HOSE FITTINGS Intertraco (Italia) S.p.A. Via E. Amaldi, 1/A-B I-46029 SUZZARA (MN)-ITALY P.O. Box N°7/C Tel. +39 0376 539 711 Fax +39 0376 521 722 e-mail info@intertraco.it www.intertraco.it HOSE FITTINGS 2P009 2P009 HOSE FITTINGS 2P009 © Intertraco (Italia) S.p.A. Hose Fittings Catalogue 2P009 - rev.00 - March 30, 2009 The data reported in this catalogue are not binding. Intertraco (Italia) S.p.A. reserves the right to change specifications without notice. I dati riportati nella seguente pubblicazione non sono impegnativi. Intertraco (Italia) S.p.A. si riserva di apportare modifiche senza preavviso. The data reported in this catalogue are not binding. Intertraco (Italia) S.p.A. reserves the right to change specifications without notice. Die vorliegenden Angaben sind nicht bindend. Intertraco (Italia) S.p.A. behält sich technische Änderungen vor ohne Mitteilung. Los datos referidos en la presente publicaciòn son indicativos. Intertraco (Italia) S.p.A. se reserva el derecho de modificar las especificaciones sin aviso previo. Compatibility Chart between IT Two Piece Fittings and wire braided and multispiral hoses (*2) Tabella compatibilità tra raccordi 2 pezzi IT e tubi idraulici trecciati e spiralati. (*2) Sizes Hose Standard INTERTRACO Hose Type dimensioni tubo Standard tubo INTERTRACO ABMESSUNGEN STANDARDSCHLAUCH INTERTRACO SCHLAUCHTYP PULGADA MANGUERA Standard TIPO MANGUERA INTERTRACO -03 / -32 EN 853 1SN SAE 100 R1AT FlexIT 1T -03 / -32 EN 853 2SN SAE 100 R2AT FlexIT 2T -04 / -16 EN 857 1SC FlexIT SK117 ( -04, -05, -06, -08 ) Application Applicazione ANWENDUNG APLICACIONES no-skive ext-skive no-skive ext-skive no-skive no-skive -04 / -16 EN857 2SC FlexIT SC216 no-skive ext-skive no-skive - - FlexIT SK216 ( 2 wire compact high pressure ) no-skive ext-skive no-skive -04 / -16 SAE 100 R16 FlexIT SK142 -04 / -16 SAE 100 R17 FlexIT SK117 ( -04, -06, -08 ) FlexIT SC216 ( -10, -12 ) FlexIT SK216 ( -16 ) - - FlexIT 3T ( 3 wire thin cover ) SAE 100 R6 FlexIT R6 no-skive SAE 100 R7 FlexIT R7 no-skive SAE 100 R14 FlexIT 14 no-skive -04 / -16 EN 856 4SP FlexIT 4SP FlexIT 4000-5000-6000 ( -06 / -16 ) ext-skive -12 / -32 EN 856 4SH FlexIT 4SH - - FlexIT 4ST -06 / -32 SAE 100 R12 FlexIT 4000-5000-6000 (*3) FlexIT R12 ( -20 / -32 ) SAE 100 R13 FlexIT R13 Interlock SAE 100 R15 FlexIT R15 Interlock -03 / -12 -03 / -16 -03 / -16 -12 / -32 -12 / -32 no-skive no-skive ext-skive no-skive Interlock ext-skive no-skive ext-skive no-skive ext-skive (*1) : For SAE R5, R8 and EN 854 1TE, 2TE, 3TE, please contact our technical dept. (*1) : Per i tubi SAE R5, R8 e EN 854 1TE, 2TE, 3TE, vi preghiamo di contattare il nostro ufficio tecnico. (*1) : Bei SAE R5, R8 und EN 854 1TE, 2TE, 3TE wenden Sie sich bitte an unsere technische Abteilung. (*1) : Para las mangueras SAE R5 , R8 y EN 854 1TE,2TE,3TE, le rogamos de contactar el nuestro departamento tecnico. (*2) : Any hose and coupling combination should be fully tested before being utilized. The above information are guide lines only. (*2) : Le combinazioni indicate sono da considerarsi linee guida, da riconfermare con i test specifici previsti dalle normative di riferimento. (*2) : Jede Schlauch/Armaturenverbindung muss vor dem Einsatz vollständig getestet sein. Die zuvor genannte Information ist nur eine Richtlinie. (*2) : Las combinaciones indicadas son lineas guias a reconfirmar con los test especificos previsto da las normativas de referimiento. (*3) : Please refer to our crimping chart for more detailed information. (*3) : Per informazioni complete, vi preghiamo di consultare le nostre specifiche di pinzatura. (*3) : Für detailiertere Informationen benutzen Sie bitte unsere Bearbeitungstabellen (*3) : Para mayor detalles le rogamos de consultar las nuestras tablas de prensadura. 2 - © Intertraco (Italia) S.p.A. All rights are reserved Zuordnungstabelle für die zweiteilige Armatur von IT mit Geflechtsschlauch und Multispiralschlauch (*2) Tabla de compatibilidad racores dos piezas con mangueras trensadas y espirales (*2) Ø mm Ø inch Size 5 3/16” 6 1/4” 8 5/16” 10 3/8” 12 1/2” 16 5/8” 19 3/4” 25 1” 31 1 1/4” 38 1 1/2” 51 2” -03 -04 -05 -06 -08 -10 -12 -16 -20 -24 -32 B+SN03T B+S0210 B+SN03T B+S0420 B+SCX0T B+SN03T B+SCX0T B+S0210 B+SN03T B+SCX0T B+S0210 B+SCX0T B+SN03T B+SCX0T B+SN03T B+S0420 B+S0420 B+S312T B+S312T B+S00TK B+S00TK B+S014T B+S0420 B+S0420 I+S004I B+S0420 B+S312T B+S0420 B+S312T B+S0420 I+S004I I+S004I (*4) : The Colours identify the type of application. (*4) : I Colori indicano il tipo di applicazione. (*4) : Die Farben geben den Anwendungsfall an. (*4) : Los colores indican el tipo de aplicacion. No-skive Ext-skive I+S006I I+S006I Z+SZ06I Interlock (*5) : The Letters identify the coupling and the ferrule series. Example: B (coupling series) + SN03T (ferrule series) (*5) : Le Lettere indicano la serie del raccordo e della boccola. Example: B (coupling series) + SN03T (ferrule series) (*5) : Die Buchstaben geben die Armaturen und Fassungsserien an. Example: B (coupling series) + SN03T (ferrule series) (*5) : Las letras idican la serie del racor y del casquillo. Example: B (coupling series) + SN03T (ferrule series) © Intertraco (Italia) S.p.A. All rights are reserved - 3 Insert / Ferrule Application Chart and matching possibilities for wire braided and multispiral hoses (*2) Applicazioni e compatibilità tra le combinazioni inserto / boccola con tubi trecciati e spiralati (*2) Insert / Ferrule Inserto / boccola ARMATUR/FASSUNG RACOR/CASQUILLO Application Std Applicazione ANWENDUNG APLICACIONES ext-skive B series EN 853 1SN SAE 100 R1AT EN 853 2SN SAE 100 R2AT EN 857 1SC EN 857 2SC - FlexIT 1T FlexIT 2T FlexIT SK117 FlexIT SC216 FlexIT SK216 * -04/-16 -04/-16 -04/-16 -04/-16 -04/-16 -04/-16 -04/-32 S0210 ext-skive B series S0420 no-skive B series -04/-32 -03/-32 SN03T no-skive B series -03/-32 -04/-16 SCX0T no-skive B series S312T no-skive B series S00TK no-skive B series S014T (*4) : The Colours identify the type of application. (*4) : I Colori indicano il tipo di applicazione. (*4) : Die Farben geben den Anwendungsfall an. (*4) : Los colores indican el tipo de aplicacion. 4 - © Intertraco (Italia) S.p.A. All rights are reserved No-skive Ext-skive Interlock Anwendungstabelle für Schlauchnippel/Fassung und Zuordnungsmöglichkeiten für den Geflechtsschlauch und Spiralschlauch (*2) Tabla de aplicaciones y compatibilidades entre las combinaciones racor/casquillo con mangueras trensadas y espirales (*2) SAE SAE 100 R16 100 R17 SAE 100 R6 SAE 100 R7 SAE 100 R14 EN EN 856 4SP 856 4SH - SAE SAE SAE 100 R12 100 R13 100 R15 FlexIT SK142 FlexIT R6 FlexIT R7 FlexIT 14 FlexIT 4SP 4000 5000 6000 FlexIT 4SH FlexIT 4ST FlexIT FlexIT R13 4000 5000 6000 (*5) R12 -04 -06/-16 -12/-32 -08/-16 -06/-32 -08/-16 -06/-16 FlexIT SK117 SC216 SK216 FlexIT 3T ** -06/-08 -12/-16 -04/-16 -10/-16 -04/-16 -04/-08 -06/-16 -03/-12 FlexIT R15 -03/-16 -03/-16 (*5) : The Numbers identify the coupling sizes. (*5) : I Numeri indicano il size del raccordo. (*5) : Die Zahlen geben die Armaturennennweiten an. (*5) : Los numeros indican la pulgada del racor. Size -03 -04 -05 Ø mm 5 6 8 Ø inch 3/16” 1/4” 5/16” -06 -08 -10 -12 -16 10 12 16 19 25 3/8” 1/2” 5/8” 3/4” 1” -20 -24 -32 31 38 51 1 1/4” 1 1/2” 2” © Intertraco (Italia) S.p.A. All rights are reserved - 5 Insert / Ferrule Application Chart and matching possibilities for multispiral hoses in interlock application (*2) Applicazioni e compatibilità tra le combinazioni inserto / boccola con spiralati in applicazione interlock(*2) Insert / Ferrule Inserto / boccola ARMATUR/FASSUNG RACOR/CASQUILLO Application Std Applicazione ANWENDUNG APLICACIONES EN EN 856 4SP 856 4SH - SAE SAE SAE 100 R12 100 R13 100 R15 FlexIT 4SP 4000 5000 6000 FlexIT 4ST FlexIT FlexIT R13 4000 5000 6000 (*5) R12 Interlock I series FlexIT 4SH -12/-32 -12 /-16 -20/-32 -20/-24 S006I Interlock Z series -12/-16 S004I Interlock I series FlexIT R15 -32 SZ06I (*1) : For SAE R5, R8 and EN 854 1TE, 2TE, 3TE, please contact our technical dept. (*1) : Per i tubi SAE R5, R8 e EN 854 1TE, 2TE, 3TE, vi preghiamo di contattare il nostro ufficio tecnico. (*1) : Bei SAE R5, R8 und EN 854 1TE, 2TE, 3TE wenden Sie sich bitte an unsere technische Abteilung. (*1) : Para las mangueras SAE R5 , R8 y EN 854 1TE,2TE,3TE, le rogamos de contactar el nuestro departamento tecnico. (*2) : Any hose and coupling combination should be fully tested before being utilized. The above information are guide lines only. (*2) : Le combinazioni indicate sono da considerarsi linee guida, da riconfermare con i test specifici previsti dalle normative di riferimento. (*2) : Jede Schlauch/Armaturenverbindung muss vor dem Einsatz vollständig getestet sein. Die zuvor genannte Information ist nur eine Richtlinie. (*2) : Las combinaciones indicadas son lineas guias a reconfirmar con los test especificos previsto da las normativas de referimiento. (*3) : Please refer to our crimping chart for more detailed information. (*3) : Per informazioni complete, vi preghiamo di consultare le nostre specifiche di pinzatura. (*3) : Für detailiertere Informationen benutzen Sie bitte unsere Bearbeitungstabellen. (*3) : Para mayor detalles le rogamos de consultar las nuestras tablas de prensadura. * FLEXIT SK216 (2 wire compact high pressure) FLEXIT SK216 (tubo compatto 2 trecce) FLEXIT SK216 (2-Draht-Kompakt Hochdruckgeflechtsschlauch) FLEXIT SK216 (manguera 2 mallas compacta) ** FLEXIT 3T (3 wire thin cover) FLEXIT 3T (tubo 3 trecce copertura sottile) FLEXIT 3T (3-Draht-Hochdruckgeflechtsschlauch) FLEXIT 3T (manguera 3 mallas compacta) 6 - © Intertraco (Italia) S.p.A. All rights are reserved Anwendungstabelle für interlock Schlauchnippel/Fassung und Zuordnungsmöglichkeiten für Spiralschlauch (*2) Tabla de aplicaciones y compatibilidades entre las combinaciones racor/casquillo interlock con mangueras espirales (*2) (*4) : The Colours identify the type of application. (*4) : I Colori indicano il tipo di applicazione. (*4) : Die Farben geben den Anwendungsfall an. (*4) : Los colores indican el tipo de aplicacion. (*5) : The Numbers identify the coupling sizes. (*5) : I Numeri indicano il size del raccordo. (*5) : Die Zahlen geben die Armaturennennweiten an. (*5) : Los numeros indican la pulgada del racor. No-skive Size Ext-skive Interlock -03 -04 -05 -06 -08 -10 -12 -16 -20 -24 -32 Ø mm 5 6 8 10 12 16 19 25 31 38 51 Ø inch 3/16” 1/4” 5/16” 3/8” 1/2” 5/8” 3/4” 1” 1 1/4” 1 1/2” 2” © Intertraco (Italia) S.p.A. All rights are reserved - 7 8 - © Intertraco (Italia) S.p.A. All rights are reserved HOSE FITTINGS 2P009 B series - SERIE TWO PIECE SWAGED FITTINGS UNIV. SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT- UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES i series - SERIE INTERLOCK FITTINGS FOR 4 AND 6 SPIRAL HOSES RACCORDI INTERLOCK PER TUBI A 4 E 6 SPIRALI INTERLOCK-ARMATUREN FÜR 4 UND 6 SPIRALSCHLÄUCHE RACORES INTERLOCK PARA MANGUERA 4 Y 6 ESPIRALES © Intertraco (Italia) S.p.A. All rights are reserved - 9 10 - © Intertraco (Italia) S.p.A. All rights are reserved Series Serie B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES 12 - © Intertraco (Italia) S.p.A. All rights are reserved B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES INdex-INDICE-INDEX-ÍNDICE PRODUCT PRODOTTO PRODUKT PRODUCTO DESCRIPTION DESCRIZIONE BESCHREIBUNG DESCRIPCIÓN PAGE PAGINA SEITE PÁGINA SKIVE FERRULE FOR: EN 853 1ST - SAE 100 R1A - EN857 2SC INTERTRACO HOSE TYPE: FlexIT 1T; FlexIT SK216; FLexit sc216 BOCCOLA SKIVE PER TUBI: EN 853 1ST - SAE 100 R1A - EN857 2SC TUBI INTERTRACO: FlexIT 1T; FlexIT SK216; FLexit sc216 S0210 ferrule BOCCOLA S0420 PRESSFASSUNG CASQUILLO SN03T PRESSFASSUNG ZUM AUSSENSCHÄLEN FÜR SCHLÄUCH: EN 853 1ST - SAE 100 R1A - EN857 2SC INTERTRACO-SCHLÄUCH TYP: FlexIT 1T; FlexIT SK216; FLexit sc216 CASQUILLO A PELAR PARA: EN 853 1ST - SAE 100 R1A - EN857 2SC MANGUERA INTERTRACO TIPO: FlexIT 1T; FlexIT SK216; FLexit sc216 SKIVE FERRULE FOR: EN 853 2ST - SAE 100 