)
016051
10 pc(s)
152015
100
pc(s)
Glass carrier 25 to 26
162035
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
■ Accessories
Article
Special countersunk
sheet metal screw
5.5x24
Flat fillister head screw
5.5x42
Sealing piece
for pressure profile 56
Bullet for screw heads
Crosspoint sealing plate
56
Sealing piece
for transom 56
114
2016
HWK-0011
THERM+ H-I
Burglar-resistant curtain wall WK2
Timber curtain wall
Gasket for transom with flap between mullions
Transom section 56 mm
■ Profiles
– Burglar-resistant curtain wall WK2 (EF1)
acc. to DIN EN 1627 (DIN V 18054).
Article
– Glazing class WK2-P4A (old A3).
– For blocking of the glass unit
see Processing.
– T1 = Depths from 50 mm.
No.
PU
Cover profile 56/12
013024
6m
Pressure profile 53
punched
118010
6m
Base profile 47 punched
145010
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
150115
20 m
No.
PU
012029
100
pc(s)
012153
100
pc(s)
014036
10 pc(s)
014060
100
pc(s)
016051
10 pc(s)
152015
100
pc(s)
Glass carrier 25 to 26
162035
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
THERM+ H-I
Add-ons
■ Technical information
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
Gasket for transom 56
with flap
■ Accessories
Article
Special countersunk
sheet metal screw
5.5x24
Flat fillister head screw
5.5x42
Sealing piece
for pressure profile 56
Bullet for screw heads
Crosspoint sealing plate
56
Sealing piece
for transom 56
22 - 64 mm
HWK-0057
2016
115
THERM+ H-I
Burglar-resistant curtain wall WK2
Timber curtain wall
Continuous base gasket with flap
Transom section 56 mm
■ Technical information
■ Profiles
– Burglar-resistant curtain wall WK2 (EF1)
acc. to DIN EN 1627 (DIN V 18054).
Article
No.
PU
Cover profile 56/15
013023
6m
– For blocking of the glass unit
see Processing.
Pressure profile 53
punched
118010
6m
Base profile 47 punched
145010
6m
– T1 = Depths from 50 mm.
Connection profile 36/22
168005
6m
– Glazing class WK2-P4A (old A3).
■ Gaskets
Article
No.
PU
Gasket for pressure prof. 3 011070.LI
100 m
Gasket for pressure prof. 3 011070.RE
100 m
Compensation gasket 2
011080
100 m
Base gasket for transom
56 with flap
150120
20 m
No.
PU
012029
100 pc(s)
012153
100 pc(s)
014036
10 pc(s)
014060
100 pc(s)
016051
10 pc(s)
152015
100 pc(s)
152070
10 pc(s)
Glass carrier 25 to 26
162035
10 pc(s)
Special timber screw
4.5x35
908020
100 pc(s)
■ Accessories
Article
Special countersunk
sheet metal screw
5.5x24
Flat fillister head screw
5.5x42
Sealing piece
for pressure profile 56
Bullet for screw heads
Crosspoint sealing plate
56
Sealing piece
for transom 56
Sealing piece
for base transom
22 - 64 mm
116
2016
HWK-0012
THERM+ H-I
Burglar-resistant curtain wall WK2
Timber curtain wall
Cover profile options clipped
Mullion section 56 mm
■ Profiles
– Burglar-resistant curtain wall WK2 (EF1)
acc. to DIN EN 1627 (DIN V 18054).
Article
Cover profile 56/15
– Glazing class WK2-P4A (old A3).
– Slipping down of the cover profiles
must be prevented.
– For more cover profiles, end caps and
belay sheet see Product range.
HWK-0013
No.
PU
013023
6m
Cover profile 56/12
013024
6m
Cover profile 56/25
013025
6m
Cover profile 56/25
013400
6m
Cover profile 56/20
013410
6m
Pressure profile 53
punched
118010
6m
Cover profile 56/32
141307
6m
2016
117
THERM+ H-I
Add-ons
■ Technical information
THERM+ H-I
Burglar-resistant curtain wall WK2
Timber curtain wall
Pressure profile options visible screwed
Mullion section 56 mm
■ Technical information
■ Profiles
– Burglar-resistant curtain wall WK2 (EF1)
acc. to DIN EN 1627 (DIN V 18054).
Article
– Glazing class WK2-P4A (old A3).
– For more pressure profiles see Product range.
118
2016
HWK-0014
No.
PU
Pressure profile 56/12
013027
6m
Pressure profile 56/9
013028
6m
Pressure profile 56/3
013310
6m
THERM+ H-I
Burglar-resistant curtain wall WK2
Timber curtain wall
Standard exterior gasket
Mullion section/transom section 76 mm
■ Profiles
– Burglar-resistant curtain wall WK2 (EF1)
acc. to DIN EN 1627 (DIN V 18054).
Article
– Glazing class WK2-P4A (old A3).
– For blocking of the glass unit
see Processing.
– T1 = Depths from 50 mm.
– T17 = Depths from 80 mm.
No.
PU
Cover profile 76/15
013050
6m
Cover profile 76/20
013610
6m
Pressure profile 73
punched
118015
6m
Base profile 67 punched
145015
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
Gasket for mullion 76
150205
20 m
Gasket for transom 76
150210
20 m
No.
PU
012029
100
pc(s)
012153
100
pc(s)
014037
10 pc(s)
014060
100
pc(s)
016052
10 pc(s)
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
■ Accessories
Article
Special countersunk
sheet metal screw
5.5x24
Flat fillister head screw
5.5x42
Sealing piece
for pressure profile 76
Bullet for screw heads
Crosspoint sealing plate
76
Sealing piece
for transom 76
Special timber screw
4.5x35
HWK-0021
152020
908020
2016
100
pc(s)
100
pc(s)
119
THERM+ H-I
Add-ons
■ Technical information
THERM+ H-I
Burglar-resistant curtain wall WK2
Timber curtain wall
Gasket for transom with flap between mullions
Transom section 76 mm
■ Technical information
■ Profiles
– Burglar-resistant curtain wall WK2 (EF1)
acc. to DIN EN 1627 (DIN V 18054).
Article
No.
PU
Cover profile 76/15
013050
6m
– For blocking of the glass unit see Processing.
Pressure profile 73
punched
118015
6m
– T1 = Depths from 50 mm.
Base profile 67 punched
145015
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
150215
20 m
– Glazing class WK2-P4A (old A3).
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
Gasket for transom 76
with flap
■ Accessories
Article
Pan head tapping screw
5.5x58
Flat fillister head screw
5.5x42
Sealing piece
for pressure profile 76
Bullet for screw heads
Crosspoint sealing plate
76
Sealing piece
for transom 76
Glass carrier 25 to 26
120
2016
HWK-0058
No.
012129
012153
PU
100
pc(s)
100
pc(s)
014037
10 pc(s)
014060
100
pc(s)
016052
10 pc(s)
152020
100
pc(s)
162035
10 pc(s)
THERM+ H-I
Burglar-resistant curtain wall WK2
Timber curtain wall
Continuous base gasket with flap
Transom section 76 mm
■ Profiles
– Burglar-resistant curtain wall WK2 (EF1)
acc. to DIN EN 1627 (DIN V 18054).
Article
– Glazing class WK2-P4A (old A3).
No.
PU
Cover profile 76/15
013050
6m
Pressure profile 73
punched
118015
6m
– For blocking of the glass unit
see Processing.
Base profile 67 punched
145015
6m
– T1 = Depths from 50 mm.
Connection profile 36/22
168005
6m
■ Gaskets
Article
No.
Gasket for pressure prof. 3 011070.LI
PU
100 m
Gasket for pressure prof. 3 011070.RE
100 m
Compensation gasket 2
011080
100 m
Base gasket for transom
76 with flap
150220
20 m
No.
PU
012029
100 pc(s)
012153
100 pc(s)
014037
10 pc(s)
Bullet for screw heads
014060
100 pc(s)
Crosspoint sealing plate 76
016052
10 pc(s)
152020
100 pc(s)
152070
10 pc(s)
Glass carrier 25 to 26
162035
10 pc(s)
Special timber screw
4.5x35
908020
100 pc(s)
2016
121
■ Accessories
Article
Special countersunk
sheet metal screw 5.5x24
Flat fillister head screw
5.5x42
Sealing piece
for pressure profile 76
Sealing piece
for transom 76
Sealing piece
for base transom
22 - 64 mm
HWK-0022
THERM+ H-I
Add-ons
■ Technical information
THERM+ H-I
Burglar-resistant curtain wall WK2
Timber curtain wall
Cover profile options clipped
Mullion section 76 mm
■ Technical information
■ Profiles
– Burglar-resistant curtain wall WK2 (EF1)
acc. to DIN EN 1627 (DIN V 18054).
Article
– Glazing class WK2-P4A (old A3).
– Slipping down of the cover profiles
must be prevented.
– For more cover profiles, end caps and
belay sheet see Product range.
122
2016
HWK-0023
No.
PU
Cover profile 76/15
013050
6m
Cover profile 76/20
013610
6m
Cover profile 76/25
013615
6m
Pressure profile 73
punched
118015
6m
Cover profile 76/25
141505
6m
THERM+ H-I
Burglar-resistant curtain wall WK3
Timber curtain wall
Standard exterior gasket
Mullion section/transom section 50 mm
■ Profiles
– Burglar-resistant curtain wall WK3 (EF1)
acc. to DIN EN 1627 (DIN V 18054).
Article
No.
PU
Cover profile 50/15
013003
6m
Reinforcement
for pressure profile 40
013111
6m
– T17 = Depths from 80 mm.
Cover profile 50/20
013210
6m
– T19 = Depths from 60 mm.
Pressure profile 47
punched
118005
6m
Base profile 41 punched
145005
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
150005
20 m
No.
PU
012029
100
pc(s)
012161
100
pc(s)
014035
10 pc(s)
014060
100
pc(s)
016050
10 pc(s)
152010
100
pc(s)
Glass carrier 31 to 32
162050
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
– Glazing class WK3-P6B (old B1).
– For blocking of the glass unit see Processing.
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
Gasket for mullion 50
■ Accessories
Article
26 - 64 mm
Special countersunk
sheet metal screw
5.5x24
Flat fillister head screw
5.5x62
Sealing piece
for pressure profile 50
Bullet for screw heads
Crosspoint sealing plate
50
Sealing piece
for transom 50
26 - 64 mm
HWK-0031
2016
123
THERM+ H-I
Add-ons
■ Technical information
THERM+ H-I
Burglar-resistant curtain wall WK3
Timber curtain wall
Gasket for transom with flap between mullions
Transom section 50 mm
■ Technical information
■ Profiles
– Burglar-resistant curtain wall WK3 (EF1)
acc. to DIN EN 1627 (DIN V 18054).
Article
No.
PU
013003
6m
013111
6m
118005
6m
145005
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
150015
20 m
No.
PU
012029
100 pc(s)
012161
100 pc(s)
014035
10 pc(s)
014060
100 pc(s)
016050
10 pc(s)
152010
100 pc(s)
152070
10 pc(s)
Glass carrier 31 to 32
162050
10 pc(s)
Special timber screw
4.5x35
908020
100 pc(s)
Cover profile 50/15
– Glazing class WK3-P6B (old B1).
Reinforcement
for pressure profile 40
Pressure profile 47
punched
– For blocking of the glass unit
see Processing.
– T19 = Depths from 60 mm.
Base profile 41 punched
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
Gasket for transom 50
with flap
■ Accessories
Article
Special countersunk
sheet metal screw
5.5x24
Flat fillister head screw
5.5x62
Sealing piece
for pressure profile 50
Bullet for screw heads
Crosspoint sealing plate
50
Sealing piece
for transom 50
Sealing piece for base
transom
26 - 64 mm
124
2016
HWK-0063
THERM+ H-I
Burglar-resistant curtain wall WK3
Timber curtain wall
Continuous base gasket with flap
Transom section 50 mm
■ Profiles
– Burglar-resistant curtain wall WK3 (EF1)
acc. to DIN EN 1627 (DIN V 18054).
Article
No.
PU
013003
6m
013111
6m
118005
6m
Base profile 41 punched
145005
6m
Connection profile 36/22
168005
6m
Cover profile 50/15
– Glazing class WK3-P6B (old B1).
Reinforcement
for pressure profile 40
Pressure profile 47
punched
– For blocking of the glass unit
see Processing.
– T19 = Depths from 60 mm.
■ Gaskets
Article
No.
PU
Gasket for pressure prof. 3 011070.LI
100 m
Gasket for pressure prof. 3 011070.RE
100 m
Gasket for pressure
profile 8
Base gasket for transom
50 with flap
011071
100 m
150020
20 m
No.
PU
012029
100 pc(s)
012161
100 pc(s)
014035
10 pc(s)
Bullet for screw heads
014060
100 pc(s)
Crosspoint sealing plate 50
016050
10 pc(s)
152010
100 pc(s)
152070
10 pc(s)
Glass carrier 31 to 32
162050
10 pc(s)
Special timber screw
4.5x35
908020
100 pc(s)
2016
125
■ Accessories
Article
Special countersunk
sheet metal screw
5.5x24
Flat fillister head screw
5.5x62
Sealing piece
for pressure profile 50
Sealing piece
for transom 50
Sealing piece for base
transom
26 - 64 mm
HWK-0032
THERM+ H-I
Add-ons
■ Technical information
THERM+ H-I
Burglar-resistant curtain wall WK3
Timber curtain wall
Cover profile options clipped
Mullion section 50 mm
■ Technical information
■ Profiles
– Burglar-resistant curtain wall WK3 (EF1)
acc. to DIN EN 1627 (DIN V 18054).
Article
– Glazing class WK3-P6B (old B1).
– Slipping down of the cover profiles
must be prevented.
– For more cover profiles, end caps and
belay sheet see Product range.
126
2016
HWK-0033
No.
PU
Cover profile 50/15
013003
6m
Cover profile 50/25
013005
6m
Reinforcement
for pressure profile 40
013111
6m
Cover profile 50/25
013201
6m
Cover profile 50/20
013210
6m
Pressure profile 47
punched
118005
6m
Cover profile 50/30
141106
6m
THERM+ H-I
Burglar-resistant curtain wall WK3
Timber curtain wall
Pressure profile options visible screwed
Mullion section 50 mm
■ Profiles
– Burglar-resistant curtain wall WK3 (EF1)
acc. to DIN EN 1627 (DIN V 18054).
Article
Pressure profile 50/12
– Glazing class WK3-P6B (old B1).
– T195 = Stainless steel flat (t = 2 mm)
own production.
HWK-0034
No.
PU
013007
6m
Pressure profile 50/9
013008
6m
Pressure profile 50/25
013014
6m
2016
127
THERM+ H-I
Add-ons
■ Technical information
THERM+ H-I
Burglar-resistant curtain wall WK3
Timber curtain wall
Standard exterior gasket
Mullion section/transom section 56 mm
■ Technical information
■ Profiles
– Burglar-resistant curtain wall WK3 (EF1)
acc. to DIN EN 1627 (DIN V 18054).
Article
– Glazing class WK3-P6B (old B1).
– For blocking of the glass unit
see Processing.
– T17 = Depths from 80 mm.
– T19 = Depths from 60 mm.
No.
PU
Cover profile 56/15
013023
6m
Reinforcement
for pressure profile 40
013111
6m
Cover profile 56/20
013410
6m
Pressure profile 53
punched
118010
6m
Base profile 47 punched
145010
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
Gasket for mullion 56
150105
20 m
Gasket for transom 56
150110
20 m
No.
PU
012029
100
pc(s)
012161
100
pc(s)
014036
10 pc(s)
014060
100
pc(s)
016051
10 pc(s)
152015
100
pc(s)
Glass carrier 31 to 32
162050
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
■ Accessories
Article
26 - 64 mm
Special countersunk
sheet metal screw
5.5x24
Flat fillister head screw
5.5x62
Sealing piece
for pressure profile 56
Bullet for screw heads
Crosspoint sealing plate
56
Sealing piece
for transom 56
26 - 64 mm
128
2016
HWK-0041
THERM+ H-I
Burglar-resistant curtain wall WK3
Timber curtain wall
Gasket for transom with flap between mullions
Transom section 56 mm
■ Profiles
– Burglar-resistant curtain wall WK3 (EF1)
acc. to DIN EN 1627 (DIN V 18054).
Article
No.
PU
013023
6m
013111
6m
118010
6m
145010
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
150115
20 m
No.
PU
012029
100
pc(s)
012161
100
pc(s)
014036
10 pc(s)
014060
100
pc(s)
016051
10 pc(s)
152015
100
pc(s)
Glass carrier 31 to 32
162050
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
Cover profile 56/15
– Glazing class WK3-P6B (old B1).
Reinforcement
for pressure profile 40
Pressure profile 53
punched
– For blocking of the glass unit
see Processing.
– T19 = Depths from 60 mm.
Base profile 47 punched
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
Gasket for transom 56
with flap
■ Accessories
Article
Special countersunk
sheet metal screw
5.5x24
Flat fillister head screw
5.5x62
Sealing piece
for pressure profile 56
Bullet for screw heads
Crosspoint sealing plate
56
Sealing piece
for transom 56
26 - 64 mm
HWK-0064
2016
129
THERM+ H-I
Add-ons
■ Technical information
THERM+ H-I
Burglar-resistant curtain wall WK3
Timber curtain wall
Continuous base gasket with flap
Transom section 56 mm
■ Technical information
■ Profiles
– Burglar-resistant curtain wall WK3 (EF1)
acc. to DIN EN 1627 (DIN V 18054).
Article
No.
PU
013023
6m
013111
6m
118010
6m
Base profile 47 punched
145010
6m
Connection profile 36/22
168005
6m
Cover profile 56/15
– Glazing class WK3-P6B (old B1).
Reinforcement
for pressure profile 40
Pressure profile 53
punched
– For blocking of the glass unit
see Processing.
– T19 = Depths from 60 mm.
■ Gaskets
Article
No.
PU
Gasket for pressure prof. 3 011070.LI
100 m
Gasket for pressure prof. 3 011070.RE
100 m
Gasket for pressure prof. 8
011071
100 m
Base gasket for transom
56 with flap
150120
20 m
No.
PU
012029
100 pc(s)
012161
100 pc(s)
014036
10 pc(s)
014060
100 pc(s)
016051
10 pc(s)
152070
10 pc(s)
Glass carrier 31 to 32
162050
10 pc(s)
Special timber screw
4.5x35
908020
100 pc(s)
■ Accessories
Article
Special countersunk
sheet metal screw
5.5x24
Flat fillister head screw
5.5x62
Sealing piece
for pressure profile 56
Bullet for screw heads
Crosspoint sealing plate
56
Sealing piece for base
transom
26 - 64 mm
130
2016
HWK-0042
THERM+ H-I
Burglar-resistant curtain wall WK3
Timber curtain wall
Cover profile options clipable
Mullion section 56 mm
■ Profiles
– Burglar-resistant curtain wall WK3 (EF1)
acc. to DIN EN 1627 (DIN V 18054).
Article
– Glazing class WK3-P6B (old B1).
– Slipping down of the cover profiles
must be prevented.
– For more cover profiles, end caps and
belay sheet see Product range.
No.
PU
Cover profile 56/15
013023
6m
Cover profile 56/25
013025
6m
Reinforcement
for pressure profile 40
013111
6m
Cover profile 56/25
013400
6m
Cover profile 56/20
013410
6m
Pressure profile 53
punched
118010
6m
Cover profile 56/32
141307
6m
013111
HWK-0043
2016
131
THERM+ H-I
Add-ons
■ Technical information
THERM+ H-I
Burglar-resistant curtain wall WK3
Timber curtain wall
Pressure profile options visible screwed
Mullion section 56 mm
■ Technical information
■ Profiles
– Burglar-resistant curtain wall WK3 (EF1)
acc. to DIN EN 1627 (DIN V 18054).
Article
– Glazing class WK3-P6B (old B1).
– T195 = Stainless steel flat (t = 2 mm)
own production.
T195
132
2016
HWK-0044
No.
PU
Pressure profile 56/12
013027
6m
Pressure profile 56/9
013028
6m
THERM+ H-I
Burglar-resistant curtain wall WK3
Timber curtain wall
Standard exterior gasket
Mullion section/transom section 76 mm
■ Profiles
– Burglar-resistant curtain wall WK3 (EF1)
acc. to DIN EN 1627 (DIN V 18054).
Article
– Glazing class WK3-P6B (old B1).
– For blocking of the glass unit
see Processing.
– T17 = Depths from 80 mm.
– T19 = Depths from 60 mm.
– T195 = Stainless steel flat (t = 2 mm)
own production.
No.
PU
Cover profile 76/15
013050
6m
Cover profile 76/20
013610
6m
Pressure profile 73
punched
118015
6m
Base profile 67 punched
145015
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
Gasket for mullion 76
150205
20 m
Gasket for transom 76
150210
20 m
No.
PU
012029
100
pc(s)
012161
100
pc(s)
014037
10 pc(s)
014060
100
pc(s)
016052
10 pc(s)
152020
100
pc(s)
Glass carrier 31 to 32
162050
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
■ Accessories
Article
26 - 64 mm
Special countersunk
sheet metal screw
5.5x24
Flat fillister head screw
5.5x62
Sealing piece
for pressure profile 76
Bullet for screw heads
Crosspoint sealing plate
76
Sealing piece
for transom 76
26 - 64 mm
HWK-0051
2016
133
THERM+ H-I
Add-ons
■ Technical information
THERM+ H-I
Burglar-resistant curtain wall WK3
Timber curtain wall
Gasket for transom with flap between mullions
Transom section 76 mm
■ Technical information
■ Profiles
– Burglar-resistant curtain wall WK3 (EF1)
acc. to DIN EN 1627 (DIN V 18054).
Article
– Glazing class WK3-P6B (old B1).
– For blocking of the glass unit
see Processing.
– T19 = Depths from 60 mm.
– T195 = Stainless steel flat (t = 2 mm)
own production.
No.
PU
Cover profile 76/15
013050
6m
Pressure profile 73
punched
118015
6m
Base profile 67 punched
145015
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
150215
20 m
No.
PU
012129
100 pc(s)
012161
100 pc(s)
014037
10 pc(s)
014060
100 pc(s)
016052
10 pc(s)
152020
100 pc(s)
Glass carrier 31 to 32
162050
10 pc(s)
Special timber screw
4.5x35
908020
100 pc(s)
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
Gasket for transom 76
with flap
■ Accessories
Article
Pan head tapping screw
5.5x58
Flat fillister head screw
5.5x62
Sealing piece
for pressure profile 76
Bullet for screw heads
Crosspoint sealing plate
76
Sealing piece
for transom 76
26 - 64 mm
134
2016
HWK-0065
THERM+ H-I
Burglar-resistant curtain wall WK3
Timber curtain wall
Continuous base gasket with flap
Transom section 76 mm
■ Profiles
– Burglar-resistant curtain wall WK3 (EF1)
acc. to DIN EN 1627 (DIN V 18054).
Article
– Glazing class WK3-P6B (old B1).
No.
PU
Cover profile 76/15
013050
6m
Pressure profile 73
punched
118015
6m
– For blocking of the glass unit
see Processing.
Base profile 67 punched
145015
6m
– T19 = Depths from 60 mm.
Connection profile 36/22
168005
6m
– T195 = Stainless steel flat (t = 2 mm)
own production.
■ Gaskets
Article
No.
Gasket for pressure prof. 3 011070.LI
PU
100 m
Gasket for pressure prof. 3 011070.RE
100 m
Gasket for pressure prof. 8
011071
100 m
Base gasket for transom
76 with flap
150220
20 m
No.
PU
012029
100 pc(s)
012161
100 pc(s)
014037
10 pc(s)
014060
100 pc(s)
016052
10 pc(s)
152070
10 pc(s)
Glass carrier 31 to 32
162050
10 pc(s)
Special timber screw
4.5x35
908020
100 pc(s)
2016
135
■ Accessories
Article
Special countersunk
sheet metal screw 5.5x24
Flat fillister head screw
5.5x62
Sealing piece
for pressure profile 76
Bullet for screw heads
Crosspoint sealing plate
76
Sealing piece for base
transom
HWK-0052
THERM+ H-I
Add-ons
■ Technical information
THERM+ H-I
Burglar-resistant curtain wall WK3
Timber curtain wall
Cover profile options clipable
Mullion section 76 mm
■ Technical information
■ Profiles
– Burglar-resistant curtain wall WK3 (EF1)
acc. to DIN EN 1627 (DIN V 18054).
Article
No.
PU
Cover profile 76/15
013050
6m
Cover profile 76/20
013610
6m
Cover profile 76/25
013615
6m
– For more cover profiles, end caps and
belay sheet see Product range.
Pressure profile 73
punched
118015
6m
– T195 = Stainless steel flat (t = 2 mm)
own production.
Cover profile 76/25
141505
6m
– Glazing class WK3-P6B (old B1).
– Slipping down of the cover profiles
must be prevented.
136
2016
HWK-0053
THERM+ H-I
Burglar-resistant curtain wall WK2
THERM+ H-I
Add-ons
Timber curtain wall 50/56/76 mm
Screw selection
Pressure/cover profiles with exterior gasket 3 mm
– For pressure profile no. 118005,
118010, 118015.
– For pressure profile no. 013007,
013027.
– For pressure profile no. 013014,
013008, 013028.
– Accessories:
Bullet for screw heads no. 014060.
– Accessories:
Bullet for screw heads no. 014060.
– Accessories:
Bullet for screw heads no. 014060.
Infill thickness
mm
12
13 to 14
15 to 16
17 to 19
20 to 22
23 to 24
25 to 26
27 to 29
30 to 32
33 to 34
35 to 36
37 to 39
40 to 42
43 to 44
45 to 46
47 to 49
50 to 52
53 to 54
55 to 56
57 to 59
60 to 62
63 to 64
Infill thickness
mm
12 to 14
15 to 17
18 to 19
20 to 21
22 to 24
25 to 27
28 to 29
30 to 31
32 to 34
35 to 37
38 to 39
40 to 41
42 to 44
45 to 47
48 to 49
50 to 51
52 to 54
55 to 57
58 to 59
60 to 61
62 to 64
Infill thickness
mm
12
13 to 14
15 to 17
18 to 20
21 to 22
23 to 24
25 to 27
28 to 30
31 to 32
33 to 34
35 to 37
38 to 40
41 to 42
43 to 44
45 to 47
48 to 50
51 to 52
53 to 54
55 to 57
58 to 60
61 to 62
63 to 64
No.
012098
012168
012150
012151
012152
012090
012153
012154
012155
012156
012157
012158
012159
012160
012161
012162
012163
012164
012165
012166
012145
012167
Length
mm
28
30
32
35
38
40
42
45
48
50
52
55
58
60
62
65
68
70
72
75
78
80
No.
012011
012012
012139
012013
012014
012140
012015
012141
012016
012142
012017
012143
012018
012020
012146
012147
012148
012260
012149
012261
012262
KH-0060
Length
mm
35
38
40
42
45
48
50
52
55
58
60
62
65
68
70
72
75
78
80
82
85
No.
012138
012010
012111
012112
012139
012013
012014
012140
012015
012141
012016
012142
012017
012143
012018
012020
012146
012147
012148
012260
012149
012261
2016
Length
mm
30
32
35
38
40
42
45
48
50
52
55
58
60
62
65
68
70
72
75
78
80
82
137
THERM+ H-I
Burglar-resistant curtain wall WK2
Timber curtain wall 50/56 mm
Screw selection
Flat pressure profile with exterior gasket 2 mm
– For pressure profile no. 013300,
013310.
– Accessories:
Bullet for screw heads no. 014060.
Infill thickness
mm
22 to 23
24 to 26
27 to 29
30 to 31
32 to 33
34 to 36
37 to 39
40 to 41
42 to 43
44 to 46
47 to 49
50 to 51
52 to 53
54 to 56
57 to 59
60 to 61
62 to 63
64
138
2016
No.
012010
012011
012012
012139
012013
012014
012140
012015
012141
012016
012142
012017
012143
012018
012020
012146
012147
012148
Length
mm
32
35
38
40
42
45
48
50
52
55
58
60
62
65
68
70
72
75
KH-0061
THERM+ H-I
Burglar-resistant curtain wall WK3
THERM+ H-I
Add-ons
Timber curtain wall 50/56/76 mm
Screw selection
Pressure/cover profiles with exterior gasket 3 mm
– For pressure profile no. 118005,
118010, 118015.
– For pressure profile no. 013007,
013027.
– For pressure profile no. 013014,
013008, 013028.
– Accessories:
Bullet for screw heads no. 014060.
– Accessories:
Bullet for screw heads no. 014060.
– Accessories:
Bullet for screw heads no. 014060.
Infill thickness
mm
12 to 13
14 to 16
17 to 19
20 to 21
22 to 23
24 to 26
27 to 29
30 to 31
32 to 33
34 to 36
37 to 39
40 to 41
42 to 43
44 to 46
47 to 49
50 to 51
52 to 53
54 to 56
57 to 59
60 to 63
64
Infill thickness
mm
12 to 13
14 to 15
16 to 17
18 to 20
21 to 23
24 to 25
26 to 27
28 to 30
31 to 33
34 to 35
36 to 37
38 to 40
41 to 43
44 to 45
46 to 47
48 to 50
51 to 53
54 to 55
56 to 57
58 to 60
61 to 64
Infill thickness
mm
12 to 13
14 to 16
17 to 18
19 to 20
21 to 23
24 to 26
27 to 28
29 to 30
31 to 33
34 to 36
37 to 38
39 to 40
41 to 43
44 to 46
47 to 48
49 to 50
51 to 53
54 to 56
57 to 58
59 to 60
61 to 63
64
No.
012153
012154
012155
012156
012157
012158
012159
012160
012161
012162
012163
012164
012165
012166
012145
012167
012275
012276
012277
012279
012280
Length
mm
42
45
48
50
52
55
58
60
62
65
68
70
72
75
78
80
82
85
88
92
95
No.
012140
012015
012141
012016
012142
012017
012143
012018
012020
012146
012147
012148
012260
012149
012261
012262
012265
012266
012267
012268
012270
KH-0058
Length
mm
48
50
52
55
58
60
62
65
68
70
72
75
78
80
82
85
88
90
92
95
100
No.
012014
012140
012015
012141
012016
012142
012017
012143
012018
012020
012146
012147
012148
012260
012149
012261
012262
012265
012266
012267
012268
012270
2016
Length
mm
45
48
50
52
55
58
60
62
65
68
70
72
75
78
80
82
85
88
90
92
95
100
139
140
2016
THERM+ H-I
Fire-resistant curtain wall F30 (EI30)
Only minor additions to the THERM+ base systems are required to
execute THERM+ as a fire resistant curtain wall in various protection
classes. The maximum size of 1,500 x 3,000 mm of the panes
provides a new dimension in fire protection.
The THERM+ basic system can be upgraded to a fire protection curtain
wall in various classes with a few additions and minimum additional
costs and work. Maximum glass formats of 1500 x 3000 mm offer the
greatest possible freedom of design in this case, too.
The construction is approved in Germany, Austria and Switzerland.
All specifications contained in the building authority approval Z-70.4-166
(Germany), the classification report 06042412-Rev-B (Austria), the
VKF fire protection application 25135 (Switzerland) and our technical
specifications must be adhered to.
RAICO must be consulted for country-specific verifications.
Features fire protection
– Additions to the base system:
Aluminium glass carrier,
stainless steel reinforcement for pressure profile.
– System width:
50 or 56 mm.
– Structural profile width: min. 60 mm.
– Mullion depth:
min. 120 mm.
– Transom depth:
min. 100 mm.
– Unlimited width and height of the fire-resistant curtain wall.
– Fire exposure from the inside and outside permissible.
– Assembly of the TC timber connector „KOMBI“ permissible.
– Maximum mullion length 5000 mm.
– Maximum height distance between the glass carriers 5000 mm.
2016
141
THERM+ H-I
Add-ons
Timber curtain wall 50/56 mm
Fire-resistant curtain wall F30 (EI30) – Technology in detail
THERM+ H-I
Fire-resistant curtain wall F30 (EI30)
Timber curtain wall
Fire-resistant curtain wall F30 (EI30)
Mullion section/transom section 50 mm
■ Technical information
■ Profiles
– Maximum glass dimensions:
1500x3000 mm, horizontal and vertical.
Article
No.
PU
– Fire protection according to german general
approval no. Z-70.4-166.
Cover profile 50/15
013003
6m
Cover profile 50/12
013004
6m
Pressure profile 47
punched
118005
6m
Base profile 41 punched
145005
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
Gasket for mullion 50
150005
20 m
Gasket for transom 50
150010
20 m
– Further information see Processing.
– T11 = Depths from 100 mm.
– T27 = Depths from 120 mm.
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
■ Accessories
Article
12 - 52 mm
Flat fillister head screw
5.5x22
Pan head tapping screw
5.5x50
12 - 52 mm
142
2016
H-EI30-0001
No.
012100
012117
PU
100
pc(s)
100
pc(s)
Sheet 40
167050
10 pc(s)
Glass carrier 31 to 32
167351
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
THERM+ H-I
Fire-resistant curtain wall F30 (EI30)
Timber curtain wall
Cover profile options clipped
Mullion section 50 mm
■ Profiles
– Maximum glass dimensions:
1500x3000 mm, horizontal and vertical.
Article
Cover profile 50/15
– Fire protection according to german general
approval no. Z-70.4-166.
PU
6m
Cover profile 50/12
013004
6m
Cover profile 50/25
013005
6m
Cover profile 50/25
013201
6m
Cover profile 50/20
013210
6m
118005
6m
118505
6m
141106
6m
Pressure profile 47
punched
Pressure profile 44
punched
Cover profile 50/30
H-EI30-0003
No.
013003
2016
143
THERM+ H-I
Add-ons
■ Technical information
THERM+ H-I
Fire-resistant curtain wall F30 (EI30)
Timber curtain wall
Fire-resistant curtain wall F30 (EI30)
Mullion section/transom section 56 mm
■ Technical information
■ Profiles
– Maximum glass dimensions:
1500x3000 mm, horizontal and vertical.
Article
No.
PU
– Fire protection according to german general
approval no. Z-70.4-166.
Cover profile 56/15
013023
6m
Cover profile 56/12
013024
6m
Pressure profile 53
punched
118010
6m
Base profile 47 punched
145010
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
Gasket for mullion 56
150105
20 m
Gasket for transom 56
150110
20 m
– Further information see Processing.
– T11 = Depths from 100 mm.
– T27 = Depths from 120 mm.
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
■ Accessories
Article
12 - 52 mm
Flat fillister head screw
5.5x22
Pan head tapping screw
5.5x50
12 - 52 mm
144
2016
H-EI30-0002
No.
012100
012117
PU
100
pc(s)
100
pc(s)
Sheet 40
167050
10 pc(s)
Glass carrier 31 to 32
167351
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
THERM+ H-I
Fire-resistant curtain wall F30 (EI30)
Timber curtain wall
Cover profile options clipped
Mullion section 56 mm
■ Profiles
– Maximum glass dimensions:
1500x3000 mm, horizontal and vertical.
Article
Cover profile 56/15
– Fire protection according to german general
approval no. Z-70.4-166.
PU
6m
Cover profile 56/12
013024
6m
Cover profile 56/25
013025
6m
Cover profile 56/25
013400
6m
Cover profile 56/20
013410
6m
118010
6m
118510
6m
141307
6m
Pressure profile 53
punched
Pressure profile 50
punched
Cover profile 56/32
H-EI30-0004
No.
013023
2016
145
THERM+ H-I
Add-ons
■ Technical information
THERM+ H-I
Fire-resistant curtain wall F30 (EI30)
Timber curtain wall 50/56 mm
Screw selection
Pressure/cover profiles with exterior gasket 3 mm
– For pressure profile no. 118005,
118010.
Infill thickness
mm
12 to 13
14 to 15
16 to 18
19 to 21
22 to 23
24 to 25
26 to 28
29 to 31
32 to 33
34 to 35
36 to 38
39 to 41
42 to 43
44 to 45
46 to 48
49 to 51
52
146
2016
No.
012109
012110
012111
012112
012113
012114
012115
012116
012117
012118
012119
012129
012123
012124
012125
012106
012126
Length
mm
30
32
35
38
40
42
45
48
50
52
55
58
60
62
65
68
70
KH-0056
THERM+ H-I
Fire-resistant curtain wall F30 (EI30)
THERM+ H-I
Add-ons
Timber curtain wall 50/56 mm
Selection glass carriers
– Max. load transmisson with 1 or 2 glass carriers
per support point: see chapter Assembly options.
– Screw connection with
- 3 countersunk sheet metal screws no. 012028
each for no. 167306 to 167341.
- 3 flat fillister head screws no. 012100
each for no. 167346 to 167931.
Infill thickness
mm
12 to 14
15 to 16
17 to 18
19 to 20
21 to 22
23 to 24
25 to 26
27 to 28
29 to 30
31 to 32
33 to 34
35 to 36
37 to 38
39 to 40
41 to 42
43 to 44
45 to 46
47 to 48
49 to 50
51 to 52
No.
Article
PU
167306
167311
167316
167321
167326
167331
167336
167341
167346
167351
167356
167361
167366
167371
167376
167381
167386
167391
167396
167401
Al. glass carrier 10 to 14
Al. glass carrier 15 to 16
Al. glass carrier 17 to 18
Al. glass carrier 19 to 20
Al. glass carrier 21 to 22
Al. glass carrier 23 to 24
Al. glass carrier 25 to 26
Al. glass carrier 27 to 28
Al. glass carrier 29 to 30
Al. glass carrier 31 to 32
Al. glass carrier 33 to 34
Al. glass carrier 35 to 36
Al. glass carrier 37 to 38
Al. glass carrier 39 to 40
Al. glass carrier 41 to 42
Al. glass carrier 43 to 44
Al. glass carrier 45 to 46
Al. glass carrier 47 to 48
Al. glass carrier 49 to 50
Al. glass carrier 51 to 52
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
KH-0019
2016
147
148
2016
THERM+ H-I
Stuctural Glazing SG2
Timber curtain wall 50/56 mm
SG2 curtain wall – Technology in detail
■ Features SG2-system
THERM+ H-I
Add-ons
– Free choise of support construction made of aluminium,
steel or timber.
– System widths 50 and 56 mm.
– Combination possible with THERM+ basic system.
– Support- and basic construction as well as the interior
gasket system are identical to the THERM+ basic system.
– Variable capabilities.
– Slim elevation widths.
– Homogeneous, building enveloping glass area.
– Maximum possible transparency.
– Many application possibilities.
– Approved curtain wall system.
– Infill thicknesses of 32 up to 64 mm.
– Simple and efficient assembly.
SH-0004
2016
149
150
2016
THERM+ H-I
Structural glazing SG2
Timber curtain wall
Structural glazing curtain wall SG2
Mullion section/transom section 50 mm
■ Profiles
– The indications in chapter Technical
execution and installation must be
respected.
Article
No.
PU
U-profile
034052
3m
– Glass bite 13 mm.
Base profile 41 punched
145005
6m
– T1 = Depths from 50 mm.
■ Gaskets
Article
No.
PU
Gasket for mullion 50
150005
20 m
Gasket for transom 50
150010
20 m
Insulating block SG
25/14
168550
50 m
No.
PU
012100
100 pc(s)
012108
100 pc(s)
152010
100 pc(s)
Toggle 20/58 SG
164610
10 pc(s)
Glass carrier 29 to 30
167346
10 pc(s)
Special timber screw
4.5x35
908020
100 pc(s)
2016
151
■ Accessories
Article
Flat fillister head screw
5.5x22
Pan head tapping screw
5.5x28
Sealing piece
for transom 50
HSG-0001
THERM+ H-I
Add-ons
■ Technical information
THERM+ H-I
Structural glazing SG2
Timber curtain wall
Structural glazing curtain wall SG2
Mullion section/transom section 56 mm
■ Technical information
■ Profiles
– The indications in chapter Technical
execution and installation must be
respected.
Article
No.
PU
U-profile
034052
3m
– Glass bite 16 mm.
Base profile 47 punched
145010
6m
– T1 = Depths from 50 mm.
■ Gaskets
Article
No.
PU
Gasket for mullion 56
150105
20 m
Gasket for transom 56
150110
20 m
Insulating block SG
25/14
168550
50 m
No.
PU
■ Accessories
Article
152
2016
HSG-0002
Flat fillister head screw
5.5x22
Pan head tapping screw
5.5x28
Sealing piece
for transom 56
012100
100 pc(s)
012108
100 pc(s)
152015
100 pc(s)
Toggle 20/58 SG
164610
10 pc(s)
Glass carrier 29 to 30
167346
10 pc(s)
Special timber screw
4.5x35
908020
100 pc(s)
THERM+ H-I
Structural glazing SG2
Timber curtain wall 50/56 mm
Wall connection structural glazing SG2 with thermal insulation system
■ Technical information
THERM+ H-I
Add-ons
– Approval required in individual cases.
– T129 = Vapour-tight membrane no. 951019.
HI-0032
2016
153
THERM+ H-I
Structural glazing SG2
Timber curtain wall 50/56 mm
Exterior sealing system
■ Technical information
– T30 = Notching.
– T31 = Width of glass joint 24 mm.
– T142 = Screwing in of the SG toggle
with tool no. 170750.
154
2016
KH-0204
THERM+ H-I
Structural glazing SG2
Timber curtain wall
Exterior sealing system – Cutting and draw off dimensions
System width 50 mm
■ Technical information
T67
THERM+ H-I
Add-ons
– RB = Grid width
RH = Grid height.
– T58 = Length of the gasket for transom
= RB - 28 + 0.5% add-on.
– T66 = Length of the base profile = RB - 56.
– T67 = Glass dimension = RB or RH - 24.
T58
T66
KH-0804
2016
155
THERM+ H-I
Structural glazing SG2
Timber curtain wall
Exterior sealing system – Cutting and draw off dimensions
System width 56 mm
■ Technical information
T67
– RB = Grid width
RH = Grid height.
– T65 = Length of the gasket for transom
= RB - 34 + 0.5%.
– T67 = Glass dimension = RB or RH - 24.
– T91 = Length of the base profile = RB - 62.
T65
T91
156
2016
KH-0805
THERM+ H-I
Structural glazing SG2
THERM+ H-I
Add-ons
Timber curtain wall 50/56 mm
Screw selection
Glazing with silicone joint and glazing shim and SG toggle
– Screw selection tables apply only for a cavity
of 18 mm between the glass panes (glass edge)
and a centric position of the aluminium U profile
no. 034052 in the glass edge.
Interior pane
thickness
mm
6 to 8
No.
Length
mm
012108
28
9 to 10
012109
30
11 to 12
012110
32
13 to 15
012111
35
16 to 18
012112
38
19 to 20
012113
40
21 to 22
012114
42
23 to 25
012115
45
26 to 28
012116
48
29 to 30
012117
50
31 to 32
012118
52
33 to 35
012119
55
36 to 38
012129
58
KH-0071
2016
157
THERM+ H-I
Structural glazing SG2
Timber curtain wall 50/56 mm
Selection insulating block
– The outer pane must be in tempered glass
with min. 8 mm thickness.
– A silicone joint width of 8 to 9 mm results by using
this table, exept for an infill thickness of 25 mm.
In that case the silicone joint width is 10 mm.
– From an infill thickness of 32 mm with aluminium
U profile no. 034052 possible.
Infill thickness
mm
23 to 25
26 to 27
28 to 29
30 to 31
32 to 33
34 to 35
36 to 37
38 to 39
40 to 41
42 to 43
44 to 45
46 to 47
48 to 49
50 to 51
52 to 53
54 to 55
56 to 57
58 to 59
60 to 61
62 to 63
64
158
2016
No.
168541
168544
168546
168548
168550
168552
168554
168556
168558
168560
168562
168564
168566
168568
168570
168572
168564 + 168546
2x 168556
168568 + 168546
2x 168558
168572 + 168546
KH-0205
THERM+ H-I
Structural glazing SG2
THERM+ H-I
Add-ons
Timber curtain wall 50/56 mm
Selection glass carriers
– The outer pane must be in tempered glass
with min. 8 mm thickness.
– Bearing surface of the outer pane on the glass carrier:
min. 50 % of the glass thickness + 1 mm.
– Screw connection with
- 3 countersunk sheet metal screws no. 012028
each for no. 167306 to 167341.
- 3 flat fillister head screws no. 012100
each for no. 167346 to 167931.
Infill thickness
mm
20 to 21
22 to 23
24 to 25
26 to 27
28 to 29
30 to 31
32 to 33
34 to 35
36 to 37
38 to 39
40 to 41
42 to 43
44 to 45
46 to 47
48 to 49
50 to 51
52 to 53
54 to 55
56 to 57
58 to 59
60 to 61
62 to 63
64
No.
Article
PU
167316
167321
167326
167331
167336
167341
167346
167351
167356
167361
167366
167371
167376
167381
167386
167391
167396
167401
167906
167911
167916
167921
167926
Glass carrier 17 to 18
Glass carrier 19 to 20
Glass carrier 21 to 22
Glass carrier 23 to 24
Glass carrier 25 to 26
Glass carrier 27 to 28
Glass carrier 29 to 30
Glass carrier 31 to 32
Glass carrier 33 to 34
Glass carrier 35 to 36
Glass carrier 37 to 38
Glass carrier 39 to 40
Glass carrier 41 to 42
Glass carrier 43 to 44
Glass carrier 45 to 46
Glass carrier 47 to 48
Glass carrier 49 to 50
Glass carrier 51 to 52
Glass carrier 53 to 54
Glass carrier 55 to 56
Glass carrier 57 to 58
Glass carrier 59 to 60
Glass carrier 61 to 62
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
KH-0016
2016
159
THERM+ H-I
Structural glazing SG2
Timber curtain wall 50/56 mm
Glazing with suction discs
■ Technical information
– For additional mechanical saving for all
heights larger than 8 m.
Suction disc set 75
No. 163807
160
2016
Suction disc set 50/90
No. 163810
Suction disc set 56/90
No. 163812
HSG-0003
THERM+ H-I
Structural glazing SG2
Timber curtain wall 50/56 mm
Assembly interior gasket and suction disc
■ Technical information
THERM+ H-I
Add-ons
– T164 = Built-in conditions.
– T170 = Assembly suction disc.
– T171 = Suction disc variants.
– T172 = Suction disc set.
– T201 = Assembly aid no. 015230.
T172 50/90
No. 163810
T172 56/90
No. 163812
T172 75
No. 163807
Z.-Nr. KH-0023
2016
161
THERM+ H-I
Structural glazing SG2
Timber curtain wall 50/56 mm
Technical execution and installation
Indications for the execution of silicone joints
SG-curtain walls with silicone joint
on four sides
SG-curtain walls with silicone joint on two
sides and pressure profile on two sides
■ Technical information
■ Technical information
– In the curtain wall THERM+ SG2 the glass units are fixed
by means of aluminium toggles SG no. 164610.
The quantity of the toggles and the structural values of the
bonding must be determined by an approved specialist,
taking into consideration the maximum distance of
500 mm between two toggles.
– The national building regulations and codes must be
applied. A permit may be required for the particular
project. If an additional mechanical fuxture is required,
RAICO suction discs can be applied (see Product range)
– For assembly and installation the RAICO assembly
instructions must be followed. For the silicone joint the
indications of the manufacturer of the sealant must be
respected in terms of adhesion on the glass edge and
chemical interaction with the glass edge sealant.
Insulated glass units must feature a UV-resistant glass
edge sealant. The necessary glass quality and thickness
must be coordinated with the glass supplier.
– The silicone joint must be at least 8 mm. The exterior
glass pane must be made of tempered glass with heat
soak test with a minimum thickness of 8 mm. The cavity
between the glass panes (glass edge) must be min.
18 mm, the interior glass pane min. 6 mm.
– Glass tolerances:
– The total tolerances of the glass units must be limited to
+/- 2 mm. The panes must be produced on the standing
edge.
162
2016
– In case of silicone joints on two sides of a glass unit, this
must be fixed additionally with suction discs (see Product
range) with at least one screw (diameter 5.5) in
distances of max. 500 mm. The bearing surface of the
suction discs must be min. 1,000 mm2 per glass unit. The
aluminium disc must be underlaid with a weatherproof
silicone disc (60 to 70 shore). As an alternative the glass
unit can be fixed with special toggles in the glass edge,
see system THERM+ SG2.
– The backing for the exerior silicone joint must be executed
with the insulation block SG (height according to the infill
thickness). The silicone joint must be at least 8 mm. The
material must be suitable for weatherproof sealing
between glass units. Possible chemical interactions with
the sealant of the glass edge and, in case of laminated
glass, with the interlayer must be coordinated with the
suppliers. The instructions of the manufacturers of these
materials must be applied.
If exterior silicone joints get in contact with pressure
profiles, a RAICO silicone pressure profile gasket (see
product range), must be used. Penetrations in the silicone
joint must be sealed with the same material. If screws
without washer are used for the suctions discs, the screw
heads must be sealed with the material of the silicone
joints.
– Introduction:
– Seam the exterior glass verge.
Content
Connector technology
TC timber connector SOLO
TC timber connector KOMBI
TC timber connector with expansion mullion
Statics
164
170
176
178
Glazing/Sealing technology
Load transmission
Assembly and installation cross point glass carriers
Interior sealing system
Exterior sealing system
Screw selection
191
195
197
209
220
Accessories
Fixation for sun protection systems
Installation scaffolding anchor
Installation fixture unit
Connection profiles
Suction discs
Belay sheet
Statical values
225
244
245
246
257
258
259
2016
163
THERM+ H-I
Assembly options
Assembly options
THERM+ H-I
Connector technology
Timber curtain wall 50/56/76/96 mm
TC timber connector SOLO
Two-sided connection
■ Technical information
– Technical information and selection tables,
see next page.
– T77 = Base profile length
– T78 = Transom length
– T79 = Machined recess 17.5 pc(s) 30 mm
– T80 = Special nail screw
– T82 = Mullion element
– T84 = Special end grain screw
– T85 = Longitudinal stop
– T86 = Transom element
– T225 = Threaded sleeve no. 160406
– T226 = Screw sleeve no. 160405
– T227 = Cylinder screw
164
2016
KH-0620
THERM+ H-I
Connector technology
Timber curtain wall 50/56/76/96 mm
TC timber connector SOLO
Two-sided connection
■ Technical information
– The transom dimensions should be calculated according to the
DIN EN 13830 product standard to max. 3 mm deflection in the direction
of the glass load.
– The finished connection is suitable only for F1, F23 and F45 loads
(see chapter Dimensioning). The connector should be appropriately
protected against distortion.
THERM+ H-I
Assembly options
– The glass load specifications refer to theoretical maximum glass loads
without taking into consideration wind loads, stanchion loads or additional
loads. In the case of load case combinations, this load is reduced
depending on the size and influence surface. The basis for determining
these glass loads is the characteristic load-bearing capacity of the
connector see ETA-13/0765 taking into account the following factors:
- Gross density timber/timber-based materials б > 350 kg/m³
- Modification coefficient for load effect duration and moisture content
kmod = 0.6
- Partial safety factor laminated timber уM = 1.30
- Partial safety factor for effect уG = 1.35
These factors can vary. The connection must be dimensioned
based on the Eurocodes as well as the ETA-13/0765.
– Connector set consists of:
- Mullion element
- Transom element
- Longitudinal stop
Screws, screw sleeves and threaded sleeves must be ordered separately.
■ SOLO two-sided connection selection and accessories
Transom
depth
mm
Max. glass
weight* in kg
60 to 79
80 to 99
100 to 119
120 to 159
160 to 199
200 to 239
240 to 300
116
138
162
182
218
250
276
TC timber connector
PU: 10 pc(s)
No.
161302
161307
161312
161317
161322
161327
161332
Set
60
80
100
120
160
200
240
Qty.
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
Nail screw
PU: 100 pc(s)
No.
908554
908555
908556
908557
908558
908559
908560
Qty.
4 pc(s)
4 pc(s)
4 pc(s)
4 pc(s)
4 pc(s)
4 pc(s)
4 pc(s)
End grain
Screw sleeve
Threaded
screw
sleeve
no. 908550
no. 160405
no. 160406
PU: 100 pc(s) PU: 100 pc(s) PU: 100 pc(s)
Qty.
Qty.
Qty.
4 pc(s)
2 pc(s)
2 pc(s)
6 pc(s)
3 pc(s)
3 pc(s)
6 pc(s)
3 pc(s)
3 pc(s)
8 pc(s)
3 pc(s)
3 pc(s)
8 pc(s)
3 pc(s)
3 pc(s)
10 pc(s)
4 pc(s)
4 pc(s)
10 pc(s)
4 pc(s)
4 pc(s)
■ Cylinder head screw selection
Cylinder head
Timber
screw
mullion width PU: 100 pc(s)
mm
No.
50 to 58
905552
59 to 68
905562
69 to 78
905572
79 to 88
905582
89 to 98
905592
Screw quantity depends on the transom depth
mm
60 to 79
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
80 to 99
3 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
100 to 119 120 to 159 160 to 199 200 to 239 240 to 300
3 pc(s)
3 pc(s)
3 pc(s)
4 pc(s)
4 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
4 pc(s)
4 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
4 pc(s)
4 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
4 pc(s)
4 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
4 pc(s)
4 pc(s)
2016
165
THERM+ H-I
Connector technology
Timber curtain wall 50/56/76/96 mm
TC timber connector SOLO
One-sided connection variant 1
■ Technical information
– Technical information and selection tables,
see next page.
– T77 = Base profile length
– T78 = Transom length
– T79 = Machined recess 17.5 pc(s) 30 mm
– T80 = Special nail screw
– T82 = Mullion element
– T84 = Special end grain screw
– T85 = Longitudinal stop
– T86 = Transom element
– T226 = Screw sleeve no. 160405
– T228 = Special timber screw no. 908545
166
2016
KH-0621
THERM+ H-I
Connector technology
Timber curtain wall 50/56/76/96 mm
TC timber connector SOLO
One-sided connection variant 1
■ Technical information
– The transom dimensions should be calculated according to the
DIN EN 13830 product standard to max. 3 mm deflection in the direction
of the glass load.
– The finished connection is suitable only for F1, F23 and F45 loads
(see chapter Dimensioning). The connector should be appropriately
protected against distortion.
THERM+ H-I
Assembly options
– The glass load specifications refer to theoretical maximum glass loads
without taking into consideration wind loads, stanchion loads or additional
loads. In the case of load case combinations, this load is reduced
depending on the size and influence surface. The basis for determining
these glass loads is the characteristic load-bearing capacity of the
connector see ETA-13/0765 taking into account the following factors:
- Gross density timber/timber-based materials б > 350 kg/m³
- Modification coefficient for load effect duration and moisture content
kmod = 0.6
- Partial safety factor laminated timber уM = 1.30
- Partial safety factor for effect уG = 1.35
These factors can vary. The connection must be dimensioned
based on the Eurocodes as well as the ETA-13/0765.
– Connector set consists of:
- Mullion element
- Transom element
- Longitudinal stop
Screws, screw sleeves and threaded sleeves must be ordered separately.
■ SOLO one-sided connection variant 1 selection and accessories
Transom
depth
mm
Max. glass
weight
kg
60 to 79
80 to 99
100 to 119
120 to 159
160 to 199
200 to 239
240 to 300
116
138
162
182
218
250
276
TC timber connector
PU: 10 pc(s)
No.
161302
161307
161312
161317
161322
161327
161332
Set
60
80
100
120
160
200
240
Qty.
1 pc(s)
1 pc(s)
1 pc(s)
1 pc(s)
1 pc(s)
1 pc(s)
1 pc(s)
Nail screw
PU: 100 pc(s)
No.
908554
908555
908556
908557
908558
908559
908560
Qty.
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
End grain
Screw sleeve Special timber
screw
screw
no. 908550
no. 160405
no. 908545
PU: 100 pc(s) PU: 100 pc(s) PU: 100 pc(s)
Qty.
Qty.
Qty.
2 pc(s)
2 pc(s)
2 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
4 pc(s)
3 pc(s)
3 pc(s)
4 pc(s)
3 pc(s)
3 pc(s)
5 pc(s)
4 pc(s)
4 pc(s)
5 pc(s)
4 pc(s)
4 pc(s)
2016
167
THERM+ H-I
Connector technology
Timber curtain wall 50/56/76/96 mm
TC timber connector SOLO
One-sided connection variant 2
■ Technical information
– Technical information and selection tables,
see next page.
– T77 = Base profile length
– T78 = Transom length
– T79 = Machined recess 17.5 pc(s) 30 mm
– T80 = Special nail screw
– T82 = Mullion element
– T84 = Special end grain screw
– T85 = Longitudinal stop
– T86 = Transom element
– T226 = Screw sleeve no. 160405
– T227 = Cylinder screw
– T229 = M6 nut (customer provision)
– T230 = Counter plate (self-made)
168
2016
KH-0622
THERM+ H-I
Connector technology
Timber curtain wall 50/56/76/96 mm
TC timber connector SOLO
One-sided connection variant 2
■ Technical information
– The transom dimensions should be calculated according to the
DIN EN 13830 product standard to max. 3 mm deflection in the direction
of the glass load.
– The finished connection is suitable only for F1, F23 and F45 loads
(see chapter Dimensioning). The connector should be appropriately
protected against distortion.
THERM+ H-I
Assembly options
– The glass load specifications refer to theoretical maximum glass loads
without taking into consideration wind loads, stanchion loads or additional
loads. In the case of load case combinations, this load is reduced
depending on the size and influence surface. The basis for determining
these glass loads is the characteristic load-bearing capacity of the
connector see ETA-13/0765 taking into account the following factors:
- Gross density timber/timber-based materials б > 350 kg/m³
- Modification coefficient for load effect duration and moisture content
kmod = 0.6
- Partial safety factor laminated timber уM = 1.30
- Partial safety factor for effect уG = 1.35
These factors can vary. The connection must be dimensioned
based on the Eurocodes as well as the ETA-13/0765.
– Connector set consists of:
- Mullion element
- Transom element
- Longitudinal stop
Screws, screw sleeves and threaded sleeves must be ordered separately.
■ SOLO one-sided connection variant 2, selection and accessories
Transom
depth
mm
Max. glass
weight
kg
60 to 79
80 to 99
100 to 119
120 to 159
160 to 199
200 to 239
240 to 300
116
138
162
182
218
250
276
TC timber connector
PU: 10 pc(s)
No.
161302
161307
161312
161317
161322
161327
161332
Set
60
80
100
120
160
200
240
Qty.
1 pc(s)
1 pc(s)
1 pc(s)
1 pc(s)
1 pc(s)
1 pc(s)
1 pc(s)
Nail screw
PU: 100 pc(s)
No.
908554
908555
908556
908557
908558
908559
908560
Qty.
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
End grain
Screw sleeve
screw
Length of
no. 908550
no. 160405 counter plate
PU: 100 pc(s) PU: 100 pc(s)
mm
Qty.
Qty.
2 pc(s)
2 pc(s)
45
3 pc(s)
3 pc(s)
63
3 pc(s)
3 pc(s)
83
4 pc(s)
3 pc(s)
103
4 pc(s)
3 pc(s)
143
5 pc(s)
4 pc(s)
183
5 pc(s)
4 pc(s)
223
■ Cylinder head screw selection
Cylinder head
Timber
screw
mullion width PU: 100 pc(s)
mm
No.
50 to 58
905572
59 to 68
905582
69 to 78
905592
79 to 88
905602
89 to 98
905612
Screw quantity depends on the transom depth
mm
60 to 79
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
80 to 99
3 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
100 to 119 120 to 159 160 to 199 200 to 239 240 to 300
3 pc(s)
3 pc(s)
3 pc(s)
4 pc(s)
4 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
4 pc(s)
4 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
4 pc(s)
4 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
4 pc(s)
4 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
4 pc(s)
4 pc(s)
2016
169
THERM+ H-I
Connector technology
Timber curtain wall 50/56/76 mm
TC timber connector KOMBI
Two-sided connection
■ Technical information
– Technical information and selection tables,
see next page.
– T78 = Transom length
– T79 = Machined recess 17.5 pc(s) 30 mm
– T80 = Special nail screw
– T82 = Mullion element
– T84 = Special end grain screw
– T85 = Longitudinal stop
– T86 = Transom element
– T87 = "KOMBI" base profile
– T225 = Threaded sleeve no. 160406
– T226 = Screw sleeve no. 160405
– T227 = Cylinder screw
170
2016
KH-0623
THERM+ H-I
Connector technology
Timber curtain wall 50/56/76 mm
TC timber connector KOMBI
Two-sided connection
■ Technical information
– The transom dimensions should be calculated according to the DIN EN 13830
product standard to max. 3 mm deflection in the direction of the glass load.
– The finished connection is suitable only for F1, F23 and F45 loads (see chapter
Dimensioning). The connector should be appropriately protected against distortion.
THERM+ H-I
Assembly options
– The glass load specifications refer to theoretical maximum glass loads without
taking into consideration wind loads, stanchion loads or additional loads. In the case
of load case combinations, this load is reduced depending on the size and influence
surface. The basis for determining these glass loads is the characteristic load-bearing
capacity of the connector see ETA-13/0765 taking into account the following factors:
- Gross density timber/timber-based materials б > 350 kg/m³
- Modification coefficient for load effect duration and moisture content kmod = 0.6
- Partial safety factor laminated timber уM = 1.30
- Partial safety factor for effect уG = 1.35
These factors can vary. The connection must be dimensioned based
on the Eurocodes as well as the ETA-13/0765.
– Connector set consists of:
- Mullion element
- Transom element
- Longitudinal stop
Screws, screw sleeves and threaded sleeves must be ordered separately.
■ KOMBI two-sided connection selection and accessories
Transom
depth
mm
Max. glass
weight
kg
60 to 79
80 to 99
100 to 119
120 to 159
160 to 199
200 to 239
240 to 300
253
274
367
387
423
455
481
TC timber connector
PU: 10 pc(s)
No.
161302
161307
161312
161317
161322
161327
161332
Set
60
80
100
120
160
200
240
Nail screw
PU: 100 pc(s)
Qty.
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
No.
908554
908555
908556
908557
908558
908559
908560
Qty.
4 pc(s)
4 pc(s)
4 pc(s)
4 pc(s)
4 pc(s)
4 pc(s)
4 pc(s)
End grain
Screw sleeve
Threaded
screw
sleeve
no. 908550
no. 160405
no. 160406
PU: 100 pc(s) PU: 100 pc(s) PU: 100 pc(s)
Qty.
Qty.
Qty.
4 pc(s)
2 pc(s)
2 pc(s)
6 pc(s)
3 pc(s)
3 pc(s)
6 pc(s)
3 pc(s)
3 pc(s)
8 pc(s)
3 pc(s)
3 pc(s)
8 pc(s)
3 pc(s)
3 pc(s)
10 pc(s)
4 pc(s)
4 pc(s)
10 pc(s)
4 pc(s)
4 pc(s)
■ Selection of transom base profile
System width
mm
No.
50
56
76
160550
160552
160554
KOMBI
transom base
Qty.
profile
PU: 10 pc(s)
KOMBI 50
2 pc(s)
KOMBI 56
2 pc(s)
KOMBI 76
2 pc(s)
Length
mm
300
300
300
■ Cylinder head screw selection
Cylinder head
Timber
screw
mullion width PU: 100 pc(s)
mm
No.
50 to 58
905552
59 to 68
905562
69 to 78
905572
79 to 88
905582
89 to 98
905592
Screw quantity depends on the transom depth
mm
60 to 79
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
80 to 99
3 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
100 to 119 120 to 159 160 to 199 200 to 239 240 to 300
3 pc(s)
3 pc(s)
3 pc(s)
4 pc(s)
4 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
4 pc(s)
4 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
4 pc(s)
4 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
4 pc(s)
4 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
4 pc(s)
4 pc(s)
2016
171
THERM+ H-I
Connector technology
Timber curtain wall 50/56/76 mm
TC timber connector KOMBI
One-sided connection variant 1
Technical information
– Technical information and selection tables,
see next page.
– T78 = Transom length
– T79 = Machined recess 17.5 pc(s) 30 mm
– T80 = Special nail screw
– T82 = Mullion element
– T84 = Special end grain screw
– T85 = Longitudinal stop
– T86 = Transom element
– T87 = "KOMBI" base profile
– T226 = Screw sleeve no. 160405
– T228 = Special timber screw no. 908545
172
2016
KH-0624
THERM+ H-I
Connector technology
Timber curtain wall 50/56/76 mm
TC timber connector KOMBI
One-sided connection variant 1
■ Technical information
– The transom dimensions should be calculated according to the
DIN EN 13830 product standard to max. 3 mm deflection in the direction
of the glass load.
– The finished connection is suitable only for F1, F23 and F45 loads
(see chapter Dimensioning). The connector should be appropriately
protected against distortion.
THERM+ H-I
Assembly options
– The glass load specifications refer to theoretical maximum glass loads
without taking into consideration wind loads, stanchion loads or additional
loads. In the case of load case combinations, this load is reduced
depending on the size and influence surface. The basis for determining
these glass loads is the characteristic load-bearing capacity of the
connector see ETA-13/0765 taking into account the following factors:
- Gross density timber/timber-based materials б > 350 kg/m³
- Modification coefficient for load effect duration and moisture content
kmod = 0.6
- Partial safety factor laminated timber уM = 1.30
- Partial safety factor for effect уG = 1.35
These factors can vary. The connection must be dimensioned
based on the Eurocodes as well as the ETA-13/0765.
– Connector set consists of:
- Mullion element
- Transom element
- Longitudinal stop
Screws, screw sleeves and threaded sleeves must be
ordered separately.
■ KOMBI one-sided connection variant 1, selection and accessories
Transom
depth
mm
Max. glass
weight
kg
60 to 79
80 to 99
100 to 119
120 to 159
160 to 199
200 to 239
240 to 300
253
274
367
387
426
455
481
TC timber connector
PU: 10 pc(s)
No.
161302
161307
161312
161317
161322
161327
161332
Set
60
80
100
120
160
200
240
Nail screw
PU: 100 pc(s)
Qty.
1 pc(s)
1 pc(s)
1 pc(s)
1 pc(s)
1 pc(s)
1 pc(s)
1 pc(s)
No.
908554
908555
908556
908557
908558
908559
908560
Qty.
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
End grain
Special timber
Screw sleeve
screw
screw
no. 160405
no. 908550
no. 908545
PU: 100 pc(s)
PU: 100 pc(s)
PU: 100 pc(s)
Qty.
Qty.
Qty.
2 pc(s)
2 pc(s)
2 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
4 pc(s)
3 pc(s)
3 pc(s)
4 pc(s)
3 pc(s)
3 pc(s)
5 pc(s)
4 pc(s)
4 pc(s)
5 pc(s)
4 pc(s)
4 pc(s)
■ Selection of transom base profile
System width
mm
No.
50
56
76
160550
160552
160554
KOMBI
transom base
Qty.
profile
PU: 10 pc(s)
KOMBI 50
1 pc(s)
KOMBI 56
1 pc(s)
KOMBI 76
1 pc(s)
Length
mm
300
300
300
2016
173
THERM+ H-I
Connector technology
Timber curtain wall 50/56/76 mm
TC timber connector KOMBI
One-sided connection variant 2
■ Technical information
– Technical information and selection tables,
see next page.
– T78 = Transom length
– T79 = Machined recess 17.5 pc(s) 30 mm
– T80 = Special nail screw
– T82 = Mullion element
– T84 = Special end grain screw
– T85 = Longitudinal stop
– T86 = Transom element
– T87 = "KOMBI" base profile
– T226 = Screw sleeve no. 160405
– T227 = Cylinder screw
– T229 = M6 nut (customer provision)
– T230 = Counter plate (self-made)
174
2016
KH-0625
THERM+ H-I
Connector technology
Timber curtain wall 50/56/76 mm
TC timber connector KOMBI
One-sided connection variant 2
■ Technical information
– The transom dimensions should be calculated according to the DIN EN 13830
product standard to max. 3 mm deflection in the direction of the glass load.
– The finished connection is suitable only for F1, F23 and F45 loads (see chapter
Dimensioning). The connector should be appropriately protected against distortion.
THERM+ H-I
Assembly options
– The glass load specifications refer to theoretical maximum glass loads without
taking into consideration wind loads, stanchion loads or additional loads. In the case
of load case combinations, this load is reduced depending on the size and influence
surface. The basis for determining these glass loads is the characteristic load-bearing
capacity of the connector see ETA-13/0765 taking into account the following factors:
- Gross density timber/timber-based materials б > 350 kg/m³
- Modification coefficient for load effect duration and moisture content kmod = 0.6
- Partial safety factor laminated timber уM = 1.30
- Partial safety factor for effect уG = 1.35
These factors can vary. The connection must be dimensioned based
on the Eurocodes as well as the ETA-13/0765.
– Connector set consists of:
- Mullion element
- Transom element
- Longitudinal stop
Screws, screw sleeves and threaded sleeves must be ordered separately.
■ KOMBI one-sided connection variant 2, selection and accessories
Transom
depth
mm
Max. glass
weight
kg
60 to 79
80 to 99
100 to 119
120 to 159
160 to 199
200 to 239
240 to 300
253
274
367
387
423
455
481
TC timber connector
PU: 10 pc(s)
No.
161302
161307
161312
161317
161322
161327
161332
Set
60
80
100
120
160
200
240
Nail screw
PU: 100 pc(s)
Qty.
1 pc(s)
1 pc(s)
1 pc(s)
1 pc(s)
1 pc(s)
1 pc(s)
1 pc(s)
No.
908554
908555
908556
908557
908558
908559
908560
Qty.
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
End grain
Screw sleeve
screw
Length of
no. 160405
no. 908550
PU: 100 pc(s) counter plate
PU: 100 pc(s)
mm
Qty.
Qty.
