separations-processes-solutionspdf compress

Solutions Manual for
Separation Process Engineering
Includes Mass Transfer Analysis
Third Edition
Phillip C. Wankat
Upper Saddle River, NJ • Boston • Indianapolis • San Francisco
New York • Toronto • Montreal • London • Munich • Paris • Madrid
Capetown • Sydney • Tokyo • Singapore • Mexico City
The author and publisher have taken care in the preparation of this book, but make no
expressed or implied warranty of any kind and assume no responsibility for errors or
omissions No liability is assumed for incidental or consequential damages in connection
with or arising out of the use of the information or programs contained herein.
Visit us on the Web: InformIT.com/ph
Copyright © 2012 Pearson Education, Inc.
This work is protected by United States copyright laws and is provided solely for the use
of instructors in teaching their courses and assessing student learning. Dissemination or
sale of any part of this work (including on the World Wide Web) will destroy the
integrity of the work and is not permitted. The work and materials from it should never
be made available to students except by instructors using the accompanying text in their
classes. All recipients of this work are expected to abide by these restrictions and to
honor the intended pedagogical purposes and the needs of other instructors who rely on
these materials.
ISBN-10:
0-13-276211-0
ISBN-13: 978-0-13-276211-3
SOLUTIONS MANUAL
for
SEPARATION PROCESS ENGINEERING
Third Edition
(Formerly published as Equilibrium-Staged Separations)
by
Phillip C. Wankat
Introduction to Solutions Manual
The material in this Solutions Manual represents my best efforts at solving all the problems in
Separation Process Engineering, Third Edition. Note that the answers for graphical solutions can
vary depending upon the accuracy of the draftsperson; however, the methods shown here should
be correct. Although every effort has been made to ensure that solutions are correct, there will be
errors. Please inform the author of errors (wankat@purdue.edu).
The assistance of Mrs. Karen Heide in preparing this Solutions Manual is gratefully
acknowledged.
This Solutions Manual is provided as a service to professors who adopt the book
Separation Process Engineering, Third Edition, in their courses. It is copyrighted and is not to be
distributed or sold. No parts of this manual should be placed on the Internet without explicit
written consent from the author. Learning requires practice and feedback, not mere copying.
Unfortunately, there are students and other people who do not realize that students do not learn if
they copy solutions from a solutions manual. Some of these people are willing to put illegal
copies of solution manuals on the Internet either for profit or for free. These illegal copies reduce
student learning and make it more difficult for professors to teach courses. To aid everyone
involved in teaching and learning separation processes, please help protect the integrity of the
Solutions Manual.
—Phillip C. Wankat
2
TABLE OF CONTENTS
SAMPLE: Course Syllabus in Separation Process Engineering
p. 4
EXAMPLE Schedule A: Equilibrium Staged Plus Membranes with Computer Labs
p. 10
EXAMPLE Schedule B: Classical Equilibrium Staged Course with Computer Lab
p. 12
EXAMPLE Schedule C: Vapor-Liquid Separations Course with Computer Lab
p.13
EXAMPLE Schedule D: Equilibrium Staged Separations Plus Adsorption, Ion Exchange &
Chromatography with Computer Lab*
p. 14
*Assumes students know Fickian Diffusion & Mass Transfer
EXAMPLE Schedule E: Classical Equilibrium Stage Course Without Computer Lab
p. 15
EXAMPLE Schedule F: Mass Transfer & Diffusion Plus Mass Transfer Analysis of Distillation,
Absorption, Membrane & Sorption Separations*
p.16
*Assumes students have had an Equilibrium-Staged Separations Course
SOLUTIONS TO PROBLEMS:
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Chapter 5
Chapter 6
Chapter 7
Chapter 8
Chapter 9
Chapter 10
Chapter 11
Chapter 12
Chapter 13
Chapter 14
Chapter 15
Chapter 16
Chapter 17
Chapter 18
p. 17
p. 18
p. 56
p. 70
p. 125
p. 145
p. 155
p. 173
p. 218
p. 253
p. 277
p. 287
p. 319
p. 363
p. 386
p. 395
p. 418
p. 445
3
SAMPLE COURSE SYLLABUS
CHE 306 DESIGN SEPARATION PROCESSES
COURSE SYLLABUS
INSTRUCTOR:
Professor Phillip C. Wankat
E-mail: wankat@purdue.edu (I usually answer quickly between 8 am and
5:30 pm. Use e-mail to communicate with Prof. Wankat for help.)
Office Hours: MWF 10:30-11:50 A.M. These times are reserved for 306 students.
On Wednesdays I will be in the computer lab from 1:30 to 3:20 P.M.
Other times by appointment only. (You are unlikely to find me if you drop
in at a time other than office hours without an appointment.)
TA's – Office hours will be M 2:30 to 3:30, T 1:00 to 3:00 and W 1:00 to 2:30 (starting second
week of semester).
Prerequisites: Must have passed Mass & Energy Balances and Thermodynamics
TEXTBOOK:
P.C. Wankat, Separation Process Engineering, Third Edition (formerly
published as of Equilibrium Staged Separation Processes), Prentice Hall,
2011.
Goals:
By the end of CHE 306 you should be able to:
1. Design flash distillation by hand and computer calculations;
2. Design distillation systems by hand and computer calculations;
3. Design absorbers and strippers by hand and computer calculations;
4. Design extraction systems by hand and computer calculations;
5. Design membrane separation systems.
Importance: Separations constitute 50 to 90% of the cost (capital and operating) of chemical
plants. Distillation is the most important separation method in the chemical and petroleum
industries. Separations are one of the key items which delineate chemical engineering from the
other engineering disciplines.
Course
Structure:
The basic course outline is:
1. Introductory Material
2. Flash Distillation
3. Binary Distillation
4. Multicomponent Distillation
5. Complex Distillation
6. Batch Distillation
7. Distillation Design
8. Absorption, Stripping, & Extraction
9. Extraction
10. Membrane separations
(1 week)
(1 week)
(2 weeks)
(2 weeks)
(2 weeks)
(1 week)
(1 week)
(2 weeks)
(1 week)
(2 weeks)
The detailed course outline is attached.
The typical weekly schedule will be:
4
Monday, Wednesday and Friday: 2 Lectures plus optional help.
Wednesday/Thursday:
Computer Lab when scheduled
Since the schedule will sometimes deviate from this pattern, follow your detailed course outline.
Suggested
Study
Procedure:
Read book before class. Come to class prepared. There will be
short quizzes to encourage preparation. New material
will be presented in class as needed. Material in the book that is a review
or is easy to understand will not be lectured on. Ask questions if the book
is not clear. After class, reread the book. Make extensive notes on or in the
book. Before each exam summarize your notes on one page, and then
reduce to 3x5 card (double-sided) you can take into the exam.
The suggested way to do homework: First, work on all problems by
yourself. Then, meet with your study group to check answers and to
complete solution of more difficult problems. Ask for help once these
other efforts have failed. Finally, prepare your own solution to hand in if
the homework will be graded. It is important to solve a lot of problems
including homework that is not handed in.
You should spend 9 to 12 hours (including class & lab time) on this course
every week. If you are spending less, work more problems both
individually and in your study group.
Quizzes:
To encourage students to prepare for and attend class, there will be a series
of 10 short quizzes, which are 9% of the course grade. The lowest grade
will not count, which is equivalent to one free absence. After that an
absence will be a zero. Students who turn in a quiz with their name on it
and who stay the entire period and pay attention will automatically earn
50%. There will be no quiz make-ups and no taking quizzes late (Part of
the 50% for attendance is being on time—if you want this credit make
attendance a high priority. In other words, an interview at Purdue is NOT
a valid excuse for missing a quiz.) Missing 2 quizzes for plant trips will
cost 1% of the course grade—a small penalty. Writing another student’s
name on a quiz and turning it in for a grade will be treated as a form of
cheating. Graded quizzes will be passed out in labs or will be available
from the TA.
Homework:
There will be 8 homework assignments which are handed in. Students who
solve all of the problems are very likely to see their efforts rewarded by
higher test scores. The homework that is handed in will be 6% of the
course grade. The professor and TAs will grade one problem selected by
the professor and one problem selected by the student—write the problem
you want graded on the top of the assignment. Graded homework
assignments will be passed out in labs or will be available from the TA.
Work in groups on homework is encouraged. Turn in your own solution
(not Xerox copy), but please list names of group members on it.
Exams:
Arrange your schedule to be available for the night exams on Sept. 30 and
Nov. 4. The third exam, which is not a cumulative final exam, will be
5
during finals. Exams (including the lab test) are 70% of the course grade.
Your lowest exam will be 10% and the other three exams will count as
20% each. Exams (except the lab test) are closed book, but students will
be allowed and encouraged to have one 3 x 5 card (double-sided) with
information on it. All electronic devices (other than a calculator) must be
turned off and be buried in your back pack. Use of these devices will be
considered to be cheating. Graded exams will be passed out in labs or will
be available from the TA.
DO NOT MAKE TRAVEL PLANS UNTIL YOU KNOW THE FINALS SCHEDULE
Make-Up Exam:
Students are strongly urged to make attendance at exams a very high
personal priority and make appropriate arrangements to be present at all
exams. If an exam is missed students may choose to make it their lowest
exam grade and receive a zero for 10% of their course grade.
Alternatively, a single comprehensive make-up exam (available only for
students who miss a test) will be administered during finals period (after
Exam 3). This will be the only make-up exam available. In cases of
extreme duress (e.g., hospitalization) talk to Prof. Wankat for other
arrangements.
Computer Lab:
Computer labs are scheduled for Wednesdays and Thursdays. If you want
to switch lab sections see the lab coordinator during the first week of
classes to see if this is possible. Work in lab will initially be done
individually and later in the semester in assigned 3- or 4-person groups.
Feel free to help other students and to ask for help during lab. Laboratory
will use the ASPEN Plus simulation package. Most of the lab assignments
are in your textbook; thus, you will need to bring your textbook to lab.
The laboratory (not including the lab test) will be 15% of the course grade.
Attendance & attention in computer lab is required, and will be 6% of the
course grade. There will be a limited opportunity to do lab in advance or
make-up a missed laboratory, but without help from the TA (arrange with
your TA to show you have done the lab work). Because seating is limited,
students must attend their scheduled laboratory period unless arrangements
are made in advance to attend a lab session that has open seats. Group lab
reports are required for two labs. Lab groups are expected to help each
other for the two labs that require lab reports. Only questions from the
entire group will be answered by the TA or professor for laboratory help.
Lab reports will be limited to two pages of text plus one page of figures
and tables. The two lab reports and the mastery lab quiz each count 3.0%
of the course grade.
There will be a lab test worth 20% of course on November 12th and 13th
during your regularly scheduled lab hours. Work will be done
individually. The lab test will be open book and open notes. The use of e6
mail, the Internet, or old computer files will not be allowed during the lab
test. Plan on being present.
Summary
of Grading:
Quizzes
9%
(1/2 attendance & attention)
Graded Homework
6%
Exam 1 to 3 plus lab test 70% (lowest grade is 10% others are 20%
each).
Lab Grade (attendance, lab reports & lab quiz) 15% (6% attendance)
Extra Credit
0%
Grading Scale:
The class will vote if they want to use the traditional A, B, C, D scale or
switch to the +/- scale. The entire class must be graded on the same scale.
Guaranteed Grade Scale for A, B, C, D scale:
90-100
A
80-90
B
70-80
C
60-70
D
Guaranteed Grade Scale for +/- scale:
Grade
A+,A
A)
B+
B
B)
C+
C
C)
D+
D
D)
F
GPA(Value
Recommended(Range
4.0
93)100
3.7
90.0,),92.9
3.3
87.0,),89.9
3.0
83.0,),86.9
2.7
80.0,),82.9
2.3
77.0,),79.9
2.0
73.0,–,76.9
1.7
70.0,–,72.9
1.3
67.0,–,69.9
1.0
63.0,–,66.9
0.7,–,becomes,
60.0,–,62.9
lowest,passing,
grade,
0.0
<,60.0
,
,
For both scales slightly lower cut off scores may be used at the discretion of the instructor.
Lectures:
According to University regulations, it is the responsibility of students to
attend all class sessions and to make up any material that is missed. To aid
7
students, one of the TAs will take notes of every lecture. These notes will
be placed in reserve in the Potter Library.
Note: There is abundant evidence that students who regularly attend
lectures tend to earn higher grades.
Optional Help
The Professor or a TA will hold a help session during the regularly
scheduled class (9:30 to 10:20 a.m.) one day most weeks on Monday,
Wednesday or Friday (see detailed course outline). The Wednesday class
on the day of the two night exams will be an optional help session.
Additional help sessions can be arranged before tests if students request
them. In addition the professor and the TAs will have office hours that you
are strongly encouraged to use. Since office hours are traditionally not
heavily used early in the semester, this is a good time to get into the habit
of attending office hours. Also, feel free to discuss questions with your
laboratory instructor during laboratory.
Feedback to
Prof. Wankat
With a very large class it is essentially impossible for a professor to know
each student and to be aware of the difficulties they are having in learning
the course material. To provide feedback to Prof. Wankat a group of student
representatives will be constituted with one representative from each
laboratory section. This group will meet with Prof. Wankat once per week to
provide anonymous feedback from all the students in the course.
Professional
Behavior:
Students in CHE 306 are continuing on a program of study to become
chemical engineers. Engineers are expected to uphold the code of ethics,
which includes “Being Honest,” “Engineers shall build their professional
reputations on the merits of their services,” and “Engineers shall act in
such a manner as to uphold and enhance the honor, integrity, and dignity
of the engineering profession.” Students in CHE 306 will be expected to
behave in an ethical and professional manner.
This includes: 1. Honesty on quizzes, exams, and lab test. Cell phones,
pagers, personal computers, MP3 players, personal
digital assistants (e.g., Palm Pilots), & similar
electronic devices must be off and not in sight—no
phone calls, text messaging or use of storage available
in the electronic device. Alphanumerical data or
programs are not allowed in calculators. The use of
head phones is not allowed. Note: Since you will be
allowed the use of a 3x5 card, there is no reason to try
and beat the system.
2. No plagiarism or copying.
3. Claim credit for homework/laboratory only if you were
involved in the solution. [Do NOT turn in a copy that
you do not understand.] This is common sense—not
cheating. Students who copy homework (strictly
speaking this is legal, but stupid) will do poorly on
8
exams and receive low grades because of this.
4. No disruption of class. Because cell phones are
disruptive, please turn cell phones off before lectures or
lab. In addition, since many students report that when
students talk to neighbors during lecture it is disruptive,
please do not do it.
5. Make a concerted, diligent effort to learn.
9
EXAMPLE Schedule A: Equilibrium Staged Plus Membranes
with Computer Labs
Skip Chapter 11, 15, 16 and 18
Note: Classes are loaded towards beginning of the semester.
ChE 306, Fall 2009
Reading
1
2
3
8/24
M
8/26
W
26&27 W/Th
4
5
6
8/28
8/31
9/05
7
8
2&3
9/4
9/7
9
10
11
12
13
14
15
9/9
W
9&10 W/Th
9/11
F
9/14
M
9/16
W
16&17 W/Th
9/18
F
16
17
18
19
20
21
22
23
24
25
26
Introduction & Overview Separations
Chapt. 1
Phase equil./Flash Dist./Aspen Plus
Chapt. 2
Lab 1 Intro Aspen Plus/Flash Dist. Appendix C2
Bring textbook to all labs except lab test.
F
Quiz 1 (Phase Equilibrium/Flash). Lecture: Flash Dist. Chapt. 2
M
Binary & MultiComponent Flash distillation
Chapt. 2
W
Quiz 2 (Binary Flash, Closed book, can have 3x5 card).
Start distillation.
Chapt. 3
W/Th Lab 2 (FRNY 1022) Flash Dist.
Appendix Chapt 2, Lab 2
F
Distillation McCabe-Thiele
Chapt. 4
M
Labor Day – No class and no office hours
HW 1 due. Lecture: McCabe-Thiele
Chapt. 4
Lab 3. Distillation.
Appendix Chapter 4, Lab 3.
Quiz 3 (McCabe-Thiele – open book). McCabe-Thiele C4
McCabe-Thiele
Chapt. 4
McCabe-Thiele & column design
Chapt. 10
Lab 4. Distillation design. App. C6, do lab 4, and, if time, start lab 5.
HW 2 due. Quiz 4 (McCabe-Thiele, 3x5 card)
M.C. distillation profiles/calculations
Chapt. 5
9/21
M
Optional Help
9/23
W
M.C. Distillation – Short-cut
Chapt. 7
23&24 W/Th Mastery lab quiz – counts same as lab report. Finish lab 5 App C6.
9/25
F
Quiz 5 (M.C. Distillation, 3x5 card).
M.C. Distillation – Matrix Solutions
Chapt. 6
9/28
M
HW 3 due. Finish M.C. Dist. Review homework
Chapt. 6
9/30
W
Optional Class – Help Session
9/30
W
Night Exam, Lilly 1105, Scheduled for 6:30 to 7:30.
(a 3x5 card with information is allowed; otherwise, closed book and closed notes)
9/30 &10/01 W/Th No Lab
10/02 F
Review Exam. Start complex distillation
Chapt. 8
10/05 M
Complex distillation
Chapt. 8
10/07 W
Quiz 6 (Complex distillation, open book)
Complex distillation
Chapt. 8
7&8
W/Th Lab 6 Complex distillation, App. C8, lab 7 or lab 8
NOTE: Some years I do lab 6 in App. C8 or assign as a group HW.
10/9
F
No class & no office hours
10/12 M
October Break – No class and no office hours
10/14 W
Optional Help on HW 4 (Run by TAs)
Oct 14/15 W/Th Lab 7 Extractive distillation, in lab groups (Report Due 10/22 or
10/23 in lab) App. C8, lab 9, pp. 273-275
NOTE: In 2009 lab 10, App. C10 did not yet exist. I would add this lab.
10/16 F
HW 4 due. Absorption & stripping
Chapt. 12
10
27
28
29
10/19 M
10/21 W
21&22 W/Th
Absorption & Stripping
Chapt. 12
Quiz 7. Absorp. & Stripping, Start Extraction
Chapts. 12 &13
Lab 8 Absorption & Stripping (Report Due 10/29 or 10/30 in lab)
App. C12, lab 11, pp. 421-423
30
10/23 F
HW 5 due. Start extraction
Chapt. 13
10/26 M
Optional help
31
10/28 W
Extraction
Chapt. 13
32
28&29 W/Th Lab 9 Extraction,
App. C14, lab 12, pp. 499-500
33
10/30 F
Quiz 8 (Extraction, 3x5 card). Extension McCabe-Thiele Chapt. 14
34
11/02 M
HW 6 due. Review HW. Finish McCabe-Thiele
Chapt. 14
11/04 W
Optional Help
35
11/04 W
Night Exam 2, Lilly 1105, Scheduled for 6:30 to 7:30.
(a 3x5 card with information is allowed; otherwise, closed book and closed notes)
11/04 & 11/05 W/Th No Lab
36
11/06 F
Review exam.
11/09 M
No class – AIChE National
11/11 W
No class – AIChE National
NOTE: Purdue’s semester has 44 class periods plus the exam in Finals. The no class and optional help
periods are included to comply with university regulations.
11/12 W/Th No lab
37
11/13 F
Optional help with TAs
38
11/16 M
Batch distillation
Chapt 9
39
11/18 W
Batch distillation
Chapt. 9
40* Nov 18&19 W/Th Lab Exam* (FRNY 1022)
11/20 F
Batch Distillation Quiz 9 (batch dist, open book)
Chapt.9
11/23 M
No class
Thanksgiving Vacation
41
11/30 M
HW 7 due. Start Membrane Separations
Chapt. 17
42
12/02 W
Membrane separations. Quiz 10 (Membranes, open book). Chapt. 17
Dec 2&3 W/Th
No Lab
43
12/04 F
Membrane separations.
Chapt. 17
12/07 M
Optional help
12/9
W
Optional help
Dec 9&10 W/Th No lab
44
12/11 F
HW 8 due. Membranes– Solution to HW 8. Review for exam
Saturday 12/19 EE 129
EXAM 3. Not cumulative, covers batch distillation & membrane
separations. A 3x5 card with information is allowed; otherwise, closed book/closed notes.
MAKE TRAVEL PLANS AFTER THE FINALS SCHEDULE IS AVAILABLE!
FINALS
*
TBA – Makeup Exam for exam 1, 2, or 3 (Cumulative)
Do NOT schedule any conflicts with lab test on Nov 18 and 19.
Readings are in Separation Process Engineering.
In#the#event#of#a#major#campus#emergency,#course#requirements,#deadlines#and#grading#
percentages#are#subject#to#changes#that#may#be#necessitated#by#a#revised#semester#calendar#
or#other#circumstances.##Go#to#Blackboard#to#get#information#about#changes#in#this#course.
11
EXAMPLE Schedule B: Classical Equilibrium Staged Course
with Computer Lab
Class
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
FINALS
Skip Chapters 15, 16, 17, 18
Subject
Reading:
Introduction. Phase Equilibrium
Chapt. 1
Phase Equilibrium, Start Flash
Chapt. 2
Flash – Binary & Multicomponent
Chapt. 2
Flash – Binary & Multicomponent
Chapt. 2
Lab 1 Intro to Aspen Plus. Lab 1, App. C2
Flash – MultiComponent and Aspen Plus
Chapt. 2
Binary Distillation
Chapt. 3
Lab 2 – Flash Distillation. Lab 2, App C2
McCabe-Thiele
Chapt. 4
McCabe-Thiele
Chapt. 4
Lab 3– Binary Distillation. Lab 3, App C4
McCabe-Thiele
Profiles & Intro. M. C. Distillation
Chapt. 5
Lab 4 – M. C. Distillation. Lab 4, App C6
EXAM #1.
Review Test & M. C. Dist. Mass Balances
Chapt. 5
Lab 5 - M.C. Distillation. Lab 5, App C6
M. C. Distillation
Chapt. 6
Short Cut Distillation
Chapt. 7
Lab 6 – Complex Distillation, Lab 7, App C8
Complex Distillation
Chapt. 8
Complex Distillation
Chapt. 8
Lab 7 -Complex Distillation, Lab 8, App C8
Complex Distillation
Chapt. 8
Complex Distillation
Chapt. 8
Lab 8. Extractive Distillation, Lab 9, App C8
Staged Col. Design.
Chapt. 10
Packed Cols, Distl. Costs. Energy Conservation Chapts. 10 & 11
Lab 9. Tray Rating, Lab 10, App C10
Exam review
EXAM #2
Review Exam
Absorption & Stripping
Chapt. 12
Absorption & Stripping
Chapt. 12
Lab 10 – Absorption/Stripping; Lab 11, App C12
Immiscible Extraction
Chapt. 13
Miscible Extraction
Chapt. 13
Lab 11 – Extraction; Lab 12, App C13
Miscible Extraction
Chapt. 13
Extension McCabe-Thiele
Chapt. 14
Lab Test
Batch Distillation
Chapt. 9
Batch Distillation
Chapt. 9
Exam Review
EXAM #3
12
EXAMPLE Schedule C: Vapor-Liquid Separations Course
with Computer Lab
Class
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
FINALS
Skip Chapters 13, 14, part 16, 17, 18
Subject
Reading:
Introduction. Phase Equilibrium
Chapt. 1
Phase Equilibrium, Start Flash
Chapt. 2
Flash – Binary & Multicomponent
Chapt. 2
Flash – Binary & Multicomponent
Chapt. 2
Lab 1 Intro to Aspen Plus. Lab 1, App. C2
Flash – MultiComponent and Aspen Plus
Chapt. 2
Binary Distillation
Chapt. 3
Lab 2 – Flash Distillation. Lab 2, App C2
McCabe-Thiele
Chapt. 4
McCabe-Thiele
Chapt. 4
Lab 3– Binary Distillation. Lab 3, App C4
McCabe-Thiele
Profiles & Intro. M. C. Distillation
Chapt. 5
Lab 4 – M. C. Distillation. Lab 4, App C6
EXAM #1.
Review Test & M. C. Dist. Mass Balances
Chapt. 5
Lab 5 - M.C. Distillation. Lab 5, App C6
M. C. Distillation
Chapt. 6
Short Cut Distillation
Chapt. 7
Lab 6 – Complex Distillation, Lab 7, App C8
Complex Distillation
Chapt. 8
Complex Distillation
Chapt. 8
Lab 7 -Complex Distillation, Lab 8, App C8
Complex Distillation
Chapt. 8
Complex Distillation
Chapt. 8
Lab 8. Extractive Distillation, Lab 9, App C8
Staged Col. Design.
Chapt. 10
Packed Cols, Distl. Costs. Energy Conservation Chapts. 10 & 11
Lab 9. Tray Rating, Lab 10, App C10
Exam review
EXAM #2
Review Exam
Absorption & Stripping
Chapt. 12
Absorption & Stripping
Chapt. 12
Lab 10 – Absorption/Stripping; Lab 11, App C12
Mass Transfer Review Fickian Diffusion & Mass Transfer Coef. C. 15
Maxwell-Stefan Diffusion & Mass Transfer
Chapter 15
Lab 11 – Lab Test
Maxwell-Stefan Diffusion & Mass Transfer
Chapter 15
Rate-Based Design of Distillation
Chapter 16
Lab 12 – Rate-Based Design of Distillation, Lab 13, App C16
Batch Distillation
Chapt. 9
Batch Distillation
Chapt. 9
Exam Review
EXAM #3
13
EXAMPLE Schedule D: Equilibrium Staged Separations Plus Adsorption,
Ion Exchange & Chromatography with Computer Lab*
*Assumes students know Fickian Diffusion & Mass Transfer
Class
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
FINALS
Skip Chapters 11, 15, 16, 17
Subject
Reading:
Introduction. Overview separations
Chapt. 1
Phase Equil. & Flash Dist.
Chapt. 2
Flash Distillation, Aspen Plus
Chapt. 2
Lab 1 Aspen Plus & Flash Distillation; Lab 1, App. C2
Flash –
Chapt. 2
Flash
Chapt 2
Lab 2 – Flash Distillation; Lab 2, App. C2
Intro Binary Distillation
Chapt. 3
Binary Distillation & AspenPlus
Chapt. 4
Lab 3 – Binary Distillation; Lab 3, App. C4
McCabe-Thiele
Chapt. 4
McCabe-Thiele
Chapt. 4
McCabe-Thiele & exam review
Chapt. 4
EXAM 1
Review Test. MC Profiles
Chapt. 5
M. C. Distillation
Chapt. 6
Lab 4 – M. C. Distillation; Lab 4, App. C6
M. C. Distillation, Matrix solutions
Chapt. 6
MC Distillation, Short-Cut,
Chapt. 7
Lab 5 – M. C. distillation; Lab 5, App. C6
Complex Distillation
Chapt. 8
Complex Distillation
Chapt. 8
Lab 6 – Complex Distillation; Lab 7 or Lab 8, App. C8
Complex Distillation
Chapt. 8
Complex Distillation
Chapt. 8
Lab 7 – Extractive Distillation; Lab 9, App C8
Staged Column Design
Chapt. 10
Packed Column Design & Dist. Costs
Chapts. 10 & 11
Lab 8 – Tray Sizing; Lab 10, App C10
Review for Exam
Exam 2
Absorption
Chapt. 12
Absorption & Stripping
Chapt. 12
Lab 8, Absorption/ Stripping; Lab 11, App C12
Immiscible extraction
Chapt. 13
Miscible extraction
Chapt. 13
Lab 9, Extraction; Lab 12, App. C13
Adsorption, Fundamentals & Equilibrium
Chapt. 18
Adsorption – solute movement
Chapt. 18
Adsorption & chromatography –solute movement Chapt. 18
Adsorption & chromatography –solute movement Chapt. 18
Ion exchange – equilibrium & solute movement Chapt. 18
Intro to mass transfer effects & zone broadening Chapt. 18
REVIEW for Exam
EXAM #3
14
Schedule E. Classical Equilibrium Stage Course Without Computer Lab
Skip Labs in Appendices & Skip Chapters 17 & 18.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
FINALS
Introduction. Phase Equilibrium
Phase Equilibrium, Start Flash
Flash – Binary & Multicomponent
Flash Multicomponent
Flash Multicomponent
Flash – Drum Design
Intro. To Binary Distillation
McCabe-Thiele
McCabe-Thiele
McCabe-Thiele
McCabe-Thiele
Profiles & Intro. M. C. Distillation
Stage-by-Stage MC Calculation
Stage-by-Stage MC Calculation
Exam Review
EXAM #1.
Review Test & M. C. Dist. Mass Balances
M. C. Distillation
MC Distillation
Short Cut Distillation
Complex Distillation
Complex Distillation
Complex Distillation
Complex Distillation
Staged Col Design
Staged Col. Design.
Packed Cols,
Distl. Costs. Energy Conservation
Column Sequencing
Exam review
EXAM #2
Review Exam
Batch Distillation
Batch Distillation
Batch Distillation
Absorption & Stripping
Absorption & Stripping
Absorption & Stripping
Immiscible Extraction
Immiscible & Partially Miscible Extraction
Partially Miscible Extraction
Partially Miscible Extraction
Washing & Leaching
Exam Review
EXAM #3
Chapt. 1
Chapt. 2
Chapt. 2
Chapt. 2
Chapt. 2
Chapt. 3
Chapt. 4
Chapt. 4
Chapt. 4
Chapt. 5
Chapt. 5
Chapt. 5
Chapt. 6
Chapt. 6
Chapt. 6
Chapt. 7
Chapt. 8
Chapt. 8
Chapt. 8
Chapt. 8
Chapt. 10
Chapt. 10
Chapt. 10
Chapt. 11
Chapt. 11
Chapt. 9
Chapt. 9
Chapt. 9
Chapt. 12
Chapt. 12
Chapt. 12
Chapt. 13
Chapt. 13
Chapt. 13
Chapt. 13
Chapt. 14
15
Schedule F. Mass Transfer & Diffusion Plus Mass Transfer Analysis of
Distillation, Absorption, Membrane & Sorption Separations*
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
FINALS
*Assumes students have had an Equilibrium-Staged Separations Course
Skip: Chapters 1, 2 (except equilibrium), Chapters 3-14
Introduction. Molecular Basis of Diffusion
Section 15.1
Binary Fickian Diffusion
Section 15.2
Binary Steady State Diffusion without convection
Section 15.2
Binary Steady State Diffusion with convection
Section 15.2
Binary Steady State Diffusion with convection
Section 15.2
Binary Fickian Gas Diffusivities
Section 15.3
Binary Fickian Liquid Diffusivities
Section 15.3
Linear Driving Force Model
Section 15.4
Mass Transfer Coefficient Correlations
Section 15.5
Mass Transfer Coefficient Correlations
Section 15.5
Distillation HTU-NTU calculations
Section 16.1
Distillation HTU & HETP
Sections 16.1 & 16.2
Packed Tower Correlations & Start Absorbers
Sections 16.3 & 16.4
Absorbers & Strippers
Sections 16.4 & 16.5
Review for Exam
EXAM 1
Go over exam; Binary Distillation Tray Efficiency
Section 16.6
Limitations Fickian Diffusion & Murphree Efficiencies
Start Maxwell-Stefan Analysis
Sections 15.6 & 15.7
Maxwell-Stefan Analysis
Section 15.7
Maxwell-Stefan Analysis
Section 15.7
Maxwell-Stefan Analysis
Section 15.7
Maxwell-Stefan Analysis
Section 15.7
Rate-Based Analysis of Distillation
Section 16.8
Review of Tray Design
Chapt 10 & Lab 10
Aspen Plus Rate-Based Assignment
Lab 13, App C16
Start Membrane Separations
Sections 17.1 &17.2
Gas Permeation
Section 17.3
Gas Permeation
Section 17.3
Review for Exam
Exam 2
Go over exam; Flow patterns in gas permeation
Section 17.7
Reverse Osmosis
Section 17.4
Reverse Osmosis
Section 17.4
Ultrafiltration
Section 17.5
Start Adsorption
Section 18.1
Linear Solute Movement Analysis
Section 18.2
Linear Solute Movement Analysis
Sections 18.2 & 18.3
Linear & Nonlinear Solute Movement Analysis
Sections 18.3 & 18.4
Nonlinear Analysis
Section 18.4
Ion Exchange
Section 18.5
Mass & Energy Transfer
Section 18.6
Solutions for Linear Systems
Section 18.7
LUB Analysis
Section 18.8
Review for Exam
Exam 3
16
SPE 3rd Edition Solutions Manual Chapter 1
New Problems and new solutions are listed as new immediately after the solution number. These new
problems in chapter 1 are: 1A3, 1A4, 1B2-1B4, 1D1.
A2.
Answers are in the text.
A3.
New problem for 3rd edition. Answer is d.
B1.
Everything except some food products has undergone some separation operations. Even the
water in bottles has been purified (either by reverse osmosis or by distillation).
B2.
New problem for 3rd edition. Many homes have a water softener (ion exchange), or a filter, or a
carbon water “filter” (actually adsorption), or a reverse osmosis system.
B3.
New problem for 3rd edition. For example: the lungs are a gas permeation system, the intestines
and kidney are liquid permeation or dialysis systems.
B4.
New problem for 3rd edition. You probably used some of the following: chromatography,
crystallization, distillation, extraction, filtration and ultrafiltration.
D1.
New problem for 3rd edition. Basis 1kmol feed.
.4 kmole E = (.4 )(MW = 46 ) = 18.4 kg
.6 kmol Water = .6 (MW = 18 ) =
10.8 kg
total = 29.2 kg
Weight fraction ethanol = 18.4/29.2 = 0.630
Flow rate = (1500 kmol/hr)[(29.2kg)/(1 kmol)] = 43,800 kg/hr.
17
SPE 3rd Edition Solution Manual Chapter 2.
New Problems and new solutions are listed as new immediately after the solution number. These new
problems are: 2A6, 2A9 to 2A16, 2C4, 2C8, 2C9, 2D1.g, 2.D4, 2D10, 2D13, 2D24 to 2D30, 2E1, 2F4,
2G4 to 2G6, 2H1 to 2H3.
2.A1.
Feed to flash drum is a liquid at high pressure. At this pressure its enthalpy can be calculated
as a liquid. eg. h TF,Phigh
c p LIQ TF
Tref . When pressure is dropped the mixture is above
its bubble point and is a two-phase mixture (It “flashes”). In the flash mixture enthalpy is unchanged but temperature changes. Feed location cannot be found from T F and z on the
graph because equilibrium data is at a lower pressure on the graph used for this calculation.
2.A2.
Yes.
2.A4.
1.0
Equilibrium
(pure water)
yw
zw = 0.965
Flash
operating
line
.5
2.A4
0
0
.5
xw
1.0
2.A6. New Problem. In a flash drum separating a multicomponent mixture, raising the pressure will:
i. Decrease the drum diameter and decrease the relative volatilities.
Answer is i.
2.A8.
a. K increases as T increases
b. K decreases as P increases
c. K stays same as mole fraction changes (T, p constant)
-Assumption is no concentration effect in DePriester charts
d. K decreases as molecular weight increases
2.A9.
New Problem. The answer is 0.22
2.A10.
New Problem. The answer is b.
2.A11.
New Problem. The answer is c.
18
2.A12.
New Problem. The answer is b.
2.A13.
New Problem. The answer is c.
2.A14.
New Problem. The answer is a.
2.A15.
New Problem. a.
b. The answer is
The answer is
36ºC
3.5 to 3.6
2.A16. New Problem. The liquid is superheated when the pressure drops, and the energy comes from the
amount of superheat.
2.B1.
Must be sure you don’t violate Gibbs phase rule for intensive variables in equilibrium.
Examples:
F, z, Tdrum , Pdrum
F, h F , z, p
F, TF , z, p
F, z, y, Pdrum
F, TF , z, y
F, h F , z, y
F, z, x, p drum
F, TF , z, x
etc.
F, z, y, p drum
F, TF , z, Tdrum , p drum
F, z, x, Tdrum
F, TF , y, p
Drum dimensions, z, Fdrum , p drum
F, TF , y, Tdrum
Drum dimensions, z, y, p drum
F, TF , x, p
etc.
F, TF , x, Tdrum
F, TF , y, x
2.B2.
This is essentially the same problem (disguised) as problem 2-D1c and e but with an existing
(larger) drum and a higher flow rate.
With y = 0.58, x = 0.20, and V/F = 0.25 which corresponds to 2-D1c.
lb mole
If F 1000
, D .98 and L
2.95 ft from Problem 2-D1e .
hr
Since D α V and for constant V/F, V α F, we have D α F .
With F = 25,000:
Fnew Fold = 5, Dnew = 5 Dold = 4.90, and Lnew = 3 Dnew = 14.7 .
Existing drum is too small.
2
2
Fexisting
D exist
4
2
Feed rate drum can handle: F α D .
gives
1000
.98
.98
Fexisting 16,660 lbmol/h
Alternatives
a) Do drums in parallel. Add a second drum which can handle remaining 8340 lbmol/h.
b) Bypass with liquid mixing
19
y = .58,
V = .25 (16660) = 4150
16,660
25,000
LTotal
x
8340
Since x is not specified, use bypass. This produces less vapor.
c) Look at Eq. (2-62), which becomes
V MWv
D
3K drum 3600
L
v
v
Bypass reduces V
c1)
Kdrum is already 0.35. Perhaps small improvements can be made with a better demister
→ Talk to the manufacturers.
c2) ρv can be increased by increasing pressure. Thus operate at higher pressure. Note this
will change the equilibrium data and raise temperature. Thus a complete new
calculation needs to be done.
d) Try bypass with vapor mixing.
e) Other alternatives are possible.
2.C2.
2.C5.
a. Start with
V
zA
zB
F
KB 1
KA 1
xi
Fz i
L VK i
Fz i
xi
Then y i
From
Kixi
yi
and let V
L
L
F
xi
F L Ki
F L
or x i
zi
L
F
1
L
Ki
F
K i zi
L
1
Ki
F
0 we obtain
K i 1 zi
L
F
L
1
Ki
F
0
20
zi
2.C7.
1
V/F
f
0
0
.1
-.09
1 f
Ki 1
V
F
.2
-.1
.3
-.09
V
F
From data in Example 2-2 obtain:
.4
.5
-.06 -.007
.6
.07
.7
.16
.8
.3
.9
.49
1.0
.77
2.C8. New Problem.
p drum
F=L+V
Tdrum
Fz
y
x
Lx Vy
Solve for L & V
Or use lever arm-rule
z
21
2.C9.
New Problem. Derivation of Eqs. (2-62) and (2-63). Overall and component mass balances are,
F
V L1
Fzi
L2
L1x i,L1
L2
x i,L2
Vyi
Substituting in equilibrium Eqs. (2-60b) and 2-60c)
Fz i
L1K i,L1
L2
x i,L2
L 2 x i,L2
VK iV
L2
x i,L2
Solving,
x i,L 2
Fz i
L1K i,L 2
Fz i
L2
VK i,V
L1K i,L1
L2
F V L1
L2
VK i,V
L2
Dividing numerator and denominator by F and collecting terms.
zi
L
1 1
F
x i,liq 2
1
Since
yi
K i,V
L2
L2
C
Stoichiometric equations,
i 1
K i,L1
x i,L 2
i 1
K i,L1
L2
L2
1
K i,L1
L2
C
1,
i 1
K i,V
C
which becomes
K i,V
K i,V L 2 zi
L
1 1
Ki,V
F
x i,L2 , y i
1
Since x i,liq1
K i,L1
L2
yi
2.D1.
a.
V
x i,liq1
0.4 100
Slope op. line
See graph. y
b.
V
40 and L
K i,V
1
F V
600 and L
1
V
F
C
L2
C
yi
i 1
x i,L 2
K i,L1
L2
L
1 1
F
0
0
V
1
F
(2-62)
K i,L1 L 2 z i
L
K i,L1 L 2 1 1
K i,V
F
K i,L1 L 2 1 z i
C
i 1
L2
1 zi
L
1 1
F
K i,V
L2
L2
1
V
1
F
V
F
(2-63)
60 kmol/h
L V
3 2, y x
0.77 and x 0.48
0.4 1500
c. Plot x
0
V
F
i 1
x i,liq 2 , we have x i,liq1
x i,liq 2
1
1 , thus,
1
In addition,
L2
z
0.6
900 . Rest same as part a.
0.2 on equil. Diagram and y
V F z 1.2 0.25 . From equil y
d. Plot x 0.45 on equilibrium curve.
x
z
0.3. yint ercept
zF V 1.2
0.58 .
22
L
Slope
Plot operating line, y
e. Find Liquid Density.
MW L
Then, VL
xm
V
z at z
x
x m MWm
MWm
F V
xw
MWw
.2
w
L
v
RT
.2 32.04
32.04
.7914
MW L VL
P MW
v
.8
4
V
V F
.2
0.51 . From mass balance F 37.5 kmol/h.
x w MWw
m
Find Vapor Density.
1 V F
.8
.8 18.01
18.01
1.00
1 atm 26.15 g/mol
22.51 ml/mol
20.82 22.51 0.925 g/ml
(Need temperature of the drum)
MW v y m MW m y w MW w .58 32.04 .42 18.01
Find Temperature of the Drum T:
From Table 3-3 find T corresponding to
y .58, x 20, T=81.7 C 354.7K
v
20.82
82.0575
ml atm
mol K
354.7 K
26.15 g/mol
8.98 10
4
g/ml
Find Permissible velocity:
23
u perm
K drum
L
K drum
v
exp A
v
B
nFlv
V
Since V
Wv
L
F V
1000 250
15615
WV
L
6537.5
V MW v
A cs
u perm 3600
Thus, D
MW L
nFlv
lb
E
nFlv
20.82
15, 615 lb/h,
4
0.0744, and n Flv
v
14.19 3600 8.98 10
4A cs
2.598
4
4
14.19 ft/s
250 26.15 454 g/lb
4
2-60
4
6537.5 lb / h
lbmol
.925
8.98 10
3
250 lbmol/h,
750
8.89 10
.925 8.98 10
.442
D
250 26.15
L
V
2
0.25 1000
V MW v
WL
.442, and u perm
nFlv
F
F
750 lbmol/h, and WL
Flv
Then K drum
C
g/ml 28316.85 ml/ft
3
2.28 ft 2 .
1.705 ft. Use 2 ft diameter.
L ranges from 3 D 6 ft to 5 D=10 ft
Note that this design is conservative if a demister is used.
f. Plot T vs x from Table 3-3. When T 77 C, x 0.34, y 0.69. This problem is now
very similar to 3-D1c. Can calculate V/F from mass balance, Fz Lx Vy. This is
V z y
0.4 0.34
Fz
F V x Vy or
0.17
F y x 0.69 0.34
g. Part g is a new problem. V = 16.18 mol/h, L = 33.82, y= 0.892, x = 0.756.
2-D2.
Work backwards. Starting with x 2, find y2 = 0.62 from equilibrium. From equilibrium point
V
plot op. line of slope
This gives
L V 2
1
V F 2
3 7.
F 2
z2
0.51 x1 (see Figure). Then from equilibrium, y1
For stage 1,
2.D3.
0.4
z1
x1
0.55 0.51
F
y1
x1
0.78 0.51
V F 0.6
V
L
y
x z V F
V
Op. eq.
2
y
x 2 3
3
See graph: y 0.55 x M 0.18
a.
z
V
0.78 .
0.148 .
6.0 k mol h, L
4.0
T ~ 82.8 C linear interpretation on Table 2-7 .
24
b. Product
78.0 C
x
Mass Bal: Fz
or
0.30,
y
Lx Vy
4.0
0.665,
F V x Vy
10 V 0.3 0.665V
V 2.985 and V F
Can also calculate V/F from slope.
c.
V
F 10,
y
If y
F
L
V
x
0.3
V
z
7
V F
z
0.8, x
Then z
3&L
x
0.2985
7
z
0.3
0.545 @ equil
0.3 0.8
7
0.545
0.6215.
3
7
Can also draw line of slope
through equil point.
3
25
2.D4. New problem in 3rd edition. Highest temperature is dew point
Set
zi
yi .
Ki
K ref TNew
If pick C4 as reference: First guess
yi
yi K i
1.0
K ref TOld
K bu tan e
.2
.35
yi K i
1.0,
41 C : K C3
T
yi
.2
.35
.45
Ki
8.8
4.0145
.9
4.0145 .6099
yi
.2
.35
.45
Ki
6
2.45
.44
K C4,NEW
3.1,
K C6
0.125
.45
4.0145 T too low
K i 3.1 1.0 .125
Guess for reference
K C4 4.014
T 118 C : K C3 8.8,
K C4,NEW
0
yi x i
xi
Want
V F
2.45 1.2
.2
.35
.45
Ki
6.9
2.94
.56
.9
0.6099
2.45, T
85 : K C2
6.0,
K C6
0.44
1.20
2.94, T
yi
K C6
0.804
96 C : K C3
6.9,
K C6
0.56
Gives 84 C
26
Use 90.5º → Avg last two T
yi K i
2.D5.
K C4
2.7, K C3
.2
.35
.45
6.5
2.7
.49
6.5, K C6
0.49
1.079
T ~ 87 88º C
Note: hexane probably better choice as reference.
a)
v1 = F2
v2
y1 = z2
z1 = 0.55
y2
1
2
F1 = 1000
V
F
L
y1
V1
V1
V1
z Plot 1st Op line.
V
0.45454 & L1
V1
F1
1000
V1 = 687.5 kmol/h = F2
V
c) Stage 2
At x
F
0, y
0.25 ,
z V F
From graph y 2
V2
V
F
F2
y1 = 0.66 = z2
y = x = z = 0.55
to x1 = 0.3 on eq. curve (see graph)
0.55 0.80
.25
0.454545
.55 0
.55
L
Slope
L1
F
x1
0.25
2
x2
x1 = 0.30
b)
p1,2 = 1 atm
L
V
687.5
F
1000
1
0.75F
3, y x
V
0.25F
0.66
2.64. At y 0, x 2
0.25
0.82, x 2
0.25 687.5
0.6875
0.66. Plot op line
z2
F
L
z
z
0.66
L F
0.75
0.88
0.63 .
171.875 kmol/h
2
27
2.D6.
V
F = 1.0 kmol/min
T = 50ºC
P = 200 kPa
zc4 = 0.45
zc5 = 0.35
Zc6 = 0.20
K i 1 zi
1
0 , First guess V/F = 0.6
Ki 1 V F
1.4 .45
0.2 .35
0.7 .2
1 1.4 .6 1 0.2 0.6
Use Newtonian Convergence
1 0.7 0.6
d V F
F
i 1
V
k 1
Fk
0.0215
2
K i 1 zi
c
df k
V
Kc6 = 0.30
L
RR eq.,
f1
Kc4 = 2.4
Kc5 = 0.80
1
Ki 1 V F
2
fk
df
d V F
28
df1
V
d
F
V
F2
f2
1.4 2 0.45
0.2
2
1 1.4 .6
0215
0.6
2
0.35
1 0.2 0.6
0.7
2
2
0.20
1 0.7 0.6
2
0.570
0.6377
0.570
1.4 .45
0.2 .35
0.7 0.2
0.00028
1 1.4 0.6377 1 0.2 0.6377 1 0.7 0.6377
Which is close enough.
yi K i x i
zi
0.45
x c4
0.2377,
V 1 1.4 .6377
yc4
2.4 0.2377
1 Ki 1
F
0.35
x c5
0.4012, y c5
0.8 0.4012 0.3210
1 0.2 0.6377
x c6
2.D7.
0.20
1 0.7 0.6377
xi
V
zA
zB
F
KB 1
KA 1
KM
5.6 and K P
1.0002
0.3
0.7
F
0.21 1
5.6 1
zM
0.30 0.4012
yi
0.9998
0.3
xP
1 xM
0.1466
V 1 4.6 0.2276
1 KM 1
F
5.6 0.1466 0.8208
0.8534 , y M K M x M
yP
1 yM
0.1792
Use Rachford-Rice eqn: f
Converge on V F
0.1084
0.2276
K i 1 zi
V
F
1
Find K i from DePriester Chart: K1
.076, V
Ki 1 V / F
73, K 2
F V F
4.1 K 3
152 kmol/h, L
0 . Note that 2 atm = 203 kPa.
.115
F V 1848 kmol/h .
zi
we obtain x1 .0077, x 2 .0809, x 3 .9113
V
1
Ki 1
F
From yi K i x i , we obtain y1 .5621, y 2 .3649, y3 .1048
Need hF to plot on diagram. Since pressure is high, feed remains a liquid
h F CPL TF Tref , Tref 0 from chart
From x i
2.D9.
, y8
0.21
V
Eq. (2-38) x M
2.D8.
0.3613
0.5705
CPL
CPEtOH x EtOH
CPw x w
29
Where x EtOH and x w are mole fractions. Convert weight to mole fractions.
Basis: 100 kg mixture
30
30 kg EtOH
0.651 kmol
46.07
70 kg water 70 18.016 3.885
Total = 4.536 kmol
100
0.6512
Avg. MW
22.046 Mole fracs: x E
0.1435, x w 0.8565 .
4.536
4.536
Use CPL
at 100 C as an average CP value.
EtOH
C PL
Per kg this is
37.96 .1435
18.0 .8565
C PL
20.86
MWavg
22.046
0.946
20.86
kcal
kmol C
kcal
kg C
h F 0.946 2000 189.2 kcal/kg
which can now be plotted on the enthalpy composition diagram.
Obtain Tdrum 88.2 C, x E 0.146, and y E 0.617 .
For
F 1000 find L and V from F = L + V and Fz Lx Vy
which gives V = 326.9, and L = 673.1
Note: If use wt. fracs. CPL
23.99 & CPL MWavg
1.088 and h F
217.6 . All wrong.
30
2.D.10 New Problem. Solution 400 kPa, 70ºC
From DePriester chart
Know y i
Kixi ,
K C3
zi
xi
1
Ki
V
1
F
5,
,
z C4
35 Mole % n-butane
K C4
1.9,
xi
yi
K C6
1
x C6
0.7
0.3
zi
K i 1 zi
0
z C3 1 z C6 z C 4 .65 z C6
V
1 Ki 1
F
zC6
zC6
V
For C6
0.7
z C 6 0.7 1 0.7
V
V
F
1 K C6 1
1 0.7
F
F
V
z C6 0.7 0.49
F
4 .65 z C 6
0.9 .35
0.7z C 6
RR Eq:
0
V
V
V
1 4
1 0.9
1 0.7
F
F
F
2 equations & 2 unknowns. Substitute in for z C6 . Do in Spreadsheet.
R.R.
2.D11.
Use Goal – Seek to find V F.
V
0.594 when R.R. equation 0.000881 .
F
V
z C6 0.7 0.49
0.7 (0.49)(0.594) 0.40894
F
L F 0.6 V F 0.4 & L V 1.5
Operating line: Slope
1.5, through y x z 0.4
31
2.D12.
For problem 2.D1c, plot x = 0.2 on equilibrium diagram with feed composition of 0.3. The
resulting operating line has a y intercept z V / F 1.2 . Thus V F 0.25 (see figure in
Solution to 2.D1) Vapor mole fraction is y = 0.58.
Find Liquid Density.
MW L
Then, VL
x m MWm
xm
MWm
x w MWw
xw
MWw
m
w
.2 32.04
.2
32.04
.7914
L
p MW
Find Vapor Density.
v
RT
v
.8
.8 18.01
18.01
1.00
MW L VL
20.82
22.51 ml/mol
20.82 22.51 0.925 g/ml
(Need temperature of the drum)
MW v y m MW m y w MW w .58 32.04 .42 18.01 26.15 g/mol
Find Temperature of the Drum T:
From Table 2-7 find T corresponding to y .58, x 20, T=81.7 C 354.7K
32
1 atm 26.15 g/mol
v
82.0575
ml atm
mol K
354.7 K
8.98 10
4
g/ml
Find Permissible velocity:
u perm
K drum
K drum,horizontal
L
v
1.25 K drum,vertical
Since V
Wv
L
F V
v
V F
B
0.25 1000
V MW v
1000 250
exp A
nFlv
250 26.15 lb lbmol
V
15615
WV
L
6537.5
A cs
A Cs
MW L
8.98 10
0.5525
8.98 10
u perm 3600
Or y c
AT
D
2.D14.
xc
1 xc
cp
Raoult’s Law: K C 4
20.82
15, 615 lb/h,
2.598
4
4
A Cs 0.2
17.74 ft/s
4A T
4
g/ml 28316.85 ml/ft 3
9.12 ft 2
3.41 ft and L 13.6 ft
1.76 .7
1 .76 .7
1
,
cp
0.80418
0.5682
pc
VPC 4
PTot
4.04615 ,
VPC 4
11121 mm Hg
log 10 VPC 6
3.2658 ,
VPC 6
1844.36 mm Hg
1.0
1.25
0.5525
log 10 VPC 4
xi
4
0.19582
cp
1
nFlv
0.0744, and n Flv
17.74 3600 8.98 10
v
1.824 ft 2 ,
1 yp
E
250 26.15 454 g/lbm
2.D13. New Problem. The answer is ycresol = 0.19582
xp
Since x c 0.3, x p 0.7, y p
1
1 xp
yc
3
4
0.925 8.98 10
V MW v
With L/D = 4,
nFlv
750
.925
0.442, and K drum ,horiz
u perm
D
6537.5 lb / h
L
WL
K drum ,vertical
2
nFlv
250 lbmol/h,
750 lbmol/h, and WL
Flv
C
zi
1
Ki 1 V F
1.0
33
0.3
0.7
1
11121
1844.36
1
1 0.4 1
1 0.4
P
P
Solve for Pdrum = 3260 mmHg
zi
xi
V
1 Ki 1
F
.3
11121
x C4
0.1527, y C 4 K C 4 x C 4
0.1527
11121
3260
1
1 .4
3260
1844.36
x C6 1 x C 4 0.84715,
y C6
0.84715 0.47928
3260
Check
1.00019
2.D15.
This is an unusual way of stating problem. However, if we count specified variables we see
that problem is not over or under specified. Usually V/F would be the variable, but here it
isn’t. We can still write R-R eqn. Will have three variables: zC2, ziC4, znC4. Need two other
eqns: z iC4 z nC4 constant, and z C2 z iC4 z nC4 1.0
Thus, solve three equations and three unknowns simultaneously.
Do It. Rachford-Rice equation is,
K C2 1 zC2
K iC 4 1 z iC 4
K nC 4 1 z nC 2
0
V
V
V
1 K C2 1
1 K iC 4 1
1 K nC 4 1
F
F
F
Can solve for zC2 = 1 – ziC4 and ziC4 = (.8) znC4. Thus zC2 = 1 – 1.8 znC4
Substitute for ziC4 and zC2 into R-R eqn.
K C2 1
.8 K iC 4 1
K nC 4
1 1.8 z nC4
z nC 4 z nC 4
V
V
1 K C2 1
1 K iC 4 1
1 K nC 4
F
F
K C2 1
V
1 K C2 1
F
Thus,
z nC 4
K C2 1
.8 K iC 4 1
K nC 4
1.8
V
V
1 K C2 1
1 K iC 4 1
1 K nC 4
F
F
Can now find K values and plug away. KC2 = 2.92, KiC4 = .375, KnC4 = .26.
Solution is znC4 = 0.2957, ziC4 = .8 (.2957) = 0.2366, and zC2 = 0.4677
2.D16.
0.52091
1
V
1
F
0
1
1
V
F
z C1 0.5, z C4 0.1, z C5 0.15, z C6 0.25, K C1 50, K C4 .6, K C5 .17, K C6
1st guess. Can assume all C1 in vapor, ~ 1/3 C4 in vapor, C5 & C6 in bottom
V / F 1 .5 .1 / 3 .53 This first guess is not critical.
0.05
34
R.R. eq.
f
K i 1 zi
V
F
1
49 .5
1 49 .53
Eq. 3.33
V
F
.4 .1
.83 .15
.95 .25
1 .4 .53
1 .83 .53
1 .95 .53
f V F
V
F
2
where
V/F
calculate
V/F
x C1
.584 150
1
2
V
1
F
2
.53 0.157 2.92
1
0.157 .
0.584
87.6 kmol/h and L 150 87.6
z C1
1
2
0.53 and f V / F
K C1 1 (V / F)
y C1 K C1 x C1 50 0.016883
Similar for other components.
2-D17.
Ki
0.157
1
zi K i 1
1
1
V
0
Ki 1 V F
.5
1 49 .584
62.4
0.016883
0.844
L F
1.5
V 0.4F 400, L 600 Slope
Intercepts y = x = z = 0.70. Plot line and find xA = 0.65, yA = 0.77 (see graph)
b. V = 2000, L = 3000. Rest identical to part a.
c. Lowest xA is horizontal op line (L = 0). xA = 0.12
Highest yA is vertical op line (V = 0). yA = 0.52. See graph
a.
35
d.
V = 600, L = 400, -L/V = -0.667.
Find xA = 0.40 on equilibrium curve. Plot op line & find intersection point with
y = x line. zA = 0.52
zh
1
zi
V xh
2.D18.
From x i
, we obtain
V
F Kh 1
1 Ki 1
F
Guess Tdrum , calculate K h , K b and K p , and then determine V F .
K1 1 z i
Check:
Initial guess: If x h
Kh
Try T
K1 1 V F
0 ?
.85 then Tdrum must be less than temperature to boil pure hexane
94 C . On this basis 85° to 90° would be reasonable. Try 85°C.
1.0, T
K h =0.8, K b
1
4.8, K p =11.7 .
0.6
1
V 0.85
1.471 . Not possible. Must have K h
F
0.8 1
73 C where K h 0.6 . Then K b 3.8, K p 9.9 .
0.6
1
.85
.6 1
V
F
0.6
0.85
0.706
0.735
Check:
K i 1 zi
1
8.9 .1
Ki 1 V F
1
2.8 .3
8.9 .735 1
.4 .6
2.8 .735 1
.4 735
0.05276
Converge on T ~ 65.6 C and V F ~ 0.57 .
2.D19.
90% recovery n-hexane means 0.9 Fz C6
Substitute in L
F V to obtain z C6 .9
C 8 balance: z C6 F
Lx C6
z C6
or
Vy C6
L x C6
1 V F x C6
F V x C6
1 V F x C6
K C6 Vx C6
x C6 K C6 V F
Two equations and two unknowns. Remove x C6 and solve
z C6
Solve for V F.
.9 z C6 KV F
.93C 6
V
.1
F
.9K C6
1 V F
.1
. Trial and error scheme.
Pick T, Calc K C6 , Calc V F, and Check f V F
If not K ref new
0?
K ref Told
1 df T
36
Try
T
70 C. K C4
V
3.1, K C5
.1
F
.9 .37 .1
Rachford Rice equation
2.1 .4
f
1 2.1 .231 1
.37
K ref
0.231 .
.08 .25
.63 .35
.08 .231 1
.63 .231
.28719
.37
K ref Tnew
Converge on TNew
.93, K C6
0.28745 use .28
1 0.28719
~ 57 C. Then K C4 2.50, K C8 .67, and V F
0.293 .
2.D20. New Problem. The K values are: K E 8.7 , K B 0.54 , K P 0.14
Can use Eq. (2-40), (2-41) or (2-42). If we use (2-42) the R – R eqn
f
F
Then RR eq =
0
K i 1 zi
0
V
1 Ki 1
F
7.7 .2
.46 z B
V
1+7.7 25
K C2
a.)
zB
K C5
0.153
Soln to Binary R.R. eq.
1
0.6078
zA
zB
F
KB 1
KA 1
0.55
0.45
F
.153 1
4.8 1
0.5309
zC2
0.55
V 1 3.8 .5309
1 K C2 1
F
x C5 0.8177 , y C5 0.1251
Need to convert F to kmol.
Avg MW 0.55 30.07 0.45 72.15
F 100, 000
V
kmol
K drum
L
0.1823,
yC2
0.8749
49.17
2033.7 kmol/h
hr 49.17 kg
V F F 1079.7,
u Perm
b.)
kg
.8 z B
0.86 .25
V
V
x C2
zE
0.8764 1.0955z B
0.3499
4.8
1 zB
.86 .8 z B
.46 .25
0.5265 0.51977 z B
0 .5757z B
2.D21.
1
Use z F
L
F V
954.0 kmol/h
v
v
To find
MW L
0.1823 30.07
0.8177 72.15
64.48
37
MW V
0.8749 30.07
For liquid assume ideal mixture:
V1
x C2 VC2,liq
0.1251 72.15
x C5 VC5,liq
x C2
MW C2
35.33
x C5
MW C5
C2,liq
VL
0.1823
30.07
MW L
64.48
VL
103.797
L
72.15
0.8177
0.54
0.621 g/ml
v
RT
atm
g
700 kPa
35.33
101.3 kPa
mol
v
ml atm
82.0575
303.16K
mol K
WL
K drum : Use Eq. (2-60) with FlV
WV
K drum
kmol 64.48 kg
WV
997.7
WV
881.5 35.33
exp
h
31,143.3
0.621
n 0.2597
2.6612
AC
D
0.18707
0.0010149
n 0.2597
0.009814
1.0 m
s 3.2808 ft
v
0.8111
4A C
m
s
3600
s
h
n 0.2597
4
2
0.3372
2.6612 ft/s
0.8111 m/s
1079.7
V MWV
u Perm 3600
3
n .2597
0.621 0.009814
ft
L
0.2597
0.81458
0.3372
v
31,143.4 kg/h
0.009814
1.877478
0.009814 g / ml
6, 4331.7 kg/h
kmol
64331.7
0.0145229
u Perm
103.797 ml/mol
0.63
MW v
For vapor: ideal gas:
FlV
C5,liq
kmol
h
35.33
0.009814
g
cm 3
kg
kmol
kg
1000g
6
10 cm
m3
3
1.392 m 2
1.33 m
Arbitrarily
L D
4,
L
5.32 m
38
2.D22.
K i 1 zi
V
f
F
1
K iP 1 z iP
V
1 K iP 1
F
Ki 1 V F
K NP 1 z NP
V
1 K NP 1
F
0
Solve for V/F.
1
V
K NP 1
K iP 1 z iP
F
K iP 1 z iP
V
F
p tot
log10 VP
K NP 1 z NP
760 mm Hg,
where z iP
z NP
0
1.0
90 C
1580.9
3.011679
20 219.61
1027.256 mm Hg ,
K iP 1027.256 760 1.35165
VPiP
Note: MWiP
8.11778
MWNP .
ziP
F
0.24384 0.5
z iP
1
x NP
K iP
1 x iP
5. 0°C, 2500 kPa
Fig 2.12: K M
5.7,
V
0.4095
V
1
F
0.5905; yip K iP x iP
K ethylene
1.43,
K Ethane
0.98,
y NP
0.44653
K C6
0.007
1
V
.47 .4
0.43 .05
F1
1 4.7 .6
1 .43 .6
V
V
F
F
2
.02 0.35
1
f
xi
x ethane
zi
1
Ki 1 V F
0.354, x C6
0.993 0.2
.02 .6
V
F
1
1
zi K i 1
1
1
yi
0.55347
0.6 (equal split ethylene and ethane)
F
Then Eq. (2-38),
0.629
0.24384 0.35165
x iP
First, try
0.5 in both wt & mol frac., as does z NP .
0.35165 0.5
V
Find
K NP 1 z NP
F
1499.2
7.84767
NP
log10 VPiP
Eq. (2-46)
T
V
2.75943
90 204.64
574.68 mm Hg , K NP 574.68 p tot 0.75616
VPNP
f
K iP 1
K NP 1 K iP 1
p drum
2.D23.
1
.993 6
0.6059
2
2
Ki 1
V
F
. xM
0.104, x ethylene
0.502,
0.0108
0.040
1.0001 OK
Ki xi
39
2.D24. New Problem. p = 300 kPa
At any T.
K C3
y C3 x C3
K C6
y C6 x C6
K’s are known.
Substitute 1st equation into 2nd
K C6
1 x C3 K C6
Solve for xC3,
x C3 K C3
K C3
At 300 kPa pure propane K C3
x C3
at 110°C
x C3
1 K C3 x C3
1 x C3
1 K C3 x C3
K C6
1 K C6
K C6
&
y C3
1.0 boils at -14°C
At 300 kPa pure n-hexane K C6
at -14°C
1 x C3
1 K C6
x C3
Check:
1 yC3
K C3 1 K C6
K C3
K C6
(Fig. 2-11)
1.0 boils at 110°C
1 K C6
1 K C6
0
K C3
0,
1, y C3
y C3
1 1 K C6
1.0
1 K C6
K C3 0
K C3
0
Pick intermediate temperatures, find K C3 & K C6 , calculate x C3 & y C3 .
T
0ºC
10ºC
20ºC
30ºC
40ºC
50ºC
60ºC
70ºC
K C3
1.45
2.1
2.6
3.3
3.9
4.7
5.5
6.4
K C6
0.027
0.044
0.069
0.105
0.15
0.21
0.29
0.38
x C3
1- 0.027
= 0.684
1.45 - 0.027
0.465
0.368
0.280
0.227
0.176
0.136
0.103
yC3
K C3 x C3
0.9915
0.976
0.956
0.924
0.884
0.827
0.75
0.659
See
Graph
40
41
b.
L V 0.6 0.4 1.5
x C3 0.3 , V F 0.4,
Operating line intersects y x 0.3,
Slope 1.5
L
F
y
x
z
V
V
F
0.3
at
x 0, y
z
0.75
V
0.4
Find yc3 = 0.63 and xC3 = 0.062
Check with operating line: 0.63
1.5 .062 0.75 0.657 OK within accuracy of the graph.
c.
Drum T: K C3
d.
y
.8,
y C3 x C3
x ~ .16
0.63 0.062 10.2 , DePriester Chart T = 109ºC
Slope
V
L
y
.8 .6
V
x
1
.16 .6
f
F
1.45
1 f
0.45
f
.45
0.69
2.D25. New Problem. 20% Methane and 80% n-butane
V
Tdrum .50 ºC ,
0.40 , Find p drum
F
K A 1 zA
K B 1 zB
V
0 f
V
V
F
1 KB 1
1 KA 1
F
F
Pick p drum
1500 kPa: K C4
13
(Any pressure with K C1
Trial 1
1 and K C4
12 .2
f1
K nC4
.6 .8
1 12 .4
1
1.0 is OK)
0.4
d f Pold
Need lower p drum
0.2178
1 .6 .4
K C 4 Pold
K C 4 Pnew
0.4
1
.2138
0.511
1.0
Pnew
1160
K C1
15.5 .2
f2
.489 .8
1 15.5 .4
K C 4 Pnew
Pnew
f3
16.5
1
0.4305
.4863
0.055769
0.511
1
1100
0.541
0.055769
K C1 17.4
16.4 .2
1
.489 .4
16.4 .4
.459 .8
1
.459 .4
0.0159 , OK. Drum pressure = 1100 kPa
42
b.)
zi
xi
1
yC1
2.D26. New Problem. a)
b) Stage is equil.
K C5
0.2
, x C1
Ki
K C1x C1
V
1 16.4 .4
1
F
17.4 0.02645 0.4603
0.02645
Can solve for L and V from M.B.
100 = F = V + L
45 Fz 0.8V 0.2162L
Find:
L = 59.95 and V = 40.05
y C3
0.8
K C3
3.700
x C3 0.2162
0.2
.2552
0.7838
These K values are at same T, P. Find these 2 K values on DePriester chart.
Draw straight line between them. Extend to Tdrum , p drum . Find 10ºC, 160 kPa.
2.D27. New Problem. a.)
VPC5 : log10 VP
1064.8
6.853
0 233.01
2.2832 ,
VP 191.97 mmHg
b.)
VP
3 760
2280 mmHg ,
log10 VP
6.853 1064.8 / T 233.01
Solve for T = 71.65ºC
c.)
Ptot 191.97 mm Hg [at boiling for pure component Ptot
d.)
C5:
log10 VP
30 233.01
637.51 mm Hg
VP
K C5
C6:
VPC5 Ptot
log10 VPC6
VPC6
K C6
e.)
KA
yA x A
1064.8
6.853
2.8045
637.51 500 1.2750
1171.17
6.876
30 224.41
187.29 mm Hg
187.29 500
KB
2.2725
0.3746
yB x B
(1 y A ) / (1 x A )
If K A & K B are known, two eqns. with 2 unknowns K A & y A
x C5
1 K C6
K C5
K C6
VP ]
1 0.3746
1.2750 0.3746
Solve.
0.6946
y C5 K C5 x C5 1.2750 0.6946 0.8856
f.) Overall, M.B., F = L + V
or 1 = L + V
C5 : Fx F Lx Vy
.75 0.6946 L + 0.8856 V
Solve for L & V: L = 0.7099 & V = 0.2901 mol
g.) Same as part f, except units are mol/min.
43
2.D28. New Problem.
V
h
D
F
L
From example 2-4, x H
With h D
C, D
0.19, Tdrum
378K, V F
0.51, y H
0.6, z H
0.40
V MWv
u perm 3600
v
C
C=4, MWv = 97.39 lbm/lbmole (Example 2-4)
1
3.14 10 3 g mol
v
28316.85ml
454g lbm
ft
3
0.198
lbm
ft 3
Example 2.4
u perm
K drum
L
v
,
K horiz
1.25 K vertical
V
From Example 2-4, K vertical
u perm
V
V
F
0.5541
F
0.4433 , K horiz
0.6960 0.00314
0.00314
lbmol
0.51 3000
hr
1.25 0.4433
0.5541
12
8.231 ft s [densities from Example 2-4]
1530 lbmol hr
lbmol
lbm
97.39
h
lbmol
ft
s
lbm
8.231
3600
0.1958 3
s
h
ft
1530
D
h
5.067 ft
4D
20.27 ft
1
Use 5 20 or 5
22 ft drum.
2
2.D29. New Problem. The stream tables in Aspen Plus include a line stating the fraction vapor in a given
stream. Change the feed pressure until the feed stream is all liquid (fraction vapor = 0). For the PengRobinson correlation the appropriate pressure is 74 atm.
The feed mole fractions are: methane = 0.4569, propane = 0.3087, n-butane = 0.1441, i-butane = 0.0661,
and n-pentane = 0.0242.
b. At 74 atm, the Aspen Plus results are; L = 10169.84 kg/h = 201.636 kmol/h, V = 4830.16 kg/h =
228.098 kmol/h, and Tdrum = -40.22 oC.
44
The vapor mole fractions are: methane = 0.8296, propane = 0.1458, n-butane = 0.0143, i-butane = 0.0097,
and n-pentane = 0.0006.
The liquid mole fractions are: methane = 0.0353, propane = 0.4930, n-butane = 0.2910, i-butane =
0.1298, and n-pentane = 0.0509.
c. Aspen Plus gives the liquid density = 0.60786 g/cc, liquid avg MW = 50.4367, vapor density =
0.004578 g/cc = 4.578 kg/m3, and vapor avg MW = 21.17579 g/mol = kg/kmol.
Since the flow area for vapor = LD and L = 4D, the area for flow = 4D 2. Then the equation for the drum
diameter is
D = {[(MWV) V]/[ρV uperm (L/D)]}0.5 = {[(21.17579 kg/kmol)(228.098 kmol/h)]/[(4.578 kg/m3)(uperm
ft/s)(1 m/3.281 ft)(3600 s/h)(4)]0.5
where the unit conversions are used to give D in meters. The value of u perm (in ft/s) can be determined by
combining Eqs. (2-59) and (2-60) for vertical drums with Eq. (2-64a).
Flv = (WL/WV)[ρV/ ρL]0.5 = (10169.84/4830.16)[0.004578/0.60786]0.5 = 0.18272
Resulting Kvertical = 0.378887 , Khorizontal = 0.473608, and uperm = 5.436779 ft/s, and D = 0.4896 m and L =
1.9585 m. Appropriate standard size would be used.
2.D30. New Problem. a. From the equilibrium data if yA = .40 mole fraction water, then x A = 0.09 mole
fraction water.
Can find LA and VA by solving the two mass balances for stage A simultaneously.
LA + VA = FA = 100 and LA (.09) + VA (.40) = (100) (.20). The results are VA = 35.48 and LA = 64.52.
b. In chamber B, since 40 % of the vapor is condensed, (V/F)B = 0.6. The operating line for this flash
chamber is,
y = -(L/V)x + FB/V) zB where zB = yA = 0.4 and L/V + .4FB/.6FB = 2/3. This operating line goes through
the point y = x = zB = 0.4 with a slope of -2/3. This is shown on the graph. Obtain xB = 0.18 & yB = 0.54.
LB = (fraction condensed)(feed to B) = 0.4(35.48) = 14.19 kmol/h and VB = FB – LB = 21.29.
c. From the equilibrium if xB = 0.20, yB = 0.57. Then solving the mass balances in the same way as for
part a with FB = 35.48 and zB = 0.4, LB = 16.30 and VB = 19.18. Because xB = zA, recycling LB does not
change yB = 0.57 or xA = 0.09, but it changes the flow rates VB,new and LA,new. With recycle these can be
found from the overall mass balances: F = VB,new + LA,new and FzA = VB,newyB + LA,new xA. Then VB,new =
22.92 and LA,new = 77.08.
45
Graph for problem 2.D30.
46
2.E1. New Problem. From Aspen Plus run with 1000 kmol/h at 1 bar, L = V = 500 kmol/h, WL = 9212.78
kg/h, WV = 13010.57 kg/h, liquid density = 916.14 kg/m3 , liquid avg MW = 18.43, vapor density = 0.85
kg/m3 , and vapor avg MW = 26.02, Tdrum = 94.1 oC, and Q = 6240.85 kW.
The diameter of the vertical drum in meters (with u perm in ft/s) is
D = {[4(MWV) V]/[3600 π ρV uperm (1 m/3.281 ft)]}0.5 =
{[4(26.02)(500)]/[3600(3.14159)(0.85)(1/3.281)uperm]}0.5
Flv = (WL/WV)[ρV/ ρL]0.5 = (9212.78/13010.57)[0.85/916.14]0.5 = 0.02157
Resulting Kvertical = 0.404299, and uperm = 13.2699 ft/s, and D = 1.16 m. Appropriate standard size would
be used. Mole fractions isopropanol: liquid = 0.00975, vapor = 0.1903
b. Ran with feed at 9 bar and pdrum at 8.9 bar with V/F = 0.5. Obtain WL = 9155.07 kg/h, WV = 13068.27,
density liquid = 836.89, density vapor = 6.37 kg/m3
D = {[4(MWV) V]/[3600 π ρV uperm (1 m/3.281 ft)]}0.5 =
{[4(26.14)(500)]/[3600(3.14159)(6.37)(1/3.281)uperm]}0.5
Flv = (WL/WV)[ρV/ ρL]0.5 = (9155.07/13068.27)[6.37/836.89]0.5 = 0.06112
Resulting Kvertical = .446199, uperm = 5.094885 ft/s, and D = 0.684 m. Thus, the method is feasible.
c. Finding a pressure to match the diameter of the existing drum is trial and error.
If we do a linear interpolation between the two simulations to find a pressure that will give us D = 1.0 m
(if linear), we find p = 3.66. Running this simulation we obtain, WL = 9173.91 kg/h, WV = 13049.43,
density liquid = 874.58, density vapor = 2.83 kg/m3, MWv = 26.10
D = {[4(MWV) V]/[3600 π ρV uperm (1 m/3.281 ft)]}0.5 =
{[4(26.10)(500)]/[3600(3.14159)(2.83)(1/3.281)uperm]}0.5
Flv = (WL/WV)[ρV/ ρL]0.5 = (9173.91/13049.43)[2.83/874.58]0.5 = 0.0400
Resulting Kvertical = .441162, uperm = 7.742851 ft/s, and D = 0.831 m.
Plotting the curve of D versus pdrum and setting D = 1.0, we interpolate pdrum = 2.1 bar
At pdrum = 2.1 bar simulation gives, WL = 9188.82 kg/h, WV = 13034.53, density liquid = 893.99 , density
vapor = 1.69 kg/m3, MWv = 26.07.
D = {[4(MWV) V]/[3600 π ρV uperm (1 m/3.281 ft)]}0.5 =
{[4(26.07)(500)]/[3600(3.14159)(1.69)(1/3.281)uperm]}0.5
Flv = (WL/WV)[ρV/ ρL]0.5 = (9188.82/13034.53)[1.69/893.99]0.5 = 0.0307
Resulting Kvertical = .42933, uperm = 9.865175ft/s, and D = 0.953 m.
This is reasonably close and will work OK. T drum = 115.42 oC, Q = 6630.39 kW,
47
Mole fractions isopropanol: liquid = 0.00861, vapor = 0.1914
In this case there is an advantage operating at a somewhat elevated pressure.
2.E2.
This problem was 2.D13 in the 2nd edition of SPE.
a. Will show graphical solution as a binary flash distillation. Can also use R-R equation. To
generate equil. data can use
x C6 x C8 1.0, and yC6 yC8 K C6 x C6 K C8 x C8 1.0
Substitute for xC6
1 K C8
x C6
K C6 K C8
Pick T, find KC6 and KC8 (e.g. from DePriester charts), solve for xC6. Then yC6 = KC6xC6
T°C
KC6
125
120
110
100
90
80
66.5
Op Line Slope
KC8
4
3.7
3.0
2.37
1.8
1.4
1.0
xC6
1.0
.90
.68
.52
.37
.26
.17
L
1 V F
.6
V
V F
.4
0
.0357
.1379
.2595
.4406
.650
1.0
yC6 = KC6 xC6
0
.321
.141
.615
.793
.909
1.0
1.5 , Intersection y = x = z = 0.65.
See Figure.
yC6 = 0.85 and xC6 = 0.52. Thus KC6 = .85/.52 = 1.63.
This corresponds to T = 86°C = 359K
b. Follows Example 2-4.
48
MW L
VL
x C8 MW
x C6
MW
x C8 MW
C6
C6
MW
x C8
C6
MW v
C8
86.17
.52
.659
C8
MW L
99.63
VL
145.98
L
.52 86.17
C8
yC6 MWC6
.48
114.22
42.57
454 g/lbm
.85 86.17
.15 114.22
1.0 90.38 g/mol
0.00307 g/ml
ml atm
RT
82.0575
359K
mol K
Now we can determine flow rates
V
V
F .4 10, 000 4000 lbmol/h
F
pMW v
L
V MW v
F V
4000 90.38
6000 lbmol/h, WL
Flv
L MW L
v
597, 780
0.19135
Wv
L
361, 520
42.57
exp
1.87748
0.01452
u Perm
K drum
L
.81458
2.1995
v
V MW v
A Cs
4A Cs
v
597, 780 lb/h
0.111, nFlv
2.1995
2.1995
0.00101
.18707
2.1995
4
2.1995
2
0.423
42.57 19135 .19135
6.3 3600 0.19135
4 83.33
90.38
6000 99.63
4000 90.38
u Perm 3600
D
3
0.423
v
ft 3
361, 520 lb/h
WL
K drum
lbm
0.19135 lbm/ft 3
v
Wv
99.63
145.98 ml/mol
.703
28316 ml/ft 3
.682 g/ml
yC8 MWC8
.48 114.22
6.30 ft/s
83.33 ft 2
10.3 ft. Use 10.5 ft.
L ranges from 3 × 10.5 = 31.5 ft to 5 × 10.5 = 52.5 ft.
Note: This uPerm is at 85% of flood. If we want to operate at lower % flood (say 75%)
have
u Perm75%
0.75 0.85 u Perm85%
0.75 0.85 .63 5.56
Then at 75% of flood, ACs = 94.44 which is D = 10.96 or 11.0 ft.
2.F1
xB
0
.1
.2
.3
.4
.5
.6
.8
.9
1
yB
0
.22
.38
.52
.62
.71
.79 .85 .91
.96
1
.7
Benzene-toluene equilibrium is plotted in Figure 13-8 of Perry’s Chemical Engineers Handbook, 6th ed.
2.F2.
See Graph. Data is from Perry’s Chemical Engineers Handbook, 6th ed., p. 13-12.
49
Stage 1)
z F1
.4
.4
Intercept
Stage 2)
z F2
13
.164
z F3
23
.240
f
.240
Intercept
2.F3.
f
.164
Intercept
Stage 3)
f
12
13
1.2
y1
23
T
Converge to
T
12
18 C,
T
x1
x2
x3
K1z1
K1
1,
.164
13
23
.01
Slope
.480
z2
12
y2
.240
y3
.461
z3
1
.022
1
K2
.043,
K3
.00095,
.52
K2
0.11,
K3
0.0033,
120.26
0C
z1
Dew Pt. Calc. Want
Try
.872
.246
2,
13
Slope
Bubble Pt. At P = 250 kPa. Want
Guess
23
Slope
0 C,
K1
K1
1.0
1.93,
50
Converge to
T 124 C . This is a wide boiling feed.
Tdrum must be lower than 95°C since that is feed temperature.
First Trial: Guess
Td,1 70 C : K1 7.8, K 2 1.07, K 3
Guess V F
.083
0.5 . Rachford Rice Eq.
7.8 1 .517
fV F
1
.07 .091
6.8 .5
1
V F .6 gives f .6
.07 .5
1
.14
.083 1 .5
.101
V F .56. f 0.56
By linear interpolation
.083 1 .392
.0016 which is close enough for first
trial.
V
V F F 56,
zi
xi
1
Ki 1 V F
x1
.1075
y1
.839
Data: Pick
L
x2
y2
.088
.094
44
and y i
x3
y3
Kixi
.806
x 1.001
.067
y .9999
th
25 C . (Perry’s 6 ed; p. 3-127), and (Perry’s 6th ed; p. 3-138)
Tref
1
81.76 cal/g
44
3597.44 kcal/kmol
2
87.54 cal/g
72
6302.88 kcal/kmol
3
86.80 cal/g
114
9895.2 kcal/kmol
at
T
0 C, CpL1
0.576 cal / (g C) 44
For
T
20 to 123 C, CpL3
at
T
75 C, CpL2
25.34 kcal/(kmol C) .
65.89 kcal/(kmol C)
39.66 kcal/(kmol C) . (Himmelblau/Appendix E-7)
Cpv a bT cT 2
propane
a = 16.26 b = 5.398 × 10-2
c = -3.134 × 10-5
-2
n-pentane
a = 27.45
b = 8.148 × 10
c = -4.538 × 10-5
-3
**n-octane
a = 8.163
b = 140.217 × 10
c = -44.127 × 10-6
** Smith & Van Ness p. 106
Energy Balance: E(Td) = VHv + LhL – FhF = 0
Fh F 100 .577 25.34
.091 39.66 .392 65.89 95.25 297, 773 kcal/h
Lh L
44 .1075 25.34
VH v
56 .839
0.94
.088 39.66
3597.4 16.26 5.398 10
6302.88 27.45 8.148 10
0.67 9895.3 8.163 140.217 10
E Tdrum
Converge on
For
V F
.806 65.89
2
2
70.25
117, 450
45
45
3
45
240, 423
60,101 Thus, Tdrum is too high.
Tdrum
57.2 C : K1
0.513, f 0.513
6.4, K 2
0.0027. V
.8, K 3
51.3, L
.054
48.7
51
x1
.137, x 2
.101, x 3
.762,
x1 1.0000
y1
.878, y 2
.081, y3
.041,
y1 1.0000
Fh F 297, 773; Lh L 90, 459; VH v
Thus Tdrum must be very close to 57.3°C.
x1 .136, x 2 .101, x 3 .762
209,999; E Tdrum
2685
y1 .328, y 2 .081, y 3 .041
V 51.3 kmol/h, L 48.7 kmol/h
Note: With different data T drum may vary significantly.