R2A - EN856 4SP (SIZES 04 TO 16); EN 856 4SH (SIZES 12 TO 32) - SAE 100 R12 INTERTRACO HOSE TYPE: FlexIT 2T/3T/4000/5000/6000; FlexIT 4SP; FlexIT 4SH; FlexIT 4ST; FlexIT 12 BOCCOLA SKIVE PER TUBI: EN 853 2ST - SAE 100 R2A - EN856 4SP (DA SIZE 04 A SIZE 16); EN 856 4SH (DA SIZE 12 A SIZE 32) - SAE 100 R12 TUBI INTERTRACO: FlexIT 2T/3T/4000/5000/6000; FlexIT 4SP; FlexIT 4SH; FlexIT 4ST; FlexIT 12 PRESSFASSUNG ZUM AUSSENSCHÄLEN FÜR SCHLÄUCH: EN 853 2ST - SAE 100 R2A - EN856 4SP (FON GRÖSSE 04 BIS 16); EN 856 4SH (FON GRÖSSE 12 BIS 32) - SAE 100 R12 INTERTRACO-SCHLÄUCH TYP: FlexIT 2T/3T/4000/5000/6000; FlexIT 4SP; FlexIT 4SH; FlexIT 4ST; FlexIT 12 CASQUILLO A PELAR PARA: EN 853 2ST - SAE 100 R2A - EN856 4SP (PULGADA DE 04 A 16); EN 856 4SH (PULGADA DE 20 A 32) - SAE 100 R12 MANGUERA INTERTRACO TIPO FlexIT 2T/3T/4000/5000/6000; FlexIT 4SP; FlexIT 4SH; FlexIT 4ST; FlexIT 12 NO-SKIVE FERRULE FOR: EN 853 1SN/2SN - SAE 100 R1AT/R2AT EN857 2SC - SAE 100 R16; SAE 100 R17 (SIZE 10-12-16) INTERTRACO HOSE TYPE: FlexIT 1T/2T/SK216; FlexIT 4ST BOCCOLA NO-SKIVE PER TUBI: EN 853 1SN/2SN - SAE 100 R1AT/ R2AT - EN857 2SC - SAE 100 R16; SAE 100 R17 (SIZES 10-12-16) TUBI INTERTRACO: FlexIT 1T/2T/SK216; FlexIT 4ST PRESSFASSUNG ZUM NICHTSCHÄLEN FÜR SCHLÄUCH: EN 853 1SN/2SN - SAE 100 R1AT/R2AT - EN857 2SC - SAE 100 R16; SAE 100 R17 (GRÖSSE 10-12-16) INTERTRACO-SCHLÄUCH TYP: FlexIT 1T/2T/SK216; FlexIT 4ST CASQUILLO SIN PELAR PARA: EN 853 1SN/2SN - SAE 100 R1AT/R2AT - EN857 2SC - SAE 100 R16; SAE 100 R17 (PULGADA 10-12-16) MANGUERA INTERTRACO TIPO: FlexIT 1T/2T/SK216; FlexIT 4ST 28 29 30 © Intertraco (Italia) S.p.A. All rights are reserved - 13 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES PRODUCT PRODOTTO PRODUKT PRODUCTO DESCRIPTION DESCRIZIONE BESCHREIBUNG DESCRIPCIÓN SCX0T NO-SKIVE FERRULE FOR: EN 857 1SC/2SC - SAE 100 R1AT; SAE 100 R16; SAE 100 R17 INTERTRACO HOSE TYPE: FlexIT SK117/SK142; FlexIT SK216 BOCCOLA NO-SKIVE PER TUBI: EN 857 1SC/2SC - SAE 100 R1AT; SAE 100 R16; SAE 100 R17 TUBI INTERTRACO: FlexIT SK117/SK142; FlexIT SK216 PRESSFASSUNG ZUM NICHTSCHÄLEN FÜR SCHLÄUCH: EN 857 1SC/2SC - SAE 100 R1AT; SAE 100 R16; SAE 100 R17 INTERTRACO-SCHLÄUCH TYP: FlexIT SK117/SK142; FlexIT SK216 CASQUILLO SIN PELAR PARA: EN 857 1SC/2SC - SAE 100 R1AT; SAE 100 R16; SAE 100 R17 MANGUERA INTERTRACO TIPO: FlexIT SK117/SK142; FlexIT SK216 NO-SKIVE FERRULE FOR: SAE 100 R12 INTERTRACO HOSE TYPE: FlexIT 3T/4000/5000/6000/4ST; FlexIT 12 PAGE PAGINA SEITE PÁGINA 31 BOCCOLA NO-SKIVE PER TUBI: SAE 100 R12 TUBI INTERTRACO: FlexIT 3T/4000/5000/6000/4ST; FlexIT 12 S312T ferrule BOCCOLA PRESSFASSUNG CASQUILLO PRESSFASSUNG ZUM NICHTSCHÄLEN FÜR SCHLÄUCH: SAE 100 R12 INTERTRACO-SCHLÄUCH TYP: FlexIT 3T/4000/5000/6000/4ST; FlexIT 12 CASQUILLO SIN PELAR PARA: SAE 100 R12 MANGUERA INTERTRACO TIPO: FlexIT 3T/4000/5000/6000/4ST; FlexIT 12 32 NO-SKIVE FERRULE FOR: SAE 100 R7 INTERTRACO HOSE TYPE: FlexIT R7 S00TK BOCCOLA NO-SKIVE PER TUBI: SAE 100 R7 TUBI INTERTRACO: FlexIT R7 PRESSFASSUNG ZUM NICHTSCHÄLEN FÜR SCHLÄUCH: SAE 100 R7 INTERTRACO-SCHLÄUCH TYP: FlexIT R7 33 CASQUILLO SIN PELAR PARA: SAE 100 R7 MANGUERA INTERTRACO TIPO: FlexIT R7 NO-SKIVE FERRULE FOR: SAE 100 R14 INTERTRACO HOSE TYPE: FlexIT R14 S014T BOCCOLA NO-SKIVE PER TUBI: SAE 100 R14 TUBI INTERTRACO: FlexIT R14 PRESSFASSUNG ZUM NICHTSCHÄLEN FÜR SCHLÄUCH: SAE 100 R14 INTERTRACO-SCHLÄUCH TYP: FlexIT R14 CASQUILLO SIN PELAR PARA: SAE 100 R14 MANGUERA INTERTRACO TIPO: FlexIT R14 14 - © Intertraco (Italia) S.p.A. All rights are reserved 34 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES PRODUCT PRODOTTO PRODUKT PRODUCTO DESCRIPTION DESCRIZIONE BESCHREIBUNG DESCRIPCIÓN MT10B MP10B MB10B FB11B FB41B BSP - BSPT FB91B KM91B FP11B BB10B VB10B PAGE PAGINA SEITE PÁGINA BSPT TAPERED MALE - 60° CONE MASCHIO BSP CONICO SV. 60° BSPT Aussengewinde - 60° KONUS MACHO FIJO BSPT CONO 60° BSP FLAT FACE MALE MASCHIO BSP FACCIA PIANA AGR BSP-Anschlussstutzen mit BSP AG flachdichtend MACHO FIJO BSP ASIENTO PLANO BSP MALE - 60° CONE MASCHIO BSP CILINDRICO SV. 60° AGR BSP-Anschlussstutzen 60° Konus mit BSP AG MACHO FIJO BSP CONO 60° BSP FEMALE SWIVEL - 60° CONE FEMMINA BSP DIRITTA CONO 60° DKR BSP Dichtkopf 60° Konus BSP Gewinde HEMBRA GIRATORIA RECTA BSP CONO 60° BSP FEMALE SWIVEL 60° CONE - 45° ELBOW FEMMINA BSP 45° CONO 60° DKR 45° - 60° KONUS HEMBRA GIRATORIA A 45° BSP CONO 60° BSP FEMALE SWIVEL 60° CONE - 90° ELBOW FEMMINA BSP 90° CONO 60° DKR 90° - 60° KONUS HEMBRA GIRATORIA A 90° BSP CONO 60° BSP FEMALE SWIVEL 60° CONE - 90° ELBOW (COMPACT FORGED) FEMMINA BSP COMPATTA 90° CONO 60° DKR BSP-Dichtkopf Kompakt 90° UNF-Gewinde 60° KONUS HEMBRA GIRATORIA 90° COMPACTA BSP CONO 60° BSP FLAT FACE FEMALE SWIVEL FEMMINA BSP FACCIA PIANA DIRITTA BSP flachdichtend BSP Gewinde HEMBRA GIRATORIA RECTA BSP CON ASIENTO PLANO BSP BANJO BANJO BSP Ringnippel BSP ORIENTABLE BANJO BSP BSP BANJO BOLT VITE FORATA BSP Hohlschraube BSP Gewinde TORNILLO BSP PARA ORIENTABLE BANJO 35 36 38 40 42 44 46 47 48 49 © Intertraco (Italia) S.p.A. All rights are reserved - 15 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES PRODUCT PRODOTTO PRODUKT PRODUCTO DESCRIPTION DESCRIZIONE BESCHREIBUNG DESCRIPCIÓN PAGE PAGINA SEITE PÁGINA JET WASH FEMALE SWIVEL “K” TYPE KW13B FEMMINA DIRITTA PER IDROPULITRICE TIPO “K” Pressnippel DKO fuer Waschgeraete 50 HEMBRA GIRATORIA JET WASH ESTILO “K” METRIC FEMALE SWIVEL (MULTISEAL 24°/60° CONE SEAT) FQ13B FEMMINA METRICA DIRITTA CONO UNIVERSALE (MULTISEAL 24°/60°) DKL Dichtkegel mit Ueberwurfmutter 51 HEMBRA GIRATORIA RECTA METRICA CONO MULTIUSO 24°/60° METRIC FEMALE SWIVEL - 90° ELBOW (MULTISEAL 24°/60° CONE SEAT) METRIC FQ93B FEMMINA METRICA 90° CONO UNIVERSALE (MULTISEAL 24°/60°) DKL 90° Dichtkegel mit Ueberwurfmutter 52 HEMBRA GIRATORIA A 90°METRIC CONO MULTIUSO 24°/60° METRIC FEMALE SWIVEL (60° CONE SEAT) FM13B FEMMINA METRICA DIRITTA CONO 60° Dichtkopf-Universal 60° konus Metrisch 53 HEMBRA GIRATORIA RECTA METRICA CONO 60° METRIC FEMALE SWIVEL - 90° ELBOW (60° CONE SEAT) FM93B FEMMINA METRICA 90° CONO 60° 90° Dichtkopf-Universal 60° konus Metrisch HEMBRA GIRATORIA A 90° METRICA CONO 60° 16 - © Intertraco (Italia) S.p.A. All rights are reserved 54 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES PRODUCT PRODOTTO PRODUKT PRODUCTO DESCRIPTION DESCRIZIONE BESCHREIBUNG DESCRIPCIÓN PAGE PAGINA SEITE PÁGINA METRIC STANDPIPE SM10B ERMETO DIRITTO ROHRSTUTZEN BEL/BES GERADE 55 ESPIGA LISA RECTA METRICA METRIC STANDPIPE - 45° ELBOW SM40B ERMETO 45° Rohrstutzen BEL/ BES 45° 56 ESPIGA LISA 45° METRICA METRIC STANDPIPE - 90° ELBOW SM90B ERMETO 90° Rohrstutzen BEL/ BES 90° 57 ESPIGA LISA 90° METRICA METRIC METRIC BANJO BM10B BANJO METRICO 58 RingnipPel metrisch ORIENTABLE BANJO METRICO METRIC BANJO BOLT VM10B VITE FORATA METRICA Hohlschraube metrisch 59 TORNILLO METRICO PARA ORIENTABLE BANJO METRIC LIGHT MALE (24° CONE SEAT) ML10B MASCHIO METRICO SV. 24° SERIE LEGGERA (DIN 3853) CEL Gewindezapfen leichte Reihe 24° Konus 60 MACHO FIJO METRIC CONO 24° SERIE LIGERA © Intertraco (Italia) S.p.A. All rights are reserved - 17 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES PRODUCT PRODOTTO PRODUKT PRODUCTO DESCRIPTION DESCRIZIONE BESCHREIBUNG DESCRIPCIÓN PAGE PAGINA SEITE PÁGINA METRIC LIGHT FEMALE SWIVEL (24° CONE SEAT) FL13B FEMMINA METRICA DIRITTA O-RING CONO 24° SERIE LEGGERA DKOL Dichtkegel mit O-Ring leichte Reihe 24° KONUS 61 HEMBRA GIRATORIA RECTA METRICA CONO 24° SERIE LIGERA METRIC LIGHT FEMALE SWIVEL - 45° ELBOW (24° CONE SEAT) FL43B FEMMINA METRICA 45° O-RING CONO 24° SERIE LEGGERA DKOL 45° - 24° KONUS 62 HEMBRA GIRATORIA A 45° METRICA CONO 24° SERIE LIGERA METRIC LIGHT FEMALE SWIVEL - 90° ELBOW (24° CONE SEAT) FL93B FEMMINA METRICA 90° O-RING CONO 24° SERIE LEGGERA DKOL 90° - 24° KONUS 63 HEMBRA GIRATORIA A 45° METRICA CONO 24° SERIE LIGERA METRIC METRIC HEAVY MALE (24° CONE SEAT) MS10B MASCHIO METRICO SV. 24° SERIE PESANTE CES Gewindezapfen schwere Reihe 24° Konus 64 MACHO FIJO METRICO CONO 24° SERIE PESADA METRIC HEAVY FEMALE SWIVEL (24° CONE SEAT) FS13B FEMMINA METRICA DIRITTA O-RING CONO 24° SERIE PESANTE DKOS Dichtkegel mit O-Ring schwere Reihe 24° KONUS 66 HEMBRA GIRATORIA RECTA METRICA CONO 24° SERIE PESADA METRIC HEAVY FEMALE SWIVEL - 45° ELBOW (24° CONE SEAT) FS43B FEMMINA METRICA 45° O-RING CONO 24° SERIE PESANTE DKOS 45° - 24° KONUS HEMBRA GIRATORIA a 45° METRICA CONO 24° SERIE PESADA 18 - © Intertraco (Italia) S.p.A. All rights are reserved 68 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES PRODUCT PRODOTTO PRODUKT PRODUCTO DESCRIPTION DESCRIZIONE BESCHREIBUNG DESCRIPCIÓN PAGE PAGINA SEITE PÁGINA METRIC HEAVY FEMALE SWIVEL - 90° ELBOW (24° CONE SEAT) METRIC FS93B FEMMINA METRICA 90° O-RING CONO 24° SERIE PESANTE DKOS 90° - 24° KONUS 69 HEMBRA GIRATORIA A 90° METRICA CONO 24° SERIE PESADA JIC 37° MALE MJ10B MASCHIO JIC CONO 37° AGJ JIC-Anschlussstutzen 37° Konus mit UNF Gewinde 70 MACHO FIJO JIC 37° JIC 37° FEMALE SWIVEL FJ11B FEMMINA JIC DRITTA CON SV. 37° DKJ JIC-Dichtkopf 37° Konus UNF GewindE 72 HEMBRA GIRATORIA RECTA JIC 37° JIC 37° FEMALE SWIVEL (DOUBLE HEX) JIC FJH11B FEMMINA JIC DRITTA CON CONTROESAGONO SV. 37° DKJ JIC-Dichtkopf 37° Konus UNF Gewinde MIT KONTERSECHSKANT 74 HEMBRA GIRATORIA RECTA JIC 37° con controexagono JIC 37° FEMALE SWIVEL - 45° ELBOW FJ41B FEMMINA JIC 45° SV. 37° 76 DKJ 45° - 37° KONUS HEMBRA GIRATORIA A 45° JIC 37° JIC 37° FEMALE SWIVEL - 90° ELBOW FJ91B FEMMINA JIC 90° SV. 37° 78 DKJ 90° - 37° KONUS HEMBRA GIRATORIA A 90° JIC 37° © Intertraco (Italia) S.p.A. All rights are reserved - 19 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES PRODUCT PRODOTTO PRODUKT PRODUCTO DESCRIPTION DESCRIZIONE BESCHREIBUNG DESCRIPCIÓN PAGE PAGINA SEITE PÁGINA JIC 37° FEMALE SWIVEL - 90° ELBOW (LONG DROP) FJ91B-L FEMMINA JIC 90° SV. 37° (VERSIONE ALTA) DKJ 90° Sonder-SL - 37° KONUS 80 HEMBRA GIRATORIA A 90° JIC 37° ( CODO LARGO ) JIC JIC 37° FEMALE SWIVEL - 90° ELBOW (COMPACT FORGED) KJ91B FEMMINA JIC COMPATTA 90° SV. 37° DKJ JIC- Dichtkopf Kompakt 90° UNF-Gewinde 37° konus 82 HEMBRA GIRATORIA a 90° COMPACTA JIC 37° ORFS MALE OM10B MASCHIO ORFS ORfS- Armatur Aussengewinde 83 MACHO FIJO ORFS ORFS FEMALE SWIVEL OR13B FEMMINA ORFS DIRITTA ORfS- Armatur Innengewinde 84 HEMBRA GIRATORIA RECTA ORFS ORFS ORFS FEMALE SWIVEL - 45° ELBOW OR43B FEMMINA ORFS 45° ORfS - Armatur 45° 86 HEMBRA GIRATORIA a 45° ORFS ORFS FEMALE SWIVEL - 90° ELBOW OR93B FEMMINA ORFS 90° ORfS- Armatur 90° HEMBRA GIRATORIA a 90° ORFS 20 - © Intertraco (Italia) S.p.A. All rights are reserved 88 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES PRODUCT PRODOTTO PRODUKT PRODUCTO DESCRIPTION DESCRIZIONE BESCHREIBUNG DESCRIPCIÓN PAGE PAGINA SEITE PÁGINA ORFS FEMALE SWIVEL - 90° ELBOW (LONG DROP) ORFS OR93B-L FEMMINA ORFS 90° (VERSIONE ALTA) ORfS - Armatur 90° SONDER-SL 90 HEMBRA GIRATORIA a 90° ORFS (CODO LARGO) SAE 45° MALE MU10B MASCHIO SAE CONO 45° SAE Aussengewinde 45° Konus 91 MACHO FIJO SAE 45° SAE 45° FEMALE SWIVEL FU11B FEMMINA SAE DIRITTA SV. 45° SAE Dichtkopf 45° Konus 92 HEMBRA GIRATORIA RECTA SAE 45° SAE 45° FEMALE SWIVEL - 90° ELBOW SAE FU91B FEMMINA SAE 90° SV. 45° 90° SAE Dichtkopf 45° Konus 93 HEMBRA GIRATORIA a 90° SAE 45° O-RING BOSS MALE ME10B MASCHIO SAE O-RING SAE Aussengewinde O-RING BOSS 94 MACHO FIJO O-RING BOSS O-RING BOSS MALE SWIVEL MV10B MASCHIO GIREVOLE DIRITTO SAE O-RING SAE Aussengewinde O-RING BOSS 95 MACHO GIRATORIO RECTO O-RING BOSS © Intertraco (Italia) S.p.A. All rights are reserved - 21 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES PRODUCT PRODOTTO PRODUKT PRODUCTO DESCRIPTION DESCRIZIONE BESCHREIBUNG DESCRIPCIÓN PAGE PAGINA SEITE PÁGINA O-RING BOSS MALE SWIVEL - 45° ELBOW MV40B MASCHIO GIREVOLE 45° SAE O-RING 45° SAE Aussengewinde O-RING BOSS 96 MACHO GIRATORIO 45° O-RING BOSS O-RING BOSS MALE SWIVEL - 90° ELBOW MV90B MASCHIO GIREVOLE 90° SAE O-RING 90° SAE Aussengewinde O-RING BOSS 97 MACHO GIRATORIO 90° O-RING BOSS SAE INVERTED FLARE MALE SWIVEL MZ10B