2 pc(s)
2 pc(s)
45
3 pc(s)
3 pc(s)
63
3 pc(s)
3 pc(s)
83
4 pc(s)
3 pc(s)
103
4 pc(s)
3 pc(s)
143
5 pc(s)
4 pc(s)
183
5 pc(s)
4 pc(s)
223
■ Selection of transom base profile
System width
mm
No.
50
56
76
160550
160552
160554
KOMBI
transom base
Qty.
profile
PU: 10 pc(s)
KOMBI 50
1 pc(s)
KOMBI 56
1 pc(s)
KOMBI 76
1 pc(s)
Length
mm
300
300
300
■ Cylinder head screw selection
Cylinder head
Timber
screw
mullion width PU: 100 pc(s)
mm
No.
50 to 58
905572
59 to 68
905582
69 to 78
905592
79 to 88
905602
89 to 98
905612
Screw quantity depends on the transom depth
mm
60 to 79
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
80 to 99
3 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
100 to 119 120 to 159 160 to 199 200 to 239 240 to 300
3 pc(s)
3 pc(s)
3 pc(s)
4 pc(s)
4 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
4 pc(s)
4 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
4 pc(s)
4 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
4 pc(s)
4 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
4 pc(s)
4 pc(s)
2016
175
THERM+ H-I
Connector technology
Timber curtain wall 50/56 mm
TC timber connector with expansion mullion
Expansion mullion connection
■ Technical information
– Technical information and selection tables,
see next page.
– T77 = Base profile length
– T78 = Transom length
– T79 = Machined recess 17.5 pc(s) 30 mm
– T80 = Special nail screw
– T82 = Mullion element
– T84 = Special end grain screw
– T85 = Longitudinal stop
– T86 = Transom element
– T231 = Threaded sleeve no. 160407
– T232 = Sealing tape no. 951990
– T233 = Screw no. 907550
– T234 = Screw no. 908225
176
2016
KH-0629
THERM+ H-I
Connector technology
Timber curtain wall 50/56 mm
TC timber connector with expansion mullion
Expansion mullion connection
■ Technical information
– The transom dimensions should be calculated according to the DIN
EN 13830 product standard to max. 3 mm deflection in the direction of
the glass load.
– The finished connection is suitable only for F1, F23 and F45 loads
(see chapter Dimensioning). The connector should be appropriately
protected against distortion.
THERM+ H-I
Assembly options
– The glass load specifications refer to theoretical maximum glass loads
without taking into consideration wind loads, stanchion loads or additional
loads. In the case of load case combinations, this load is reduced
depending on the size and influence surface. The basis for determining
these glass loads is the characteristic load-bearing capacity of the
connector see ETA-13/0765 taking into account the following factors:
- Gross density timber/timber-based materials б > 350 kg/m³
- Modification coefficient for load effect duration and moisture content
kmod = 0.6
- Partial safety factor laminated timber уM = 1.30
- Partial safety factor for effect уG = 1.35
These factors can vary. The connection must be dimensioned
based on the Eurocodes as well as the ETA-13/0765.
– Connector set consists of:
- Mullion element
- Transom element
- Longitudinal stop
Screws, screw sleeves and threaded sleeves must be ordered separately.
■ Expansion mullion connection selection and accessories
Transom
depth
mm
Max. glass
weight
kg
60 to 79
80 to 99
100 to 119
120 to 159
160 to 199
200 to 239
240 to 300
*
*
*
*
*
*
*
TC timber connector
PU: 10 pc(s)
No.
161302
161307
161312
161317
161322
161327
161332
Set
60
80
100
120
160
200
240
Qty.
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
Nail screw
PU: 100 pc(s)
No.
908554
908555
908556
908557
908558
908559
908560
Qty.
4 pc(s)
4 pc(s)
4 pc(s)
4 pc(s)
4 pc(s)
4 pc(s)
4 pc(s)
End grain
Flat head
Screw sleeve
screw
screw
no. 160407
no. 908550
no. 908225
PU: 100 pc(s)
PU: 100 pc(s)
PU: 100 pc(s)
Qty.
Qty.
Qty.
4 pc(s)
4 pc(s)
4 pc(s)
6 pc(s)
6 pc(s)
6 pc(s)
6 pc(s)
6 pc(s)
6 pc(s)
8 pc(s)
6 pc(s)
6 pc(s)
8 pc(s)
6 pc(s)
6 pc(s)
10 pc(s)
8 pc(s)
8 pc(s)
10 pc(s)
8 pc(s)
8 pc(s)
* Note: Design values for the extending mullion connection are available on request.
2016
177
THERM+ H-I
Connector technology
Timber curtain wall 50/56/76/96 mm
TC timber connector
Static dimensioning
■ Scope
The use of the TC timber connector is regulated in ETA-13/0765 which sets out the basis for the static dimensioning and processing
of the connector. The key elements of ETA-13/0765 are listed below.
■ Types of timber
The following types of timber and timber-based materials are covered by the ETA:
– Solid softwood according to EN 14081
– Solid hardwood according to EN 14081
– Glued laminated timber made of softwood according to EN 14081
– Glued laminated timber made of hardwood according to EN 14081
oak, beech or meranti
(alternatives with building authority approval)
– Laminated veneer lumber (LVL) as EN 14374
– Intrallam and Porallam with building authority approval
– Plywood according to EN 636
The calculation is based on a gross density of 350 kg/m³. Materials with a higher gross density of up to 500 kg/m³ can be used.
Gross densities over 500 kg/m³ are calculated with a value of 500 kg/m³.
Minimum softwood requirements are grades S 10 / C 24.
The conversion factors can be found in the ETA and/or the following example for static dimensioning.
178
2016
THERM+ H-I
Connector technology
Timber curtain wall 50/56/76/96 mm
TC timber connector
Static dimensioning
■ Service classes
The RAICO TC timber connector can only be used in buildings in the service classes 1 + 2 according to Eurocode 5.
These categories are differentiated as follows:
Table NA.6 – equilibrium moisture content of timber structural materials
Extract from DIN-EN 1995-1-1/NA:2010-12
1
2
3
(5 to 15) %a
(10 to 20) %b
(12 to 24) %
c
a
In most softwoods in service class 1 the average equilibrium moisture content does not exceed 12 %.
b
In most softwoods in service class 2 the average equilibrium moisture content does not exceed 20 %.
c
Service class 3 also includes structures in which higher equilibrium moisture contents are permitted.
THERM+ H-I
Assembly options
Service class
Equilibrium
moisture content
Table 1-15 Service classes (NKL) according to DIN 1052: 2008-12, 7.1.1.1)
Extract from DIN 1052
Service class
1
2
3
Moisture content in
timber construction materials, corresponds to
an ambient climate of
T = 20° C
φ = 65 % 2)
T = 20° C
φ = 85 % 2)
Climatic conditions which
lead to greater timber
moistures than service
class 2
Timber moisture w in
timber construction
materials after a period
of acclimatisation
Examples of ambient
climate
Up to around 12 % 3)
all-round enclosed and
heated structures
Up to around 20 % 3)
roofed, open structures
around > 20 %
Outdoor structures
exposed to the weather
1)
Equilibrium moisture content of timber construction materials, see Tables 1 – 18.
2)
Relative humidities which are exceeded for only a few weeks per year.
3)
In most softwoods in this service class, the specified timber moistures as average equilibrium moistures
are not exceeded.
2016
179
THERM+ H-I
Connector technology
Timber curtain wall 50/56/76/96 mm
TC timber connector
Static dimensioning
■ Dimensioning concept according to EUROCODE
Mullion and transom façades are dimensioned according to
– EUROCODE 0 – Basis of structural design
– EUROCODE 1 – Effect on structures
– EUROCODE 5 – Design, calculation and dimensioning of timber buildings
– EN 13830 – Product standard for curtain wall façades
(This standard regulates the deflection limits for mullion and transom components of façades)
Dimensioning is carried out according to the semi-probabilistic safety concept which substitutes admissible values with characteristic
values and specifies different partial safety factors as fixed values. The mullion and transom components are dimensioned in accordance
with the EUROCODES in this concept.
The TC timber connectors from RAICO Bautechnik, have
– reduced edge distances
– end-grain screw fasteners
– custom components
and so fall into the standard category of "non-regulated components". Regulation is according to ETA-13/0765 dated 25.06.2013.
This ETA rules the usability and load-bearing capacity of the T-connector in the following loading directions:
■ Description of the loads / direction of the load
F45 = inherent weight load caused by a filling element such as glass or metal panel. With average force transmission the tested clamping
thickness is max. 65 mm. In the case of asymmetric force transmission this clamping thickness should be reduced.
Please get in contact with us to discuss
F1 = centric tensile load on the transom. This can result from
– wind load in the region of corner glazing
– replacement of mullions and continuous transoms.
In this case the corresponding proportion of the glass load of the adjacent fields is considered.
F2, F3 = right-angled load on mullion- and transom axis. Loads in this direction can be e.g.
– Wind suction loads
– Wind pressure loads
– Balustrade loads
ETA-13/0765 breaks down the directions of loads as follows:
F2 = load in the wind pressure direction
F3 = load in the wind suction direction
180
2016
THERM+ H-I
Connector technology
Timber curtain wall 50/56/76/96 mm
TC timber connector
Static dimensioning
Please note:
The basis for structural dimensioning is always the
European Technical Approval.
– ETA-13/0765
– EUROCODES 0, 1, 5 as well as national appendices
– Product standard EN 13830 for curtain wall façades
– Requirements from the structure
THERM+ H-I
Assembly options
– the national appendices the Eurocodes and/or
national regulations must be observed.
The T-connections of façades may only be exposed to loads and deformations listed in the ETA and in the above documents.
Avoid distortions in the façades or prevent with suitable measures.
Construction specifications e.g. final distances in the region of the connection points are not regulated in this permission.
The specifications of EUROCODE 5 – Dimensioning and construction of timber buildings (DIN EN 1995) apply.
2016
181
THERM+ H-I
Connector technology
Timber curtain wall 50/56/76/96 mm
TC timber connector
Static dimensioning
■ Dimensioning connections of the T-connector
When dimensioning according to the semi-probabilistic safety concept, there is a differentiation between effects/loads and the
stress-bearing capacity.
Effects are loads such as
– Snow loads
– Wind loads
– Stanchion loads
on the T-connections.
The level and type of these loads are regulated in EUROCODE 1 – Effects (EN 1991).
The partial safety factors γF of the loads must be considered. These are,
– for independent constant loads e.g. inherent weight loads (glass loads), γG = 1.35
– independent variable loads e.g. wind load and stanchion load, γQ = 1.50
See the following extract from the standard. The most unfavourable values shall be used in all cases.
Table NA.A.1.2(B) – partial safety coefficients for effects: (STR/GEO) (Group B)
Extract from DIN EN 19990:2010-12
Effect
Symbol
Situations
P/T
A/E
γG, sup
1.35
1.00
γG, inf
1.00
1.00
Independent variable loads:
Unfavourable case b, c
γQ
1.50
1.00
Extraordinary loads:
γA
–
1.00
Independent constant loads:
Unfavourable case a, b
Favourable case
a, b
a
The limit state for the failure of the load-bearing structure is verified by multiplying all the characteristic values of an independent
constant load (i.e. the characteristic values of all constant loads from the same origin) by the factor γG, sup if the total resulting effect
on the observed stress is unfavourable, or by the factor γG, inf if the total resulting effect is favourable.
b
To choose the partial safety coefficients for the verification of geotechnical limit values, see DIN 1054-101:2009-02, Tables A 2-1,
A 2-2 and A 2-3
c
In the case of a favourable effect γQ = 0
d
The values γG and γQ may only be divided in individual cases and only with the consent of the responsible building authorities into
factors γg and γq for the uncertainties of the representative values of the loads and into a factor γEd for the model uncertainty of the
loads and stresses.
182
2016
THERM+ H-I
Connector technology
Timber curtain wall 50/56/76/96 mm
TC timber connector
Static dimensioning
The probability that all simultaneously occurring effects are at their maximum in one stress direction is extremely slim.
In this case, so-called combination rules are applied, in which a variable load is taken into account with its maximum value and all other
variable loads are reduced by so-called combination factors.
The relevant load case combination is the one with the higher value which is used in mullion and transom façades, e.g. in the case of
wind load (wind pressure, wind suction) and stanchion load.
The combination factors can be taken from EUROCODE 0. An extract is given below:
Effect
Ψ0
Ψ1
Ψ2
– Category A: Living rooms and staff rooms
0.7
0.5
0.3
– Category B: Offices
0.7
0.5
0.3
– Category C: Conference rooms
0.7
0.7
0.6
– Category D: Sales rooms
0.7
0.7
0.6
1
0.9
0.8
– Category F: Thoroughfares, vehicle load ≤ 30 kN
0.7
0.7
0.6
– Category G: Thoroughfares, 30 kN ≤ vehicle load ≤ 160 kN
0.7
0.5
0.3
0
0
0
THERM+ H-I
Assembly options
Table NA.A.1.1 – Numerical values for combination coefficients in civil engineering
Extract from DIN EN 1990:NA2010-12 – Germany
Payloads in civil engineering (categories see EN 1991-1-1) a
– Category E: Storage rooms
– Category H: Roofs
Snow and ice loads, see DIN EN 1991-1-3
– Locations up to sea level + 1000 m
0.5
0.2
0
Locations above sea level + 1000 m
0.7
0.5
0.2
Wind loads, see DIN EN 1991-1-4
0.6
0.2
0
Temperature effects (not fire), see DIN EN 1991-1-5
0.5
0.5
0
Construction site settlement, see DIN EN 1997
Other effects: b, c
1
1
1
0.8
0.7
0.5
a
Reduction coefficients for payloads in multi-storey buildings see DIN EN 1991-1-1.
b
Fluid pressure is generally treated as a variable load for which the Ψ-coefficients are defined site-specifically. Fluid pressure whose
value is limited by geometrical constraints may be treated as a constant load wherein all Ψ-coefficients should be set to 1.0.
c
Ψ coefficients for machine loads should be defined with respect to the operation.
2016
183
THERM+ H-I
Connector technology
Timber curtain wall 50/56/76/96 mm
TC timber connector
Static dimensioning
■ The stress-bearing capacity/resistance of the T-connection
The stress-bearing capacity/resistance of the T-connection is regulated in ETA-13/0765.
The characteristic strength of the connection at a gross density (gross density of mullions and transoms must be lower) of ρL = 350 kg/m³
can be taken from the following table.
Table C.1 – Effective quantity nj, nef, 1, nef, 45 and characteristic values F1, RK, F2, RK, F3, RK, F45, RK
for a characteristic gross density of 350 kg/m³
RAICO T-connector
nef, 1
F1, RK [kN]
nJ
F2, RK [kN]
Wind
pressure
F3, RK [kN]
Wind
suction
nef, 45
F45, RK [kN]
F45, in, RK [kN]
SOLO 60
1.60
3.1
2
3.4
3.4
0.42
1.7
1.0
SOLO 80
2.41
4.7
3
5.1
5.1
0.60
2.0
1.0
SOLO 100
2.97
5.8
3
5.1
5.1
0.82
2.4
1.0
SOLO 120
2.63
5.2
4
6.8
5.8
0.99
2.7
1.0
SOLO 160
2.36
4.6
4
6.8
5.8
1.30
3.2
1.0
SOLO 200
3.85
7.5
5
7.0
5.8
1.57
3.7
1.0
SOLO 240
3.30
6.5
5
7.0
5.8
1.80
4.0
1.0
KOMBI 60
1.60
3.1
2
3.4
3.4
0.42
3.7
3.0
KOMBI 80
2.41
4.7
3
5.1
5.1
0.60
4.0
3.0
KOMBI 100
2.97
5.8
3
5.1
5.1
0.82
5.4
4.0
KOMBI 120
2.63
5.2
4
6.8
5.8
0.99
5.7
4.0
KOMBI 160
2.36
4.6
4
6.8
5.8
1.30
6.2
4.0
KOMBI 200
3.85
7.5
5
7.0
5.8
1.57
6.7
4.0
KOMBI 240
3.30
6.5
5
7.0
5.8
1.80
7.0
4.0
At higher gross densities the characteristic strengths are calculated according to the following equations.
The forces F1, F2 and F3 always act in the centre of the connector. The force F45 has an eccentricity which corresponds to a maximum
infill thickness of 65 mm (based on a symmetrical glass construction; the infill thickness should be reduced for asymmetrical glass
constructions). The maximum gross density may not exceed 500 kg/m³. The minimum gross density may not be less than 350 kg/m³.
F45, RK – characteristic value for inherent weight stress
F45, RK = 1693 x nef45 x (ρK/350)0.5 + F45,in,RK [N]
F1, RK – characteristics value for tensile stress on the transom
F1, RK = nef1 x 1958 x (ρK/350)0.8 [N]
F2, RK – characteristic value in the wind pressure direction
F2, RK = min.
s
nj x 1693 x (ρK/350)0.5 [N]
7000 N
F3, RK – the characteristic value in the wind suction direction
F3, RK = min.
nef, 1
s
nj x 1693 x (ρK/350)0.5 [N]
5800 N
= effective no. of screws for stress direction F1
nef, 45
= effective no. of screws for stress direction F45
nj
= no. of screws in the transom
PK
= gross density in the mullion/transom in kg/m³. The lower value should be used for the dimensioning.
F45,in,RK = additional load-bearing capacity in the loading direction
These characteristic values apply only for connectors in pairs for load directions F1, F2, F3 and F45
The specified values apply per connection.
184
2016
THERM+ H-I
Connector technology
Timber curtain wall 50/56/76/96 mm
TC timber connector
Static dimensioning
The following should be considered when determining the stress-bearing capacity/resistance of the connection:
– Partial safety value for individual materials in timber constructions γM = 1.30 (Germany – national requirements must be taken into account)
Building material
γM
Solid wood, chipboards, hard fibreboards, medium hard fibreboards, MDF fibreboards, soft fibreboards, laminated veneer
lumber, plywood, OSB, laminated timber
1.3
THERM+ H-I
Assembly options
Table NA.2 – Partial safety coefficients γM for strength- and stiffness properties in constant and temporary dimensioning situations
Extract from DIN EN 1995-1-1/NA:2010-12 – Germany
Steel in connections
– for bending-stressed dowel-type fasteners
1.3
– for tension or shear-stressed parts in verification of resistance to yield stress in the net cross section
1.3
– Board proof of load-bearing capacity for nail boards
1.25
Modification coefficient kmod according to EUROCODE 5
Load effect duration
class
Order of magnitude of the accumulated
duration of the characteristic load effect
medium
1 week to 6 months
short
shorter than a week
very short
shorter than a minute
Note: Examples for assignment to duration of load effect classes can be found in Table 2.2. Climate-related load effects (snow, wind) vary
in magnitude in different countries so the national appendix is used for assignment to load effect duration classes.
2016
185
THERM+ H-I
Connector technology
Timber curtain wall 50/56/76/96 mm
TC timber connector
Static dimensioning
Table NA.1 – Breakdown of loads according to DIN 1055-1, DIN 1055-3, DIN 1055-4, DIN 1055-5, DIN 1055-9, DIN 1055-10 and DIN
1055-100 in load effect duration classes (KLED)
Extract from DIN EN 1995-1-1-2010-12 – Germany
Effect
KLED
Specific weights and surface loads according to DIN
1055-1
constant
Perpendicular payloads DIN 1055-3
A Top ground, living- and staff rooms
medium
B Office surfaces, working surfaces, corridors
medium
C Rooms, conference rooms and surfaces which may be used
for gatherings (with exception of categories defined under A, short
B, D and E)
D Sales rooms
medium
E Factories and workshops, sheds, storage surfaces and
accesses, surfaces with considerable footfall
long
F Roads and parking surfaces for lightweight vehicles (total
load ≤ kN), access ramps to these surfaces
medium
short
G Surfaces for operation with counterweight stackers
medium
H Non weight-bearing roofs, except for typical maintenance
or repair
short
K Helicopter normal loads
short
T Staircases and stair landings
short
Z Accesses, balconies and similar
short
Horizontal payloads according to DIN 1055-3
Horizontal payloads from persons on balustrades, landings
and the constructions used as barriers
Horizontal payloads for achieving adequate longitudinal and
transverse rigidity
Horizontal loads for helicopter landing pads on flat roofs
– for horizontal payloads
– for rollover protection
Wind loads according to DIN 1055-4
short
a
short
very short
short/very
short b
Snow load and ice load according to DIN 1055-5
Height of construction site above sea level < 1000 m
short
Height of construction site above sea level > 1000 m
medium
Impact loads according to DIN 1055-9
very short
Horizontal loads from crane and machine operation
according to DIN 1055-10
short
a
Corresponding to the associated loads.
wind, kmod the average of short and very short can be used.
b For
186
2016
THERM+ H-I
Connector technology
Timber curtain wall 50/56/76/96 mm
TC timber connector
Static dimensioning
Table NA.4 – Calculated values for modification coefficients kmod for timber, timber- and plaster materials
Extract from DIN EN 1995-1-1/NA:2010-12 – Germany
Load effect duration class
Standard
Laminated beams,
cross-laminated timber,
solid timber boards
Gypsum boards (types
GKB, GKF, GKBI and
GKFI), gypsum fibre
boards
Cement bonded
chipboards
DIN 18180,
DIN EN
15283-2
Service class
long effect
medium
effect
short effect
very short
effect
1
0.60
0.70
0.80
0.90
1.10
2
0.60
0.70
0.80
0.90
1.10
1
0.20
0.40
0.60
0.80
1.10
2
0.15
0.30
0.45
0.60
0.80
1
0.30
0.45
0.65
0.85
1.10
2
0.20
0.30
0.45
0.60
0.80
THERM+ H-I
Assembly options
Building material
constant
effect
Please note that the table is taken from the national appendix (D) of the Eurocode. If used in other countries the correspondingly
applicable values must be used.
Example:
Glass loads = inherent weight load = constant effect, kmod = 0.6
Wind loads = average value of short and very short effect kmod = 1.0
Impact loads = very short effect, kmod = 1.10
To dimension the connector, the effects are compared with the load-bearing capacity of the connector.
In this case the following applies:
FED / FRD ≤ 1 wherein
FED = design value of force resulting from the stress
FRD = design value of the load-bearing capacity of the fastener resulting from the admissible values, taking into account coefficients.
In the event of load case combinations these are superimposed according to the calculation formula (B1.5), see ETA-13/0765 as follows:
(F1,ED / F1,RD)² + (F23,ED / F23,RD)² + (F45,ED / F45,RD)² ≤ 1
2016
187
THERM+ H-I
Connector technology
Timber curtain wall 50/56/76/96 mm
TC timber connector
Static dimensioning
■ Example of calculation on the basis of the façade element shown
Field width = 2.3 m
Field height upper = 2.6 m
Field height lower = 0.9 m
Total glass thickness = 16 mm
Stanchion load = 1.0 kN/m (cat B)
Wind load suction + pressure = 0.5 KN/m²
The inherent weight of the transom is not taken into account in this calculation.
Gross density of laminated timber = 350 kg/m³
Use: Hotel
AW type 1: Triangular load
Field height > field width
Effects
Inherent weight load = glass load on the transom
Field
height
Feldhöhe
oben
above
Field
width
Feldbreite
AW type 2: Trapezoidal load
Field height < field width
F45,ED = 2.12 KN x 1.35 = 2.86 KN
Load surfaces for wind load/stanchion load:
The wind suction load case is relevant in this case because it acts
in the same direction as the stanchion load.
In the case of type 1: Aw =
Field width x field width
4
In the case of type 2: Aw =
Field width x field height lower Field height lower x field height lower
–
2
4
=
=
2.3 m x 2.3 m
= 1.32 m2
4
2.3 m x 0.9 m
0.9 m x 0.9 m
–
= 0.83 m2
2
4
Total stress surface = 1.32 m² + 0.83 m² = 2.15 m²
Calculating of wind load on the transom:
Total wind load = 2.15 m² x 0.5 kN/m² = 1.08 KN
Partial safety factor of the effect γQ = 1.50
FW,ED = 1.08 x 1.50 = 1.62 KN
Stanchion load FH = transom length x stanchion load
= 2.3 m x 1.0 KN/m = 2.3 KN
FH,ED = 2.30 x 1.50 = 3.45 KN
Superimposition of the wind load and stanchion load:
ψO = 0.6 for wind loads / 0.8 for other loads (Germany)
LFK1: F3,ED = FW,ED + FH,ED x 0.8
= 1.62 + 3.45 x 0.8 = 4.38 KN
LFK2: F3,ED = FH,ED + FW,ED x 0.6
= 3.45 + 1.62 x 0.6 = 4.42 KN
Load case combination 2 is relevant.
188
2016
unten
below
Partial safety factor of the effect
ϒG = 1.35 for independent constant loads
Field
height
Feldhöhe
Glass weight = 2.3 x 2.6 x 16 x 2.5 ≈ 212 kg = 2.12 KN
THERM+ H-I
Connector technology
Timber curtain wall 50/56/76/96 mm
TC timber connector
Static dimensioning
Resistance of the connector:
SOLO 143 connector is used.
On the basis of the gross density, the values from Table C1 – ETA-13/0765 can be used.
These are:
THERM+ H-I
Assembly options
F1,RK = 4.6 KN
F3,RK (wind suction) = 5.8 KN
F45,RK = 3.2 KN
Please note that these values apply per connection and in the following calculation for a transom they are
multiplied by a factor of 2.
Resistance of the T-connectors in direction F45 – glass load
Kmod for BSH service class 2 = 0.6
Safety factor γM for BSH = 1.30
F45,RD+ = F45,RK x (2 x 0.6 / 1.30) = 2.95 KN
Resistance of the T-connection in direction F3 – wind suction
Kmod for BSH service class 1 + 2 = 1.0 for wind loads
= 1.10 for stanchion loads
Because of the different Kmod the lower value of 1.0 is used for the calculation.
Safety factor γM for BSH = 1.30
F3,RD =
F3,RK x 2 x 1.0
= 8.92 KN
1.3
The load F1 is not taken into account.
Proof for F45
F45,ED
F45,RD
=
2,86
2.86
2,95
2.95
= 0,97
4,42
4.42
8,92
8.92
= 0,5
Proof for F3
F3,ED
F3,RD
=
Proof for combined load:
(F1,ED / F1,RD)² + (F3,ED / F3,RD)² + (F45,ED / F45,RD)² < 1
(0 / 0)² + 0.5² + 0.97² = 0 + 0.24 + 0.94 = 1.19
2016
189
THERM+ H-I
Connector technology
Timber curtain wall 50/56/76/96 mm
TC timber connector
Static dimensioning
■ Result
The connector cannot sustain the loads imposed.
A lower connector or a KOMBI type connector must be used.
In the case of the KOMBI 143, while maintaining the values, the following load-bearing capacities are
obtained on the basis of the following values:
F1,RK = 4.6 KN
F3,RK (wind suction) = 5.8 KN
F45,RK = 6.2 KN
F45,RD =
6.2 x 2 x 0.6
1.3
F3,RD =
5.8 x 2 x 1.0
= 8.92 KN
1.3
= 5.72 KN
Verification for combined loads with the KOMBI type connector:
(F1,ED / F1,RD)² + (F3,ED / F3,RD)² + (F45,ED / F45,RD)² =
(0 / 0)² + (4.42 / 8.92)² + (2.86 / 5.72)² =
0 + 0.5² + 0.52 = 0.5
This verification is satisfied; the load-bearing capacity of the connector is adequate.
The following table provides orientation for the design width of the SOLO and KOMBI T-connectors taking
into account the following factors:
Gross density timber = 350 kg/m³
Kmod = 0.6 for load type F45
Kmod = 1.0 for load type F2.3
Kmod = 0.6 for load type F1
Partial safety factor of material γM= 1.30
Partial safety factor of constant load γG = 1.35
Partial safety factor of variable load γQ = 1.50
Design value for maximum glass load in direction F45 per transom
(load case combinations shall be superimposed)
SOLO
116 kg
138 kg
162 kg
182 kg
218 kg
250 kg
276 kg
TC60
TC80
TC100
TC120
TC160
TC200
TC240
KOMBI
253 kg
274 kg
367 kg
388 kg
423 kg
455 kg
481 kg
Design value for maximum wind pressure-/suction load in direction F2,3 per transom
(load case combinations shall be superimposed)
TC SOLO/KOMBI 60
TC SOLO/KOMBI 80
TC SOLO/KOMBI 100
TC SOLO/KOMBI 120
TC SOLO/KOMBI 160
TC SOLO/KOMBI 200
TC SOLO/KOMBI 240
190
2016
F2 – wind pressure
F3 – wind suction
3.47 KN
5.21 KN
5.21 KN
6.95 KN
6.95 KN
7.18 KN
7.18 KN
3.47 KN
5.21 KN
5.21 KN
5.95 KN
5.95 KN
5.95 KN
5.95 KN
THERM+ H-I
Glazing/Sealing technology
Timber curtain wall 50/56/76/96 mm
Glass load transmission up to 200 kg
– For glass loads up to 200 kg the load transmission needs one glass carrier per side.
- Synthetic glass carrier:
Infill thicknesses from 10 up to 64 mm:
Fixation with 3 countersunk screws
no. 012029 each.
- Aluminium glass carrier:
Infill thickness up to 28 mm fixed by
3 countersunk screws no. 012028 each.
Infill thickness from 29 mm fixed by
3 flat fillister head screws no. 012100 each.
– Two special timber screws no. 908020
additionally on top of the glass carrier.
– Max. load per glass carrier: 100 kg.
Selection of the glass carriers
Infill
Synthetic
thickness glass carrier
mm
no.
10 to 14
162005
15 to 16
17 to 18
19 to 20
21 to 22
23 to 24
25 to 26
27 to 28
29 to 30
31 to 32
33 to 34
35 to 36
37 to 38
39 to 40
41 to 42
43 to 44
45 to 46
47 to 48
49 to 50
51 to 52
53 to 54
55 to 56
57 to 58
59 to 60
61 to 62
63 to 64
KH-0500
162010
162015
162020
162025
162030
162035
162040
162045
162050
162055
162060
162065
162070
162075
162080
162085
162090
162095
162100
162105
162110
162115
162120
162125
162130
Aluminium
glass carrier
no.
167306
167311
167316
167321
167326
167331
167336
167341
167346
167351
167356
167361
167366
167371
167376
167381
167386
167391
167396
167401
167906
167911
167916
167921
167926
167931
Article
PU
Glass carrier 10 to 14 10 pc(s)
Glass carrier 15 to 16
Glass carrier 17 to 18
Glass carrier 19 to 20
Glass carrier 21 to 22
Glass carrier 23 to 24
Glass carrier 25 to 26
Glass carrier 27 to 28
Glass carrier 29 to 30
Glass carrier 31 to 32
Glass carrier 33 to 34
Glass carrier 35 to 36
Glass carrier 37 to 38
Glass carrier 39 to 40
Glass carrier 41 to 42
Glass carrier 43 to 44
Glass carrier 45 to 46
Glass carrier 47 to 48
Glass carrier 49 to 50
Glass carrier 51 to 52
Glass carrier 53 to 54
Glass carrier 55 to 56
Glass carrier 57 to 58
Glass carrier 59 to 60
Glass carrier 61 to 62
Glass carrier 63 to 64
2016
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
191
THERM+ H-I
Assembly options
■ Technical information
THERM+ H-I
Glazing/Sealing technology
Timber curtain wall 50/56/76/96 mm
Glass load transmission up to 300 kg
■ Technical information
– For glass loads up to 300 kg the load transmission needs one glass carrier per side.
- Synthetic glass carrier:
Infill thicknesses from 10 up to 64 mm:
Fixation with 3 countersunk screws
no. 012029 each.
- Aluminium glass carrier:
Infill thickness up to 28 mm fixed by
3 countersunk screws no. 012028 each.
Infill thickness from 29 mm fixed by
3 flat fillister head screws no. 012100 each.
– Three special timber screws no. 908020
additionally on top of the glass carrier.
– Max. load per glass carrier: 150 kg.
192
2016
Selection of the glass carriers
Infill
Synthetic
thickness glass carrier
mm
no.
10 to 14
162005
15 to 16
17 to 18
19 to 20
21 to 22
23 to 24
25 to 26
27 to 28
29 to 30
31 to 32
33 to 34
35 to 36
37 to 38
39 to 40
41 to 42
43 to 44
45 to 46
47 to 48
49 to 50
51 to 52
53 to 54
55 to 56
57 to 58
59 to 60
61 to 62
63 to 64
KH-0502
162010
162015
162020
162025
162030
162035
162040
162045
162050
162055
162060
162065
162070
162075
162080
162085
162090
162095
162100
162105
162110
162115
162120
162125
162130
Aluminium
glass carrier
no.
167306
167311
167316
167321
167326
167331
167336
167341
167346
167351
167356
167361
167366
167371
167376
167381
167386
167391
167396
167401
167906
167911
167916
167921
167926
167931
Article
PU
Glass carrier 10 to 14 10 pc(s)
Glass carrier 15 to 16
Glass carrier 17 to 18
Glass carrier 19 to 20
Glass carrier 21 to 22
Glass carrier 23 to 24
Glass carrier 25 to 26
Glass carrier 27 to 28
Glass carrier 29 to 30
Glass carrier 31 to 32
Glass carrier 33 to 34
Glass carrier 35 to 36
Glass carrier 37 to 38
Glass carrier 39 to 40
Glass carrier 41 to 42
Glass carrier 43 to 44
Glass carrier 45 to 46
Glass carrier 47 to 48
Glass carrier 49 to 50
Glass carrier 51 to 52
Glass carrier 53 to 54
Glass carrier 55 to 56
Glass carrier 57 to 58
Glass carrier 59 to 60
Glass carrier 61 to 62
Glass carrier 63 to 64
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
THERM+ H-I
Glazing/Sealing technology
Timber curtain wall 50/56/76/96 mm
Glass load transmission up to 450 kg
– For glass loads up to 450 kg the load transmission needs two glass carrier per side.
- Synthetic glass carrier:
Infill thicknesses from 10 up to 64 mm:
Fixation with 3 countersunk screws
no. 012029 each.
- Aluminium glass carrier:
Infill thickness up to 28 mm fixed by
3 countersunk screws no. 012028 each.
Infill thickness from 29 mm fixed by
3 flat fillister head screws no. 012100 each.
– Eight special timber screws no. 908020
additionally on top and at the bottom of the
glass carrier.
– Max. load per glass carrier: 225 kg.
Selection of the glass carriers
Infill
Synthetic
thickness glass carrier
mm
no.
10 to 14
162005
15 to 16
17 to 18
19 to 20
21 to 22
23 to 24
25 to 26
27 to 28
29 to 30
31 to 32
33 to 34
35 to 36
37 to 38
39 to 40
41 to 42
43 to 44
45 to 46
47 to 48
49 to 50
51 to 52
53 to 54
55 to 56
57 to 58
59 to 60
61 to 62
63 to 64
KH-0501
162010
162015
162020
162025
162030
162035
162040
162045
162050
162055
162060
162065
162070
162075
162080
162085
162090
162095
162100
162105
162110
162115
162120
162125
162130
Aluminium
glass carrier
no.
167306
167311
167316
167321
167326
167331
167336
167341
167346
167351
167356
167361
167366
167371
167376
167381
167386
167391
167396
167401
167906
167911
167916
167921
167926
167931
Article
PU
Glass carrier 10 to 14 10 pc(s)
Glass carrier 15 to 16
Glass carrier 17 to 18
Glass carrier 19 to 20
Glass carrier 21 to 22
Glass carrier 23 to 24
Glass carrier 25 to 26
Glass carrier 27 to 28
Glass carrier 29 to 30
Glass carrier 31 to 32
Glass carrier 33 to 34
Glass carrier 35 to 36
Glass carrier 37 to 38
Glass carrier 39 to 40
Glass carrier 41 to 42
Glass carrier 43 to 44
Glass carrier 45 to 46
Glass carrier 47 to 48
Glass carrier 49 to 50
Glass carrier 51 to 52
Glass carrier 53 to 54
Glass carrier 55 to 56
Glass carrier 57 to 58
Glass carrier 59 to 60
Glass carrier 61 to 62
Glass carrier 63 to 64
2016
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
193
THERM+ H-I
Assembly options
■ Technical information
THERM+ H-I
Glazing/Sealing technology
Timber curtain wall 50/56/76/96 mm
Glass load transmission up to 200 kg
Interior gaskets 26 mm
■ Technical information
– For glass loads up to 200 kg the load transmission needs one glass carrier each side.
- Aluminium glass carrier:
Fixation with 3 special flat fillister head
screws no. 908308 each.
– Two special timber screws no. 908020
additionally on top of the glass carrier.
– 2 additional screws for the base profile
in the area of the glass carrier.
– Max. load per glass carrier: 100 kg.
194
2016
Selection of the glass carriers
Infill
Aluminium
thickness glass carrier
mm
no.
4 to 5
167555
6 to 7
167556
8 to 9
167557
10 to 11
167558
12 to 13
167559
14 to 15
167560
16 to 17
167561
18 to 19
167562
20
167563
KH-0563
Article
Nominal
size
PU
Glass carrier 8/13
Glass carrier 10/13
Glass carrier 12/13
Glass carrier 14/13
Glass carrier 16/13
Glass carrier 18/13
Glass carrier 20/13
Glass carrier 22/13
Glass carrier 24/13
8
10
12
14
16
18
20
22
24
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
THERM+ H-I
Glazing/Sealing technology
Timber curtain wall 50/56/76 mm
Assembly cross point glass carrier
■ Technical information
– Admissable glass loads:
Infill thicknesses 35 mm to 52 mm: 450 kg to 600 kg
Infill thicknesses 53 mm to 64 mm: 450 kg to 500 kg.
T145
– Max. load per support point = max. glass load : 2.
– Do not use the cross point glass carrier with
specific flat pressure profiles.
THERM+ H-I
Assembly options
– Please contact your glass vendor for clarifying the reduced
distance of the setting block to axis of the mullion (50 mm).
– The load transmission across the cross point glass carrier
must be taken by the structural construction.
– The base profile must be screwed down additionally
(see Processing).
– T144 = Glass shim.
– T145 = Cross point glass carriers set
(selection see table).
– T149 = External view.
KH-0015
2016
195
THERM+ H-I
Glazing/Sealing technology
Timber curtain wall 50/56/76 mm
Assembly and installation cross point glass carriers
■ Technical information
Selection of the cross point glass carriers
– T82 = Mullion element.
Infill
thickness
mm
35 to 36
37 to 38
39 to 40
41 to 42
43 to 44
45 to 46
47 to 48
49 to 50
51 to 52
53 to 54
55 to 56
57 to 58
59 to 60
61 to 62
63 to 64
– T86 = Transom element.
35 to
- 64 mm
T82
T86
No.
Article
PU
163750
163752
163754
163756
163758
163760
163762
163764
163766
163768
163770
163772
163774
163776
163778
Cross point glass carrier set 35 to 36
Cross point glass carrier set 37 to 38
Cross point glass carrier set 39 to 40
Cross point glass carrier set 41 to 42
Cross point glass carrier set 43 to 44
Cross point glass carrier set 45 to 46
Cross point glass carrier set 47 to 48
Cross point glass carrier set 49 to 50
Cross point glass carrier set 51 to 52
Cross point glass carrier set 53 to 54
Cross point glass carrier set 55 to 56
Cross point glass carrier set 57 to 58
Cross point glass carrier set 59 to 60
Cross point glass carrier set 61 to 62
Cross point glass carrier set 63 to 64
1 pc(s)
1 pc(s)
1 pc(s)
1 pc(s)
1 pc(s)
1 pc(s)
1 pc(s)
1 pc(s)
1 pc(s)
1 pc(s)
1 pc(s)
1 pc(s)
1 pc(s)
1 pc(s)
1 pc(s)
Content per set: 2 cross point glass carriers each (1 set per transom).
Selection of screws
Alternative: individual order (number of screws per cross point glass carrier)
Screw set
no.
or
163790
Connection
mullion with transom
piece
Screw connection
in mullion
Screw connection in transom
Double-sided
Unilateral
No.
No.
No.
No.
2x 012101
3x 012153
6x 012101
3x 012101
Content per set: screws for 2 cross point glass carriers (1 set per transom needed).
Assembly cross point glass carrier set
Assembly cross point glass carrier set
– Assembly double-sided (e. g. in cross point).
– Unilateral assembly (e. g. im the edge region).
The transom piece has to be shortened accordingly.
– Screws have to be ordered separately (see table).
– Screws have to be ordered separately (see table).
196
2016
KH-0015
THERM+ H-I
Glazing/Sealing technology
Timber curtain wall 50/56/76/96 mm
Interior sealing system
Curtain wall, standard
■ Technical information
The timber construction must be flush on the glazing side.
Max. misalignment between mullion and transom = ± 0.5 mm.
– Applicable gaskets
THERM+ H-I
Assembly options
- Gasket for mullion with notching by special tool
(see Processing)
No. 150005
Gasket for mullion 50
No. 150105
Gasket for mullion 56
No. 150205
Gasket for mullion 76
No. 150705
Gasket for mullion 96
No. 150040 to 150050 Gasket for mullion 50 polygon
No. 150140 to 150150 Gasket for mullion 56 polygon
– - Gasket for transom with notching by special tool
(see Processing)
No. 150010
Gasket for transom 50
No. 150110
Gasket for transom 56
No. 150210
Gasket for transom 76
No. 150710
Gasket for transom 96
Sealing piece for transom gasket
No. 152010
Transom sealing piece 50
No. 152015
Transom sealing piece 56
No. 152020
Transom sealing piece 76
- PU = 100 pc(s)
- Assembly without sealing material.
Transom sealing piece 96 P
No. 152086
Transom sealing piece 96 P
- PU = 100 pc(s)
- Assembly with sealing material D2, no. 952015 or
with Special Silicon B1, no. 952020.
KH-0001
2016
197
THERM+ H-I
Glazing/Sealing technology
Timber curtain wall 50/56 mm
Interior sealing system
Curtain wall, expansion mullion for assembling elements
■ Technical information
The timber construction must be flush on the glazing side.
Max. misalignment between mullion and transom = ± 0.5 mm.
– Pre-Assembly of complete and ready-for-glazing elements
with specific base profiles and half gaskets as well as parts
of accessories:
– Applicable gaskets
- Gasket for mullion with notching by special tool
(see Processing)
No. 150305
Gasket for mullion 50 H
No. 150335
Gasket for mullion 56 H
No. 168201
Insertion profile 18/14 I
- Gasket for transom with notching by special tool
(see Processing)
No. 150010
Gasket for transom 50
No. 150110
Gasket for transom 56
Sealing piece for transom gasket
No. 152010
Transom sealing piece 50
No. 152015
Transom sealing piece 56
- PU = 100 pc(s)
- Assembly without sealing material.
198
2016
KH-0001.2
THERM+ H-I
Glazing/Sealing technology
Timber curtain wall 50/56/76 mm
Interior sealing system
Curtain wall, gasket for transom with flap
■ Technical information
The timber construction must be flush on the glazing side.
Max. misalignment between mullion and transom = ± 0.5 mm.
– Applicable gaskets
THERM+ H-I
Assembly options
- Gasket for mullion with notching by special tool
(see Processing)
No. 150005
Gasket for mullion 50
No. 150105
Gasket for mullion 56
No. 150205
Gasket for mullion 76
No. 150040 to 150050 Gasket for mullion 50 polygon
No. 150140 to 150150 Gasket for mullion 56 polygon
- Gasket for transom with notching by special tool
(see Processing)
No. 150015
Gasket for transom 50, flap
No. 150115
Gasket for transom 56, flap
No. 150215
Gasket for transom 76, flap
Sealing piece for transom gasket
No. 152010
Transom sealing piece 50
No. 152015
Transom sealing piece 56
No. 152020
Transom sealing piece 76
- PU = 100 pc(s)
- Assembly without sealing material.
– T196 = Belay sheet no. 167007.
– T198 = Screw no. 908118.
KH-0002
2016
199
THERM+ H-I
Glazing/Sealing technology
Timber curtain wall 50/56/76 mm
Interior sealing system
Curtain wall, base gasket with flap
■ Technical information
The timber construction must be flush on the glazing side.
Max. misalignment between mullion and transom = ± 0.5 mm.
– Applicable gaskets
- Base gasket with notching by special tool
(see Processing)
No. 150020
Base gasket 50, flap
No. 150120
Base gasket 56, flap
No. 150220
Base gasket 76, flap
Sealing piece for transom gasket
No. 152070
Transom sealing piece,
applicable for all system widths.
- PU = 10 pc(s)
- Assembly with sealing material D2, no. 952015.
– T196 = Sealing piece no. 167007.
– T198 = Screw no. 908118.
– T199 = Sealing piece.
200
2016
KH-0003
THERM+ H-I
Glazing/Sealing technology
Timber curtain wall 50/56/76 mm
Interior sealing system
Curtain wall, base gasket with flap, version center mullion
■ Technical information
The timber construction must be flush on the glazing side.
Max. misalignment between mullion and transom = ± 0.5 mm.
– Applicable gaskets (PU = 20 m)
THERM+ H-I
Assembly options
- Base gasket with notching by special tool
(see Processing)
No. 150020
Base gasket 50, flap
No. 150120
Base gasket 56, flap
No. 150220
Base gasket 76, flap
- PU = 10 pcs.
- Assembly with sealing material D2, no. 952015.
KH-0004
2016
201
THERM+ H-I
Glazing/Sealing technology
Timber curtain wall 50/56/76 mm
Interior sealing system
3 drainage levels
■ Technical information
Interior gaskets for drainage level 1
– T38 = Level 2.
Article
Gasket for transom 50
Gasket for transom 56
Gasket for transom 76
– T39 = Level 3.
– T40 = Level 1.
– T151 = Interior gasket E3.
No.
150010
150110
150210
PU
20 m
20 m
20 m
– T152 = Interior gasket E2.
– T153 = Interior gasket E1.
– T159 = Interior gasket E2
with flap.
Interior gaskets for drainage level 2
Article
Interior gasket 50 E2
Interior gasket 50 E2, flap
Interior gasket 56 E2
Interior gasket 56 E2, flap
Interior gasket 76 E2
No.
150013
150018
150113
150118
150213
PU
20 m
20 m
20 m
20 m
20 m
Interior gaskets for drainage level 3
Article
Interior gasket 50 E3
Interior gasket 56 E3
Interior gasket 76 E3
No.
150008
150108
150208
PU
20 m
20 m
20 m
Transom sealing pieces for drainage level 1
Article
Transom sealing piece 50
Transom sealing piece 56
Transom sealing piece 76
No.
152010
152015
152020
PU
100 pc(s)
100 pc(s)
100 pc(s)
Transom sealing pieces for drainage level 2
Article
Transom sealing piece 50 E2
Transom sealing piece 56 E2
Transom sealing piece 76 E2
202
2016
K-0011
No.
152009
152014
152019
PU
100 pc(s)
100 pc(s)
100 pc(s)
THERM+ H-I
Glazing/Sealing technology
Timber curtain wall 50/56/76 mm
Interior sealing system
Curtain wall, drainage level 1 to level 2
■ Technical information
The timber construction must be flush on the glazing side.
Max. misalignment between mullion and transom = ± 0.5 mm.
– Applicable gaskets
THERM+ H-I
Assembly options
- Gasket for transom with notching by special tool
(see Processing)
No. 150010 Gasket for transom 50
No. 150110
Gasket for transom 56
No. 150210 Gasket for transom 76
– - Gasket for transom with notching by special tool
(see Processing)
No. 150013
Interior gasket 50 E2
No. 150113
Interior gasket 56 E2
No. 150213
Interior gasket 76 E2
Sealing piece for transom gasket
No. 152010 Transom sealing piece 50
No. 152015
Transom sealing piece 56
No. 152020 Transom sealing piece 76
- PU = 100 pc(s)
- Assembly without sealing material.
– T38 = Level 2.
– T40 = Level 1.
KH-0012
2016
203
THERM+ H-I
Glazing/Sealing technology
Timber curtain wall 50/56/76 mm
Interior sealing system
Curtain wall, drainage level 2 to level 3
■ Technical information
The timber construction must be flush on the glazing side.
Max. misalignment between mullion and transom = ± 0.5 mm.
– Applicable gaskets
- Gasket for transom with notching by special tool
(see Processing)
No. 150010 Interior gasket 50
No. 150110
Interior gasket 56
No. 150210 Interior gasket 76
– - Gasket for transom with notching by special tool
(see Processing)
No. 150013
Interior gasket 50 E2
No. 150113
Interior gasket 56 E2
No. 150213
Interior gasket 76 E2
Sealing piece for transom gasket
No. 152009 Transom sealing piece 50 E2
No. 152014
Transom sealing piece 56 E2
No. 152019
Transom sealing piece 76 E2
- PU = 100 pc(s)
- Assembly without sealing material.
– T38 = Level 2.
– T39 = Level 3.
– T188 = Transom sealing piece.
204
2016
KH-0001.1
THERM+ H-I
Glazing/Sealing technology
Timber curtain wall 50/56 mm
Interior sealing system
Curtain wall, drainage level 2 to level 3 with flaps
■ Technical information
– Applicable gaskets
– - Gasket for mullion with notching by special tool
(see Processing)
No. 150008 Interior gasket 50 E3
No. 150108
Interior gasket 56 E3
THERM+ H-I
Assembly options
- Gasket for transom with notching by special tool
(see Processing)
No. 150018 Interior gasket 50 E2 flap
No. 150118
Interior gasket 56 E2 flap
Sealing piece for transom gasket
No. 152009 Transom sealing piece 50 E2
No. 152014
Transom sealing piece 56 E2
- PU = 100 pc(s)
- Assembly without sealing material.
– T38 = Level 2.
– T39 = Level 3.
– T197 = Sealing piece no. 167008.
– T198 = Screw no. 908118.
KH-0009
2016
205
THERM+ H-I
Glazing/Sealing technology
Timber curtain wall 50 mm
Interior sealing system
Curtain wall, interior gasket with a height of 26 mm
■ Technical information
The timber construction must be flush on the glazing side.
Max. misalignment between mullion and transom = ± 0.5 mm.
– Applicable gaskets
- Gasket for transom with notching by special tool
(see Processing).
No. 150461 Transom gasket 50/26
No. 150462 Interior gasket 50/26 E3
No. 150463 Interior gasket 50/26 E2
Sealing piece for transom gasket
No. 152007
Transom sealing piece 50/26 E1
No. 152011
Transom sealing piece 50/26 E2
- PU = 100 pc(s)
- Assembly without sealing material.
– T188 = Transom sealing piece.
206
2016
KH-0017
THERM+ H-I
Glazing/Sealing technology
Timber curtain wall 50/56/76 mm
Interior sealing system
Gasket joint with stainless steel sealing piece
A
■ Technical information
– The joint areas must be sealed carefully with sealing material.
The stainless steel sealing pieces must be fixed with two screws
no. 908118 each.
– For more information see Processing.
– T199 = Sealing piece.
A
Straight extension
Stainless steel sealing piece
System
width for mullion for transom for level E3
mm
no.
no.
no.
50
B
B
T199
C
C
PU
167105
167131
167103
10 pc(s)
56
167115
–
–
10 pc(s)
76
167125
–
–
10 pc(s)
Exterior angle 90° to 180°
Stainless steel sealing piece
System
width
mm
for mullion
no.
for level E3
no.
PU
50
167106
167098
10 pc(s)
56
167116
167112
10 pc(s)
76
167126
–
10 pc(s)
Interior angle 180° to 270°
Stainless steel sealing piece
System
width
mm
for mullion
no.
for level E3
no.
PU
50
167107
167099
10 pc(s)
56
167117
–
10 pc(s)
76
167127
–
10 pc(s)
T199
D
D
Exterior angle 0° to 90°
System
width
mm
Stainless steel sealing piece
50
167130
10 pc(s)
56
167132
10 pc(s)
76
167134
10 pc(s)
for transom no.
PU
T199
KH-0006, KH-0007, KH-0008; KH-0018
2016
207
THERM+ H-I
Assembly options
T199
THERM+ H-I
Glazing/Sealing technology
Timber curtain wall 50/56 mm
Interior sealing system
Pressure compensation via mullion rebate
■ Technical information
Measure x for the shortening of the sealing piece
– The synthetic sealing piece supports the
ventilation as well as the condensate drainage.
– The flaps of the gasket for mullions must be
notched in the area of the sealing pieces.
– Shorten the sealing piece according to the
infill thickness (see table) and fix it with a pan
head tapping screw no. 012103.
– Assembly with sealing material D2, no. 952015.
118005
118010
2016
013007
013027
013008
013028
013014
24
28
–
28
30
26
30
26
28
27 to 28
24
28
24
26
29 to 30
22
26
22
24
31 to 32
20
24
20
22
33 to 34
18
22
18
20
35 to 36
16
20
16
18
37 to 38
14
18
14
16
39 to 40
12
16
12
14
41 to 42
10
14
10
12
43 to 44
8
12
8
10
45 to 46
6
10
6
8
47 to 48
4
8
4
6
49 to 50
2
6
2
4
51 to 52
0
4
0
2
50/56
208
013018
013038
25 to 26
to
measure x
– For more information see Processing.
Pressure profile no.
Infill
thickness
mm
K-0005
THERM+ H-I
Glazing/Sealing technology
Timber curtain wall 50/56/76/96 mm
Exterior sealing system
Pressure profiles and snap-in cover profiles
■ Technical information
Stainless steel cross point sealing plates
self-adhesive, assembly at the glass edge
No.
– T163 = Sealing piece for pressure profile.
Application area
PU
016050
Pressure profiles 50 mm
10 pc(s)
016051
Pressure profiles 56 mm
10 pc(s)
016052
Pressure profiles 76 mm
10 pc(s)
167480
Pressure profiles 96 mm
10 pc(s)
EPDM sealing pieces for pressure profiles
self-adhesive, assembly at the interior side
of the pressure profile
No.
KH-0200
Application area
PU
014035
Pressure profiles 50 mm
10 pc(s)
014036
Pressure profiles 56 mm
10 pc(s)
014037
Pressure profiles 76 mm
10 pc(s)
152425
Pressure profiles 96 mm
10 pc(s)
2016
209
THERM+ H-I
Assembly options
– T162 = Cross point sealing plate.
THERM+ H-I
Glazing/Sealing technology
Timber curtain wall 50/56/76/96 mm
Exterior sealing system
Pressure profiles with visible screw connection
■ Technical information
Stainless steel cross point sealing plates
self-adhesive, assembly at the glass edge
– T162 = Cross point sealing plate.
No.
– T163 = Sealing piece for pressure profile.
Application area
PU
016050
Pressure profiles 50 mm
10 pc(s)
016051
Pressure profiles 56 mm
10 pc(s)
016052
Pressure profiles 76 mm
10 pc(s)
167480
Pressure profiles 96 mm
10 pc(s)
EPDM sealing pieces for pressure profiles
self-adhesive, assembly at the interior side
of the pressure profile
No.
210
2016
KH-0202
Application area
PU
014035
Pressure profiles 50 mm
10 pc(s)
014036
Pressure profiles 56 mm
10 pc(s)
014037
Pressure profiles 76 mm
10 pc(s)
152425
Pressure profiles 96 mm
10 pc(s)
THERM+ H-I
Glazing/Sealing technology
Timber curtain wall 50/56/76 mm
Exterior sealing system
Flat pressure profiles
■ Technical information
Stainless steel cross point sealing plates
self-adhesive, assembly at the glass edge
No.
– T41 = Notch.
016053
– T162 = Cross point sealing plate.
– T163 = Sealing piece for pressure profile.
016054
016055
Application area
PU
Flat pressure profile 50
no. 013300
Flat pressure profile 56
no. 013310
Flat pressure profile 76
no. 013313
10 pc(s)
10 pc(s)
10 pc(s)
EPDM sealing pieces for pressure profiles
self-adhesive, assembly at the interior side
of the pressure profile
No.
014038
014039
014041
Application area
PU
Flat pressure profile 50
no. 013300
Flat pressure profile 56
no. 013310
Flat pressure profile 76
no. 013313
10 pc(s)
10 pc(s)
10 pc(s)
T41
KH-0201
2016
211
THERM+ H-I
Assembly options
Notch the end of the flat pressure profiles
for transom (see Processing).
THERM+ H-I
Glazing/Sealing technology
Timber curtain wall 50/56/76 mm
Exterior sealing system
Assembly of insulating blocks
■ Technical information
– All insulating blocks must be notched with a
special tool at the end of the transom gasket
(A) for assembling the sealing piece for
pressure profile (see Processing).
– The version with insulating blocks 21 and P
must be notched (B) additionally with a special
tool in the area of the glass support (see
Processing).
– PU of the insulating blocks: 50 m.
– T50 = Notching A.
– T51 = Notching B.
– T162 = Cross point sealing plate.
– T163 = Sealing piece for pressure profile.
212
2016
KH-0203
THERM+ H-I
Glazing/Sealing technology
Timber curtain wall 50/56/76 mm
Exterior sealing system
Cover profile joint curtain wall
A
B
■ Technical information
Selection of interior joint plate and profile joint sealing plate
– Do not joint the pressure profile at the cross point.
Sealing piece
for pressure
profile
no.
Interior
joint plate
no.
Profile joint
sealing plate
no.
013003 (50x15)
014035
167230
016070
013210 (50x20)
014035
167232
016070
141106 (50x30)
014035
167236
016070
– T176 = Pressure profile gasket.
013023 (56x15)
014036
167250
016071
– T177 = Interior joint plate.
013410 (56x20)
014036
167252
016071
– T178 = Profile joint sealing plate.
141307 (56x32)
014036
167257
016071
013610 (76x20)
014037
167272
016072
013050 (76x15)
014037
167270
016072
013615 (76x25)
014037
167274
016072
013620 (76x30)
014037
167276
016072
– T160 = Joint at intermediate range.
– T161 = Joint at the cross point.
– T163 = Sealing piece for pressure profile.
– T174 = Pressure profile.
– T175 = Cover profile.
K-0016
2016
THERM+ H-I
Assembly options
Cover profile
no.
– Length exterior gasket = length pressure profile + 0.5 %.
213
THERM+ H-I
Glazing/Sealing technology
Timber curtain wall 50/56/76 mm
Exterior sealing system
Pressure profile joint curtain wall
■ Technical information
Selection of profile joint sealing plate
– Do not joint the pressure profile at the cross point.
– Length exterior gasket = length pressure profile + 0.5 %.
– T41 = Notch.
– T163 = Sealing piece for pressure profile.
– T174 = Pressure profile.
– T176 = Pressure profiles gasket.
– T178 = Profile joint sealing plate.
214
2016
K-0017, K-0018
Pressure
profile
no.
Profile joint
sealing plate
no.
Sealing piece
for pressure
profile
no.
013300 (50x3)
014038
016073
013310 (56x3)
014039
016074
013313 (76x3)
014041
016075
013008 (50x9)
014035
016070
013007 (50x12)
014035
016070
013028 (56x9)
014036
016071
013027 (56x12)
014036
016071
THERM+ H-I
Glazing/Sealing technology
Timber curtain wall 50/56/76 mm
Exterior sealing system
Cross point sealing plates and transom sealing pieces sloping connection
■ Technical information
– Pressure profiles sealing pieces
No. 014080 to 014085, 152402 to 152422
for self-cutting acc. to angle (90°– α).
Angle α
– Cross point sealing plates
No. 016080 to 016085 for self-cutting acc.
to angle (90°– α). Cutted pieces have
to be plane and burr-free.
90° to 84°
83° to
74° to
59° to
44° to
– T41 = Notch.
– T155 = Transom gasket.
75°
60°
45°
35°
Left
Right
Left E2
Right E2
no.
no.
no.
no.
152010 (50) 152010 (50) 152009 (50) 152009 (50)
152015 (56) 152015 (56) 152014 (56) 152014 (56)
152020 (76) 152020 (76) 152019 (76) 152019 (76)
152020
152020
152019
152019
152021
152024
152027
152030
152022
152025
152028
152031
152023
152026
152029
152032
– T186 = Self-cutting.
– T188 = Transom sealing piece.
Selection cross-point sealing plate
and pressure profile sealing piece (self-cutting acc. to angle)
Exterior gasket
5 mm
System
width
mm
Pressure and cover profile
Pressure
Pressure
Cross point
profile sealing profile sealing
sealing plate Width x
piece
piece
no.
mm
no.
no.
PU = 10 pc(s)
PU = 5 pc(s)
PU = 5 pc(s)
For pressure and cover profile
50
016080
36
014080
56
016081
37
014081
152402
152412
76
016082
39
014082
152422
For flat pressure profile
50
016083
28
014083
56
016084
29
014084
76
016085
31
014085
Flat pressure profile
K-0004
2016
215
THERM+ H-I
Assembly options
Selection of transom sealing piece
THERM+ H-I
Glazing/Sealing technology
Timber curtain wall 50 mm
Cutting and draw off dimensions
■ Technical information
– RB = Grid width
RH = Grid height.
– T53 = Length flatpressure profile = RB - 51.
– T54 = Length pressure profile with visible
screwed connection = RB - 51.
– T55 = Length cover profile clipped = RB - 51.
– T56 = Length pressure profile = RB - 55.
– T57 = Glass dimensions = RB or RH - 26.
– T58 = Length transom gasket
= RB - 28 + 0.5% add-on.
– T66 = Length of the base profile = RB - 56.
216
2016
KH-0800
THERM+ H-I
Glazing/Sealing technology
Timber curtain wall 56 mm
Cutting and draw off dimensions
■ Technical information
– RB = Grid width
RH = Grid height.
– T60 = Length flat pressure profile = RB - 57.
– T61 = Length pressure profile with visible
screwed connection = RB - 57.
– T62 = Length cover profile clipped = RB - 57.
THERM+ H-I
Assembly options
– T63 = Length pressure profile = RB - 61.
– T64 = Glass dimensions = RB or RH - 30.
– T65 = Length transom gasket
= RB - 34 + 0.5 % add-on.
– T91 = Length of the base profile = SW - 62.
KH-0801
2016
217
THERM+ H-I
Glazing/Sealing technology
Timber curtain wall 76 mm
Cutting and draw off dimensions
■ Technical information
– RB = Grid width
RH = Grid height.
– T64 = Glass dimension = RB or RH - 30.
– T92 = Length cover profile = RB - 77.
– T93 = Length pressure profile = RB - 81.
– T94 = Glass dimensions = RB or RH - 46.
– T95 = Length transom gasket
= RB - 54 + 0.5% add-on.
– T96 = Length profile = RB - 86.
Passive house with
insulating block P no. 168526
218
2016
KH-0802_0803
THERM+ H-I
Glazing/Sealing technology
Timber curtain wall 96 mm
Cutting and draw off dimensions
■ Technical information
– RB = Grid width
RH = Grid height.
– T97 = Length cover profile = RB - 97.
– T98 = Length pressure profile = RB - 101.
– T99 = Glass dimensions = RB or RH - 66.
THERM+ H-I
Assembly options
– T100 = Length transom gasket
= RB - 74 + 0.5% add-on.
– T101 = Length profile = RB - 106.
KH-0806
2016
219
THERM+ H-I
Glazing/Sealing technology
Timber curtain wall 50/56/76/96 mm
Screw selection
Pressure profiles with exterior gasket 3 mm
■ Technical information
– For the application of the pressure profile gaskets 4, 6, 7, 8, 9, 11
and 13 extended screws must be used.
– For pressure profile no. 118505,
118510, 118515, 118005, 118010,
118015, 118020.
Infill
thickness
mm
12
13 to 14
15 to 16
17 to 19
20 to 22
23 to 24
25 to 26
27 to 29
30 to 32
33 to 34
35 to 36
37 to 39
40 to 42
43 to 44
45 to 46
47 to 49
50 to 52
53 to 54
55 to 56
57 to 59
60 to 62
63 to 64
220
2016
No.
Length
mm
012108
012109
012110
012111
012112
012113
012114
012115
012116
012117
012118
012119
012129
012123
012124
012125
012106
012126
012144
012127
012200
012128
28
30
32
35
38
40
42
45
48
50
52
55
58
60
62
65
68
70
72
75
78
80
– For pressure profile no. 013007,
013027.
Infill
thickness
mm
12 to 14
15 to 17
18 to 19
20 to 21
22 to 24
25 to 27
28 to 29
30 to 31
32 to 34
35 to 37
38 to 39
40 to 41
42 to 44
45 to 47
48 to 49
50 to 51
52 to 54
55 to 57
58 to 59
60 to 61
62 to 64
No.
Length
mm
012011
012012
012139
012013
012014
012140
012015
012141
012016
012142
012017
012143
012018
012020
012146
012147
012148
012260
012149
012261
012262
35
38
40
42
45
48
50
52
55
58
60
62
65
68
70
72
75
78
80
82
85
KH-0040
– For pressure profile no. 013014,
013008, 013028.
Infill
thickness
mm
12
13 to 14
15 to 17
18 to 20
21 to 22
23 to 24
25 to 27
28 to 30
31 to 32
33 to 34
35 to 37
38 to 40
41 to 42
43 to 44
45 to 47
48 to 50
51 to 52
53 to 54
55 to 57
58 to 60
61 to 62
63 to 64
No.
Length
mm
012138
012010
012011
012012
012139
012013
012014
012140
012015
012141
012016
012142
012017
012143
012018
012020
012146
012147
012148
012260
012149
012261
30
32
35
38
40
42
45
48
50
52
55
58
60
62
65
68
70
72
75
78
80
82
THERM+ H-I
Glazing/Sealing technology
– For pressure profile no. 118005,
118010, 118015, 118020.
Infill
thickness
mm
12 to 13
14 to 15
16 to 18
19 to 21
22 to 23
24 to 25
26 to 28
29 to 31
32 to 33
34 to 35
36 to 38
39 to 41
42 to 43
44 to 45
46 to 48
49 to 51
52 to 53
54 to 55
56 to 58
59 to 61
62 to 63
64
No.
Length
mm
012109
012110
012111
012112
012113
012114
012115
012116
012117
012118
012119
012129
012123
012124
012125
012106
012126
012144
012127
012200
012128
012201
30
32
35
38
40
42
45
48
50
52
55
58
60
62
65
68
70
72
75
78
80
82
– For pressure profile no. 013007,
013027.
Infill
thickness
mm
12 to 13
14 to 16
17 to 18
19 to 20
21 to 23
24 to 26
27 to 28
29 to 30
31 to 33
34 to 36
37 to 38
39 to 40
41 to 43
44 to 46
47 to 48
49 to 50
51 to 53
54 to 56
57 to 58
59 to 60
61 to 63
64
No.
Length
mm
012011
012012
012139
012013
012014
012140
012015
012141
012016
012142
012017
012143
012018
012020
012146
012147
012148
012260
012149
012261
012262
012265
35
38
40
42
45
48
50
52
55
58
60
62
65
68
70
72
75
78
80
82
85
88
KH-0050
THERM+ H-I
Assembly options
Timber curtain wall 50/56/76/96 mm
Screw selection
Pressure profiles with exterior gasket 5 mm
– For pressure profile no. 013014,
013008, 013028.
Infill
thickness
mm
12 to 13
14 to 16
17 to 19
20 to 21
22 to 23
24 to 26
27 to 29
30 to 31
32 to 33
34 to 36
37 to 39
40 to 41
42 to 43
44 to 46
47 to 49
50 to 51
52 to 53
54 to 56
57 to 59
60 to 61
62 to 63
64
No.
Length
mm
012010
012011
012012
012139
012013
012014
012140
012015
012141
012016
012142
012017
012143
012018
012020
012146
012147
012148
012260
012149
012261
012262
32
35
38
40
42
45
48
50
52
55
58
60
62
65
68
70
72
75
78
80
82
85
2016
221
THERM+ H-I
Glazing/Sealing technology
Timber curtain wall 50/56/76 mm
Screw selection
Flat pressure profiles with exterior gasket 2 mm
– For pressure profile no. 013300,
013310, 013313.
Infill
thickness
mm
22 to 23
24 to 26
27 to 29
30 to 31
32 to 33
34 to 36
37 to 39
40 to 41
42 to 43
44 to 46
47 to 49
50 to 51
52 to 53
54 to 56
57 to 59
60 to 61
62 to 63
64
222
2016
No.
Length
mm
012010
012011
012012
012139
012013
012014
012140
012015
012141
012016
012142
012017
012143
012018
012020
012146
012147
012148
32
35
38
40
42
45
48
50
52
55
58
60
62
65
68
70
72
75
– For pressure profile no. 013300,
013310, 013313.
Infill
thickness
mm
22 to 24
25 to 27
28 to 29
30 to 31
32 to 34
35 to 37
38 to 39
40 to 41
42 to 44
45 to 47
48 to 49
50 to 51
52 to 54
55 to 57
58 to 59
60 to 61
62 to 64
No.
Length
mm
012174
012175
012176
012177
012178
012179
012180
012181
012182
012183
012184
012185
012186
012190
012187
012192
012188
35
38
40
42
45
48
50
52
55
58
60
62
65
68
70
72
75
KH-0042
– For pressure profile no. 013300,
013310, 013313.
Infill
thickness
mm
22 to 23
24 to 25
26 to 28
29 to 31
32 to 33
34 to 35
36 to 38
39 to 41
42 to 43
44 to 45
46 to 48
49 to 51
52 to 53
54 to 55
56 to 58
59 to 61
62 to 63
64
No.
Length
mm
012109
012110
012111
012112
012113
012114
012115
012116
012117
012118
012119
012129
012123
012124
012125
012106
012126
012144
30
32
35
38
40
42
45
48
50
52
55
58
60
62
65
68
70
72
THERM+ H-I
Glazing/Sealing technology
– For pressure profile no. 118505,
118510, 118515, 118005, 118010,
118015, 118020.
Infill
thickness
mm
4
5 to 6
7 to 9
10 to 12
13 to 14
15 to 16
17 to 19
20 to 22
23 to 24
25 to 26
27 to 29
30 to 32
33 to 34
35 to 36
37 to 39
40 to 42
43 to 44
45 to 46
47 to 49
50 to 52
No.
