Atos spa Table G800-10/E 21018 Sesto Calende, Italy - Fax 0331 920005 Electronic accessories 1 CONTROL LEVERS TYPE E-TLP The control levers type E-TLP are compact units in a sealed case with a high accuracy potentiometer actuated by a lever and electrically connected to the outside through a standard sealed connector. They are available with mechanical and/or electrical safety, further with microswitches for possible contacts or auxiliary safety. E-TLP – 2 – * / – / ** control levers Design number potentiometer resistance: 2 = 2 KΩ lever position and control features: 0 = free lever without centering springs 1 = lever with center return by means of springs (range ± 30°) 2 = lever with return in external position by means of a sping (range 0 to 60°) 3 = lever with center return by means of a spring (range 0 to 30°) 2 Options: – = basic version S = mechanical safety C = with one microswitch 2C = with two microswitches TECHNICAL CHARACTERISTICS OF CONTROL LEVERS TYPE E-TLP CONTACTS CHARACTERISTICS Voltage (V) Max current with resistive load (A) Max current with inductive load (A) (ϕ = 0,4) 125 AC 250 AC 30 DC 115 DC 5 3 5 0,4 3 2 3 0,05 Electric life ≥ 1.000.000 cycles Mechanical life ≥ 10.000.000 cycles Insulation resistance ≥ 100 MΩ Contact resistance ∼ 15 MΩ Microswitch options = option /S mechanical safety Dimensions in mm LEVER LEVER POSITION TYPE mechanical angle electric angle E-TLP-2-0/C E-TLP-2-1/C 0±30° 0±15° E-TLP-2-0/2C E-TLP-2-1/2C 0±30° 0±15° E-TLP-2-2/C 60° 230° E-TLP-2-2/2C 60° 230° E-TLP-2-3/C 30° 115° E-TLP-2-3/2C 30° 115° 0 G800 3 MECHANICAL BEARING FRAMES FOR ELECTRONIC CARDS IN EUROCARD FORMAT Mechanical bearing frames for rear mounting (only for single card) or for front mounting (for single card or set of cards) are available for electronic cards in Eurocard format (100x160). 3.1 Mechanical bearing frames for rear mounting E-K – E-K = bearing frame for single card 32M 32M = rear panel fastening with 32 pins connector and terminal board for connections These frames allow an easy mounting and connections of single cards in Eurocard format; they are realized in anti-flame material (VDE 0209) and they have a 32 pins connector DIN 41612 form D with gold-plated contacts and terminal board for connections; a device for card locking is also fitted-in. Only for single card mounting. For mounting the card insert and push it to the end; for pulling out the card keep lift the light brown lock. E-K-32M 3.2 Mechanical bearing frames for front mounting according to DIN41494 E-RACK3HE E-RACK3HE = mechanical frame for sets of cards; height 3HE – 35TE **TE = standarized modular dimensions in the range between 7TE and 84TE See table below for available versions and relevant dimensions These frames are composed by a container with front panel fastening in conductive aluminium alloy (except the mounting angulars which are anodized) with standardized modular dimensions according to the following units of measure: HE = unit of height (1 HE = 44,45 mm) TE = unit of width (1 TE = 5,08 mm) The widths of Atos electronic cards are multiple of 7 TE (35,3 mm); the height is 3HE (128,4 mm). The posterior connectors must be ordered separately, with card guides included, by specifying in the order the code and the number of “slots” foreseen for the frame: Code of the slot E-7TE Width 7TE Coupled connector E-K-32P Connector characteristics: E-K-32P = 32 pins to solder, DIN 41612 form D; Wiring and placing of cards in the mechanical frame are at user’s care. Dimension A Dimension B Dimension C 91,8 73,9 51,6 127,4 109,5 87,2 163 145,1 122,8 E-RACK3HE28TE 198,5 180,6 158,3 E-RACK3HE35TE 234,1 216,2 193,9 E-RACK3HE42TE 269,6 251,7 229,4 E-RACK3HE49TE 305,2 287,3 265 E-RACK3HE56TE 340,8 322,9 300,6 E-RACK3HE63TE 376,3 358,4 336,1 E-RACK3HE70TE 411,9 394 371,7 E-RACK3HE77TE 447,4 429,5 407,2 E-RACK3HE84TE 483 465,1 442,8 E-RACK3HE7TE E-RACK3HE14TE E-RACK3HE21TE Mechanical frames of the rack have not EMC shielding characteristics. The containers can be shielded by means of covers, front panels and additional combined components at user’s care. CONNECTOR E-K-32P 11/01 BEARING FRAME E-RACK3HE E-K-32P to be ordered separately