MASCHIO GIREVOLE DIRITTO SAE SV. INVERTITA SAE INVERTED FLARE MALE SWIVEL 98 MACHO GIRATORIO SAE INVERTIDO SAE SAE INVERTED FLARE MALE SWIVEL - 45° ELBOW MZ40B MASCHIO GIREVOLE 45° SAE SV. INVERTITA SAE INVERTED FLARE MALE SWIVEL - 45° ELBOW 99 MACHO GIRATORIO SAE INVERTIDO SAE INVERTED FLARE MALE SWIVEL - 90° ELBOW MZ90B MASCHIO GIREVOLE 90° SAE SV. INVERTITA SAE INVERTED FLARE MALE SWIVEL - 90° ELBOW 100 MACHO GIRATORIO SAE INVERTIDO SAE FLARLESS MALE ASSEMBLY MFA10B MASCHIO SAE SV. 24 SAE FLARLESS MALE ASSEMBLY MACHO FIJO SAE INVERTIDO 22 - © Intertraco (Italia) S.p.A. All rights are reserved 101 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES PRODUCT PRODOTTO PRODUKT PRODUCTO DESCRIPTION DESCRIZIONE BESCHREIBUNG DESCRIPCIÓN PAGE PAGINA SEITE PÁGINA NPTF MALE (60° CONE SEAT) MASCHIO NPTF SV. 60° MN10B AGN Anschlussstutzen mit konischemNPTF-Gewinde selbstdichtend 60° konus 102 MACHO FIJO NPTF CONO 60° NPTF MALE swivel (60° CONE SEAT) MG10B MASCHIO GIREVOLE DIRITTO NPTF CONO 60° NPTF Aussengewinde 60° Konus 104 MACHO GIRATORIO NPTF CONO 60° NPTF MALE SWIVEL - 90° ELBOW ( 60° CONE SEAT) NPTF-NPSM MG90B MASCHIO GIREVOLE 90° NPTF CONO 60° 90° NPTF Aussengewinde 60° Konus 105 MACHO GIRATORIO NPTF CONO 60° NPTF FEMALE RIGID FN10B FEMMINA FISSA NPTF NPTF Innengewinde-Armatur 106 HEMBRA RIGIDA RECTA NPTF NPSM FEMALE SWIVEL (60° CONE SEAT) FN11B FEMMINA NPSM DIRITTA CONO 60° Dichtkopf 60° NPSM 107 HEMBRA GIRATORIA RECTA NPSM CONO 60° FEMALE GREASE GREASE FGR10B FEMMINA FISSA SPL-PTF INGRASSATORE Innengewinde-Armatur für Fettschmierung 108 HEMBRA ENGRASADORA © Intertraco (Italia) S.p.A. All rights are reserved - 23 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES PRODUCT PRODOTTO PRODUKT PRODUCTO DESCRIPTION DESCRIZIONE BESCHREIBUNG DESCRIPCIÓN PAGE PAGINA SEITE PÁGINA JIS FEMALE SWIVEL (60° CONE - TOYOTA STYLE) FT11B FEMMINA GAS CONO 60° STILE TOYOTA Dichtkopf JIS (60° KONUS Toyota-TYP) 109 HEMBRA GIRATORIA RECTA JIS CONO 60° ESTILO TOYOTA KOMATSU STYLE FEMALE SWIVEL 60° CONE FK11B FEMMINA METRICA DIRITTA STILE KOMATSU CONO 60° Komatsu-Typ metrisches Gewinde 60° KONUS 110 HEMBRA GIRATORIA RECTA CONO 60° ESTILO KOMATSU KOMATSU STYLE FEMALE SWIVEL 60° CONE - 45° ELBOW FK41B FEMMINA METRICA 45° STILE KOMATSU CONO 60° Komatsu-Typ 45° metrisches Gewinde 60° KONUS 112 HEMBRA GIRATORIA A 45° CONO 60° ESTILO KOMATSU JIS KOMATSU STYLE FEMALE SWIVEL 60° CONE - 90° ELBOW FK91B FEMMINA METRICA 90° STILE KOMATSU CONO 60° Komatsu-Typ 90° metrisches Gewinde 60° KONUS 113 HEMBRA GIRATORIA A 90° CONO 60° ESTILO KOMATSU KOMATSU STYLE STRAIGHT FLANGE (FOR METRIC O-RING) AK10B FLANGIA DIRITTA STILE KOMATSU (O-RING METRICO) Flanschbund Komatsu-Typ gerade 114 BRIDA RECTA ESTILO KOMATSU (O-RING METRICO) KOMATSU STYLE - 45° ELBOW FLANGE (FOR METRIC O-RING) AK40B FLANGIA 45° STILE KOMATSU (O-RING METRICO) Flanschbund Komatsu-Typ 45° BRIDA A 45° ESTILO KOMATSU (O-RING METRICO) 24 - © Intertraco (Italia) S.p.A. All rights are reserved 115 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES PRODUCT PRODOTTO PRODUKT PRODUCTO DESCRIPTION DESCRIZIONE BESCHREIBUNG DESCRIPCIÓN PAGE PAGINA SEITE PÁGINA KOMATSU STYLE - 90° ELBOW FLANGE (FOR METRIC O-RING) JIS AK90B FLANGIA 90° STILE KOMATSU (O-RING METRICO) Flanschbund Komatsu-Typ 90° 116 BRIDA A 90° ESTILO KOMATSU (O-RING METRICO) SAE 3000 CODE 61 STRAIGHT FLANGE AX10B FLANGIA DIRITTA SAE 3000 SFL gerade 117 BRIDA RECTA SAE 3000 PSI SAE 3000 CODE 61 - 22,5° ELBOW FLANGE AX20B FLANGIA 22,5° SAE 3000 SFL 22,5° BOGENARMATUR 118 BRIDA A 22,5° SAE 3000 Psi SAE 3000 CODE 61 - 30° ELBOW FLANGE SAE 3000 CODE 61 AX30B FLANGIA 30° SAE 3000 SFL 30° BOGENARMATUR 119 BRIDA A 30° SAE 3000 psi SAE 3000 CODE 61 - 45° ELBOW FLANGE AX40B FLANGIA 45° SAE 3000 SFL 45° BOGENARMATUR 120 BRIDA A 45° SAE 3000 psi SAE 3000 CODE 61 - 60° ELBOW FLANGE AX60B FLANGIA 60° SAE 3000 SFL 60° BOGENARMATUR 121 BRIDA A 60° SAE 3000 psi © Intertraco (Italia) S.p.A. All rights are reserved - 25 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES PRODUCT PRODOTTO PRODUKT PRODUCTO DESCRIPTION DESCRIZIONE BESCHREIBUNG DESCRIPCIÓN PAGE PAGINA SEITE PÁGINA SAE 3000 CODE 61 - 67,5° ELBOW FLANGE AX70B FLANGIA 67,5° SAE 3000 SFL 67,5° BOGENARMATUR 122 BRIDA A 67,5° SAE 3000 psi SAE 3000 CODE 61 - 90° ELBOW FLANGE SAE 3000 CODE 61 AX90B FLANGIA 90° SAE 3000 SFL 90° Bogenarmatur 123 BRIDA A 90° SAE 3000 psi SAE 3000 CODE 61 - 90° ELBOW FLANGE (LONG DROP) AX90B-L FLANGIA 90° SAE 3000 (VERSIONE ALTA) SFL 90° Bogenarmatur Sonder- SL 124 BRIDA A 90° SAE 3000 psi ( CODO LARGO ) SAE 6000 CODE 62 STRAIGHT FLANGE AY10B FLANGIA DIRITTA SAE 6000 SFS gerade 125 BRIDA RECTA SAE 6000 psi SAE 6000 CODE 62 - 45° ELBOW FLANGE SAE6000 CODE 62 AY40B FLANGIA 45° SAE 6000 SFS 45° Bogenarmatur 126 BRIDA A 45° SAE 6000 PSI SAE 6000 CODE 62 - 90° ELBOW FLANGE AY90B FLANGIA 90° SAE 6000 SFS 90° Bogenarmatur BRIDA A 90° SAE 6000 psi 26 - © Intertraco (Italia) S.p.A. All rights are reserved 127 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES PRODUCT PRODOTTO PRODUKT PRODUCTO DESCRIPTION DESCRIZIONE BESCHREIBUNG DESCRIPCIÓN PAGE PAGINA SEITE PÁGINA STAPLE LOCK MALE STAPLE LOCK ST11B RACCORDO MASCHIO PER MINIERA (STAPLE) Dichtkopf “STAPLE LOCK” 128 MACHO FIJO para miniera (staple) BRAZING TAIL WO10B INSERTO A SALDARE 129 Lötfussteil ESPIGA PARA SOLDADURA © Intertraco (Italia) S.p.A. All rights are reserved - 27 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES FERRULE S0210 skive ferrule L C BOCCOLA SKIVE Pressfassung zum Aussenschälen CASQUILLO A PELAR Ø HOSE Ø TUBO Ø SCHLAUCH EN 853 1ST Ø MANGUERA CODE CODICE SKIVE BEST.-NR CODIGO C FERRULE FOR - SAE 100 R1A - EN857 2SC (SIZES 04 TO 16);[in] S0210 INTERTRACO HOSE DN TYPE Flex INCH IT 1TSIZE [mm] [mm] S0210-04 6 1/4” 04 19 0,75 28 Flex IT SK216 S0210-05 CODICE HOSE S0210-06 BORE DN INCH SIZE S0210-08 8 5/16” 10 3/8” 12 [mm] 1/2” 05 L [in] 1,10 20 0,79 30,5 1,20 23 0,91 30 1,18 [in] 08 [mm] [in]27 1,06 32 1,26 C L 06 6 1/4" S0210-04 S0210-10 04 16 19 5/8” 0,75 10 30 1,1832 1,26 38 1,50 8 5/16" S0210-05 S0210-12 05 19 3/4” 20 0,79 12 30,5 1,2036 1,42 41,5 1,63 10 3/8" S0210-06 S0210-16 06 25 1”24 0,94 16 31,5 1,2443 1,69 47 1,85 12 1/2" S0210-08 S0210-20 08 31 1.1/4” 27 1,06 20 33 1,3052 2,05 57 2,24 16 5/8" S0210-10 S0210-24 10 38 1.1/2” 31 1,22 24 37 1,4657 2,24 76 2,99 19 3/4" S0210-12 S0210-32 12 51 2”35 1,38 32 40 1,5770 2,76 80 3,15 S0210-16 25 1" 16 43 1,69 51 2,01 S0210-24 38 1.1/2" 24 57 2,24 76 2,99 SKIVE FERRULE FOR: EN 853 1ST - SAE 100 R1A - EN857 2SC 31 1.1/4"TYPE: 20 FlexIT 1T; FlexIT 52 2,05 57 2,24 S0210-20 INTERTRACO HOSE SK216 BOCCOLA SKIVE PER TUBI: EN 853 1ST - SAE 100 R1A - EN857 2SC 51 2" FlexIT 32 70 2,76 78 3,07 S0210-32 TUBI INTERTRACO: 1T; FlexIT SK216 PRESSFASSUNG ZUM AUSSENSCHÄLEN FÜR SCHLAUCHE: EN 853 1ST - SAE 100 R1A EN857 2SC INTERTRACO-SCHLAUCH TYP: FlexIT 1T; FlexIT SK216 CASQUILLO A PELAR PARA: EN 853 1ST - SAE 100 R1A - EN857 2SC MANGUERA INTERTRACO TIPO: FlexIT 1T; FlexIT SK216 28 - © Intertraco (Italia) S.p.A. All rights are reserved B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES FERRULE S0420 skive ferrule L C BOCCOLA SKIVE Pressfassung zum Aussenschälen CASQUILLO A PELAR S0420 Ø HOSE SKIVE FERRULE FOR EN 853 2ST - SAE 100 R2A CODE Ø TUBO CODICE EN856 4SP (SIZES 04 TOØ 16); 4SH (SIZES 20 TO 32)C - SAE 100 R12 - L SCHLAUCH BEST.-NR Ø MANGUERA INTERTRACO HOSE TYPE Flex IT 2T/3X/4000/5000/6000; CODIGO INCHFlex ITSIZE [mm] 20 TO[in] [mm] Flex IT 4SP (SIZES DN 04 TO 16); 4SH (SIZES 32); S0420-04 Flex IT 4ST; Flex IT S0420-05 CODICE HOSE BORE S0420-06 DN INCH SIZE 6 1/4" 04 8 5/16" 05 10 3/8" S0420-06 S0420-12 1/4” 8 5/16” 10 3/8” 04 05 C L 06 [mm] [in] 22 0,87 24 0,94 0,87 30 1,18 24 0,94 30,5 1,20 26 1,02 32 1,26 30 1,18 34,5 1,36 33 1,30 38 1,50 [mm] [in] 30 1,18 30,5 1,20 1/2” 16 5/8” 06 19 3/4”26 1,02 12 32 38 1,26 1,50 40,5 1,59 12 1/2" S0420-08 S0420-16 08 25 1”30 1,18 16 34,5 1,36 46 1,81 53 2,09 16 5/8" S0420-10 S0420-20 19 3/4" S0420-12 10 31 33 1.1/4” 2,17 64 2,52 S0420-16 62 2,44 71 2,80 78 3,07 85 3,35 S0420-05 S0420-20 S0420-10 S0420-24 12 25 1" 16 31 1.1/4" 20 S0420-32 08 [in] 22 12 S0420-04 S0420-08 6R12 10 1,30 20 38 1,50 55 38 1,50 40,5 1,59 46 1,81 53 2,09 55 2,17 64 2,52 38 1.1/2” 51 2” 24 32 38 FOR: 1.1/2" EN 24853 2ST - SAE 100 62 R2A 2,44 71 2,80 S0420-24 SKIVE FERRULE - EN856 4SP (SIZES 04 TO 16); EN 856 4SH 51 - SAE 2" 32 R12 78 3,07 85 3,35 S0420-32 (SIZES 12 TO 32) 100 INTERTRACO HOSE TYPE: FlexIT 2T/3T/4000/5000/6000; FlexIT 4SP; FlexIT 4SH; FlexIT 4ST; FlexIT 12 BOCCOLA SKIVE PER TUBI: EN 853 2ST - SAE 100 R2A - EN856 4SP (DA SIZE 04 A SIZE 16); EN 856 4SH (DA SIZE 12 A SIZE 32) - SAE 100 R12 TUBI INTERTRACO: FlexIT 2T/3T/4000/5000/6000; FlexIT 4SP; FlexIT 4SH; FlexIT 4ST; FlexIT 12 PRESSFASSUNG ZUM AUSSENSCHÄLEN FÜR SCHLAUCHE: EN 853 2ST - SAE 100 R2A - EN856 4SP (VON GRÖSSE 04 BIS 16); EN 856 4SH (VON GRÖSSE 12 BIS 32) - SAE 100 R12 INTERTRACO-SCHLAUCH TYP: FlexIT 2T/3T/4000/5000/6000; FlexIT 4SP; FlexIT 4SH; FlexIT 4ST; FlexIT 12 CASQUILLO A PELAR PARA: EN 853 2ST - SAE 100 R2A - EN856 4SP (PULGADA DE 04 A 16); EN 856 4SH (PULGADA DE 20 A 32) - SAE 100 R12 – MANGUERA INTERTRACO TIPO FlexIT 2T/3T/4000/5000/6000; FlexIT 4SP; FlexIT 4SH; FlexIT 4ST; FlexIT 12 © Intertraco (Italia) S.p.A. All rights are reserved - 29 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES FERRULE SN03T NO-SKIVE FERRULE L C BOCCOLA NO-SKIVE Pressfassung zum Nichtschälen CASQUILLO SIN PELAR SN03T CODICE HOSE NO-SKIVE FERRULE FOR ØEN 853 1SN/2SN - SAE 100 R1AT/R2AT CODE Ø TUBO L EN857 2SC - SAE 100 R16; R17 (SIZE 10-12-16) - C CODICE Ø SCHLAUCH BEST.-NR Ø MANGUERA INTERTRACO HOSE TYPE Flex IT 1T/2T/SK216; Flex IT 4ST (SIZES 12 TO 16) CODIGO DN INCH SIZE [mm] [in] [mm] [in] SN03T-03 HOSE BORE 5 3/16” C SN03T-04 DN INCH SIZE 6 1/4” [mm] 6 1/4" SN03T-03 SN03T-05 03 SN03T-04 6 1/4" 04 8 5/16" 05 10 3/8" 06 12 1/2" 08 16 5/8" SN03T-10 SN03T-12 SN03T-05 SN03T-06 10 L 0,79 25,7 1,01 [in]23 0,91 30 1,18 0,83 05 23 0,9124 0,94 30,5 1,20 23 0,91 30 1,18 1,02 31,5 1,24 24 0,94 30,5 1,20 26 1,02 31,5 1,24 29 1,14 33,5 1,32 29 1,14 33,5 1,32 33 1,30 36 1,42 21 5/16” 3/8” [in] 04 [mm] 20 06 1/2” 16 5/8” 10 19 3/4” 33 1,30 12 36 1,4237 1,46 40 1,57 19 3/4" SN03T-12 SN03T-16 12 25 1”37 1,46 16 40 1,5746 1,81 50 1,97 25 1" SN03T-16 SN03T-20 31 1.1/4" SN03T-20 16 31 46 1.1/4” 2,32 59 2,32 20 SN03T-24 67 2,64 67 2,64 80 3,15 82 3,23 SN03T-08 SN03T-32 SN03T-10 SN03T-24 38 1.1/2" 24 51 2" 32 SN03T-32 08 26 12 SN03T-06 SN03T-08 8 03 10 1,81 20 50 1,9759 59 2,32 59 2,32 69 2,72 67 2,64 82 3,23 80 3,15 38 1.1/2” 51 2” 24 32 NO-SKIVE FERRULE FOR: EN 853 1SN/2SN - SAE 100 R1AT/R2AT - EN857 2SC - SAE 100 R16; SAE 100 R17 (SIZE 10-12-16) INTERTRACO HOSE TYPE: FlexIT 1T/2T/SK216/SC216; FlexIT 4ST BOCCOLA NO-SKIVE PER TUBI: EN 853 1SN/2SN - SAE 100 R1AT/R2AT - EN857 2SC - SAE 100 R16; SAE 100 R17 (SIZES 10-12-16) TUBI INTERTRACO: FlexIT 1T/2T/SK216/SC216; FlexIT 4ST PRESSFASSUNG ZUM NICHTSCHÄLEN FÜR SCHLÄUCHE: EN 853 1SN/2SN - SAE 100 R1AT/ R2AT - EN857 2SC - SAE 100 R16; SAE 100 R17 (GRÖSSE 10-12-16) INTERTRACO-SCHLAUCH TYP: FlexIT 1T/2T/SK216/SC216; FlexIT 4ST CASQUILLO SIN PELAR PARA: EN 853 1SN/2SN - SAE 100 R1AT/R2AT - EN857 2SC - SAE 100 R16; SAE 100 R17 (PULGADA 10-12-16) MANGUERA INTERTRACO TIPO: FlexIT 1T/2T/SK216/SC216; FlexIT 4ST 30 - © Intertraco (Italia) S.p.A. All rights are reserved B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES FERRULE SCX0T NO-SKIVE FERRULE L C BOCCOLA NO-SKIVE Pressfassung zum Nichtschälen CASQUILLO SIN PELAR SCX0T HOSE NO-SKIVE FERRULE FOR ØØEN 857 1SC/2SC CODE TUBO CODICE SAE 100 R1AT/R16/R17 -Ø SCHLAUCH BEST.