2.F4.
yV Lx
New Problem.
V F
x
Find:
0.4, V
0, y
Fz
4kmol h , L
F
z
2.5 .25
V
V = 4 kmol/h, L = 6 kmol/h.
or
y
6,
L
V
1.5
L
V
x
F
V
z
slope
0.625
From the graph, x = 0.19 y = 0.34
Equilibrium is from NRTL on Aspen Plus.
52
FIGURE 2.F.4.
2.G1. Used Peng-Robinson for hydrocarbons.
Find
Tdrum 33.13 C, L 34.82 and V 65.18 kmol/h
In order ethylene, ethane, propane, propylene, n-butane, xi (yi) are:
0.0122 0.0748 , 0.0866 0.3005 , 0.3318 0.3781 , 0.0306 0.0404 , 0.5388 0.2062.
2.G2.
x i yi
Used Peng-Robinson. Find Tdrum 30.11 C, L 31.348, V 68.66 kmol/h.
In same order as 2.G1,
are: 0.0189 0.1123 , 0.0906 0.3023 , 0.3255 0.3495 , 0.0402 0.0501 , 0.5248 0.1858 .
53
2.G3.
Used NRTL-2.
xM
Tdrum
0.18 and y M
xM
79.97 C ,
0.2475, y M
0.6287 .
Compares to graph with
0.55 . Different equilibrium data.
2.G4. New Problem.
COMP
METHANE
BUTANE
PENTANE
HEXANE
V/F = 0.58354
2.G5.
x(I)
0.12053E-01
0.12978
0.29304
0.56513
y(I)
0.84824
0.78744E-01
0.47918E-01
0.25101E-01
New Problem. Used NRTL. T = 368.07, Q = 14889 kW, 1st liquid/total liquid = 0.4221,
Comp
Furfural
Water
Ethanol
Liquid 1, x1
0.630
0.346
0.0241
Liquid 2, x2
0.0226
0.965
0.0125
Vapor, y
0.0815
0.820
0.0989
2.G6. New Problem. Used Peng Robinson. Feed pressure = 10.6216 atm, Feed temperature = 81.14oC,
V/F = 0.40001, Qdrum =0. Note there are very small differences in feed temperature with
different versions of Aspen Plus.
COMP
METHANE
BUTANE
PENTANE
HEXANE
V/F = 0.40001
x(I)
0.000273
0.18015
0.51681
0.30276
y(I)
0.04959
0.47976
0.39979
0.07086
2.H1. New Problem. The spreadsheet with equations for problem 2.D16 is shown in Appendix B of
Chapter 2. The spreadsheet with numbers for i-butane replacing n-butane is below.
MC flash, HW 2.G.b., MC flash with ibutane
K const. aT1
aT2
aT6
ap1
ap2
ap3
M
-292860
0 8.2445 -0.8951 59.8465
0
iB
-1166846
0 7.72668 0.92213
0
0
nPentane
-1524891
0 7.33129 0.89143
0
0
nHex
-1778901
0 6.96783 0.84634
0
0
p
T deg R
509.688 psia
36.258 F
150
zM
0.5 z iB
0.1 z np
0.15 znhex
V/F
0.602698586
0.25
54
guess
KM
KiB
KnPen
KnHex
xM
xib
xnPen
xnHex
Sum
RR M
RR nB
RRnP
RRnHex
sum RR
51.86751896
0.926804057
0.175621816
0.05400053
Use goal seek for cell B24 to = 1.0 change B9
0.015793905
0.104615105
0.29812276
0.581601672
1.000133443
0.803396766
-0.007657401
-0.2457659
-0.550194874
-0.000221409
2.H3. New Problem. Use the same spreadsheet as for problem 2H1, but with methane feed mole fraction
= 0.
Answer: V/F = 0.8625,
xib
0.08596648
xnPen
0.203540261
xnHex
0.710481125
KiB
3.886544834
KnPen
1.264637936
KnHex
0.574940847
yib = xib Kib = .33411 and so forth
55
Chapter 3
New Problems and new solutions are listed as new immediately after the solution number. These new
problems are: 3A7, 3A10, 3A11, 3C3, 3C4, 3D4, 3D8, 3G2.
3.A7.
3.B1.
Simultaneous solution is likely when one of the key variables can be found only from the
energy balances. For example, if only 1 of x D , x B , D, B, FR A dist are given energy balances
will be required. This is case for most of the simulation problems and for a few design
problems. In some simulation problems the internal equations have to be solved also.
a.
x D , x B , opt feed, Q Re b
x D , x B , opt feed, Q C
x D , x B , opt feed, S (open steam), sat’d vapor steam
All of above with fractional recoveries set instead of x D , x B
D, x B , opt feed, L/D
b. N, N F , col diameter, frac. recoveries both comp.
N, N F , col diameter, FR A dist, L o D
N, N F , col diameter, FR A dist, Q R
N, N F , col diameter, FR A dist, Q C
N, N F , col diameter, x D , QC
or x B
N, N F , col diameter, S (sat’d steam), sat’d vapor steam, x D or x B
Many other situations are possible [e.g., 2 feeds, side streams, intermediate condensers or
reboilers etc.]
3.C1.
See solution to problem 3-D2.
3.C2.
See solution to problem 3-D3.
3.C3.
New Problem in 3rd Edition. Fmix
Fmix z mix
z mix
F1z1
F2 z 2
F1z1
F2 z 2
Dx D
F1
F2
D B
Bx B (Mole frac. MVC)
Fmix
Now solve like 1 Feed Column Fmix & z mix . From Eq. (3-3),
3.C4.
D
z mix
xB
xD
xB
B
Fmix
Fmix kmol/h.
D kmol/h.
New Problem in 3rd Edition. See solution to 3D4, Part b.
56
3.D1.
F1 F2
V1
QC
F1z1
1
F1
Lo
D, x D
B D
F2 z 2
Solve D
Ftotal
F2
L
V
xB
xD
xB
F2
1500 kg/h
F2 z 2
Ftotal
D
0.85
Ftotal
1000 .60
Ftotal
500 0.10
1500
0.85 0.0001
B
B, x B
xD
z avg
F1
0.0001 0.01%
D xD
0.43333 0.0001
D
QR
Bx B
F1z1
z avg
xB
1500
0.43333
764.62 kg/h
1500 764.62
735.38
kg
h
Mass balance calculation is valid for parts a & b for problem 3G1.
L
a) o 3, Eq 3-14
QC
1 L 0 / D D h D H1
D
h D is a saturated liquid at x D 0.85 wt. frac. From Fig. 2-4, h D ~ 45 kcal/kg
H1 is saturated vapor at x D
QC
y1
0.85, H1 ~ 310 kcal/kg
1 3 764.62 45 310
EB around column.
F1h F1
F2 h F2
810, 497 kcal/hour
Qcol
QC
QR
Dh D
Bh B
h F1 81 C, 60 wt% ethanol ~ 190kcal / kg; h F2 20 C, 10 wt% ethanol ~ 10kcal / kg
h B (sat’d liquid – leaves equil contact, ~ 0 wt% ethanol) ~ 100 kcal/kg, Qcol = 0 (adiabatic)
QR
764.62 45
(b) V B
735.38 100
1000 190
500 10
810, 497
657, 259 kcal/kg
2.5 mass.
57
V (Satd vapor)
Lh L
QR
Reboiler
L
L
V
B
QR
L
VH V
Bh B
1838.45 735.38
2573.83
Sat’d liqd
V B
2.5 or V
2.5B 1838.45
B, x B =0.0001
Sat’d liqd
Approximately x B ~ y V ~ x L . Thus h L
QR
EB.
3.D2.
1838.45 640
QC
QC
hB
Dh D
100 . H V
735.38 100
Bh B
Qcol
640 kcal kg
2573.83 100
F1h F1
F2 h F2
992, 763 kcal / h
QR
34407.9 7353.8 190, 000 5000 992, 763
1,146, 001 kcal/h
Column: mass bal: F + S = D + B (1)
MVC: Fz + SyS Dx D Bx B (2)
Note: yS
0
energy bal: Fh f
SH s
QC
Dh D
Condenser: mass bal. : V1
Lo
D (4)
Bh B (3)
energy bal.: V1H1
QC
Lo D h D (5)
Solve Eqs. (1) and (2) to get:
Fz Fx B Sx B 100 .3 100 .05 100 .05
D
xD xB
.6 .05
Note: Not Eq. (3-3). Solve Eqs. (4) and (5) to get:
QC D 1 L D h D H1
36.4
Substitute Q C into Eq. (3):
L
Dh D
F S D hB
D
D hD
From Figure 2-4: h F
L D
3.D3.
8, h D
36.4 65
Fh F
SH S
H1
65, h B
92, H S
163.6 92
100 8
36.4 65 408
1
638, H1
608 kcal/kg.
100 638
1 2.77
External balances: F + C = B + D
Fz Cx C Bx B Dy D
QR
Fh F
Ch C
Bh B
(1)
(2)
DH D
(3)
58
F = 2000, C = 1000, z = .4, x C
1.0, x B
h C sat 'd liquid
50, h B sat 'd liquid
Around reboiler:
L V B
Lx N Vy Re b
For a total reboiler: x N
VH reb
xB , yN
xN
xB, hN
V B hN
QR
617 (saturated vapor at y N
hN
since h B
Fz Cx C
xB
Fy D
QR
QR
2200 327
.05 .8
Bh B DH D
QR
H reb
Fh F
2000
804500
hN
617 92
Bh B
hN
0.05 )
1
Cy D
800 and D
30.75
1000 50
0.3, z F,W
1 z F,M
804,500 cal/h
1532.4 kg/h
Dy D,M
Fz F,W (Frac Rec water in bottom)
z F,M
2200
Ch C
F B D
New Problem in 3rd Edition.
MVC Fz Bx B Dy D
But given recoveries. Thus, use:
Fz F,M (Frac Rec Methanol in distillate)
and
327 kcal/kg
yD
800 1000 1600 800
From Eq. (3),
30.7,
92
VH reb
H Re b
B
V
QR
hB
V
Thus
20 C
Bh B
or
H reb
hF
Bx B
QR
Solve Eqs. (1) and (2) for B: B
800 92
.80,
92, H D sat 'd vapor
Lh N
M.B.:
3.D4.
.05, y D
Bx B,W
0.7
y D,M unknown, x B,W unknown.
Methanol 29.7 100 0.3 .99
Dy D,M
If 99% methanol recovered in distillate, 1% is in bottoms 0.3 100 0.3 0.01
68.6 100 0.7 0.98
Water
1.4 100 0.7 0.02
xi
Since
Thus,
B
1 and
D
Bx B,M
Check:
2% water in distillate
Dy D,W
yi
Dy D,M
Bx B,W
Bx B,W
Bx B,M
1,
Dy D,i
Dy D,W
0.3 68.6
B D 100
F
D, and
29.7 1.4
Bx B,i
B
31.1 kmol h
68.9 kmol h
OK
59
Dy D,M
y d,M
x B,M
a)
D
29.7 31.1 0.955
D
Bx B,M B
0.3 68.9
31.1 & L0 D
0.00435
2. Thus L 0
62.2
Reflux liquid is in equilibrium with vapor y D,M
0.955
From equilibrium data (Table 2-7) x M,0 ~ 0.893 (linear interpolation)
b) E.B. Partial condenser: V1H1
V1
D L0
93.3
V1 y1
Dy 0
L0 x 0
y1,M
29.7
y1
Qc
Dy 0
62.2 0.893
L0 h 0
L0 x 0
V1
93.3 0.914; y1,W
35, 270 J mol @ 64.5 C
M
DH 0
1 y1,M
0.086
choose MeOH reference 64.5ºC.
35, 270 kJ / kmol
40, 656 J mol @100 C 40, 656 kJ/kmol choose water reference 100ºC.
The condenser is at 66.1ºC (linear interpolation Table 2-7).
H1
y1,M CP,V,M T1 64.5 y1,W CP,V,W T1 100
M y1,M
W y1,W
V1 is at T1 in equilibrium with y1,M
0.914. From Table 2-7 T1 ~ 67.6 C
Assuming only constant & linear T term are important in C P,V eqs., CP,V
methanol Tavg
67.6 64.5
2
C PV,M
42.93 0.08301 66.05
48.41
C P,V ,W
33.46 0.00688 83.8
34.04
TM
67.6 64.5 3.1 ;
Then
H1
H1
35270 0.914
TW
H D is at y D
HD
M
kmol
J
1000J
34.04
o
mol C
67.6 100
48.41
kJ
kmol C
kJ
kmol C
32.4
48.41 3.1 0.914
34.04
32.4 0.086
0.955@ 66.1 C
y D,M
W
y D,W
y D,M CP,V,M TD
CP,V,M TM,avg . Tavg,M
CP,V,M
42.93 0.08301 65.3
CP,V,W
CP,V,W TW,avg . TW ,avg
TW
mol
kJ
83.8 C .
Note λ terms dominate.
CP,V,M
CP,V,W
2
J 1000 mol
40656 0.086
35775.5 kJ kmol
67.6 100
66.65 C . For water, Tavg
CP Tavg . For
33.46 0.00688 83.05
66.1 100
64.5
66.1 64.5
2
48.35
100 66.1
2
34.03
yD,W CP,V,W TD 100
65.3
83.05
33.9
60
HD
35270 .955
HD
33682.85
40656 0.045
1829.5
48.35 0.955 1.6
73.88
51.91
34.03 0.045
33.9
35534.3
Reflux liquid at 66.1ºC and x M,0
0.893, x W,0 0.107
Reference MeOH 64.5ºC, water reference 100 ºC
h 0 CPL,M x M,0 TM CPL,W x W,0 TW
C PL,M
h0
QC
DH D
C PL,M Tavg
75.86 0.1683 65.3
86.85 0.893 1.6
L0 h 0
or Q R
31.1 35534.3
V1H1
Fh F
Overall EB
DH D
75.4 0.107
QC
Bh B
QR
QC
DH D
hB
13.53
2
60.06
hF
Tavg,M
3.D5.
0.99565
CPL,W 0.99565 99.2 100
75.86 0.1683 81.86
89.64
0.3, z W
0.7.
78 C
C PL,W 0.7 78 100
71.25 and CP,L,M
hF
805.4 kJ kmol Then
QR
31.1 35534.3
1,105,116
2, 242, 030 kJ h
46.5 kJ kmo l
CP,LM 0.03 78 64.5
78 64.5 2
93.3 35775.5
Bh B
81.86 and CPL,M
Feed is saturated liquid at z M
From Table 2-7, TF
kmol C
149 kJ kmol
99.2 C
CPL,M 0.00435 99.2 64.5
99.2 64.5
149
0.00435 and x B,W
Interpolating in Table 2.7 TBot
Tavg,M
33.9
kJ
Fh F
h B is saturated liquid with x B,M
hB
62.2
86.85
68.9
75.86 0.1683 71.25
46.5
2, 242, 030
3204
2, 242, 030
100
87.85
805.4
80, 536
3, 424, 479 kJ h
Mass Balances: F = D + S + B, Fz Dx D Sx S Bx B
Solving simultaneously, B = 76.4 kg/min, D = 13.6 kg/min.
Condenser: QC V1 h 0 H1
V1
L0
D
L D 1 D
From Figure 2-4, h 0
H1
4 13.6
54.4 kg/min
7.7 kcal/kg (x = .9, T = 20°C),
290 kcal/kg (y = .9, sat’d vapor).
Thus, Q C = 54.4 (7.7 – 290) = -15,357 kcal/min
Overall Energy Balance: Fh F
QR
Dh D
QR
QC
Dh D
Sh S
Sh S
Bh B
Fh F
QC
Bh B
From Figure 2-4,
hS
61 x S
.7, sat'd Liq'd ; h F
200 z
.2, 93 C ,
61
hB
99 x B
Thus,
QR 13.6 7.7
3.D6.
.01, sat'd Liq'd , h D
10 61
76.4 99
z
From Eq. (3-3), D = F
Then B = F = 1502.
Condenser: V
Lo
QC
xB
100 200
2500
7.7
15357
.4 .002
xD
xB
D
Lo D D D
hD
ho
3635.3 kcal/min
998 lbmol/h.
.999 .002
H V D Lo D 1
With 99.9% nC 5 have essentially pure nC 5 . Thus, it is at its boiling point.
hD
HV
QC
Overall:
11,369 Btu/lbmol.
C5
QR
11,369 998 4
Dh D
Bh B
Fh F
45,385, 048 Btu/h
QC
Distillate is at boiling point of pure nC5
K C5
1.0 on DePriester Chart) = 35°C. Bottoms
is at boiling point of nC6
67°C.
K C6 1.0
Converting to °F: 35°C = 95°F, 67°C = 152.6°F, 30°C = 86°F.
Note feed is obviously a subcooled liquid. Arbitrarily, pick a liquid at 0°F as reference.
(This will not affect the result and other values can be used.)
CPF x C5CPLC5 z C6 CPLC6
CPF
hF
.4 39.7
CPF TF
.6 51.7
0
46.9 Btu/lbmol °F
4033.4 Btu/lbmol
46.9 86
Distillate is almost pure nC 5 . Liquid at 95°F
hD
CPLC5 TDist
0
39.7 95
3771.5 Btu/lbmol
Bottoms is almost pure liquid nC 6 at 152.6°F.
hC pLC 6 Tbot
QR
3.D7.
998 3771.5
Eq. (3-3), D
F
z
xD
0
51.7 152.6
1502 7889.4
xB
1000
xB
7889.4 Btu/lbmol
2500 4033.4
0.7 0.001
0.999 0.001
45,385, 048
50,861, 491 Btu/h
700.4 kmol/h
B F D 299.6 kmol/h
Condenser: L o
L o D D 2.8 700.4
1961.1 kmol/h
Only this reflux is condensed since product is a vapor.
where λ is for essentially pure n-pentane.
QC Lo
QC
QC
1966.1
kmol
h
49,154, 204.85
11, 369
Btu
h
Btu
2.20462 lbmol
lbmol
1J
1 kmol
-4
9.486 10 Btu
5.18176 1010
J
h
62
From overall balance Q R
DH D
Bh B
Fh F
QC
Distillate is vapor at b.p. of pure n-pentane (35°C from DePriester chart, K C5 1.0 )
Bottoms is boiling n-hexane (67°C)
Conversions: 35°C = 95°F
- distillate & Feed and 67°C = 152.6°F - bottoms
As reference, arbitrarily choose liquid at 0°F.
Feed is subcooled liquid.
CPF z C5CPLC5 z C6 CPLC6
0.7 39.7
hF
CPF TF
Distillate H D
C5
HD
0
43.3 95 0
CPLC5 Tdist
11,369
43.3Btu lbmolo F
0.3 51.7
4113.5 Btu lbmol
0
39.7 95 0
15,140.5 Btu lbmol
Bottoms is pure C6 @152.6 F
hB
QR
700.4
1000
QR
3.D8.
CPLC6 Tbot
kmol
kmol
h
0
15,140.5
h
4113.5
68, 675,167.9
51.7 152.6 0
Btu
299.6
lbmol
7889.4 Btu lbmol
kmol
h
Btu
2.20462 lbmol
lbmol
kmol
Btu
1J
h
9.486 10 -4 Btu
7889.4
Btu
lbmol
49,154, 204.85
Btu
h
7.240 1010 J h
New Problem in 3rd Edition.
F 300,
zE
.3,
zw
.7
98% rec. E in distillate, 81% rec water in bot.
D
Dist. .98 90
y DE
B
1 .81 300 .7
128.1 kmol/h
.98 90
0.6885
128.1
Bottoms .02 90
.81 210
171.9 kmol h
y D , D, H D
b.
Partial Condenser.
Qc
Vapor
H1 y1 V1
L0
D
2, L 0
2D
2 128.1
256.2 kmol h.
x 0 in equilibrium with y 0 , thus from equation data x 0
Entering vapor y1 (from graph)
x 0 , L0 , h 0
0.575.
0.61
63
V1
c.
L0
D
256.2 128.1 384.3 kmol h .
E.B. on PC. V1H1 Qc DH dist L 0 h 0 . Can use Figure 2-4 by converting mole fracs to mass
fracs. Basis 1 kmole.
Distillate
.6885 mol E MW 46 31.671 kgE
.3115 mole W MW
5.607 kgW
18
37.28 kg total
Mass frac. E = 31.671 37.28 0.8496
Vapor V1
0.61 mole E 46
28.06 kgE
7.02 kgW
.39 mole W 18
35.08 kg total
Mass frac E = 28.06 35.08 0.7999
Liquid reflux L 0
0.575 mole E 46
26.45 kgE
7.65 kgE
0.425 mole W 18
34.1 total
Mass frac E = 26.45 34.1 0.7757
From Figure 2-4, H dist ~ 310 kcal kg, H1 ~ 330 kcal kg, h 0 ~ 65 kcal kg
Qc
DH dist
L0h 0
V1H 1
128.1
364.3
Know Qc
and
hr
kg
35.08 kg
Fh F Q R
Overall EB.
kmol 37.28 kg
kmol
Qc
310
330
DH dist
kcal
kg
256.2 34.1 65
2, 400, 517 kcal hr
Bh B
2, 400,517 kcal h
DH dist
1, 480, 426 kcal h .
To find Fh F and Bh B , need to convert mole frac to wt frac.
Basis 1 kmol
Feed
30 mole % E: .3 mole 46 13.8
12.6
70% W : .7 18
Mass frac E
Bottoms
13.8 26.4
0.5227
0.01047 mole 46
0.98953 mole 18
Mass frac E
From Figure 2-4
total 26.4 kg kmol
.48162
17.811
total 18.293 kg kmol
0.48162 18.28
h F satd liqd
70 kcal kg
h B satd liqd
97
0.0263
64
QR
Then
QR
1, 480, 426 171.9
2, 400,517
DH dist
Bh B Fh F Qc
kmol 18.29316 kg 97 kcal
h
kmol
26.4 kg
300
kg
1, 480, 426 305,525 554, 408
kmol
70
kcal
kg
3, 632, 069 kcal h
2, 400,517
3D9. New Problem 3rd Edition. B = (xD – z)/(xD – xB)F = [(0.9999 - 0.76)/(0.9999 – 0.00002)](500) = 120
QR
Lh
VH Bh B and L
Assume h
h B.
QR
V
V
L B h Vh
V B B
Bottoms is almost pure water.
QR
3.D10.
B
V H h
1.5 120
180 kmol h.
9.72 kcal mol
w
V
9072 kcal kmol
1.633 106 kcal h
180 kmol/h 9072
2 atm × 101.3 kPa/atm = 202.6 kPa. Pentane Recovery: 0.995 Fz P
0.995 1000 0.55
547.6333 kmol/h
0.9993
B = 1000 – 547.6333 = 452.3667
Pentane Recovery Bot F z p ,
D
Since
Dx D
Bx B
1 .995 1000 0.55
xB
0.006079 mol frac pentane
452.3667
Distillate is essentially pure Pentane. Bottoms Pure in Hexane. From DePriester Chart
K P 1@ p 202.6 kPa when Tdist 59.5 C
Kn
H
1@ p
202.6 kPa when Tbot
QC
For Total Condenser, Eq. (3-14)
h D pure pentane
kcal
1
CPLC5 Tdist
hD
39.7
59.5 25
H1
hD
H1
1369.65 11369
94 C
Lo
D
Tref
D hD
H1
choose Tref
1369.65
25 C
kcal
kmol C
kmol
assuming λ is independent of temperature
Btu
1
lbmol
0.252 kcal
7680.196
kcal
lbmol 0.454 kmol
Btu
kmol
kmol
kcal
Eq. (3-14) is
QC
1 2.8 547.6333
6310.5
13,132, 288
h
h
kcal
kcal
h B pure hexane
C PLC6 Tbot Tref
51.7
94 25 3567.3
kmol C
kmol
Feed is a liquid at 65°C
h F CPC5 z C5 CPC6 z C6 TF Tref
hF
39.7 0.55
51.7 0.45
65.25
1804kcal / kmol
65
QR
QR
Dh D
Bh B
Fh F
547.6333 1369.65
QR
QC
452.3667 3567.3
1000 1804
13,132, 288
13, 692, 081 kcal/h.
Note that QC and Q R are relatively close.
3.E1.
Was 3.D8 in 2nd Edition.
QC
D, x D
0.990
M.B. F + S = D + B
F
100 kmol h
zM
Fz M
p = 1.0 atm
SyS,M
Dx D
Since steam is pure, yS,M
0.6
0
Know F, z M , x D , x B
S
xB
Bx B
B
0.02
Unknowns S, D, B, Need E.B.
Fh F
QC
SHS
Dh D
Bh B
Pick as basis liquid at 0°C, h W 0 & h M 0 (essentially steam table choice)
Assume ideal mixtures.
h F CPavg TP Tref where CPavg 0.4 CPW ,L 0.6 CPM ,L
Felder & Rouseau p. 637 CPW
0.0754 kJ/mol
CPM
0.07586 16.83 10 5 T kJ/mol
CPM
CPM Tavg
CPM
0.07586 16.83 10
CPavg
0.4 0.0754
CPM
0 40 2
5
20
0.6 0.079226
h F 0.077696 40 0
Can also use steam table for water
CPM 20 C
0.079226
0.077696
3.1078 kJ/mol feed = 3107.8 kJ/kmol
H S is sat’d vapor steam 1 atm, H S
2676.0
kJ 18.0 kg
kg kmol
Steam Table F&R, p. 645 H S =48,168 kJ/kmol
h D is sat’d liquid at x D
hD
0.99 . From Table 2-7, T = 64.6°C
CPavg 64.6 0 where CPavg
CPM
CPM Tavg
CPavg
0.01 0.0754
CPM 32.3 C
0.01 CPW
0.99 CPM
0.07586 16.83 10
0.99 0.081296
5
32.3
0.081296
0.08124
66
HD
0.08124 64.6
5.2479 kJ mol
5247.9 kJ kmol
h B : Since leaving an equilibrium stage, sat’d liqd. 2% MeOH
Table 2-7, T = 96.4°C
h B CPavg 96.4 0 where CP avg 0.98 CPW 0.02 CPM
CPM
CPM
CPM
0.07586 16.83 10
CPavg
0.98 0.0754
hB
QC
QC
dist
0.07557 96.4
QC
CPM 48.2 C
5
48.2
0.08397
0.02 0.08397
0.07557 kJ mol
7.28509 kJ mol
7285.09 kJ mol
do EB around condenser
dist
0.99
Felder & Rousseau:
dist
96.4 0 2
V1
MeOH
dist
Lo
0.01
M
Lo
D
dist
D
W
35.27 kJ mol &
0.99 35.27
1 D
0.01 40.656
35,323.86 2.3 1 D
W
40.656 kJ mol
35.324
kJ
mol
116,568.7D kJ h
35, 323,86 kJ kmol
Plug Q C & numbers into E.B.
100 3107.8 116,568.7D 48,168S 5247.9D 7285.09B
or 310,780 + 48,168S = 121,816.6D + 7285.09B
Solve simultaneously with 2 MB. 100 + S = D + B
60 + 0 = 0.99D + 0.02B
One can use algebra or various computer packages.
Obtain:
E2.
D = 56.33 kmol/h, B = 211.71 kmol/h
S 168.04 kmol/h, Q C
6,566, 000 kJ/h.
Was 3.D9 in 2nd Edition.
F
500
kmol
h
F+S=D+B
Fz SyS Dx D Bx B
2 eq. 3 unknowns
Condenser: QC 1 L0 / D D h o H1
Note Eq (3-14) not valid.
500, 000
mol
h
For enthalpy pick reference pure liquid water 0°C and pure liquid methanol 0°C. Felder &
64.5 0
Rouseau: CPMeOH 75.86 0.01683T at Tavg
3225, C PMeOH 76.4 J mol C.
2
67
Assuming distillate pure methanol, boils at 64.5°C
h D CPMeoh ,liq T Tref
76.4 J/mol 64.5 0
4928.0 J mol
H1
40,198 J/mol
hD
QC
1
at 64.5 F
4928 35270 J/mol
4 4928 40198 D
Overall Energy balance: F h F
141, 080D J/h where D is mol/h
SHS
QC
Dh D
BhB
Bottoms is essentially pure H 2 O at 100°C
hB
C PW ,liq T Tref
HS
hB
75.4
at 100 C
W
J
mol C
100 0
7540
7540 40656 J/mol
J
mol
48196
For feed. 60 mole % Methanol boils at 71.2°C (Table 2-7).
hF
CPi zi T Tref
0.6 76.459 71.2
0.4 75.4 71.2
5413.7 J/mol
Now, Eqs are
(1) F + S = D + B
or 500,000 + S = D + B
(2) Fz Dx D Bx B or (500,000) (.6) = 0.998D + 0.0013B
(3) Q C
(4) Fh F
1
Lo
D h D H1 or Q C 141, 080D
D
Sh S QC Dh D Bh B or (500,000) (54137) + S (48196)
+ Q C = D(4928) + B (7540)
Solve simultaneously: D = 298.98, B = 1245.5, S = 1044.2 kmol/h
Q C = - 4.218 × 10+7 kJ/h
3.F1.
An enthalpy composition diagram is available on p. 272 of Perry’s Chemical Engineer’s Handbook, 3rd ed., 1950.
Eq. (3-3)
D
z
xD
xB
xB
F
0.79 0.004
0.997 0.004
25, 000
19, 788.5 kmol/h
Note that N 2 mole fractions were used since N 2 is more volatile. B = F – D = 5211.5
From enthalpy comp. diag. h D
QC
3.F2.
1 Lo D D h D
QR
Dh D
QR
0
H1
Bh B
0, H1
1350 kcal/kmol, h B
5 19788.5 0 1350
Fh F
160, h F
1575 .
Then,
133,572, 000 kcal/h
QC
5211.5 160
25, 000 1575
QC
95, 030, 000 kcal/h
We will use the enthalpy composition diagram on p. 3-171 of Perry’s 6th edition or p. 3-158 of
Perry’s 5th ed.Do for 1 kmol of feed:
Conversion of feed from kg to moles.
Basis 100 kg
30 kg NH 3 = 1.765 kmol
70 kg H 2 O 3.888
Total 5.653 kmol
Thus 1 kmol is 100/5.653 = 17.69 kg
68
Will work problem in weight fractions since data is presented that way.
95% recovery: (0.95) Fz = Dx D or, D = (.95) Fz / x D = (.95) (17.69) (.3)/(.98) = 5.15 kg.
B = F – D = 12.54 kg
xB
Fz Dx D
B
From diagram: h D
55, H1
1 Lo D D h D
and Q R
Bh B
Dh D
5.15 55
12.54
150, h F
H1
17.69
5
QC
5562 kcal/kmol feed
xD
1.000
x DC6
xB
0.0013316
7815 kcal/kmol of feed
709,520 kcal/h
995, 478 kcal/h
New Problem in 3rd Edition.
ASPENPlus. D = 988, L/D = 3, Peng Robinson, N
QR
5 kcal/kg
3 5.15 55 415
778,863 kcal/h, Q R
1, 064,820 kcal/h, Q R
QC
0.021
QC
12.54 150
G1. a.) Using NRTL. Q C
b.) QC
Fh F
5.15 98
415, h B
Eq. (3-14), QC
QR
G2.
17.69 .3
1.211 10
40, N F
20 (arbitrary values in Radfrac)
7
4.4426 10 7 Btu h,
4.9852 10 7 Btu h
69
SPE 3rd Ed. Solution Manual Chapter 4
New Problems and new solutions are listed as new immediately after the solution number. These new
problems are: 4A6, 4A13, 4C10, 4C16, 4D6, 4D9, 4D13, 4D15, 4D18, 4E4, 4E5, 4H1 to 4H3.
4A1.
Point A: streams leaving stage 2 (L2, V2)
Point B: vapor stream leaving stage 5 (V5)
liquid stream leaving stage 4 (L4)
Temp. of stage 2: know K y 2 / x 2 , can get T from temperature-composition graph or
DePriester chart of K = f(T,p).
Temp. in reboiler: same as above (reboiler is an equilibrium stage.)
4A2.
a. Feed tray = .6, z = 0.51 (draw y = x line), yF =0.52, xF = 0.29.
b. Two-phase feed.
c. Higher
4A6.
4A7.
4A13.
4A14.
New Problem in 3rd Edition. Answer is a.
See Table 11-3 and 11-4 for a partial list.
New Problem in 3rd Edition.
A. Answer is b
B. Answer is a
C. Answer is a
D. Answer is a
E. Answer is b
F. Answer is a
G. Answer is b
If feed stage is non-optimum, the feed conditions can be changed to have an optimum
feed location.
4B2.
a. Use columns in parallel. Lower F to each column allows for higher L/D and may be sufficient
for product specifications.
b. Add a reboiler instead of steam injection. Slightly less stages required and adds 1 stage.
c. Make the condenser a partial instead of a total condenser. Adds a stage.
d. Stop removing side stream. Fewer stages are now required for the same separation.
e. Remove the intermediate reboiler or condenser and use it at bottom (or top) of column. Fewer
stages, but all energy at highest T (reboilers) or lowest T (condenser) for same separation.
Many other ideas will be useful in certain cases.
4C7. Easiest proof is for a saturated liquid feed. Show point z, y D satisfies operating equation.
Solution: Op. Eq.
y
Substitute in
y
yD V
But
q 1.0, V
Lz
D, L
L V x
yD , x
L V 1 xB
z
L V xB
F, L V
y D D Fz Bx B
Which is external mass balance.
B
QED.
70
Can do similar for enriching column for a saturated vapor feed.
4.C10. New Problem in 3rd Edition. If we consider λ, the latent heat per mole to be a positive quantity,
then QR V . With CMO and a saturated liquid feed V V (1 L / D) D , and then
QR / D
4.C16.
(1 L / D) .
New Problem in 3rd Edition. Define a fictitious total feed FT , z T , h T
FT
F1
F1z1
F2 , z T
F2 z 2
, hT
F1h F1
F2 h F2
FT
FT
Intersection of top & bottom operating lines must occur at feed line for fictitious feed F T.
(Draw a column with a single mixed feed to prove this.)
This feed line goes through y x z T
with slope
where
FT
qT
qT
qT 1
H mix
hT
H mix
h mix
and H mix , h mix are saturated
vapor and liquid enthalpies at feed stage of column with
mixed feed.
Given p, L/D, saturated liquid reflux, x D , x B
A
z0
B
opt feed locations, z1 , z 2 , F1 , F2 , h F1 , h F2
z2
y
zT
z1
Plot top op line. Plot all 3 feed lines. Draw
xB
x
b.)
Does
line from point A to y = x =
qT
q1F1
to obtain
op. line. Connect pts B & C to get
q 2 Fbot.
2
FT
middle op. line.
71
check q T
H mix
hT
H mix
h mix
F1h F1
H mix
F2 h F2
F1
FT
H mix
F2 H mix
h mix
F1H F1
H mix
F2 h F2
h mix FT
where H mix & h mix are vapor and liquid enthalpies on feed stage of mixed column
F1 H mix
H mix
qT
h F1
F2
h mix
H mix
h F2
H mix
h mix
FT
Usual CMO assumption is λ >> latent heat effects in either vapor or liquid.
H mix h F1
H mix h F2
Then
q1 and
q2
H mix h mix
H mix h mix
F1q1 F2 q 2
Thus q T
if CMO is valid.
FT
4D1.
L
a. Top op line: y
Intersects y
x
When x
V
xD
x
L
V
x D and
L
L D
1.25
V
1 L D
2.25
0.5555
0.9
0, y
b. Bottom op line: y
1
1
L
x
L
xD
V
L
0.4
1 x B , and
Plot – See diagram
L
V B
V B 1
3
V
V
V B
2
V
V
Intersects y = x = xB = 0.05
1 0.5 / 2
@y 1 x
0.683 this is convenient point to plot
32
c. See diagram for stages. Optimum feed stage is #2 above partial reboiler.
5 equilibrium stages + PR is more than sufficient.
72
d. Feed line goes from y = x = z = 0.55 to intersection of two operating lines.
q
Slope
1.0 or q 0.5 .
q 1
This is a 2 phase feed which is ½ liquid & ½ vapor.
4D2. New Problem in 3rd Edition. Part a.
y
b.
c.
x
zE
.6
Slope
L
F V
1 V/F
.63
1.703
V
V
V F
.37
From Table 2-1, at 84.1° C y .5089
H hF
liquid at 20°C
and 40 mole % ethanol.
q
H h
The pressure in Figure 2-4 is very close to 1.0 atm, thus it can be used, but must convert to wt
frac.
73
Basis 1kmol feed.
.4 kmole E
.6 kmol Water
From Figure 2-4
H
q
Alternate Solution:
40 mole %E
.6 MW
46
0.63 wt frac.
10.8 kg
18
398 kcal kg , h
18.4 kg
total
29.2 kg
75, h F 20 C
10
398 10
1.20
398 75
q
1.2
Slope
6
q 1
.2
40 mole % ethanol boils at 84.1°C (Table 2-1).
Then if pick reference as saturated liquid at 40 mole %
h F Cp,40%liq 20 84.1
h
d.
.4 MW
0,
63 wt%, H
H
40%E
398 kcal kg , h
CPvapor
y E CPEvapor
65, h F
398
kcal
kg
C p vapor 120 84.1
y w CPw ,vapor
Assume only 1st and 2nd terms in C P equations are significant.
From Problem 2.D9
CPvapor .4 14.66 0.03758T .6 7.88 .0032T
kcal/kmol T is C
which simplifies to
CPvapor
10.592 0.16952T
120
C p dT is equal to CPvapor @ Tavg
For linear
84.1
Tavg
84.1 120 2 102.05 . Then C Pv ,avg
398
hF
398 15.149
q
e.
q
q
f.
Flash
kcal
hF
V
F
kg
10.592
12.32 120 84.1
15.147
398 65
333
f, L
13 12 , slope
.7,
12.32
kcal
kmol
kcal 1 kmol
kmol 27.2 kg
413.15 kcal kg
398 413.15
L L
0.16952 102.05
L
F
0.045.
F
12
q q 1
13
L
12
13 12
1 12
L
1 V F
.3
3
V
V F
.7
7
F
13
See graph for feed lines.
74
Graph for 4.D2
75
4.D3*.
a. Basis 1 mole feed.
0.4 moles EtOH × 46 = 18.4 kg EtOH
0.6 moles H2O × 18 = 10.8 kg H2O
Total = 29.2
wt frac 18.4 / 29.2 0.63 wt frac EtOH
Calculate all enthalpies at 0.63 wt frac. Hv = 395, HL = 65 (from Figure 2-4). hF is liquid at
200°C. Assume Cp,liq is not a function of T. Estimate,
46.1
23
h h L 60 C h 20
kcal
C P ,liq .63 wt frac ~
0.864
T
60
20
80
kg C
Then h F
h L 200
q
Hv
CPL 200 60
hF
.864 200 60
h L 60 C
395 167.1
0.691,
q
46.1 167.1
0.691
2.24
Hv hL
395 65
q 1
0.309
b. From Figure 2-4 at 50 wt% ethanol Hv = 446 and hL = 70. Since CMO is valid obtaining both
enthalpies at 50% wt is OK. The feed is a liquid
h F CP,liq TF Tref
CP,liq 250 0
CP,liq CP,EtOH z EtOH CPw z w in Mole fractions
Basis 100 kg solution
50 kg EtOH 46.07=1.085 kg/kgmole
50 kg W 18.016 2.775 kg moles
Total 3.860 kg moles
Avg M.W. 100 3.86 25.91 kg/kgmole
Thus, zW = 0.719 and zE = 0.281
CP,liq
37.96 .281
18.0 .719 23.61
C P,liq in kcal kg C
hF
q
hF
4.D4*. a.
q
Hv
hL
446 70
q q 1
x
z
228
0.58
H
25 300
H hF
0.911 . Then,
4.D4a
H CPv 350 50
L L F where L
L L
25.91
Hv
q
q
MWAVG
250 C
kg C
h F 446 228
Slope
slope
23.61
kcal
H h
q q 1 0.6. y
b.
c.
0.911
CP
y=x
25 300
z
1.5
0.6 is intersection.
L 0.6F. Then q
feed
line
L 0.6F L / F
.5
.6
0.6, and
.7
1.5
F where L
L F 5. q
L F5 L F
1 5 , slope
q q 1
16
76
4.D5*.
h liq
fL
h reflux
3100 1500
h liq
17500 3100
L0
L0 D
1.1
V1
L0 D 1
2.1
H vap
1 fc
L1
V2
Alternate Solution
L1
L1
V2
4D6.
q
qL0
L1
0.524
1.1111 .524
1 f c L 0 V1
For subcooled reflux,
Then,
L 0 V1
0.1111
1
0.55
.111 .524
L1
H h0
17500 1500
L0
H h1
17500 3100
1.111
1.1111 L0
L1 D
,
L1
1.111 L0
L1 D L1 D 1 D
L1 1.222
0.55
V2 2.222
New Problem in 3rd Edition.
1.111 1.1
D
a) 175
F1
F2
1.2222
B D
85 75 .6 100 0.4
0.1 B 0.9D
Solve simultaneously.
D 84.375 and B 90.625 kmol hr
b) Feed 1. q1 1, vertical at y x z1 0.6
Feed 2.
60% vapor = 40% liquid q 2
Slope feed line
Bottom Op. Line
q2
0.4
q2 1
.06
y
L V x
Slope
L
Middle
Lx
When
x
0, y
F2
L V
0.4
2 3 through y
x
z2
L V 1 x B . Through y
V B 1
V B
0.4
x
xB
32
B V
F2 z 2
F2 z 2
Bx B
Vy
y
L
V
x
F2 z 2
Bx B
V
Bx B
, Slope L V
V
Also intersects bot. op. line and Feed line 2.
Do External Balances and Find D & B. Then V
V/B B
2B 181.25
L V B 271.875
At feed 2, L .4F L or L L 0.4F 271.875 40 231.875
V V 0.6F 181.25 60 241.25
L V 0.961
40 9.625
x 0, y
0.126 Plot Middle Op Line.
241.25
77
y
L
V
Know that y x
Also, L
L
x
F1
1
L
xD
V
x D and gives through interaction Middle and Feed line 1.
231.875 75 156.875 and V
L V 156.875 241.25
V
241.25 ; thus,
0.65
c) See graph.
Graph for 4D6.
78
4.D7*. a. Plot top op. line: slope
L
V
.8 , x
L
y
.9. Step off stages as shown on Figure.
V
B
2 , x y x B 0.13. Step off stages
V
(reboiler is an equil stage). Find y2 = 0.515.
c. Total # stages = 8 + reboiler
Optimum feed plate = 7 or 8 from top. Plot feed line. Goes through x = y = z = .3, and
intersection of two operating lines.
9
q
slope
gives q = 0.692.
4 q 1
b. Plot bottom op. line:
slope
1 1
xD
4.D8*. The equilibrium data is plotted and shown in the figure.
q 0.692 and q q 1
9 4
From the Solution to 4.D7c,
a. total reflux. Need 5 2/3 stages (from large graph) – 5.9 from small diagram shown.
.9 .462
b. L V min
0.660 (see figure)
.9 .236
L V min
L D min
1.941
1 L V min
c. In 4.D7, L D act
L V
1 L V
.8
.2
L Dact
Multiplier
Multiplier = 4/1.941 = 2.06
4
L D
min
79
d. Operating lines are same as in Problem 4.D7. Start at bottom of column. Reboiler is an
equilibrium contact. Then use E MV AB AC 0.75 (illustrated for the first real stage)
Stage 1 is the optimum feed stage. 11 real stages plus a partial reboiler are sufficient.
4D9.
New Problem in 3rd Edition.
a)
F1 F2 D B
F1z1
F2 z 2
100 F1
Dx B
Bx B
F1 .42
Solve simultaneously, B 113.68, F1
b)
L D
L
1
2
,
80 B
F1
B 20
18 .66 80
0.04 B
93.68
L
L D
12
1
V
1 L D
32
3
L
D 40, V L D 120
D
V V 120
Saturated Liquid Feed
L L F1 40 93.68 133.68, L V
c) Top Op. Line – Normal: y
Through y
Bottom – Normal: y
x
L V x
1.114
1 L V xD
x D , Slope 1 3, y intercept
L V x
L V 1 x B , through y
Also through intersection, F2 feed line and middle op. line.
2
3
x
.66
.44
xB
Feed line F2 slope
L F2
.7
VF2
.3
80
Middle
y
Slope
0, y
Dx D
xD
F1z1
F1z1
80 .66
93.68 .42
0.11212
V
120
d)Opt. Feed F2 stage 1 from bottom, Opt feed F1 , Stage 2. 4 stages + PR more than sufficient.
Also,
x
D
(or do around bottom)
V
V
L V . Through intersection feed line F1 and top op. line.
L V x
Graph for 4D9.
81
4.D10*. Operating Line y
L V x
1
L
x D , where
V
Thus, operating line is y = .8x + .192
y
a. Equilibrium is x
or x1
1
y
L
L D
4
V
1 L D
5
.8
y1
1.79 .76y1
Start with y1 = .96 = x D
Equilibrium:
x1
Operating:
y2
Equilibrium:
x2
Operating:
y3
y1
.96
1.76 .76y1
1.76 .76 .96
.8x .192 .8 .9317
y2
x
y
1.0
1.0
.192
1.76
.76 .93736
.8x 2 .192 .8 .89476
.9
.9406
0.93736
.93736
1.76 .76y 2
b. Generate equilibrium data from: y
0.9317
.192
0.89476
0.9078
1.76x
1 .76x
.8
.7
.8756 .8042
.6
.7253
.5
.6377
.4
.5399
Plot equilibrium curve and operating line. (See Figure). Slope = L/V = .8, y intercept (x = 0)
= 0.192, y = x = x D = 0.96. Find x 6 = 0.660.
4.D11. a) Same as 4.D2 part g. q = 1.0668, slope feed line = 15.97.
b) Top y
L V x 1 L V x D goes through y = x = x D = 0.99
L V
L D
1 L D
Feed line: Slope
0.6969 @ x = 0
q q 1 ,
y
y = (1-L/V) x D = (1-0.6969) 0.99 = 0.300
x
z
0.6
82
Bottom Op line:
L
yV Lx Sy M,S Bx B
But y M,S 0 (Pure steam)
With CMO B L
V
S
B
y
L
V
x
L
V
xB
y= 0, x = x B . Also goes through intersection of feed line and top op.line.
Stages: Accuracy at top is not real high. (Expand diagram for more occupancy).
As drawn opt. Feed = #6. Total = 9 is sufficient,
c.
L V
min
Slope
L
D
0.99 0.57
0.99 0
L V
min
1 L V
0.4242
0.4242
min
1 0.4242
0.73684
Actual L/D is 3.12 × this value.
83
4.D12. L V
y
L
V
x
L D
1 L D
1
L
V
Bottom slope
34
slope. Top op line goes throug y
xD @ x
L V
0, y
.25 .998
B
1245167
S
1044168
1.19
x
xD
0.998
0.2495
From Soln to 3.D9 or
from graph. 1.169
Feed line is vertical at z = 0.6. Can also plot top and feed lines, and then find bottom from 2
points y 0, x x B & intersect top & feed .
For accuracy – Use expanded portions near distillate & near bottoms.
From Table 2-7 from (x = .95, y = .979)
Draw straight line to (x = 1.0, y = 1.0)
From (x = 0, y = 0) draw straight line to (x = 0.02, y = 0.134)
or (x = 0.01, y = 0.067)
Opt feed = # 9 from top. Need 13 equilibrium stages.
84
85
4.D13. New Problem in 3rd Edition. a.)
L
b.) See figure.
V
L
See Figure
0.665 0.95
0.30 0.95
MIN
L
L V
0.4385
0.4385
0.7808
D MIN V L 1 L V 0.5615
L
L
L D
1.5616
c.)
2.0 L D MIN 1.5616 ,
D
V 1 L D 2.5616
L
y intersect 1
V
yD
0.3709 . Top operating line y
Goes through y
Bottom y
L
V
x
L
V
0.6096
L
x
V
x yD
1
L
V
0.95
yD
1 xB
Goes through y
x x B & intersection top operating line & feed line.
Feed Line: Vertical (saturated liquid, q = 1). Through y x z 0.3
Plot & Step off stages. Optimal feed = 5 below PC. 6 + PC + PR more than sufficient.
0.85 0.025
d.) Slope bottom: See figure for parts c & d. L V
1.941
0.45 0.025
1
1
V B V L V
1.0625 .
L V 1 0.941
86
Graph for problem 4.D13.
87
4.D14a.
88
New S.S.
External M.B. S = B
Sys = BxB . Since yS = 0 (pure water)
xB = 0
B
S
4.D14b.
Two approaches to answer. Common sense is all methanol leaks out and x MA
McCabe-Thiele diagram: This is enriching column with z
horizontal feed line is at x
x M,b
y intercept
L
V
x
L
1
V
1 L V yD
Bottom operating line
y
0 . Intersection top op. line and
0 , which is also a pinch point. Thus x M,d
4.D15. New Problem in 3rd Edition. Saturated liquid. q
Top operating line y
ys
y D , Slope
q
q 1
L
L D
2
V
1 L D
3
1 3 0.6885
L V x
1,
0.
0.2295 and y
0 also.
, feed line vertical @ z
x
L V 1 x B goes through y
.3 .
yD
x
xB
And goes through interaction feed line and top operating line. See graph.
Optimum feed is stage 2 below partial condenser. Partial condenser + Partial reboiler + 3
equilibrium stages are more than enough to obtain separation.
89
Graph for problem 4.D15.
90
4.D16*.
q
L-L
Hv
hF
F
Hv
hL
Using 32°F = 0°C as reference T, h F
Hv
hL
4033.4 Btu/lbmole.
at feed conditions.
. Approx.
.4 11369
.6 13572 12691 Btu/lbmole
For approx. temperature of feed stage, do bubble pt. calc.
y1 1
K1x1
K1z1
Pick T = 48°C (~ 40% of way between boiling pts.)
K C5 1.5, K C6 .54,
K1x1 1.5 .4 .54 .6
K C5 Tnew =
.54
.92
K C5 50 C
Hv
=.594, Tnew
1.6,
Note : CP feed,liq
Hv
q
1.6 .4 .584 .6
.99 Close enough.
, 50 C 122 F
feed
Hv
50 C
K1 x 1
h L 50 C
.92
CPfeed ,Liq 122
46.9 122
5721.8
46.9 is from Prob. 3-D6.
5721.8 12691 18412.8 Btu/lbmole
HV
hF
18412.8 4033.4
HV
hL
12691
1.133
Note: h F is from Prob. 3.D6.
4.D17.
L
Top Op. Line: y
x
L
V
L D
V
1 L D
x
L
1
V
7 2
0, y
1
The vertical line at x
xS
9 2
L
x D , goes through y
x
xD
0.9
7 9
2
xD
.9 =0.2
V
9
Plot Top. Step off 2 stages. Find x S ~ 0.81
0.81 is the withdrawal line.
Bot. Op. Line intersects Top at x
xS .
Also know it intersects feed line at x
F
External Balances
Fz
Dx D
x B (unknown)
D B S Don’t know D, B, or x B .
Bx B
Sx S
Feed enters as saturated vapor. Thus q
0&V
F
Bottoms leaves an equilibrium contact,
it is saturated liquid L
Do flow balances
V F 100
V V 100 since S is removed as saturated liquid.
B
91
L
L
V
V
7 9 100
L
L S
B
L 62.777
Fz Dx D Sx S
xB
77.777. D
77.7777 15
60
V L 100 77.777
62.7777. L V
22.222 0.9
B
Plot. Op. line
Step off stages. 9 is more than sufficient.
4.D18. New Problem in 3rd Edition. Feed F1 : z1
62.7777
62.7777 100
15 0.81
22.222
0.6278
0.444
0.6, saturated liquid, q 1, q / (q 1)
92
Feed F2 : z 2
0.4, 80% vapor hence 20% liquid q
q
LF / F
0.2F / F .2
.2
14
q 1
.8
Part a.) Bottom operating line goes through point, y
x
xB
0.04
Max L V to point intersection feed F2 line and equilibrium curve.
L
Slope
1.0 .04
V
V
B
Part b. L
V
L
min
F1
1
1
V
L V 1
1.2326
100
.2 80
116
L L F2
L
V B and V B 1.5
L
1.5B B
L B 116 46.4
D
V
V VF2
100
V 133.6
Check overall balance
116
B
V
L
0.8113
100
L
116
2.2326
.47 .04
max
46.4
2.5
69.6
116
L V
69.6 .8 80
69.6
1.66667
133.6
0.7485
F1
F2
D B
180 133.6 46.4 180.0 OK
To find y D use MVC mass balance
F1z1
or
yD
F2 z 2
F1z1
Dy D
F2 z 2
Bx B
Bx B
100 .6
D
80 .4
133.6
Actual bottom op. line: y
L
V
x
L
V
46.4 0.4
0.675
1 xB
L
V B
V B 1
2.5
5
V
V
V B
1.5
3
Goes through y x x B 0.04 , Slope 5 3
2nd point
y = 1, x = 0.616 (this was arbitrarily found by setting y = 1.)
Plot bottom op. line
Dy D F1 z1
L
Top Op. line: yV F1z1 Lx Dy D . y
x
V
V
Goes through intersection feed line for F 2 and bot. op. line. Does NOT go through
y x yD .
Since D & F, passing streams, Point z1 , y D is on op. line.
93
Figure for 4D18
4.D19*.
B = 0. Then from external balance F = D + B must have D = F = 1000. Acetone balance
becomes Fz Dx D or x D z 0.75 .
L
To predict x B need operating lines. Top: y
V
L
L V
2
V
1 L D
3
x
and y
L
1
V
x
xD
xD
.75
94
Bottom: L V 1.0 . Thus y = x is operating line. From Figure x B
Feed line can be calculated but is not needed.
4.D20*.
0.01 to 0.02
To use enthalpy composition diagram change to wt. fractions. Basis = 1 kg mole
Distillate:
Weight Fractions:
Feed:
Weight Fractions:
Bottoms:
Weight Fractions:
0.8 ETOH = (.8)(46.07) = 36,856
0.2 Water = (.2)(18.016) = 3.6032
Total = 40.459
EtOH = .911, Water = .089
0.32 (EtOH) = (.32)(46.07) = 14.7424
0.68 (W) = (.68)(18.016) = 12.25088
Total = 26.993
EtOH = .546, W = .454
0.04 EtOH = (.04)(46.07) = 1.8428
0.96W = (.96)(18.016) = 17.295
Total = 19.1378
EtOH = .0963, W = .9037
Condenser Energy Balance is V1H1
Lo
D
Qc
Qc
D ho
H1
Lo h o
Dh D which can be solved for L o D .
1
From chart:
h D 54 Kcal/kg and H1 285 Kcal/kg
Need D in weight units. Convert feed to weight units.
100 kgmoles
Ethanol:
.32 46.07 1474.24 kg/hr
hr
Water:
(100)(.68)(18.016) = 1225 kg/hr
Total:
F = 2699.328 kg/hr
95
F z xB
Then,
D
Then,
Lo D
xD
2699.328 .0963
xB
1489.93 kg/hr
.911 .0963
Q D ho
H1
1
2, 065,113
1489.98 54 285
1 5.0
Now do usual McCabe-Thiele analysis using molar units. Note L o D is the same in mass
and molar units.
L
L
L
L D
Top Operating Line:
y
x 1
x D and
V
V
V 1 L D
L
5
; x
y
xD
.8, y int ercept x
V 6
Feed Line: Goes through y = x = z = .32
Weight fraction of feed = .546. Then, h f
q
HV
hF
430.7 15
HV
hL
430.7 69
Bottom Operating Line:
y
x
L
V
V
intersection top operating line and feed line.
L
1
V
15 kcal/kg, H v
1.149 Slope
L
0
xD
1
5
6
.8
430.7, and h1k1
q
1.149
q 1
1.149 1
1 x B . Goes through x
.133
69 .
7.711
y
x B and
From Figure need about 8 equilibrium contacts including a reboiler. Stage 1 above reboiler is the
optimum feed stage location.
96
4.D21. Feed 1: q1
Feed 2: q 2
Top:
0 , slope feed line = 0
0.9 , slope
q2
q2 1
L
L D
1.375
V
1 L D
2.375
Goes through y
x
0.9 0.1
L
0.579 , y
V
x D , When x = 0, y
1
Since F1 is saturated vapor, V
Bottom:
x
9
L
1
L
V
F1
V
xD
xD .
0.40
100 kmoles/hr
L
.1 F2
At feed F2
D
B
V
0.1F2
L
L 0.9 F2
100 8 108
V
.9 F2
L
V
L V V
0.579 108
62.532
V L 108 45.46
F1 F2 D 100 80 45.46 134.532
But B is saturated liquid.
Check
L L .9F2
L B 134.532
62.532 0.9 80
134.532, OK
Draw top op line. Intersects with F2 feed line. Then draw bottom op line with slope
L V 1.3453 .
Intersection bottom op & q. line gives x B
Check
F1z1
F2 z 2
Dx D
B
Check External MB
180 F1
F1z1
F2 z 2
F2
x B or x B
D B
Dx D
0.09 .
20 36 43.187
134.532
0.095 , OK
45.46 134.53 179.99 , OK
Bx B
56 20.0 36.0 45.46 0.95
134.53 0.095 55.97 OK
See McCabe-Thiele diagram: Optimum feed = 5, 7 equilibrium stages (6.65) more than
sufficient. fraction
ab/ac 0.65
97
4.D22*. Around top of column mass balances are: L D
Solving,
L
0.75, y x
0
x
D
yD
Vy Cx W
C
xw
V
V
V
For pure entering water, x W 1.0 . With saturated liquid entering, L = C. Then from overall
balance, V = D. Thus L/V = C/D = ¾ and D/V = 1.0. Operating equation becomes
y 0.75x .92 .75 0.75x .17
Slope
y
V C and Lx Dy D
0.17, y x 1
0.92
yD , y
x
0.68
Not y D
98
4.D23*.
Note L/V ≠ C/D since C is subcooled. Let c = amount condensed. The energy required to
heat stream W to the boiling point must come from this condensation. That is,
H h c h hW C
c
h
hW
Cp
C
T
C
18 212 100
H h
L C c 1.1154C
V D c D 0.1154C
17465.4
In addition, C/D = ¾ or D/C = 4/3.
L
1.1154C
1.1154
0.1154C
1.1154
0.77
V D .1154C 4 3 .1154 4 3 .1154
This compares to L/V = 0.75 if entering water is a saturated liquid. Very little effect since λ is very large.
L
L D
3.25
0.7647
V 1 L D 4.25
Goes through
y
x
When
x
0, y
1 L V yD
L
L
Bottom Op Line:
y
V
yD
x
0.85
V
0.20
1 xB
Through
y x x D 0.05 and intersects top op line @ feed line
Opt. Feed is #4 below partial condenser – see diagram. Need 6 equil stages + P.C. (an equil.
contact)
Note – Commercial columns usually operate much closer to minimum reflux ratio and have
many more stages.
b.)
L V
0.85 0.376
min
0.85 0
0.558 ,
L V
L
D
min
1
Min
L V
1.26
Min
c.) Total reflux 5 stages + PC sufficient or
4 3 4 equil contacts + PC = 5 3 4 eq. contacts
ab 7.6mm
where fraction
0.74 or .75
ac 10.3mm
99
100
4.D25.
a. 99.9% methanol is essentially pure. Pure MeOH boils 64.5°C.
1 fc Lo D
L
Eq. (4-66) 1
where f c CPL TBP Treflux
V2 1 1 f c L o D
For pure MeOH, CPL
CPL
fc
0.07586 16.83 10 5 T , average (40 + 64.5)/2 = 52.25°C
0.084654 kJ gmole ,
0.084654 24.5 35.27
MeOH
35.27 kJ mole , TBP
0.058804 ,
1.058804 1.2
L1
V2
64.5
1
1.058804 1.2
0.5596
101
b.
4.D26.
L
L D
1.2
0.5454 or 2.59% more reflux with 24.5°C cooling!
V 1 L D 2.2
subcooling not important.
a) 50% feed:
q
L L
F, L
L
amt vaporized
Usually
L F 20
1
F
q
1 20
0.05
, Slope =
L F
0.0476
20
20
q 1
1 20 1
1.05
35% feed: Saturated liquid – vertical feed line. Plot both feed lines. The one with lowest
intersection point with equilibrium curve will normally control V B
q
L
min
L V
Find
L V
max
. Then V B
1 0.1
slope
max
b)
0.46 0.1
L V
L V
L
Bot. y
V
y
L
x
1,
x y
V
L
V
x
3
V
L
min
1
V
2.497 ,
V B
B
1
min
2.497 1.0
0.6681
2.0043
min
V B
V B 1
3.0043
V
V B
2.0043
L V x B or x
1
max
V
1 x B . Goes through y
1
L V
x
1
1.49892
slope
x B with total reboiler
L V 1 xB / L V
1
1
1 0.49892 0.1
0.6338
1.49892
Intersects feed line with 50% feed first.
Middle operating line: Do mass balance around bottom of column. Mass balance intersects
streams L & V (in column), F50% and B.
yV L x F50% z50% Bx B
y
L
x
F50 z 50
Bx B
V
V
Intersects bottom operating line & 50% feed line.
@ x 0, y (F50 z 50 Bx B ) / V , Slope
q 50
For 50% feed,
L V
0.05 (L L ) / F50 .
External balances: 250 F1 F2 D B and F1z50 F2 z35 Dy D Bx B
Find D = 103.333 and B = 146.666 moles/min
Since
V B 2.0034, V 293.96 and L V B 440.63
Then from q 50% : L
V
L
F50
B
q 50 F50
L
0.05 100
445.63 100 146.666
440.63
398.964 , Slope
445.63
L V
1.11698
y intercept (x = 0), y
[ 100 .5
146.666 0.1 ] / 398.964 0.0885
Top Intersects feed line for 35% feed and middle op. line and goes through
y x y D 0.85
102
EQ
Stages
0.75 = E ML =
actual change liquid
actual
op
change at equilibrium
eq. change
Figure for 4D26
103
4.D27*.
y
Top Op. Eqn:
L
V
x
1
L
L D
1
V
1 L D
2
L
L
L F
L
V
xD
, y intercept
1
F
4
F
1
L
V
L
xD
q
.46, y
x
xD
.92
54
5 , y x z .48
14
Bx B
L
Middle: V B L S , V y Bx B L x Sy s y s 0 or y
x
V
V
Does not intersect at y x x B or at y 0, x x B . Does intersect top op. line at feed line.
Need another point.
L V B V B 1 1.5
L
L
Bottom:
3, y x x B 0.08
y
x
1 xB ,
V
B
V B
.5
V
V
The steam is another feed to the column: Sat’d vapor q = 0, q/(q-1) = 0, y = x = z = ys = 0.
Middle Op. Line intersects this steam at bottom op. line (see figure).
Feed: q
F
5 4 , slope
q 1
This problem is a two-feed column with the lower feed (steam) input at a non-optimum feed
stage. Otimum feed is 3rd above partial reboiler. Need 5.6 equilibrium stages plus PR.
This problem was 4.D35 in 2nd edition.
L
L
Stripping Section: y
x
1 xB, y x xB
V
V
4.D28.
0.02 . Feed line is vertical
104
L V
1.0 0.02
max
0.81 0.02
V
B
1
Op line y
1.24,
1, x=
1.5
L
V
V
B
1 xB
V
B
5800 / 0.675
min
L
6.25, L V
1
.16 .02
1
V
L V
max
1
1
0.24
V B
V B 1
6.25 1
V
V B
6.25
min
L V
1.16
Overall Balance: 10,000 = F = D + B
6000 Fz Dy D Bx B D .695
D
V
4.167
1.16
0.865 . Intersection Op & feed lines is y D
B .02
6000 .695D .02D 200
8592.6 kgmoles/day, B 1407.4 . Need a use for impure distillate.
Figure for 4.D28
105
4.D29.
L D
3,
L
3 4,
L
1
1
xD
V
V
4
Step off 3 stages on top op line. Find x S
on middle op. line
0.9
0.225
0.76 . Point on top op line at x S
0.76 is also
xD
3
xs, S = 15
V´
F = 100
L´
F=D+B+S
6
z = .6
Fz
Dx D
Bx B
Sx S
Solve simultaneously D = 50.125, B = 34.875
10
x6 = .1
In top:
L = 3D = 150.375 and V = L + D = 200.500
Since saturated liquid withdrawn, V´ = V = 200.500
and L´ = L – S = 150.375 – 15 = 135.375
L V
Middle op. line slope
Middle Op line: yV
135.375 200.5
L x Sx S
y
L
V
x
0.6752
Dx D
Sx S
Dx D
V
Feed z = 0.6, 20% vapor = 80% liquid
Feed line slope q q 1 0.8 0.4
, when x
0, y
11.4 45.1125
200.5
0.2819
q = 0.8.
4
106
4.D30*.
a. Subcooled Reflux:
c
1
3
Lo
500 ,
Lo
Lo D
3
V1
1 Lo D
4
L1
V2
Substituting in values, we have
Step off two stages.
x2
, L1
4 Lo 3
1
V1
Lo
3
L1
1.0
L2
0.62
1 14
xS
4
3
1
Lo
c and V2
V1
c
L o V1
1 Lo
3 V1
1
4
54
5
, Top op. line y
x
xD
0.92
yS
107
Mixed feed to column: F S
Solving for mixed feed, z M
FM
h F (sat’d vapor), h FM
External Balances: F = D + B, Fz
Lo
3D
Middle: L
1500, and L
L S
FM z M
0.52667
Energy balance for mixed feed, Fh F
Since H s
1500 , Fz SyS
4
3
Lo
SHS
HS
Dx D
FM H FM
h F (sat’d vapor), and q FM
0 (horizontal).
Bx B , Solving simultaneously D = 500 & B = 500
2000 (subcooled reflux), V
2000 500 1500 , V
V
L D
2500
L
1500
3
V
2500
5
2500 , Slope
.6
Intersects Top Op. line at x S
Plot Bot. from y x x B to intersection feed line and middle
Step off stages (see figure). Need 4 8/9 equilibrium stages.
b. Mass balances for mixed feed injection: V FM
V
V
FM
V
2500 1500 1000 , V B 1000 500
2
4.D31*. Was problem 4.D36 in 2nd edition. Solution is trial & error. Need to pick L/V. Final answer
shown in figure.
L .63 .385 0.245
.389
V
.63
0.63
L V
L 0.389
.636
1 L V D 0.611
Note feed stage is not optimum.
108
Figure for problem 4D31
External Balance: F = B = 50, and Fz
4.D32*.
4.D33*. a.
L V
.75 .452
min
L
b.
L D
act
L V
min
0.4 .
0.659
1 L V
1.318. L V
0, x
min
L D
1 L D
Top operating Line through y
Bottom through y
z
0.397 (tangent pinch)
.75
D
Bx B . Thus x B
yB
x
0.569
yD
0.75
0.1 and intersection feed and top operating lines.
L L F .25F, q 5 4, slope q q 1 5
Optimum feed is 3rd from bottom. Need 9 real stages plus partial condenser (see figure).
c. From figure slope of bottom operating line L V 2.025
Feed:
Since saturated steam and CMO valid, B S L V
Also have mass balances, S + F = B + D
SyS Fz Bx B Dy D ys 0
Solve 3 eqs. simultaneously. S = 760 lbmoles/hr = 13,680 lb steam/hr.
109
4.D34*.
Trial and Error, Feed: L
L F F 2, q
3 2, Slope
3.
Figure for 4.D34
4-E1.
Find (L/V)min (see diagram)
0.95 0.613
L V min
0.95 0
0.3547 ,
L V min
L
D
min
1 L V min
0.5497
110
L
D
L
2
1.0994 ,
D
act
min
External M.B. F = D + B, Fz
or Eq. (4.3) D
z
xB
xD
Dx D
F
xB
L
V
L D
act
Bx B
0.6 0.025
0.95 0.025
100
D
L
L
V
V´
62.162
L
h
, B = F – D = 37.838
L D D
68.030
V = L + D = 130.192
F
At feed V
L″
V
kgmol
L
L´
V″
0.5237
1 L D
P=
xP
L
V (sat’d liquid)
L F 168.030
B
Top op line y
1st middle
L
V
x
y
1 L F x D normal . At x = 0, y = 0.4525
L
x
L
1 x B looks like usual bottom!
V
V
Goes through y x x B , and intersection top & feed line.
Slope
L
168.030
1.2906
130.192
At pump-around return, V V 130.192
L L P 208.030, L V
V
208.030 130.192 1.5979
At pump-around removal, V V 130.192 , L L P L 168.030
Check at bottom
L V B or 130.192 168.030 37.838 , OK
L
L
Bottom Op line
y
x
1 x B , Same as first middle!!!
V
V
Step off P.R. stage 1 & 2 above. x P is liquid from stage 2, x P 0.335 . Vertical line at x P is
withdrawal line for pump-around and it is feed-line for return of pump-around. 2nd middle op line
slope L V intersects x P withdrawal & feed line where bottom & 1st middle intersect.
111
Using MB:
yV
When
y
4-E2*. Feed:
q
Px P
0, x
Bx B
P
Bx B
L
V
40
x
P
V
xP
Bx B
V
32838 0.025
.335
0.0690
L
L
208.030
208.030
Draw, 2nd middle – Step off stage 2 & start 3. 3 is op loc. for feed and where pump-around is
returned. Need PR + 6 equil stages. (Actually 5 and a large fraction)
L L
F
xP
Lx, y
, L
L 1.5F, q
3 2 , slope
q
q 1
Bottom op. line: Since steam is saturated vapor S V and B L
Thus, 1 S B L V 1.2 . Operating line goes through y 0, x
3
xB
0.015
Middle op. line: V B Side L S or V L S B Side
V y Bx B
Side x side L x SyS
Since
yS
0 this is, y
L
x
Bx B
Side x side
V
V
Side stream is removed as a saturated liquid so q = 1.
Step off two stages (see figure) and find x side 0.0975
112
Find slope:
V
L
Side B
V
S, B L Side
Side B 1 0.4 1
S
SB
0.833
1.68
slope
Draw in the middle operating line. Step off 4 stages. Trial and error to find x D
for final result).
.85 (see figure
4-E3*. This column has 4 sections. The exact shape is not known ahead of time. Plot top operating line
L
L D
1.86
L
L
0.650, y
x 1
xD
V 1 L D 2.86
V
V
1
L
xD
.35 .8 .28, y x x D 0.8
V
Step off 8 stages and find x S 0.495 yS . Feed line for this vapor is horizontal. Feed line for
feed to column is vertical at z = 0.32. From figure the feed is injected below the liquid
withdrawal and above vapor stream from intermediate reboiler. Can now calculate flows in each
section of columns.
Overall Balance:
Fz Dx D F D x B
113
D
Flows: L
L
D
D
F z xB
xD
.3 1000
xB
.78
385
716.1, V
L D 1101.1 V
L
L S
258.8, L V
L
L
L
V ,V
V
S
643.8
0.235
F 1258.8, L V
1.143
L V 1.955 (this is a check)
To plot: From stage 8 draw line of slope L´/V´. From intersection of first intermediate operating
line and feed line draw line of slope L″/V″. Draw line from intersection of second intermediate operating line with line y y s to y x x B 0.02 . Check if slope L V 1.955 . Optimum
feed is 10th below condenser while vapor from intermediate reboiler is returned on 11 th stage.
Need 12 ½ stages.
Note: Small differences in stepping off stages may change column geometry.
4.E.4. New Problem in 3rd Edition.
External Balance.
a) F D B, Fz Dx D Bx B
D
b)
z xB
xD
xB
F
.25 .025
.9 .025
V B 1.0, V
B
100
25.7 kmol h , B
74.3 kmol h
74.3
L V B 148.6, L V 2.0
At feed, amount condensed = C = F/10 = 10
1
L L F C L F
F 148.6 110
10
V V C 74.3 10 64.3
38.6
114
At stage 2
L
L L R and V
L
L0
64.3
21.4
L
21.4
V
LR
64.3
L L
y
c) Top Op. line:
V
0.333 1 3
38.6 21.43 17.17 kgmoles hour
L
V
LR
x
D
V
D
L0
L
xD
y
V
x, y
x
L
1
V
LR
D
V
L
xD
xD
x D sin ce V
L
LR
D
Envelope for top
V
L
LR
Slope
L V 1 3, y
x
x x D 0.9
L
0,y
1
xD
V
0.6
Plot
L
Middle:
y
Bottom:
y
V
L V x
y
x
Slope
x
1 L V x D . Slope
38.6
64.3
0.600 y
x
xD
0.9
L V 1 xB
xB
L V
V B 1
2
V B
Now have somewhat redundant information.
Can plot bottom.
Intersection bottom and feed line should also be on middle. – Or use this pt to find middle or
bottom op. line.
From graph: Opt. Feed = #4.
Need 6 stages + P.R.
115
Graph for 4.E.4.
4.E.5. New Problem in 3rd Edition.
Bot. Op. Line:
External M.B.: F
D
y
V B
At feed stage:
L
687.5
V
937.5
V B
V
V
x
V
L
V
D B and Fz
250 kmol day , B
L
L
L
V
1
2.25
9 4
9
V B
1.25
54
5
1 xB, y
Dx D
x
Bx B ,
750 kmol day , V
x B , Slope
D
F
z xB
xD
xB
V B B
L V
.3 0.10
.2
1
0.90 0.10
.8
4
1.25 750
937.5 kmol day
937.50 750 1687.5 kmol day
V
V
937.5, L
L
F or L
L F 1687.5 1000
687.5
0.733333
116
MB:
L x Dy D
V y, D
V
L , y
L
Top op. line:
y
L
V
x
L
1
S
L
V
487.5, V
yD
V
1
L
yD
V
V
Goes through y x y D , and intersects feed and bot. op. lines.
At side withdrawal: 687.5 L L , V S V or V 937.5 200 737.5
Op line by intermediate condenser: L D V S
Dy D Sx S
L
L x Dy D V y Sx S or y
x
V
V
687.5
Find from intersection L V op line @ y yS plus slope
0.932 or intersection
737.5
top op line and x x S
At side stream feed point: L
x
737.5. Thus,
Can draw, yint ercept
L
487.5
V
737.5
1 .661 .9
0.661
0.305
117
Graph for 4.E5.
4-F1.
970.33
L
V
Since bottoms are very pure h B
HS
H Equil
v
h water @ 212°F
1381.4
1192
(in column)
Extra heat 189.4 Btu/lb
S
B
Since y ≈ x, MW are same
118
Must vaporize material in column.
extra heat MW
189.4
v
S
S
MW
970.33
B
L v, V
0.1952S
S v
L
B v
BS vS
2 0.1952
V
S v
1 vS
1 0.1952
If super heat not included L V
BS
1.837
2 , which is incorrect.
4-F3*. An approximate check is to compare molar latent heats of vaporization. Data is available in
Perry’s and in Himmelblau.
a. See Example 4-4.
b. isopropanol λ = 159.35 cal/g. MW = 60.09, λ = 9.575 kcal/mole. Water λ = 9.72 kcal/mole. CMO is OK.
c. CMO is not valid. AA 5.83 kcal / gmole, W 9.72
d. nC4. λ = 5.331 kcal/mole, MW = 58.12. λ = 0.0917 kcal/g
nC5. λ = 6.16 kcal/mole, MW = 72.15. λ = 0.0854 kcal/g
Constant mass overflow is closer than constant molar overflow.
e. benzene. λ = 7.353 kcal/mole, MW = 78.11, λ = 0.0941 kcal/g
toluene. λ = 8.00 kcal/mole, MW = 92.13, λ = 0.0868 kcal/g
CMO is within about 6%.
4G1.
a*. Answer should be close, but not identical, to result obtained in Example 4-4.
4G2.
Was 4.G4 in 2nd edition. Used Peng-Robinson. QC
QR
44, 437,300 Btu/hr,
49,859, 400 Btu/hr.
Optimum N F
17 & N
27 (Total condenser is #1)
x D 0.9992 and x B 0.00187 .
4G3*. See answers to selected problems in back of book.
4.H.1. New Problem in 3rd Edition. Use VBA program in Appendix B of Chapter 4.
xd
0.995
xb
0.011 F
250
z
0.4
L/D
3
q
0
feed stg 4
partial reboiler
total condenser
Ethanol-water
Prob. 4H1.
VLE 6th 5th
4th
3rd
2nd
1st
constant
-24.75
85.897
-118.03 82.079 -30.803 6.6048
0
yeqatxint 0.584177 yint
0.4
xint
0.2016667
stage
x
y
1
0.011
0.069033
2
0.039445 0.217358
3
0.112146 0.451872
4
0.227091 0.607193
5
0.477924 0.769849
6
0.694798 0.867005
7
0.824341 0.919132
8
0.893842 0.954863
9
0.941484 0.979257
119
10
11
0.974009 0.992216
0.991288 0.996557
4.H.2. New Problem in 3rd Edition. The VBA program is in
the result is:
xd
0.7
xb
0.0001 F
1000
L/D
6.94
q
0
partial reboiler
total condenser
Ethanol-water
VLE 6th 5th
4th
3rd
2nd
1st
-47.949 161.42
-212.43 138.68 -46.65 7.9322
yeqatxint 0.099219 yint
0.1
xint
0.0135447
stage
x
y
Reflux rate too low Reflux rate too low
Appendix B of Chapter 4. With L/D = 6.94
z
0.1
feed stg 28
Prob. 4H3.
constant
0
With L/D = 6.95 the result is given below. With feed stages below 85 the feed stage was too low.
xd
0.7
xb
0.0001 F
1000
z
0.1
L/D
6.95
q
0
feed stg 85
partial reboiler
total condenser
Ethanol-water
Prob. 4H3.
VLE 6th 5th
4th
3rd
2nd
1st
constant
-47.949 161.42
-212.43 138.68 -46.65 7.9322
0
yeqatxint 0.100057 yint
0.1
xint
0.0136691
stage
x
y
1
0.0001
0.000793
2
0.000194 0.001538
3
0.000295 0.002338
4
0.000404 0.003197
5
0.000521 0.004117
6
0.000646 0.005102
7
0.000779 0.006154
8
0.000922 0.007277
9
0.001075 0.008472
10
0.001237 0.009742
11
0.00141 0.011089
12
0.001593 0.012515
13
0.001786 0.014021
14
0.001991 0.015608
15
0.002206 0.017276
16
0.002433 0.019025
17
0.00267 0.020853
18
0.002919 0.022758
19
0.003178 0.024739
20
0.003447 0.026791
21
0.003725 0.02891
22
0.004013 0.03109
23
0.004309 0.033327
24
0.004613 0.035613
25
0.004924 0.037941
26
0.00524 0.040302
27
0.005561 0.042689
28
0.005885 0.045091
120
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
0.006211
0.006538
0.006865
0.00719
0.007513
0.007831
0.008144
0.00845
0.00875
0.009041
0.009323
0.009595
0.009858
0.010109
0.01035
0.010579
0.010797
0.011004
0.0112
0.011384
0.011558
0.011721
0.011874
0.012018
0.012151
0.012276
0.012392
0.0125
0.0126
0.012693
0.012779
0.012858
0.012932
0.012999
0.013062
0.01312
0.013173
0.013222
0.013267
0.013308
0.013346
0.013381
0.013413
0.013442
0.013469
0.013494
0.013516
0.013537
0.013556
0.013573
0.0475
0.049907
0.052301
0.054674
0.057017
0.059321
0.061579
0.063782
0.065925
0.068002
0.070008
0.071938
0.07379
0.075561
0.077251
0.078857
0.08038
0.08182
0.083179
0.084459
0.085661
0.086787
0.087841
0.088826
0.089743
0.090598
0.091392
0.092129
0.092812
0.093445
0.09403
0.094571
0.09507
0.095531
0.095955
0.096346
0.096705
0.097036
0.09734
0.09762
0.097876
0.098112
0.098328
0.098526
0.098708
0.098874
0.099027
0.099167
0.099295
0.099412
121
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
0.013589
0.013604
0.013617
0.013629
0.013641
0.013651
0.01366
0.013665
0.013706
0.014018
0.016416
0.034534
0.155188
0.490181
0.646064
0.099519
0.099618
0.099707
0.09979
0.099865
0.099934
0.099997
0.100032
0.100305
0.102401
0.11824
0.223718
0.516574
0.652848
0.724878
4.H.3. New Problem in 3rd Edition. The Spreadsheet is:
xd
0.7
xb
0.0001
F
1000
z
0.17
Multiplier 1.05
q
0.5
feed stg 17
partial reboiler
total condenser
Ethanol-water
Problem 4.H4.
VLE 6th 5th
4th
3rd
2nd
1st
constant
-47.949 161.42
-212.43 138.68
-46.65
7.9322
0
L/Dmin 1.687377 L/Vmin 0.62789 L/D
1.771746 L/V
0.639217
stage
x
y
1
0.0001
0.000793
2
0.000229 0.001812
3
0.000418 0.003309
4
0.000696 0.0055
5
0.001104 0.008697
6
0.001698 0.013331
7
0.002559 0.019994
8
0.003797 0.029452
9
0.005555 0.042644
10
0.008006 0.060585
11
0.01134 0.08415
12
0.015719 0.113686
13
0.021208 0.148522
14
0.027681 0.186647
15
0.034766 0.224911
16
0.041877 0.259918
17
0.048382 0.28916
18
0.057276 0.325158
19
0.113592 0.469947
20
0.340102 0.575494
21
0.505222 0.659654
22
0.636883 0.719124
Because the multiplier is close to 1.0, this answer is very sensitive to the data fit used.
One solution to the coding is the following VBA program:
Option Explicit
122
Sub McCabeThiele()
' Find minimum reflux ratio assuming it occurs at feed plate. Then
' L/D actual = L/D min times Multiplier. Steps off stages from the bottom up.
' Assumes that the feed stage is specified.
Sheets("Sheet2").Select
Range("A8", "G108").Clear
Dim i, feedstage As Integer
Dim D, B, xd, xb, F, z, q, LoverD, LoverV, x, y, xint, yint, yeq As Single
Dim a6, a5, a4, a3, a2, a1, a0, L, V, LbaroverVbar, LoverDmin As Single
Dim LoverVmin, LoverVdelta, Multiplier As Single
' Input values from spread sheet
xd = Cells(1, 2).Value
xb = Cells(1, 4).Value
F = Cells(1, 6).Value
z = Cells(1, 8).Value
Multiplier = Cells(2, 2).Value
q = Cells(2, 4).Value
feedstage = Cells(2, 8).Value
' Fit of equilibrium data to 6th order polynomial to find y. a6 is multiplied
' by x to the 6th power.
a6 = Cells(5, 1).Value
a5 = Cells(5, 2).Value
a4 = Cells(5, 3).Value
a3 = Cells(5, 4).Value
a2 = Cells(5, 5).Value
a1 = Cells(5, 6).Value
a0 = Cells(5, 7).Value
' Calculate intersection point of two operating lines and use this to find
' minimum L/D and L/V. Initialize
LoverV = 1
LoverVdelta = 0.00001
Do
LoverV = LoverV - LoverVdelta
xint = ((-(q - 1) * (1 - LoverV) * xd) - z) / (((q - 1) * LoverV) - q)
x = xint
yint = LoverV * xint + (1 - LoverV) * xd
' Equilibrium y at value of x intersection. When yint=yeq, have minimum L/V and L/D.
yeq = a6 * x ^ 6 + a5 * x ^ 5 + a4 * x ^ 4 + a3 * x ^ 3 + a2 * x ^ 2 + a1 * x + a0
Loop While yint < yeq
'Print intersection and equilibrium values.
