Horizontal Pump 10/8 M CURVE SHOWS APPROXIMATE PERFORMANCE FOR CLEAR WATER (International Test Standard ISO9906:1999 - Grade 2 unless otherwise specified). For media other than water, corrections must be made for density, viscosity and/or other effects of solids. WEIR MINERALS reserves the right to change pump performance and/or delete impellers without notice. Frame suitability must be checked for each duty and drive arrangement. Not 90 THIS PUMP IS KNOWN AS 200M IN USA ONLY. 80 70 1100 rpm 55% 40% 50% 60 900 rpm 60% Hr NPS EFFIC IENCY 50 40 Impeller Vanes Vane ø Type Part No F8056 4 549mm Open Material Metal Seal 800 rpm 30 203mm 254mm Frame (Rating - KW) E 120 EE 225 F 260 R 300 FF 425 FFX 425 60% 1000 rpm Head, H (m) 55% Pump Discharge Suction Gland Sealed Pump 4.5m 7.5m 700 rpm Liner Polymer Metal 6m 20 (Norm Max r/min) 920 1100 Min Passage Size 65mm 10 50 100 150 200 250 Flow Rate, Q (L/s) 300 350 400 450 Curve Revision 1 Revision © 4/2023 Notes Weir Minerals Australia (PTC) SPHERE NOTE CHANGED & CENTRIFUGAL NOTE DELETED. GENERAL NOTES REVISED. TYPICAL PUMP PERFORMANCE Reference ESY4192/1 CURVE Issued Jun 85 WPA108B02/1