-NR Ø MANGUERA INTERTRACO HOSE TYPE Flex IT SK117/SK142; CODIGO DN INCH SIZE [mm] Flex IT SK216 (SIZES 04 TO 08) SCX0T-04 CODICE SCX0T-04 SCX0T-05 SCX0T-06 SCX0T-05 HOSE BORE DN INCH SCX0T-06 SIZE 6 1/4" 04 8 5/16" 05 10 3/8" 06 SCX0T-08 SCX0T-10 SCX0T-12 12 1/2" 16 5/8" SCX0T-10 SCX0T-16 SCX0T-08 08 10 6 1/4” 8 5/16” C 10 [mm] 3/8” 04 20 0,79 22 0,87 24 0,94 12 1/2” 16 5/8” 19 3/4”28 25 1”32 L 05 [in] 06 [mm] 08 10 [in] [mm] [in] 0,79 26 1,02 22 0,87 26 1,02 [in]24 0,94 26 1,02 28 1,10 28 1,10 32 1,26 29 1,14 35 1,38 35 1,38 44 1,14 1,73 44 1,73 1,02 26 1,02 26 1,02 12 28 1,26 16 29 L 20 26 1,10 C 1,10 SCX0T-12 19 3/4" 12 35 1,38 35 1,38 SCX0T-16 25 1" 16 44 1,73 44 1,73 NO-SKIVE FERRULE FOR: EN 857 1SC/2SC - SAE 100 R1AT; SAE 100 R16; SAE 100 R17 INTERTRACO HOSE TYPE: FlexIT SK117/SK142; FlexIT SK216/SC216 BOCCOLA NO-SKIVE PER TUBI: EN 857 1SC/2SC - SAE 100 R1AT; SAE 100 R16; SAE 100 R17 TUBI INTERTRACO: FlexIT SK117/SK142; FlexIT SK216/sc216 PRESSFASSUNG ZUM NICHTSCHÄLEN FÜR SCHLÄUCHE: EN 857 1SC/2SC - SAE 100 R1AT; SAE 100 R16; SAE 100 R17 INTERTRACO-SCHLAUCH TYP: FlexIT SK117/SK142; FlexIT SK216/sc216 CASQUILLO SIN PELAR PARA: EN 857 1SC/2SC - SAE 100 R1AT; SAE 100 R16; SAE 100 R17 MANGUERA INTERTRACO TIPO: FlexIT SK117/SK142; FlexIT SK216/sc216 © Intertraco (Italia) S.p.A. All rights are reserved - 31 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES FERRULE S312T NO-SKIVE FERRULE L C BOCCOLA NO-SKIVE Pressfassung zum Nichtschälen CASQUILLO SIN PELAR S312T CODICE S312T-06 S312T-08 S312T-10 S312T-12 S312T-16 HOSE100 R12 NO-SKIVE FERRULE FOR ØØSAE CODE TUBO C CODICE INTERTRACO HOSE TYPE Flex IT 3X/4000/5000/6000/4ST; Ø SCHLAUCH BEST.-NR Ø MANGUERA Flex IT 12 (SIZES 06 TO 16) CODIGO DN INCH SIZE [mm] [in] S312T-06 HOSE BORE DN INCH S312T-08 SIZE 10 3/8" 06 12 1/2" 08 16 5/8" 10 19 3/4" 12 25 1" 16 S312T-10 S312T-12 S312T-16 10 3/8” 12 [mm] 1/2” 16 C 30 1,18 31,5 1,24 40 1,57 42 1,65 49 1,93 5/8” 19 3/4” 25 1” [mm] [in] 29 1,14 30 1,18 [in]33 1,30 33,5 1,32 30 1,18 1,46 35,5 1,40 33,5 1,32 37 1,46 42 1,65 40 1,57 40 1,57 49 1,93 54 2,13 54 2,13 L 06 [in] 08 [mm] 10 12 16 L 37 NO-SKIVE FERRULE FOR: SAE 100 R12 INTERTRACO HOSE TYPE: FlexIT 3T/4000/5000/6000/4ST; FlexIT 12 BOCCOLA NO-SKIVE PER TUBI: SAE 100 R12 TUBI INTERTRACO: FlexIT 3T/4000/5000/6000/4ST; FlexIT 12 PRESSFASSUNG ZUM NICHTSCHÄLEN FÜR SCHLÄUCHE: SAE 100 R12 INTERTRACO-SCHLAUCH TYP: FlexIT 3T/4000/5000/6000/4ST; FlexIT 12 CASQUILLO SIN PELAR PARA: SAE 100 R12 MANGUERA INTERTRACO TIPO: FlexIT 3T/4000/5000/6000/4ST; FlexIT 12 32 - © Intertraco (Italia) S.p.A. All rights are reserved B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES FERRULE S00TK NO-SKIVE FERRULE L D BOCCOLA NO-SKIVE Pressfassung zum Nichtschälen CASQUILLO SIN PELAR S00TK CODICE Ø HOSE Ø TUBO Ø SCHLAUCH Ø MANGUERA FOR SAE 100 CODE CODICE BEST.-NR NO-SKIVE CODIGO C FERRULE R7 DN INCH SIZE INTERTRACO HOSE TYPE Flex IT SK117/R7 S00TK-03 5 3/16” S00TK-04 6 1/4” 8 5/16” 10 3/8” 14 1/2” 16 5/8” 19 3/4” 21 0,83 HOSE BORE S00TK-05 DN S00TK-06 5 S00TK-08 6 S00TK-04 S00TK-10 8 S00TK-05 S00TK-12 10 S00TK-06 S00TK-03 INCH SIZE 3/16" 03 1/4" 04 5/16" 05 3/8" 06 12 16 19 [mm] [mm] [in] [mm] [in] 14 0,55 25,4 1,00 16 0,63 29,5 1,16 19 0,75 29,5 1,16 0,83 32,1 1,26 1,02 32,7 1,29 1,18 37 1,46 32,1 21 1,00 26 1,16 30 1,16 33 1,26 1,30 42,5 1,67 03 04 C [in] 0,55 0,63 0,75 05 06 08 10 12 L L [mm] 25,4 29,5 29,5 [in] S00TK-08 12 1/2" 08 26 1,02 32,7 1,29 S00TK-10 16 5/8" 10 30 1,18 37 1,46 S00TK-12 19 3/4" 12 33 1,30 42,5 1,67 S00TK-16 25 1" 16 NO-SKIVE FERRULE FOR: SAE 100 R7 INTERTRACO HOSE TYPE: FlexIT R7 BOCCOLA NO-SKIVE PER TUBI: SAE 100 R7 TUBI INTERTRACO: FlexIT R7 PRESSFASSUNG ZUM NICHTSCHÄLEN FÜR SCHLÄUCHE: SAE 100 R7 INTERTRACO-SCHLAUCH TYP: FlexIT R7 CASQUILLO SIN PELAR PARA: SAE 100 R7 MANGUERA INTERTRACO TIPO: FlexIT R7 © Intertraco (Italia) S.p.A. All rights are reserved - 33 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES FERRULE S014T NO-SKIVE FERRULE L C BOCCOLA NO-SKIVE Pressfassung zum Nichtschälen CASQUILLO SIN PELAR CODE CODICE BEST.-NR CODIGO Ø HOSE Ø TUBO Ø SCHLAUCH Ø MANGUERA C L DN INCH SIZE [mm] [in] [mm] [in] S014T-02 3 1/8” 02 14 0,55 17 0,67 S014T-03 5 3/16” 03 14 0,55 26 1,02 S014T-04 6 1/4” 04 15 0,59 30 1,18 S014T-05 8 5/16” 05 17 0,67 30 1,18 S014T-06 10 3/8” 06 19 0,75 32 1,26 S014T-08 12 1/2” 08 24 0,94 34 1,34 S014T-10 16 5/8” 10 28 1,10 37 1,46 S014T-12 19 3/4” 12 30 1,18 41 1,61 S014T-16 25 1” 16 38 1,50 45 1,77 NO-SKIVE FERRULE FOR: SAE 100 R14 INTERTRACO HOSE TYPE: FlexIT R14 BOCCOLA NO-SKIVE PER TUBI: SAE 100 R14 TUBI INTERTRACO: FlexIT R14 PRESSFASSUNG ZUM NICHTSCHÄLEN FÜR SCHLAUCH: SAE 100 R14 INTERTRACO-SCHLAUCH TYP: FlexIT R14 CASQUILLO SIN PELAR PARA: SAE 100 R14 MANGUERA INTERTRACO TIPO: FlexIT R14 34 - © Intertraco (Italia) S.p.A. All rights are reserved B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES MT10B BSPT BSPT TAPERED MALE - 60° CONE B MASCHIO BSP CONICO SV. 60° BSPT Aussengewinde - 60° KONUS MACHO FIJO BSPT CONO 60° T ES A MT10B BSPT TAPERED MALE Ø HOSE Ø TUBO SCHLAUCH HOSEØ BORE Ø MANGUERA T 5 DN3/16" INCH 03 SIZE 1/8"-28 MT10B-03-02 MT10B-03-04 5 5 3/16" 3/16” 03 03 1/4" - 19 1/8”-28 37 MT10B-04-02 MT10B-03-04 6 04 5 1/4" 3/16” 1/8"-28 03 MT10B-04-04 MT10B-04-02 6 04 6 1/4" 1/4” 1/4" - 19 04 MT10B-04-06 6 MT10B-05-06 8 MT10B-06-04 10 MT10B-06-06 10 CODE CODICE CODICE BEST.-NR CODIGO DN MT10B-03-02 MT10B-04-04 MT10B-04-06 MT10B-05-06 INCH 6 6 1/4" 5/16" 3/8" SIZE 04 3/8" - 19 [mm] 0,38 1,06 12 1.1/16" 0,472 1/2” 1/4” - 19 20,2 0,80 25,3 9,7 1,00 0,38 14 12 0,47 0,55 1/2" 14 0,551 9/16” 1/8”-28 26,5 1,04 20,2 14 0,80 0,559,7 14 0,55 0,38 9/16" 12 0,472 1/2” 0,75 3/4" 0,75 3/4" 14 0,551 9/16” 0,55 9/16" 19 0,748 3/4” 19 0,748 3/4” 04 3/8” - 19 29 27,5 24,5 MT10B-06-04 MT10B-06-08 05 3/8” - 19 29 3/8" - 19 06 1/2" - 14 1/4” - 19 32 MT10B-08-06 MT10B-06-06 12 10 1/2" 08 3/8” MT10B-08-08 MT10B-06-08 12 10 1/2" MT10B-08-12 12 MT10B-10-10 16 MT10B-10-12 16 MT10B-08-06 MT10B-08-08 MT10B-08-12 MT10B-12-12 19 12 12 5/8" 5/8" 15 0,59 0,96 14 0,55 29 1,14 14 15 19 14 0,55 0,59 0,551 9/16” 3/8" - 19 3/8” - 19 27,5 06 1,08 29 15 1,14 0,59 15 19 0,75 0,59 3/4" 19 0,748 3/4” 08 3/8” 1/2" 06 - 14 1,28 32 18 1,26 0,71 18 22 0,87 0,71 7/8" 22 0,866 7/8” 08 3/4" - 14 1,46 20 0,79 10 5/8" - 14 1,30 16 0,63 19 0,748 3/4” 10 3/4" - 14 1,65 20 0,79 22 0,866 7/8” 1/2” 1/2” 25 16 1" 16 5/8” MT10B-20-20 MT10B-12-12 MT10B-24-24 31 191.1/4" 3/4” 20 38 1.1/2" 24 MT10A-32-32 51 3/4” 1/2” - 14 32,5 08 3/8” - 19 08 1/2” - 14 3/4" - 14 08 3/4” - 14 34,5 37 1,36 10 1" - 11 5/8” - 14 45,5 1" - 11 10 33 42 27,5 32,5 15 1,08 1,28 15 18 27 24 27 3/4" 1,06 1.1/16" 0,94 15/16" 1,06 1.1/16" 0,59 0,71 0,79 1,06 1.1/16" 27 1,063 1.1/16” 33 1,79 1,46 0,79 20 27 1,30 0,91 16 36 23 0,63 1,42 24 1.7/16" 0,945 15/16” 3/4” - 14 46,5 1,83 42 23 1,65 0,91 20 36 1,42 0,79 1.7/16" 27 1,063 1.1/16” 1.1/4" 12 - 11 3/4” - 14 46,5 1.1/2" - 11 46,5 1,83 42,5 1,81 0,79 1.13/16" 27 1,063 1.1/16” 1,83 25 1,67 0,98 20 46 28 1,10 50 2,23 28 36 1,417 1.7/16” 36 1,417 1.7/16” 12 1” - 11 1” 16 1” - 11 32 37 29 1,14 1,04 14 7/8" MT10B-16-16 MT10B-10-12 25 1,08 26,5 19 0,55 0,87 5/8” 12 MT10B-16-16 0,59 24,5 1,26 19 16 3/4" 2" 15 0,59 0,75 12 3/4" 1/2” 12 19 1,14 [in] 1,14 0,59 15 19 0,96 0,71 14 22 18 MT10B-10-10 MT10B-12-16 MT10B-12-16 inin 0,83 0,799,7 27 20 8 3/8" 5/16” 06 10 3/8” 10 3/8" 06 1/2" [in] 21 1,46 1/4” 1/4" - 19 [mm] [in] 25,3 [in] 14 [in] [mm] 9/16" 1/4” - 19 06 [mm] ES ES [in] 0,55 04 3/8" - 19 [in] [mm] 1,00 B B [mm]14 0,55 1/4” 05 A A T 2" - 11 56,7 45,5 46,5 20 1,79 1,83 1,10 23 23 60 1,97 0,91 2,36 0,91 2" 2.3/8" MT10B-20-20 31 1.1/4” 20 1.1/4” - 11 50 1,97 25 0,98 46 1,811 1.13/16” MT10B-24-24 38 1.1/2” 24 1.1/2” - 11 53 2,09 28 1,10 50 1,969 2” MT10B-32-32 51 2” 32 2” - 11 56,7 2,23 28 1,10 60 2,362 2.3/8” © Intertraco (Italia) S.p.A. All rights are reserved - 35 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES MP10B BSP BSP FLAT FACE MALE B MASCHIO BSP FACCIA PIANA AGR BSP-Anschlussstutzen mit BSp ag flachdichtend MACHO FIJO BSP ASIENTO PLANO T ES A MP10B CODE CODICE CODICE BEST.-NR CODIGO BSP FLAT FACE MALE Ø HOSE Ø TUBO HOSEØBORE SCHLAUCH Ø MANGUERA DN INCH SIZE T [mm] MP10B-04-04 6 DN 1/4" INCH 04 SIZE- 19 1/4" MP10B-04-04 MP10B-06-06 10 6 3/8" 1/4” 06 04 - 19 3/8" 1/4” - 1928,5 MP10B-06-08 MP10B-06-06 10 10 3/8" 06 3/8” 1/2" 06 - 14 3/8” - 1933,5 MP10B-08-06 MP10B-06-08 12 MP10B-08-08 12 MP10B-08-12 12 MP10B-10-10 16 MP10B-08-06 MP10B-08-08 10 12 12 1/2" 08 3/8” 3/8" - 19 1/2" 08 1/2" - 14 08 3/4" - 14 10 5/8" - 14 08 - 14 3/4" 1/2" 5/8" 1/2” 1/2” 06 A A T 26 [in] [mm] 1,02 B B [mm] [in] 11 [in] [mm] 3/4" [in] 26 1,12 1,02 0,47 11 22 12 0,43 0,87 19 7/8" 0,748 3/4” 1,32 28,5 14 1,12 0,55 12 27 1,06 0,47 1.1/16" 22 0,866 7/8” 0,94 0,55 15/16" 1,063 1.1/16” 27 1,06 1.1/16" 1,26 1.1/4" 24 0,945 15/16” 1,06 1.1/16" 27 1,063 1.1/16” 1,30 0,63 16 32 16 0,63 1,26 32 1.1/4" 1,260 1.1/4” 33,5 1,32 0,47 32 1,26 14 0,55 33 1,30 16 0,63 34 1,34 14 0,55 3/4” - 1436,5 33 1,44 08 1/2” - 14 28 32 [in] 24 12 3/8” - 19 inin [in] 0,75 1,10 08 [in] [mm]19 0,43 28 1/2” - 14 [mm] ES ES 1,10 1,26 14 12 14 32 27 0,47 0,55 27 MP10B-08-12 MP10B-12-12 19 12 3/4" 1/2” 12 MP10B-10-10 16 5/8” 10 5/8” - 14 34 1,34 14 0,55 27 1,063 1.1/16” MP10B-12-12 19 3/4” 12 3/4” - 14 36,5 1,44 16 0,63 32 1,260 1.1/4” 36 - © Intertraco (Italia) S.p.A. All rights are reserved B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES © Intertraco (Italia) S.p.A. All rights are reserved - 37 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES MB10B BSP BSP MALE - 60° CONE MASCHIO BSP CILINDRICO SV. 60° AGR BSP-Anschlussstutzen 60° Konus mit BSP AG MACHO FIJO BSP CONO 60° B T ES A MB10B BSP MALE Ø HOSE Ø TUBO SCHLAUCH HOSEØ BORE Ø MANGUERA T 5 DN 3/16" INCH 03 SIZE 1/4" - 19 MB10B-03-04 MB10B-04-02 6 5 1/4" 3/16” 04 03 1/8" - 28 1/4” - 19 22 MB10B-04-04 MB10B-04-02 6 04 6 1/4" 1/4” MB10B-04-06 MB10B-04-04 6 04 6 1/4" 1/4” MB10B-04-08 6 MB10B-05-04 8 MB10B-05-06 8 CODE CODICE CODICE BEST.-NR CODIGO DN MB10B-03-04 MB10B-04-06 MB10B-04-08 MB10B-05-04 INCH 1/4" 6 5/16" 6 5/16" SIZE 04 [mm] 0,43 0,55 19 9/16" 0,748 3/4” 1/4" - 19 1/8” - 28 26,5 04 1,04 22 11 0,43 8 19 0,87 0,75 0,31 3/4" 14 0,551 9/16” 3/8" - 19 1/4” - 19 28 04 1,10 26,5 12 0,47 11 22 1,04 0,87 0,43 7/8" 19 0,748 3/4” 22 0,866 7/8” 27 1,063 1.1/16” 1/2" - 14 04 1/2” - 14 1/4" - 19 3/8" - 19 32 25 28,5 1,26 MB10B-06-08 MB10B-06-04 10 10 3/8" MB10B-08-06 12 MB10B-08-08 12 MB10B-08-10 12 MB10B-06-08 MB10B-08-06 MB10B-08-12 1/2" 10 1/2" 22 3/4" 0,866 7/8” 3/8" - 19 1/2” - 14 28,5 33,5 1,12 05 12 1,32 0,47 14 22 0,87 0,55 7/8" 27 1,063 1.1/16” 1/2" - 14 1/4” - 19 33,5 06 14 1,04 0,55 11 27 1,06 0,43 1.1/16" 19 0,748 3/4” 1,14 12 0,47 1,34 14 0,55 22 0,866 7/8” 1,32 16 0,63 27 1,063 1.1/16” 22 0,866 7/8” 3/8" - 19 3/8” 06 1/2” - 14 1/2" - 14 5/8" - 14 29 34 33,5 16 12 5/8" 10 1/2” MB10B-10-12 MB10B-08-12 10 1/2” MB10B-12-08 16 12 5/8" 19 3/4" MB10B-12-12 19 MB10B-12-16 19 1,32 26,5 28,5 33,5 1,32 12 14 27 27 0,87 7/8" 1,06 1.1/16" 1,06 1.1/16" 0,47 0,55 0,55 1,06 27 1.1/16" 1,063 1.1/16” 5/8" - 14 5/8” - 14 33,5 33,5 1,32 08 16 1,32 0,63 16 30 1,18 0,63 1.3/16" 30 1,181 1.3/16” 1,26 36 16 1,42 0,63 16 32 1,26 0,63 1.1/4" 32 1,260 1.1/4” 12 3/4" - 14 3/4” - 14 32 08 1/2" - 14 30,5 1,20 14 0,55 1,06 1.1/16" 12 3/4" - 14 1,44 16 0,63 1,26 1.1/4" 27 1,063 1.1/16” 1,59 19 0,75 1,61 1.5/8" 30 1,181 1.3/16” 32 1.5/8" 1,260 1.1/4” 5/8” 5/8” 10 5/8” - 14 25 16 1" 5/8” 16 10 1" - 11 3/4” - 14 41,5 MB10B-12-08 MB10B-16-20 25 19 1" 3/4” 16 MB10B-20-20 MB10B-12-12 12 1" - 11 36,5 40,5 29 1,30 1,12 22 0,47 1,26 1/2” - 14 MB10B-10-12 MB10B-16-16 28,5 0,98 1,14 0,63 12 32 1,34 0,55 14 27 14 10 3/4" 7/8" 0,47 0,75 05 1/4" - 19 3/8” - 19 25 MB10B-10-10 MB10B-08-10 16 0,87 0,55 3/4” MB10B-08-08 MB10B-10-08 MB10B-10-10 3/4" 0,748 08 3/8” - 19 33 3/4" - 14 08 1/2" - 14 1/2” - 14 30,5 3/4" 22 0,75 0,47 19 3/8” - 19 12 16 14 1.1/16" 1.1/16" 12 1/2" 1/2” 08 16 12 5/8" 1/2” 10 MB10B-10-08 0,47 19 1,06 0,43 1,06 06 08 12 12 27 [in] 1,04 11 27 14 0,55 1,12 11 0,43 12 19 3/8” 08 0,43 1,26 1,12 10 8 3/8" 5/16” 06 10 11 32 MB10B-06-06 MB10B-05-08 MB10B-06-06 0,55 1,10 0,98 MB10B-05-06 MB10B-06-04 08 14 28 05 1/4” - 19 33,5 26,5 1/2" - 14 1,32 1/2" inin 1,02 8 0,31 11 14 1/4” 06 3/8” [in] 25,8 0,87 3/8” - 19 8 [mm] [in] 26,5 [in] 11 [in] [mm] 3/4" 8 5/16" 5/16” 05 8 5/16” 10 3/8" 06 MB10B-05-08 [mm] ES ES [in] 0,75 04 05 [in] [mm] 1,04 B B [mm]19 0,43 1/4” 05 A A T 34 1,20 34 33,5 16 1,34 1,32 36 1,63 1,42 19,5 12 - 11 1/2” - 14 47 1.1/4" 34,5 1,85 31 191.1/4" 3/4” 20 1.1/4" 12 - 11 3/4” - 14 48,5 1,91 36,5 MB10B-24-24 38 1.1/2" 24 1.1/2" - 11 48,5 MB10A-32-32 51 2" 32 2" - 11 61,2 38 - © Intertraco (Italia) S.p.A. All rights are reserved 14 16 27 32 41 0,55 0,63 1.1/4" 0,77 16 41 0,63 1,61 1,36 21,5 0,85 14 50 0,55 1,97 27 2" 1,063 1.1/16” 21,5 1,44 0,85 16 50 1,97 0,63 2" 32 1,260 1.1/4” 1,91 21,5 0,85 55 2,17 2.3/16" 2,41 25 0,98 70 2,76 2.3/4" ➔ B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES CODE CODICE BEST.