LoverVmin = LoverV + LoverVdelta
LoverDmin = LoverVmin / (1 - LoverVmin)
LoverD = Multiplier * LoverDmin
LoverV = LoverD / (1 + LoverD)
Cells(6, 2).Value = LoverDmin
Cells(6, 4).Value = LoverVmin
Cells(6, 6).Value = LoverD
Cells(6, 8).Value = LoverV
' Calculate flow rates and ratios.
D = ((z - xb) / (xd - xb)) * F
L = LoverD * D
123
V=L+D
LbaroverVbar = (LoverV + (q * F / V)) / (1 - ((1 - q) * F / V))
' Step off stages from bottom up. First stage is partial reboiler. Initialize
x = xb
i=1
' Loop in stipping section stepping off stages with equilibrium and operating eqs.
Do While i < feedstage
y = a6 * x ^ 6 + a5 * x ^ 5 + a4 * x ^ 4 + a3 * x ^ 3 + a2 * x ^ 2 + a1 * x + a0
Cells(i + 7, 1).Value = i
Cells(i + 7, 2).Value = x
Cells(i + 7, 3).Value = y
i=i+1
x = (y / LbaroverVbar) + (LbaroverVbar - 1) * xb / LbaroverVbar
Loop
' Calculations in enriching section continues to Loop While y < xd.
Do While y < xd
y = a6 * x ^ 6 + a5 * x ^ 5 + a4 * x ^ 4 + a3 * x ^ 3 + a2 * x ^ 2 + a1 * x + a0
Cells(i + 7, 1).Value = i
Cells(i + 7, 2).Value = x
Cells(i + 7, 3).Value = y
i=i+1
x = (y / LoverV) - (1 - LoverV) * xd / LoverV
If x < 0 Then
Cells(i + 7, 4).Value = "Feed stage too low"
Exit Do
End If
If i > 100 Then
Cells(i + 7, 6).Value = "Too many stages"
Exit Do
End If
Loop
End Sub
124
SPE 3rd Ed. Solution Manual Chapter 5
New Problems and new solutions are listed as new immediately after the solution number. These new
problems are: 5A15, 5C1, 5D1, 5D2, 5D9, 5D10, 5H1 to 5H5. Problems and solutions from the first
edition that were not in the second edition are: 5D6, 5D8, 5D11-5D13, 5E1.
5.A6.
Ethane is less volatile than methane so it decreases toward distillate. At bottoms it is more
volatile than propane and butane, so must decrease towards bottoms. Thus ethane
concentrates within column.
5.A7.
1. c; 2. c; 3. a (saturated liquid feed); 4. c; 5. B
5.A9.
Pure LK cannot be withdrawn because LNK is present. Pure LNK can be removed at
distillate if all LK is removed in side stream. However, recovery of LNK will be < 100%.
5.A13.
If z HNK F
cross.
(frac. rec. HK in bot) z HK F, then there is more HNK in bottoms and curves
5A15. New Problem in 3rd Edition. a. a, b. d, c. b, d. c, e. b.
5.C1. New Problem in 3 rd Edition. Start with equilibrium equation, yi,j = Ki,jxi,j and multiply right hand
side by Kref,j /Kref,j. One obtains yi,j = αi-ref,j Kref,jxi,j. Then 1 = Σ y = Σ (α i-ref,j Kref,jxi,j) . Since Kref,j is
constant, bring it outside the summation and solve for Kref,j = 1/ Σ (αi-ref,j xi,j). This is Eq. (5-29).
125
5.D1. New Problem in 3rd Edition.
Dx M ,d
a)
Dx B,d
1.00 2, 000 0.19
2280
0
0
Dx E,d
0.978 2, 000 0.31
Dx P ,d
1 0.994 12, 000 0.27
D
3638.16
x i,d D
19.44
5937.6 kg/h
b) assume NK (Methanol and n-butanol) do not distribute (all
methanol in top and all butanol in bottom).
wt frac. in distillate: M = 0.38399, E = 0.61273, P = 0.00327, B = 0.0.
wt. frac
Bx M ,B
0
Bx B,B
1.0 12, 000 0.23
Bx E ,B
1 0.978 12, 000 0.31
Bx P ,B
0.994 12, 000 0.27
x i,b
0
B
0
2760.0
0.4553
81.84
0.0135
3220.56
0.5312
x i,b B 6062.4 kg hr
Check B+D=F, OK.
5.D2.
New Problem in 3rd Edition.
y4
yi P
Raoult’s Law
Antoine’s Eqn.
log10 VP
Dew Point condition is
xi
yi P
VPi
0.30, y 5
xi
A
0.5, y 6
0.20, P
760 mmHg
VPi x i
B
T C
1
(from Raoult’s Law)
126
B
(from Antoine’s Eqn)
T C
Combine with Dew Point condition
y5P
y6P
y4P
1
B
B
B
VPi
10
A4
10 A
4
T C4
10
0.30 760
10
6.809
5
A5
T C5
10
A6
6
T C6
0.50 760
935.86
T 238.73
10
6.853
0.20 760
1064.8
T 233.01
10
6.876
1171.17
1
T 224.41
Using Goal Seek in Excel, T = 41.3ºC
5.D3.
Assume that ethanol is HK. Then assume that HNK’s are totally in the bottoms.
x M,dist .99, x E,dist .01
2195.6 = (.998) (0.22) (10,000) = Dx MD
D
2195.6
2195.6
2217.78 and B
x MD
.99
Bottoms: MeOH: .0021 (.22) (10,000) = 4.4
4.4
x Mbot
0.0006
7782.22
1.0 .18 10, 000
x n propanol,bot
0.2313
7782.22
1.0 .13 10, 000
x n butanol,bot
.1670
7782.22
x EtOH,bot 1 x MeOH,bot x n p,bot x nbut,bot 0.6011
5.D4.
a. .99 F z C5
F D
7782.22
D x C5,dist (1), and .01 Fz C5 =B x C5,bot (2)
.98 F z C6,bot
Bx C6,bot (3), and .02 F z C6 D z C6,dist (4)
Assume all heptane in bottoms
Fz C7 Bx bot,C6 (5), x dist,C7 0 (6)
Take Eqs. 1, 4 & 6: .99 (1000) (.4) = Dx C5d
.02 (1000) (.3) = D x C6d
0 = D x C7,dist
Dx l,dist
b.
D
402 kg moles/hr
B = F – D = 1000 – 402 = 598
x C7,dist 0
x C5,d
x C6,d
.99 1000 .4
0.9851
402
1 0.9851 0.0149
127
x C7,bot
1000 .3 1.0
598
.98 1000 .3
x C6,bot
c.
5.D5.
0.5017
0.4916
598
x C5,bot 1 .5017 .4916 0.0067
L = (L/D)D = (2.5) (402) = 1005
V = L + D = 1005 + 402 = 1407
At feed stage: L = L + .6F = 1005 + 600 = 1605
V = V - .4F = 1407 – 400 = 1007
Assume all methanol and ethanol in distillate.
Dx MeOH,dist
0.55 100
0.01 150
Dx EtOH,dist
0.21 100
Dx prop,dist
0.993
Dx bu tan ol,dis
0.03 150
0.23 100
1 0.995
56.5
25.5
0.26 150
0.01 100
61.57
0.70 150
0.53
D 144.1
B
Check:
F1
F2
D 105.9
Bx Pr op,bot
1 0.993
Bx but,dist
.23 100 .26 150
0.995 .01 100
0.7 150
0.434
105.47
Check = 105.90
Mole fractions:
x M ,bot
0 , x E ,bot
x but,bot
1 x prop,bot
0.9959
Dx MeOH ,dist
56.5
x M ,dist
x E,dist
x p,dist
x But,dist
0, x prop,bot
D
144.1
25.5
0.1767
144.1
61.566
0.427
144.1
0.53 144.1 0.0037
Check
= 1.000
0.434
105.90
0.0041
0.392
OK
5.D6. This is 8.D1. in 1st ed.
128
129
5.D7.
Assume 100% recovery C 2 , & propylene in distillate.
Assume 100% recovery pentane & hexane in bottoms.
Comp.
Distillate
C2
Propylene:
n-C3
n-C4
C5 & C6
0.3 (1000) + 0.02 (1500)
0.006 (1000) + 0.001 (1500)
(0.991) [1000 (0.45) + 1500 (0.249)]
(0.02) [1000 (0.154) + 1500 (0.40)]
0
Bottoms flow rate = F1
x B,C2
0, x B,propylene
F2
D
x B,C5
0, x B,C3
1000 0.09
= 330
= 7.5
= 816.0885
= 15.08
= 15.08
D=
= 1168.7
.009 1000 0.45
1500 0.18
1331.33
xD
0.2824
0.0064
0.06983
0.0129
0.0
2500 1168.7 1331.3 kg/h
x B,C4
5.D8.
kg/h
1500 0.249
1331.3
.98 1000 .154 1500 .40
1331.3
0.2704,
x B,C6
0.0056
0.5550
1500 .15
1331.31
0.1690
8.D.6. in 1st edition. Assume all benzene is in the distillate.
130
131
5.D.9. New Problem in 3rd Edition.
132
5.D10. New Problem in 3rd Edition. At the bubble point
x C5
.40 , x C6
.60 , p
yi
760 mmHg , y C5
1.0
y C6
K 5 x C5
K 6 x C6
1.0
133
or
VPC5
Ptot
x C5
0.40 10
TºC
20
VPC6
Ptot
6.853
1.0 , VPC5 x C5
x C6
1064.8
T 233.01
0.60 10
(C5 term) x (.4)
441.03 × .4 = 176.4
6.876
VPC6 x C6
Ptot
1171.17
T 224.41
+
760
C6 term x (.6)
121.387 × .6 =
SUM
249.23
420.28 × .6 = 252.17
760.21
Final result is:
51
1270.095 × .4 = 508.04 +
5.D11. Was problem 6.D2 in 2nd edition SPE. Since x i known, want
yi
1
K i p BP x i
K ref p old
Find new pressure from, K ref p new
Kixi
Use ethane, or n-pentane as reference.
First guess: Try
K C5 1.0, p 115 kPa
K NC7
0.13
Ki xi
K C2
29 0.1
K rep p new
Ki xi
K C5 p new
29
1.0 .35
0.13 .55
1.0
~ 0.3
p new
3.32
8.0 0.1
0.3 .35
3.32 p too low.
440 kPa , K NC7
0.042 0.55
0.042
K C2
8.0
0.927
0.3
.032
p new 400 kPa, K nC7 0.045
K C2
0.927
K i x i 8.7 0.1 0.32 0.35 0.045 0.55 1.004
8.7
Answer (within accuracy DePriester Chart) = 400 kPa
5.D12. Was problem 6.D3 in 2nd edition SPE. a. Highest B.P. Temp. is pure n-octane. K C8
b. Lowest B.P. Temp. is pure n-hexane. K C6
1.0, T 174 C
1.0, T 110 C
5.D13. Was problem 6.D6 in 2nd edition SPE. Let 1 = n-butane, 2 = n-pentane and 3 = n-hexane. p = 101.3 kPa.
Bubble Point: First guess. K1 1 at T
1 , K 2 1 at T 36 , K 3 1 at T 68 .
Tfirst
K1
z1T1
3.6, K 2
.2
1
1.08, K 3
.5 36
0.36.
Choose 2 as ref. Eq. (6-14) is: K 2 Tnew
Tnew
29 C. K1
2.7, K 5
Eq. (6-14) is: K 2 Tnew
Tnew
28.8 K1
K1x1
38
.2 3.6
1.8 1.368
0.26, and
0.789 1.013
2.7, K8
.3 68
Kixi
.5 1.08
.3 .36
1.368
0.789
1.013
0.779
0.255, and
Kx
i i
1.006. OK. TBP
28.8 C.
5. E1. This is 8.E4. in 1st edition.
134
135
136
5.H1. New Problem in 3rd Edition. Same program as 5.H5 except do not list y values as distillate.
Different input in spreadsheet – see below.
Ternary Distillation: Constant relative volatility. Step off stages from bottom up. Use whole stages.
System has A = LK, B = HK and C = HNK
C5H9
alpha
Alpha CA-B
3.58 alpha B-B
1.86 B
1 feedstage
8
zA
0.35 z B
0.4 z C
0.25 epsilon (values for
0.00000001
N loop(
F
200 q
1 L/D
6 convergence
100
df(HNK frac
frac rec B in dist
0.996 guess frac rec C bot
1 recovery)
0.9
frac rec A in dist
0.961
D
67.59011 B
132.4099 L/V
0.857143 Lbar/Vbar
1.279858988
Mass balance
xAdist
0.995264 xBdist
0.004734 xCdist
1.56E-06 values
Mass balance
xAbot
0.020618 xBbot
0.601768 xCbot
0.377614 values
137
Stage by stage calculations
i xA
yA
1 0.020618
2 0.041225
3 0.072406
4
0.11662
5 0.175066
6 0.245778
7 0.322624
8 0.396885
9 0.515565
10 0.633439
11 0.738112
12 0.822076
13 0.883953
14 0.926687
15 0.954865
16
0.97287
17 0.984143
18 0.991109
0.046992
0.0869
0.143487
0.218289
0.308791
0.407144
0.502187
0.584094
0.685129
0.774848
0.846817
0.899855
0.936484
0.960636
0.97607
0.985732
0.991702
0.995362
xB
yB
xC
yC
0.601768 0.7125981 0.377614
0.688364 0.7538807 0.270411
0.720619 0.7419438 0.206975
0.711292 0.6917342 0.172088
0.672062 0.6158891 0.152873
0.612801 0.5274175 0.141421
0.543675 0.4396808
0.1337
0.475123 0.3632905 0.127992
0.42305 0.2920855 0.061385
0.339977 0.2160685 0.026583
0.251291 0.1497869 0.010597
0.173962
0.098934 0.003962
0.114634 0.0630978 0.001413
0.072825 0.0392226 0.000488
0.044971 0.0238835 0.000164
0.027075 0.0142529 5.45E-05
0.015839 0.0082925 1.77E-05
0.008886 0.0046363 5.57E-06
0.240409437
0.159219617
0.114569647
0.089976459
0.075319919
0.0654388
0.058132319
0.05261578
0.02278591
0.009083172
0.003395923
0.001211305
0.000418127
0.000141178
4.69552E-05
1.54307E-05
4.9941E-06
1.56158E-06
Calc frac recovery C in bottoms
0.9999979 j
5.H2. New Problem in 3rd Edition. The spreadsheet is,
Ternary Distillation with Constant relative volatility. Step off stages from top down.
System has A = LNK, B = LK and C = HK
alpha A-B 2.25
alpha B-B 1
Alpha C-B 0.21
feedstage
zA
0.25
zB
0.35
zC
0.4
epsilon (values for
F
100
q
1
L/D
0.3
N loop( convergence
frac rec B in dist
0.9
frac rec C in bot
0.97
df(LNK frac recovery)
Guess: frac rec A in dist
1
D
57.66689 B
42.35298 L/V
0.230769 Lbar/Vbar
xAdist
0.43295 xBdist
0.546241 xCdist
0.020809 Mass balance values
xAbot
0.001251 xBbot
0.082639 xCbot
0.91611 Mass balance values
Stage by stage calculations
i xA
yA
xB
yB
xC
yC
1
0.229688 0.43295 0.65203 0.546241 0.118282 0.020809168
2
0.180904 0.386044 0.601681 0.570654 0.217416 0.043302907
3
0.16005 0.374786 0.537147 0.559034 0.302804 0.066179941
4
0.147137 0.369973 0.486906 0.544142 0.365957 0.085884852
5
0.13893 0.366993 0.453607 0.532548 0.407464 0.100458716
6
0.133981 0.365099 0.433372 0.524864 0.432647 0.1100371
7
0.062603 0.208987 0.425676 0.631573 0.511721 0.159440004
8
0.021494 0.097273 0.308019 0.619528 0.670486 0.283199293
9
0.004909 0.032934 0.146011 0.435383 0.84908 0.531682943
10
0.000766 0.006976 0.044919 0.181823 0.954315 0.811200627
Calc frac recovery A in distillate
0.998702 j
Note x1 =
xbot
3
6
0.0001
10
0.9
1.565105
Note y1 =
xdist
2
138
5.H.3. New Problem in 3rd Edition. (L/D)min = 0.26761 by trial and error using spreadsheet in Table 5.A1..
5.H.4. New Problem in 3rd Edition.
Ternary Distillation with Constant relative volatility. Step off stages from top down.
System has A = LK, B = sandwich and C = HK
5.G.e.
alpha A-B 1.4
alpha B-B 1
Alpha C-B 0.7
feedstage
zA
0.25
zB
0.35
zC
0.4
epsilon (values for
F
100
q
1
L/D
5
N loop( convergence
frac rec B in dist
0.583
frac rec C in bot
0.995
df(LNK frac recovery)
Guess: frac rec A in dist
0.95
D
44.10818 B
55.89182 L/V
0.833333 Lbar/Vbar
xAdist
0.532853 xBdist
0.462613 xCdist
0.004534 Mass balance values
xAbot
0.026781 xBbot
0.261129 xCbot
0.71209 Mass balance values
Stage by stage calculations
i xA
yA
xB
yB
xC
yC
1
0.447934 0.532853 0.544443 0.462613 0.007623 0.004534307
2
0.378937 0.462087 0.609404 0.530804 0.011659 0.007108533
3
0.325116 0.40459 0.658055 0.584939 0.016829 0.010471366
4
0.284385 0.359739 0.692247 0.625481 0.023368 0.01477984
5
0.254167 0.325796 0.71427 0.653975 0.031563 0.020228923
6
0.231958 0.300615 0.726286 0.672327 0.041757 0.027058086
7
0.215598 0.282107 0.730061 0.68234 0.054342 0.035552935
8
0.203353 0.268473 0.726901 0.685486 0.069746 0.046040694
9
0.193893 0.258269 0.717703 0.682853 0.088403 0.058877558
10
0.18623 0.250387 0.703059 0.675188 0.110711 0.074425299
11
0.179649 0.244001 0.683384 0.662985 0.136967 0.093014635
12
0.173652 0.238516 0.65905 0.646589 0.167298 0.114894592
13
0.167915 0.233519 0.630501 0.62631 0.201584 0.140170911
14
0.162254 0.228738 0.598352 0.602519 0.239393 0.168742359
15
0.156599 0.224021 0.563437 0.575729 0.279964 0.200250121
16
0.150964 0.219308 0.526798 0.546633 0.322237 0.234059083
17
0.145428 0.214612 0.489617 0.516101 0.364955 0.269286831
18
0.140099 0.209999 0.453098 0.485116 0.406803 0.304884695
19
0.135091 0.205558 0.418339 0.454684 0.446571 0.339758041
20
0.100543 0.157965 0.402362 0.45154 0.497094 0.39049513
21
0.071479 0.116121 0.372448 0.43219 0.556074 0.45168881
22
0.048123 0.080918 0.329669 0.395957 0.622209 0.523124245
23
0.030232 0.05263 0.276757 0.344144 0.693012 0.603226557
24
0.017191 0.03096 0.2177 0.280057 0.765109 0.688982619
Mass balance: fraction stage, A, B, C calculated at bottom, % error B
0.264616 0.026781
0.261129
0.71209 6.65242E-09
Calc frac recovery A in distillate
0.940127 j
4
19
1E-10
100
0.8
1.21119
Note y1 =
xdist
Part d. Fractional recovery of B in distillate. is 0.725. Note that B goes through a maximum of close to
1% on stages 7 and 8.
Ternary Distillation with Constant relative volatility. Step off stages from top down.
System has A = LK, B = trace sandwich and C = HK
5.G.e. Part d.
alpha A-B 1.4
alpha B-B 1
Alpha C-B 0.7
feedstage
19
139
zA
0.38
zB
0.02
zC
0.6
epsilon (values for
F
100
q
1
L/D
4
N loop( convergence
frac rec B in dist
0.725
frac rec C in bot
0.995
df(LNK frac recovery)
Guess: frac rec A in dist
0.99
D
39.37044 B
60.62956 L/V
0.8
Lbar/Vbar
xAdist
0.95555 xBdist
0.03683 xCdist
0.00762 Mass balance values
xAbot
0.00626 xBbot
0.009071 xCbot
0.984668 Mass balance values
Stage by stage calculations
i xA
yA
xB
yB
xC
yC
1
0.934659 0.95555 0.050434 0.03683 0.014907 0.00761993
2
0.909255 0.938837 0.064694 0.047713 0.026051 0.013449322
3
0.878109 0.918514 0.079128 0.059121 0.042762 0.02236485
4
0.839847 0.893598 0.092985 0.070669 0.067168 0.035733649
5
0.793216 0.862987 0.105202 0.081754 0.101582 0.055258739
6
0.737611 0.825683 0.114471 0.091527 0.147918 0.082789801
7
0.673775 0.781199 0.119471 0.098942 0.206753 0.119858439
8
0.604361 0.73013 0.119295 0.102943 0.276345 0.166926476
9
0.53382 0.674599 0.113888 0.102802 0.352293 0.222599678
10
0.467334 0.618166 0.104227 0.098476 0.428438 0.283358088
11
0.409234 0.564978 0.092025 0.090748 0.498741 0.344274648
12
0.361849 0.518497 0.079126 0.080986 0.559026 0.400517103
13
0.325379 0.480589 0.066982 0.070666 0.607639 0.448744495
14
0.298551 0.451414 0.056436 0.060951 0.645013 0.487634893
15
0.279454 0.429951 0.047786 0.052515 0.67276 0.517534464
16
0.266162 0.414673 0.040972 0.045595 0.692866 0.539732259
17
0.257043 0.40404 0.035754 0.040143 0.707203 0.555816779
18
0.250839 0.396745 0.031838 0.035969 0.717324 0.567286133
19
0.246633 0.391781 0.028939 0.032836 0.724428 0.575383054
20
0.193371 0.320667 0.029598 0.035058 0.777031 0.644274899
21
0.145301 0.251
0.029111 0.03592 0.825588 0.713080242
22
0.105056 0.188125 0.027585 0.035283 0.867359 0.776592117
23
0.073452 0.135485 0.025264 0.033287 0.901284 0.831228269
24
0.049874 0.094147 0.022436 0.030252 0.92769 0.875601733
25
0.032959 0.063306 0.019353 0.026552 0.947688 0.910141552
26
0.02117 0.041182 0.016207 0.02252 0.962623 0.93629802
27
0.013123 0.025762 0.013125 0.018405 0.973752 0.955833007
28
0.00771 0.015236 0.010183 0.014373 0.982107 0.970390508
29
0.004108 0.008156 0.007421 0.010525 0.988471 0.981318291
Mass balance: fraction stage, A, B, C calculated at bottom, % error B
0.402462 0.00626
0.009071
0.984668 5.53216E-07
Calc frac recovery A in distillate
0.990012 j
16
1E-10
100
0.8
1.308
Note y1 =
xdist
5.H.5. New Problem in 3rd Edition.
Ternary Distillation with Bubble point Calc. Step off stages from bottom
up.
System has A = LK, B = HK and C = HNK
feedstage 5
zA
0.3
zB
0.3
zC
0.4
epsilon
1E-08
F
100
q
1
L/D
8
N loop
100
frac rec B in bot
0.997
guess frac rec C bot 1
df
0.9
140
frac rec A in dist
K const. aT1
nB=A -1280557
nPen=B -1524891
nHex=C -1778901
aT2
0
0
0
0.995
aT6
7.94986
7.33129
6.96783
Trebguess
ap1
-0.96455
-0.89143
-0.84634
500
ap2
0
0
0
p, psia
ap3
0
0
0
14.7
D
xAdist
xAbot
29.940006 B
0.9969938 xBdist
0.002141 xBbot
70.05999 L/V
0.003006 xCdist
0.42692 xCbot
0.88889 Lbar/Vbar 1.26
2.2E-07
0.57094
stage
1
2
3
4
5
6
7
8
9
10
xA
0.002141
0.0086951
0.0291201
0.0853111
0.214736
0.4743433
0.7600825
0.920961
0.9779073
0.994401
xB
0.42692
0.613018
0.714099
0.717438
0.617813
0.483106
0.233736
0.078451
0.022047
0.005596
xC
0.57094
0.37829
0.25678
0.19725
0.16745
0.04255
0.00618
0.00059
4.6E-05
3.4E-06
yA
0.0103991
0.0361347
0.1069354
0.270011
0.5324156
0.786406
0.9294091
0.980028
0.9946891
0.9986729
Distillate mole fracs = y values
Calc frac recovery C in bottoms
yB
0.6614042
0.7887656
0.7929732
0.6674458
0.4297616
0.2080991
0.0700679
0.0199309
0.0053079
0.0013269
yC
0.3282
0.1751
0.10009
0.06254
0.03782
0.00549
0.00052
4.1E-05
3E-06
2.2E-07
T
582.283
570.622
561.854
551.835
536.481
513.748
498.351
491.769
489.686
489.103
KB
1.549247
1.286692
1.110453
0.930318
0.695617
0.430752
0.299774
0.254057
0.240759
0.237137
0.9986729 0.00133 2.2E-07
0.9999998 j
3
Option Explicit
Sub Ternary_bottom_up_BP()
' Ternary distillation with constant alpha. Frac recoveries of LK and HK given.
' There is a HNK present and its frac rec in bottoms is guessed.
Sheets("Sheet1").Select
Range("A18", "I150").Clear
Dim i, j, k, feedstage, N As Integer
Dim AaT1, AaT6, Aap1, BaT1, BaT6, Bap1, CaT1, CaT6, Cap1 As Double
Dim F, fracBbot, fracCbot, q, LoverD, LoverV As Double
Dim LbaroverVbar, D, B, L, V, Lbar, Vbar, Eqsum, fracAdist As Double
Dim xA, xB, xC, yA, yB, yC, zA, zB, zC, xAbot, xBbot, xCbot As Double
Dim DxA, DxB, DxC, BxA, BxB, BxC, xAdist, xBdist, xCdist As Double
Dim fracCbotcalc, difference, epsilon, df As Double
Dim T, p, Tinit, KA, KB, KC, sum As Double
'Input data
AaT1 = Cells(9, 2).Value
AaT6 = Cells(9, 4).Value
Aap1 = Cells(9, 5).Value
BaT1 = Cells(10, 2).Value
BaT6 = Cells(10, 4).Value
Bap1 = Cells(10, 5).Value
CaT1 = Cells(11, 2).Value
CaT6 = Cells(11, 4).Value
Cap1 = Cells(11, 5).Value
feedstage = Cells(3, 8).Value
F = Cells(5, 2).Value
141
q = Cells(5, 4).Value
LoverD = Cells(5, 6).Value
zA = Cells(4, 2).Value
zB = Cells(4, 4).Value
zC = Cells(4, 6).Value
fracBbot = Cells(6, 3).Value
fracCbot = Cells(6, 6).Value
fracAdist = Cells(7, 4).Value
epsilon = Cells(4, 8).Value
N = Cells(5, 8).Value
df = Cells(6, 8).Value
p = Cells(7, 8).Value
Tinit = Cells(7, 6).Value
' The For loop (remainder of program) is to obtain convergence of guess of
' fractional recovery of A in distillate.
For j = 1 To N
' Calculate compositions and flow rates.
DxA = F * zA * fracAdist
DxB = F * zB * (1 - fracBbot)
DxC = F * zC * (1 - fracCbot)
BxA = F * zA * (1 - fracAdist)
BxB = F * zB * fracBbot
BxC = F * zC * fracCbot
D = DxA + DxB + DxC
B = BxA + BxB + BxC
xAdist = DxA / D
xBdist = DxB / D
xCdist = DxC / D
xAbot = BxA / B
xBbot = BxB / B
xCbot = BxC / B
L = LoverD * D
V=L+D
LoverV = L / V
Lbar = L + q * F
Vbar = Lbar - B
LbaroverVbar = Lbar / Vbar
' Print values of flowrates and mole fractions
Cells(13, 2) = D
Cells(13, 4) = B
Cells(13, 6) = LoverV
Cells(13, 8) = LbaroverVbar
Cells(14, 2) = xAdist
Cells(14, 4) = xBdist
Cells(14, 6) = xCdist
Cells(15, 2) = xAbot
Cells(15, 4) = xBbot
Cells(15, 6) = xCbot
' initialize (reboiler =1) and start loops
i=1
xA = xAbot
142
xB = xBbot
xC = xCbot
T = Tinit
' Calculations in stripping section: equilibrium then operating.
Do While i < feedstage
' Bubble point calculaton
For k = 1 To 10
KB = 1
KA = Exp((AaT1 / (T * T)) + AaT6 + (Aap1 * Log(p)))
KB = Exp((BaT1 / (T * T)) + BaT6 + (Bap1 * Log(p)))
KC = Exp((CaT1 / (T * T)) + CaT6 + (Cap1 * Log(p)))
yA = KA * xA
yB = KB * xB
yC = KC * xC
sum = yA + yB + yC
KB = KB / sum
T = Sqr(BaT1 / (Log(KB) - BaT6 - (Bap1 * Log(p))))
Next k
' Print values
Cells(i + 17, 1).Value = i
Cells(i + 17, 2).Value = xA
Cells(i + 17, 3).Value = yA
Cells(i + 17, 4).Value = xB
Cells(i + 17, 5).Value = yB
Cells(i + 17, 6).Value = xC
Cells(i + 17, 7).Value = yC
Cells(i + 17, 8).Value = T
Cells(i + 17, 9).Value = KB
' Bottom operating line
i=i+1
xA = yA / LbaroverVbar + (1 - (1 / LbaroverVbar)) * xAbot
xB = yB / LbaroverVbar + (1 - (1 / LbaroverVbar)) * xBbot
xC = yC / LbaroverVbar + (1 - (1 / LbaroverVbar)) * xCbot
Loop
' Calculations in enriching section
Do
For k = 1 To 10
' Bubble point calculation
KA = Exp((AaT1 / (T * T)) + AaT6 + (Aap1 * Log(p)))
KB = Exp((BaT1 / (T * T)) + BaT6 + (Bap1 * Log(p)))
KC = Exp((CaT1 / (T * T)) + CaT6 + (Cap1 * Log(p)))
yA = KA * xA
yB = KB * xB
yC = KC * xC
sum = yA + yB + yC
KB = KB / sum
T = Sqr(BaT1 / (Log(KB) - BaT6 - (Bap1 * Log(p))))
Next k
' Print values
Cells(i + 17, 1).Value = i
Cells(i + 17, 2).Value = xA
143
Cells(i + 17, 3).Value = yA
Cells(i + 17, 4).Value = xB
Cells(i + 17, 5).Value = yB
Cells(i + 17, 6).Value = xC
Cells(i + 17, 7).Value = yC
Cells(i + 17, 8).Value = T
Cells(i + 17, 9).Value = KB
' Test for feed stage too low
If xA < 0 Or xB < 0 Or xC < 0 Then
Cells(i + 18, 3) = "Feed stage too low"
Exit For
End If
i=i+1
' Test for too many stages, which may mean reflux rate is too low.
If i > 100 Then
Cells(i + 18, 2).Value = "Too many stages"
Exit For
End If
' Top operating line
xA = yA / LoverV - ((1 / LoverV) - 1) * xAdist
xB = yB / LoverV - ((1 / LoverV) - 1) * xBdist
xC = yC / LoverV - ((1 / LoverV) - 1) * xCdist
' Test for calculations being done.
Loop While yA < xAdist
' Fractional recovery of C based on stage-by-stage calculation.
fracCbotcalc = 1 - (yC * D) / (F * zC)
difference = fracCbot - fracCbotcalc
If Abs(difference) < epsilon Then Exit For
fracCbot = fracCbot + df * (fracCbotcalc - fracCbot)
' Test if have convergence of fractional recovery of C.
Next j
Cells(i + 19, 1).Value = "Calc frac recovery C in bottoms"
Cells(i + 19, 5).Value = fracCbot
Cells(i + 19, 6).Value = "j"
Cells(i + 19, 7).Value = j
Cells(i + 18, 1).Value = "Distillate mole fracs = y values"
Cells(i + 18, 5).Value = yA
Cells(i + 18, 6).Value = yB
Cells(i + 18, 7).Value = yC
End Sub
144
Chapter 6
New Problems and new solutions are listed as new immediately after the solution number. These new
problems are: 6A1, 6A5, 6D3, 6D4, 6G4-6G7.
6.A1. New Problem in 3rd Edition. Trial and error. Try a feed stage and determine the distillate and
bottoms mole fractions of the key components. Repeat for additional feed stages. The feed stage
that produces the best separation is the optimum feed stage for this value of N.
6.A5. New Problem in 3rd Edition. Trial and error. Pick an N that you think is close (a systematic
method to do this is described in Chapter 7). Find the optimum feed stage. If you need more
separation to meet specifications, increase N, and if you exceed specifications, try decreasing N.
For an initial estimate of the optimum feed location for the new N, assume that the ratio
(Optimum feed stage)/(total number of stages) is constant. Continue process until specifications
are met or slightly exceeded.
6.C1. a.
With a side stream, mass balance is,
Vj y j L j x j Sx S Vj 1 , y j 1 L j 1x j
Fjz j
1
where L j is the flow into the stage below, L j
(6-4) to (6-6) are unchanged. Note that the L j
b.
Now L jh j
Lj
Vj
1
Fj h Fj
1
L j x j , Eqs.
input into the matrix will be changed.
L jh j S jh j in the E.B. and
j
D
j
Fk
k 1
k
Substituting into EB we find
DEj
x j . Since L j x j Sx S
L j S, x S
Qj
D hj
j 1
k
1
1
Sk , L j
j
hj
1
SK h j
k
j
1
k
1
Vj
1
1
j 1
D
FK h j
k
1
j 1
k
1
j 1
Fk
k
FK h j
1
Sk
1
SK h j
6.C2. Partial condenser mass balances is:
Dy1 L1x1 V2 y 2 F1z1
This becomes,
DK1
V2
K 2 2 F1z1
1
1
L1
L2
Thus,
B1
1
DK1
L1
, C1
(6-7)
K 2 V2
L2
, and D1
(6-8)
F1z1
Note that only B1 differs.
6.D1.
For n-pentane from Example 6-1, T = 60°C, K C5
Matrix:
L3 1825, L 4 450 B, V2
j = 1 (total condenser),
V3
1.05, L1
V4
L2
825 kmole/hr,
1375.
145
1.05 1375
K 2 V2
C1
L2
j
2, C 2
B2
1
825
j
1
K 3 V3
1.05 1375
L3
1825
V2 K 2
2.75, A 2
L2
j 3, C 3
B3
L4
450
1.791, A 3
L3
1.75
1
2.75
0
6.D2.
1,C5
p = 5 atm: z C2
0
0.791
1
0
1.791
0
to
0.08, z C3
0.33, z C4
yi
1, K C4
5.4 0.08
yi
1.7 0.33
12 , K C2
0
2,C5
0
3,C5
350
4,C5
0
0.49, z C5
0.10
yi
1.0.
506.5 kPa
0.47, K C5
0.47 0.49
Kixi
0.14
0.14 0.10
K C3 20
4.6, K C4
1.7
1.37
1.237
0.35, K C5
1.237
0.10
0.368 0.4521 0.1715 0.0 1.0016 OK
Propane Matrix Analysis: K C3
D3
Fz c3
V2
V3
L1
0
1.7, K C4
K C3 Tnew
Tnew
350
1. DePriester Chart.
5.4, K C3
Need lower T.
0
0
1,C5
x i . Want
Pick C 3 as ref. 5 atm 101.3 kPa atm
Try T = 20°C. K C2
1, D 4
0
4.208
As sat’d liquid & for bp calculate z i
1 Guess: Want K C3
1000 0.35
3.208
1
1.67, D1
825
are in Example 6-1.
4,C5
st
Fz C51
4.208, A 4
L4
1.67
L1
550
3.208
1, D 3
1 V4 K 4
1
0
1.05 1375
V3 K 3
D
1
0.791
1, D 2
K 4 V4
4 Reboiler , B 4
Values for
1.75 , B1
1.37, B
330, D1
V4
L1
D
L3 L 2 F
Total Condenser (1):
D
V5
D2
V6
1025
2025
L4
F D 1000 410
D4
L1
L2
D5
D6
590
L6
0
D 1435
L3
L5
146
B1 1 D L1 1.40, C1
Stage 2.
A2
Stage 3. A 3
1, B2
1, B3
V2 K 2
1
L3
Stage 4:
A4
1, B 4
1
Stage 5:
A5
1, B5
1
Reboiler (Stage 6). A 6
V4 K 4
L5
1, B6
2.918
0
1
1435 1.37
L3
2025
V4 K 4
1435 1.37
L4
2025
V5 K 5
V6 K 6
1435 1.37
V6 K 6
L6
590
0
0
0
0
-0.9708
0
0
0
0
0
0.9708
0
0
1
0
0
0
-1
0
0
0
0
0.9708
0.9708
3.32
=4.32
L6
1.9708
1.918
0.9708
L5
=1.9708, C 5
1
1025
V3 K 3
=1.9708, C 4
L4
Mass balance matrix.
1.40 -1.918
-1
=1.9708, C 3
V5 K 5
1.37 1435
=2.918, C 2
L2
V3 K 3
1
K 2 V2 L 2
1.9708
0.9708
0
1.9708 -3.32
-1
4.32
6.D3. New Problem in 3rd Edition. p = 5 atm = 506.5 kPa
z C2 0.08, z C3 0.33, z C4 0.49, z C5 0.10
As sat’d liquid & for bp calculation at z i
Result is: Tbp
12 , K C2
4.6, K C3 =1.37, K C4
n-butane Matrix Analysis: K C4
D3
Fz c3
V2
V3
490, D1
V4
V5
x i . Calculation is same as in 5.D11 to obtain T.
0.35, B
D2
V6
D4
L1
0.35, K C5
F D 1000 410
D5
D6
A2
Stage3. A 3
Stage 4.
1, B 2
1, B3
A4
1
1, B 4
1
V2 K 2
L2
V3 K 3
L3
1
=1.49, C 2
=1.2480, C 3
V4 K 4
L4
L6
D 1435
L1
Stage 2.
590
0
D 1025 L 2 , L3 L 2 F 2025
D
Total Condenser (1):
B1 1 D L1 1.40, C1
K 2 V2 L 2
L1
0.10
=1.2480, C 4
L4
L5
0.35 1435
V3 K 3
L3
1025
1435 0.35
2025
1435 0.35
V4 K 4
L4
2025
V5 K 5
L5
0.49
0.2480
0.2480
0.2480
147
Stage5: A 5
1, B5
V5 K 5
1
L5
Reboiler (Stage 6). A 6
1, B 6
Mass balance matrix.
1.40 -0.49
V6 K 6
1
L6
1435 0.35
V6 K 6
=1.2480, C 5
L6
=1.8513
0
0
0
0
0
0
0
0
0
-1
1.49
-0.248
0
1
1.248
0.248
1
0
0
0
0
0
-1
1.248 -0.851
0
0
0
0
-1
5 60
300
6.D4. New Problem in 3rd Edition. L
1.248
L D D
V L D 360
Saturated liquid feed: V V
360; L
0.8513
590
L F
0.248
0
1.851
400
1
L1
V1
V1
L, L 2
0, V2
L, L3
L, L 4
V, V3
B
V, V4
F D
40
V
2
L2
V3
3
yi
V4
Bubble Pt. Set z i
F
1.0 or
Ki xi
L3
xi
yi
Ki xi
1.0
M
3.58,
E
2.17,
NP
1,
NB
0.412
4
yi
b.
xi
i
xi
Eq. (5-30),
zi i
.3 3.58
Then
and
y nP
K nP
z NP
i
.25 2.17
NP
zi
y x
i
nP
.35 1.0
0.1 .412
2.0077
0.35 1.0
0.1743
2.0077
0.1743
0.4981
0.35
148
KM
c.
M NP
K nB
Matrix for n-butanol
Stage 1. A1 , B1
1, B 2
L2
300
V4 K 4
C3
F3z nBut
Stage 4. A 4
1.2
1
0
0
d.
y 1
j
2
j=3
1.8468
40
10
1
V4 K 4
2.8468, C 4 , D 4
B
0
0.2463
1.2463
0.1847
1
1.1847
0
1
1.2, V21
V12
B2
A2
D2
C 2 V11
V13
B3
V23
V33
D3
A3
0
2
0
3
10
4
0
1
1
.2463
1.2
1.2463
1
V12
0
1
V13
10
1.8468 1.04105
.20525
.20525
0
0.1847
0.1539
1.2
V3 2 1.1847
1
A3V22
C3 V12
0
0, V31
V3
A 2 V2
V32
1
2.8468
B1
0
0
1.8468
V11
V22
0
1.1847
360 0.2052
1 B4
0.2052
0
0.1847, D 2
400
L3
100 .1
0.2463, D1
360 .2052
V3 K 3
1
K NP
1.2463
L2
L3
L4
D3
V2 K 2
V3 K 3
1, B3
nB NP
1 0.2 1.2,
360 0.2052
1
1.0809, K n-B
0.1
V2 K 2
C2
Stage 3. A 3
1.7832; K E
0.2052, z nB
1 D L1
C1
Stage 2. A 2
K NP
1.04105
0
0.1539
1.0308
1 0 1.0308 9.7014
1.7740
149
V14
j=4
B4
V24
D4
V34
e.
VP
V3
3
A 4 V23
C4 V13
2.8468
V14
0
1.7740
1 9.7014
1.0728
1.0728 9.0428
not needed.
9.0428 (bottoms flow rate)
V24
N
3NB
V23
V33
4
9.7014
2 NB
V22
V33
3
0
0.1539 25.743
3.9619
1NB
V22
V31
2
0
.20525 3.9619
0.8132
VP
VP
nP
Ptot
K nP 760
1.7740 9.0428
n 200
760
0.4981 760
378.5 mmHg
5.2983, n 378.5
1 66.8 273.16
Linear Interpolation:
5.9362
TbP
5.2983
273.16
25.743
in mmHg
Need to interpolate VP data. We know n VP
6.F1.
1
4,NB
K nP
Raoult’s Law
A4
1T
5.9362, n 400
2.9415E 3
5.99146
1 82.0+273.16
2.9415E 3 2.8163E 3
5.2983 5.99146
351.74 or TbP
2.81563E 3
2.9415E 3
0.00284
78.6 C.
Plots of vapor pressure are available in Maxwell (see Table 2-2 for reference) while tabulated
values are in Perry’s K
VPi p tot . Dew point calculation on feed gives 245.7°F.
Overall Mass Balances: D = 30, L = 5D = 150
V = L + D = 180, V V F 180 100 80 , L L 150 , B = F – D = 70
First Trial Values
Stage
T
L
V
KB
KT
Kx
245.7
70 = B
80
2.307
1.042
4
0.534
245.7
150
180
2.307
1.042
3
0.534
245.7
150
180
2.307
1.042
2
0.534
1
245.7
150
30 = D
2.307
1.042
0.534
Stage
4
3
2
1
Stage
4
3
2
1
C
-2.705
-2.8404
-2.8404
Benzene
B
3.705
3.8404
3.8404
1.2
C
-1.191
-1.2504
-1.2504
Toluene
B
2.191
2.2504
2.2504
1.2
A
-1
-1
-1
A
-1
-1
-1
-
D
0
35
0
0
D
0
40
0
0
ℓ
7.9886
29.5978
57.058
135.6569
ℓ
27.1651
59.5188
61.5875
64.1742
150
Stage
4
3
2
1
6.G1.
6.G2.
C
-.6103
-.6408
-.6408
Xylenes
B
1.6103
1.6408
1.6408
1.2
A
-1
-1
-
D
0
25
0
0
ℓ
22.7361
36.6120
21.1971
11.3193
Using Peng-Robinson. Aspen-Plus solution:
Stage
T1°C
L kmol/h
V
1
38.31
825
0
2
69.16
557.3
3
107.02
4
140.92
C4
C5
C8
x1
y1
0.360
0.6568
0.6013
0.3424
0.0386
0.00083
1375
x2
y2
0.0993
0.3601
0.4499
0.6013
0.4508
0.0386
1533.9
1107.3
x3
y3
0.03355
0.2288
0.1731
0.5251
0.7934
0.2461
450
1083.9
x4
y4
0.00436
0.04568
0.0429
0.2271
0.9528
0.7272
1. What VLE package did you use? Peng- Robinson.
2. Report the following values:
Temperature of condenser = - 2.77 oC
Temperature of reboiler = 79.97 oC
Distillate product mole fractions C2 0.3636, C3
Bottoms product mole fractions C2
1.2 E 13, C3
0.6360, C4
0.0004
0.000492, C4
0.9995
3. Was the specified feed stage the optimum feed stage? Yes No
If no, the feed stage should be: a. closer to the condenser, b. closer to the reboiler.
4. Which tray gives the largest column diameter (in meters) with sieve trays when one uses the
originally specified feed stage? Tray # 28 Diameter = 0.792 m.
5. Which components in the original problem are the key components? LK = Propane, HK =
butane
6. Change one specification in the operating conditions (keep original number of stages, feed
location, feed flow, feed composition, feed pressure, feed temperature/fraction vaporized
constant) to make ethane the light key and propane the heavy key.
What operating parameter did you change, and what is its new value? D = 20
Temperature of condenser = - 31.54 oC
Temperature of reboiler = 50.87 oC
Distillate product mole fractions C2 0.9955, C3 0.00448, C4 1.32 E 07
Bottoms product mole fractions C2
0.00112, C3
0.4364, C4
0.5625
151
6.G3.
For column 1 report the following:
a. Final value of L/D 1.8
b. Split fractions of ethanol (distillate) 0.9999 and n-propanol (bottoms) 0.9913
c. Mole fractions in bottoms 1.70 E-5, 0.00871, 0.9913
d. Mole fractions in distillate 0.4545, 0.5383, 0.00714
For column 2:
a. Optimum feed location in the column. 18
b. Mole fractions in bottoms 0.00689, 0.9800, 0.0131
c. Mole fractions in distillate 0.9917, 0.0083, 0.0
6.G4. New Problem in 3rd Edition.
1. Temperature of condenser = 389.9_ K. Temperature of reboiler = __547.4 K
Qcondenser = _-772260____cal/sec, Qreboiler = _____912459__cal/sec
Distillate product mole fractions: B= 0.23529, T= 0.76471, BiP = 0.12E-08_________
Bottoms product mole fractions:_B = 0.5 E-10, T = 0.67 E-08, BiP= 1.0000_________
2. Was the specified feed stage the optimum feed stage? Yes No x
If no, the feed stage should be: a. closer to the condenser, b. closer to the reboiler. a__
(Note: Do minimum number of simulations to answer these questions. Do not optimize.)
3. Which tray gives the largest column diameter with sieve trays when one uses the originally
specified feed stage? Aspen Tray #__16______Column Diameter =______2.28____meters
[Use the default values for number of passes (1), tray spacing (0.6096 m), minimum downcomer
area (0.10), foaming factor (1), and over-design factor (1). Set the fractional approach to flooding
at 0.65. Use the “Fair” design method for flooding.]
4. Which components in the original problem are the key components (label light and heavy
keys) _____LK = toluene, HK = biphenyl_____________________________________________
5. Change one specification in the operating conditions (keep N, feed location, feed flow, feed
composition, feed pressure, feed temperature or fraction vaporized constant at original
conditions) to make benzene the light key and toluene the heavy key. Also increase the reflux
ratio to 4.0.
What operating parameter did you change (not including the reflux ratio), and what is its new
value? D = 40________
Temperature of condenser = _368.9____ K, Temperature of reboiler = 407.7____ K
Distillate product mole fractions: _B = 0.9283, T = 0.07173, BiP = 0.8 E-19________
Bottoms product mole fractions: _B = 0.01793, T = 0.79457, BiP = 0.1875_________
6.G.5. New Problem in 3rd Edition.
1. Temperature of condenser = _121.07___ K. Temperature of reboiler = _166.23___ K
Qcondenser = ____-757506.6____cal/sec, Qreboiler = ______1058466.75____cal/sec
Distillate product mole fractions:__B = 0.9779, T = 0.22070, pxy = 0.6004 E-05__
Bottoms product mole fractions:___B = 0.0055189, T = 0.55698, pxy = 0.43750___
2. Was the specified feed stage the optimum feed stage? Yes No x
If no, the feed stage should be: a. closer to the condenser, b. closer to the reboiler. a
(Note: Do minimum number of simulations to answer these questions. Do not optimize.)
3. Which tray gives the largest column diameter with sieve trays when one uses the originally
specified feed stage? Aspen Tray #____24______Column Diameter =______2.28___meters
152
[Use the default values for number of passes (1), tray spacing (0.6096 m), minimum downcomer
area (0.10), foaming factor (1), and over-design factor (1). Set the fractional approach to flooding
at 0.7. Use the “Fair” design method for flooding.]
4. Which components in the original problem are the key components (label light and heavy
keys) ________benzene = LK, toluene = HK______________________
5. Change one specification in the operating conditions (keep N, feed location, feed flow, feed
composition, feed pressure, feed temperature or fraction vaporized constant) to make toluene the
light key and p-xylene the heavy key.
What operating parameter did you change, and what is its new value?__D=260______
Temperature of condenser = _142.2____ K, Temperature of reboiler = _183.98__ K
Distillate product mole fractions: _B = 0.30769, T = 0.68850, Pxy = 0.003805________
Bottoms product mole fractions: __B= 0.3177 E-06, T = 0.007066, Pxy = 0.99293_____
6.G.6. New Problem in 3rd Edition. Part a. L D 27 . b. L D 60 . c. D = 147, S = 453 (liquid)
distillate mole fracs:
E = 0.99007,
B = 0.00993,
P = 0.5 E-9
side stream mole fracs: E = 0.0009845, B = 0.98930,
P = 0.000854
bottoms mole fracs:
E = 0.7 E-14,
B = 0.00043,
P = 0.99957
d. distillate :
E = 0.89146,
B = 0.10854,
P = 0.556 E-8
side:
E = 0.041845,
B = 0.95794,
P = 0.000218
bottoms:
E = 0.1 E-14,
B = 0.0001095,
P = 0.99989
Since vapor mole fraction ethane > liquid mole fraction (ethane is LK), have more ethane in
vapor side stream.
e. The separation of n-pentane and n-butane is much more difficult than between ethane and nbutane. Thus side stream purity is less. Also feed has lot more pentane than ethane, which makes
side stream below feed less pure.
6.G.7. New Problem in 3rd edition.
1. Report the following values:
Temperature of condenser = _373.28____ K. Temperature of reboiler = ___411.75___ K
Qcondenser = _-829828_____cal/sec, Qreboiler = ____1012650_____cal/sec
Distillate product mole fractions: M = 0.59998, E = 0.36184, NP = 0.038177, NB = 0.3087E -05
Bottoms product mole fractions: M= 0.2042E-04, E = 0.03816, NP = 0.46182, NB = 0.50000_
2. Was the specified feed stage the optimum feed stage? Yes No X
If no, the feed stage should be: a. closer to the condenser, b. closer to the reboiler. Answer a
(Note: Do minimum number of simulations to answer these questions. Do not optimize.)
3. Which tray gives the largest column diameter with sieve trays when one uses the originally specified
feed stage? Aspen Tray #_____18_____Column Diameter =___1.77____meters
[Use the default values for number of passes (1), tray spacing (0.6096 m), minimum downcomer area
(0.10), foaming factor (1), and over-design factor (1). Set the fractional approach to flooding at 0.7. Use
the “Fair” design method for flooding.]
4. Which components in the original problem are the key components (label light and heavy keys)
______________LK = ethanol, HK = n-propanol_______________________
153
5. Change one specification in the operating conditions (keep N, feed location, feed flow, feed
composition, feed pressure, feed temperature or fraction vaporized constant) to make methanol the light
key and ethanol the heavy key.
What operating parameter did you change, and what is its new value?_____D = 60____
Temperature of condenser = __368.66__ K, Temperature of reboiler = _404.23___ K
Distillate product mole fractions: M = 0.97858, E = 0.021417, NP = 0.155 E-07, NB = 0.1 E-10_
Bottoms product mole fractions: M = 0.0091787, E = 0.27654, NP = 0.35714, NB = 0.35714__
154
Chapter 7
New Problems and new solutions are listed as new immediately after the solution number. These new
problems are: 7.A1, 7.A4, 7.D2, 7.D10, 7.D11, 7.D14, 7.D21, 7.G1.
7.A1. New problem in 3rd edition. f. none of the above.
7.A.4. New problem in 3rd edition. a. estimate fractional recoveries nonkeys at total reflux.
7.C4.
Use yi, j
1
K i x i, j 1 . Then substituting into Eq. (7-20), we have
Vmin K i x i, j
which is
L min x i, j
Vmin K i x i, j
L min x ij
1
Vmin K i K HK
1
1
L min x ij
1
Dx i,dist where K i
1
Kx i,dist , or L min x i, j
L min
c
Total flow rate L min is L min
i 1
L min x ij
K HK . Rearranging,
i
1
i
c
Dx i,dist
V K
i 1 min HK
L min
1
i
(A)
1
i
i
Vmin K HK
L min
Vmin K1
i
Dx i,dist
Vmin K HK
L min
1
Bx i ,bot
L min
By a similar analysis obtain,
Let
Dx i,dist
(B)
1
i
Vmin K
L
(C)
L
L min
L min
Add Eqs. (A) and (B), and use external mass balance,
qF
L feed
L min
c
From Eqs. (A) and (C) we have L min
7.C5.
VF
For saturated vapor feed have
1/
i 1
Dx i,dist
1/
Fz i
c
i
(7-33 analogue)
i
L
i
i
(7-29 analogue)
L
F . For binary system Eq. (7-33) is,
z
1 1
1
i 1
L min
2
1
z2
2
Clearing fractions we obtain
1
2
z
2
z
1 1
2 2
1
After some algebra this
z
2
Solutions are,
1 1
0 or
For sat’d liq’d VF
1
z
2 2
2
1
z
1 1
2
2
0
z2
0 . Clear fractions and equation is linear.
155
x 1 x
n
7.D1.
dist
x 1 x
a. Eq. (7-16), N min
n
bot
.992
.008
.014
.986
10.36
n AB
n 2.4
This includes the partial reboiler. Eq. (7-40a) gives,
x 1 x
n
z 1 z
N f ,min
b. Saturated liquid:
Vf
dist
n
B
zB
T
B
B
zT
0
T
,
1.0 2.4
zB
zB
T
5.97
n 2.4
AB
After clearing fractions and solving for
.008
.4 .6
feed
0 . Eq. (7-33) becomes
T
.992
n
zT
2.4 .4
1.0 .6
1.53846
Which does lie between the α’s of the keys. To use Eq. (7-29) we need D. From mass
balances (Eq. (3-3)).
z
D
Eq (7-29) is:
x bot
x dist
Vmin
B
x bot
.4 .014
F
.992 .014
Dx Bdist
T
Dx Tdist
B
Vmin
L min
c.
L D
Using Eq. 7-42b,
1.1 L D
N
3.9468 kg moles/hr
.
T
2.4 3.9468 .992
2.4 1.53846
Vmin D 6.9013 .
min
10
1.9234 , x
1.0 3.9468 .008
1 1.53846
L D min 1.75
L D
L D
min
L D 1
10.848
0.0598
N min
0.5563
N 1
.5563 N min
Solving for N, N
24.6 (includes reboiler)
1 .5563
N F,min
5.97
From Eq. (7-40b), N F N
24.6
14.2
N min
10.36
Try stage 14 from top for feed stage.
7.D.2.
New problem in 3rd edition.
p
5 atm, z C2
Saturated liquid and for bp. Calc., z i
0.08, z C3
x i . Want
Pick C 3 as reference (this is arbitrary). 5 atm
1st Guess: Want K C3
1 (light key), K C4
yi
101.3
0.33, z C4
0.49, z C5
0.10
1.0 .
kPa
506.5 kPa
atm
1 (heavy key). Use DePriester Chart.
156
20 C , K C2
Try T
yi
1.7 , K C4
5.4 , K C3
5.4 0.8
1.7 0.33
0.47 , K C5
0.47 0.49
0.14 0.10
0.432 0.561 0.230 0.014 1.237
K C3 20
1.7
Need lower T.
K C3 Tnew
1.237
Kixi
Tnew
12 , K C2
yi
n
N MIN
b)
C2 C4
0.35, K C5
C4
HK be reference.
0.10
1.37 0.35
C3C4
3.914
0.997 0.998
0.003 0.002
12.01874
n 3.914
i
0
C4 C4
1.0,
3.914 0.33
13.14
i
3.914
Solve for φ. Find φ = 1.74 (Note i
VMIN
0.1 0.35
C5 C4
0.286
VMIN . In Eq (7-33) divide through by F.
13.14 0.08
zi
8.808 (includes PR).
1.36456
4.6 0.35 13.143,
Sat’d liquid feed VMIN
Eq (7-29)
1.37
0.368 0.4521 0.175 0.0 1.0016
For remainder, let
a)
4.6, K C4
0.14
Dx i,dist
1.0 0.49
1.0
3.914
LK HK
0.10 0.286
0.286
HK HK
)
. Assume all C 2 in distillate & all C 5 in bottoms
i
Dx i,C2
Dx i
Dx i
80, Dx i,C5
C3
C4
0
0.997 1000 0.33
1 0.998 1000 0.49
D
VMIN
c)
13.14 80
329.01 3.914
13.14 1.74
L MIN VMIN
L MIN
Eq (7-42b)
N
N
Dx i,d
0.98
409.99
0.98 1.0
0 683.23 kmole h
3.914 1.74
1.0 1.74
D 273.24; L D MIN 0.6664
1.15 L D
Ordinate Gilliland
329.01
MIN
0.7664
0.7664 0.6664
1.7664
N MIN
0.05662
0.545827 0.591422 0.05662
N 1
0.5608 8.808
1 0.5608
0.002743
0.05662
0.56079
21.33 (include PR)
157
Dx LK Dx HK
n
N F,MIN
Eq. (7-40b)
n
N F,min
NF
N min
N
1
N min
AB
x 1 x
n
7.D4.
x 1 x
N min
a.)
dist
bot
log
xA
xB
n
n3.914
.552
NF
xA
xB
d
xA
xB
d
xA
xB
bot
bot
.01773 0.98227
y
L D
L D
min
13
.36
.64
1.287
y*
10.02
0.9915 y*
0.9915 0.6
x
1
1 x
(L/V) min = 0.534,
c.) Abscissa =
.545
.455
.9915 .0085
(L/V)min =
* z = .6
bot
AB
1 N min
n AB
n 2.4
b.) Feed is saturated liquid, feed line is vertical.
y*
xA
xB
d
log
xA
xB
4.552
21.33 11 (approximate)
8.808
7.D3. At total reflux use Fenske Eq. (7-11). N min
AB
329.01 0.98
0.33 0.49
n
LK HK
log
Rearrange, log
dist
z LK z HK
0.7826
x z 0.6
L
D
L V
min
1
L V
1.144
min
2.2286 1.144
0.336
L D 1
3.2286
From Eq. (7-42b)
N N min
0.002743
0.545827 0.591422 0.336
0.3553 ordinate
N 1
0.336
N min ordinate 10.022 0.3553
N
16.1
1 ordinate
1 0.3553
10.022 0.3474
From fitted curve ordinate = 0.3474, N
16.2
1 .3474
Error = 25-16 25 36% low. Aspen Plus equilibrium data is not α = 2.4. Note that α = 2.24 may be a better fit.
158
log
7.D5.
Fenske Eq. is: N min
xD
1 xD
xB
1 xB
log
30,
7.D6.
N min
1.30 and x D
xD
1 xD
log
Fenske Eq.: N min
xD 1 xD
0.984, this is x B
xB
1 xB
log
2.4 .4
x
1
1 x
xD
L
V
xD
min
Then,
x
.01
.99
.993 .616
z
.993 .4
1.15 1.746
0.636 ,
0.4 .
L
D
L V
1 L V
min
1.746 .
min
2.01
act
L D
Gilliland Correlation: Abscissa
L D
2.01 1.746
min
L D 1
3.01
N N min N 10.82
Ordinate 0.557
N 1
N 1
Clear fractions, and find N = 25.3 (including partial reboiler).
7.D7.
p
5 atm. From the solution to problem 6.D9: Tbp
K C2
Let C 4
4.6, K C3
1.37, K C4
HK
reference.
z
i i
Eq. 7-33, 0
i
Want
LK HK
0.35, K C5
0.10
0.02 0.008
8.7121
1.36456
4.6 0.35 13.143,
C2-C4
0.10 0.35
C4 C4
6.38
1.0
0.286
Vmin
13.14 0.08
13.14
3.914
.0878
12 C
n 3.914
C5 C4
Sat’d/liquid feed, Vmin
3.01
3.914
0.35
0.98 0.992
C3 C 4
a) Eq. (7-15), Including PR N min
C4
.264
1.37
HK be reference.
n
b)
10.82
2.4
.616
1.4 .4
y*
L
D
1
0.229
.993
.007
log
log
Determine y in equilibrium with feed z
y*
xB
1 xB
xD 1 xD
Solving for x B , we obtain: x B
Since N min
xD
1 xD
N min
or
3.914 0.33
3.914
1.0
HK HK
1.0 .49
1.0
. Converge to
0.10 0.286
0.286
= 1.74.
159
Dx i
C2
Dx i
C4
Fzi
0.98 1000 0.33
C3
.008 1000 0.49
13.14 80
Eq. (7-29), Vmin
80, Dx i
323.4 3.914
3.92, Dx i
C5
323.4
0
3.92 1.0
0 671.05
13.14 1.74
3.914 1.74
1.0 1.74
D
Dx i,d
407.32, Lmin Vmin D 263.73, L D min
c)
L D 1.2 L D
N
Eq. (7-42b),
N min
0.002743
0.545827 0.591422 0.073
0.073
0.073
0.5402
15.05, incl. PR. Nfeed ~ 9
1 0.5402
a. Can do this graphically, or can calculate slope of a line from y x x D .992 to
intersection of feed line and equilibrium, or use Underwood. Easiest to calculate slope. Feed
line y z F .4 .
Equilibrium: x
y
y
V
c.
min
N min
.992 .3755
1.2
Ordinate
22.83
N
L
.958 ,
xB
1 xB
D
L V
min
L D
27.4 , Abscissa
L D
22.83
1 L V
.992
.005
.008
.995
n 1.11
n
This is 95.9 stages plus partial reboiler.
L D
.3755
.4 1.11 .6
.992 .4
xD
1 xD
n
b.
.4
1 y
L
min
L D 1
96.9
27.4 22.83
27.4 1
.161
N min
or N 181.9 which includes partial reboiler.
N 1
This separation would probably not be done by distillation.
LF
Fz
Feed 80% liquid, L F .8F,
, Slope
VF .2F. Feed line: y
x
VF
VF
7.D9.
a.
0.777 0.647 1.777
N 1
0.5402 6.38
N
7.D8.
0.777 . Ordinate Gilliland
min
0.647
See Graph.
.47
L V
L
D
b.
c.
N min
6
L
D
L
Min top op line is tangent.
3
4
min
1
min
L V
min
V
slope
min
0.5175
1 .5175
.8 0.386
0.8 0
8
2
4
0.5175
1.0725
eq. contacts. See graph.
1.05 1.0725
1.1262 . Abscissa, Gilliland Correlation is
actual
160
L D
L D
min
1.1262 1.0725
0.053666
2.1262
2.1262
L D 1
Ordinate ~ 0.63 from graph.
From eq. (7-42b), Ordinate
0.02524
0.545827 0.591422 0.02524
(agrees with graph).
N min ordinate 6.75 0.6396
Then
N
20.5
1 ordinate
1 0.6396
Need 20 eqs. contacts + P.R.
N F,min
6
20.5
18
N F,min from graph = 6. N F N
N min
6.75
0.002743
0.02524
0.6396
(7-40b)
7.D10. a) New problem in 3rd edition. Eq. (7-15)
n
N MIN
FR E ,dist
FR B,bot
1 FR E ,dist 1 FR B,bot
n
EB
161
0.989 0.998
n
EB
b)
N MIN
0.011 0.002
N MIN
13.14
n 13.14
4.159 is known..
PB
2.5756
N MIN
Dx D
4.159
FR B,bot
N MIN
1 FR B,bot
c)
4.159
3.91.
PB
Eq. (7-17) FR P ,dist
10.7114
PB
3.91
0.998
3.91
0.002
4.159
0.3677
FR i,dist Fzi
i
Ethane
Dx DE
0.989 100 0.3
29.67
Propane
Dx DP
0.3677 100 0.33
12.134
n-butane
Dx DB
0.002 100 0.37
3
D
i 1
0.074
Dx i,d
41.878
kmol
h
Also accept D = 0 since total reflux.
7.D.11. New problem in 3rd edition.
D
200
zn
0.35
z iP
0.4
z NP
2
V1
0.25
1
B
Use Underwood Eqns. – Case A Assume LNK (propane) is all in distillate.
b)
Vfeed
F 1 q
Eq. (7-33). F 1
F since q
i
F zi
Dx p,dist
Fz p
20
0
where φ is between α’s of two keys (B and H) i
1.0 > φ > 0.2. Equation is, 2.04 0.2 1.0 .35
1.0
2.04
1.0
Solving for φ obtain φ = 0.62185.
0.20 0.45
0.20
162
Then
Vmin
Dx B,dist
Dx i,dist
. Find D from fractional recoveries.
0.99 100 .35
34.65
Dx p,dist
20
Dx H ,dist
1 0.98 100 .45
0.9
D
VMIN
L min
7.D12.
2.04 20
55.55
1.0 34.65
0.2 0.9
2.04 0.62188 1.0 0.62188 0.2 0.62188
VMIN D 64.4314 and L D min 1.1599
A = benzene (LK),
AB
2.25, FR A,dist
B = toluene (HK),
BB
1.0, FR B,bot
C = cumene (HNK),
CB
0.210
0.98
0.99
n
a. Use Fenske eqn. at total reflux. N min
FR A ,dist
1 FR B,bot
1 FR A ,dist
FR B,bot
n
0.98
0.02
n
N min
0.01
0.99
AC
FR A ,dist
N min
where
AB
2.25
CB
0.21
AC
AC
1 FR A ,dist
AB
10.47
n 2.25
N min
FR C,bot
119.98
10.71
10.47
10.71
FR C,bot
0.98
10.47
10.71
0.02
(We can also substitute into Eq. (7-17)).
N min
AC
FR C,dist
FR B,bot
0,
100
Find
Vfeed
0.21
N min
CB
1 FR B,bot
b. Underwood equations – Case B analysis
Feed is sat. vapor. q
1 . All cumene goes to bottoms.
F 1 q
.99
.01
F 100 ,
10.47
0.21
Vfeed
2.25 40
1.0 30
0.21 30
2.25
1.0
0.21
8.1 10
10.47
C
i 1
i
12
0
Fz1
1
1.6516.
163
C
Vmin
Dx A,dist
100 0.4 0.98
i 1
From mass balance, L min
100 0.3 0.01
1.0 39.2
2.25 1.6516
1 1.6516
1.25 2.71
min
ordinate = 0.46. With N min
L D
xA
xB
Underwood:
Vf
V V
Dx B,d
Dx T,d
Vmin
L min
dist
D
39.6
min
2.71
feed
AB
n 2.25
N feed
N
gives N feed
1 .9899
0.0101
5.30.
10.25. Use stage 10 or 11.
.99
.02
99 , FR C 1 FR C
0.0204
.01
.98
log 99 0.0204
log 4851
5.438
log TC
log 1 0.21
2.5 .25
0, 0
1.526 or 0.3374. Use
zA
zB
0.9899,
xB
39.6
0.9899
0.4
n
0.0101
0.3
min
N min
107.2
0.155 . From Figure 7-3 the
min
39.2
min
1 FR T
L D
n
min
N min
Use Fenske eq. FR T
L
min
x A ,dist
7.D13.
39.6
3.39
L D 1
n
N feed
0, D
10.47, we find N = 20.24.
To find N feed , we need N feed
N feed
i,dist
0 146.78
D 146.78 39.6 107.2 ,
abscissa for Gilliland correlation
N feed
Fz1 FR
0.4, Dx C,dist
2.25 39.2
Vmin
L D 1.25 L D
where Dx i,dist
1
39.2, Dx B,dist
Vmin
c.
Dx i,dist
i
2.5
1.0 .30
1.0
0.21 45
21
0.3374 as it is between keys. Vmin
Fz B
3
i 1
1
Dx i,d
1
25 (assume all benzene in dist.)
.99 Fz T
2.5 25
29.7, Dx c,d
1.0 29.7
0.02 Fz c
0.9, D
.21 9
2.5 0.3374 1.0 0.3374 0.21 0.3374
V D 16.64 and L D min 0.2993
55.6
72.24
164
N
Gilliland: Ordinate
N min
9 5.438
0.3562
N 1
10
Abscissa ~ .29 (original Gilliland) or .36 (Liddle)
L
L
L
If use 0.29 have,
0.29
0.29
D D min
D
If use Abscissa = 0.36,
L
.29 0.2993
D
L
1 .29
.36 .2993
D
.83
1.03 which are quite different. Safer to use
1 .36
higher value.
If
2.25, N min is same. Underwood Eq. gives
BT
Vmin
72.68 , L min
29.40 44.78 1.492
Which is 2.7% different than for
BT
1.4666 or 0.3367. Use 0.3367.
V D 17.084 and L D min
0.3073
2.5.
7.D14. New problem in 3rd edition. Use Gilliland correlation to find the value of the minimum reflux
ratio, (L/D)min = 1.4
FR B,dist FR C,bot
n
7-D15.
1 FR B,dist
Fenske: Eq. (7-15), N min
Dx d ,tol
N F,min
1
.21
0.8238 167
Dx d ,benz
0.9992 397
Dx d ,cum
0.0001 436
x LK
x HK
dist
n
LK-HK
.0008 .0001
2.25
n
.21
6.89
.21
6.89
1
.21
.9999
.0001
.9992 .9999
1
TC
N min
TC
1 FR C ,bot
FR tol,dist
BC
where
FR C ,bot
n
1 FR C,bot
n
N min
TC
Eq. (7-17), FR T ,dist
n
z LK
z HK
0.8238, and FR tol,bot
6.89
x dist
137.57
396.68
0.2568
0.7418
.0436
D
n
0.1762
534.294
0.0008
.7418
.397
.000815
.0436
n 2.25 .21
1.94 .
Underwood: Use a Case C analysis since toluene is a sandwich key.
3
2.25 397 1.0 167
.21 436
1Fz1
Eq. (7-33): 0
VF
is, 0
i 1
2.25
1.00
.21
1
1.216 and 0.3373 which lie between α’s.
165
Eq. (7-29):
Vmin
3
Dx i,dist
i 1
Write for
For
i
2.25 396.88
becomes Vmin
1.0 Dx tol
2.25
i
.21 0.436
1.0
.21
1.216 and for 0.3373. Obtain 2 eqns and 2 unknowns: Vmin and Dx tol,dist .
1.216 , Vmin
.3373, Vmin
863.525 4.629 Dx tol . For
466.15 1.509 Dx tol .
Solving simultaneously, Vmin
563.84, Dx tol
64.740
D
Dx i,d
396.88 64.74 .436
L min
Vmin
D 101.79 and L D
L D L D min
462.056
min
0.2203
1.2 .2203
0.445
L D 1
2.2
N N min
Ord. .245
(Original Gilliland)
N 1
Obtain N = 9.45 (includes reboiler)
N F,min
2.91
N
9.45
2.66 (Use stage 3)
Estimate N F
N min
6.89
Gilliland Abscissa
n
7.D16. a. Fenske: N min
b. Underwood:
x
x
1 x
dist
EP
Vfeed
2.1 .6
1.0 4
2.1
1.0
To find D: D
1 x
bot
n
Fz E
z
xD
1.0 F z p
1.0
EP
1
.99 .992
.01 .008
n 2.1
n
,
0 or
xB
F
xB
, zE
.6, z P
1.44 . Use
.6 .008
.99 .008
1000
1.0 .008
D
2.1 1.44
1.00 1.44
c. Use Gilliland: Ordinate
N
N min
Sounds harder than it is: 0
f
Vmin
L
D 1285.3,
D
2.13
min
.30 12.69
VF
F
F
3.132
0.558
N 1
31
L D L D min
Abscissa ~ 0.8
(Original Gilliland), L D
L D 1
7.D17.
V V
602.85 . Then
2.1 .99
1888.12, L min
Vfeed
1.44 which is between 1.0 and 2.1
Vmin
Vmin
.4,
12.69
i
zi
,
tol-xy
3.03,
-
xy xy
2.4
1
i
166
Expand & Solve for
, 0
tol
z tol
xy
tol
xy
Result is linear,
xy
tol
tol z tol
tol
xy z xy
i
Vmin
Then
z xy
Dx i,dist
z
D
,
3.03
3.03 .1
0.3
.9
3.03
3.03 .3
0.5
.7
3.03
3.03 .5
.7
.5
3.03
3.03 .7 .3
.9
3.03 .996
3.03
3.03
3.03 .9
.1
3.03 2.51870
1 2.51870
3.03 .996
.004
3.03 1.88316
1 1.88316
D
.004
3.03 1.503722
1 1.50372
3.03 .996
.004
3.03 1.25155
1 1.25155
90.2834
1.071806
54.93685
3.03 .996
70.0405
1.25155
Vmin
L min
.004
49.7976
1.503722
, L min
1
3.03 .996
29.5547
1.88316
0.988
Vmin
9.3117
2.51870
xB
1
xy
z .008
F
1.0 .004
D
z tol
0.1
D
xB
xD
i
Vmin
sin ce
1 z tol
tol z tol
77.6383
D
D
3.03 .996
.004
3.03 1.071808
1 1.071808
98.0683
117.739
D
129.08
100
D
L
45.625
D min
4.8997
48.0836
1.6269
48.2707
0.96934
47.6985
0.68101
38.7990
0.429
Check for z = 0.5.
Slope
xD
L V
xD
L
y*
V
y
y*
.5 = z
min
y*
x D .5
min
where
xF
1
1 xF
0.75186
0.996 0.75186
x
As z
0.996 0.5
L
L
L V
.4922
D
V L
1 L V
1 4922
min
, although L D min , Vmin , thus Qc
Q R,min
min
Vmin
0.4922
0.96934 Perfect
as expected.
also.
167
FR A ,dist FR B,bot
n
1 FR A ,dist
Fenske: Eq. (7-15): N min
7.D18.a.
n
Where A = propane, B = butane,
1 FR B,bot
AB
1/ .49
AB
2.04 . (Note value α.)
.9854 .8791
n
.0146 .1209
N min
8.7
n 2.04
For N F,min assume no LNK is bot and no HNK in distillate
D = .229 + (.9854) (.368) + (.1209) (.322) = .631
.9854 .368
.1209 .322
x prop
0.575, x C4
.631
.631
x C3
x C4
n
N F,min
z C3
zC4
dist
n
.575
.0617
n
F
.368
.322
2.94
0.713
C3-C4
Underwood Eqns. (Case A.) 0
0.0617
1
Vfeed
Fz1
for 1.0
.49
1
0
9.92 .229
f
9.92
L min
1.0
9.92 .229
0.6213 , Vmin
Find
1.0 .368
N
.081 0.10
.49
1.0 .363
.10
.49 .0389
9.92 .6213 1.0 .6213
.49 .6213
D 1.057 .631 .426, L D min 0.676
Vmin
Gilliland Correlation (Fig.7-3): abscissa
Ordinate
.49 322
L / D (L / D) min
L/D 1
1.057
0.33
N min
.32 (Original Gilliland, ~.36 Liddle). Find N = 13.24 (14.13 Liddle)
N 1
b. With N = 20, ordinate to Gilliland correlation is,
N N min 20 8.7
0.538
N 1
21
Abscissa = 0.1. Since L D min 0.676, solve for L/D = 0.862.
c.
FR C 6
N min
C6 C3
FR C 3
dist
1
where
FR C 6
FR C 3
C6 C3
0.10
dist
0.0156
1 0.0156
N min
C6C3
bot
bot
0.10, FR C3bot
1 FR C3dist
0.0156, and N min
8.7.
8.7
0.10
8.7
0.00000013 , FR C6
bot
0.99999987
168
For all practical purposes all C6 in bottoms at total reflux.
d.
FR C3dist
0.999, L / D 1.5, FR B,bot
n
N min
1)
2)
0.8791
FR C3dist FR C 4 bot
1 FR C3dist
n
.999 .8791
n
1 FR C 4bot
.001 .1209
12.47
0.713
C3C 4
For D assume all LNK in dist, No HNK in dist
D = 0.299 + (0.999) (0.368) + (0.1209) (0.322) = 0.6356
f
Now
0
9.92 .229
1.0 .368
9.92
.49 .332
1
.081 .1
.49
.1
Which is same [φ depends only on feed & α’s]. Thus, same φ = 0.6213
Vmin
L min
7.D19.
9.92 0.229
1.0 0.368
0.49 4689 ??
9.92 .6213
1 .6213
.49 .6213
1.0709 0.6356
Use Figure 7-3. Ordinate
L D
N
0.4345
N min
25 11
N 1
L D
L D min
1.0709
0.6848. Very little change.
0.5385
26
0.08 with L D 2.2286 . L D
L D 1
Abscissa approximated between original & fitted curves.
Then Abscissa
7.D20. a) Distillate
Dx Bdist
x dist
Find
Fz B
min
5, Dx Tdist
1.0 becomes
Fz T
5
15
D
D
min
1.97
15 ,
0.57895 0.07018 1.0
D = 57.001 kmoles/hr, B = 100 – D = 42.999
n
b) Can use Fenske eq. (7-11) or alternatives. N min
AB
xylene cumene
Xylene balance, Fz
x x,bot
35
xA xB
dist
xA xB
bot
n
AB
A
xylene
B
cumene
K xy
K xy K tol
xy
0.330
K cum
K cum K tol
cum
0.210
57.00 0.57895
0.0465, x cum,bot
1 .0465
1.57143
42.999 x x,bot
0.9535
169
n
N min
0.57895 0.07018
0.04650 0.9534
11.35
n 1.57143
This is # equil contacts at total reflux.
Dx x ,dist
57.001 0.57895
c) Alternative: FR xy,dist
Fz x
35
1 FR C,bot
Dx C,dist
57.001 0.07018
Fz C
45
n
Use Eq. 7-15.
N min
0.088896 , FR cum,bot
0.91110
FR B,bot
1 FR A dist
n
n
N min
FR A dist
0.94288
1 FR B,bot
AB
,
A
xylene
B
cumene
0.94288 0.91110
0.057122 0.088896
n 1.57143
11.35
7.D21. New problem in 3rd edition. Assume all ethanol in distillate and all n-butanol in bottoms.
Dx E ,dist
Dx i
Fz E
100 .3
30
Fz ip Frac Rec iP dist
P,dist
Dx n
P,dist
Fz nP
Dx n
B,dist
0
100 .25 .986
1 Frac Rec nP dist
24.65
100 .35 .008
0.28
0
D
Dx i,dist
54.93
xE,dist = xE,dist/D = 0.5461, xi-P,dist = xi-P,dist/D = 0.4488, xn-P,dist = xn-P,dist/D = 0.0051
Bx E ,bot
Bx i
P,bot
0
0
Fz iP 1-Frac Rec iP dist
100 .25 .014
0.35
100 .35 0.992
34.72
Bx n
P,bot
Fz nP Frac Rec nP bot
Bx n
B,bot
Fz n
B
100 0.10
10.0
B = 45.07
x i,bot
Bx i,bot
B
xi-P,bot = Bxi-P,bot /B = 0.0108, xn-P,bot = Bxn-P,bot /B = 0.7704, xn-B,bot = Bxn-B,bot /B = 0.2188
170
FR ip,dist FR nP ,bot
n
b.
Fenske eq. (7-15)
1 FR iP ,dist
N Min
n
N min
n
iP nP
.986 .992
.014 0.008
n 1.86
This includes PR
x iP
x nP
n
N F,MIN Eq. 7 40a , N F,MIN
c.
1 FR nP ,bot
n 8733
9.0748
0.62058
0.62058
z iP
z nP
dist
n
14.62
0.4488 0.25
0.0051 0.35
0.62058
n
iP-NP
7.76
Underwood Equation: Assume NKs do NOT distribute: Case A.
i Fz i
Eq. (7-33)
Vfeed
i
Vfeed
For saturated vapor
z
i i
F divide (7-33) by F. 1
, which becomes
i
E nP
1
zE
iP nP
ENP
1
z iP
nP NP
iP NP
3.58 0.3
z NP
NB NP
NP NP
1.86 0.25
z NB
NB NP
1 0.35
0.412 0.10
3.58
1.86
1
0.412
Solve for φ between α values of keys. LK = i-propanol, HK=n-propanol.
1.0
1.86 . From Goal Seek on spreadsheet
1.48648
i
Then from Eq. (7-29) Vmin
Dx i,dist
where Dx i,dist
Thus, want
values from part a.
i
VMIN
L MIN
d.
L D 1.1
VMIN
3.58 30
1.86 24.65
1.0 0.28
0 173.47
3.58 1.48648 1.86 1.48648 1.0 1.48648
D 173.47 54.93 118.54 , L D MIN 118.54 54.93 2.16
L
D
Min
Gilliland abscissa, x
or
L D
L D
1
MIN
L D 1
x
L D
L D MIN
L D
L D MIN
L D MIN
L D
1
1
L D
1
1
L D MIN
1
1.1
1
1
1.1 L D MIN
1.1 1
1
1.1
2.16
1
0.0683
171
N
From Eq. 7-42b,
Assuming
7.F2
N MIN
0.5456
N 1
N 1 0.5456 0.5456 N MIN
NF
N F,MIN
N
N MIN
NF
7.76
33.4
33.4
N includes PR
17.7 or Stage 18 below total condenser.
14.62
Equilibrium data is available in a variety of sources such as Perry’s Handbook. Data used here is from Perry’s (3rd ed.), p. 574.
a) Need to obtain avg. α from equilibrium data.
yN2 1 x N2
0.1397 0.9615
x 0.0385, y 0.1397,
4.055
1 y N2 x N2
0.8603 0.0385
x N2
0.4783, y
x N2
.9190, y N2
n
Fenske N min
xD
.9770,
4.01 3.744
avg top&bot
b)
0.7893 (needed for part b)
x 1 x
x 1 x
n
1/ 2
dist
=
.9770 .0810
.0230 .9191
3.744
3.875
n
bot
.998 .002
.001 .999
n 3.875
AB
9.685
z
where x* is in equilibrium with feed y z 0.79
xD x *
From equilibrium data x* ~ 0.48.
L V min
L
0.40
.998 .79
0.66667
L V min
0.40 ,
D min 1 L V min 1 0.40
.998 .48
L V
min
L / D 1.1
c)
L/D
Gilliland Correlation: abscissa
Original correlation, ordinate
N
0.7333
min
L D
L D
1 L D
min
0.06666
1.7333
0.0385
N min
0.6 N = 25.7 including PR. Need 25 equil. Stages
N 1
7.G.1. New problem in 3rd edition. a. At total reflux N MIN 9
b. L D
MIN
0.92
172
Chapter 8
New Problems and new solutions are listed as new immediately after the solution number. These new
problems are: 8.A1, 8.A2, 8A7, 8A12, 8.D1, 8D6, 8D12, 8.D13, 8D15, 8D17, 8D20, 8.D22, 8D23 to
8.D25, 8.E1, 8G1-8G5, 8.H3.
