DATA SHEET POLYETHYLENE TUBING PERFORATED

DATA SHEET
POLYETHYLENE TUBING PERFORATED
APPLICATIONS:
Localized irrigation for hydroponic cultivation.
For the subsequent collocation of on-line, compensating,
and dismantelable drippers.
SPECIFICATIONS
RAW MATERIAL:
Low Density Polyethylene (LDPE).
DIAMETERS: 16, 18 Y 20mm
Manufactured according to UNE standard 53367 relating to PE tubing for
micro irrigation lateral branches. Produced using antioxidants to combat
degradation and aging. Resistant to commonly used chemical agents and fertilizers.
Precision perforated tubing to avoid leakage with a perforation diameter
of 2.65 mm or 2.8 mm.
WORKING PRESSURES:
!
2.5 bar max. for Ø 16mm tubing.
Distancia taladrado
Bobina (mt)
Spacing
0,25
Coil
0,33
0,40
250
0,50
>0,50
Suministramos en otras medidas previa consulta, bajo pedido y coste adicional
We supply other sizes after consultation on special orders and at an additional cost
STORAGE:
Should be stored in a dry, well-drained, paved area at a maximum temperature
of 50ºC and protected from direct sunlight. Unsuitable storage can result in degradation
and deterioration of the properties of the product.
www.amacom.es // info@amacom.es