Length
mm
012109
012110
012111
012112
012113
012114
012115
012116
012117
012118
012119
012129
012123
012124
012125
012106
012126
012144
012127
012200
30
32
35
38
40
42
45
48
50
52
55
58
60
62
65
68
70
72
75
78
– For pressure profile no. 013007,
013027.
Infill
thickness
mm
4
5 to 7
8 to 9
10 to 11
12 to 14
15 to 17
18 to 19
20 to 21
22 to 24
25 to 27
28 to 29
30 to 31
32 to 34
35 to 37
38 to 39
40 to 41
42 to 44
45 to 47
48 to 49
50 to 51
52
No.
Length
mm
012011
012012
012139
012013
012014
012140
012015
012141
012016
012142
012017
012143
012018
012020
012146
012147
012148
012260
012149
012261
012262
35
38
40
42
45
48
50
52
55
58
60
62
65
68
70
72
75
78
80
82
85
KH-0064
THERM+ H-I
Assembly options
Timber curtain wall 50 mm
Screw selection
Pressure profiles with exterior gasket 26 mm
– For pressure profile no. 013014,
013008, 013028.
Infill
thickness
mm
4
5 to 7
8 to 10
11 to 12
13 to 14
15 to 17
18 to 20
21 to 22
23 to 24
25 to 27
28 to 30
31 to 32
33 to 34
35 to 37
38 to 40
41 to 42
43 to 44
45 to 47
48 to 50
51 to 52
No.
Length
mm
012010
012011
012012
012139
012013
012014
012140
012015
012141
012016
012142
012017
012143
012018
012020
012146
012147
012148
012260
012149
32
35
38
40
42
45
48
50
52
55
58
60
62
65
68
70
72
75
78
80
2016
223
THERM+ H-I
Glazing/Sealing technology
Timber curtain wall 50/56 mm
Screw selection
Glazing with silicone joint and suction discs
– For suction disc no. 163807,
163810, 163812.
Infill
thickness
mm
20 to 21
22 to 23
24 to 25
26 to 27
28 to 29
30 to 31
32 to 33
34 to 35
36 to 37
38 to 39
40 to 41
42 to 43
44 to 45
46 to 47
48 to 49
50 to 51
52 to 53
54 to 55
56 to 58
59 to 61
62 to 64
224
2016
RAL 9004
no.
907204
907206
907208
907210
907212
907214
907216
907218
907220
907222
907224
907226
907228
907230
907232
907234
907236
907238
907240
907242
907244
– For suction disc no. 163807,
163810, 163812.
Stainless
steel
no.
907254
907256
907258
907260
907262
907264
907266
907268
907270
907272
907274
907276
907278
907280
907282
907284
907286
907288
907290
907292
907294
Length
mm
Infill
thickness
mm
10 to 13
13 to 14
15 to 16
17 to 18
19 to 20
21 to 22
23 to 24
39
41
43
45
47
49
51
53
55
57
59
61
63
65
67
69
71
73
75
78
81
KH-0062, KH-0066
RAL 9004
no.
907204
907206
907208
907210
907212
907214
907216
Stainless
steel
no.
907254
907256
907258
907260
907262
907264
907266
Length
mm
39
41
43
45
47
49
51
THERM+ H-I
Accessories
Timber curtain wall 50/56/76/96 mm
Fixation of sun protection
Assembly and information
Selection of sockets
– The fixation of the sun protection can be used
for all system widths and pressure and cover profiles.
No.
– Assembling at any time, even at existing curtain walls.
– For the selection of stainless steel sockets see table.
The length results from the selection of pressure and
cover profiles as well as from the infill thickness (detailed
information see handling manual).
– Applied load figueres see following pages.
– Max. usability force FH regarding to one pair of sockets.
– Max. usability force FH is constant at every load distance → FH = 0.80 kN.
– A force crosswise to the mullion cannot be taken → FQ = 0 kN.
– The indicated loads are dimensioning loads.
– A connection plate by the customer (min. 40 x 10 mm) is used for leading
the forces into the the screws.
– The screws 5.5 has to be bolted with a bolting torque of min. 8 Nm.
– The fixation of sun protection can only be used by pairs.
– For each assembling situation a statical calculation is mandatory.
The influencing variables of EUROCODE 1 and DIN 1055 have
to be considered.
– T13 = Infill thickness.
– T33 = Fixation of sun protection.
169942
169946
169950
169954
169958
169962
169966
169970
169974
169978
169982
169986
169990
169994
169998
169999
Length
mm
42
46
50
54
58
62
66
70
74
78
82
86
90
94
98
102
Selection of sleeves
No.
169900
169901
169902
169903
169904
169905
169906
169907
169908
169909
169910
169911
169912
169913
169914
169915
169917
169918
169919
Length
mm
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
42
44
46
– T34 = Length of socket.
– T35 = Offset point of application a.
– T185 = Dimensioning example for connection plate provided by customer.
– T224 = See table.
to
T224
T185
ZH-1021
2016
225
THERM+ H-I
Assembly options
■ Technical information
THERM+ H-I
Accessories
Timber curtain wall 50/56/76/96 mm
Fixation of sun protection
Screw distance 90 mm
Vertical force in use F [kN]
1.15
1.10
■ Technical information
1.05
Calculation basis:
1.00
0.95
– Horizontal force FH: 0.8 kN.
0.90
– Thickness of connection plate: 10 mm.
0.85
– Material connection plate: Aluminium.
0.80
– Assembling and additional information
see previous page.
0.75
0.70
0.65
– a = Offset point of application.
0.60
0.55
0.50
0.45
0.40
0.35
0.30
Length of
socket [mm]
Screw distance 130 mm
Screw distance 110 mm
Vertical force in use F [kN]
Vertical force in use F [kN]
1.15
1.15
1.10
1.10
1.05
1.05
1.00
1.00
0.95
0.95
0.90
0.90
0.85
0.85
0.80
0.80
0.75
0.75
0.70
0.70
0.65
0.65
0.60
0.60
0.55
0.55
0.50
0.50
0.45
0.45
0.40
0.40
0.35
0.35
0.30
Length of
socket [mm]
0.30
Screw distance 150 mm
Length of
socket [mm]
Screw distance 170 mm
Vertical force in use F [kN]
Vertical force in use F [kN]
1.15
1.15
1.10
1.10
1.05
1.05
1.00
1.00
0.95
0.95
0.90
0.90
0.85
0.85
0.80
0.80
0.75
0.75
0.70
0.70
0.65
0.65
0.60
0.60
0.55
0.55
0.50
0.50
0.45
0.45
0.40
0.40
0.35
0.35
0.30
0.30
Length of
socket [mm]
226
2016
Length of
socket [mm]
ZH-1020
THERM+ H-I
Accessories
Timber curtain wall 50/56/76 mm
Fixation of sun protection for cover profiles 12 mm
Exterior gasket 3 mm
■ Technical information
– Cover profiles:
No. 013004 (50 mm)
No. 013024 (56 mm)
No. 013051 (76 mm)
– T74 = Infill thickness.
■ Selection of sockets and sealing sleeves
Infill thickness
mm
20
21 to 22
23 to 24
25 to 26
27 to 28
29 to 30
31 to 32
33 to 34
35 to 36
37 to 38
39 to 40
41 to 42
43 to 44
45 to 46
47 to 48
49 to 50
51 to 52
53 to 54
55 to 56
57 to 58
59 to 60
61 to 62
63 to 64
ZH-1001
No. socket
No. sealing sleeve
169942
169946
169946
169950
169950
169954
169954
169958
169958
169962
169962
169966
169966
169970
169970
169974
169974
169978
169978
169982
169982
169986
169986
169903
169904
169903
169904
169903
169904
169903
169904
169903
169904
169903
169904
169903
169904
169903
169904
169903
169904
169903
169904
169903
169904
169903
2016
227
THERM+ H-I
Assembly options
– Pressure profiles:
No. 118005 (50 mm)
No. 118010 (56 mm)
No. 118015 (76 mm)
THERM+ H-I
Accessories
Timber curtain wall 50/56/76 mm
Fixation of sun protection for cover profiles 12 mm
Exterior gasket 5 mm
■ Technical information
– Pressure profiles:
No. 118005 (50 mm)
No. 118010 (56 mm)
No. 118015 (76 mm)
– Cover profiles:
No. 013004 (50 mm)
No. 013024 (56 mm)
No. 013051 (76 mm)
– T74 = Infill thickness.
■ Selection of sockets and sealing sleeves
Infill thickness
mm
20 to 21
22 to 23
24 to 25
26 to 27
28 to 29
30 to 31
32 to 33
34 to 35
36 to 37
38 to 39
40 to 41
42 to 43
44 to 45
46 to 47
48 to 49
50 to 51
52 to 53
54 to 55
56 to 57
58 to 59
60 to 61
62 to 63
64
228
2016
ZH-1001
No. socket
No. sealing sleeve
169946
169946
169950
169950
169954
169954
169958
169958
169962
169962
169966
169966
169970
169970
169974
169974
169978
169978
169982
169982
169986
169986
169990
169904
169903
169904
169903
169904
169903
169904
169903
169904
169903
169904
169903
169904
169903
169904
169903
169904
169903
169904
169903
169904
169903
169904
THERM+ H-I
Accessories
Timber curtain wall 50/56/76/96 mm
Fixation of sun protection for cover profiles 15 mm
Exterior gasket 3 mm
■ Technical information
– Cover profiles:
No. 013003 (50 mm)
No. 013023 (56 mm)
No. 013050 (76 mm)
No. 141710 (96 mm)
– T74 = Infill thickness.
T74
■ Selection of sockets and sealing sleeves
Infill thickness
mm
20
21
22
23 to 24
25
26
27 to 28
29
30
31 to 32
33
34
35 to 36
37
38
39 to 40
41
42
43 to 44
45
46
47 to 48
49
50
51 to 52
53
54
55 to 56
57
58
59 to 60
61
62
63 to 64
ZH-1002
No. socket
No. sealing sleeve
169946
169946
169950
169950
169950
169954
169954
169954
169958
169958
169958
169962
169962
169962
169966
169966
169966
169970
169970
169970
169974
169974
169974
169978
169978
169978
169982
169982
169982
169986
169986
169986
169990
169990
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
2016
229
THERM+ H-I
Assembly options
– Pressure profiles:
No. 118005 (50 mm)
No. 118010 (56 mm)
No. 118015 (76 mm)
No. 118020 (96 mm)
THERM+ H-I
Accessories
Timber curtain wall 50/56/76/96 mm
Fixation of sun protection for cover profiles 15 mm
Exterior gasket 5 mm
■ Technical information
– Pressure profiles:
No. 118005 (50 mm)
No. 118010 (56 mm)
No. 118015 (76 mm)
No. 118020 (96 mm)
– Cover profiles:
No. 013003 (50 mm)
No. 013023 (56 mm)
No. 013050 (76 mm)
No. 141710 (96 mm)
– T74 = Infill thickness.
■ Selection of sockets and sealing sleeves
T74
Infill thickness
mm
20
21
22 to 23
24
25
26 to 27
28
29
30 to 31
32
33
34 to 35
36
37
38 to 39
40
41
42 to 43
44
45
46 to 47
48
49
50 to 51
52
53
54 to 55
56
57
58 to 59
60
61
62 to 63
64
230
2016
ZH-1002
No. socket
No. sealing sleeve
169946
169950
169950
169950
169954
169954
169954
169958
169958
169958
169962
169962
169962
169966
169966
169966
169970
169970
169970
169974
169974
169974
169978
169978
169978
169982
169982
169982
169986
169986
169986
169990
169990
169990
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
THERM+ H-I
Accessories
Timber curtain wall 50/56/76 mm
Fixation of sun protection for cover profiles 20 mm
Exterior gasket 3 mm
■ Technical information
– Cover profiles:
No. 013210 (50 mm)
No. 013410 (56 mm)
No. 013610 (76 mm)
– T74 = Infill thickness.
■ Selection of sockets and sealing sleeves
T74
Infill thickness
mm
20
21 to 22
23 to 24
25 to 26
27 to 28
29 to 30
31 to 32
33 to 34
35 to 36
37 to 38
39 to 40
41 to 42
43 to 44
45 to 46
47 to 48
49 to 50
51 to 52
53 to 54
55 to 56
57 to 58
59 to 60
61 to 62
63 to 64
ZH-1004
No. socket
No. sealing sleeve
169950
169954
169954
169958
169958
169962
169962
169966
169966
169970
169970
169974
169974
169978
169978
169982
169982
169986
169986
169990
169990
169994
169994
169907
169908
169907
169908
169907
169908
169907
169908
169907
169908
169907
169908
169907
169908
169907
169908
169907
169908
169907
169908
169907
169908
169907
2016
231
THERM+ H-I
Assembly options
– Pressure profiles:
No. 118005 (50 mm)
No. 118010 (56 mm)
No. 118015 (76 mm)
THERM+ H-I
Accessories
Timber curtain wall 50/56/76 mm
Fixation of sun protection for cover profiles 20 mm
Exterior gasket 5 mm
■ Technical information
– Pressure profiles:
No. 118005 (50 mm)
No. 118010 (56 mm)
No. 118015 (76 mm)
– Cover profiles:
No. 013210 (50 mm)
No. 013410 (56 mm)
No. 013610 (76 mm)
– T74 = Infill thickness.
■ Selection of sockets and sealing sleeves
T74
Infill thickness
mm
20 to 21
22 to 23
24 to 25
26 to 27
28 to 29
30 to 31
32 to 33
34 to 35
36 to 37
38 to 39
40 to 41
42 to 43
44 to 45
46 to 47
48 to 49
50 to 51
52 to 53
54 to 55
56 to 57
58 to 59
60 to 61
62 to 63
64
232
2016
ZH-1004
No. socket
No. sealing sleeve
169954
169954
169958
169958
169962
169962
169966
169966
169970
169970
169974
169974
169978
169978
169982
169982
169986
169986
169990
169990
169994
169994
169998
169908
169907
169908
169907
169908
169907
169908
169907
169908
169907
169908
169907
169908
169907
169908
169907
169908
169907
169908
169907
169908
169907
169908
THERM+ H-I
Accessories
Timber curtain wall 50/56/76 mm
Fixation of sun protection for cover profiles 25 mm
Exterior gasket 3 mm
■ Technical information
– Cover profiles:
No. 013005 (50 mm)
No. 013025 (56 mm)
No. 141505 (76 mm)
No. 013201 (50 mm)
No. 013400 (56 mm)
– T74 = Infill thickness.
T74
■ Selection of sockets and sealing sleeves
Infill thickness
mm
20
21 to 22
23
24
25 to 26
27
28
29 to 30
31
32
33 to 34
35
36
37 to 38
39
40
41 to 42
43
44
45 to 46
47
48
49 to 50
51
52
53 to 54
55
56
57 to 58
59
60
61 to 62
63
64
ZH-1003
No. socket
No. sealing sleeve
169954
169954
169954
169958
169958
169958
169962
169962
169962
169966
169966
169966
169970
169970
169970
169974
169974
169974
169978
169978
169978
169982
169982
169982
169986
169986
169986
169990
169990
169990
169994
169994
169994
169998
169909
169908
169907
169909
169908
169907
169909
169908
169907
169909
169908
169907
169909
169908
169907
169909
169908
169907
169909
169908
169907
169909
169908
169907
169909
169908
169907
169909
169908
169907
169909
169908
169907
169909
2016
233
THERM+ H-I
Assembly options
– Pressure profiles:
No. 118005 (50 mm)
No. 118010 (56 mm)
No. 118015 (76 mm)
THERM+ H-I
Accessories
Timber curtain wall 50/56/76 mm
Fixation of sun protection for cover profiles 25 mm
Exterior gasket 5 mm
■ Technical information
– Pressure profiles:
No. 118005 (50 mm)
No. 118010 (56 mm)
No. 118015 (76 mm)
– Cover profiles:
No. 013005 (50 mm)
No. 013025 (56 mm)
No. 141505 (76 mm)
No. 013201 (50 mm)
No. 013400 (56 mm)
– T74 = Infill thickness.
■ Selection of sockets and sealing sleeves
T74
Infill thickness
mm
20 to 21
22
23
24 to 25
26
27
28 to 29
30
31
32 to 33
34
35
36 to 37
38
39
40 to 41
42
43
44 to 45
46
47
48 to 49
50
51
52 to 53
54
55
56 to 57
58
59
60 to 61
62
63
64
234
2016
ZH-1003
No. socket
No. sealing sleeve
169954
169954
169958
169958
169958
169962
169962
169962
169966
169966
169966
169970
169970
169970
169974
169974
169974
169978
169978
169978
169982
169982
169982
169986
169986
169986
169990
169990
169990
169994
169994
169994
169998
169998
169908
169907
169909
169908
169907
169909
169908
169907
169909
169908
169907
169909
169908
169907
169909
169908
169907
169909
169908
169907
169909
169908
169907
169909
169908
169907
169909
169908
169907
169909
169908
169907
169909
169908
THERM+ H-I
Accessories
Timber curtain wall 50/56/76/96 mm
Fixation of sun protection for pressure profiles 7 mm
Exterior gasket 3 mm
■ Technical information
– Pressure profiles:
No. 013018 (50 mm)
No. 013038 (56 mm)
No. 013068 (76 mm)
No. 142770 (96 mm)
T74
50 / 56 / 76 / 96
■ Selection of sockets and sealing sleeves
Infill thickness
mm
20
21 to 22
23
24
25 to 26
27
28
29 to 30
31
32
33 to 34
35
36
37 to 38
39
40
41 to 42
43
44
45 to 46
47
48
49 to 50
51
52
53 to 54
55
56
57 to 58
59
60
61 to 62
63
64
ZH-1005
No. socket
No. sealing sleeve
169942
169946
169946
169946
169950
169950
169950
169954
169954
169954
169958
169958
169958
169962
169962
169962
169966
169966
169966
169970
169970
169970
169974
169974
169974
169978
169978
169978
169982
169982
169982
169986
169986
169986
169900
169902
169901
169900
169902
169901
169900
169902
169901
169900
169902
169901
169900
169902
169901
169900
169902
169901
169900
169902
169901
169900
169902
169901
169900
169902
169901
169900
169902
169901
169900
169902
169901
169900
2016
235
THERM+ H-I
Assembly options
– T74 = Infill thickness.
THERM+ H-I
Accessories
Timber curtain wall 50/56/76/96 mm
Fixation of sun protection for pressure profiles 7 mm
Exterior gasket 5 mm
■ Technical information
– Pressure profiles:
No. 013018 (50 mm)
No. 013038 (56 mm)
No. 013068 (76 mm)
No. 142770 (96 mm)
– T74 = Infill thickness.
50 / 56 / 76 / 96
■ Selection of sockets and sealing sleeves
T74
Infill thickness
mm
20 to 21
22
23
24 to 25
26
27
28 to 29
30
31
32 to 33
34
35
36 to 37
38
39
40 to 41
42
43
44 to 45
46
47
48 to 49
50
51
52 to 53
54
55
56 to 57
58
59
60 to 61
62
63
64
236
2016
ZH-1005
No. socket
No. sealing sleeve
169946
169946
169946
169950
169950
169950
169954
169954
169954
169958
169958
169958
169962
169962
169962
169966
169966
169966
169970
169970
169970
169974
169974
169974
169978
169978
169978
169982
169982
169982
169986
169986
169986
169990
169902
169901
169900
169902
169901
169900
169902
169901
169900
169902
169901
169900
169902
169901
169900
169902
169901
169900
169902
169901
169900
169902
169901
169900
169902
169901
169900
169902
169901
169900
169902
169901
169900
169902
THERM+ H-I
Accessories
Timber curtain wall 50/56 mm
Fixation of sun protection for pressure profiles 9 mm
Exterior gasket 3 mm
■ Technical information
– Pressure profiles:
No. 013008 (50 mm)
No. 013028 (56 mm)
T74
■ Selection of sockets and sealing sleeves
Infill thickness
mm
20
21 to 22
23
24
25 to 26
27
28
29 to 30
31
32
33 to 34
35
36
37 to 38
39
40
41 to 42
43
44
45 to 46
47
48
49 to 50
51
52
53 to 54
55
56
57 to 58
59
60
61 to 62
63
64
ZH-1006
No. socket
No. sealing sleeve
169946
169946
169946
169950
169950
169950
169954
169954
169954
169958
169958
169958
169962
169962
169962
169966
169966
169966
169970
169970
169970
169974
169974
169974
169978
169978
169978
169982
169982
169982
169986
169986
169986
169990
169902
169901
169900
169902
169901
169900
169902
169901
169900
169902
169901
169900
169902
169901
169900
169902
169901
169900
169902
169901
169900
169902
169901
169900
169902
169901
169900
169902
169901
169900
169902
169901
169900
169902
2016
237
THERM+ H-I
Assembly options
– T74 = Infill thickness.
THERM+ H-I
Accessories
Timber curtain wall 50/56 mm
Fixation of sun protection for pressure profiles 9 mm
Exterior gasket 5 mm
■ Technical information
– Pressure profiles:
No. 013008 (50 mm)
No. 013028 (56 mm)
– T74 = Infill thickness.
■ Selection of sockets and sealing sleeves
T74
Infill thickness
mm
20 to 21
22
23
24 to 25
26
27
28 to 29
30
31
32 to 33
34
35
36 to 37
38
39
40 to 41
42
43
44 to 45
46
47
48 to 49
50
51
52 to 53
54
55
56 to 57
58
59
60 to 61
62
63
64
238
2016
ZH-1006
No. socket
No. sealing sleeve
169946
169946
169950
169950
169950
169954
169954
169954
169958
169958
169958
169962
169962
169962
169966
169966
169966
169970
169970
169970
169974
169974
169974
169978
169978
169978
169982
169982
169982
169986
169986
169986
169990
169990
169901
169900
169902
169901
169900
169902
169901
169900
169902
169901
169900
169902
169901
169900
169902
169901
169900
169902
169901
169900
169902
169901
169900
169902
169901
169900
169902
169901
169900
169902
169901
169900
169902
169901
THERM+ H-I
Accessories
Timber curtain wall 50/56 mm
Fixation of sun protection for pressure profiles 12 mm
Exterior gasket 3 mm
■ Technical information
– Pressure profiles:
No. 013007 (50 mm)
No. 013027 (56 mm)
T74
■ Selection of sockets and sealing sleeves
Infill thickness
mm
20
21
22 to 23
24
25
26 to 27
28
29
30 to 31
32
33
34 to 35
36
37
38 to 39
40
41
42 to 43
44
45
46 to 47
48
49
50 to 51
52
53
54 -55
56
57
58 to 59
60
61
62 to 63
64
ZH-1007
No. socket
No. sealing sleeve
169946
169950
169950
169950
169954
169954
169954
169958
169958
169958
169962
169962
169962
169966
169966
169966
169970
169970
169970
169974
169974
169974
169978
169978
169978
169982
169982
169982
169986
169986
169986
169990
169990
169990
169900
169902
169901
169900
169902
169901
169900
169902
169901
169900
169902
169901
169900
169902
169901
169900
169902
169901
169900
169902
169901
169900
169902
169901
169900
169902
169901
169900
169902
169901
169900
169902
169901
169900
2016
239
THERM+ H-I
Assembly options
– T74 = Infill thickness.
THERM+ H-I
Accessories
Timber curtain wall 50/56 mm
Fixation of sun protection for pressure profiles 12 mm
Exterior gasket 5 mm
■ Technical information
– Pressure profiles:
No. 013007 (50 mm)
No. 013027 (56 mm)
– T74 = Infill thickness.
■ Selection of sockets and sealing sleeves
T74
Infill thickness
mm
20
21 to 22
23
24
25 to 26
27
28
29 to 30
31
32
33 to 34
35
36
37 to 38
39
40
41 to 42
43
44
45 to 46
47
48
49 to 50
51
52
53 to 54
55
56
57 to 58
59
60
61 to 62
63
64
240
2016
ZH-1007
No. socket
No. sealing sleeve
169950
169950
169950
169954
169954
169954
169958
169958
169958
169962
169962
169962
169966
169966
169966
169970
169970
169970
169974
169974
169974
169978
169978
169978
169982
169982
169982
169986
169986
169986
169990
169990
169990
169994
169902
169901
169900
169902
169901
169900
169902
169901
169900
169902
169901
169900
169902
169901
169900
169902
169901
169900
169902
169901
169900
169902
169901
169900
169902
169901
169900
169902
169901
169900
169902
169901
169900
169902
THERM+ H-I
Accessories
Timber curtain wall 50 mm
Fixation of sun protection for pressure profiles 25 mm
Exterior gasket 3 mm
■ Technical information
– Pressure profiles:
No. 013014 (50 mm)
T74
■ Selection of sockets and sealing sleeves
Infill thickness
mm
20
21 to 22
23
24 to 25
26
27
28
29 to 30
31
32
33 to 34
35
36
37 to 38
39
40
41 to 42
43
44
45 to 46
47
48
49 to 50
51
52
53 to 54
55
56
57 to 58
59
60
61 to 62
63
64
ZH-1011
No. socket
No. sealing sleeve
169954
169954
169954
169958
169958
169958
169962
169962
169962
169966
169966
169966
169970
169970
169970
169974
169974
169974
169978
169978
169978
169982
169982
169982
169986
169986
169986
169990
169990
169990
169994
169994
169994
169998
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
2016
241
THERM+ H-I
Assembly options
– T74 = Infill thickness.
THERM+ H-I
Accessories
Timber curtain wall 50 mm
Fixation of sun protection for pressure profiles 25 mm
Exterior gasket 5 mm
■ Technical information
– Pressure profiles:
No. 013014 (50 mm)
– T74 = Infill thickness.
■ Selection of sockets and sealing sleeves
T74
Infill thickness
mm
20 to 21
22
23
24 to 25
26
27
28 to 29
30
31
32 to 33
34
35
36 to 37
38
39
40 to 41
42
43
44 to 45
46
47
48 to 49
50
51
52 to 53
54
55
56 to 57
58
59
60 to 61
62
63
64
242
2016
ZH-1011
No. socket
No. sealing sleeve
169954
169954
169958
169958
169958
169962
169962
169962
169966
169966
169966
169970
169970
169970
169974
169974
169974
169978
169978
169978
169982
169982
169982
169986
169986
169986
169990
169990
169990
169994
169994
169994
169998
169998
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
THERM+ H-I
Accessories
Timber curtain wall 50/56/76 mm
Fixation of sun protection for flat pressure profiles 3 mm
Exterior gasket 2 mm
■ Technical information
– Pressure profiles:
No. 013300 (50 mm)
No. 013310 (56 mm)
No. 013313 (76 mm)
T74
■ Selection of sockets and sealing sleeves
Infill thickness
mm
24 to 25
26
27
28 to 29
30
31
32 to 33
34
35
36 to 37
38
39
40 to 41
42
43
44 to 45
46
47
48 to 49
50
51
52 to 53
54
55
56 to 57
58
59
60 to 61
62
63
64
ZH-1010
No. socket
No. sealing sleeve
169942
169942
169946
169946
169946
169950
169950
169950
169954
169954
169954
169958
169958
169958
169962
169962
169962
169966
169966
169966
169970
169970
169970
169974
169974
169974
169978
169978
169978
169982
169982
169901
169900
169902
169901
169900
169902
169901
169900
169902
169901
169900
169902
169901
169900
169902
169901
169900
169902
169901
169900
169902
169901
169900
169902
169901
169900
169902
169901
169900
169902
169901
2016
243
THERM+ H-I
Assembly options
– T74 = Infill thickness.
THERM+ H-I
Accessories
Timber curtain wall 50/56/76/96 mm
Assembly scaffolding anchors
■ Technical information
Selection of fastening screws
– The base profile ist screwed to the
scaffolding anchors range in addition.
– Scaffolding fixation no. 166235 with
screw no. 012110.
– Expansion structure profile cannot take
forces right-angled to the structural profile (Frt).
– Please order additionally:
- 1 halfen screw no. 907605.
- 1 cover 15 white no. 167075
or
- 1 cover 15 black no. 167076.
– Application of flat pressure profile possible
from an infill thickness of 32 mm.
– The number and position of the fixation points
depends on the specific requirements of the scaffold.
The max. load transmission into the curtain wall
construction is system immanent and can be taken
from the table Representative parameter.
Representative parameter
– T182 = Assembly scaffolding anchor.
– T183 = Offset posts.
– T184 = Height of scaffold.
244
2016
ZH-0022
Right-angled
to structural
profile Frt
Parallel
to structural
profile Fpt
Right-angled
to curtain wall
Frf
0.53 kN
4.58 kN
12.87 kN
THERM+ H-I
Accessories
Timber curtain wall 50/56/76/96 mm
Fixture unit
– Assembling the fixture unit
no. 166206 with:
- 3 screws no. 908655 (PU = 100 pc(s)).
- 4 screws no. 908020 (PU = 100 pc(s)).
– Fixation in consideration of construction
circumstances and statical requirements.
– For each assembling situation a statical
calculation is mandatory. The influencing
variables of DIN 1055 has to be considered.
– Please consider several international, national,
regional and local laws and rules.
– The common and accepted rules of technique
have to be considered.
– T68 = Offset action point a.
Additional loads
Vertical load Fv in combination with horizontal load Fh
(offset action point a = 100)
Fv [kN]
7.0
6.0
5.0
4.0
3.0
2.0
1.0
Fh [kN]
1.0
2.0
3.0
3.5
4.5
5.5
6.5
Vertical load Fv in combination with horizontal load Fh
(offset action point a = 180)
Fv [kN]
4.0
3.5
3.0
2.5
2.0
1.5
1.0
Fh [kN]
0.8
1.7
2.5
3.4
4.2
5.1
5.9
Diagonal pull Fd in consideration of angle α
(offset action point a = 100)
α [°]
50
45
40
35
30
Fd [kN]
5.5
5.5
5.5
5.6
5.7
– T69 = Fixation bracket.
– T164 = Built-in conditions.
– T165 = Presentation without glass
and exterior gasket.
ZH-0021
2016
245
THERM+ H-I
Assembly options
■ Technical information
THERM+ H-I
Accessories
Timber curtain wall 50/56/76 mm
Connection profiles for transom and mullion gasket
Connection with gasket without flap
■ Technical information
– Bolted with no. 908118.
– *Gasket easy to tear off to 3 / 7 / 9 mm.
– ** With sheet t = 3 mm (self-production)
instead of no. 051012 (t = 2.2 mm).
– T13 = Infill thickness.
246
2016
Selection of gaskets and profiles
Infill
thickness
mm
24
25**
26
27
28
29
30
31
32
33
34
35**
36
37
38
39
40
41
42
43
44
45**
46
47
48
49
50
51
52
53
54
55**
56
57
58
59
60
61
62
63
64
ZH-0009
Compensation
gasket
no.
–
–
227010
227032
227015
227032
227020
227032
227025
227032
227030
–
227010
227032
227015
227032
227020
227032
227025
227032
–
–
227010
227032
227015
227032
227020
227032
227025
227032
227030
–
227010
227032
227015
227032
227020
227032
227025
227032
227030
Compensation
profile
no.
–
–
–
–
–
–
–
–
–
–
–
227006
227006
227006
227006
227006
227006
227006
227006
227006
–
–
–
–
–
–
–
–
–
–
–
227006
227006
227006
227006
227006
227006
227006
227006
227006
227006
Connection
profile
no.
168021
(50/56)
168026
(76)
168031
(50/56)
168033
(76)
THERM+ H-I
Accessories
Timber curtain wall 50/56/76 mm
Connection profiles for transom and mullion gasket
Base point connection with gasket and flap
■ Technical information
– T248 = Compensation gasket.
Connection profile no. 168005 with 3 mm sheet
Selection compensation gasket
Selection compensation gasket
THERM+ H-I
Assembly options
Connection profile no. 168005 with 2 mm sheet
Infill thickness
mm
24
26
27
28
29
30
31
32
33
35
37
Gasket
No.
–
011080
011070
011077
011073
011076
011074
011071
011075
011072
011078
No.
Infill thickness
mm
25
27
28
29
30
31
32
33
34
36
38
PU
–
100 m
100 m
100 m
100 m
100 m
100 m
100 m
100 m
100 m
50 m
No.
No.
No.
Gasket
No.
–
011080
011070
011077
011073
011076
011074
011071
011075
011072
011078
PU
–
100 m
100 m
100 m
100 m
100 m
100 m
100 m
100 m
100 m
50 m
No.
No.
168005
No.
No.
No.
No.
ZH-0001
No.
2016
247
THERM+ H-I
Accessories
Timber curtain wall 50/56/76 mm
Connection profiles for transom and mullion gasket
Base point connection with compensation gasket
Selection of compensation gaskets
Infill
thickness
mm
22
24
25
26
27
28
29
30
31
33
35
248
2016
Compensation
gasket
mm
–
011080
011070
011077
011073
011076
011074
011071
011075
011072
011078
No.
No.
No.
No.
No.
No.
No.
No.
No.
No.
ZH-0003
Height
mm
PU
–
2
3
4
5
6
7
8
9
11
13
–
100 m
100 m
100 m
100 m
100 m
100 m
100 m
100 m
100 m
50 m
THERM+ H-I
Accessories
Timber curtain wall 50/56/76 mm
Connection profiles
Connection frame profile
■ Technical information
– Connection profile no. 168080:
- Continuous insertion for bottom and top connection.
- Cut out in mullion area for drainage/ventilation.
Article
– Observe the different rates of thermal expansion for the
screw connection of the aluminium window sill with the
synthetic connection profile.
ZH-0008
No.
PU
Connection profile 55/15
168080
6m
Connection profile 39/22
168021
6m
Connection profile 48/22
168026
6m
Connection profile 39/42
168031
6m
Connection profile 48/42
168033
6m
2016
249
THERM+ H-I
Assembly options
Selection of articles
THERM+ H-I
Accessories
Timber curtain wall 50/56/76 mm
Connection profiles
Ventilated/non-ventilated façade
■ Technical information
List of glass thickness compensation
– Max. weight of the pane at the connection profile: 50 kg.
Difference
allowed
mm
– For higher offsets between the two infill thicknesses
(infill thickness 1 – infill thickness 2) the compensation
profile 12 no. 013090, compensation height 12 mm,
may be used. (PU = 6 m).
18
19
20
21
22
23
24
25
26
27
28
– IT = Infill thickness.
– For more information see Processing.
Compensation gasket
No.
011070
011077
011073
011076
011074
011071
011075
–
011072
–
011078
Height
mm
3
4
5
6
7
8
9
–
11
–
13
PU
100 m
–
100 m
–
50 m
Difference D between the two glass infill thicknesses is
necessary for the selection.
(D = IT1 minus IT2; IT1 = 20 to 64 mm, IT2 = 2 to 46 mm).
No. 168060
IT 2
IT 1
250
2016
ZH-0006
THERM+ H-I
Accessories
Timber curtain wall 50/56/76/96 mm
Connection profiles
Terminal clamp as assembly aid for sheets and profiles
■ Technical information
– Applicable as an assembly aid or for the fixation
of sheets and connection profiles at hard-toreach places.
– Clamp thickness 1.5 to 3 mm.
THERM+ H-I
Assembly options
– Fixation with a suitable screw for hole Ø 6 mm.
ZH-0007
2016
251
THERM+ H-I
Accessories
Timber curtain wall 50/56/76 mm
Connection profiles
Fixture spring – interior compensation of different infill thicknesses
■ Technical information
– Table for the selection of the compensation
gasket see following page.
– Reduced glass weights have to be obtained
in individual cases.
– T13 = Infill thickness (IT).
and
252
2016
ZH-0010
6
8
64
62
60
58
56
54
52
50
48
46
44
42
40
38
36
34
32
30
18
20
22
24
26
30
32
34
36
38
40
42
44
46
48
50
52
54
THERM+ H-I
Assembly options
220327 220326 220325 220324 220323 220322 220321 220320
220327 220326 220325 220324 220323 220322 220321 220320
220327 220326 220325 220324 220323 220322 220321 220320
220327 220326 220325 220324 220323 220322 220321 220320
220327 220326 220325 220324 220323 220322 220321 220320
220327 220326 220325 220324 220323 220322 220321 220320
220327 220326 220325 220324 220323 220322 220321 220320
220327 220326 220325 220324 220323 220322 220321 220320
220327 220326 220325 220324 220323 220322 220321 220320
220327 220326 220325 220324 220323 220322 220321 220320
220327 220326 220325 220324 220323 220322 220321 220320
220327 220326 220325 220324 220323 220322 220321 220320
220327 220326 220325 220324 220323 220322 220321 220320
220327 220326 220325 220324 220323 220322 220321 220320
28
IT 2 (mm)
220327 220326 220325 220324 220323 220322 220321 220320
220327 220326 220325 220324 220323 220322 220321 220320
220327 220326 220325 220324 220323 220322 220321 220320
220327 220326 220325 220324 220323 220322 220321 220320
220327 220326 220325 220324 220323 220322 220321 220320
220327 220326 220325 220324 220323 220322 220321 220320
28
220326 220325 220324 220323 220322 220321 220320
16
24
220325 220324 220323 220322 220321 220320
14
26
220324 220323 220322 220321 220320
12
20
10
22
220323 220322 220321 220320
4
18
2
220322 220321 220320
16
IT 1
(mm)
Selection compensation gasket
THERM+ H-I
Accessories
Timber curtain wall 50/56/76 mm
Connection profiles
Table for the selection of compensation gasket
2016
253
THERM+ H-I
Accessories
Timber curtain wall 50/56 mm
Connection profiles
Stainless steel retainer for panel fixing
■ Technical information
Selection of retainer
– For fixing the panel before assembling
the pressure profile.
Infill
thickness
mm
24 to 25
26 to 27
28 to 29
30 to 31
32 to 33
34 to 35
36 to 37
38 to 39
40 to 41
42 to 43
44 to 45
46 to 47
48 to 49
50 to 51
52
– Retainer may stay at glass rebate.
– T13 = Infill thickness (IT).
Art.-Nr.
No.
167165
167165 –to167193
167193
No.
012103
254
2016
ZH-0030
No.
167165
167167
167169
167171
167173
167175
167177
167179
167181
167183
167185
167187
167189
167191
167193
THERM+ H-I
Accessories
Timber curtain wall 50/56/76 mm
Connection profiles
Selection of assembly angles for integration outer frame FRAME+ 75 WB
■ Technical information
Gap dimensions x and y
– For the positioning of assembly
angles see Processing.
– T13 = Infill thickness.
System
width
mm
Dim. x
No. 207666
Dim. x
Dim. y
No. 207667
Profile
width
mm
50
9
5
14
10
50
56
8
4
13
7
60
76
–
–
11
5
80
THERM+ H-I
Assembly options
– T141 = Selection of assembly angle
and screws see table.
Dim. y
x
y
Assembly angle and screws
75 WB for THERM+ I
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
Screw
Length / No.
22 mm
–
22 mm
25 mm
25 mm
25 mm
28 mm
28 mm
30 mm
30 mm
32 mm
–
32 mm
35 mm
35 mm
35 mm
38 mm
38 mm
40 mm
40 mm
42 mm
012105
–
012105
012107
012107
012107
012108
012108
012109
012109
012110
–
012110
012111
012111
012111
012112
012112
012113
012113
012114
Assembly
angle for
50 mm
167604
–
167606
167607
167608
167609
167610
167611
167612
167613
167614
–
167616
167617
167618
167619
167620
167621
167622
167623
167624
Assembly
angle for
56 mm
167654
–
167656
167657
167658
167659
167660
167661
167662
167663
167664
–
167666
167667
167668
167669
167670
167671
167672
167673
167674
Assembly
angle for
76 mm
Self-production
IT
mm
KH-0014
EPDM
compensation
gasket
without without
–
–
2 mm 227010
3 mm 227032
4 mm 227015
5 mm 227032
6 mm 227020
7 mm 227032
8 mm 227025
9 mm 227032
10 mm 227030
–
–
2 mm 227010
3 mm 227032
4 mm 227015
5 mm 227032
6 mm 227020
7 mm 227032
8 mm 227025
9 mm 227032
10 mm 227030
Synthetic
compensation
profile
without without
–
–
without without
without without
without without
without without
without without
without without
without without
without without
without without
–
–
10 mm 227006
10 mm 227006
10 mm 227006
10 mm 227006
10 mm 227006
10 mm 227006
10 mm 227006
10 mm 227006
10 mm 227006
2016
255
THERM+ H-I
Accessories
Timber curtain wall 50/56 mm
Connection profiles
Selection of assembly angles for integration outer frame FRAME+ 75 WB
■ Technical information
Gap dimensions x and y
– For the positioning of assembly
angles see Processing.
– T13 = Infill thickness.
– T141 = Selection of assembly angle
and screws see table.
System
width
mm
Dim. x
50
9
5
50
56
8
4
60
x
y
Assembly angle and screws
75 WB for THERM+ I
IT
mm
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
256
Screw
Length / No.
32 mm
35 mm
35 mm
35 mm
38 mm
38 mm
40 mm
40 mm
42 mm
42 mm
42 mm
–
45 mm
45 mm
48 mm
48 mm
50 mm
50 mm
52 mm
52 mm
52 mm
2016
012110
012111
012111
012111
012112
012112
012113
012113
012114
012114
012114
–
012115
012115
012116
012116
012117
012117
012118
012118
012118
Assembly
angle for
50 mm
167616
167617
167618
167619
167620
167621
167622
167623
167624
167625
167626
–
167628
167629
167630
167631
167632
167633
167634
167635
167636
Assembly
angle for
56 mm
167666
167667
167668
167669
167670
167671
167672
167673
167674
167675
167676
–
167678
167679
167680
167681
167682
167683
167684
167685
167686
EPDM
compensation
gasket
without without
–
–
2 mm 227010
3 mm 227032
4 mm 227015
5 mm 227032
6 mm 227020
7 mm 227032
8 mm 227025
9 mm 227032
10 mm 227030
–
–
2 mm 227010
3 mm 227032
4 mm 227015
5 mm 227032
6 mm 227020
7 mm 227032
8 mm 227025
9 mm 227032
10 mm 227030
KH-0010
Synthetic
compensation
profile
without without
–
–
without without
without without
without without
without without
without without
without without
without without
without without
without without
–
–
10 mm 227006
10 mm 227006
10 mm 227006
10 mm 227006
10 mm 227006
10 mm 227006
10 mm 227006
10 mm 227006
10 mm 227006
Dim. y
No. 207670
Profile
width
mm
THERM+ H-I
Accessories
Timber curtain wall 50/56 mm
Suction disc
Mullion section with silicone joint
■ Technical information
– Only insulated glass with UV resistance edge
seal or optional with enameling/screen printing
may be used.
– The necessary infill thicknesses have to be
coordinated with the glass supplier.
THERM+ H-I
Assembly options
– The legal glazing instructions have to be
taken into consideration and if necessary an
approval in individual cases has to be obtained.
– The suction discs can be also used as a
mechanical saving in combination with
the SG2 system for all heights larger than
8 m (min. infill thickness 32 mm).
– From an infill thickness of 23 mm possible
with insulating blocks SG.
– Selection of screws see screw selection tables.
– Please consider DIN EN 18008, TRLV and
TRPV.
- 64 mm
20to
907216
Suction disc set 75
No. 163807
Suction disc set 56/90
No. 163812
Suction disc set 50/90
No. 163810
HI-0191
2016
257
THERM+ H-I
Accessories
Timber curtain wall 50/56/76 mm
Belay sheet
Protection of vertical cover profile to prevent slipping
■ Technical information
– Rotate drilling jig for pre-drilling the belay sheet
180° for pre-drilling the belay sheet.
No.
Art.-Nr.
127100
127100
258
2016
No.
Art.-Nr.
902511
902511
ZH-0020
THERM+ H-I
Accessories
Timber curtain wall 50/56/76 mm
Static table
Vertical glazing
– The shown list is only for pre-dimensioning of
necessary cross sections for mullion and
transom within the glass construction. This is
no compensation for necessary tension and
stabilty certification.
– Please account for the factors by using
other E-modules for the mullion material:
–Timber-E-Module 5500:
Conversion factor E-Module 2
Timber-E-Module 12000:
Conversion factor E-Module 0.92
Timber-E-Module 13000:
Conversion factor E-Module 0.85
Timber-E-Modul 14000:
Conversion factor E-Module 0.79
– The following parameters are used
for the determination of the table:
wind load referred to DIN EN 1991-1-4:
0 m to 8 m
assembly height 0.5 KN/m²
> 8 m to 20 m
assembly height 0.8 KN/m²
(conversion factor 1.6)
> 20 m to 100 m
assembly height 1.1 KN/m²
(conversion factor 2.2)
Pressure cp: 0.8
Load increasing for singular items: 25 %
max. deflection referred to. DIN EN 13830:
- I/200, when L ≤ 3000 mm
- L/300 + 5 mm, when 3000 mm < L < 7500 mm
– The listed parameters are based on 1-fieldbearing. For 2-fields-bearing the deflections
and the necessary torque of inertia will be
reduced by a factor of 0.42. For 2-fieldsbearing a tension certification is always
mandatory.
Possible deviating max. deflections of the
glass manufacturer’s technical specifications
have to be respected. Balustrade loads are
not taken into consideration.
– T133 = 1-field-bearing
– T134 = 2-fields-bearing
Influencing parameter e [m]
0.50 0.75 1.00 1.25 1.50 1.75 2.00 2.25 2.50 2.75 3.00
6.00 1534 2301 3068 3835 4602 5369 6136 6903 7670 8438 9205
5.90 1454 2181 2907 3634 4361 5088 5815 6542 7269 7996 8722
5.80 1376 2064 2752 3441 4129 4817 5505 6193 6881 7569 8257
5.70 1302 1952 2603 3254 3905 4556 5206 5857 6508 7159 7810
5.60 1230 1845 2459 3074 3689 4304 4919 5534 6149 6763 7378
5.50 1161 1741 2321 2901 3482 4062 4642 5222 5803 6383 6963
5.40 1094 1641 2188 2735 3282 3829 4376 4923 5470 6017 6564
5.30 1030 1545 2060 2575 3090 3606 4121 4636 5151 5666 6181
5.20
969 1453 1938 2422 2906 3391 3875 4360 4844 5329 5813
5.10
910 1365 1820 2275 2730 3185 3640 4095 4550 5005 5460
5.00
854 1280 1707 2134 2561 2988 3415 3841 4268 4695 5122
4.90
800 1200 1599 1999 2399 2799 3199 3599 3998 4398 4798
4.80
748
4.70
699 1048 1397 1747 2096 2446 2795 3144 3494 3843 4192
4.60
652
977 1303 1629 1955 2281 2607 2932 3258 3584 3910
4.50
607
910 1213 1517 1820 2124 2427 2730 3034 3337 3640
4.40
564
846
4.30
523
785 1047 1308 1570 1832 2093 2355 2617 2878 3140
4.20
485
727
969 1212 1454 1696 1939 2181 2423 2666 2908
4.10
448
672
896
4.00
413
620
826 1033 1240 1446 1653 1860 2066 2273 2479
3.90
380
571
761
951
3.80
349
524
699
873 1048 1222 1397 1572 1746 1921 2096
3.70
320
480
640
800
960
3.60
292
439
585
731
877 1023 1170 1316 1462 1608 1754
3.50
266
400
533
666
799
933 1066 1199 1332 1465 1599
3.40
242
363
484
605
726
847
968 1090 1211 1332 1453
3.30
219
329
439
548
658
768
877
987 1097 1206 1316
3.20
198
297
396
495
594
693
792
891
990 1089 1188
3.10
178
267
356
446
535
624
713
802
891
980 1069
3.00
160
240
320
400
479
559
639
719
799
879
959
2.75
123
185
246
308
369
431
492
554
615
677
739
2.50 92.5
139
185
231
277
324
370
416
462
509
555
2.25 67.4
101
135
169
202
236
270
303
337
371
404
2.00 47.3 71.0 94.7
118
142
166
189
213
237
260
284
1.75 31.7 47.6 63.4 79.3 95.2
111
127
143
159
174
190
1.50 20.0 30.0 40.0 49.9 59.9 69.9 79.9 89.9 99.9
110
120
1122 1496 1870 2244 2618 2992 3366 3740 4114 4488
1128 1410 1692 1974 2256 2538 2820 3102 3384
1120 1344 1568 1792 2016 2240 2464 2688
1141 1331 1521 1712 1902 2092 2282
1120 1280 1440 1600 1760 1920
1.25
11.6
17.3 23.1 28.9 34.7 40.5 46.2 52.0 57.8 63.6 69.4
1.00
5.9
8.9
11.8
14.8 17.8 20.7 23.7 26.6 29.6 32.6 35.5
Caluclation example:
Influencing parameter B:
Height of mullion L:
1.25 m
2.5 m
Solution for assembly heights 0 m to 8 m:
Ix mullion = 231 cm4 (see list)
Solution for assembly heights > 8 m to 20 m (conversion factor 1.6)
Ix mullion = 231 cm4 x 1.6 = 370 cm4
Solution for assembly heights > 20 m to 100 m and timber with E-Module 13000:
(Factor wind 2.2 and factor E-module 0.85)
Ix mullion = 231 cm4 x 2.2 x 0.85 = 432 cm4
KH-0601
2016
259
THERM+ H-I
Assembly options
Pre-dimensioning list:
Result Ix [cm4] at assembly height 0 m to 8 m,
E-Module 11000 N/mm² (BS 11/BS 14 glued-laminated timber)
Length of mullion L [m] / length of transom B [m]
■ Technical information
THERM+ H-I
Accessories
Timber curtain wall 50/56/76 mm
Static table
Statical and technical parameters
■ Technical information
– Caluclation example:
Determined necessary statical parameter
lx = 231 cm4.
– Used timber profile: 50 x 90 or 60 x 80 mm
List 1: Statical parameters lx
Mullion width (mm)
Mullion depth (mm)
50
60
70
80
90
100
50
52.08
62.50
72.92
83.33
93.75
104.17
60
90.00
108.00
126.00
144.00
162.00
180.00
70
142.92
171.50
200.08
228.67
257.25
285.83
80
213.33
256.00
298.67
341.33
384.00
426.67
90
303.75
364.50
425.25
486.00
546.75
607.50
100
416.67
500.00
583.33
666.67
750.00
833.33
120
720.00
864.00
1008.00
1152.00
1296.00
1440.00
140
1143.33
1372.00
1600.67
1829.33
2058.00
2286.67
160
1706.67
2048.00
2389.33
2730.67
3072.00
3413.33
180
2430.00
2916.00
3402.00
3888.00
4374.00
4860.00
200
3333.33
4000.00
4666.67
5333.33
6000.00
6666.67
220
4436.67
5324.00
6211.33
7098.67
7986.00
8873.33
240
5760.00
6912.00
8064.00
9216.00
10368.00 11520.00
260
7323.33
8788.00
10252.67 11717.33 13182.00 14646.67
280
9146.67
10976.00 12805.33 14634.67 16464.00 18293.33
300
11250.00 13500.00 15750.00 18000.00 20250.00
Result Ix [cm4]
List 2: Statical parameters ly
Mullion width (mm)
Mullion depth (mm)
50
60
70
80
100
50
52.08
90.00
142.92
213.33
303.75
416.67
60
62.50
108.00
171.50
256.00
364.50
500.00
70
72.92
126.00
200.08
298.67
425.25
583.33
80
83.33
144.00
228.67
341.33
486.00
666.67
90
93.75
162.00
257.25
384.00
546.75
750.00
100
104.17
180.00
285.83
426.67
607.50
833.33
120
125.00
216.00
343.00
512.00
729.00
1000.00
140
145.83
252.00
400.17
597.33
850.50
1166.67
160
166.67
288.00
457.33
682.67
972.00
1333.33
180
187.50
324.00
514.50
768.00
1093.50
1500.00
200
208.33
360.00
571.67
853.33
1215.00
1666.67
220
229.17
396.00
628.83
938.67
1336.50
1833.33
240
250.00
432.00
686.00
1024.00
1458.00
2000.00
260
270.83
468.00
743.17
1109.33
1579.50
2166.67
280
291.67
504.00
800.33
1194.67
1701.00
2333.33
300
312.50
540.00
857.50
1280.00
1822.50
2500.00
Result Iy [cm4]
260
90
2016
+ H-V
THERM
Content
System benefits
System benefits
Technology in detail
Tests
Variants
TC timber connector
Ventilation
Sealing system
263
265
266
268
270
274
System width 50 mm
System width 56 mm
System width 76 mm
Building connections 50/56/76 mm
275
299
323
337
2016
261
THERM+ H-V
System sections
System sections
262
2016
THERM+ H-V
System benefits
Timber curtain wall 50/56/76 mm
Technology in detail
■ Excellent product properties
– System widths 50, 56 and 76 mm.
– Infill thickness from 6 to 64 mm.
– Maximal energy saving by variable thermal insulation with
insulating block options up to Uf= 0.80 W/(m²K) including
screw influence.
– All profiles can be used as well for mullions as for transoms.
■ Optimum planning
– Glass load transmission for very high glass weights up to 600 kg.
– Vertical curtain walls.
– Construction as polygon curtain wall up to 45° with system
accessories.
– No components lasting from the outside to the timber construction.
– Extensive system accessories.
■ Efficient installation
– Two types of aluminium base profiles for screw connection: With
or without positioning foot in the area of the timber structural profile.
– Solid timber connector technology in the options SOLO and
KOMBI, tested according to The European Technical Approval
(ETA).
– Integrated drainage at the continuous gasket in three levels.
– Safe fixation of all construction elements in the continuous
aluminium screw channel.
– Easy and quick screwing of base profiles also with magazine
screw driver possible.
THERM+ Timber H-V
with insulating block P 19
SHV-0001
2016
263
THERM+ H-V
System sections
– Entire imposed load and load transmission tested.
THERM+ H-V
System benefits
Timber curtain wall 50/56/76 mm
Technology in detail
■ Pressure and cover profiles
for curtain wall and roof light
applications
– Wide selection of various types as well as
system widths.
– Individual solutions for objects in a short time
available.
– Visually especially attractive flat pressure
profile with an offset of only 4 mm above
the glass surface.
– Ideal cross point sealing by special
accessories.
– Timber cover profiles to clip available.
■ Base profiles
– Suitable for all system variations.
– Improved screw channel for optimum thermal
break.
– Specific gasket holding fixture for easy fixing
of the silicon-free EPDM gasket.
– Slottet holes for integrated expansion
compensation.
– With or without foot.
■ Connector system for timber curtain wall
– Highly efficient and time-saving.
– All machining is in transoms.
– Few special screws required for maximum
load-bearing capacity.
– Stable connection for high glass loads.
– Extremely fast construction site assembly:
Push in transoms and screw together.
– Transoms can be dismantled at any time.
– No adjustment needed thanks to the
automatically flush stop.
– Tested at infill thicknesses of up to 64 mm.
– Seven installation depths for transom depths
from 60 to 300 mm.
– Tested according to ETA-13/0765.
264
2016
THERM+ H-V
System benefits
Timber curtain wall 50/56/76 mm
THERM+ – Certified quality, CE-conform and tested
THERM+ – Quality you can rely upon.
Extensive product tests with excellent results confirm the high quality in practical applications of the THERM+ curtain wall system.
No.
Test type/Standard
Classification/Result
Testing institute/Test no.
4.1
Wind resistance (EN 13116)
Permissible load 2.5 KN/m2
Increased load 3.75 KN/m2
ift Rosenheim
No. 10838884
4.3
Resistance against impact
(if specially requested) (EN 14019)
Interior I5
Exterior E5
ift Rosenheim
No. 10838884
4.4
Air permeability
(EN 12152)
AE (>600)
ift Rosenheim
No. 10838884
4.5
Water penetration
(EN 12154)
RE 2100
ift Rosenheim
No. 10838884
4.7
Thermal transmittance (UCW-value)
(EN 13947)
Calculation with data from RAICO
Uf-value tables
EN 13947 (calculation)
■ Notice
– All features can be used for CE-Labelling by the manufactures of curtain walls. It is mandatory that only RAICO products has to
be used and the production process has to be monitored by an in-house production control system. The whole production process
has to be compliant to the RAICO assembly instructions.
– Depending on the panel dimensions of the curtain wall and the structural connections the sound insulation value has to be
calculated separately. The system testimonial can only be used for an overview.
– Depending on the different systems options and the glass thickness the Uf-value can be adapted step-by-step. The exacts values
based on DIN EN ISO 10077-2 are documented in the thermal protection documentations by RAICO.
■ Additional approvals and certifications
Test
Result
Description
Testing institute/test no.
German general approval:
clamping joint for the curtain
wall system
– Fixing of base profile
– Screw channel of mullion-transom
profiles
– Pressure profiles
– Screws
German general approval
for thefixing system THERM+ H-I
timber curtain wall
DIBt, Berlin
No. Z-14.4-516
European Technical Approval for
timber mullion-transom connection
system THERM+
Test THERM+ H-V
ETA-Denmark
No. ETA-13/0765
European Technical Approval: Connector types with characteristic
SOLO/KOMBI timber mullion resistance
& transom connectors
Burglar prevention
Resistance class WK2 for system
widhts 50, 56 and 76 mm
according to DIN ENV 1627 ff.
ift Rosenheim
No. 25534211
Test THERM+ H-V
according to DIN EN 1627 ff.
ift Rosenheim
No. 25534211
Burglar prevention
Resistance class WK3 for system
widhts 50, 56 and 76 mm
Fall protection
Criteria of DIN 18008-4
Criteria fulfilled
(technical rules for fall proof glazing)
fulfilled
Passive house curtain wall
Ucw ≤ 0.8 W/m2K
of system THERM+ H-V 50, 56, 76
with insulating block P
Fulfilment all criteria for
components suitable for passive
houses
passive house institute
Dr. Feist certificate
2016
265
THERM+ H-V
System sections
■ Product standard for curtain walling EN 13830:
Features and classification for the CE-Labelling.
THERM+ H-V
System benefits
Timber curtain wall 50/56/76 mm
Curtain wall options/drainage system
■ Structural Glazing SG2
– System widths 50 or 56 mm.
– Glazing system for optical exclusive
SG curtain wall.
– Maximum thermal insulation by special
insulating block SG.
– Simple and economic processing.
– Without visible physcial protections up to
an assembly height of 8 m.
■ Burglar proof curtain wall
WK2/WK3
– System widths 50, 56 and 76 mm.
– Resistance class WK2 and WK3 permitted.
– Simple processing.
– Identical technology to the basic system.
■ Drainage system
– The drainage groove of the mullion and
transom gasket is arranged in various levels.
– In all THERM+ systems the ventilation and
drainage principle is so designed that a
controlled condensate removal from
transom to the mullion rebate is secured
via interior gaskets.
266
2016
H-VSG-0001, HVWK-0001, SHV-0002
THERM+ H-V
System benefits
Timber curtain wall 50/56/76 mm
Gasket options
■ Exterior gasket
– Various exterior gaskets and insulating block
options available.
Standard exterior gasket
– Gradual adaptation of the insulation value.
– Maximum thermal insulation up to
Uf= 0.80 W/(m²K) including screw influence.
Insulating block 9
– Certified passive house curtain wall.
– Economic solution.
Insulating block 21
THERM+ H-V
System sections
Insulating block P
■ Transom and mullion gaskets
– Optimised shape for maximum thermal
insulation and efficient fabrication.
– Complete covering and sealing of the base
prof ile.
Mullion gasket
Transom gasket
– Perfect and easy fitting on the structural profile
(without silicone).
– Two options of gaskets with flaps for transom
and base drainage as well as draining within
the continuous gasket at the structural
connections.
Base transom gasket, flap
Gasket for transom, flap
Polygon gasket
Mullion gasket
Compensation of
infill thickness
– Reliable drainage in two or three levels
by simply notching.
– Special accessories for all applications,
e. g. transom and mullion sealing elements.
Expansion mullion gasket
2016
267
THERM+ H-V
System benefits
Timber curtain wall 50/56/76 mm
Timber-connector-options
■ SOLO
– Tensioned with nail screws.
– Safe and tested dispersal of glass weights.
– Inserted invisibly between mullion and transom.
– Tested according to ETA-13/0765.
– Safe dispersal of the glass loads and resulting
torsion forces via the timber structure.
– Seven installation depths for transom depths from
60 to 300 mm.
– Installation in a few simple steps and minimum
processing.
– Integrated longitudinal stop and transom contact pressure over the entire depth for a perfect T-connection.
■ KOMBI
– Tensioned with nail screws through the transom
base profile.
– Safe and tested dispersal of glass weights.
– Inserted invisibly between mullion and transom.
– Tested according to ETA-13/0765.
– Safe dispersal of the glass loads and resulting
torsion forces via the timber structure.
– Seven installation depths for transom depths from
60 to 300 mm.
– Installation in a few simple steps and minimum
processing.
– Integrated longitudinal stop and transom contact pressure over the entire depth for a perfect T-connection.
■ Super-simple installation
– Highly efficient and time-saving.
– All machining is in transoms.
– Few special screws required for maximum
load-bearing capacity.
– Stable connection for high glass loads.
– Extremely fast construction site assembly:
Push in transoms and screw together.
– Transoms can be dismantled at any time.
– No adjustment needed thanks to the
automatically flush stop.
268
2016
THERM+ H-V
System benefits
Timber curtain wall 50/56/76 mm
Timber-connector-options
■ High loading capacity on european standard
The new timber connector is tested according to the current guideline ETAG 015 and certified with the european technical approval
ETA-13/0765. In comparison to the previous timber connector now the infill thickness of 64 mm is tested and also part of the aforementioned approval. Due to detail improvements the new timber connector which is available in the versions SOLO and KOMBI
characterises a much more rational and technical superior assembly.
– Static calculation possible on the base of the Eurocodes.
– The denoted loads of the connector are based on a minimum apparent density of 350 kg/m³, with the use of timber or derived
timber products with a higher apparent density the loads can be increase up to an apparent density of 500 kg/m³.
Admissible loads in consideration of the apparent density TC SOLO
350 kg/m3
400 kg/m3
450 kg/m3
500 kg/m3
Maximum glass load* per transom in kg
Type of connector
TC 60 SOLO
380 kg/m3
*it is imperative to respect the ETA-13/0765
116
119
120
124
126
TC 80 SOLO
138
141
143
147
151
TC 100 SOLO
162
167
170
176
182
TC 120 SOLO
182
188
191
198
205
TC 160 SOLO
218
225
229
239
248
TC 200 SOLO
250
258
263
274
286
TC 240 SOLO
276
285
291
305
317
450 kg/m3
500 kg/m3
THERM+ H-V
System sections
Apparent density
Admissible loads in consideration of the apparent density TC KOMBI
Apparent density
350 kg/m3
380 kg/m3
400 kg/m3
Maximum glass load* per transom in kg
Type of connector
*it is imperative to respect the ETA-13/0765
TC 60 KOMBI
253
256
257
260
263
TC 80 KOMBI
274
278
279
284
288
387
TC 100 KOMBI
367
372
375
381
TC 120 KOMBI
388
393
396
403
410
TC 160 KOMBI
423
430
434
444
453
TC 200 KOMBI
455
463
468
480
491
TC 240 KOMBI
481
490
496
510
523
KHV-0620
2016
269
THERM+ H-V
System benefits
Timber curtain wall 50/56/76 mm
Isothermal lines
Especially for aluminium curtain walls and
conservatories it is essential for long term
function and maximum satisfaction of the clients
to offer a well-performing thermal insulation
and an optimized isothermal line. Only high
quality systems which correspond to both
requirements can avoid the formation of
condensate.
■ Isothermal lines
– Double glazing with Ug=1.1 W/(m2K) and
acrylic spacer.
– Already with standard exterior gaskets the
10°C- isothermal line remains completely
within the system.
– Condensate is avoided efficiently.
– Individual adaption at higher risk of condensation is possible (e. g. conservatories and
swimming pools).
■ Formation of condensate
– The humidity in the room can no longer be
absorbed by the air.
– The humidity builds up drops on building
compoments with low surface temperatures.
– Movement of the drop formation of insulating
glass towards the area of the spacer an the
frame of the curtain wall system.
THERM+ 50 H-V
with acrylic spacer
Due to the outstanding thermal insulation already with standard gaskets as well as the insulating effect of acrylic spacers the isothermal line
does not touch the surface of the structure.
– Appearing of condensate at standardized
conditions of 50% humidity and 20°C
temperature on surfaces with a temperaure
of 10°C.
■ Influence of the curtain wall system
– The surface temperature on the inside of the
curtain wall system does not decrease below
10°C even when the exterior temperature is
10°C below zero.
– 10°C-isothermal line of the THERM+ system
remains completely within the system and
condensate is efficiently avoided.
■ Influence of the glass spacer
– Besides the thermal insulation of the curtain
wall system the type of spacer and glass edge
is another important factor.
– The spacer which is a thermal bridge transfers
temperatures deep into the frame of the curtain
wall system.
– Use of glass spacers which offer a maximum
thermal insulation (e. g. acrylic or steel).
270
2016
THERM+ 50 H-V
with aluminium spacer
Here the isothermal line is less advantageous
due to the influence of the aluminium spacer.
THERM+ H-V
System benefits
Timber curtain wall 50/56/76 mm
Ventilation options
Option I a: Pressure compensation via mullion – connection below/on top
THERM+ H-V
System sections
The ventilation and the condensate removal of the
glazing rebate is effected via the four corners of
every infill unit in the mullion profiles and across an
on-site adapter constructions.
■ Technical information
– T44 = Foil connection behind
drainage level
– T45 = Collateral pressure
compensation
– T48 = Ventilation
– T49 = Ventilation
– T138 = Maximum 8 m resp.
maximum 8 panels
– T139 = All other 8 m resp. 8 panels
KHV-0100
2016
271
THERM+ H-V
System benefits
Timber curtain wall 50/56 mm
Ventilation options
Option I b: Pressure compensation via mullion and synthetic sealing piece
The ventilation and the condensate removal of the
glazing rebate is effected via the four corners of
every infill unit in the mullion profiles and addtional
with a sealing piece via an opening of pressure
profiles in the mullion area.
Synthetic sealing piece:
System widths 50 mm:
No. 167142 PU = 10 pieces
System widths 56 mm:
No. 167147 PU = 10 pieces
■ Technical information
– T44 = Foil connection behind
drainage level.
– T45 = Collateral pressure
compensation.
– T48 = Ventilation.
– T49 = Ventilation.
– T138 = Maximum 8 m resp.
maximum 8 panels.
– T139 = All other 8 m resp.
8 panels.
272
2016
KHV-0102
THERM+ H-V
System benefits
Timber curtain wall 50/56/76 mm
Ventilation options
Option II: Pressure compensation of extra large transoms via pressure and cover profiles
THERM+ H-V
System sections
An additional opening result from a transom
width of 1200 mm, two additional openings
result from a transom width of 1800 mm in the
pressure and cover profiles (options II a and II b).
The number of openings depends on the transom
length, the individual project and glazing requirements and must be determined in accordance with
the glass supplier.
to
■ Technical information
– T121 = Option II a.
– T122 = Option II b.
KH-0101
2016
273
THERM+ H-V
System benefits
Timber curtain wall 50/56/76 mm
Interior gasket design
3 drainage levels
■ Technical information
– T38 = Level 2.
– T39 = Level 3.
– T40 = Level 1.
– T151 = Interior gasket E3.
– T152 = Interior gasket E2.
– T153 = Interior gasket E1.
– T159 = Interior gasket E2 with flap.
274
2016
KV-0011
THERM+ H-V
System sections 50 mm
Timber curtain wall
Certified passive house curtain wall with insulating block P 50/39
Mullion section/transom section
■ Technical information
■ Profiles
– Certified by passive house institute Dr. Feist.
Article
No.
PU
– Uf -values see chapter Thermal insulation.
Cover profile 50/15
013003
6m
Cover profile 50/12
013004
6m
118005
6m
144005
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
Gasket for mullion 50 V
153005
40 m
Gasket for transom 50 V
153010
40 m
Insulating block P 50/39
168514
50 m
No.
PU
– T1 = Depths from 50 mm.
Pressure profile 47 punched
Base profile 41 V punched
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
■ Accessories
Article
Special countersunk
sheet metal screw 5.5x20
Pan head tapping screw
5.5x60
Sealing piece
for pressure profile 50
Crosspoint sealing plate
50
Sealing piece
for transom 50 V
012122
012123
100
pc(s)
100
pc(s)
014035
10 pc(s)
016050
10 pc(s)
152012
100
pc(s)
Glass carrier 44 to 45 V
162087
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
012122
HV-0082
2016
275
THERM+ H-V
System sections
■ Gaskets
THERM+ H-V
System sections 50 mm
Timber curtain wall
Certified passive house curtain wall, insulating block P 50/39, base profile for groove installation
Mullion section/transom section
■ Technical information
■ Profiles
– Certified by passive house institute Dr. Feist.
Article
No.
PU
– Uf -values see chapter Thermal insulation.
Cover profile 50/15
013003
6m
Cover profile 50/12
013004
6m
118005
6m
144020
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
Gasket for mullion 50 V
153005
40 m
Gasket for transom 50 V
153010
40 m
Insulating block P 50/39
168514
50 m
No.
PU
– T1 = Depths from 50 mm.
Pressure profile 47
punched
Base profile 41 V with
foot punched
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
■ Accessories
Article
Special countersunk
sheet metal screw 5.5x20
Pan head tapping screw
5.5x60
Sealing piece
for pressure profile 50
Crosspoint sealing plate
50
Sealing piece
for transom 50 V
276
2016
HV-0144
012122
012123
100
pc(s)
100
pc(s)
014035
10 pc(s)
016050
10 pc(s)
152012
100
pc(s)
Glass carrier 44 to 45 V
162087
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
THERM+ H-V
System sections 50 mm
Timber curtain wall
Insulating block P 50/19
Mullion section/transom section
■ Technical information
■ Profiles
– The type of insulating block P depends on the infill
thickness:
- 22 to 27 mm: insulating block P 50/19, no. 168509
- 28 to 41 mm: insulating block P 50/25, no. 168510
- 42 to 64 mm: insulating block P 50/39, no. 168514.