8.A1. New Problem in 3rd edition. a. 2-pressure distillation
8.A2. New Problem in 3rd edition. b. extractive distillation
8.A7. New Problem in 3rd edition. If there are volatile and non-volatile organics, a single equilibrium
contact gives an organic layer that contains no non-volatiles. Extra stages do not increase the
separation. If there is entrainment, a second stage may be useful.
8A.12. New Problem in 3rd edition. Steam distillation is normally operated with 2 liquid phases in the
still pot and in the settler after the condenser. There is usually no reflux. Azeotropic
distillation is normally operated with one liquid phase in the column and in the reboiler, but
with 2 liquid phases in the condenser and settler. One of the liquid phases is refluxed to the
azeotropic column.
8.C2.
y org x org
org w in water
p org x org
in w
yw x w
At solubility pt. x w in w
pw x w
in w
.975 and x org in w
H org x org x org
H org
VP
VP
w
xw xw
.025, x org in org
Vapor pressures (Perry & Green, 1984). N-butanol:
T = 70.1°C
84.3°C
l00.8°C
VP = 100 mm Hg
200
400
VP
w
org
VP
w
x org
x org
in org
in w
.573
117.5°C
760 mm Hg
Water: T = 100.8°C, VP = 782 mm Hg,
T = 84.3, VP ~ 421.8 mm Hg
VPorg
VPorg 400
200
at 84.3°C:
0.474 , at 100.8:
0.5115
VPw
421.8
VPw
782
For
org w
use average between 92 and 100°C. Can linearly interpolate at T = 96°C,
VPorg / VPw
0.501 ,
w org in w
From y w
w o
1
org w in w
1
xw
w o
org w in w
0.501 .573 .025 11.483
1 11.483
0.0871x w
1 xw
1 0.9129x w
generate equilibrium curve,
xw
1.0
.995
yw
1.0
.9495 0.8961
.990
At constant x w , the calculated y w
0.0871
.985
.980
0.8512 0.8102
.975
0.7726
y w ,exp eri min tal . Difference at x B
approximately .7726 .752 .752 100
0.975 is
2.74% .
These equations work better for mixtures which are more completely immiscible.
173
8.D1.
New Problem in 3rd edition.
Top Op. Eq.,
y
L V x
1 L V xD, xD
L
L D
4
V
1 L D
5
xB
0.11 (from diagram). Need 2 equil. Stages.
.8 , y intercept x
0
1
L
V
xD
.975
.2 .975
.195
Graph for problem 8.D1.
8.D2. The columns are sketched in the Solution to Problem 8-C2. B1 is butanol phase and B 2 is water
product. Two equilibrium diagrams are shown.
a.
F B1 B2 , Fz B1x B 1 B2 x B2
174
B1
b.
z
x B2
x B1
.28 .995
x B2
L
Col. 1. Bottom Op: y
V
Feed: 70% Liquid, q = .7,
Top y
L
V
x
V
L
x
V
1
q
7
.3
0.995 .436
0.995 0
min
0
1256.55
1 x B1 , Intersects y
.7
q 1
F B1
3
x
x B1
0.04 .
. Intersects y = x = z = .28.
x B2
V
L
y intercept x
Note that reflux is x 0
L
1
From Figure 8-D2a:
3743.45 , B2
.04 .995
1
L
x B2
V
0.562 ,
L
V
1.23 .562
0.69
0.307
0.573 . Optimum feed stage = 3. Need about 3 stages + partial reboiler.
L
Stripper (Column 2): y
L
V
V
V
2
B
V
L
x2
V
2
V B
1
2
V B
2
1 x B2
1.132
.132
8.57
Construction is shown in Figure 8-D2b. Need 1 2/3 eq. contacts or P.R. + 2/3 equil. stage.
175
8.D3.
a)
y = 0.4, x = 0.09 from graph.
B) V/F = 0.3
L
20 = Fz = Vy + Lx
20 = 0.4 V + 0.09 (100 – V)
V 11 .31 35.48 kg moles / h
L = 64.52 kg moles/h
F zw x w
100 0.99 0.999
yw
xw
1 V/F
.7
7
V
V
V/F
.3 3
L
F
7
.99
y
x
z
x
V
V
3
0.3
See Enlarged figure [Be careful with scales]
y w 0.969, x w 0.999
100 = F = V + L
V
F V
0.969 0.999
Use Table 8-2 to find
= 30
V, Tdrum @ y w
kg moles/hr
hr
0.40, x w
0.09 , L = 70 and Tdrum ~ 108 C
176
8.D4.
Compositions x
100
0.975 [Shown on Figure 8-D3a]
L and 88 = Fz = L x
L
F z x
L x
100 .88 0.573
= 76.37 kmoles/hr, L
23.63 kmoles/hr
x x
.975 0.573
a) Water conc. W is 0.975.
200 = F = W + B
W = 200 – B
Water balance: (200) (.8) = Fz = W(0.975) + B (0.04)
Solve: B = 37.433 kmol/hr, W = 162.567 kmol/hr
V B V B 1 5
L
L
b) L V
, Bot. Op. Eq. y
x
1 xB .
V
V B
4
V
V
L
8.D5.
F
0.573 , x
Goes through y
x
xB
177
Plot operating line: If y = 1, x
1
0.25 .04
1.25
PR + 2 stages mores than sufficient. (see graph)
0.75 0.04
c) L V
Slope
1.332
min
0.573 0.04
V
1
1
L V
3.012
min
L V L V 1 0.332
0.808
178
8.D6.
New Problem in 3rd Edition.
F
D, x dist
Reflux
L
V
B, x bot
8.D.6 Part a)
F D
F .65
D
b)
B
.975D .02B
z
F
V
xB
xD
xB
100
.65 .02
V B B 136.124, Reflux
L
L V V
170.155.
Or V F D L 136.124 100 65.969 170.155
L V B V B 1 4 1
1.25
V
V
V B
4
c)
L
y
Goes through
V
y
L
x
x
V
1 xB
xB
Calculate arbitrary point at x .6
y 1.25 .6 .25 .02
See Figure: Need 2 stages + PR
d)
65.969
.975 .02
What is V B
MIN
?
V
B
.745
V
MIN
L V
1
L V
MAX
1
3.0894 On graph.
179
180
8.D7.
y W x W in organic
yA
y A x A in organic
x A in organic
W A
in organic
0.9636 0.372
W A
in organic
8.D8.
0.0364, y W
1 0.0364
0.628, x W in organic =1-0.628=0.372
44.69
0.0364 0.628
Convert wt frac to mole frac.
MW C8 H14 O 72 14 16 102 and MW water
Basis 1000 kg
0.994 wt frac. ether:
988 kg W = 54.889 kg moles
12 kg E = 0.118 kg moles
x W in organic .998
y = 0.959 ether:
41 kg W = 2.278 kg moles
959 kg E = 9.402 kg moles
y W 0.155
y W x W in org
W - E in org
.195
.033
yE x E
z(wt) = 0.004 water:
V
min
1
1
y equil w feed
xD
min
L V
7.026
7.026 0.022
1 x
L V
L
D
1
min
.805
.967
4 kg W = 0.222 kg moles
996 kg E = 9.765 kg moles
z W 0.022
x
xD
L
18
6 kg W = .333 kg moles
994 kg E = 9.745
Total = 10.078
x W in organic 0.033
0.012 wt frac. ether:
y in equil w feed
0.9636
z
0.138
6.026 0.022
.998 .138
.998 .022
7.467;
min
Generate following equilibrium data using
L
D
0.882
11.20;
act
w E in org
L
V
0.918
act
7.026 :
xW
0
0.01
.022
.033
yW
0
0.066
0.137
0.195
181
Top Op. line:
y
L
x
V
Where L/V = 0.918, x D
Bottom: From y
x
1
L
xD
V
.998 , and y = intercept = (1 - .918) (.998) = 0.082
x B to intersection of feed line and top operating line.
xB
Obtain x B
0.0004 wt frac.: 0.4 kg W = 0.022 kg moles
999.6 kg E = 9.800 kg mole
0.0023
See plot in Figure: Optimum feed is top stage. Need 4
8.D9.
Convert to Mole fractions:
MW C6 H14 O 72 14 16 102; MWwater
3
5
equil. Contacts.
18
Basis for all conversions is1000 kg soln.
Top Layer Separator = 0.994 wt frac. ether
6 kg W = 0.333 kmole
994 kg ether = 9.745 kmol
Total
= 10.078 kmol
0.333
Mole frac. x w in org
0.033
10.078
182
xD
0.998
0.033
Bottom Layer separator is
988 kg W = 54.889 kmol
= 0.012 wt frac. ether
12 kg E = 0.118 kmol
Mole frac. x W in org
z = 0.02
0.998
xD
41 kg W = 2.278 kmol
Vapor into Condenser is
959 kg E = 9.402 kmol
yazeotrope = 0.959 wt frac. ether
Mole frac. y W
y W x W in org
W E
in organ phase
Feed is y W
0.195
0.195 0.033
y E x E in org
1 .195
7.026
1 0.033
0.02 mole frac water = z. In equil. With feed:
in org
y
x *f
L V
L D
xD
min
act
xD
0.02
1 y
z
x
0.998 0.02
*
f
0.988 0.002896
2 L D min
114.36 , L V
Plot on graph, and plot top op. line:
x 0, y 0.00868. x 0.04, y
0
0
0.9913 .04
L V
L
0.9828 ,
D
min
L D
act
1
0.01
0.066
0.00868
x
x
1
L V
57.18 ,
0.9913
L D
Top Op. y
L V x 1 L / V x D,W through y
When x = 0, y = 0.00868
7.026x
Eq. Data. y
. Generate curve,
1 6.026x
x
y
0.002896
7.026 6.026 0.02
x D,W
0.022
0.137
0.998 .
0.033
0.195
0.04833
0.03, y .9913 0.03
0.00868
x W ,bot is at intersection y = z = 0.0208 top op. line, x W,bot 0.0123
Step off stages from top down. 1 equil stage is sufficient.
But with this very high reflux rate consider alternatives.
183
8.D10.
a.
VP
C10
x C10
VP
W
xW
760
Assume the water layer is pure, x W 1.0. Try 95.5°C, VPC10 60, VPW 645.7.
(.99) (60) = 645.7 = 705.1. Too low. Try higher temperature. The attached plot of VP
vs. T allows estimation of vapor pressure. (Note: a plot of log (VP) vs 1/T will be easier
to interpolate and extrapolate.)
97.0°C: VPC10 63, VPW 682.07 , (.99) (63) + 682.07 = 744.4
97.5°C: VPC10
T = 97.6 gives VPW
65, VPW
694.57 , (.99) (65) + 694.57 = 758.9
697.1 which will be too high. Thus T = 97.5°C is close enough.
184
b.
nw
n org
p tot
VPorg x org
VPorg x org
760
65 .99
10.81
65 .99
This is significantly less than in Example 8-2 where 296.8/4.12 = 72.04 mol decane are
used. Difference is due to higher n-decane concentration in liquid.
8-D11.
x F,org 0.9, 95% recovery → 5% left. Octanol left = 0.05 (.9) (1.0) = 0.045 kmol/h
Nonvolatiles in bottoms = 0.10 kmol/h
octanol
water
x oc tan ol
in org
xF
0.045
1.10 0.045
0.3103
W
steam
185
a) Water VP can be fit to log10 VP
T = 95.5
log 0 645.67
T = 100 log10 760
B
A
A
A
273.16 T
B
over short ranges T. T in C, VP is mmHg.
273.16 95.5
B
2.8808
273.16 100
2.8100
A B 368.66
(1)
A B 373.16
(2)
To solve for A and B, subtract 1 from 2
B
B
B = 2164.42
0.07080
0.00003271B
368.66 373.16
B
A 2.8808
8.68105
373.16
Now find T for which p tot VPW x W VPO x O 760 mm Hg where x W 1.0, x O 0.3103
On Spread Sheet find T = 99.782°C
VP O x O 19.075
b) y O
0.025098 0.3103 0.007788
p tot
760
754.072
yW
x 1.0
0.99220
760
a) Moles octanol = F z O .95
1.0 0.90 0.95 0.855 kmol/h
b) Moles water
nW
Check Eq. (8-18): n W
n org
yW
y org
0.855
19.075 0.3103
8.D12. New Problem in 3rd edition. All cases
a)
D2
40
1.0 .65
.65 .55
D1
280
.35
.01
D1
B1
0.9922
0.007788
760
60, B2
108.93
19.075 0.3103
40 , D 2
B2
108.93
x P,B2
x P,dist1
x P,dist1
x P,dist 2
140
D1 140 40 180 .
b)
0.855
Total feed Col 1 = 246
1400
1440.
Total feed Col 1 = 1500
186
8.D13. New Problem in 3rd edition.
F1
D, x dist
V
L
V
L
F2
B, x bot
Part a. F1
F2 D B
Water:
F1z1 F2 z 2
100 80
D B
Dx dist Bx bot
100 .84 80 .20
Solve simultaneously, D = 99.25 and B = 80.75
V
b)
V
B 121.125, L V B 201.875
B
V
Since feed 2 is saturated liquid
L L F2 121.875
c)
Doing Mass balance around top
V y F1z1
y
L
Lx
Dx dist
Dx dist
F1z1
V
D 0.975
B 0.04
V 121.125
Doing Mass balance around bottom
V y Bx bot
y
V
L
V
x
Lx
F2 z 2
F2 z 2
Bx bot
V
These two equations are equivalent.
Slope
L
y
d) Bot. op. line:
L
V
V
V
B
V
L
x
V
V B
1 x B . Goes through y
1
V B
L
x
xB .
5 3 . Plot Bot Op. line.
121.875
1.0062
V 121.125
At intersection F2 feed line and bot op. line (at x .2, y 0.306667 ) with
slope 1.0062
2 stages + PR is more than sufficient (See graph).
Op. line above feed 2:
Slope
187
Graph for 8.D13.
8.D14. Figure is on next page.
F
Part b.
B1
B1
c)
D2
F
B2 ,
Fz
z x B2
x B1
z
x b2
x B2
x b1
x b1
D1
D2
B1x EB1
0.85 0.006
F
0.992 0.006
x b2
x d1
x d1
xd2
B2
100
B2 x E
100
B2
85.60 , B2
F B1
14.40 kmol/h
0.85 0.992
0.006 0.449
0.006 0.992
0.449 0.75
21.196
35.596 kmol/h
188
D2
D1
xE
101.3 kPa
1333
F
zE
0.75
0.449
kPa
0.85
ethanol
Water
Ethanol
99.4 mole % water
99.2 mole %
B1
8.D.15. Part a) New Problem in 3rd Edition.
p org
VPoc tan ol x oc tan ol =Ptotal where x oc tan ol is mole fraction octanol in organic phase.
At 0.05 atm and boiling T, porg
0.05 atm. 38 mmHg
From Antoine equation,
log10 VP
oc tan ol
6.8379
1310.62
T 136.05
T 129.8C, VPoctanol 80.905 mmHg
At
Since p org
p org
38
0.470
VPbenzene 80.905
Average mole wt solids and non volatile organics can be calculated. Basis 100 kg
mol octanol
15 130.23
0.470
15
85
mol octanol
mol non-volatiles
130.23 MW
0.470
b)
38 mmHg, x octanol,mole
15
85
15
MW 654.04
130.23 MW
130.23
95% recovery is true on both mass and mole basis.
Distillate octanol flow rate 0.95 100 0.15 14.25 kg h.
Since MWoc tan ol
130.23, this is 14.25 130.23
In waste there are 0.05 15
0.109 kmol h.
0.75 kg hr octanol and 85 kg h (organics + solids), or
85.75 kg h total. Wt frac octanol 0.75 85.75 0.00875.
0.75 130.23
Mole frac. octanol in waste
0.0424
0.75 130.23 85 654.04
189
c)
For equilibrium in still pot VP
oct
x oct in org
VPw 1.0
The still pot is perfectly mixed; thus x oct in org
Since water boils at 100°C when P
p tot
x oct in waste
760 mmHg .
0.0424 mole frac.
760 mmHg, T < 100°C.
Eq. (8-15) becomes VPoct 0.0424
VPw 1.0 760
Substituting in the Antoine equations for octanol and water and solving with a spread sheet, T =
99.97°C.
VPoct 19.27 mmHg and VPw 759.18 mmHg.
d)
n oct
From Eq. (8-18),
VPoct x oct
nw
p tot
VPoct x oct
From spread sheet n oct n w
Since
n oct
0.001076
0.109 kmol h, n w
water
101.27
n oct 0.001076 101.27 kmol h
kmol 18.016 kg
kmol
1824.5 kg h water in distillate.
kmol
This is a lot of steam!
8.D16.
Distillate 1: 0.997 EtOH, 0.0002 solvent. Calculate x d1,W
Distillate 2: 0.999 water, 0.00035 solvent. Calculate x D2 E
F = 100, x F,E
0.81, sat'd liq'd, x F,solv
1 .9972
0.0028
1 0.99935
0.00065
0
Find D1 , D 2 , M where Makeup is pure solvent.
0
Water:
x W M Fz W D1x D1W D 2 x D2W
0
Ethanol:
Mx E,M Fz E D1x d1,E D 2 x d 2,E
Ethylene Glycol:
Mx Esolv
1.0
Fz solv
Solving water & ethanol balances obtain: D 2
From Ethylene Glycol balance,
M 81.2316 0.0002
D1x d1,solv
Dx d 2,solv
18.7913 and D1
81.2316 kmol/h.
18.7913 0.00035 0.02282 kmol/h
Can also use overall balance instead of EG bal. Then
M D1 D 2 F 18.7913 81.2316 100 0.2290 , OK
8.D17. New Problem in 3rd edition.
Since everything now exits the bottoms, B = S + F, and x A =
FzA/(S+F), xB = FzB/(S+F), xsolvent = S/(S+F).
8.D18.
Ethanol Product:
Water Product:
F 100, z E
0.997E, 0.0002 solvent, 0.0028 water
0.9990W, 0.00035 solvent, 0.00065 ethanol
0.20 z W
0.80
190
Water bal: x WM M
Fz W
PE x EP,W
E bal:
x EM M Fz E
EG
0
x M,solvent M Fz solv
PE x EP,E
M
8.D19.
(B)
PW x WP,E
PE x EP,solv
Solve A & B for PE & PW :
(A)
PW x WP,W
PW x WP,solv where x M,solvent
80.0240 kmol/h, PE
PW
80.0240 0.00035
Overall:
F H
Ethanol:
Fz E 0 B1x E,bot 2 B2 x E,bot 2
0
Fz H H 1.0 B1x H,bot1 B2 0
Hexane:
B1
0.03201 kmoles/h
do M.B. in wts.
B2 where H = makeup hexane.
Solving simultaneously, B1
8.D20. New Problem in 3rd edition. a.
1000 0.8094
20.0074 kmol/h
20.0074 0.0002
M.B. around System. Since everything in wt. units
1.0
8000.04, B2
1000
F
Ex E,Ethanol prod
2000.04 and H
0.08 kg/h.
E W
Wx E,wprod
809.4 0.998E 0.0001W
808.3
E
811.0 kmol h
0.9979
W F E 1000 811 189.0
b)
V
V
Fx WF
boilup ratio
L
L
Ex W ,Ethanol prod
1000 0.1906
y w ,1
V E Pr od
811.0 0.002
0.300
629.93
811.0
629.93
0.777
V E Pr od. 629.93 811.0 1440.93
L F sat 'd liquid feed 1440.93 1000
440.93
If CMO strictly valid then, L
reflux
440.93
Can also estimate L from _ settler
Pentane flow rate in V1
Ethanol flow rate in V1
Ethanol lost in Water Product.
Pentane flow rate
y P,1V1
629.93 0.6455
406.62
191
Ethanol flow rate in V1
y E,1V1
629.93 0.0555
E in V1 E lost
x E,reflux
L from settler to Col1
Ethanol lost in water product
Lfrom _ settler _ calculation
W prod x E in Wprod
189.0 .0001
1. CMO not totally valid
2. There is some water in reflux
3. K dE value may be incorrect.
Ethanol returned to distillation column
V1 y E1 WPr od x E,W Pr od 34.96 0.0189
Using average estimate for L 0
Then 34.91
0.0189
441.6
Match not perfect because:
c.
34.96
440.93 441.6
2
34.19 kmol h.
441.3
441.3 x E in pentane
x E,pentane
Then since assume K d
0.0792
x E,Re flux,pantane _ layer
1, x E,Water layer
0.0792
192
d.
x E,water
0.0792
V1
V
W
0.5
V
0.5W
L
1
L
283.5
V
94.5
y E1
y E1
W
94.5 kmol h.
W V
283.5 kmol h.
3
L 0.0792
W .0001
V
283.5 .0792
189.0 .0001
94.5
0.237
189.0
x E,W Pr od
0.0001
8.D21.
193
L
Bottom:
V
V B 1
1.5
L
L
1 xB .Goes through y
V B
0.5
V
V
Feed line = Horizontal (q = 0). Through y = x = z = 0.4
Top. MB: yV Lx Dx D and V L D
y
3, y
L
x
x
x
x B with slope = 3
L
1
x D goes through y x x D 0.975
V
V
Intersects Feed line where bottom op line does.
Opt. Feed #1 above reboiler. 3 equilibrium stages + PR is sufficient.
8.D22. New Problem in 3rd edition.
D, x dist
Reflux
L
V
B
F
Part a. F
D
Part b. yV
y
D B & Fz
z x bot
x dist
x bot
F
Dx dist
Bx bot
0.20 0.08
0.975 0.08
100
13.41 kmol/h and B
Lx Dx dist
L
V
x
D
V
x dist
Substitute in D
Points on operating line: y
x
x dist
F, L
B, thus slope
L V
L
V L to obtain y
0.975 and x
Alternative point is at feed line (y = z = 0.2) & x
V
86.59
x bot
1
0, y intercept
L
V
1
x dist
L
V
x dist
0.08
B F 86.59 100
1 0.8659 0.975 0.1307
Part c. Need 2 Stages. See graph.
Part d. Pinch at feed line intersection with equilibrium is at x
V
x
0.8659
y intercept
0.02 .
194
Figure for problem 8D22.
195
8.D23. New Problem in 3rd edition.
Water phase
XNM = 0.086
N.M. Phase
NM
xw = 0.312
W
F
Water
Product
Nitro Methane
Product
Part a. External balances F
NM Pr od
WPr od
NM :
F .25
NM Pr od
.25
.01
.98 .01
NM Pr od .98
100
WPr od .01
24.74, WProd
75.26
a. W Column:
z = .25, horizontal feed line
L
L
Top
y NM
x NM
1
x NM ,bot ,col NM Mass balance through top of W column
V
V
and around col. NM. Can easily show that
196
y NM x NM x NM,bot,col NM
But do not know L/V so cannot plot yet.
Bottom operating line looks familiar:
y NM
x NM
x NM,bot,col w
V
L
x
V
1 x NM ,bot col w
0.01
L
V B 1
54
V
V B
14
col w
L
y NM
5
Can plot bottom operating line. Arbitrary point: x
0.2, y 5 0.2 .01 .96
Now can plot top operating line from intersection of bottom operating line and feed line to point
y NM x NM x NM,bot,col w 0.01
See graph. Need PR + ~ 1 2 stage. Build PR + 1 stage.
yw
b. NM Column is a stripping column:
L V
To plot,
V
1
B
V
B
col NM
yw
xw
xw
.3, y w
Need PR + ~ 1
c. W col. Want V. V
1
3
3
B
0.02
1
.3
3
.02
0.3933
xw
0.3 is arbitrary point
stages.
100 V, V=
V
1 x w ,bot ,col NM
3
V
B
B
V to cond. from Wcol
NM col want V. V=
L V
4
x w,bot,NM _ col
4
L V xw
B
3 NM Pr od
1
WProd
1
75.26 18.81
4
4
118.81 kmol hr
3 24.74
74.22 kmol hr . To condenser.
197
Graph for 8.D23.
198
8.D24. New Problem in 3rd edition. From Equilibrium, y bu tan ol
Overall Mass Balance: 100 F V B
Butanol MB:
100 0.025 V .092
2.5
.092 V
0.092 at x bu tan ol
0.004
B .004
F V .004
2.1 .088V V 23.864, B 76.136 kmol hr
This problem can also be solved graphically, but using basic mass balances is easier.
8.D25. New Problem in 3rd edition. Part a)
VPbenzene x benzene where x benzene is
porg
mole fraction benzene in organic. At boiling T, p org
From Antoine equation, log10 VP
At T
93 C, VPbenzene
p org
1.0 atm.
1211.033
6.90565
benzene
T
220.790
1112.44 mmHg . Since
760, x ben,mole
p org
760
0.683
VPbenzene 1112.44
Average mole wt solids and non volatile organics can be calculated. Basis 100 kg
0.683
0.683
b)
Moles benzene
Moles benzene + Moles non-volatiles
20
80
20
80 .683
20
78.11
MW
78.11
MW
78.11
1 .683
20 78.11
20
80
78.11 MW
MW
673.2
90% recovery is true on both mass and mole basis.
Distillate benzene flow rate 0.9 100 0.2 18.0 kg h .
Since MWbenzene 78.11, this is 18 78.11 0.230 kmol h
In waste there are 2.0 kg/h benzene and 80 kg/h (organics + solids), or 82 kg/h total.
Wt frac benzene 2 82 0.0244
2 78.11
Mole frac. benzene
0.1773
2 78.11 80 673.2
c)
For equilibrium in still pot VP
b
x b in org
VPw 1.0
The still pot is perfectly mixed; thus, x b in org
Since water boils at 100ºC when P
boils at 80.1ºC, but mole fracs low.
p tot
x b in waste
760 mmHg
0.1773 mole frac.
760 mmHg, T 100 C . Benzene is more volatile and
Antoine equation for water: log10 VPw
8.68105
2164.42
273.16 T
760
VPb 0.1773 VPw 1.0
Substituting in the Antoine equations for benzene and water and solving with a spread sheet,
T 92.0411 C . VPben 1082.5 mmHg and VPw 568.1 mmHg.
Eq (8-15) becomes
199
d)
n ben
From Eq. (8-18),
VPben x ben
nw
p tot
VPben x ben
From spread sheet n ben n w
n ben
Since
0.337876
0.230 kmol hr, n w
water
0.6807
n ben 0.337876
kmol 18.016 kg
kmol
kmol
n ben
e. To vaporize benzene condense moles water
ben
0.6807 kmol hr
12.264 kg h water in distillate.
.
w
This occurs at 92.0411 C
365.1911K; From Perry’s table 2-237,
H
hg
h
hf
H
h kJ kg
T = 360
886.7
498.7
388
T = 370
898.6
518.1
380.5
5.1911
0.0911
w
5
x 380.5 388
2265.67 2278.3
Moles water condensed
2278.3
388
384.1
kJ
30, 002 kJ kmol.
10
kg
Note: 8th edition, Table 2-193 is very slightly different after unit conversion.
T = 360
2663
384.7
2278.3
Water Table 2-352.
T = 370
2671
405.88 2265.67
Linear interpolate
2277.8 kJ kg
41,037 kJ kmol
0.230 30, 002
kg h water in waste
0.1682 kmol h water (in waste)
41037
0.1682 18.016 3.029 kg h
200
8.E.1. New Problem in 3rd edition.
Water phase
XNM = 0.086
N.M. Phase
F2
xw = 0.312
NM
W
Water
Product
Nitro Methane
Product
250
Part a.
F1
F2
NM balance
PNM
PW
F1z1NM
F2 z 2 NM
PMN x
NM Prod
Pw x
NM mol frac
135.5 8 127.5
135.5
PNM
Pw
b.
F1
PNM
PNM .98
250 PNM
w Pr od
NM mol frac
Pw 0.01
0.01
.97PNM
2.5
133 .97 137.11 kmol hr
250 137.11 112.89
Column W – Use y NM vs. x NM (water phase) plot.
Top operating line
y NM
L V
Bottom Operating Line y NM
L V
L V
V B
V B 1
43
V
V B
13
water
col
water
col
x NM
1 L V
x NM
L V
V
4.
L
V
wcol
water
col
F2 z NM 2
x NM
NM Pr od
Vwcol
1 x NM
Water Pr od
V
B col w 37.63 V
.
B
B col w 150.52 L F1
201
y
Top IS NOT from
x
x NM
0.98 to intersection feed and bottom operating line.
NM Pr od
Instead from intersection of feed and bottom operating line with slope
L V
L F1
V
50.52 37.63 1.32 25 .
Optimum feed is top stage. Need PR + 1 stage.
c.
Column NM. Top y
Bottom
yw
L V
L V
yw
xw
NM
col
xw
NMcol
F1z1,NM
1 L V NM x w
col
xw
L V
xw
1 xw
NMcol
in WM Prod.
L
0.02.
V
W,W Prod.
V B 1
2.00
V
V B
Draw bottom operating line. Top is through intersection bottom operating line and feed line F 2 .
Slope L V 0.906 (see item d). Need 2 stages + PR. Optimum feed is stage above PR.
d.
Column W: PW
V
Bcol w
NM Pr od
112.89
V B Bcol w
1 3 112.89
L
V Bcol w
Saturated liquid feed: V
Column NM:
37.63
V
37.63
V B
hr.
PNM
1
50.52.
Bcol NM
137.11
2.0
V B
V
L F
kmol
V B 1.0,
L V
L
150.52.
V B B 137.11 kmol hr,
L
2.0 137.11
274.22
V 137.11,
L L 150 124.22 , L V 0.906.
Minimum boilup rate NM column gives combination bottom & top operating lines to go through
Saturated liquid feed V
e.
reflux point: y W
0.5, x w
0.312 .
From bottom operating line intersection with feed line
y INTER
L
x
z2
0.15 is
L
1 x W ,NM Prod
V
V
Slope of top operating line to reflux point is
L F2
L 0.5 y INTER
V
V B
Guess V B
z2
0.312 0.15
V
1
L V
L V 1
V
.
Calc V & L & L V
V
V B B 137.11 V B .
Calc y int er
Calc L V
L
V
B
L F2
V
Check is two calculated values L V are same.
202
Spreadsheet.
V B
MIN
0.6105,
L V
0.846
Graph for Problem 8.E1.
203
8.E2.
Balances at mixing point for F & R.
To Butanol Column:
Overall:
FT F R
Water:
FT z T,W
100 R
Fz W
Rx W,reflux
R .573
z T,W
FT z T,W
30 0.573R
30
100 R
External balances: 100 = W + B,
water: 30 = 0.995W + 0.02 B
Solve simultaneously: W = 28.72 & B = 71.28 kmol/h
Butanol Col:
FT
V B 1.90, V 1.90B 135.432
L
y
R
zT
V B
x
FT
206.712,
x W,butonal
F
L V 1.5263
0.02
206.712 100 106.712
106.712 0.573
30
0.4409
206.712
Vertical feed line at z T intersects bot. operating Line at y = 0.67 (see graph)
Water Col.
V B
0.1143,
y
L V
L V x
V B
V B 1
V
V B
9.748
L V 1 x B,water,watercol, y
x
x
B,W
watercol
0.995
See graph, y leaving column = 0.8
204
205
8.E3.
Basis: 1000 kg sea water (1 h):
965 kg water kmol 18.016 kg
35 kg NaCl kmol 58.45 kg
53.5635 kmol, x F,W
0.98894
0.5988
kmol, x F,salt 0.011056
Total 54.1623
Water Condensate = (0.60) (53.5635) = 32.1381 kmol/h = n W
Water Remaining 53.5635 – 32.1381 = 21.4254
21.4254 kg moles W
Waste Water is
0.9728 mole frac. water
21.4254+0.5988 salt
a. In still, organic phase is pure decane.
VPC10 VPW x W p tot 760 mmHg where x W
0.9728 .
Try T = 99°C. VPC10 ~ 68,
VPW 733.2 mm Hg
68 + (0.9728) (433.2) = 781.27 mm Hg, which is too high.
Converge to T ~ 98.2°C.
707.27 0.9728
nW
yW
pW
VPW x W
b. Distillate:
10.4225
n org y org p org VPorg x org
66 1.0
(This calculation is at 98°C, not 98.2, but will be close.)
206
n C10
8.F1.
32.1381 kmol water/h
10.425 mol water/mol organic
3.0819
kmol
h
C10 in distillate
V.P. Data n-nonane (p. 3-59 Perry & Green, 1984)
VP = 20
T = 51.2
40
66
60
75.5
100
88.1
200
107.5
400
128.2
See Solution problem 8.D10 for plot. MWnC9
1984), nonane enthalpies are,
128.25 .
hliquid
671.3 KJ/kg
722.5
Hgas
998.2
1036.5
T
360 K
380 K
760 mm Hg
150.8°C
From p. 3-268 (Perry & Green,
Water VP is given in Problem 8-D10 and on p. 3-45 of Perry and Green (1984).
a. Try 95.0°C. VPC9 127 mm Hg, VPW 633.9 . Assume water is pure.
Pressure: (.99) (127) + (1.0) 633.9 = 759.6. Close enough and lucky!
b.
p tot
nW
n org
VPorg x org
760 127 .99
127 .99
VPorg x org
5.045 mol water/mol nonane
c. Need to calculate the energy required to vaporize the nonane. T = 273 + 95 = 368 K.
By linear interpolation for pure nonane: h1 ~ 691.78, Hgas ~ 1013.52. nonane 321.74 KJ/kg
Table 3-302 of Perry and Green (1984): h liq,W
397.36, H vap W
2667.8,
W
2270.44 KJ/kg
mol water condensed
C9
321.74 KJ/kg 128.25 kg/kmol
mol C9 vaporized
W
2270.44 KJ/kg 18.016 kg/kmol
b. Now, VPC9
.020
VPW
1.009
760. Temperature will be higher.
Try 99°C: VPC9 149 mm Hg, VPW 733.24
(149) (.020) + 733.24 = 736.22 which is too low.
Try 99.9ºC: VPC9 154, VPW 757.29
154 (.020) + 7570.29 = 760.37. Close enough.
The low nonane conc. reduces nonane partial pressure and operation is much closer to 100°C.
p tot
VPorg x org 760 154 .02
nW
245.75
n org
154 .02
VPorg x org
Need lot more steam!
207
8.F2.
n-nonane
water
F = 1000
95% n-nonane
organic
waste
steam
water
a)
Basis: 1 hour
All junk in feed (0.50 kmol) is in bottoms
Organic Bottoms is 0.95 n-C9 0.5 junk
1.45 (see part C)
.95
x C9,bot ,org
0.65517
1.45
b) Still T.
p W p org p tot 102.633 kPa 770 mm Hg
pW
porg
VPW (T)x W where x W
K C9 T x c9,org,bot
K C9 T
1
0.65517 770 mm Hg
Procedure: Guess T, determine VPW & K C8
VP
W
504.481K C9
check if pressure eq. is valid
770 mm Hg?
0.16 (DePriester Chart)
652.62 80.717 738.34 Need higher T
T = 97°C, VPW 682.07 and K C9 0.17
682.07 + 85.762 = 767.83 slightly low, but close enough
Try T = 96°C
VPW
504.481 K C9 T
657.62, K C9
c) 9.50 kmol n-nonane × .90 = 8.55 kmol n-nonane in distillate. 9.5 – 8.55 = 0.95 kmol n-C9 in
bottoms
n org p org 85.762
n org
8.55
d) Eq. (8-18)
0.12567, n W
68.031 kmol water
nW
p W 682.07
0.12567 0.12567
e) EB simplies to
W
n W,condensed
n W ,condensed
nonane
C9
W
n org,dist. where λ’s are at 97°C = 370 K.
n org,dist.
8.55 kmol
C9
W
208
From Perry’s 6th ed. Table 3-268 or 7th ed. Table 2-292, nonane λ’s are:
h g h f , @ 360 K,
998.2 671.3 326.9 kJ/kg
380 K,
1036.5 722.5
326.9 314
@ 370 K, λ ≈ 320.45 kJ/kg
2
MW C9 128.258 . Then at 370 K,
kJ 128.258 kg
41,100.3 kJ/kmol
kg
kmol
Water 370 K: (Perry’s 6th Ed., Table 3-302).
kJ 18.016 kg
kJ
2671 405.8 2265.2
40,809.84
W
kg
kmol
kg
41,100.3
n W ,cond
8.55 8.611 kmol water
40,809.84
C9
320.45
314.0 kJ/kg
8.G.1. New Problem in 3rd Edition.
1. Final makeup solvent flow rate _________0.02__________ kmol/h.
2. Final value solvent recycle rate (B2) __1400___kmol/h and L/D in col 1 _0.100_.
3. Final values of flow rates D1 _140.0_, B1 _1460.02_, and D2 __60.02___ kmol/h.
4. Mole fractions in stream D1 _Pyr=0.0084259, W=0.99157, Bisphenol=.49E-10_
5. Mole fractions in stream D2 _Pyr = 0.98001, W = 0.019654, Bisphen = .000333___
6. Mole fractions in stream B1 _Pyr=0.040287, W= 0.0008079, Bisphen = 0.95890_
7. Mole fractions in stream B2 (solvent recycle stream) Pyr = .526E-8, W = .2E-12, Bisphenol =
1.0000__
8. Heat load in cooler on solvent recycle line__-0.15216E8___ cal/s.
8.G2. New Problem in 3rd edition.
Aspen Plus Residue Plot 4.0 atm using NRTL
Pressure can have major effect on VLE for non-ideal systems. Compare T-xy diagrams for
acetone MEK at 1.0 and 4.0 atm.
Also compare residue curves for acetone-MEK-MIBK at 1.0 & 4.0 atm.
209
210
211
8.G3. New Problem in 3rd edition.
a. Final reflux ratio column 1___0.01_ and final reflux ratio column 2 _0.01_______. If these values are
not 0.01 you are not finished with Part B.
b. Flow rates furfural product ___166.0___ kmol/h and water product ___34.0__ kmol/h.
c. Boilup rate in column 2 _____8.0________ kmol/h.
d. Mole fraction furfural in furfural product ____0.99816___& mole fraction water in water product
___0.99102____.
e. Flow rate of distillate from column 1 _____42.10_____ kmol/h.
f. Column 1 condenser temperature __370.3___K, & column 1 reboiler temp. __433.59__ K.
g. Outlet temperature of decanter ____375.2______ K.
h. Molar ratio of water phase/total liquid in decanter _____0.8393_____
8.G.4. New Problem in 3rd edition.
Column 1: a. Bottoms product mole fraction acetonitrile______0.99915______
b. Distillate flow rate ___240____ kmol/h and bottoms flow rate ___170____kmol/h.
c. Distillate mole fraction acetonitrile ____0.67910___________ .
Column 2: a. Distillate flow rate ___210_______ kmol/h, and reflux ratio ___1.2____.
b. Bottoms product mole fraction water______0.99517______________ .
c. Distillate mole fraction acetonitrile _____.77542__________ .
8G5. New Problem in 3rd edition.
Results are residue curves and profiles of mole fraction vs plate location. For an equal molar feed, N = 10
does not give the desired purity even if L/D = 10. N = 50 does work with L/D = 2, but not for L/D = 1.0.
8.H1. Part b. Was 8.D12 in 2nd edition of SPE. Use Eq. (8-25b) with
2.4, BB 1.0, BC 0.21.
AB
A = benzene, B = toluene, C = cumene. Results from Spreadsheet:
Stage: Reboiler:
x A 0.0003
x B 0.0097
1
0.003298
0.04443
2
0.03137
0.176085
3
0.18019
0.42145
4
0.46126
0.44952
5
0.70274
0.28536
6
0.85421
0.14453
7
0.93403
0.06585
8
0.97145
0.028535
9
0.98791
0.012091
10
0.99493
0.005074
11
0.99788
0.00212
12
0.99912
0.000885
x C 0.990
0.95227
0.79255
0.39836
0.08923
0.01189
0.001265
0.000121
1.102 E-5
9.802 E-7
8.637 E-8
7.580 E-9
6.641 E-10
8.H2. Was 8.D13 in 2nd edition of SPE. Use a spreadsheet with Eq. (8-30) as recursion equation.
Result is shown in Figure. The VBA program was given in Example 8-3. The results obtained
for the starting conditions given are:
k
xA
xB
xC
1
0.990
0.001
0.009
100
0.9763
0.0017
0.0220
200
0.9431
0.0029
0.0534
300
0.8630
0.0049
0.1331
212
400
450
475
500
600
0.6740
0.5044
0.3946
0.2696
0.00042
0.0077
0.0089
0.0092
0.0089
0.00095
0.3183
0.4867
0.5962
0.7214
0.9986
Results for other starting conditions are shown in the figure.
213
Figure for problem 8H2.
8H.3. New Problem in 3rd edition. The spread sheet including the first 10 time steps and time steps 600
to 610, and the VBA program are listed.
Part a
214
Simple distillation calc (residue curves) with BP calcs.
aT1
aT6
ap1
-1166846 7.72668
-0.92213
-1280557 7.94986
-0.96455
-1481583 7.58071
-0.93159
-1524891 7.33129
-0.89143
-1778901 6.96783
-0.84634
iB
nB
iP
nP
nhex
Residue curve calc.
x1iB
sumx
time step
1
2
3
4
5
6
7
8
9
10
0.98
1
xiB
0.98
0.979883
0.979764
0.979645
0.979525
0.979405
0.979283
0.979161
0.979037
0.978913
600
601
602
603
604
605
606
607
608
609
610
0.009754
0.009586
0.009418
0.009253
0.009089
0.008927
0.008766
0.008608
0.008451
0.008296
0.008142
0.071054
0.069204
0.067391
0.065615
0.063874
0.06217
0.060502
0.058869
0.057271
0.055708
0.054179
h
x1nB
T1guess,R
xnB
0.01
0.010032
0.010065
0.010097
0.01013
0.010162
0.010195
0.010228
0.010261
0.010294
0
0
0
0
0
0
0
0
0
0
0
0.01
0.01
500
xiP
0
0
0
0
0
0
0
0
0
0
0.919192
0.92121
0.923191
0.925133
0.927037
0.928903
0.930732
0.932524
0.934279
0.935997
0.937678
N
x1iP
p,psia
xnP
0.01
0.010085
0.010171
0.010258
0.010345
0.010433
0.010522
0.010612
0.010702
0.010793
1000
0
14.7
x nHex
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
542.3988
542.71
543.0165
543.3183
543.6155
543.9078
544.1955
544.4783
544.7563
545.0295
545.2978
epsilon
1E-09
x1nP
0.01
x1nHex 0
TR
472.0604
472.0642
472.068
472.0718
472.0757
472.0797
472.0836
472.0876
472.0916
472.0956
Option Explicit
Sub Residue_Curve_BPcalc()
' K value data for nbutane,ibutane, ipentane,npentane and nhexane included.
' Only want 3 for residue curve. Thus, set x values = 0 for 2 components.
' The reference component is nbutane.
Dim i, N, j As Integer
Dim h, epsilon, xiB, xnB, xiP, xnP, xnHex As Double
Dim T, p, aT1iB, aT6iB, ap1iB, aT1nB, aT6nB, Ap1nB As Double
Dim aT1iP, aT6iP, ap1iP, aT1nP, aT6nP, ap1nP, aT1nHex, aT6nHex, ap1nHex As Double
Dim KiB, KnB, KiP, KnP, KnHex, Ksum, chksum, inside As Double
Dim yiB, ynB, yiP, ynP, ynHex As Double
Sheets("Sheet1").Select
215
Range("A15", "G1045").Clear
aT1iB = Cells(5, 2).Value
aT6iB = Cells(5, 3).Value
ap1iB = Cells(5, 4).Value
aT1nB = Cells(6, 2).Value
aT6nB = Cells(6, 3).Value
Ap1nB = Cells(6, 4).Value
aT1iP = Cells(7, 2).Value
aT6iP = Cells(7, 3).Value
ap1iP = Cells(7, 4).Value
aT1nP = Cells(8, 2).Value
aT6nP = Cells(8, 3).Value
ap1nP = Cells(8, 4).Value
aT1nHex = Cells(9, 2).Value
aT6nHex = Cells(9, 3).Value
ap1nHex = Cells(9, 4).Value
h = Cells(11, 4).Value
N = Cells(11, 6).Value
epsilon = Cells(11, 8).Value
xiB = Cells(12, 2).Value
xnB = Cells(12, 4).Value
xiP = Cells(12, 6).Value
xnP = Cells(12, 8).Value
xnHex = Cells(13, 8).Value
T = Cells(13, 4).Value
p = Cells(13, 6).Value
For i = 1 To N
j=i+1
Do
KiB = Exp((aT1iB / (T * T)) + aT6iB + (ap1iB * Log(p)))
KnB = Exp((aT1nB / (T * T)) + aT6nB + (Ap1nB * Log(p)))
KiP = Exp((aT1iP / (T * T)) + aT6iP + (ap1iP * Log(p)))
KnP = Exp((aT1nP / (T * T)) + aT6nP + (ap1nP * Log(p)))
KnHex = Exp((aT1nHex / (T * T)) + aT6nHex + (ap1nHex * Log(p)))
Ksum = KiB * xiB + KnB * xnB + KiP * xiP + KnP * xnP + KnHex * xnHex
KnB = KnB / Ksum
inside = aT1nB / (Log(KnB) - aT6nB - (Ap1nB * Log(p)))
T = Sqr(inside)
chksum = Ksum - 1
Loop While Abs(chksum) > epsilon
Cells(13 + i + 1, 1).Value = i
Cells(13 + i + 1, 2).Value = xiB
Cells(13 + i + 1, 3).Value = xnB
Cells(13 + i + 1, 4).Value = xiP
Cells(13 + i + 1, 5).Value = xnP
Cells(13 + i + 1, 6).Value = xnHex
Cells(13 + i + 1, 7).Value = T
yiB = xiB * KiB
216
ynB = xnB * KnB
yiP = xiP * KiP
ynP = xnP * KnP
ynHex = xnHex * KnHex
xiB = xiB + (h * (xiB - yiB))
xnB = xnB + (h * (xnB - ynB))
xiP = xiP + (h * (xiP - yiP))
xnP = xnP + (h * (xnP - ynP))
xnHex = xnHex + (h * (xnHex - ynHex))
Next i
End Sub
217
Chapter 9
New Problems and new solutions are listed as new immediately after the solution number. These new
problems are: 9.A4, 9.A5, 9C1, 9D1, 9.D5, 9.D8, 9D11, 9D13, 9D18, 9D19, 9D21, 9D22, 9D25, 9E2, 9.H1.
9.A4. New Problem in 3rd edition. Answer is g.
9.A5. New Problem in 3rd edition. Answer is c.
9.A6.
b. The same.
9.B1.
Multi Stage
F, x F , x Davg , N, L / D, Treflux , P
Single Stage
F, x F , x Davg , P
F, x F , x Wf , N, L / D, Tr , P
F, x F , x D tot , P
F, x F , Wfinal , N, L / D, Tr , P
F, x F , x wf , P
F, x F , D tot , N, L / D, Tr , P
F, x Wf , Wfinal , P
F, x F , x Davg , x Wf , N, Tr , P
x F , x Davg , D tot , P
F, x F , x Davg , x Wf , L / D, Tr , P
x F , x Wf , Wfinal , P
x F , x Davg , D tot , N, L / D, Tr , P
x F , x Wf , D tot , P
x F , x Davg , D tot , x Wf , N, Tr , P
F, x F , x Davg , x W
x F , x Davg , D tot , x Wf , L / D, Tr , P
etc.
x F , x Davg , Wfinal , N, L / D, Tr , P
x F , x Wfinal , Wfinal , N, L D, Tr , P
etc.
9.B2.
a. Replace the column with one containing more trays or more packing.
b. Retray or repack existing column.
c. Run a batch in several steps. For example, take the feed and operate so that the desired bottoms
concentration is met. Collect all the distillate and use this as the feed for a second batch. Operate
so that the distillate for this run meets specifications. The bottoms from this run can be used as
feed for a 3rd run, or it can be mixed with the next feed batch.
An alternate is to first collect distillate of desired purity. Then collect distillate which does not
meet purity requirements while bottoms is reduced to the desired purity. The material not
meeting requirements is then mixed with fresh feed for next batch.
Other operating variations are possible.
d. Hook up two batch stills in series – Either to run 1 batch or to run separate batches (second still
takes distillate from first as the charge).
e. See if product specifications can be relaxed.
f. Reducing the pressure increases the relative volatility and may help. However, one must watch
for earlier flooding.
9.C.1. Rayleigh eqn
xF
Wfinal
F exp x W,fin
d xW
xD
xW
218
Because x D
constant, can integrate analytically.
xF
xF
d xW
xD
x w ,final
Wfinal
n xD
xW
F exp
Wfinal
xD
xF
xD
F
x W ,final
xD
xD
xD
xD
xF
x W ,final
xF
x W ,final
D
Wfinal x W,final
xD
F
xD
Wfinal
Fx F
Solve for
n
x w ,final
n
F
Mass balances are
xW
D xD
xF
x W ,final
Thus results are identical.
9.C2.
External balances over entire cycle
Fz Dx Dfinal Wx wAvg and F = D + W
a. Ignoring holdup on stages and in reboiler
- Out = Accum in accumulator is
- x w dD
x w dD
which becomes,
dD
Rearrange,
Ddx D
dx D
D
D final
dD
x Dfinal
D F
D
xD xF
xW
dx D
xw
xD
xD
d Dx D
x D dD
and integrate,
which is,
n
D final
F
x D final
xF
dx D
xD
xw
b. Assume CMO and draw mass balance envelop around bottom of the column.
L
y
y
L
V
L
V
V
x
x
B
Lx
Vy Bx w
B
xw
V
L
V
1 xw
219
xF
Wfinal
rd
9.D.1. New Problem in 3 Edition. Eq. (9-9)
F exp x W,final
From Simpson’s rule
0.1 0.00346
Area
0.00346
0.05173
0.1
y
4
x
0.00346
y-x
0.03096
.34
0.4416
y-x
1
6
From equilibrium curve (Table 2-1).
x
y
dx
y
1
x
y
x 0.005173
x
0.1
1
y-x
36.366
3.469
2.9273
0.027498
.28827
.3416
The y values are found by linear interpolation of data in Table 2-1. For example, at x = 0.00346,
linearly interpolated first 2 data pts Table 2-1.
0.170
y
x for x 0.19.
0.019
0.170
y
0.00346 0.03096
For x = 0.00346,
0.019
For y at x = 0.1,
y = 0.4375 +[ (.4704 - .4375)/(.1238 - .0966)](.10 - .0966) = 0.4416
[Alternatively, could fit equilibrium data to constant α.]
0.1 0.00346
Area
36.366
6
Wfinal
0.5 exp
D total
0.5 .2125
F xF
x DAvg
9.D2.
Rayleigh equation is Wfinal
0.8555
0.2125 kmol
.5 .1
D avg
.75
0.8555
0.2875 kmol
Wfinal x W ,final
F exp -
2.9273
.2125 .00346
0.2875
0.1714
dx
y-x
Most of values of 1/(y – x) are listed in Example 9-1. From Table 2-7 can easily generate
values for x = .55: y = 0.805, y – x = .255. (y – x)-1 = 3.92. The mid-point for Simpson’s rule is at x = .65. Then from Eq. (9-12) and values in Example 9-1,
.75 dx
.2
3.92 4 5.13 6.89 1.044
x 6
.55 y
Wfinal
x Davg
100e
Fx F
.55
1.044
35.20, D total
75
Wfinal x final
D total
F Wfinal
Operating equation is y
64.8
35.2 0.55
64.8
A graphical integration counting squares gives x Davg
9.D3.
4 3.469
L V x
1
220
L V
0.859
0.861.
x D where L V
L0 D
1 L0 D
0.65
This is y = 0.65 x + 0.35 x D
We have two equil. stages (stillpot and one in the column). From McCabe-Thiele diagram
we can get the values of x D which are related to x W . Pick x D and get x W from figure.
From this we can generate the following table (only two values are shown in Figure).
xD
0.90
0.895
0.85
0.837
0.720
0.70
x w ,final
xW
Raleigh Equation:
D total
x Davg
3.205
3.077
2.193
2.096
1.754
1.748
Wfinal
xF
F
x wfinal
100 39.7
Wfinal x wf
0.36 ]
3.077 4 2.096
6
F Wfinal
Fx F
0.588
0.570
0.394
0.360
0.150
0.128
.57 .15
dx w
xD
1/(xD-xW)
[Midpoint x w
Simpson’s rule (Eq. (9-12)).
xf
xW
dx
xD
xw
, Wfinal
1.754
Fe
0.925
0.925
39.7 kmol
60.3 kmol
100 0.57
D total
39.7 0.15
60.3
221
0.847
9.D4.
Wfinal
2.0 kg moles, x F
0.4 . Find F, x DAvg , D total
0.8, x wf
x
1
y(equil)
y
1
16.66
y x
4.76
7.143
.4
.6
.8
x
0.80
0.86
16.666
0.70
0.80
10
0.60
0.74
7.143
0.50
0.67
5.882
0.40
0.61
4.76
Can use Simpson’s Rule (Eq. 9-12) or evaluate numerically.
xF
dx
0.4
4.76 4 7.143 16.666
x
6
x Wfin y
Wfinal
F
Rayleigh eqn
xF
exp
x Wfin
D total
2.0
F Wfin
Fx F
x D AVG
exp
dx
y x
3.3333
Wf x Wfin
56.063 kmol
56.068 0.8
2.0 .4
54.063
Wfinal
a)
3.3333
54.063 kmol
D total
9.D.5. New Problem for 3rd Edition
F exp
xF
x w ,fin
dx
y
x
Can use Simpson’s rule, eq. (9-12) with equilibrium values from plot.
1
1
f x w ,final
2.7397
y x 0.028 0.645 0.28
f
x w ,fin
f xF
xF
1
2
y x
1
0.705 0.52
0.40
1
1
y x
0.735 0.52
0.52
x
3.2787
4.65116
222
0.815
xF
xF
dx
x w ,fin
y x
0.52 0.28
3exp
y D,avg
b. Settler:
6
f x w ,fin
2.7397 4 3.2787
6
Wfin
x w fin
0.8202
D V,tot
D1
DV,tot y D,avt
Use eq. (9-13)
n
WF
F
6
20.5056
1.321 , DV,tot
F Wfin
0.8202
1.6790
0.7088
D2
1.6790
D1x 2
D1
D2 x B
Solving simultaneously, D 2
9.D6.
f xF
0.24
4.65116
3 0.44033
Fz Wfin x w fin
D V,tot
4f x w avg
D2
1.6790 0.7088
0.567 and D1
1
1
n
1.112
x W ,F 1 x F
x F 1 x W ,f
223
0.573 D1 0.975 D 2
n
1 xf
1 x W ,f
a) F = 1.3, x F
n
.6, x Wf
WF
1
1 3
1.4
WF 1.3
Fx F
.3 4
WF
.4
n
.6 7
1.3 0.6
0.3036 0.3
0.6914
1.3 0.3036
0.2335
Wf
0.81725
0.81725 0.3
3.5 0.8125
0.6, x DAVG 0.75
2.0, x F
0.8948 0.5596 1.4544
.7
0.3036 kmol
Wfin x Wf
3.5 0.6
x D AVG
Since
2.4
F Wfin
b) Now Wf 3.5
F
n
0.2335
x DAVG
c)
.3,
F Wfin x D AVG
Fx F
0.6914
x D AVG
Wfin
Wfin x Wf ,
F
x D AVG
xF
x W ,f
.
Then Eq. (9-13) becomes
n
0.75 .6
0.75 x Wf
L D 1/ 2, L V
L D
1
1 L D
3
x D AVG
xf
1
x D AVG
x Wf
1.4
F x D AVG
0.5025 . Wfinal
Solution is x w fin
9.D7.
n
x D AVG
xf
.6 1 x Wf
1 x Wf
1.212 kmol.
.75 0.5025
1
xD
xW
1
xW
xD
0.11
0.10
0.09
0.44
0.38
0.26
4
n
slope . Pick series x D values. Plot enriching section op
xD
0.49
x Wf .4
2.0 .75 0.60
x Wf
line. Step off two stages. Find x W . Calculate
0.56
n
xW
, determine
dx
xF
x Wf
xD
xW
f
1/.45 = 2.2222
Interpolate 2.361
1/.40 = 2.50
0.06
0.05
0.02
1 .38
2.6316
1 .33 3.0303
1/.24 = 4.1666
Simpson’s Rule
dx
xF
x Wfin
xD
xW
xF
x Wf
6
f x WF
0.10 0.02
6
224
0.02
4f x W
4.1666 4 2.6316
0.06
2.361
f xF
0.10
0.22739
WFinal
x DAvg
4.0 exp
Fx F
0.22739
Wf x Wf
4 0.7966
4 .1
F Wf
3.1864 0.02
4 3.1864
9.D8. New Problem 3rd Edition. a) Op. Eqn.
L
y
v
x
4
L
L
1
xd
,
x d .8@ y
D
D
5
From McCabe-Thiele plot x w final ~ 0.075
L V
10
b)
F
Wfinal
10 .4
Substitute in for
D tot
D tot
F xF
Wfinal , 4.0
3.1864
1
L
V
xd
x , y Intercept
Wfinal
D tot x D
0.075 10 D tot
.8 D tot
.8 .075
4.483
Wfinal
225
1
L
V
xD
.2 .8
10 D tot
Wfinal x w final
4.0 10 .075
0.4133
5.517
0.075 Wfinal .8 D tot
.16
9.D8. Figure
9.D8. Part C.
Trial & Error to 3 stages ending at x F
y INtercept
0.645
1
L
V
xD
1
0.4 (See figure)
L
V
.8
226
1
L
V
9.D9.
a.
L
.645
V
.8
.19375,
.80625
L
L
L V
.15375
D
V L
1 L V
1 .19375
Initial
Mass balances: F
F xF
D total x D
D total
W or 20
D total
W x Wf or 8 .975 D total
0.24
W
.28 W
Solving simultaneously: D total 3.453 and W 16.547
Can also use Rayleigh equation to obtain same result. (Use of the Rayleigh equation for this
type problem is illustrated in the Solution to Problem 9-D14.)
b. Vapor in equilibrium with x Wf must be within the two phase region. x
Minimum is when y
x . This is x Wf ,min
227
0.21 . See graph.
y
x
9.D10.
L
L
x D , Slope, L V L D
V
V
Plot on McCabe-Thiele graph for series of x D values.
Op. Eq., y
Simpson’s rule, 1
1
xD
xW
dx W
xF
x W ,fin
x
xd
at x W
xW
6
6
or
Wfinal
n
10 e
x D,avg
Wfinal
xF
F
x W ,fin
1.2491
.52, x W
0.52 0.20
0.32
Rayleigh eq.
xF
xd
xW
xW
xF
Wfinal
xD
2.67
10 0.52
D total
228
xW
x F x W ,fin
2
xD
1.2491
F Wfinal
2.8677 0.2
7.132
.36
1
Fe
2.8677 and D total
Wfinal x Wfinal
xf ) / 2
4
5.95 4 3.70
dx W
15
.20, and (x Wfin
1
xD
10 0.28677
Fx F
x Wfin
1 LD
7.132
0.648
xW
x W ,fin
xD
xW
0.70
0.65
0.60
0.50
0.40
0.30
0.55
0.405
0.25
0.094
0.055
0.035
x D-x W
0.15
0.245
0.35
0.406
0.345
0.265
229
1/(x D-x W)
6.666
4.082
2.857
2.463
2.899
3.774
xW
1
x F = 0.52
xD xW
5.95
xF
x Wfin
3.70
= 0.36
2
x W ,fin = 0.20
2.67
S
9D11. New Problem in 3rd edition. Eq. (9-17)
x butanol Inital
W
dx pot
y
x butanol final
Note W water
Equation is in terms of butanol.
1.0
dx but pot
S
Simpson’s rule – need y at x pot
W
y
but
.6
1.0, .8, .6 butanol.
x but
x water
y water
y but
1
1.0
.8
0
.2
0
0.565
1.0
0.435
.6
.4
y but
1.0
2.2999
3.333
0.70
0.30
.4
3.333 4 2.299 1.0
6
0.9019 W 1.804 kmol.
0.90191
S
More accurate if done in 2 steps. Thus add points below:
x but
xw
.9
.7
.1
.3
1
0.8
.8
.6
.2
6
.2
6
yw
.42
0.66
2.299 4 1.7241
1
3.3333 4 2.9412
230
1
.58
.34
y but
1.7241
2.9412
0.33985
2.299
Total Area = .91975. S = 1.8395
y but
0.5799
xF
9.D12.
Wfinal
dx
F exp -
y x
x Wfinal
xF
xF
dx
x Wfinal
y x
x Wfin
dx
y
D tot
0.32
x
6
4
y x
0.48, x Wfinal
x W final
1
1
y x
2
xF
0.16, x avg
x Wfinal
1
0.16
0.36
0.20
0.32
0.545
0.225
4.444
0.48
0.66
0.18
5.555
5.555
Fx F
1.51
(y-x)
y x
5.0
, Wfinal
Wfin x Wfin
3.0 exp
3.0 0.48
D tot
y
(from graph)
y-x
0.7
0.61
0.37
0.3
0.37
0.29
0.4
0.24
0.08
Simpson’s Rule
xF
0.4 0.08
x w ,fin
F exp
Two Liquids.
0.93826
F xF
x D,AVG
b)
3.333 4 2.7027
6
D total
x
L
L x
0.573 and x
L
D total
L x
0.662 k/moles
0.662 0.16
0.571
Wfinal
n
F
xf
x w final
dx
y
x
1
y x
3.333
2.7027
3.448
3.448
0.93826
D total
F Wfinal
3.1305
Wfinal x w ,final
1.51
2.338
9.D.13. New Problem for 3rd Edition. a) Rayleigh equation:
x
xF
0.32
2
y (from eq. data)
2.338 x DAVG
,
Wfinal
y x
x Wfinal x F
x
5.0 4 4.444
F Wfinal
1
6
xF
xF
x Wfinal
4.8695
0.6057
0.975
L
D total
D total x DAVG
231
L
D total
L .573 L .975
D total .6057
D total .6057 .573
L
9.D14. a.
p org
pw
0.3963
0.975 0.573
L
D total .3963
VPC10 x C10 , and assuming water is pure, p W
760 , p org
4.4732
VPW .
VPC10 x C10 VPW 760
Vapor pressure data for C10 was shown in solution to Problem 8.D10. Guess 99.5ºC.
VPW 746.52, VPC10 ~ 70.5 mm Hg
7 + 746.5 = 753.5 < 760
At 100ºC VPC10 ~ 70.5 and VPW 760 .
7.05 + 760 = 767.05 > 760
6.5
By linear interpolation: T 99.5
.5 99.74 ºC
13.55
b. Use Mass balances. Initially 9 moles n-decane, 1 mole non-volatile
a
.1
Final: a mol n-decane where
1 ; thus, a
.111 mol
1 a
.9
Wfinal 1.111 mol (Water free)
D total
F Wfinal
10 1.111 8.889 kmol
Alternate Solution: Raleigh Eq. with
xF
xD
1: Wfinal
F exp x W,final
c.
nW
Wfinal
F exp
D total
F Wfinal
D org
p tot
n .1
dx
1 xW
n .9
F exp
n 1-x W
xF
x W ,final
.111 F 1.111
8.889. Same result as mass balance.
VPorg x org in org
VPorg x org in org
Should really calculate numerically from integral for most accuracy
D
nW
p tot
VPorg x org in org
VPorg x org in org
0
dn org
However, estimate at final conditions with VPndecane ~ 70.25 (from part a)
nW
760
70.25 .1
n org
70.25 .1
This should be a good estimate.
9.D15.
107.185
Column is similar to figure in Solution to 9.D13, but with 1 stage in column.
a) For finding Wfin & D tot don’t actually need to step off stages. Just want to make sure x Wfinal
is obtainable – I checked this at total reflux – It works. Use Mass balances:
F x F D tot x d Wfin x Wfin
Substitute in F
D tot
Wfinal
232
Then,
Wfinal
Solution is Wfinal
F xD
xD
xF
100 0.975 0.48
0.975 0.08
x Wfin
55.307 kmol, D tot
F Wfinal
b) Need to draw operating lines until: initial
44.673
2 stages gives x Feed .
final
2 stages gives x W,final . Then L/V = slope.
Initial – There will be a pinch at point reflux is returned.
y xd
y int ercept 0.975 0.41
L V Initial Slope
0.579
xD 0
0.975 0
Final: A few trials resulted in final result.
y xd
y int ercept 0.975 0.17
L V final Slope
0.826
xd 0
0.975 0
233
9.D16. a. Need L/V so that 3 stages go from x F
error) was used to find this).
L
V
.84 .57
a
.84 0
.3214 and
b. Need L/V so that 3 stages go from x wfinal
trial-and-error was used to find line.
L
V
c.
F
D total
F x feed
.84 .13
b
Wfinal
D total x D
.84 0
10
D total
Wfinal x wfinal
0.84 . This is line a in Figure (trial-and-
.4 to x D
.8452 and
L V
L
D
a
1
0.08 to x D
D
L V
b
1
.4737
a
0.84 (see line b in Figure). Again,
L V
L
a
b
L V
5.4615
b
Wfinal
4 .84 D total
.08 Wfinal
Solving simultaneously, Wfinal = 5.789 kmol and D total
4.211 kmol.
The Rayleigh equation could be used, is not needed, but gives the same result.
x init
9.D17.
Eq. (9-17),
S
W
1.0 . Start 1 kmol and keep 1 kmol. Add water as boil.
x W ,initial
x W ,final
dx tan k
y
Note balance is on original solvent, methanol.
Use equilibrium data from Table 2-7. Generate table of methanol mole fractions:
x
1.0
0.611
0.222
0.11611
0.01
y
1.0
0.830
.588
.450
0.07
1/y
1.0
1.20489
1.6722
2.222
14.9254
Use Simpson’s rule in two steps. Step 1 (x from 1.0 → 0.222)
234
0.778
1.0 4 1.20489 1.6722 0.97143.
6
Step 2 (x from 0.222 → 0.01)
0.216
1.6722 4 2.222 14.9254 0.9005.
6
Total = 1.87194 = S/W with W = 1.
n
rd
9.D.18. New Problem 3 Edition Eq. (9-14)
y D ,final
F
D final
y D ,final
F
D final
yF
dy
y x
dy
exp
y
yF
x
F
D final
y D ,final
dy
y x
exp
yF
Read x values from equilibrium diagram or interpolate from Table 2-1.
y
x
y-x
1
0.1
0.3
0.5
Area
0.008
0.045
0.155
0.092
.255
.345
0.5 0.1
10.87 4 3.92
6
0.5
D final
exp
C total
F Dfinal
y x
10.87
3.92
2.90
2.90
1.963
0.0702 kmol
1.963
0.4298 kmol
Ethanol MB:
x C,avg
F yF
Dfinal y D,final
C total x C,avg
D final y D,final
0.5 0.1
C total
0.0702 0.5
0.4298
9.D19. New problem in 3rd edition.
VPw x w VPoct x oct Ptot , or in mm Hg, 526.123 1.0
9.D20. Was 9.D18 in 2nd edition.
x F,C5 0.35 & x W,final,C5
F yF
0.05 : x C5,AVG
10.964 .6
0.20, x C8,AVG
235
0.00346 mole frac ethanol
532.7
0.80, p 101.3 kPa.
B.P.
yi
1.0 . For average mole fractions, the BP calculation converges to T =
Ki xi
84º with K C5 3.7 and K C8 0.30 from the DePriester charts. The
close enough to estimate α.
K C5
3.7
12.33
C5 C8
K C8 0.30
Eq. (9-13),
n
Wf
1
F
11.33
0.35 0.95
0.5573, Wfin
Wfin F
D total
0.05 0.65
n
F Wfin
Fx F
x D,Avg
Wfin x W ,fin
L
x
1
V
x D & slope
0.5847
0.95
0.5573 1.5
1.5 0.8359
0.8359 kmol
0.6641 kmol
1.5 .35
D total
9.D.21. New Problem for 3rd Edition.
y
0.65
n
0.98 which is
yi
0.8359 0.05
0.7276
0.6641
L D 1.0
L D
L V
1 L D
12
L
x D , but x D varies.
Thus, plot series operating lines of arbitrary
V
1 2. With a total of 21 equilibrium contacts there will be a pinch where the operating line
intersects the equilibrium curve. This intersection is x W for this x D value.
xW
xD
xD
1
xW
xD
.7
.6
.5
.4
.3
.2
.067
.05
.038
.027
.018
.01
Want to integrate from x W,final
Plot
1
xD
xW
x W ,final
xF
Area
.633
.55
.462
.373
.282
.19
0.02 to x F
xw
1.5798
1.818
2.1645
2.6801
3.5461
5.26316
0.06 and want middle point at x W
vs x W and find values.
0.02,
0.06,
1
xD
xW
1
xD
xW
0.06 0.02
6
3.23; x W,Avg
0.04,
1
xD
1.65
3.23 4 2.1
1.65
236
0.08853
xW
2.1
0.04 .
Wfinal
F exp
Area
D total
2.5 exp
F
Wfinal
0.08853
0.2118
2.288
x D,Avg
237
F xF
Wfinal x W ,final
D total
0.492
9.D.22. New Problem for 3rd Edition. t OP
9.D23.
Prelim. Calc. Feed; Avg MW
MWavg
D tot
0.1 MW
0.1 46
1000 kg
20.8 kg mol
L
L D
toperating = __1.49 to 1.50
QR
E
0.9 MW
0.9 18
h
water
20.80 kg/mol
48.0769 kmol
23
2 5 0.4
V 1 L D 53
All op. lines have slope 0.4.
Can draw op. line to x W . Ten stages will go from x D to x W because have large number
of stages. Thus, do not need to step off stages.
238
From Graph can create table of 1/(xd – 1/xw) versus xW.
xD
xW
xd
xw
1
0.665
0.10
0.630
0.08
0.499 0.052 x Avg
0.565
0.550
0.447
xd xw
1.770
1.8182
2.237
0.440
0.278
0.140
0.057
0.400
0.258
0.130
0.053
2.500
3.876
7.692
18.868
0.040
0.020
0.010
0.004
239
Simpson’s Rule: x F
0.1, x W,final
xF
dx W
x Wfin
xd
0.004, x W,Avg
xF
x Wfin
xW
xd
6
WFinal
F
D total
x DAVG
xF
exp
x Wfin
F WFinal
Fx F
1
6
0.096
0.104 2
xW
4
x Wfin
18.868 4 2.237
dx W
xd
xW
0.052
1
xd
1
xW
1.770
0.62289; Wfinal
x AVG
xd
xW
0.4734
48.0769 0.62289
48.0769 29.9466 18.1303 kmole
WFinal x Wfin
4.80769
D total
29.9466 0.004
18.1303
240
xF
0.2586
29.9466
9.D24. Was 9D22 in 2nd edition.
a) F D total Wfin and Fx F =D total x D
Fx F
D total
D total x D
x Wfin +Fx Wfin
0.62 0.45
0.85 0.45
3.0
Wx Wfin
D total
xF
x Wfin
xD
x Wfin
1.275 kmol, Wfin
F
F D total
1.725 kmol
b) Want operating line where 2 equil. contacts gives x w fin 0.45 . y
L
L
xD .
V
V
Surprisingly, with 2 contacts T & E not needed. – Start stepping off stages from top & from
bottom simultaneously. The intersection point must be on op. line as is y x x D .
L
V
Slope
0.85 0.44
0.85 0
0.482,
Figure for 9.D24.
9.D25. New Problem in 3rd edition.
Mix together
F F1 F2
2.5
241
L
L
L V
D
V L
1 L V
x
0.932
1
xF
F1x F1
F2 x F2
xF
w FINAL
n
F
xF
x FIN
6
x w Final
0.8 2.5
dx
xw final
xF
2.5
y
1
y
xF
x AVG
x
0.32
x
y
x w ,FIN
y
1
x
x w ,AVG
Wfinal
3.333 4 2.666
D
area
Fe
F Wfinal
Then from 0.2 to 0.1 with F
1.151,
x
WFIN1
Now F
x
y
WFIN1
1
y x
0.1 0.4
3.3333
0.15 0.51 2.7777
0.2 0.575 2.6666
F2
0.1
6
Wfinal2
0.6166
Fx F
x DAVG
WFIN x w FIN
.2
2.666 4 2.703
6
Ftot x tot
3.030
0.55026
WFINAL1 = F1e-area = 1.5 .5769 = .865
D1
F1
WFinal,1
0.635, x D,AVG ,1
0.865 1.0 1.865,
xF
3.3333 4 2.7777
2.666
Fe
D2
area
F
1.865 0.7518
Wfinal2
Wfin 2 x Wfin
2.5 .32
242
.865 .2
0.635
0.285185
1.4022
1.865 1.4022
1.4022 .1
1.09775
D total
Higher distillate mole fraction.
1.5 .4
0.2
Total D total
Total x D,AVG
0.578
D
D1
F2
y x
0.2 0.575 2.666
0.3 0.67 2.703
0.4 0.73 3.03
x w ,F
1.349 kmol
1
y
x
Values are from methanol-water
equilibrium data.
2.817
2.5 0.5398
First go from 0.4 to 0.2 with F1
Part b)
y
1
y x
0.1 0.4 3.333
0.21 .585 2.666
0.32 .675 2.817
6
0.21
2
4
x
.22
x w FIN
0.46275
.635 .46275 1.09775
0.6010
Part c) Go from 0.4 to 0.1 for F1
1
x
y
0.1 0.4
0.25 0.62
0.4 0.73
0.3
y x
6
3.3333
2.7027
3.030
Wfinal
3.3333 4 2.7027
1.5 exp
.8587
3.030
0.8587
0.6356
F1
For F2 go from 0.2 to 0.1. Same as 2nd part of Part b.
Wfinal
area
F2 e
0.28518
1.0 .75187
0.75187
F2
Wfinal total
1.3874
Wfinal
Wfin ,
F1
D total
F1
F2
Wfinal tot
1.11255
F2
Differs from b – Numerical error!
Ftot .32
x DAVG
1.3874 .1
0.59436
1.11255
Should be same as part b. There are numerical errors in use of Simpson’s rule.
More accurate for .4 to .1 is .4 → .2 (Area = .55026) + .2 →.1 (Area = .285185)
Total Area = 0.835445, Wfinal1 F1 e area
1.5 .433681 0.65052
Then
1.40239 , D total
Wfin total
2.5 1.40239 1.09761
2.5 .32
x D AVG
1.40239 .1
1.09761
0.60109
Same as for Part b.
9.D.26. New Problem for 3rd Edition.
L D
4, L V
final
a&b)
final
L D
45
2 3, L V
1 L D
53
0.4
0.7 . Step off 2 stages.
0.7 draw op. line slope = 0.8. Two stages gives
0.11 (See graph (labeled 9.D.c))
x w final
Also, draw a few lines with x D
2 stages.
b) Generate Table x D , x w , 1 x D
Plot
23
0.8
For Part b, draw op. lines with slope 0.4 for arbitrary x D
For Part a, From x D
L D
1
xD
Find 2 areas
xw
0.7 and L V between 0.4 and 0.8 . Find x w values with
xw
vs x w . Note there is a break in curve at x D
1. from x F
2. from x w
0.6 to x w
0.185
0.185to x w final
Area 1. Simpson’s rule. x w avg
0.6 0.185
2
243
0.110
0.3925 .
0.7 x w
0.185 to 0.110
1
From graph
Area 1
Area 2.
0.6 0.185
6
1
xD
xw
xD
2.37 .
xw
x w avg
3.56 4 2.37
1.942
1.0363
curve is straight line. Thus, Area = width x Avg height
1.6949 1.942
0.185 0.110
2
0.13638
Total area = 1.1726.
Rayleigh eqn.,
c)
n
Wfinal
F
x w final
1.1726
Wfinal
100 e
D total
F Wfinal
x D,AVG
Fx F
dx w
xF
xD
xw
1.1726
3.0955
6.9045
Wfinal x Wfinal
D total
6.0
3.0955 0.11
6.9045
244
0.8197
L/D
2/3
2/3
2/3
2/3
2/3
-4.0
xD
0.9
.85
0.8
0.75
0.7
0.7
0.7
xw
0.65
0.48
0.36
0.253
0.185
0.145
0.110
x w ,final
245
1
xD xw
4.0
2.703
2.273
2.012
1.942
1.8018
1.6949
9.D.25. New Problem for 3rd Edition. From the methanol-water equilibrium data, the following table can
be obtained.
246
xM
1.0
.8
.6
yM
1.0
.92
.825
1 yM
1.0
1.08696
1.21212
x pot ,Initial
S
W
x pot ,final
dx MeOH
y MeOH
.4
Simpson’s rule:
1.0 4 1.08696 1.2121
6
0.4373W 0.8747 kmol
S
0.4373
9.E1.
octanol
water
xF
pot
0.90, F=1.0 kmole
1 0.95 .9
Final octanol in pot
1.0 0.1 0.1
Nonvolatiles in pot
x oct,W,final
steam
log10 VPW
0.045 kmol
0.045 0.145
0.3103
2164.42
8.68105
, T C, VPW mmHg
273.16 T
0.3103, x W, in W 1.0, T 99.782 C from
a) Final conditions x oct, in org
problem 8.D11. Initial conditions: x oct,in org
0.90, x W in W
solution
1.0
x i VPi 1.0 atm 760 mm Hg
From spread sheet find T = 99.377ºC
b)
Wfinal,org
c)
Dorg
F
1 z
1 x Wfin
F Wfinal
0.8550
D org
nW
d) Eq. (9-24)
p tot
Estimate VPoct at average T
p tot
VPoct
VP
VP
0
nW
1.0
oct
1.0 0.9
1 0.3103
n org
oct
x oct
x oct
dn oct
(99.782 99.377) / 2
D org
0
dn oct
x oct
0.1450
D org
dn org
0
247
p tot
VPoct
99.5795 , VPoc tan ol
D org
0
dn oct
x oct
D org
18.87 mm Hg
to
F 1.0, n org
F W, x org
dn org
W
W
1
Step-by-Step integration,
n org
F
1
x org
x org
1 x feed
1
0.1 F W
dn org
dn org
x org
dn oct
Avg x org
x org,avg
0
1.0
.9
>
0.1
.1
.9
.8888
0.2
.1
.8
0.875
0.3
0.4
0.5
0.6
0.7
0.8
0.855
.1
.7
.1
.6
.1
.5
.1
.4
.1
.3
.1
0.055
.2
0.145
0.8944
0.11181
>
0.8819
>
0.8661
>
0.8452
>
0.81666
>
0.775
>
0.7083
>
0.58333
0.50
0.3103 >
0.40517
0.11339
0.8571
0.11546
0.8333
0.1183
0.8000
0.12245
0.750
0.12903
0.6666
0.14118
0.17143
0.1357
1.1588
nW
p tot
VPorg
Porg
O
dn org
x org
D org
760
18.8666
1.15882
0.8550
45.826 kmol
e. Continuous had 108.93 kmoles water/kmole organic fed. The continuous always operates at
lowest octanol mole fraction in liquid & thus y oct is always at lowest value. Thus, requires
more water to carry over octanol then the batch operation.
9.E2. New Problem in 3rd edition. Parts a & b. See solution to problem 8.D25.
mol B 78.11
x benz
mol B 78.11 80 673.2
c. Find T from Eq. 8-15
With Spread Sheet:
SPE, Problem 9E5. Solution for temperature
T deg C
92.04234 Do step by step
Antoine
VP values
VPW A,B,C
8.68105
2164.42
273.16 2.754418
568.0906
VPben A,B,C 6.90565
1211.033
220.79 3.034461
1082.583
X ben
0.17727 xw
1 ptot
760
Eq8
-5E-05 Goal seek B6 to zero changing B2
massbeninit
20 massbenfin
2
248
dmorg-sum
dnw/dnorg 9-23
d)
18 massben-still
2.960203 dnw
2 dmassorg
0.037898
1
Use Spread Sheet for each time
dn W dn org Eq. 9-23
step. Did the addition of steps off-line in table below.
nW
dn W for n org still init 20 78.11 n benz
2 78.11
Step-by-step integration.
still final
Set dm org
1 kg. Values from spreadsheet.
Mass benz still,
777 (kg)
dm org kg
Initial T
0 → 1
1 → 2
2 → 3
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17 → 18
18
final T
d)
20 → 19
19 → 18
18 → 17
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3 → 2
2
dn W divide all
values by 78.11
kmol
.664431
.677266
.691548
.707537
.725558
.746073
.769462
.79657
.828276
.865852
.91108
.966543
1.036129
1.12596
1.246275
1.415548
1.670846
2.098857
2.960203
TºC
from spreadsheet
75.99
76.27
76.577
76.91
77.269
77.66
78.0996
78.58
79.12
79.715
80.39
81.156
82.03398
83.0487
84.2358
85.6435
87.339
89.422
92.04
For accuracy add time steps 1 to 17 + (time steps 0 & 18)/2. This is then identical to the use of
average values of dm for every step.
Steps_1 to 17
0.5 Steps _ 0
17.2794168
18
1.8122565
n W 19.0916733 78.11 18.016 4.4034 kg water
Compared to continuous, nw = 12.3, batch requires less because benzene mole fraction is higher
in batch operation for most of batch. If we take final cut and used that value for entire operation,
18.016
dn W
18 kg benzene overhead 12.3 same as continuous.
78.011
e) To vaporize (n ben ben ) / w varies since T is different.
For accuracy, do for each dm org and find λ values at these T.
x d ,fin
9.E3.
Simpson’s Rule:
xF
dx d
xd
xB
0.13
6
1
xd
249
4
xB
x d .63
xd
1
xB
x d 0.565
xd
xB
x
D
0.50
Generate table from graph
1
xd
xB
xd xB
0.3 0.36 3.0303
0.2 0.597 2.5189
0.1 0.565 2.15
0.04 0.500 2.004
x init
9.E4.
Wfinal
F exp
x W ,fin
0.13
6
3.0303 4 2.15
D final
Fe
1 e
B
F Dfinal
x B,avg
0.2954
2.004
0.2954
7.442 gmole
2.558 mole.
F xF
Dx D,fin
5.0 4.6886
B
2.558
dx
y x
T & E since dilution effects F & x init .
Dilute with 5 kg water → Start with 6, x init
Dilute with 4 kg water → Start 5, x init
Dilute with 3.5 → Start 4.5, x init
16
15
0.1667
0.2
1 4.5
0.2222
Dilute with 2.75 → Start with 3.75, x init
1 3.75
0.26667
Dilute with 1.75 → Start with 2.75, x init
1 2.75
0.364
250
0.1218
For each dilution want to integrate using Simpson’s rule until find Wfinal
need values of 1 y x at x init , x avg , and x final
are determined in the following table.
1.0. Thus,
0.01 for each dilution. These values
Table of Values for Integrations
Dilute
5 kg
Water
4 kg
Water
3.5 kg
Water
1.75 kg
Water
2.75 kg
Water
Integrations:
Dilute 5 kg:
Wfinal
Dilute 4 kg:
Wfin
Dilute 3.5:
Wfin
Dilute 1.75:
Wfin
Dilute 2.75:
Wfin
x
0.16667
0.08833
0.01
0.200
0.105
0.01
0.2222
0.11611
0.01
0.364
0.1870
0.01
y
0.537671
0.38708
0.067
0.579
0.428
0.067
0.598
0.450
0.067
0.706
0.563
0.067
y-x
0.3710
0.29875
0.057
0.379
0.3230
0.057
0.376
0.334
0.057
0.342
0.376
0.057
1/(y – x)
2.695412
3.34724
17.544
2.63
3.095975
17.544
2.6596
2.994
17.544
2.923977
2.6596
17.544
0.2666
0.138
0.01
0.636
0.493
0.067
0.369
0.355
0.057
2.7100
2.8169
17.544
Use Simpson’s rule for each addition.