-NR CODIGO Ø HOSE Ø TUBO Ø SCHLAUCH Ø MANGUERA A T DN INCH SIZE MB10B-12-16 19 3/4” 12 MB10B-16-16 25 1” MB10B-16-20 25 MB10B-20-20 B ES [mm] [in] [mm] [in] [mm] [in] 1” - 11 40,5 1,59 19 0,75 41 1,614 1.5/8” 16 1” - 11 41,5 1,63 19 0,75 41 1,614 1.5/8” 1” 16 1.1/4” - 11 46,5 1,83 20 0,79 50 1,969 2” 31 1.1/4” 20 1.1/4” - 11 48 1,89 20 0,79 50 1,969 2” MB10B-24-24 38 1.1/2” 24 1.1/2” - 11 50 1,97 22 0,87 55 2,165 2.3/16” MB10B-32-32 51 2” 32 2” - 11 63,5 2,50 25 0,98 70 2,756 2.3/4” [in] © Intertraco (Italia) S.p.A. All rights are reserved - 39 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES FB11B BSP BSP FEMALE SWIVEL - 60° CONE FEMMINA BSP DIRITTA CONO 60° DKR BSP Dichtkopf 60° Konus BSP Gewinde HEMBRA GIRATORIA RECTA BSP CONO 60° T CH A FB11B CODE CODICE CODICE FB11B-03-02 BEST.-NR CODIGO FB13B-03-04 B BSP FEMALE SWIVEL Ø HOSE HOSE BORE DN 6 5 A Ø TUBO T SIZE Ø SCHLAUCH 1/4"Ø MANGUERA 03 1/8" - 19 INCH B T21,5 [in] [mm] 0,85 03 1/4" - 19 16,8 0,66 1/4" 04 1/8" - 19 04 1/4" - 19 1/8” - 28 0,85 1/4" 03 21,5 17,5 0,69 6 51/4" 3/16” 3/8" -03 04 19 1/4”18,5 - 19 0,73 FB11B-05-04 FB11B-04-02 8 5/16" 6 05 19 1/4” 1/4" -04 1/8”17,8 - 28 0,70 FB13B-05-06 8 5/16" 05 3/8" - 19 FB11B-05-08 8 5/16" 05 1/2" - 14 04 1/4” - 19 FB13B-04-06 10 FB11B-06-04 63/8" 1/4” 1/4" -04 06 19 3/8”17,8 - 19 0,70 FB13B-06-06 FB11B-05-04 10 83/8" 06 19 5/16” 3/8" -05 1/4”18,5 - 19 0,73 FB13B-06-08 10 3/8" 06 1/2" - 14 FB11B-08-06 12 1/2" 08 3/8" - 19 FB11B-04-02 6 FB13B-04-04 6 FB13B-03-04 FB13B-04-06 FB11B-03-02 FB13B-04-04 FB13B-05-06 3/16" DN [mm] 5 6 8 FB11B-05-08 12 FB13B-08-08 81/2" FB11B-08-10 FB11B-06-04 12 1/2" 10 FB11B-08-12 12 FB11B-10-10 16 FB13B-06-06 25 FB12B-16-20 25 FB11B-08-10 20,5 0,81 20,5 0,81 19,5 0,77 [in] 5,5 0,22 14 0,55 4,2 [mm] 0,75 [mm] 0,17 19 5,5 0,22 14 4,2 0,17 19 16,8 6 0,66 0,24 22 154,2 14,3 0,28 14 0,551 9/16” 4,2 0,87 0,17 7/8" 19 0,748 3/4” 3/4" 0,22 14 0,551 9/16” 0,75 3/4" 7 0,75 5,5 22 0,87 7 0,28 27 18,5 4,2 0,73 0,17 6 17,8 0,24 0,70 6,5 6 1,06 1.1/16" 0,17 19 0,748 3/4” 19 60,75 0,24 3/4" 22 0,866 7/8” 22 0,87 4,2 7/8" 0,17 19 0,748 3/4” 0,26 27 1,06 1.1/16" 0,24 22 0,87 0,24 7/8" 22 0,866 7/8” 0,83 20,5 6,5 0,81 0,26 27 71,06 0,28 1.1/16" 27 1,063 1.1/16” 9,5 17,8 0,37 0,70 27 1,06 4,2 1.1/16" 0,17 19 0,748 3/4” 8,7 0,34 32 1,26 1.1/4" 9,5 0,37 27 1,06 0,24 22 0,866 7/8” 0,34 32 6,5 1,26 1.1/16" 0,26 27 1,063 1.1/16” 0,34 0,77 32 61,26 1.1/4" 0,24 22 0,866 7/8” 1,50 6,5 1.1/2" 1,50 1.1/2" 0,26 27 1,063 1.1/16” 0,37 2" 27 1,063 1.1/16” 3/8” 0,89 18 0,71 06 3/8” - 19 3/4" - 14 06 1/2”21,5 - 14 12 14 1/2” 3/4" -08 3/8” 22 - 19 3/8” 12 1" - 11 1" 16 1" - 11 16 1/2” 1/2” 18,5 0,87 8,7 19,5 27 1,06 10,5 0,41 38 28 1,10 10,5 0,41 38 0,39 50 9,5 1,97 0,92 0,39 50 8,7 1,97 0,34 2" 32 1,260 1.1/4” 27 1,063 1.1/16” 0,34 32 1,260 1.1/4” 8,7 0,34 32 1,260 1.1/4” 1/2” - 14 1.1/4" - 11 08 5/8”36,4 - 14 21 1,43 1810 1,41 23,3 10 FB12B-20-24 FB11B-10-10 31 1.1/4" 16 20 1.1/2" - 11 5/8” 35 - 14 FB12B-24-24 38 1.1/2" 24 1.1/2" - 11 FB12A-32-32 10 3/8" 32 5/8” 1812 0,47 55 2,17 9,5 2.3/16" 1,38 12 0,47 55 2,17 2.3/16" 39,9 0,70 16,1 0,17 70 0,75 3/4" 3/4” - 14 12 FB12B-12-16 FB11 19 3/4” 12 1” 16 FB121” 0,71 1,38 3/4” - 14 3/4” 0,83 1.1/4" 35 10 19 0,81 6 20,5 8,7 08 10 0,73 6 0,85 3/4”35,9 - 14 5/8” 0,73 4,2 1/4”18,5 - 19 0,73 22,5 18,5 0,69 7/8" [in] 1/2” 21 - 14 3/4" 25 [in] 19 1/2” 1.1/4"08 20 - 11 FB12B-16-16 [mm] 0,24 12 1.1/4" FB11B-12-12 [in] 0,17 0,59 17,5 3/4" 9/16" 08 14 3/8” 5/8" -06 10 16 0,56 CH inin 9/16" 0,55 6 FB11B-08-12 31 FB12B-20-20 FB11B-10-12 [in] B 5/16” 1/2" -05 08 14 5/8" - 14 121" 0,73 [mm] 3/8” - 19 10 12 18,5 CH [in] 05 5/8" 10 3/4" 12 FB13B-08-08 5/16” 3/4" - 14 FB11B-12-12 FB11B-08-06 19 FB12B-16-16 1/4” 08 10 5/8" 19 3/16” SIZE 1/2" FB13B-06-08 16 FB11B-10-12 FB12B-12-16 INCH A 21,3 21,8 0,71 0,84 0,86 8,7 0,37 - 11 27 1,06 FB1310,5 0,41 38 1,496 1.1/2” 1” - 11 28 1,10 0,41 38 1,496 1.1/2” 10,5 ➔ 40 - © Intertraco (Italia) S.p.A. All rights are reserved B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES T CH CODE CODICE BEST.-NR CODIGO Ø HOSE Ø TUBO Ø SCHLAUCH Ø MANGUERA DN FB12B-16-20 25 FB12B-20-20 31 FB12B-20-24 A INCH SIZE 1” 16 FB11B 1.1/4” 31 CODICE 1.1/4” FB12B-24-24 38 1.1/2” FB12B-32-32 51 FB12B-32-32 2” FB11B-03-02 A T B B CH [mm] [in] [mm] [in] [mm] [in] 1.1/4” - 11 36,4 1,43 10 0,39 50 1,969 2” 20 1.1/4” - 11 HOSE BORE 20 1.1/2” - 11 35,9 1,41 A 1,49 10 0,39 50 55CH 1,969 2” 2,165 2.3/16” BSP FEMALE SWIVEL DN INCH SIZE 6 1/4" 03 32 10 3/8" 2” 32 - 11 24 1.1/2” - 11 T 37,8 35,8 1/8" - 19 39,9 2" - 11 12 B 0,47 [mm] [in] [mm] [in] [mm] 21,5 0,85 5,5 0,22 14 16 16 0,63 70 0,17 1,57 39,90,700,70 12 0,47 [in] 55 inin [in] 0,551 9/16" 2,165 2.3/16” 70 0,748 2,756 3/4" 2.3/4” Nut type FB11 FB12 FB13 NUT TYPE TIPO DI DADO HUTTER TYP TIPO DE TUERCA © Intertraco (Italia) S.p.A. All rights are reserved - 41 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES FB41B BSP A A CH DKR 45° - 60° KONUS HEMBRA GIRATORIA A 45° BSP CONO 60° B T T D D CH BSP FEMALE SWIVEL - 60° CONE 45° ELBOW FEMMINA BSP 45° CONO 60° B FB41B CODE CODICE BEST.-NR CODICE CODIGO FB43B-04-04 Ø HOSEBSP FEMALE SWIVEL - 45° ELBOW BSP FEMALE SWIVEL - 45° ELBOW FB41B Ø TUBO A B D Ø SCHLAUCH HOSE BORE A B D T T Ø MANGUERA HOSE BORE [mm] [in] [mm] A B [in] [mm] [in] DN INCH SIZE CODICE T DN INCH SIZE [mm] [in] [mm] [in] [mm] [in] 6 FB43B-04-04 FB43B-04-06 1/4" 04 DN- 19 INCH 1/4" SIZE31,5 1,24 1/4” 0404 FB43B-04-04 1/4" 86 FB43B-04-06 1/4” 0504 5/16" 3/8” 19 3/8"6 - 19 -1/4" 04 - 19 45,5 1,79 42,5 3/8" 1,67 FB43B-06-06 FB41B-05-06 10 8 FB41B-05-06 3/8" 5/16” 0605 3/8"8 - 19 -5/16" 3/8” 19 05 39 42,5 3/8" - 19 1,54 1,67 1,67 15196 6 42,5 0,24 0,24 FB43B-06-08 FB43B-06-06 10 10 FB43B-06-06 3/8" 06 06 52,5 3/8" - 19 2,07 39 1,54 39 0,261,54 16,5 6 6,5 6 0,24 15 FB43B-08-08 12 FB43B-06-08 1/2" 08 10- 14 3/8" 1/2" 3/8” - 19 FB41B-10-10 16 FB43B-08-08 5/8" 10 12- 14 1/2" 5/8" 08 61,5 1/2" - 14 2,42 FB41B-10-12 16 FB41B-10-10 5/8" 10 16- 14 5/8" 3/4" 10 62,5 5/8" - 14 2,46 FB41B-10-12 FB42B-16-16 16 25 FB41B-12-12 5/8” 1610 1" 3/4” 14 1"19 - 11 -3/4" FB42B-20-20 FB41B-12-12 31 19 FB42B-16-16 1.1/4" 3/4” 2012 FB42B-20-24 FB42B-16-16 31 25 FB42B-20-20 1.1/4" 2016 1” FB42B-24-24 38 FB42B-20-24 1.1/2" 24 FB42A-32-32 51 FB42B-24-24 2" 32 FB43B-06-08 10 FB43B-08-08 12 FB41B-10-10 FB41B-12-12 16 19 FB42B-20-20 31 FB42B-20-24 FB42B-24-24 FB42B-32-32 31 3/8” 06 3/8” 06 1/2” 08 5/8” 1210 FB41B-10-12 3/4" 1.1/4” 20 1.1/4” 20 FB42B-32-32 10- 14 3/8" 1/2" 1/2” - 14 1/2” - 14 5/8” - 14 16 3/4" - 14 5/8" 31,5 1,24 04 - 19 45,5 1/4" 1,79 4,2[mm] 0,17[in] 13[mm] 0,51 6 6 FB43B-04-06 FB41B-05-06 1/4” - 19 3/8"6 - 19 1/4" CH CH D CH [mm] [in] inin [mm] [in] [in] [in] [mm] [in] [mm] [in] 06 46 52,5 46 1/2" - 14 1,81 3/4" inin 3/4" 7/8" 7/8" 0,24 15 0,591.1/16" 22 0,866 0,65 0,59 27 221,0630,866 7/8” 27 1,063 6,552,5 0,262,07 18 6,5 0,710,26 27 16,51,0630,651.1/16" 7/8" 1.1/16" 27 9,5 46 0,371,81 22,86,5 0,900,26 27 18 1,0630,711.1/16" 1.1/16" 6,5 1,81 6,561,5 0,26 2,42 8,7 0,26 0,34 16,5 0,65 27 1,063 1.1/16” 18 0,71 27 1,063 1.1/16” 1,063 1,063 0,901.1/4"27 29 9,5 1,140,37 32 22,8 1,2598 1.1/16" 9,5 0,37 22,8 0,90 27 1,063 1.1/16” 1,14 1,260 8,762,5 0,342,46 28,38,7 1,110,34 32 291,2598 1.1/4"32 12 3/4" 14 70 2,76 8,7 0,34 28,3 1,11 32 1,260 62,5 8,7 0,34 3229 1,26 1,14 38 321,49611,260 83,5 2,46 3,29 10,5 0,41 1.1/2" 1.1/4” 1.1/4" 25 1" 1.1/4" - 11- 14 3/4” 16 - 11 104,5 1" 4,11 70,1 2,76 3,29 37,7 10,5 1,48 0,41 50 32 321,9685 1,26 1,496 1083,5 0,39 8,7 0,34 28,3 1,11 1,2602" 381.1/4” 1.1/2" 31 - 111.1/4" 1.1/2" 1” - 11 20 122 1.1/4" - 11 12104,5 0,474,11 54 10 2,130,39 55 37,7 1,482.3/16" 50 1,969 4,80 83,5 3,29 10,5 0,41 32 1,26 382,16541,496 1.1/2” 20132,4 1.1/2" 11 122 4,80 12 0,47 54 2,13 55 2,165 5,21 12 0,47 51,5 2,03 55 2,1654 2.3/16" 2.3/16" 24147,5 1.1/2" - 11 5,81 2.3/16" 31 - 111.1/4" 1.1/2" 1.1/4” - 11 2"38 - 11 1.1/2" 1.1/2” -2"11 51 97,5 3,84 10 0,39 122 32 4,80 2" - 11 12147,5 0,47 5,81 1.1/2” 24 1.1/2” - 11 119 4,68 12 0,47 51 2” 32 2” - 11 149,8 5,90 16 0,63 FB42 Nut type FB41 NUT TYPE TIPO DI DADO HUTTER TYP TIPO DE TUERCA 42 - © Intertraco (Italia) S.p.A. All rights are reserved FB42 36,3 1,43 50 1,969 5416 2,13 0,63 55 60 2,165 702.3/16” 2,36 2,756 49,2 2,03 55 2,165 2.3/16” 60 2,36 70 2,756 2.3/4” 2,032.3/4"55 16132,4 0,635,21 60 12 2,360,47 70 51,5 2,7559 38 FB41 0,748 0,24 22 22 190,8661 0,75 0,866 0,59 7/8"22 7/8” 0,75 0,866 2,07 61,5 2,42 10 - 14 70 3/4" 2,76 19 4,2 0,17 13 0,51 19 0,748 3/4” 0,51 0,748 6 31,5 0,241,24 14,54,2 0,570,17 22 130,8661 7/8"19 1,79 19 6 0,75 0,24 22 14,5 0,57 0,866 6 0,24 14,5 0,57 220,8661 0,866 6 45,5 0,24 7/8"22 7/8” FB43 FB43 2” 2,165 1.1/4" 2" 2.3/4" B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES © Intertraco (Italia) S.p.A. All rights are reserved - 43 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES FB91B BSP BSP FEMALE SWIVEL - 60° CONE 90° ELBOW FEMMINA BSP 90° CONO 60° A DKR 90° - 60° KONUS B D HEMBRA GIRATORIA A 90° BSP CONO 60° T FB91B CODE CODICE BEST.-NR CODIGO CODICE CH Ø HOSE Ø TUBOBSP FEMALE Ø SCHLAUCH T Ø MANGUERA HOSE BORE T DN INCH INCH SIZE SIZE DN SWIVEL - 90° ELBOW A B D A [mm] [mm] [in] [in] B D [mm] [in] [in] [mm] [mm] [mm] [in] [in] CH CH [mm][in] [in] [mm] [in] inin FB93B-04-04 FB93B-04-04 66 1/4" 1/4” 0404 1/4"1/4” - 19 - 19 27,5 27,5 1,08 1,08 4,2 4,2 0,17 0,17 27 27 1,06 1,06 19 19 0,7480,748 3/4" 3/4” FB93B-04-06 FB93B-04-06 66 1/4" 1/4” 0404 27,5 27,5 1,08 1,08 66 0,24 0,24 29,5 29,5 1,16 1,16 22 220,8661 7/8" 0,866 7/8” FB93B-05-06 8 5/16" 05 3/8"3/8” - 19 - 19 3/8" - 19 32,5 1,28 6 0,24 30 1,18 22 FB93B-06-06 10 3/8" 06 3/8" - 19 0,24 30 1,18 22 FB93B-06-08 10 3/8" 06 1/2" - 14 1,26 27 FB93B-06-08 FB93B-08-08 10 12 3/8” 1/2" 0806 1,26 1,44 27 27 1,0631,063 1.1/16"1.1/16” FB93B-08-08 FB91B-08-10 12 12 1/2” 1/2" FB91B-10-10 FB91B-08-10 16 12 FB91B-10-12 FB91B-10-10 FB91B-12-12 FB93B-05-06 3/8” - 19 32,5 1,28 3/8” - 19 32,5 1,28 1,28 6,5 1/2"1/2” - 14 - 14 32,5 39 0808 5/8"1/2” - 14 - 14 5/8" 1/2” 1008 5/8"5/8” - 14 - 14 16 16 5/8" 10 3/4" - 14 19 3/4" 12 3/4" - 14 FB92B-12-16 19 3/4" 12 1" - 11 FB92B-16-16 25 1" 16 1" - 11 FB92B-12-16 FB92B-16-20 19 25 3/4” 1" 1612 - 11 1.1/4"1” - 11 FB92B-16-16 FB92B-20-20 25 31 1” 1.1/4" 2016 - 11 1.1/4"1” - 11 FB92B-24-24 FB92B-16-20 38 25 1.1/2" 1” 2416 1.1/2" - 11 - 11 1.1/4” FB92A-32-32 51 31 2" 1.1/4” 38 1.1/2” FB93B-06-06 FB91B-10-12 FB91B-12-12 FB92B-20-20 FB92B-24-24 FB92B-32-32 8 10 16 19 FB91 51 5/16” 3/8” 5/8” 5/8” 3/4” 2” 05 06 10 10 12 32 20 24 32 7/8" 1,063 1.1/16" 6 0,24 0,26 32 1,28 1,54 6,5 6,5 0,26 0,26 32 36,5 41,7 46,5 1,64 1,83 6,5 9,5 0,26 0,37 36,5 1,44 27 27 1,0631,063 49 1,93 1.1/16"1.1/16” 2,17 1,77 9,5 9,5 0,37 0,37 49 1,93 1.1/16"1.1/16” 42,3 1,65 27 27 1,0631,063 49,5 1,95 55,5 2,19 8,7 9,5 0,34 0,37 8,7 0,34 58,8 2,31 32 0,41 62 2,44 38 32,5 4555 5/8” - 14 0,8661 0,24 62,5 1,28 2,46 6 30 1,18 7/8" 6 32,5 30 0,8661 1,18 22 22 0,866 7/8” 0,866 7/8” 51 2,01 1.1/4" 49,3 1,94 32 271,2598 1,063 1.1/16” 1,4961 1.1/2" 1,4961 1.1/2" 2,17 8,7 0,34 3/4” - 14 56 2,20 8,7 0,34 0,41 71 2,80 38 6079 2,36 3,11 10,5 10 0,41 0,39 62 83 2,44 3,27 1,4962" 50 381,9685 1.1/2” 71,5 89,6 2,81 3,53 1,4962" 50 381,9685 1.1/2” 71,5 2" - 11 2,36 2,81 10,5 10,5 2,17 32 1,260 1.1/4” 32 