驱动安装须知 首先请对照下图确认您购买的是哪款编程线，选择正确的 USB 驱动 Firstly, please check which programming cable you have purchased against the diagram below and select the correct USB driver. 1 1.如购买的是高性能增强型编程线，那么请您安装： If you are purchasing a High performance Plus programming cable, then please install： 2.如购买的是黄色经济型编程线，那么请您安装： If you are purchasing a Yellow economy programming cable, then please install： 3.如购买的是隔离工业型编程线，那么请您安装： If you are buying an Isolated industrial type programming cable , please install： 4. 如购买的是 1747-UIC 编程线，那么请您安装： If you have purchased a programming cable for the 1747-UIC, then please install. 5．如购买的是 TSXPCX3030/隔离通用型/黑色通用型编程线，那么请您进入下方 文件夹，找到相对应的文件： If you have purchased a TSXPCX3030/Isolated Universal/Black Universal programming cable, then please go to the following folder and find the corresponding file. 2 最后： 购买隔离通用型编程线的客户请注意，首先把我们配送的光盘放入光驱， Customers who buy the isolated universal programming cable please note that we first put the CD delivered into the CD drive 然后插上编程线，这时电脑会搜索自动安装隔离通用型编程线的驱动， Then plug in the programming cable, when the computer will search for the isolated universal programming cable driver automatically installed. （电脑属性里显示 Computer property display） 当看到这个 COM2，驱动就按安装好了。 See this COM2, then the driver is installed. 3