0.15667
2.695412 4 3.34724 17.544
0.87809
6
6 exp -0.87809 2.4934 . Value is too high. Want 1.0 kg.
0.19
32.5579 1.031
6
5 exp -1.031 1.783 too high
0.2122
32.1796 1.138
6
4.5 exp -1.138 1.442 too high
.354
31.106 1.833
6
2.75 exp -1.835 0.4389 too low
.2566
31.52 1.348
6
3.75 exp -1.348 0.9740
Close to desired 1.0 kg. Thus, 2.75 kg water. The final still pot is 99% water so have (.99)
(.974) = 0.964 moles water remaining. Moles of water distilled off is 2.75 – 0.964 = 1.786.
9.H.1. New Problem in 3rd edition. This problem is challenging for students because they must first
derive the forms of the equations they need to use.
251
A. Define. The system is the simple still pot shown in Figure 9-1. Find Wfinal, D, xA,Wfinal, and xA,dist,avg.
B. Explore. At first it may appear that the problem in Part a is under specified since there are now five
unknowns. However, in specifying the problem based on the fractional recovery of benzene in
the distillate we have added the equation for the definition of fractional recovery of A in the
distillate. This equation is most conveniently written as,
FzA (1 – Frac. Rec. A in distillate) = Wfinal xA,Wfinal
(9-35a)
which becomes, Wfinal = FzA (1 – Frac. Rec. A in distillate)/ xA,Wfinal
(9-35b)
C. Plan. If we write Eq. (9-13) for A and substitute in Eq. (9-35b) we obtain Eq. (9-36),
0
1
AB
1
n
x A ,W ,final 1 x A ,F
1 x A ,F
n
x A ,F 1 x A ,W ,final
1 x A ,W ,final
n
z A 1 Frac. Rec. A.dist
x A ,W ,final
Part a. In a spreadsheet Eq. (9-36) is easily solved for xA,Wfinal using Goal Seek. Then W final can
be determined from Eq. (9-35b). Then DTotal is determined from Eq. (9-11) and xA,dist,avg is
determined from Eq. (9-10) written for component A or from the fractional recovery.
Part b. Now solve Eq. (9-36) for frac. rec. of A in distillate using Goal Seek. For both parts a and b can
use fractional recovery values and DTotal to find xA,dist,avg = FzA(Frac Rec. A in distillate)/ DTotal
D. Do It. Because Eq. (9-36) for xA,Wfinal is nonlinear, it is easiest to solve this problem with a spreadsheet
and use Goal Seek to solve Eq. (9-36). The spreadsheets are shown below.
Part a
F
5
zA
0.37
The 0.37 is in cell D2
alpha AC
10.71
frac rec A in distillate
0.75
xA,Wfin
0.143185
9-36 term 1 -1.25687 term 2
-0.3075
term 3
0.436926
Eq 9-36
-1.7E-05 Use Goal seek
Wfinal from 9-35b
3.230095 D total
1.769905 xAdist,avg 0.78394
Part a. Use Goal Seek for cell B8, setting it equal to zero by varying cell B5 (xA,Wfin).
Part b. Use Goal Seek for cell B8, setting it equal to zero by varying cell C4.
Part b
F
5
alpha AC
10.71
frac rec A in distillate
xA,Wfin
0.05
9-36 term 1
-2.41222
zA
0.37
The 0.37 is in cell D2
-0.41074
term 3
0.930081
term 2
0.658942
Eq 9-36
-0.00023
Use Goal seek
Wfinal from 9-35b
2.586992
D total
2.413008
xAdist,avg 0.713073
Part a. Use Goal Seek for cell B8, setting it equal to zero by varying cell B5.
Part b. Use Goal Seek for cell B8, setting it equal to zero by varying cell C4 (frac rec A in distillate).
252
SPE 3rd Edition Solution Manual Chapter 10
New Problems and new solutions are listed as new immediately after the solution number. These new
problems are: 10A4, 10A5, 10A7, 10A12, 10A17, 10C4, 10C5, 10D13, 10D19, 10D21, 10G110G4.
10.A9.
10.A13.
A good packing will have: good contact between liquid and vapor, high surface area, low
pressure drop, inert, inexpensive, and self-wetting.
Marbles have low surface area, poor contact and relatively high ∆p.
Figure 10-25 shows that if viscosity increases the ordinate increases and ∆p/foot increases.
10.A14. a.Want low F since this gives low ∆p.
b. F decreases as size increases.
c. Ceramics have much thicker walls than metal or plastic. Ceramics are used in corrosive
environments.
10.A16. 1. a. fewer; 2.b. larger; 3. a. lower
10.A.17. Answer is c.
10.B1.
10.B3.
The trick is to have maximum and minimum positions of the valve with a larger area for
vapor flow at the maximum position.
a. Use a cage to prevent excess movement.
b. Use feet.
c. Have a flap that moves up and down.
d. Use a spring to provide force and maximum position.
e. Sliding valve controlled by an external feedback mechanism.
f. Two flaps to make a roof.
Many other ideas can be generated.
Some possible candidates:
Bottle caps
Bent bottle caps
Natural sponge
Synthetic sponge
SOS pads
Scotch brite pads
Steel wool
Cooper cleaning pads
Miscellaneous junk
Broken crockery or glassware
Plastic coated wire
Tin foil - crushed
Cut up tubing (Tygon)
Glass tubing (broken)
String - balls
lines tied together
Crushed beer cans
Cut up - crushed beer cans
lines twisted
lines stretched taught
Coal
Rope
Egg shells
Styrofoam packing material
Old seat cushions
frayed rope
Rope tied into bow ties
Porous rock pieces
253
10.C1.
Nuts/bolts/screws/nails
Metal filings
Wood shavings
Kindling
Left-over redwood
Pumice
Ash from Mt. St. Helens
Ashes from coal stove
Pieces of cement block
Pieces of brick
Staples
Pop-tops
Window screens, rolled up
Chicken or barbed wire
Old watch bands - twisted
Bent wire coat hangers
Christmas Tree Ornaments
Corn cobs
Cookie cutters
Combination of the above
L/V constant since L/D const. Thus L/G const. In F v only
n
changes. From Perfect Gas
G
P
MWv . Thus, F v increases as P . However, curve is almost
v RT
flat in this range and Cs,bflood ~ constant.
Law
G
MWv
u flood
Then
V
Thus,
L
D
10.C2.
Dia
u flood
P
since
P
1 D and D
F
.5
1
G
G
L D
V
Then, F
L
0.2
20 /
Dia
2
.5
C sb flood
F
xD
z
xD
F
1
xB
L
so V
G
.
F
F
P
P
P , and exponent = ½
See derivation in solution to Problem 10.C1.
L
V
D
1 D
L
D
1 F
xD
xD
z
xB
Then from Eq. (10-16)
L
4F
1
D
Dia
Since Dia
10.C3.
F1/ 2 , Dia
1/ 2
3600 p fraction u flood
L D 1
Plot points based on ∆p and xD z
xD xB
1/ 2
1/ 2
L
G
G
L
on Figure 10-25. From ordinate values calculate F
for each point. Use an average value.
254
10.C4. New Problem in 3rd edition. Part of the operating lines become closer to the equilibrium curve.
Thus, for the same separation more stages are needed. Fortunately, this effect is often small.
10.C5. New Problem in 3rd edition. You can show this by proving that the minimum reflux ratio (Figure
10-18A) or the minimum boilup ratio (Figure 10-19A) must increase compared to the base
cases. These ratios increase because cooling the entire feed (Figure 10-18A) or heating the
entire feed (Figure 10-19A) automatically changes the feed line and moves the minimum
reflux (Figure 10-18A) or minimum boilup (Figure 10-19A) operating lines towards the y = x
line. This means larger minimum external reflux ratio or larger minimum boilup ratio.
10.D1.
K C6
y/x
and
K C7
1 y
Solve simultaneously. x
1 x
1 K C7
K C6
K C7
KC6
T
149 C
169
171
KC7
1.0
1.3
1.34
193
K C6 x
Bounds are K C6
Pick T and generate equilibrium curve.
o
, y
.72
.75
-
1.0
x
y
1.0
.483
.424
1.0
.63
0.568
0
0
Average temperature is T = 171ºC = 444.1 K.
y x
.568 .424
1.786
1 y 1 x
.432 .576
Viscosity equation and terms are given in Example 10-1.
1
1
log10 C6 362.79
.935,
T 207.09
log10
n
C7
MIX
436.73
1
1
T
232.53
.5 n .116
1.0 and K C7
.5 n .127
.895,
C6
0.16 .
C7
0.127 .
2.107,
MIX
1.0 .
0.122.
From Eq. (10-6) for
0.217, E o 0.730 . The higher pressure results in higher
temperatures and lower viscosities. This increases the predicted column efficiency by 24%.
10.D2.
T
v
98.4 273.1 371.5 K (almost pure n-heptane at bottom).
1 100.2
pMW
0.684 62.4
0.205 lb/ft 3 , L
RT
1.314 371.5
42.68 lb/ft 3 , 20
Need L V . First, find y at intersection of operating lines.
L
.999 y
Top Operating Line Slope
.8
V
.999 .5
y .999 .8 .499 0.5998
Then,
L
0.5998 0.001
V
0.5 0.001
1.20
255
L
L MWL
L
G
V MWv
V
Fv
1.2 . This is at bottom where MWL ~ MWv .
0.5
L
v
G
L
0.5
.205
1.2
0.08317
42.68
0.2
From Figure 10-16, Csb
u flood
0.32, C sb
42.68 0.205
0.29
0.32
20
0.205
Saturated liquid feed V V
0.2
12.5
0.29
20
0.5
4.19
2500. Use η = .90
1/ 2
4 2500 1.314 371.5
D
12.35 ft
.90 3600 1 .75 4.19
Somewhat larger. Would design at bottom of column. Use a 12 ft. diameter column.
10.D3.
New 12’ dia col. First, redo entrainment calculation.
L
0.5
0.205
0.0832 , L 1.2 V 3000
V
42.68
For Fig. 10-17 need % flood. In problem 12.D2 designed for 75% flood.
D
Use 12 feet:
1.2, F g
1/ 2
const
11.78 , const1/ 2
75% flood
% flood
e
1.2
1/ 2
10.202 /12.0. % flood
0.022 3000
L
A total
12.0
0.9,
A active
v0
t tray
weir
Dia
0.726 ,
0.726 12 ft
weir
90.48 ft 2 , A hole
0.078 in, 3 16 holes, d 0 t tray
v
9.05
h
p ,d ry
Lg
3067.48
4 113.1 ft 2
113.1 1 .2
VMW v
3600
10.20
1 0.9 113.1 11.3 ft 2
Ad
Table 10.2,
2
1/ 2
72.3% . Then Fig. 10-17, ψ = 0.022.
67.48 , L e
1
1 .022
This is reasonable amount.
14 gauge,
11.78 .75
37.51 ft s , C0
0.003 37.51
3067.48
2
0.1 90.48 9.05 ft2
2.4
0.759 (unchanged from Ex. 10-3)
0.205
100.2 7.48
42.68
8.71 ft
60
59.87
1 0.01
42.68
0.759
2
2.086 in
897.8 gpm
256
Abscissa
Lg
897.8
2.5
weir
8.71
Parameter
w
Dia
4.01
2.5
0.726, Fweir Fig.10 20
Eq. (10-26),
h crest
0.092 1.03
With 1″ gap,
A du
8.71 12
h du
Eq. (12-27),
h dc
897.8
2.083 in
8.71
0.726 ft 2
2
897.8
0.56
1.03
2/3
4.248 in
449 0.726
2.086 2 2.083 0 4.248 10.417
h dc,aereated
10.417 0.5
11.3 10.417 3600 42.68
t res
3067.48 100.2 12
0.040 12.5
Weeping, Eq. (10-32), h
Eq. (10-31), LHS
h
h
2.086 0.0625
2 2.083 0
=4.904 This is OK.
0.0625 in
42.68 3 16
p,dry
x
OK, but close to distance between trays.
20.83
2.148
4.083
RHS 0.10392 0.25119 4.083 0.021675 4.083
LHS > RHS
Operation is slightly marginal with high downcomer backup.
1.5
Increase apron gap to 1.5 inches: A du
8.71 ft 1.089 ft 2
12
h du1.5 gap
h dc
0.56
v o,bal
Given Wvalve
2
449 1.089
p,valve
C v Wvalve 2g
K vA v
0.08 lb,
Av
Cv
1
12
1.888 in
16.11 inch, OK
1/ 2
(10-36)
v
g
32.3 ft s 2 , K v,closed
Pressure drop in terms of inches of liquid of density
h
0.7682, OK
2.086 2 2.083 1.888 8.05 in
h dc,areated
10.D4.
897.8
2
Wvalve
Kv
v
Av
2g
L
L
0.02182 ft 2 ,
33C v
L
1.25,
K v,open
5.5
:
v 02
v
0.1917 lb ft 3 ,
L
41.12 lb ft 3
257
1/ 2
1.25 .08 2 32.2
v o,bal,closed
6.83 ft sec
33 0.2182 .1917
1/ 2
1.25 .08 2 32.2
v o,bal,open
16.73 ft sec
5.5 0.218 .1917
At balance point, h
1.25 0.8 lb
C v Wvalve
p,valve
AL
0.2182 ft 3 41.14 lb ft
L
0.1115 ft
closed:
h
33 .1917
p,valve
2.39 10
open:
h
3
v 02 ft
5.5 .1917
p,valve
4
10.D6.
6.83
2.87 10
v 02 for v 0
2 32.2 41.12
3.98 10
10.D5.
1.338 in liquid
v 02 for v 0
2 32.2 41.12
3
v 02 ft
2
v 02 inches
16.73
4.78 10
3
v 02 inches
Do calculation at total reflux. From a McCabe-Thiele diagram (not shown). Total #
Contacts = 4.2 N = Total – 1 (P.R.) = 3.2
Length
1
HETP
0.31 m
N
3.2
From Fenske eq. and definition of HETP
z
HETP
n
x
x
1 x
n
n
x
1 x
1 x
dist
AB
x
dist
1 x
bot
n
bot
.987
.013
.008
.992
9.150
z = 3.5 meters. Obtain:
a. α = 2.315,
HETP = 0.321
b. α = 2.61,
HETP = 0.367
c.
AVG
2.315 2.61
1/ 2
2.4581 and HETPAVG
0.344
Can also use McCabe-Thiele diagrams although the solution shown is easier.
10.D7. Current:
F v 0.090, 12 spacing, Ordinate 0.2 U nf const., const. 0.2 U nf 0.2 6.0
New:
L Vnew 1.11 L V old , then L G new 1.11 L G old , F v,new 1.11F v,old 0.0999
Trays Spacing 24″, Ordinate ~ 0.32, Ordinate = U nf × Const.
258
U Nf
10.D8.
At
Ordinate
0.32
Const
0.2 6
Fv
0.5, Csb,f 1
0.12
0.2
Uf1
C sb
L
Since
L
0.12
G
pV
0.2
6.0
G
20
9.6 ft s
nRT,
G
Fv
0.5
V
10.D9.
L
20
RT
G ,new
0.5
G ,old
1
0.5
0.25; C sb ~ 0.18
4
U f 1,new
C sb,new
G ,old
C sb,new
old
0.18
U f 1,old
C sb,old
G ,new
C sb,old
new
0.12
U fl,new
G
0.12
MWv p
n
0.5
New Condition:
4
3
2
2
3
3 6 18 ft/s
Mass Balance:
D
F
D
z xB
0.6 0.01
0.59656
x D x B 0.999 0.01
596.56 kmol/h, B 403.44
L V
0.6, V L D V D 0.6V
D
596.56
V
1491.47 kmol h
0.4
0.4
L V D 491.41 kmol h
At top:
At top of col.
V
WL WV
1491.41
kmol
L V since pure MeOH, same mol. wt.
0.6
32.04 kg MeOH
lbm
2.046 lbm
h
kmol
kg
Assume ideal gas. Top of column is essentially pure MeOH.
lb
1 atm 32.04
n MWM
p
lbmol
MWM
v
3
V
RT
ft atm
0.7302
607.79 R
lbmol R
where pure MeOH boils at 64.5 C
L
At top
1
0.2
20
MWv
G
6.0
G
MeOH
h
0.07219
lbm
ft 3
1.8 R
607.79 R
K
1 kg 2.2046 lbm 28317 cm 3
0.7914 g cm 3
1000g
kg
ft 3
24 0.0773 64.5
337.66K
105, 346
49.405
lbm
ft 3
19.0
259
1/ 2
WL
Fv
G
WG
0.07219
.6
L
0.28
0.2
U flood
C sb
20
0.2
19
V
frac u flood 3600
ft
3600 s h
s
Use either 10 ft (slightly higher frac flood) or 11 ft – (lower frac. flood).
0.90 0.07219 lbm ft 3
D = 10.27ft
3.0, y=
Ref. Bonilla (1993).
L Dact
.9 0.66667
.9 .4
2 L D min
x
1+
-1 x
1.75 ,
L V
0.875D , L avg
Generalize Llow
min
L D
act
7.25
0.4
x, y feed
L
L V
0.46667
V L
1.75
1 L V
1 .46667
1 L D
L V
min
1.75D , Llow
Lavg M where L D
n MWv V
0.875
0.636
2.75
actual
or Llow D
p MWv
L D
min
0.875
0.5 Lavg
M
10.D11. a. Since Liquid & Vapor have the same mole fractions L G
G
23
0.3273
At Minimum (Pinch Point), Llow V
L low
0.75
, at z
0.46667 , L D
1 L V xD
pV = nRT,
7.25 ft s
4 105, 346 lbm h
D
min
0.07219
4V lbm h
V
L V
49.405 0.07219
0.28
20
V
Use Eq. 10-14 (Modified), D
10.D10.
0.02294
49.405
Fig 10-16 with 18″ tray spacing: Csb
L
1/ 2
RT , R
L D
min
L V
45.6 cm3 atm gmoles-1 o R 1
260
MWv
.8 46
1 ATM
G
V
L D
L V
.2 18
40.4
3D
6750 lb day , L
4500 6750 .6667
1/ 2
L G
G
45.6 cm3 atm mol 1 R 1
40.4 g mol
.6667 1.393 10
L
F = 97
Ordinate
This is,
2
F
G
L
1
.82
97
3
1.393 10
3
.82
1/2
.001393 g cm 3
4500 lb day
=0.0275
1 g cm3
L
(Table 10-3)
.2
G F2 F
G
2 2250
460 R
L G
H2O
GF
2D
176
.82 g cm3
1 .82
.197 , from Figure 10-25 (flooding line).
gc
.52
0.2
1 g cm 3
62.4 lb ft 3
g cm 3 .82 g cm 3
0.5216 lb (s ft 2 ) 8.64 10 4 s day
2
.197
32.2
45067 lb (day ft 2 ) , G
.75 GF
FIND AREA AND DIAMETER FOR 75% OF FLOODING
AREA
V
.75 G
45067 lb Day ft 2 .75
6750 lb Day
.19970 ft 2
D 2 4 .19970 ft 2 , D .5042 ft 6.05 in
COLUMN DIAMETER
6.05 5 8 9.68 which is probably OK.
PACKING DIAMETER
b. From Fig. 10-25, G 2 F
G
2
97
0.2
1
.82
1.393 10
G
c.
(
G
.52
3
L
0.2
1 62.4
D 2 4 .3503,
L G will be the same; thus
D
2
67500
4 1.998
D
.6679 ft
0.3503 ft 2
8.01 inches
1/ 2
L
G
G
L
V .75 6 ,
.0275
1.927 10 4 lb (day ft )
19267 lb (day ft 2 )
AREA
L
0.036
0.2230 lb (s ft 2 ) 8.64 104 s day
6750 lb day
area
G
2
.82 32.2
AREA
Area
1/2
g c ) .036 at L G
V
will be the same, and G will be the same.
3D as before
.75 .521 8.64 10 4
67,500 lb day
1.998 ft 2 10
earlier value
1/ 2
1.59 ft
19.14 inches
261
10.D12. a.
y
L V x 1 L V x D . When x 0, y 1 L V x D 0.1828 . See figure. Need
2 equilibrium stages. Stop where feed line and operating line intersect.
HETP 5 / 2 2.5 ft, x B ~ 0.065
b. M is at x in
y1
.43
L
L M
6.13
L
L M
1.58
L
L
Within accuracy of graph,
3.88
L
L
V L
L
L L
If try a shorter column with same feed won’t work.
L
L
.8 and must adjust column.
L
V
1
0.8
10.D.13. New Problem in 3rd edition. Saturated vapor feed in problem 10.D.9 has minimum L/V =
(0.999-0.6)/(0.999-0.22)=0.5122. This is (L/D)min = 1.05. The actual L/V = 0.6, which is an
L/D = 1.5. Thus, the multiplier M of the minimum was M = (L/D)/(L/D)min = 1.5/1.05 =
1.43.
For a saturated liquid feed (L/V)min = (0.999-0.825)/(0.999-0.6) = 0.4361, which corresponds to
(L/D)min = 0.7733. If we use the same multiplier, L/D =1.43(0.7733) =1.106 and L/V =
0.525.
z xB
D
0.6 0.01
Mass Balance:
0.59656
F x D x B 0.999 0.01
D 596.56 kmol/h, B 403.44 . These are same as in 10.D9.
At top:
L V
0.525, V
L D
V 0.525V
D
262
V
L
D
596.56
1255.9 kmol h
0.475
0.475
V D 659.4 kmol h
WL WV
At top of col.
V
1255.9
L V since pure MeOH, same mol. wt.
kmol
32.04 kg MeOH
2.046 lbm
h
kmol
kg
The density and surface tension calculations are the same as in 10.D9.
Assume ideal gas. Top of column is essentially pure MeOH.
lb
1 atm 32.04
n MWM
p
lbmol
MWM
v
3
V
RT
ft atm
0.7302
607.79 R
lbmol R
where pure MeOH boils at 64.5 C
L
MeOH
337.66K
Fv
G
WG
L
0.2
U flood
C sb
0.07219
.525
Fig 10-16 with 18″ tray spacing: Csb
L
20
V
49.405
0.07219
lbm
ft 3
49.405
lbm
ft 3
1/ 2
0.02007
0.28
19
0.2
0.28
20
V
h
19.0
1/ 2
WL
lbm
1.8 R
607.79 R
K
1 kg 2.2046 lbm 28317 cm 3
0.7914 g cm 3
1000g
kg
ft 3
24 0.0773 64.5
At top
82, 330
0.525
49.405 0.07219
0.07219
7.25 ft s
4V lbm h
Use Eq. 10-14 (Modified), D
V
frac u flood 3600
4 82, 330 lbm h
D
9.08ft
ft
0.90 0.07219 lbm ft 0.75 7.25
3600 s h
s
Probably use 9 ft, which is a slightly higher fraction of flooding. This compares with 10.27 ft for the
saturated vapor feed. The smaller diameter column will be less expensive.
With a saturated liquid feed and CMO, the vapor flow rate in the bottom of the column is the same as in
the top, V = 1255.9 kmol/hr. For problem 10.D9 with a saturated vapor feed,
V V F 1491.47 1000 491.47 . Since QR
V,
3
QR ,liquid _ feed
(1255.9 / 491.7)Q R, vapor_
feed
2.55Q R, vapor_
.
feed
Thus, in this case there is a significant energy price for reducing the column diameter by this method.
10.D14. D
z xB
xD
xB
F
0.4 0.0001
0.998 0.0001
1000
400.7415 , B 1000 D
599.258 kmol/day
263
or
V
V
V
1202.225
At bottom, L
L D 1 D
3 400.7415
kmol 1 day
1h
1202.225 kmol day
0.013915 kmol s
day 24 h 3600 s
V B 1202.225 599.258 1801.483 kmol day
L
1801.483
1.49846
V 1202.225
Bottom of column is essentially pure water. Also y boilup
Thus
L G
V in
L
G is lb (s ft 2 )
L V 1.49846
lb
kmol 18.016 kg 2.20462 lb
0.013915
s
density water at 100 C
s
kmol
m
3
nRT
where 100ºC
n
G
V
Fv
K
G
G
L
lbm
ft 3
18.016
lbm
ft 3
0.0367
3
ft atm
lbmol R
0.7302
671.688 R
671.688 R
1/ 2
L
59.83
3
1.0
L
MWw
RT
1.8 R
373.16K
35.31454 ft
1 atm
p
MWw
m3
kg
W
0.55268 lb s
1 kg
kg 2.20462 lb
958.365
Data from Perry’s, 7th ed., p. 2-92.
pV
xB
1/ 2
0.0367
1.49846
0.03713
59.83
From Fig. 10.25, Ordinate at flooding = 0.18
0.18
G flood
F
w
Area
F = 33,
32.2, F
110 Table 10 3
1/ 2
0.15147
0.2
1/ 2
0.3892
lbm
s ft 2
0.26 cp from Perry’s p. 2-323.
0.80 G flood
0.80 0.3892
V in lb s
G actual lb s ft
Diameter
b.
, gc
110 1.0 0.26
100
G actual
1/ 2
gc
0.18 0.0367 59.83 32.2
G flood
Where
G L
0.2
0.55268
2
4 area
0.8 0.3892
1/ 2
Diameter Intalox
plastic
4
Dia
0.31136
1.77505 ft 2
1.77505
Fint
Berl
FBerl
1/ 2
1.503 ft
1/ 4
1.503
33
110
1/ 4
1.112 ft
264
lbm
ft 3
Fv
10.D15.
WL
v
Wv
L
0.03713 from prob. 10.D14
From Fig. 10-16 with 12″ tray spacing , Csb,flood
0.21
0.2
K
Csb
where σ = surface tension water at 100ºC.
20
Perry’s, 7th ed., p. 2-306 @ 373.15 K,
K
u flood
K
L
4V
0.0367
Dia
lb
s
10 5 dynes
1m
1N
100 cm
0.21 1.2411
59.83 0.0367
0.206
v
v
0.2
0.21 58.9 20
v
Dia
0.0589 N m
58.9
dynes
cm
0.2606
10.52 ft s , u act
.8 10.52
8.416 ft s
Eq. (10-14) modified for units. V is from Problem 10.D14.
lb
ft
u act
3
ft
s
4 0.55268
0.85 0.0367 8.416
1.637 ft . This can be compared to 1.5 ft for packed.
Tray columns with this small a diameter are seldom used in industry.
10.D16.
F1/4 . F1
From Eq. (10-44). Diameter
Diameter (3 )
98 and F3
Diameter (1 )
22 Table 10-3
1/ 4
F3
14.54
F1
22
1/ 4
10.0 ft
98
Can also repeat entire calculation which is a lot more work.
10.D17.
At the bottom of the column have essentially pure n-heptane. Then, following Example 10-4,
we have.
p MW
1 100.2
0.205 lb ft 3
v
RT
1.314 371.4
Need L V . Since L V
operating lines. Then L V
.8
1 y
where z
1 z
0.6 0
1.2 .
.5 0
L
L MWL
G
V MWv
1/ 2
L
v
G
L
1.2
.5, we have y
1.2 1.0
0.6 at intersection of
1.2
0.205
1.684 62.4
1/ 2
0.084
Figure 10-25, Ordinate = 0.05 at ∆p = 0.5
265
0.05 .205 0.684 62.4 32.2
G
The value 0.9595 is
V
V
.2
98 .9595 .684 0.205
at 98.4ºC, and
Water
Water
0.375
. Since feed is a saturated liquid
L
0.6944 lbmol/s.
0.6944 100.2
VMWv
Area
G
0.375
185.5 ft 2
1/ 2
D 4 Area
15.37 ft
This is somewhat larger than in Example 10-4. Therefore design at bottom.
G
G flood
10.D18.
L
gc
ordinate
F
0.2
Assume changing p changes only
G
& ordinate. Then take ratios
G flood ,new
G ,new
G flood ,old
G ,old
G ,new
G ,old
ordinate, new
ordinate, old
p MW
RT
p MW
RT
new
p new
old
p old
4 . Assumes small change in
T (in Kelvin). T set by boiling conditions (Vapor Press) not by ideal gas law.
Fv
0.5
L
G
G
L
,
0.5
F v ,new
G ,new
p new
F v ,old
L ,old
p old
0.5
2.0 , F v,new
2F v,old
0.4 .
New Ordinate Value ~ 0.5, old value ~ 0.09
G flood ,new
p new
ordinate, new
p old
ordinate, old
G flood ,old
4
0.05
0.09
0.5
0.75
10.D.19. New Problem in 3rd edition. Saturated vapor feed in problem 10.D.9 has minimum L/V =
(0.999-0.6)/(0.999-0.22)=0.5122.
This is (L/D)min = 1.05. The actual L/V = 0.6, which is an L/D = 1.5. Thus, the multiplier M of the
minimum was M = (L/D)/(L/D)min = 1.5/1.05 = 1.43. For a saturated liquid feed (L/V) min = (0.9990.825)/(0.999-0.6) = 0.4361, which corresponds to (L/D)min = 0.7733. If we use the same multiplier as in
10.D9, L/D =1.43(0.7733) =1.106 and L/V = 0.525. This is the slope we use in the top section for the 2enthalpy feed. In the middle section of the column at minimum reflux conditions the slope of the middle
operating line is L / V (0.825 0.6) / (0.6 0.22) 0.592 .
The external mass balances still gives D
Lmin
( L / D) min D
0.7733(596.56)
the saturated liquid feed V
V and L
596.56 kgmoles/hr, B
461.3 and Vmin
L
Lmin
D
403.44 . At minimum reflux
461.3 596.56 1057.86 . At
Fliquid . Thus,
[( L Fliquid ) / V ]min ( L / V ) min 0.592 and Fliquid ,min 0.592V L 165.06 .
Since the total feed rate is 1000, the fraction liquefied is 0.16506. The same fraction can be liquefied at
the finite reflux ratios. Thus, Fliq 165.06 and Fvap 834.94 .
266
At top use saturated liquid reflux ratio L V
0.525, V L D V 0.525V D
D
596.56
V
1255.9 kmol h
0.475
0.475
This is the same as for problem 10.D13 and the remainder of the calculation of the diameter is identical to
that calculation. The result of the calculation at the top of the column is
4 82, 330 lbm h
D
9.08ft
ft
0.90 0.07219 lbm ft 0.75 7.25
3600 s h
s
We now need to calculate the vapor flow rate in the bottom. Assuming CMO, in the middle section
V V 1255.9 . In the bottom section,
3
V
V
Fvap
1255.9 834.94
420.96 .
Since QR
V , QR ,2 enthalpy _ feed (420.96 / 491.7)Q R, vapor_ feed 0.86Q R, vapor_ feed.
Thus, in this case the two-enthalpy feed design results in the same reduction in diameter as liquefying the
entire feed, and it has energy savings compared to the vapor feed. However, the two enthalpy feed
system will require more stages than the other systems. A complete economic analysis is required to
determine the most economical system.
10.D20.
Use Fig. 10-16 to find C sb . Gas is N 2 . Liquid is ammonia.
Since system very dilute, treat as pure ammonia liquid & pure N 2 gas.
L
WL kg h
L kmol h
G
WG kg h
V kmol h MWV
0.61
L
g
3
cm 1000 g
m
27.36
0.08206
16.642
236
17.03
28.08
16.642
3
610 kg m 3
3
175 atm 28.02 g mol
RT
Fv
100 cm
1 kg
pMW v
G
MWL
L atm
mol K
1000L
m
253.2 K
3
kg
1000 g
236.0
kg
m3
1/ 2
10.35
610
Off chart. Extrapolate using Eq. (10-10e).
log10 Csb
0.94506 0.70234 log10 10.35
log10 Csb
1.891
Assume
20
u flood
D
0.2
v
2
0.01286
1.0. Then
0.01286
610 236
236
4 V MW V
v
0.85,
Csb
0.22618 log10 10.35
u op 3600
236.0 kg m3 , u op
0.0162 ft s , u op
,V
0.75 uflood
100 kmol h , MWv
0.01215
28.02 kg kmol
0.01215 ft s , Need to watch units
267
4 100 28.02
D
=1.155 m
0.85 236.0 0.01215 3600 1 3.2808 ft
3.79 ft
Probably use 4 ft diameter column – (standard size)
Using larger diameter helps take into account the uncertainty in extrapolating to find C sb .
10.D.21. New Problem in 3rd edition. The mass balance and flow rate calculations are the same as for
problem 10.D14.
D
z xB
xD
xB
0.4 0.0001
F
V
or
400.7415 , B 1000 D
1000
0.998 0.0001
L D 1 D
V
1202.225
3 400.7415
kmol 1 day
599.258 kmol/day
1202.225 kmol day
1h
0.013915 kmol s
day 24 h 3600 s
L/V = 2/3. Top of column is close to pure methanol
Thus L G L V 0.66667
G is lb (s ft 2 )
V in
Pure MeOH boils at 64.5 C
L
MeOH
lb
kmol 32.04 kg 2.20462 lb
0.013915
s
s
1.8 R
337.66K
K
0.7914 g cm 3
kmol
1 kg
0.98290 lb s
607.79 R
1 kg 2.2046 lbm 28317 cm 3
1000g
kg
ft
49.405
3
lbm
ft 3
59.83 / 49.405 1.211
Assume ideal gas. Top of column is essentially pure MeOH.
W
L
n MWM
v
V
1 atm
p
RT
Fv
MWM
G
WG
L
lb
lbmol
0.07219
3
ft atm
0.7302
lbmol R
1/ 2
WL
32.04
.66667
0.07219
607.79 R
lbm
ft 3
1/ 2
0.02548
49.405
From Fig. 10-25, Ordinate at flooding = 0.20
G flood
G flood
Where
methanol
G actual
0.20
G L
0.2
F
gc
1/ 2
, gc
32.2, F
0.20 0.07219 49.405 32.2
110 1.211 0.34
64.5 C
110 Table 10 3
1/ 2
0.2146
0.2
1/ 2
0.4633
lbm
s ft 2
0.34 cp from Perry’s (8th ed.) p. 2-449.
0.80 G flood
0.80 0.4633
0.3706
268
V in lb s
Area
0.98290
G actual lb s ft
2
Diameter
0.3706
1/ 2
4 area
2.6521 ft 2
4
2.6521
1/ 2
1.838 ft
Note that this is larger than the calculation of 10.D14 at the bottom of the column. Thus, do calculations
at top of column.
b.
Diameter Intalox
F = 33,
Dia
plastic
10.E1.
D kmol
op time
Then
V
L
Berl
1.838
FBerl
where D 18.1303 kmol ,
D kmol hr
D
1/ 4
Fint
V 0.4V
L
2
D
3
1/ 4
33
1.360 ft
110
, L V
0.4
D
0.6V and t op
0.6V
Use Fig. 10-25 or Eq. (10-39a) to find flooding at the end of the operation at bottom of column.
kg
MWliq
2
L lbm s ft
L kmol h
kmol
2
kg
G lbm s ft
V kmol h
MWvapor
kmol
At end of operation at bottom of column x 0.004, y 0.036 (pinch)
L
G
MWavg,liq
L
0.004 46
18.128
0.4
0.381
19.023
0.996 18.016
18.128 & MWvap
0.036 46
0.964 18.016
19.023
62.4 lbm ft 3 (Essentially pure water). Boils at ~ 100ºC = 373 K
p MW
G
Then
1.0 atm
v
lbm
lbmol
0.038806
3
RT
FV
19.023
atm ft
1.314
K lbmol
1/ 2
L
G
G
L
0.381
373 K
0.038806
62.4
lbm
ft 3
1/ 2
0.009501
From Eq. 10-39a.
log10 ordinate
log10 ordinate
G
2
From Table 10-3, F
0.6864 & ordinate
0.2059
F
70,
1.6678 1.085 log10 0.009501
G L
0.2
0.29655 log10 F v
2
0.2059 agrees with Fig. 10 25
gc
1.0, g c
32.2,
water
100 C ~ 0.26 c p (Perry’s 5th ed., 3-213)
269
G flood
From Eq. (10-41), V
70 1.0 0.26
s
12
Then
10.F1.
lb
l bmol
s ft 2
2
0.19635 ft 2 and G act
0.7 G flood
0.0038646
19.023
lbmol 3600s 0.453593 kmol
V
0.0038646
6.310665 kmol h
hr
s
h
1.0 lbmol
D
18.1303 kmol
t op
4.7883 h 287.3 min.
0.6V 0.6 6.310665
yM 1 x M
x M 1 yM
0.134 0.98
0.02 0.866
. From Equil. data
0.979 0.05
7.582 , Top
7.582 2.454
0.95 0.021
(Note 40% MeOH is probably wt%)
Estimate: n mix x M n M x W n W
Feed is 60% M 40% W
n mix
0.60 n 0.28 0.40
mix
4.31 0.306
2.454
4.31
Column temperature varies from 64.5º to ~ 98.2 ºC.
64.5+98.2
Avg T=
81.35 C
2
from Perry’s 7th ed., T = 81.35ºC, p. 2-323.
liquids
M
n 0.35
0.28 cp,
1.1837 ,
W
mix
0.35 cp
0.306
1.3195
From O’Connell’s Correlation, Fig. 10-14,
Eq. (10-6): E o
s ft 2
s
kmol
Geometric avg
Then
lbm
lbm
G
4
0.19635 0.53488 0.7
lbmol
Need average
Bot :
MWvapor
0.53488
0.2
Area ft 2
lbmol
Area
V
0.5
0.2059 0.03698 62.4 32.2
0.52782 0.27511 log 10 1.3195
Eo
45%
0.044923 log 10
1.3195
2
49.5%
If conservative use 45%
10.F2.
To use O’Connell’s correlation (Fig. 10-14), need α and viscosity of feed.
KM
yM x M yM 1 x M
. Used Table 2-7 for values.
MW
K W yW x W x M 1 yM
Can estimate a geometric average at bottom, feed & top
0.134 0.98
0.729 0.6
7.582 , MW ,feed x .4
4.035
M W ,bot
0.02 1.866
0.4 0.271
270
0.979 0.05
1/ 3
2.454 ,
4.2184
0.75 0.021
Averages can be calculated many other ways.
The feed is saturated liquid. From Table 2-7, T = 75.3ºC
Viscosities from Perry’s, p. 2-323, W 0.39cp & MeOH 0.30
Note: (MeOH, 40% probably refers to wt % - p. 2-322 Perry’s)
Estimate n mix x1 n 1 x 2 n 2
MW ,top
n
mix
.4
avg
n 0.30
10.F3.
z xB F
F
.6 n 0.39
4.2184 0.351
Overall Plate effic. = 43.7%
Then
bot
Feed
T
1.0465 ,
mix
0.351
1.481
0.30 0.01 100
36.71 B F D 100 36.71 63.29 lb mol h
xD xB
0.8 0.01
At top of column L = D(L/D) = 73.4 and V = L + D = 110.1
L F F3 L
Stripping section
L L qF where q
4 3
F
L 206.7, V L B 143.3
Feed line has slope 4/3 and goes through y x z .3 . Top operating line has slope L/V =
D
0.667 and goes through
y
x
xD
0.8 . Bottom operating line goes through
y x x b 0.01 and the intersection of top operating line and feed line. McCabe-Thiele
solution is shown in Figure. Optimum feed is 8th from top. Need 8 7/8 equilibrium stages
plus partial reboiler.
271
Overall Efficiency. For O’Connell Correlation, need yE 1 x E
1 yE x E
x
0.019, y
x
0.3273, y
x
.7472, y
AVG
and
Feed
Tcol
. Using Table 2-1 we find α and following mole fraction.
0.170 .981
0.170 :
.830 .019
.5826 .6727
.5826 :
.4174 .3273
.7815 .2528
.7815 :
.2185 .7472
1/ 3
AVG
1
2
10.575
2.87
1.210
3.324
3
Can estimate μ from p. 99 Ethyl Alcohol Handbook at z .3 .523 wt.
frac.,
0.55 cp. Thus αμ = 1.83. From O’Connell Correlation E o .42 .
N
8.875 .42
Height 22 18
18
21.1 . Thus, need 22 stages plus partial reboiler
disengagement
48 (bottom sump)
38.5 ft
4V MW V
Diameter Calculation Dia
v
flooding fraction u flood 3600
Use average values of parameters in stripping and enriching sections.
MW v
MW
eth
stripping section: 18.25
yeth
MW
MW
W
y W for both MW V and MW L .
21.5
WL
L MW L
206.75 20
4135 lb h
WV
V MW V
143.46
2869.2 lb h
20
0.96225 g ml 60.07 lb ft 3 Bottom
Bottoms T =100ºC = 672ºR
L
P MW V
V
Fv
WL WV
V
L
Enriching section:
RT
1.0
4135 2869.2
26.4
MW
20
0.7302 672 R
0.04076 60.07
0.04076 lb ft 3
0.0375, Csb
0.28 .
40.4
WL
L MW L
73.42 35
WV
V MW V
110.13 35
2569.7
3854.55 lb h
0.766 g ml 47.92 lb ft 3 Distillate
Distillate T = 82ºC = T = 639.6ºR;
L
V
P MW V
RT
1 35
0.7302 639.6 R
0.05472 lb ft 3
272
Fv
K
Csb
WL WV
20
0.2
V
2569.7 3854.55
L
0.05472 47.92
0.0225, Csb
0.28
, ft/sec. σ, surface tension in dyne/cm. 57th ed. Hdbk of Physics + Chemistry, F-45.
Bottoms, σ ~ 46 dyn/cm, Middle, σ ~ 25 dyn/cm, Top σ ~ 18.6 dyn/cm
u flood
0.20
stripping:
K
0.28 46 20
enriching:
K
0.285 18.6 20
K
L
V
V
0.33075
enriching: u flood
0.2809
Dia.
0.2809 ft s
60.07 0.04076
V
12.693 ft s
0.04076
47.90 0.05472
8.31 ft s
0.05472
4V MW
V
enriching: V MW V
0.20
, ft s
stripping: u flood
stripping: V MW V
0.33075 ft s
0.90
V
0.75 u flood
V
3600
1/ 2
143.46 lbmol h
20
0.04076
lb ft 3
70392.5
110.13 lbmol h
35
0.05472
lb ft 3
70441.37
Diameters: stripping section: Dia = 1.7 ft and enriching section: Dia = 2.1 ft
Probably use 2.5 ft diameter since there is little if any cost penalty.
10.F4.
Numbers from solution of Problem 10.F3 are used.
V lbmol s MWV lb lbmol
Cross Sectional Area
G lb (s ft 2 )
Bottom:
L G
L V
Top:
L G
L V MWL MWV
1” metal Pall rings: F
48,
MWL MWV
0.15,
1.44 ~ 1
1.44
0.667 ~ 1
0.667
0.15
ψ = Density of water/density of liquid At Top: 61 47.92 1.27
At 81ºC ,
w
0.35 cp,
E
y= x d
At top
0.8, n
MWv
y MWE
1/ 2
G
L
2
G F
G
0.078
F
G
L
0.2
gc
x1 n
MIX
.8 n .45
MIX
1 y MWw
0.05472 lb ft 3 ,
G
L G
0.45 cp , n
L
G
L
gc
V 110.13 mol h
2
.2 n .35 , and
0.8 46
MIX
.2 18
0.43
40.4
1/ 2
0.02254
0.078 from Figure 10-25
0.078 0.05472 47.92 32.2
48 1.27 0.43
x2 n
47.92
0.667 0.05472 47.92
0.2
1
0.2
1/ 2
0.358 lbm (s ft 2 )
0.0306 lbmol s
273
D2 4
Area
D
4V MW v
V MW v
, or
G
1/ 2
4 0.0306 40.4
G
1/ 2
0.358
2.096
Probably use 2 or 2.5 foot diameter columns.
The calculation at the bottom of the column gives a smaller diameter.
HETP
N
Height of Packing, or 1.2 ~ 10
12.0 ft
10.G.1. New Problem in 3rd edition. The result from Wankat (2007a) is listed in the following Table:
Results for distillation of vapor feed 5 mole % methanol, 95 mole % water. Distillate is 0.9543 mole
fraction methanol and bottoms is 0.9976 mole fraction water. Tray spacing = 0.4572 m. Base case
conditions are listed in Tables 1 and 2 in Wankat (2007a). When two trays are listed, they have the same
diameters. The decrease in volume and increase in QR are compared to the base case.
FL
NF,V
0(base) 10
NF,L
--
Two-enthalpy feed:
500
11
6
500
12
6
600
12
6
750
13
6
750
16
7
1000 (all liquid) 9
N
20
dia
A Vol tray QR
2.84 6.33 55.0 2 1065
Qc, total
-12,330
decr Vol
--
20
22
20
20
26
20
2.08
2.07
1.89
1.56
1.56
1.20
-12,340
-12,330
-12340
-12,360
-12,330
-13,680
46.5 % 0.5 %
40.9 %
0
55.8 % 0.5 %
69.6 % 2.3 %
60.3 %
0
82.1% 127 %
3.38
3.38
2.80
1.92
1.91
1.13
29.4
32.5
24.3
16.7
21.8
9.8
2
2
2
2
2
2
1070
1065
1070
1090
1065
2415
Intermediate condenser:
FWithdr NF,V NV,with NL,ret N dia
A Vol tray
300
11 10
6
20 2.41 4.56 39.6 2
450
11 10
6
20 2.22 3.88 33.7 10/11
QR
1067
1067
Qc, total
-12,340
-12,340
Two-enthalpy feed (FL = 600 kmol/hr) plus one intermediate condenser:
Fwithdr NF,V NF,L NV,with NL,ret N dia A Vol tray QR,total
Qc
100
12 6
5
5 20 1.69 2.23 19.4 2 1073
-12,340
80
12 6
13
6 20 1.72 2.33 20.2 2 1079
-12,345
incr QR
--
decr Vol incr QR
28.0 % 0.2 %
38.6 % 0.2 %
decr Vol incr QR
64.7 % 0.8 %
63.2 % 1.3 %
Two-enthalpy feed (FL=600 kmol/hr, NF,V =12, NF,L=6, N=20) plus two intermediate condensers:
Fwthd1 NVwth1 NLret1 Fwthd2 NVwth2 NLret2 dia A Vol tray QR,total
Qc
decr Vol incr QR
100 5
4
80 13 8 1.50 1.77 15.4 2/6 1081
-12,350
72.1 % 1.6 %
Two-enthalpy feed (FL = 680 kmol/hr) plus one intermediate condenser:
Fwithdr NF,V NF,L NV,with NL,ret N dia A Vol tray QR,total
Qc
100
12 6
5
5 20 1.51 1.79 15.5 6 1081
-12,350
decr Vol incr QR
71.7 % 1.6 %
With constant Qc and QR, the two-enthalpy feed with FV = 750 and N = 26 appears to be best.
10.G.2. New Problem in 3rd edition.
Results are from Wankat, P. C., "Balancing Diameters of
Distillation Column with Vapor Feeds," Ind. Engr Chem. Research, 46, 8813-8826 (2007).
274
Table 1. Simulation conditions and results for base cases. F
1000 kmol / h, D = distillate flow rate
kmol/h, N = number of trays + condenser + reboiler, tray spacing = 18 inches = 0.4572 m,
operation at 80% of flooding, dia = maximum calculated diameter in m, tray = tray at which max
diameter occurred. A = max calculated column area in m 2 , Vol = column volume in m 3 = A(N
– 2 +1) (tray spacing) where N – 2 is the number of trays and +1 is for disengagement space for
liquid and vapor, Q R and Q c = reboiler and condenser duties in kW, p cond condenser pressure
p pressure drop in psi/tray, N feed = optimum feed stage, and condenser is stage 1.
Note this solution has a p, each stage. Thus, solution slightly different than students’ solutions.
in atm,
N Feed N Dia A Vol tray Q R Q c , L1 D D p cond
Ethanol (10 mole %). Water (90 mole%) Vapor Feed Base Case:
23 26 2.61 5.35 85.6 2 902 -10,700 8.0 125 1.80
p
0.1
Table 2. Diameters calculated for standard distillation base cases listed in Table 1. Vapor flow
rate Vj and liquid flow rate L j are in kmol/hr, diameter is in m, area is m 2 .
Tray
2
23
24
35
Ethanol-water, vapor
Vj
Lj
Dia
1125
997 2.61
1082
949 1.99
74.3
950 0.71
79.4
956 0.71
Area
5.35
3.11
0.396
0.396
Table 3. Simulation conditions and results for a distillation column separating a vapor 10 mole %
ethanol, 90 % water feed (see Table 1 for base conditions). Partial condenser is stage 1. N F,V and N F,L
are optimum feed locations for vapor and liquid portions of the feed, respectively. Decrease in column
volume Vol (equal to change in area when the number of stages is unchanged) and increases in Q R are
compared to the ethanol-water base case (Table 1). For both runs y D,E
N
Dia
A
Vol Tray Q R
N F,V N F,L
FL
0(base)
FL
600
Qc,total
23
--
36
2.61
2.24
35.8
2
902
N
N F,V N F,L
23
17
36
Qc,col Qc,feed condenser
Dia
A
Vol
Tray
1.69
2.24
35.8
2
QR
902
0.7901 and x B,W
0.9986.
Q C,col
-10,700
Q C,tot
-10,700
Decr Vol
58.2%
Incr Q R
0
10.G3. New Problem in 3rd edition. Part a. S Dia = 2.032 m. Distillate mole fractions (vapor) = 0.22222
Eth, 0.77765 Propane, 0.12383 E-03 B, and 0.28503 E-9 pentane. Bottoms mole fractions = 0.14843 E10 Eth, 0.10132 E-03 Propane, 0.81808 Butane and 0.18182 pentane. Other values are in Table for 10.G4.
Part b. Worst backup is 0.232 m on stages 30 and 31. Maximum weir loading is 0.0204 m2/s on plate 31.
Part c. Same mole fractions, same Qc and QR. Max backup 0.1614 m in panel A on stages 29 to 32.
Maximum weir loading is 0.01183 m2/s on plate 31 of panel A which is acceptable.
10.G4. New Problem in 3rd edition.
275
V feed
L feed
Qc kW
QR kW
Max Dia Stage
yD,C4
xB,C3
Kmol/s
Kmol/s
m
max dia
0* 1 pass
.1(NF=16)
-1463
2827
2.032
31
.000124
.000101
0 part d
.1(NF=15)
-1463
2827
2.032
30
.000115
.0000942
0* 2 pass
.1(NF = 16) -1463
2827
2.032
31
.000124
.000101
.01
.09
-1463
2600
1.956
31
.000145
.000119
.02
.08
-1463
2373
1.876
31
.000199
.000163
.03
.07
-1463
2147
1.792
31
.000300
.000246
.04
.06
-1464
1921
1.905
32
.000525
.000429
.05
.05
-1466
1696
1.650
18
.00112
.000915
.06
.04
-1472
1474
1.600
18
.003188
.002609
b. Change
N=41
NF,liq=18
NFvap=21
N
.03
.07
-1463
2146
1.793
34
.0000817 .0000668
* Values from problem 10.G3.
Part c. Tray rating program with Dia = 1.793 m and defaults for tray spacing (0.6096m) & for DC
clearance (0.0373m) obtain 0.2207 m backup on tray 34, which is acceptable. Maximum weir loading is
0.01887 m2/s on tray 34 which is acceptable.
Part d. Shown above, plus maximum backup is 0.2320 on plate 31 (acceptable) and maximum
weir loading is 0.0204 m2/s on plate 31, which is marginal.
276
SPE 3rd Edition Solution Manual Chapter 11
New Problems and new solutions are listed as new immediately after the solution number. These new
problems are: 11.A19-11.A22,11.B6, 11.C3, 11.D5,11.D8, 11.G3-11.G4.
11.A3. As feed temperature increases
L D
MIN
increases, hence L/V increases and Q c increases.
L V increases and Q R decreases. The number of stages probably decreases.
(See Figure 7-3. The abscissa increases as L D
min
and L/D increase. Thus ordinate drops.
Since N MIN is constant, N decreases).
11.A.6. New Problem for 3rd edition.
b. A liquid side-stream between the feed and the distillate.
c. A vapor side-stream between the feed and the bottoms.
11.A.9.
1 point for b.
2 points for c.
If the feed rate is consistently one half the design capacity, the entire economy of scale will be
lost. In addition, distillation columns probably operate at lower than design efficiencies.
11.A11. Column 2 would have to be at a lower pressure than column 1.
11.A.12. New Problem for 3rd edition. The heuristics to not do would include items such as:
1. Remove dangerous, corrosive, and reactive components last.
2. Use distillation only for very difficult separations (α < 1.10). And so forth.
0.33
X,T
11.B4. Use heuristics. Hardest separation is xylene-cumene, x ,c
1.57
0.21
C,T
Toulene is most abundant. Use heuristics to:
Remove toluene early
Do hardest separation last
One-by-one in overhead
If use equil-molal splits:
B
T
X
F
C
Can also derive coupled systems.
277
B
X
F
T
C
11.B5.
Add in Heuristic 9 for sloppy separation.
T
T
B
B
X
F
OR
F
X
C
C
11.C.1. New Problem for 3rd edition. Take the log of both sides of Eq. (11-2).
log (cost A/cost B) = (exponent) log (size A/size B)
log (cost A) – log (cost B) = (exponent) [log (size A) – log (size B)]
exponent = [log (cost A) – log (cost B)]/ [log (size A) – log (size B)]
11.D1.
NOTE: This solution requires the solution to Problem 10-D1. Estimate α at feed composition x = z = 0.5
1 K c7
a&b.
For binary, x c6
, y c6 K c6 x c6 . Use Fig. 2-11.
K c6 K c7
T = 168ºC: K c6 1.29, K c7 0.71, x c6 0.50, y c6
(Guess was aided by solution to Problem 10-D1)
.645 .5
1.817
.355 .5
n
N MIN
L
V
min
0.645
.999 .001
.001 .999
23.13 stages
n 1.817
x D y 99 .645
0.7094
x D z .999 .5
278
L
L V
D
c.
L D
Gilliland: x
d.
L D
2.441
min
4 2.441
MIN
L D 1
0.3703 23.13
N 1
0.37027
1 0.3703
Fig. 11-1.
D2
5.91 m 2 . Column Vol
4
cos t
$700 m 3 ,
7 bar, Eq (11-5), Fp
2.25 1.82 2.3 1.0
Qc
$844, 000
.5
10.71 0.00756 7
2.30
$ 209,800
4196 50 1 1
total
$1,054,000
500, B 500, L V
Vh D gives, Q c
$4196 tray
7 2.743
.5
L
VH v
$131,110
710 5.91 m 2
C P, tray
10.71 0.00756p
69ºC (bp) = 156.2ºF. F 1000, D
Energy Bal:
187.3 m 3
3
pD
C BM.tray
Fig.11-9.
m
187.3 m 3
area H
$700
C P,tower
vol
Tray cos t
Fig. 11-2.
$710 m 2 ,
area
Eq. 11-8.
CBM,tower 131,110
11.D2.
37.3 contacts or 36.3 stages
N act N eq E o 36.3 0.73 49.7 or 50 stages
24” tray spacing × 50 trays = 100 ft
+ 4 disengagement
H = 104 ft = 31.7 m
m
D 9 ft
2.743 m
3.2808 ft
Tray area
700 kPa
0.3117
5
N N MIN
Eq. (7-42b):
N
1 L V
min
0.8, L D
2000 lbmol h, V
V ho
4
2500
Hv
h D is pure boiling hexane, H v is vapor.
Thus, h D
Hv
Qc
2500
13,572 Btu/lbmol
c6
3.39 107 Btu h
13,572
QR
Dh D
Bh B
Fh F
QC
Pick 25ºC as basis.
hD
C PL ,c 6 69 25
hB
1.8 F
C
C PL,c7 98.4 25 1.8
51.7
44 1.8
4094.6
50.8 73.4 1.8
6711.69
Btu
lbmol
Feed is a saturated liquid. From Example 10-1, T = 80ºC
279
hF
CPL,c6 z c6
CPL,c7 z c7
80 25 1.8
hF
51.7 .5
50.8 .5
55 1.8
QR
500 4094.64
500 6711.69
A
3.423 10 7 Btu h
Q
U
1000 5073.75
T
Btu
110 98.4 C
h ft 2 F
where U is average from Table 11-2.
Condenser:
50
U
TAvg
32, 800 ft 2
1.8 F
C
3.39 10 7
Qc
A
3.39 10 7
3.423 107 Btu h
QR
Reboiler:
5073.75 Btu lbmol
2850 ft 2
110 70
2
Note these areas are very approximate. For detailed design need a much better estimate of U.
A
Costs: Condenser
180 156.2
2850 ft
2
1m
2
3.2808 ft
264.8 m 2
2
Fixed Tube Sheet S&T Fig. 11-3, Cost = $125/m2
Reboiler A
32,800 ft
2
1m
2
3.2808 ft
2
3047 m 2
large because of low U.
Extrapolate $70/m2
1 atm, Fp
Condenser
Reboiler
11.D3.
1.0 . Eq. (11-9) CBM
1.0, Fm
C BM
3.29
$125
264.8 m 2
m2
3.29 $70 m 2
C BM
Cp 1.63 1.66 Fm FQ
3.29 C p
$109, 000
$702, 000
304 m 2
$811, 000
Very sensitive to U.
Note: This solution requires the solution to Problem 11-D2.
lb Q R 3.423 10 7
lb
Steam rate,
35, 704.6
h
958.7
h
where Q R is from Solution to problem 11-D2.
Steam Cost
$
35, 704.6
h
Cooling water,
lb
$20.00
h
1000 lb
3.39 10 7
lb
Qc
h
C p w Tw
1.0
40
$714 h.
847, 500
lb
h
where Q R is from Solution to problem 11-D2.
Water Cost
$
h
847, 500
lb
$3.00
1
h
1000 gal
8.3 lb gal
$306 h
280
11.D4.
From Example 11-1 needed 21.09 eq stages + P.R.
h pack 21.09 1.1 ft stage 23.2 ft 7.07 m
D2
Vol
4
2
h pack
4
15 23.2
4099.6 ft
3
4099.6 ft
1m
3
3
3.2808 ft
3
116.1 m 3
Cp ~ $250 m3 packing
Tower 23.2 ft + 2 ft between sections + 2 ft top + 2 ft top = 29.2 ft
1m
h = 29.2 ft
8.9 m , Vessel Vol. 146.1 m 3
3.2808 ft
Fig. 11.1 Cp $700 m3 for tower
From Fig. 11-2
Fp
1.0 1 atm , Tower FM
1 carbon steel , C BM
C p 2.25 1.82
$700 146.1 4.07
$416, 312
Packing, Fm
4.1.
C BM
C p 1.63 1.66 4.1
250 116.1 8.436
244, 855
Total
$661,000
Does not include cost distributors, supports, hold down plates, etc.
11.D.5. New Problem for 3rd edition. n = [log (cost A) – log (cost B)]/[ log (size A) – log (size B)]
Let size A = 10 m2 and size B = 1.0 m2. The cost A = $400/m2 = ($400/m2)(10 m2) = 4000, and
cost B = $2100.
n = [log (4000) – log (2100)]/[log (10) – log (1)] = [3.602 – 3.322]/[1 - 0] = 0.28
11.D6. See residue curves in Figure. The recycle is pure MB. Mixing point is determined in same way
as in Fig. 11-11. Now mixing point splits into light (L) component methanol on B1 . Thus line
LM is extended to 0.0 mole fraction methanol to find location of B1 (0.73333 MB and 0.26667
toluene). We can use mass balance to find point B1 accurately. If D1 is pure methanol, D1 = 50
(all methanol in feed) and B1 = 150. Then from toluene balance 0.2 × 200 = 150 x tol,B1 , which
gives x tol,B1 0.266667 . B1
which is toluene product.
F Re cycle
F2 which is then split into I (Some of which is recycled) and B 2
100 100
M
Since D1 contains no toluene B1 0.26667
B1
F .4
D1
Re cycle 0
.4
100 150 kmo h.
F2 , D1 M B1
0.26667
For Column 2: B 2 essentially pure toluene, B2
0.266667 F2
B1
OK – Satisfies overall external M.B.
D 2 Re cycle F2
D2
B2
50.0 kmol h
0.26667 150
40
150 40 110
10.0, which also satisfies external M.B.
281
11-D7. a.)
Proposed Split: Bottoms – Essentially pure toluene
Distillate ~ .83 methanol. (See figure for Solution to 11.D7)
F 100, z M 0.5, z MB .1, z T .4
Assume all toluene in bottoms & bottoms is pure.
B 100 .4 40, D 60
60 x M,dist
b.)
50 , x M,dist
0.8333 & x MB,dist
0.166667
Proposed Split. Distillate pure M
Bottoms 0.2 MB, 0.8 T (See figure).
D 100 .5 50, B 50
Note – Doubtful this will work.
282
11.D.8. New Problem for 3rd edition. Part a.
Cost in June 2010
$947, 000 556 397
$1,326, 000
Part b.
F
2 x F of Example 11-2.
Since Dia
Tower
F , Dia 2F11
12 ft
2
1m
Diameter
17
Volume
488.2m3
CP,tower
$550 m3
3.2808 ft
2
16.97 or 17 feet.
5.182m, Tray Area
Fig. 11-1, C0p
488.2 m3
21.08m 2 .
Cost vol ~ $550 m3
$268,500
Fig. 11-2.
Tray cos t area ~ $750 m3 extrapolate , Cp,tray
CBM,tower
$750 m 2
21.08m2
268,500 2.25 1.82 1.0 1.0
$15,800 tray
$1, 093, 000
283
CBM,trays
$15,800 36 1.0 1.0
$569, 000
Total bare module cost September 2001 = $1,662,000
In June 2010, Cost
$1, 662, 000 556 397 $2,328, 000
Part c.
Original feed rate 1000 lbmol h .
At
Foriginal , cost lbmol $1326 lbmol
At
11.G1.
2 x Foriginal , cost lbmol
$1164 lbmol
- Use Fig. 11-10b as flowsheet. Use NRTL.
Feed : 1 atm, sat'd Liq, 100 kmol/h, 0.5 MeOH, 0.4 T, 0.1 MB
Fed to Stage 30
Int. Recycle sat’d Liq, 100 kmol/h, 100% MB, fed to Stage 20
Block B1 : N = 46, total condenser, partial reboiler, D = 50, L/D = 3
Dist : 0.999759 MeOH, 0.000241 tol, 1.537 E 0.8 MB
Bot : 8.02 E 0.5 MeOH, 0.266586 tol, 0.73333 MB
Block B2: N = 85, L/D = 9, B = 40, feed = 41
Dist: 0.0001094 MeOH, 0.0008684 Tol, 0.999022 MB
Bot : 2.855 E 35 MeOH, 0.99731 tol, 0.0026888 MB
Thus, this is feasible.
11.G2.
a)
For Fig. 11-10A.
Col 1. N
90, N f
41 ,
L
D
8 D
60
Bottom 0.999186 tol
0.000814 MB
Dist. 0.99938 tol, 0.000605 MB,
Col 2. N
20, N f
10 , L D
2, B
10 Bot .996679 MB, 0.003088 MeOH,
0.000233 toluene
If increase L/D in column 1, Col 1. L D
Col 2. L D
2, N
24, N f
9, N
90, N f
41, Bot. 0.99941 toluene.
12, Dist. 0.99954 MeOH, Bot. 0.9976 MB
Which now meets specifications. Thus Figure 11-10a without recycle is feasible.
b.)
For Fig. 11-10B – converged N = 30, L/D = 6
Dist. Col 1. 88.7% M & 11.3% T – No MB
(azeotrope)
Would not converge higher N.
Does not appear to work; thus, not feasible.
11.G.3. New Problem for 3rd edition. F 100, 10% Ethanol, 5.0 atm, Sat’d liquid feed N = 10 includes partial reboiler, total condenser, D = 10, L D
2
284
P=1
NF = 5
NF = 6
NF = 7
NF = 8
NF = 9
NF = 10
Pcol = 3 atm
Pcol = 5 atm
L D 2
NF = 8
NF = 9
NF = 10
L D 2
NF = 8
NF = 9
NF = 10
QR = 52,948
QR = 53,029
53,148
53,175
52896.9 cal/s
QR = 67995.5
QR = 68022.1
67794
QC = -78614.5
Qc = - 74274
QR = 76435.3
7646 Qc
76264
71692.8
xD,E = .72033
.74564
.76332
.77539
.78037
.69964
.75453
0.76027
.69695
.74276
.74840
.69411
xB,E = .031085
.028263
.026298
.024957
.024363←
.033373
0.027275
0.026637←
.033672
.028582
.027955 ←
0.033988
Size optimal feed columns. Sieve tray 1 uses 18 inch tray spacing at 85% approach flooding, Fair
calculation method for flooding.
Pcol 5 Max diameter tray 2 0.34867m
Pcol
3
Max diameter tray 2 0.38070m
Pcol
1
Max diameter tray 2 0.46429m
Part d. D1. 1.0 atm gives the best separation because the relative volatility is highest.
D2. The lowest Qreboiler is 1.0 atm. The effect of pressure on Qreboiler in this problem occurs
because the feed is always a saturated liquid at 5.0 atm. For the 5 atm column this feed remains a
saturated liquid and the feed line is vertical. At lower column pressures the feed flashes and is a twophase feed in the column. These feed lines have a negative slope. For the feed lines at lower pressures
the slopes of the bottom operating lines are steeper, which means lower boilup ratios, Vreboiler/B. This
means lower Qreboiler at the lower pressures. Another way to think about this is the flashing feed produces
vapor and thus less vapor is required from the reboiler.
D3. The lowest absolute value of Qcondenser is 5 atm. All columns have the same D and L/D.
Thus, V entering the condenser is the same. At higher pressures the latent heat of vaporization λ is lower. Since Qcondenser = Vλ, the result is a lower absolute value of Qcondenser at the higher pressures.
D4. The smallest diameter column is at 5 atm. Vapor density is highest.
Part e. Increasing pressure above 1 atm for the same purity requires more stages, but smaller column
diameter. Thus capital cost initially goes down. Above 8 atm the column must be designed for high
pressure operation, which makes it more expensive. Operating cost may go up if a higher L/D is required
to achieve the desired purity.
11.G.4. New Problem for 3rd edition.
a. (L/D)min = 1.3962 → L/D = 1.5358. Obtain N (Aspen Notation) = 19 with Nfeed = 9 (on stage).
Distillate is 0.75056 ethanol and bottoms is 0.00005987 mole fraction ethanol. Q R = 569,172 cal/s,
285
Qc = - 443187 cal/s, Dia = 1.0755 m, A = 0.90843 m2, H = 11.5824 m, Vol = 10.52 m3
Part b. Note that balancing the flow rates to achieve the desired separation in each column is trial and
error. The easiest was to do this is to first find a flow rate that works for the high pressure column (note
that D changes every time the flow rate is changed). This gives a value for Q C,high pressure = - QR,low pressure.
Then design the low pressure column with this QR. Check that both columns work. The correct flow rate
into the high pressure column is between 570.6 and 577.275. The results are reported below with the
latter value:
High pressure column: F = 577.275 kmol/h, QR = 0.7555(569172) = 430,000 cal/s. N = 20, Nfeed = 9,
distillate is 0.75004 mole fraction ethanol and bottoms is 0.00009733 mole fraction ethanol. Q c = 243,900 cal/s, L/D = 1.5618, T cond = 382.16 K, Dia = 0.79443 m, A = 0.49568, H = 12.192 m, Vol =
6.043 m3.
Low pressure column: F = 422.725 kmol/h, QR = 243,900 cal/s, N = 19, Nfeed = 9, distillate is 0.75087
mole fraction ethanol and bottoms is 0.00003829 mole fraction ethanol. Qc = -190,627 cal/s, L/D =
1.5803, Tcond = 351.56 K, Treb =373.16 K, Dia = 0.7014 m, A = 0.3864, H = 11.5824 m, Vol = 4.475 m3.
Part c. Energy requirement of multieffect distillation system was set at 75.55 % of the single column.
This is not optimized, but was set because it was known to work. Cooling is only in the low pressure
column of the multieffect system, and is significantly less than with only one column. The total volume
of columns is the same; however, this is misleading because volume in the single column would have
been less if it was designed at 3.0 atm. The capital cost will be higher for building two columns than one
larger one, but energy costs are less.
286
SPE 3rd Edition Solution Manual Chapter 12
New Problems and new solutions are listed as new immediately after the solution number. These new
problems are: 12.A5, 12.A6, 12.C2, 12.D1, 12.D3, 12D8, 12D13, 12D19, 12D21, 12D22, 12.G3.
12.A1.
By raising T or dropping p can make gas desorb. The direction of transfer of solute
controls whether a column is a stripper or absorber. If operating line (on Y vs X) is
below equilibrium have a stripper.
12.A5.
New Problem in 3rd edition. c. AspenPlus
12.A6.
New Problem in 3rd edition. A. a. B. d. C. e. D. h. E. i
12.B1.
Calculate: N or y out , or N for A and y out for B, or m, or N for A and m for B, or L/V,
or feed composition, or b, or m and b from 2 experiments, or Overall Efficiency.
12.B2.
Two feeds, Sidestream, Reboiled absorber, Coupled absorber and stripper (see Figure
12-2), Interstage coolers (absorption) or heaters (strippers), Packed columns, Two
different solvents, Two different stripping gases, Add solid adsorbed to solvent (see
Chapt. 14). Cross-flow, Co-current flow, Combinations of flow patterns, etc.
12.B3.
See Isom and Rogers (1994).
12.C4.
Eo
Eq 12 22
N equil N actual
n 1 E mV
Eo
(10-1)
Eq 12 34
mV
L
1
n ( L mV)
n L mV
n 1 E mV
Eo
mV
1
L
n 1 E mV
mV
1
L
(10-4)
n mV L
QED
Ref. Lacks, D.J., Chem. Engr. Educ., 302 (Fall 1998).
y
12.C5.
12.C6.
x
1
1 x
When
x
0,
When
x
1,
Apply Kremser as
x
Graphically,
L V
dx
dy
, b
dx
dy
1
dx
0 or x
yN
MIN
dy
, m
xN
1
, b
1
1 x
2
0
1
1.0
y1
x0
where y N
1
& x N are in equilibrium
287
yN
For absorbers
L
m
mV
min
N
Thus as
Eq. (12-23) becomes
yN
yN
or
mV
1
y1
1
*
1
m
y
p tot
x
0.395
y1
L
x 0 .0001
H
0
min
L
y
3
b 0
x
yN
V
1
xN
min
b
y1
L
x0
V
min
0.395 x
0.0002
unknown
unknown
1
L x0
y1*
mx 0
min
L
x0
1.186
where y1*
mV
y1
1
yN 1 b
m
m
which agrees with graphical analysis.
12.D1. New Problem 3rd Edition.
min
L
,
yN
b for linear.
L
&1
V
mx N
1
Gy N
m x0
1
Gy1
L xN
.395 0.0001 0.0000395
N
xN
L
yN
G
1
0.004 Since x N unknown,
unknown
5
1
y N 1 y1*
y1 y1*
mV
L
n
n
5
1
39.5
L
1
unknown.
Eq. (12-30) or (12-31) easiest to use
n
Eq. 12-30
y*N
0.004 0.0000395
0.0002 0.0000395
L
n
39.5
mV
L
mV
L
39.5
L
n
1
39.5
L
n
24.67
39.5
L
L
39.5
288
T & E → be sure L mV
L
50
75
65
63
62
xN
G
yN
L
1
mV/L
0.79
0.52668
0.60769
0.62698
0.637097
y1
1
L/mV
RHS
1.2658 7.58
1.8987 3.90
1.64557 4.67
1.59494 4.895
1.56962 5.015
100
0.004 0.0002
62
x0
OK
0.0001 0.006229
There are alternative solution paths, but L = 39.5 is not valid, it becomes
n1
0
n1
0
.
Alternative: Trial-and-error McCabe-Thiele solution.
12.D2.
a)
L & V constant. 97% rec. H2S
3% left in gas.
y out
0.03 0.0012 0.000036
Equil.:
y
p H 2S
423x
p tot
2.5
169.2x
M.B. with Const. L & V: 0.0012 V
x out
b) See Figure. y
L
V
0.000036 V
0.0012 0.000036
x
L
V
y in
V
x out L
0.001164
L
10
5.82E 6
2000
x out where y in , x out & y out , x in are on op. line .
c)
Eq
yin
169.2
0.000012
LG
x*
7.09E 6
Note that L G min can
be calculated from a
crude sketch.
min
y
L
G
y out
L
0.0000036
0
200
G act
0
0.0012 0.000036
7.09 E 6
min
M
164.124
L
G
min
M = 1.2186
x
289
d) L/G too high – L too high – Liquid too dilute.
Need much better solvent (e.g., MEA solution).
12.D3. New Problem 3rd Edition. Mass Balance:
Vy IN
Lx IN
y out V Lx , Equil., y
Substitute equil. into M.B.
HVx
HVx
Lx IN
Lx
p tot
p tot
Solve p tot
b.
y out
H
p tot
x out
x
10.96
0.274
100 2 10
0.4 10
6
p tot
x
x
6
10.96 10 0.4 10
HVx
L x IN
L x IN
H
6
0.4 10
16.0 10
6
0.274 atm
6
Can also do graphically, with Kremser equation (trial and error) or by solving mass balance first,
L
y out
x in x out
16 10 6 Then p tot H x out yout 0.274 atm.
V
12.D4.
Mass bal.
yin Vin
Lin x in
y out V Lx out
290
y out
y in
L
V
x in
Op. Eq.,
point yin , x out
line. See graph.
L
V
x out
L
V
x in
y
x out
L
x
12 0.0002 0.00001
y in
0.00228
L
x out
V
V
0.0, 0.00001 and point y out , x in
0.00228, 0.0002 are on op.
Can also use Kremser equation for this problem.
291
12.D5.
Since equilibrium is linear in weight ratio units can do either McCabe-Thiele or
Kremser
solutions.
For
McCabe-Thiele
solution
know
that
points
Yout , Xin and Yin , X out are on operating line. McCabe-Thiele diagram is shown in
Figure. N = 5.9 stages. HETP = 10/.59 = 1.69 ft.
Kremser: Several different forms can be used. We will illustrate with Eq. (12-26)
written in ratio units.
*
YN 1 Yin 0.02, YN+1
mX out 1.5 0.06 0.09
Y1
N
Yout
0.50, Y1*
mX in
n
.02 .09
.5 .6
n
.02 .5
.09 .6
HETP
1.5 .40
0.60
5.88
h N 10 5.88 1.70 feet
12.D6. First, assume Nitrogen is an ideal gas: 1 lbmol = 359 cu ft at 0˚C and 1 atm
333.16
359
437 cu ft/lbmol at 60˚C
273.16
N 2 flow rate
2500 437 5.72 lbmol/h
Water flow rate: Ignore CO 2 in water. MWw
100, 000
18
18
5560 lbmol/h
292
Equilibrium at 60˚C: H = 3410, y = L
H
PTOT
x
3410x
5560
972.0 . External mass balance is:
5.72
L
L
L
y out
x in y in
x out
x in x out
972. 9 10 6
0.00875
V
V
V
Can solve with either McCabe-Thiele diagram or with Kremser Eq. (12-34). The
McCabe-Thiele solution is shown in the figure. Note different scales on axes. Need 5
real stages.
V
Kremser: y N
1
0, y1
0.00875, y1*
n
mx 0
3410 9.2 10
0.03137 , m V L =3.508
0 0.03137
0.00875 0.03137
1 3.508
N
6
n 1
3.508
5.07
.4 3.508 1
Probably use 6 real stages.
G Wt
12.D7.
0.828 wt frac air 1050
G mole
Yin
Inlet
869.4
29
y in
kg gas
h
29.98 kmol air/h
0.172
0.172
1 y in
1 0.172 .828
29
Yin ,molar 0.2077
0.3543
17
NH3
0.172 1050 180.6 kg NH 3
2% remains in gas
869.4 kg air/h
0.2077
kg NH 3
kg air
3.612 kg NH 3
293
3.612 17
Yout mole
Equilibrium data Table 12-2 - y mole
X wt
kgNH 3
kgW
0.05
0.075
0.100
0.15
0.20
0.25
0.30
0.40
0.50
0.60
M.B.
Ymole
0.007087
869.4 29
p NH 3
p, mmHg
p, mmHg
PTOT
1.30 760
988
p
y mole frac
11.2
17.7
25.1
42.7
64
89.5
119
190
275
380
0.01134
0.017915
0.0254
0.04322
0.06478
0.090587
0.12044
0.19231
0.27834
0.3846
X in L
G mol Ymol
17
L wt
17 G mole
X wt
y
Ymole
1 y
0.011466
0.01824
0.02607
0.04517
0.06926
0.09961
0.13694
0.2381
0.3857
0.6250
LX
wt
GYout ,
kg NH 3
17
kmol NH 3
Yout
Note: Units, although mixed, work in Mass Balance & in Operating equation. See graph.
Minimum Solvent
Slope
L wt,min
0.3543 0.007087
0.477 0
= 0.7279=
.7279 17 29.98
Actual Solvent, L wt
Op Line Slope
1.5 L min
L wt ,min
17 G mole
370.99 kg W h
556.48
L wt
556.48
17 G mole
17 29.98
kg W
h
1.092
294
295
12.D8. New Problem 3rd Edition.
X IN
y out
0
0.002
L
Yout
p tot
0.002004
2 atm
760. 2 mmHg
1520 mmHg
L
G
G
L
F2
0.5 .475 air
0.05 mole frac HCl
.05
y
0.05263
.95
mol HCl
mol air
X out
F1 1.0, G=.8
y1IN
0.20 mole frac HCl
YIN
.2
.8
mol HCl
=0.25
mol air
Assume Water (not total liquid) flow rate is constant in both sections. Assume air flow rate (not total gas)
constant is each section. In bottom section G 0.8 mol air h . In top section
G
0.8 0.5 .95
1.275 mol air h. Keep X as kg HCl kg water (from equil. data).
Convert p to y (mole fraction) to Y (mole ratios).
kg HCl
y
X
p
kg water
p
p tot
Y
kg HCl
y
kmol air
1 y
0
0
0
0
0.0870
0.000583
3.8355 E-7
3.8355E-7
0.1905
0.016
0.00001053
0.00001053
0.316
0.43
0.0002829
0.0002830
0.47
11.8
0.007763
0.0078240.
0.563
56.4
0.037105
0.038535
0.667
233
.15329
.18104
0.786
840
.55263
1.2353
296
Y vs X equilibrium data is curved.
Using these units, we need L in kg water hr and G and G in kmol air hr , and we need to
convert the X terms from kg HCl/h to kmol HCl/h.
Top Operating Line
Y
L
G(MWHCl )
(L / MWHCl )X GYout , X IN
GY (L / MWHCl )X IN
L
X Yout
0.002004 Goes through (0, 0.002004)
1.275(MWHCl )
Bottom Operating Line GY (L / MWHCl )X out
L
0
GYin
(L / MWHCl )X
L
L 0.8MWHCl 0.25 L 0.8MWHCl X out
X out
G(MWHCl )
G(MWHCl )
a) Feed line saturated gas at Y 0.05263. Two operating lines intersect at feed line.
Y
X YIN
Y1,IN
0.25
X *out
Sketch for Min L determination
Y
L (G (MWHCl ))
YF2
X int er sec t
L /(G(MWHCl ))
0.002
Yout
*
From plot X OUT
X
0.69 (see figure)
L
(G(MW))
L MIN
L
(G(MWHCl ))
X *OUT
YFIN
0.8(MW)
0.69
(G(MWHCl ))
G(MWHCl ) YF2
YF2
YF2
L
G
G
YF2
.25 0.05263
X *OUT
YOUT
G(MWHCl )
X *OUT
X int er sec t
(G(MWHCl ))
L
Bottom operating line: YF2
YF2
L
Yout
Top operating line:
Solve for X int er sec t
0.05263
YOUT
X int er sec t
L.
YF2
YFIN
Then
YOUT
L MIN
0
YFIN
G(MW)
X
*
OUT
YFIN
YF2
G(MW)
X *OUT
YF2
YOUT
1.275(MW)
L MIN / MWHCl
0.05263 0.00200
0.69
0.22883 0.09355 .3224 kg water h
Since MWmin = 36.461, Lmin = 11.755 kg/h, L = 1.2407 Lmin = 14.584 kg/h. L/(MW)HCl = 0.40
297
298
b. M.B.
F2 YF2
X out
X out
Top
Bottom
GYIN
(L / MWHCl )X IN
F2 YF2
GYIN
GYout
(L(MWHCl ))
0.475 0.05263
GYout
(L / MWHCl )X out
X IN
0.8 0.25
1.275 0.002
14.584 / 36.461
(L / MW)
0.4
G
(L / MW)
1.275
0.4
G
Top goes through
0.8
0
0.5561 kg HCl kg water
0.3137
0.5
X IN
0, Yout
0.002, Slope
(L/MWHCl )
G
Arbitrary point for plotting:
X .4, Y .3137 .4 0.1255
Y .1255 .002 0.1275
Bottom from
X out 0.5561, YIN 0.25
To intersection Top Operating and Feed Line.
Need ~ 1.6 stages. Opt. Feed for F2 is Stage 1 (Feed 1 is at bottom.)
Check Slope bottom
.25 0
.5561 .06
0.3137
0.504 0K.
299
Figure for 12.D8.
300
12.D9.
Repeat 12.D2 with Kremser.
y
y1*
mx
m x0
n
Eq. (12-22)
m
b
169.2, b
0, x 0
mV
0,
169.2
L
0 , y1
x in
0.0012 0
0.000036 0
1 0.846
N
2000
0.846 , L V
200
y out 0.000036, y N
1
200
10
0.0012
0.846
10.69
n 1 0.846
Graphical solution was 10.4. Pretty close!
12.D10.
Use Kremser equation such as
y A out y A*
1 L mV
out
y A in
N
y A*
out
4, m 1.414, L V
L mV
.65, y Ain
L mV
Equation becomes:
1
y Aout
0, y A*
12.D11.
V
L
y out
V
L
m x Ain
out
1.414 .02
.02828
.65 1.414 .459
.02828
Overall mass balance: yin V L x in
x out
N 1
y in
x in
.02828 .552
.01267
y out V L x out
1
.65
.01267
0 .02
4.93 10
4
Any of the vapor forms of Kremser equation can be used but problem is trial and error.
For example, use Eq. (12-21) inverted for L m V 1
L
mV
becomes, .27
N 1
y N 1 y1*
L
1
mV
Set up table and try values of m.
y1
y1*
1
1
1
1.2
m
1.2
m
5
m
1.0
1.2 1.3
1.4
1.41
1.415
RHS .1344 0/0 .233 .2658 .2691 .2706
By linear interpolation m = 1.414. Note that m = 1.2 is a trap for the unsuspecting
student since L/(mV) = 1.0 and special form of Kremser is required.
12.D12.
Note this requires information in Section 13.4.
301
L
X in
.796 1000
.204
796 kg solvent/h ,
.256, X out
.796
0.025
L
G
796
All stages
25,190
0.02564, Y1,in
0.975
0.0316
.0012
1 .0012
.001201
Equilibrium, y = 0.04 x
x
.05
.10
.15
.20
.25
X
0.0526
.11111
.1765
.25
.3333
y
.002
.004
.006
.008
.01
Y
.002004
.00402
0.00604
.00806
.0101
Plot weight ratios.