Article
No.
PU
Cover profile 50/15
013003
6m
Cover profile 50/12
013004
6m
118005
6m
144005
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
Gasket for mullion 50 V
153005
40 m
Gasket for transom 50 V
153010
40 m
Insulating block P 50/19
168509
50 m
No.
PU
Pressure profile 47
punched
Base profile 41 V
punched
– Uf-values see chapter Thermal insulation.
– T1 = Depths from 50 mm.
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
22
■ Accessories
Article
Pan head tapping screw
5.5x42
Special countersunk
sheet metal screw 5.5x20
Sealing piece
for pressure profile 50
Crosspoint sealing plate
50
Sealing piece
for transom 50 V
22
HV-0081
012114
012122
100
pc(s)
100
pc(s)
014035
10 pc(s)
016050
10 pc(s)
152012
100
pc(s)
Glass carrier 26 to 27 V
162042
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
2016
277
THERM+ H-V
System sections
■ Gaskets
THERM+ H-V
System sections 50 mm
Timber curtain wall
Insulating block 21
Mullion section/transom section
■ Technical information
■ Profiles
– Uf -values see chapter Thermal insulation.
Article
– T1 = Depths from 50 mm.
No.
PU
Cover profile 50/15
013003
6m
Cover profile 50/12
013004
6m
118005
6m
144005
6m
No.
PU
Insulating block 50/21
150605
50 m
Gasket for mullion 50 V
153005
40 m
Gasket for transom 50 V
153010
40 m
Pressure profile 47
punched
Base profile 41 V
punched
■ Gaskets
Article
■ Accessories
Article
Pan head tapping screw
5.5x42
Special countersunk
sheet metal screw 5.5x20
Sealing piece
for pressure profile 50
Crosspoint sealing plate
50
Sealing piece
for transom 50 V
278
2016
HV-0030
No.
012114
012122
PU
100
pc(s)
100
pc(s)
014035
10 pc(s)
016050
10 pc(s)
152012
100
pc(s)
Glass carrier 26 to 27 V
162042
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
THERM+ H-V
System sections 50 mm
Timber curtain wall
Insulating block 9
Mullion section/transom section
■ Technical information
■ Profiles
– Uf -values see chapter Thermal insulation.
Article
– T1 = Depths from 50 mm.
No.
PU
Cover profile 50/15
013003
6m
Cover profile 50/12
013004
6m
118005
6m
144005
6m
No.
PU
Pressure profile 47
punched
Base profile 41 V
punched
Article
Insulating block 50/9
151010
50 m
Gasket for mullion 50 V
153005
40 m
Gasket for transom 50 V
153010
40 m
■ Accessories
Article
Pan head tapping screw
5.5x42
Special countersunk
sheet metal screw 5.5x20
Sealing piece
for pressure profile 50
Crosspoint sealing plate
50
Sealing piece
for transom 50 V
HV-0008
No.
012114
012122
PU
100
pc(s)
100
pc(s)
014035
10 pc(s)
016050
10 pc(s)
152012
100
pc(s)
Glass carrier 26 to 27 V
162042
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
2016
279
THERM+ H-V
System sections
■ Gaskets
THERM+ H-V
System sections 50 mm
Timber curtain wall
Standard exterior gasket
Mullion section/transom section
■ Technical information
■ Profiles
– Uf -values see chapter Thermal insulation.
Article
– T1 = Depths from 50 mm.
No.
PU
Cover profile 50/15
013003
6m
Cover profile 50/12
013004
6m
118005
6m
144005
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
Gasket for mullion 50 V
153005
40 m
Gasket for transom 50 V
153010
40 m
Pressure profile 47
punched
Base profile 41 V
punched
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
■ Accessories
Article
Pan head tapping screw
5.5x42
Special countersunk
sheet metal screw 5.5x20
Sealing piece
for pressure profile 50
Crosspoint sealing plate
50
Sealing piece
for transom 50 V
280
2016
HV-0001
No.
012114
012122
PU
100
pc(s)
100
pc(s)
014035
10 pc(s)
016050
10 pc(s)
152012
100
pc(s)
Glass carrier 26 to 27 V
162042
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
THERM+ H-V
System sections 50 mm
90°
Timber curtain wall
Corner mullion 90°, vertical
Mullion section/transom section
■ Profiles
Article
No.
PU
013003
6m
118005
6m
144005
6m
168023
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
Gasket for mullion 50 V
153005
40 m
Compensation gasket 2
227010
100 m
Cover profile 50/15
Pressure profile 47
punched
Base profile 41 V
punched
Connection profile 39/22 V
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
■ Accessories
Article
Pan head tapping screw
5.5x42
Special timber screw
4.5x35
Special countersunk
sheet metal screw 4.8x19
HV-0164
No.
012114
908020
908118
2016
PU
100
pc(s)
100
pc(s)
100
pc(s)
281
THERM+ H-V
System sections
■ Gaskets
THERM+ H-V
System sections 50 mm
90°
Timber curtain wall
Corner mullion 90°, vertical
Mullion section/transom section
■ Profiles
Article
No.
PU
013003
6m
118005
6m
144005
6m
168023
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
Gasket for mullion 50 V
153005
40 m
Compensation gasket 2
227010
100 m
Cover profile 50/15
Pressure profile 47
punched
Base profile 41 V
punched
Connection profile 39/22 V
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
■ Accessories
Article
Pan head tapping screw
5.5x42
Special timber screw
4.5x35
Special countersunk
sheet metal screw 4.8x19
282
2016
HV-0163
No.
012114
908020
908118
PU
100
pc(s)
100
pc(s)
100
pc(s)
THERM+ H-V
System sections 50 mm
Timber curtain wall
Corner mullion for variable angles, vertical
Mullion section/transom section
■ Profiles
Article
No.
PU
Cover profile 50/15
013003
6m
Pressure prof. 47 punched
118005
6m
Base profile 41 V punched
144005
6m
Connection profile 39/22 V
168023
6m
■ Gaskets
No.
PU
Gasket for pressure prof. 3 011070.LI
100 m
Gasket for pressure prof. 3 011070.RE
100 m
Gasket for mullion 50 V
153005
40 m
Compensation gasket 2
227010
100 m
■ Accessories
Article
Pan head tapping screw
5.5x42
Special timber screw
4.5x35
Special countersunk
sheet metal screw 4.8x19
HV-0165
No.
012114
908020
908118
2016
PU
100
pc(s)
100
pc(s)
100
pc(s)
283
THERM+ H-V
System sections
Article
THERM+ H-V
System sections 50 mm
Timber curtain wall
Gasket for transom with flap between mullions
Transom section
■ Technical information
■ Profiles
– Available for all insulating blocks.
Article
– T1 = Depths from 50 mm.
Cover profile 50/12
Pressure profile 47
punched
Base profile 41 V
punched
No.
PU
013004
6m
118005
6m
144005
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
153015
40 m
No.
PU
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
Gasket for transom 50 V
with flap
■ Accessories
Article
Pan head tapping screw
5.5x42
Special countersunk
sheet metal screw 5.5x20
Sealing piece
for pressure profile 50
Crosspoint sealing plate
50
Sealing piece
for transom 50 V
284
2016
HV-0002a
012114
012122
100
pc(s)
100
pc(s)
014035
10 pc(s)
016050
10 pc(s)
152012
100
pc(s)
Glass carrier 26 to 27 V
162042
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
THERM+ H-V
System sections 50 mm
Timber curtain wall
Continuous base gasket with flap
Transom section
■ Technical information
■ Profiles
– Available for all insulating blocks.
Article
– Base gasket available up to an infill thickness
of 64 mm.
Cover profile 50/12
No.
PU
013004
6m
118005
6m
144005
6m
168005
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
Compensation gasket 2
011080
100 m
Base gasket for transom
50 V with flap
153020
40 m
Pressure profile 47
punched
Base profile 41 V
punched
– T1 = Depths from 50 mm.
Connection profile 36/22
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
■ Accessories
Article
Pan head tapping screw
5.5x42
Special countersunk
sheet metal screw 5.5x20
Sealing piece
for pressure profile 50
Crosspoint sealing plate
50
Sealing piece
for base transom V
HV-0002b
No.
012114
012122
PU
100
pc(s)
100
pc(s)
014035
10 pc(s)
016050
10 pc(s)
152075
10 pc(s)
Glass carrier 26 to 27 V
162042
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
2016
285
THERM+ H-V
System sections
■ Gaskets
THERM+ H-V
System sections 50 mm
Timber curtain wall
Timber cover profile clipped
Mullion section/transom section
■ Technical information
■ Profiles
– Timber cover profiles are products complementary to
the RAICO system components, supplied by the fabricator.
It must be assured that the function of the glazing system
remains guaranteed by adaptation of the constructional
and material characteristics of the timber cover profile.
Article
Pressure profile 44
punched
Base profile 41 V
punched
– The norms and regulations concerning the use of timber
in exterior building areas must be respected.
No.
PU
118505
6m
144005
6m
■ Gaskets
– Timber cover profiles must be secured mechanically
after their installation.
Article
– For further information see Processing.
– T1 = Depths from 50 mm.
No.
PU
Gasket for pressure
profile 7 H
150510
100 m
Gasket for mullion 50 V
153005
40 m
Gasket for transom 50 V
153010
40 m
No.
PU
■ Accessories
Article
Pan head tapping screw
5.5x42
Special countersunk
sheet metal screw 5.5x20
Sealing piece
for pressure profile 50
Crosspoint sealing plate
50
Sealing piece
for transom 50 V
286
2016
HV-0107
012114
012122
100
pc(s)
100
pc(s)
014035
10 pc(s)
016050
10 pc(s)
152012
100
pc(s)
Glass carrier 26 to 27 V
162042
10 pc(s)
Cover profile fixation 80
167005
Special timber screw
4.5x35
908020
100
pc(s)
100
pc(s)
THERM+ H-V
System sections 50 mm
Timber curtain wall
Connection of ventilated/non-ventilated curtain wall
Transom section
■ Technical information
■ Profiles
– For the alternative solution (direct screw
connection) attention shall be paid to observing
a sufficient tolerance compensation
(see Processing).
Article
No.
PU
Cover profile 50/12
013004
6m
Pressure prof. 47 punched
118005
6m
Base profile 41 V punched
144005
6m
Connection profile 45/42
168060
6m
■ Gaskets
No.
Gasket for pressure prof. 3 011070.LI
PU
100 m
Gasket for pressure prof. 3 011070.RE
100 m
Gasket for pressure prof. 7
011074
100 m
Gasket for transom 50 V
with flap
153015
40 m
■ Accessories
Article
Pan head tapping screw
5.5x42
Special countersunk
sheet metal screw 5.5x20
Sealing piece
for pressure profile 50
Crosspoint sealing plate
50
Sealing piece
for transom 50 V
HV-0157
No.
012114
012122
PU
100
pc(s)
100
pc(s)
014035
10 pc(s)
016050
10 pc(s)
152012
100
pc(s)
Glass carrier 26 to 27 V
162042
10 pc(s)
Special timber screw
4.5x35
908020
Terminal clamp 47/22
915501
2016
100
pc(s)
100
pc(s)
287
THERM+ H-V
System sections
Article
THERM+ H-V
System sections 50 mm
Timber curtain wall
Interior compensation of varying infill thicknesses
Mullion section/transom section
■ Technical information
■ Profiles
– Possible compensation of infill thickness:
- 2 mm: compensation gasket 2, 154505
- 4 mm: compensation gasket 4, 154507
- 6 mm: compensation gasket 6, 154509.
Article
– T1 = Depths from 50 mm.
Pressure profile 47
punched
Base profile 41 V
punched
No.
PU
Cover profile 50/15
013003
6m
Cover profile 50/12
013004
6m
118005
6m
144005
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
Compensation gasket 4
154507
100 m
Gasket for mullion 50 V
158005
40 m
Gasket for transom 50 V
158010
40 m
No.
PU
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
■ Accessories
Article
Pan head tapping screw
5.5x42
Special countersunk
sheet metal screw 5.5x20
Sealing piece
for pressure profile 50
Crosspoint sealing plate
50
Sealing piece
for transom 50
288
2016
HV-0119
012114
012122
100
pc(s)
100
pc(s)
014035
10 pc(s)
016050
10 pc(s)
152040
100
pc(s)
Glass carrier 28 to 29 V
162047
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
THERM+ H-V
System sections 50 mm
Timber curtain wall
Single glazing
Mullion section/transom section
■ Technical information
■ Profiles
– Depending on the infill thickness the following gaskets
for pressure profile must be used:
- Infill thickness 8 to 9 mm: gaskets for pressure profile 5 mm
- Infill thickness from 10 mm: gaskets for pressure profile 3 mm.
– T1 = Depths from 50 mm.
Article
No.
PU
Cover profile 50/15
013003
6m
Cover profile 50/12
013004
6m
118005
6m
144005
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
Gasket for mullion 50 V
153005
40 m
Gasket for transom 50 V
153010
40 m
Pressure profile 47
punched
Base profile 41 V
punched
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
■ Accessories
Article
Pan head tapping screw
5.5x25
Special countersunk
sheet metal screw 5.5x20
Sealing piece
for pressure profile 50
Crosspoint sealing plate
50
Sealing piece
for transom 50 V
HV-0007
No.
012107
012122
PU
100
pc(s)
100
pc(s)
014035
10 pc(s)
016050
10 pc(s)
152012
100
pc(s)
Glass carrier 10 to 11 V
162002
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
2016
289
THERM+ H-V
System sections
■ Gaskets
THERM+ H-V
System sections 50 mm
Timber curtain wall
Expansion mullion
Mullion section
■ Technical information
■ Profiles
– T11 = Depths from 100 mm.
Article
Cover profile 50/15
No.
PU
013003
6m
Pressure profile 47
punched
Expansion base profile
41 V left punched
Expansion base profile
41 V right punched
118005
6m
144105
6m
144106
6m
Insertion profile 16/10 V
168220
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
153305
40 m
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
Gasket for mullion 50 H V
■ Accessories
Article
Pan head tapping screw
5.5x42
Pan Head timber screw
4.5x20
PU sealing strip 10/7
offset arrangement
290
2016
HV-0117
No.
012114
907550
951990
PU
100
pc(s)
100
pc(s)
10 m
THERM+ H-V
System sections 50 mm
Timber curtain wall
Polygon glazing system with standard interior gasket 1° to 7°
Mullion section exterior angle/interior angle
■ Technical information
■ Profiles
– With exterior gasket for pressure profile 5 mm
and standard interior gasket to max. 7°.
Article
Cover profile 50/15
Pressure profile 47
punched
Base profile 41 V
punched
No.
PU
013003
6m
118005
6m
144005
6m
■ Gaskets
Article
No.
PU
Gasket for pressure
profile 5
011073
100 m
Gasket for mullion 50 V
153005
40 m
No.
PU
Article
Pan head tapping screw
5.5x45
Special timber screw
4.5x35
HV-0027
012115
908020
2016
100
pc(s)
100
pc(s)
291
THERM+ H-V
System sections
■ Accessories
THERM+ H-V
System sections 50 mm
Timber curtain wall
Polygon glazing system 8° to 15°
Mullion section exterior angle
■ Technical information
■ Profiles
– Face width of cover profile depends on angle
and infill thickness.
Article
Cover profile 56/15
– Glass bite (A and B) must be min. 12 mm.
The distance between glass edge and gasket
cap (C) has to be min. 3 mm. Please note the
glass tolerances!
Pressure profile 53
punched
Base profile 41 V
punched
No.
PU
013023
6m
118010
6m
144005
6m
No.
PU
011810
100 m
153040
40 m
■ Gaskets
Article
Gasket for pressure
profile 8° to 15°
Gasket for transom 50 V
polygonal 8° to 20°
■ Accessories
Article
Pan head tapping screw
5.5x45
Special timber screw
4.5x35
292
2016
HV-0044
No.
012115
908020
PU
100
pc(s)
100
pc(s)
THERM+ H-V
System sections 50 mm
Timber curtain wall
Polygon glazing system 8° to 20° and 21° to 33° with polygon interior and exterior gasket
Mullion section exterior angle
■ Technical information
■ Profiles
– Insulating strips available on demand.
Article
Cover profile 50/15
Profile polygonal
8° to 20°
Profile polygonal
21° to 33°
Pressure profile 47
punched
Base profile 41 V
punched
No.
PU
013003
6m
013800
6m
013801
6m
118005
6m
144005
6m
No.
PU
011805
100 m
153040
40 m
153045
40 m
Article
Gasket for pressure
profile 5 polygonal
Gasket for transom 50 V
polygonal 8° to 20°
Gasket for mullion 50 V
polygonal 21° to 33°
■ Accessories
Article
Pan head tapping screw
5.5x50
Pan head tapping screw
5.5x52
Special timber screw
4.5x35
HV-0029
No.
012117
012118
908020
2016
PU
100
pc(s)
100
pc(s)
100
pc(s)
293
THERM+ H-V
System sections
■ Gaskets
THERM+ H-V
System sections 50 mm
Timber curtain wall
Polygon glazing system 34° to 45° with polygon interior and exterior gasket
Mullion section exterior angle
■ Technical information
■ Profiles
– Insulating strips available on demand.
Article
Cover profile 50/15
Profile polygonal
34° to 45°
Pressure profile 47
punched
Base profile 41 V
punched
No.
PU
013003
6m
013802
6m
118005
6m
144005
6m
No.
PU
011805
100 m
153050
40 m
No.
PU
■ Gaskets
Article
Gasket for pressure
profile 5 polygonal
Gasket for mullion 50 V
polygonal 34° to 45°
■ Accessories
Article
Pan head tapping
screw 5.5x55
Special timber screw
4.5x35
294
2016
HV-0033
012119
908020
100
pc(s)
100
pc(s)
THERM+ H-V
System sections 50 mm
Timber curtain wall
Cover profile options clipped
Mullion section
■ Technical information
■ Profiles
– Slipping down of the cover profiles must be
prevented.
Article
Cover profile 50/15
PU
6m
Cover profile 50/12
013004
6m
Cover profile 50/25
013005
6m
Cover profile 50/25
013201
6m
Cover profile 50/20
013210
6m
Pressure profile 47
punched
118005
6m
Cover profile 50/30
141106
6m
THERM+ H-V
System sections
– For more cover profiles, end caps and belay
sheet see Product range.
No.
013003
HV-0158
2016
295
THERM+ H-V
System sections 50 mm
Timber curtain wall
Pressure profile options with visible screw connection
Mullion section
■ Technical information
■ Profiles
– For more pressure profiles see Product range.
296
2016
Article
HV-0041
No.
PU
Pressure profile 50/12
013007
6m
Pressure profile 50/9
013008
6m
Pressure profile 50/25
013014
6m
THERM+ H-V
System sections 50 mm
Timber curtain wall
Flat pressure profile options
Mullion section with three options
■ Technical information
■ Profiles
– Minimum infill thickness 18 mm.
Article
Pressure profile 50/3
No.
PU
013300
6m
No.
PU
220205
100 m
No.
PU
■ Gaskets
Article
Gasket for pressure
profile 2/16
Article
Flat fillister head screw
5.5x35 with sealing ring
Pan head tapping screw
5.5x32
Pan head tapping screw
5.5x35 with sealing ring
Cover 11 S
HV-0043
012011
012110
012174
014110
2016
100
pc(s)
100
pc(s)
100
pc(s)
100
pc(s)
297
THERM+ H-V
System sections
■ Accessories
THERM+ H-V
System sections 50 mm
Timber curtain wall
Flat pressure profile options for polygon glazing system 3° to 7° with standard interior gasket
Mullion section exterior angle
■ Technical information
■ Profiles
– Minimum infill thickness 18 mm.
Article
– Selection of pressure profiles according to
infill thickness and angle.
Pressure profile 50/3
No.
PU
013300
6m
No.
PU
011850
200 m
■ Gaskets
Article
Gasket for pressure
profile 3 polygonal
3° to 7°
■ Accessories
Article
Flat fillister head screw
5.5x35 with sealing ring
Pan head tapping screw
5.5x32
Pan head tapping screw
5.5x35 with sealing ring
Cover 11 S
298
2016
HV-0032
No.
012011
012110
012174
014110
PU
100
pc(s)
100
pc(s)
100
pc(s)
100
pc(s)
THERM+ H-V
System sections 56 mm
Timber curtain wall
Certified passive house curtain wall with insulating block P 56/39
Mullion section/transom section
■ Technical information
■ Profiles
– Certified by passive house institute Dr. Feist.
Article
No.
PU
– Uf -values see chapter Thermal insulation.
Cover profile 56/15
013023
6m
Cover profile 56/12
013024
6m
118010
6m
144010
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
153105
40 m
– T1 = Depths from 50 mm.
Pressure profile 53
punched
Base profile 47 V
punched
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
Gasket for mullion 56 V
Gasket for transom 56 V
153110
40 m
Insulating block P 56/39
168520
50 m
No.
PU
■ Accessories
Article
Special countersunk
sheet metal screw 5.5x20
Pan head tapping screw
5.5x60
Crosspoint sealing plate
56
Sealing piece
for transom 56 V
HV-0108
012122
012123
100
pc(s)
100
pc(s)
016051
10 pc(s)
152017
100
pc(s)
Glass carrier 44 to 45 V
162087
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
2016
299
THERM+ H-V
System sections
■ Gaskets
THERM+ H-V
System sections 56 mm
Timber curtain wall
Certified passive house curtain wall, insulating block P 56/39, base profile for groove installation
Mullion section/transom section
■ Technical information
■ Profiles
– Certified by passive house institute Dr. Feist.
Article
No.
PU
– Uf -values see chapter Thermal insulation.
Cover profile 56/15
013023
6m
Cover profile 56/12
013024
6m
118010
6m
144025
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
153105
40 m
– T1 = Depths from 50 mm.
Pressure profile 53
punched
Base profile 47 V
with foot punched
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
Gasket for mullion 56 V
Gasket for transom 56 V
153110
40 m
Insulating block P 56/39
168520
50 m
No.
PU
■ Accessories
Article
Special countersunk
sheet metal screw 5.5x20
Pan head tapping screw
5.5x60
Sealing piece
for pressure profile 56
Crosspoint sealing plate
56
Sealing piece
for transom 56 V
300
2016
HV-0145
012122
012123
100
pc(s)
100
pc(s)
014036
10 pc(s)
016051
10 pc(s)
152017
100
pc(s)
Glass carrier 44 to 45 V
162087
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
THERM+ H-V
System sections 56 mm
Timber curtain wall
Insulating block P 56/19
Mullion section/transom section
■ Technical information
■ Profiles
– The type of insulating block P depends on the infill
thickness:
- 22 to 27 mm: insulating block P 56/19, No. 168515
- 28 to 41 mm: insulating block P 56/25, No. 168516
- 42 to 64 mm: insulating block P 56/39, No. 168520.
Article
No.
PU
013023
6m
118010
6m
144010
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
Gasket for mullion 56 V
153105
40 m
Gasket for transom 56 V
153110
40 m
Insulating block P 56/19
168515
50 m
Cover profile 56/15
Pressure profile 53
punched
Base profile 47 V
punched
– Uf -values see chapter Thermal insulation.
– T1 = Depths from 50 mm.
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
■ Accessories
Article
Pan head tapping screw
5.5x42
Special countersunk
sheet metal screw 5.5x20
Sealing piece
for pressure profile 56
Crosspoint sealing plate
56
Sealing piece
for transom 56 V
HV-0103
No.
012114
012122
PU
100
pc(s)
100
pc(s)
014036
10 pc(s)
016051
10 pc(s)
152017
100
pc(s)
Glass carrier 26 to 27 V
162042
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
2016
301
THERM+ H-V
System sections
■ Gaskets
THERM+ H-V
System sections 56 mm
Timber curtain wall
Insulating block 21
Mullion section/transom section
■ Technical information
■ Profiles
– Uf -values see chapter Thermal insulation.
Article
– T1 = Depths from 50 mm.
No.
PU
Cover profile 56/15
013023
6m
Cover profile 56/12
013024
6m
118010
6m
144010
6m
No.
PU
Insulating block 56/21
150610
50 m
Gasket for mullion 56 V
153105
40 m
Gasket for transom 56 V
153110
40 m
Pressure profile 53
punched
Base profile 47 V
punched
■ Gaskets
Article
■ Accessories
Article
Pan head tapping screw
5.5x42
Special countersunk
sheet metal screw 5.5x20
Sealing piece
for pressure profile 56
Crosspoint sealing plate
56
Sealing piece
for transom 56 V
302
2016
HV-0115
No.
012114
012122
PU
100
pc(s)
100
pc(s)
014036
10 pc(s)
016051
10 pc(s)
152017
100
pc(s)
Glass carrier 26 to 27 V
162042
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
THERM+ H-V
System sections 56 mm
Timber curtain wall
Insulating block 9
Mullion section/transom section
■ Technical information
■ Profiles
– Uf -values see chapter Thermal insulation.
Article
– T1 = Depths from 50 mm.
No.
PU
Cover profile 56/15
013023
6m
Cover profile 56/12
013024
6m
118010
6m
144010
6m
No.
PU
Pressure profile 53
punched
Base profile 47 V
punched
Article
Insulating block 56/9
151020
50 m
Gasket for mullion 56 V
153105
40 m
Gasket for transom 56 V
153110
40 m
■ Accessories
Article
Pan head tapping screw
5.5x42
Special countersunk
sheet metal screw 5.5x20
Sealing piece
for pressure profile 56
Crosspoint sealing plate
56
Sealing piece
for transom 56 V
HV-0111
No.
012114
012122
PU
100
pc(s)
100
pc(s)
014036
10 pc(s)
016051
10 pc(s)
152017
100
pc(s)
Glass carrier 26 to 27 V
162042
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
2016
303
THERM+ H-V
System sections
■ Gaskets
THERM+ H-V
System sections 56 mm
Timber curtain wall
Standard exterior gasket
Mullion section/transom section
■ Technical information
■ Profiles
– Uf -values see chapter Thermal insulation.
Article
– T1 = Depths from 50 mm.
No.
PU
Cover profile 56/15
013023
6m
Cover profile 56/12
013024
6m
Pressure profile 53
punched
118010
6m
Base profile 47 V punched
144010
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
Gasket for mullion 56 V
153105
40 m
Gasket for transom 56 V
153110
40 m
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
■ Accessories
Article
Pan head tapping screw
5.5x42
Special countersunk
sheet metal screw 5.5x20
Sealing piece
for pressure profile 56
Crosspoint sealing plate
56
Sealing piece
for transom 56 V
304
2016
HV-0100
No.
012114
012122
PU
100
pc(s)
100
pc(s)
014036
10 pc(s)
016051
10 pc(s)
152017
100
pc(s)
Glass carrier 26 to 27 V
162042
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
THERM+ H-V
System sections 56 mm
90°
Timber curtain wall
Corner mullion 90°, vertical
Mullion section/transom section
■ Profiles
Article
No.
PU
013023
6m
118010
6m
144010
6m
168023
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
Gasket for mullion 56 V
153105
40 m
Compensation gasket 2
227010
100 m
Cover profile 56/15
Pressure profile 53
punched
Base profile 47 V
punched
Connection profile 39/22 V
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
■ Accessories
Article
Pan head tapping screw
5.5x42
Special timber screw
4.5x35
Special countersunk
sheet metal screw 4.8x19
HV-0167
No.
012114
908020
908118
2016
PU
100
pc(s)
100
pc(s)
100
pc(s)
305
THERM+ H-V
System sections
■ Gaskets
THERM+ H-V
System sections 56 mm
90°
Timber curtain wall
Corner mullion 90°, vertical
Mullion section/transom section
■ Profiles
Article
No.
PU
013023
6m
118010
6m
144010
6m
168023
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
Gasket for mullion 56 V
153105
40 m
Compensation gasket 2
227010
100 m
Cover profile 56/15
Pressure profile 53
punched
Base profile 47 V
punched
Connection profile 39/22 V
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
■ Accessories
Article
Pan head tapping screw
5.5x42
Special timber screw
4.5x35
Special countersunk
sheet metal screw 4.8x19
306
2016
HV-0166
No.
012114
908020
908118
PU
100
pc(s)
100
pc(s)
100
pc(s)
THERM+ H-V
System sections 56 mm
Timber curtain wall
Corner mullion for variable angles, vertical
Mullion section/transom section
■ Profiles
Article
No.
PU
Cover profile 56/15
013023
6m
Pressure profile 53
punched
118010
6m
Base profile 47 V punched
144010
6m
Connection profile 39/22 V
168023
6m
■ Gaskets
No.
PU
Gasket for pressure prof. 3 011070.LI
100 m
Gasket for pressure prof. 3 011070.RE
100 m
Gasket for mullion 56 V
153105
40 m
Compensation gasket 2
227010
100 m
■ Accessories
Article
Pan head tapping screw
5.5x42
Special timber screw
4.5x35
Special countersunk
sheet metal screw 4.8x19
HV-0168
No.
012114
908020
908118
2016
PU
100
pc(s)
100
pc(s)
100
pc(s)
307
THERM+ H-V
System sections
Article
THERM+ H-V
System sections 56 mm
Timber curtain wall
Gasket for transom with flap between mullions
Transom section
■ Technical information
■ Profiles
– Available for all insulating blocks.
Article
– T1 = Depths from 50 mm.
Cover profile 56/12
Pressure profile 53
punched
Base profile 47 V
punched
No.
PU
013024
6m
118010
6m
144010
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
153115
40 m
No.
PU
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
Gasket for transom 56 V
with flap
■ Accessories
Article
Pan head tapping screw
5.5x42
Special countersunk
sheet metal screw 5.5x20
Sealing piece
for pressure profile 56
Crosspoint sealing plate
56
Sealing piece
for transom 56 V
308
2016
HV-0112a
012114
012122
100
pc(s)
100
pc(s)
014036
10 pc(s)
016051
10 pc(s)
152017
100
pc(s)
Glass carrier 26 to 27 V
162042
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
THERM+ H-V
System sections 56 mm
Timber curtain wall
Continuous base gasket with flap
Transom section
■ Technical information
■ Profiles
– Available for all insulating blocks.
Article
– Base gasket available up to an infill thickness
of 64 mm.
No.
PU
013024
6m
118010
6m
144010
6m
168005
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
Compensation gasket 2
011080
100 m
Base gasket for transom
56 V with flap
153120
40 m
Cover profile 56/12
Pressure profile 53
punched
Base profile 47 V
punched
– T1 = Depths from 50 mm.
Connection profile 36/22
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
■ Accessories
Article
Pan head tapping screw
5.5x42
Special countersunk
sheet metal screw 5.5x20
Sealing piece
for pressure profile 56
Crosspoint sealing plate
56
Sealing piece for base
transom V
10 - 64 mm
HV-0112b
No.
012114
012122
PU
100
pc(s)
100
pc(s)
014036
10 pc(s)
016051
10 pc(s)
152075
10 pc(s)
Glass carrier 26 to 27 V
162042
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
2016
309
THERM+ H-V
System sections
■ Gaskets
THERM+ H-V
System sections 56 mm
Timber curtain wall
Timber cover profile clipped
Mullion section/transom section
■ Technical information
■ Profiles
– Timber cover profiles are products complementary to
the RAICO system components, supplied by the fabricator.
It must be assured that the function of the glazing system
remains guaranteed by adaptation of the constructional
and material characteristics of the timber cover profile.
Article
Pressure profile 50
punched
Base profile 47 V
punched
– The norms and regulations concerning the use of timber
in exterior building areas must be respected.
No.
PU
118510
6m
144010
6m
■ Gaskets
– Timber cover profiles must be secured mechanically
after their installation.
Article
– For further information see Processing.
– T1 = Depths from 50 mm.
No.
PU
Gasket for pressure
profile 7 H
150510
100 m
Gasket for mullion 56 V
153105
40 m
Gasket for transom 56 V
153110
40 m
No.
PU
■ Accessories
Article
Pan head tapping screw
5.5x42
Special countersunk
sheet metal screw 5.5x20
Sealing piece
for pressure profile 56
Crosspoint sealing plate
56
Sealing piece
for transom 56 V
310
2016
HV-0023
012114
012122
100
pc(s)
100
pc(s)
014036
10 pc(s)
016051
10 pc(s)
152017
100
pc(s)
Glass carrier 26 to 27 V
162042
10 pc(s)
Cover profile fixation 80
167005
Special timber screw
4.5x35
908020
100
pc(s)
100
pc(s)
THERM+ H-V
System sections 56 mm
Timber curtain wall
Connection of ventilated/non-ventilated curtain wall
Transom section
■ Technical information
■ Profiles
– For the alternative solution (direct screw
connection) attention shall be paid to observing
a sufficient tolerance compensation
(see Processing).
Article
No.
PU
Cover profile 56/12
013024
6m
Pressure prof. 53 punched
118010
6m
Base profile 47 V punched
144010
6m
Connection profile 45/42
168060
6m
■ Gaskets
No.
Gasket for pressure prof. 3 011070.LI
PU
100 m
Gasket for pressure prof. 3 011070.RE
100 m
Gasket for pressure prof. 7
011074
100 m
Gasket for transom 56 V
with flap
153115
40 m
■ Accessories
Article
HV-0171
No.
PU
100
pc(s)
100
pc(s)
Pan head tapping screw
5.5x42
Special countersunk
sheet metal screw 5.5x20
Sealing piece
for pressure profile 56
012122
014036
10 pc(s)
Crosspoint sealing plate 56
016051
10 pc(s)
Sealing piece
for transom 56 V
152017
100
pc(s)
Glass carrier 26 to 27 V
162042
10 pc(s)
Special timber screw
4.5x35
908020
Terminal clamp 47/22
915501
012114
2016
100
pc(s)
100
pc(s)
311
THERM+ H-V
System sections
Article
THERM+ H-V
System sections 56 mm
Timber curtain wall
Interior compensation of varying infill thicknesses
Mullion section/transom section
■ Technical information
■ Profiles
– Possible compensation of infill thickness:
- 2 mm: compensation gasket 2, 154505
- 4 mm: compensation gasket 4, 154507
- 6 mm: compensation gasket 6, 154509.
Article
– T1 = Depths from 50 mm.
Pressure profile 53
punched
Base profile 47 V
punched
No.
PU
Cover profile 56/15
013023
6m
Cover profile 56/12
013024
6m
118010
6m
144010
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
Compensation gasket 4
154507
100 m
Gasket for mullion 56 V
158105
40 m
Gasket for transom 56 V
158110
40 m
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
■ Accessories
Article
Pan head tapping screw
5.5x42
Special countersunk
sheet metal screw 5.5x20
Sealing piece
for pressure profile 56
Crosspoint sealing plate
56
Sealing piece
for transom 50
312
2016
HV-0016
No.
012114
012122
PU
100
pc(s)
100
pc(s)
014036
10 pc(s)
016051
10 pc(s)
152040
100
pc(s)
Glass carrier 28 to 29 V
162047
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
THERM+ H-V
System sections 56 mm
Timber curtain wall
Single glazing
Mullion section/transom section
■ Technical information
■ Profiles
– Depending on the infill thickness the following gaskets
for pressure profile must be used:
- Infill thickness 8 to 9 mm: gaskets for pressure profile 5 mm
- Infill thickness from 10 mm: gaskets for pressure profile 3 mm.
Article
PU
Cover profile 56/15
013023
6m
Cover profile 56/12
013024
6m
118010
6m
144010
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
Gasket for mullion 56 V
153105
40 m
Gasket for transom 56 V
153110
40 m
Pressure profile 53
punched
Base profile 47 V
punched
– T1 = Depths from 50 mm.
No.
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
■ Accessories
Article
Pan head tapping screw
5.5x25
Special countersunk
sheet metal screw 5.5x20
Sealing piece
for pressure profile 56
Crosspoint sealing plate
56
Sealing piece
for transom 56 V
HV-0101
No.
012107
012122
PU
100
pc(s)
100
pc(s)
014036
10 pc(s)
016051
10 pc(s)
152017
100
pc(s)
Glass carrier 10 to 11 V
162002
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
2016
313
THERM+ H-V
System sections
■ Gaskets
THERM+ H-V
System sections 56 mm
Timber curtain wall
Expansion mullion
Mullion section
■ Technical information
■ Profiles
– T11 = Depths from 100 mm.
Article
No.
PU
Cover profile 56/15
013023
6m
Pressure profile 53
punched
118010
6m
Insertion profile 16/10 V
168220
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
153335
40 m
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
Gasket for mullion 56 H V
■ Accessories
Article
Pan head tapping screw
5.5x42
Pan Head timber screw
4.5x20
PU sealing strip 10/7
offset arrangement
314
2016
HV-0118
No.
012114
907550
951990
PU
100
pc(s)
100
pc(s)
10 m
THERM+ H-V
System sections 56 mm
Timber curtain wall
Polygon glazing system with standard interior gasket 1° to 7°
Mullion section exterior angle/interior angle
■ Technical information
■ Profiles
– With exterior gasket for pressure profile 5 mm
and standard interior gasket to max. 7°.
Article
Cover profile 56/15
Pressure profile 53
punched
Base profile 47 V
punched
No.
PU
013023
6m
118010
6m
144010
6m
■ Gaskets
Article
No.
PU
Gasket for pressure
profile 5
011073
100 m
Gasket for mullion 56 V
153105
40 m
No.
PU
Article
Pan head tapping screw
5.5x45
Special timber screw
4.5x35
HV-0105
012115
908020
2016
100
pc(s)
100
pc(s)
315
THERM+ H-V
System sections
■ Accessories
THERM+ H-V
System sections 56 mm
Timber curtain wall
Polygon glazing system 8° to 15°
Mullion section exterior angle
■ Technical information
■ Profiles
Article
– Face width of cover profile depends on angle
and infill thickness.
Cover profile 76/15
– Glass bite (A and B) must be min. 13 mm.
The distance between glass edge and gasket
cap (C) has to be min. 3 mm.
Please note the glass tolerances!
Pressure profile 73
punched
Base profile 47 V
punched
No.
PU
013050
6m
118015
6m
144010
6m
No.
PU
011810
100 m
153140
40 m
■ Gaskets
Article
Gasket for pressure
profile 8° to 15°
Gasket for transom 56 V
polygonal 8° to 20°
■ Accessories
Article
Pan head tapping screw
5.5x45
Special timber screw
4.5x35
316
2016
HV-0045
No.
012115
908020
PU
100
pc(s)
100
pc(s)
THERM+ H-V
System sections 56 mm
Timber curtain wall
Polygon glazing system 8° to 20° and 21° to 33° with polygon interior and exterior gasket
Mullion section exterior angle
■ Technical information
■ Profiles
– Insulating strips available on demand.
Article
Cover profile 56/15
Profile polygonal
8° to 20°
Profile polygonal
21° to 33°
Pressure profile 53
punched
Base profile 47 V
punched
No.
PU
013023
6m
013800
6m
013801
6m
118010
6m
144010
6m
No.
PU
011805
100 m
153140
40 m
153145
40 m
Article
Gasket for pressure
profile 5 polygonal
Gasket for transom 56 V
polygonal 8° to 20°
Gasket for mullion 56 V
polygonal 21° to 33°
■ Accessories
Article
Pan head tapping screw
5.5x50
Pan head tapping screw
5.5x52
Special timber screw
4.5x35
HV-0106
No.
012117
012118
908020
2016
PU
100
pc(s)
100
pc(s)
100
pc(s)
317
THERM+ H-V
System sections
■ Gaskets
THERM+ H-V
System sections 56 mm
Timber curtain wall
Polygon glazing system 34° to 45° with polygon interior and exterior gasket
Mullion section exterior angle
■ Technical information
■ Profiles
– Insulating strips available on demand.
Article
Cover profile 56/15
Profile polygonal
34° to 45°
Pressure profile 53
punched
Base profile 47 V
punched
No.
PU
013023
6m
013802
6m
118010
6m
144010
6m
No.
PU
011805
100 m
153150
40 m
No.
PU
■ Gaskets
Article
Gasket for pressure
profile 5 polygonal
Gasket for mullion 56 V
polygonal 34° to 45°
■ Accessories
Article
Pan head tapping
screw 5.5x55
Special timber screw
4.5x35
318
2016
HV-0020
012119
908020
100
pc(s)
100
pc(s)
THERM+ H-V
System sections 56 mm
Timber curtain wall
Cover profile options clipped
Mullion section
■ Technical information
■ Profiles
– Slipping down of the cover profiles must
be prevented.
Article
Cover profile 56/15
PU
6m
Cover profile 56/12
013024
6m
Cover profile 56/25
013025
6m
Cover profile 56/25
013400
6m
Cover profile 56/20
013410
6m
Pressure profile 53
punched
118010
6m
Cover profile 56/32
141307
6m
THERM+ H-V
System sections
– For more cover profiles, end caps and belay
sheet see Product range.
No.
013023
HV-0024
2016
319
THERM+ H-V
System sections 56 mm
Timber curtain wall
Pressure profile options visible screwed
Mullion section
■ Technical information
■ Profiles
– For more pressure profiles see Product range.
320
2016
Article
HV-0025
No.
PU
Pressure profile 56/12
013027
6m
Pressure profile 56/9
013028
6m
THERM+ H-V
System sections 56 mm
Timber curtain wall
Flat pressure profile options
Mullion section with three options
■ Technical information
■ Profiles
– Minimum infill thickness 18 mm.
Article
Pressure profile 56/3
No.
PU
013310
6m
No.
PU
220205
100 m
No.
PU
■ Gaskets
Article
Gasket for pressure
profile 2/16
Article
Flat fillister head screw
5.5x35 with sealing ring
Pan head tapping screw
5.5x32
Pan head tapping screw
5.5x35 with sealing ring
Cover 11 S
HV-0014
012011
012110
012174
014110
2016
100
pc(s)
100
pc(s)
100
pc(s)
100
pc(s)
321
THERM+ H-V
System sections
■ Accessories
THERM+ H-V
System sections 56 mm
Timber curtain wall
Flat pressure profile options for polygon glazing system 3° to 7° with standard interior gasket
Mullion section exterior angle
■ Technical information
■ Profiles
– Minimum infill thickness 18 mm.
Article
– Selection of pressure profiles according to
infill thickness and angle.
Pressure profile 56/3
No.
PU
013310
6m
No.
PU
011850
200 m
■ Gaskets
Article
Gasket for pressure
profile 3 polygonal
3° to 7°
■ Accessories
Article
Flat fillister head screw
5.5x35 with sealing ring
Pan head tapping screw
5.5x35
Pan head tapping screw
5.5x38 with sealing ring
Cover 11 S
322
2016
HV-0015
No.
012011
012111
012175
014110
PU
100
pc(s)
100
pc(s)
100
pc(s)
100
pc(s)
THERM+ H-V
System sections 76 mm
Timber curtain wall
Certified passive house curtain wall with insulating block P 76/39
Mullion section/transom section
■ Technical information
■ Profiles
– Certified by passive house institute Dr. Feist.
Article
No.
PU
– Uf -values see chapter Thermal insulation.
Cover profile 76/15
013050
6m
Cover profile 76/12
013051
6m
118015
6m
144015
6m
– T1 = Depths from 50 mm.
Pressure profile 73
punched
Base profile 67 V
punched
Article
No.
PU
Gasket for pressure
profile 5
011073
100 m
Gasket for mullion 76 V
153205
40 m
Gasket for transom 76 V
153210
40 m
Insulating block P 76/39
168526
50 m
■ Accessories
Article
Special countersunk
sheet metal screw 5.5x20
Pan head tapping screw
5.5x60
Cross point sealing plate
76 P
Sealing piece
for transom 76 V
Sealing piece
for pressure profile 76/5
HV-0123
No.
012122
012123
PU
100
pc(s)
100
pc(s)
016056
10 pc(s)
152058
100
pc(s)
152421
10 pc(s)
Glass carrier 44 to 45 V
162087
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
2016
323
THERM+ H-V
System sections
■ Gaskets
THERM+ H-V
System sections 76 mm
Timber curtain wall
Certified passive house curtain wall, insulating block P 76/39, base profile for groove installation
Mullion section/transom section
■ Technical information
■ Profiles
– Certified by passive house institute Dr. Feist.
Article
No.
PU
– Uf -values see chapter Thermal insulation.
Cover profile 76/15
013050
6m
Cover profile 76/12
013051
6m
118015
6m
144030
6m
– T1 = Depths from 50 mm.
Pressure profile 73
punched
Base profile 67 V
with foot punched
■ Gaskets
Article
No.
PU
Gasket for pressure
profile 5
011073
100 m
Gasket for mullion 76 V
153205
40 m
Gasket for transom 76 V
153210
40 m
Insulating block P 76/39
168526
50 m
No.
PU
012122
100
pc(s)
012123
100
pc(s)
016056
10 pc(s)
152058
100
pc(s)
152421
10 pc(s)
Glass carrier 44 to 45 V
162087
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
■ Accessories
Article
Special countersunk
sheet metal screw
5.5x20
Pan head tapping screw
5.5x60
Cross point sealing plate
76 P
Sealing piece
for transom 76 V
Sealing piece
for pressure profile 76/5
324
2016
HV-0146
THERM+ H-V
System sections 76 mm
Timber curtain wall
Insulating block P 76/19
Mullion section/transom section
■ Technical information
■ Profiles
– The type of insulating block P depends on the infill
thickness:
- 22 to 27 mm: insulating block P 76/19, No. 168521
- 28 to 64 mm: insulating block P 76/25, No. 168522.
Article
No.
PU
Cover profile 76/15
013050
6m
Cover profile 76/12
013051
6m
118015
6m
144015
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
Gasket for mullion 76 V
153205
40 m
Gasket for transom 76 V
153210
40 m
Insulating block P 76/19
168521
50 m
Pressure profile 73
punched
Base profile 67 V
punched
– Uf -values see chapter Thermal insulation.
– T1 = Depths from 50 mm.
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
■ Accessories
Article
Pan head tapping screw
5.5x42
Special countersunk
sheet metal screw 5.5x20
Sealing piece
for pressure profile 76
Crosspoint sealing plate
76
Sealing piece
for transom 76 V
HV-0129
No.
012114
012122
PU
100
pc(s)
100
pc(s)
014037
10 pc(s)
016052
10 pc(s)
152058
100
pc(s)
Glass carrier 26 to 27 V
162042
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
2016
325
THERM+ H-V
System sections
■ Gaskets
THERM+ H-V
System sections 76 mm
Timber curtain wall
Insulating block 17
Mullion section/transom section
■ Technical information
■ Profiles
– Uf -values see chapter Thermal insulation.
Article
– T1 = Depths from 50 mm.
No.
PU
Cover profile 76/15
013050
6m
Cover profile 76/12
013051
6m
118015
6m
144015
6m
No.
PU
Insulating block 76/17
151035
50 m
Gasket for mullion 76 V
153205
40 m
Gasket for transom 76 V
153210
40 m
Pressure profile 73
punched
Base profile 67 V
punched
■ Gaskets
Article
■ Accessories
Article
20
Pan head tapping screw
5.5x42
Special countersunk
sheet metal screw 5.5x20
Sealing piece
for pressure profile 76
Crosspoint sealing plate
76
Sealing piece
for transom 76 V
20
326
2016
HV-0128
No.
012114
012122
PU
100
pc(s)
100
pc(s)
014037
10 pc(s)
016052
10 pc(s)
152058
100
pc(s)
Glass carrier 26 to 27 V
162042
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
THERM+ H-V
System sections 76 mm
Timber curtain wall
Insulating block 9
Mullion section/transom section
■ Technical information
■ Profiles
– Uf -values see chapter Thermal insulation.
Article
– T1 = Depths from 50 mm.
No.
PU
Cover profile 76/15
013050
6m
Cover profile 76/12
013051
6m
118015
6m
144015
6m
No.
PU
Pressure profile 73
punched
Base profile 67 V
punched
Article
Insulating block 76/9
151030
50 m
Gasket for mullion 76 V
153205
40 m
Gasket for transom 76 V
153210
40 m
■ Accessories
Article
Pan head tapping screw
5.5x42
Special countersunk
sheet metal screw 5.5x20
Sealing piece
for pressure profile 76
Crosspoint sealing plate
76
Sealing piece
for transom 76 V
HV-0127
No.
012114
012122
PU
100
pc(s)
100
pc(s)
014037
10 pc(s)
016052
10 pc(s)
152058
100
pc(s)
Glass carrier 26 to 27 V
162042
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
2016
327
THERM+ H-V
System sections
■ Gaskets
THERM+ H-V
System sections 76 mm
Timber curtain wall
Standard exterior gasket
Mullion section/transom section
■ Technical information
■ Profiles
– Uf -values see chapter Thermal insulation.
Article
– T1 = Depths from 50 mm.
No.
PU
Cover profile 76/15
013050
6m
Cover profile 76/12
013051
6m
118015
6m
144015
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
Gasket for mullion 76 V
153205
40 m
Gasket for transom 76 V
153210
40 m
Pressure profile 73
punched
Base profile 67 V
punched
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
■ Accessories
Article
Pan head tapping screw
5.5x42
Special countersunk
sheet metal screw 5.5x20
Sealing piece
for pressure profile 76
Crosspoint sealing plate
76
Sealing piece
for transom 76 V
328
2016
HV-0121
No.
012114
012122
PU
100
pc(s)
100
pc(s)
014037
10 pc(s)
016052
10 pc(s)
152058
100
pc(s)
Glass carrier 26 to 27 V
162042
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
THERM+ H-V
System sections 76 mm
90°
Timber curtain wall
Corner mullion 90°, vertical
Mullion section/transom section
■ Profiles
Article
No.
PU
Cover profile 76/15
013050
6m
Pressure profile 73
punched
118015
6m
Base profile 67 V punched
144015
6m
Connection profile 48/22 V
168028
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
Gasket for mullion 76 V
153205
40 m
Compensation gasket 2
227010
100 m
■ Accessories
Article
Pan head tapping screw
5.5x42
Special timber screw
4.5x35
Special countersunk
sheet metal screw 4.8x19
HV-0169
No.
012114
908020
908118
2016
PU
100
pc(s)
100
pc(s)
100
pc(s)
329
THERM+ H-V
System sections
■ Gaskets
THERM+ H-V
System sections 76 mm
Timber curtain wall
Corner mullion for variable angles, vertical
Mullion section/transom section
■ Profiles
Article
Cover profile 76/15
Pressure prof. 73 punched
Base profile 67 V punched
Connection profile 48/22 V
No.
013050
118015
144015
168028
PU
6m
6m
6m
6m
■ Gaskets
Article
No.
Gasket for pressure prof. 3 011070.LI
Gasket for pressure prof. 3 011070.RE
Gasket for mullion 76 V
153205
Compensation gasket 2
227010
PU
100 m
100 m
40 m
100 m
■ Accessories
Article
Pan head tapping screw
5.5x42
Special timber screw
4.5x35
Special countersunk
sheet metal screw 4.8x19
330
2016
HV-0170
No.
012114
908020
908118
PU
100
pc(s)
100
pc(s)
100
pc(s)
THERM+ H-V
System sections 76 mm
Timber curtain wall
Timber cover profile clipped
Mullion section/transom section
■ Technical information
■ Profiles
– Timber cover profiles are products complementary to
the RAICO system components, supplied by the fabricator.
It must be assured that the function of the glazing system
remains guaranteed by adaptation of the constructional
and material characteristics of the timber cover profile.
– The norms and regulations concerning the use of timber
in exterior building areas must be respected.
– Timber cover profiles must be secured mechanically
after their installation.
– For further information see Processing.
– T1 = Depths from 50 mm.
Article
Pressure profile 70
punched
Base profile 67 V
punched
No.
PU
118515
6m
144015
6m
■ Gaskets
Article
No.
PU
Gasket for pressure
profile 7 H
150510
100 m
Gasket for mullion 76 V
153205
40 m
Gasket for transom 76 V
153210
40 m
No.
PU
Article
Pan head tapping screw
5.5x42
Special countersunk
sheet metal screw 5.5x20
Sealing piece
for pressure profile 76
Crosspoint sealing plate
76
Sealing piece
for transom 76 V
HV-0134
012114
012122
100
pc(s)
100
pc(s)
014037
10 pc(s)
016052
10 pc(s)
152058
100
pc(s)
Glass carrier 26 to 27 V
162042
10 pc(s)
Cover profile fixation 80
167005
Special timber screw
4.5x35
908020
2016
100
pc(s)
100
pc(s)
331
THERM+ H-V
System sections
■ Accessories
THERM+ H-V
System sections 76 mm
Timber curtain wall
Single glazing
Mullion section/transom section
■ Technical information
■ Profiles
– Depending on the infill thickness the following gaskets
for pressure profile must be used:
- Infill thickness 8 to 9 mm: gaskets for pressure profile 5 mm
- Infill thickness from 10 mm: gaskets for pressure profile 3 mm.
Article
– T1 = Depths from 50 mm.
Pressure profile 73
punched
Base profile 67 V
punched
No.
PU
Cover profile 76/15
013050
6m
Cover profile 76/12
013051
6m
118015
6m
144015
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
Gasket for mullion 76 V
153205
40 m
Gasket for transom 76 V
153210
40 m
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
■ Accessories
Article
Pan head tapping screw
5.5x25
Special countersunk
sheet metal screw 5.5x20
Sealing piece
for pressure profile 76
Crosspoint sealing plate
76
Sealing piece
for transom 76 V
332
2016
HV-0131
No.
012107
012122
PU
100
pc(s)
100
pc(s)
014037
10 pc(s)
016052
10 pc(s)
152058
100
pc(s)
Glass carrier 10 to 11 V
162002
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
THERM+ H-V
System sections 76 mm
Timber curtain wall
Polygon glazing system with standard interior gasket 1° to 7°
Mullion section exterior angle/interior angle
■ Technical information
■ Profiles
– With exterior gasket for pressure profile 5 mm
and standard interior gasket to max. 7°.
Article
Cover profile 76/15
Pressure profile 73
punched
Base profile 67 V
punched
No.
PU
013050
6m
118015
6m
144015
6m
■ Gaskets
Article
No.
PU
Gasket for pressure
profile 5
011073
100 m
Gasket for mullion 76 V
153205
40 m
No.
PU
Article
Pan head tapping screw
5.5x42
Pan head tapping screw
5.5x45
Special timber screw
4.5x35
HV-0132
012114
012115
908020
2016
100
pc(s)
100
pc(s)
100
pc(s)
333
THERM+ H-V
System sections
■ Accessories
THERM+ H-V
System sections 76 mm
Timber curtain wall
Cover profile options clipped
Mullion section
■ Technical information
■ Profile
Article
– Slipping down of the cover profiles must
be prevented.
– For more cover profiles, end caps and belay
sheet see Product range.
334
2016
HV-0159
No.
PU
Cover profile 76/15
013050
6m
Cover profile 76/12
013051
6m
Cover profile 76/20
013610
6m
Cover profile 76/25
013615
6m
Pressure profile 73
punched
118015
6m
Cover profile 76/25
141505
6m
THERM+ H-V
System sections 76 mm
Timber curtain wall
Flat pressure profile options
Mullion section with three options
■ Technical information
■ Profiles
– Minimum infill thickness 18 mm.
Article
Pressure profile 76/3
No.
PU
013313
6m
No.
PU
220205
100 m
No.
PU
■ Gaskets
Article
Gasket for pressure
profile 2/16
Article
Flat fillister head screw
5.5x35 with sealing ring
Pan head tapping screw
5.5x32
Pan head tapping screw
5.5x35 with sealing ring
Cover 11 S
HV-0130
012011
012110
012174
014110
2016
100
pc(s)
100
pc(s)
100
pc(s)
100
pc(s)
335
THERM+ H-V
System sections
■ Accessories
THERM+ H-V
System sections 76 mm
Timber curtain wall
Flat pressure profile options for polygon glazing system 3° to 7° with standard interior gasket
Mullion section exterior angle
■ Technical information
■ Profiles
– Minimum infill thickness 18 mm.
Article
– Selection of pressure profiles according to
infill thickness and angle.
Pressure profile 76/3
No.
PU
013313
6m
No.
PU
011850
200 m
■ Gaskets
Article
Gasket for pressure
profile 3 polygonal
3° to 7°
■ Accessories
Article
Flat fillister head screw
5.5x32 with sealing ring
Pan head tapping screw
5.5x35
Pan head tapping screw
5.5x35 with sealing ring
Cover 11 S
336
2016
HV-0160
No.
012010
012111
012174
014110
PU
100
pc(s)
100
pc(s)
100
pc(s)
100
pc(s)
THERM+ H-V
Building connections 50/56/76 mm
Timber curtain wall
Wall connection with thermal insulation system
■ Technical information
THERM+ H-V
System sections
– T255 = Vapour-tight membrane no. 951015.
HV-1030
2016
337
THERM+ H-V
Building connections 50/56/76 mm
Timber curtain wall
Wall connection with ventilated façade panelling
■ Technical information
– T128 = Breather membrane no. 951029.
– T251 = Make provision for insect screen.
– T255 = Vapour-tight membrane no. 951015.
338
2016
HV-1031
THERM+ H-V
Building connections 50/56 mm
Timber curtain wall
Wall connection structural glazing SG2 with thermal insulation system
■ Technical information
– Approval required in individual cases.
THERM+ H-V
System sections
– T129 = Vapour-tight membrane no. 951019.
HV-1032
2016
339
THERM+ H-V
Building connections 50/56/76 mm
Timber curtain wall
Base connection with drainage to the front
■ Technical information
– *Mask joint of mullion-transom or carry out vapour-tight.
– T126 = Vapour-tight membrane no. 951021.
– T249 = Execution vapour-tight or as breather membrane
depending on installation-site.
– T250 = Insulation with mineral cotton when required.
340
2016
HV-1033
THERM+ H-V
Building connections 50/56/76 mm
Timber curtain wall
Base connection with drainage to the bottom
■ Technical information
– *Mask joint of mullion-transom or carry out vapour-tight.
– T126 = Vapour-tight membrane no. 951021.
– T249 = Execution vapour-tight or as breather membrane
depending on installation-site.
– T250 = Insulation with mineral cotton when required.
THERM+ H-V
System sections
– T251 = Make provision for insect screen.
HV-1034
2016
341
THERM+ H-V
Building connections 50/56/76 mm
Timber curtain wall
Base connection with frame profile
■ Technical information
– Connection profile no. 168080:
- Continuous insertion for bottom and top connection.
- Cut out in mullion area for drainage/ventilation.
– *Mask joint of mullion-transom or carry out vapour-tight.
– Observe the different rates of thermal expansion for the screw connection
of the aluminium window sill with the synthetic connection profile.
– T129 = Vapour-tight membrane no. 951019.
– T251 = Make provision for insect screen.
– T252 = Breather membrane no. 951031.
342
2016
HV-1035
THERM+ H-V
Building connections 50/56/76 mm
Timber curtain wall
Ceiling connection as non-locating bearing with thermal insulation system
■ Technical information
THERM+ H-V
System sections
– T126 = Vapour-tight membrane no. 951021.
HV-1036
2016
343
THERM+ H-V
Building connections 50/56/76 mm
Timber curtain wall
Ceiling connection as non-locating bearing with ventilated façade panelling
■ Technical information
– T126 = Vapour-tight membrane no. 951021.
– T251 = Make provision for insect screen.
– T252 = Breather membrane no. 951031.
344
2016
HV-1037
THERM+ H-V
Building connections 50/56/76 mm
Timber curtain wall
Intermediate ceiling with curtain wall and panel joint
■ Technical information
– *Mask joint of mullion-transom or carry out vapour-tight.
– Pressure relief of the region behind the panel by cuttings
in the mullion gasket.
– T30 = Notching.
– T124 = Breather membrane.
– T129 = Vapour-tight membrane no. 951019.
– T253 = Insulation with
non-flammable
mineral-cotton.
THERM+ H-V
System sections
– T254 = Seal joints.
HV-1038
2016
345
THERM+ H-V
Building connections 50/56/76 mm
Timber curtain wall
Intermediate ceiling with inserted construction and panel joint
■ Technical information
– *Mask joint of mullion-transom
or carry out vapour-tight.
– Pressure relief of the region
behind the panel by cuttings
in the mullion gasket.
– Stabilisation of the panel in the
upper region when required.
– T30 = Notching.
– T124 = Breather membrane.
– T129 = Vapour-tight membrane
no. 951019.
– T253 = Insulation with
non-flammable
mineral-cotton.
– T254 = Seal joints.
346
2016
HV-1039
THERM+ H-V
Building connections 50/56/76 mm
Timber curtain wall
Connection of curtain wall and attic
■ Technical information
– T126 = Vapour-tight membrane no. 951021.
– T251 = Make provision for insect screen.
THERM+ H-V
System sections
– T252 = Breather membrane no. 951031.
HV-1040
2016
347
THERM+ H-V
Building connections 50/56/76 mm
Timber curtain wall
Attic with inserted curtain wall with ventilated façade panelling
■ Technical information
– T124 = Breather membrane.
– T126 = Vapour-tight membrane
no. 951021.
– T251 = Make provision
for insect screen.
– T252 = Breather membrane
no. 951031.
348
2016
HV-1041
Content
Add-ons
351
353
365
377
Structural Glazing
System benefits
Sections Structural Glazing SG2
Exterior sealing
Screw selection
Selection insulating block
Selection glass carriers
Suction discs
Indications for the execution of silicone joints
381
383
386
389
390
391
392
394
THERM+ H-V
Add-ons
Burglar prevention
System benefits
Sections resistance class WK2
Sections resistance class WK3
Screw selection WK2/WK3
2016
349
350
2016
THERM+ H-V
System benefits
Timber curtain wall 50/56/76 mm
Burglar-resistant curtain walls – Technology in detail
■ Features burglar-resistant curtain wall
– Resistance classes WK2 and WK3.
-
WK2:
- Additional shimming with glass carriers.
- Balls in the screw heads.
WK3:
- Additional shimming with glass carriers.
- Balls in the screw heads.
- Pressure profile reinforcement.
- Reinforced screwing in the screw channel.
– Only few additional components.
– No visual difference between the variations.
– A huge selection of pressure and cover profiles.
– System widths and infill thicknesses identical to the basic system.
– For skylight glazing.
– Simple and efficient assembly.
THERM+ H-V
Add-ons
– Extension by the use of insertion elements of FRAME+ and WING.
Resistance class WK2
Resistance class WK3
SHV-0003
2016
351
352
2016
THERM+ H-V
Burglar-resistant curtain wall WK2
Timber curtain wall
Standard exterior gasket
Mullion section/transom section 50 mm
■ Technical information
■ Profiles
– Burglar-resistant curtain wall WK2 (EF1)
acc. to DIN EN 1627 (DIN V 18054).
Article
– Glazing class WK2-P4A (old A3).
– For blocking of the glass unit
see Processing.
No.
PU
Cover profile 50/15
013003
6m
Cover profile 50/20
013210
6m
118005
6m
144005
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
Gasket for mullion 50 V
153005
40 m
Gasket for transom 50 V
153010
40 m
Pressure profile 47
punched
Base profile 41 V
punched
– T1 = Depths from 50 mm.
– T17 = Depths from 80 mm.
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
Article
Special countersunk
sheet metal screw 5.5x20
Flat fillister head screw
5.5x42
Sealing piece
for pressure profile 50
012153
10 pc(s)
014060
100
pc(s)
016050
10 pc(s)
152012
100
pc(s)
Glass carrier 26 to 27 V
162042
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
Crosspoint sealing plate
50
Sealing piece
for transom 50 V
HVWK-0001
012122
PU
100
pc(s)
100
pc(s)
014035
Bullet for screw heads
22 - 64 mm
No.
2016
353
THERM+ H-V
Add-ons
22 - 64 mm
■ Accessories
THERM+ H-V
Burglar-resistant curtain wall WK2
Timber curtain wall
Gasket for transom with flap between mullions
Transom section 50 mm
■ Technical information
■ Profiles
– Burglar-resistant curtain wall WK2 (EF1)
acc. to DIN EN 1627 (DIN V 18054).
Article
Cover profile 50/15
– Glazing class WK2-P4A (old A3).
Pressure profile 47
punched
Base profile 41 V
punched
– For blocking of the glass unit
see Processing.
– T1 = Depths from 50 mm.
No.
PU
013003
6m
118005
6m
144005
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
153015
40 m
No.
PU
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
Gasket for transom 50 V
with flap
■ Accessories
Article
Special countersunk
sheet metal screw 5.5x20
Flat fillister head screw
5.5x42
Sealing piece
for pressure profile 50
10 pc(s)
014060
100
pc(s)
016050
10 pc(s)
152012
100
pc(s)
Glass carrier 26 to 27 V
162042
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
Crosspoint sealing plate
50
Sealing piece
for transom 50 V
354
2016
HVWK-0002a
012153
100
pc(s)
100
pc(s)
014035
Bullet for screw heads
22 - 64 mm
012122
THERM+ H-V
Burglar-resistant curtain wall WK2
Timber curtain wall
Continuous base gasket with flap
Transom section 50 mm
■ Technical information
■ Profiles
– Burglar-resistant curtain wall WK2 (EF1)
acc. to DIN EN 1627 (DIN V 18054).
Article
– Glazing class WK2-P4A (old A3).
– For blocking of the glass unit
see Processing.
– T1 = Depths from 50 mm.
No.
PU
Cover profile 50/15
013003
6m
Pressure prof. 47 punched
118005
6m
Base profile 41 V punched
144005
6m
Connection profile 36/22
168005
6m
■ Gaskets
Article
No.
Gasket for pressure prof. 3 011070.LI
PU
100 m
Gasket for pressure prof. 3 011070.RE
100 m
Compensation gasket 2
011080
100 m
Base gasket for transom
50 V with flap
153020
40 m
■ Accessories
No.
PU
100
pc(s)
100
pc(s)
Special countersunk
sheet metal screw 5.5x20
Flat fillister head screw
5.5x42
Sealing piece
for pressure profile 50
012153
014035
10 pc(s)
Bullet for screw heads
014060
100
pc(s)
016050
10 pc(s)
152010
100
pc(s)
152075
10 pc(s)
Glass carrier 26 to 27 V
162042
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
Crosspoint sealing plate
50
Sealing piece
for transom 50
Sealing piece
for base transom V
012122
22 - 64 mm
HVWK-0002b
2016
355
THERM+ H-V
Add-ons
Article
THERM+ H-V
Burglar-resistant curtain wall WK2
Timber curtain wall
Cover profile options clipped
Mullion section 50 mm
■ Technical information
■ Profiles
– Burglar-resistant curtain wall WK2 (EF1)
acc. to DIN EN 1627 (DIN V 18054).
Article
– Glazing class WK2-P4A (old A3).
– Slipping down of the cover profiles
must be prevented.
– For more cover profiles, end caps and
belay sheet see Product range.
356
2016
HVWK-0003
No.
PU
Cover profile 50/15
013003
6m
Cover profile 50/12
013004
6m
Cover profile 50/25
013005
6m
Cover profile 50/25
013201
6m
Cover profile 50/20
013210
6m
Pressure profile 47
punched
118005
6m
Cover profile 50/30
141106
6m
THERM+ H-V
Burglar-resistant curtain wall WK2
Timber curtain wall
Pressure profile options visible screwed
Mullion section 50 mm
■ Technical information
■ Profiles
– Burglar-resistant curtain wall WK2 (EF1)
acc. to DIN EN 1627 (DIN V 18054).
Article
Pressure profile 50/12
– Glazing class WK2-P4A (old A3).
PU
6m
Pressure profile 50/9
013008
6m
Pressure profile 50/25
013014
6m
Pressure profile 50/3
013300
6m
THERM+ H-V
Add-ons
– For more pressure profiles see Product range.
No.
013007
HVWK-0004
2016
357
THERM+ H-V
Burglar-resistant curtain wall WK2
Timber curtain wall
Standard exterior gasket
Mullion section/transom section 56 mm
■ Technical information
■ Profiles
– Burglar-resistant curtain wall WK2 (EF1)
acc. to DIN EN 1627 (DIN V 18054).
Article
– Glazing class WK2-P4A (old A3).
– For blocking of the glass unit
see Processing.
No.
PU
Cover profile 56/15
013023
6m
Cover profile 56/20
013410
6m
118010
6m
144010
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
Gasket for mullion 56 V
153105
40 m
Gasket for transom 56 V
153110
40 m
Pressure profile 53
punched
Base profile 47 V
punched
– T1 = Depths from 50 mm.
– T17 = Depths from 80 mm.
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
■ Accessories
Article
Special countersunk
sheet metal screw 5.5x20
Flat fillister head screw
5.5x42
Sealing piece
for pressure profile 56
HVWK-0011
012153
10 pc(s)
014060
100
pc(s)
016051
10 pc(s)
152017
100
pc(s)
Glass carrier 26 to 27 V
162042
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
Crosspoint sealing plate
56
Sealing piece
for transom 56 V
2016
012122
PU
100
pc(s)
100
pc(s)
014036
Bullet for screw heads
358
No.
THERM+ H-V
Burglar-resistant curtain wall WK2
Timber curtain wall
Gasket for transom with flap between mullions
Transom section 56 mm
■ Technical information
■ Profiles
– Burglar-resistant curtain wall WK2 (EF1)
acc. to DIN EN 1627 (DIN V 18054).
Article
Cover profile 56/15
– Glazing class WK2-P4A (old A3).
Pressure profile 53
punched
Base profile 47 V
punched
– For blocking of the glass unit
see Processing.
– T1 = Depths from 50 mm.
No.
PU
013023
6m
118010
6m
144010
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
153115
40 m
No.
PU
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
Gasket for transom 56 V
with flap
■ Accessories
Special countersunk
sheet metal screw 5.5x20
Flat fillister head screw
5.5x42
Sealing piece
for pressure profile 56
012153
014036
10 pc(s)
Bullet for screw heads
014060
100
pc(s)
016051
10 pc(s)
152017
100
pc(s)
Glass carrier 26 to 27 V
162042
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
Crosspoint sealing plate
56
Sealing piece
for transom 56 V
HVWK-0012a
012122
2016
100
pc(s)
100
pc(s)
359
THERM+ H-V
Add-ons
Article
THERM+ H-V
Burglar-resistant curtain wall WK2
Timber curtain wall
Continuous base gasket with flap
Transom section 56 mm
■ Technical information
■ Profiles
– Burglar-resistant curtain wall WK2 (EF1)
acc. to DIN EN 1627 (DIN V 18054).
