Subido por Javier Caparros

S5700 Series - Quick Start Guide

Anuncio
S1700, S2700, S3700, S5700, and S6700 Series
Switches
Quick Start Guide
Issue
03
Date
2023-10-26
HUAWEI TECHNOLOGIES CO., LTD.
Copyright © Huawei Technologies Co., Ltd. 2023. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior
written consent of Huawei Technologies Co., Ltd.
Trademarks and Permissions
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective
holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and
the customer. All or part of the products, services and features described in this document may not be
within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements,
information, and recommendations in this document are provided "AS IS" without warranties, guarantees
or representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Huawei Technologies Co., Ltd.
Address:
Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website:
https://e.huawei.com
Issue 03 (2023-10-26)
Copyright © Huawei Technologies Co., Ltd.
i
S1700, S2700, S3700, S5700, and S6700 Series
Switches
Quick Start Guide
Contents
Contents
1 Packing List............................................................................................................................... 1
2 Installing the Device............................................................................................................... 2
3 Connecting Cables................................................................................................................... 5
4 Powering On the Device........................................................................................................ 7
5 Logging In to a Device for the First Time.......................................................................... 8
Issue 03 (2023-10-26)
Copyright © Huawei Technologies Co., Ltd.
ii
S1700, S2700, S3700, S5700, and S6700 Series
Switches
Quick Start Guide
1 Packing List
1
Packing List
Packing box contents:
●
Chassis (with the product model on the nameplate)
●
Power cable: If the switch uses a built-in power module or is delivered with a
pluggable power module, the power cable is delivered with the switch. In
other cases, the power cable is delivered with the power module.
●
Installation accessory package: The accessory package may contain the
ground cable, mounting brackets, screws, dust plugs, rubber pads, and the
Documentation Roadmap & Qualification Card. Floating nuts and M6 screws
need to be prepared by the customer.
Issue 03 (2023-10-26)
Copyright © Huawei Technologies Co., Ltd.
1
S1700, S2700, S3700, S5700, and S6700 Series
Switches
Quick Start Guide
2 Installing the Device
2
Installing the Device
Overview
For details about the precautions and requirements for device installation, see
"Preparing for Installation" in the Hardware Installation and Component
Replacement.
S series fixed form-factor devices are available in different dimensions (H x W x
D). The installation scenarios and methods vary depending on the dimensions.
This document describes the main device installation scenarios: cabinet mounting,
desktop mounting, and wall mounting. For details about installation of remote
units (RUs) or in other scenarios, refer to the Hardware Installation and
Component Replacement.
Cabinet Mounting
Devices of different dimensions can be installed in a cabinet using mounting
brackets, horizontal rack-mounting kits, or trays. This document describes how to
install a device using mounting brackets, which vary according to the dimensions
of the device. Use the mounting brackets delivered with the device.
1.
Use M4 screws to attach mounting brackets to the device.
2.
Install floating nuts on the mounting rails of the cabinet.
3.
Install the device in the cabinet.
Figure 2-1 Installing a device in a cabinet using front mounting brackets
Issue 03 (2023-10-26)
Copyright © Huawei Technologies Co., Ltd.
2
S1700, S2700, S3700, S5700, and S6700 Series
Switches
Quick Start Guide
2 Installing the Device
Figure 2-2 Installing a device in a cabinet using front and rear mounting brackets
Installation videos:
(Video) Using Front Mounting Brackets to Install a Fixed Switch in a Cabinet
(Video) Using Front and Rear Mounting Brackets to Install a Fixed Switch in a
Cabinet
Desktop Mounting
1.
Attach four rubber pads to the bottom of the device. (For some models,
rubber pads or integrated foot pads have been installed before delivery. In this
case, you do not need to install rubber pads.)
2.
Place the device gently on the desk.
3.
(Optional) Install a security lock to lock the switch to the desk.
Issue 03 (2023-10-26)
Copyright © Huawei Technologies Co., Ltd.