Op. Line:
Yj
L
Xj
Y0
L
Xj 1
G
G
Slope = - L/G = - 0.0316. Step off stages backwards (start w. stage N) since it is
different than other stages and we wouldn’t be sure when to switch if stepping off forwards. Need 4 equilibrium stages.
Note: Can also plot y vs X, since y ~ Y and G ~ V
302
12.D13. New Problem 3rd Edition. Strip Vinyl chloride from water at 25ºC and 850 mmHg.
H
1243.84x
y
x
1147.904x
p tot
850 760
Want 0.1 ppm water leaving. Entering air is pure, L 1 kmole hr.
y
x0
*
out
x IN
y out
y1
y IN
0
1
y
N
1147.904
1
x out
yN
5.0
xN
x out
y1*
G
b and c. Want
y*out
1147.904 x IN
5739.52 0
x0
5739.52 ppm (mole)
1171.33
5.0 0.1
G 2 G MIN
mix
L G
G MIN
0.00085373
L
F
x *N
n
0
585.665
1147.904
1
y out
Lx IN
For
L 1 kmol h , G
x IN
h
0.00170746 kmol h air
5.0 0
0.1 0
585.665
1147.904
n 1147.904 585.665
d.
kmol
585.665 (See figure for part b – labeled HW5 Prob 1b). m = 1147.904.
c. Eq. 12-28
N
x IN
1 ppm
L
y out
yN
x out
Gy IN
y IN
Lx out
n 25.0
0.672944
4.78327
G
0.00170746 kmol h
585.665 5.0 0.1
0
2869.76 ppm 0.00286976 mole frac.
Probably send waste gas to incinerator. Will require additional fuel to burn.
e. All concentrations are dilute enough that L G and equilibrium are straight and operation is very
close to isothermal.
303
304
12.D14. a)
95% removal CH4, 5% remains – Constant V: Yout
0.05 0.00129
0.0000645
CH 4
b.
yin
CH 4 Eq.
0.00129
L V
y CH 4
min
x*
y CH 4
y out
p CH 4
3600 x CH 4
p TOT
175
y CH 4 in
0.00129
20.5714
20.5714
20.5714 x CH 4
0.00006271
0.000645
CH 4
x CH 4
x in
Slope
0.00129 0.0000645
L V
min
L V actual
c) Ext. bal.
x out
CH 4
x CH 4 ,out
V
L
0.00006271 0
1.4 L V min 27.360; L
y in
x CH 4 ,in
V
L
100
CH 4
V
19.5429
27.360 V
y CH 4 ,out
y CH 4 ,in y CH 4 ,out
0.00129 0.0000645
L
2736
d) Use methane values in Kremser eqn. (12-22) to find N
20.57 100
mV
m 3600 / 175 20.57,
0.75183; y1*
L
2736
0.00129 0
0.0000645 0
n 1 0.75183
N
2736.0
0.00004479
mx 0
b
0
0.75183
6.11 stages
n 1 0.75183
e) Now use Argon values with N = 6.11 to find y Ar,out & x Ar,out .
m Ar
7700
175
Eq. (12-23)
x Ar ,out
44.00,
y Ar ,in
mV
44 100
L
2736
0.00024
y Ar ,1
0.00024 0
V
L
yN
y Ar,out
y Ar,1
y Ar ,in
y Ar ,out
1,Ar
0.00024, x Ar ,in
1.6082,
1 1.6082
1
y1*
mx 0
1 1.6082
1
1.6082
7.11
x Ar ,0
b
Ar
2736
0
7.11
0.60846
0.00024 0.00024 0.60846
100
0.0
0.00024 0.00009397
0.00009397
0.00000534
305
0.00000534 2736
% Argon recovery in liquid
12D15.
100 0.00024
Need equilibrium data. From DePriester chart:
K C3 y C3 x C3 1.23 m C3 , K C4
L
Butane is a design problem:
100
y C4 x C4
N
y N 1 y1*
y1 y1*
mV
L
mV
L
n
m C4
0.17
C4
m C4 x 0,C4
.0006 0
.0000072 0
.83
L
n
mV
Propane is simulation: y N
0.34
mV
5.882,
mV C 4
L
1.2% of the butane leaves as a gas. Thus,
*
y1,C4 0.006 0.012 0.0000072, y1,C4
1
60.85%
.17
2.39
n 5.882
*
0.0017, y1,C3
1,C3
0,
L
1.626,
mV
C3
0
mV
L
0.615
C3
N 1
yN
y1
1
y1*
y
yN
*
1
1
y1
L
1
mV
, y1
1 L mV
yN
1
0.000298
5.7034
12.D16. Was 12.D19 in 2nd edition.
.
a.)
Equil.
y CO 2
H CO2
PTOT
x CO 2 , H CO 2 25 C
1640
50 mmHg 50 760 0.06579 atm
PTOT
1.0
x CO 2
y CO 2
.00035
Feed
H CO 2
1640
Equilibrium in column: y CO 2
H CO 2
PTOT
x CO 2
1640
0.06579
x CO 2
atm
mol frac
2.134 10
7
24982 x CO 2
Basis: L = 1 kmol total/h. Assume L & G constant. Input = 2.1341 × 10-7 kmol CO2/h. 95%
removal = (.95) (2.1341 × 10-7) = 2.027395 × 10-7 kmol CO 2 h in outlet gas.
5% CO2 remains in liquid
x in
x out
.05 2.1341 10
7
outlet liquid mole frac
0.106705 10 7 kmol CO 2 h
0.106705 10
1 kmol h
7
0.106705 10
7
b.)
306
Slope
y max out
24982
y
L
V
Slope
yin
24982 2.1341 10
7
5.3314 10
3
y max
y in
5.3314 10
x in
x out
2.1341 0.10605
max
3
0
10
7
L Vmax
0
x out
x
x in
L
7
2.1341 10
2.62968 10
V
Since L = 1,
max
1
Vmin
2.62968 10
4
3.803 10 5 kmol h
4
c.)
V 1.5 Vmin 1.5 3.803 105 5.704 10 5 kmol h
Conditions for Kremser eq. are satisfied.
CO2 Mass Bal: 2.1341 10 7 in
0.106705 10 5 out w. water 5.704 105 yCO2,out
y1
y CO 2 ,out
Eq. 12-29
2.027395 10
5.704 10
N
n
7
3.5543 10
5
x *N
xN
n
yN
x *N
x0
N
1
0,
y1*
y1
x *0
3.5543 10
m
24982
0.106705 10
2.1341 10
7
7
3
1.4227 10
7
0
1.4227 10
7
5.3569
1.0
n
12D.17.
x *0
L
mV
m
n
3
24982 5.704 10
.0002 1.414
.0002828,
5
L
L
mV 14.14
Can use variety of forms of Kremser equation, but cannot easily use forms with y*N 1 since
y*N
1
mx N and x N is unknown and hard to calculate. Try Eq. (12-21).
yN
y1
1
y1*
.0083 .0002828
*
1
.0005 .0002828
y
L
1
mV
36.91
L
1
mV
N 1
Do by trial-and-error
L/mV
RHS
2
15
3
40
2.9
36.699
2.91
37.02
307
Linearly interpolate L/mV = 2.907. Then, L = (2.907) (14.14) = 41.10 kmol/h.
12.D18. a.
L, x 0
y
p
11.5
p total
1520
0.00757 , x
y1
0
1
x1
0.0004,
L
y1
VT
x
L
yi
V
xN
Bot. of Column:
yN
1
y
1
y x
0.00757
0.0127
0.596
.00596
L
slope
VN
1
100
VT 150
100 , VF
Ext. MB: Lx 0
150 0.0004
xN
VN
K
.01, y
x0
VF
y F 0.003
N
0.0127,
23
50, L 100
VF y F
50 .003
VN 1 y N
1
Lx N
100 .0058
100
VT y1
0.0067
0.0058
L
V
x
yN
L
1
V
xN,
Slope
L
VN
100
1
100
1.0
308
c. Minimum L.
xN
yN
1
Eq.
y
L min
yF
VN
y1
L min
L min
VT
150
L min 100 slope
1
slope
x0
x
Pinch is at y F . x F
y F 0.596
L min VT
L min
0.003 0.596
Slope min
0.51653 VT
0.00503
0.003 0.0004
0.51653 150
0.00503 0
0.51653
77.48 kmol h .
309
12.D19*. New Problem 3rd Edition.
Found m and L/V in Example 12-1.
L/(mV) = (L/V)/m = 133/105.6 = 1.259, (mV)/L = 0.794, y1* = 105.6×0 = 0
If use Eq. (12-22), N = {ln[(1 - .794)((100-0)/(10-0)) + .794]}/ln[1.259] = 4.5
.000024
12.D20. a) 99% removal H 2 O , 1% left,
1000 .01
0.00024 moles out in L
0.00024
x H 2Sout
0.00000024
1000
Moles H 2S out in gas = (.000024) (1000) (.99) = 0.02376
0.02376
y H 2Sout
b)
H H 2S
Equil. H 2S. y H 2S
p tot
V
26800
x H 2S
15.5
H CO2
y CO2
p tot
0.02376
x H 2S
1729.03 x H 2S , m H 2S
728
x CO 2
0.00691
3.44
15.5
x CO 2
1729.03
46.9677 x CO 2 , m CO 2
46.9677
Can use Kremser eq. for H 2S design [dilute linear system]. For example, Eq. (12-28)
n
N
1000
mV
x*N
1729.03 3.44
H 2S
yN
1
n
m
0, x 0
xN
x0
*
N
*
N CO
2
x
x
mV
L
1
mV
L
1
1
x N ,CO 2
x0
1
0.000024, x N
H 2S
CO 2
N 1
yN
1,CO2
, with N
mCO2
H 2S
0.00000024
H 2S
0.16813
2.4807
0, x 0
2.4807 and
5.9479
L
n 5.9479
unknown, x*N
For CO 2 . x N
mV
0.16813,
.000024
.00000024
1 0.16813
N
c)
H 2S
L
mV
mV
L
n
L
x *N
x *N
x0
xN
L
mV
1
0.000038 Kremser (12-31)
46.9677 3.44
mV
L
CO 2
1000
0.16157
CO 2
mV
L
N
mV
L
1
0.000038
1 0.16157
1
.16157
3.4807
0.000031916 CO 2
Little amount of CO 2
310
23.78
12.D21. New Problem 3rd Edition. Abs. y
Stripper
y out
23.78
y
y IN
Abs
y
Slope
5
0.2
x
x
4.756x
118.90x
0.00098
4.756
x EQ
L MIN G
L MIN
x IN
735.302
Abs
100
0.00001
x
L act
m
y IN
y1* mx IN
Eq. (12-22).
N
0.00098, y1
4.756 .00001
y N 1 y1*
y1 y1*
mV
L
n
N abs
459.56 kmol h
735.302 kmol h
V y abs,IN
y abs,out
100 0.00098 0.000079
735.302
Kremser Eq.
1
100 4.5956
4.5956
0.00001
L abs
x abs,out
n
0.000079
0.00020605
1.6 L abs,MIN
L abs x abs,IN
735.302 0.00001
x abs,out
1
0.00098
0.00020605
7.353
x abs,out
External M.B.
yN
0.00098 4.756
Operating line Slope
0.000079
L V
slope equilibrium
x strip,IN
4.756, b
y out
0.00013253
0,
L mV
7.353
4.756
1.5460,
mV
L
0.64681
0.000079
0.00004756
mV
L
n
L
mV
.35319
0.00098 0.00004766
0.000079 .00004756
0.64681
n 1.5460
n 11.1216
2.40889
n 1.5460
0.4357
5.53
311
Stripper
118.90 = Slope Equilibrium
y EQ
y
L
x out
0.015758
= Slope Operating line
VMIN
y IN 0
118.90x N
118.90 0.00013253
0.00001
x IN
x out,abs
0.00013253
x0
118.90
L
0.015758 0
V
VMIN ,Strip
VStrip
y Strip out
128.6037
0.00013253 0.00001
MIN
Strip
735.302
L Strip 128.6037
1.5 5.718
VStrip y Strip IN
5.718 kmol h.
128.6037
8.576 kmol h.
L Strip x Strip IN
x Strip out
0
735.302 0.00013253 0.00001
VStrip
yStrip,IN
yStrip,out
8.576
x *N
0.010506,
0
yN
1
118.9
Kremser (12-28)
n
1
N
x *N
x *N
x0
xN
L
mV
L
mV
n mV L
n
0.00013253 0
0.00001 0
0.27889
N
,
L
735.302
mV
118.90 8.576
0.721106
4.54
n 1.38676
12.D22. New Problem 3rd Edition. K
0.22. y
L 75, V 150, L V
External M.B.:
Lx N
xN
Vy1
V
L
Lx 0
yN
1
Vy N
y1
0.721106
Kx
0.22x. Plot e.g., at x
0.006, y
0.00132
0.5
1
2 0.003 0.0004
0.0052
Points x 0 , y1
0, 0.0004 , and x N , y N 1
0.0052, 0.003 are on op. line.
Plot Op. Line. See graph (labeled 12.D.b). 2 stages more than sufficient.
312
313
12D23.
Apparatus similar to Figure 12-2, except part of treated gas is heated and used as stripping gas.
Absorber: Work in terms of mole ratios.
Yi n .15 .85 0.1765, Yout 0.005 .995
G
1400 .85
Equilibrium: y
0.00502, X in
1190 mol carrier gas/day, L
800 .995
0.005 .995
0.00502
796 mol solvent/day
.5x . Convert to mole ratios
x
0
X
0
.0526
.1111
.1765
.25
.05
.1
.15
.2
Plot ratios on McCabe-Thiele diagram
L
Absorber:
Op. Line: Y
X Yout
G
External balance Absorber: 796 .00502
y
0
.025
.05
.075
.1
L
X in ,
Y
0
.0256
.0526
.0811
.1111
L
0.669
G
G
1190 .1765
1190 00502
796 X out
X out Abs 0.2614
Step off stages as shown in figure. Need 8 equilibrium stages.
Stripper:
Yin
.00502 same as Yout abs , Xin
0.2614 same as Xout abs
X out 0.00502 same as X in abs , L 796 mol solvent day, have 4 stages
Stripper equilibrium: y = 3 x. Convert to mole ratios.
x
0
.025
.05
.075
.1
.15
X
0
.0256
.0526
.0811
.111
.1765
y
0
.075
.15
.225
.3
.45
Y
0
.0811
.1765
.290
.4286
.818
Problem is trial-and-error. Select Yout . Draw operating line from Yout , X in to
Yin , X out .
See if need 4 stages. When need exactly 4 stages, L/G = slope.
From Figure, final result shown: G strip
L slope
796 1.0998
723.7 mol carrier gas/day.
Yout strip ~ 0.287 mol ratio
314
315
12.E1.
Convert ppm(wt) to mole fraction:
ppm 10 6 wt frac
Basis 1000 g. of steam: Feed Liquid 1000 ppm = 0.001 wt frac
mole frac
Liquid Water
lg Nitrobenzene
0.00812 gmole
999 g water =
55.4507
F
L F C where C
28.1 10
L
mV
S Vout
99 61.8
18.0314
37.2g water , C
2.0648 mol
95.7219 2.0648 97.7867 mol h
Outlet: Basis 1000 g
28.1 ppm 28.1 10
S
0.9998535
Total 55.4588 mol
1000g
Avg mol. wt
55.4588
1726 g h
95.7219 mol h
L
V
0.0001465
6
wt. frac.
moles
3
Mol frac.
4
g nitrobenzene 2.2825 10
999.9997 18.016 55.5062
1000 28.1 10 3 g water
55.5064 mol
99 18.016 5.495 mol h .
4.11 10
6
~ 1.0
Equil. y mx b, b 0, m H p tot 28.0
Kremser Eq. – Several forms can be used. → Use Eq. 12-28.
97.7867
mV
yN 1 b
0
0.63555,
1.5734 , x *N
m
28.0 5.495
L
n
1
N
Effic
x0
xN
L
mV
x *N
x *N
L
mV
mV
n
L
N Eq
5.763
5.763
0.524
N act
11
Ref. Hwang et al, IEC Research, 31 (7) 1992, 1753 & 1759.
12-F1.
H = 59.3 (Perry’s 4th ed., p 14-4).
y
H
59.3
x 11.86x
PTOT
5
To be absolutely correct should convert this to mole ratios, although at these low
concentrations could use mole fractions with small error.
y
x
Y
, X
1 y
1 x
316
x in
x
y
X
Y
0
0
0
0
.001 .01186 .001001 .012
.0015 .01779 .001501 .01810
.002 .02372 .002003 .0243
Change specified conditions to mole ratios.
0, X in 0; yin .02, Yin .02041; y out .002; Yout .002003; x out .001, X out
See Figure for plot of operating line, equilibrium and stages. N = 3.3
Height
5
ft
HETP
1.515
N
3.3
equil stage
Yin Yout
L
.02041 .002003
18.4
G
X out X in
.001001 0
If use mole fractions find L/V = 18.0
12.F2.
K E 26.0, K p 0.6, K
After one pass of mass balance obtain:
.001001
0.019
317
xi,1
ethane
0.032
pentane
0.005
octane
0.963
xi,2
xi,3
0.035
0.033
0.031
0.162
0.934
0.805
yi,1
0.975
0.003
0.021
yi,2
yi,3
0.962
0.885
0.019
0.099
0.019
0.016
For new temperature used multi-variant Newtonian convergence.
T1,New 73.90 F, T2,New 80.93 F, T3,New
2.G1.
a) N
4, L
570, y A,out
0.00317
b) N
8, L
500, y A,out
0.00315 while with L
c) N 16, L 490, y A,out
d) Have a pinch point.
0.002978 while with L
490, y A
480, y A
99.15 F.
0.00358
0.00337
12.G2. Used Peng-Robinson.
a. Total number of stages required
8
b. Feed stage location for the solvent
1
c. Feed stage location for stream A
8
d. Feed stage location for stream B
6
e. Outlet mole fractions of gas stream leaving absorber
0.9991009, 0.00024691,
0.00019067, 0.0004617
f. Outlet mole fractions of liquid leaving absorber 0.012878, 0.0310992, 0.0198928,
0.93612992
g. Outlet gas flow rate
161.6478 kmol/h
h. Outlet liquid flow rate
213.352
kmol/h
i. Highest temperature in column
19.1287
˚C and stage it occurs on 8
12.G.3. New Problem 3rd Edition. Used NRTL.
Column pressure = 1.0 atm. Feed gas flow rate = 752 kmol/h. Feed gas temperature = 100oC.
Liquid feed temperature = 75oC. Recovery of isopropyl alcohol = 0.98000.
T1 = 302.5K, T2 = 298.6K, T3 = 299.9K, T4 = 301.9K, T5 = 303.3K.
Leaving gas: G = 802.2 kmol/h, Mole fractions: IPA = 0.02443, W = 0.033836, N2 = 0.93721
Leaving liquid: L = 149.8 kmol/h, Mole fractions: IPA = 0.002671, W = 0.99638, N2 = 0.000950
Column diameter = 1.5455 m.
318
SPE 3rd Edition Solution Manual Chapter 13
New Problems and new solutions are listed as new immediately after the solution number. These new
problems are: 13.A12, 13.A13, 13.D3, 13.D5, 13D6, 13D10, 13D22, 13D30-13D34, 13D36-13D42,
13.E2, 13.E3, 13.G1, 13.G2 . Chapters 13 and 14 from the 2nd edition were rearranged to place all the
extraction material into chapter 13 and the material for other separations in Chapter 14. Thus, the
numbers of many problems have changed.
13.A3.
The amount of solvent should be increased. This will decrease F/S and move the mixing
point M towards S. As a result the saturated extract product E N will be moved down
(less solute). The difference point ∆ will be moved towards the triangular diagram. The combined effect will be that fewer stages are required. By adjusting F/S a condition
requiring exactly two stages can be found.
13.A5.
The vertical axis will be the extract phase and the hypotenuse will be the raffinate phase.
These will be connected by tie lines. Usual procedure can be used.
13.A7.
Situation where E = R and ∆ point is at infinity. All operating lines are parallel. However, this does not correspond to minimum number of stages in extraction.
13.A.11 c.
13.A12. a. C will be spread out and go into both raffinate and extract streams.
b. C will concentrate around the feed edge. If C is very dilute in the feed, can concentrate C.
Then by stopping the feed but continuing to flow solvents, solutes A and B can be
removed. Solute C can now be collected by withdrawing a stream near the feed stage.
13.B1.
Specify:
T, p, z A , z B , F, x Ao , x B , y A N , y BN plus:
y B1 , R, E, N F
x B N , R, E, N F
x A N , R, E, N F
R, E, y B1 , x A N
N, N F , y A1 , E
N, N F , x B N , R
N, N F , x A N , R, etc.
Could also not be given one of standard variables (such as solvent concentration).
13.B2.
a).
One can build stages which are cross-flow (e.g. see Figure 12-12) within a countercurrent cascade. This effectively increases stage efficiency. Not that upward flowing less dense
liquid will be mixed.
b.)
Build chambered stages within a counter-current cascade to prevent mixing of the
dense liquid and give better cross flow on each stage.
c.)
Put in baffles to prevent MIXING of both less and more dense liquids. This will be
more effective if counter-current is arranged so that flow across stages is always in same
direction (see sketch)
319
13.C.7. Start by defining ∆ and the coordinates of ∆ as:
E o R1 , x A
E o y Ao R1x A1 , x D
E o y Do
nd
rd
Removing ∆ from 2 and 3 equations we obtain
Assume that E o
Rj
xA
E o y Ao
R 1 x A1
Eo
R1
(13-43a)
xD
E o y Do
R 1 x D1
Eo
R1
(13-43b)
R 1 . Next write the three independent mass balances around stages 1 to j.
Ej ,
1
R1x D1
xA
R j 1x A j 1
E j y Aj ,
xD
R j 1x D j 1
E j y Dj
These equations are now in a form similar to the form of the mixing equations developed
previously. To develop the three point form of a straight line use the first equation to remove ∆ from the other two equations, solve for R j 1 E j in each of these equations, and finally set the
results equal to each other. The development proceeds as follows:
Use
Ej
R j 1 to remove ∆ from the other mass balances.
Ej
Rj
1
xA
Solve for R j
1
R j 1x A j 1
Ej ,
Rj
Ej
1
E j yA j , E j
yAj
xA
xAj 1
xA
,
Rj
Rj
Ej
1
1
xD
R j 1x Dj 1
yDj
xD
xDj 1
xD
Finally, set these equations equal to each other.
yA j x A
yDj x D
yA j x A
rearrange to:
xAj 1 xA
xDj 1 xD
xDj xD
yAj 1
xA
x Dj 1
xD
E j y Dj
This last equation says that the slope of the line between the points
xD , xA
y D j , y A j and
is equal to the slope of the line between the points x D j 1 , x A j 1 and x D , x A
and
thus the lines are colinear. Furthermore, the lever-arm rule is valid for this system.
13.D1.
a. If we have a single column with only pure solvent then
320
R
y
x
E
44, R
is on op. line. E
R
1
2.273
0.0037 . Thus, cannot get to x o
Op line intersect equilibrium at x
b. Now E
and point x N , y N
x N yN 1
E
100 , Slope R E
0.001, 0.0
0.012 .
74 and R E 1.35 .
44 30
44 0
0.001, but y N
30 0.004
0.00162
74
At x 0.001, equilibrium value of y 1.613 x 0.001613 . Alternative works, but
have pinch point and need very large number of stages.
Still want x N
1
c. This alternative (Say use 25 kg/min of 0.004 butanol)
44 0 25 .004
yN 1
0.00145 which is below equilibrium point.
69
Now
R E 100 69 1.449 m equil 1.613 Thus, this will work. Obtain
0.00145 69
0.012 100
0.001 100
0.0174
69
Op line closer to equilibrium – require lot more stages.
20 0.004
If use 20 kg/min of 0.004 butanol: y N 1
0.00125
64
0.00125 64 0.011 100
R E 100 64 1.5625 , y1
0.01844
64
Will also work. Becoming close to pinch at top equil y1* 0.019356
y1
If 15 kg/min, y N
15 .004
1
0.0010, R E
59
1.0010 59
y1
0.011 100
100 59 1.6949
0.1964
59
y1*
m eq
0.19356
Won’t work.
Thus, there is a small range where option c will work, but with many stages.
13.D2.
R
20, E
20, x IN
Kremser equation
Eq (13-11)
x F , y IN
0, m
R
20
mE
8.333 20
y1
yN
y1 8.3333 x F
y
1
1
*
1
y1*
1
8.3333 x F
8.3333, b
0.12 , y1*
R
mE
N 1
R
mE
1-0.12
1- 0.12
3
0, N
mx 0
b
2
8.3333 x F , y N+1
7.3460 x F , → y1
0
0.9873 x F
321
Rx F
Mass balance,
Recovery = 1 x N x F
Rx N
Ey1 , x N
0.01269 x F
20
0.9873 , which is higher than 0.963 obtained in cross-flow.
13.D3. New Problem in 3rd edition.
From M.B.
R .013
Where R = 100 and the unknowns are E and yout.
y out
and Equilibrium:
S
1.613 x out
E
E .001
1.613 .007
R .013 .007
y out
20 x F 19.746 x F
R .007
0.01129
100 0.006
0.001
E y out
0.01129 0.001
58.309 kg h
Alternative Solution: 1 Equilibrium Stage
y 1.613x
1.613
y
y out
0.01129
R
from graph
E
E
R
0.001 0.01129
E
0.013 0.007
R
1.715
1.715
58.309
.001
x out
.007
x
.013
Another alternative solution:
322
E, y1
Op. Line:
Eq.
R, x 0
x
y
x0
R
y2
R E
Slope
Points x1 , y 2 ,
y2
y1,in
y1,IN
x1
x0
x 0 , y1
T & E in this configuration
Slope
If Eq. line is straight, can Use Kremser with N=1.
Both representations are correct. Treating similar to a flash is easier.
13.D4.
E
But x1 and y1 unknown
x
where y 2
R
On Op. Line
R, x1
E, y 2
y1
y1
1
Or
E
x1
known, N = 1
Since concentrations are low, use wt. fractions and total flow rates.
Equilibrium: y 0.828 x or m 0.828
R
550 lb h, E
mE R
700 lb h, x 0
1.0538 and R mE
*
1
y
b
n
0.828 .0097
mE
1
R
yN
R
1
E
R
x0
E
xN
n
N
.0003
550
0
1
0.0003,
.00046
0.0075
0.00803
y N 1 y1*
y1 y1*
n
y1
0.00046, y N
.94893
mx IN
Kremser Eq. (13-11b), N
0.0097, x N
mE
R
R
mE
0.0097
700
.0077316
.0538
.0004716
550
700
1.5038
33.6
n .94893
13.D5. New problem in 3rd edition.
Part a) Can do with Kremser eq or graphically.
y m x b, m 0.828, b 0
R
400
R 400, E 560,
mE
0.828 560
x0
0.005, x N
0.0003, y N+1
0.0001,
0.862664
mE
1
R
.862664
1.159
323
R
Since
1.0 , can use equation such as 13-11b
mE
y1* m x 0 b 0.828 0.005 0.00414
n
y N 1 y1*
y1 y1*
mE
R
1
N
n
n 1 1.1592
N
where
y1
yN
R
x0
1
E
1.52637
N
mE
R
R
mE
0.0001 0.00414
0.0034571 0.00414
xN
1.1592
n0.862664
400
0.0001
0.005 0.0003
560
0.003457
10.332
0.14773
Alternate solution: Eq. (12-28) becomes
L
R, V
yN
x *N
1
E , N
b
n
0.0001
m
1
x *N
x *N
x0
xN
R
mE
0.000120773 , N
0.828
R
mE
n mE R
1.52637
10.332
.14773
b)
y1*
0.828 x 0
0.828 0.005
0.00414
Equil.
y
E
yN
R E
0.0001
1
xN
y1
y1
Part b.
R
x0
E
100
yN
min
R
1
0.005
E
140
Kremser Eq.
min
yN
x0
xN
1
0.00414 0.0001
0.005 0.0003
slope
x0
0.0003
13.D6. New problem in 3rd edition.
Part a. Ey N 1 Rx 0 Ey1 Rx N
y1*
R
Slope = 0.828
0.005
E MIN
R 0.85957
400
0.85957
0.85957
465.3 kg h
Ext. M.B.
xN
0.0002
100
140
0.0005
0.003414
324
Convert
x
L
R
x
L
R
y
y
yN
E, x *N
V
1
m
0.0002
1.208
0.00016556
100
0.5913
mV
mE
1.208 140
Lots of different forms can be used.
n
N
For example
n
1
N
0.4087
N
x *N
x *N
L
mV
n mV L
n
Becomes
x0
x0
L
1
mV
x0
xN
R
mE
x *N
x *N
R
mE
n mE R
0.005 0.00016556
0.0005 0.00016556
1
n
0.5913
0.5913
1.8717
0.5254
Eq.
Part c.
y EQ
3.6
y 1.208x
1.208x
0.00604
y
R
E MIN
y N 1 0.0002
y 1.208x
xN
R
0.0005
x
slope
x0
0.005
0.00604 0.0002
1.29777
0.005 0.0005
R
100
E MIN
77.05
1.29777 1.29777
Maximum extract out y EQ x 0
0.00604.
Part d. The roles of extract and diluents are switched in the two problems, which changes the definitions
of y and x.
E MIN
13.D7.
Equilibrium:
N
30, R
500, y N
y
0.828x, m
1
0.0002, x 0
0.828, x *N
yN
1
0.0111, x N
.828
0.00037
0.00024155
325
Since rather dilute and linear equilibrium use one of the Kremser equations.
n
N
Where
E
500
x *N
x *N
R
ME
(12-28 (modified))
mE
n
R
x0
x *N
xN
x *N
R/mE
1.21
83.756 . Solution is trial-and-error.
Calculated N
Negative-Not possible Need
0.8626
.929
.9435
.945015
700
650
640
639
xo
xN
R
mE
1
R
mE
1
17.01 E too high
26.175 E too high
29.84 E too high
30.30 E too low
By linear interpolation need E ~ 639.6 kg/h. Can use other forms of the Kremser equation.
Was 13.D10 in 2nd edition.
x is raffinate R L
Convert Kremser
y
y extract, V E
13.D8.
a)
Use 12-31
xN
x *N
Other forms OK x 0
*
N
x *N
1
xN
x0
1
b)
x
yn
KE
R
KE
R
m
1 mV L
mV
L
1
K
1
R
E
x0
3
0
30.488 25
100
30.488 25
1
R x0
xN
0.00001376
3
100
Can use External balance or Kremser to find y out
y1
KE
R
1
1
Ey N
0
1 KE R
0.00092
3
K, b
N 1
1
Ey1
13.D9.
mx
100
25
y1
xN
0.00092 0.00001379
0.003625
Assume very dilute, R = 1500 kg/h, E = 750 kg/h
Equil. Y K d X becomes y K d x
From Table 13-3. K d,oleic
99% recovery oleic:
moleic
4.14, K d,linoleic
.99 .0025 1500
md,linoleic
2.17
y1,oleic 750 → y 1,oleic
.00495
326
Use Kremser, Eq. (13-11b).
y1*
m oleic E
4.14 750
R
1500
4.14 .0025
m oleic x 0,oleic
n
N
For linoleic acid:
yN
1
0, N
y N 1 y1*
y1 y1*
mE
R
1
2.07
0.01035
mE
R
5.44
R
n
mE
R
1500
m lin E
750 2.17
5.44, y1*
Can use Eq. (13-11a):
y1 .00651
Recovery of linoleic:
m L x 0,L
yN
y1*
1
2.17 003
R
mE
N
R
1
mE
.07834
.00651
1
y1*
y1
.9216 ,
.00651
.40866
Re c .003 1500
1
.00124796 → y1linoleic
0.00526
.00526 750 → Rec = 0.877
th
13.D10. New problem in 4 edition.
Analytical or graphical solution OK.
Stage 1
F1x F1 E i
Equilibrium
x 2,out
1.02 x1
Fx F1
1.02 E R1 x1
Mix with Feed 2
1.02 E
R1
1.02 50
R 1 x1
E2
y 2,in
E 2 y 2,out
y 2,out
1.02 x 2,out
0.0099338 100
R2
R 3,in
R 1 x1
100 0.015
F xF
R 1 x1
1.02 E 2
Ey1,out
y1,out
x1
Stage 2
y1,in
151
100
0.0099338
R 2 x 2,out , R1
0.006579, R 2
R2
R1
F1
F1
100
100
100 70 170
327
x 3,in
x 3,in
Stage 3
x 3,out
x 4,out
y 4,out
0.006579 100
0.005 70
170
0.0059286
E3
y3,in
E 3 y3,out
R 3 x 3,out
1.02 x 3,out
R 3 x 3,in
1.02 E 3
R 4 x 4,out
y 4,out
x F2 F2
R 3,in
R 3 x 3,in
y3,out
Stage 4
x 2,out R 2
E4
170 0.0059286
R3
y 4,in
1.02 50
E 4 y 4,out
170
0.00456
R 4 x 4,out , R 4
R3
170
1.02 x 4,out
R 4 x 4,out
1.02 E 4
1.02 x 4out
170 0.00456
R4
51 170
0.003508
0.003578
328
329
13.D11.
R
R
F
2501, E
Equilibrium: K D
E 1000
1.57 . For dilute this becomes m
xN R
Abietic Acid Recovery:
xN
.0475
.0475
R
2501
Top op. Eq.:
y
Goes through pt x 0
Bottom Op. Eq.: y
0.0000190 , y1
R
E
x
R
x
yN
R
1
y1
E
x3
1
0.17594
Rx in
.0475
.05 F x F
.05 1.0 .05
E
1000
R
2500
E
1000
0.0000025
y 4 0, y*1
1
1.2399
0.00742
Ey in
2.5
x N through point x N , y N
1 1.2399
0 0.00742
y1
Overall bal.
0.00742
.95 1.0 0.5
x0
E
m 1.613, R mE 1.2399 , y N
Eq. (13-11a)
13.D13. a.
R
y1
0, y1 . Slope
E
Need 8 ½ stages (see Figure).
13.D12.
.95 F x F
K D in wt. frac. units.
Ey out
mxin
1
0 , R E
0.00742
0.17594
4
0.00742
10 0.0046
R
0.006114
5 0.006114
10
0.1 1000 0.003
xy . 90% recovery, 10% left
x
,out
2.501
0.00154
0.3 kg out
0.0003
330
O xy
For ortho, y max
95% recovery, 5% left
0.15 0.005
0.25 , x O,out
0.00025
0.00075
R
E
For para
0.05 1000 0.005
0.00075 0
max,ortho
y max
0.08 0.003
0.00024
R
0.00024 0
E
0.003 0.0003
max,para
b. The p-xylene recovery controls.
E 1.5 11250 16875 ,
0.1579
0.005 0.00025
1000
E min
0.08888
0.08888
11, 250
R
0.0592592
E
Can use Kremser eq. (13-11b) for ρ-xy to find N
n
N
mE
1
R
y N 1 y1*
y1 y1*
mE
R
R
mE
m 0.080, R E 0.0592592, y N 1 0 , y1* mx o,p
0.080 0.003 0.00024
Mass balance: 90% entering ρ-xy leaves w. solvent.
0.9 1000 0.003
y1
0.00016
wt frac
16,875
R
0.0592592
R
mE
.080
1.35
0.74074, n
0.300106 ,
R
0.0592592
mE
0.080
mE
n
331
n
0 0.00024
0.00016 0.00024
.35
N
1.35
n 0.30
4.012
0.300106
0.30016
Note: Can use other forms of Kremser eq if desired.
c. For o-xy check if recovery > 95%
R
1
*
y1 unknown, y N 1 0
y1 y1
mE
Eq. (13-11a)
N 1
y1* mx 0
0.15 0.005 0.00075
y N 1 y1*
R
1
mE
R
0.0592592
0.39506, N 4.012
mE
0.15
1
y1
yN
1
y1*
1
R
mE
N
R
mE
External M.B.
y1*
1
Ey1
R xN
Rx 0
xN
1
Ey N 1
0.39506
0.00075
16875 .00029194
R
a)
5.012
0.0029194
R x0
5
Ey1
1000
% Recovery
13.D14. (was 14.D4. in 2nd ed.)
1 0.39506
0.00075
Ey1
Rx 0
100
S
10.0
2
MF
F
15.0
3
SM
7.3584 E 5
98.53%
Once have M, use trial-and-error to find tie through M. (final result is shown). This
gives E and R. y A .115, yw 0.04, xA .23, xw .73.
b) Plot raffinate, R x A
.1 . Find tie line through this point (not trial-and-error). This gives
E. Draw Line ER. Intersection with line SF gives M.
S
S
MF
. Find S 85.7 kg/h.
F 15.0 SM
332
13.D15.
Since dilute, use Kremser equations. Assume units are weight fractions.
a) Column 1 at 40ºC. x N 0.0008, N 11,, x 0 0.01, E 1000,, R 100
Equilibrium: m
0.1022, thus y1*
mx 0
0.001022. Kremser (Eq. 13-11a):
1
1.022
0.93664
12
y N 1 0.001022
1
1
1.022
This simplifies to: y1 .093664y N 1 .00092628
y1
1
0.001022
External MB: y N 1E Rx o
which simplifies to:
yN
y1E Rx N , y N
1
1
1000
Solve 2 eqs and 2 unknowns: y1,coll
b) Column 2 at 25ºC: y N
y1,col2
yN
1,col1
1,col2
y1,col1
.6929 10 5 , x 0
1
1000
1 1000 y1
.08
1000 y1 .92
0.00092693, y N+1,coll
0.6929 10
5
0.00092693 ,
0, N
9, m
0.0328, E 1000, y1*
mx 0
0
Use Kremser to solve for R´. This is trial and error. For example, Using Eq. (13-11a),
R
R
1
1
*
0.0328 1000
y1 y1
mE
0.007475
N 1
10
y N 1 y1*
R
R
1
1
mE
32.8
R
50
60
50.5
50.35
RHS 0.007855 0.001981 0.007307 0.007467
Within error R´ = 50.35
y N 1E R x 0 y1E .92693 0 .006929
xN
R
50.35
0.0183
333
c) Could be practical if m’s were larger, and have bigger shift in m. A similar scheme is used commercially for citric acid. Not practical here since have to pump around too much
solvent. In addition, benzene is carcinogenic and would probably not be used as solvent.
R E 10 8 1.25, R mE
13.D16. a.)
*
1
y
y1
m x A0
1.613 0.01
0.01613
0.0002 0.01613
xA
1.25 1.613 0.77495
0.01613. Use Eq. (13-11a),
1 0.77495
1
x A0
0.77495
E
yN
E
1
R
R
b.) Graphical check works fine (not shown)
yj
13.D17.
x6
Note:
x6
R
Ej
xj
y IN
0.27044 → y1
7
R
E0
y1
x j 1,
7.02498 E
R
10
Ej
2
0.01182
4
5
0.0018 (See graph)
x N,countercurrent
0.000702 even though use more total solvent.
334
13.D18. (was 14.D2. in 2nd ed.)
Lever arm rule:
Plot S, F, R and E. Draw lines SF and RE. Intersection is point M.
S
MF
20.3
F
SM
4.5
Or Mass Bal. S + R = M and S y A
Solve simultaneously
4.511 → S
F xA
100 4.511
M x A ( S .15
451.1 kg/h
.5 F .21 M )
S = 483.3
335
Difference is due to accuracy in reading numbers. Lever-Arm Rule more accurate!
13.D19.
Equil.
Kd
Acetone
y0
xN
FD
1000 .9
yA x A
0
1
Y0
0.287 0.158 1.816
0, x 1
0.10 wt frac
900 kg/h water, FS
FD FS
900
1364.1
0.005
X N+1
X1
0.10
.9
1371 .995
0.005
0.995
0.00503
0.1111
1364.1 kg/h chloroform.
0.6598
Equil.
336
XA
xA
yA = 1.86 xA
YA
0
0
0
0
0.01
0.03
0.0101
0.0309
0.01816
0.05448
0.01850
0.0576
0.05
0.0526
0.0908
0.09987
0.07
0.0753
0.1271
0.1456
0.09
0.9890
0.1634
0.1954
0.1
0.1111
0.1816
0.2219
External M.B.
FD
FS
XN
1
Y6
FD
FS
X1
YN or YN
0.6598 0.1111
0.06999, y N
Results pretty close to 13.D43. 2
1
2
vs 2
2
3
0.6598 .00503
YN
1 YN
0.0655
w i accuracy of graphs.
Note: The graph below should read acetone, not acetic acid as the solute.
337
13.D20. a) Batch Operation – Mix together & settle. Find fraction recovered:
R
R
Operating Eq.:
y
x
x 0 , R 5, S
4, x 0 x F
S
S
Which is,
y
1.25 x
1.25 x F
Equilibrium
y
8.333 x, m
Eq. (13-21) written for batch
8.333
x
R̂ Sˆ x 0
m
Frac. Rec 1 0.1304 0.8696
b) Continuous solvent addition:
Sˆ
1
n x t ,final x t ,feed
Eq. (13-28)
Rˆ t m
x t,final x F
Recovery = 99.87%.
exp
0.8 8.33
y iN
1.25 x F
Rˆ Sˆ
0.8
0
9.583
1
8.333
n
0.1304 x F
x t ,final
xF
0.00127
338
13.D21 (Was 14.D1 in 2nd ed.) a. Let A = methylcyclohexane and D = n-heptane.
Mass Balances: F1 F2 S M or M 350
F1 x AF
1
Then
F2 x AF
S y AS
2
x AM
1
F1 x A F
F2 x A F
F1 x D F
M
F2 x D F
1
x DM
M x AM , F1 x DF
1
2
2
F2 x DF
S y DS
2
M x DM
S y AS
100 .6
50 .2
0
S y DS
350
100 4 50 .8
0
M
350
0.2
0.229
Plot M. Find tie line through M. (See figure.) This gives location of points E and R.
Find x DR 0.48, x AR 0.42, y AE 0.06, y DE 0.05 .
b.
Mass balances: M
E R and Mx AM
Ey AE
Rx A R
Solving simultaneously: E = 214 and R = 136 kg/h
13.D.22. New problem in 3rd edition.
1
Af
D s2 4 0.411 and Pperf
2
With interface at center, heavy phase flow area is
1
D s D 5 2.630
2
r
θ
Chord
.1
.4115
Ds 2
0.5115
Center
r
Interface
α
(length = C)
arc
θ
r
.1
α
C/2
C
2
2
.1
C
2
1.00326 m
339
2
Draw right triangle for interface below center to calculate new perimeter.
0.1
.1
sin
.1955
11.274
r
.5115
Then angle of arc,
180 2
157.452
3.14159 0.5115 157.452
r
Length of
arc
1.4056
180
180
Perf C arc length 2.4089m
Mensuration formulas are from CRC Standard Mathematical Table.
Re settler
4Q
c
Perf
4 0.006 998
c
2.4089 0.95 10
3
10, 466
Interference somewhat more likely than in Example 13-5.
13.D23 (was 14.D7. in 2nd ed.)
Pyrdine
F x AF
Plot M on line FS .
y p 0.223,
a) F S 500 300 M
S y AO 500 .3 0 M x AM → x AM
150 800
0.1875
By T & E find tie line through M (Use Conjugate line)
x p 0.84 ; y w 0.02, x w 0.84 ;
Mass balances: R1
E1
800 , 0.84R
M
0.02E
0.43M
Solve simultaneously, E1 ~ 400, R1 ~ 400 (Note: More accurate than pyrdine values.)
R 1 S2
b)
R1x A1
S2 y A0
60
x pyr M 2
700
Find tie line by T & E: y pyr2
MB:
R 2xw2
E2 yw 2
R2
Solve simultaneously: E 2
400 300
700
400 0.15
0.053 ; y w 2
M x m2w → 0.945 R 2
M
60
M 2 x AM 2
0.086
0.120; x pyr2
E2
M2
0.005, x w 2
0.005 E 2
0.945
700 0.48
700
346 and R 2
354
340
341
13.D24 (was 14.D10. in 2nd ed.)
a) Feed 40% MCH 55% n-heptane, F = 200. Solvent 95% aniline
& 5% n-heptane, Stotal 600 . S F M 800
S
Lever arm rule:
3
F
FM
MS
. Find M (Easy way is divide line FS into 4 parts)
Use tie line through M to find points E & R (T & E)
Extract: y MCH ~ 0.045, Raffinate:x MCH ~ 0.36 wt fracs
Mass balance E + R = 800 = M and lever arm rule
Solve simultaneously:
b)
E
MR
R
ME
. Measure distances on figure.
R = 124.61 kg/h, E = 800 – R = 675.39
2 stage cross flow. Stage 1: F = 200, ρ = 300, S
3
FM
F
2
MS
. Find point M. Tie line through M
gives points R1 and E1.
Mass balance 500
Find:
F S
R1
M
R1
E1 and lever arm rule
207.04 kg h , E1
R1
E 1M 1
E1
M 1R 1
292.95
Note: Isotherms are very sensitive. Thus, calculation is not extremely accurate.
Stage 2: Mass balance R 1 S2
M2
507.04
R2
E 2 and lever arm
S2
M 2R1
E1
M 2S 2
Find M 2 and from tie line through M 2 find R 2 . Then can find R2 and E2 from mass balance
(given above) and new application of lever arm rule,
Solving simultaneously, R 2
R2
E 2M
E2
R 2M
196.16 kg h. E 2
310.88
342
13.D25 (was 14.D9. in 2nd ed.) a. Draw lines from S to F and from R 1 to E N . Intersection gives point
M (see Figure). Then from lever-arm,
b.
S
FM
F
SM
1.25 → S
∆ is at intersection of lines E N R N
1
1.25 2000
2500
and E 0 R1 . Then step off stages as shown. Need 2 stages.
343
13.D26. (was 14.D6. in 2nd ed.)
Guess a value for M and step off stages. Repeat until need 3 stages.
After three trials found M shown in Figure. This required 3 1/10 stages which is close enough.
Extract Composition: Acetic Acid = 10.5%, Water = 3.5%.
Raffinate Composition: Acetic Acid = 5%, Water = 93%
Solvent Flow Rate: F S F
Raffinate Flow Rate:
R1 E 0
EN
Extract Flow Rate:
1.112
y AE
y wE0
0
E0
MF
F
E0M
R1
M
R1
R 1 5600, R 1
2000 5600 772
770 kg/h.
6830
0 (Pure solvent)
. Step off stages
211.2 kg/h & lever arm:
Solve simultaneously, R1
2000 S 2000 → S = 5600 kg/h
. Find M. Line RM intersects sat’d extract at E N , y A N
Lines F E N & R1E 0 intersect at
M.B. E N
E0
F S R1
13.D27 (was 14.D12. in 2nd ed.)
Lever arm rule:
SM SF 15 57
64.25, E N
0.18
3 more than enough. Need ~ 2 ¼
EN
MR 1
R1
ENM
2.287 (from graph).
146.95 kg/h
344
345
13.D28 (was 14.D14. in 2nd ed.)
To find ∆: 1) Plot E N and R N
2)
Ej
Rj
EN
1
E N x AN
xA
RN
F
1
1500
1
R N 1x A N 1
0.06666
3) ∆ is on line through points E N and R N 1 .
Plot ∆. Or, use lever-rule.
RN
R N 1E N
1
EN
1.5
Step off three stages starting at point E N . This gives points
R 1 x A1
Mass Balance: E 0
0.275, x D1
RN
E 0 0.13
and
R1
1
E N → E 0
1000 0.4
Solving simultaneously, R 1
13.D29 (was 14.D16. in 2nd ed.)
0.675 and E 0 y A1
R1
EN
R 1 0.275
655 kg/h, E 0
.13, and y D 0
RN
1
0.0 .
R 1 1500
2500 0.2
2155 kg/h
a) Plot Points F, S, E N and R 1
Find ∆ point at intersection of lines FE N and R 1S
2 stages is more than enough. (see graph)
b)
Draw lines FS and E N NOT calc. value E 2 R1 .
Intersection is mixing point M
F
dist. S to M
S
F 0.786 1000 0.786 1272 kg/h.
dist F to M
Mass balance
Give S
F + S = M and Lever arm
0.786
346
Alternate: Overall MB, F S M and Diluent mass balance,
650 F x F,D S yS,D M x M,D 0.28 M
M
Solve simultaneously:
2321 and S
1321 kg/h. But this is less accurate.
13.D.30. New problem in 3rd edition.
Equation (13-59) becomes Qc /Ai < ut /(1 + safety factor).
Using the equals sign and solving for the safety factor Sf we have,
Sf = ut Ai / Qc -1 = 0.00172 (1.0)(4.0)/.006 – 1 = 0.1467
where Ai = Ds Ls. Thus safety factor is 14.67% instead of 20%. This may still be acceptable.
50
13.D.31. New problem in 3rd edition. Soln. A. Kremser Soln.
R mE
0.30998 1.0
161.3
R 50, E 100, m 1.613, b 0, y 2 0.0, x 0 0.01
For example, Use 13-11.
yN
y1
x1
Soln. b.)
1
y1*
y1
*
1
y
1
1
R
mE
N
R
mE
y1*
1
mx 0
becomes
0.01613 0.01613 .7633696
y1 m
b
0.01613
y1 0.01613
0 0.01613
1 0.30998
1
0.30998
2
0.7633696
0.00381684
0.00381684
0.0023663
1.613
Do mass balances and equilibrium for single stage.
347
Sy IN Fx F Sy Fx
0 0.5 100y
50x
also y x 1.613 . Solve simultaneously and obtain identical result.
Soln. c.
Do graphically as single stage system.
Soln. d.
Do graphically as counter-current system, N=1. Solution is valid, but awkward.
13.D.32. New problem in 3rd edition. Fixed Dispersed Phase.
Q sol Q feed Q feed
Q tol
At feed conditions
tol
Q sol
Q tol Q feed
Q feed
Q feed
Q feed
0.6 .006
Q sol Q feed
Q sol
.006 .6 .006
1
Q feed
Equation 13-48 operation in ambivalent range.
a)
.6
tol
.3
L
1
0.3
From Example 13.5
L
L
H
0.375
H
L
0.625
1.6
Q sol Q feed
1 Q sol Q feed
.375
865 0.95 10
998. 0.59 10
3
0.3
3
1.10235
0.375
The
1.10235 0.6614
0.625
Either phase can be dispersed.
1.0
b)
0.5 , also ambivalent range
d
2.0
.5
Either phase dispersed
1.10235 1.10235
.5
2.0
c)
.6667. According to 13-48 at border.
d
3.0
.6667
water probably dispersed
1.10235 2.2
.3333
5.0
d)
.8333 Equation (13-48), water (heavy) dispersed.
d
6.0
0.8333
1.10235 5.5 water dispersed.
0.16667
13.D.33. New problem in 3rd edition. t re s Vliq Qd Qc
1.5 min 90s
Qd
Qc
0.0072 m3 s , Vliq
90 s 0.0072 m3 s
Note that there is a 1 inch air gap at top
Vliq
H t 0.0254 d 2tan k 4 0.648 , H t
Vliq
2d tan k
0.0254
Using Goal Seek d tan k
d 2tan k 4
0.648m3
2d tan k
0.648
0.7489 and H tan k
1.4978
348
13.D.34. New problem in 3rd edition. N = 500 rpm = 8.335 rps
d i 0.20 d tan k
0.2 0.8279 0.16558 m
Use water values for
Re L ,estimate
M
d i2 N
998 kg m3 and
w
2
0.16558
L
8.335 998
Curve b in Figure 13-32 again predicts a constant N p0
Then from Equation (13-52), P
P
4.0
M
2
8.335
2
N P0
.16558
M
5
40
d 5i g c where g c
1.0
0.95 10 3 kg m s
w
240, 064
3
0.95 10
L
M
0.034587
N
1.0 and
8.335.
(A)
M
will be fairly close to c
998 since Q W 5QToluene (see Equation (13-53)).
W
The series of messy terms for Equation (13-56a) can be calculated. Since the tank dimensions and
physical properties are the same as in Example 13-5, the only term on the RHS of Equation (13-56a) that
is different is P. Thus the result in the same as Equation B in Example 13-5, d 0.0576 P 0.3
(B)
In addition to Equations A and B, we need to solve Equation (13-53)
(C)
1 d c 865 d 998 1 d
M
d d
M
Solving equations A, B and C with Goal Seek we obtain
Then solving Equation C,
M
d
1
d
d
0.146 and
d
0.146 865
c
d
d,feed
0.874.
0.854 998 978.6
Equation (B) P 0.3
2.876
P 33.84 W.
d 0.05076
nd
13.D35 (was 14.D11. in 2 edition)
From Eq. (12-46),
E1 K 1
E2K 2
B1 1
, C1
, D1 R 0 x 0
R1
R2
(Eq. 6-6) For 1 < j < N A j
1, B j
(Eq. 12-48) For Stage N A N
Example 13-4: R 0
1000, x A0
For Acetic Acid, K A j
1, B N
0.35, x D,0
E jK j
1
Rj
ENKN
1
E j 1K j
, Cj
RN
Rj
, DN
6 , EN
0.65, N
1
FN z N
1
, Dj
Fjz j
0
1
E N 1y N
1475, yA,N
1
1
0, yD,N+1
0
y Aj x A j : Use Fig. 14-4 to estimate K A, j .
K A1
K A4
0.03
0.1
0.12
0.5
0.3, K A 2
0.15
0.14
0.33, K A 3
0.09
0.21
0.16
0.43
0.5, K A 5
0.5, K A 6
0.5,
0.24
0.28
0.32
For first guess assume constant E 1475 and R 1000.
Then
C1
D1
B1
1
E 1K A1
R1
E 2K 2
1475
R2
1000
R D x A ,0
1
0.33
1000 0.35
1475 0.3
1000
1.4425
0.48675
350
349
and so forth with D6
1
DN
475 0
2
0 . Thus matrix for acetic acid is,
3
-0.48675
0
1475
1475
4
0
0
0
0
0
0
0
1.4425
2
-1
3
0
4
0
0
-1
5
0
0
0
-1
6
0
0
0
0
1000
.33
.43
1000
1
-1
1475
1000
1475
.43
0.5
1000
1
6
0
1
1
5
1475
1000
1475
0.5
1000
1475
1
1000
0
0.5
1475
0.5
1000
1
-1
1475
1000
0.5
0.5
13.D.36. Part a. New problem in 3rd edition. See figure
Forg
C Aq ,0
FAq
*
org ,1
Min
Forg,Min
Forg
b.
C
0.736 FAq
1.4 147.2
Operating line goes through CAq,N
Corg,1
See Figure.
C Aq ,N
C
*
org ,N 1
0.10 0.008
0.133 0.008
0.736 200 L h
206.08 ,
147.2
Forg
206.08
FAq
200
0.008 and Corg,N
1
0.736
L
h
1.0304
0.008 with slope 1.0304.
0.097
3 stages more than enough.
~2
3
4
stages needed.
350
Part c.
MW Zr NO3
4
91.22 4 14.0067 3 15.994
MW water
2 1.00797
15.994
18.00994
351
Basis 1 liter 0.10 mol Zr NO3
4
Have
33.917g Zr NO3
and
1000 g
33.917
4
966.083 g water
966.083 18.00994 53.64 mol water
.1
Mole frac.
Zr NO 3 4
0.00186
53.64 .1
33.9179
Mass frac.
Zr NO 3 4
0.033917
1000 g
System is dilute if consider mole fraction, less so if use mass fractions. If densities are constant,
then constant flow rates is valid. Even with variable density, solving problem with mole fractions and
constant molar flow rates would be accurate. This would require converting equilibrium data to mole
fractions. Use of fractions with concentrations in mol/L is NOT correct.
which is
13.D.37. New problem in 3rd edition.
Part a. HETPlarge-scale = HETPpilot (Dlarge/Dpilot)0.38 = (0.24 m) (1.1 m/.05 m).038 = 0.78 m
flarge-scale = fpilot (Dpilot/Dlarge)0.14 = (1.4 s-1)(.05 m/1.1 m)0.14 = 0.91 s-1
Part b. HETPlarge-scale = HETPpilot (Dlarge/Dpilot)0 = HETPpilot = 0.24 m
flarge-scale = fpilot (Dpilot/Dlarge)0 = fpilot = 1.4 s-1
c. Use of the more conservative design developed for difficult systems (n 1 = 0.38, n2 = 0.14) results in a
much higher HETP and thus a much taller column and more expensive column than use of the design
procedure for easy systems (n1 = 0, n2 = 0). Considerably more data is needed for a large variety of
systems to determine best design practice. If a variable speed motor is used in the large-scale system the
difference in predicted optimum frequency is not as serious because the system can tuned to find the
optimum frequency.
New problem in 3rd edition.
13.D.38.
MWwater
18.02,
F 1.0 kmol hr ,
MWtoluene
S
92.14 , m
0.06 kmol hr.
C toluene
C raffinate
C water
0.00023 ,
x IN
20.8
y IN
0
→ x out Fx in / F Sm
Note m m. m is equilibrium in mole fraction units. Assume extract has properties
toluene and raffinate properties of water.
F x IN
m
Fx out
Sy out and
C extract
kmole benzoic
m 3 extract
20.8
kmole benzoic
m 3 raffinate
Units on m are
y out
m x out
1
865 kg tol m 3
92.14 kg toluene
kmol toluene
1
998 kgW m 3
18.02 kgW
kmol W
122.71
kmol benzoic kmol extract
kmol benzoic kmol raffinate
352
1.0 0.00023
x out
1.0
0.0000275 , y out
0.06 122.71
If use m
20.8 find x out
13.D.39.
Feed is 0.1
1 equil. stage
1 .00023
122.71 0.0000275
1 .06 20.8
0.00337
0.000102, WRONG!
New problem in 3rd edition.
CC 4 , 0.9 AA. F 10 kmol h . Solvent pure. S 10 kmol h.
Lever arm:
S
10
F
10
1
FM
SM
x F,CC
, Alternatively
x M ,CC
4
x M ,CC
4
x S,CC
4
4
S
F
1
Then x M,CC 4 0.05
Find Mixing Point M.
[The figure is shown at the end of problem 13D39 as the single stage mixing line.]
Phases split along the line –TE to find the line through M
Rafinate: x CC 4 0.041, x AA 0.54 . Extract: yCC 4 0.095, y AA 0.07
Overall Balance:
E+R+=F+S+=20
CCℓ4 Balance:
.095E+0.041R = (0.0) S+0.1 for F=1.0
Solve simultaneously, R 16.6667,
E 20 R 3.3333
NOTE: Since CCℓ4 mole fracs can be read more accurately, the CCℓ4 balance is
probably more accurate than the acetic acid balance equations.
13.D.40.
S1
S
2
CCℓ4
1
2
E1
R1 = R2 single stage = 16.6667
Mix with S2 = 10 (pure)
E2
x M 2 ,acetic
16.6667
R1
SM 2
10
S
R 1M 2
x M2,AA
R2
x R 1 ,acetic
x M 2 ,AA
x Sacetic
x M 2 acetic
0.54
0
x M 2 ,AA
.54 1.6667 2.6667 .3375
Find M2 and by trial and error find a tie line though M2. See figure on next page.
Extract 2,
yCC 4 0.046
y AA 0.065
Raffinate 2,
R2
CC
4
E2
x CC
4
x AA
R 1 S 16.6667 10
balance
Substitution
R2
0.018
19.40 and E 2
0.018R 2
0.018 R 2
0.57
26.6667
0.0046E 2
0.041 16.6667
0.046 26.6667 R 2
0.0 10
0.68333
7.16 kmol h .
353
354
13.D41. New problem in 3rd edition.
R N 1 F 10,
x CC 4,N 1 0.1,
x AA,N
E0
S 14.5,
1
1.0 , y CC
y TEA,0
0.9
0.091
4,N
Mixing. Use lever arm rule.
1.45
14.5
S
FM
10
F
SM
xN
x M ,CC
1,CC
4
xN
1,CC
x M ,CC
S
y S,CC
F
SF 1
4
4
x M ,CC
4
y S,CC
.1
4
4
4
1.45 0
0.041
2.45
Find M. Draw E N MR 1 line. See figure on next page.
Raffinate:
x1,CC
4
0.008
x1,AA
.58
Passing Streams
E N R N 1 & E O R 1 intersect at .
Very close to parallel. Use parallel lines to step off stages.
Estimate # Stages = 3.
Flow rates
24.5 F S E 3 R 1
CC
4
balance. F .1
E3
S 0
1.0
E 3 .091
R1 0.008
1.0 24.5 0.008
9.69 kmol h , R 1 24.5 9.69 14.81
.091 .008
Can compare to 13.G.2 Part c.
Extract 10.066 and Raffinate 14.433
Extract Mole fraction y TEA 0.841 x CC 4 0.0913 y AA 0.067
Raffinate Mole fraction
x TEA
Two results are reasonably close.
.418
x CC
4
0.0056
x AA
.577
355
356
13.D42. a. First, plot points EN and R1 on the saturated extract and saturated raffinate curves,
respectively.
Second, Find point Δ at the intersection of lines FENΔ and R1SΔ.
Third, step off equilibrium stages. Need about 3. See graph.
Part b. Easiest: use the lever-arm rule. Find mixing point M at the intersection of lines FS and ENR1.Then
S FM
0.81 F
1235kg / h
F SM
Can also write 3 mass balances (overall, pyridine, and water) and solve for the unknown flow
rates F, EN and R1. Unfortunately, this will not be very accurate because it is difficult to read the water
values accurately.
13D.43 (was 14.D5. in 2nd ed.)
Plot points for F, S
Use lever-arm rule to find point M.
E 0 , and R 1 (on saturated raffinate line)
E0M
F
1000
S 1371
FM
Line R 1M intersects the saturated extract curve at E N . x acetone
0.067 .
Lines FE N and R 1E 0 intersect at ∆ (a second piece of paper was attached to find ∆ accurately). Step off stages. 3 is more than sufficient. Need about 2 & 2/3 stages. This
is close to the 2 + ½ estimated in problem 13.D19 with a McCabe-Thiele analysis.
357
358
K Dm
13.E1.
Since
E
K Do
R
y m,N
Estimate: E
E
0.05, K Do
1
20, E
200, F 1
1 ortho goes up column and since K D M
yo,N
1
0, x m,0
E .52F and R
200.52 and R
Recoveries:
0.15, R
20.48,
.92 .52 1
x ortho,N
x o,0
E
R
1 meta goes down.
0
R .48F
R
20
E 200.52
E y ortho,1 or y ortho,1
0.09974 and
R
20.48
E
200
0.1024
0.002386
0.00203
.94 .48 1 Rx meta,N or x meta,N .02179
Plot equilibrium curves and operating lines (see Figure)
Feed cannot be 3rd stage since cannot get x m N desired. Cannot be 5 as will be past
intersection of R E and meta op lines.
Thus feed must be 4th stage. Do not get match of total number of stages.
Need 8 1/3 for ortho and ~ 5 2/3 for meta.
A very slight adjustment of recovery meta will change this. (Meta is approaching a pinch
point at feed stage). 93% recovery was not enough. Therefore, need ~ 93.5% recovery
with ~ 8 stages.
359
13.E.2. New problem in 3rd edition. Part a.
x N,p
Part b.
xy
0.04 .004
Paraxylene:
96% recovery. 4% p-xy left in diluent
0.00016 wt. frac.
y
Ka
0.080
m, E
20, 000, R
x
Eq. (12-28) converted to extraction notation is convenient. L
n
x0
xN
R
mE
1
N
n
x0
n
N
Part c.
x *N
x *N
ortho-xy m
0.004
0.00016
xN
xN
x *N
x0
*
N
x
R
yN
x *N
V
m
1
0.
Thus
E
mE
R
0.00016,
.625
R
1000
mE
0.080 20, 000
2.3025
0.006, x *N
0,
0.625
4.899
0.470
0.150, x 0
1000
R
mE
n 1 .625
Eq. (12-31) Converted:
Part d.
m-xy
0.004, x N
.375
,
mE
0.150 20000
R
1000
3
1 mE R
1
mE
R
N 1
1 3
0.006
1.842 E - 5
1 35.899
Alternative Solutions are presented below for meta-xylene.
m 0.050, x 0 0.005, x*N 0, N 4.899 E 20,000,
mE R
R
1000, b
0
0.05 20, 000
1
1000
Must use special form. But the L mV 1 form in terms of x is not available. Thus, need to
derive, or translate or find in another source. Looking at development of Eq. (12-12).
N x x0 x N
Solving for N,
N
x0
xN
x
Where Δx is determined in same way Δy was determined for Eq. (12-12),
L
y1
x0 b
y1
V
x x j x j 1 const
x0
L V
L V
Alternatively,
x
yN
1
L
xN
V
L V
b
yN
1
L V
xN
360
Translating to this extraction problem,
x0
N
And solving for xN, x N
xN
L V
x0
x
x0
0.005
N 1 5.899
R E , yN
1
0,
x
xN
xN
xN
0.0008476
Alternative Solution: Redefine terms to match Eq. 12-12 [Relating y to solvent and x to raffinate is
arbitrary. Switch these definitions.]
y N 1 meta xylene in hexane 0.005
y1
m
1
1
Kd
0.05
mxy out is unknown
20, b
yN
1
y1
0, L
N y1
E
x 0 is now inlet solvent
20, 000;
L
V
x0
b
L
20, 000
mV
20 1000
4.899 y1
20 0
0
1, V 1000
0
361
Solve for y1,
yN
y1
0.005
1
5.899
5.899
0.0008476
This is actually x N in normal notation.
Part e. Shown for normal notation.
pxy equil slope = 0.080
y EQ
0.080 .004
0.00032
y
yN
1
0
x 0,pxy
x
x N ,pxy
0.004
0.00016
0.00032 0
Slope Operating line
R
Slope
E MIN
0.004 0.00016
R
0.08333 , E MIN
0.08333
0.08333
1000
0.08333
12, 000 kg h
13.E.3. New problem in 3rd edition. Part a. Plot the equilibrium data and points F and S. Straight line
from power F to point S passes through mixing point M. Since amounts of F and S are equal,
M is at the half-way point of the line. Find tie line through M by trial-and-error. This is
difficult since tie line is very sensitive.
Approximately, raffinate x AR
and extract y AE
Mass Balances:
0.326
x DR
0.575
0.046
y DE
0.058
E R S E 40
R 40 E
Ey AE Rx A,S Sy A,s Fx AF 20 0
Solve simultaneously, E
18.0 kg , R
20 .4
8
22.0 kg.
Part b. First add solvent until reach saturated raffinate curve at intersection with FS line.
Initial Raffinate x AR 0.36,
x D 0.54
R INIT x AR
R init
Fx AF SINIT x AS
8 x AR
8 0.36
20 .4
SINIT 0
8
22.22 kg
SINIT R INIT F 2.22 kg
Second, use Eq. (13-27) for the continuous solvent addition batch extraction.
362
x t ,final ,A
S
R
x t ,feed ,A
dx t ,A
yA
x t,feed,A is the raffinate after solvent addition to form two phases
x t,feed,A
0.36 , x t ,final,A
x A,initial raffinate
0.292
From equilibrium find values y A (extract), Approximate values are:
x A,t
yA
0.048
0.046
0.045
0.36
0.326
0.292
0.292
1y
20.8
21.7
22.22
dx A
0.36 0.292
yA
6
0.36
Sadded
1.47R t
20.8 4 21.7
1.47
Eq. A
In the derivation R t is assumed constant, R t
Sadded
22.22
R t,INIT
22.22 kg
32.66 kg
With this approximation E Sadded . 32.66 kg
Solute mass balance
R t x A,INIT Sadded y A,added R t x A,final
y A,added
y A ,Avg
0, x A,INIT
Ey A,Avg
0.36, x A,final
22.22 0.36 0.292
32.66
0.292
0.046
If we do not assume R is constant, then Eq. (13-27) is
x t ,A
Sadded
d R x t ,A
dS added
0
yA
x t ,INITIAL ,raf
We would need to do a numerical integration with a calculation of R x t,A versus y A . this
can be done, but is challenging.
13.G.1. New problem in 3rd edition.
Extract 1: flow 3.90769, xTRA
Raffinate 1: flow
Extract 1:
Raffinate 2:
0.84986, xcarbontet
16.03923, x TEA
flow
flow
0.085102, xAcetic acid
0.41361, x carbontet
11.63396, x TEA
0.91426, x carbontet
14.40527, x TEA
0.065042
0.041332, x Acetic Acid
0.036586, x Acetic Acid
0.54506
0.049149
0.41633, x carbontet =0.016472, x Acetic Acid =0.56719 .
Entering carbon tet 0.10 10 1.0 kmoles hr
Leaving in raffinate
0.016472 14.40527
In Out in Raffinate
Extracted
% extracted = 76.27%
0.23728
0.7627
363
13.G.2. New problem in 3rd edition.
Part a, 3 stage cross-flow. All flow rates are kmol/h
Total Flow rate
TEA flow
CCl4 flow
Acetic flow
Extract 1
3.961
3.366
.3371
.2576
Extract 2
11.634
10.637
.4256
.5718
Extract 3
11.052
10.419
.1554
.4777
Raffinate 3
13.353
5.580
.0819
7.693
Carbon tet remaining in raffinate 3 is 0.0819 kmol/h. Since carbon tet feed was 1.0 kmol/h, 0.9181
kmol/h was extracted. Fraction extracted = 0.9181/1.0 = 0.9181.
Part b. 3 stage counter-current with S = 10 kmol/h.
Extract 1
4.9142
3.723
.7242
Raffinate 3
15.086
6.277
.2758
.4672
8.533
Carbon tet remaining in raffinate 3 is 0.2758 kmol/h. Since carbon tet feed was 1.0 kmol/h, 0.7242
kmol/h was extracted. Fraction extracted = 0.7242/1.0 = 0.7242.
Part c. 3 stage counter-current with S set to give same fraction extracted as in part a (0.9181) and outlet
raffinate carbon tet flow rate of 0.0819 kmol/h. This is trial-and-error.
First trial: S = 20 and CCl4 raf 3 flow rate = 0.0289
Second trial: S = 18 and CCl4 raf 3 flow rate = 0.04045
Third trial: S = 16 and CCl4 raf 3 flow rate = 0.0590
Fourth trial: S = 14 and CCl4 raf 3 flow rate = 0.0908
Fifth trial: S = 14.5 and CCl4 raf 3 flow rate = 0.08104
This is close enough.
Final Results:
Extract 1
10.066
8.469
0.9189
.6786
Raffinate 3
14.433
6.031
0.0810
8.321
364
SPE 3rd Edition Solution Manual Chapter 14
New Problems and new solutions are listed as new immediately after the solution number. These new
problems are:14.A3, 14.A4, 14.C5, 14.D6, 14.D9, 14.D11, 14.D15-14D17, 14.E2, 14.E3. Chapters 13
and 14 from the 2nd edition were rearranged to place all the extraction material into chapter 13 and the
material for other separations in Chapter 14. Thus, the numbers of many problems have changed.
14.C.5. New problem in 3rd edition. Part a. y
y, x
x, m 1, F
U, S
where
F, U, S, O, R, E are kg
Eq. (13-27b) becomes
U
U
y
x
x F y IN
O
O
U
and (13-21)
x
x IN y IN
1 U O and y = x
O
Part b.
Eq. (13-29b) becomes
O 1
n x t ,final x t ,feed
U K
Where K y x at equilibrium = 1.0 in washing.
n
14.D1. (was 13D29 in 2nd ed.)
a) Translate eq. (12-28),
U
mO
1
N
O, R
U, E
x *N
x *N
x0
xN
O
U
mO
n mO U
Note: x in wt frac. translates to x in kg m 3 if densities are constant. Densities cancel. For
washing equilibrium is equal overflow & underflow concentrations. Thus, m = 1, b = 0
yN 1 b
H 2SO 4
x *N
y N 1 0, x 0 1.0, x N 0.09
m
U
40
mO
1
0.8 and
1.25
mO
1.0 50
U
0.8
n
1.0 0
0.09 0
1 0.8
N
0.8
4.96
n 1 0.8
b) HCℓ Use Eq. (12-31) or (14-8)
xN
x0
N
1
1
xN
x *N
x0
*
N
mO U
mO U
4.96,
N 1
x
1
1
0.75
mO
1.0 50
U
40
mO U
mO U
N 1
1 1.25
1 1.255.96
1.25, x *N HC
0.0674 kg m 3
yN
1HC
m
b
0
Alternative:
363
xN
Note:
x0
xN
x0
HC
=0.09
H 2 SO 4
Thus, if one is clever and realizes change will be same for HCℓ & H 2SO 4
since
mO
U
& N are identical , don’t need to use Kremser eqn for part b.
14.D2. (was 13.D22 in 2nd ed.)
a. 1000 cc sand = 400 cc underflow liquid. This is about 400 g = 0.4 kg
liquid. Equil: y = x. Use nomenclature of Table 13-4.
U
U
Operating Eq. y j
xj 1
y in
x out
O
O
U .4
Slope
0.8. Goes through point (y = 0, x = 0.002)
O .5
Overall bal.
O yin U x in U x out O y out
O
.4 0.035
.4 .002
.5 yout → y out
.0140 .0008
.5
0.0264
Need 6 2/3 Stages – See Graph (Can also use Kremser eq.)
b. Mass Balance:
Op. Eq.:
U xj
yj
O j y jin
U
Oj
xj
U xj
y jin
O jy j
U
Oj
xj
1
U
2 slope , x out 0.002 (see graph)
O
Obtain approximately same separation, but use much more wash water.
(was 13D23 in 2nd ed.)
U
14.D3.
1
0.4, O
0.2,
364
y
y
4
y
3
2
y
1
2
1
U=3
x
4
3
U=3
4
O
y
Basis:
O
2
3
y
0
in 3
2
4
in 4
0
O
y
2
in 2
2
0
O
2
1
y
0
in 1
1 kg CaCO 3 solids
Feed Mole frac. can be arbitrary. Pick x 0
U x iN
M.B.
O yiN
U
y out
x out
U x out
0.01 as basis
O y out
U
x iN y iN
O
O
y out , x out at Equil (y = x) line
x in , yin
Point
Slope Op line
x in , 0 is on op line
U
3
O
2
See graph.
Find
Recovery
1
x4
0.00127
x0
0.01
0.127
x4
1 0.127 0.873
x0
Recovery is significantly better with counter-current process.
365
14.D4.
(was 13D24 in 2nd ed.)
0.8 0.8 0.2
0.8,
1
4, O
4000 kg/h
366
U F1
1000
kg
h
dry solids
U F2
UT
In section 2:
Slope
U F1
UT
yj
O
Intermediate feed at x
Slope
xj
L liquid
L solid
kg
.8
h
.2
U F2
1
1.0
3200
1600
U F1
O
xF
xj
1
kg liquid
h
kg liquid
2.5
kg liquid
4800
h
UT
y0
x1
O
h
4800 4000 1.2 Goes through point y0 , x1
UT O
In Section 1: y j
2000
4
kg liquid
L liquid
kg solid
2.5
L solid
1.0
0, 0.006
0.02
U F1
yN
U F1 O 1600 4000
O
xN
1
y N , x N+1
0.4 . Goes through point
Also intersects Section 2 op. line at feed line. (Or calculate y N from mass balance). Equilibrium
is y = x. Step off stages (see Figure). Need 5.4 equilibrium stages. Opt. Feed is 4 th.
14.D5.
(was 13D25 in 2nd ed.)
F1: 1000
kg dry
0.8, 1
0.2
1
1
kg dry
L solid
h
2.25
0.2
L
L under flow
kg dry 1
1
F2 : 2000
4000
h
2.5 0.2
2000 L
h
L
h
F1 5 wt %
F2 2 wt %
367
2000L
Liquid Volumes:
total 0.8 liq
h
3200 L liq
4000 0.8 liq
h
5 wt %
2 wt %
h
4800
FT : Total liqd h
L liq
1600
underflow
U0
ON
1
4000 kg h , y N
x0
144 4800
Ext. MB,
U
0,
1
f
4000
1.2,
O
4800
y1
U0 x 0
1
1600
U0x0
U
O
O
U
xN
O
mx 0
n 1 0.8333
N
where
kg liq
h
1.0 kg L
f
0.05
kg N a 0H
kg liq
3200 0.02
0.006
UNx N
Convert to Kremser
O
V, U
L, m 1, y1*
Eq. (12-30)
h
U 0x 0
0.030 , x N specified
ON 1 y N
kg liquid
O1 y1
x0
x0
xN
4800
4000
0.030 0.006
0.030, mV L
0 0.030
0.0288 0.030
n 1.2
4000 4800
0.0288
0.8333
0.83333
8.83 or 9 stages
Use 2 feeds!
14.D.6. New problem in 3rd Edition. 2.5 kg wet is 1 kg dry solids-insoluble, and 1.5 kg underflow liquid.
1 kg dry solids
Part a.
10 kg total
4 kg dry insoluble solids
2.5 kg total
1.5 kg liquid
6 kg liquid. , Ov 10 kg liquid.
kg dry solids
Before 1st mixing: 0.05 frac BaS
6 kg liquid 0.3 kg BaS
0.3 kg BaS
0.01875 mass frac in U & Ov.
1st Mix:
16 kg liquid total
U
4 kg dry solids
Settle – (6 kg liquid in U)
2nd Mix Pure Water
0.01875
0.1125 kg BaS
0.1125 kg BaS
0.00703 mass frac in U & Ov.
16 kg liquid
Settle – (6 kg liquid in U) 0.00703 0.0421875 kg BaS
0.0421875kg
0.00264 mass frac BaS in U and Ov.
3rd Mix Pure Water
16 kg liquid
Part b.
Result is same. Can also be done graphically.
Part c.
Countercurrent. Easiest solution approach is to use Kremser equation.
x N x *N
1 m Ov U
N 1
*
x 0 x N 1 m Ov U
368
External M.B.
N
3, x 0
xN
x0
x0U
y N 1Ov
y1
14.D7.
0.05, m 1, Ov
1
30 6
1
30 6
U x0
(was 13D27 in 2nd ed.)
Operating Eq.:
0.05 0.00641
4
xNU
xN
U
Ov
O
xj
yN
1
m
0
0.0003205
y1Ov
6 0.05 0.0003205 30
xj
Equilibrium:
yj
6, x *N
30, U
y j,in
U
O
xj
0.009936
y j wt. fractions
1
Basis 1000 cc wet sand.
U
.4
vol water
1000 cm 3 wet sand
vol sand wet
.4
O = 0.2 kg. Thus, each operating line has slope
Each op line goes through pt.
y j,in , x j
x0
0.035, y N,in
yN
xN
0.002, yS,in
y N , y 2,in
1,in
.2
1.0 g
kg
cc
1000 g
0.4 kg
2.
1
yN
2,in
0
y N 1 , y1,in
yN
2
Start at stage N where x N = 0.002. Find y N then work backwards to stage N-2. This
gives inlets for first 3 stages so can then work forward (see Figure). Note: that stages 5 and
N-2 are not connected. 8 stages gives more than enough separation, but 7 is not enough.
369
14.D8.
(was 13D28 in 2nd ed.)
Use Kremser equation
Fsolv Fsolid .95, y mx is equilibrium with m = 1.18, and N = 11.
Recovery is 1 x N
x0 .
Eq. (12-31) becomes x *N
m Fsolv
yN
*
N
*
N
1
xN
x
xN
x0
x
x0
0 .
m
m Fsolv
Fsolid
1
1
xN
1.18 .95 1.121. Then
Fsolid
N 1
m Fsolv
Fsolid
1 1.121
x0
1
12
1.121
0.041
Thus Recovery = 0.959
14.D.9. New problem in 3rd Edition. Assume FSolid and Fsolvent are constant despite removal of sugar from solid.
FSolid
FSolid
xF
Fsolv
Eq. (13-21) becomes x
a.
Fsolv
1.0, x F
3.0,
0.055, y solv,IN
y solv ,IN
mE
FSolid Fsolv
13
0.055
1
1.18
0.01211 , y
3
3
b. x = 0.004. Solve for Fsolv .
xm E
Fsolv
Fsolv
FSolid
mE x
L Slurry stream
0.055 0.004
1.0
ySolv,IN
14.D10. (was 13D30 in 2nd ed.)
1.18 .004
G H 2 stream
120 lb h
x
1 x
Yin
G Yin
X out
y
Y
lb CH 4
lb H 2
Yout
120
10.805 kg
CONSTANT
CONSTANT
,
100
0
100 lb h of H 2
Operating Line. Must work in weight ratios. Y
x
0.0143 wt frac.
x
x
mE x
1.18 0.01211
y solv,IN
xF
xF
1.18,
FSolid Fsolv
x
FSolid
0, m E
1 y
in
in
,
30
100
X in
L
G
X
x in
1 x in
0.30, Yout
L
G
X in
Yout
0
lb CH 4
lb H 2
out
out
.05
.95
.0527
L X out
0.30 0.0527
0.206 , x out
X
.206
1 X
1.206
0.171
370
Operating line becomes,
L
Y
X Yout where
G
Equilibrium Curve:
L
120
G
100
y = 1.2 x becomes
x
0
.05
.10
.15
.20
.25
Y
Y 1
1.2
X
X 1
→ Y
1.2 X
1 .2 X
Plot Y vs X
X
Y
0
0
.0526 .0038
.1111 .1364
.1765 .2195
.2500 .3158
.3333 .4286
See Figure for Plot. Need 5 1/8 stages.
14.D.11. New problem in 3rd Edition. 10,000 kg h wet solids,
1
frac vol dry solids.
Basis 1 m 3 wet solids :
Weight liquid + weight solids
1.20 and goes through X in , Yout .
1.0
frac. vol. liquid ,
1000 kg m3 1.0 1
1500 kg m 3
0.4
400 kg
Thus
400
1300
900 kg 1300 kg total m 3 wet solids.
of weight is underflow liquid, U
14.D12. (was 13D32 in 2nd ed.)
Fsolv Fsolid
400
1300
10, 000
kg
h
3076.9 .
1.36
371
Op. Eq.:
Fsolid
y
Fsolv
x
Fsolid
y1
Fsolv
Where y and x are kg m 3 . y
xF
x0
m E x is equilibrium.
x 0 , x N 1 .975 x F .025 x 0 , y N 1 0, x *N 0, N 5, Fsolv Fsolid
Can use any of Kremser equations such as Eq. (12-31).
m Fsolv
1
*
xN xN
Fsolid
1 1.36 m
0.025
N 1
6
*
x0 xN
1 1.36 m
m Fsolv
1Fsolid
1.36
Which becomes: 0.1582 m 6 1.36 m 0.975 0 Find m = 1.313
1 1.313 1.36
.025
0.025005 which is OK.
Check:
6
1 1.313 1.36
14.D13. (was 13D33 in 2nd ed.)
a)
x
Use Eq. (13-21),
R̂ Sˆ 10 12.5
R̂ Sˆ x 0
0.8, m E
m
1.18
y in
Rˆ Sˆ
g L in liqd
, x
g L in solid
Frac. Rec. 1 0.404040 0.5959596
x t ,final
Sˆ
1
n
b) Eq. (13-29b)
mE
x t ,feed
Rˆ
x t,final
x F exp
, equil. y
m E x, y in
0.8 x F
0
1.18 0.8
0.8
1.98
0
xF
0.4040 x F
0.228779 x F , Frac Rec = 1 – 0.228779 = 0.7712
1.25 1.18
14.D14. (was 13D34 in 2nd ed.)
BaSO 4 coal BaS 2 CO 2
Equil: Soln conc in underflow = soln conc in overflow. Thus really washing
Equil : y x, m 1, b 0
U
350
O
2075
kg
h
in sol.
kg
h
, y in
Eq. (12-29)
14.D.15.