Article
No.
PU
Cover profile 56/15
013023
6m
– For blocking of the glass unit
see Processing.
Pressure profile 53
punched
118010
6m
Base profile 47 V punched
144010
6m
– T1 = Depths from 50 mm.
Connection profile 36/22
168005
6m
– Glazing class WK2-P4A (old A3).
■ Gaskets
Article
No.
PU
Gasket for pressure prof. 3 011070.LI
100 m
Gasket for pressure prof. 3 011070.RE
100 m
Compensation gasket 2
011080
100 m
Base gasket for transom
56 V with flap
153120
40 m
No.
PU
012122
100
pc(s)
012153
100
pc(s)
014036
10 pc(s)
014060
100
pc(s)
016051
10 pc(s)
152015
100
pc(s)
152075
10 pc(s)
Glass carrier 26 to 27 V
162042
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
■ Accessories
Article
Special countersunk
sheet metal screw
5.5x20
Flat fillister head screw
5.5x42
Sealing piece
for pressure profile 56
Bullet for screw heads
Crosspoint sealing plate
56
Sealing piece
for transom 56
Sealing piece
for base transom V
360
2016
HVWK-0012b
THERM+ H-V
Burglar-resistant curtain wall WK2
Timber curtain wall
Cover profile options clipped
Mullion section 56 mm
■ Technical information
■ Profiles
– Burglar-resistant curtain wall WK2 (EF1)
acc. to DIN EN 1627 (DIN V 18054).
Article
Cover profile 56/15
– Glazing class WK2-P4A (old A3).
– Slipping down of the cover profiles
must be prevented.
PU
6m
Cover profile 56/12
013024
6m
Cover profile 56/25
013025
6m
Cover profile 56/25
013400
6m
Cover profile 56/20
013410
6m
Pressure profile 53
punched
118010
6m
Cover profile 56/32
141307
6m
THERM+ H-V
Add-ons
– For more cover profiles, end caps and
belay sheet see Product range.
No.
013023
HVWK-0013
2016
361
THERM+ H-V
Burglar-resistant curtain wall WK2
Timber curtain wall
Pressure profile options visible screwed
Mullion section 56 mm
■ Technical information
■ Profiles
– Burglar-resistant curtain wall WK2 (EF1)
acc. to DIN EN 1627 (DIN V 18054).
Article
– Glazing class WK2-P4A (old A3).
– For more pressure profiles see Product range.
362
2016
HVWK-0014
No.
PU
Pressure profile 56/12
013027
6m
Pressure profile 56/9
013028
6m
Pressure profile 56/3
013310
6m
THERM+ H-V
Burglar-resistant curtain wall WK2
Timber curtain wall
Standard exterior gasket
Mullion section/transom section 76 mm
■ Technical information
■ Profiles
– Burglar-resistant curtain wall WK2 (EF1)
acc. to DIN EN 1627 (DIN V 18054).
Article
– Glazing class WK2-P4A (old A3).
– For blocking of the glass unit
see Processing.
– T1 = Depths from 50 mm.
– T17 = Depths from 80 mm.
No.
PU
Cover profile 76/15
013050
6m
Cover profile 76/20
013610
6m
Pressure profile 73 punched
118015
6m
Base profile 67 V punched
144015
6m
■ Gaskets
Article
No.
PU
Gasket for pressure prof. 3 011070.LI
100 m
Gasket for pressure prof. 3 011070.RE
100 m
Gasket for mullion 76 V
153205
40 m
Gasket for transom 76 V
153210
40 m
■ Accessories
22 - 64 mm
Special countersunk
sheet metal screw 5.5x20
Flat fillister head screw
5.5x42
Sealing piece
for pressure profile 76
No.
012122
012153
PU
100
pc(s)
100
pc(s)
014037
10 pc(s)
014060
100
pc(s)
016052
10 pc(s)
152058
100
pc(s)
Glass carrier 26 to 27 V
162042
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
Bullet for screw heads
Crosspoint sealing plate
76
Sealing piece
for transom 76 V
22 - 64 mm
HVWK-0021
2016
363
THERM+ H-V
Add-ons
Article
THERM+ H-V
Burglar-resistant curtain wall WK2
Timber curtain wall
Cover profile options clipped
Mullion section 76 mm
■ Technical information
■ Profiles
– Burglar-resistant curtain wall WK2 (EF1)
acc. to DIN EN 1627 (DIN V 18054).
Article
– Glazing class WK2-P4A (old A3).
– Slipping down of the cover profiles
must be prevented.
– For more cover profiles, end caps and
belay sheet see Product range.
364
2016
HVWK-0023
No.
PU
Cover profile 76/15
013050
6m
Cover profile 76/20
013610
6m
Cover profile 76/25
013615
6m
Pressure profile 73
punched
118015
6m
Cover profile 76/25
141505
6m
THERM+ H-V
Burglar-resistant curtain wall WK3
Timber curtain wall
Standard exterior gasket
Mullion section/transom section 50 mm
■ Technical information
■ Profiles
– Burglar-resistant curtain wall WK3 (EF1)
acc. to DIN EN 1627 (DIN V 18054).
Article
– Glazing class WK3-P6B (old B1).
– For blocking of the glass unit
see Processing.
– T1 = Depths from 50 mm.
– T17 = Depths from 80 mm.
No.
PU
Cover profile 50/15
013003
6m
Reinforcement
for pressure profile 40
013111
6m
Cover profile 50/20
013210
6m
Pressure profile 47
punched
118005
6m
Base profile 41 V punched
144005
6m
■ Gaskets
Article
No.
PU
Gasket for pressure prof. 3 011070.LI
100 m
Gasket for pressure prof. 3 011070.RE
100 m
Gasket for mullion 50 V
153005
40 m
Gasket for transom 50 V
153010
40 m
■ Accessories
Special countersunk
sheet metal screw 5.5x20
Flat fillister head screw
5.5x58
Sealing piece
for pressure profile 50
012159
10 pc(s)
014060
100
pc(s)
016050
10 pc(s)
152012
100
pc(s)
Glass carrier 32 to 33 V
162057
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
Crosspoint sealing plate
50
Sealing piece
for transom 50 V
HVWK-0031
012122
PU
100
pc(s)
100
pc(s)
014035
Bullet for screw heads
26 - 64 mm
No.
2016
365
THERM+ H-V
Add-ons
26 - 64 mm
Article
THERM+ H-V
Burglar-resistant curtain wall WK3
Timber curtain wall
Gasket for transom with flap between mullions
Transom section 50 mm
■ Technical information
■ Profiles
– Burglar-resistant curtain wall WK3 (EF1)
acc. to DIN EN 1627 (DIN V 18054).
Article
Cover profile 50/15
– Glazing class WK3-P6B (old B1).
Reinforcement
for pressure profile 40
Pressure profile 47
punched
– For blocking of the glass unit
see Processing.
– T1 = Depths from 50 mm.
Base profile 41 V punched
No.
PU
013003
6m
013111
6m
118005
6m
144005
6m
No.
PU
■ Gaskets
Article
Gasket for pressure prof. 3 011070.LI
100 m
Gasket for pressure prof. 3 011070.RE
100 m
Gasket for transom 50 V
with flap
40 m
153015
■ Accessories
Article
Special countersunk
sheet metal screw 5.5x20
Flat fillister head screw
5.5x58
Sealing piece
for pressure profile 50
Bullet for screw heads
Crosspoint sealing plate
50
Sealing piece
for transom 50
Sealing piece
for transom 50 V
26 - 64 mm
366
2016
HVWK-0032a
No.
012122
012159
PU
100
pc(s)
100
pc(s)
014035
10 pc(s)
014060
100
pc(s)
016050
10 pc(s)
152010
152012
100
pc(s)
100
pc(s)
Glass carrier 32 to 33 V
162057
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
THERM+ H-V
Burglar-resistant curtain wall WK3
Timber curtain wall
Continuous base gasket with flap
Transom section 50 mm
■ Technical information
■ Profiles
– Burglar-resistant curtain wall WK3 (EF1)
acc. to DIN EN 1627 (DIN V 18054).
Article
No.
PU
013003
6m
013111
6m
118005
6m
Base profile 41 V punched
144005
6m
Connection profile 36/22
168005
6m
Cover profile 50/15
– Glazing class WK3-P6B (old B1).
Reinforcement
for pressure profile 40
Pressure profile 47
punched
– For blocking of the glass unit
see Processing.
– T1 = Depths from 50 mm.
■ Gaskets
Article
No.
Gasket for pressure prof. 3 011070.LI
PU
100 m
Gasket for pressure prof. 3 011070.RE
100 m
Gasket for pressure prof. 8
011071
100 m
Base gasket for transom
50 V with flap
153020
40 m
■ Accessories
No.
PU
Special countersunk
sheet metal screw 5.5x20
Flat fillister head screw
5.5x58
Sealing piece
for pressure profile 50
012159
014035
10 pc(s)
Bullet for screw heads
014060
100
pc(s)
016050
10 pc(s)
152075
10 pc(s)
Glass carrier 32 to 33 V
162057
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
Crosspoint sealing plate
50
Sealing piece
for base transom V
012122
100
pc(s)
100
pc(s)
26 - 64 mm
HVWK-0032b
2016
367
THERM+ H-V
Add-ons
Article
THERM+ H-V
Burglar-resistant curtain wall WK3
Timber curtain wall
Cover profile options clipped
Mullion section 50 mm
■ Technical information
■ Profiles
– Burglar-resistant curtain wall WK3 (EF1)
acc. to DIN EN 1627 (DIN V 18054).
Article
– Glazing class WK3-P6B (old B1).
– Slipping down of the cover profiles
must be prevented.
– For more cover profiles, end caps and
belay sheet see Product range.
368
2016
HVWK-0033
No.
PU
Cover profile 50/15
013003
6m
Cover profile 50/25
013005
6m
Reinforcement
for pressure profile 40
013111
6m
Cover profile 50/25
013201
6m
Cover profile 50/20
013210
6m
Pressure profile 47
punched
118005
6m
Cover profile 50/30
141106
6m
THERM+ H-V
Burglar-resistant curtain wall WK3
Timber curtain wall
Pressure profile options visible screwed
Mullion section 50 mm
■ Technical information
■ Profiles
– Burglar-resistant curtain wall WK3 (EF1)
acc. to DIN EN 1627 (DIN V 18054).
Article
Pressure profile 50/12
– Glazing class WK3-P6B (old B1).
– For more pressure profiles see Product range.
PU
6m
Pressure profile 50/9
013008
6m
Pressure profile 50/25
013014
6m
THERM+ H-V
Add-ons
– T195 = Stainless steel flat (t = 2 mm)
own production.
No.
013007
HVWK-0034
2016
369
THERM+ H-V
Burglar-resistant curtain wall WK3
Timber curtain wall
Standard exterior gasket
Mullion section/transom section 56 mm
■ Technical information
■ Profiles
– Burglar-resistant curtain wall WK3 (EF1)
acc. to DIN EN 1627 (DIN V 18054).
Article
– Glazing class WK3-P6B (old B1).
– For blocking of the glass unit
see Processing.
– T1 = Depths from 50 mm.
– T17 = Depths from 80 mm.
No.
PU
Cover profile 56/15
013023
6m
Reinforcement
for pressure profile 40
013111
6m
Cover profile 56/20
013410
6m
Pressure profile 53
punched
118010
6m
Base profile 47 V punched
144010
6m
■ Gaskets
Article
No.
PU
Gasket for pressure prof. 3 011070.LI
100 m
Gasket for pressure prof. 3 011070.RE
100 m
Gasket for mullion 56 V
153105
40 m
Gasket for transom 56 V
153110
40 m
■ Accessories
26 - 64 mm
Article
Special countersunk
sheet metal screw 5.5x20
Flat fillister head screw
5.5x58
Sealing piece
for pressure profile 56
2016
HVWK-0041
012159
10 pc(s)
014060
100
pc(s)
016051
10 pc(s)
152017
100
pc(s)
Glass carrier 32 to 33 V
162057
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
Crosspoint sealing plate
56
Sealing piece
for transom 56 V
370
012122
PU
100
pc(s)
100
pc(s)
014036
Bullet for screw heads
26 - 64 mm
No.
THERM+ H-V
Burglar-resistant curtain wall WK3
Timber curtain wall
Gasket for transom with flap between mullions
Transom section 56 mm
■ Technical information
■ Profiles
– Burglar-resistant curtain wall WK3 (EF1)
acc. to DIN EN 1627 (DIN V 18054).
Article
Cover profile 56/15
– Glazing class WK3-P6B (old B1).
Reinforcement
for pressure profile 40
Pressure profile 53
punched
– For blocking of the glass unit
see Processing.
– T1 = Depths from 50 mm.
Base profile 47 V punched
No.
PU
013023
6m
013111
6m
118010
6m
144010
6m
No.
PU
■ Gaskets
Article
Gasket for pressure prof. 3 011070.LI
100 m
Gasket for pressure prof. 3 011070.RE
100 m
Gasket for transom 56 V
with flap
40 m
153115
■ Accessories
PU
012159
014036
10 pc(s)
Bullet for screw heads
014060
100
pc(s)
016051
10 pc(s)
152017
100
pc(s)
Glass carrier 32 to 33 V
162057
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
Crosspoint sealing plate
56
Sealing piece
for transom 56 V
HVWK-0042a
No.
Special countersunk
sheet metal screw 5.5x20
Flat fillister head screw
5.5x58
Sealing piece
for pressure profile 56
012122
2016
100
pc(s)
100
pc(s)
371
THERM+ H-V
Add-ons
Article
THERM+ H-V
Burglar-resistant curtain wall WK3
Timber curtain wall
Continuous base gasket with flap
Transom section 56 mm
■ Technical information
■ Profiles
– Burglar-resistant curtain wall WK3 (EF1)
acc. to DIN EN 1627 (DIN V 18054).
Article
No.
PU
013023
6m
013111
6m
118010
6m
Base profile 47 V punched
144010
6m
Connection profile 36/22
168005
6m
Cover profile 56/15
– Glazing class WK3-P6B (old B1).
Reinforcement
for pressure profile 40
Pressure profile 53
punched
– For blocking of the glass unit
see Processing.
– T1 = Depths from 50 mm.
■ Gaskets
Article
No.
PU
Gasket for pressure prof. 3 011070.LI
100 m
Gasket for pressure prof. 3 011070.RE
100 m
Gasket for pressure prof. 8
011071
100 m
Base gasket for transom
56 V with flap
153120
40 m
■ Accessories
Article
Special countersunk
sheet metal screw 5.5x20
Flat fillister head screw
5.5x58
Sealing piece
for pressure profile 56
HVWK-0042b
012159
10 pc(s)
014060
100
pc(s)
016051
10 pc(s)
152075
10 pc(s)
Glass carrier 32 to 33 V
162057
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
Crosspoint sealing plate
56
Sealing piece for base
transom V
2016
012122
PU
100
pc(s)
100
pc(s)
014036
Bullet for screw heads
372
No.
THERM+ H-V
Burglar-resistant curtain wall WK3
Timber curtain wall
Cover profile options clipable
Mullion section 56 mm
■ Technical information
■ Profiles
– Burglar-resistant curtain wall WK3 (EF1)
acc. to DIN EN 1627 (DIN V 18054).
Article
– Glazing class WK3-P6B (old B1).
– Slipping down of the cover profiles
must be prevented.
PU
013023
6m
Cover profile 56/25
013025
6m
Reinforcement
for pressure profile 40
013111
6m
Cover profile 56/25
013400
6m
Cover profile 56/20
013410
6m
Pressure profile 53
punched
118010
6m
Cover profile 56/32
141307
6m
THERM+ H-V
Add-ons
– For more cover profiles, end caps and
belay sheet see Product range.
No.
Cover profile 56/15
HVWK-0043
2016
373
THERM+ H-V
Burglar-resistant curtain wall WK3
Timber curtain wall
Pressure profile options visible screwed
Mullion section 56 mm
■ Technical information
■ Profiles
– Burglar-resistant curtain wall WK3 (EF1)
acc. to DIN EN 1627 (DIN V 18054).
Article
– Glazing class WK3-P6B (old B1).
– T195 = Stainless steel flat (t = 2 mm)
own production.
374
2016
HVWK-0044
No.
PU
Pressure profile 56/12
013027
6m
Pressure profile 56/9
013028
6m
THERM+ H-V
Burglar-resistant curtain wall WK3
Timber curtain wall
Standard exterior gasket
Mullion section/transom section 76 mm
■ Technical information
■ Profiles
– Burglar-resistant curtain wall WK3 (EF1)
acc. to DIN EN 1627 (DIN V 18054).
Article
– Glazing class WK3-P6B (old B1).
– For blocking of the glass unit
see Processing.
– T17 = Depths from 80 mm.
– T19 = Depths from 60 mm.
– T195 = Stainless steel flat (t = 2 mm)
own production.
No.
PU
Cover profile 76/15
013050
6m
Cover profile 76/20
013610
6m
Pressure profile 73
punched
118015
6m
Base profile 67 V punched
144015
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
Gasket for mullion 76 V
153205
40 m
Gasket for transom 76 V
153210
40 m
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
■ Accessories
26 - 64 mm
Special countersunk
sheet metal screw 5.5x20
Flat fillister head screw
5.5x58
Sealing piece
for pressure profile 76
No.
012122
012159
PU
100
pc(s)
100
pc(s)
014037
10 pc(s)
014060
100
pc(s)
016052
10 pc(s)
152058
100
pc(s)
Glass carrier 32 to 33 V
162057
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
Bullet for screw heads
Crosspoint sealing plate
76
Sealing piece
for transom 76 V
26 - 64 mm
HVWK-0051
2016
375
THERM+ H-V
Add-ons
Article
THERM+ H-V
Burglar-resistant curtain wall WK3
Timber curtain wall
Cover profile options clipable
Mullion section 76 mm
■ Technical information
■ Profiles
– Burglar-resistant curtain wall WK3 (EF1)
acc. to DIN EN 1627 (DIN V 18054).
Article
No.
PU
Cover profile 76/15
013050
6m
Cover profile 76/20
013610
6m
Cover profile 76/25
013615
6m
– For more cover profiles, end caps and
belay sheet see Product range.
Pressure profile 73
punched
118015
6m
– T195 = Stainless steel flat (t = 2 mm)
own production.
Cover profile 76/25
141505
6m
– Glazing class WK3-P6B (old B1).
– Slipping down of the cover profiles
must be prevented.
376
2016
HVWK-0053
THERM+ H-V
Burglar-resistant curtain-wall WK2
Timber curtain wall 50/56/76 mm
Screw selection
Pressure/cover profiles with exterior gasket 3 mm
– For pressure profile no. 013007,
013027.
– For pressure profile no. 013014,
013008, 013028.
– Accessories:
Bullet for screw heads no. 014060.
– Accessories:
Bullet for screw heads no. 014060.
– Accessories:
Bullet for screw heads no. 014060.
THERM+ H-V
Add-ons
– For pressure profile no. 118005,
118010, 118015.
Infill thickness
mm
10 – 11
12 – 13
14 – 15
16 – 18
19 – 21
22 – 23
24 – 25
26 – 28
29 – 31
32 – 33
34 – 35
36 – 38
39 – 41
42 – 43
44 – 45
46 – 48
49 – 51
52 – 53
54 – 55
56 – 58
59 – 61
62 – 63
64
No.
012101
012098
012168
012150
012151
012152
012090
012153
012154
012155
012156
012157
012158
012159
012160
012161
012162
012163
012164
012165
012166
012145
012167
Length
mm
25
28
30
32
35
38
40
42
45
48
50
52
55
58
60
62
65
68
70
72
75
78
80
Infill thickness
mm
10
11 – 13
14 – 16
17 – 18
19 – 20
21 – 23
24 – 26
27 – 28
29 – 30
31 – 33
34 – 36
37 – 38
39 – 40
41 – 43
44 – 46
47 – 48
49 – 50
51 – 53
54 – 56
57 – 58
59 – 60
61 – 63
64
No.
012138
012010
012011
012012
012139
012013
012014
012140
012015
012141
012016
012142
012017
012143
012018
012020
012146
012147
012148
012260
012149
012261
012262
KHV-0043
Length
mm
30
32
35
38
40
42
45
48
50
52
55
58
60
62
65
68
70
72
75
78
80
82
85
Infill thickness
mm
10 – 11
12 – 13
14 – 15
16 – 18
19 – 21
22 – 23
24 – 25
26 – 28
29 – 31
32 – 33
34 – 35
36 – 38
39 – 41
42 – 43
44 – 45
46 – 48
49 – 51
52 – 53
54 – 55
56 – 58
59 – 61
62 – 63
64
No.
012137
012138
012010
012011
012012
012139
012013
012014
012140
012015
012141
012016
012142
012017
012143
012018
012020
012146
012147
012148
012260
012149
012261
2016
Length
mm
28
30
32
35
38
40
42
45
48
50
52
55
58
60
62
65
68
70
72
75
78
80
82
377
THERM+ H-V
Burglar-resistant curtain wall WK2
Timber curtain wall 50/56/76 mm
Screw selection
Flat pressure profile with exterior gasket 2 mm
– For pressure profile no. 013300,
013310.
– Accessories:
Bullet for screw heads no. 014060.
Infill thickness
mm
22
23 – 25
26 – 28
29 – 30
31 – 32
33 – 35
36 – 38
39 – 40
41 – 42
43 – 45
46 – 48
49 – 50
51 – 52
53 – 55
56 – 58
59 – 60
61 – 62
63 – 64
378
2016
No.
012138
012010
012011
012012
012139
012013
012014
012140
012015
012141
012016
012142
012017
012143
012018
012020
012146
012147
Length
mm
30
32
35
38
40
42
45
48
50
52
55
58
60
62
65
68
70
72
KHV-0061
THERM+ H-V
Burglar-resistant curtain wall WK3
Timber curtain wall 50/56/76 mm
Screw selection
Pressure/cover profiles with exterior gasket 3 mm
– For pressure profile no. 013007,
013027.
– For pressure profile no. 013014,
013008, 013028.
– Accessories:
Bullet for screw heads no. 014060.
– Accessories:
Bullet for screw heads no. 014060.
– Accessories:
Bullet for screw heads no. 014060.
THERM+ H-V
Add-ons
– For pressure profile no. 118005,
118010, 118015.
Infill thickness
mm
10
11 to 13
14 to 15
16 to 17
18 to 20
21 to 23
24 to 25
26 to 27
28 to 30
31 to 33
34 to 35
36 to 37
38 to 40
41 to 43
44 to 45
46 to 47
48 to 50
51 to 53
54 to 55
56 to 57
58 to 60
61 to 63
64
No.
012151
012152
012090
012153
012154
012155
012156
012157
012158
012159
012160
012161
012162
012163
012164
012165
012166
012145
012167
012275
012276
012277
012279
Length
mm
35
38
40
42
45
48
50
52
55
58
60
62
65
68
70
72
75
78
80
82
85
88
92
Infill thickness
mm
10 to 11
12 to 14
15 to 17
18 to 19
20 to 21
22 to 24
25 to 27
28 to 29
30 to 31
32 to 34
35 to 37
38 to 39
40 to 41
42 to 44
45 to 47
48 to 49
50 to 51
52 to 54
55 to 57
58 to 59
60 to 61
62 to 64
No.
012013
012014
012140
012050
012141
012016
012142
012017
012143
012018
012020
012146
012147
012148
012260
012149
012261
012262
012265
012266
012267
012268
KHV-0044
Length
mm
42
45
48
50
52
55
58
60
62
65
68
70
72
75
78
80
82
85
88
90
92
95
Infill thickness
mm
10
11 to 12
13 to 14
15 to 17
18 to 20
21 to 22
23 to 24
25 to 27
28 to 30
31 to 32
33 to 34
35 to 37
38 to 40
41 to 42
43 to 44
45 to 47
48 to 50
51 to 52
53 to 54
55 to 57
58 to 60
61 to 62
63 to 64
No.
012012
012139
012013
012014
012140
012015
012141
012016
012142
012017
012143
012018
012020
012146
012147
012148
012260
012149
012261
012262
012265
012266
012267
2016
Length
mm
38
40
42
45
48
50
52
55
58
60
62
65
68
70
72
75
78
80
82
85
88
90
92
379
380
2016
THERM+ H-V
Burglar-resistant curtain wall WK3
Timber curtain wall 50/56 mm
SG2 curtain wall – Technology in detail
■ Features SG2-system
– Free choise of support construction made of aluminium,
steel or timber.
– System widths 50 and 56 mm.
– Combination possible with THERM+ basic system.
– Support- and basic construction as well as the interior
gasket system are identical to the THERM+ basic system.
– Variable capabilities.
– Slim elevation widths.
– Homogeneous, building enveloping glass area.
– Maximum possible transparency.
– Many application possibilities.
– Approved curtain wall system.
– Infill thicknesses of 32 up to 64 mm.
THERM+ H-V
Add-ons
– Simple and efficient assembly.
SHV-0004
2016
381
382
2016
THERM+ H-V
Structural glazing SG2
Timber curtain wall
Structural glazing curtain wall SG2
Mullion section/transom section 50 mm
■ Technical information
■ Profiles
– The indications in chapter Technical
execution and installation must be
respected.
Article
No.
PU
U-profile
034052
3m
– Glass bite 13 mm.
Base profile 41 V punched
144005
6m
– T1 = Depths from 50 mm.
■ Gaskets
Article
No.
PU
Gasket for mullion 50 V
153005
40 m
Gasket for transom 50 V
153010
40 m
Insulating block SG
25/16
168552
50 m
No.
PU
■ Accessories
Article
Flat fillister head screw
5.5x20
Pan head tapping screw
5.5x25
Sealing piece for transom 50 V
HVSG-0001
100
pc(s)
100
pc(s)
100
pc(s)
012099
012107
152012
164610
10 pc(s)
Glass carrier 27 to 28 V
167342
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
2016
THERM+ H-V
Add-ons
Toggle 20/58 SG
383
THERM+ H-V
Structural glazing SG2
Timber curtain wall
Structural glazing curtain wall SG2
Mullion section/transom section 56 mm
■ Technical information
■ Profiles
– The indications in chapter Technical
execution and installation must be
respected.
Article
No.
PU
U-profile
034052
3m
– Glass bite 16 mm.
Base profile 47 V punched
144010
6m
– T1 = Depths from 50 mm.
■ Gaskets
Article
No.
PU
Gasket for mullion 56 V
153105
40 m
Gasket for transom 56 V
153110
40 m
Insulating block SG
25/16
168552
50 m
No.
PU
■ Accessories
Article
Flat fillister head screw
5.5x20
Pan head tapping screw
5.5x25
Sealing piece for transom 56
384
2016
HSG-0002
012099
012107
152015
100
pc(s)
100
pc(s)
100
pc(s)
Toggle 20/58 SG
164610
10 pc(s)
Glass carrier 27 to 28 V
167342
10 pc(s)
Special timber screw
4.5x35
908020
100
pc(s)
THERM+ H-V
Structural glazing SG2
Timber curtain wall 50/56 mm
Wall connection structural glazing SG2 with thermal insulation system
■ Technical information
– Approval required in individual cases.
THERM+ H-V
Add-ons
– T129 = Vapour-tight membrane no. 951019.
HI-0032
2016
385
THERM+ H-V
Structural glazing SG2
Timber curtain wall 50/56 mm
Exterior sealing system
■ Technical information
– T30 = Notching.
– T31 = Width of glass joint 24 mm.
– T142 = Screwing in of the SG toggle
with tool no. 170750.
386
2016
KHV-0204
THERM+ H-V
Structural glazing SG2
Timber curtain wall
Exterior sealing system – Cutting and draw off dimensions
System width 50 mm
■ Technical information
T67
– RB = Grid width
RH = Grid height.
– T58 = Length of the gasket for transom
= RB - 28 + 0.5% add-on.
– T66 = Length of the base profile = RB - 56.
– T67 = Glass dimension = RB or RH - 24.
T58
THERM+ H-V
Add-ons
T66
KHV-0803
2016
387
THERM+ H-V
Structural glazing SG2
Timber curtain wall
Exterior sealing system – Cutting and draw off dimensions
System width 56 mm
■ Technical information
T67
– RB = Grid width
RH = Grid height.
– T65 = Length of the gasket for transom
= RB - 34 + 0.5%.
– T67 = Glass dimension = RB or RH - 24.
– T91 = Length of the base profile = RB - 62.
T65
T91
388
2016
KHV-0804
THERM+ H-V
Structural glazing SG2
Timber curtain wall 50/56 mm
Screw selection
Glazing with silicone joint and glazing shim and SG toggle
THERM+ H-V
Add-ons
– Screw selection tables apply only for a cavity
of 18 mm between the glass panes (glass edge)
and a centric position of the aluminium U profile
no. 034052 in the glass edge.
Interior pane
thickness
mm
6 to 7
No.
Length
mm
012107
25
8 to 9
012108
28
10 to 11
012109
30
12 to 14
012110
32
15 to 17
012111
35
18 to 19
012112
38
20 to 21
012113
40
22 to 24
012114
42
25 to 27
012115
45
28 to 29
012116
48
30 to 31
012117
50
32 to 34
012118
52
35 to 37
012119
55
38
012129
58
KHV-0063
2016
389
THERM+ H-V
Structural glazing SG2
Timber curtain wall 50/56 mm
Selection insulating block
– The outer pane must be in tempered glass
with min. 8 mm thickness.
– A silicone joint width of 8 to 9 mm results by using
this table, exept for an infill thickness of 22 mm.
In that case the silicone joint width is 10 mm.
– From an infill thickness of 32 mm with aluminium
U profile no. 034052 possible.
Infill thickness
mm
20 to 22
168541
23 to 24
168544
25 to 26
168546
27 to 28
168548
29 to 30
168550
31 to 32
168552
33 to 34
168554
35 to 36
168556
37 to 38
168558
39 to 40
168560
41 to 42
168562
43 to 44
168564
45 to 46
168566
47 to 48
168568
49 to 50
168570
51 to 52
168572
53 to 54
168564 + 168546
390
No.
55 to 56
2x 168556
57 to 58
168568 + 168546
59 to 60
2x 168558
61 to 62
168572 + 168546
63 to 64
2x 168560
2016
KHV-0205
THERM+ H-V
Structural glazing SG2
Timber curtain wall 50/56 mm
Selection glass carriers
– The outer pane must be in tempered glass
with min. 8 mm thickness.
– Bearing surface of the outer pane on the glass carrier:
min. 50 % of the glass thickness + 1 mm.
THERM+ H-V
Add-ons
– Screw connection of the glass carrier
(length 100 mm) with 3 flat fillister head screws
no. 012099 each (PU = 100 pc(s).
Infill thickness
mm
20
21 to 22
23 to 24
25 to 26
27 to 28
29 to 30
31 to 32
33 to 34
35 to 36
37 to 38
39 to 40
41 to 42
43 to 44
45 to 46
47 to 48
49 to 50
51 to 52
53 to 54
55 to 56
57 to 58
59 to 60
61 to 62
63 to 64
No.
Article
PU
167312
167317
167322
167327
167332
167337
167342
167347
167352
167357
167362
167367
167372
167377
167382
167387
167392
167397
167402
167907
167912
167917
167922
Glass carrier 15 to 16 V
Glass carrier 17 to 18 V
Glass carrier 19 to 20 V
Glass carrier 21 to 22 V
Glass carrier 23 to 24 V
Glass carrier 25 to 26 V
Glass carrier 27 to 28 V
Glass carrier 29 to 30 V
Glass carrier 31 to 32 V
Glass carrier 33 to 34 V
Glass carrier 35 to 36 V
Glass carrier 37 to 38 V
Glass carrier 39 to 40 V
Glass carrier 41 to 42 V
Glass carrier 43 to 44 V
Glass carrier 45 to 46 V
Glass carrier 47 to 48 V
Glass carrier 49 to 50 V
Glass carrier 51 to 52 V
Glass carrier 53 to 54 V
Glass carrier 55 to 56 V
Glass carrier 57 to 58 V
Glass carrier 59 to 60 V
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
10 pc(s)
KHV-0011
2016
391
THERM+ H-V
Structural glazing SG2
Timber curtain wall 50/56 mm
Glazing with suction discs
■ Technical information
– For additional mechanical saving for all
heights larger than 8 m.
Suction disc set 75
No. 163807
392
2016
Suction disc set 50/90
No. 163810
Suction disc set 56/90
No. 163812
HVSG-0003
THERM+ H-V
Structural glazing SG2
Timber curtain wall 50/56 mm
Assembly interior gasket and suction disc
■ Technical information
– T164 = Built-in conditions.
– T170 = Assembly suction disc.
– T171 = Suction disc variants.
– T172 = Suction disc set.
THERM+ H-V
Add-ons
– T201 = Assembly aid no. 015230.
T172 50/90
No. 163810
T172 56/90
No. 163812
T172 75
No. 163807
Z.-Nr. KHV-0014
2016
393
THERM+ H-V
Structural glazing SG2
Timber curtain wall 50/56 mm
Technical execution and installation
Indications for the execution of silicone joints
SG-curtain walls with silicone joint
on four sides
■
Technical information
– In the curtain wall THERM+ SG2 the glass units are fixed
by means of aluminium toggles SG no. 164610.
The quantity of the toggles and the structural values of the
bonding must be determined by an approved specialist,
taking into consideration the maximum distance of
500 mm between two toggles.
– The national building regulations and codes must be
applied. A permit may be required for the particular
project. If an additional mechanical fuxture is required,
RAICO suction discs can be applied (see Product range)
– For assembly and installation the RAICO assembly
instructions must be followed. For the silicone joint the
indications of the manufacturer of the sealant must be
respected in terms of adhesion on the glass edge and
chemical interaction with the glass edge sealant.
Insulated glass units must feature a UV-resistant glass
edge sealant. The necessary glass quality and thickness
must be coordinated with the glass supplier.
– The silicone joint must be at least 8 mm. The exterior
glass pane must be made of tempered glass with heat
soak test with a minimum thickness of 8 mm. The cavity
between the glass panes (glass edge) must be min.
18 mm, the interior glass pane min. 6 mm.
– Glass tolerances:
– The total tolerances of the glass units must be limited to
+/- 2 mm. The panes must be produced on the standing
edge.
394
2016
SG-curtain walls with silicone joint on two
sides and pressure profile on two sides
■
Technical information
– In case of silicone joints on two sides of a glass unit, this
must be fixed additionally with suction discs (see Product
range) with at least one screw (diameter 5.5) in
distances of max. 500 mm. The bearing surface of the
suction discs must be min. 1,000 mm2 per glass unit. The
aluminium disc must be underlaid with a weatherproof
silicone disc (60 to 70 shore). As an alternative the glass
unit can be fixed with special toggles in the glass edge,
see system THERM+ SG2.
– The backing for the exerior silicone joint must be executed
with the insulation block SG (height according to the infill
thickness). The silicone joint must be at least 8 mm. The
material must be suitable for weatherproof sealing
between glass units. Possible chemical interactions with
the sealant of the glass edge and, in case of laminated
glass, with the interlayer must be coordinated with the
suppliers. The instructions of the manufacturers of these
materials must be applied.
If exterior silicone joints get in contact with pressure
profiles, a RAICO silicone pressure profile gasket (see
product range), must be used. Penetrations in the silicone
joint must be sealed with the same material. If screws
without washer are used for the suctions discs, the screw
heads must be sealed with the material of the silicone
joints.
– Introduction:
– Seam the exterior glass verge.
+ H-V
THERM
Content
Connector technology
Assembly options
396
402
408
410
Glazing/Sealing technology
Load transmission
Assembly and installation cross point glass carriers
Interior sealing system
Exterior sealing system
Screw selection
423
426
428
439
449
Accessories
Fixation for sun protection systems
Installation scaffolding anchor
Installation fixture unit
Connection profiles
Suction discs
Belay sheet
Statics
453
470
471
472
482
483
484
THERM+ H-V
Assembly options
Connector technology
TC timber connector SOLO
TC timber connector KOMBI
TC timber connector with expansion mullion
Statics
2016
395
THERM+ H-V
Connector technology
Timber façade THERM+ H-V 50/56/76 mm
TC timber connector SOLO
Two-sided connection
■ Technical information
– Technical information and options tables,
see next page.
– T77 = Base profile length
– T78 = Transom length
– T79 = Machined recess 17.5 x 30 mm
– T80 = Special nail screw
– T82 = Mullion element
– T84 = Special end grain screw
– T85 = Longitudinal stop
– T86 = Transom element
– T225 = Threaded sleeve no. 160406
– T226 = Screw sleeve no. 160405
– T227 = Cylinder screw
396
2016
KHV-0620
THERM+ H-V
Connector technology
Timber façade THERM+ H-V 50/56/76 mm
TC timber connector SOLO
Two-sided connection
■ Technical information
– The transom dimensions should be calculated according to the
DIN EN 13830 product standard to max. 3 mm deflection in the direction
of the glass load.
– The finished connection is suitable only for F1, F23 and F45 loads
(see chapter Dimensioning). The connector should be appropriately
protected against distortion.
– The glass load specifications refer to theoretical maximum glass loads
without taking into consideration wind loads, stanchion loads or additional
loads. In the case of load case combinations, this load is reduced
depending on the size and influence surface. The basis for determining
these glass loads is the characteristic load-bearing capacity of the
connector see ETA-13/0765 taking into account the following factors:
- Gross density wood/wood-based materials б > 350 kg/m³
- Modification coefficient for load effect duration
and moisture content kmod = 0.6
- Partial safety factor laminated timber уM = 1.30
- Partial safety factor for effect уG = 1.35
These factors can vary. The connection must be dimensioned
based on the Eurocodes as well as the ETA-13/0765.
– Connector set consists of:
- Mullion element
- Transom element
- Longitudinal stop
Screws, screw sleeves and threaded sleeves must be ordered separately.
Transom
depth
mm
Max. glass
weight
kg
60 to 79
80 to 99
100 to 119
120 to 159
160 to 199
200 to 239
240 to 300
116
138
162
182
218
250
276
TC timber connector
PU: 10 pc(s)
No.
161302
161307
161312
161317
161322
161327
161332
Set
60
80
100
120
160
200
240
Qty.
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
Nail screw
PU: 100 pc(s)
No.
908554
908555
908556
908557
908558
908559
908560
Qty.
4 pc(s)
4 pc(s)
4 pc(s)
4 pc(s)
4 pc(s)
4 pc(s)
4 pc(s)
End grain
Screw sleeve
screw
no. 908550
no. 160405
PU: 100 pc(s) PU: 100 pc(s)
Qty.
Qty.
4 pc(s)
2 pc(s)
6 pc(s)
3 pc(s)
6 pc(s)
3 pc(s)
8 pc(s)
3 pc(s)
8 pc(s)
3 pc(s)
10 pc(s)
4 pc(s)
10 pc(s)
4 pc(s)
Threaded
sleeve
no. 160406
PU: 100 pc(s)
Qty.
2 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
4 pc(s)
4 pc(s)
■ Cylinder head screw selection
Cylinder head
Timber
screw
mullion width PU: 100 pc(s)
mm
No.
50 to 58
905552
59 to 68
905562
69 to 78
905572
79 to 88
905582
89 to 98
905592
Screw quantity depends on the transom depth
mm
60 to 79
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
80 to 99
3 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
100 to 119
3 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
120 to 159
3 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
160 to 199
3 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
200 to 239
4 pc(s)
4 pc(s)
4 pc(s)
4 pc(s)
4 pc(s)
240 to 300
4 pc(s)
4 pc(s)
4 pc(s)
4 pc(s)
4 pc(s)
2016
397
THERM+ H-V
Assembly options
■ SOLO two-sided connection selection and accessories
THERM+ H-V
Connector technology
Timber façade THERM+ H-V 50/56/76 mm
TC timber connector SOLO
One-sided connection variant 1
■ Technical information
– Technical information and options tables,
see next page.
– T77 = Base profile length
– T78 = Transom length
– T79 = Machined recess 17.5 x 30 mm
– T80 = Special nail screw
– T82 = Mullion element
– T84 = Special end grain screw
– T85 = Longitudinal stop
– T86 = Transom element
– T226 = Screw sleeve no. 160405
– T228 = Special timber screw no. 908545
398
2016
KHV-0621
THERM+ H-V
Connector technology
Timber façade THERM+ H-V 50/56/76 mm
TC timber connector SOLO
One-sided connection variant 1
■ Technical information
– The transom dimensions should be calculated according to the
DIN EN 13830 product standard to max. 3 mm deflection in the direction
of the glass load.
– The finished connection is suitable only for F1, F23 and F45 loads
(see chapter Dimensioning). The connector should be appropriately
protected against distortion.
– The glass load specifications refer to theoretical maximum glass loads
without taking into consideration wind loads, stanchion loads or additional
loads. In the case of load case combinations, this load is reduced
depending on the size and influence surface. The basis for determining
these glass loads is the characteristic load-bearing capacity of the
connector see ETA-13/0765 taking into account the following factors:
- Gross density wood/wood-based materials б > 350 kg/m³
- Modification coefficient for load effect duration
and moisture content kmod = 0.6
- Partial safety factor laminated timber уM = 1.30
- Partial safety factor for effect уG = 1.35
These factors can vary. The connection must be dimensioned
based on the Eurocodes as well as the ETA-13/0765.
– Connector set consists of:
- Mullion element
- Transom element
- Longitudinal stop
Screws, screw sleeves and threaded sleeves must be ordered separately.
Transom
depth
mm
Max. glass
weight
kg
60 to 79
80 to 99
100 to 119
120 to 159
160 to 199
200 to 239
240 to 300
116
138
162
182
218
250
276
TC timber connector
PU: 10 pc(s)
No.
161302
161307
161312
161317
161322
161327
161332
Set
60
80
100
120
160
200
240
Qty.
1 pc(s)
1 pc(s)
1 pc(s)
1 pc(s)
1 pc(s)
1 pc(s)
1 pc(s)
Nail screw
PU: 100 pc(s)
No.
908554
908555
908556
908557
908558
908559
908560
Qty.
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
End grain
Screw sleeve Special timber
screw
screw
no. 908550
no. 160405
no. 908545
PU: 100 pc(s) PU: 100 pc(s) PU: 100 pc(s)
Qty.
Qty.
Qty.
2 pc(s)
2 pc(s)
2 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
4 pc(s)
3 pc(s)
3 pc(s)
4 pc(s)
3 pc(s)
3 pc(s)
5 pc(s)
4 pc(s)
4 pc(s)
5 pc(s)
4 pc(s)
4 pc(s)
2016
399
THERM+ H-V
Assembly options
■ SOLO one-sided connection variant 1, selection and accessories
THERM+ H-V
Connector technology
Timber façade THERM+ H-V 50/56/76 mm
TC timber connector SOLO
One-sided connection variant 2
■ Technical information
– Technical information and options tables,
see next page.
– T77 = Base profile length
– T78 = Transom length
– T79 = Machined recess 17.5 x 30 mm
– T80 = Special nail screw
– T82 = Mullion element
– T84 = Special end grain screw
– T85 = Longitudinal stop
– T86 = Transom element
– T226 = Screw sleeve no. 160405
– T227 = Cylinder screw
– T229 = M6 nut (customer provision)
– T230 = Counter plate (self-made)
400
2016
KHV-0622
THERM+ H-V
Connector technology
Timber façade THERM+ H-V 50/56/76 mm
TC timber connector SOLO
One-sided connection variant 2
■ Technical information
– The transom dimensions should be calculated according to the
DIN EN 13830 product standard to max. 3 mm deflection in the direction
of the glass load.
– The finished connection is suitable only for F1, F23 and F45 loads
(see chapter Dimensioning). The connector should be appropriately
protected against distortion.
– The glass load specifications refer to theoretical maximum glass loads
without taking into consideration wind loads, stanchion loads or additional
loads. In the case of load case combinations, this load is reduced
depending on the size and influence surface. The basis for determining
these glass loads is the characteristic load-bearing capacity of the
connector see ETA-13/0765 taking into account the following factors:
- Gross density wood/wood-based materials б > 350 kg/m³
- Modification coefficient for load effect duration
and moisture content kmod = 0.6
- Partial safety factor laminated timber уM = 1.30
- Partial safety factor for effect уG = 1.35
These factors can vary. The connection must be dimensioned
based on the Eurocodes as well as the ETA-13/0765.
– Connector set consists of:
- Mullion element
- Transom element
- Longitudinal stop
Screws, screw sleeves and threaded sleeves must be ordered separately.
■ SOLO one-sided connection variant 2, selection and accessories
Max. glass
weight
kg
60 to 79
80 to 99
100 to 119
120 to 159
160 to 199
200 to 239
240 to 300
116
138
162
182
218
250
276
TC timber connector
PU: 10 pc(s)
No.
161302
161307
161312
161317
161322
161327
161332
Set
60
80
100
120
160
200
240
Qty.
1 pc(s)
1 pc(s)
1 pc(s)
1 pc(s)
1 pc(s)
1 pc(s)
1 pc(s)
Nail screw
PU: 100 pc(s)
No.
908554
908555
908556
908557
908558
908559
908560
Qty.
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
End grain
Screw sleeve
screw
no. 908550
no. 160405
PU: 100 pc(s) PU: 100 pc(s)
Qty.
Qty.
2 pc(s)
2 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
4 pc(s)
3 pc(s)
4 pc(s)
3 pc(s)
5 pc(s)
4 pc(s)
5 pc(s)
4 pc(s)
Length of
counter plate
mm
45
63
83
103
143
183
223
THERM+ H-V
Assembly options
Transom
depth
mm
■ Cylinder head screw selection
Cylinder
Timber
head screw
mullion width PU: 100 pc(s)
mm
No.
50 to 58
905572
59 to 68
905582
69 to 78
905592
79 to 88
905602
89 to 98
905612
Screw quantity depends on the transom depth
mm
60 to 79
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
80 to 99
3 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
100 to 119
3 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
120 to 159
3 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
160 to 199
3 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
200 to 239
4 pc(s)
4 pc(s)
4 pc(s)
4 pc(s)
4 pc(s)
240 to 300
4 pc(s)
4 pc(s)
4 pc(s)
4 pc(s)
4 pc(s)
2016
401
THERM+ H-V
Connector technology
Timber façade THERM+ H-V 50/56/76 mm
TC timber connector KOMBI
Two-sided connection
■ Technical information
– Technical information and options tables,
see next page.
– T78 = Transom length
– T79 = Machined recess 17.5 x 30 mm
– T80 = Special nail screw
– T82 = Mullion element
– T84 = Special end grain screw
– T85 = Longitudinal stop
– T86 = Transom element
– T87 = "KOMBI" base profile
– T225 = Threaded sleeve no. 160406
– T227 = Cylinder screw
402
2016
KHV-0623
THERM+ H-V
Connector technology
Timber façade THERM+ H-V 50/56/76 mm
TC timber connector KOMBI
Two-sided connection
■ Technical information
– The transom dimensions should be calculated according to the DIN EN 13830
product standard to max. 3 mm deflection in the direction of the glass load.
– The finished connection is suitable only for F1, F23 and F45 loads (see chapter Dimensioning).
The connector should be appropriately protected against distortion.
– The glass load specifications refer to theoretical maximum glass loads without taking into
consideration wind loads, stanchion loads or additional loads. In the case of load case
combinations, this load is reduced depending on the size and influence surface. The basis
for determining these glass loads is the characteristic load-bearing capacity of the connector
see ETA-13/0765 taking into account the following factors:
- Gross density wood/wood-based materials б > 350 kg/m³
- Modification coefficient for load effect duration and moisture content kmod = 0.6
- Partial safety factor laminated timber уM = 1.30
- Partial safety factor for effect уG = 1.35
These factors can vary. The connection must be dimensioned based on the
Eurocodes as well as the ETA-13/0765.
– Connector set consists of:
- Mullion element
- Transom element
- Longitudinal stop
Screws, screw sleeves and threaded sleeves must be ordered separately.
Transom
depth
mm
Max. glass
weight
kg
60 to 79
80 to 99
100 to 119
120 to 159
160 to 199
200 to 239
240 to 300
253
274
367
387
423
455
481
TC timber connector
PU: 10 pc(s)
No.
161302
161307
161312
161317
161322
161327
161332
Set
60
80
100
120
160
200
240
Nail screw
PU: 100 pc(s)
Qty.
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
No.
908554
908555
908556
908557
908558
908559
908560
Qty.
4 pc(s)
4 pc(s)
4 pc(s)
4 pc(s)
4 pc(s)
4 pc(s)
4 pc(s)
End grain
Screw sleeve
screw
no. 908550
no. 160405
PU: 100 pc(s) PU: 100 pc(s)
Qty.
Qty.
4 pc(s)
2 pc(s)
6 pc(s)
3 pc(s)
6 pc(s)
3 pc(s)
8 pc(s)
3 pc(s)
8 pc(s)
3 pc(s)
10 pc(s)
4 pc(s)
10 pc(s)
4 pc(s)
Threaded
sleeve
no. 160406
PU: 100 pc(s)
Qty.
2 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
4 pc(s)
4 pc(s)
■ Selection, transom base profile
System width
mm
No.
50
56
76
160551
160553
160555
KOMBI
transom base
Qty.
profile
PU: 10 pc(s)
KOMBI 50 V 2 pc(s)
KOMBI 56 V 2 pc(s)
KOMBI 76 V 2 pc(s)
Length
mm
300
300
300
■ Cylinder head screw selection
Cylinder head
Timber
screw
mullion width PU: 100 pc(s)
mm
No.
50 to 58
905552
59 to 68
905562
69 to 78
905572
79 to 88
905582
89 to 98
905592
Quantity screws depends on the transom depth
mm
60 to 79
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
80 to 99
3 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
100 to 119
3 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
120 to 159
3 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
160 to 199
3 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
200 to 239
4 pc(s)
4 pc(s)
4 pc(s)
4 pc(s)
4 pc(s)
240 to 300
4 pc(s)
4 pc(s)
4 pc(s)
4 pc(s)
4 pc(s)
2016
403
THERM+ H-V
Assembly options
■ KOMBI two-sided connection selection and accessories
THERM+ H-V
Connector technology
Timber façade THERM+ H-V 50/56/76 mm
TC timber connector KOMBI
One-sided connection variant 1
■ Technical information
– Technical information and options tables,
see next page.
– T78 = Transom length
– T79 = Machined recess 17.5 x 30 mm
– T80 = Special nail screw
– T82 = Mullion element
– T84 = Special end grain screw
– T85 = Longitudinal stop
– T86 = Transom element
– T87 = "KOMBI" base profile
– T226 = Screw sleeve no. 160405
– T228 = Special timber screw no. 908545
404
2016
KHV-0624
THERM+ H-V
Connector technology
Timber façade THERM+ H-V 50/56/76 mm
TC timber connector KOMBI
One-sided connection variant 1
■ Technical information
– The transom dimensions should be calculated according to the
DIN EN 13830 product standard to max. 3 mm deflection in the direction
of the glass load.
– The finished connection is suitable only for F1, F23 and F45 loads
(see chapter Dimensioning). The connector should be appropriately
protected against distortion.
– The glass load specifications refer to theoretical maximum glass loads
without taking into consideration wind loads, stanchion loads or additional
loads. In the case of load case combinations, this load is reduced
depending on the size and influence surface. The basis for determining
these glass loads is the characteristic load-bearing capacity of the
connector see ETA-13/0765 taking into account the following factors:
- Gross density wood/wood-based materials б > 350 kg/m³
- Modification coefficient for load effect duration
and moisture content kmod = 0.6
- Partial safety factor laminated timber уM = 1.30
- Partial safety factor for effect уG = 1.35
These factors can vary. The connection must be dimensioned
based on the Eurocodes as well as the ETA-13/0765.
– Connector set consists of:
- Mullion element
- Transom element
- Longitudinal stop
Screws, screw sleeves and threaded sleeves must be ordered separately.
Transom
depth
mm
Max. glass
weight
kg
60 to 79
80 to 99
100 to 119
120 to 159
160 to 199
200 to 239
240 to 300
253
274
367
387
426
455
481
TC timber connector
PU: 10 pc(s)
No.
161302
161307
161312
161317
161322
161327
161332
Set
60
80
100
120
160
200
240
Nail screw
PU: 100 pc(s)
Qty.
1 pc(s)
1 pc(s)
1 pc(s)
1 pc(s)
1 pc(s)
1 pc(s)
1 pc(s)
No.
908554
908555
908556
908557
908558
908559
908560
Qty.
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
End grain
Screw sleeve Special timber
screw
screw
no. 908550
no. 160405
no. 908545
PU: 100 pc(s) PU: 100 pc(s) PU: 100 pc(s)
Qty.
Qty.
Qty.
2 pc(s)
2 pc(s)
2 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
4 pc(s)
3 pc(s)
3 pc(s)
4 pc(s)
3 pc(s)
3 pc(s)
5 pc(s)
4 pc(s)
4 pc(s)
5 pc(s)
4 pc(s)
4 pc(s)
■ Selection, transom base profile
System width
mm
No.
50
56
76
160551
160553
160555
KOMBI
transom base
Qty.
profile
PU: 10 pc(s)
KOMBI 50 V 1 pc(s)
KOMBI 56 V 1 pc(s)
KOMBI 76 V 1 pc(s)
Length
mm
300
300
300
2016
405
THERM+ H-V
Assembly options
■ KOMBI one-sided connection variant 1, selection and accessories
THERM+ H-V
Connector technology
Timber façade THERM+ H-V 50/56/76 mm
TC timber connector KOMBI
One-sided connection variant 2
■ Technical information
– Technical information and options tables,
see next page.
– T78 = Transom length
– T79 = Machined recess 17.5 x 30 mm
– T80 = Special nail screw
– T82 = Mullion element
– T84 = Special end grain screw
– T85 = Longitudinal stop
– T86 = Transom element
– T87 = "KOMBI" base profile
– T227 = Cylinder screw
– T229 = M6 nut (customer provision)
– T230 = Counter plate (self-made)
406
2016
KHV-0625
THERM+ H-V
Connector technology
Timber façade THERM+ H-V 50/56/76 mm
TC timber connector KOMBI
One-sided connection variant 2
■ Technical information
– The transom dimensions should be calculated according to the DIN EN 13830
product standard to max. 3 mm deflection in the direction of the glass load.
– The finished connection is suitable only for F1, F23 and F45 loads (see chapter Dimensioning).
The connector should be appropriately protected against distortion.
– The glass load specifications refer to theoretical maximum glass loads without taking into
consideration wind loads, stanchion loads or additional loads. In the case of load case
combinations, this load is reduced depending on the size and influence surface. The basis
for determining these glass loads is the characteristic load-bearing capacity of the connector
see ETA-13/0765 taking into account the following factors:
- Gross density wood/wood-based materials б > 350 kg/m³
- Modification coefficient for load effect duration and moisture content kmod = 0.6
- Partial safety factor laminated timber уM = 1.30
- Partial safety factor for effect уG = 1.35
These factors can vary. The connection must be dimensioned based on the Eurocodes
as well as the ETA-13/0765.
– Connector set consists of:
- Mullion element
- Transom element
- Longitudinal stop
Screws, screw sleeves and threaded sleeves must be ordered separately.
■ KOMBI one-sided connection variant 2, selection and accessories
Max. glass
weight
kg
60 to 79
80 to 99
100 to 119
120 to 159
160 to 199
200 to 239
240 to 300
253
274
367
387
423
455
481
TC timber connector
PU: 10 pc(s)
No.
161302
161307
161312
161317
161322
161327
161332
Set
60
80
100
120
160
200
240
Nail screw
PU: 100 pc(s)
Qty.
1 pc(s)
1 pc(s)
1 pc(s)
1 pc(s)
1 pc(s)
1 pc(s)
1 pc(s)
No.
908554
908555
908556
908557
908558
908559
908560
Qty.
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
End grain
Screw sleeve
screw
no. 908550
no. 160405
PU: 100 pc(s) PU: 100 pc(s)
Qty.
Qty.
2 pc(s)
2 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
4 pc(s)
3 pc(s)
4 pc(s)
3 pc(s)
5 pc(s)
4 pc(s)
5 pc(s)
4 pc(s)
Length of
counter plate
mm
45
63
83
103
143
183
223
THERM+ H-V
Assembly options
Transom
depth
mm
■ Selection, transom base profile
System width
mm
No.
50
56
76
160551
160553
160555
KOMBI
transom base
Qty.
profile
PU: 10 pc(s)
KOMBI 50 V 1 pc(s)
KOMBI 56 V 1 pc(s)
KOMBI 76 V 1 pc(s)
Length
mm
300
300
300
■ Cylinder head screw selection
Cylinder head
Timber
screw
mullion width PU: 100 pc(s)
mm
No.
50 to 58
905572
59 to 68
905582
69 to 78
905592
79 to 88
905602
89 to 98
905612
Quantity screws depends on the transom depth
mm
60 to 79
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
80 to 99
3 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
100 to 119
3 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
120 to 159
3 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
160 to 199
3 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
3 pc(s)
200 to 239
4 pc(s)
4 pc(s)
4 pc(s)
4 pc(s)
4 pc(s)
240 to 300
4 pc(s)
4 pc(s)
4 pc(s)
4 pc(s)
4 pc(s)
2016
407
THERM+ H-V
Connector technology
Timber façade THERM+ H-V 50/56 mm
TC timber connector with expansion mullion
Expansion mullion connection
■ Technical information
– Technical information and options tables,
see next page.
– T77 = Base profile length
– T78 = Transom length
– T79 = Machined recess 17.5 x 30 mm
– T80 = Special nail screw
– T82 = Mullion element
– T84 = Special end grain screw
– T85 = Longitudinal stop
– T86 = Transom element
– T231 = Threaded sleeve no. 160407
– T232 = Sealing tape no. 951990
– T233 = Screw no. 907550
– T234 = Screw no. 908225
408
2016
KHV-0629
THERM+ H-V
Connector technology
Timber façade THERM+ H-V 50/56 mm
TC timber connector with expansion mullion
Expansion mullion connection
■ Technical information
– The transom dimensions should be calculated according to the
DIN EN 13830 product standard– max. 3 mm deflection in the direction
of the glass load.
– The finished connection is suitable only for F1, F23 and F45 loads
(see chapter Dimensioning). The connector should be appropriately
protected against distortion.
– The glass load specifications refer to theoretical maximum glass loads
without taking into consideration wind loads, stanchion loads or additional
loads. In the case of load case combinations, this load is reduced
depending on the size and influence surface. The basis for determining
these glass loads is the characteristic load-bearing capacity of the
connector see ETA-13/0765 taking into account the following factors:
- Gross density wood/wood-based materials б > 350 kg/m³
- Modification coefficient for load effect duration and moisture
content kmod = 0.6
- Partial safety factor laminated timber уM = 1.30
- Partial safety factor for effect уG = 1.35
These factors can vary. The connection must be dimensioned
based on the Eurocodes as well as the ETA-13/0765.
– Connector set consists of:
- Mullion element
- Transom element
- Longitudinal stop
Screws, screw sleeves and threaded sleeves must be ordered separately.
Transom
depth
mm
Max. glass
weight
kg
60 to 79
80 to 99
100 to 119
120 to 159
160 to 199
200 to 239
240 to 300
*
*
*
*
*
*
*
TC timber connector
PU: 10 pc(s)
No.
161302
161307
161312
161317
161322
161327
161332
Set
60
80
100
120
160
200
240
Qty.
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
2 pc(s)
Nail screw
PU: 100 pc(s)
No.
908554
908555
908556
908557
908558
908559
908560
Qty.
4 pc(s)
4 pc(s)
4 pc(s)
4 pc(s)
4 pc(s)
4 pc(s)
4 pc(s)
End grain
Screw sleeve
screw
no. 908550
no. 160407
PU: 100 pc(s) PU: 100 pc(s)
Qty.
Qty.
4 pc(s)
4 pc(s)
6 pc(s)
6 pc(s)
6 pc(s)
6 pc(s)
8 pc(s)
6 pc(s)
8 pc(s)
6 pc(s)
10 pc(s)
8 pc(s)
10 pc(s)
8 pc(s)
Flat head
screw
no. 908225
PU: 100 pc(s)
Qty.
4 pc(s)
6 pc(s)
6 pc(s)
6 pc(s)
6 pc(s)
8 pc(s)
8 pc(s)
* Note: Design values for the extending mullion connection are available on request.
2016
409
THERM+ H-V
Assembly options
■ Extending mullion connection, selection and accessories
THERM+ H-V
Connector technology
Timber curtain wall 50/56/76 mm
TC timber connector
Static dimensioning
■ Scope
The use of the TC timber connector is regulated in ETA-13/0765 which sets out the basis for the static dimensioning and processing
of the connector. The key elements of ETA-13/0765 are listed below.
■ Types of timber
The following types of timber and timber-based materials are covered by the ETA:
– Solid softwood according to EN 14081
– Solid hardwood according to EN 14081
– Glued laminated timber made of softwood according to EN 14081
– Glued laminated timber made of hardwood according to EN 14081
oak, beech or meranti
(alternatives with building authority approval)
– Laminated veneer lumber (LVL) as EN 14374
– Intrallam and Porallam with building authority approval
– Plywood according to EN 636
The calculation is based on a gross density of 350 kg/m³. Materials with a higher gross density of up to 500 kg/m³ can be used.
Gross densities over 500 kg/m³ are calculated with a value of 500 kg/m³.
Minimum softwood requirements are grades S 10 / C 24.
The conversion factors can be found in the ETA and/or the following example for static dimensioning.
410
2016
THERM+ H-V
Connector technology
Timber curtain wall 50/56/76 mm
TC timber connector
Static dimensioning
■ Service classes
The RAICO TC timber connector can only be used in buildings in the service classes 1 + 2 according to Eurocode 5.
These categories are differentiated as follows:
Table NA.6 – equilibrium moisture content of timber structural materials
Extract from DIN-EN 1995-1-1/NA:2010-12
Service class
Equilibrium
moisture content
1
2
3
(5 to 15) %a
(10 to 20) %b
(12 to 24) %
c
a
In most softwoods in service class 1 the average equilibrium moisture content does not exceed 12 %.
b
In most softwoods in service class 2 the average equilibrium moisture content does not exceed 20 %.
c
Service class 3 also includes structures in which higher equilibrium moisture contents are permitted.
Service class
1
2
3
Moisture content in
timber construction materials, corresponds to
an ambient climate of
T = 20° C
φ = 65 % 2)
T = 20° C
φ = 85 % 2)
Climatic conditions which
lead to greater timber
moistures than service
class 2
Timber moisture w in
timber construction
materials after a period
of acclimatisation
Examples of ambient
climate
Up to around 12 % 3)
all-round enclosed and
heated structures
Up to around 20 % 3)
roofed, open structures
around > 20 %
Outdoor structures
exposed to the weather
1)
Equilibrium moisture content of timber construction materials, see Tables 1 – 18.
2)
Relative humidities which are exceeded for only a few weeks per year.
3)
In most softwoods in this service class, the specified timber moistures as average equilibrium moistures
are not exceeded.
THERM+ H-V
Assembly options
Table 1-15 Service classes (NKL) according to DIN 1052: 2008-12, 7.1.1.1)
Extract from DIN 1052
2016
411
THERM+ H-V
Connector technology
Timber curtain wall 50/56/76 mm
TC timber connector
Static dimensioning
■ Dimensioning concept according to EUROCODE
Mullion and transom façades are dimensioned according to
– EUROCODE 0 – Basis of structural design
– EUROCODE 1 – Effect on structures
– EUROCODE 5 – Design, calculation and dimensioning of timber buildings
– EN 13830 – Product standard for curtain wall façades
(This standard regulates the deflection limits for mullion and transom components of façades)
Dimensioning is carried out according to the semi-probabilistic safety concept which substitutes admissible values with characteristic
values and specifies different partial safety factors as fixed values. The mullion and transom components are dimensioned in accordance
with the EUROCODES in this concept.
The TC timber connectors from RAICO Bautechnik, have
– reduced edge distances
– end-grain screw fasteners
– custom components
and so fall into the standard category of "non-regulated components". Regulation is according to ETA-13/0765 dated 25.06.2013.
This ETA rules the usability and load-bearing capacity of the T-connector in the following loading directions:
■ Description of the loads / direction of the load
F45 = inherent weight load caused by a filling element such as glass or metal panel. With average force transmission the tested clamping
thickness is max. 65 mm. In the case of asymmetric force transmission this clamping thickness should be reduced.
Please get in contact with us to discuss
F1 = centric tensile load on the transom. This can result from
– wind load in the region of corner glazing
– replacement of mullions and continuous transoms.
In this case the corresponding proportion of the glass load of the adjacent fields is considered.
F2, F3 = right-angled load on mullion- and transom axis. Loads in this direction can be e.g.
– Wind suction loads
– Wind pressure loads
– Balustrade loads
ETA-13/0765 breaks down the directions of loads as follows:
F2 = load in the wind pressure direction
F3 = load in the wind suction direction
412
2016
THERM+ H-V
Connector technology
Timber curtain wall 50/56/76 mm
TC timber connector
Static dimensioning
Please note:
The basis for structural dimensioning is always the
European Technical Approval.
– ETA-13/0765
– EUROCODES 0, 1, 5 as well as national appendices
– Product standard EN 13830 for curtain wall façades
– Requirements from the structure
– the national appendices the Eurocodes and/or
national regulations must be observed.
The T-connections of façades may only be exposed to loads and deformations listed in the ETA and in the above documents.
Avoid distortions in the façades or prevent with suitable measures.
THERM+ H-V
Assembly options
Construction specifications e.g. final distances in the region of the connection points are not regulated in this permission.
The specifications of EUROCODE 5 – Dimensioning and construction of timber buildings (DIN EN 1995) apply.
2016
413
THERM+ H-V
Connector technology
Timber curtain wall 50/56/76 mm
TC timber connector
Static dimensioning
■ Dimensioning connections of the T-connector
When dimensioning according to the semi-probabilistic safety concept, there is a differentiation between effects/loads and the
stress-bearing capacity.
Effects are loads such as
– Snow loads
– Wind loads
– Stanchion loads
on the T-connections.
The level and type of these loads are regulated in EUROCODE 1 – Effects (EN 1991).
The partial safety factors γF of the loads must be considered. These are,
– for independent constant loads e.g. inherent weight loads (glass loads), γG = 1.35
– independent variable loads e.g. wind load and stanchion load, γQ = 1.50
See the following extract from the standard. The most unfavourable values shall be used in all cases.
Table NA.A.1.2(B) – partial safety coefficients for effects: (STR/GEO) (Group B)
Extract from DIN EN 19990:2010-12
Effect
Symbol
Situations
P/T
A/E
γG, sup
1.35
1.00
γG, inf
1.00
1.00
Independent variable loads:
Unfavourable case b, c
γQ
1.50
1.00
Extraordinary loads:
γA
–
1.00
Independent constant loads:
Unfavourable case a, b
Favourable case
a, b
a
The limit state for the failure of the load-bearing structure is verified by multiplying all the characteristic values of an independent
constant load (i.e. the characteristic values of all constant loads from the same origin) by the factor γG, sup if the total resulting effect
on the observed stress is unfavourable, or by the factor γG, inf if the total resulting effect is favourable.
b
To choose the partial safety coefficients for the verification of geotechnical limit values, see DIN 1054-101:2009-02, Tables A 2-1,
A 2-2 and A 2-3
c
In the case of a favourable effect γQ = 0
d
The values γG and γQ may only be divided in individual cases and only with the consent of the responsible building authorities into
factors γg and γq for the uncertainties of the representative values of the loads and into a factor γEd for the model uncertainty of the
loads and stresses.
414
2016
THERM+ H-V
Connector technology
Timber curtain wall 50/56/76 mm
TC timber connector
Static dimensioning
The probability that all simultaneously occurring effects are at their maximum in one stress direction is extremely slim.
In this case, so-called combination rules are applied, in which a variable load is taken into account with its maximum value and all other
variable loads are reduced by so-called combination factors.
The relevant load case combination is the one with the higher value which is used in mullion and transom façades, e.g. in the case of
wind load (wind pressure, wind suction) and stanchion load.
The combination factors can be taken from EUROCODE 0. An extract is given below:
Table NA.A.1.1 – Numerical values for combination coefficients in civil engineering
Extract from DIN EN 1990:NA2010-12 – Germany
Effect
Ψ0
Ψ1
Ψ2
– Category A: Living rooms and staff rooms
0.7
0.5
0.3
– Category B: Offices
0.7
0.5
0.3
– Category C: Conference rooms
0.7
0.7
0.6
– Category D: Sales rooms
0.7
0.7
0.6
1
0.9
0.8
– Category F: Thoroughfares, vehicle load ≤ 30 kN
0.7
0.7
0.6
– Category G: Thoroughfares, 30 kN ≤ vehicle load ≤ 160 kN
0.7
0.5
0.3
0
0
0
Payloads in civil engineering (categories see EN 1991-1-1) a
– Category E: Storage rooms
– Category H: Roofs
Snow and ice loads, see DIN EN 1991-1-3
– Locations up to sea level + 1000 m
0.5
0.2
0
Locations above sea level + 1000 m
0.7
0.5
0.2
Wind loads, see DIN EN 1991-1-4
0.6
0.2
0
Temperature effects (not fire), see DIN EN 1991-1-5
0.5
0.5
0
Construction site settlement, see DIN EN 1997
Other effects: b, c
1
1
1
0.8
0.7
0.5
Reduction coefficients for payloads in multi-storey buildings see DIN EN 1991-1-1.
b
Fluid pressure is generally treated as a variable load for which the Ψ-coefficients are defined site-specifically. Fluid pressure whose
value is limited by geometrical constraints may be treated as a constant load wherein all Ψ-coefficients should be set to 1.0.
c
Ψ coefficients for machine loads should be defined with respect to the operation.