3
S1700, S2700, S3700, S5700, and S6700 Series
Switches
Quick Start Guide
2 Installing the Device
Wall Mounting
Depending on device dimensions, the device can be installed on a wall using
mounting brackets or without using mounting brackets.
Using mounting brackets:
1.
Use M4 screws to attach front mounting brackets to the device.
2.
Use a hammer drill with a φ8 drill bit to drill holes on the wall, and mount
the device on the wall with expansion bolts.
Figure 2-3 Wall mounting a device (using mounting brackets)
Without mounting brackets:
1.
Mark holes on the wall based on the distance between the two mounting
holes on the rear panel of the device, and install mounting screws.
2.
Align the mounting holes on the rear of the device with mounting screws and
hang the device on the mounting screws.
Figure 2-4 Wall mounting a device (without using mounting brackets)
Issue 03 (2023-10-26)
Copyright © Huawei Technologies Co., Ltd.
4
S1700, S2700, S3700, S5700, and S6700 Series
Switches
Quick Start Guide
3 Connecting Cables
3
Connecting Cables
After installing the device, connect the ground cable, power cable, management
cable, and service cables to the device.
Issue 03 (2023-10-26)
Copyright © Huawei Technologies Co., Ltd.
5
S1700, S2700, S3700, S5700, and S6700 Series
Switches
Quick Start Guide
3 Connecting Cables
NOTE
The device in the preceding figure is for reference only. The actual port positions and cables
vary depending on the device model.
Issue 03 (2023-10-26)
Copyright © Huawei Technologies Co., Ltd.
6
S1700, S2700, S3700, S5700, and S6700 Series
Switches
Quick Start Guide
4
1.
4 Powering On the Device
Powering On the Device
Before powering on the device, ensure that:
–
The power cable has been properly connected.
–
The input voltage is normal. (For the operating voltage range of the
device, see the Hardware Description of the corresponding product.)
2.
Turn on the external power supply to power on the device.
3.
Check the device after powering it on.
When the device is operating properly, the power indicator is steady green
and the SYS indicator blinks green slowly.
Issue 03 (2023-10-26)
Copyright © Huawei Technologies Co., Ltd.
7
S1700, S2700, S3700, S5700, and S6700 Series
Switches
Quick Start Guide
5
5 Logging In to a Device for the First Time
Logging In to a Device for the First Time
You can log in to a device for the first time through the console port or web
system. The login method to use depends on the device model and software
version. This document briefly describes the key steps and information for logging
in to a device for the first time through the web system.
NOTE
First login to a device is not involved on plug-and-play unmanaged models and RUs.
Logging In to the Device for the First Time Through the Web System
Only a device with factory defaults can be logged in through the web system for
the first time. To log in to a device through the web system, connect a PC to the
device according to the table below, configure the IP address of the PC to be in the
same network segment as the default IP address of the device, and access the
default IP address of the device in a browser by entering https://ip-address.
The table below uses V200R022C00 and V600R023C00 as an example. You can
also obtain the default IP address and method for logging in to the web system
for the first time from the nameplate at the bottom of the device.
Issue 03 (2023-10-26)
Copyright © Huawei Technologies Co., Ltd.
8
S1700, S2700, S3700, S5700, and S6700 Series
Switches
Quick Start Guide
5 Logging In to a Device for the First Time
Produ
ct
Series
Default IP
Address for
the First
Login to the
Web System
Description
S1700
192.168.1.253
● S1720-GW, S1720-GWR, S1720GW-E, S1720GWR-E,
S1720-GF, S1720GFR-P
– Connect a PC to any Ethernet electrical port of
the switch.
– Default IP addresses: IP address of VLANIF 1
– At the first login, you need to set the username
and password for logging in to the device.
● S1730S-S1
– Connect a PC to any Ethernet electrical port of
the switch, and hold down the MODE button for
more than 6 seconds. When all mode indicators
are steady green, the switch enters the initial
configuration mode.
– Default IP addresses: IP address of VLANIF 1
– At the first login, you need to set the username
and password for logging in to the device.