1.5
kg solution
kg insoluble solid
0.0, x *N
N
0, y1
n
xN
U0 x0
525 kg soln., x in
xN
O
x *N
x0
n L mV
525
2075
x *0
0.20, x out
0.2 0.00001
0.00001
0.0506, x *0
n 0.00001 .2 .0506
n 525 1.0 2075
New problem in 3rd Edition. With 1000 kg/h dry solids U 1.5 1000
0.0506
6.99 or 7.0
1500 kg h
a) Can use Kremser eq. with large N to find Ov Min or a sketch
372
y1*
Equilibrium is y
0
y1*
U
y
yN
x
Ov
U
0
0
b. Ov 1.2 Ov Min
U
1500
Ov
1782
Kremser:
Eq. (12-28)
x0
Min
x0
xN
Min
1 .99 .15
0.15
xN
0.15 0.0015
1500
Ov Min
.15
0
10101
1.0101
1485
0.0015
1782
0.84175
y
y
V
Ov
x
x
L
U
xN
0.0015, x *N
n
0, x 0
.15, m 1, U Ov
x0
xN
U
m Ov
1
N
n
x *N
x *N
0.84175
U
m Ov
m
U Ov
0.15 0
.84175
.0015 0
2.81
N
16.33
1
.17227
n
.84175
In theory, can use McCabe-Thiele, but it is difficult to accurately step off this large number of
stages.
U
1500
c.
Ov 2000,
.75
m 1
Ov 2000
n 1 .75 100 .75
N
11.29
1
n
.75
n 1 .84175
N act
15
E overall
N eq
11.29
N sub actual
15
0.753
For m E use N = 15 and change mE with same equation
n
N
1
.75
mE
n
100
.75
mE
mE
.75
373
Vary mE until N = 15. m E .911
On a McCabe-Thiele diagram this is trial and error. Kremser is much easier.
14.D.16. New problem in 3rd Edition. Part a. U 2 kg, O 2 kg, x IN 0.06, y IN 0
Solution (translation of Eq. (13-21)) is
U
x
x IN y IN
1 U O
1 .06 0 2 .03
O
Part b. Want x 0.005 O is unknown, x IN 0.06, y N 0, U 2 Solve for O
x
O
U
U
x
O
O
x IN
y IN ,
0.06 0.005
2
O
x
y IN
U
x IN
O
x
O
14.D.17. New problem in 3rd Edition. K = 1 Eq (13–28) becomes
O
x t ,final
x t ,feed exp
Part b.
U
2, U
x t,final
O
14.D18.
O
U
2, x t,feed
O
Part c.
2, x t,feed
0.06 e
x IN
x
x
y IN
22 kg water
0.005 0
Part a.
U
U
n x t ,final x t ,feed
0.06
1
0.02207
0.06, x t,final
0.005
U n x t ,final x t ,feed
2 n
0.005
0.06
4.97 kg
x in Part a.
O normal batch in Part b.
One equilibrium stage. F 1000, x A N+1
E 0 y A,0
.2, S
662, y AS
y DS
0
F x A,N+1
0.12 (same as Example 14-2)
E0 F
Plot M. By trial and error find tie line through M (Final result shown in Figure).
y A1 .238, y D1 0; x A1 .078, x D1 .656
x A,M
Flow rates: Diluent balance:
R1x D1
R1
F x D,N+1 x D1
E1
M R1
F x D,N+1
1219.5
1662 1219.5
442.5
374
14.D19.
This problem is essentially a repeat of Example 14-2, except using exactly 3 stages.
Clearly, x A1 0.04 since now have more stages. F, E 0 and M are unchanged. Problem
is trial-and-error. Guess location of R 1 . Find E N and ∆. Step off 3 stages and see if have correct location of E N .
x A1
14.D20.
0.026 and y A3
The third and final trial is shown in the figure.
0.38.
Although this is leaching, this cross-flow problem is very similar to cross-flow extraction.
We can derive
R j 1 x A j 1 E j,in y A j,in
x A Mj
R j 1 E j,in
M
Stage 1:
Rj
R0
1
E j,in where R j
1000, E1,in
M j x A Mj
421, x A0
xAj
yA j
yA j
.2 y a1,in
0 , x AM1
200 1421 .1407
Find M on line SR 0 at x AM1 (see Figure). By trial-and-error find tie line through M.
375
This gives E1 and R 1. Find y A1
R1
Stage 2: x A M 2
y A2
.18, x A2
R2
Stage 3: x A M 3
R3
.35, x A1
1421 .1407 .35
0
0.085
1254.9 421
.058, from tie line , M 2
1675.9 0.085 .18
.058 .18
1305 .058
1421
1254.9
.113 .35
1254.9 .113
.113, M1
0
1726
1675.9
1305.0
0.044 , y A,3
1726 0.044 .09
.03 .09
14.D21. a. Basis 1 kg mix in underflow: x NaC values
.09, x A3
.03, M3
1726
1323.3 kg/h
0.8 1.0
0.2 yNaC
crystals
Since crystals are pure NaCℓ, NaOH is in liquid only. Since 20% of the underflow is liquid,
x NaOH 0.2 y NaOH . Generate equilibrium table.
376
x NaOH
Soln (y)
Mass frac NaOH
0
0.004
0.008
0.012
0.016
0.020
0.024
0.028
0.032
0.036
0
.02
.04
.06
.08
.10
.12
.14
.16
.18
y NaC
x NaC
.270
.253
.236
.219
.203
.187
.171
.156
.141
.126
.854
.8506
.8472
.8438
.8406
.8374
.8342
.8312
.8282
.8252
Feed is 45 wt% NaCℓ crystals. x values: NaCℓ (soln) = 0.5193, NaOH (soln) = 0.099, water 1-0.51930.099 = 0.3817. Since feed is 55% liquid,
x F,NaOH 0.55 y NaOH 0.099 y NaOH 0.099 0.55 0.18
,
y NaC 0.126
From the equilibrium data
F = 100, S = 20, Plot F & S and find M.
FM
20
,
SM 100 Tie line through M gives E & R.
E RM
1.119
R EM
(measured on figure)
E R 120 1.119 R R 120
R 56.63 kg/min, E 63.37 kg/min
R : Raffinate
0.833
E : Extract y NaC
x NaC , 0.026
0.16, y NaOH
x NaOH
0.135
The underflow is z wt frac crystals (Pure NaCℓ) + (1-z) wt frac solution
y NaC 0.16 is soln in equil
z 1.0
Thus,
1 z 0.16
z
0.333 0.16
0.84
was 80% solids in problem statement.
c.
Same M. Plot
R1
draw line
R1
0.833
M to
EN
EN
R1
80.1% OK
.
2 stages more than sufficient
120
1.137 R 1
EN
R 1M
103.5
R1
ENM
91.0
R1
120
1.137
377
R1
56.14
R1 : x1,NaC
E N : y NaC
E
63.86
kg/min, N
kg/min
0.845, x1,NaOH 0.01
0.152 y NaOH
0.147
378
379
14.E1a.
This is difficult part – converting data
Basis 1 lb oil-free solids
y oil
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.35
0.3
0.28
0
0.1
0.2
0.3
0.4
0.5
0.6
0.65
0.70
0.72
Note:
ysolids
1.0
x solids
z
ysolvent
0.20
.242
.283
.339
0.405
0.489
0.600
0.672
0.765
0.810
1 z
0.830
0.80515
0.7794
0.74683
0.71174
0.67159
0.625
0.598086
0.56657
0.552486
y oil z
x oil
1 z
0
0.01948
0.044115
0.07595
0.1153
0.16420
0.2250
0.26124
0.303399
0.3222
0 for all streams, Z = lb solution/lb oil free solids.
Plot data on triangular diagram. See Figure 14.E1a, b, c, d, e.
b&c. F + S = M1 = 1500
F x oil,F
S yoil,S
1000
M1x oil,M , x oil,M1
0.252
1500
0.168
See Figure 14.E1a, b, c, d, e.
Check: Lever Arm
Extract E1 ,
yoil,1
Mass Balances:
M 1S
F
2
M 1F
S
1
0.34; Raffinate: x oil,1
0.092 and x solids,1
1500
0.34 E1 +0.922 R 1
R1
E1
Extract:
MB:
R 1 , 252
1040.3,
Finish step c) Stage 2: R1 S2
x oil,M 2
. Find tie line through M1.
M2
E1
0.730
459.7 lb
1540.3
, R1 0.092
M2 xoil,M
0.062 . Plot M 2 and find tie line through M 2 .
yoil
2
1540.3
0.115; Raffinate: x oil,2
E2
R 2 , 95.7
0.025 and x solids,2
0.115 E 2
0.80 .
0.025 R 2
R 2 904.8 lb, E 2 635.5 lb
d & e – Same answer as b & c but R & E are flowrates.
f.
See Figure 14.E1f. 3 stages is more than enough. Need ~ 2
1
3
equil stages.
380
Lines E N R N
1
and E 0 R 1 intersect at .
381
382
14.E.2. New problem in 3rd Edition. Converting data is the difficult part, but is obviously identical to
Problem 14.E.1.
Basis 1 kg oil-free solids
x solids
y oil
ysolvent
z
0.20
1.0
x oil
1 z
0.830
y oil z
1 z
0
1.0
0.1
0.9
.242
0.80515
0.01948
0.2
0.8
.283
0.7794
0.044115
0.3
0.7
.339
0.74683
0.07595
0.4
0.6
0.405
0.71174
0.1153
0.5
0.5
0.489
0.67159
0.16420
0.6
0.4
0.600
0.625
0.2250
0.65
0.35
0.672
0.598086
0.26124
0.70
0.3
0.765
0.56657
0.303399
0.72
0.28
0.810
0.552486
0.3222
Approximate solution, use Eq. (13-29a) Oil balance:
S
Rt
0
x t ,final
x c ,feed
dx t
y
S = Mass Solvent,
R t Mass raffinate (solids + solute)
x = Mass frac. solute (oil) in raffinate
y = Mass frac. solute (oil) in raffinate in extract (solvent)
a) M is now at saturated raffinate curve. x oil,M
0.21, x solids,M
0.63
Mass balance F + S = M
Solids .748F + (0) (S) = 0.63M
M
0.748
F 1187.3 kg R initial
0.63
S 187.3 kg
b) Now mixing is from S to a point on raffinate curve.
From equilibrium curve in solution to 14.E.1.
383
x oil
y oil
0.21
0.1625
0.115
0.0675
0.02
1 y oil
.54
.498
.40
.28
0.1
Insoluble Solids M.B.
Initial 0.748, F = 100, Final 0.81,
1.852
2.0080
2.50
3.57
10.0
R t final
.81 R t final 748
R tfinal 923.5 kg
Raffinate is 0.81 solids, 0.02 oil and 0.17 solvent
Solvent remaining in raffinate is 0.17 923.5 157.0 kg
Needs to be recovered by evaporation.
Do Simpson’s rule in 2 parts.
0.21 0.115
1.852 4 2.008 2.50
6
1
0.115 0.02
6
2
Sadded
2.50 4 3.57
.1961
0.4241
10
0.6202
0.6202 R t , but what is R t ?
Eq. (13-29a) assumes R t
Const.
Use average value of R t .
R t ,avg
or
Sadded
Stotal
1
R t init R t ,final
1187.3 923.5 1055.4
2
0.6202 R t,avg
0.6202 1055.4 654.6
Initial addition + Sadded
Extract amt S
Stotal
Sremain in raffinate
Oil in extract
x F,0.1 F x final,oil R t,final
187.3 654.6
841.9 157.0
841.9
684.9 by solvent
0.252 1000
0.02 923.5
233.5
Total wt extract 684.9 233.5 918.4
yoil 233.5 918.4 0.254
ysolvent
0.746
14.E.3. New problem in 3rd Edition. Solid Matrix is insoluble. Solids = (.748) 1000 = 748 kg. R t not
Constant, but Solid is.
Solids
Rt
x Solids
ydS
d R xA
Solids d
xA
x Solids
384
x final ,A x Solids
S
Solids
d x A x Solids
y
x A ,raf ,init
x Solids ,raf ,init
Changes limits integration.
x oil 0.21, x Solids
x oil
0.63, x oil x Solids
0.115, x Solids
0.21 0.63 .3333
0.705, x oil x Solids
0.115 .705
0.163
x oil 0.02, x Solids 0.81, x oil x Solids 0.02 0.81 0.0247
Numbers for use in Simpson’s rule are from Solution 14.E.2.
.3333 0.163
6
1
0.163 0.0247
6
2
Sadded
Stotal
1.852 4 2.008
2.50
2.50 4 3.57
Solids total integral
10
0.3515
0.6173
Total 0.9688
748 0.9688 724.6 kg
initial added 187.3 724.6
911.9 kg
Extract Amount Solvent
Stotal Sraf ,final 911.9 157
Oil in extract = 0.252 (1000) – 0.02 (923.5) = 233.5
Total weight extract 754.9 233.5 988.4
754.9 kg
wt frac solvent = 0.764, wt frac oil = 0.236
385
Chapter 15 Solution Manual
Since this is a new chapter, all problems are new.
A. Discussion Problems.
15.A1. The mole fraction water is constant but since the temperature within the vessel varies the total
molar density Cm varies and the water concentration = Cw = ywCm also varies. Thus, Eq. (1510a) incorrectly predicts molecular diffusion. Equation (15-10b) predicts no molecular
diffusion because dyw/dz = 0.
B. Generation of Alternatives.
15.B1. For example, one could operate with both inflow and outflow at the bottom of the tube. If flow is
controlled with a constant head tank, the height of liquid in the tube will be very close to
constant.
C. Derivations.
15.C4. Substitute in q = (μ Re)/(4ρ) into Eq. (15-35d) and obtain δ = [(3μ2Re)/(4ρ2g)]1/3.
15.C5. Start with Eq. 15-52a), set vB=0 and solve for yAvA. Then NA = Cm yAvA. Substitute in the
expression for yAvA and Eq. (15-52e) for JA. This gives the desired result.
15.C6. This problem is included to show that one can derive the expressions in books. There is a lot of
algebra, but the derivation works. First, can expand the derivative,
AB 2 (1 2 x1
1
x1
x
[B
(A
x12 )
B ) x1 ]2
Then take the derivative and expand all terms. The denominator becomes
[ A ( A B) x1 ]3 [ Bx2 Ax1 ]3 and the numerator simplifies to 2 A2 B 2 x2 . Multiply by x1. Q.E.D.
*
15.C7. With CMO and y as mole fraction, vmol
y Av A yB vB y Av A (1 y A )vB 0 . Since NA = -NB,
CAvA = -CBvB and for an ideal gas Ci = yi Cm. The total molar concentration Cm is constant.
Then, vA = -(1-yA)vB/yA (Eq. A)
In terms of mass fractions yA =(yA,mass/MWA)/[yA,mass/MWA + (1 – yA,mass)/MWB]. (Eq. B)
Substitute Eq. B into Eq. A and simplify.
(1 y A, mass ) / MWB
vA
vB (Eq. C)
y A, mass / MWA
*
Then in mass terms vmass
*
vmass
y A,mass vA
yB ,mass vB which after substituting in Eq. C and simplifying
(1 y A,mass ) ( MWA / MWB )(1 y A,mass ) vB . (Eq. D)
*
If MWA = MWB, vmass
= 0. We can write
vB = NBCB = NByBCm = NBCm(1 – yA) (Eq. E)
where the y are mole fractions. Substituting Eq. B into Eq. E and then substituting this into Eq. D,
we obtain
1 y A , mass
MW A
Cm N B
(1 y A , mass ) (1 y A , mass )
MW B
MW B
*
vmass
(Eq. F)
y A , mass / MW A (1 y A , mass ) / MW B
*
Since yA,mass varies throughout the distillation, vmass
is different for each stage.
386
D. Problems.
15.D1. Dprop,water = 0.87E-9 m2/s. Eq. (15-9), J A , z
dC A
( D AB / L )(C A , L C A ,0 ) . If C A,0 = 1.2
dz
kg/m3 is the known value, C A, L can be larger or smaller than C A,0 . For smaller C A, L we have
D AB
C A, L =1.2 – (0.2E-5)(0.0001)/0.87E-9 = 0.9701
If it is larger value, then C A, L =1.2 +(0.2E-5)(0.0001)/0.87E-9 = 1.430
15.D2. Taking the ratio of Eq. (15-23c) at the unknown T and at T =298.16,
exp[ Eo / (TR )]
= 1.52E-09 for T = 335.18K. Flux
D (T ) D (298.16)
exp[ Eo / (298.16 R )]
J A, z
D AB
dC A
dz
( D AB / L )(C A , L
C A ,0 )
(1.52 10
9
/ 0.0001)(0.9701 1.2)
0.35 10
The temperature can be found with Goal Seek from a spread sheet, but one has to trick Goal Seek
into working. Multiply the desired and the calculated fluxes by 1,000,000 and have Goal Seek
match these two values.
15.D3.a. 0.181cm2/s, b. 0.198 cm2/s, c. 0.0725 cm2/s, d. 0.198 cm2/s
15.D4. a. 0.0875 cm2/s, b. 0.096 cm2/s, c. 0.175 cm2/s, d. 0.096 cm2/s.
15.D5. Use Arrhenius form in Eq. (15-23c) but for mole fraction 0.0332 instead of infinite dilution. Write
the equation for both known temperatures and divide one of these equations by the other. The
constant Do divides out. Take the natural log of both sides and solve for E/R. The result is
E/R
ln
D AB (T1 )
D AB (T2 )
/
1
1
T2
T1
The constant Do can be found from the known conditions at T 1
Do DAB (T1 ) / exp[ E / ( RT1 )]
Or from the known conditions at T 2. The results are: E/R = 1348.3, E = 2677.6 cal/mol, DAB
(x=0.0332, T=300) = 1.313×10-9m2/s.
15.D6. Same equations as in 15.D5. At 298.16 K for the infinite dilution value set C sucrose = 0. Final
results are Eo = 4953.8 cal/mol, DAB(infinite dilution, T = 320K) = 0.925×10-9m2/s.
15.D7. For an ideal solution the term in brackets in Eq. (15-22) is equal to 1.0. Write this equation for
two of the xA values with the corresponding diffusivities (e.g., x = 0.0332 with D = 1.007×10-9
m2/s and x = 0.7617 with D = 1.226×10-9m2/s). Then have two equations with the two unknowns:
o
o
o
o
and DBA
. Solve for the two unknowns. Results are DAB
= 0.998×10-9 m2/s and DBA
=
DAB
-9 2
1.308×10 m /s. Check results with the other two mole fractions and find that the fit is good.
15.D8. From http://www.engineeringtoolbox.com/ the density of methanol at bp is 750.5 kg/m3 (used a
linear interpolation), which means partial molar volume = 1/(density/MW)= 0.0426 kg/m3.
Viscosity of water is 1.0 cp = 0.001 Pa s = 0.001 kg/(m·∙s).
a. With φB = 2.26, DAB = 1.43×10-9 m2/s.
b. With φB = 2.26, DAB = 1.56×10-9 m2/s.
387
5
15.D9. Combining Eqs. (15-35b) (15-35d), vvertical ,max,liq
0.5 9 gq 2 /
1/3
Assume that the bulk is pure
water with infinite dilution of ethanol. From Perry’s Chemical Engineer’s Handbook, 8th edition,
(p. 2-305) at 1.0 bar (0.1 MPa) water has ρW,m,liq = 55.212 kmol/m3 →ρW,liq=994.64 kg/m3 and
ρW,m,vapor = 0.032769kmol/m3 → ρW,vapor = 0.5903 kg/m3. The water boils at 372.76K. At this
temperature, from p. 2-432, the viscosity of liquid water in Pa·∙s is,
exp[ 52,843 3703.6 / T 5.866 ln T (5.879 10 29 )T 10 ] 2.807 10 4 Pa s
W ,liq
The viscosity of the vapor at 372.76K is (p. 2-426)
(1.7096 10 8 )T 1.1146 1.2561 10 5 Pa s or kg/(m·∙s).
W , vapor
Now we can calculate the vertical velocity of the liquid water for q = 7.5×10-6m2/s (remember to use
liquid properties).
vvertical ,max,liq
2
0.5 9 gq /
1/3
0.5
9(994.64)(9.81)(7.5 E
6) 2
1/3
0.0002807
0.130 m / s
A check of the units show they work. The modified Reynolds number (using gas properties) is,
Re
d tube ( v gas
vliq , y ,max )
(0.10)(0.5903)(0.81 0.130)
The gas phase Schmidt number is Sc gas
1.256 10
/
D EW
5
3195.6
The viscosity and density were found earlier.
gas
The diffusivity of ethanol and water in the vapor phase at 372.76K and 1.0 bar = 0.98717 atm can be
estimated from the Chapman-Enskog theory with the parameters in Table 15-2. This value of DEW =
1.658×10-5 m2/s. Then Scgas = 1.283. Since both Re and Scgas are in the range for Eq. (15-47a), the
modified Sherwood number is,
k p d tube ( pB )lm
0.0328(Re ) 0.77 Scgas 0.33
DAB ptot
0.0328(3195.6).77 (1.283).33
17.79
15.D10. From the Chapman-Enskog theory DNH3-air = 2.05×10-5m2/s at 318.16K and p = 1.2 atm.
Problem 15.D10a, 3rd ed.
MW A
28.9 MW B
17 const
1.86E-07
T
318.16 p
1.2 T^3/2
5675.033
sigma A
3.711 sigma B
2.9 sigma AB
3.3055
eos A/kB
78.6 eps B/kB
558.3 eps AB/kB 209.4812
kT/EpsAB
1.5188 Col integ
1.197 Linear interpolation table 15-2
D AB
2.05E-05
D, cm^2/s 2.05E-01
The concentration at z = L is CNH3 (L) = CNH3 (z = 0) + JNH3L/DNH3-air. Results are 0.0002483 kmol/m3
and 0.0002117 kmol/m3.
15D11. D = JL/ΔC = 4.114×10-5m2/s. Set up spreadsheet to obtain this value. Since the collision integral
was entered manually, had to do several iterations. After 6 iterations T = 396.2K (see
spreadsheet, and note that collision integral does not exactly match the value of kT/εAB.
388
Problem 15.D11, 3rd ed.
MW A
28.9 MW B
T
396.1642 p
sigma A
3.711 sigma B
eos A/kB
78.6 eps B/kB
kT/EpsAB 1.891168 Col integ
D AB
4.11E-05
D desired 4.11E-05 chkB7-B8
chk x E5
Problem
MW A
T
sigma A
eos A/kB
kT/EpsAB
D AB
D desired
17 const
1.86E-07
0.9 T^3/2
7885.202
2.9 sigma AB
3.3055
558.3 eps AB/kB 209.4812
1.1069 Linear interpolation table 15-2
1.90E-10
1.90E-05 Goal seek to zero changing B3
15.D11, 3rd ed.
28.9
396.164199034186
3.711
78.6
=B3/F5
=F2*F3*SQRT(1/B2+1/D2)/(D3*F4*F4*D6)
0.00004114
MW B
p
sigma B
eps B/kB
Col integ
17
0.9
2.9
558.3
1.1069
const
T^3/2
sigma AB
eps AB/kB
Linear interpolation
in Table 15-2
0.0000001858
=B3*SQRT(B3)
=0.5*(B4+D4)
=SQRT(B5*D5)
chkB7-B8 =B7-B8
chk x E5 =100000*D8 Goal seek to zero
changing B3
15.D12*. From http://www.engineeringtoolbox.com/ viscosity is 1.0 cp = 0.001 Pa·∙s = 0.001 kg/(m·∙s).
At 298.16 K, DAB = 1.114 m2/s. Density water = 998.3 kg/m3, viscosity water = 0.001 kg/(ms).
Calculate δ = 0.000115282 m, vy,avg = 0.04338 m/s, Re = 19.966. This is a long residence time
with Re< 20 so there are no ripples. Shavg = 3.41 and kavg = 3.295E-05 m/s, and 0.000168 kg/s
carbon dioxide are absorbed.
15.D13. From http://www.engineeringtoolbox.com/ viscosity is 1.0 cp = 0.001 Pa·∙s = 0.001 kg/(m·∙s). At
298.16 K, DAB = 1.114 m2/s. Density water = 998.3 kg/m3, viscosity water = 0.001 kg/(m·∙s).
Calculate δ = 0.0001663 m, vy,avg = 0.090241 m/s, Re = 59.898. This is a long residence time,
laminar flow, with no surfactant so there are ripples. Shavg = 5.8 and kavg = 3.89E-05 m/s, and
0.000198 kg/s carbon dioxide are absorbed
15.D14. From http://www.engineeringtoolbox.com/ viscosity is 1.0 cp = 0.001 Pa·∙s = 0.001 kg/(m·∙s). At
298.16 K, DAB = 1.114 m2/s. Density water = 998.3 kg/m3, viscosity water = 0.001 kg/(m·∙s).
Calculate δ = 0.0007717 m, vy,avg = 1.9441 m/s, Re = 5989.8. This is turbulent flow with 1300 <
Re < 8300. Scliq = 899.2, Shavg = 255.5 and kavg = 0.0003689 m/s, and 0.00188 kg/s carbon
dioxide are absorbed
15.D15. From http://www.engineeringtoolbox.com/ viscosity is 1.0 cp = 0.001 Pa s = 0.001 kg/(m·∙s). At
298.16 K, DAB = 1.114 m2/s. Density water = 998.3 kg/m3, viscosity water = 0.001 kg/(m·∙s).
Calculate δ = 0.000115282 m, vy,avg = 0.04338 m/s, Re = 19.966. This is a short residence time
with Re< 20 so there are no ripples. Shavg = 9.942 and kavg = 9.61E-05 m/s, 7.851E-09 kg/s
carbon dioxide are absorbed.
15.D16. From http://www.engineeringtoolbox.com/ viscosity is 1.0 cp = 0.001 Pa·∙s = 0.001 kg/(m·∙s). At
298.16 K, DAB = 1.114 m2/s. Density water = 998.3 kg/m3, viscosity water = 0.001 kg/(m·∙s).
389
Calculate δ = 0.0001663 m, vy,avg = 0.090241 m/s, Re = 59.898. This is a long residence time,
laminar flow, with surfactant so there are no ripples. Sh avg = 3.41 and kavg = 2.28E-05 m/s, and
0.0001165 kg/s carbon dioxide are absorbed.
15.D17. Used a spreadsheet set up to solve Example 15-6. For δ = 0.001 meter one obtains xNH3 =
0.04988, yNH3,surface = .21593, Nwater = 0.5393, NNH3 = 0.0228307. The concentrations are the same
as in Example 15-6, but the fluxes are 10× larger.
15.D18. Part a. For two part solution need values at xE = 0.25 and 0.35. The average molecular weights
are calculated as in Example 15-5, and are used to determine the average molar densities. The
Fickian diffusivities are estimated by interpolating between values given in the Table in Example
15-5. The activity coefficients are determined in the same way as in Example 15-5. Then the
Maxwell-Stefan diffusivities are found by the same method. The values are listed below
DEW, m2/s
γE
,kmol/m3
DEW , m2/s
XE = 0.25
25.0
36.28
0.633×10-9
1.9028
1.495×10-9
-9
XE = 0.35
27.8
31.62
0.625×10
1.5553
1.609×10-9
Write Eq. (15-61c) for both intervals. For Δz from xE = 0.2 to 0.3 we obtain (values at xE = 0.2 and 0.3
are in Example 15-5),
MWavg
zN E
m
36.28(1.495 10 9 )[1.7083(0.3) 2.1582(0.2)]
9.3445 10
9
1.9028(0.25)
From xE = 0.3 to 0.4 (interval is over length δ- Δz) we obtain,
31.62(1.609 10 9 )[1.4338(0.4) 1.7083(0.3)]
(0.00068
z) N E
5.7027 10
1.5553(0.35)
Adding the two equations to remove the unknown Δz and then solving for NE and Δz,, we obtain
NE = -2.128×10-5kmol/s and Δz = 0.0004223m
9
Part b. Since the interval Δz is greater than the interval δ – Δz = 0.0002577m, we subdivide the interval
from xE = 0.2 to 0.3 into 2 parts. The values needed are given below.
MWavg
XE = 0.225
XE = 0.275
,kmol/m3
37.625
34.99
z1 N E
m
24.3
25.7
Equation (15-61c) is now written 3 times:
DEW, m2/s
γE
0.659×10-9
0.624×10-9
5.5371 10
2.01976
1.79959
3.9846 10
z2 N E
DEW , m2/s
1.482×10-9
1.532×10-9
9
9
(
z1
z2 ) N E
5.7027 10 9
and solved for the 3 unknowns Δz1, Δz2, and NE. Obtain NE = -2.2389×10-5kmol/s, Δz1 = , 0.0002473, and
Δz2 = 0.0001780m.
15.D19 (Optional, Unsteady diffusion) At the average C = 0.001 mol/L Dsucrose
Equation becomes
CA
C A,0
1 erf
0.5228 10
5
cm 2 / s .
z
4(0.5228 10 5 )t
Numerical values of C A / C A,0 are easily obtained with a spreadsheet or with the use of Table 17-7.
390
z, cm
0
0.01
0.05
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.2
1.4
1.6
1.8
2.0
3.0
3.5
3.56
4.00
5.0
t = 1000 s
1
0.9221
0.6249
0.3281
0.0505
0.00335
9.16E-05
1.009E-06
t = 10000 s
1
0.9753
0.8771
0.7571
0.5362
0.3535
0.2161
0.1220
0.6352
0.0304
0.0134
0.00538
0.00198
0.000206
1.49E-05
7.49E-07
7.61E-12
t = 100000 s
1
0.9922
0.9610
0.9221
0.8449
0.7692
0.6957
0.6249
0.5574
0.4936
0.4346
0.3788
0.3281
0.2406
0.1710
0.1177
0.0784
0.0505
0.00335
6.20E-04
4.99E-04
9.16E-05
1.01E-06
6.2E-10
Part b. C 1.0 10 6 when C / C0 5.0 10 4 , which for t = 100000 s occurs for a thickness of <3.56
cm (Goal Seek gives 3.559 cm). Thus, at this time a layer 3.56 cm or thicker appears to be
infinitely thick.
Part c. C 1.0 10 6 when C / C0 5.0 10 4 , which for =0.10 cm occurs at t = 78.938 s (done with
Goal Seek on spreadsheet).
H. Spreadsheet Problems
15H1. Let A = air, B = hydrogen, and C = ammonia. Then NC = -NA – NB. Substitute this expression
into Eqs. (15-65a, b)
m
yA
z
m
yB
z
yB
yC
yA
D AB
D AC
D AC
yB
yB
DBA
DBC
NA
NA
yA
yA
D AB
D AC
yA
yC
yB
DBA
DBC
DBC
NB
NB
Determine NB from the 1st equation and NA from the second.
391
m
NB
m
NA
yA
z
yB
z
yB
D AB
yC
D AC
yA
D AB
yA
D AC
yA
D BA
yC
D BC
yB
D BA
yB
D BC
yA
NA
D AC
yB
NB
D BC
Put these equations and the values for mole fractions at the boundaries, diffusivities, ρm, and Δz = δ into a spread sheet. Guess a value for NA,guess, calculate NB and NA,calc, and use Goal Seek to make
NA,guess - NA,calc = 0 by changing the value of N A,guess.
Results Nair = -6.209E-5, NH2 = 14.026E-5, and NNH3 = -7.817E-5 kmol/s. As expected hydrogen
diffuses in the positive direction and ammonia in the negative direction. The surprise is the
substantial negative diffusion rate of air. (Spreadsheet shown in 15.H4, but with different
numbers.)
15.H2. Used a spreadsheet set up to solve Example 15-6. For a bulk gas that is 40% air, 15 % NH3 and
45% water obtain xNH3 = 0.05596, yNH3,surface = .24225, Nwater = 0.032964, NNH3 = 0.001955 kmol/s
15.H3a. See solution to 15.H1 for procedure and 15.H4 for example spreadsheet.
Results: Nair = -1.87E-8, NH2 = 2.98E-7, NNH3 = -2.80E-7 kmol/s.
b. For ammonia Deff = 1.5656E-5 m2/s. Estimating dC/dz with the difference approximation for a very
dilute solution, N = J = -Deff ρm Δy/(Δz)= -(1.5656E-5)(0.08928 kmol/m3)(.002)/(.01m) = -2.80E7 kmol/s. Thus, this is accurate. For hydrogen and air Dair-H2 = 3.0550E-5 m2/s. Then
Nair = Jair = (3.0550E-5)(0.08928 kmol/m3)(-0.001)/(.01m) = 2.73E-7 kmol/s. The same value is
obtained for hydrogen. The hydrogen value is close, but the air value is not close. Conclusion:
Use the Maxwell-Stefan approach.
15.H4. See solution to 15.H1 for procedure. Results: Nair = -5.903E-5, NH2 = 14.069E-5, NNH3 = 8.166E-5 kmol/s. Note the substantial negative diffusion of air despite the zero “driving force.” The air is dragged along with the ammonia. The spreadsheet is given below (labeled as 15.D22),
first with the numbers, and then with the formulas.
392
HW 15-D22,
A=air, B=H2,
T
3rd Ed. SPE
C = NH3
273.000000000 p
D AB 1 atm
D AB
0.000061100 D AC 1 atm
0.000030550 D AC
NA guess
2.000000000
0.000019800 DBC 1 atm
0.000009900 DBC
0.000074800
0.000037400
-0.000059028
del z
0.010000000 ρ
yA z=0
yA z=δ
yA avg
ρΔyA/δz
0.520000000
0.520000000
0.520000000
0.000000000
NB
NA calc
chk NA-Nacalc
100000 chk
NC
0.000140693
-0.000059028
0.000000000
0.000000000
-0.000081665
y B z=0
yB z=δ
yB avg
ρΔ yB/δz
0.089278949
0.480000000 y C z=0
0.000000000 yC z=δ
0.240000000 yC avg
-4.285389534
0.000000000
0.480000000
0.240000000
kmol/s
kmol/s
Goal seek to zero
change B10
HW 15-D22,
A=air, B=H2,
T
3rd Ed. SPE
C = NH3
273
p
2
D AB 1 atm
D AB
0.0000611
=B7/D3
D AC 1 atm
D AC
0.0000198
=D7/D3
NA guess
-0.0000590279043468439
del z
0.01
ρ
=D3/(0.0820575*B3)
yA z=0
yA z=δ
yA avg
ρΔyA/δz
0.52
0.52
=(B14+B15)/2
=-D12*(B14-B15)/B12
y B z=0
yB z=δ
yB avg
ρΔ yB/δz
0.48
y C z=0
=B9*B11/D3
yC z=δ
=(D14+D15)/2
yC avg
=-D12*(D14-D15)/B12
NB
=(B17+(D16/B8+F16/D8+B16/D8)*B10)/(B16/B8-B16/D8)
NA calc
=(D17+(B16/B8+F16/F8+D16/F8)*B19)/(D16/B8-D16/F8)
chk NA-Nacalc =B20-B10
100000 chk
=100000*B21
NC
=-B19-B20
DBC 1 atm 0.0000748
DBC
=F7/D3
=1-B14-D14
=1-B15-D15
=(F14+F15)/2
kmol/s
kmol/s
Goal seek to zero
change B10
393
SPE 3rd Solution Manual Chapter 16
New Problems and new solutions are listed as new immediately after the solution number. These new
problems are: 16.A1, 16.A7, 16.A8, 16.C2 16C4, 16.C5, 16.D3, 16.D9, 16.D16 to 16.D22, 16.G116.G3, 16.H1-16.H2. Chapter 16 was chapter 15 in the 2nd edition. Problems from that edition
have the same problem number, but the chapter number is now 16 (e.g., problem 15.D6 is now
16.D6).
x
16.C3. (was problem 15C3 in the 2nd edition.) Equilibrium y
, Operating y = x,
1
1 x
y out
n OG
y in
dy
y
*
y
. Substitute in for y* and let x = y (total reflux operating line)
dy
y
1 y
n OG
1
y out
1
n OG
1
1
y y 1
y in
1
1
y out 1
n
y2 y2
1 y
y y
1
y
dy
1
n OG
dy
y out
y out
1 dy
y 1
y in
y in
1
y in
1 n
y out
1
y in
1
which becomes Eq. (16-81).
16.C4.
New problem in 3rd edition. With extract dispersed,
E MD
Since
y IN
y IN
y M,OUT
y IN
y*M,OUT
y M,OUT
0, E MD
y
*
M,OUT
Mixer mass balance with y IN
Solving for x M,OUT :
Then,
y*M ,OUT
E M ,D
0, Fx IN
F x IN
x M ,OUT
m
F x IN
m x M,OUT
S yM,OUT
F x M,OUT
S y M ,OUT
F
S y M ,OUT
F
y M ,OUT
y
where y*M,OUT
*
M ,OUT
y M ,OUT
m F x IN
S y M ,OUT
F
y M ,OUT
E M ,D m x IN
1
mS
E MD
F
395
External MB y IN
E S,D
0 F x IN
yS,IN
yS,OUT
yS,IN
*
S,OUT
y
S yS,OUT
Equil : y*S,OUT
Substituting: y*S,OUT
y S,IN
E S,D
y S,IN
Substitute in
y S,IN
y S,OUT
m
y S,OUT
S
m x IN
F
y S,OUT
y S,IN 1 E SD
1
E MD m x IN
mS
1
E MD
F
E MD
m x S,OUT
y S,OUT
S
y S,OUT
F
x IN
y M ,OUT
F x S,OUT
m E SD x IN
mS
E SD
F
and do some algebra to obtain,
mS
1
F
mS
1
E SD
F
E SD 1 E MD
m x IN
mS
E MD
F
1
The definition of the total stage efficiency is,
E total,D
x D IN
x D ,S,OUT
x D IN
*
D ,S,OUT
x
y*S,OUT
Equilibrium:
m
x IN
y IN
y S,OUT
y S,OUT
y IN
*
S,OUT
y *S,OUT
S
F
y S,OUT
E total,D
m x IN
y
with y IN
0
yS,OUT . Substitute into definition.
y S,OUT x IN
S
y S,OUT
F
m 1
S y S,OUT
F x IN
Which after substituting in yS,OUT and doing some algebra, becomes.
E MD
E total
1
m SE MD
F
1
E SD 1 E MD
m S E MD
F
mS
F
mS
1
F
E MD
E SD 1 E MD
mS
1
F
16.D1. (was problem 15.D1 in the 2nd edition) The corrected value of H G,E
1.41 ft is given in
Example 16-2. From the results of Examples 16-1 and 16-2 and from Eq. (16-38),
396
2.61
0.15
0.15
2.61
0.83 0.85 ft
2.2
2.2
mV
Eq. (16-27a)
H OG
H L H G where V L 8 5
L
The value of m (the slope of the equilibrium curve) varies throughout the enriching section.
From the McCabe-Thiele diagram used to prepare Figure 16-4A values of m were found from
y 0.442 y* .63 to y x D 0.8 y* 0.82 .
H L,E,cor
y
y*
m
H OG
y* - y
1
y* y
Arithmetic Average:
H L,E,Initial
0.442
0.63
0.441
2.01
0.5315
0.598
0.406
1.96
0.621
0.66
0.449
2.02
0.7105
.727
.5144
2.11
0.8
.822
.745
2.42
0.188
5.32
0.0665
15.04
0.039
25.641
0.0165
60.606
0.022
45.45
1
H OG
2.01 1.96 2.02 2.11 2.42
5
Geometric Average: H OG
2.01 1.96
2.02
15
2.11 2.42
2.10
2.10
No difference!
To find n OG do Simpson’s rule in 2 parts because of the unusual shape of 1 y*
n OG ,1
0.179
6
0.179
n OG ,2
6
5.32 4 15.04
25.641
25.641 4 60.606
y vs. y.
2.718
45.45
9.353
n OG n OG,1 n OG,2 12.072 , h E H OG n OG 25.35
This is reasonably close to the 26.1 ft estimated in Example 16-1.
16.D2. (was problem 15.D2 in the 2nd edition) a.
The physical properties and use of Figure 10-25
calculated in Example 16-2 are unchanged. Now F = 48.
G flood
2
141,
F 1
55, Dcol
12
48
14
F 2
1
20
G flood 2
F 1
Dia 1
b. In Eq. (16-37)
12
F 2
48
Dia 2
20
1.16
0.749 lb ft 2
4.68
5.83 ft
14
2 same .
Estimate
h p ~ 10 ft (we know it will be less than before), SC,V is unchanged, terms in
denominator are unchanged.
H G ,E 1
1
hp 1
10
2
hp 2
10
13
13
H G ,E 2
55
10
141
22
13
1.33
0.40 ft
397
1
In Eq. (16-38),
0.045 ,
2
0.07 , h p 1
10 , h p 2
22 .
Cf ,L , and SC,L unchanged.
H L,E 1
1
hp 1
2
hp 2
0.15
H L,E 2
0.045
10
0.07
22
16.D3. New problem in 3rd edition. In the enriching section,
HETP H OG ln(mV / L) / [(mV / L ) 1] and H OG
0.15
0.83
0.47 ft
H L mV / L H G
With H L 0.827, H G 1.33, m / ( L / V ) 0.63 / (5 / 8), H OG 2.16, and HETP = 2.15 (from
Example 16-2). With the same mass transfer coefficients, but m = 0.577,
H OG [0.577 / (5 / 8)]0.83 1.33 2.10 and HETP 2.10 ln(0.9232) / (.9232 1) 2.19 ft
A 24.4% increase in both mass transfer coefficients gives H L
HG
1.244(0.83) 1.033 and
1.244(1.33) 1.65 .
[0.63 / (5 / 8)]1.033 1.65 2.69 and
HETP 2.69 ln[0.63 / (5 / 8)] / [0.63 / (5 / 8) 1] 2.68 .
With the same mass transfer coefficients, but with m = 0.577, H OG
For m = 0.63, H OG
2.61 and HETP = 2.71.
A 24.4% decrease in both mass transfer coefficients gives:
For m = 0.63, H L 0.63, H G 1.01, H OG 1.65, HETP 1.64
For m = 0.577, H L
0.63, H G
1.01, H OG
1.59, HETP 1.65 .
Clearly, the variation in mass transfer coefficients results in a large range for HETP (from 1.64 to
2.69 feet for m = 0.63) while the small change in m had little effect. To be safe the larger value
of HETP = 2.69 would be used. This is a safety factor of 1.20. Note that Bolles and Fair (1982)
recommend a safety factor of up to 1.70.
16.D4. (was problem 15.D4 in the 2nd edition)
q
Feed line:
Top: y
L
V
x
.6,
q
.6
q-1
.4
1
L
V
Since we have total reboiler, ys,in
1.5 . Plot this and operating lines (see figure).
x D where
y intercept
Bottom goes through
y
x
0.04
xB
L
L D
0.9
V
1 L D
1.9
1
L
D
xD
0.474
0.484
0.04 .
398
dy
nG
For
L HG
V HL
enriching
0.474
y AI y A
from
2.568
V HL
From figure generate following table.
yA
Stripping: .04
.3225
.605
Enriching: .605
.7625
.92
Simpson’s rule, n G ,S
.315
6
.565
6
.605, y E,out
.92
33.33
1 2.26
n
slope
4.17
.8
yAI
yAI-yA 1/(yAi-yA)
.13 0.09
11.111
.46 .1375
7.2727
.63 .025
40.00
.62 .015
66.66
.80 .0375
26.66
.95 .03
33.333
16.D5. (was problem 15.D5 in the 2nd edition) a)
1
1.3
11.11 4 7.2727
66.66 4 26.66
Eq. (16-81), n OG
y E,in
section,
Eq.
(16-16)
draw
line
of
1.3
.770 to get y I and x I . For stripping section slope is
0.8
L HG
n G ,E
, where y S,out
7.55 , h strip
40
10.8 , h E
HG n G
Total Reflux. y out
.956 1 .65
.65 1 .956
n
H G n G,S
1.3 10.8
0.956, yin
9.8 ft.
14.1 ft
0.65
.65 1
.956 1
399
n OG
6
1.4904
4.0257
b) Finite reflux. Plot op. line. Find y & y* (see graph). Use Simpson’s rule in 2 parts.
y
y*
0.783
0.82225
0.8615
.90075
0.94
0.842
0.8795
.9125
.943
.973
y* y
0.059
0.05725
0.051
0.04225
0.033
4.0257, H OG
1
y* y
16.949
17.467
19.608
23.6686
30.303
n OG1
n OG 2
0.8615 0.783
6
0.94 0.8615
6
16.949 4 17.467
19.608 4 23.6686
19.608
30.303
1.3924
1.89166
n OG
3.2841
c) Changes in L/V in equation connecting HETP and H OG
400
401
16.D6. (was problem 15.D6 in the 2nd edition) a.
n OG
11.11 3.56 14.67
H OG h n OG 7.47 14.67 0.509 m
b. From McCabe-Thiele diagram we find the following
y
y*
y* - y
1/(y* - y)
0.016
.0267
0.017
93.46
0.066
0.1067
0.0407
24.57
0.116
0.1815
0.0655
15.27
.494
.623
.129
7.752
.872
.9201
0.0481
20.79
.922
.9523
.0303
33.00
.972
.9832
.0112
89.29
Do integration with Simpson’s rule in three parts.
.1
.756
n OG
93.46 4 24.57 15.27
15.27 7.752 4 20.79
6
6
.1
20.79 4 33.0 89.29 15.97
6
The difference is because of inaccuracies in Simpson’s rule.
16.D7. (was problem 15.D7 in the 2nd edition) Bottoms x A
xA
0.1 Distillate
.9
0.1 , equil. y
From equilibrium data in 4.D7. @ x A
y out
partial reboiler
xD
0.262
yin With total condenser,
0.9
yA x A
Find average
Bottom
1 yA
0.262 0.1
3.195 ,
0.738 0.9
Geometric Avg.,
Eq. (16-81),
1 xA
.929 0.9
dist
3.195 1.454
avg
n OG
. From data in 4.D7., y*
1
1 2.155
H OG
h n OG
16.D8. (was problem 15.D8 in the 2nd edition)
.071 0.1
12
0.9.
1.454
2.155
0.9 1 0.262
n
0.929 when x
0.262 1 0.9
n
0.262 1
0.9 1
4.80
0.42 m
m
H Ptot
22500 855
26.3
402
L
26.3 .0011
max
V
.0011 .0001
L
y out
x in
V
x *A ,out
0,
L
28.93 ,
x out
26.04 . Basis V = 1, then L = 26.04.
act
V
26.04 .001
L
26.04
mV
26.316
0.9895
Use Colburn Eq. (16-34b),
1
0.0011 0
n OL
n 0.010488
0.010488
0.0001 0
h
0.84 9.51
0.02604
.9895
9.51
7.99 m
Can check with Eq. (16-63) and get same n OL
16.D9.
New problem in 3rd edition.
For example, if nO ED 1, we have for the perfectly mixed model,
nO
ED
1/ 2
1 nO ED
For the plug flow model,
EMD 1 exp( nO ED ) 1 exp( 1)
EMD
For same value of nO
ED
0.632
the plug flow model always predicts a higher stage efficiency.
16.D10. (was problem 15.D10 in the 2 nd edition)
y in
n OG
y out
dy
y
y
*
. For both cases y*
y in
dy
n OG
y
y out
n
For both countercurrent and cocurrent
0, and y y*
y in
n
y out
0.01
0.0001
y , then
4.6
Note that n OG is same because of irreversible reaction.
c. Flow rates enter into solution only as a check that at least the stoichiometric amount of sulfuric
acid is available to neutralize the ammonia.
16.D11.
(was problem 15.D11 in the 2nd edition) From Eq. (16-72) with irreversible reaction,
n OG
n
y A in
n
y A out
50.0 ppm
0.01 ppm
8.517 for both cocurrent and countercurrent.
16.D12. a. (was problem 15.D12 in the 2nd edition)
L
.013 .00004
G min
L
.0053
G
Use Eq. (16-57),
15 L G
yin
min
0.013, y*in
m
H p tot
2.7 1.1 2.4545, y
mx
2.4453 (see Figure)
36.679, x out
m x out
y in
y out
L G
0.0003533
0.0008672, yout
0.00004, y*out
0
403
y
y*
.01296
n OG
b.
0.0121328,
in
y*
out
.0121328
n
0.0120928
y
.00004
6.1246 , h
.00004
4.59 ft
Cocurrent. Operating and equilibrium lines shown in figure. Lowest y out is at intersection point
= 0.00081. For y out
x out
y in
y out
m
L V
2.4545
L V
36.679
n OG
0.00085 ,
.013 .00085
36.679
0.00033125, y*Aout
mx out
0.000813
0.0669184 . Use Eq. (16-20),
1
0.013 0.000813
1.0669184
1.0669184
h 1.98 ft
0.0669184
0.00085 0.000813
5.496
16.D13. (was problem 15.D13 in 2nd edition) a. Same conditions as Example 16-3. Assume same H OL .
If operation is possible, find n OG & y out .
Dilute – Use Eq. 16-70. m = 30.36 (Example 16-3)
y*out m x out b 30.36 0.001 0.03036
mV
L
30.36
15
1
mV
1
L
2.024 , n OG
Lx in
Mass bal.
y out
n OG
L
V
Vyin
x in
1
y in
n
Lx out
L
V
mV
L
y in
y *out
y out
*
out
y
mV
L
Vy out
x out
n 3.024
1
15 0 0.03082 15 0.001
0.03082 0.03036
0.01582
mV
3.024
0.01582 0.03036
L
Not possible, term inside brackets is negative.
b) Same conditions as Example 16-3 except x out 0.002 . Assume same H OL . If operation is
possible, then
404
y*out
m x out
30.36 .002
y out
15 0
0.03082
1
n OG
c) Same conditions, except L V
*
out
y
15 0
n 1.759
1.759
1 exp
Then:
x
x
x
0.8,
0.03082 0.0091
0.01882 0.0091
0.656
0.759
Use equilibrium data shown in Figure 4-16,
n 1 E MV
h A active
30
0.8, K y a
1 2
n 1 .77
2 12
30
0.16, K y a
n 1 .69
.8 2 12
m
1
K ya
k xa
k ya
1
0.415
1
330.62
k xa
k ya
0.01, m
0.01882
30 and b
2 12 .
V
K ya
Solving simultaneously, k x a
b. x
still not possible
0.759
K y aA active h V [Eq. (16-77)] where V A c
1
Eq. (16-6a),
30.36 40
40 0.0003
16.D14. (was problem 15.D14 in the 2nd edition) a.
x 0.8, m 0.415; x 0.16, m 1.5
Mixed: E MV
2.024
0.0003
0.0091 , mV L
0.03082
1
n OG
0.00082
0.00082 0.06072
40 and x out
30.36 0.0003
y out
15 0.002
0.03082 0.06072
n 3.024
3.024
0.06072
, x
0.16,
330.62 where 1 2
263.5
1
1.5
1
263.5
k xa
k ya
1408.19 and k y a
0.8
366.317
142.18 & E MV
6.06. Then from Eq. (16-6a), K y a
0.468 from Eq. 16-77.
16-D15. (was problem 15.D1 in the 2 nd edition) Assume feed to Example 16-4 is sat’d liquid, z = 0.5, &
2.5 .5
separation complete x D ~ 1, x B ~ 0 . x F z 0.5, y f
0.7143
1 1.5 .5
xD
1,
L
1 0.7143
Vmin
1 0.5
At x
0.5714 , x B
.5, y intersection op lines
L
V
L
V
Calculate at x
x
1
0.6 0
actual
0.5 0
L
0,
L
V
V
x
D
0.7143 0
max
.8 .5
0.5 0
.2 1.0
1.4286
0.6
1.2
0.1, 0.3, 0.7 in example , 0.9
405
x
0.1
Sect
L/V
Strip
m
1
1 x
1.2
2.5
1 .15
0.3
Strip
1.2
1.8904
2
1.1891
2.5
.8
2.5
1 1.05
0.9 Enrich
.8
const.
V
A active h
0.3
0.7
0.9
1.767
E pt
0.6348
n
.6348
0.971
1.0092
n
1.3447
n
1.767
0.971
1.0092
n
0.971
1.3447
0.971
1.767
L
mV
n
E MV
L mV
1
n 1 E pt
x
0.1
1.3447
0.97. Calculate Ept. Solve Eq. (16-78) E pt
and then K y a from Eq. (16-76a), K y a
mV
1.0092
0.453
2
L
0.6348
0.5949
2
2.5
1 1.35
E mV
Eq. 15 80
2
1 .45
0.7 Enrich
2
1
0.5891
1
0.6802
1
0.731
1
0.7733
K ya
133.42
171.02
196.9
222.65
16.D16. New problem in 3rd edition. Using Simpson’s rule the new value for A1= 7.18, the new value
for A2 = 10.85 and the new total area = 18.03. Then the calculated height of the enriching section
(0.4054 m)(18.03) = 7.31 m compared to the previous result of 7.95 m. This is an error of 8.1 %.
Thus, a rather small error in mole fractions becomes a larger error.
16.D17. New problem in 3rd edition. Relative errors in k G a
24.4% .
Same relative errors in H G and H L .
In the enrichment section the slope of the mass transfer line is
Slope
L HG
5
0.4054 24.4%
V HL
8
0.253 24.4%
406
a) If H L correct but H G varies by
Value at
HG
24.4%, range of slope is from
1.242 to
0.761.
0.4054 is slope = 1.0015. At top:
If equilibrium line straight from azeotrope to point x = 0.7472, y = 0.7815, then can fit
this portion of equilibrium as,
y
MT line
y
If
s 1.242,
If
s 1.0015,
If
s
0.761,
0.7668x 0.2085
sx
b. Since y
x
0.8, b
0.8 1 s
b 1.7936
b 1.6012
b 1.4088
All calculations at y A
0.8.
mass transfer line, y
sx
y I at intersection equilibrium, y
b
x
y
0.7668x 0.2085 and
b
s
407
Substitute in for x,
yI
yI
0.7668
b
0.2085
s
Solve for y I
0.7668b
s
.7668
1
s
0.2085
yI
1
yI
s 1.242, b 1.7936 :
yI
0.81356
y
yI
0.013565
y
73.72
s = 1.0015, b = 1.6012: 0.812426 0.01246
s = 0.761, b = 1.4038: 0.80842 0.008419
80.48*
118.78
*83.3 in Example 16.1 since numbers rounded first. Amount of error depends on
distance between equilibrium and operating lines. Less error if closer, but more impact
on 1 y AI y I .
Assume same relative errors:
H L no error, H G higher,
H L no error,
1
y AI
yA
80.48 73.72
error
H G lower,
80.48
1
y AI
yA
8.4%
118.78 80.48
error
80.48
47.6%
Assume error in H is same every point. Thus enriching area can be a lot different than
calculated. But if H G is down by 24.4%, area is up by 47.6% so there is some
cancellation of error.
b. If H L & H G both vary could have s 1.634 and b
yI
Area
H GE
y
0.493,
1
yI
y
2.1072 . Thus, y I
0.81493,
= 66.97
66.97
19.6 16.31.
80.48
1.24(0.4054) 0.503 m, z H G,E n G,E
Since
8.20 m which is a 3.2 % increase.
16.D18. New problem in 3rd edition.
a. Equilibrium is y = mx. Value of m is unknown, but Cextract = mconc units Craffinate with
mconc _ units
20.8
kmol _ Benzoic / m 3extract
kmol _ Benzoic / m 3raffinate
. We need m in
408
mol Benzoic / mol extract
mmole fraction units
mol Benzoic / mol raffinate
mconc _ units (
mmole _ fraction _ units
MWextract
)(
extract
. The resulting conversion is,
raffinate
MWraffinate
)
Since the system is dilute, extract properties are essentially the same as pure solvent and
raffinate properties are essentially the same as diluent.
m = (20.8)(92.14/865)(1000/18) = 123.1
Note that y = xD and EMy = EMD.
EMy = (yin-yout)/(yin-yout*) where yout* = m xout = (123.1)(1.99E-06) = .000245
EMy = (0-.000230)/(0-.000245) = 0.939
b. From Eq. (16-76b), nO-ED = EMy/(1-EMy) = 0.939/(1 – 0.939) = 15.393
nO
KO
KO
ED
QD
ED
a
nO
ED
a Vmixer
D
MWD
ED
QD
D
h D2 / 4
, Vmixer
(0.75)
0.75 2 / 4
0.331m3
/ (Vmixer MWD )
(15.393)(.0012)(865) / [(0.331)(92.14)]
0.524 kmol / s m 2 mol frac disp
Note that K O
ED
m 2dispersed / m 3total volume
a is larger than in Example 16-5 because the residence time
Vmixer
37.45s is shorter than the 361 s in Example 16-5. Thus, this problem
(Q D Q C ) d
requires much more vigorous mixing.
t res
c. Differential Model
exp
E MD
n OED
n OED
KO
ED
a
nO
ED
QD
1 exp
1 E MD
n 0.061
D
n OED
0.061
2.797
n OED
2.797
/ (Vmixer MWD )
(2.7969)(.0012)(865) / [(0.331)(92.14)]
0.0952 kmol / s m 2 mol frac disp
d. Use of mixed models: If use K O
nO
KO
ED
QD
ED
a Vmixer
D
MWD
ED
a
m 2dispersed / m 3 total volume
0.524 from mixed staged model, then
15.393 and with differential model
409
E MD 1 exp
wrong results.
16.D19.
n OED
1 exp( 15.393) .9999998 . Obviously, mixing models gives
New problem in 3rd edition.
C D in C D out
a. E MD ,Conc
with C*D,out
*
C D in C D ,out
CD,in
0.000 , CD,out
C*D,out
mCD CC,out
nO
.00023
KO
ED
a
nO
ED
QD
nO
ED
ED
D
0.00536
0.0002578
.892
.0002578
ED
1 nO
0.00023 , CC,out
0.0481 CC,out
E MD
b. E MD,Conc
mCD CC,out
E MD,Conc
0.892
1 E MD,Conc
0.108
8.26
/ (Vmixer MWD )
(8.26)(.0012)(865) / [(0.331)(92.14)]
0.2811 kmol / s m 2 kmol/m 3
m 2 dispersed / m 3 total volume
c. Differential Model:
E MD,Conc 1 exp n OED → exp
n OED
KO
ED
a
nO
ED
n .108
QD
D
n OED
2.2256
1 E MD,Conc
n OED
0.108
2.2256
/ (Vmixer MWD )
(2.2256)(.0012)(865) / [(0.331)(92.14)]
0.0757 kmol / s m 2 kmol/m 3
16.D.20.
m 2 dispersed / m 3 total volume
d. E MD,Conc 1 exp n OED
New Problem in 3rd Edition.
1 exp
8.26
a. Eq. (16-92). Terms:
0.167,
Dbenzoic-water
d
0.99974
2.2 10-9
C
CD
4 3 2 . 6 8
A
C
(from Example 16-6)
di
2
0.2070 16.6667
g
Note
9.807
2
5.8632
N in rps
410
di
0.2070
dp
0.0002524
820.13
dp
0.0002524
d tank
0.8279
D
d pg
0.00030487
865 0.0002524 9.807
96.447
0.0222
kC
0.00001237
2.2 10
0.0002524
x 0.00030487
12
Significantly higher. But Note:
With same k d
0.001905.
96.447
820.13
1
5 4
0.167
12
2
0.014801
0.06, so correlation may not be valid. Same
d
1
1
1
K LD
kD
m CD k C
1
1
K LD
0.001905
1
0.014801
20.8
K LD
0.0005181 & K LD a
E MD
5 12
432.68
1
K OED a
b.
9
1930.2
2.0586 s
1
865 2.0568 92.14 19.13
19.31
20.31
which agrees with guess for residence time.
0.951,
Resistance (dispersed) =
Resistance (continuous)
Sum of resistances
1
0.001905
1
524.9
1404.5
0.000712
1929.4 Gives K LD 1 1929.4
0.0005181
% resistance from dispersed
524.9 1929.4 100 27.2%
This is a significant contribution because of significantly higher predicted
continuous phase mass transfer coefficient.
c. If k D is ignored , K LD k C mCD 0.014801 20.8 0.000712
Note that this is significantly too high.
d. To be safe, use lower estimate of E MD . Note that d is really too large for use of
Eq. (16-92).
16.D.21. New problem in 3rd edition. In settler velocity approaches zero
( u t 0.00172 in Example 13-5, but d p 0.000204 not 0.000150 assumed). Thus
u t ~ 0.00495 m s and Eq. (16-88a) is reasonable approximation.
Sh C
k C d Dbenzoic-water
2.0 where in settler d
0.0002524
411
kC
Using
2.0 2.2 10
K LD ~ k C mCD
9
0.0002524
5
1.7433 10
1.7433 10
1 20.8
5
8.381 10
7
ms
If the interface in the settler is at the centerline, then the volume of aqueous phase is
1
D S2 4 L S . From Example 13-5, DS
2
1.023m and LS
4DS . Then Volume
aqueous phase 1.682 m3 . The water residence time is
280.3s. Entering total velocity is 0.0072 m3 s and
1.682 m3 0.006 m3 s
d
0.167 leaving mixer. A drop that starts at the bottom of the water phase travels a
vertical distance of DS 2 0.5115 m to reach the interface. This requires
0.5115 m 0.00495 m s
103.2s.
Assume equal distribution of drops. Everything (half the drops) above interface are
collected very quickly. All drops collected in 103.2 280.3 0.368 fraction of settler.
If average over this fraction is 0.5 d,IN , then D,avg 0.5 0.167 0.368 0.031.
6
a
6 0.031
d
dp
K OED a
737 and K LD a
0.0002524
D
settler
n OED,settler
K LD a
Vsettler Q D
settler
MWD
0.0058
settler
~ 0.000618
865 0.000618 92.14
3.364 0.0012 0.0058
865 92.14
16.D.22.
1.7314.
865 92.14
Since settler is not well mixed, E settler,D 1 exp
This is high because of long residence time.
0.0058
1.734
0.823
New problem in 3rd edition.
a)
E SD
y M,OUT
yS,OUT
y M,OUT
*
S,OUT
y
y*M,OUT
0.82,
E MD
y IN
y M ,OUT
y M ,OUT
y IN
*
M ,OUT
y*M ,OUT
y
0.794
mx raf ,OUT .
From Example 16.5 in mole fraction units m 123.1.
Mixer mass balance with y IN 0 (Example 16.5) is Fx F
Sy M,OUT
Fx C,OUT
3
In Example 13.5 feed is 0.006 m s and solvent is 0.0012 m3 s
S
0.0012 m3 s 865 kg m3
F
92.14 kg kmol
0.006 m3 s 998 kg m3
x M ,OUT
x feed
S F y OUT
0.01127 kmol s
18.02 kg kmol
0.00026
0.01127
0.3323
0.3323kmol s
y OUT
Then substitute into E MD
y M ,OUT
123.1 0.00026 0.03390 y M ,OUT
0.794
412
Solving, we obtain
x M,OUT
y M,OUT
m E MD
For settler,
Settler M.B. is,
y M,OUT
0.00589
y*S,OUT
Sy M,OUT
x S,OUT
0.00589.
123.1 0.794
m x S,OUT
Fx M,OUT
SyS,OUT
S
x M ,OUT
x S,OUT
6.027E 5.
y S,OUT
F
6.027E 5
Fx S,OUT
y M ,OUT
0.03390 yS,OUT
0.00589
Substitute into equation for E SD
0.82
0.00589 yS,OUT
0.00589
123.1
6.027E 5
Solving, we obtain yS,OUT
From Mass Balance,
x S,OUT
6.027E 5
0.006174.
0.03390 0.006174 0.00589
*
S,OUT
y
m x S,OUT
E Total,D
b)
0.00019967 0.03390y S,OUT
From 16.C4
123.1 5.0653E 5
yS,OUT
0.006174
*
S,OUT
0.006235
y
mS
F
123.1
5.0653E 5
0.01127
0.3323
0.006235
0.99015
4.17495
E Total,D
0.794 0.82 1 0.794 4.17495 1
1
4.1794 0.794
1
4.17495 0.82
4.17495 0.794 0.82 1 0.794 4.17495 1
.99003
16.G1 and 16.G2. New problems in Chapter 16. Aspen Plus runs showed that N =13 (Aspen Plus
notation) with feed on Nfeed = 11 (optimum location) gave ethanol mole fractions of xD = 0.7990
and xB = 0.020298. These values are within the specified tolerances. The stripping section starts
with the vapor leaving the reboiler (yin,strip = yreb = 0.18709) and ends at the intersection of the two
operating lines. This last value can be determined by calculating the points on the operating lines
(xn, yn+1). For example n = 1, x1 and y2 are on the enriching section operating line. When the
slope changes from 0.61 in the top to 2.07 in the bottom, the intersection point has been passed.
This occurs for yout,strip = y11 = 0.44631.
The mole fractions of ethanol in the liquid and vapor leaving each stage (Aspen stage notation is
used) are:
413
Stage
1
2
3
4
5
6
7
8
9
10
11
12
13
x
0.79904
0.77157
0.74561
0.71971
0.69245
0.66203
0.62575
0.57882
0.51135
0.40050
0.22553
0.10033
0.020289
y
0.81824
0.79904
0.78189
0.76569
0.74957
0.73263
0.71375
0.69129
0.66233
0.62090
0.55339
0.44631
0.18709
Equilibrium: Calculation m
The equilibrium parameter m is the average slope of the
equilibrium curve from x (calculated at y) to xI.
At the reboiler y = 0.18709 for x = 0.020289, and y* =
0.44631 for xoper =0.10033. Then yavg = 0.3167.
The slope can be determined by taking the chord from
x = 0.04 (y*= 0.29209) to x = .05 (y*= 0.33018).
m = (0.33018 – 0.29209)/0.01 = 3.809.
The equilibrium values are from Analysis in Aspen Plus.
At yout,strip = 0.44631, xoper = 0.22553, y*= 0.55339, and
yavg = 0.49985. m = (0.50405 – 0.49482)/(0.15 – 0.14)
or m = 0.923.
To use Simpson’s rule for the first integral in Eq. (16-22a) we also need an average m for the y
and y* values calculated at the average between yin,strip and yout,stip, which is y = 0.3167. At this y,
xop = 0.1659 (determined from the stripping section operating line) and y*=0.5174. The average
between y and y* = 0.41705. m = (0.42921 – 0.41012)/(0.09 – 0.08) = 1.909. The second integral
in Eq. (16-22a) is the usual estimation from Simpson’s rule of the nOG integral,
y A ,out
dy A / ( y A * y A ) = (0.2835/6)(0.44631 – 0.18709)[1/(0.44631 – 0.18709) + 4/(0.5174 - 0.3167)
HG
y A ,in
+ 1/(0.55339 – 0.44631)] = 0.4057 m
The first integral in Eq. (16-22a) can also be estimated from Simpson’s rule,
y A ,out
( H L / ( L / V ))
mdy A / ( y A * y A ) = (0.1067/2.032){[(0.44631 – 0.18709)/6]×
y A ,in
[3.8577(3.809) + 4(4.983)(1.909) + 9.3388(0.923)]} = 0.1393
Then h = .4057 + 0.1393 = 0.545 m, which is somewhat more than the 0.507 m calculated in
Example 16-1. Note that the Aspen Plus calculation does not assume CMO whereas the
calculation in Example 16-1 did, but the calculation here required an assumption of how to
calculate m. Thus, it is difficult to say which is more accurate.
16.G2. New problem in 3rd edition.
Enriching section yin,enrich = yout,strip = 0.44631, and yout,enrich = xD =x1 = 0.79904. At yin,enrich =
yout,strip = 0.44631, the calculation of m is the same as done previously for yout,strip: xoper =
0.22553, y*= 0.55339, and yavg = 0.49985; m = (0.50405 – 0.49482)/(0.15 – 0.14) = 0.923.
At yout,enrich = xD =x1 = 0.79904, y* = 0.81824, and yavg = .80864; m = (0.81180 – 0.80481)/0.01 =
0.699.
In Example 16-1 the enriching section integration was done with Simpson’s rule in two parts. From yin,enrich to y = 0.725 and from y = 0.725 to yout,enrich. For the calculation here we will use y =
0.71375, which is in the table of data from Aspen Plus, as a convenient break mole fraction to do
the integration in two parts. For y = 0.71375, xoper = 0.66203, y*= 0.73263, and to find m, yavg =
0.72319. m = (0.72623 – 0.72101)/(0.01) = 0.522.
414
The average y from yin,enrich = 0.44631 to y = 0.71375 is 0.58003, xoper = 0.44423, y* = 0.63659,
and to find m, yavg = 0.60831. m = (0.61020 – 0.6067)/(0.01) = 0.350.
For the 2nd integral in Eq. (16-22a) integrated from yin,enrich = 0.44631 to y = 0.71375 we obtain,
y A ,out
dy A / ( y A * y A ) = (0.4054/6)[.71375 - .44631][1/(.55339-.44631) + 4/(.63659 -.58003) +
HG
y A ,in
1/(.73263-.71375)] = 2.404 m
Same integral integrated from y = 0.71375 to yout,enrich = 0.79904. The average y from y = 0.71375
to yout,enrich = 0.79904 is 0.75640, xoper = 0.73068, y* = 0.77246, and to find m, yavg = 0.76443. m
= (0.76587 – 0.75985)/(0.01) = 0.602.
=(0.4054/6)[.79904 - .71375][ 1/(.73263-.71375) + 4/(.77246 -.75640) + 1/(.81824 - .79904)] = 2.041
Total for integral 2 = 4.445 m
For first integral from yin,enrich = 0.44631 to y = 0.71375 we obtain,
y A ,out
( H L / ( L / V ))
mdy A / ( y A * y A ) = (0.253/0.625)[(0.71375 – 0.44631)/6][(0.923)(9.388) +
y A ,in
4(0.350)(62.2665) + (0.522)(52.966)] = 1.102
Same integral integrated from y = 0.71375 to yout,enrich = 0.79904,
y A ,out
( H L / ( L / V ))
mdy A / ( y A * y A ) = (0.253/0.625)[(0.79904 - 0.71375)/6][(0.522)(52.966) +
y A ,in
4(.602)(18.2815) + (.699)(52.0833)] = 0.870
Total for integral 1 = 1.972 m
Total height of enriching section = 4.445 + 1.972 = 6.417 m
Total height of packing = 0.545 (from 16.G1) + 6.417 = 6.962 m.
This is less than the total of 8.457 m calculated in Example 16-1. However, it does agree
reasonably well with the number of stages (11) in the column since,
11 × HETP (estimated = 0.655 m in Example 16-2) = 7.208.
Both this result and Example 16-1 require calculating a small difference and then taking the
inverse of this number. This type of calculation can cause very significant errors. The graphical
calculation was based on accurate experimental measurements of the equilibrium data, and this
data is probably more accurate than the NRTL correlation used in the computer. On the other
hand, calculation errors are probably larger in the graphical than in the computer calculation.
Both calculations depend significantly on the accuracy of the mass transfer data (HL and HG),
which can easily have errors greater than 20%, which can cause even larger errors in calculation
of NTU and HTU or in HETP (see problem 16.D16) for the staged calculation.
415
16.G3. New problem in 3rd edition.
Part b. Equilibrium stage optimum. (L/D)min = 5.1, L/D = 6.12, N = 33, NF = 14, 1 section, yC4,dist
= 0.008556, xC3,bot = 0.005706, Dia = 1.804 m on plate 32, minimum diameter = 1.565m on tray
14.
Part c. VPLUG optimum. N = 33, NF = 14, yC4,dist = 0.007953, xC3,bot = 0.005302, Dia = 1.812 m
on plate 32, DC backup/tray spacing = 0.391, weir loading = 0.021m2/s. Note that this separation
is better than the equilibrium result.
Part d. MIXED optimum. N = 49, NF = 22, yC4,dist = 0.007651, xC3,bot = 0.00510, Dia = 1.808 m on
plate 48, DC backup/tray spacing = 0.390, weir loading = 0.021m2/s. Note that this separation
require significantly more stages than both the equilibrium-stage and the plug flow results.
16.H1 and 16H.2. New problems in 3rd edition. Fit for the ethanol-water VLE was done in Appendix B of
Chapter 2. The spread sheet for both problems is given below with a y value chosen in the
enriching section (ignore the stripping section operating line values). Overall mass balances to
find D and B were done with Eqs. (3-3) and (3-1). L and V were determined at the total
condenser and flows in the stripping section were determined at the feed stage with the calculated
value of q. L bar = L + q F. The intersection point of the two operating lines was determined
from Eq. (4-38). yreb is the start of the stripping section and is the y value in equilibrium (yeq)
with y = x = xB. In the stripping section the value of 1/(yeq – y) was determined at the start of the
stripping section (yreb), at the end of the stripping section (yintersection), and at the average of these
two values. Then Simpson’s rule was used to calculate nOG,strip = 1.57787 from Eq. (16-24b). To
determine HOG from Eq. (16-27a) an average slope m of the equilibrium curve is required. The
slope of the chord from the equilibrium y at the intersection point of the two operating lines to the
reboiler vapor that is in equilibrium with xB, mstrip ( y eq ( xint er sec tion) y reboiler) / ( xint ersec tion x B)
= 1.95, and HOG,strip = 1.265. The resulting height of the stripping section, 1.998 feet, is somewhat
more than the 1.66 feet determined in Example 16-1.
In the enriching section a similar procedure was used except the integration to find nOG,enrich was
done in two parts. The average slope of the equilibrium curve was determined from,
menrich ( y1 y equilibrium( xint ersec tion)) / ( x D xint ersec tion) = 0.4558 with y1 xD . The resulting
value of HOG,enrich = 1.935. The resulting height of the enriching section, 29.35 feet, is somewhat
more than the 26.1 feet determined in Example 16-1 and more than the 25.35 feet determined in
problem 16.D1.
Note: in both 16.H1 and 16.H2 the average slope of the equilibrium curve m has to be calculated
with fairly large chords, not by taking the derivative of the 6th order polynomial fit to the VLE.
The reason is that the fit oscillates around the experimental data points and the slopes will
fluctuate greatly.
416
417
SPE 3rd Edition Solution Manual Chapter 17.
New Problems and new solutions are listed as new immediately after the solution number. These new
problems are: 17A2, 17A7-17A9, 17B2, 17C4,17D3, 17D8, 17D10-17D13, 17D15b-h, 17D1617D18, 17E1, 17H2-17H7. Chapter 17 was chapter 16 in the 2nd edition. Problems from that
edition have the same problem number, but the chapter number is now 17 (e.g., problem 16.D6 is
now 17.D6). Figures in the solutions to these old problems still have the designation of chapter
16.
17.A2. New problem in 3rd edition. Change the value of thetatot in the spreadsheet until the area matches
the desired value. This can be done as a manual trial and error or a loop can be added to the spreadsheet.
17.A7. New problem in 3rd edition. Part a. Increase the stirrer speed.
If no gel, increasing stirring increases mass transfer coefficient k which reduces M and hence xw is
reduced. This reduces xp increasing retention R.
Part b. Decrease the stirrer speed. This reduces k, increases M and xw. When xw > xgel, a gel forms and
R increases (probably to l.0) .
17.A8. New problem in 3rd edition. Since there is a gel the retention of the low molecular weight
compound also increases.
17.A9. New problem in 3rd edition. Do not invest. Osmotic pressure can often be ignored in UF because
with large molecules with high molecular weight the mole fraction is always low even if the weight
fraction is high. With low mole fraction the osmotic pressure is low. If there is a concentrated salt with a
low molecular weight the mole fraction will be high and the osmotic pressure cannot be ignored.
17.B1. Look at Suk, D.E. and Matsuura, T. (2006) ‘Membrane-based hybrid processes: a review’, Sep.
Sci. Technol. Vol. 41, pp.595–626 for additional processes.
17.B.2. New problem in 3rd edition. One possible approach is as follows: Increase stirring to increase the
mass transfer coefficient and reduce the wall concentration to prevent gel formation. Then use a permeate
in series cascade with recycle of the retentate from the second module in series back to the feed of the
first module. The low molecular weight product is the permeate from the second module. The
intermediate molecular weight polypeptide product is the retentate from the first module.
17.D1.
PCO 2
15 10
cc STP cm
10
pr
PCH4
0.48 10
10
PCO2 PCH4 31.25
a) Generate RT curve from Eq. 17-6a.
pp
yp
1
1 yP
pr
yr
1 yP
AB
AB
1 10 6 m
tm
cm 2 s cm Hg
pH
12 atm
pP
ˆ CO
AB
1
pL
2
ˆ CH
12 76.0
0.2 atm
4
912.0 cm Hg
15.2 cm Hg
1.0, p p p r
0.016666
y P 1.5042 0.5042 y P
31.25-30.25 y P
418
RT
Curve
yP
yr
Op. Eq., FP FIN
0
0
0.1
0.20
0.00515
0.01114
0.30
0.01830
0.40
0.5
0.02721
0.03882
0.6
0.7
0.05504
0.08000
0.8
0.9
1.0
0.12492
0.2349
1.0
y out
y out
PCO2
t ms
cc STP cm
FP
FP
b.
1000
FIN
gmole
1 hr
h
3600 s
0.0002859
cc STP
J CO 2
Fin
Fin,1
FP1
2.125
0.32
Fin
0, y P
.15 .32
yP
pr yr
0.402, y out
0.46875
0.25625
0.0276 CO 2 conc.
(17-2b)
pP yP
0.088888
L
0.46875
2.125 .10
15.2 cm Hg 0.402
0.0002859
cc STP
cm 2 s
gmol
s
1.0 gmole
2
cm s 1000 cc 22.4 LSTP
FP y P,CO 2
FP
1 0.32
912 cm Hg 0.0276
1 10 cm cm s cm Hg
Area
0.15 CO 2 mole frac
0.10, y P
Answer (from graph)
2
J CO 2
FP FIN
Plot two arbitrary points:
4
FP
y IN
Slope
10
15 10
y out
y IN
y out
FP FIN
yP
J CO2
J CO2
1 FP FIN
yP
0.32
1.2764 E 8 gmole s cm 2
2.80 10 6 cm 2
0.32 kgmole/hr , Fout
Fin
FP
1 0.32
0.68 kgmole/hr.
1 kgmole/hr
1
2
FP,part a
Stage 1. FP1 Fin1
1
2
0.32
0.16
0.16 1.00
FP 2 , Fout1
0.16 , yin ,1
Fin2
FP1
1 0.16
0.84
Fin ,2
0.15
RT curve is unchanged!
1 .16
0.84
Op. Line: Slope
5.25
0.16
0.16
Find arbitrary points to plot line:
0.15
If
y out ,1 0, y p
0.9375 (off graph).
0.16
419
If
y out,1
0.04, y p
y out,1
If
5.25 0.04
0.08, y p
5.25 0.08
Answer (from graph):
Stage 2
FP 2
0.16
Fin 2
0.84
0.7275
0.9375
y P,1
0.5175
0.625, y out,1
0.1905,
0.0595
y in2
0.0595
FP2 Fin2
0.1905
yin,2
0.3123
1 0.1905
4.2500 . Plot curve
0.1905
Answer:
y P2 0.250, yout 2 0.015 (see graph)
Stage
15 10 10
cm 3 STP
912
0.0595
15.2
0.625
0.0006715
1 10 4
cm 2s
1L
1
mol
JCO 2 J CO 2
2.9976 E 8
1000 cc 22.4
cm 2s
mol 1 h
FP1
0.16 1000
0.04444 mol s
h 3600s
FP1 0.625
Area 1
92.67m 2
JCO 2 ,1
Slope
J CO 2
0.9375
Stage 2: J CO 2 ,2
15 1010
1 10
JCO 2 ,2
4
912 0.015
13.2 0.250
1L
J CO 2
1
0.0001482
6.6161 E 8
3
1000 cm 22.4
lh
FP 2
0.1905 840 mol h
3600 s
FP 2 y P 2
Area 2
1, 680, 000 cm 2
JCO 2 ,2
1:
cm 3 STP
cm 2s
mol
cm 2s
0.04445 mol s
168 m 2
It is interesting to compare parts a and b.
Part a:
1 stage
Area
280m 2
y out,CO 2
0.0276 or 97.24% CH 4
y P,CO 2
Part b:
2 stage
0.402
Total Area
260.67m 2
y out
0.015 or 98.5% CH 4
y P1
0.625
y P2
0.250
420
17.D2. a.
yP
Slope
1 FP Fin
y in
, yP
FP Fin
FP Fin
.7
2.333 , When y out
.3
y out
y out
0, y P
y in
0.2 CO2 , FP Fin
0.2
0.3
.3
0.6667
421
When
yP
y in
0.2
0.286
1 FP Fin
.7
RT curve is same as in Problem 17.D1.
Draw op line. From graph: y P,CO2 0.53, y r y out,CO2
b.
0, y out
J CO2
J CO 2
15 10
10
pP yP
t ms
cm 3 STP cm 76 cm Hg
1 10 4 cm cm 2s cm Hg
J CO 2
A
PA p r y r
0.06
0.002148
atm
cm 3 STP
2
cm s
60 atm 0.06
FP
, FP
Fin
Fin
0.6
1000 cm 3 STP
0.6 mol s 0.53
3
1 mol
cm STP
0.002148
22.4 L STP
cm 2s
L STP
3.3 0.53
mol
s
atm
.
3, 254, 000 cm 2
Or 325.4 m 2 . Very sensitive to y P & y r values.
Can also calculate J
Check:
Fin
Fin x in
FP
Fout , 2
FP y P
J CO 2
0.6 Fout
Fout y out , 0 .4
FP
ˆJ
J CH 4 . A
Fout
1.4
2 0.2
0.6 0.53
1.4 0.016
.402 , OK
422
17.D3.
New problem in 3rd edition Since no concentration polarization x w
J solv
K solv
t ms
pr
pp
a xr
R
and M.B.
xp
xp
xp
x out
1
xF
1 R
xp
Then
pr
1 R x out
415.4
a xr
xp ,
1 R x out , R
,
xF
x out
Then,
pp
K solv t ms
1
x out ,
xp
J solv
pr
Solve for
xr
1
0.22, x F
K solv
t ms
33.29, J solv
415.4
0.9804
0.0077
0.0077 0.22
0.78
1 0.9804
0.22
0.0098175
0.0001924
1.1 15.446 0.0098175 0.0001924
33.29
17.D4. Partially new problem in 3rd edition.
13.72 atm.
423
a.
xw
M
exp ( J solv /
xr
1 xP
Mxr
xP
1
pr
3.6 E
3.6 E
K solv
solv ) k
pP
4.625 / 997000 g/m 3
exp
6.94 10
Mxr
xP a
1.069 0.054
75 2
pr
pp
3.6 E
1.069 0.054
4
3.6 E
4
59.895
4.625
J solv
t ms
1.069
xP
4
4
5
a Mxr
Since
73
xP
1.0689 .054
K solv K A , K A
K solv
and
3.6 E
KA
t ms
4
59.895
2.29
1
atm
0.0665
g
2
m s atm
K solv
t ms
g
KA
m s atm 0.029 g
t ms
2.29 atm 1
m 2s
c. Write Eq. (17-37a) for old and new situations – Divide new by old. Obtain
0.0665
2
0.75
k new
k old
new
Everything else divides out. Since
rpm ,
old
k new
17.D5. a.