THERM+ H-V
Assembly options
a
2016
415
THERM+ H-V
Connector technology
Timber curtain wall 50/56/76 mm
TC timber connector
Static dimensioning
■ The stress-bearing capacity/resistance of the T-connection
The stress-bearing capacity/resistance of the T-connection is regulated in ETA-13/0765.
The characteristic strength of the connection at a gross density (gross density of mullions and transoms must be lower) of ρL = 350 kg/m³
can be taken from the following table.
Table C.1 – Effective quantity nj, nef, 1, nef, 45 and characteristic values F1, RK, F2, RK, F3, RK, F45, RK
for a characteristic gross density of 350 kg/m³
RAICO T-connector
nef, 1
F1, RK [kN]
nJ
F2, RK [kN]
Wind
pressure
F3, RK [kN]
Wind
suction
nef, 45
F45, RK [kN]
F45, in, RK [kN]
SOLO 60
1.60
3.1
2
3.4
3.4
0.42
1.7
1.0
SOLO 80
2.41
4.7
3
5.1
5.1
0.60
2.0
1.0
SOLO 100
2.97
5.8
3
5.1
5.1
0.82
2.4
1.0
SOLO 120
2.63
5.2
4
6.8
5.8
0.99
2.7
1.0
SOLO 160
2.36
4.6
4
6.8
5.8
1.30
3.2
1.0
SOLO 200
3.85
7.5
5
7.0
5.8
1.57
3.7
1.0
SOLO 240
3.30
6.5
5
7.0
5.8
1.80
4.0
1.0
KOMBI 60
1.60
3.1
2
3.4
3.4
0.42
3.7
3.0
KOMBI 80
2.41
4.7
3
5.1
5.1
0.60
4.0
3.0
KOMBI 100
2.97
5.8
3
5.1
5.1
0.82
5.4
4.0
KOMBI 120
2.63
5.2
4
6.8
5.8
0.99
5.7
4.0
KOMBI 160
2.36
4.6
4
6.8
5.8
1.30
6.2
4.0
KOMBI 200
3.85
7.5
5
7.0
5.8
1.57
6.7
4.0
KOMBI 240
3.30
6.5
5
7.0
5.8
1.80
7.0
4.0
At higher gross densities the characteristic strengths are calculated according to the following equations.
The forces F1, F2 and F3 always act in the centre of the connector. The force F45 has an eccentricity which corresponds to a maximum
infill thickness of 65 mm (based on a symmetrical glass construction; the infill thickness should be reduced for asymmetrical glass
constructions). The maximum gross density may not exceed 500 kg/m³. The minimum gross density may not be less than 350 kg/m³.
F45, RK – characteristic value for inherent weight stress
F45, RK = 1693 x nef45 x (ρK/350)0.5 + F45,in,RK [N]
F1, RK – characteristics value for tensile stress on the transom
F1, RK = nef1 x 1958 x (ρK/350)0.8 [N]
F2, RK – characteristic value in the wind pressure direction
F2, RK = min.
s
nj x 1693 x (ρK/350)0.5 [N]
7000 N
F3, RK – the characteristic value in the wind suction direction
F3, RK = min.
nef, 1
s
nj x 1693 x (ρK/350)0.5 [N]
5800 N
= effective no. of screws for stress direction F1
nef, 45
= effective no. of screws for stress direction F45
nj
= no. of screws in the transom
PK
= gross density in the mullion/transom in kg/m³. The lower value should be used for the dimensioning.
F45,in,RK = additional load-bearing capacity in the loading direction
These characteristic values apply only for connectors in pairs for load directions F1, F2, F3 and F45
The specified values apply per connection.
416
2016
THERM+ H-V
Connector technology
Timber curtain wall 50/56/76 mm
TC timber connector
Static dimensioning
The following should be considered when determining the stress-bearing capacity/resistance of the connection:
– Partial safety value for individual materials in timber constructions γM = 1.30 (Germany – national requirements must be taken into account)
Table NA.2 – Partial safety coefficients γM for strength- and stiffness properties in constant and temporary dimensioning situations
Extract from DIN EN 1995-1-1/NA:2010-12 – Germany
Building material
γM
Solid wood, chipboards, hard fibreboards, medium hard fibreboards, MDF fibreboards, soft fibreboards, laminated veneer
lumber, plywood, OSB, laminated timber
1.3
Steel in connections
– for bending-stressed dowel-type fasteners
1.3
– for tension or shear-stressed parts in verification of resistance to yield stress in the net cross section
1.3
– Board proof of load-bearing capacity for nail boards
1.25
Modification coefficient kmod according to EUROCODE 5
Load effect duration
class
Order of magnitude of the accumulated
duration of the characteristic load effect
medium
1 week to 6 months
short
shorter than a week
very short
shorter than a minute
THERM+ H-V
Assembly options
Note: Examples for assignment to duration of load effect classes can be found in Table 2.2. Climate-related load effects (snow, wind) vary
in magnitude in different countries so the national appendix is used for assignment to load effect duration classes.
2016
417
THERM+ H-V
Connector technology
Timber curtain wall 50/56/76 mm
TC timber connector
Static dimensioning
Table NA.1 – Breakdown of loads according to DIN 1055-1, DIN 1055-3, DIN 1055-4, DIN 1055-5, DIN 1055-9, DIN 1055-10 and DIN
1055-100 in load effect duration classes (KLED)
Extract from DIN EN 1995-1-1-2010-12 – Germany
Effect
KLED
Specific weights and surface loads according to DIN
1055-1
constant
Perpendicular payloads DIN 1055-3
A Top ground, living- and staff rooms
medium
B Office surfaces, working surfaces, corridors
medium
C Rooms, conference rooms and surfaces which may be used
for gatherings (with exception of categories defined under A, short
B, D and E)
D Sales rooms
medium
E Factories and workshops, sheds, storage surfaces and
accesses, surfaces with considerable footfall
long
F Roads and parking surfaces for lightweight vehicles (total
load ≤ kN), access ramps to these surfaces
medium
short
G Surfaces for operation with counterweight stackers
medium
H Non weight-bearing roofs, except for typical maintenance
or repair
short
K Helicopter normal loads
short
T Staircases and stair landings
short
Z Accesses, balconies and similar
short
Horizontal payloads according to DIN 1055-3
Horizontal payloads from persons on balustrades, landings
and the constructions used as barriers
Horizontal payloads for achieving adequate longitudinal and
transverse rigidity
Horizontal loads for helicopter landing pads on flat roofs
– for horizontal payloads
– for rollover protection
Wind loads according to DIN 1055-4
short
a
short
very short
short/very
short b
Snow load and ice load according to DIN 1055-5
Height of construction site above sea level < 1000 m
short
Height of construction site above sea level > 1000 m
medium
Impact loads according to DIN 1055-9
very short
Horizontal loads from crane and machine operation
according to DIN 1055-10
short
a
Corresponding to the associated loads.
wind, kmod the average of short and very short can be used.
b For
418
2016
THERM+ H-V
Connector technology
Timber curtain wall 50/56/76 mm
TC timber connector
Static dimensioning
Table NA.4 – Calculated values for modification coefficients kmod for timber, timber- and plaster materials
Extract from DIN EN 1995-1-1/NA:2010-12 – Germany
Load effect duration class
Building material
Standard
Laminated beams,
cross-laminated timber,
solid timber boards
Gypsum boards (types
GKB, GKF, GKBI and
GKFI), gypsum fibre
boards
Cement bonded
chipboards
DIN 18180,
DIN EN
15283-2
Service class
constant
effect
long effect
medium
effect
short effect
very short
effect
1
0.60
0.70
0.80
0.90
1.10
2
0.60
0.70
0.80
0.90
1.10
1
0.20
0.40
0.60
0.80
1.10
2
0.15
0.30
0.45
0.60
0.80
1
0.30
0.45
0.65
0.85
1.10
2
0.20
0.30
0.45
0.60
0.80
Please note that the table is taken from the national appendix (D) of the Eurocode. If used in other countries the correspondingly
applicable values must be used.
Example:
Glass loads = inherent weight load = constant effect, kmod = 0.6
Wind loads = average value of short and very short effect kmod = 1.0
Impact loads = very short effect, kmod = 1.10
To dimension the connector, the effects are compared with the load-bearing capacity of the connector.
In this case the following applies:
FED / FRD ≤ 1 wherein
FED = design value of force resulting from the stress
FRD = design value of the load-bearing capacity of the fastener resulting from the admissible values, taking into account coefficients.
In the event of load case combinations these are superimposed according to the calculation formula (B1.5), see ETA-13/0765 as follows:
THERM+ H-V
Assembly options
(F1,ED / F1,RD)² + (F23,ED / F23,RD)² + (F45,ED / F45,RD)² ≤ 1
2016
419
THERM+ H-V
Connector technology
Timber curtain wall 50/56/76 mm
TC timber connector
Static dimensioning
■ Example of calculation on the basis of the façade element shown
Field width = 2.3 m
Field height upper = 2.6 m
Field height lower = 0.9 m
Total glass thickness = 16 mm
Stanchion load = 1.0 kN/m (cat B)
Wind load suction + pressure = 0.5 KN/m²
The inherent weight of the transom is not taken into account in this calculation.
Gross density of laminated timber = 350 kg/m³
Use: Hotel
AW type 1: Triangular load
Field height > field width
Effects
Inherent weight load = glass load on the transom
Field
height
Feldhöhe
oben
above
Field
width
Feldbreite
AW type 2: Trapezoidal load
Field height < field width
F45,ED = 2.12 KN x 1.35 = 2.86 KN
Load surfaces for wind load/stanchion load:
The wind suction load case is relevant in this case because it acts
in the same direction as the stanchion load.
In the case of type 1: Aw =
Field width x field width
4
In the case of type 2: Aw =
Field width x field height lower Field height lower x field height lower
–
2
4
=
=
2.3 m x 2.3 m
= 1.32 m2
4
2.3 m x 0.9 m
0.9 m x 0.9 m
–
= 0.83 m2
2
4
Total stress surface = 1.32 m² + 0.83 m² = 2.15 m²
Calculating of wind load on the transom:
Total wind load = 2.15 m² x 0.5 kN/m² = 1.08 KN
Partial safety factor of the effect γQ = 1.50
FW,ED = 1.08 x 1.50 = 1.62 KN
Stanchion load FH = transom length x stanchion load
= 2.3 m x 1.0 KN/m = 2.3 KN
FH,ED = 2.30 x 1.50 = 3.45 KN
Superimposition of the wind load and stanchion load:
ψO = 0.6 for wind loads / 0.8 for other loads (Germany)
LFK1: F3,ED = FW,ED + FH,ED x 0.8
= 1.62 + 3.45 x 0.8 = 4.38 KN
LFK2: F3,ED = FH,ED + FW,ED x 0.6
= 3.45 + 1.62 x 0.6 = 4.42 KN
Load case combination 2 is relevant.
420
2016
unten
below
Partial safety factor of the effect
ϒG = 1.35 for independent constant loads
Field
height
Feldhöhe
Glass weight = 2.3 x 2.6 x 16 x 2.5 ≈ 212 kg = 2.12 KN
THERM+ H-V
Connector technology
Timber curtain wall 50/56/76 mm
TC timber connector
Static dimensioning
Resistance of the connector:
SOLO 143 connector is used.
On the basis of the gross density, the values from Table C1 – ETA-13/0765 can be used.
These are:
F1,RK = 4.6 KN
F3,RK (wind suction) = 5.8 KN
F45,RK = 3.2 KN
Please note that these values apply per connection and in the following calculation for a transom they are
multiplied by a factor of 2.
Resistance of the T-connectors in direction F45 – glass load
Kmod for BSH service class 2 = 0.6
Safety factor γM for BSH = 1.30
F45,RD+ = F45,RK x (2 x 0.6 / 1.30) = 2.95 KN
Resistance of the T-connection in direction F3 – wind suction
Kmod for BSH service class 1 + 2 = 1.0 for wind loads
= 1.10 for stanchion loads
Because of the different Kmod the lower value of 1.0 is used for the calculation.
Safety factor γM for BSH = 1.30
F3,RD =
F3,RK x 2 x 1.0
= 8.92 KN
1.3
The load F1 is not taken into account.
F45,ED
F45,RD
=
2,86
2.86
2,95
2.95
= 0,97
4,42
4.42
8,92
8.92
= 0,5
THERM+ H-V
Assembly options
Proof for F45
Proof for F3
F3,ED
F3,RD
=
Proof for combined load:
(F1,ED / F1,RD)² + (F3,ED / F3,RD)² + (F45,ED / F45,RD)² < 1
(0 / 0)² + 0.5² + 0.97² = 0 + 0.24 + 0.94 = 1.19
2016
421
THERM+ H-V
Connector technology
Timber curtain wall 50/56/76 mm
TC timber connector
Static dimensioning
■ Result
The connector cannot sustain the loads imposed.
A lower connector or a KOMBI type connector must be used.
In the case of the KOMBI 143, while maintaining the values, the following load-bearing capacities are
obtained on the basis of the following values:
F1,RK = 4.6 KN
F3,RK (wind suction) = 5.8 KN
F45,RK = 6.2 KN
F45,RD =
6.2 x 2 x 0.6
1.3
F3,RD =
5.8 x 2 x 1.0
= 8.92 KN
1.3
= 5.72 KN
Verification for combined loads with the KOMBI type connector:
(F1,ED / F1,RD)² + (F3,ED / F3,RD)² + (F45,ED / F45,RD)² =
(0 / 0)² + (4.42 / 8.92)² + (2.86 / 5.72)² =
0 + 0.5² + 0.52 = 0.5
This verification is satisfied; the load-bearing capacity of the connector is adequate.
The following table provides orientation for the design width of the SOLO and KOMBI T-connectors taking
into account the following factors:
Gross density timber = 350 kg/m³
Kmod = 0.6 for load type F45
Kmod = 1.0 for load type F2.3
Kmod = 0.6 for load type F1
Partial safety factor of material γM= 1.30
Partial safety factor of constant load γG = 1.35
Partial safety factor of variable load γQ = 1.50
Design value for maximum glass load in direction F45 per transom
(load case combinations shall be superimposed)
SOLO
116 kg
138 kg
162 kg
182 kg
218 kg
250 kg
276 kg
TC60
TC80
TC100
TC120
TC160
TC200
TC240
KOMBI
253 kg
274 kg
367 kg
388 kg
423 kg
455 kg
481 kg
Design value for maximum wind pressure-/suction load in direction F2,3 per transom
(load case combinations shall be superimposed)
TC SOLO/KOMBI 60
TC SOLO/KOMBI 80
TC SOLO/KOMBI 100
TC SOLO/KOMBI 120
TC SOLO/KOMBI 160
TC SOLO/KOMBI 200
TC SOLO/KOMBI 240
422
2016
F2 – wind pressure
F3 – wind suction
3.47 KN
5.21 KN
5.21 KN
6.95 KN
6.95 KN
7.18 KN
7.18 KN
3.47 KN
5.21 KN
5.21 KN
5.95 KN
5.95 KN
5.95 KN
5.95 KN
THERM+ H-V
Glazing/Sealing technology
Timber curtain wall 50/56/76 mm
Glass load transmission up to 200 kg
■ Technical information
Selection of the glass carriers
– For glass loads up to 200 kg the load transmission needs one glass carrier per side.
- Synthetic glass carrier:
Infill thicknesses from 10 up to 64 mm:
Fixation with 3 countersunk screws
no. 012122 each.
Infill
Synthetic
Infill
Aluminium
thickness glass carrier thickness glass carrier
PU
mm
No.
mm
No.
10 to 11
162002
10 to 12
167302
10 pc(s)
12 to 13
162007
13 to 14
167307
10 pc(s)
14 to 15
162012
15 to 16
167312
10 pc(s)
16 to 17
162017
17 to 18
167317
10 pc(s)
18 to 19
162022
19 to 20
167322
10 pc(s)
20 to 21
162027
21 to 22
167327
10 pc(s)
22 to 23
162032
23 to 24
167332
10 pc(s)
24 to 25
162037
25 to 26
167337
10 pc(s)
26 to 27
162042
27 to 28
167342
10 pc(s)
28 to 29
162047
29 to 30
167347
10 pc(s)
30 to 31
162052
31 to 32
167352
10 pc(s)
32 to 33
162057
33 to 34
167357
10 pc(s)
34 to 35
162062
35 to 36
167362
10 pc(s)
36 to 37
162067
37 to 38
167367
10 pc(s)
38 to 39
162072
39 to 40
167372
10 pc(s)
40 to 41
162077
41 to 42
167377
10 pc(s)
42 to 43
162082
43 to 44
167382
10 pc(s)
167387
10 pc(s)
44 to 45
162087
45 to 46
46 to 47
162092
47 to 48
167392
10 pc(s)
48 to 49
162097
49 to 50
167397
10 pc(s)
50 to 51
162102
51 to 52
167402
10 pc(s)
52 to 53
162107
53 to 54
167907
10 pc(s)
54 to 55
162112
55 to 56
167912
10 pc(s)
56 to 57
162117
57 to 58
167917
10 pc(s)
58 to 59
162122
59 to 60
167922
10 pc(s)
60 to 61
162127
61 to 62
167927
10 pc(s)
62 to 63
162132
63 to 64
167932
10 pc(s)
64 to 65
162137
- Aluminium glass carrier:
Infill thickness up to 14 mm fixed by
3 countersunk screws no. 902805 each.
Infill thickness from 15 mm fixed by
3 flat fillister head screws no. 012099 each.
– Two special timber screws no. 908020
additionally on top of the glass carrier.
THERM+ H-V
Assembly options
– Max. load per glass carrier: 100 kg.
KHV-0560
2016
423
THERM+ H-V
Glazing/Sealing technology
Timber curtain wall 50/56/76 mm
Glass load transmission up to 300 kg
■ Technical information
Selection of the glass carriers
– For glass loads up to 300 kg the load transmission needs one glass carrier per side.
- Synthetic glass carrier:
Infill thicknesses from 10 up to 64 mm:
Fixation with 3 countersunk screws
no. 012122 each.
Infill
Synthetic
Infill
Aluminium
thickness glass carrier thickness glass carrier
PU
mm
No.
mm
No.
10 to 11
162002
10 to 12
167302
10 pc(s)
12 to 13
162007
13 to 14
167307
10 pc(s)
14 to 15
162012
15 to 16
167312
10 pc(s)
16 to 17
162017
17 to 18
167317
10 pc(s)
18 to 19
162022
19 to 20
167322
10 pc(s)
20 to 21
162027
21 to 22
167327
10 pc(s)
22 to 23
162032
23 to 24
167332
10 pc(s)
24 to 25
162037
25 to 26
167337
10 pc(s)
26 to 27
162042
27 to 28
167342
10 pc(s)
28 to 29
162047
29 to 30
167347
10 pc(s)
30 to 31
162052
31 to 32
167352
10 pc(s)
32 to 33
162057
33 to 34
167357
10 pc(s)
34 to 35
162062
35 to 36
167362
10 pc(s)
36 to 37
162067
37 to 38
167367
10 pc(s)
38 to 39
162072
39 to 40
167372
10 pc(s)
40 to 41
162077
41 to 42
167377
10 pc(s)
42 to 43
162082
43 to 44
167382
10 pc(s)
167387
10 pc(s)
44 to 45
162087
45 to 46
46 to 47
162092
47 to 48
167392
10 pc(s)
48 to 49
162097
49 to 50
167397
10 pc(s)
50 to 51
162102
51 to 52
167402
10 pc(s)
52 to 53
162107
53 to 54
167907
10 pc(s)
54 to 55
162112
55 to 56
167912
10 pc(s)
56 to 57
162117
57 to 58
167917
10 pc(s)
58 to 59
162122
59 to 60
167922
10 pc(s)
60 to 61
162127
61 to 62
167927
10 pc(s)
62 to 63
162132
63 to 64
167932
10 pc(s)
64 to 65
162137
- Aluminium glass carrier:
Infill thickness up to 14 mm fixed by
3 countersunk screws no. 902805 each.
Infill thickness from 15 mm fixed by
3 flat fillister head screws no. 012099 each.
– Three special timber screws no. 908020
additionally on top of the glass carrier.
– Max. load per glass carrier: 150 kg.
424
2016
KHV-0562
THERM+ H-V
Glazing/Sealing technology
Timber curtain wall 50/56/76 mm
Glass load transmission up to 450 kg
■ Technical information
Selection of the glass carriers
– For glass loads up to 450 kg the load transmission needs two glass carrier per side.
- Synthetic glass carrier:
Infill thicknesses from 10 up to 64 mm:
Fixation with 3 countersunk screws
no. 012122 each.
Infill
Synthetic
Infill
Aluminium
thickness glass carrier thickness glass carrier
PU
mm
No.
mm
No.
10 to 11
162002
10 to 12
167302
10 pc(s)
12 to 13
162007
13 to 14
167307
10 pc(s)
14 to 15
162012
15 to 16
167312
10 pc(s)
16 to 17
162017
17 to 18
167317
10 pc(s)
18 to 19
162022
19 to 20
167322
10 pc(s)
20 to 21
162027
21 to 22
167327
10 pc(s)
22 to 23
162032
23 to 24
167332
10 pc(s)
24 to 25
162037
25 to 26
167337
10 pc(s)
26 to 27
162042
27 to 28
167342
10 pc(s)
28 to 29
162047
29 to 30
167347
10 pc(s)
30 to 31
162052
31 to 32
167352
10 pc(s)
32 to 33
162057
33 to 34
167357
10 pc(s)
34 to 35
162062
35 to 36
167362
10 pc(s)
36 to 37
162067
37 to 38
167367
10 pc(s)
38 to 39
162072
39 to 40
167372
10 pc(s)
40 to 41
162077
41 to 42
167377
10 pc(s)
42 to 43
162082
43 to 44
167382
10 pc(s)
167387
10 pc(s)
44 to 45
162087
45 to 46
46 to 47
162092
47 to 48
167392
10 pc(s)
48 to 49
162097
49 to 50
167397
10 pc(s)
50 to 51
162102
51 to 52
167402
10 pc(s)
52 to 53
162107
53 to 54
167907
10 pc(s)
54 to 55
162112
55 to 56
167912
10 pc(s)
56 to 57
162117
57 to 58
167917
10 pc(s)
58 to 59
162122
59 to 60
167922
10 pc(s)
60 to 61
162127
61 to 62
167927
10 pc(s)
62 to 63
162132
63 to 64
167932
10 pc(s)
64 to 65
162137
- Aluminium glass carrier:
Infill thickness up to 14 mm fixed by
3 countersunk screws no. 902805 each.
Infill thickness from 15 mm fixed by
3 flat fillister head screws no. 012099 each.
– Eight special timber screws no. 908020
additionally on top of the glass carrier.
THERM+ H-V
Assembly options
– Max. load per glass carrier: 225 kg.
KHV-0561
2016
425
THERM+ H-V
Glazing/Sealing technology
Timber curtain wall 50/56/76 mm
Assembly cross point glass carrier
■ Technical information
– Admissable glass loads:
Infill thicknesses 35 mm to 52 mm: 450 kg to 600 kg
Infill thicknesses 53 mm to 64 mm: 450 kg to 500 kg.
T145
– Max. load per support point = max. glass load : 2.
– Do not use the cross point glass carrier with
specific flat pressure profiles.
– Please contact your glass vendor for clarifying the reduced
distance of the setting block to axis of the mullion (50 mm).
– The load transmission across the cross point glass carrier
must be taken by the structural construction.
– The base profile must be screwed down additionally
(see Processing).
– T144 = Glass shim.
– T145 = Cross point glass carriers set
(selection see table).
– T149 = External view.
426
2016
KHV-0010
THERM+ H-V
Glazing/Sealing technology
Timber curtain wall 50/56/76 mm
Assembly and installation cross point glass carriers
■ Technical information
Selection of the cross point glass carriers
– T82 = Mullion element.
Infill
thickness
mm
35 to 36
37 to 38
39 to 40
41 to 42
43 to 44
45 to 46
47 to 48
49 to 50
51 to 52
53 to 54
55 to 56
57 to 58
59 to 60
61 to 62
63 to 64
– T86 = Transom element.
to
No.
Article
PU
163930
163932
163934
163936
163938
163940
163942
163944
163946
163948
163950
163952
163954
163956
163958
Cross point glass carrier set 35 to 36
Cross point glass carrier set 37 to 38
Cross point glass carrier set 39 to 40
Cross point glass carrier set 41 to 42
Cross point glass carrier set 43 to 44
Cross point glass carrier set 45 to 46
Cross point glass carrier set 47 to 48
Cross point glass carrier set 49 to 50
Cross point glass carrier set 51 to 52
Cross point glass carrier set 53 to 54
Cross point glass carrier set 55 to 56
Cross point glass carrier set 57 to 58
Cross point glass carrier set 59 to 60
Cross point glass carrier set 61 to 62
Cross point glass carrier set 63 to 64
1 pc(s)
1 pc(s)
1 pc(s)
1 pc(s)
1 pc(s)
1 pc(s)
1 pc(s)
1 pc(s)
1 pc(s)
1 pc(s)
1 pc(s)
1 pc(s)
1 pc(s)
1 pc(s)
1 pc(s)
Content per set: 2 cross point glass carriers each (1 set per transom).
Selection of screws
Alternative: individual order (number of screws per cross point glass carrier)
or
163791
Connection
mullion with transom
piece
Screw connection
in mullion
Screw connection in transom
Double-sided
Unilateral
No.
No.
No.
No.
2x 012099
3x 012151
6x 012099
3x 012099
THERM+ H-V
Assembly options
Screw set
no.
Content per set: screws for 2 cross point glass carriers (1 set per transom needed).
Assembly cross point glass carrier set
Assembly cross point glass carrier set
– Assembly double-sided (e. g. in cross point).
– Unilateral assembly (e. g. im the edge region).
The transom piece has to be shortened accordingly.
– Screws have to be ordered separately (see table).
– Screws have to be ordered separately (see table).
KHV-0010
2016
427
THERM+ H-V
Glazing/Sealing technology
Timber curtain wall 50/56/76 mm
Interior sealing system
Curtain wall, standard
■ Technical information
The timber construction must be flush on the glazing side.
Max. misalignment between mullion and transom = ± 0.5 mm.
– Applicable gaskets
- - Gasket for mullion with notching by special tool
(see Processing)
No. 153005
Gasket for mullion 50 V
No. 153105
Gasket for mullion 56 V
No. 153205
Gasket for mullion 76 V
No. 153040 to 153050 Gasket for mullion 50 V polygon
No. 153140 to 153150 Gasket for mullion 56 V polygon
- - Gasket for transom with notching by special tool
(see Processing)
No. 153010
Gasket for transom 50 V
No. 153110
Gasket for transom 56 V
No. 153210
Gasket for transom 76 V
Sealing piece gasket for transom
No. 152012
Transom sealing piece 50 V
No. 152017
Transom sealing piece 56 V
No. 152058
Transom sealing piece 76 V
- PU = 10 pcs.
- Assembly without sealing material.
– T188 = Transom sealing piece.
428
2016
KHV-0601
THERM+ H-V
Glazing/Sealing technology
Timber curtain wall 50/56 mm
Interior sealing system
Curtain wall, expansion mullion for assembling elements
■ Technical information
The timber construction must be flush on the glazing side.
Max. misalignment between mullion and transom = ± 0.5 mm.
– Applicable gaskets
- Gasket for mullion with notching by special tool
(see Processing)
No. 153305 Gasket for mullion 50 H V
No. 153335 Gasket for mullion 56 H V
No. 168220 Insertion profile 16/10 V
- Gasket for transom with notching by special tool
(see Processing)
No. 153010 Gasket for transom 50 V
No. 153110
Gasket for transom 56 V
Sealing piece gasket for transom
No. 152012
Transom sealing piece 50 V
No. 152017
Transom sealing piece 56 V
- PU = 10 pcs.
- Assembly without sealing material.
THERM+ H-V
Assembly options
– T188 = Transom sealing piece.
KHV-0001
2016
429
THERM+ H-V
Glazing/Sealing technology
Timber curtain wall 50/56 mm
Interior sealing system
Curtain wall, gasket for transom with flap
■ Technical information
The timber construction must be flush on the glazing side.
Max. misalignment between mullion and transom = ± 0.5 mm.
– Applicable gaskets
- Gasket for mullion with notching by special tool
(see Processing)
No. 153005
Gasket for mullion 50 V
No. 153105
Gasket for mullion 56 V
No. 153040 to 153050 Gasket for mullion 50 V polygon
No. 153140 to 153150 Gasket for mullion 56 V polygon
- Gasket for transom with notching by special tool
(see Processing)
No. 153015
Gasket for transom 50 V, flap
No. 153115
Gasket for transom 56 V, flap
Sealing piece gasket for transom
No. 152012
Transom sealing piece 50 V
No. 152017
Transom sealing piece 56 V
- PU = 10 pcs.
- Assembly without sealing material.
– T188 = Transom sealing piece.
– T197 = Belay sheet no. 167008.
– T198 = Srew no. 908118.
430
2016
KHV-0002
THERM+ H-V
Glazing/Sealing technology
Timber curtain wall 50/56 mm
Interior sealing system
Curtain wall, base gasket with flap
■ Technical information
The timber construction must be flush on the glazing side.
Max. misalignment between mullion and transom = ± 0.5 mm.
– Applicable gaskets
- Base gasket with notching by special tool
(see Processing)
No. 153020 Base gasket 50 V, flap
No. 153120
Base gasket 56 V, flap
Sealing piece base gasket
No. 152075 Base transom sealing piece V,
applicable for all system width.
- PU = 10 pcs.
- Assembly with sealing material D2, no. 952015.
– T197 = Belay sheet no. 167008.
– T198 = Screw no. 908118.
THERM+ H-V
Assembly options
– T199 = Sealing piece.
KHV-0004
2016
431
THERM+ H-V
Glazing/Sealing technology
Timber curtain wall 50/56 mm
Interior sealing system
Curtain wall, base gasket with flap, version center mullion
■ Technical information
The timber construction must be flush on the glazing side.
Max. misalignment between mullion and transom = ± 0.5 mm.
– Applicable gaskets
Base gasket with notching by special tool
(see Processing)
No. 153020
Base gasket 50 V, flap
No. 153120
Base gasket 56 V, flap
Sealing piece base gasket
No. 152075
Base transom sealing piece V,
applicable for all system width.
- PU = 10 pcs.
- Assembly with sealing material D2, no. 952015.
432
2016
KHV-0007
THERM+ H-V
Glazing/Sealing technology
Timber curtain wall 50/56 mm
Interior sealing system
3 drainage levels
■ Technical information
Interior gaskets for drainage level 1
– T38 = Level 2.
Article
No.
PU
– T39 = Level 3.
Gasket for transom 50 V
153010
40 m
– T40 = Level 1.
Gasket for transom 56 V
153110
40 m
– T151 = Interior gasket E3.
– T152 = Interior gasket E2.
– T153 = Interior gasket E1.
– T159 = Interior gasket E2
with flap.
Interior gaskets for drainage level 2
Article
No.
PU
Interior gasket 50 E2 V
153013
40 m
Interior gasket 50 E2 V, flap
153018
40 m
Interior gasket 56 E2 V
153113
40 m
Interior gasket 56 E2 V, flap
153118
40 m
Interior gaskets for drainage level 3
Article
No.
PU
Interior gasket 50 E3 V
153008
40 m
Interior gasket 56 E3 V
153108
40 m
Article
No.
PU
Transom sealing piece 50 V
152012
10 pc(s)
Transom sealing piece 56 V
152017
10 pc(s)
Transom sealing pieces for drainage level 2
Article
KV-0011
No.
PU
Transom sealing pc 50 E2 V
152013
10 pc(s)
Transom sealing pc 56 E2 V
152018
10 pc(s)
2016
433
THERM+ H-V
Assembly options
Transom sealing pieces for drainage level 1
THERM+ H-V
Glazing/Sealing technology
Timber curtain wall 50/56 mm
Interior sealing system
Curtain wall, drainage level 1 to level 2
■ Technical information
The timber construction must be flush on the glazing side.
Max. misalignment between mullion and transom = ± 0.5 mm.
– Applicable gaskets
- Gasket for transom with notching by special tool
(see Processing)
No. 153010 Gasket for transom 50 V
No. 153110
Gasket for transom 56 V
- Interior gasket with notching by special tool
(see Processing)
No. 153013 Interior gasket 50 E2 V
No. 153113
Interior gasket 56 E2 V
Sealing piece for transom gasket
No. 152012
Transom sealing piece 50 V
No. 152017
Transom sealing piece 56 V
- PU = 10 pcs.
- Assembly without sealing material.
– T38 = Level 2.
– T40 = Level 1.
– T188 = Transom sealing piece.
434
2016
KHV-0006
THERM+ H-V
Glazing/Sealing technology
Timber curtain wall 50/56 mm
Interior sealing system
Curtain wall, drainage level 2 to level 3
■ Technical information
The timber construction must be flush on the glazing side.
Max. misalignment between mullion and transom = ± 0.5 mm.
– Applicable gaskets
- Gasket for transom with notching by special tool
(see Processing)
No. 153008 Interior gasket 50 E3 V
No. 153108 Interior gasket 56 E3 V
- Gasket for transom with notching by special tool
(see Processing)
No. 153013 Interior gasket 50 E2 V
No. 153113
Interior gasket 56 E2 V
Sealing piece for transom gasket
No. 152013
Transom sealing piece 50 E2 V
No. 152018
Transom sealing piece 56 E2 V
- PU = 10 pcs.
- Assembly without sealing material.
– T38 = Level 2.
– T39 = Level 3.
THERM+ H-V
Assembly options
– T188 = Transom sealing piece.
KHV-0005
2016
435
THERM+ H-V
Glazing/Sealing technology
Timber curtain wall 50/56 mm
Interior sealing system
Curtain wall, drainage level 2 to level 3 with flaps
■ Technical information
– Applicable gaskets
- Gasket for mullion with notching by special tool
(see Processing)
No. 153008 Interior gasket 50 E3 V
No. 153108 Interior gasket 56 E3 V
- Gasket for transom with notching by special tool
(see Processing)
No. 153018 Interior gasket 50 E2 V flap
No. 153118
Interior gasket 56 E2 V flap
Sealing piece gasket for transom
No. 152013
Transom sealing piece 50 E2 V
No. 152018
Transom sealing piece 56 E2 V
- PU = 10 pcs.
- Assembly without sealing material.
– T38 = Level 2.
– T39 = Level 3.
– T188 = Transom sealing piece.
– T197 = Belay sheet no. 167008.
– T198 = Screw no. 908118.
436
2016
KHV-0016
THERM+ H-V
Glazing/Sealing technology
Timber curtain wall 50/56 mm
Interior sealing system
Vertical joint
■ Technical information
Selection stainless steel sealing piece
– The joint areas must be sealed carefully with
sealing material D2, no. 952015. The stainless
steel sealing pieces must be fixed with two
screws no. 908118 each.
System width mm
No.
PU
50
167100 10 pc(s)
56
167110 10 pc(s)
– T135 = For system 50.
THERM+ H-V
Assembly options
– T136 = For system 56.
Mullion gasket
KHV-0008
2016
437
THERM+ H-V
Glazing/Sealing technology
Timber curtain wall 50/56 mm
Interior sealing system
Pressure compensation via mullion rebate
■ Technical information
Measure x for the shortening of the sealing piece
– The synthetic sealing piece supports the
ventilation as well as the condensate drainage.
– Shorten the sealing piece according to the
infill thickness (see table) and fix it with a pan
head tapping screw no. 012103.
– Assembly with sealing material D2, no. 952015.
118005
118010
438
2016
013018
013038
013007
013027
013008
013028
013014
24
28
–
28
30
25 to 26
26
30
26
28
27 to 28
24
28
24
26
29 to 30
22
26
22
24
31 to 32
20
24
20
22
33 to 34
18
22
18
20
35 to 36
16
20
16
18
37 to 38
14
18
14
16
39 to 40
12
16
12
14
41 to 42
10
14
10
12
43 to 44
8
12
8
10
45 to 46
6
10
6
8
47 to 48
4
8
4
6
49 to 50
2
6
2
4
51 to 52
0
4
0
2
to
measure x
– For more information see Processing.
Pressure profile no.
Infill
thickness
mm
KV-0010
THERM+ H-V
Glazing/Sealing technology
Timber curtain wall 50/56/76 mm
Exterior sealing system
Pressure profiles and snap-in cover profiles
■ Technical information
Stainless steel cross point sealing plates
self-adhesive, assembly at the glass edge
– T162 = Cross point sealing plate.
No.
– T163 = Sealing piece for pressure profile.
Article
PU
016050
Pressure profiles 50 mm
10 pc(s)
016051
Pressure profiles 56 mm
10 pc(s)
016052
Pressure profiles 76 mm
10 pc(s)
EPDM sealing pieces for pressure profiles
self-adhesive, assembly at the interior side
of the pressure profile
No.
Article
PU
Pressure profiles 50 mm
10 pc(s)
014036
Pressure profiles 56 mm
10 pc(s)
014037
Pressure profiles 76 mm
10 pc(s)
THERM+ H-V
Assembly options
014035
KHV-0200
2016
439
THERM+ H-V
Glazing/Sealing technology
Timber curtain wall 50/56/76 mm
Exterior sealing system
Pressure profiles with visible screw connection
■ Technical information
Stainless steel cross point sealing plates
self-adhesive, assembly at the glass edge
– T162 = Cross point sealing plate.
No.
– T163 = Sealing piece for pressure profile.
Article
PU
016050
Pressure profiles 50 mm
10 pc(s)
016051
Pressure profiles 56 mm
10 pc(s)
016052
Pressure profiles 76 mm
10 pc(s)
EPDM sealing pieces for pressure profiles
self-adhesive, assembly at the interior side
of the pressure profile
No.
440
2016
KHV-0202
Article
PU
014035
Pressure profiles 50 mm
10 pc(s)
014036
Pressure profiles 56 mm
10 pc(s)
014037
Pressure profiles 76 mm
10 pc(s)
THERM+ H-V
Glazing/Sealing technology
Timber curtain wall 50/56/76 mm
Exterior sealing system
Flat pressure profiles
■ Technical information
Stainless steel cross point sealing plates
self-adhesive, assembly at the glass edge
– Notching the end of the transom pressure
profile (dimensions see handling manual).
No.
– T41 = Notching.
016053
– T162 = Cross point sealing plate.
– T163 = Sealing piece for pressure profile.
016054
016055
Article
PU
Flat pressure profile 50
no. 013300
Flat pressure profile 56
no. 013310
Flat pressure profile 76
no. 013313
10 pc(s)
10 pc(s)
10 pc(s)
EPDM sealing pieces for pressure profiles
self-adhesive, assembly at the interior side
of the pressure profile
No.
014038
014039
PU
10 pc(s)
10 pc(s)
10 pc(s)
THERM+ H-V
Assembly options
014041
Article
Flat pressure profile 50
no. 013300
Flat pressure profile 56
no. 013310
Flat pressure profile 76
no. 013313
KHV-0201
2016
441
THERM+ H-V
Glazing/Sealing technology
Timber curtain wall 50/56/76 mm
Exterior sealing system
Assembly of insulating blocks
■ Technical information
– All insulating blocks must be notched with a
special tool at the end of the transom gasket
(A) for assembling the sealing piece for
pressure profile (see Processing).
– The version with insulating blocks 21 and P
must be notched (B) additionally with a special
tool in the area of the glass support (see
Processing).
– PU of the insulating blocks: 50 m.
– T50 = Notching A.
– T51 = Notching B.
– T162 = Cross point sealing plate.
– T163 = Sealing piece for pressure profile.
442
2016
KHV-0203
THERM+ H-V
Glazing/Sealing technology
Timber curtain wall 50/56/76 mm
Exterior sealing system
Cover profile joint curtain wall
A
B
■ Technical information
Selection of interior joint plate and profile joint sealing plate
– Do not joint the pressure profile at the cross point.
Sealing piece
for pressure
profile
no.
Interior
joint plate
no.
Profile joint
sealing plate
no.
013003 (50x15)
014035
167230
016070
013210 (50x20)
014035
167232
016070
141106 (50x30)
014035
167236
016070
– T176 = Pressure profile gasket.
013023 (56x15)
014036
167250
016071
– T177 = Interior joint plate.
013410 (56x20)
014036
167252
016071
– T178 = Profile joint sealing plate.
141307 (56x32)
014036
167257
016071
013610 (76x20)
014037
167272
016072
013050 (76x15)
014037
167270
016072
013615 (76x25)
014037
167274
016072
013620 (76x30)
014037
167276
016072
– T160 = Joint at intermediate range.
– T161 = Joint at the cross point.
– T163 = Sealing piece for pressure profile.
– T174 = Pressure profile.
– T175 = Cover profile.
THERM+ H-V
Assembly options
Cover profile
no.
– Length exterior gasket = length pressure profile + 0.5 %.
K-0016
2016
443
THERM+ H-V
Glazing/Sealing technology
Timber curtain wall 50/56/76 mm
Exterior sealing system
Pressure profile joint curtain wall
■ Technical information
Selection of profile joint sealing plate
– Do not joint the pressure profile at the cross point.
– Length exterior gasket = length pressure profile + 0.5 %.
– T41 = Notching.
– T163 = Sealing piece for pressure profile.
– T174 = Pressure profile.
– T176 = Pressure profiles gasket.
– T178 = Profile joint sealing plate.
444
2016
K-0017, K-0018
Pressure
profile
no.
Profile joint
sealing plate
no.
Sealing piece
for pressure
profile
no.
013300 (50x3)
014038
016073
013310 (56x3)
014039
016074
013313 (76x3)
014041
016075
013008 (50x9)
014035
016070
013007 (50x12)
014035
016070
013028 (56x9)
014036
016071
013027 (56x12)
014036
016071
THERM+ H-V
Glazing/Sealing technology
Timber curtain wall 50/56/76 mm
Exterior sealing system
Cross point sealing plates and transom sealing pieces sloping connection
■ Technical information
Selection of transom sealing piece
– Pressure profiles sealing pieces
No. 014080 to 014085, 152402 to 152422
for self-cutting acc. to angle (90°– α).
Angle α
– Cross point sealing plates
No. 016080 to 016085 for self-cutting
acc. to angle (90°– α). Cutted pieces have
to be plane and burr-free.
90° to 84°
83° to
74° to
59° to
44° to
– T41 = Notch.
– T155 = Transom gasket.
75°
60°
45°
35°
Left
Right
Left E2
Right E2
no.
no.
no.
no.
152012 (50) 152012 (50) 152013 (50) 152013 (50)
152017 (56) 152017 (56) 152018 (56) 152018 (56)
152058 (76) 152058 (76) 152059 (76) 152059 (76)
152058
152058
152059
152059
152033
152036
152060
152063
152034
152037
152061
152064
152035
152038
152062
152065
– T186 = Self-cutting.
– T188 = Transom sealing piece.
Selection cross-point sealing plate
and pressure profile sealing piece (self-cutting acc. to angle)
Exterior gasket
5 mm
System
width
mm
Pressure and cover profile
Pressure
Pressure
Cross point
profile sealing profile sealing
sealing plate Width x
piece
piece
no.
mm
no.
no.
PU = 10 pc(s)
PU = 5 pc(s)
PU = 5 pc(s)
For pressure and cover profile
50
016080
36
014080
56
016081
37
014081
152402
152412
76
016082
39
014082
152422
50
016083
28
014083
56
016084
29
014084
76
016085
31
014085
THERM+ H-V
Assembly options
For flat pressure profile
Flat pressure profile
KV-0009
2016
445
THERM+ H-V
Glazing/Sealing technology
Timber curtain wall 50 mm
Cutting and draw off dimensions
■ Technical information
– RB = Grid width
RH = Grid height.
– T53 = Length pressure profile = RB - 51.
– T54 = Length pressure profile with visible
screwed connection = RB - 51.
– T55 = Length cover profile clipped = RB - 51.
– T56 = Length pressure profile = RB - 55.
– T57 = Glass dimension = RB or RH - 26.
– T58 = Length transom gasket
= RB - 28 + 0.5% add-on.
– T66 = Length base profile = RB - 56.
446
2016
KHV-0800
THERM+ H-V
Glazing/Sealing technology
Timber curtain wall 56 mm
Cutting and draw off dimensions
■ Technical information
– RB = Grid width
RH = Grid height.
– T60 = Length pressure profile = RB - 57.
– T61 = Length pressure profile with visible
screwed connection = RB - 57.
– T62 = Length cover profile clipped = RB - 57.
– T63 = Length pressure profile = RB - 61.
– T64 = Glass dimensions = RB or RH - 30.
– T65 = Length transom gasket
= RB - 34 + 0.5 % add-on.
THERM+ H-V
Assembly options
– T91 = Length of the base profile = RB - 62.
KHV-0801
2016
447
THERM+ H-V
Glazing/Sealing technology
Timber curtain wall 76 mm
Cutting and draw off dimensions
■ Technical information
– RB = Grid width
RH = Grid height.
– T64 = Glass dimensions = RB or RH - 30.
– T93 = Length pressure profile = RB - 81.
– T94 = Glass dimensions = RB or RH - 46.
– T95 = Length transom gasket
= RB - 54 + 0.5% add-on.
– T96 = Length profile = RB - 86.
– T106 = Length of the flat pressure profile
= SW - 77.
– T107 = Length of the cover profile = SW - 77.
Passive house with
insulating block P no. 168526
448
2016
KHV-0802
THERM+ H-V
Glazing/Sealing technology
Timber curtain wall 50/56/76 mm
Screw selection
Pressure profiles with exterior gasket 3 mm
■ Technical information
– For the application of the pressure profile gaskets 4, 6, 7, 8, 9, 11
and 13 extended screws must be used.
Infill tickness
mm
10 to 11
12 to 13
14 to 15
16 to 18
19 to 21
22 to 23
24 to 25
26 to 28
29 to 31
32 to 33
34 to 35
36 to 38
39 to 41
42 to 43
44 to 45
46 to 48
49 to 51
52 to 53
54 to 55
56 to 58
59 to 61
62 to 63
64
No.
012107
012108
012109
012110
012111
012112
012113
012114
012115
012116
012117
012118
012119
012129
012123
012124
012125
012106
012126
012144
012127
012200
012128
Length
mm
25
28
30
32
35
38
40
42
45
48
50
52
55
58
60
62
65
68
70
72
75
78
80
– For pressure profile no. 013007,
013027.
Infill tickness
mm
10
11 to 13
14 to 16
17 to 18
19 to 20
21 to 23
24 to 26
27 to 28
29 to 30
31 to 33
34 to 36
37 to 38
39 to 40
41 to 43
44 to 46
47 to 48
49 to 50
51 to 53
54 to 56
57 to 58
59 to 60
61 to 63
64
No.
012138
012010
012011
012012
012139
012013
012014
012140
012015
012141
012016
012142
012017
012143
012018
012020
012146
012147
012148
012260
012149
012261
012262
KHV-0040
Length
mm
30
32
35
38
40
42
45
48
50
52
55
58
60
62
65
68
70
72
75
78
80
82
85
– For pressure profile no. 013014,
013008, 013028.
Infill tickness
mm
10 to 11
12 to 13
14 to 15
16 to 18
19 to 21
22 to 23
24 to 25
26 to 28
29 to 31
32 to 33
34 to 35
36 to 38
39 to 41
42 to 43
44 to 45
46 to 48
49 to 51
52 to 53
54 to 55
56 to 58
59 to 61
62 to 63
64
No.
012137
012138
012010
012011
012012
012139
012013
012014
012140
012015
012141
012016
012142
012017
012143
012018
012020
012146
012147
012148
012260
012149
012261
2016
Length
mm
28
30
32
35
38
40
42
45
48
50
52
55
58
60
62
65
68
70
72
75
78
80
82
449
THERM+ H-V
Assembly options
– For pressure profile no. 118505,
118510, 118515, 118005, 118010,
118015.
THERM+ H-V
Glazing/Sealing technology
Timber curtain wall 50/56/76/96 mm
Screw selection
Pressure profiles with exterior gasket 5 mm
– For pressure profile no. 013007,
013027.
– For pressure profile no. 013014,
013008, 013028.
5
– For pressure profile no. 118005,
118010, 118015.
Infill tickness
mm
10
11 to 12
13 to 14
15 to 17
18 to 20
21 to 22
23 to 24
25 to 27
28 to 30
31 to 32
33 to 34
35 to 37
38 to 40
41 to 42
43 to 44
45 to 47
48 to 50
51 to 52
53 to 54
55 to 57
58 to 60
61 to 62
63 to 64
450
2016
No.
012107
012108
012109
012110
012111
012112
012113
012114
012115
012116
012117
012118
012119
012129
012123
012124
012125
012106
012126
012144
012127
012200
012128
Length
mm
25
28
30
32
35
38
40
42
45
48
50
52
55
58
60
62
65
68
70
72
75
78
80
Infill tickness
mm
10 to 12
13 to 15
16 to 17
18 to 19
20 to 22
23 to 25
26 to 27
28 to 29
30 to 32
33 to 35
36 to 37
38 to 39
40 to 42
43 to 45
46 to 47
48 to 49
50 to 52
53 to 55
56 to 57
58 to 59
60 to 62
63 to 64
No.
012010
012011
012012
012139
012013
012014
012140
012015
012141
012016
012142
012017
012143
012018
012020
012146
012147
012148
012260
012149
012261
012262
KHV-0064
Length
mm
32
35
38
40
42
45
48
50
52
55
58
60
62
65
68
70
72
75
78
80
82
85
Infill tickness
mm
10
11 to 12
13 to 14
15 to 17
18 to 20
21 to 22
23 to 24
25 to 27
28 to 30
31 to 32
33 to 34
35 to 37
38 to 40
41 to 42
43 to 44
45 to 47
48 to 50
51 to 52
53 to 54
55 to 57
58 to 60
61 to 62
63 to 64
No.
012137
012138
012010
012011
012012
012139
012013
012014
012140
012015
012141
012016
012142
012017
012143
012018
012020
012146
012147
012148
012260
012149
012261
Length
mm
28
30
32
35
38
40
42
45
48
50
52
55
58
60
62
65
68
70
72
75
78
80
82
THERM+ H-V
Glazing/Sealing technology
Timber curtain wall 50/56/76 mm
Screw selection
Flat pressure profiles with exterior gasket 2 mm
Infill tickness
mm
18
19 to 20
21 to 22
23 to 25
26 to 28
29 to 30
31 to 32
33 to 35
36 to 38
39 to 40
41 to 42
43 to 45
46 to 48
49 to 50
51 to 52
53 to 55
56 to 58
59 to 60
61 to 62
63 to 64
No.
012136
012137
012138
012010
012011
012012
012139
012013
012014
012140
012015
012141
012016
012142
012017
012143
012018
012020
012146
012147
Length
mm
25
28
30
32
35
38
40
42
45
48
50
52
55
58
60
62
65
68
70
72
– For pressure profile no. 013300,
013310, 013313.
Infill tickness
mm
18
19 to 20
21 to 23
24 to 26
27 to 28
29 to 30
31 to 33
34 to 36
37 to 38
39 to 40
41 to 43
44 to 46
47 to 48
49 to 50
51 to 53
54 to 56
57 to 58
59 to 60
61 to 63
64
No.
012171
012172
012173
012174
012175
012176
012177
012178
012179
012180
012181
012182
012183
012184
012185
012186
012190
012187
012192
012188
KHV-0042
Length
mm
28
30
32
35
38
40
42
45
48
50
52
55
58
60
62
65
68
70
72
75
– For pressure profile no. 013300,
013310, 013313.
Infill tickness
mm
18 to 19
20 to 22
23 to 24
25 to 26
27 to 29
30 to 32
33 to 34
35 to 36
37 to 39
40 to 42
43 to 44
45 to 46
47 to 49
50 to 52
53 to 54
55 to 56
57 to 59
60 to 62
63 to 64
No.
012107
012108
012109
012110
012111
012112
012113
012114
012115
012116
012117
012118
012119
012129
012123
012124
012125
012106
012126
2016
Length
mm
25
28
30
32
35
38
40
42
45
48
50
52
55
58
60
62
65
68
70
451
THERM+ H-V
Assembly options
– For pressure profile no. 013300,
013310, 013313.
THERM+ H-V
Glazing/Sealing technology
Timber curtain wall 50/56 mm
Screw selection
Glazing with silicone joint and suction discs
– For suction disc no. 163807,
163810, 163812.
Infill tickness
mm
RAL 9004
No.
20 to 21
22 to 23
24 to 25
26 to 27
28 to 29
30 to 31
32 to 33
34 to 35
36 to 37
38 to 39
40 to 41
42 to 43
44 to 45
46 to 47
48 to 49
50 to 51
52 to 53
54 to 55
56 to 57
58 to 60
61 to 63
64
907202
907204
907206
907208
907210
907212
907214
907216
907218
907220
907222
907224
907226
907228
907230
907232
907234
907236
907238
907240
907242
907244
452
2016
Stainless
steel
No.
907252
907254
907256
907258
907260
907262
907264
907266
907268
907270
907272
907274
907276
907278
907280
907282
907284
907286
907288
907290
907292
907294
Length
mm
36
39
41
43
45
47
49
51
53
55
57
59
61
63
65
67
69
71
73
75
78
81
KHV-0062
THERM+ H-V
Accessories
Timber curtain wall 50/56/76 mm
Fixation of sun protection
Assembly and information
■ Technical information
Selection of sockets
– The fixation of the sun protection can be used
for all system widths and pressure and cover profiles.
No.
– Assembling at any time, even at existing curtain walls.
– For the selection of stainless steel sockets see table.
The length results from the selection of pressure and
cover profiles as well as from the infill thickness (detailed
information see handling manual).
– Applied load figures see following pages.
– Max. usability force FH regarding to one pair of sockets.
– Max. usability force FH is constant at every load distance → FH = 0.80 kN.
– A force crosswise to the mullion cannot be taken → FQ = 0 kN.
– The indicated loads are dimensioning loads.
– A connection plate by the customer (min. 40 x 10 mm) is used for leading
the forces into the the screws.
– The screws 5.5 has to be bolted with a bolting torque of min. 8 Nm.
– The fixation of sun protection can only be used by pairs.
– For each assembling situation a statical calculation is mandatory.
The influencing variables according to EUROCODE 1 and DIN 1055
have to be considered.
– T13 = Infill thickness.
– T33 = Fixation of sun protection.
169942
169946
169950
169954
169958
169962
169966
169970
169974
169978
169982
169986
169990
169994
169998
169999
Length
mm
42
46
50
54
58
62
66
70
74
78
82
86
90
94
98
102
Selection of sleeves
No.
169900
169901
169902
169903
169904
169905
169906
169907
169908
169909
169910
169911
169912
169913
169914
169915
169917
169918
169919
Length
mm
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
42
44
46
– T34 = Length of socket.
– T35 = Offset point of application a.
– T185 = Dimensioning example for connection plate provided by customer.
THERM+ H-V
Assembly options
– T224 = See table.
ZHV-1021
2016
453
THERM+ H-V
Accessories
Timber curtain wall 50/56/76 mm
Fixation of sun protection
Screw distance 90 mm
Vertical force in use F [kN]
■ Technical information
1.15
Calculation basis:
1.10
1.05
– Horizontal force FH: 0,8 kN.
1.00
– Thickness of connection plate: 10 mm.
0.95
– Material connection plate:
aluminium.
0.90
0.85
0.80
– Assembling and additional information see
previous page.
0.75
0.70
– a = Offset point of application
0.65
0.60
0.55
0.50
0.45
0.40
0.35
0.30
Length of
socket [mm]
Screw distance 130 mm
Screw distance 110 mm
Vertical force in use F [kN]
Vertical force in use F [kN]
1.15
1.15
1.10
1.10
1.05
1.05
1.00
1.00
0.95
0.95
0.90
0.90
0.85
0.85
0.80
0.80
0.75
0.75
0.70
0.70
0.65
0.65
0.60
0.60
0.55
0.55
0.50
0.50
0.45
0.45
0.40
0.40
0.35
0.35
0.30
0.30
Length of
socket [mm]
Length of
socket [mm]
Screw distance 150 mm
Screw distance 170 mm
Vertical force in use F [kN]
Vertical force in use F [kN]
1.15
1.15
1.10
1.10
1.05
1.05
1.00
1.00
0.95
0.95
0.90
0.90
0.85
0.85
0.80
0.80
0.75
0.75
0.70
0.70
0.65
0.65
0.60
0.60
0.55
0.55
0.50
0.50
0.45
0.45
0.40
0.40
0.35
0.35
0.30
0.30
Length of
socket [mm]
454
2016
ZHV-1020
Length of
socket [mm]
THERM+ H-V
Accessories
Timber curtain wall 50/56/76 mm
Fixation of sun protection for cover profiles 12 mm
Exterior gasket 3 mm
■ Technical information
– Pressure profiles:
No. 118005 (50 mm)
No. 118010 (56 mm)
No. 118015 (76 mm)
– Cover profiles:
No. 013004 (50 mm)
No. 013024 (56 mm)
No. 013051 (76 mm)
– T74 = Infill thickness
Infill thickness
mm
20 to 22
23 to 24
25 to 26
27 to 28
29 to 30
31 to 32
33 to 34
35 to 36
37 to 38
39 to 40
41 to 42
43 to 44
45 to 46
47 to 48
49 to 50
51 to 52
53 to 54
55 to 56
57 to 58
59 to 60
61 to 62
63 to 64
ZHV-1000
No. socket
No. sealing sleeve
169946
169950
169950
169954
169954
169958
169958
169962
169962
169966
169966
169970
169970
169974
169974
169978
169978
169982
169982
169986
169986
169990
169904
169904
169903
169904
169903
169904
169903
169904
169903
169904
169903
169904
169903
169904
169903
169904
169903
169904
169903
169904
169903
169904
2016
THERM+ H-V
Assembly options
T74
■ List of sockets and sealing sleeves
455
THERM+ H-V
Accessories
Timber curtain wall 50/56/76 mm
Fixation of sun protection for cover profiles 12 mm
Exterior gasket 5 mm
■ Technical information
– Pressure profiles:
No. 118005 (50 mm)
No. 118010 (56 mm)
No. 118015 (76 mm)
– Cover profiles:
No. 013004 (50 mm)
No. 013024 (56 mm)
No. 013051 (76 mm)
– T74 = Infill thickness
■ List of sockets and sealing sleeves
T74
Infill thickness
mm
20 to 21
22 to 23
24 to 25
26 to 27
28 to 29
30 to 31
32 to 33
34 to 35
36 to 37
38 to 39
40 to 41
42 to 43
44 to 45
46 to 47
48 to 49
50 to 51
52 to 53
54 to 55
56 to 57
58 to 59
60 to 61
62 to 63
64
456
2016
ZHV-1000
No. socket
No. sealing sleeve
169946
169950
169950
169954
169954
169958
169958
169962
169962
169966
169966
169970
169970
169974
169974
169978
169978
169982
169982
169986
169986
169990
169990
169903
169904
169903
169904
169903
169904
169903
169904
169903
169904
169903
169904
169903
169904
169903
169904
169903
169904
169903
169904
169903
169904
169903
THERM+ H-V
Accessories
Timber curtain wall 50/56/76 mm
Fixation of sun protection for cover profiles 15 mm
Exterior gasket 3 mm
■ Technical information
– Pressure profiles:
No. 118005 (50 mm)
No. 118010 (56 mm)
No. 118015 (76 mm)
– Cover profiles:
No. 013003 (50 mm)
No. 013023 (56 mm)
No. 013050 (76 mm)
– T74 = Infill thickness
■ List of sockets and sealing sleeves
ZHV-1001
No. socket
No. sealing sleeve
169950
169950
169950
169954
169954
169954
169958
169958
169958
169962
169962
169962
169966
169966
169966
169970
169970
169970
169974
169974
169974
169978
169978
169978
169982
169982
169982
169986
169986
169986
169990
169990
169990
169994
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
2016
THERM+ H-V
Assembly options
T74
Infill thickness
mm
20
21 to 22
23
24
25 to 26
27
28
29 to 30
31
32
33 to 34
35
36
37 to 38
39
40
41 to 42
43
44
45 to 46
47
48
49 to 50
51
52
53 to 54
55
56
57 to 58
59
60
61 to 62
63
64
457
THERM+ H-V
Accessories
Timber curtain wall 50/56/76 mm
Fixation of sun protection for cover profiles 15 mm
Exterior gasket 5 mm
■ Technical information
– Pressure profiles:
No. 118005 (50 mm)
No. 118010 (56 mm)
No. 118015 (76 mm)
– Cover profiles:
No. 013003 (50 mm)
No. 013023 (56 mm)
No. 013050 (76 mm)
– T74 = Infill thickness
■ List of sockets and sealing sleeves
T74
Infill thickness
mm
20 to 21
22
23
24 to 25
26
27
28 to 29
30
31
32 to 33
34
35
36 to 37
38
39
40 to 41
42
43
44 to 45
46
47
48 to 49
50
51
52 to 53
54
55
56 to 57
58
59
60 to 61
62
63
64
458
2016
ZHV-1001
No. socket
No. sealing sleeve
169950
169950
169954
169954
169954
169958
169958
169958
169962
169962
169962
169966
169966
169966
169970
169970
169970
169974
169974
169974
169978
169978
169978
169982
169982
169982
169986
169986
169986
169990
169990
169990
169994
169994
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
THERM+ H-V
Accessories
Timber curtain wall 50/56/76 mm
Fixation of sun protection for cover profiles 20 mm
Exterior gasket 3 mm
■ Technical information
– Pressure profiles:
No. 118005 (50 mm)
No. 118010 (56 mm)
No. 118015 (76 mm)
– Cover profiles:
No. 013210 (50 mm)
No. 013410 (56 mm)
No. 013610 (76 mm)
– T74 = Infill thickness
■ List of sockets and sealing sleeves
ZHV-1002
No. socket
No. sealing sleeve
169954
169954
169958
169958
169958
169962
169962
169962
169966
169966
169966
169970
169970
169970
169974
169974
169974
169978
169978
169978
169982
169982
169982
169986
169986
169986
169990
169990
169990
169994
169994
169994
169998
169998
169908
169907
169909
169908
169907
169909
169908
169907
169909
169908
169907
169909
169908
169907
169909
169908
169907
169909
169908
169907
169909
169908
169907
169909
169908
169907
169909
169908
169907
169909
169908
169907
169909
169908
2016
THERM+ H-V
Assembly options
Infill thickness
mm
20 to 21
22
23
24 to 25
26
27
28 to 29
30
31
32 to 33
34
35
36 to 37
38
39
40 to 41
42
43
44 to 45
46
47
48 to 49
50
51
52 to 53
54
55
56 to 57
58
59
60 to 61
62
63
64
459
THERM+ H-V
Accessories
Timber curtain wall 50/56/76 mm
Fixation of sun protection for cover profiles 20 mm
Exterior gasket 5 mm
■ Technical information
– Pressure profiles:
No. 118005 (50 mm)
No. 118010 (56 mm)
No. 118015 (76 mm)
– Cover profiles:
No. 013210 (50 mm)
No. 013410 (56 mm)
No. 013610 (76 mm)
– T74 = Infill thickness
■ List of sockets and sealing sleeves
Infill thickness
mm
20
21
22
23 to 24
25
26
27 to 28
29
30
31 to 32
33
34
35 to 36
37
38
39 to 40
41
42
43 to 44
45
46
47 to 48
49
50
51 to 52
53
54
55 to 56
57
58
59 to 60
61
62
63 to 64
460
2016
ZHV-1002
No. socket
No. sealing sleeve
169954
169954
169958
169958
169958
169962
169962
169962
169966
169966
169966
169970
169970
169970
169974
169974
169974
169978
169978
169978
169982
169982
169982
169986
169986
169986
169990
169990
169990
169994
169994
169994
169998
169998
169908
169907
169909
169908
169907
169909
169908
169907
169909
169908
169907
169909
169908
169907
169909
169908
169907
169909
169908
169907
169909
169908
169907
169909
169908
169907
169909
169908
169907
169909
169908
169907
169909
169908
THERM+ H-V
Accessories
Timber curtain wall 50/56/76 mm
Fixation of sun protection for cover profiles 25 mm
Exterior gasket 3 mm
■ Technical information
– Pressure profiles:
No. 118005 (50 mm)
No. 118010 (56 mm)
– Cover profiles:
No. 013005 (50 mm)
No. 013025 (56 mm)
No. 013201 (50 mm)
No. 013400 (56 mm)
No. 141505 (76 mm)
– T74 = Infill thickness
■ List of sockets and sealing sleeves
No. sealing sleeve
169954
169958
169958
169962
169962
169966
169966
169970
169970
169974
169974
169978
169978
169982
169982
169986
169986
169990
169990
169994
169994
169998
169998
169908
169909
169908
169909
169908
169909
169908
169909
169908
169909
169908
169909
169908
169909
169908
169909
169908
169909
169908
169909
169908
169909
169908
THERM+ H-V
Assembly options
No. socket
T74
Infill thickness
mm
20 to 21
22 to 23
24 to 25
26 to 27
28 to 29
30 to 31
32 to 33
34 to 35
36 to 37
38 to 39
40 to 41
42 to 43
44 to 45
46 to 47
48 to 49
50 to 51
52 to 53
54 to 55
56 to 57
58 to 59
60 to 61
62 to 63
64
ZHV-1006
2016
461
THERM+ H-V
Accessories
Timber curtain wall 50/56/76 mm
Fixation of sun protection for cover profiles 25 mm
Exterior gasket 5 mm
■ Technical information
– Pressure profiles:
No. 118005 (50 mm)
No. 118010 (56 mm)
– Cover profiles:
No. 013005 (50 mm)
No. 013025 (56 mm)
No. 013201 (50 mm)
No. 013400 (56 mm)
No. 141505 (76 mm)
– T74 = Infill thickness
■ List of sockets and sealing sleeves
T74
Infill thickness
mm
20
21 to 22
23 to 24
25 to 26
27 to 28
29 to 30
31 to 32
33 to 34
35 to 36
37 to 38
39 to 40
41 to 42
43 to 44
45 to 46
47 to 48
49 to 50
51 to 52
53 to 54
55 to 56
57 to 58
59 to 60
61 to 62
63 to 64
462
2016
ZHV-1006
No. socket
No. sealing sleeve
169954
169958
169958
169962
169962
169966
169966
169970
169970
169974
169974
169978
169978
169982
169982
169986
169986
169990
169990
169994
169994
169998
169998
169908
169909
169908
169909
169908
169909
169908
169909
169908
169909
169908
169909
169908
169909
169908
169909
169908
169909
169908
169909
169908
169909
169908
THERM+ H-V
Accessories
Timber curtain wall 50/56 mm
Fixation of sun protection for pressure profiles 9 mm
Exterior gasket 3 mm
■ Technical information
– Pressure profiles:
No. 013008 (50 mm)
No. 013028 (56 mm)
– T74 = Infill thickness
Infill thickness
mm
20
21 to 22
23 to 24
25 to 26
27 to 28
29 to 30
31 to 32
33 to 34
35 to 36
37 to 38
39 to 40
41 to 42
43 to 44
45 to 46
47 to 48
49 to 50
51 to 52
53 to 54
55 to 56
57 to 58
59 to 60
61 to 62
63 to 64
ZHV-1008
No. socket
No. sealing sleeve
169946
169946
169950
169950
169954
169954
169958
169958
169962
169962
169966
169966
169970
169970
169974
169974
169978
169978
169982
169982
169986
169986
169990
169901
169900
169901
169900
169901
169900
169901
169900
169901
169900
169901
169900
169901
169900
169901
169900
169901
169900
169901
169900
169901
169900
169901
2016
THERM+ H-V
Assembly options
T74
16 - 19
■ List of sockets and sealing sleeves
463
THERM+ H-V
Accessories
Timber curtain wall 50/56 mm
Fixation of sun protection for pressure profiles 9 mm
Exterior gasket 5 mm
■ Technical information
– Pressure profiles:
No. 013008 (50 mm)
No. 013028 (56 mm)
– T74 = Infill thickness
■ List of sockets and sealing sleeves
T74
16 - 19
Infill thickness
mm
20 to 21
22 to 23
24 to 25
26 to 27
28 to 29
30 to 31
32 to 33
34 to 35
36 to 37
38 to 39
40 to 41
42 to 43
44 to 45
46 to 47
48 to 49
50 to 51
52 to 53
54 to 55
56 to 57
58 to 59
60 to 61
62 to 63
64
464
2016
ZHV-1008
No. socket
No. sealing sleeve
169946
169950
169950
169954
169954
169958
169958
169962
169962
169966
169966
169970
169970
169974
169974
169978
169978
169982
169982
169986
169986
169990
169990
169900
169901
169900
169901
169900
169901
169900
169901
169900
169901
169900
169901
169900
169901
169900
169901
169900
169901
169900
169901
169900
169901
169900
THERM+ H-V
Accessories
Timber curtain wall 50/56 mm
Fixation of sun protection for pressure profiles 12 mm
Exterior gasket 3 mm
■ Technical information
– Pressure profiles:
No. 013007 (50 mm)
No. 013027 (56 mm)
– T74 = Infill thickness
Infill thickness
mm
20 to 21
22 to 23
24 to 25
26 to 27
28 to 29
30 to 31
32 to 33
34 to 35
36 to 37
38 to 39
40 to 41
42 to 43
44 to 45
46 to 47
48 to 49
50 to 51
52 to 53
54 to 55
56 to 57
58 to 59
60 to 61
62 to 63
64
ZHV-1003
No. socket
No. sealing sleeve
169950
169950
169954
169954
169958
169958
169962
169962
169966
169966
169970
169970
169974
169974
169978
169978
169982
169982
169986
169986
169990
169990
169994
169901
169900
169901
169900
169901
169900
169901
169900
169901
169900
169901
169900
169901
169900
169901
169900
169901
169900
169901
169900
169901
169900
169901
2016
THERM+ H-V
Assembly options
T74
■ List of sockets and sealing sleeves
465
THERM+ H-V
Accessories
Timber curtain wall 50/56 mm
Fixation of sun protection for pressure profiles 12 mm
Exterior gasket 5 mm
■ Technical information
– Pressure profiles:
No. 013007 (50 mm)
No. 013027 (56 mm)
– T74 = Infill thickness
■ List of sockets and sealing sleeves
T74
Infill thickness
mm
20
21 to 22
23 to 24
25 to 26
27 to 28
29 to 30
31 to 32
33 to 34
35 to 36
37 to 38
39 to 40
41 to 42
43 to 44
45 to 46
47 to 48
49 to 50
51 to 52
53 to 54
55 to 56
57 to 58
59 to 60
61 to 62
63 to 64
466
2016
ZHV-1003
No. socket
No. sealing sleeve
169950
169950
169954
169954
169958
169958
169962
169962
169966
169966
169970
169970
169974
169974
169978
169978
169982
169982
169986
169986
169990
169990
169994
169901
169900
169901
169900
169901
169900
169901
169900
169901
169900
169901
169900
169901
169900
169901
169900
169901
169900
169901
169900
169901
169900
169901
THERM+ H-V
Accessories
Timber curtain wall 50 mm
Fixation of sun protection for pressure profiles 25 mm
Exterior gasket 3 mm
■ Technical information
– Pressure profiles:
No. 013014 (50 mm)
– T74 = Infill thickness
Infill thickness
mm
20
21
22
23 to 24
25
26
27 to 28
29
30
31 to 32
33
34
35 to 36
37
38
39 to 40
41
42
43 to 44
45
46
47 to 48
49
50
51 to 52
53
54
55 to 56
57
58
59 to 60
61
62
63 to 64
ZHV-1007
No. socket
No. sealing sleeve
169954
169954
169958
169958
169958
169962
169962
169962
169966
169966
169966
169970
169970
169970
169974
169974
169974
169978
169978
169978
169982
169982
169982
169986
169986
169986
169990
169990
169990
169994
169994
169994
169998
169998
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
2016
THERM+ H-V
Assembly options
T74
■ List of sockets and sealing sleeves
467
THERM+ H-V
Accessories
Timber curtain wall 50 mm
Fixation of sun protection for pressure profiles 25 mm
Exterior gasket 5 mm
■ Technical information
– Pressure profiles:
No. 013014 (50 mm)
– T74 = Infill thickness
■ List of sockets and sealing sleeves
T74
Infill thickness
mm
20
21
22 to 23
24
25
26 to 27
28
29
30 to 31
32
33
34 to 35
36
37
38 to 39
40
41
42 to 43
44
45
46 to 47
48
49
50 to 51
52
53
54 to 55
56
57
58 to 59
60
61
62 to 63
64
468
2016
ZHV-1007
No. socket
No. sealing sleeve
169954
169958
169958
169958
169962
169962
169962
169966
169966
169966
169970
169970
169970
169974
169974
169974
169978
169978
169978
169982
169982
169982
169986
169986
169986
169990
169990
169990
169994
169994
169994
169998
169998
169998
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
169906
169905
169904
THERM+ H-V
Accessories
Timber curtain wall 50/56/76 mm
Fixation of sun protection for flat pressure profiles
Exterior gasket 2 mm
■ Technical information
– Pressure profiles:
No. 013300 (50 mm)
No. 013310 (56 mm)
No. 013313 (76 mm)
– T74 = Infill thickness
Infill thickness
mm
24 to 25
26 to 27
28 to 29
30 to 31
32 to 33
34 to 35
36 to 37
38 to 39
40 to 41
42 to 43
44 to 45
46 to 47
48 to 49
50 to 51
52 to 53
54 to 55
56 to 57
58 to 59
60 to 61
62 to 63
64
ZHV-1009
No. socket
No. sealing sleeve
169942
169946
169946
169950
169950
169954
169954
169958
169958
169962
169962
169966
169966
169970
169970
169974
169974
169978
169978
169982
169982
169900
169901
169900
169901
169900
169901
169900
169901
169900
169901
169900
169901
169900
169901
169900
169901
169900
169901
169900
169901
169900
2016
THERM+ H-V
Assembly options
T74
■ List of sockets and sealing sleeves
469
THERM+ H-V
Accessories
Timber curtain wall 50/56/76 mm
Assembly scaffolding anchors
■ Technical information
Selection of fastening screws
– The base profile ist screwed to the
scaffolding anchors range in addition.