● S1720-X
– Connect a PC to the ETH management port on
the switch.
– At the first login, you need to set the username
and password for logging in to the device.
● S1730S-S and S1730S-H: Two methods are
available:
– Method 1: Connect a PC to the ETH
management port on the switch.
– Method 2: Connect a PC to any Ethernet
electrical port of the switch, and hold down the
MODE button for more than 6 seconds. When all
mode indicators are steady green, the switch
enters the initial configuration mode. The default
IP address is the IP address of VLANIF 1.
– At the first login, you need to set the username
and password for logging in to the device.
Issue 03 (2023-10-26)
Copyright © Huawei Technologies Co., Ltd.
9
S1700, S2700, S3700, S5700, and S6700 Series
Switches
Quick Start Guide
5 Logging In to a Device for the First Time
Produ
ct
Series
Default IP
Address for
the First
Login to the
Web System
Description
S2700,
S5700,
and
S6700
runnin
g
V200
192.168.1.253
Three methods are available:
● (Recommended) Method 1: Connect a PC to the
ETH management port on the switch.
● Method 2: If the switch has only optical ports,
connect a PC to the ETH management port using
an Ethernet cable. Hold down the MODE button for
6 seconds or longer. When all mode indicators on
the switch are steady green, the switch enters the
initial configuration mode.
● Method 3: If the switch has Ethernet electrical ports
but does not have an ETH management port,
connect the PC to the first Ethernet electrical port
of the switch, and hold down the MODE button for
6 seconds or longer. When all mode indicators on
the switch are steady green, the switch enters the
initial configuration mode.
● At the first login, you need to set the username and
password for logging in to the device.
S5700
and
S6700
runnin
g
V600
192.168.1.253
Models with the MODE button and running
V600R023C00 and later versions:
● Connect a PC to the ETH management port on the
switch. If the switch does not have an ETH
management port, connect the PC to the first
Ethernet electrical port.
● Press and hold down the MODE button for at least
6 seconds. When the MST indicator is steady green,
the system configures a default IP address for
VLANIF 4092.
● At the first login, you need to set the username and
password for logging in to the device.
Models without the MODE button or running a version
earlier than V600R023C00:
● No default IP address is configured for web login.
Therefore, you cannot log in to the switch for the
first time through the web system.
● Log in to the switch through the console port and
run commands to configure the IP address and
interface for logging in to the switch through the
web system.
● Enter https://ip-address:port in the address box of
the browser to log in to the device.
Issue 03 (2023-10-26)
Copyright © Huawei Technologies Co., Ltd.
10
S1700, S2700, S3700, S5700, and S6700 Series
Switches
Quick Start Guide
5 Logging In to a Device for the First Time
Produ
ct
Series
Default IP
Address for
the First
Login to the
Web System
Description
S3700
runnin
g
V600
None
● No default IP address is configured for web login.
Therefore, you cannot log in to the switch for the
first time through the web system.
● Log in to the switch through the console port and
run commands to configure the IP address and
interface for logging in to the switch through the
web system.
● Enter https://ip-address:port in the address box of
the browser to log in to the device.
For details about the login method and requirements, see the configuration guide
of the corresponding product and version in Table 5-1.
Table 5-1 Configuration guide links
Product Series
Configuration Guide (for Commonly Used
Version)
S1700 unmanaged
switches
Unmanaged switch models, requiring no
configuration
S1700 web-managed
switches and fullymanaged switches
S1700 V200R022C00 Web User Guide
S2700, S5700, and S6700
running V200
S2700, S5700, and S6700 V200R022C00
Configuration Guide - Basic Configuration
S5700 and S6700
running V600
S5700 and S6700 V600R022C10 Configuration
Guide - Basic Configuration
S5700 and S6700 V600R023C00 Web-based
Configuration Guide
S3700 running V600
Issue 03 (2023-10-26)
S3700 V600R022C10 Configuration Guide - Basic
Configuration
Copyright © Huawei Technologies Co., Ltd.
11
Descargar