K solv
t ms
J solv
pr
RT eq., R
k old
.75
2000
0.000117m / s
1000
1.5 10
3
g
2
cm s
pP
1
102 atm
1.47 10 5 g
1 FP Fin
1 x P x out , Op eq., x P
cm 2 s atm
x out
x in
FP Fin
FP Fin
Solve simultaneously & obtain Eq. (17-26), which with M = 1 is
1 R x in
0.003 0.05
xP
xP
0.000272 , x out
0.091
1 R
1 0.997 0.45
1 R
1 xP
x P pr
xr
pP
xP
xr
xP a
1 0.000272 0.091 0.000272
0.000272 102
0.091 0.000272 59.895
b. Plot the RT curve and operating line
xP xP
a 1
pr pP
xr
M 1
a
1 xP
See graph. Intersection occurs at x r
J solv
K solv
t ms
pr
pP
1
, xP
0.0585, x P
a M xr
1
3.44 atm
xr
1
x in
0.000752
xP
424
425
J solv
1.47 10
2
5
g
78 atm
cm s atm
FP 1 x P
, FP
A
J solv
2
3
2
Fin
3
4
1000 g kg
g
cm 2 s
3.36 10 6 cm 2
2
9.91 10 g cm s
Eq. (17-45) can be written as J solv /
k
solv
n xg
336 m 2
n xr
n x r . Slope = k and intercept = k n x g
cm
J solv /
solv
0.052
0.037
0.026
0.0134
See Figure. Plot J solv /
solv
Intercept
Stirred cell data:
cP
J solv /
J solv
g L,
solv
wt frac
xr
min
n xg
Slope
J solv
0.000991
3.33 kg s
4
Plot J solvent vs
17.D7.
5 kg s
3.33 kg s 1 7.52 10
A
17.D6.
59.895 atm 3 0.0585-7.52 10 -4
dextran
0.012
0.03
0.06
0.135
versus ln xr
0.0185
0.01596
K solv
t ms
J solv
p
23.1 / (997 g / L )
n xr
4.423
3.507
2.813
2.00
1.159, which is x g
69.25
3.0
23.1
0.314 .
g
2
m s bar
L
0.0232 2
m s bar
426
J A ~ J solv c P
Mc
With
0.00696 g (m 2 s) . Also, J A
0.0232 0.30
1, 1 R c
Spiral Wound:
JA
Solving for M c
JA
0.00696
c out J solv
10 (0.0232)
J so l v c P
0.03 → R c
0.97
M c cout 1 R c J solv
cP
1.0
c out 1 R c
8 0.030
K solv
J solv
M c cout 1 R c J solv
t ms
p
4.1660
80.8g / (m 2s)
23.1 3.5
Since osmotic pressure is ignored, M c does not effect solvent flux in UF.
yp
1
He H 2
rd
17.D8. New problem in 3 edition From 17-6b, y rHe
He H 2
Check y rH
2
1 y PH
Then
2
1 y PH
H 2 He
y rHe
b
Pr
2
H 2 He
b.
Pp
1
H 2 He
pp
pr
1 y rH
2
1
0.975
c
y r ,He
0.025 0.07656
y F,He (1
yP
.9234
0.07656 OK.
y PHe
1
2.8314 .975
1
2
0.05 0.07656
1
.07656
3.8314 1 .2 .025
3.8314
y rout He
1
1
10
y FHe
y F,He
1
1 yp
1 y P He
0.5152
Use solution in Eqs. (17-9) to (17-10e)
pp
.75
a
1
.2 .261 1
1
pr
.25
1
Pr
0.2610 , p p p r 0.2
90.8 10 10
.739 0.2 .975 1
0.021397
0.025
.261
.739 0.25
.279475
y rHe
y PH
23.7 10
PHe PH 2
Pp
.739 .2 3
)
.261 .05
b
b2
4ac
2a
Must use minus sign to have positive y p . y PHe
.25
2.3648
.05
1
.25
.25
1.4874
0.0522
1.4874
2.212359 .49377
2
.15763
4.7296
2.3648
1.4874 1.645
4.7296
0.00333
427
y r,He
y F,He
y PHe
1
1
c. Solve RT eq. (17-6b) for y p : y r
0
yr
pp
1
1 yp
y 2p
pr
pp
1
1
c
yr
yr
pr
y rH2
.9234,
1 yr
pr
y rHe
y PHe
y rHe
FP y PH
FP
A
0.025,
2
.06
.739
.80786
.65264
y p,H 2
0.004842
0.1813
0.05,
y H2 IN
.95
.5152
0.975
FIN
pr yr pp yp
tm s
51.52 m3 STP h
1h
h
m3
3600 s
90.8 10
10
cm 3
cm 3 STP
14311.11
14311.11
2
a.
yp yr
PH 2 A
s
cm 3 STP
s
STP cm
cm 2s cm Hg
A
17.D9.
1 yp
pr
c
y He,IN
1000000 cm 3
Pp y P,H 2
1
.2956
0.05 0.06
0.004842 0.06
51.52m 3 STP
PH 2 Pr y r,H 2
1
.739 .2 1
.80786
y rHe
0.07656 y p,H 2
FP y PH tm s
pp
1
0.01566
4ac
2a
y FHe
Use 17-5a written as
FP
1
100m3 STP / h.
FIN
For Part A
pp
b2
Use + sign for positive y p ,
d.
y p2
0.1478
.06 .261
b
yp
.739 .2
pr
b
pr
0.10001
b
pp
1
.25
pp
1
a
a
.05
3 .00333
555,186 cm 2
.975 1.0 10 4 cm
380 .9234
76 .975
cm Hg
55.52 m 2
Plot the data on a semilog plot in the form of J solv /
solv
J solv L / (m 2 h)
428
J solv
xr
k n
xg
.
From graph, slope
When x r
k n xr.
Intercept
18.3 and k
18.3
k n xg
0, J solv /
n xg
k
solv
2
=J solv
82.9 L m h
23.0 g m 2s
4.53
5.08 m / s
xg
k n xg
L
5.08
2
m h
m
2
s
23.0g / (m s)
k n xg
92.8%
The value of xg is very sensitive.
b.
There is only one point further out on the ℓn axis. Any error in point is greatly amplified in the least squares regression. Hence, another point in this region would be most useful. The higher
the concentration, the better.
17.D10. a) New problem in 3rd edition
2700
800
3.375 , a
b
1
c
yin 1
yp
3.8884
1
Solve RT eq. and op. eq. simultaneously
pp
0.3 .5
1
2.375 1.6116
pr
0.7 2
pp
pr
yN
1
1
1
1
3.375 .25
3.8884
2
.7
2.375
.3
.25
1
2
.7
.7
.7
3.8884
1.20536
4 1.6116 1.20536
2 1.6116
.5
, use minus sign to have yp between
0 and 1..
429
yp
3.8884
2 1.6116
From op. eq.: y r
b)
Since F̂p y p,A
A
15.1196 4 1.6116 1.205
y IN
yp
1
PA A ˆ A
t ms
1
PA ˆ A p r y r
pp yp
.365295
.7
pr yr
F̂p y p,A t ms
.3
0.365295
.25
0.2006
.7
pp yp
ˆ
. Since F
IN
1 mol s, Fˆp
FˆIN
0.3 mol s
mol
0.365295 1.2 10 4 cm
s
3
cm STP cm
1.0 L STP
1
2
L STP 10 3 cm 3 STP
cm s cm Hg
22.4
mol
0.3
A
2700 10
10
76 cm Hg
atm
A
A
c)
F̂p y p,A t ms
PA ˆ A p r y r
pp y2
, Fˆ p
Fˆ IN
mol
s
0.325 1.2 10 4 cm
xp
Gelling occurs at a solvent flux of J solv
Then x gel
solv
5200
2.0 0.175
0.5 0.325
atm
9.0823 104 cm 2
17.D11. New problem in 3rd edition.
J solv
atm
0.4 mol s
1
3
cm
STP
cm
22.4L STP 1.0 L STP 76 cm Hg
2700 1010
2
cm s cm Hg
mol
10 3 cm 3STP
atm
A
J solv
.5 .365295
6.569 104 cm 2
0.4
A
2.0 .2006
L
2
m day
x out exp (J solv /
997
g
0 since R 0
x IN
1
0.001
.6
0.0016667
5200 L/(m 2 day ) which is
day
L 86400 s
solv ) k
1.0, x out
60.0
g
m2s
0.0016667 exp
17.D12. New problem in 3rd edition p p / p r
1.0 4.5 .
60.00g / (m 2 s) 997000g / m 3
2.89 10 5 m / s
PHe
He H 2
PH 2
0.01334
0.261. Use Eq. (17-6b),
430
y p ,He
p
1
He H 2
1 yp
pr
y r ,He
1
1 yp
Eq. (17-7c)
.261
y FHe
y rHE
.2 .254
y p He
y rHe
.1 .254
a)
If x p
x in , cut
.55 , perfectly mixed
(17-27)
1 R
0.55, what value R required. Find R (including concentration
0.00050 &
polarization effect). From Eq (17-27), x p
xp
0.25446
1 R xn
xp
R x IN
1
0.353
17.D13. New problem in 3rd edition .035 NaCl
Rejection
1
1 .1
4.5
.261 1 .1
0.1 .261 1
x IN
x p → R
x IN
xp
x IN
x IN
x IN
0.035 0.0005
xp
xp
Rx IN which gives
0.035
.55 .0005
0.035 0.001
0.9935
b)
If
c)
If R° (inherent rejection coefficient with M = 1) for part b is R
0.992, what was value of
M that gave R 0.9869
MA 1
M CaseB
.
R Case B 1
1 R CaseA . Let A be highly stirred
RA R
M CaseA
xp
0.0016,
M CaseB
17.D14.
wB
0.55 , R
xpR
RT curve: y w
Feed
xp
0.035
M CaseA 1 R CaseB
1.0 1 0.9869
1 R CaseA
1 0.992
wB
1
xw
wB
43 (mole frac). Since x w ,IN
B
x IN
141.6
cal
0.9869
1.6375
43 x w
1 xw
1 42 x w
0.10, only need RT curve below 0.10. Create table and plot
xw
yw
0.10
0.08
0.05
0.03
0.01
0.0025
0.001
0.8269
0.78299
0.6935
0.571
0.3028
0.0973
0.0413
kcal
g 1000 cal
0.9 10.5
.55 .001
74.12 g
mol
0.1 9.72
10.5 kcal mol
10.42 kcal mol
431
C PB
0.625
1
1000
0.046 , C PW
74.12
CP,in
MW feed
xW , F MWW
a) Assume y P
and
C PL,in
0.9 0.046
xB , F MWB
1
1000
0.1 0.018
Tout where Tin
0.5 10.5
Tout
30
then,
x in
1
0.018
0.0435 kcal mol C
0.5 9.72
P
molar ratio. Slope Op line
18.016
0.1(18.016) 0.9(74.12)
0.5 to calculate λp
Tin
1.0
68.51
10.11
0.0435
10.11
30
0.129. This is a
6.75 , and op line goes through point (mole fractions)
0.10
0.775. Plot operating line. From graph, y P 0.57, x out
0.129
(mole fraction water). This value of yp is reasonably close to our assumption.
x out
0, y P
Fp / FF
( Fp MW p ) / ( FF MWF )
0.031
( MW p / MWF )
432
MWp
y p ,W MWW
y p , B MWB = 0.57(18.016) + 0.43 (74.12) = 42.13
.129(42.13 / 68.51)
Area
b)
Cut
Permeate Rate
0.08
x in,w
Then
P
Tin
c)
Tout
Flux
( 0.0791 100 lb h)
0.2 lb h ft 2
39.53 ft 2
0.10
1 cut
Slope
0.0791 in (lb/h)/(lb/h).
0.92
11.5. Find y P 0.68 from graph.
cut
0.08
0.32 10.5 0.68 9.72 9.97
C PL,in
x out
P
0.05, x P
FP Fin
P
30
0.08
0.0435kcal / (mol o C)
9.97 kcal mol
48.3 C
0.6935 (From RT table or graph).
x in
x out
0.10 0.05
yP
x out
0.6935 0.05
0.3065 10.5
0.6935 9.72
0.0777
9.959
433
Tin
Tout
C PL,in
17.D15. Parts b to h are new in 3rd edition
xP
0, x r,out
Fout
Fin
Fin
FP
Fin
Fout
1
0.0777
0.0435
RT curve:
xP
Fin x r ,in
FP x P
Mass balance perfectly mixed
Since
30 C
47.8 C
1 R M xr
0.
Fout x r ,out
x r,in
FP
0.8 . Then
Fin
Fin
Fin
Fout
1
x r ,out
0.10 0.125 , Fout 0.8Fin
0.8
Alternate graphical solution gives same result.
6.5
xP
9.959
1
0.8
80 kg h
Op. line
xP
-4
xr
x r,in 0.10
0.125
xr
x r,out
xP
1
RT curve
FP Fin
FP Fin
x r ,out
Slope
x r ,in
FP Fin
0.8
4
0.2
When x r,out 0, x P
x r,in
0.10
FP Fin
0.2
b. Area = Fp / Jsolv = (20kg/h)(1 L)/0.997 kg)(24h/day)/ (2500 L/m2 day) = 0.193 m2.
c. Gel formation occurs when x w = 0.5 and xw = M xout = 0.125 M. M = 0.5/0.125 = 4.0
d. Gel formation occurs when xw = 0.5 and xw = M xout = M xF / (1 – θ’) = 1.2 (0.1)/(1 – θ’)
Then 1 – θ’ = 0.12/0.5 = 0.24 and θ’ = 0.76.
e. Gel formation occurs when x w = 0.5 and xw = M xout = 1.2 xF / (1 – θ’) = 1.2 xF / (1 – 0.2).
Obtain xF = 0.333.
xr,out = xF / (1 – θ’) = 0.3333/0.8 = 0.416
f. We have xr,out = xF /(1 – θ’) = 0.20/0.75 = 0.26667. M = xgel / xr,out = 0.5/0.26667 = 1.875.
First occurs when Jsolv = 2500 = k ln (M). Obtain k = 3977 L/(m2 day) = 4.603×10-5 m/s.
g. M = 1.875 and k = 3977. Since we change the pressures, J changes which will change M. However
with constant stirring k is constant. First, assume no gel and calculate J and M.
pr pp
K
Jsolv
2500 L (m 2 kg)
L
J solv K solv
, solv
2083.33 2
t ms
t ms
p r pp
2.2 1.0 bar
m day bar
Then, without gel,
J solv
2083.33 3.4 1.0
5000 L m 2 d ay
From Eq. (17-34) M = exp (Jsolv / k) = 3.516.
434
0.5
0.2. Then, x w
3.516 0.2
Mx F
1
0.878, gel forms.
.8
0.2
xF
With a gel, previous work is incorrect. Set R = 1.0, x p = 0, x r
0.25,
1
.8
And from Eq. (17-45), Jsolv = k ln (xgel/xr) = 3977 ln (0.5/0.25) = 2756.6 L/(m2 day)
Note: The same answer is obtained in parts g and h if convert to J´solv and use k in m/s.
h.
J solv
k n
x gel
.5
k n
xr
Case C, R C
MB
x IN
xp
J solv
1 R C x out
K solv
pr
tms
1.387 152 1.1
m d ay
pr
pp
1 RB
pr
pp
a M C xout
Equation:
log P
log P
2446.6 L (m 2 d ay)
0.27027
1.0, p p,B
1.0 .061 14.1
.024 10.96
B
0.0007505]
1.1, p r,B
12.06
3.27
b
18.71 g m 2s
42 , P 10000,
1.6232
0.27875
1.9
4a b
4a b
1.9020 2b
b 0.95100 , a
0.16805 logP 0.951
log
0.27027
xp
b
a log 10, 000
8, log
C
0.0001,
a log 0.0001
log 1.9
.74
0.01230
15.446[ 3.27 .01230
log 42
0.5
n
0.2
0.2, x r
15.2
1 RC
pp
0.26, x F
0.976, M B
1.1, p r,C
17.D17. New Problem in 3rd edition.
a)
log
a log P b , P
b) If
L
2
0.0093 0.26
.74
1 .939
.26
0.0007505
1
1 RC
3977,
Case B, R 0B
.939, p p,C
For Experiment C. M C
x out
3977
xr
17.D16. a) New problem in 3rd edition
b)
k
Gel forms since it did previously,
.16805
0.90309
log
0.16805
0.28509
.951
0.16805
PO2
1.93 Barrers
435
17.D.18. New problem in 3rd edition. Ideal Gas: Vol% = Mole %
PN2
250, PCO2
FP
2700,
PHe
300, PHe
3
0.4 m3 s. FIN
FIN
550
1.0 m s
10 2 cm
10
3
106 cm3 s , FP
3
m
76 cm Hg
Part A
pr
2.5 atm
Part B
pr
76 cm Hg
t ms
0.8 mil
Eq. (17-11d)
10
190 cm Hg
atm
pp
0.4 76
.00254 cm
FP A
30.4 cm Hg
Need to guess value of FP A or of y P ,
Pi t ms p p
Since CO 2 has highest permeability, CO 2 will be concentrated; thus, guess y p,CO2
y r ,CO 2
Then
y p,CO 2 ,guess
1
FP A guess
Then,
PCO 2
y IN ,CO 2
1
t ms y p,CO 2
76 cm Hg
0.002032 cm
mil
Pi t ms p r
K m,i
pp
.4 106 cm3 s
yCO2,IN
0.4 and y IN,CO2
where
p r y r.CO 2
0.40
0.4.
p p y p,CO 2
Use FP A in Eq. (17-11d) to calculate all K mi
Then check
y IN,i
y r,i
1
K mi 1
1.0 ?
Put in Spread Sheet. Can use Goal Seek to force
Results: a. y P,N2
y r,N2
b.
.15037, y P,CO2
.3164, y r,CO2
.54446, yP,He
.3037, y r,He
y r,i
1.0 as change y P,CO2 .
.3351, yP,H 2
.06099, y r,H2
.3189
.27154,
.999885
1.0000766
Same answers for mole fractions since p r p p is same.
yF N2
F,cm3/s
pr, cm Hg
P N2
P He
Fp
yp CO2
Fp/A
K N2
K CO2
306 2008
HW 8
Problem 2
0.25
1000000
190
0.000000025
0.00000003
400000
change yp to
0.544455884
0.003983763
yF CO2
tm, cm
pp, cm Hg
P CO2
P H2
yF
0.4 He
0.002032 theta
76
0.00000027
0.000000055
get sum=1
yr CO2
A, cm 2
A, m 2
0.475237299 y r N2
1.792765611 yr CO2
0.05 yF H2
0.4
0.3
0.303696077
100407575.7
10040.75757
0.316417678
0.303696077
436
K He
K H2
0.549397235 yr He
0.851323363 yr H2
Goal seek
Sum
0.150373483
0.544455884
0.033509684
0.271546029
0.99988508
yp N2
yp CO2
yp He
yp H2
sum
0.060993544
0.318969314
1.000076613
17.E1. New problem in 3rd edition For dilute systems J solvent
Transfer Eq. (17-7c)
R
1
xp
x out
1
J total solution , FIN
Fp
xF
x out
0.022 0.056
FIN
xp
x out
0.00032 0.056
0.00032
0.9943 , J s u c rose
0.056
J solventx p
Fout , Basis: FIN
Fp
1.0
0.6106
J solvent
x
solution
p
Permeate
0.997 0.4 x p 0.997 0.4 0.00032 0.99713 kg L
Initial assumption is OK.
J solv J solv / solv (3.923 g / m 2 s) / (997 g / L) 0.003935 L / ( m 2 s)
permate
(3.923g / m 2 s)(0.00032)
J sucrose
b)
Eq. (17-27)
0.00126g / (m 2s)
1 xp
K water
water solute
K sucrose
x p pr
Mxr
pp
xp
Mxr
xp a
1 .00032 0.056 0.00032
w s
0.00032 60.0 1.1
From Eq. (17-16c),
K water
pr
c.
pp
a Mxr
59.895 1.0 .056
Eq. (17-18)
K sucrose
Solution 1.
R
1 M 1 R
Then RT equation is
xp
1 R x out
M xr
Operating Equation is (17-23)
xp
0.00032
xp
0.0706 g
0.00126
J sucrose
tms
g sucrose
xp
3.923
60 1.1
g water
J solv
tms
K water
t ms
0.056 0.00032 59.895
3.131
0.056 0.00032
xp
1
0.6393 x out
1
2.1 1 0.9943
m 2 s atm
0.0226
g sucrose
m 2s wt frac
0.98803
0.01197 x out
x out
xF
.39
.61
x out
0.022
0.61
0.036066
Solve RT & operating equation simultaneously. x out
0.05537 , x p
0.000663
437
Check
R
pr
t ms
60 1.1
0K
0.98803
x out
K water
J water
= 0.0706
xp
1
a M xr
pp
59.895[ 2.1 0.05537
0.00243 g (m2 s)
3.67 0.000663 / (1 .000663)
Alternatively, J sucrose
K sucrose
Mx r
t ms
3.67g/(m 2s)
0.000663]
J water x p / (1 x p )
J sucrose
J sucrose
xp
xp
0.0226[ 2.1 (0.05537) 0.000663]
0.00261
g
m 2s
6.9% different
xp xp
Solution 2. RT Eq. (17-21), x r
2.1 1
xr
Simplifies to,
Linearize x r @ x p
Slope =
3.140 59.895 0.997
0.0003
xr
0.02509
3.140 59.895 .997
1 xp
0.02509 . Note xp = 0.0003 is an arbitrary point.
0.01196
0.01196 x r or x p
Solve simultaneouly with Operating Equation
xF
1
xp
x out
0.6393 x out 0.036066
0.05538 , x p
1
2.1 391.66 x p
Then linear form of RT equation is x p
x out
3.140 .997 60 1.1
x p 186.5 x p 185.391
0.0003
xp
1
0.01196 x out
0.0006623 . Very close to value obtained with retention analysis.
C PL,in
FP
17.E2. (was 16.D11 in 2nd ed.) Eq. (17-59b):
Fin
Tin
Tout , Tin
Tout
85 25
60
P
Stage 1. Assume y P ~ .05 water, 0.95 ethanol
P
0.95
For Feed CPL,in
w
0.05
E
0.1 CPL,w 55 C
0.1 4.1915
2290.3 kJ kg (See Example 17-9)
0.9 CPL,E
0.9 2.7595
kJ
kg K
2.903
kJ
kg K
Where average temperature from 25 to 85 is 55ºC and C P values are from Perry’s 7th, pp. 2306 and pp. 2-237.
FP1
2.903
Fin
2290.3
60
0.0760 and FP1
0.0760 100
7.60 kg hr .
438
Op. line intersects y P
x out
1
Slope
Op. Eq. is, y P
0.10 (water wt. frac.)
x IN
1 0.760
12.16
0.0760
0.1
12.16 x out
12.16 x out 1.32
0.0760
If
y P 1, x out 0.32 12.16 0.0263
Plot Op. Line on Figure 16-17a and find intersection:
y P1 0.66, x out1 x 2,in 0.055 (water values)
Fout1
Fin 2
100 7.60
92.40 kg h
Stage 1 Trial 2. Since yp ≠ yp, assumed, do a second trial.
yP
0.66 water, 0.34 E,
FP1
2.903 60
F1in
1892
FP1
0.0921 100
w
0.34
9.21 kg h , Fout1
9.86 , y P
0.0921
0.086
If y P
0.66
E
0.66 2359
0.34 985
1892 kJ kg
0.0921
1 0.0921
Slope
P
100 9.21 91.79 kg h
0.1
9.86 x out
0.0921
9.86 xout
1.086
1, x out
0.00872
9.86
Plot operating line and determine (from graph)
y P1 0.64, x out1
x in 2
value of yp is close to the assumed value of 0.66. Can proceed to stage 2.
Stage 2: Estimate y P
For x in 2
2
0.50 (water),
0.050, CPL,in
FP2
2.967
Fin 2
1672
Fout 2
60
0.05 4.1915
0.50
.1065 90.66
1 0.1065
0.1065
1672
E
2.967
9.64 kg h
8.40
0.050
8.40 x out 0.4421
0.1065
0.4421 . Draw op. line. Intersection gives y P 0.34
For x out 2 use MB. x out 2 ,
8.40 x out
w
0.95 2.903
8.10 kg hr , Slope
90.66 9.64
0, y P
0.50
0.1065, Fin 2
yP
If x out
P
0.05 water. This
Fin 2 x in 2
Fout 2
FP2 y P2
90.66 0.050
9.64 0.34
81.00
x out 2 ,w 0.0155 or x out,2 ,ETOH 0.9845.
This is a close as we can get graphically.
9.21 0.64 9.64 0.34
Mixed Permeate: y p,mix
0.487 wt frac water
9.21 9.64
439
FP
Area
kg 1000 g
h
kg
J g h m2
, J from Fig. 16-17b based on x out
Stage 1
J
0.8333 g h m 2 , A1
Stage 2
J
0.208 g h m 2 , A 2
9.34 1000 g h
0.8333
9.64 1000
11, 208 m2
46, 346 m2
0.208
Other flow patterns will reduce area. Area is large because of low flux caused by low ethanol
permeation rate.
17.F1.
RT eqn., y
x x
1
1 x
x Benz
0.2,
18.3, y
x Benz
0.1,
6.66, y
Operating equation Slope
1
, x Benz
0.3,
18.3 .2
1 17.3 .2
6.66 .1
1 5.66 .1
.9
.1
16.6, y
16.6 .3
1 15.6 .3
0.87676
0.8266
0.4253 . Plot RT equation.
9 . Plot on graph. Find y PBenz ~ 0.844, x out,Benz ~ 0.238
440
P
CPL,in
y Pbenz
benz
1 y Pbenz
x Pbenxw CPLbenz
iP
0.844 94.27
1 x benz,in CPL ,iP
1 0.844 164
0.3 0.423
.7 0.73
105.15 cal g
0.6379 cal g C
441
Tin
Tout
P
C PL,in
50 C
0.1 105.15
66.48 C
0.6379
17.H1. (was 16.G1 in 2nd edition)
This is set up for Area being the unknown and cut being known. Problem 17.H1
Fr,in
10000.000000 yin,A
0.2500 cut=Fp/Fin
0.2500
tmem,cm
0.002540 pr,cm Hg
300.0000 pp,cm Hg
30.0000
yin,B
0.5500 P,A
0.0000000200
Fptot
2500.000000 yin,C
0.2000 P,B
0.0000000050
Fr,out
7500.000000
P,C
0.0000000025
Guess values of A or equivalently Fp/A until sum y,r and sum u,p are = 1.00
Fp/A
0.0007059 (this is final result)
KA
2.507328 KB
0.7720 KC
0.4015
sum x eq
y,r,A
0.181576 y,p,A
0.455271198
y,r,B
0.583244 y,p,B
0.450268647
y,r,C
0.235190 y,p,C
0.094429331 Area, cm2
3541578.1
sum y,r
1.000010 sum y,p 9.999692E-01
These results agree very well with Geankoplis’ results.
17.H.2. New problem in 3rd edition Part a)
y p 0.5243, y r,out 0.0610, A
b)
y p,avg
0.6193, y r,out
3, 200,152 cm 2
0.0203, A
2, 636,196 cm 2
17.H3. New problem in 3rd edition
Counter –current. Shows final guess for theta.
Fin,
cm3/s
100000 yin
0.209 thetatot
PA/tms
0.003905 pr, cm Hg
114 pp, cm Hg
M
15 N
100 yroutguess
df
0.9
j=N-i+1
Fr
yp
yr
Area
Fp
Fp/Fr,j-1
yp
Areatot
yincalc
Fincalc
Massbal
yrout
100
28600
0.173174301
0.144051968
9710.750234
714
0.024356963
0.235015561
824015.8215
0.208999973
100000
9.09495E-13
0.144051968
99
98
29314
30028
0.1738615 0.174547
0.1447613 0.14547
9664.4075 9618.879
1428
2142
0.0475556 0.069677
97
30742
0.1752323
0.1461768
9574.1438
2856
0.0907935
0.714 PB/tms
76
0.2 erroracc
0.00175
0.0000001
96
95
94
31456
32170
32884
0.175916 0.1765981 0.17727918
0.146883 0.147588 0.14829195
9530.183 9486.978 9444.50995
3570
4284
4998
0.110973 0.1302761 0.14875885
442
17.H4. New problem in 3rd edition The spread sheet equations are shown below for part b. Part a agreed
with problem 17.D14. Part b answers: yp,W = 0.412, θ = 0.2122, xout,W = 0.0160, θ’= 0.158, Area = 79.0 ft2. Note that if the starting guess for yp,W is too high, Goal Seek will converge
on an answer with yp,W > 1, which is obviously not physically possible.
17.H5.
This problem is very similar to Example 17.7. It is easiest to solve on a spreadsheet, which is
shown below. The results are shown in the spreadsheet.
New problem in 3rd edition
443
444
17.H6. New problem in 3rd edition The spreadsheet is similar to that for problem 17.H5 and is shown
below,
17.H.7. The same spread sheet that was used in problems 17.H5 is used.
445
446
SPE 3rd Edition Solution Manual Chapter 18.
New Problems and new solutions are listed as new immediately after the solution number. These new
problems are: 18.A3, 18.A16, 18.B4, 18.C4, 18.C14, 18.D3, 18.D8, 18D9, 18D14, 18D15,
18D18, 18D21, 18D24, 18D25, 18.D29, 18.D30, 18.F1, 18.H1-18.H2. Chapter 18 was chapter
17 in the 2nd edition. Most problems from that edition have the same problem number, but the
chapter number is now 18 (e.g., problem 17.D6 is now 18.D6).
18.A1.
1c; 2 b; 3a
18.A.2.
1c; 2a; 3b
18.A.3. New problem in 3rd edition. One barrier is lack of knowledge. Most chemical engineers are not
trained in use of adsorption, chromatography, and ion exchange. Thus, they do not think of these
processes as a potential solution. A second barrier is the simulation tools are not as developed and widely
available as the simulation tools for equilibrium staged separations such as distillation.
18.A4.
Regeneration is too difficult.
18.A5.
In the SMB the mass transfer zone between the two solutes stays inside the cascade. In a
chromatograph the MTZ exits the column and must either be completely separated,
which requires a significant amount of desorbent, or recycled appropriately.
18.A7.
d
18.A.8. New problem in 3rd edition. The LUB approach assumes constant pattern behavior. Linear
systems do not have constant pattern behavior.
18.A9.
18.A10.
d
e
18.B.4. New problem in 3rd edition. There are obviously many possibilities. One is to develop sorption
processes that use an energy separation processes (e.g., pressure or temperature) to produce purge or
desorbent from the feed so that a separate purge or desorbent does not have to be added.
18.C1.
T
1
e
Vavailable
P
B
18.C4.
e
1
e
1 f cry
1
e
1
P1
clay
P
e
e
e
P4
1
P1
f
f cry
P2
1 f cry
f cry
1
cry
1
e
P2
f cry
P2
P1
K di Vcol.
1 f cry
f
f cry
f
P2
(same as 18-3b)
rd
New problem in 3 edition.
Amount in mobile phase = e (Vol. Col. Segment)
Amount in pores = 0
(no pores)
Amount exchanged
Δz A c cRT Δy K DE
No 1
Obtain, u ion
e
c
e
Δz a c Δx cT
term because c RT is equivalent/L
ε e Δz A c Δx c T v int er
ε e Δz A c c T Δx Δz A c c RT Δy K DE
v int er
Simplify to, u ion
(18-44)
c RT y
1
K DE
x
ecT
445
18.C7.
CA
1
C AF
2
z uAt
1 erf
4E eff t u A
v inter
12
Sketch of break through:
erf (a)
.9 a
1.164
95%
t final
5%
tw
t st
t1
erf (a)
At 5% point,
0.90 a 1.164
1.164
L
4E
t st u A
v
12
Or
let
u A t st
2.328 E t st
x1
12
st
t , uAx
2
1
uA
12
x2
By definition,
Use
u A t final
uA
v
12
12
L u A t st
v
2.328 E
12
u 1A2
v1 2
x1
2.328
L
2
0.
E u At
v
4Lu A
2u A
2.328
Let
L
4E t final
E 1 2 u 1A2
2.328
v1 2
x1
1.164
and at 95%,
12
fin
t , then x 2
t MTZ
t final
t st
x 22
E 1 2 u 1A2
v1 2
2.328 2 E u A
v
2u A
4L u A
x12
sign for both (has to be to have positive times).
446
4u
2
A
4u
2
A
x
2
2
x
2
1
2
2.328 E 1 2 u 1A2
v
v
2
12
2.328E 1 2 u 1A2
2.328 E 1 2 u 1A2
2
v
t MTZ
x
2
2
x
2
1
E uA
4L u A
2.328
12
2
4L u A
v
2
E uA
v
E uA
v
E uA
2.328
2
2.328
v
2.328E 1 2 u 1A2
v1 2
4
2
12
2.328E 1 2 u 1A2
2
12
v
2.328
2.328
2
E uA
v
4L u A
4L u A
4L u A
4u 2A
2
If
4L
2.328 E
v
t MTZ
2 2.328 E
12
v1 2 u A
18C9. New problem in 3rd edition.
For Figure 18-7B, In
L
In – Out = Accumulation
t vinter A c CT,after x i,after
Out
Accumulation
very reasonable since E is usually small ,
t vinter A cCT,before x i,before
LA c yi,after
yi,before CRT
LAc x i,after CT,after
Note that C RT is constant. After dividing both sides by
v int er x i ,afterC T ,after x i ,beforeC
L
C RT y i ,after
y i ,before
x i,before CT,before
t A c , mass balance is
T ,before
L
x i ,afterC T ,after x
t
t
For Figure 18-7B with a total ion wave,
L
u total ion v int er
t
The first and third terms in the mass balance cancel each other. Thus,
L
C RT y i,after y i,before
0
t
Which requires,
yi,after yi,before
C
i ,before
T
, before
18.C10.
447
1
A
v1
2
v2
v2
F
v3
3
B
u A ,i
C A ,i L i
u A1
M 1A u port
vF
u BL
C B,i Vi
u B2
M 2 B u port
v B,prod
u A3
M 3A u port
vD
u B4
M 4 B u port
v3
v4
v4
4
v A ,prod
v1
CB v2
M 2B u port
CA v2
C A v3
M 3A u port
CA v 2
vF
M 3A u port
CA M 2B
If all
18.D1.
Rearrange:
vD
(2)
M 3A u port
CB
M 2B
CB
v4
M 3A
CA
v1 where v 4
u B4 CB
v1
Thus
(1)
M 2B u port
vF
u port
vD
CB
CA vF
Subtract eq. (2) from (1),
Then
CA
u A1 CA
M 4B u port CB
M1A u port CA
M 4B u port
M 1A u port
M 4B
M 1A
CB
CA
CB
CA
M 1A
CA
M 4B
CB
M 3A
CA
D
vD
F
vF
Mi
1.0,
M 4B
CB
D
F
pA
1
qA
q MAX
1
CB
pA
1
CA
1
q MAX K A
1
CB
1
CA
vf
M 2B
CB
M 3A
CA
1.0
. Plot p A q A vs. p A
448
296 K
p/q
135.863
278.679
478.666
696.073
939.619
1116.143
1189.735
p
275.788
1137.645
2413.145
3757.6116
5239.9722
6274.1772
6687.8589
480 K
p/q
1786.943
1709.129
1974.657
2309.538
2778.150
3011.134
3122.979
p
637.7598
1296.2036
2378.6716
3709.3486
5329.6030
6246.5981
6687.8589
At 296 K
At 480 K
Intercept
Slope
KA
0.163636
1
q max
, q max
1 q max
0.163636
1 q max K A
80
80
1
Intercept
q max K A
6.1125
0.00204545
Slope
KA
1380
0.260606
1
q max K A
1
, q max
q max
1 q max
0.260606
1 q max K A
1380
3.8372
0.00018884
449
18.D2.
L soln
a = 22 liter soln/kg ads = 22
1 kg
kg ads 1000 g
b = 375 liter soln/g mole anthracene = 375
q max K A,c C A
q
L
a
0.022
K A,C
2.104
L
g ads
1 mol
mol 178.22 g
, thus, K A,C
1 K Ac C A
q max
0.022
b
0.10456
2.104
2.104
L
g ads
L
g anth
g anth
g ads.
18.D.3. New problem in 3rd edition.
v inter
uj
Part a
1
1
e
p
1
Kd
e
v super
K ij
, u AN
40
1 0.69
5.671 cm min
1782 0.00301
Time AN = L/uAN = 25/5.671 = 4.408 min
40
u DN
5.474, time
1 0.69 1782 0.00316
u
c.
40
e
1 0.69 1782K j
b.
u AN
u DN
HETP
2
u S,AN
L N
L u S,DN
4.576
5.567
4Ru
N1 2
From (18-83)
104.33
u S,AN
N 10885
0.002297 cm
2
From (18-81),
2
width at half height
5.54 peak max N
To find width in time units, peak max is in time units = retention
L u S,AN 4.40864 min , width 0.09946 min
d.
time
0.425 width 1/2 height
t
18.D4.
p
s
e
40
uj
, vinter
1
e
v sup er
10.0
v int er
0.43
e
23.26
0.042271 min
cm
min
v int er
a) u s
1
1
e
p
e
us 0
1
Kd
1
1
e
e
(18-15c)
p
s
Kx T
f
23.26
0.6027 cm min
0.57 .48 1.0
0.57 0.52 2100
17.46
0.43
0.43
684
t br 200 cm 0.6027 cm min 331.8 min
450
b) Assume wall heat capacity is small:
v int er
u th
1 e 1
1 e
1
p
e
u th
1.636
t th,br
c) K x
t br
M.B.in
10.0
e
23.26
.57 .52 2100 2000
C ps
F
C pf
5.911
cm
min
23.26
1.23 g g @80 C , u s 80
200 cm 5.4868
cm
min
A c cm 2
331.8 min 0.684 g cm 3
10.0 A c 0.684
331.8 33.84 .0011
Alternate: Eq. (18-24)
C 80
C 0
0.0011 g tol
g fluid
33.84 0.0011
2.611 Cconc → C conc
us 0
1
u s 80
0.0011 113.92
5.4868 cm min
1.636 2.603
36.45 min , see figure.
1
C 80
s
.43
684 1841
200 cm 5.911 cm min 33.84 min
out
Simplifying:
p
1
u th
1
u th
36.45 33.84 C conc
297.96 .0011
1
0.6027
1
5.4868
2.611
1
5.911
1
5.911
0.1255 wt frac.
113.92
0.1253 wt frac . A very considerable amount of concentration occurs.
451
80º, C = 0
z
usol (80ºC)
uth
0.0011
C=0
0.0011
331.8
min
0.0011
t
Cconc
33.84
36.45 min
0.1255
Cout
0.0011
0
33.84
18.D5.
36.45
vsuper 20 cm min
vint er vsuper e 20 0.4 50 cm min
For step input w. unfavorable isotherm, get a diffuse wave.
v int er
Langmuir formula: u s
1 e 1 p
1 e
a
1
Kd p
s
1 bc
e
e
But now
us
1
b
.6
1.01 .54
.4
0
50
.6 .46 1.124 kg
1.2
.4
liter 1 0.46 c
time, min
2
0.46
c,g/l us, cm/min
18.2437
0
16.676
0.25
14.794
0.50
12.565
0.75
9.997
1.00
7.1813
1.25
1.50
4.3499
2
1.81
50
0.93067
1 0.46 c
2
tout = L/us, min
2.741 min
2.998
3.3797
3.979
5.002
6.9625
11.4944
452
18.D6. a)
f
u th
1
1
e
p
f
C p f v int er
1
C pf
e
u th
.57
1
.5
.43
C ps
e
.684 2240
.57
.5 920 1.80
.43
50 cm 12.61 cm min
v int er
1
e
p
e
c)
p
If wall effects are negligible,
0.684 2240 30
b) t thermal,br
u s 300K
1
e
Kd
1
1
e
e
p
K xy
s
W
C pw
eAc
12.61 cm min
3.965 min
30
.57
.57
1
.5 1.0
.5 12.109
.43
.43
u s 350K
6.5298 K xy
t br 300K
50 3.0964 min . Exits at c F
3.0964 cm min
4.423 in same eqn.
0.010 .
453
At t = 20, start hot, t br,hot
Feed is concentrated.
C 350
C 300
50 12.61 20
1
u s 300
1
u th
C 350
0.010 3.2989
t
1
u s 350
20 L u s 350 K
1
u th
23.965 min
1
3.0964
1
12.61
1
6.5298
1
12.61
3.2989
0.032989 g L . This continues until breakthrough at
20 50 6.5298
27.6572 minutes
0.032989
18.D6.
g/L
0.010
0
t
18.D7.
vint er
vsuper
16.1478
15 0.434
e
1
1
e
p
Kd
1
tr
L us
(A)
p
s
K 4
e
34.56
0.566 0.43
0.566 0.57 1.0
0.434
60 cm 0.3715 cm min
161.49 minutes. Then exits at C F
1
e
e
1
27.6572
34.56 cm min
v int er
a) At 4ºC: u s
us 4 C
23.965
0.3715 cm min
1820 0.08943
0.434
161.49 min . Concentration out is zero from t = 0 to t =
0.01 .
454
v int er
b) u th
1.
1
e
p
1
1
e
e
e
C ps
s
C pf
f
WC pw
e
A c C pf
f
34.56
17.293 cm min ,
0.566 0.43 0.25 1820
0.434
1.00 1000
60.0 17.293 3.4696 min +1200
u th
1.743
t br,th
p
L u th
Eq. A but with K(60º)
u s 60 C
34.56
0.720258 cm min
0.566 0.43
1.743
1820 0.045305
0.434
t br,conc 60 L u s 60
60.0 0.720258 83.3035 min +1200
C=0
60º
60
60º
z
0º 60º
C=0
uth
Elution time: 0
c high 60
chigh
cF
CF
1
us 4
3.4696
1
u th
0.01 2.6918 0.05783
83.3
C high
1
u s 60
1
u th
1.38839 0.05783
18.D.8. New problem in 3rd edition. Example 18-3: vinter,F
0.3799 cm min , u s v inter,purge,0 C
u th vinter,purge,
6.466 cm min , u s vinter,purge,80 C
If t purge
t purge
0.019796 kmol m3
18.60 and yinter,purge
u s vinter,F, 0 C
u s v inter,F, 80 C
C=0
25.58
18.60
25.58 cm min .
0.3799
0.5225 cm min
4.343 cm min
18.60
4.343 3.158 cm min
25.58
hot purge time and t F is cold feed time, with
t hot wave breakthrough
vinter,purge
18.56 min (from Example 18-3) then breakthrough
equation is u s v Inter,F, 0 C t F u s v Inter,purge,0 C t
thermal,breakthro
ugh
120 cm
455
120
tF
0.5225 18.56
290.35 min
0.3799
The next feed input at 290.35 + 18.56 = 308.91 min. This starts a cold thermal wave at
v Inter,F , u th v Inter,F
4.701 cm min which breaks through in another 25.53 min for total time
to cold breakthrough of 308.91 + 25.53 = 334.44 min.
The solute is hot, first at v Inter,purge u s 80 , v Inter,purge
18.60
u s 80 ,v inter,F
3.158 cm min after 18.56 minutes. Next solute step is
4.343
25.58
u s vinter,purge, 80
t
Exit Time Solute
18.56
u s,F 80 , vinter,F
120 4.343 18.56
tF
4.343 cm min and then
t purge
t
3.158
120
12.47 min
290.35 18.56 12.47
334.44
Since Exit Time Solute
entire time.
t
321.38 min.
breakthrough cold wave, the solute is at 80°C the
Solute exits from 290.35+18.56=308.91 min to 321.38 minutes = 12.47 minutes & it exits at
superficial velocity of 8.0 cm min .
Mass Balance
All solute in = Solute out
t F vsuper A c c IN t out vsuper A c c out,AVG
tF
c out ,AVG
t out
290.35
c IN
0.0009 wt frac
12.47
0.02096 wt frac.
This is same as peak concentration in Example 18-3, but greater than x out,avg 0.00748. To
have same concentrations need to recycle the material exiting at feed concentration in counterflow system. NOTE: Counter flow system has advantages of not contaminating the product end
of the column and typically has less spreading of the zone.
18.D.9. New problem in 3rd edition. a.
e
vinter
vSuper
e
u s,feed,M
e
1
e
p
Kd
0.05 m s. vinter
v inter
1
e
1
p
s
RTK A,p
0.5 0.43
0.1163 m s
0.01712 m s
from Eq. (18-27) is same as Example 18-4, M 0.2128
Pressurization Step
Feed end (for pressurization) 0.75m (Measured from closed product end)
M
z after
which is 0.75 0.5584
y M after
0.003
0.75 m
4.0 atm
0.2128
1.0 atm
0.1916 m from feed and
4.0
0.5584 m
0.2128 1
1.0
0.001007
Feed Step
u sfeed
0.01712 m s
7 sec
0.11984 m
0.1916 m for pressurization step
= 0.3114 m. Does not breakthrough in first cycle. From 0 to 0.11984 m, concentration is y F .
456
Blowdown.
Measuring from closed top, z before
z after
0.4386 m
0.2128
1.0
0.5890 m
4.0
The far end of the feed wave does not get removed from the bed.
0.11984 or 0.75 0.11984 0.6302 m from closed end has
z after
1.0
0.6302
0.4386
0.75 0.3114
0.2128
0.8463 m, so it all exits. The mole fraction of this portion is
4.0
y after
1.0
0.2128 1.0
0.003 2.9781 0.00893
4.0
Part of the feed that was pressurized also exits during blowdown.
This z after
y feed
The close wave
1.0
0.2128
1.3431 z before
z before 0.5584 m from closed
4.0
(product) end. This is 0.75 0.5584 0.196 m from feed end. This gas entered at an unknown
pressure between p L 1.0 and p H 4.0. Can calculate this pressure from Eq. (18-28c)
0.75
p before
z before
p after
z after
1
z before
y after,press
0.003
y after,BD
0.001007
0.5584
4.0
4.0
1 0.2128
1.00003 atm
0.75
0.2128 1
0.001007
1.00003
This gas is depressurized to 1.0 & exits column
1
After Pressurization Step.
0.2128 1
0.00300 or essentially the feed composition.
4
Exit from Col
y
0.008933
0
.0030
time
Part b. Want z after blowdown
0.75, then z before
z after
p after
p before
0.2128
1.0
z before 0.75
0.5584
4.0
from closed end, which is 0.75 0.5584 0.1916 m from feed end. Want the feed to end at this
point. During constant pressure feed step, feed travels u s,feed t F 0.01712 t F . Then for
pressurization step z after (from feed end)
0.1916 0.1712 t F . From closed end this is
457
0.5584 0.1712 t F
0.5584 0.1712 t F
z after
z before
0.75
p after
p before
0.2128
4
0.5584 or t F 0.
1
Thus, need a purge step if have feed step at constant pressure for complete cleanout.
1
18.D10. a)
pt.10 : z after
y after
0.4,
0.002
Travels,
0.2128, p before
A
3.0
0.4
0.2128
0.5
0.2128 1
3.0
0.000876
1.015128
0.4 m
25.126s 1.0s for blow-down
0.01592 m s
b) Start with Arbitrary point at t = 1 sec (end repress) z after
3.0
.48
.2128
2.4763 atm , y after
0.002
26.126s
0.48 (.02 from feed end)
1
p before
1.05128 atm
3.0
0.2128 1
0.00172
.5
2.4763
Dist. Traveled @ t = 30s: 0.02 + 0.01592 × 29s = 0.48168 m
For blow-down: distance from closed end = 0.01832 cm
z after
0.01832
Purge: u M,purge
0.5
0.5
.2128 1.0
0.026824 , y after ,BD 0.00172
0.007048
3.0
3.0
0.01751 m s . Exits bottom column during purge (point 11)
(distance traveled)/upurge
18.D11.
.2128
31 s +
0.5-0.026824
0.01751
58.023s
If repressurize with product, bed remains clean.
Feed step is same as to point 3 (at 0.462 m from feed end) on Figure 18-13.
Blowdown then pt. 4 (0.056 m from top) and purge exits at pt. 8 (56.36s)
Product gas is cleaner (y = 0), but there is lower productivity – less feed per cycle.
See Figure.
458
BD
3
4
y=0
y=0
y = 0.0082
8
18.D12. a) The clean bed receiving feed has a shockwave for Langmuir isotherm.
320 cm 3 min
v sup er
vsup er
r2
A c , where A c
6.366 cm min , vinter
vsup er
4 cm
2
50.2654 cm 2
6.366 10.434 14.669 cm min
e
v int er
u sh
1
1
e
p
Kd
1
p
s
e
e
q
q after
q before
c
c after
c before
c after
1
e
where c before
50 mol m 3 , q after
q
c
0, q before
0.190 50
1 0.146 50
0
1.1446 mol kg
14.669
u sh
1
0.566 0.57 1.0
0.566 0.43
0.434
0.434
t br
L u sh
1.1446
1820
50 cm 0.5843 cm min
0.5843 cm min
50
85.579 min
Outlet concentration is zero until t br then becomes 50.
Concentrated solution eluted by dilute soln. Gives diffuse wave for Langmuir isotherm.
v
u s u diffuse
1 e 1 p
1 e
a
1
K
p
d
p
2
1 bc
e
e
us
1
0.566 0.57 1.0
14.669
0.566 0.43 1820
0.19
0.434
0.434
1 0.146 c
2
1.74336
14.669
193.92
1 0.146c
2
Create Table.
459
18.D13.
A
c
50, u s
3.218, t
L us
50 3.218 15.537 min
c
0, u s
0.07497 cm min , t
c
40, u s
2.491, t
20.071 min
c
30, u s
1.737, t
28.779 min
c 15, u s
0.7052, t
70.898
c
0.2205, t
226.80
5, u s
de xtran, B
L us
666.93 min
fructose
(1)
CA v1
u A1
M1u port
CB v 2
u B2
M 2 u port (2)
C A v3
u A3
M 3 u port
CB v 4
u B4
M 4 u port (4)
(3)
v F,sup er
1000 cm 3 min
, vF
2
40
e
4
CB vF
Solve eqs. (2) and (3) simultaneously, u port
CB
M2
M3
CA
v2
v3
1
CA
1
1
e
e
v2
v3
v4
KA
1
.6
1
0.23
.4
M1
CA
M2
CB
u port
u port
0.97
0.7435
0.99
0.4914
1
3.03175 cm min
M 4 u port
1.03 3.03175
CB
0.4914
KB
60
3.03175
0.4914
L t sw
19.791 min
6.1079 cm min ; V2,sup er
0.7435
1
.6
1
.69
.4
e
3.03175
CA
V1,sup er
e
3.955 cm min : V1,sup er
1.01 3.03175
Recycle flow
1
3.03175
M 3 u port
1.9894 cm 3 min
1
0.7435 , C B
0.4914 1.9894 cm min
0.4914
0.99
1.01
0.7435
L
t sw
u port
u port
v1
Vol Feed
D2
4
v F , v F,super
v1
D2
e
4
1988.176 cm 3 min
3070.15 cm 3 min
4.1184; V3,sup er
2070.14 cm 3 min
6.3547; V4,sup er
3194.19 cm 3 min
1988.176 cm3 min
460
D
V4,sup er
Check:
3194.19 1988.176 1206.0 cm3 min ,
V1,sup er
VD
D
VF
F
V4
V1
VF
F
V2
Extract Product
V4
M 1 u port
CB
CA
vF
M2
V3
M1
CB
CA
CB
M3
CA
.97
.4914
.7435
1.2060 , OK
.4914
.99
1.01
.7435
V1 3070.15 1988.18 1081.97 cm 3 min
3194.19 2070.14 1124.05 cm3 min
18.D.14. New problem in 3rd edition. From Eq. (18-40c) K K
KK
Anderson’s data:
1.2060
F
1.03
.4914
D
Raffinate Product
M4
M4
CB
D
2.9 1.3
H
H
KK
Li
KH
Li
2.2308
DeChow’s data:
K K H 2.63 1.26 2.0873
For the shockwave Eq. (18-46) holds for K+
Since resin is initially in H+ form, x K,before CK,before CT 0 and y K,before
a)
x K,after
CK,after CT
y K,after
CR ,K,after CRT
CR ,K CRT
0.
1.0
1.0
v inter
u sh ,K
y K ,after
1 C RT
K DE ,K
x K ,after
e CT
1
25 0.42
u sh ,K
y K ,before
x K ,before
L
44.84 min
1
2.2
1 0
u sh
1
1.0
0.42 0.1
1 0
Same for both sets of data since K K H does not enter into equation when initial and feed
contain only one ion.
b) C t 1.0, u Sh,K 9.542 cm min , t sh 5.24 min
c)
Ct
1.0, x K,before
yK
Anderson’s Data: y K ,before
y K ,after
0.2, x K,after
0.85. y K values depend on equilibrium parameter.
K KH x K
1
K KH 1 x K
2.2308 0.2
1
2.2308 1 0.2
2.2308 0.85
1
1.115 cm min, t sh
2.2308 1 0.85
0.3580
0.9267
461
u sh
25 0.42
1
2.2
1
0.42 1.0
1.0
0.9267 0.3580
0.85 0.2
10.662 , t K
L u sh
4.69 min
DeChow’s data:
y K ,before
y K ,after
2.0873 0.2
1
0.3148
2.0873 1 0.2
2.0873 0.85
1
0.9220
2.0873 1 0.85
25 0.42
L u sh 4.95 min
10.100 , t K
1
2.2
0.9220 0.3148
1
1.0
0.42 1.0
0.85 0.2
4.69 4.95
% difference
100 5.55%
4.69
d) There is a difference if either initial or feed contains both ions. System with higher
K K H had higher shock velocity.
u sh
v
18.D15. New problem in 3rd edition. Part a. u sh ,i
y i,after
1 c RT
K DE
x i,after
e cT
1
For both
Na & K ,
x i,after
y i,before
y i,after
t center
0
1.0
v
u i,sh
1
y i,after
1 c RT
K DE
x i,after
e cT
y i,before
x i,before
For both Na+ and K+: xbefore = 0.4 and xafter = 0.9. For Na+
K Na H xNa
(2.0 / 1.3)(0.4)
y Na ,before
1 ( K Na H 1) xNa 1 [(2.0 / 1.3) 1](0.4)
y Na , after
x i,before
25 0.42
5.186 cm min
1
2.2
1
0.42 0.5
L u sh 50 5.186 9.64 min
Thus same u sh , u sh
Part b.
x i,before
y i,before
K Na
H
1 ( K Na
H
xNa
1) xNa
(2.0 / 1.3)(0.9)
1 [(2.0 / 1.3) 1](0.9)
0.506
0.933
462
v
u sh ,Na
y Na ,after
1 c RT
K DE
x Na ,after
e cT
1
L / ush , Na
t Na
50 / 5.98
(25 / 0.42)
1(2.2)(1.0) 0.933 0.506
1
(0.42)(0.5)
0.9 0.4
y Na ,before
x Na ,before
5.98
8.36 min .
For K+ we obtain,
y K ,before
y K , after
KK
H
1 (KK
H
KK
H
1 (KK
H
u sh ,K
Part c.
1) xK
L / ush , K
(2.9 / 1.3)(0.9)
xK
1) xK
v
50 / 7.054
(25 / 0.42)
1(2.2)(1.0) 0.953 0.598
1
(0.42)(0.5)
0.9 0.4
y K ,before
x K ,before
7.054
7.09 min .
1 c RT
dy
K DE
dx
e cT
dy Na
K Na
dx Na
1
dx Na
t Na
K Na
1
L u shNA
KK
1
1
0
xK
KK
K Na
x Na
dy K
.9
Li
KH
Li
KH
Li
Li
2
1 x Na
25 0.42
1 2.2
1
0.955
.42 0.5
u Na
5.409
KK
1 xK
H
xK
2
1
KK
0.855, u K
Li
Li
KH
KH
Li
Li
2
1 xK
25 0.42
1 2.2
1
0.855
.42 0.5
5.979
H
2.0 1.3 1.538,
u Na
3.477,
t Na
14.38 min
0
KK
xK
2
0
dy Na
dx K
K Na
H
2.9 1.3 1 .5
dx Na
1
0.955,
2
2.9 1.3
dy
dx
2
9.244 min
dx K
x Na
1 x Na
H
2.0 1.3 1 .5
dy K
x Na
K Na
H
2.0 1.3
dy Na
Part e.
0.953
1 [(2.9 / 1.3) 1](0.9)
v
u
1
Part d.
0.598
1 [(2.9 / 1.3) 1](0.4)
y K ,after
1 c RT
K DE
x K ,after
e cT
1
tK
(2.9 / 1.3)(0.4)
xK
H
2.9 1.3
2.231,
uK
2.442,
tK
20.47 min
0
.9
463
dy Na
1.538
dx Na
1
dy K
0.538 .9
2.231
dx K
1
0.502,
2
1.231 .9
0.698, u
2
7.159, t Na
Na
uK
6.984 min
tK
9.5075,
5.259 min
Part f. The velocities and hence the derivatives are equal. Thus,
K Na
dy Na
dx Na
1
K Na
KH
Li
KH
Li
Li
KK
dy K
Li
2
1 x Na
dx K
1
KK
Li
Li
KH
KH
Li
Li
1 xK
2
With xNa = xK. The result from a spreadsheet is x = 0.35056
18.D16.
vint er
vsup er
15 0.40
e
MW p
f
37.5 cm s
28.9 g mol 50 kPa
1.0 kg
0.5832 kg m 3
3
m kPa
1000 g
298 K
mol K
q
kg toluene kg carbon
. Then, shockwave velocity is
is in
c
kg toluene kg air
v int er
RT
u sh
0.008314
1
1
e
p
1
Kd
1
e
e
e
q
y
s
f
37.5 cm s
u sh
1
0.6 0.65 1.0
0.6 0.35
0.4
0.4
1500 kg m 3 q 2
0.5832 kg m 3 y 2
q1
y1
37.5 cm s
u sh
For
1.975 1350.308
q2
y2
u sh ,1 : y1
0, y 2
0, q1
u sh 2 : y1
y2
u sh 2
q1
y1
0.0005, q 2
37.5
u sh ,1
At
p
2000 0.0015
1 2200 0.0015
L min
0.47619
0.104976 cm h
0.69767
37.5
0.69767 0.47619
1.975 1350.308
0.0015 0.0005
L min : u sh1t
1 2200 0.0005
0.00002916 cm s
0.47619
1.975 1350.308
0.0005
0.0005, q1 0.47619
0.0015, q 2
2000 .0005
0.00012539 cm s
0.451393 cm h
u sh 2 t 10 h where t is in hours.
464
Solve for
u sh 2 10
t
0.451393 10
13.03 h
0.451393 0.104976
cm
L min u sh1 t 0.104976
13.03 h 1.368 cm
h
Thus, for any column of partial length we will see a single shockwave exit the column.
v sup er 21.0
18.D17. v int er
52.5 cm s
0.4
e
pV n RT
u sh 2
v
Cinit
Since
u sh1
MW n
MW p
28.9 50
V
RT
1000 g kg 0.008314 298
C F , Get 2 diffuse waves
v int er
us
1
1
e
p
Kd
1
1
y
0.0010
0.00075
0.00050
2nd wave (0.00050)
0.00025
0.00
where
1
e
e
us
p
s
e
f
52.5
0.6 0.35
.6
0.65 1.0
0.4
0.4
q
u s cm s
y
195.31
0.0001991
284.799 0.0001365
453.515 0.00008573
- add
20 hours
832.466 0.00004671
2000
0.00001914
us y
0.5383 kg m 3
0.001
q
y
q
2000
y
1 2200y
2
52.5 cm s
q 1.975+1350.23 q
y
y
t L u s 25 u s
1500
0.583
125,581s = 34.8835 h
183,117.6s = 50.866 h
291,596.6s = 80.999 h
100.999 h
535,250.5 = 148.681 + 20 = 168.681 h
1285937.96 = 357.205 + 20 = 377.205 h
0.00075
0.00025
z
us y
us y
0
0
0.005
t
2
us y
0.0005
465
80.999
34.88
0.001
50.866
0
0.00075
0.0005
c
·
100.99
·
168.88
0.00025
t
18.D.18.
Part a.
. New problem in 3rd edition.
u S,G 11.12 S cm min is calculated in Example 18-9.
20
0.61 1.0 0.88
u S,F
1 0
8.416 , u
From Eq. (18-93), N
4Ru u S,G
From Eq. (18-78a)
N
Part b.
1
u S,F
2
L v E eff
u S,F
2
9.771
2
229.465
L
2 229.465 5.0 cm 2 min
2N E eff
v
114.73 cm
20 cm min
tG
L u S,G
114.73 11.25 10.20 min
tF
L u S,F
114.73 8.416 13.63 min
Part c. Eq. (18-80a),
K Ag
Li
t
L
1
uS
N
13.63 min
t ,F
K AgK
uS,G
0.39
L
18.D19.
377.2
KK
a) Ion wave: u total con
Li
vint er
8.5 2.9
vsuper
1/ 2
,
10.20 min
t ,G
229.465
1/ 2
0.673 min
1/ 2
1
229.465
2.93 , y Ag
e
1
3.0 0.4
Breakthrough of ion wave, 50 cm 7.5 cm min
0.900 min
2.93 x Ag
1 1.93 x Ag
7.5 cm min
6.667 min
466
b) Shock wave,
v int er
u sh
y Ag after
1 C RT
KE
x Ag after
e CT
1
before: x Ag
0 . after: x Ag
y Ag
7.5 cm min
1 2.0 1.0 1.0
u sh
1
0.4
1.2
1.4516 cm min , t sh
7.5 cm min
1 2.0
2.93
1
1.0
0.4 1.2
1 1.93 x
1.0, u s
1
x Ag
0.5, u s
x Ag
0, u s
1.0 .
y Ag
v int er
1 C RT
dy
KE
dx
e CT
1
x Ag
x Ag before
L
50 cm
u sh
1.4516 cm min
34.44 min
1.0
c) Diffuse wave: u s
u s,Ag
y Ag before
7.5
12.208
2.93
v int er
1
2
Ag
3.0965
K Ag -K
1 C RT
KE
e CT
1
1
cm
min
K Ag
1 x Ag
K
2
7.5
12.208
1 1.93 x Ag
L
, t out
us
2
7.5
50
1.8021 , t out
12.208
1.8021
1
3.86
7.5
L
0.5678 cm min , t out
13.208
us
2
16.147 min
27.745 min
50
0.5678
88.0555 min
From spreadsheet:
xAg
1
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
18.D20.
u_dif,Ag
3.097163211
2.852615804
2.598940969
2.337763116
2.071284133
1.802351071
1.53450084
1.27196632
1.019637556
0.782936124
0.567638906
t_dif,Ag
16.14380534
17.5277722
19.23860549
21.38796684
24.13961427
27.74154314
32.58388572
39.3091764
49.0370324
63.86217015
88.08416667
Was 18D23 in 2nd edition. Table 18-5, K CaK
a.) c RT
2.0 eq L , c T
0.02 eq L , x Ca
K CaK C RT
0.6183 2.0
CT
0.02
Column: L
75 cm, vsuper
61.83
K Ca
K K Li
0.8 at t
5.2
Li
2
2.9
2
0.6183
0.
shockwave .
20 cm min ,
vinter
20 .4
50 cm min
467
p
Feed:
u sh
0,
0.4, K E
e
v int er
, before: x Ca
C RT K E y
1
x
e CT
from Eq. (18-43) y Ca
u sh
1.0
50
1
2.0 0.971965
1
1.0
0.4
.02
0.8
x Ca
K Ca C RT
CT
0.8
0.971965
75
0.16407 cm min , t br
b.) Regenerate: at 500 min → Ion wave at vint er
New
0 , after: x Ca
0, y Ca
u sh
50 cm min takes
75
50
457.1 min
1.5 min.
1.2366 y Ca unchanged. Use Eq. (18-43) with new value K Ca C RT CT .
0.9689677 . Obtain diffuse wave.
3
v imter
dy Ca 1.2336 1 y Ca 1 x Ca
u diffuse
where
3
C RT K E dy Ca
dx Ca
1 x Ca 1 y Ca
1
C T e dx Ca
(Wankat, 1990, Eq. (9-25b)).
dy Ca
50
At x Ca 0,
1.2366, u Ca
6.96088 cm min
1.0
2.0
dx Ca
1
1.2366
0.4 1.0
75 cm
t out
10.7745 min (slow wave)
6.96088
At x Ca 0.96897, and y Ca 0.971965
dy Ca
3
1.2336 0.028035
dx Ca
0.03103
3
1.96897
0.908386
1.971965
50
9.022 cm min , t out
2.0 1.0
1
0.908386
1.0 0.4
At x Ca 0.5, y Ca 0.534927
75
u Ca
dy Ca
1.2336 0.465073
dx Ca
u Ca
.5
3
18.D.21. New problem in 3rd edition.
vF
u port
, C Tol
M2 M3
C Tol
1.5
8.312898 min (fast wave)
0.97013
1.534927
50
2.0 1.0
1
0.97013
1.0 0.4
Cy
3
9.022
75
8.546 cm min , t out
8.546
8.776 min . (in-between)
1
1
1
e
p
e
Kd
1
1
e
0.132234
p
K Tol 300
e
468
0.0061 e 2175.2696 300
K Tol 300 K
C xy
1
vF
.95
.10007
0.6479 v F 0.6479 cm min , L u port t SW 64.79 cm
1.05
.132234
0.95 .6479
C xy
6.1447 cm min , v3 v 2 v F 5.14476
0.10017
0.6479
C Tol
.95
4.6547
0.132234
v2
M 2 u port
v1
M1 u port
v4
M 4 u port C xy
1.05 0.6479
v Tol prod
v2
v1
6.7914
0.10017
6.1447 4.6547 1.4900
v xy,prod
v4
v3
6.7914 5.14476 1.6466
Check: vOut
18.D22.
0.10017
1.63627 0.68930 12.1092
u port
vD
E eff
v sup er
0.0105 e 2115.1052 300 12.1092
8.5972 , K xy 300 K
v4
v1
6.7914 4.6547
v tol prod
ED
v xy,prod
u s2
dp
6 k M,c
20 cm 3 min
cm
us
1 0
v
1
2
3.1366 , v total in
K
2
1
K
2.035
D F
2.1367
vD
3.1367
vF
, where
6.366 cm min ,
15.915
e
2.1367,
dp
1
6 k m,c
k m,c a p
v sup er
v
OK.
15.915 cm min
7.821 cm min
e
E eff
0.15
Eq. (17-69) X
cm
7.821
min
2
0.6 0.69
5.52 min
C
1
CF
2
Argument of erf, a
1
0.4
2
8.063 cm 2 min
z ust
1 erf
4 E eff u s t
v int er
12
for step up
200 7.821 t
15.849 t
12
469
Step down:
1
X L, t 8
L u s t 8u s
1 erf
2
12
4 E eff u s t 8
v int er
323.04 7.821 t
Argument of erf , a
15.849 t
Total Solution X X
L
If t
25.573 min
us
X
If t
X
1
1
and X
2
L 8u s
2
2
1.998
4
X
31.2835
a
341.89
12
1
2
0.979235 0.0084
cF
See also Problem 18.G1.
cF
1
2
0.499 c
1.44473, erf a
12
1
2
50 0.970835
Cinitial
1 .983186
1
.998
24.975 .
0.95847
e
p
Kd
1
CF1 X z, t 17.5
e
1
e
CF1X z, t 28
1.63627 0.68930 12.1092
0.132234
p
K Tol 300
e
8.5972 , K xy 300 K
1
0.0084
48.54
1
0.0061 e 2175.2696 300
C xy (300K)
0.999
0.983186 , X
Cinitial
Tol
K Tol 300 K
c
2.773, erf
0.979236
0.970835 , c
18.D23. Was 18D24 in 2nd edition. Cout
12
532.13
468.663
1.95847
25.0 (for smaller t, can ignore X )
63.96
31.2765
29.575, a
1.69189, erf a
18.D.24. New problem in 3rd edition.
vF
u port
, C Tol (300K )
M2 M3
1
C
C
0.50 or c
1 2, a
0, X
c
xy
0 , c cF
7.358
12
279.6
For higher t, X = 1.0,
0.999
Peak at 25.575
12
123.03
0, a
1 1.000
33.575, a
us
1
a
126.792
0.0105 e 2115.1052 300 12.1092
0.10017
470
vF
u port
.90
.10007
1.4812 v F
1.10
.132234
M 2 u port C xy (300K)
v1
M1 u port C Tol (300K)
v4
v2
v1
vD
v4
Check: vOut
v4
v1
13.3084 cm min , v3
0.10017
1.4812
.90
10.0812
0.132234
13.3084 10.0812
v3
v tol prod
v xy,prod
v2
vF
12.3084
16.2655
0.10017
16.2655 12.3084
16.2655 10.0812
148.12 cm
3.2272
1.10 1.4812
M 4 u port C xy (300)
v xy,prod
u port t SW
0.90 1.4812
v2
vTol prod
1.4812 cm min , L
3.9571
6.1843,
7.1843 , v total in
vF
D F
vD
6.1843
7.1843
OK.
18.D.25. New problem in 3rd edition.
Zones 2 & 3 are same as in 18.D.24 since at 300 K
u port 0.6479 v F 0.6479 cm min , L u port t SW 64.79 cm
v2
6.1447 , v3
v1
M1 u port CTol 273 K
M1
5.14476
0.5 and M 4
and v 4
M 4 u port C xy 350 K
2.0 (reciprocal values).
K Tol 273K
0.0061 exp 2175.2695 273
17.612
K xy 350K
0.0105 exp 2115.1052 350
4.423
1
C Tol 273K
1
C xy 350K
v1
0.2135
1.63627 0.68930 4.423
0.5 0.6479 0.07259
vTol prod
0.07259
1.63627 0.68930 17.612
v2
4.4627 , v 4
1.6820 , v xy prod
v1
v4
v3
2.0 0.6479 0.2135
0.9260 , v D
v4
v1
6.0707
1.608
D / F 1.608
18.D26. a)
N
u sD
2
4Ru s
u sA
1.0
1 5.8
u s,B
, R
0.147059 , u
v
1.5 , u s A
1
1
1.0
s
KA
6.5
0.15385
0.15045
471
4 1.5 0.15045
Need N
b) t R ,A
t ,A
CA
C A ,max
17689 , L
0.0067873
L
884.45
uA
0.15385
L
1
uA
N
5748.88
95.813 min
t
tR
2
2
t
2
exp
0.05 N
884.45 cm.
95.813 min
12
exp
t,min
CA CA,max
12
1
0.7204 min
17689
t 95.813
2 0.7204
2
p
2
90
92
94
95
95.813
96
97
7.27E-15 8.3E-7 0.0421 0.52898 1.00 0.9669 0.2573
CA
0.33 X A L, t
CF
18.D27.
18.D28. a) u p
2
25.0 cm
L t center
35.4 min
b) Large-Scale system
1.0 0.33 X A L, t
1 .55 X A L, t .8t F
0.55 0 X A L, t
0.706 cm min , L MTZ,lab
u pt MTZ
t MTZ, LS
d 2p ,LS D eff
1.0
t MTZ,lab
d 2p ,lab D eff
0.12
t MTZ,LS
Independent of velocity
0.4t F
69.44 2.8
tF
0.706 2.8
1.9774 cm
2
69.44
2
194.44 min
v super
u p ,LS
e
u p ,lab
LS
v super
e
lab
12
4
9
3
→ u p,Ls
0.706
4
3
0.941 cm min
lab
L MTZ,larg e scale u p t MTZ
0.941 cm min 194.44 min 183.03 cm
For frac. bed use = 0.80 & symmetrical pattern,
0.5 183.03
0.5 L MTZ
L
457.6 cm 4.576 m , t br t center
1 Frac bed use
1 .8
t center
457.6
L up
486.27 min , t br
486.27
194.44
0.941
2
This is length of feed time if column is completely regenerated.
18D.29. K CaK
a.) c RT
K Ca
5.2
Li
K K Li
2
2.9
2.5 eq L , cT
2
t MTZ
2
389.05 min .
0.6183
0.03 eq L , x Ca
0.7 at t
0.
472
K CaK C RT
0.6183 2.5
CT
0.03
Column: L
p
Feed:
u sh
90 cm, vsuper
0,
e
shockwave .
51.525
25 cm min ,
0.39, K E
y Ca
(1 y Ca )
25 / .39
64.10 cm min
1.0
v int er
, before: x Ca
C RT K E y
1
x
e CT
from Equilibrium,
vinter
0, y Ca
0 , after: x Ca
K Ca K C RT
x Ca
CT
(1 x Ca ) 2
2
0.7
400.75
Solve this for unknown y value. I used a spreadsheet.
yCa 0.95128
u sh
64.1
1
2.5 0.95128
1
1.0
0.39
.03
0.7
b.) Regenerate: Ion wave at vint er
New
K CaK C RT
(0.6183)(2.5)
CT
1.1
0.22000 cm min , t br
35.0 / 0.39
1.4057 y Ca
old y and with new value K Ca C RT CT 400.75
,
find x Ca
90
409.10 min
u sh
89.74 cm min takes
90
1.003 min.
89.74
0.95128 unchanged. Use equilibrium with
y Ca
(1 y Ca )
2
K Ca K C RT
x Ca
CT
(1 x Ca ) 2
to
0.94251 . Obtain diffuse wave.
3
v imter
dy Ca 1.4057 1 y Ca 1 x Ca
u diffuse
where
3
C RT K E dy Ca
dx Ca
1 x Ca 1 y Ca
1
C T e dx Ca
(Wankat, 1990, Eq. (9-25b)).
dy Ca
89.74
At x Ca 0,
1.4057, u Ca
9.7631 cm min
1.0
2.5
dx Ca
1
1.4057
0.39 1.1
As an alternative can do numerical calculation of derivative. At x = 0, y = 0. x = 0.001, y = 0.001404 and
y / x (0.001404 0) / (0.001 0) 1.404 , which is reasonably close.
90 cm
9.22 min (slow wave)
9.7631
At x Ca 0.94251, and y Ca 0.95128
t out
dy Ca
dx Ca
1.4057 0.04872
0.05749
3
3
1.94251
1.95128
0.85169
473
89.74
15.049 cm min , t out
2.5 1.0
1
0.85169
1.1 0.39
From equilibrium, at the arbitrary value x Ca 0.5, y Ca
u Ca
dy Ca
1.4057 1 0.55544
dx Ca
3
.5
3
1.5
15.049
5.981min (fast wave)
0.55544
0.95282
1.55544
89.74
2.5 1.0
1
0.95282
1.1 0.39
u Ca
90
13.695 cm min , t out
90
13.695
6.572 min .
This is in-between the other two waves.
c. To not have a diffuse wave must have
K CaK C RT
(0.6183)(2.5)
CT
CT
1.0
This requires CT > 1.546.
18.D30. New Problem in 3rd edition. K K
H
KK
Li
KH
Li
DeChow’s data:
K K H 2.63 1.26 2.0873
a.) This will be a shock wave since K+ is more concentrated in the feed to the column than it
is initially and KK-H > 1.
v inter
u sh ,K
y K ,after
1 C RT
K E ,K
x K ,after
e CT
1
Ct
1.0, x K,before
yK
y K ,before
y K ,after
u sh
tK
0.2, x K,after
1
0.85. y K values depend on equilibrium parameter.
K KH 1 x K
2.0873 1 0.2
2.0873 0.85
1
x K ,before
K KH x K
2.0873 0.2
1
y K ,before
2.0873 1 0.85
0.3148
0.9220
25 0.42
0.9220 0.3148
1.0
0.85 0.2
1
2.2
1
0.42 1.0
L u sh 49.5 min
All three times are the same for the shock wave.
10.100 cm/min,
474
b.)
This will be a diffuse wave since K+ is less concentrated in the feed to the column than it
is initially and KK-H > 1.
v inter
u diffuse,K
1
dy K
1 C RT
K E,K
dx K
e CT
dy K
2.0873
K KH
(1 ( K KH
At xK = 0.15, dxK
u diffuse,K
25 / 0.42
2.2(1) dy K
1
(0.42)(1.0) dx K
1) xK )
2
25 / 0.42
2.2(1) dy K
1
(0.42)(1.0) dx K
1.543
[1 (1.0873)(0.15)]2
59.524
dy
1 5.238 K
dx K
59.524
1 5.238(1.543)
6.554cm / min
Thus, at xK = 0.15, tK = L/udiffuse,K = 500/6.554 = 76.29 min. Then at xK = 0.5 we obtain
dy K
2.0873
K KH
(1 ( K KH 1) xK )
59.524
u diffuse,K
dy
1 5.238 K
dx K
dxK
2
0.876
[1 (1.0873)(0.5)]2
59.524
10.65cm / min
1 5.238(0.876)
Thus, at xK = 0.5, tK = L/udiffuse,K = 500/10.65 = 46.94 min. Then at xK = 0.8 we obtain
dy K
dxK
u diffuse,K
K KH
(1 ( K KH
59.524
dy
1 5.238 K
dx K
1) xK ) 2
0.5970
59.524
1 5.238(0.597)
14.42cm / min
tK = L/udiffuse,K = 500/14.42 = 34.67 min.
18.D31. New problem in 3rd edition. a.
vSuper
10
vint er
10 .4
25,
e
0.4,
L
30.0
475
c RT
2.4,
1.10,
KK
2.9
Na
1
25
y K ,after
1 c RT
K DE
x K ,after
e cT
y K ,before
b.
u sh,exp t
c.
L MTZ
L t center
u sh t MTZ
1 0
1 0
7.75 min . , t center ,measured
7.31 min
7.31 7.75
100
6.00%
7.31
30 7.31 4.10 cm min .
4.10 7.57 7.06
Frac. bed use (symmetric wave)
L MTZ l arg e scale
1 2.4
1.0
.4 1.1
1
x K ,before
3.783 cm min, t center,exp ected
% error
d.
1.45
2.0
v int er
u sh ,K
u sh,K
cT
L MTZLab
2.093 cm
1 0.5 L MTZ L
d 2p v Super D eff
16 d 2p
l arg e scale
d 2p v Super D eff
0.965
d 2p
Lab
Lab
Lab
200 D eff
L MTZ,Lab
100 D eff
With same beads assume no change in D eff .
L MTZ,larg e scale
16 2 2.093 cm
frac bed use
1 0.5 L MTZ L 1 0.5 66.98 200
t center
Breakthrough start time
v inter,large scale
u sh
u sh ,lab ,exp tl
v inter,lab scale
Breakthrough start time
0.5 t MTZ
L u sh
2580 ft 3 , h=2580/860=3ft.,
End
View
0.833
0.5 L MTZ u sh
8.2
[200 0.5(66.98)] / 8.20
18.F1. New problem in 3rd edition. Constraints: w L
wLh
66.98 cm
860 ft 2
p0
20.31min
T max 500 C
6 atm
932 F
88.14 psia
73.14 psig
Weight vessel
Di
ts
L
0.8 D i t s
Seider etal,
s
Eq.16 59
h
w
Seider etal. (2004), Eq. (16.61)
476
Pd
exp
0.60608 0.91615
n p0
0.0015655
n p0
2
96.66 psig
Wall thickness
tp
(Eq. 16.60)
s
Relate w to h.:
2SE 1.2 Pd
2 13,100 1
3.7057E 3 D i
1.2 96.66
490 lbm ft 3 0.284 lbm in 3 p. 529 (Seider et al, 2004)
cos
cos
90
D
96.66 D i
S 13.100 psi p. 529 with SA-387B steel, E = 1.0
where
Weight
Pd D i
3.7057E 3 D
0.5h
1.5
3
r
0.5w
r
w
D
w
r
D
D
cos 90
860
D cos 90
cos
D in ft. (In Spreadsheet A cos
cos
1
1
cos
3 D
cos
0.8D
3D
3
1
D
3.7057 E 3 D 490
1
In Spreadsheet, angle is in radius
90
2
D
Weight
Width
L
3.5 33655
1.80
477.0
3.7 31358
2.17
397.1
3.8 30735.9 2.33
368.7
3.9 30325.
2.49
345.1
4
30070.31 2.65
325
4.1 29933
2.7947 307.7
4.2 29889
2.939 292.6
4.3 29918
3.08
279.2
6
35103
5.196 165
8
44837
7.42
115.96
10 56197
9.54
90.15
12 68940
11.62 74.02
14 83144
13.67 62.88
Goal seek L = 60
D = 14.64 ft Weight = 88052.75 Width =
14.333 L = 60
From Seider et al, p. 527: Cp
Cv
(Eq. 16.53) horizontal
(Eq. 16.55)
CpL
From p. 531, Fm
Fm C v
Bare module factor, FBm
CBm
0.20294
2
118,323 → Cp
1.0 in 2000
Cp
144, 711 in mid 2000
118323 2724 121047
3.05 for horizontal
Cp Fm
Absorbent: p. 553 Cp
0.04333 n w
2724
1.2 for low-alloy steel, C v
Installed Cost: Calc C p with Fm
0.054266 ft
CPL in mid 2000 (MS = 1103)
exp 8.717 0.2330 n w
1580 D
ts
1.0, 2000
$60 ft 3 , Cp
3.05
1.0 1.0 1.2
60 2580
1
$393, 400
$154,800
477
18.G1. Was 17G1 in 2nd edition. Figures are labeled 17G1.
478
479
480
18.G2.
Was 17G2 in 2nd edition.
a.) With QDS with 50 nodes find t center
t MTZ
18.G3.
6.0 3.13
4.52 min
2.87 min
Was 17G3 in 2nd edition.
Find
D F 1.0. D 141.55 E R
CA 0.343 and CB 0.219
Eq. (17.31a)
u port
a)
vF
M 2B
CB
e
t sw
141.55 cm 3 min
v1,int er
v1,sup er
Dc
2
4
0.4
10
2
4
4.5057 cm min
4.5057
1
0.219
L u port
CA vint er
Recycle Rate
M 3A
CA
F
vF
u port
F.
u A1
2.7295 cm min
1
0.343
50 2.7295 18.32 min
M1u port
2.7295 cm min
2.7295
7.9577 cm min
0.343
0.4 v1,int er 3.18308 cm min
3.18308
10
2
4
250 cm 3 min
Obtained raffinate = 96.6% and extract = 94.3%.
b) One approach is to keep a symmetric cycle.
Then D = 283.1 and
E F
E R
212.325
2
Flow optimizer can be used to give t sw ~ 9.1 and Recycle rate ~ 500. Depending on
values obtain raffinate and extract > 97%.
18.G4.
Was 17G4 in 2nd edition. Figure below is labeled 17G4.
18G5.
Was 17G5 in 2nd edition. Figure below is labeled 17G5.
481
482
483
18.G6.
Was 17G6 in 2nd edition.
a.
k m,a p
1.5 min1 , L
25.0 cm
484
v sup er
20.2 ml min
Eq. (18-66)
2.0 m 2 4
6.366 cm min
6.366 cm min
19.1
1.5 min -1
Satisfied, but close. Thus some bypasses but most undergoes equilibration.
18.G7.
25.0 cm < 4.5
Was 17G7 in 2nd edition. Figure is labeled 17.G7.
485
18H1. New problem in 3rd edition. Spreadsheets with numbers and formulas shown.
486
487
18.H.2. New problem in 3rd edition. The spreadsheets are shown on the next pages. They are based on
the previous, but includes both a step up and a step down. Because of the quirk in Excel not
allowing negative arguments, it was set up with multiple solution paths. The correct solution
occurs when there are numbers.
Time, min
15
20
22.5
25
C
0
.0134
1.798
24.96
25.5726 27.5
25.0
30
33.575
42.32 48.52 24.97
35
37.5
11.13 1.114
40
.040
488
489
490