– Scaffolding fixation no. 166240 with
screw no. 012108.
– Expansion structure profile cannot take
forces right-angled to the structural profile (Frt).
– Please order additionally:
- 1 halfen screw no. 907605.
- 1 cover 15 white no. 167075
or
- 1 cover 15 black no. 167076.
– Application of flat pressure profile possible
from an infill thickness of 28 mm.
– The number and position of the fixation points
depends on the specific requirements of the scaffold.
The max. load transmission into the curtain wall
construction is system immanent and can be taken
from the table Representative parameter.
Representative parameter
– T182 = Assembly scaffolding anchor.
– T183 = Offset posts.
– T184 = Height of scaffold.
470
2016
ZHV-0007
Right-angled
to structural
profile Frt
Parallel
to structural
profile Fpt
Right-angled
to curtain wall
Frf
0.47 kN
4.53 kN
8.81 kN
THERM+ H-V
Accessories
Timber curtain wall 50/56/76 mm
Fixture unit
■ Technical information
– Assembling the fixture unit
no. 166210 with:
3 pc. screws no. 908655 (PU = 100 pcs.).
6 pc. screws no. 908020 (PU = 100 pcs.).
– Fixation in consideration of construction
circumstances and statical requirements.
– For each assembling situation a statical
calculation is mandatory. The influencing
variables of DIN 1055 has to be considered.
– Please consider several international, national,
regional and local laws and rules.
– The common and accepted rules of technique
has to be considered.
– T68 = Offset action point a.
Additional loads
Vertical load Fv in combination with horizontal load Fh
(offset action point a = 100)
Fv [kN]
6.5
6.0
5.0
4.0
3.0
2.0
1.5
1.0
Fh [kN]
0.4
0.8
1.8
2.7
3.7
4.6
5.1
5.6
Vertical load Fv in combination with
horizontal load Fh (offset action point a = 180)
Fv [kN]
3.5
3.0
2.5
2.0
1.5
1.0
Fh [kN]
0.5
1.4
2.3
3.1
4.0
4.8
Diagonal pull Fd in consideration
of angle α (offset action point a = 100)
α [°]
50
45
40
35
30
Fd [kN]
4.7
4.7
4.8
4.8
4.9
– T69 = Fixation bracket.
– T164 = Finished situation.
THERM+ H-V
Assembly options
– T165 = Illustration without glass
and exterior gasket.
ZHV-0006
2016
471
THERM+ H-V
Accessories
Timber curtain wall 50/56/76 mm
Connection profiles for transom and mullion gasket
Connection with gasket without flap
■ Technical information
– Bolted with no. 908118.
– *Gasket easy to tear off to 3 / 7 / 9 mm.
– ** With sheet t = 3 mm (self-production)
instead of no. 051012 (t = 2.2 mm).
– T13 = Infill thickness.
472
2016
Selection of gaskets and profiles
Infill
thickness
mm
24
25**
26
27
28
29
30
31
32
33
34
35**
36
37
38
39
40
41
42
43
44
45**
46
47
48
49
50
51
52
53
54
55**
56
57
58
59
60
61
62
63
64
ZHV-0011
Compensation
gasket
no.
–
–
227010
227032
227015
227032
227020
227032
227025
227032
227030
–
227010
227032
227015
227032
227020
227032
227025
227032
–
–
227010
227032
227015
227032
227020
227032
227025
227032
227030
–
227010
227032
227015
227032
227020
227032
227025
227032
227030
Compensation
profile
no.
–
–
–
–
–
–
–
–
–
–
–
227006
227006
227006
227006
227006
227006
227006
227006
227006
–
–
–
–
–
–
–
–
–
–
–
227006
227006
227006
227006
227006
227006
227006
227006
227006
227006
Connection
profile
no.
168023
(50/56)
168028
(76)
168040
(50/56)
168044
(76)
THERM+ H-V
Accessories
Timber curtain wall 50/56/76 mm
Connection profiles for transom and mullion gasket
Base point connection with gasket and flap
■ Technical information
– T248 = Compensation gasket.
Connection profile no. 168005 with 2 mm sheet
Connection profile no. 168005 with 3 mm sheet
Selection compensation gasket
Selection compensation gasket
Gasket
No.
–
011080
011070
011077
011073
011076
011074
011071
011075
011072
011078
No.
Infill thickness
mm
25
27
28
29
30
31
32
33
34
36
38
PU
–
100 m
100 m
100 m
100 m
100 m
100 m
100 m
100 m
100 m
50 m
No.
No.
No.
Gasket
No.
–
011080
011070
011077
011073
011076
011074
011071
011075
011072
011078
PU
–
100 m
100 m
100 m
100 m
100 m
100 m
100 m
100 m
100 m
50 m
THERM+ H-V
Assembly options
Infill thickness
mm
24
26
27
28
29
30
31
32
33
35
37
No.
No.
168005
No.
No.
No.
No.
ZHV-0001
No.
2016
473
THERM+ H-V
Accessories
Timber curtain wall 50/56/76 mm
Connection profiles
Connection frame profile
■ Technical information
Selection of articles
– Connection profile no. 168080:
- Continuous insertion for bottom and top connection.
- Cut out in mullion area for drainage/ventilation.
Article
– Observe the different rates of thermal expansion for the
screw connection of the aluminium window sill with the
synthetic connection profile.
474
2016
ZHV-0008
No.
PU
Connection profile 55/15
168080
6m
Connection profile 39/22 V
168023
6m
Connection profile 48/22 V
168028
6m
Connection profile 39/42 V
168040
6m
Connection profile 48/42 V
168044
6m
THERM+ H-V
Accessories
Timber curtain wall 50/56/76 mm
Connection profiles
Ventilated/non-ventilated façade
■ Technical information
List of glass thickness compensation
– Max. weight of the pane at the connection profile: 50 kg.
Difference
allowed
mm
– For higher offsets between the two infill thicknesses
(infill thickness 1 – infill thickness 2) the compensation
profile 12 no. 013090, compensation height 12 mm,
may be used. (PU = 6 m).
18
19
20
21
22
23
24
25
26
27
28
– IT = Infill thickness.
– For more information see Processing.
Compensation gasket
No.
011070
011077
011073
011076
011074
011071
011075
–
011072
–
011078
Height
mm
3
4
5
6
7
8
9
–
11
–
13
PU
100 m
–
100 m
–
50 m
THERM+ H-V
Assembly options
Difference D between the two glass infill thicknesses is
necessary for the selection.
(D = IT1 minus IT2; IT1 = 20 to 64 mm, IT2 = 2 to 46 mm).
IT 2
No. 168060
IT 1
ZHV-0003
2016
475
THERM+ H-V
Accessories
Timber curtain wall 50/56/76 mm
Connection profiles
Terminal clamp as assembly aid for sheets and profiles
■ Technical information
– Applicable as an assembly aid or for the fixation
of sheets and connection profiles at hard-toreach places.
– Clamp thickness 1.5 to 3 mm.
– Fixation with a suitable screw for hole Ø 6 mm.
476
2016
ZHV-0005
THERM+ H-V
Accessories
Timber curtain wall 50/56 mm
Connection profiles
Fixture spring – interior compensation of different infill thicknesses
■ Technical information
– Table for the selection of the compensation
gasket see following page.
– Reduced glass weights have to be obtained
in individual cases
THERM+ H-V
Assembly options
– T13 = Infill thickness (IT).
ZHV-0012
2016
477
478
2016
220327 220326 220325 220324 220323 220322 220321 220320
26
64
62
60
58
56
54
52
50
48
46
44
42
40
38
36
34
32
30
18
20
22
24
26
30
32
34
36
38
40
42
44
46
48
50
52
54
220327 220326 220325 220324 220323 220322 220321 220320
220327 220326 220325 220324 220323 220322 220321 220320
220327 220326 220325 220324 220323 220322 220321 220320
220327 220326 220325 220324 220323 220322 220321 220320
220327 220326 220325 220324 220323 220322 220321 220320
220327 220326 220325 220324 220323 220322 220321 220320
220327 220326 220325 220324 220323 220322 220321 220320
220327 220326 220325 220324 220323 220322 220321 220320
220327 220326 220325 220324 220323 220322 220321 220320
220327 220326 220325 220324 220323 220322 220321 220320
220327 220326 220325 220324 220323 220322 220321 220320
220327 220326 220325 220324 220323 220322 220321 220320
220327 220326 220325 220324 220323 220322 220321 220320
220327 220326 220325 220324 220323 220322 220321 220320
28
IT 2 (mm)
220327 220326 220325 220324 220323 220322 220321 220320
220327 220326 220325 220324 220323 220322 220321 220320
220327 220326 220325 220324 220323 220322 220321 220320
220327 220326 220325 220324 220323 220322 220321 220320
220327 220326 220325 220324 220323 220322 220321 220320
220326 220325 220324 220323 220322 220321 220320
28
220325 220324 220323 220322 220321 220320
16
24
14
22
12
220324 220323 220322 220321 220320
10
20
8
220323 220322 220321 220320
6
220322 220321 220320
4
18
2
16
IT 1
(mm)
Selection compensation gasket
THERM+ H-V
Accessories
Timber curtain wall 50/56 mm
Connection profiles
Table for the selection of compensation gasket
THERM+ H-V
Accessories
Timber curtain wall 50/56 mm
Connection profiles
Stainless steel retainer for panel fixing
■ Technical information
Selection of retainer
– For fixing the panel before assembling
the pressure profile.
Infill
thickness
mm
24
25 to 26
27 to 28
29 to 30
31 to 32
33 to 34
35 to 36
37 to 38
39 to 40
41 to 42
43 to 44
45 to 46
47 to 48
59 to 50
51 to 52
– Retainer may stay at glass rebate.
167167
167169
167171
167173
167175
167177
167179
167181
167183
167185
167187
167189
167191
167193
167195
THERM+ H-V
Assembly options
T13
– T13 = Infill thickness (IT).
No.
Art.-Nr.
No.
167167
167167–to167195
167195
No.
Art.-Nr.
012097
012103
ZHV-0004
2016
479
THERM+ H-V
Accessories
Timber curtain wall 50/56/76 mm
Connection profiles
Selection of assembly angles for integration outer frame FRAME+ 75 WB
■ Technical information
Gap dimensions x and y
– For the positioning of assembly
angles see Processing.
System
width
mm
– T13 = Infill thickness.
– T141 = Selection of assembly angle
and screws see table.
Dim. x
Dim. y
No. 207666
Dim. x
No. 207667
50
9
5
14
10
50
8
4
13
7
60
76
–
–
11
5
80
y
Assembly angle and screws
75 WB for THERM+ V
480
22 mm
–
25 mm
25 mm
28 mm
28 mm
28 mm
30 mm
30 mm
32 mm
32 mm
–
35 mm
35 mm
38 mm
38 mm
38 mm
40 mm
40 mm
42 mm
42 mm
2016
012105
–
012107
012107
012108
012108
012108
012109
012109
012110
012110
–
012111
012111
012112
012112
012112
012113
012113
012114
012114
Assembly
angle for
50 mm
167606
–
167608
167609
167610
167611
167612
167613
167614
167615
167616
–
167618
167619
167620
167621
167622
167623
167624
167625
167626
Assembly
angle for
56 mm
167656
–
167658
167659
167660
167661
167662
167663
167664
167665
167666
–
167668
167669
167670
167671
167672
167673
167674
167675
167676
Assembly
angle for
76 mm
in-house production
Screw
Length / No.
Profile
width
mm
56
x
Infill
thickness
mm
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
Dim. y
KHV-0009
EPDM
compensation
gasket
without without
–
–
2 mm 227010
3 mm 227032
4 mm 227015
5 mm 227032
6 mm 227020
7 mm 227032
8 mm 227025
9 mm 227032
10 mm 227030
–
–
2 mm 227010
3 mm 227032
4 mm 227015
5 mm 227032
6 mm 227020
7 mm 227032
8 mm 227025
9 mm 227032
10 mm 227030
Synthetic
compensation
profile
without without
–
–
without without
without without
without without
without without
without without
without without
without without
without without
without without
–
–
10 mm 227006
10 mm 227006
10 mm 227006
10 mm 227006
10 mm 227006
10 mm 227006
10 mm 227006
10 mm 227006
10 mm 227006
THERM+ H-V
Accessories
Timber curtain wall 50/56 mm
Connection profiles
Selection of assembly angles for integration outer frame FRAME+ 75 WB
■ Technical information
Gap dimensions x and y
– For the positioning of assembly
angles see Processing.
– T13 = Infill thickness.
– T141 = Selection of assembly angle
and screws see table.
System
width
mm
Dim. x
50
9
5
50
56
8
4
60
Dim. y
No. 207670
Profile
width
mm
x
THERM+ H-V
Assembly options
y
Assembly angle and screws
75 WB for THERM+ V
Infill
thickness
mm
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
Screw
Length / No.
35 mm
–
35 mm
38 mm
38 mm
40 mm
40 mm
42 mm
42 mm
42 mm
45 mm
–
45 mm
48 mm
48 mm
50 mm
50 mm
52 mm
52 mm
52 mm
52 mm
012111
–
012111
012112
012112
012113
012113
012114
012114
012114
012115
–
012115
012116
012116
012117
012117
012118
012118
012118
012118
Assembly
angle for
50 mm
167618
–
167620
167621
167622
167623
167624
167625
167626
167627
167628
–
167630
167631
167632
167633
167634
167635
167636
167637
167638
Assembly
angle for
56 mm
167668
–
167670
167671
167672
167673
167674
167675
167676
167677
167678
–
167680
167681
167682
167683
167684
167685
167686
167687
167688
EPDM
compensation
gasket
without without
–
–
2 mm 227010
3 mm 227032
4 mm 227015
5 mm 227032
6 mm 227020
7 mm 227032
8 mm 227025
9 mm 227032
10 mm 227030
–
–
2 mm 227010
3 mm 227032
4 mm 227015
5 mm 227032
6 mm 227020
7 mm 227032
8 mm 227025
9 mm 227032
10 mm 227030
KHV-0012
Synthetic
compensation
profile
without without
–
–
without without
without without
without without
without without
without without
without without
without without
without without
without without
–
–
10 mm 227006
10 mm 227006
10 mm 227006
10 mm 227006
10 mm 227006
10 mm 227006
10 mm 227006
10 mm 227006
10 mm 227006
2016
481
THERM+ H-V
Accessories
Timber curtain wall 50/56 mm
Suction disc
Mullion section with silicone joint
■ Technical information
– Only insulated glass with UV resistance edge
seal or optional with enameling/screen printing
may be used.
– The necessary infill thicknesses have to be
coordinated with the glass supplier.
– The legal glazing instructions have to be
taken into consideration and if necessary an
approval in individual cases has to be obtained.
– The suction discs can be also used as a
mechanical saving in combination with
the SG2 system for all heights larger than
8 m (min. infill thickness 32 mm).
– From an infill thickness of 23 mm possible
with insulating blocks SG.
– Selection of screws see screw selection tables.
20 to
- 64 mm
– Please consider DIN EN 18008, TRLV and
TRPV.
Suction disc set 75
No. 163807
482
2016
Suction disc set 56/90
No. 163812
Suction disc set 50/90
No. 163810
HV-0172
THERM+ H-V
Accessories
Timber curtain wall 50/56/76 mm
Belay sheet
Protection of vertical cover profile to prevent slipping
■ Technical information
THERM+ H-V
Assembly options
– Rotate drilling jig for pre-drilling the belay sheet
180° for pre-drilling the belay sheet.
No.
Art.-Nr.
127100
127100
No.
Art.-Nr.
902511
902511
ZH-0020
2016
483
THERM+ H-V
Accessories
Timber curtain wall 50/56/76 mm
Static table
Vertical glazing
Pre-dimensioning list:
– The shown list is only for pre-dimensioning of
necessary cross sections for mullion and
transom within the glass construction. This is
no compensation for necessary tension and
stabilty certification.
– Please account for the factors by using
other E-modules for the mullion material:
–Timber-E-Module 5500:
Conversion factor E-Module 2
Timber-E-Module 12000:
Conversion factor E-Module 0.92
Timber-E-Module 13000:
Conversion factor E-Module 0.85
Timber-E-Modul 14000:
Conversion factor E-Module 0.79
– The following parameters are used for
determinate the list:
wind load referred to DIN EN 1991-1-4:
0 m to 8 m
assembly height 0.5 KN/m²
> 8 m to 20 m
assembly height 0.8 KN/m²
(conversion factor 1.6)
> 20 m to 100 m
assembly height 1.1 KN/m²
(conversion factor 2.2)
Pressure cp: 0.8
Load increasing for singular items: 25 %
max. deflection referred to. DIN EN 13830:
- I/200, when L ≤ 3000 mm
- L/300 + 5 mm, when 3000 mm < L < 7500 mm
– The listed parameters are based on 1-fieldbearing. For 2-fields-bearing the deflections
and the necessary torque of inertia will be
reduced by a factor of 0.42. For 2-fieldsbearing a tension certification is mandatory.
Possible deviating max. deflections of the
glass manufacturer’s technical specifications
have to be respected. Balustrade loads are
not taken into consideration.
– T133 = 1-field-bearing
– T134 = 2-fields-bearing
Result Ix [cm4] at assembly height 0 m to 8 m,
E-Module 11000 N/mm² (BS 11/BS 14 glued-laminated timber)
Influencing parameter e [m]
0.50 0.75 1.00 1.25 1.50 1.75 2.00 2.25 2.50 2.75 3.00
Lenght of mullion L [m] / length of transom B [m]
■ Technical information
6.00 1534 2301 3068 3835 4602 5369 6136 6903 7670 8438 9205
5.90 1454 2181 2907 3634 4361 5088 5815 6542 7269 7996 8722
5.80 1376 2064 2752 3441 4129 4817 5505 6193 6881 7569 8257
5.70 1302 1952 2603 3254 3905 4556 5206 5857 6508 7159 7810
5.60 1230 1845 2459 3074 3689 4304 4919 5534 6149 6763 7378
5.50 1161 1741 2321 2901 3482 4062 4642 5222 5803 6383 6963
5.40 1094 1641 2188 2735 3282 3829 4376 4923 5470 6017 6564
5.30 1030 1545 2060 2575 3090 3606 4121 4636 5151 5666 6181
5.20
969 1453 1938 2422 2906 3391 3875 4360 4844 5329 5813
5.10
910 1365 1820 2275 2730 3185 3640 4095 4550 5005 5460
5.00
854 1280 1707 2134 2561 2988 3415 3841 4268 4695 5122
4.90
800 1200 1599 1999 2399 2799 3199 3599 3998 4398 4798
4.80
748
4.70
699 1048 1397 1747 2096 2446 2795 3144 3494 3843 4192
4.60
652
977 1303 1629 1955 2281 2607 2932 3258 3584 3910
4.50
607
910 1213 1517 1820 2124 2427 2730 3034 3337 3640
4.40
564
846
4.30
523
785 1047 1308 1570 1832 2093 2355 2617 2878 3140
4.20
485
727
969 1212 1454 1696 1939 2181 2423 2666 2908
4.10
448
672
896
4.00
413
620
826 1033 1240 1446 1653 1860 2066 2273 2479
3.90
380
571
761
951
3.80
349
524
699
873 1048 1222 1397 1572 1746 1921 2096
3.70
320
480
640
800
960
3.60
292
439
585
731
877 1023 1170 1316 1462 1608 1754
3.50
266
400
533
666
799
933 1066 1199 1332 1465 1599
3.40
242
363
484
605
726
847
968 1090 1211 1332 1453
3.30
219
329
439
548
658
768
877
987 1097 1206 1316
3.20
198
297
396
495
594
693
792
891
990 1089 1188
3.10
178
267
356
446
535
624
713
802
891
980 1069
3.00
160
240
320
400
479
559
639
719
799
879
959
2.75
123
185
246
308
369
431
492
554
615
677
739
2.50 92.5
139
185
231
277
324
370
416
462
509
555
2.25 67.4
101
135
169
202
236
270
303
337
371
404
2.00 47.3 71.0 94.7
118
142
166
189
213
237
260
284
1.75 31.7 47.6 63.4 79.3 95.2
111
127
143
159
174
190
1.50 20.0 30.0 40.0 49.9 59.9 69.9 79.9 89.9 99.9
110
120
1122 1496 1870 2244 2618 2992 3366 3740 4114 4488
1128 1410 1692 1974 2256 2538 2820 3102 3384
1120 1344 1568 1792 2016 2240 2464 2688
1141 1331 1521 1712 1902 2092 2282
1120 1280 1440 1600 1760 1920
1.25
11.6
17.3 23.1 28.9 34.7 40.5 46.2 52.0 57.8 63.6 69.4
1.00
5.9
8.9
11.8
14.8 17.8 20.7 23.7 26.6 29.6 32.6 35.5
Caluclation example:
Influencing parameter B:
Height of mullion L:
1.25 m
2.5 m
Solution for assembly heights 0 m to 8 m:
Ix mullion = 231 cm4 (see list)
Solution for assembly heights > 8 m to 20 m (conversion factor 1.6)
Ix mullion = 231 cm4 x 1.6 = 370 cm4
Solution for assembly heights > 20 m to 100 m and timber with E-Module 13000:
(Factor wind 2.2 and factor E-module 0.85)
Ix mullion = 231 cm4 x 2.2 x 0.85 = 432 cm4
484
2016
KH-0601
THERM+ H-V
Accessories
Timber curtain wall 50/56/76 mm
Static table
Statical and technical parameters
■ Technical information
– Caluclation example:
Determined necessary statical parameter
lx = 231cm4.
– Used timber profile: 50 x 90 or 60 x 80 mm.
List 1: Statical parameters lx
Mullion width (mm)
Mullion depth (mm)
50
60
70
80
90
100
50
52.08
62.50
72.92
83.33
93.75
104.17
60
90.00
108.00
126.00
144.00
162.00
180.00
70
142.92
171.50
200.08
228.67
257.25
285.83
80
213.33
256.00
298.67
341.33
384.00
426.67
90
303.75
364.50
425.25
486.00
546.75
607.50
100
416.67
500.00
583.33
666.67
750.00
833.33
120
720.00
864.00
1008.00
1152.00
1296.00
1440.00
140
1143.33
1372.00
1600.67
1829.33
2058.00
2286.67
160
1706.67
2048.00
2389.33
2730.67
3072.00
3413.33
180
2430.00
2916.00
3402.00
3888.00
4374.00
4860.00
200
3333.33
4000.00
4666.67
5333.33
6000.00
6666.67
220
4436.67
5324.00
6211.33
7098.67
7986.00
8873.33
240
5760.00
6912.00
8064.00
9216.00
10368.00 11520.00
260
7323.33
8788.00
10252.67 11717.33 13182.00 14646.67
280
9146.67
10976.00 12805.33 14634.67 16464.00 18293.33
300
11250.00 13500.00 15750.00 18000.00 20250.00
THERM+ H-V
Assembly options
result Ix [cm4]
List 2: Statical parameters ly
Mullion width (mm)
Mullion depth (mm)
50
60
70
80
90
100
50
52.08
90.00
142.92
213.33
303.75
416.67
60
62.50
108.00
171.50
256.00
364.50
500.00
70
72.92
126.00
200.08
298.67
425.25
583.33
80
83.33
144.00
228.67
341.33
486.00
666.67
90
93.75
162.00
257.25
384.00
546.75
750.00
100
104.17
180.00
285.83
426.67
607.50
833.33
120
125.00
216.00
343.00
512.00
729.00
1000.00
140
145.83
252.00
400.17
597.33
850.50
1166.67
160
166.67
288.00
457.33
682.67
972.00
1333.33
180
187.50
324.00
514.50
768.00
1093.50
1500.00
200
208.33
360.00
571.67
853.33
1215.00
1666.67
220
229.17
396.00
628.83
938.67
1336.50
1833.33
240
250.00
432.00
686.00
1024.00
1458.00
2000.00
260
270.83
468.00
743.17
1109.33
1579.50
2166.67
280
291.67
504.00
800.33
1194.67
1701.00
2333.33
300
312.50
540.00
857.50
1280.00
1822.50
2500.00
result Iy [cm4]
2016
485
486
2016
Content
Integration elements
489
490
491
THERM+ 50 H-V with WING 50 SK
THERM+ 50 H-V with WING 50 A
THERM+ 50 H-V with FRAME+ 75 DI
492
493
494
THERM+ H-I/H-V
Integration elements
THERM+ 50 H-I with FRAME+ 75 WB
THERM+ 50 H-I with FRAME+ 75 WA
THERM+ 50 H-I with FRAME+ 90 WB-T
2016
487
488
2016
THERM+ H-V
Integration elements 50/56/76 mm
Timber curtain wall
+ 50 H-I with FRAME+
+ 75 WB with frame 26/50/21
THERM+
Mullion section hinge side - turn-tilt sash
■ Technical information
■ Profiles
– Dimensions and article numbers may vary
in the different system widths 56 and 76 mm.
Article
Integration outer frame
26/50/21
Casement sash profile
51/35
Driving rod 20
No.
PU
207666
6m
214902
6m
225530
6m
■ Gaskets
Article
No.
PU
Exterior glazing gasket
220300
100 m
Interior gasket 11
220324
75 m
Interior stop gasket 7
220337
200 m
Insulating block medial
gasket
220611
50 m
Compensation gasket 2
227010
100 m
No.
PU
167606
10 pc(s)
Article
Assembly angle piece
50/6
THERM+ H-I/H-V
Integration elements
■ Accessories
220324
HI-0533
2016
489
THERM+ H-V
Integration elements 50/56/76 mm
Timber curtain wall
+ 50 H-I with FRAME+
+ 75 WA with frame 42/17
THERM+
Transom section head end - top-hung sash
■ Technical information
■ Profiles
– Dimensions and article numbers may vary
in the different system widths 56 and 76 mm.
Article
No.
PU
Integration outer frame
42/17
217010
6m
Sash profile 45/92.5
217015
6m
Glazing bead 22/47
218447
6m
Driving rod 20
225530
6m
■ Gaskets
Article
No.
PU
Rope 4
220075
100
pc(s)
Stop gasket
220214
200 m
Glazing gasket 5 to 6 F
220405
100 m
Exterior glazing gasket 4.5
220550
100 m
Exterior noise protection
gasket
220552
100 m
Sealing frame vulcanised
220615.R
Sealing frame vulcanised 220615.RT
Compensation gasket 2
490
2016
HI-0534
227010
100 m
THERM+ H-V
Integration elements 50/56/76 mm
Timber curtain wall
+ 50 H-I with FRAME+
+ 90 WB-T with frame 27/67
THERM+
Transom section base point - turn-tilt sash
■ Technical information
■ Profiles
– Dimensions and article numbers may vary
in the different system widths 56 and 76 mm.
Article
No.
PU
Integr. outer frame 27/67
215380
6m
Sash profile 68/32.5
215385
6m
Glazing bead external
218250
6m
Driving rod 20
225530
6m
■ Gaskets
Article
Exterior glazing gasket
Corner vulcanisation
for medial gasket
Corner vulcanisation
for medial gasket
Stop gasket 10.5
No.
PU
220650
100 m
220660.R
1 pc(s)
220660.RT 1 pc(s)
220670
200 m
Interior gasket 9
220686
50 m
Compensation gasket 4
227015
100 m
■ Accessories
No.
PU
Glass carrier
225025
100 pc(s)
Insulation insertion 16/47
227951
50 m
Insul. insertion 20.5/41.5
Pan head wood screw
3.5x10
Pan head wood screw
3.5x20
227966
50 m
907551
100 pc(s)
907552
100 pc(s)
THERM+ H-I/H-V
Integration elements
Article
HI-0535
2016
491
THERM+ H-V
Integration elements 50/56/76 mm
Timber curtain wall
+ 50 H-V with WING 50 SK with stepped edge glazing
THERM+
Transom section base point - top hung sash
■ Technical information
■ Profiles
– Dimensions and article numbers may vary
in the different system widths 56 and 76 mm.
Article
No.
PU
Interior sash profile
12/55
204000
6m
Exterior sash profile
204110
6m
Outer frame 35/72
205000
6m
Frame profile
218040
6m
Glazing profile 6
218082
6m
Article
No.
PU
Rope 3
220065
200 m
Interior glazing gasket
5 to 6
220110
100 m
Cover gasket
220190
100 m
Stop gasket
220214
200 m
220226.R
1 pc(s)
■ Gaskets
Corner vulcanised
medial gasket
Corner vulcanised
medial gasket
220226.RT 1 pc(s)
■ Accessories
Article
Driving rod 20
Special flat fillister head
screw 4.8x19
Special countersunk
sheet metal screw
3.9x13
492
2016
HV-0533
No.
PU
225505
6m
230070
100
pc(s)
230075
100
pc(s)
THERM+ H-V
Integration elements 50/56/76 mm
Timber curtain wall
+ 50 H-V with WING 50 A as bottom-hung sash
THERM+
Transom section base point with hinge - bottom-hung sash
■ Technical information
■ Profiles
– Dimensions and article numbers may vary
in the different system widths 56 and 76 mm.
Article
No.
PU
Interior sash profile 12/55
204000
6m
Exterior sash profile
204100
6m
Outer frame 45/82/6
205100
6m
Frame profile 18
218041
6m
■ Gaskets
Article
No.
PU
Rope 3
220065
200 m
Interior glazing gasket
5 to 6
220110
100 m
Cover gasket
220190
100 m
Gasket for pressure
profile 2/16
220205
100 m
Stop gasket
220214
200 m
220226.R
1 pc(s)
Corner vulcanised
medial gasket
Corner vulcanised
medial gasket
220226.RT 1 pc(s)
■ Accessories
No.
PU
Driving rod 20
225505
6m
Special flat fillister head
screw 4.8x19
230070
100
pc(s)
THERM+ H-I/H-V
Integration elements
Article
HV-0534
2016
493
THERM+ H-V
Integration elements 50/56/76 mm
Timber curtain wall
+ 50 H-V with FRAME+
+ 75 DI with frame 44/65/21 Basic Style
THERM+
Mullion section hinge side - door
■ Technical information
■ Profiles
– Dimensions and article numbers may vary
in the different system widths 56 and 76 mm.
Article
No.
PU
Glazing bead 22/47
218447
6m
Integration outer frame
44/65/21
314002
6m
Sash profile 84/71
314100
6.5 m
■ Gaskets
Article
No.
PU
Rope 4
220075
100
pc(s)
Glazing gasket 5 to 6 F
220405
100 m
Exterior glazing gasket 4.5
220550
100 m
Compensation gasket 2
227010
100 m
Kederdichtung
320002
200 m
Stop gasket 7
320100
200 m
No.
PU
167608
10 pc(s)
■ Accessories
Article
Assembly angle piece
50/8
494
2016
HV-0535
Content
Thermal insulation
497
508
521
THERM+ H-I/H-V
Thermal insulation
Basic information on curtain wall systems
Uf-values THERM+ H-I
Uf-values THERM+ H-V
2016
495
496
2016
THERM+ H-I/H-V
Thermal insulation
Determination of the Ucw-value
Different possibilities
Used symbols and indices
Abbreviations:
Ag, A p
Af, At, Am
U g, U p
Uf, Ut, Um
Ψf,g, Ψm,g, Ψt,g, Ψp
Ψm,f, Ψt,f
Surface ratios of the fillings
Surface ratios of the profiles
Thermal transmission coefficient of the fillings
Thermal transmission coefficient of the frame, the transom and the mullion
Length-related thermal transmission coefficient due to combined
thermal effects between glazing, panel, and frame to mullion/transom.
Length-related thermal transmission coefficient due to combined
thermal effects between frame to mullion/transom.
More used symbols:
A
b
B
U
I
ε
λ
Ψ
Surface
Width of the thermal separation zone in a profile
Facing width of a profile
Thermal transmission coefficient (U value)
Length of the linear thermal bridge
Emission ratio
Thermal conductivity
Linear thermal transmission coefficient
Used indices:
cw
f
g
m
p
t
w
curtain wall
frame
glasss
mullion
panel
transom
window
m2
mm
mm
W/m2K
m
W/mK
W/mK
Determination of the Ucw-value according to DIN EN ISO 12631: 2012
For calculating the UCW-value for curtain walls the standard DIN EN ISO 12631: 2012 offers three different procedures:
1. Determination of the UCW-value by means of the surface-related thermal transmission coefficient of joints UTJ
2. Determination of the UCW-value by means of the length-related thermal transmission coefficient of joints ΨTJ
3. Determination of the UCW-value by evaluating the individual components
In the following, the third procedure ‘Determination of the UCW-value by evaluating the individual components’ will be described and explained. Whatever information the customer needs for calculating UCW-values on his or her own will be provided here.
Determination of the Ucw-value by evaluating the individual components
This prodecure applies to curtain walls, such as element façades, stick systems (mullion/transom), and dry glazing. Do not use it for
structural glazing with silicone adhesion, rear-ventilated façades, nor SG glazing. For calculating the UCW-value a representative element of the overall façade is selected and its value calculated.
Not only the U values of the individual components but also the edge bond of insulation glass and façade panels acting as a thermal
bridge have to be considered along with the Ψ-value.
The thermal transmission coefficient of a single element of the curtain wall UCW is calculated according to the following formula:
ΣAgUg + ΣApUp + ΣAmUm + ΣAtUt + ΣAfUf+ Σlf,gΨf,g + Σlm,gΨm,g + Σlt,gΨt,g + ΣlpΨp + Σlm,f Ψm,f + Σlt,f Ψt,f
Acw
Determination of the total surface of the façade: Acw = Ag + Ap + Af + Am + At
If a façade consists of different elements, an average value of the thermal transmission coefficient regarding the various surfaces must
be calculated. This is done with the help of the following formula:
Ucw, tot =
Σ(Ucw, j Acw, j)
ΣAcw, j
Σ(Ucw, j Acw, j) = Sum of the products of the thermal transmission coefficients and the respective
surfaces of the various modules.
ΣAcw, j
= Sum of the surfaces of the various elements.
2016
497
THERM+ H-I/H-V
Thermal insulation
Ucw =
THERM+ H-I/H-V
Thermal insulation
Definition of the surfaces
Glazed surfaces
The glazed surface Ag or the surface of a panel Ap of a component respectively, is the smallest of the surfaces visible from both sides
(see illustrations below). The overlapping of panel or glazing because of the sealings can be neglected.
Visible total length of the perimeter of the glazing/the panel
The total perimeter length of glazing lg or of panel lp is the sum of the glazing’s, or panel’s, visible perimeters. In case of varying visible
perimeters, it is defined by the cutting site of the glass pane and the frame (see illustration above).
Surface ratios of frame, mullion, and transom
The division of the surface ratios must be done according to the illustration below:
assembly
498
2016
THERM+ H-I/H-V
Thermal insulation
Division of the surface of a curtain wall
section 1 to 1
Af
Am
Af
window
section 2 to 2
Panel
Af
At
fixed
glazing
section 3 to 3
section 4 to 4
section 6 to 6
Am
At
At
THERM+ H-I/H-V
Thermal insulation
section 5 to 5
Am
Af
2016
499
THERM+ H-I/H-V
Thermal insulation
Representative elements
In order to calculate the UCW-value of a curtain wall it is necessary to select a representative element. It is important that the chosen
element mirrors the surface ratios with various thermal qualities of the overall façade, such as glazings, window parapets and so on,
and how they are attached (by mullion and transom, silicon joint, etc.).
Said element is limited by section planes which must be within an adiabatic range. These may either be
– symmetry planes
or
– planes where the heat flow runs at a right angle to the plane of the curtain wall, i. e. there are no influences from the edge
(for example, having a distance of at least 190 mm to the edge of a window with double glazing).
The illustration below shows the adiabatic lines (in the center of the glass pane, or panel, at a sufficient distance to the frame).
Section planes are permissible here because the heat flow runs at a right angle to the glass panes.
Notice: The section planes must not necessarily be geometrical limits of the elements (such as the frame) to due to the fact that the
center of a frame often is not necessarily an adiabatic limit. This circumstance might be caused by the asymmetrical geometrical
form of the frame, asymmetrical qualities of the material (such as components with differing heat conductivity on both sides of
the frame), or the asymmetrical attachment of the panels in a symmetrical frame.
500
2016
THERM+ H-I/H-V
Thermal insulation
Calculation of th Ψg-value
Ψg value of glazings
Length-related thermal transmission coefficient Ψm,g, Ψt,g and Ψf,g in W/(mK)
Type of
mullion/transom/window frame
Double or triple insulation glazing,
uncoated glass, air or gas interspace
Double or triple insulation glazing
with low emission value, air or gas
interspace.
- Single coating with double glazing
- Double coating with triple glazing
Chart B.1
Appendix B DIN EN ISO 12631
Distance pieces made of aluminium and steel in mullion or transom profiles Ψm,g, Ψt,g
Timber to Aluminium
Metal frames with
thermal separation
Chart B.2
Appendix B DIN EN ISO 12631
0.08
0.11
di 100 mm: 0.13
di 200 mm: 0.15
di 100 mm: 0.17
di 200 mm: 0.19
Thermally improved distance pieces in mullion profiles or transom profiles Ψm,g, Ψt,g
(See Chapter 2.1.2 on a definition of thermally improved distance pieces.)
Timber to Aluminium
Metal frames with
thermal separation
Chart B.3
Appendix B DIN EN ISO 12631
0.06
0.08
di 100 mm: 0.09
di 200 mm: 0.10
di 100 mm: 0.11
di 200 mm: 0.12
Distance pieces made of aluminium or steel Ψf,g in window elements
(also insert elements in façades)
Timber and synthetics
0.06
0.08
Metal frames with
thermal separation
0.08
0.11
Metal frames without
thermal separation
0.02
0.05
Chart B.4
Appendix B DIN EN ISO 12631
Thermally improved distance pieces Ψf,g in window elements
(also insert elements in façades)
Timber and synthetics
0.05
0.06
Metal frames with
thermal separation
0.06
0.08
Metal frames without
thermal separation
0.01
0.04
THERM+ H-I/H-V
Thermal insulation
(di = room-sided depth of the mullion/transom)
2016
501
THERM+ H-I/H-V
Thermal insulation
Determination of the Ψg-value
Determination for curtain walls with double or triple insulation glazing
Since the data sheets issued by the German association Bundesverband Flachglas apply to window systems and not to curtain wall
systems, the Ψg-values for curtain walls have to be calculated.
The basis for this is the ift guideline WA-13/1 “Ψ-values for curtain
walls”. In the glazing, a distinction is made between double and
triple insulation glazing.
Outside
Inside
Interspace between glass panes
The representative structure of a
Spacer
– Double insulation glazing is 6/16/6 with Ug = 1.1 W/(m K).
2
Secondary seal
– Triple insulation glazing is 6/14/4/14/6 with Ug = 0.7 W/(m2K).
The transmissions on other glass structures are possible, as
shown in the two illustrations. The Ψ-values can be transmitted on
– Double insulation glazings with Ug ≥ 1.0 W/(m2K).
– Triple insulation glazings with Ug ≥ 0.5 W/(m2K).
Double insulation glazing
Outside
Inside
Interspace between
glass panes
Spacer
Secondary seal
Triple insulation glazing
502
2016
THERM+ H-I/H-V
Thermal insulation
Determination of the Ψ-value
Ψ-values double insulation glazing THERM+ Timber H-I/H-V
Ψg-values in W/(m2K)
THERM+ H-I
without
insulating block
THERM+ H-I
with insulating
block P
THERM+ H-V
without
insulating block
THERM+ H-V
with insulating
block P
ACS plus
0.039
0.042
0.038
0.042
Swisspacer Ultimate
0.039
0.042
0.038
0.042
Swisspacer V
0.043
0.046
0.041
0.045
Super Spacer TriSeal
0.045
0.048
0.043
0.047
Ködispace
0.047
0.050
0.045
0.050
Nirotec EVO
0.050
0.054
0.048
0.053
Chromatech Ultra F
0.051
0.055
0.049
0.054
TGI-Spacer
0.053
0.056
0.050
0.056
TGI-Spacer M
0.053
0.057
0.051
0.057
THERMIX TX.N
0.054
0.058
0.052
0.058
GTS
0.065
0.069
0.063
0.069
Nirotec 15
0.067
0.071
0.064
0.070
Swisspacer
0.066
0.071
0.064
0.071
Chromatech Plus
0.068
0.072
0.065
0.072
Nirotec 17
0.069
0.074
0.067
0.073
Chromatech
0.072
0.077
0.069
0.076
WEP classic
0.072
0.077
0.069
0.076
Aluminium
0.103
0.108
0.100
0.108
THERM+ H-I/H-V
Thermal insulation
System
2016
503
THERM+ H-I/H-V
Thermal insulation
Determination of the Ψ-value
Ψ-values triple insulation glazing THERM+ Timber H-I/H-V
Ψg-values in W/(m2K)
THERM+ H-I
without
insulating block
System
THERM+ H-I
with insulating
block P
THERM+ H-V
without
insulating block
THERM+ H-V
with insulating
block P
THERM+ H-V
with insulating
block PH
ACS plus
0.031
0.034
0.030
0.033
0.032
Swisspacer Ultimate
0.031
0.034
0.030
0.034
0.032
Swisspacer V
0.034
0.037
0.033
0.037
0.036
Super Spacer TriSeal
0.036
0.039
0.035
0.039
0.037
Ködispace
0.038
0.042
0.037
0.041
0.040
Nirotec EVO
0.041
0.045
0.040
0.045
0.043
Chromatech Ultra F
0.042
0.046
0.041
0.046
0.044
TGI-Spacer
0.044
0.047
0.042
0.047
0.046
TGI-Spacer M
0.044
0.048
0.043
0.048
0.046
THERMIX TX.N
0.045
0.049
0.044
0.049
0.047
Swisspacer
0.055
0.060
0.054
0.060
0.058
GTS
0.057
0.062
0.055
0.061
0.059
Nirotec 15
0.058
0.063
0.056
0.063
0.060
Chromatech Plus
0.060
0.065
0.058
0.064
0.062
Nirotec 17
0.061
0.066
0.059
0.066
0.063
Chromatech
0.065
0.070
0.063
0.069
0.067
WEP classic
0.065
0.070
0.063
0.069
0.067
Aluminium
0.105
0.111
0.102
0.110
0.103
504
2016
THERM+ H-I/H-V
Thermal insulation
Ψp-value of panels
Length-related thermal transmission coefficient Ψp according to DIN EN ISO 12631
Heat conductivity of distance
piece λW/(mK)
Length-related thermal
transmission coefficient Ψp W/(mK)
–
0.13
Aluminium/Aluminium
0.2
0.4
0.20
0.29
Aluminium/Glass
0.2
0.4
0.18
0.20
Steel/Glass
0.2
0.4
0.14
0.18
Type of filling
Aluminium/Aluminium
Panel type 1
with cladding
Aluminium/Glass
Steel/Glass
Panel type 2
with cladding
The Ψp-values may be used if no other values from measuring or detailed calculations are available.
Panel type 1
1
Panel type 2
3
1
2
4
2
6
5
5
Abbreviations: 1 Aluminium 2.5 mm/Steel 2.0 mm
3
4
Abbreviations: 1 Aluminium 2.5 mm/Steel 2.0 mm
2 Insulating material λ =
0.025 W/(mK) to 0.04 W/(mK)
2 Insulating material λ =
0.025 W/(mK) to 0.04 W/(mK)
3 Air filled interspace 0 to 20 mm
3 Aluminium 2.5 mm/Glass 6 mm
4 Aluminium 2.5 mm/Glass 6 mm
4 Distance piece λ = 0.2 W/(mK) to 0.4 W/(mK)
5 Distance piece λ = 0.2 W/(mK) to 0.4 W/(mK)
5 Aluminium
THERM+ H-I/H-V
Thermal insulation
6 Aluminium
2016
505
THERM+ H-I/H-V
Thermal insulation
Ψp-value of insert elements
The Ψ-value between mullion/transom and clamping frame (Ψm/t,f-value) can be calculated according to DIN EN ISO 10077-2 or read
from Chart B.6 DIN EN ISO 12631 if no measuring results are available.
Length related thermal transmission coefficient Ψm,f and Ψt,f in W/(mK)
Illustration
506
2016
Type of
attachment
Description
Length-related thermal
transmission coefficient
Ψm,f or Ψt,f
W/(mK)
A
Mounting of the frame
in the mullion/transom,
with additional aluminium
profile with thermotechnical
separation zone
0.11
B
Mounting of the frame
in the mullion/transom,
with plastic adapter profile,
e. g. polyamide plastic 6.6
with a glass fibre content
of 25% (λ ≤ 0.3 W/(mK))
0.05
C1
Mounting of the frame
in the mullion/transom,
with extended thermal
separation of the frame
0.07
C2
Mounting of the frame
in the mullion/transom,
with extended thermal
separation of the frame,
e. g. polyamide plastic 6.6
with a glass fibre content
of 25% (λ ≤ 0.3 W/(mK))
0.07
D
Mounting of the frame
in the mullion/transom,
with extended exterior
aluminium profile and
filling material of low heat
conductivity
(λ ≤ 0.3 W/(mK))
0.07
THERM+ H-I/H-V
Thermal insulation
Determination of the U-value in general
Up-values of panels
The Up-values of panels are available from the panel manufacturer.
Uf values for RAICO window systems
For the values of all FRAME+ aluminium window systems, please see chapter Thermal insulation in our catalogues FRAME+
aluminium window systems.
Uf-values for RAICO door systems
The Uf-values of RAICO door systems 75 DI are shown in chapter Thermal insulation in our catalogues FRAME+ aluminium door systems.
Uf-values for RAICO curtain wall systems
For the Uf-values of RAICO curtain wall systems, please refer to the catalogues THERM+, chapter Thermal insulation.
Influence of screws
Calculating the U-values of mullions and transoms of a stick-system façade (Um/Ut) according to DIN EN ISO 10077-2,
the influence of screws acting as an additional thermal bridge is not considered.
Therefore, that influence’s value must be added as well: Um/t = U0 + ΔU
Abbreviations:
Um/t
Thermal transmission coefficient mullion/transom considering the influence of the screws
U0
Thermal transmission coefficient mullion/transom without the influence of the screws
ΔU
Thermal transmission coefficient of the screws
ΔU can be determined by means of the following procedures:
– Calculation according to DIN EN ISO 10211
– Calculation according to DIN EN ISO 12631, Appendix C
– Measuring according to DIN EN 12412-2
– Reading from Chart 2 DIN EN ISO 12631
Chart 2 in DIN EN ISO 12631:
Screw diameter
(made of stainless steel)
Distance between screws
(made of stainless steel)
ΔU value
≤ 6 mm
200 mm to 300 mm
0.3
THERM+ H-I/H-V
Thermal insulation
Important! Regarding the Uf-values of mullions and transoms illustrated in the catalogues THERM+, the influence of the
screws as determined by the ift Rosenheim has been considered.
2016
507
THERM+ H-I/H-V
Thermal insulation
THERM+ H-I 50/56/76/96 mm
Uf-values pressure profile uncoated and cover profile
Mullion section/transom section
■ Technical information
– Uf-value in W/(m2K) acc. to DIN EN ISO 10077-2
including screw influence 0.18.
– Values also valid for all approved interior
gasket variants.
– Values valid for exterior gasket 3 mm
and all standard cover profile options.
– T13 = Infill thickness.
Uf-values mullion
Infill
thickness
mm
System width mm
50
56
76
96
24
1.68
1.57
1.52
1.53
28
1.63
1.52
1.47
1.50
32
1.58
1.49
1.43
1.47
36
1.54
1.46
1.40
1.45
40
1.51
1.43
1.38
1.43
44
1.49
1.41
1.36
1.40
48
1.47
1.39
1.34
1.38
52
1.45
1.38
1.32
1.38
56
1.43
1.36
1.30
1.37
60
1.42
1.35
1.29
1.36
64
1.40
1.34
1.28
1.36
Uf-values transom
508
2016
HI-0152
Infill
thickness
mm
System width mm
50
56
76
96
24
1.78
1.62
1.42
1.43
28
1.71
1.57
1.39
1.40
32
1.66
1.52
1.36
1.38
36
1.61
1.49
1.34
1.36
40
1.57
1.45
1.32
1.35
44
1.54
1.44
1.30
1.34
48
1.51
1.40
1.28
1.31
52
1.49
1.39
1.27
1.31
56
1.47
1.37
1.26
1.30
60
1.46
1.35
1.25
1.30
64
1.44
1.34
1.24
1.30
THERM+ H-I/H-V
Thermal insulation
THERM+ H-I 50/56/76/96 mm
Uf-values pressure profile coated
Mullion section/transom section
■ Technical information
– Uf-value in W/(m2K) acc. to DIN EN ISO 10077-2
including screw influence 0.18.
– Values also valid for all approved interior
gasket variants.
– Values valid for exterior gasket 3 mm
and all standard pressure profile options.
– T13 = Infill thickness.
Uf-values mullion
Infill
thickness
mm
System width mm
50
56
76
96
24
2.09
2.03
2.11
2.12
28
2.02
1.98
2.07
2.09
32
1.98
1.94
2.03
2.07
36
1.94
1.91
1.99
2.04
40
1.91
1.89
1.97
2.03
44
1.88
1.86
1.94
1.99
48
1.85
1.85
1.92
1.98
52
1.84
1.83
1.90
1.97
56
1.82
1.82
1.88
1.96
60
1.80
1.80
1.87
1.95
64
1.79
1.79
1.85
1.95
Uf-values transom
HI-0153
Infill
thickness
mm
System width mm
50
24
2.20
2.11
2.00
1.99
28
2.12
2.05
1.97
1.97
32
2.07
2.00
1.94
1.96
76
96
36
2.02
1.96
1.91
1.94
40
1.98
1.93
1.89
1.93
44
1.94
1.90
1.87
1.91
48
1.92
1.86
1.85
1.89
52
1.90
1.85
1.84
1.88
56
1.87
1.83
1.83
1.88
60
1.86
1.82
1.81
1.87
64
1.84
1.80
1.80
1.87
2016
509
THERM+ H-I/H-V
Thermal insulation
56
THERM+ H-I/H-V
Thermal insulation
THERM+ H-I 50/56/76 mm
Uf-values flat pressure profile coated
Mullion section/transom section
■ Technical information
– Uf-value in W/(m2K) acc. to DIN EN ISO 10077-2
including screw influence 0.18.
– Values also valid for all approved interior
gasket variants.
– Values also valid for all approved
screw connection variants.
– T13 = Infill thickness.
Uf-values mullion
Infill
thickness
mm
System width mm
50
56
76
24
2.45
2.35
2.41
28
2.32
2.24
2.31
32
2.24
2.17
2.23
36
2.18
2.11
2.18
40
2.11
2.06
2.12
44
2.07
2.02
2.10
48
2.03
2.00
2.07
52
2.00
1.97
2.04
56
1.98
1.95
2.02
60
1.96
1.93
2.00
64
1.94
1.91
1.98
Uf-values transom
510
2016
HI-0154
Infill
thickness
mm
System width mm
50
56
76
24
2.56
2.46
2.28
28
2.41
2.32
2.19
32
2.32
2.24
2.12
36
2.23
2.17
2.07
40
2.17
2.11
2.04
44
2.12
2.06
2.01
48
2.07
2.03
1.99
52
2.04
1.99
1.97
56
2.01
1.97
1.95
60
1.98
1.94
1.94
64
1.96
1.92
1.92
THERM+ H-I/H-V
Thermal insulation
THERM+ H-I 50/56/76 mm
Uf-values insulating block 9
Mullion section/transom section
■ Technical information
– Uf-value in W/(m2K) acc. to DIN EN ISO 10077-2
including screw influence 0.18.
– Values also valid for all approved interior
gasket variants.
– Values valid for exterior gasket 3 mm
and all standard pressure profile options.
– Values also valid für all standard cover and
pressure profile options with insulating block 9.
– T13 = Infill thickness.
Uf-values mullion
Infill
thickness
mm
System width mm
50
56
76
24
1.70
1.63
1.64
28
1.63
1.57
1.60
32
1.59
1.53
1.57
36
1.56
1.51
1.55
40
1.53
1.49
1.53
44
1.51
1.47
1.51
48
1.50
1.46
1.49
52
1.48
1.45
1.48
56
1.47
1.43
1.46
60
1.46
1.42
1.46
64
1.45
1.42
1.44
Uf-values transom
HI-0146
System width mm
50
56
76
24
1.74
1.67
1.58
28
1.68
1.61
1.54
32
1.63
1.58
1.52
36
1.59
1.54
1.50
40
1.56
1.52
1.48
44
1.54
1.49
1.46
48
1.52
1.48
1.45
52
1.50
1.46
1.44
56
1.48
1.45
1.43
60
1.47
1.44
1.42
64
1.46
1.42
1.42
2016
511
THERM+ H-I/H-V
Thermal insulation
Infill
thickness
mm
THERM+ H-I/H-V
Thermal insulation
THERM+ H-I 50/56/76 mm
Uf-values insulating block 21
Mullion section/transom section
■ Technical information
– Uf-value in W/(m2K) acc. to DIN EN ISO 10077-2
including screw influence 0.18.
– Assembly of insulating block 17, no. 151035
for system width 76 mm.
– Values also valid for all approved interior
gasket variants.
– Values valid for all standard cover profile options.
– T13 = Infill thickness.
Uf-values mullion
Infill
thickness
mm
System width mm
50
56
76
24
1.43
1.37
1.45
28
1.30
1.25
1.43
32
1.25
1.21
1.40
36
1.21
1.17
1.38
40
1.18
1.15
1.37
44
1.17
1.13
1.35
48
1.16
1.13
1.34
52
1.16
1.12
1.33
56
1.15
1.12
1.32
60
1.14
1.11
1.31
64
1.14
1.11
1.31
Uf-values transom
512
2016
HI-0147
Infill
thickness
mm
System width mm
50
56
76
24
1.44
1.38
1.42
28
1.31
1.26
1.39
32
1.26
1.23
1.36
36
1.22
1.19
1.34
40
1.20
1.17
1.33
44
1.18
1.15
1.32
48
1.17
1.14
1.30
52
1.16
1.13
1.30
56
1.16
1.13
1.29
60
1.15
1.12
1.29
64
1.14
1.11
1.28
THERM+ H-I/H-V
Thermal insulation
THERM+ H-I 50/56/76 mm
Uf-values insulating block 21
Mullion section/transom section
■ Technical information
– Uf-value in W/(m2K) acc. to DIN EN ISO 10077-2
including screw influence 0.18.
– Assembly of insulating block 17, no. 151035
for system width 76 mm.
– Values also valid for all approved interior
gasket variants.
– Values valid for all standard pressure profile options.
– T13 = Infill thickness.
Uf-values mullion
Infill
thickness
mm
System width mm
50
56
76
24
1.44
1.38
1.47
28
1.30
1.26
1.44
32
1.25
1.22
1.42
36
1.21
1.18
1.39
40
1.18
1.15
1.38
44
1.17
1.14
1.36
48
1.16
1.13
1.35
52
1.15
1.13
1.34
56
1.15
1.13
1.33
60
1.14
1.11
1.32
64
1.14
1.11
1.32
Uf-values transom
HI-0151
System width mm
50
56
76
24
1.45
1.39
1.43
28
1.31
1.27
1.40
32
1.27
1.24
1.38
36
1.22
1.19
1.35
40
1.20
1.17
1.34
44
1.19
1.16
1.33
48
1.18
1.15
1.31
52
1.17
1.14
1.31
56
1.16
1.13
1.30
60
1.15
1.13
1.29
64
1.14
1.12
1.29
2016
513
THERM+ H-I/H-V
Thermal insulation
Infill
thickness
mm
THERM+ H-I/H-V
Thermal insulation
THERM+ H-I 50/56/76 mm
Uf-values insulating block P
Mullion section/transom section
■ Technical information
Selection insulating block
– Uf-value in W/(m K) acc. to DIN EN ISO 10077-2
including screw influence 0.18.
– Values also valid for all coated standard pressure
profiles with visible screw connection.
– Values also valid for all approved interior
gasket variants.
– Values valid for exterior gasket 3 mm
and all standard cover profile options.
– All values passive house standard.
– T13 = Infill thickness.
2
Infill
thickness
mm
System width mm
50
56
76
No.
No.
No.
24 to 29
168509
168515
168521
30 to 43
168510
168516
168522
44 to 64
168514
168520
168522
Uf-values mullion
Infill
thickness
mm
System width mm
50
56
76
24
1.42
1.35
1.28
28
1.30
1.25
1.21
32
1.18
1.14
1.10
36
1.14
1.10
1.08
40
1.10
1.07
1.06
44
1.02
0.99
1.05
48
0.97
0.95
1.04
52
0.96
0.94
1.04
56
0.96
0.94
1.03
60
0.95
0.93
1.03
64
0.95
0.93
1.03
Uf-values transom
514
2016
HI-0148
Infill
thickness
mm
System width mm
50
56
76
24
1.43
1.36
1.26
28
1.31
1.26
1.19
32
1.19
1.15
1.08
36
1.15
1.12
1.06
40
1.11
1.09
1.04
44
1.03
1.00
1.03
48
0.98
0.96
1.02
52
0.97
0.95
1.02
56
0.97
0.95
1.01
60
0.96
0.94
1.01
64
0.96
0.94
1.01
THERM+ H-I/H-V
Thermal insulation
THERM+ H-I 50/56/76 mm
Uf-values insulating block P
Mullion section/transom section
■ Technical information
Selection insulating block
– Uf-value in W/(m K) acc. to DIN EN ISO 10077-2
including screw influence 0.18.
2
– Values also valid for all approved interior
gasket variants.
– Values also valid for all approved
screw connection variants.
– All values passive house standard.
– T13 = Infill thickness.
Infill
thickness
mm
System width mm
50
56
76
No.
No.
No.
32 to 39
168509
168515
168521
40 to 53
168510
168516
168522
54 to 64
168514
168520
168522
Uf-values mullion
Infill
thickness
mm
System width mm
50
56
76
32
1.33
1.29
1.21
36
1.22
1.18
1.14
40
1.12
1.09
1.04
44
1.07
1.04
1.01
48
1.03
1.01
1.00
52
0.93
0.91
0.99
56
0.89
0.87
0.97
60
0.88
0.86
0.97
64
0.87
0.85
0.96
Uf-values transom
HI-0149
System width mm
50
56
76
32
1.34
1.29
1.20
36
1.23
1.19
1.12
40
1.12
1.09
1.03
44
1.08
1.05
1.00
48
1.05
1.02
0.97
52
0.94
0.91
0.96
56
0.90
0.87
0.96
60
0.89
0.87
0.96
64
0.88
0.86
0.94
2016
515
THERM+ H-I/H-V
Thermal insulation
Infill
thickness
mm
THERM+ H-I/H-V
Thermal insulation
THERM+ H-I 50/56 mm
Uf-values pressure profile uncoated and cover profile, insulating block PH
Mullion section/transom section
■ Technical information
– Uf-value in W/(m2K) acc. to DIN EN ISO 10077-2
including screw influence 0.18.
– Values also valid for all approved interior
gasket variants.
– Values valid for exterior gasket 3 mm
and all standard cover profile options.
– All values passive house standard.
– T13 = Infill thickness.
Uf-values mullion
Infill
thickness
mm
System width
mm
50
56
36
1.12
1.10
40
0.99
0.98
44
0.92
0.90
48
0.85
0.85
52
0.83
0.82
56
0.81
0.81
60
0.79
0.79
64
0.78
0.78
Uf-values transom
Infill
thickness
mm
516
2016
HI-0201
System width
mm
50
56
36
1.12
1.10
40
1.02
1.00
44
0.96
0.94
48
0.91
0.90
52
0.89
0.88
56
0.87
0.86
60
0.85
0.85
64
0.84
0.84
THERM+ H-I/H-V
Thermal insulation
THERM+ H-I 50/56 mm
Uf-values insulating block P passive house
Mullion section/transom section
■ Technical information
– Uf-value in W/(m2K) acc. to DIN EN ISO 10077-2
including screw influence 0.18.
– Values also valid for all coated standard pressure profiles
with visible screw connection.
– Values also valid for all approved interior gasket variants.
– Values valid for exterior gasket 5 mm and all standard cover profile options.
- Execution with exterior gasket 5 mm, glass bite 13 mm (for 50 und 56)
and insulating block P no. 168514 (50) or 168520 (56).
– All values passive house certified.
– T13 = Infill thickness.
Uf-values mullion
Infill
thickness
mm
System width
mm
50
56
44
0.99
0.98
48
0.96
0.97
52
0.95
0.96
56
0.94
0.95
60
0.93
0.95
64
0.93
0.95
Uf-values transom
HI-0204
System width
mm
50
56
44
1.00
0.99
48
0.97
0.99
52
0.96
0.97
56
0.95
0.97
60
0.94
0.96
64
0.94
0.96
2016
517
THERM+ H-I/H-V
Thermal insulation
Infill
thickness
mm
THERM+ H-I/H-V
Thermal insulation
THERM+ H-I 76 mm
Uf-values pressure profile uncoated and cover profile, insulating block P
Mullion section/transom section
■ Technical information
– Uf-value in W/(m2K) acc. to DIN EN ISO 10077-2
including screw influence 0.18.
– Values also valid for all approved interior
gasket variants.
– Values valid for exterior gasket 5 mm
and all standard cover profile options.
– All values passive house certified.
– T13 = Infill thickness.
Uf-values mullion
Infill
thickness
mm
System width
mm
44
0.87
48
0.86
76
52
0.84
56
0.83
60
0.82
64
0.82
Uf-values transom
518
2016
HI-0150
Infill
thickness
mm
System width
mm
44
0.87
48
0.86
52
0.83
76
56
0.83
60
0.82
64
0.81
THERM+ H-I/H-V
Thermal insulation
THERM+ H-I 50/56 mm
Uf-values pressure profile coated, insulating block PH
Mullion section/transom section
■ Technical information
– Uf-value in W/(m2K) acc. to DIN EN ISO 10077-2
including screw influence 0.18.
– Values also valid for all approved interior
gasket variants.
– Values valid for exterior gasket 3 mm
and all standard pressure profile options.
– All values passive house standard.
– T13 = Infill thickness.
Uf-values mullion
Infill
thickness
mm
System width
mm
50
56
36
1.11
1.10
40
0.99
0.98
44
0.92
0.90
48
0.85
0.86
52
0.83
0.82
56
0.81
0.81
60
0.79
0.79
64
0.78
0.78
Uf-values transom
HI-0202
System width
mm
50
56
36
1.11
1.10
40
1.02
1.00
44
0.96
0.94
48
0.91
0.90
52
0.89
0.88
56
0.87
0.86
60
0.85
0.85
64
0.84
0.84
2016
519
THERM+ H-I/H-V
Thermal insulation
Infill
thickness
mm
THERM+ H-I/H-V
Thermal insulation
THERM+ H-I 50/56 mm
Uf-values flat pressure profile coated, insulating block PH
Mullion section/transom section
■ Technical information
– Uf-value in W/(m2K) acc. to DIN EN ISO 10077-2
including screw influence 0.18.
– Values also valid for all approved interior
gasket variants.
– Values also valid for all approved
screw connection variants.
– All values passive house standard.
– T13 = Infill thickness.
Uf-values mullion
Infill
thickness
mm
System width
mm
50
56
44
1.03
1.02
48
0.94
0.92
52
0.87
0.86
56
0.81
0.80
60
0.78
0.78
64
0.77
0.76
Uf-values transom
Infill
thickness
mm
520
2016
HI-0203
System width
mm
50
56
44
1.04
1.02
48
0.96
0.94
52
0.90
0.89
56
0.86
0.85
60
0.84
0.82
64
0.82
0.81
THERM+ H-I/H-V
Thermal insulation
THERM+ H-V 50/56/76 mm
Uf-values pressure profile uncoated and cover profile
Mullion section/transom section
■ Technical information
– Uf-value in W/(m2K) acc. to DIN EN ISO 10077-2
including screw influence 0.18.
– Values also valid for all approved interior
gasket variants.
– Values valid for exterior gasket 3 mm
and all standard cover profile options.
– T13 = Infill thickness.
Uf-values mullion
Infill
thickness
mm
System width mm
50
56
76
24
1.71
1.57
1.40
28
1.65
1.53
1.37
32
1.61
1.49
1.34
36
1.57
1.46
1.32
40
1.54
1.43
1.30
44
1.51
1.41
1.28
48
1.48
1.39
1.27
52
1.47
1.37
1.25
56
1.45
1.36
1.25
60
1.43
1.34
1.24
64
1.42
1.33
1.23
Uf-values transom
HV-0141
System width mm
50
56
76
24
1.65
1.51
1.33
28
1.60
1.47
1.31
32
1.57
1.44
1.29
36
1.53
1.41
1.27
40
1.51
1.39
1.26
44
1.48
1.36
1.24
48
1.46
1.35
1.24
52
1.44
1.33
1.23
56
1.43
1.32
1.22
60
1.41
1.31
1.21
64
1.40
1.30
1.20
2016
521
THERM+ H-I/H-V
Thermal insulation
Infill
thickness
mm
THERM+ H-I/H-V
Thermal insulation
THERM+ H-V 50/56/76 mm
Uf-values pressure profile coated
Mullion section/transom section
■ Technical information
– Uf-value in W/(m2K) acc. to DIN EN ISO 10077-2
including screw influence 0.18.
– Values also valid for all approved interior
gasket variants.
– Values valid for exterior gasket 3 mm
and all standard pressure profile options.
– T13 = Infill thickness.