1,260 1.1/4” 10,5 10 0,41 0,39 71 83 2,80 3,27 79114 4,49 3,11 12 10 0,47 0,39 108 83 4,25 2.3/16" 3,27 55 502,1654 1,969 2” 130 5,12 16 0,63 128 5,04 1.1/4” - 11 82,5 3,25 10 0,39 1.1/2” - 11 102 4,02 12 0,47 2” - 11 55 2,20 1.1/4" 55 60 55,8 1,2598 3/4” - 14 FB92 132,3 5,21 16 0,63 77 100 FB93 128 3,03 70 2,7559 2.3/4" 50 1,969 2” 3,94 55 2,165 2.3/16” 5,04 70 2,756 2.3/4” ➔ 44 - © Intertraco (Italia) S.p.A. All rights are reserved CODICE B HOSE BORE DN INCH SIZE T A [mm] B [in] [mm] D [in] [mm] CH [in] [mm] [in] TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES 6 UNIVERSALE 1/4" 04 3/8"TUBI - 19 TRECCIATI 27,5 1,08 6 0,24 29,5 1,16 22 0,866 FB93B-04-06- SERIE RACCORDI A PRESSARE PER E 4 SPIRALI 8 5/16"FÜR05GEFLECHT 3/8" - 19- UND 32,5 1,28 6 0,24 30 1,18 22 0,866 FB93B-05-06 PRESSARMATUREN UNIVERSALSERIE SPIRALSCHLÄUCHE 10 3/8" 06 3/8" 19 32,5 1,28 6 0,24 30 1,18 22 0,866 FB93B-06-06 RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES FB93B-04-04 6 1/4" 04 1/4" - 19 27,5 1,08 4,2 0,17 27 1,06 19 0,748 inin 3/4" 7/8" 7/8" 7/8" FB93B-06-08 10 3/8" 06 1/2" - 14 32,5 1,28 6,5 0,26 32 1,26 27 1,063 1.1/16" FB93B-08-08 12 1/2" 08 1/2" - 14 39 1,54 6,5 0,26 36,5 1,44 27 1,063 1.1/16" FB91B-08-10 12 1/2" 08 5/8" - 14 46,5 1,83 9,5 0,37 49 1,93 27 1,063 1.1/16" FB91B-10-10 16 5/8" 10 5/8" - 14 55 2,17 9,5 0,37 49 1,93 27 1,063 1.1/16" FB91B-10-12 16 5/8" 10 3/4" - 14 49,5 1,95 8,7 0,34 51 2,01 32 1,260 1.1/4" FB91B-12-12 19 3/4" 12 3/4" - 14 62,5 2,46 8,7 0,34 58,8 2,31 32 1,260 1.1/4" FB92B-12-16 19 3/4" 12 1" - 11 60 2,36 10,5 0,41 62 2,44 38 1,496 1.1/2" FB92B-16-16 25 1" 16 1" - 11 71,5 2,81 10,5 0,41 71 2,80 38 1,496 1.1/2" FB92B-16-20 25 1" 16 1.1/4" - 11 79 3,11 10 0,39 83 3,27 50 1,969 2" FB92B-20-20 31 1.1/4" 20 1.1/4" - 11 89,6 3,53 10 0,39 83 3,27 50 1,969 2" FB92B-24-24 38 1.1/2" 24 1.1/2" - 11 114 4,49 12 0,47 108 4,25 55 2,165 2.3/16" FB92B-32-32 51 2" 32 2" - 11 130 5,12 16 0,63 128 5,04 70 2,756 2.3/4" Nut type FB91 FB92 FB93 NUT TYPE TIPO DI DADO HUTTER TYP TIPO DE TUERCA B Series Catalogue_Rev02.2007.xls The document is exclusive property of INTERTRACO S.p.A.. All rights are reserved. © Intertraco (Italia) S.p.A. All rights are reserved - 45 Pag B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES KM91B BSP BSP FEMALE SWIVEL 60° CONE - 90° ELBOW (COMPACT FORGED) A FEMMINA BSP COMPATTA 90° CONO 60° D DKR BSP-Dichtkopf Kompakt 90° UNF-Gewinde 60° KONUS B HEMBRA GIRATORIA A 90° COMPACTA BSP CONO 60° T KM91B CODE CODICE BEST.-NR CODICE CODIGO CH Ø HOSEBSP FEMALE Ø TUBO Ø SCHLAUCH T Ø MANGUERA HOSE BORE T DN INCH INCH SIZE SIZE DN SWIVEL - 90° ELBOW (COMPACT FORGED) KM91B-04-04 KM91B-04-04 66 1/4" 1/4” 04 04 1/4"1/4” - 19 - 19 KM91B-06-06 10 06 3/8" - 19 KM91B-08-08 10 3/8" 12 1/2" 08 KM91B-10-10 16 5/8" 10 KM91B-12-12 19 3/4" 12 KM91B-12-12 KM91B-16-16 19 25 3/4” 1" KM91B-16-16 25 1” KM91B-06-06 KM91B-08-08 KM91B-10-10 12 16 3/8” 1/2” 5/8” 06 08 10 16 12 16 3/8” - 19 1/2" - 14 A B A [mm] [in] [in] [mm] B [mm] [mm] [in] [in] 17,5 17,5 0,69 0,69 6,5 6,5 0,26 0,26 23,5 3/4" 23,5 0,93 0,93 19 19 0,7480,748 3/4” 21,5 0,85 0,85 6,5 6,5 0,26 0,26 25,5 25,5 1,00 22 7/8” 25,5 1,00 9 0,35 28 1,10 27 9 0,35 27 1,06 28 9 0,35 36 1,42 32 26,5 30,5 1,04 1,20 9 10,5 0,35 0,41 36 34,5 30,5 10,5 0,41 21,5 25,5 1,00 9 5/8” - 14 22,5 0,89 9 3/4" - 14 1" 3/4” - 11 - 14 1” - 11 CH D [mm] [mm] 1/2” - 14 5/8" - 14 D 22,5 26,5 46 - © Intertraco (Italia) S.p.A. All rights are reserved 0,89 1,04 1,20 0,35 0,35 28 27 34,5 CH [in] [in] [mm] [mm][in] 1,00 1,10 1,06 [in] inin [in] 0,8661 7/8" 1,063 1.1/16" 1,1024 1.1/8" 1,2598 1.1/4" 22 27 30 0,866 1,063 1.1/16” 1,181 1.1/8” 1,42 38 321,49611,260 1,36 1.1/2" 1.1/4” 1,36 41 1,614 1.1/2” B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES FP11B BSP BSP FLAT FACE FEMALE SWIVEL CH FEMMINA BSP FACCIA PIANA DIRITTA BSP flachdichtend BSP Gewinde T HEMBRA GIRATORIA RECTA BSP CON ASIENTO PLANO A FP11B B BSP FLAT Ø HOSE Ø TUBO SCHLAUCH HOSEØBORE T Ø MANGUERA CODE CODICE BEST.-NR CODICE CODIGO DN FP11B-06-06 10 FP11B-06-08 10 FP11B-06-08 FP11B-08-08 12 10 1/2" 3/8” 08 FP11B-08-12 FP11B-08-08 12 12 1/2" FP11B-12-12 FP11B-08-12 FP11B-12-12 FP11B-06-06 INCH DN 3/8" SIZE INCH 06 10 3/8" 3/8” 06 FACE FEMALE SWIVEL SIZE 3/8" - 19 06 1/2"-14 A A T [mm] 15,7 B B [in] [mm] [in] [mm] 0,62 9 0,35 22 [mm] 15,7 0,63 06 1/2"-14 3/8” - 19 16 1/2”-14 16,5 08 1/2” 3/4" 08 - 14 1/2”-14 21,5 19 12 3/4" 12 1/2” 3/4" 08 - 14 3/4” - 14 19 19 3/4” 12 3/4” - 14 [in] [mm] CH CH [in] [in] 0,87 inin [mm] [in] 22 0,866 7/8” 7/8" [in] 0,35 1,06 1.1/16" 16 0,65 0,62 0,41 9 27 0,63 0,3910,5 27 10 0,41 1,06 27 1.1/16" 1,063 1.1/16” 0,85 16,5 11,5 0,65 0,4510,5 32 1,26 0,41 1.1/4" 27 1,063 1.1/16” 0,75 21,5 12,5 0,85 0,4911,5 32 1,26 0,45 1.1/4" 32 1,260 1.1/4” 0,45 32 1,260 1.1/4” 19 10,5 0,75 11,5 © Intertraco (Italia) S.p.A. All rights are reserved - 47 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES BB10B BSP BSP BANJO A BANJO BSP Ringnippel BSP E ORIENTABLE BANJO BSP C BB10B CODE CODICE CODICE BEST.-NR CODIGO BSP BANJO Ø HOSE Ø TUBO HOSEØBORE SCHLAUCH DN INCH SIZE Ø MANGUERA BB10B-04-02 6 BB10B-04-04 BB10B-04-02 6 BB10B-04-06 6 BB10B-05-06 8 BB10B-06-06 10 BB10B-06-08 10 BB10B-06-06 BB10B-08-08 BB10B-04-04 BB10B-04-06 DN1/4" T T A [mm] 04 INCH 1/8" - 19 SIZE 22 04 6 1/4" 1/4” 1/4" - 19 04 1/8” - 2822 6 5/16" 04 1/4” 05 3/8" - 19 04 3/8" - 19 [in] E C [mm] [in] 0,87 [mm] 3,18 0,13 [in] 0,87 22 6,35 0,87 0,25 23 0,91 9,53 23 0,91 9,53 24 0,94 9,53 26 1,02 12,7 24 1,06 12,7 0,94 0,50 1/4” - 19 22 0,38 [in] 10 0,39 [mm] [in] [mm] [in] 10 0,39 0,52 14 0,55 0,66 18 0,71 0,66 18 0,71 16,8 22 0,87 0,66 18 0,71 14 0,55 0,40 10,2 18 0,71 18 0,71 18 0,71 22 0,87 13,3 04 3/8” - 19 5/16” 05 3/8” - 19 12 101/2" 3/8” 08 06 1/2" - 14 3/8” - 1927 BB10B-10-10 BB10B-06-08 16 105/8" 3/8” 10 5/8" - 14 06 1/2” - 1428 1,10 0,63 26 15,88 1,02 24 21 0,94 0,83 22 0,87 BB10B-12-12 BB10B-08-08 19 123/4" 1/2” 12 3/4" - 14 08 1/2” - 1436,5 1,44 0,75 27 19,05 1,06 29 21 1,14 0,83 22 0,87 BB10B-16-16 25 1,75 37 1,46 0,91 24 0,94 BB10B-10-10 8 3/8" 3/8" 16 1" 06 06 16 3/8" - 19 1/2" - 14 1" - 11 44,5 5/8” 10 5/8” - 14 23 0,38 0,87 [mm] E 1/4” BB10B-05-06 6 1/4" A C 23 28 25,4 0,91 16,8 0,91 16,8 0,38 0,50 1,00 1,10 23,1 BB10B-12-12 19 3/4” 12 3/4” - 14 36,5 1,44 26,5 1,04 29 1,14 BB10B-16-16 25 1” 16 1” - 11 44,5 1,75 33,5 1,32 37 1,46 48 - © Intertraco (Italia) S.p.A. All rights are reserved B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES VB10B BSP BSP BANJO BOLT L VITE FORATA BSP B ES Hohlschraube BSP Gewinde T TORNILLO BSP PARA ORIENTABLE BANJO VB10B BSP BANJO BOLT CODICE T VB10B-02 VB10B-04 VB10B-06 VB10B-08 VB10B-10 VB10B-12 VB10B-16 CODE CODICE BEST.-NR CODIGO VB10B-02 VB10B-04 B L ES [mm] [in] [mm] [in] [mm] [in] inin 1/8" - 28 19 0,75 24 0,94 14 0,55 1/4" - 19 25 0,98 32 1,26 19 B0,75 9/16" 3/8" - 19 31 1,22 38 1,50 22 0,87 7/8" 1/2" - 14 38 1,50 46 1,81 27 1,06 1.1/16" 5/8" - 14 41 1,61 49 1,93 30 1,18 1.3/16" 0,751.1/4" 1,26 69 2,72 41 1,61 1.5/8" T 3/4" - 14 46 1/8” 56 - 28 2,20 1,81 1" - 11 58 2,28 1/4” - 19 [mm] 19 32 25 L 3/4" [in] [mm] ES [in] [mm] [in] 24 0,94 14 0,551 9/16” 0,98 32 1,26 19 0,748 3/4” [in] VB10B-06 3/8” - 19 31 1,22 38 1,50 22 0,866 7/8” VB10B-08 1/2” - 14 38 1,50 46 1,81 27 1,063 1.1/16” VB10B-10 5/8” - 14 41 1,61 49 1,93 30 1,181 1.3/16” VB10B-12 3/4” - 14 46 1,81 56 2,20 32 1,260 1.1/4” VB10B-16 1” - 11 58 2,28 69 2,72 41 1,614 1.5/8” B Series Catalogue_Rev00.2007.xls Pagina 21 di 85 The document is exclusive property of INTERTRACO S.p.A.. All rights are reserved. © Intertraco (Italia) S.p.A. All rights are reserved - 49 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES KW13B METRIC JET WASH FEMALE SWIVEL “K” TYPE G Pressnippel DKO fuer Waschgeraete T C FEMMINA DIRITTA PER IDROPULITRICE TIPO “K” HEMBRA GIRATORIA JET WASH ESTILO “K” A KW13B CODE CODICE CODICE BEST.-NR CODIGO KW13B-04-22 JET WASH FEMALE SWIVEL "K" TYPE Ø HOSE Ø TUBO HOSE BORE Ø SCHLAUCH DN INCH SIZE Ø MANGUERA 6 KW13B-05-22 8 KW13B-06-22 10 KW13B-04-22 KW13B-05-22 KW13B-06-22 04 DN1/4" INCH 5/16" 6 8 3/8" 10 05 1/4” 06 T T A [mm] A C [in] [mm] M22X1,5 SIZE 31 1,22 [mm] 14 M22X1,5 31 1,22 31 14 31 1,22 14 04 M22X1,5 M22X1,5 5/16” 05 M22X1,5 3/8” 06 M22X1,5 50 - © Intertraco (Italia) S.p.A. All rights are reserved 31 31 G C [in] [mm] 36 [in]0,55 [mm] 0,55 1,22 0,55 G [in] 1,42[in] [mm] [in] 36 1,42 0,55 36 1,42 0,55 36 1,42 36 14 1,42 36 1,42 1,22 14 1,22 14 0,55 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES FQ13B METRIC METRIC FEMALE SWIVEL (MULTISEAL 24°/60° CONE SEAT) CH T FEMMINA METRICA DIRITTA CONO UNIVERSALE (MULTISEAL 24°/60°) A FQ13B CODE CODICE BEST.-NR CODIGO CODICE DKL Dichtkegel mit Ueberwurfmutter HEMBRA GIRATORIA RECTA METRICA CONO MULTIUSO 24°/60° B METRIC FEMALE SWIVEL (MULTISEAL 24°/60° - DIN 3868) Ø HOSE CONE SEAT Ø TUBO Ø SCHLAUCH MANGUERA HOSEØ BORE T DN DNINCH INCH SIZE SIZE A T B [mm] A [mm] [in] 6 6 1/4" 1/4” 04 04 M14X1,5 M14X1,5 20,5 21,5 0,81 0,85 0,14 3,5 17 3,5 0,14 0,67 17 11/16" 0,669 11/16” FQ13B-05-16 FQ13B-05-16 8 8 5/16" 5/16” 05 05 M16X1,5 M16X1,5 20 21 0,79 0,83 5 0,20 5 19 0,20 0,75 19 3/4" 0,748 3/4” FQ13B-05-18 FQ13B-05-18 8 05 8 5/16" 5/16” M18X1,5 M18X1,5 21 05 0,83 21 5 0,20 5 22 0,83 0,87 0,20 7/8" 22 0,866 7/8” FQ13B-06-16 FQ13B-06-16 10 M16X1,5 0,866 7/8” FQ13B-06-18 10 FQ13B-08-22 12 22 0,866 7/8” FQ13B-10-26 16 FQ13B-10-26 FQ13B-10-27 16 16 5/8" 5/8” 10 FQ13B-04-14 FQ13B-04-14 FQ13B-06-18 FQ13B-08-22 10 10 12 FQ12 3/8" 06 3/8” 06 3/8" 06 M18X1,5 1/2" 5/8" M16X1,5 3/8” 06 M18X1,5 1/2” 08 M22X1,5 08 10 M22X1,5 M26X1,5 B [in] [mm] CH [mm] [in] [mm] [in] CH [in] 20 0,79 21,6 5 0,85 0,20 21 0,83 5 0,20 5 0,20 6 0,24 23,5 24,5 10 M27X1,5 M26X1,526,5 5 [in] 0,20 7/8" 22 0,87 7/8" 1,06 1.1/16" 1,26 1.1/4" 27 1,063 1.1/16” 0,24 1,26 32 1.1/4" 1,260 1.1/4” 24,5 0,96 24,5 1,04 0,96 4 0,16 6 32 5 [in] 0,87 0,83 0,96 5 in 22 21 0,93 [mm] in 27 32 0,20 0,20 22 FQ13 © Intertraco (Italia) S.p.A. All rights are reserved - 51 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES FQ93B METRIC METRIC FEMALE SWIVEL - 90° ELBOW (MULTISEAL 24°/60° CONE SEAT) A CODICE HEMBRA GIRATORIA A 90°METRIC CONO MULTIUSO 24°/60° CH Ø HOSEMETRIC FEMALE SWIVEL Ø TUBO A CONE SEAT Ø SCHLAUCH T - DIN 3868) Ø MANGUERA CODE FQ93B CODICE BEST.-NR CODIGO D T DKL 90° Dichtkegel mit Ueberwurfmutter B FEMMINA METRICA 90° CONO UNIVERSALE (MULTISEAL 24°/60°) DN HOSEINCH BORESIZE T [mm] A[in] FQ93B-04-14 DN 6 INCH 1/4” SIZE 04 M14X1,5 [mm] 28,5 FQ93B-04-14 FQ93B-05-16 68 1/4" 5/16” 0405 M14X1,5 M16X1,5 28,5 31,5 FQ93B-05-16 8 5/16" 05 M16X1,5 FQ93B-06-18 10 3/8" 06 M18X1,5 FQ93B-08-22 12 1/2" 08 M22X1,5 FQ93B-10-27 16 5/8" 10 M27X1,5 FQ93B-06-18 FQ93B-08-22 FQ93B-10-26 FQ93B-10-26 10 12 16 16 3/8” 1/2” 5/8” 5/8" 06 08 1010 - 90° ELBOW (MULTISEAL 24°/60° 31,5 B [mm]B [in] [mm] CH [in] [in] 0,14 [mm] 30 1,12 1,24 43,5 5 1,71 0,20 30 33 5 0,20 33 5 0,20 35,5 1,40 22 5 0,20 44 1,73 27 0,16 52 2,05 32 1,24 1,26 5 M22X1,5 40,5 1,59 5 M26X1,5 M26X1,5 5454 2,13 2,13 66 52 2,05 4 52 - © Intertraco (Italia) S.p.A. All rights are reserved [in] [mm] 3,5 32 40,5 [mm] D CH [in] 1,12 M18X1,5 32 D 1,26 1,59 0,20 0,20 0,24 0,24 35,5 44 [in] 1,18 [mm]17 [in] [in] 0,669inin 11/16” 1,18 11/16" 3/4” 1,30 17 190,66930,748 1,30 19 0,748 3/4" 1,40 1,73 22 0,866 7/8” 1,063 1.1/16” 0,8661 7/8" 1,063 1.1/16" 1,2598 1.1/4" 27 52,5 2,07 2,07 32 321,25981,260 52,5 1.1/4" 1.1/4” B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES FM13B METRIC METRIC FEMALE SWIVEL (60° CONE SEAT) CH T FEMMINA METRICA DIRITTA CONO 60° Dichtkopf-Universal 60° konus Metrisch HEMBRA GIRATORIA RECTA METRICA CONO 60° A FM13B CODE CODICE CODICE BEST.