Subido por isam_asis

L-Series-Backboxes-in

Anuncio
I56-5100-000
INSTALLATION AND MAINTENANCE INSTRUCTIONS
3825 Ohio Avenue, St. Charles, Illinois 60174
800/736-7672, FAX: 630/377-6495
www.systemsensor.com
L-Series Back Boxes
GENERAL DESCRIPTION
The L Series surface mount back boxes are designed to fit System Sensor
L-series devices. They provide a hard surface mounting option for surfaces
such as concrete and brick. Models are available in wall and ceiling mounting
formats, red and white color options and by device type see below for specific
model numbers and descriptions.
MODEL REFERENCE
The L series surface mount back boxes include a grounding plate and grounding screw for electrical grounding and threaded knockout holes for ¾ inch
conduit adapters. (See Figure 1.)
INSTALLATION
Refer to the System Sensor device manual for specific installation and mounting instructions.
Model
Description
Color
SBBRL
Wall Surface Mount Back Box, 4x4 Horn, Strobes
and Horn Strobes
Red
SBBWL
Wall Surface Mount Back Box, 4x4 Horn, Strobes
and Horn Strobes
White
SBBGRL
Wall Surface Mount Back Box, 2x4 Horn, Strobes
and Horn Strobes
Red
SBBGWL
Wall Surface Mount Back Box, 2x4 Horn, Strobes
and Horn Strobes
White
SBBCRL
Ceiling Surface Mount Back Box, Horn, Strobes,
Horn Strobes, Speakers and Speaker Strobes
Red
SBBCWL
Ceiling Surface Mount Back Box, Horn, Strobes,
Horn Strobes, Speakers and Speaker Strobes
White
SBBSPRL
Wall Surface Mount Back Box, Speakers and
Speaker Strobes
Red
SBBSPWL
Wall Surface Mount Back Box, Speakers and
Speaker Strobes
White
FIGURE 1. SURFACE MOUNT BACK BOX
Grounding screw and
grounding plate
Grounding screw and
grounding plate
Grounding screw
and grounding plate
Knock-outs
Knock-outs
Knock-outs
A0524-00
Grounding screw and
grounding plate
A0525-00
Knock-outs
System Sensor® is a registered trademark of Honeywell International, Inc.
1
I56-5100-000
©2016 System Sensor. 09-01
Descargar