Uf-values mullion
Infill
thickness
mm
System width mm
50
56
76
24
2.12
2.09
1.96
28
2.06
2.03
1.93
32
2.02
1.99
1.91
36
1.97
1.95
1.88
40
1.94
1.93
1.87
44
1.91
1.90
1.85
48
1.88
1.88
1.83
52
1.86
1.86
1.82
56
1.84
1.84
1.80
60
1.83
1.82
1.79
64
1.81
1.81
1.78
Uf-values transom
522
2016
HV-0142
Infill
thickness
mm
System width mm
50
56
76
24
2.05
2.00
1.88
28
2.00
1.96
1.85
32
1.96
1.93
1.83
36
1.93
1.89
1.82
40
1.90
1.86
1.80
44
1.87
1.84
1.79
48
1.85
1.82
1.78
52
1.83
1.80
1.77
56
1.82
1.79
1.76
60
1.80
1.78
1.75
64
1.79
1.77
1.74
THERM+ H-I/H-V
Thermal insulation
THERM+ H-V 50/56/76 mm
Uf-values flat pressure profile coated
Mullion section/transom section
■ Technical information
– Uf-value in W/(m2K) acc. to DIN EN ISO 10077-2
including screw influence 0.18.
– Values also valid for all approved interior
gasket variants.
– Values also valid for all approved
screw connection variants.
– T13 = Infill thickness.
Uf-values mullion
Infill
thickness
mm
System width mm
50
56
76
24
2.43
2.39
2.20
28
2.32
2.29
2.13
32
2.24
2.22
2.08
36
2.17
2.15
2.04
40
2.11
2.11
2.01
44
2.07
2.06
1.98
48
2.03
2.03
1.96
52
2.00
2.00
1.95
56
1.97
1.97
1.93
60
1.95
1.95
1.91
64
1.93
1.93
1.90
Uf-values transom
HV-0143
System width mm
50
56
76
24
2.34
2.28
2.09
28
2.24
2.20
2.04
32
2.18
2.14
2.00
36
2.11
2.08
1.96
40
2.07
2.04
1.94
44
2.03
2.00
1.92
48
1.99
1.97
1.90
52
1.97
1.94
1.88
56
1.94
1.91
1.87
60
1.92
1.90
1.86
64
1.90
1.88
1.85
2016
523
THERM+ H-I/H-V
Thermal insulation
Infill
thickness
mm
THERM+ H-I/H-V
Thermal insulation
THERM+ H-V 50/56/76 mm
Uf-values insulating block 9
Mullion section/transom section
■ Technical information
– Uf-value in W/(m2K) acc. to DIN EN ISO 10077-2
including screw influence 0.18.
– Values also valid for all approved interior
gasket variants.
– Values valid for exterior gasket 3 mm
and all standard pressure profile options.
– Values also valid für all standard cover and
pressure profile options with insulating block 9.
– T13 = Infill thickness.
Uf-values mullion
Infill
thickness
mm
System width mm
50
56
76
24
1.67
1.64
1.55
28
1.63
1.59
1.52
32
1.59
1.56
1.50
36
1.55
1.53
1.48
40
1.53
1.51
1.46
44
1.51
1.49
1.45
48
1.49
1.47
1.43
52
1.48
1.46
1.43
56
1.46
1.45
1.42
60
1.45
1.44
1.41
64
1.44
1.43
1.40
Uf-values transom
524
2016
HV-0135
Infill
thickness
mm
System width mm
50
56
76
24
1.63
1.59
1.49
28
1.59
1.55
1.47
32
1.55
1.52
1.45
36
1.53
1.49
1.44
40
1.51
1.47
1.42
44
1.48
1.46
1.41
48
1.47
1.44
1.40
52
1.45
1.43
1.39
56
1.44
1.42
1.39
60
1.43
1.41
1.38
64
1.42
1.40
1.37
THERM+ H-I/H-V
Thermal insulation
THERM+ H-V 50/56/76 mm
Uf-values insulating block 21
Mullion section/transom section
■ Technical information
– Uf-value in W/(m2K) acc. to DIN EN ISO 10077-2
including screw influence 0.18.
– Assembly of insulating block 17, no. 151035
for system width 76 mm.
– Values also valid for all approved interior
gasket variants.
– Values valid for all standard cover profile options.
– T13 = Infill thickness.
Uf-values mullion
Infill
thickness
mm
System width mm
50
56
76
24
1.33
1.28
1.41
28
1.27
1.23
1.38
32
1.22
1.19
1.36
36
1.19
1.17
1.34
40
1.18
1.15
1.33
44
1.16
1.14
1.32
48
1.16
1.13
1.31
52
1.14
1.12
1.30
56
1.14
1.12
1.29
60
1.13
1.11
1.29
64
1.13
1.11
1.28
Uf-values transom
HV-0137
System width mm
50
56
76
24
1.32
1.27
1.38
28
1.25
1.21
1.34
32
1.20
1.17
1.32
36
1.17
1.14
1.31
40
1.16
1.13
1.30
44
1.15
1.12
1.29
48
1.13
1.11
1.28
52
1.13
1.10
1.27
56
1.12
1.10
1.27
60
1.12
1.09
1.26
64
1.12
1.09
1.26
2016
525
THERM+ H-I/H-V
Thermal insulation
Infill
thickness
mm
THERM+ H-I/H-V
Thermal insulation
THERM+ H-V 50/56/76 mm
Uf-values insulating block 21
Mullion section/transom section
■ Technical information
– Uf-value in W/(m2K) acc. to DIN EN ISO 10077-2
including screw influence 0.18.
– Assembly of insulating block 17, no. 151035
for system width 76 mm.
– Values also valid for all approved interior
gasket variants.
– Values vaild for all standard pressure profile options.
– T13 = Infill thickness.
Uf-values mullion
Infill
thickness
mm
System width mm
50
56
76
24
1.33
1.28
1.43
28
1.27
1.23
1.39
32
1.23
1.19
1.37
36
1.20
1.17
1.35
40
1.18
1.16
1.34
44
1.17
1.14
1.33
48
1.16
1.13
1.32
52
1.14
1.13
1.31
56
1.14
1.12
1.30
60
1.13
1.11
1.30
64
1.13
1.11
1.29
Uf-values transom
526
2016
HV-0140
Infill
thickness
mm
System width mm
50
56
76
24
1.32
1.27
1.39
28
1.26
1.22
1.35
32
1.21
1.18
1.33
36
1.18
1.15
1.32
40
1.16
1.13
1.30
44
1.15
1.12
1.29
48
1.14
1.11
1.29
52
1.13
1.11
1.28
56
1.13
1.10
1.28
60
1.12
1.10
1.27
64
1.12
1.09
1.27
THERM+ H-I/H-V
Thermal insulation
THERM+ H-V 50/56/76 mm
Uf-values insulating block P
Mullion section/transom section
■ Technical information
Selection insulating block
– Uf-value in W/(m K) acc. to DIN EN ISO 10077-2
including screw influence 0.18.
– Values also valid for all coated standard pressure
profile options with visible screw connection.
– Values also valid for all approved interior
gasket variants.
– Values valid for exterior gasket 3 mm
and all standard cover profile options.
– All values passive house standard.
– From infill thickness 44 mm:
- Passive house certified for system width 50 and 56 mm.
- Execution with insulating block P no. 168514 (50 mm) or 168520 (56 mm).
– T13 = Infill thickness.
2
Infill
thickness
mm
System width mm
50
56
76
No.
No.
No.
24 to 27
168509
168515
168521
28 to 41
168510
168516
168522
42 to 64
168514
168520
168522
Uf-values mullion
Infill
thickness
mm
System width mm
50
56
76
24
1.32
1.27
1.22
28
1.28
1.24
1.19
32
1.15
1.12
1.08
36
1.12
1.09
1.05
40
1.09
1.07
1.04
44
0.94
0.92
1.03
48
0.93
0.91
1.02
52
0.93
0.91
1.02
56
0.92
0.90
1.02
60
0.92
0.90
1.01
0.91
0.90
1.00
64
Values passive
house certified
Uf-values transom
System width mm
50
56
76
24
1.31
1.26
1.20
28
1.26
1.22
1.17
32
1.14
1.11
1.06
36
1.11
1.07
1.04
40
1.08
1.05
1.02
44
0.94
0.91
1.01
48
0.93
0.90
1.00
52
0.92
0.90
1.00
56
0.91
0.89
1.00
60
0.91
0.89
1.00
0.91
0.89
0.99
64
Values passive
house certified
HV-0138
2016
527
THERM+ H-I/H-V
Thermal insulation
Infill
thickness
mm
THERM+ H-I/H-V
Thermal insulation
THERM+ H-V 50/56/76 mm
Uf-values insulating block P
Mullion section/transom section
■ Technical information
Selection insulating block
– Uf-value in W/(m K) acc. to DIN EN ISO 10077-2
including screw influence 0.18.
2
– Values also valid for all approved interior
gasket variants.
– Values also valid for all approved
screw connection variants.
– All values passive house standard.
– T13 = Infill thickness.
Infill
thickness
mm
System width mm
50
56
76
No.
No.
No.
32 to 37
168509
168515
168521
38 to 51
168510
168516
168522
52 to 64
168514
168520
168522
Uf-values mullion
Infill
thickness
mm
System width mm
50
56
76
32
1.25
1.21
1.15
36
1.14
1.11
1.06
40
1.09
1.06
1.02
44
1.05
1.03
0.99
48
1.02
1.00
0.97
52
0.90
0.89
0.96
56
0.89
0.87
0.96
60
0.87
0.86
0.95
64
0.87
0.86
0.94
Uf-values transom
528
2016
HV-0136
Infill
thickness
mm
System width mm
50
56
76
32
1.24
1.20
1.14
36
1.14
1.11
1.05
40
1.08
1.05
1.01
44
1.04
1.02
0.98
48
1.01
0.99
0.97
52
0.90
0.88
0.95
56
0.88
0.86
0.95
60
0.87
0.85
0.93
64
0.87
0.84
0.93
THERM+ H-I/H-V
Thermal insulation
THERM+ H-V 50/56 mm
Uf-values pressure profile uncoated and cover profile, insulating block PH
Mullion section/transom section
■ Technical information
– Uf-value in W/(m2K) acc. to DIN EN ISO 10077-2
including screw influence 0.18.
– Values also valid for all approved interior
gasket variants.
– Values valid for exterior gasket 3 mm
and all standard cover profile options.
– All values passive house standard.
– From infill thickness 40 mm:
- Passiv house certified with system width 50 mm.
– T13 = Infill thickness.
Uf-values mullion
Infill
thickness
mm
System width mm
50
56
36
1.05
1.03
40
0.98
0.97
44
0.93
0.93
48
0.91
0.90
52
0.88
0.88
56
0.87
0.87
60
0.85
0.86
64
0.84
0.85
Values
passive
house
certified
Uf-values transom
System width mm
50
56
36
1.03
1.02
40
0.97
0.96
44
0.91
0.90
48
0.88
0.87
52
0.86
0.85
56
0.84
0.84
60
0.83
0.83
64
0.82
0.82
THERM+ H-I/H-V
Thermal insulation
Infill
thickness
mm
Values
passive
house
certified
HV-0181
2016
529
THERM+ H-I/H-V
Thermal insulation
THERM+ H-V 76 mm
Uf-values pressure profile uncoated and cover profile, insulating block PH
Mullion section/transom section
■ Technical information
– Uf-value in W/(m2K) acc. to DIN EN ISO 10077-2
including screw influence 0.18.
– Values also valid for all coated standard pressure
profiles with visible screw connection.
– Values also valid for all approved interior
gasket variants.
– Values valid for exterior gasket 5 mm
and all standard cover profile options.
– All values passive house certified.
– T13 = Infill thickness.
Uf-values mullion
Infill
thickness
mm
System width
mm
44
0.87
48
0.85
76
52
0.84
56
0.83
60
0.81
64
0.81
Uf-values transom
530
2016
HV-0139
Infill
thickness
mm
System width
mm
44
0.86
48
0.84
52
0.82
76
56
0.81
60
0.80
64
0.80
THERM+ H-I/H-V
Thermal insulation
THERM+ H-I 50/56 mm
Uf-values pressure profile coated, insulating block PH
Mullion section/transom section
■ Technical information
– Uf-value in W/(m2K) acc. to DIN EN ISO 10077-2
including screw influence 0.18.
– Values also valid for all approved interior
gasket variants.
– Values valid for exterior gasket 3 mm
and all standard pressure profile options.
– All values passive house standard.
– T13 = Infill thickness.
Uf-values mullion
Infill
thickness
mm
System width
mm
50
56
36
1.05
1.03
40
0.99
0.97
44
0.94
0.93
48
0.91
0.90
52
0.88
0.88
56
0.87
0.87
60
0.86
0.86
64
0.84
0.85
Uf-values transom
HV-0182
System width
mm
50
56
36
1.03
1.02
40
0.97
0.95
44
0.91
0.90
48
0.88
0.87
52
0.86
0.85
56
0.84
0.84
60
0.83
0.83
64
0.82
0.82
2016
531
THERM+ H-I/H-V
Thermal insulation
Infill
thickness
mm
THERM+ H-I/H-V
Thermal insulation
THERM+ H-I 50/56 mm
Uf-values flat pressure profile coated, insulating block PH
Mullion section/transom section
■ Technical information
– Uf-value in W/(m2K) acc. to DIN EN ISO 10077-2
including screw influence 0.18.
– Values also valid for all approved interior
gasket variants.
– Values also valid for all approved
screw connection variants.
– All values passive house standard.
– T13 = Infill thickness.
Uf-values mullion
Infill
thickness
mm
System width
mm
50
56
44
0.98
0.96
48
0.92
0.91
52
0.88
0.87
56
0.85
0.84
60
0.83
0.83
64
0.82
0.81
Uf-values transom
Infill
thickness
mm
532
2016
HV-0183
System width
mm
50
56
44
0.97
0.95
48
0.91
0.89
52
0.86
0.85
56
0.83
0.82
60
0.81
0.80
64
0.80
0.79
Technical Conditions
1. General Conditions
All RAICO products have been developed or selected for usage
in the construction of façades, windows, and doors. They are
meant to be assembled by specialized companies following the
acknowledged technical regulations, in particular as applicable to
constructing façades, windows, and doors, and also following all
directives, norms, regulations and recommendations which are
standards within the industry. All RAICO documentation should be
considered as non-binding recommendations in regard to the
planning, designing, processing, finishing and assembly of these
products. They are intended to offer suggestions to the certified
specialist, or inform on successful applications. The specialist must
always check carefully whether the suggestions and documentations are appropriate also in his particular case, and in every respect.
Scope of delivery and RAICO warranty
Our scope of delivery covers the contents of our known Sales
Terms. We assume no liability for damages caused by the use of
system accessories, parts, and hardware which are not named
in our product documentation as suitable original parts and hardware.
Advisory service by RAICO employees
Our specialists offer free-of-charge advisory services and
recommendations. All suggestions, proposals, designs and the
like, be it in written or oral form, calculations, drawings, sketches
etc. provided by our employees in the course of advice given or
by mutual correspondence, are to be considered as non-binding
suggestions from our company, and thus result in limiting our
liability to deliberate intention and culpable negligence only. This
limit also applies to construction designs and tender documents.
Support in cost estimation
Help regarding the estimation of costs is offered to the best of
our knowledge and is in any case non-committal. Generally
speaking, material prices are calculated only concerning
RAICO’s product range. Supplements for operating costs, as
well as times for manufacture and assembly are calculated
according to manufacturer’s instructions.
Statics
The statics information published by us, as well as the Chart on
the greatest possible window dimensions have been prepared to
the best of our knowledge. Construction elements dimensioned
according to the correct application of this information and processed expertly are thus sufficiently dimensioned in line with the
currently applying industry norms. Supporting structures and
enforcements must be defined according to individual static
calculations. Our suggestions and proposals regarding statics
have to be checked by the processing specialist, by a certified
stress analyst, or by the architect before order placement, and
be accepted by the orderer.
2. Requirements regarding the processing
company
Production facilities
An essential preliminary for the professional processing of RAICO
products is the availability of appropriate technical devices and
machinery in the company which will process RAICO materials.
Facilities must be furnished in such a way that profiles and
construction parts will not be damaged during storage, removal
or processing. All materials and parts must be stored in a dry
place and in a way that they will not be subject to damage
caused by external influences. In particular, they must be safely
kept away from lime, mortar, dirt, steel chips, grinding sparks,
acids, and the like. Concerning the use of solvents, the Data
Sheet (MO 17) published by the Berufsgenossenschaft der
chemischen Industrie (the German Government Safety Organization of Chemical Industries) is binding.
Instructions and employee training
In order to keep up with newest technical standards it is essential
to provide the necessary training - by the study of our documentations on how to process our materials and products, by the
study of specialist literature, by visiting seminars etc.
Dimensions, drawings, statics
All measures such as site measuring, cutting measures, glass
measures must be determined by the processing company
independently. It is necessary to back up details, connections
etc. with the help of drawings, and to carry out static calculations
for stressed profiles and bracings, and have them checked if
applicable.
3. Norms
The basis for these Technical Conditions are the following relevant
DIN norms (German industrial standards), or DIN EN norms
respectively, applying to the construction of façades, windows
and doors:
DIN 1055
– Parts 1 to Part 5, load assumptions for
buildings.
– Part 4 A 1 (Additional DIN 1055 Part 4),
aerodynamic form co-efficients for building
structures
DIN 4102
– Parts 5, 13, 18, reaction of building materials
and components to fire
DIN 4108
– Parts 1 to 5, heat protection in high-building
DIN 4109
– Sound proofing in high-building
DIN 12209
– Building hardware – locks - mechanically
actuated locks and strike plates - requirements and testing procedures
DIN 17611
– Anodized semi-finished goods made of aluminium and forgeable aluminium alloys with
layer thicknesses of at least 10 mm, technical delivery terms
DIN 18056
– Window walls, dimensioning and
construction
DIN V 18073
– Closing-off by rolling elements, sun protection devices and blinds in construction,
definition of terms and requirements
DIN 18095
– Parts 1, 2 smoke protection doors
DIN 18202
– Tolerances in high-building, buildings
DIN 18263
– Part 1 and Part 4, locks and hardware, door
locking devices with hydraulic
absorption
DIN 18273
– Door handle fittings, doors with protection
against fire and smoke
DIN 18351
– VOB (German Construction Contract
Procedures), Part C General technical contractual terms for construction work and façade works
DIN 18357
– VOB (German Construction Contract
Procedures), Contracting rules for award of
public works Part C, General technical regulations for construction work, hardware
works
DIN 18358
– VOB (German Construction Contract
Procedures), Contracting rules for award of
public works Part C, General technical regulations for construction work, rolling shutter works
DIN 18360
– VOB (German Construction Contract
Procedures), Contracting rules for award of
public works Part C, General technical regulations for construction work, metal construction work, locksmith works
2016
533
Technical Conditions
DIN 18361
– VOB (German Construction Contract
Procedures), Contracting rules for award
of public works Part C, General technical regulations for construction work, glazing
works
DIN 18516
– Parts 1, 3, 4, cladding for external walls
ventilated at rear
DIN 18545
– Parts 1 to 3, sealing of glazings with sealing
compounds
DIN EN 356
– Assault-inhibiting glazings; testing of
features inhibiting assault with cutting and
beating tools. Testing of features inhibiting
full-penetration throwing, classification
DIN EN 573
– Parts 3 and 4, extruded aluminium sheets
and sheets made of forgeable aluminium alloys, features and technical delivery terms
DIN EN 755
– Parts 1 and 2, extruded aluminium sheets
and sheets made of forgeable aluminium alloys, features and technical delivery terms
DIN EN 1063
– Assault-inhibiting glazings, definition of
terms; testing of feature inhibiting fullpenetration shots, and classification
DIN EN 1154
– Door locking devices with hydraulic
absorption, automatic door closers with
linear operation, door closers
DIN EN 1155
– Door closers with hydraulic absorption:
lockable door closers with and without override
DIN EN 1522
– Windows, doors, closings-off – inhibition of
full-penetration shots – requirements and
classification
DIN EN 1523
– Windows, doors, closings-off - inhibition
of full-penetration shots – requirements and
testing procedures
DIN EN 1627
– Windows, doors, closings-off – burglary
inhibition – requirements and classification
DIN EN 1628
– Windows, doors, closings-off – burglary inhibition – testing procedures for deter-mining the resistance against static stress
DIN EN 1629
– Windows, doors, closings-off – burglary inhibition – testing procedures for deter-mining the resistance against dynamic impact
DIN EN 1630
– Windows, doors, closings-off – burglary inhibition – testing procedures for deter-mining the resistance against manual
attempts at burglary
DIN EN 12152
– Light curtain-wall façades, joint permea-bility, requirements and classifications
DIN EN 12153
– Light curtain-wall façades, joint permea-bility, inspection method
DIN EN 12154
– Curtain-wall façades, tightness to hard rain,
laboratory testing under static stress
DIN EN 12179
– Light curtain-wall façades, resistance to
wind stress
DIN EN 12207
– Windows and doors, air permeability,
classification
DIN EN 12208
– Windows and doors, tightness to heavy
rain, classification
– Part 4: Laboratory testing
DIN EN ISO 10077-1 – Thermo-technical qualities of windows,
doors, and joints
TRLV
– Technical regulations for the usage of
glazings with linear supports
TRAV
– Technical regulations for the usage of
glazings with anti-fall guards
534
2016
All our systems and technical products have been developed
in accordance with the preliminaries and conditions of the Deutsche Institut für Normung e. V. (DIN, i. e. German Institute for
Industrial Norms). In individual cases, deviations from norms
valid outside the coverage of DIN standards may occur. Our
customers are advised in any case to make comparisons with
valid national norms and standards as well.
Quality control
The features and functions of our systems, as described and
evaluated in test reports, certificates etc. can only be expected
when using original RAICO products. In order to ensure perfect
quality, only our original parts should be processed.
Regulations and recommendations
VDI (Association of German Engineers) regulation 2719 – sound
protection Chart for determining the exposure categories regarding
window glazing – Institut für Fenstertechnik e. V. Rosenheim
(Institute for Window Technology), explanatory notes on glazing
– Institut des Glaserhandwerks für Verglasungstechnik und
Fensterbau (German glazing crafts institute for glazing technology and window construction).
Systems admitted by building inspection authorities must be
manufactured according to the admittance declarations (DIBt).
Deviations from the admittance declarations must in any case
be authorized by the superior building supervision authorities.
4. Materials and products
Materials delivered by us have been manufactured according to
applying norms and standards. Materials and products made of
materials produced outside our area of influence are to be selected
by the processing company at their own accountability.
Aluminium
For the manufacture of aluminium windows, façades, etc. we deliver
anodized profiles made of AlMgSi 0.5 F 22 alloy. For specific
anodizing procedures, such as single-stage procedures, deviating
specific alloys must be used. Specific alloys can be delivered by
us only upon prior inquiry and agreement from our side.
Extruded aluminium sheetsare delivered in accordance with DIN
17615. We deliver metal sheets and bands in accordance with
DIN EN 485, Parts 1 and 2. Various materials and forms
of delivery (profiles, metal sheets, bands) are to be adjusted
according to the required looks and appearance.
Profiles made of plastic
The qualities of the used molding material corresponds at least
to the molding material PVC-U, EDLP, 078-25-28 according to
DIN EN ISO 1163, Parts 1 and 2. Slight flat unevenness caused
by production are admissible inasmuch as their correct functioning
will not be affected.
Steel
Regarding steel parts necessary for load-bearing construction
elements and anchoring constructions, DIN 18800 Part 4 and
DIN 18801 apply. All steel parts no longer accessible after
assembly must be galvanized. Admitted procedures are hot
galvanization and flame spraying galvanization. DIN EN ISO 1461
applies regarding the welding spots of galvanized constructions,
and the spots where the corrosion protection of the steel parts is
subject to damage during assembly. Parts no longer accessible
after assembly must have a surface protection according to
DIN 18360 fig. 3.1.8 or higher.
Joining elements
Connecting elements such as screws, bolts, rivets etc. must
be sufficiently protected against corrosion. If used together with
aluminium they must be made of specific alloys. Aluminum may
be used for parts exposed to less static stress.
Technical Conditions
Under particular climatic or other environmental influences,
fixing elements made of stainless steel A4 must be used,
especially when visible outside. The processing company has
to make sure about their usage at its own accountability.
Hardware
According to our specifications, RAICO hardware and relating
components are sufficiently dimensioned and protected against
corrosion in regard to the expected exposure and wear. Hardware parts are to be selected by the processing company according
to the wear and tear expected under normal conditions. Only
hardware as approved and admitted by us is to be used.
Movable hardware parts must be maintained.
Thus the wear and tear of movable parts and their susceptibility
to corrosion will be reduced. The intervals for cleaning and care
depend on the environmental conditions
Glass
The particular guidelines issued by glass manufacturers regarding
the processing of insulation glass and special glass apply. Glass
manufacturers must produce triplex glass in general, and duplex
glass from a glass thickness of 36 mm and higher on the standing
edge, to ensure even glass load transfer.
Sealing compounds for glazing and sealing
Used sealing compounds must be resistant to influences of age
and climate, and have to be malleable or permanently elastic,
depending on the applied load. They must be suitable to their
intended purpose, in line with DIN 18545 according to all applying
individual requirements.
Sealing profiles
The sealing profiles which are used must be non-hardening and
abrasion-proof, and must keep their elastic qualities including
their reset force to a large extent within the existing temperature
range. The shore hardness must remain the same with only little
tolerances. Sealing profiles have to be resistant to normal
atmospheric influences.
Assembly of various materials
When assembling various materials, it must be ensured that
neither corrosion nor other unfavorable influences occur.
In particular it must be ensured that no disturbing sounds will
be caused by changes in length as a result of temperature influences.
System drainage
The drainage of the system must be provided for. Penetrating water
must be drained off in any case. Please refer to the drainage cross
section as shown in RAICO’s processing guidelines.
All openings and joints in the frame (such as screw holes, notches
of the corner connectors, and the like) must be made tight, particularly regarding the lower horizontal zone. Water tightness at miter
joints, joints and crossings of the construction must be ensured.
Assembly of the components
Where the construction makes joints necessary, additional polytuft brushes, or EPDM/chloroprene sealings respectively, must
be used for soundless moving and gliding. Where directly joined
or screwed profiles and components have been used, functional
sealing bands or interlayers are to be used in order to avoid
permeability, sound emission caused by expansion, and contact
erosion.
Static requirements
All components must absorb the affecting forces and transfer
them to the supporting structure of the building. DIN 18056 on
window walls, dimensions and processing applies.
Wind loads
Wind loads must be considered according to DIN 1055, Part 4
with the addition on increased suction coefficients (at the building
edges), if no exceeding loads are indicated.
Superficial loads
If the load of a person leaning out affects the transom (when the
window wing is open), the additional vertical load which is then
required must be considered as well. In case of ceiling-high infills
the horizontal superficial loads (caused by persons pressing
against the mullion or transom from the inside) must be accounted
for.
Special loads
Additional loads, such as sun protection devices, scaffolds, etc.
must be considered in the static calculations. Our standard
products and systems are not to be used in maritime environments,
swimming pools and spas without prior modifications.
Bending
5. Construction features
The determined flection of mullion and transom must be in
accordance with the requirements as defined in DIN 18056. Additional requirements, especially for the utilisation of special
glass panes, must be considered when calculating the admissible
flection.
System profiles
Protection against heat and humidity
We only deliver profile systems which have been tested, admitted
and certified, if necessary, by an acknowledged test institute or
by the DIBt. The processing company will itself select the profile
systems to be used, considering the expected requirements.
Profile dimensions regarding frame, wing, mullion and transom
are to be determined according to statics for profiles and hardware.
For blind frames and sashes, hollow profiles are to be used in
general.
According to DIN 4108 on heat protection in high-building, building
components are among light external walls when featuring weights
of up to 300 kg/m². The resulting influences on the room climate
must be particularly considered, above all regarding the type
and location of heating and air conditioning, heat storage, wall
surfaces, and the respective solar radiation. The builder’s
requirements are to be tuned to the economical and technical
possibilities in window construction. In particular, DIN 4108
applies here. Drainage measures must be agreed. The applicable
insulation and avoidance of thermal bridges must be considered
when external wall claddings, carriers, supports, panels and
other fillings are used.
Corner connectors and T-connectors
The production of corner connectors, T-connectors, butt joints
and angle couplings for construction elements, by welding,
screwing and bonding, bonding with off-center pins, pressing and
bonding, must be done in accordance with the valid regulations. For
an adhesive a cold-hardening two-component glue is to be used.
The joints must feature sufficient firmness, stiffness and tightness
throughout the complete profile’s cross-section.
Rear-ventilated wall claddings
Wall claddings and socle wainscotings ventilated from the rear
must be done in a fashion that little quantities of water having
penetrated the ventilation gap are led to the outside in a con-
2016
535
Technical Conditions
trolled manner. Inasmuch as is required, anti-drumming devices
have to be built in. The openings for entering and escaping ventilation air must be distributed evenly over the width, their total
resulting in a sufficient cross section. In any case, a rear-ventilated
façade requires a perfectly insulated and airtight wall.
Sound proofing
For bigger sheet surfaces, claddings, cover profiles and window
sills, anti-drumming materials must be used. VDI guideline 2719
on the sound protection of windows and DIN 4109 on sound
protection in high-building are the basics. If higher requirements
than those defined in sound-protection category 2 are demanded,
particular requirements must be considered and agreed.
Sun protection
Sun protection devices and the resulting construction design must
be agreed between the processing company and the builder.
Protection against fire and smoke
Due to building regulations and obligations by local authorities
differing regionally, protective measures against fire and smoke
must be taken from the tender documentation, or agreed with the
orderer.
Movement and deformation of building
and building components
Building components must not absorb loads from the structure.
Snow loads, differences in temperature, as well as lowering and
shrinking must be considered. Expansion joints must be done
accounting for differences in temperature from - 20° to + 60°
Centigrade with light surfaces of natural color; with colored and
dark surfaces from -20° to +80° Centigrade.
6. Production
Accuracy grade, surface qualities and deformation risks have to
be checked before cutting. For the manufacture and processing
of our constructions we provide multiple processing guidelines,
tools, and auxiliary means to the processing company, which
serve as a help to reach the required quality standards. General
basic processing instructions will not be mentioned here.
For reasons of quality assurance profile parts up to a
length of 10 cm of each batch are taken from some parts
of the RAICO composites.
Processing
The focus must be on the angular accuracy during cutting and
assembly in particular. With steel profiles or heat-insulated profiles,
fitting pieces should be used for precise cutting. The effect
caused by released internal stress, deflection and the like in
the profiles must be checked not only before and after cutting,
but also after milling and stamping. The cutting edges must be
deburred carefully. Especially the burs from the workpiece must
be removed wherever they inhibit correct functioning or result
in possible accident hazards.
During production, the following issues must be carefully observed:
a) Accuracy of fit, flush corner connections and joints
b) Dimensional accuracy of profiles and components
c) Build-in of sealings and tightness, fitting accuracy of corners
and joints
d) Drainage (dimensioning and distribution)
e) Sealing of all profile joints, notches, and screwing
f) Fitting accuracy of the wing bearing
536
2016
g) Damages to the surface
h) Hardware must be mounted according to the newest state-ofthe-art technology and to our specific instructions in such a
way that the smooth-running motion (by lubrification), correct
fit of the hardware, and tightness of the component will all be
ensured.
i) Lubrification of all moving parts (lock bars, scissors, handles, etc.)
Function test
RAICO components, being high-quality items with long life
cycles, should fulfill, among others, the following requirements:
Tightness against heavy rain
A window’s tightness against water penetration is defined according
to DIN EN 12208, and is categorized by four exposure groups.
The exposure group to be chosen depends on the geographical
location, a normal or excessive wind load, the form of the building,
the position of the building and its height. If not agreed otherwise,
DIN EN 12208 applies.
Hardware function
Ensuring the easy operation of all hardware.
Faultless functioning of the safety devices, or the faulty-operation
blockers respectively.
Surface treatment of aluminium
All component surfaces have to be protected against influences
normally expected. The processing company decides at its own
accountability on the suitable individual surface treatment. It will
also make sure that specific features of the construction, such as
the combination with metals of higher value within the electrochemical series (Cu, Sn, Pb etc.), will be considered, as well as
specific emissions caused by the individual location including the
effect of sea water. We do not give any warranty for profiles
hardware and components which have been anodized or colorcoated outside our area of influence; in particular this applies to
combinations of heat-insulated profiles.
Anodic oxidation
The surface treatment of components made of aluminium must
be carried out in accordance with DIN 17611. The look of the surface in regard to shine, structure, color shade, and evenness,
and the required surface treatment (E0 – E6) are to be taken from
the tender documentation or agreed individually.
For color shading only procedures are admissible which create
oxidation layers that are color-fast and light resistant without
exception. For judging varieties in appearance and color, an
evaluation by means of average or limit samples must be agreed.
Please observe:
The E0 procedure is only applicable in case that there are no
demands whatsoever regarding an even, decorative surface.
The E6 procedure may only be applied under the condition that the
factory-packed aluminium can be transported within an assuredly
short time from the manufacturing factory to the anodizing workshop. The profiles must not be exposed to humidity and/or affected
by human sweat, or subjected to lack of packaging during transport, storage, inappropriate handling and the like. If these preliminaries are not observed, RAICO cannot accept any warranty
claims.
Coating
Color coating procedures of the surface of aluminium components
are not standardized. Due to the various possible procedures,
details are to be taken from the tender documentation, or agreed
with the orderer and RAICO (in case we deliver surface-coated
Technical Conditions
profiles). Regarding high-gloss colors undesirable effects may
be more clearly visible than in case of standard coating. This
cannot be influenced by RAICO. At offshore locations and in
indoor swimming pools with brine water or sea water, filiform
corrosion may occur. In these cases the usage of pre-anodized
profiles is recommended. Please inquire for more details.
Protective measures during completion time
According to VOB (Contracting Rules for Award of Public Works),
the building owner is liable to all damages regarding his services
until buy-off through the building owner. For temporarily protecting
the components during completion time, in particular against
mechanical damage or damaging effects of plaster, mortar, cement,
color and the like, adhesive tapes, plastic foils and suitable protective paint can be used which can be removed later without leaving
traces.
7. Transport and assembly
During transport and storage, appropriate protective measures
are to be taken in order to avoid damages. Assembly of the components is to be done only after having finished all plastering
work. On demand of the building owner and for a certain compensation to be agreed on, the components must be protected
against possible damage with the help of protective bands or
foils in case later plastering work is carried out.
Fastening
Build-in and bracing must be carried out according to DIN 18056
and DIN 18360. It must be ensured that the bracing safely transfers forces from the building component to the structure. The fixing elements must be adjusted to the building shell, supporting
the adjoining profiles in such a way that they will be protected
against torsion and bending. In case the firmness in the bracing
spots seem doubtful, the orderer must be informed without delay
according to VOB/B § 4, Paragraph 3 (German Construction Contract Procedures). If components with moving wings, mullions and
transoms are used, the blind frames must be mounted in such a
way that the forces emanating from bands, bearings, mullions
and transoms will be transferred to the structure. Each side of the
window wall must be joined to the structure at least at two points.
The maximum distance of the bracing spots is 80 cm. The necessary assembly clearance, caused by thermal expansion of the
building components, necessary sealing joints, and dimensional
changes of the adjacent components has to be controlled by
means of expansion joints. If required, gliding elements for expansion compensation which are soundproof, airtight and watertight
must be used. During mounting and plastering, door frames should
be planned, also considering heat insulation and moisture barriers.
Sealing
If not defined otherwise in the tender documentation, the parts of
the building which serve as brick partitions (such as windows, window walls, doors, etc.) must be sealed in the joints of the building
structure and the components by suitable sealing materials. The
joints must be tight and sealed according to DIN 18360 and DIN
18540. Bigger hollow spaces at joining walls or joints in the
construction have to be rear-ventilated by using water-repellent
bands to fill the joints, with pore blocking. Only bands are allowable
which can change their volume elastically due to their structure.
Exterior joints and joining walls are sealed by means of permanent
sealing agents or EPDM foils to be glued or clamped. For proper
processing, sealing joints must be clean, dry and greaseless. The
sealing joints must be dimensioned according to the instructions
given by the manufacturers producing sealing agents.
Glazing
The glazing of window panes, panels, fillings and the like is to be
carried out according to DIN 18361 (glazing work). Glass manufacturers’ guidelines on glazing procedures must be observed. The
company in charge of window construction, if not carrying out the
glazing itself, upon order receipt must agree on the precise manner
and execution of glazing works with the glazing company before
placing the order on glass. The glazing contractor has to be
informed on the selected system type, or way of mounting. The
guidelines issued by the German Institute of Glazing Crafts
referring to glazing technology and window construction, and the
processing guidelines issued by the sub-suppliers of glass panels
and insulation glass must be considered.
Wet glazing
For wet glazing the ‘Chart for determining the exposure categories of window glazing’, published by the German Institute for
Window Technology must be considered.
Dry glazing
For dry glazing with duplex sealing profiles, the rebate must
generally be equipped with a ventilation system and a controlled
drainage system towards the outside. Materials used for the
sealing profiles will be selected according to expected exposure.
When processing the sealing profiles it is important that the tolerances and dimensions of the rebate width without sealing, of the
sealing itself, and of the filling elements (e. g. the glass pane) will
be adjusted to each other, ensuring that the adding tolerance
values will not exceed the maximum allowances, and that they
will remain water-tight (please see processing guidelines).
Principally, however, the guidelines on glazing are to be considered.
Pressure glazing
For pressure glazing the specific processing guidelines issued
by glass manufacturers and system producers must be followed.
Usage of blocks
With glass panes, panels, fillings and the like, blocks made of
plastic or impregnated water-proofed hardwood featuring a minimum length of 10 cm must be used in an expert way dependent
on the type of wing and rebate, to ensure that the wings will not
touch and scrape. When single-sheet glazing and insulation
glass are used, the guidelines on the use of blocks with even
glass panes must be observed (as issued by the German Institute of Glazing Crafts for Glazing Technology and Window Construction).
Controlled drainage
Rain water and leak water penetrating from other building
components must be collected right above the metal construction,
and drained off in a controlled manner. Water caused by rain,
condensation and leak caught in the construction itself must be
collected and drained off in a controlled manner within the lower
horizontal of each zone, whether applying to glazing zones or
wings with differing varieties of opening.
When collecting this water, the maximum level the water will
rise inside the collecting chamber must be taken into account,
also considering external pressure. The rising level should be at
least 10 mm and must be increased according to the expected
maximum external pressure. Collected water must be drained off
in a controlled manner to the outside, preventing it to penetrate
the building structure.
2016
537
Technical Conditions
Cleaning
Assembled components must be cleaned before buyoff, dirt
and soil caused by mounting must be removed. Only allowable
cleaning detergents may be used. Additional cleaning procedures
have been defined in Explanatory Note A 5 on cleaning aluminium
in construction (issued by the German Aluminum Center).
Protective measures
To ensure faultless functioning and long life-cycles of hardware
parts, suitable lubricants and grease have to be applied to moving
hardware elements.
Final inspection
Before delivery of the building components to the orderer, the
following functions must be checked:
a) the evenness of joints between frame and window sash, and
the even circumferential wing bearing
b) the easy motion and correct functioning of all hardware parts
c) the operation blockers
d) the correct and faultless fit of the wing seals
e) the openings for ventilation and drainage of the rebate.
538
2016
General terms of sale
§ 1 Validity of the General Terms of Sale
1. Our Terms of Sale shall apply exclusively. They shall apply even where we unreservedly
effect delivery to the Customer whilst aware of the Customer’s conflicting provisions or provisions at variance with our Terms of Sale. Customer’s diverging General Terms of Business
are hereby strictly opposed. These shall only form part of the Contract when their validity for
each individual contract has been explicitly confirmed in writing by us. Our failure to reply to
a letter of confirmation from the Customer requesting the incorporation of Customer’s Terms
of Business into the Contract shall not lead to the Customer’s Terms of Business being
incorporated here but rather this shall be deemed as a rejection in this respect. Conclusion of
the Contract shall not fail due to conflicting General Terms of Business. Each provision within
these Terms and Conditions shall be valid on its own. Our Terms of Sale shall only apply to
entrepreneurs pursuant to § 14, Section 1 of the German Civil Code (BGB) and to legal entities under public law or to special public funds. 2.Where colliding General Terms of Business
tally with one another, the concurring resolutions shall apply. Beyond this, those sections of
our Terms of Sale shall be deemed accepted where no provision in the Customer’s General
Terms of Business collides with them. On the other hand, those provisions in the Customer’s
General Terms of Business not fully concurring with the contractual substance of our General
Terms of Business shall not form part of the Contract. In all other cases jus dispositivum shall
apply . 3.These Terms of Sale shall apply in their current version also for all future contracts
on the delivery of goods and on subsequent deliveries between the Parties in this business
relationship without there being a need for repeated inclusion of, or reference to, these
Terms of Sale after the initial agreement. 4. In the case of written documents appended with
a translation into a foreign language relating to a Contract for which German is the official
language, the translation shall only serve as information. The German wording alone shall be
conclusive in determining the subject of the Contract. 5. All agreements concluded between
ourselves and the Customer for the purpose of implementing this Contract must be set down
in writing within this Contract. Additional agreements, subsequent changes to the Contract
and provisions of guarantees, in particular assurances of characteristics or the assumption
of procurement risks by non-authorised persons, must all be made in writing.
§ 2 Offers/Quotes
1. Offers made by us shall be subject to change. These represent an invitation to the Customer to place a binding offer for the conclusion of a Contract (order) and are therefore not
yet binding for us at this stage. We are entitled to accept orders within a period of 4 weeks.
During such time the Customer is legally bound to honour his order offer. 2. Contracts shall
not be binding for us unless we accept the order by means of written order confirmation. We
shall not be required to oppose a potential Customer’s written order relating to an offer of
this kind should the Contract fail to be concluded . 3. Descriptions and photographs of our
goods and products in catalogues, leaflets, circulars, advertisements and price lists, insofar
as these are not part of our quotation are always only approximate and shall only become
subject of the Contract when this is expressly indicated and laid down in the Contract.
Drawings, illustrations, dimensions, weights or other performance data shall only be binding
where this is expressly agreed in writing. 4. We reserve the right to make changes at any
time to the subject of the Contract prompted by technical progress, rationalisation or design
requirements insofar as these changes are within those that are customary in the trade and
are reasonable to the Customer. We also reserve the right to make those changes to colour,
weight etc. that are customary in the trade. 5. Should a change to the subject of the Contract
not fall within those customary in the trade and should it also not be reasonable to the Customer, the Customer shall be entitled to cancel the Contract – a right which he can exercise in
writing within 2 weeks of receiving relevant notification from us. Cancellation at a later date
shall be excluded due to the relevant amendment to the Contract having taken effect by then.
§ 3 Offer Charges, Offer Documentation and Copyrights
1. As a rule, the initial processing of an offer is free-of-charge. Further offers and planning
work shall only be free-of-charge when the delivery contract becomes valid and remains so.
2. We reserve ownership and copyrights on illustrations, drawings, designs, sketches, calculations and other documents; access to these may not be given to third parties without our
written consent. These may neither be copied nor reproduced in any other manner without
our consent and on request they must be returned to us once the order has been carried out.
3. Those moulds, samples and dies produced by us in order to fulfil the Contract shall remain
our property. Furthermore, we shall not be obliged to surrender these to the Customer even if
the price for these has been indicated separately in the Contract or invoice, in the absence of
explicit contractual agreements to the contrary. We shall be entitled to the copyrights for the
said moulds, samples and dies. 4. With goods manufactured to the Customer’s drawings,
specimens or other specifications, the Customer shall assume liability where patents and
other copyrights of third parties are violated. The Customer shall undertake to release us
from any such claims to this effect.
§ 4 Prices
1. Unless agreed otherwise, all prices shall be net “ex works” plus statutory VAT valid at the
invoice issue date. Additional costs such as packaging, freight, forwarding expenses, customs, assembly, insurance and bank charges shall be charged separately. 2. In the absence
of any other agreement to the contrary, we shall be bound to the prices agreed for a period
of 30 days. Should costs then change (in particular due to wage settlements or changes in
the cost of materials) once the commitment period has come to an end but prior to delivery,
we shall be entitled to alter the agreed prices respectively. On request we shall provide
proof of this change in costs. 3. With repeat orders prices shall be agreed upon afresh.
Should no such agreement materialise, we shall be entitled to set the prices unilaterally at
our discretion. 4. Where value added tax is not included in our invoice - particularly because
notification by the Customer suggests an “intracommunity” delivery pursuant to §, 4 No. 1 b
in conjunction with § 6 a of the German VAT law (UstG) and because we shall be subject to
subsequent VAT (§ 6 a, IV of the German VAT law - UStG) - the Customer shall be obliged
to pay us the sum we shall be charged in this context. This obligation shall stand regardless
of whether we are subsequently required to pay value added tax, turnover tax on imports or
any comparable taxes domestically or abroad.
§ 5 Lead Time, Delivery Periods, Delays, Neglect of Duty and Acts of God
1. In the absence of any contractual agreements to the contrary, agreed delivery deadlines
shall be deemed as observed when, by this time, the delivery item left our works, was
handed over to the forwarding agent at our works or was indicated ready for dispatch to the
Customer. 2. Where fulfilment of the order depends on documents and permits being furnished or essential questions being clarified by the Customer, any delivery deadline consented
to or agreed upon by us shall only remain binding once the Customer has clarified the said
question or furnished the said documents or permits by the start of the 10th week prior to
the delivery deadline. What documents and clarifications are to be furnished in the context
of this stipulation shall depend on the separate provisions of both Parties to the Contract or
shall result from the nature of the Contract. 3. In the absence of agreements to the contrary,
delivery periods shall commence once the order confirmation has been sent. 4. Delivery
periods shall, however, not commence until the Customer has furnished the required documents and permits and has clarified those questions essential for the implementation of
the Contract. What documents and permits are to be furnished and what questions are to
be clarified by the Customer shall be determined by the individual contractual agreements
made by the Parties or by the nature of the Contract itself. 5. Observance of the delivery
period shall depend on the Customer fulfilling his agreed advance payment obligations.
Beyond this, the delivery period shall likewise commence on fulfilment of those contractual
obligations of the Customer which are laid down separately with reference to this provision
in each individual contract or which result from the nature of the Contract. Furthermore, the
delivery period shall only commence subsequent to the full and faultless fulfilment of all
those contractual obligations of the Customer which are essential and necessary for the
performance of our obligation. 6. Should we accept a request for a change to the contractual
services expressed by the Customer subsequent to concluding the Contract, those delivery
periods and deadlines agreed upon shall become non-binding. We shall make every effort
to indicate to the Customer new delivery, commissioning and acceptance deadlines for the
goods he has ordered as swiftly as possible. We shall, however, be entitled to give priority
consideration to other obligations when finding new deadlines in this context. 7. In the event
of delays in delivery as laid down in the above-mentioned provisions, a new delivery and/or
assembly date shall only be binding subject to written consent by us or an authorised member of our staff. The same shall apply in cases where the date has become non-binding due
to legal regulations. 8. Delivery periods shall extend appropriately or the delivery date shall
be postponed by a reasonable period due to circumstances prompted by industrial action,
in particular strikes or lock-outs, or due to the advent of unforeseen hindrances beyond our
volition such as breakdowns, energy or raw material shortages, traffic disruption, energy
supply problems, measures taken on the part of the authorities, sovereign interventions
or orders in so far as those hindrances are proven to have a significant influence on the
completion or delivery of the items. This shall also apply where such circumstances have
effected upstream suppliers. The same shall apply for hindrances caused by Acts of God.
Likewise, we cannot be held responsible for the circumstances described above where they
occur during an already existent delay. Should the disruption last for over 3 months, each
Party to the Contract shall be entitled to withdraw from that hitherto unfulfilled section of the
Contract in writing within a period of 2 weeks without recourse to claims for compensation.
Should withdrawal arise, the outlay for work already carried out incl. material must be reimbursed. At the request of either Party to the Contract, the respective other Party must declare
whether he wishes to adhere to the Contract once the 3-month delay period has expired. We
shall be obliged to notify the Customer in writing of any delay at the earliest possible convenience. The same shall apply when the delay ceases to apply. 9. We always reserve the
right to honour our delivery obligations subject to the correct and timely delivery of our own
supplies. 10. In the event of us being responsible for a transgression or failure to observe
the delivery periods, the Customer shall be entitled to cancel the Contract in accordance with
legal provisions, subsequent to his setting us a deadline of at least 2 weeks in writing and
this deadline also expiring without being met. He may cancel without setting any deadline
where the conditions laid down in § 323, Section 2 of the German Civil Code (BGB) are met.
Declarations of cancellation or refusal and the fixing of final deadlines can only be made in
writing. 11. In the event of neglect of duty on our part however, we shall only be obliged to
compensate for damages where premeditation or gross negligence can be ascribed to us or
one of our vicarious agents employed. This shall not apply in the case of a firm deal. Legal
provisions concerning the burden of proof shall remain unaffected by this.
§ 6 On-Demand Delivery
1. We can dispatch orders as part deliveries insofar as these remain within those customary in the trade and are reasonable to the Customer. These part deliveries must each
be paid for separately in accordance with our terms of payment. Once we have effected
part delivery, the Customer shall be entitled to assert his rights arising from § 5, Nos.
10 and 11 of these General Terms of Business, also in terms of the entire Contract,
should the conditions laid down therein prevail and the Customer have no interest in
part delivery. 2. Should delivery on demand be agreed upon, we shall be entitled to
cancel the Contract and/or claim for damages instead of demanding payment where the
Customer delays in demanding delivery and we have set an appropriate deadline to no
avail. Claims for damages shall not be permitted should the Customer not be responsible for the delay. Our claim for compensation due to delay pursuant to § 280, Section 1,
Section 2 of the German Civil Code BGB in conjunction with § 286 of the German Civil
Code (BGB) shall remain unaffected by this. Alternatively in this case, we shall be entitled to
demand the agreed purchase price for preparation of the entire delivery. 3. Goods ordered
for delivery on demand must be requested in full within no more than 3 months subsequent
to order confirmation where no other deadline has been agreed.
§ 7 Passing of Risk and Transport
1. In the absence of other separate agreements to the contrary, delivery shall be effected ex
works at 87772 Pfaffenhausen. This shall also apply for part deliveries. 2. Where the goods
are sent to the Customer at his request or as agreed, the risk of accidental loss/destruction
and accidental deterioration shall pass (insofar as this is legally permitted) to the Customer
as soon as the goods leave our works - also in the case of part deliveries. This shall apply
regardless of whether the goods are dispatched from the place of fulfilment or from another
location and regardless of who bears the freight costs or who transported the goods to the
Customer or to a forwarding agent. 3. Where those goods to be dispatched to the Customer or collected by the Customer pursuant to the above provision are surrendered to the
forwarding agent or the Customer at the works, the risk shall then pass to the Customer
to the extent described above. 4. In the absence of other agreements to the contrary, we
shall determine the means of transport and the transport route chosen here without there
being any onus on us to select the fastest and cheapest option here. Where the Customer
so wishes we shall insure the consignment against damage incurred during transit, storage
and assembly on behalf and at the cost of the Customer. Where the Customer’s place of
business is both place of performance and place of effect as a result of an explicit agreement, we shall be entitled to insure the consignment against damage incurred during transit,
storage and assembly on behalf and at the cost of the Customer. 5. Where the goods are
transported by third parties and where the goods remain uninsured, particularly at the explicit
request of the Customer, these goods shall be transported at the Customer’s own risk. 6.
Insofar as we bear the transport risk pursuant to the above provisions, the Customer shall
be obliged to facilitate the settlement of claims with insurance companies for us to the best
of his endeavours. More specifically, the Customer must satisfy himself of the condition of
the consignment immediately on its arrival and must have any possible damage in transit
assessed forthwith by the relevant body (station of arrival, delivery post office, forwarding
agent) and must relay this information to us without delay. Where the insurance company
effects reduced payment to us due to insufficient involvement of the Customer in assessing
the damage and in settling the claim, we shall be entitled to charge the Customer the insurance company’s shortfall in payment. 7. Where the goods are ready for dispatch and where
their dispatch or acceptance is delayed for reasons for which we are not responsible, the
risk shall pass to the Customer on receipt of notification announcing the goods’ readiness for
dispatch. The same shall apply where the goods are not called up for delivery within the set
period in the case of delivery on call.
§ 8 Acceptance
1. The Customer must take acceptance of delivered items – even those which are defective.
Where he refuses to do so indicating the alleged defects, he shall not be entitled to derive
claims for damages from his inability to use the said goods. He shall also bear the risk of
further deterioration in this respect. His rights in the event of defects shall remain unaffected
by this. Acceptance of the delivered items shall not be subject here to an acceptance of
goods pursuant to § 640 of the German Civil Code - BGB). 2. Where delivered items
are taken into operation without any reservations, this shall be deemed as an acceptance
regardless of whether consignments or other services, in particular assembly, are yet to be
effected by us. 3. In case of our exceptional voluntary agreement given in advance and in
writing without implying any acceptance of a statutory duty, to partially or completely accept
goods returned to us, the following applies: Only goods returned in a faultless technical and
optical condition coming in their original packing, in complete packing units, and without any
missing items, will be accepted by us. The original Bill of Delivery must be included in the
return shipment, which has to be sent by the purchaser to us free of postage and handling.
After corresponding receipt of the goods, the customer then receives a goods credit note
less the costs of putting back into storage, which depend on the value of the goods returned.
In the case of a goods value of < 300 € the fee for putting back into storage is 30 %, 20 %
for a goods value of > 300 € to < 600 €; 15 % for a goods value > 600 € to <1,000 €; 10 %
from a goods value of > 1,000 €.
§ 9 Terms of Payment
1. Our invoices are payable with a 2 % discount within 10 days of the invoice date or 30 days
net, departing from the net value of the goods (as per payment received date). 2. We shall
2016
539
General terms of sale
only accept means of payment going beyond cash or transfers to those accounts indicated
on the invoices for the sake of fulfilling the Contract – this shall particularly apply in the case
of bills of exchange or cheques. All payments must be effected free of charge to us. Bank,
discount and collection charges shall be borne by the Customer. Payment by bill of exchange
shall be subject to prior agreement. Discount on payments by bill of exchange shall not be
granted. The surrender of bills of exchange and cheques as such shall not be considered
as settlement of outstanding accounts. 3. In the event of culpable default on payment subsequent to the due date we can, without the need for any reminders, demand interest of 8
percentage points above the current base interest rate from the Customer as a contractual
penalty. Where we are in a position to prove greater delay-related damage, we shall be
entitled to assert this claim. As soon as those pre-conditions required to lodge a claim for
compensation prevail, our claims shall be regulated in accordance with § 11 of these General
Terms of Business. 4. The Customer shall neither be entitled to withhold any payments
nor to set off any payment obligations in the event of counter claims being disputed, not
recognised by us or not legally enforceable. 5. Where the Customer defaults on payment
for more than 10 days, where bills of exchange or cheques are not honoured punctually or
where a substantial deterioration of the purchaser’s financial circumstances should come to
our attention (regardless of whether this occurred prior or subsequent to conclusion of the
Contract), we shall have the option of demanding either a) advance payment on all those
services not yet provided (including bills receivable) or b) the provision of collateral in respect
of these claims. For such time as these claims remain unfulfilled we shall not be obliged to
effect further deliveries arising from current contracts. 6. Each part delivery shall be considered a separate transaction. 7. Part payments are subject to special written agreement.
§ 10 Retention of Title
1. We shall retain title of ownership on the delivered items until such time as the Customer
has paid all claims arising from his business relationship with us (extended retention of title to
ownership). Thus, this retention of title on the delivered items also safeguards claims lodged
against the Customer arising from contracts not relating to the delivered items. The Customer shall secure ownership by way of security for us. 2. Where the extended retention of
title to ownership has not become part of the Contract due to the Customer having conflicting
General Terms of Business, delivery based upon ordinary retention of title can be used as an
alternative. 3. The Customer may only sell the delivered items in ordinary business transactions where he is not in default of payment and where he has not suspended payments. In
such cases resale shall not be permitted. 4. On concluding the purchase contract with us the
Customer shall, by way of collateral, already assign to us the claims he would be entitled to
against his buyer on the basis of the sale or any other legal reason with respect to the subject
of the Contract along with all secondary rights, at an amount corresponding to the percentage value of the subject of our Contract. The Customer shall be entitled to collect the claim
as long as he does not default on his payments to us or has not suspended payments generally. 5. The Customer must immediately inform us in writing of any attachments, seizures
or other dispositions by third parties on the item subject to retention of title and enclose all
relevant documents (fieri feci etc.). Where a third party is unable to reimburse us the judicial
and extra-judicial costs of an action pursuant to § 771 of the German Code of Civil Procedure
(ZPO), the Customer shall be held liable to cover this shortfall incurred by us. 6. We can
demand that the Customer makes notification of the assignment to his buyers and that he
furnishes us with all information and documents necessary to collect the assigned claims.
7. Where those Customer’s claims - arising from resale of the goods subject to our retention
of title or from the resale of goods of which we are co-owners - are incorporated into a current
account, the Customer must immediately assign his payment claim to us to the value of the
current and recognised balance – i.e. to the amount of our claims against the Customer. 8.
The Customer shall be obliged, for as long as title is retained, to treat the goods with care
and to keep them in proper condition. Any necessary repairs must be performed immediately
by us – with the exception of emergencies – at the Customer’s cost. We shall bear the cost
of these repairs where we are obliged to provide services in lieu or remedy defects as part
of the provisions laid down in these General Terms of Business relating to warranties. 9.
We shall be entitled, at the Customer’s cost, to sufficiently insure - to reinstatement value those goods subject to retention of title against theft and damage of all kinds, in particular
fire or water damage where the Customer fails to prove he has taken insurance cover of this
kind. 10. Where the realisable value of that collateral to which we are entitled shall exceed
by more than 15 % the claims to be safeguarded arising from this business relationship, we
shall be obliged, upon the Customer’s request, to release the collateral in this respect. The
choice of collateral to be released shall fall to us. 11. The processing and transformation of
the delivered items by the Customer shall always be performed for us. Where the delivered
items are processed along with items not belonging to us we shall acquire co-ownership of
the new item corresponding to the value of the delivered item in relation to the other items
processed at the time of processing. The items arising from processing shall be subject to
the same provisions as the items delivered subject to retention of title. 12. Where the goods
subject to retention of title are connected to a plot of land of which the goods form an essential part, the Customer shall be obliged to allow us to view this plot of land and have access
to it and shall be obliged to assign to us his claims in respect of the owners of the land or to
grant other collateral securities of equal value should he be the owner of the land himself.
Should a substantial deterioration of the financial circumstances of the Customer occur we
shall be entitled, with the consent of the owner of the land or the landlord, to step into the
legal position of the Customer vis-à-vis the former. 13. The assertion of our claims arising
from ownership by way of security shall not mean cancellation of the Contract.
§ 11 Delay of the Customer
1. Where the Customer fails to accept the goods on the agreed delivery deadline or once
the delivery period has come to an end, due to circumstances for which he is responsible,
we can demand compensation for the additional expenses we have incurred as a result. 2.
In the event of default by the Customer we shall be entitled, regardless of the possibility of
asserting a greater claim for actual damage, to demand interest on the sum for which the
Customer is in default at 8 percentage points above the current base interest rate. 3. Where
we are entitled to claim damages instead of performance we can, regardless of the possibility of asserting a greater claim for actual damage, demand 15 % of our price as damages
provided the Customer fails to prove that there was no damage caused at all or damage is
considerably lower than the lumpsum compensation.
§ 12 Claims for Defects
1. Where defective goods exist for which we are responsible we shall be entitled to either
remedy the defect or to effect subsequent deliveries. Any replaced component shall transfer to our ownership. 2. The assertion of claims for defects by the commercial Customer
shall be dependent on the latter having fulfilled his due obligations in terms of examining
the goods and giving notice of any defects pursuant to § 377 of the German Commercial
Code (HGB). Other entrepreneurs must notify us within 14 days of receiving the goods of
visible defects otherwise the Customer’s right to make claims for defects shall be for-feited.
Any notification of defects must be made in writing detailing the specific defect involved. 3.
We can refuse to remedy the defects for such time as the Customer has failed to fulfil all
his payment obligations, with the exception of a sum corresponding to the price reduction
on the defective goods. In this case, the Customer shall only be obliged to effect advance
payment where we have confirmed our liability for defects within the ambit of these General
Terms of Business to him in writing. 4. We must be given the opportunity to inspect the
notified defects on the spot. This inspection must be performed by us without delay where
the Customer is interested in immediate settlement of the matter. Claims for defects shall not
be permitted where merely insignificant deviations from the properties of the goods or where
merely an insignificant impairment of the serviceability of the goods shall prevail. 5. We can
demand from the Customer those additional costs incurred for the purpose of subsequent
fulfilment of obligations - in particular transport costs, tolls, work and material costs - where
the outlay is increased as a result of transferring the goods to be delivered to location other
than the delivery address, unless transfer occurs in accordance with the usage set out in the
540
2016
Contract. 6. Claims under the right of recourse on the part of the Customer in the case of
the purchase of consumer goods (§ 478 of the German Civil Code - BGB) shall be excluded
in this respect when relating to agreements made by the Customer with his buyer going
beyond the legal claims for defects of that buyer. The Customer must inform us in good time
of any claims for defects lodged by his buyer so that we are in a position to meet the claims
of the buyer instead of the Customer if we so wish. 7. Where our contractual obligations also
include assembly of the items to be delivered, an acceptance certificate must be produced
once assembly has been completed to be signed by the Customer. This must record any
defects the Customer has become aware of or that have become apparent by this time.
Where these defects are not recorded our services shall be deemed accepted free from
defects in this respect. 8. Services rendered in lieu and remedied defects shall be subject to
the same warranty provisions governing the item originally delivered. 9. Claims for defects
shall become statute-barred 1 year after the passing of the risk unless we are found to have
caused the defect due to gross negligence or with pre-meditation or to have concealed the
defect with an intent to deceive. This shall apply for any guarantees issued by us or binding
to us in the absence of other agreements to the contrary. The statutory time-limits for claims
lodged under the right of recourse pursuant to § 478 of the German Civil Code (BGB) shall
remain unaffected by this. The same shall apply for longer statutory time limitations, for the
construction of buildings or for the delivery of goods used for a building in accordance with
their normal purpose that have caused the building’s defectiveness. These time limitations
shall also apply for consequential damage where the claims are not asserted here based
upon an illegal act. Where a defective delivery shall make defect remediation necessary,
the time limitation shall only be suspended for such time as defects have been remedied
and shall not be reinstated again. 10. Before the Customer can assert any further claims
or rights (cancellation, price reductions, compensation or reimbursement of expenses) we
shall have the opportunity to be set an appropriate deadline in which to remedy the defect
where we have not issued any guarantee worded to the contrary. Where we fail to remedy
the defect despite at least two attempts, where we refuse to remedy the defect or where this
remediation is not possible or not reasonable to the Customer, the Customer shall be entitled
to cancel the Contract or to lower (reduce) remuneration. § 13 of these terms shall apply for
the assertion of claims for compensation or reimbursement of expenses. 11. The following
shall also apply in the event of claims based upon deficiencies in title: In the absence of
provisions to the contrary we shall merely be obliged to effect delivery in the country of the
delivery address unaffected by third party rights. In the event of us being responsible for violating third party copyrights we shall be entitled to either acquire at our own expense a right
of exploitation sufficient for the agreed or precluded use and make this over to the Customer,
to change the delivered goods in such a way as to ensure the copyright is not violated or to
exchange the delivered goods insofar as the agreed and precluded use is not compromised.
Where we are unable to do this, where we refuse to remedy the defect or where this fails,
the Customer shall be entitled to lodge legal claims and assert his rights. § 13 of these terms
shall apply for the assertion of claims for compensation or reimbursement of expenses. 12.
Where the Customer chooses to cancel the Contract on the basis of deficiencies in title or a
quality defect subsequent to a failure to remedy these, he shall also forfeit his right to claim
for compensation for the defect. Where the Customer chooses to claim damages subsequent to a failure to remedy defects, the goods shall remain at the Customer’s premises
insofar as this is reasonable to him. Compensation shall be limited to the difference between
the price to the Customer and the value of the defective goods. This shall not apply where
we have caused the contractual violation with an intent to deceive. 13. Where a selection of
samples is sent out to the Customer for inspection, we shall only be responsible for ensuring
the delivery is effected in accordance with the sample selection taking any adjustments into
account. 14. Where the Customer receives erroneous assembly instructions, we shall merely
be obliged to deliver assembly instructions free from errors and indeed only at all when the
error in the assembly instructions is at variance with proper assembly.
§ 13 Compensation/Reimbursement of Expenses
1. The assertion of claims for compensation or reimbursement of expenses (hereinafter
referred to as “compensation”) based upon defects in the delivered goods (warranty claims)
shall be ruled out where we are unable to remedy the defect for reasons for which we are
not responsible. The assertion of claims for compensation for consequential harm caused
by a defect or consequential damages based upon a consignment of goods found defective
shall – as a rule - depend on our being at fault with intent, gross negligence or negligent
neglect of duty of legal significance in the absence of another provision to the contrary. The
same shall apply for the assertion of claims for compensation for a violation of a service life
warranty granted by or on behalf of us (§ 443, Section 2 of the German Civil Code - BGB). 2.
Otherwise, claims for compensation and claims for reimbursement of expenses (“claims for
compensation”) on the Customer’s part shall be ruled out irrespective of the legal grounds for
this - in particular those lodged on the basis of neglect of duty arising from and in connection
with the obligatory relation, those arising from culpa in contrahendo and those arising from
offences. This shall not apply for claims pursuant to § 1 and § 4 of the Product Liability Law,
in the case of premeditation or gross negligence, injury to life, body or health, due to the
taking over of a guarantee on the existence of a property (guarantee on the nature of the
goods) or in the case of our neglect of duty that is negligent and legally significant. Under
no condition shall we be liable beyond the legal claims. Where we are liable for negligence
our liability shall be limited to foreseeable and typical damage. Changes to the burden of
proof shall not be connected to these provisions in Sections 1 and 2. 3. Where our liability is
ruled out or limited this shall also apply for the personal liability of our salaried employees,
blue-collar staff, contract staff, representatives and vicarious agents. 4. Statutory limitation of
claims between the Supplier and the Customer shall be governed by § 12, Section 9 insofar
as claims relating to product liability pursuant to § 823 et seq. of the German Civil Code
(BGB) or the Product Liability Law are not affected by this. This statutory limitation shall also
particularly apply in the case of consequential damage. 5. We shall assume no liability for
damage caused by unsuitable or improper use, defective commissioning or assembly carried
out by the Customer himself, natural wear and tear, defective or negligent treatment – in
particular through excessive use, unsuitable operating resources, replacement materials,
defective construction work, unsuitable ground for building, chemical, electrochemical or
electrical influences and improper modifications or maintenance performed without our
approval. 6. We shall not be responsible for issuing any special public permits required or for
the observance of any pollution protection laws. This shall not apply where the observance
of these laws or the provision of special public permits have been agreed upon by us on an
individual contractual basis.
§ 14 Court of Jurisdiction and Place of Fulfilment
1. The place of fulfilment for all contractual obligations shall be 87772 Pfaffenhausen.
2. Where the Customer is a merchant, a legal entity under public law or a special public
fund, we shall be entitled to make the court of jurisdiction for all litigation arising from this
contractual relationship alternatively Memmingen, the Customer’s place of business or – in
the case of foreign deliveries – the capital of the country where the Customer has his place
of business. The same shall apply where the domicile or place of habitual residence of the
Customer at the time the action commences is not known. This shall also apply for litigation
arising from bills of exchange and cheques. 3. Legal relationships between the Customer
and ourselves shall be subject only to the law of the Federal Republic of Germany excluding
the UN convention on the international sale of goods.
§ 15 Others
1. We process your personal data for the execution of your order and to provide you
with the latest news about our range of products. You may object to the processing and
use of your data for advertising purposes at any time (e-mail to marketing@raico.de).
Notes
2016
541
Pictures and diagrams, measurements, and technical
data in this catalogue have been used for illustrating
purposes, and are thus not binding. We reserve the
right to make changes to reflect technical advancements.
We accept no responsibility for mistakes regarding
contents, typographical errors nor misprints which
might have occured during producing this catalogue.
No part of this publication may be reproduced, stored
in a retrieval system or transmitted in any form without
our prior permission in writing. All deliveries are
subject to our Terms of Sales and Supply.
No. 002400, Release 2016-03
542
2016
RAICO Austria
Zentrale
Telefon
+49 8265 911 0
Telefax
+49 8265 911 100
E-Mail
info@raico.at
www.raico.at
RAICO Swiss GmbH
Delfterstrasse 10
5000 Aarau
Telefon
+41 62 738 66 00
Telefax
+41 62 738 66 01
E-Mail
info@raico.ch
www.raico.ch
RAICO France S.à.r.l.
8a rue Icare
67960 Entzheim
RAICO UK
Unit 63 Gosport Business Centre
Aerodrome Road
Gosport, PO13 0FQ
Phone
+44 1329 848 175
Fax
+44 1329 848 701
E-Mail
info@raico.org.uk
www.raico.eu
RAICO East GmbH
ul. Bolschaia Spasskaya 12
Offi ce 8
129090 Moscow
Phone
+7 495 9951159
Fax
+7 495 9951159
E-Mail
info@raico.ru
www.raico.ru
Téléphone +33 3 88784894
Téléfax
+33 3 88782107
E-Mail
info@raico.fr
www.raico.fr
No. 002400 – Release 03/2016; Cover photo: Haus der Bauern – Freiburg, DE
RAICO Bautechnik GmbH
Gewerbegebiet Nord 2
87772 Pfaffenhausen
Telefon
+49 8265 911 0
Telefax
+49 8265 911 100
E-Mail
info@raico.de
www.raico.de
Descargar