-NR CODIGO B METRIC FEMALE SWIVEL (60° CONE SEAT - DIN 3863) Ø HOSE Ø TUBO HOSEØBORE SCHLAUCH Ø MANGUERA DN INCH SIZE DN 3/4" INCH 12 FM13B-12-30 19 FM13B-12-30 FM13B-16-38 25 19 1" 3/4” 16 FM13B-16-38 25 1” T SIZE M30X1,5 [mm] 25 12 M30X1,526,5 M38X1,5 16 A A T M38X1,5 [in] [mm] 0,98 25 1,04 26,5 B B [mm] [in] 5 [in] [mm] CH CH [in] inin [mm]36 0,20 [in] 1,42 [mm] 1.7/16" [in] 0,98 5 0,20 5 46 0,20 1,81 36 1.13/16" 1,417 1.7/16” 1,04 0,20 46 1,811 1.13/16” 5 [in] © Intertraco (Italia) S.p.A. All rights are reserved - 53 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES FM93B METRIC METRIC FEMALE SWIVEL - 90° ELBOW (60° CONE SEAT) A T FM93B CODE CODICE BEST.-NR CODIGO CODICE D 90° Dichtkopf-Universal 60° koNus Metrisch B FEMMINA METRICA 90° CONO 60° HEMBRA GIRATORIA A 90° METRICA CONO 60° CH Ø HOSE - 90° ELBOW (60° CONE SEAT - DIN Ø TUBOMETRIC FEMALE SWIVEL A B D CH Ø SCHLAUCH T Ø MANGUERA HOSE BORE A B D CH T DN INCH INCH SIZE SIZE [mm] [mm] [in] [mm] [in] [in] [mm] [mm][in] [in] inin [mm] [in] [in] [mm] [in] [mm] DN 3863) [in] FM93B-12-30 FM93B-12-30 19 19 3/4" 3/4” 1212 M30X1,5 M30X1,5 6565 2,56 2,56 55 0,20 0,20 60 60 2,36 1.7/16" 1.7/16” 2,36 36 361,41731,417 FM93B-16-38 FM93B-16-38 25 25 1"1” 1616 M38X1,5 M38X1,5 7272 2,83 2,83 55 0,20 0,20 72 72 2,83 1.13/16"1.13/16” 2,83 46 46 1,8111,811 54 - © Intertraco (Italia) S.p.A. All rights are reserved B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES SM10B METRIC METRIC STANDPIPE A B ERMETO DIRITTO ROHRSTUTZEN BEL/BES GERADE C ESPIGA LISA RECTA METRICA SM10B CODICE CODE CODICE SM10B-04-06 BEST.-NR CODIGO SM10B-04-08 METRIC STANDPIPE HOSE BORE DN INCH 6 1/4" 6 1/4" SM10B-04-10 6 1/4" SM10B-04-12 6 1/4" SM10B-05-12 8 5/16" C Ø HOSE Ø TUBO Ø SCHLAUCH 04 Ø MANGUERA SIZE 04 INCH SIZE 1/4” 04 1/4” 04 3/8" 6 06 1/4” 04 SM10B-04-1210 SM10B-06-12 3/8" 6 06 1/4” SM10B-08-12 SM10B-05-1212 1/2" 8 08 SM10B-08-14 SM10B-06-1012 1/2" 10 08 SM10B-08-15 12 1/2" 08 SM10B-08-16 12 1/2" SM10B-10-18 16 5/8" SM10B-04-06 SM10B-04-08 SM10B-04-1010 SM10B-06-10 SM10B-06-12 SM10B-08-12 DN 6 6 10 12 04 04 05 08 10 A [mm] [in] 6 0,24 8 0,31 [mm] 10 12 12 6 8 B [mm] [in] [mm] 28 1,10 22 0,87 30,5 1,20 0,94 33 1,30 24 [mm] 0,47 33 1,30 0,47 33,5 1,32 0,39 C [in] 0,24 0,31 A [in] [in] [mm] [in] 1,10 22 0,87 1,20 24 0,94 27 1,06 27 1,06 27 1,06 28 30,5 B 10 100,39 0,39 1,20 3324 30,5 1,30 0,94 27 1,06 04 12 120,47 0,47 1,20 3324 30,5 1,30 0,94 27 1,06 5/16” 05 12 120,47 30 0,47 1,18 33,523 0,91 1,32 27 1,06 3/8” 06 14 100,55 37 0,39 1,46 30,529 1,14 24 0,94 15 0,59 33 1,30 26 1,02 0,63 37 1,46 30 1,18 1,20 24 0,94 0,71 34 1,34 27 1,06 1,22 24 0,94 3637 1,42 1,46 29 1,14 3/8” 06 1/2” 08 16 18 12 12 0,47 0,47 31 SM10B-08-1416 SM10B-10-20 5/8" 12 10 1/2” 08 20 140,79 SM10B-08-1519 SM10B-12-18 3/4" 12 12 1/2” 08 18 150,71 0,59 1,36 3227 34,5 1,26 1,06 25 0,98 SM10B-12-20 SM10B-08-1619 3/4" 12 12 1/2” 08 20 160,79 44,5 0,63 1,75 3737 1,46 1,46 30 1,18 SM10B-12-22 19 3/4" 10 22 0,87 36,5 1,44 29 1,14 27 1,06 SM10B-12-25 19 3/4" 0,98 48,5 1,91 41 1,61 SM10B-16-25 25 1" 0,98 50,5 1,99 41 1,61 1,73 37 1,46 SM10B-16-28 25 1" 1,10 39,5 1,56 30 1,18 1,36 27 1,06 1,75 1,73 36 1,42 SM10B-10-18 SM10B-10-20 SM10B-12-18 16 16 19 12 12 16 16 5/8” 5/8” 10 3/4” 12 25 25 28 18 20 18 0,71 0,79 0,71 34 44 34,5 0,79 2,11 44,544 53,5 1,34 SM10B-12-2025 SM10B-16-30 1" 19 16 3/4” 12 SM10B-12-22 19 3/4” 12 22 0,87 36,5 1,44 28 1,10 SM10B-12-25 19 3/4” 12 25 0,98 48,5 1,91 41 1,61 SM10B-16-25 25 1” 16 25 0,98 50,5 1,99 41 1,61 SM10B-16-28 25 1” 16 28 1,10 39,5 1,56 30 1,18 SM10B-16-30 25 1” 16 30 1,18 53,5 2,11 44 1,73 30 201,18 0,55 1,73 44 30,5 1,20 © Intertraco (Italia) S.p.A. All rights are reserved - 55 B Series Catalogue_Rev00.2007.xls Pagina 27 di 85 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES SM40B METRIC METRIC STANDPIPE - 45° ELBOW A C D ERMETO 45° Rohrstutzen BEL/BES 45° ESPIGA LISA 45° METRICA SM40B METRIC STANDPIPE - 45° ELBOW Ø HOSE CODE Ø TUBO HOSE BORE Ø SCHLAUCH CODICE CODICE BEST.-NR DN INCH SIZEØ MANGUERA CODIGO 6 1/4" DN 04 SM40B-04-06 INCH SM40B-04-08 SM40B-04-06 6 1/4" 6 04 SM40B-04-10 6 1/4" SM40B-05-10 8 5/16" SM40B-05-12 8 5/16" SM40B-06-10 10 3/8" SM40B-04-08 SM40B-04-10 SM40B-05-10 6 6 8 04 05 05 06 C [mm] SIZE 6 1/4” 04 8 1/4” 04 1/4” 04 5/16” 05 [in] 0,24 [mm] 60,31 10 10 12 10 8 A C [mm] [in] [mm] [in] 50,5 0,24 1,99 4523 0,91 1,77 22 0,87 0,39 57,5 2,26 24,5 0,96 23 0,91 0,39 57 2,24 24,5 0,96 0,47 56 2,20 29 1,14 2,26 24,5 0,96 0,39 45,5 1,79 22 0,87 2,24 24,5 0,96 2,20 1,14 29 1,14 1,10 1,79 22 0,87 1,34 2,20 29 1,14 2,38 28 1,10 2,09 34 1,34 3,39 39 1,54 3,46 1,79 46 1,81 1,69 3,13 39 1,54 10 0,31 0,39 0,39 3/8" 8 06 5/16” 05 14 120,55 SM40B-08-15 SM40B-06-1012 1/2" 10 08 3/8” 06 15 100,59 SM40B-08-16 SM40B-06-1412 1/2" 10 08 06 16 140,63 SM40B-10-18 16 5/8" 18 0,71 86 3,39 SM40B-10-20 16 5/8" 0,79 86 3,39 SM40B-12-22 19 3/4" 0,87 79,5 3,13 SM40B-08-15 1/2” 08 1/2” 08 5/8” 10 SM40B-10-2025 SM40B-16-28 16 12 1" 16 16 5/8” SM40B-16-30 SM40B-12-2225 1" 19 16 SM40B-12-25 SM40B-08-16 SM40B-10-1819 12 3/8” 12 10 12 20 22 [in] 0,87 [in] SM40B-05-1210 SM40B-06-14 10 [mm] D 1,77 [mm] 22 10 45 [in] A D 15 16 0,47 2,20 56 50,5 57,5 57 5629 60,5 0,39 2,38 45,528 53 0,55 2,09 0,59 0,63 5634 1,99 39 1,54 46 1,81 39 1,54 60,5 53 25 180,98 10 28 201,10 0,71 3,48 8647 0,79 3,74 87,9 95 45,5 3/4” 12 30 221,18 89 0,87 3,50 79,543 19 3/4” 12 25 0,98 88,5 3,48 47 1,85 SM40B-16-28 25 1” 16 28 1,10 95 3,74 45,5 1,79 SM40B-16-30 25 1” 16 30 1,18 89 3,50 43 1,69 SM40B-12-25 3/4" 56 - © Intertraco (Italia) S.p.A. All rights are reserved 88,5 1,85 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES SM90B METRIC METRIC STANDPIPE - 90° ELBOW A D ERMETO 90° Rohrstutzen BEL/BES 90° ESPIGA LISA 90° METRICA C Ø HOSE METRIC STANDPIPE - 90° ELBOW Ø TUBO SM90B CODE CODICE BEST.-NR CODIGO CODICE Ø SCHLAUCH HOSE BORE Ø MANGUERA C C SIZE [mm][mm] [in] INCHDNSIZE INCH SM90B-04-06 6 SM90B-04-06 1/4" 6 04 1/4” 04 6 60,24 SM90B-04-08 SM90B-04-08 6 1/4" 6 04 1/4” 04 8 80,31 SM90B-04-10 6 1/4" 10 SM90B-05-10 8 5/16" SM90B-06-10 10 3/8" SM90B-06-12 10 3/8" DN SM90B-04-10 SM90B-05-10 SM90B-06-10 6 8 10 04 05 06 06 1/4” 04 5/16” 05 3/8” 06 10 10 12 A [in] [mm] A [in] [in] [mm] [in] 2534 0,98 1,34 34 1,34 27,5 0,31 1,08 27,536 1,42 1,08 36 1,42 0,39 27,5 1,08 36 1,42 36 1,42 0,39 36 1,42 39 1,54 0,39 36 1,42 39 1,54 1,42 39 1,54 0,47 33,5 1,32 47 1,85 1,42 39 1,54 10 10 10 [in] 0,24 0,98 25 0,39 0,39 0,39 [mm] [mm] D D 27,5 36 36 1,08 SM90B-06-1212 SM90B-08-15 1/2" 10 08 3/8” 06 15 120,59 0,47 1,71 33,554 43,5 1,32 2,13 47 1,85 SM90B-08-16 SM90B-08-1512 1/2" 12 08 1/2” 08 16 150,63 42,5 53,5 0,59 1,67 43,5 2,11 1,71 54 2,13 SM90B-10-18 SM90B-08-1616 5/8" 12 10 1/2” 08 18 160,71 58,5 0,63 2,30 42,563 2,48 1,67 53,5 2,11 SM90B-10-20 16 5/8" 20 0,79 59,5 2,34 68 2,68 SM90B-12-20 19 3/4" 0,79 53,5 2,11 78 3,07 2,30 63 2,48 SM90B-12-22 19 3/4" 0,87 53 2,09 70,5 2,78 2,34 68 2,68 2,11 78 3,07 2,09 3,50 70,5 2,78 3,09 2,70 82 3,23 SM90B-10-18 5/8” 10 5/8” 10 3/4” 12 SM90B-12-2225 SM90B-16-25 19 12 1" 19 16 3/4” SM90B-16-28 SM90B-12-2525 1" 19 16 SM90B-16-25 SM90B-16-28 SM90B-10-20 SM90B-12-2019 SM90B-12-25 16 10 16 12 12 20 22 18 20 0,71 0,79 58,5 59,5 25 200,98 12 25 220,98 0,79 2,09 53,582 0,87 2,70 5389 68,5 3/4” 12 28 251,10 67,5 78,5 0,98 2,66 68,5 25 1” 16 25 0,98 68,5 2,70 89 3,50 25 1” 16 28 1,10 67,5 2,66 78,5 3,09 3/4" 53 3,23 © Intertraco (Italia) S.p.A. All rights are reserved - 57 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES BM10B METRIC METRIC BANJO A E BANJO METRICO Ringnippel metrisch ORIENTABLE BANJO METRICO C BM10B CODE CODICE CODICE BEST.-NR CODIGO METRIC BANJO Ø HOSE Ø TUBO HOSE ØBORE SCHLAUCH DN INCH SIZE Ø MANGUERA BM10B-04-10 6 BM10B-04-12 BM10B-04-10 6 BM10B-04-14 6 BM10B-04-16 6 BM10B-05-12 8 BM10B-05-14 8 BM10B-05-12 BM10B-05-16 8 BM10B-04-12 BM10B-04-14 DN1/4" 04 INCH 04 6 1/4" 1/4” 6 1/4" 04 1/4” 04 M10X1 SIZE M12X1,5 04 M14X1,5 04 M16X1,5 T A [mm] A C [in] [mm] E [in] [mm] C E [in] 0,87 [mm] 10 0,39 [in] 10 [mm] 0,39 0,8322 12 0,47 0,87 12 10,2 0,47 0,40 21 0,83 14 23 0,91 16 21 0,83 12 22,5 0,89 14 22 M10X1 21 M12X1,5 21 14 0,55 0,63 18 0,71 0,47 12 0,47 0,55 14 0,55 0,39 0,48 12 0,47 0,56 14 0,55 0,63 18 0,71 1/4” 04 M16X1,5 85/16" 5/16” 05 05 M16X1,5 M12X1,523 0,9121 16 0,83 0,63 12,2 0,71 0,47 18 12 0,47 BM10B-06-14 BM10B-05-14 10 06 8 3/8" 5/16” M14X1,5 05 M14X1,524 0,94 23,2 14 0,55 0,91 14 14,2 0,55 0,56 14 0,55 BM10B-06-16 BM10B-05-16 10 06 8 3/8" 5/16” M16X1,5 05 M16X1,524 0,9423 16 0,63 0,91 18 16,2 0,71 0,64 18 0,71 27,5 1,08 18 0,71 20 0,79 26,5 1,04 22 0,87 22 0,87 0,56 14 0,55 24,5 0,96 16 0,63 18 0,71 0,64 18 0,71 18,2 0,79 0,72 22,2 0,87 0,87 22 20 0,79 22 0,87 0,63 18 0,71 22 18,2 0,87 0,72 1,14 20 0,79 0,87 22 0,87 0,94 25 0,98 BM10B-06-18 10 BM10B-06-22 10 BM10B-08-16 12 BM10B-06-14 BM10B-06-16 6 5/16" 3/8" 05 06 M12X1,5 M14X1,5 M18X1,5 10 3/8” 06 M14X1,5 10 3/8” 06 M16X1,5 3/8" 1/2" 06 08 M22X1,5 M16X1,5 BM10B-06-18 12 101/2" 3/8” 08 BM10B-06-22 12 101/2" 3/8” 08 BM10B-08-22 06 M18X1,5 M18X1,5 28,1 06 M22X1,5 M22X1,527 08 BM10B-08-24 BM10B-08-16 12 121/2" 1/2” M24X1,5 08 M16X1,5 10 BM10B-10-22 BM10B-08-18 16 125/8" 1/2” 19 3/4" 12 BM10B-12-26 M22X1,5 08 M18X1,528 BM10B-08-18 BM10B-08-22 BM10B-16-30 BM10B-08-24 25 12 12 1" M26X1,5 24 0,94 0,96 1,10 28,1 22 0,87 1,11 1,75 30 08 M24X1,5 0,94 24,5 24 44,5 1/2” 0,94 1,04 0,87 26 M22X1,5 0,91 27,5 18 26,5 22 1,06 1,11 1,44 08 M30X1,5 24 36,5 1/2” 16 23 27 31 1,08 0,71 14,2 [in] 10 M14X1,5 05 0,83 12,2 [mm] 04 5/16" 21 0,55 0,83 [in] 1/4” BM10B-04-16 6 1/4" T 16,2 14,2 16,2 20 16,2 1,02 29 1,18 37 1,06 1,22 22,2 24,2 1,46 BM10B-10-22 16 5/8” 10 M22X1,5 28 1,10 22,2 0,87 22 0,87 BM10B-12-26 19 3/4” 12 M26X1,5 36,5 1,44 26,2 1,03 29 1,14 BM10B-16-30 25 1” 16 M30X1,5 44,5 1,75 30,2 1,19 37 1,46 58 - © Intertraco (Italia) S.p.A. All rights are reserved B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES METRIC VM10B METRIC BANJO BOLT L VITE FORATA METRICA Hohlschraube metrisch TORNILLO METRICO PARA ORIENTABLE BANJO B T ES VM10B METRIC BANJO BOLT CODICE B T L ES [mm] [in] [mm] [in] [mm] [in] inin M8X1 16 0,63 21 0,83 12 0,47 1/2" M10X1 T 19 0,75 24 0,94 14 0,55 M12X1,5 23 0,91 28 1,10 17 0,67 11/16" M14X1,5 25 0,98 32 1,26 19 0,75 3/4" VM10B-16 M16X1,5 31 1,22 37 1,46 22 0,87 7/8" VM10B-08 VM10B-18 M8X1 M18X1,5 36 161,42 440,63 1,73 24 21 0,94 VM10B-22 M22X1,5 38 1,50 1,81 27 1,06 M24X1,5 41 19 46 1,61 1,93 560,91 2,20 30 1,18 1.3/16" 46 231,81 49 58 2,28 69 2,72 38 1,50 VM10B-08 CODE VM10B-10 CODICE BEST.-NR VM10B-12 CODIGO VM10B-14 VM10B-10 VM10B-24 VM10B-12 VM10B-26 VM10B-30 M10X1 M12X1,5 M26X1,5 M30X1,5 [mm] 25 B [in] 0,75 0,98 [mm] 24 32 28 1,26 32 L ES 9/16" [in] [mm] [in] 0,83 15/16" 12 0,472 1/2” 1.1/16" 0,94 14 0,551 9/16” 1,10 1.1/4" 17 0,669 11/16” 1.1/2" 1,26 19 0,748 3/4” [in] VM10B-14 M14X1,5 VM10B-16 M16X1,5 31 1,22 37 1,46 22 0,866 7/8” VM10B-18 M18X1,5 36 1,42 44 1,73 24 0,945 15/16” VM10B-22 M22X1,5 38 1,50 46 1,81 27 1,063 1.1/16” VM10B-24 M24X1,5 41 1,61 49 1,93 30 1,181 1.3/16” VM10B-26 M26X1,5 46 1,81 56 2,20 32 1,260 1.1/4” VM10B-30 M30X1,5 58 2,28 69 2,72 38 1,496 1.1/2” B Series Catalogue_Rev00.2007.xls Pagina 31 di 85 The document is exclusive property of INTERTRACO S.p.A.. All rights are reserved. © Intertraco (Italia) S.p.A. All rights are reserved - 59 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES ML10B METRIC ES METRIC LIGHT MALE (24° CONE SEAT) B MASCHIO METRICO SV. 24° SERIE LEGGERA T CEL Gewindezapfen leichte Reihe 24° Konus MACHO FIJO METRIC CONO 24° SERIE LIGERA A ML10B CODICE METRIC LIGHT MALE (24° CONE SEAT) HOSE BORE DN INCH SIZE 6 1/4" 04 T PIPE A B [in] [mm] [in] [mm] [in] inin L6 22,5 0,89 10 0,39 14 0,55 L8 22,5 T 0,89 10 PIPE 0,39 14 A 0,55 9/16" 17 0,67 [mm] 6 Ø HOSE M12X1,5 Ø TUBO 1/4" Ø SCHLAUCH 04 M14X1,5 1/4" Ø MANGUERA 04 M16X1,5 8 5/16" 05 8 5/16" 05 3/8" 06 ML10B-06-18 ML10B-04-1410 3/8" 6 ML10B-06-22 10 3/8" ML10B-08-18 12 1/2" 08 ML10B-08-22 ML10B-05-1612 1/2" 8 085/16” M22X1,5 05 L15M16X1,5 26,5 1,04 ML10B-08-26 12 1/2" 08 M26X1,5 L18 29 1,14 ML10B-10-26 16 5/8" 10 M26X1,5 L18 29 1,14 3/4" 10 ML10B-04-12 CODE CODICE ML10B-04-14 BEST.-NR ML10B-04-16 CODIGO ML10B-05-16 ML10B-05-18 6 ML10B-04-1210 ML10B-06-16 ML10B-04-16 ML10B-05-18 ML10B-06-1619 ML10B-12-30 DN 6 6 8 L10 24,5 0,96 11 0,43 M16X1,5 L10 24,5 0,96 11 0,43 17 0,67 M18X1,5 L12 25 0,98 11 0,43 19 0,75 INCH SIZE 1/4”M16X1,5 04 M12X1,5 24,5 0,96 L6 11 06 1/4”M18X1,5 04 L12M14X1,5 25 0,98 11 L8 06 M22X1,5 L15 26 1,02 M18X1,5 L12 23,5 0,93 1/4” 04 5/16” 05 L10 M16X1,5 M18X1,5 12 3/8” M30X206 L22M16X1,5 31,5 1,24 ML10B-16-36 25 1" 16 M36X2 L28 33,5 1,32 ML10B-20-45 31 1.1/4" 20 M45X2 L35 41 1,61 ML10B-06-2238 ML10B-24-52 10 1.1/2" 24 3/8” M52X206 ML10B-06-18 10 ES [mm] 3/8” 06 M18X1,5 L42M22X1,5 41 1,61 0,43 22,5 17 [in]11/16" [mm] 0,75 0,89 3/4" 0,87 7/8" 11 0,43 19 0,75 3/4" 0,96 0,4724,5 22 0,87 0,96 7/8" 12 0,47 27 1,06 1.1/16" 12 0,47 27 1,06 1.1/16" 14 L10 25 [in] 0,39 14 0,551 9/16” 10 0,39 14 0,551 9/16” 11 0,43 17 0,669 11/16” 11 0,43 17 0,669 11/16” 11 0,43 19 0,748 3/4” 0,8911/16" 10 22 L12 [mm] 0,67 0,47 12 L10 [in] 3/4" 0,4322,5 19 24,5 ES 11/16" 12 L10 B 9/16" 0,98 [in] 0,5524,5 30 1,18 0,961.3/16" 11 0,43 17 0,669 11/16” 14 0,55 36 1,42 1.7/16" 16 0,63 46 1,81 1.13/16" 11 0,43 19 0,748 3/4” L15 16 0,63 12 0,47 22 0,866 7/8” L12 25 2655 0,98 1,022.3/16" 2,17 ML10B-08-18 12 1/2” 08 M18X1,5 L12 23,5 0,93 11 0,43 19 0,748 3/4” ML10B-08-22 12 1/2” 08 M22X1,5 L15 26,5 1,04 12 0,47 22 0,866 7/8” ML10B-08-26 12 1/2” 08 M26X1,5 L18 29 1,14 12 0,47 27 1,063 1.1/16” ML10B-10-26 16 5/8” 10 M26X1,5 L18 29 1,14 12 0,47 27 1,063 1.1/16” ML10B-12-30 19 3/4” 12 M30X2 L22 31,5 1,24 14 0,55 30 1,181 1.3/16” ML10B-16-36 25 1” 16 M36X2 L28 32 1,26 14 0,55 36 1,417 1.7/16” ML10B-20-45 31 1.1/4” 20 M45X2 L35 41 1,61 16 0,63 46 1,811 1.13/16” ML10B-24-52 38 1.1/2” 24 M52X2 L42 44 1,73 16 0,63 55 2,165 2.3/16” B Series Catalogue_Rev00.2007.xls Pagina 32 di 85 The document is exclusive property of INTERTRACO S.p.A.. All rights are reserved. 60 - © Intertraco (Italia) S.p.A. All rights are reserved B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES FL13B METRIC METRIC LIGHT FEMALE SWIVEL (24° CONE SEAT) CH T FEMMINA METRICA DIRITTA O-RING CONO 24° SERIE LEGGERA DKOL Dichtkegel mit O-Ring leichte Reihe 24° KONUS A FL13B CODICE HEMBRA GIRATORIA RECTA METRICA CONO 24° SERIE LIGERA B METRIC LIGHT FEMALE SWIVEL (24° CONE SEAT) HOSE BORE DN INCH SIZE FL13B-04-12 CODE CODICE FL13B-04-16 BEST.-NR FL13B-04-18 CODIGO 6 1/4" 04 FL13B-04-14 6 1/4" 04 FL13B-05-16 8 5/16" 05 FL13B-05-18 FL13B-04-128 5/16" 6 FL13B-06-16 T PIPE Ø HOSE M12X1,5 Ø TUBO 1/4" 04 M14X1,5 Ø SCHLAUCH 1/4" 04 M16X1,5 Ø MANGUERA L6 A B CH [mm] [in] [mm] [in] [mm] [in] 20,9 0,82 2,6 0,10 16 0,63 1,5 0,06 17 A 0,67 0,06 19 0,75 3/4" 22 0,87 7/8" 0,75 3/4" L8 25 T 0,98 L10 26,5 1,04 PIPE 1,5 L12 26 1,02 1,5 0,06 L10 26,5 1,04 1,5 0,06 05 1/4”M18X1,5 04 L12M12X1,5 26 1,02 1,5 L6 0,06 2122 3/8" 06 L10 1,5 0,06 22 3/8" 06 FL13B-06-22 FL13B-04-1610 3/8" 6 06 1/4”M22X1,5 04 L15M16X1,5 27,5 1,08 FL13B-08-22 12 1/2" 08 M22X1,5 L15 28,5 1,12 FL13B-08-26 12 1/2" 08 M26X1,5 L18 29 1,14 FL13B-10-26 FL13B-05-1616 5/8" 8 FL13B-10-27 16 5/8" FL13B-12-30 19 3/4" FL13B-20-45 31 FL13B-06-18 1.1/4" FL13B-24-52 38 FL13B-06-22 1.1/2" 10 24 6 6 10 FL13B-04-1410 FL13B-06-18 FL13B-04-18 FL13B-05-18 FL12B-06-1625 FL13B-16-36 DN 6 6 8 10 1" 10 M18X1,5 INCHM16X1,5 SIZE M16X1,5 1/4”M18X1,5 04 1/4” 04 27,5 1,08 M14X1,5 26 1,02 L12 L8 1,5 2,5 L10 2522 [in] [in] [mm] [in] 2,6 0,10 16 0,630 0,98 7/8" 1,5 0,06 17 0,669 11/16” 1,5 0,06 19 0,748 3/4” 1,5 0,06 22 0,866 7/8” 1,5 0,06 19 0,748 3/4” 1,5 0,06 22 0,866 7/8” 0,87 7/8" 0,87 1,06 1,081.1/16" 0,10 27 1,06 1.1/16" 2 0,08 32 1,26 1.1/4" 105/16” M26X1,5 05 L18M16X1,5 29 1,14 2 L10 10 M27X1,5 L18 29 1,14 12 M30X2 L22 29,5 1,16 26 1,02 0,08 26,5 32 1,26 1,041.1/4" 2 0,08 32 1,26 1.1/4" 36 1,42 1.7/16" L12 3,5 0,14 16 3/8” M36X206 L28M16X1,5 33,5 1,32 L10 3,5 0,14 2341 0,911.5/8" 1,61 3,5 0,14 19 0,748 3/4” 20 M45X2 L35 39,5 1,56 2 0,08 50 1,97 2" M52X2 L42 39,5 1,56 3 0,12 60 2,36 2.3/8" 1,5 0,06 22 0,866 7/8” 1,12 2,5 0,01 27 1,063 1.1/16” 3/8” 06 06 M18X1,5 L12 M22X1,5 L15 26 28,5 1,02 [in] M18X1,5 3/8” 26 CH [mm] 0,87 0,83 7/8" 0,10 27,5 27 L12 05 0,06 B 11/16" 2,5 M18X1,5 5/16” [mm] 19 inin 1,02 FL13B-08-22 12 1/2” 08 M22X1,5 L15 28,5 1,12 2,5 0,01 27 1,063 1.1/16” FL13B-08-26 12 1/2” 08 M26X1,5 L18 30 1,18 2 0,08 32 1,260 1.1/4” FL13B-10-26 16 5/8” 10 M26X1,5 L18 29 1,14 2 0,08 32 1,260 1.1/4” FL13B-10-27 16 5/8” 10 M27X1,5 L18 29 1,14 2 0,08 32 1,260 1.1/4” FL13B-12-30 19 3/4” 12 M30X2 L22 29,5 1,16 3,5 0,14 36 1,417 1.7/16” FL13B-16-36 25 1” 16 M36X2 L28 30,5 1,20 3,5 0,14 41 1,614 1.5/8” FL13B-20-45 31 1.1/4” 20 M45X2 L35 39,5 1,56 2 0,08 50 1,969 2” FL13B-24-52 38 1.1/2” 24 M52X2 L42 39,5 1,56 3 0,12 60 2,362 2.3/8” B Series Catalogue_Rev00.2007.xls Pagina 33 di 85 The document is exclusive property of INTERTRACO S.p.A.. All rights are reserved. © Intertraco (Italia) S.p.A. All rights are reserved - 61 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES FL43B METRIC METRIC LIGHT FEMALE SWIVEL - 45° ELBOW (24° CONE SEAT) A CH D FEMMINA METRICA 45° O-RING CONO 24° SERIE LEGGERA DKOL 45° - 24° KONUS T HEMBRA GIRATORIA A 45° METRICA CONO 24° SERIE LIGERA B FL43B CODE CODICE CODICE BEST.-NR CODIGO METRIC LIGHT FEMALE SWIVEL - 45° ELBOW (24° CONE SEAT) Ø HOSE Ø TUBO Ø SCHLAUCH HOSE BORE Ø MANGUERA DN INCH FL43B-04-12 DN6 INCH 1/4" FL43B-04-12 FL43B-04-14 66 FL43B-04-16 FL43B-04-14 SIZE TT PIPE PIPE A [mm] A B [in] [mm] D D [in] [mm] [in] [mm] [in] CH M12X1,5 L6 1/4” 1/4" 04 04 M12X1,5 M14X1,5 L6 L8 38,5 1,56 1,52 1,52,6 0,06 0,10 20 18 0,790,71 17 160,6693 0,630 39,7 11/16" 66 1/4" 1/4” 04 04 M16X1,5 M14X1,5 L10 L8 FL43B-04-18 FL43B-04-16 66 1/4" 1/4” 04 04 M18X1,5 M16X1,5 L12 L10 FL43B-05-16 8 5/16" 05 M16X1,5 L10 41,5 1,63 1,5 0,06 19 M16X1,5 L10 50,5 1,99 1,5 0,06 19 M18X1,5 L12 46,5 1,83 1,5 0,06 19 L15 47,3 FL43B-05-16 8 FL42B-06-16 FL43B-06-22 [in] 46 39,7 1,81 1,56 1,51,5 0,06 0,06 20 20 0,790,79 19 170,7480,6693/4" 11/16” 46 0,75 22 0,75 22 0,8661 7/8" 0,8661 7/8" 3/8” 3/8" 06 06 M16X1,5 M22X1,5 FL43B-06-18 FL43B-08-22 1012 3/8” 1/2" 06 08 M18X1,5 M22X1,5 L12 L15 54,8 1,86 2,16 2,53,5 0,10 0,14 22,720,50,890,81 27 191,0630,748 3/4” 1.1/16" 48,7 2,07 1,92 2,51,5 0,10 0,06 2321,20,910,83 27 221,0630,866 52,5 1.1/16" 7/8” FL43B-10-26 FL43B-06-22 1016 5/8" 3/8” 10 06 M26X1,5 M22X1,5 L18 L15 69,5 56,9 2,74 2,24 FL43B-12-30 FL43B-08-22 1219 3/4" 1/2” 12 08 M30X2 M22X1,5 L22 L15 FL43B-16-36 25 1" 16 90 3,54 3,5 4,57 2 16 M52X2 M36X2 L42 127,1 5,00 4 1.1/4” 20 M45X2 L35 116 4,57 2 1.1/2” 24 M52X2 L42 127,1 5,00 3 FL43B-12-30 19 3/4” 12 M30X2 FL43B-16-36 25 1” FL43B-20-45 31 FL43B-24-52 38 1.1/2" 20 24 L18 L22 L28 19 0,75 19 7/8” 0,748 3/4” 78 1.7/16"1.1/16” 52,5 3,07 2,07 3,52,5 0,14 0,10 32 23 1,260,91 36 271,4173 1,063 116 M26X1,5 1.1/4" 0,06 0,866 2 2,5 0,08 1.1/4" 1.1/16” 0,10 27,222,71,070,89 32 271,2598 1,063 L28 10 38 1,5 L35 5/8” FL43B-24-52 1,63 M36X2 16 31 L10 41,5 M45X2 FL43B-10-26 FL43B-20-45 L10 22 3/4” 1010 06 0,79 3/4" M16X1,5 3/8" 20 0,748 05 10 0,06 19 5/16” FL43B-06-18 06 1,5 0,75 M18X1,5 3/8" 1,81 0,79 22 190,8661 0,7487/8" 20 04 10 46 1,81 1,51,5 0,06 0,06 1/4” FL43B-06-16 L12 [mm]0,71[in] 16[mm] [in] 18 0,6299 inin [mm] 38,5 6 [mm]0,10[in] 2,6 CH SIZE 04 FL43B-04-18 [in] 1,52 B 69,5 78 90 62 - © Intertraco (Italia) S.p.A. All rights are reserved 2,74 3,07 3,54 2 3,5 3,5 0,14 35,5 1,40 41 0,08 44,6 1,76 50 0,16 47,3 1,86 60 0,08 0,14 0,14 27,2 1,07 32 1,26 1,6142 1.5/8" 1,9685 2" 2,3622 2.3/8" 32 1,260 1.1/4” 36 1,417 1.7/16” 41 1,614 1.5/8” 35,5 1,40 0,08 44,6 1,76 50 1,969 2” 0,12 47,3 1,86 60 2,362 2.3/8” B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES FL93B METRIC METRIC LIGHT FEMALE SWIVEL - 90° ELBOW (24° CONE SEAT) A T FL93B CODE CODICE CODICE BEST.-NR FL93B-04-12 CODIGO FL93B-04-14 D CH HOSE HOSEØ BORE Ø TUBO DN INCH SIZE Ø SCHLAUCH 6 Ø MANGUERA 1/4" 04 DN 1/4" 04 6 6 8 1/4" 1/4” 5/16" 04 FL93B-05-18 FL93B-04-14 FL93B-06-16 FL93B-06-18 FL93B-04-12 FL93B-05-16 HEMBRA GIRATORIA A 45° METRICA CONO 24° SERIE LIGERA METRIC LIGHT FEMALE SWIVEL - 90° ELBOW (24° CONE SEAT) 6 FL93B-04-16 DKOL 90° - 24° KONUS B FEMMINA METRICA 90° O-RING CONO 24° SERIE LEGGERA INCH T PIPE M12X1,5 T [mm] [in] A [mm] PIPE 2,6 0,10 37 1,46 16 0,6299 1,5 0,06 37,6 1,48 17 0,6693 11/16" M16X1,5 L10 33 1,30 1,5 19 0,748 3/4" 5/16" 1/4” 05 L12 04 M18X1,5 M14X1,5 32,5 L8 3/8" 06 10 3/8" 06 12 1/2" FL93B-10-26 FL93B-05-18 16 8 5/8" 5/16” 10 L18 05 M26X1,5 M18X1,5 FL93B-10-27 16 5/8" 10 FL93B-12-30 19 3/4" 12 06 25 1" 16 FL92B-06-16 FL93B-06-18 FL93B-16-36 FL93B-20-45 FL93B-08-22 8 10 10 M16X1,5 L10 M18X1,5 L12 31 12 1.1/4" 1/2” 20 FL93B-10-26 38 1.1/2" FL93B-10-27 16 5/8” FL93B-12-30 19 FL93B-16-36 1,28 29,5 1,51,160,06 32 1,26 1,5 0,06 1,54 2,5 33 33 50 L12 1,97 36 M16X1,5 M18X1,5 L28 L12 78 1,30 7/8"17 0,669 11/16” 22 0,8661 7/8" 7/8" 19 0,748 3/4” 1,421.1/16" 19 0,748 3/4” 32 37 1,2598 1,46 1.1/4"22 0,866 7/8” 32 1,2598 36 1,4173 1.7/16" 1,420,08 1,549 1,93 0,06 1,46 57,5 2,26 2 71,2 2,80 3,5 0,08 3,07 3,5 0,14 56 3,5 67,5 1,570,14 1,575 102,6 L15 4,04 39 2 10 M26X1,5 116,3 4,58 3 10 M27X1,5 L18 3/4” 12 M30X2 25 1” 16 FL93B-20-45 31 1.1/4” FL93B-24-52 38 1.1/2” 1,54 2,20 36 1,48 39,5 19 0,748 3/4” 0,06 2,95 42,9 1,69 22 41 1,6142 1.5/8" 0,866 7/8” 50 45 1,9685 1,77 2" 27 1,063 1.1/16” 60 32 1,260 1.1/4” 2,66 2,22 103,5 2 0,08 56,5 2,22 2 0,08 56 2,20 32 1,260 1.1/4” L22 67,5 2,66 3,5 0,14 69 2,72 36 1,417 1.7/16” M36X2 L28 78 3,07 3,5 0,14 75 2,95 41 1,614 1.5/8” 20 M45X2 L35 102,6 4,04 2 0,08 89,5 3,52 50 1,969 2” 24 M52X2 L42 116,3 4,58 3 0,12 103,5 4,07 60 2,362 2.3/8” L18 56,5 B Series Catalogue_Rev00.2007.xls 4,07 1,56 1.1/4" 0,14 89,5 0,10 3,52 1,540,08 2,5 0,12 [in] 22 0,8661 37,6 1,48 2 39 [in] 0,630 1,063 L22 1,5 [mm] 16 3/4" 27 L42 5/8” 1,46 1,46 0,748 0,06 1,77 M52X2 16 1,46 0,06 37 37 19 [in] 1,300,10 1,545 M45X2 L35 M22X1,5 24 1,537 [mm] 0,8661 08 FL93B-24-52 1,48 22 L18 40 [in] 37,5 M30X2 37 37,5 0,06 M26X1,5 L10 [mm] 1,080,06 2,6 0,10 1,5 35,5 1,40 0,06 L10 39 M36X2 0,06 1,5 5/16” 08 05 M22X1,5 M16X1,5 L15 06 27,5 1,24 [in] 2,56 L10 3/8” [mm] 65 M16X1,5 3/8” CH inin 1,16 86 FL93B-05-16 FL93B-08-22 [mm] 1,08 10 04 [in] 29,5 05 1/4” [in] CH D[in] 27,5 L6 31,5 6 D [mm]B L8 04 M16X1,5 M12X1,5 L10 FL93B-04-16 B M14X1,5 SIZE L6 A 56 2,3622 2,20 2.3/8" Pagina 35 di 85 The document is exclusive property of INTERTRACO S.p.A.. All rights are reserved. © Intertraco (Italia) S.p.A. All rights are reserved - 63 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES MS10B METRIC ES METRIC HEAVY MALE (24° CONE SEAT) B MASCHIO METRICO SV. 24° SERIE PESANTE T CES Gewindezapfen schwere Reihe 24° Konus MACHO FIJO METRICO CONO 24° SERIE PESADA A MS10B CODICE MS10B-04-14 CODE CODICE MS10B-04-16 BEST.-NR MS10B-04-18 CODIGO MS10B-04-20 MS10B-05-18 METRIC HEAVY MALE (24° CONE SEAT) HOSE BORE DN INCH SIZE 6 1/4" 04 T PIPE A B ES [mm] [in] [mm] [in] [mm] [in] inin S6 24,5 0,96 12 0,47 14 0,55 S8 26 T 1,02 12 PIPE 0,47 17 A 0,67 9/16" 19 0,75 [mm] 6 Ø HOSE M14X1,5 Ø TUBO 1/4" Ø SCHLAUCH 04 M16X1,5 1/4" Ø MANGUERA 04 M18X1,5 S10 26 1,02 12 0,47 6 1/4" DN 04 M20X1,5 S12 26 1,02 12 0,47 22 0,87 7/8" 8 5/16" 05 M18X1,5 S10 26 1,02 12 0,47 19 0,75 3/4" 5/16" 05 0,87 7/8" 6 MS10B-04-148 MS10B-05-20 6 INCH SIZE 1/4”M20X1,5 04 14 S8 0,55 2622 12 0,47 19 0,75 3/4" 22 0,87 7/8" MS10B-05-22 MS10B-04-168 5/16" 6 05 1/4”M22X1,5 04 S14M16X1,5 28 1,10 MS10B-06-18 10 3/8" 06 M18X1,5 S10 26 1,02 MS10B-06-20 10 3/8" 06 M20X1,5 S12 25,5 1,00 MS10B-06-22 MS10B-04-2010 3/8" 6 MS10B-06-24 10 3/8" MS10B-08-24 12 MS10B-04-18 12 0,47 06 1/4”M22X1,5 04 S14M20X1,5 28,5 1,12 14 S12 0,55 2622 06 M24X1,5 S16 28 1,10 14 0,55 24 0,94 15/16" 1/2" 08 M24X1,5 S16 28,5 1,12 14 0,55 24 0,94 15/16" MS10B-05-2016 MS10B-10-30 5/8" 8 MS10B-12-30 19 3/4" MS10B-12-36 19 3/4" MS10B-06-1825 MS10B-16-36 10 1" MS10B-16-42 25 1" MS10B-20-52 31 1.1/4" 20 MS10B-05-22 MS10B-06-20 MS10B-06-2238 MS10B-24-52 8 10 10 1.1/2" 04 5/16” [mm] [in] 12 0,47 14 0,551 9/16” 12 0,47 17 0,669 11/16” 1,02 12 0,47 19 0,748 3/4” 12 0,47 22 0,866 7/8” 12 0,47 19 0,748 3/4” 0,87 1,02 7/8" 1,02 [in] S10 105/16”M30X205 S20M20X1,5 34 1,34 16 S12 0,63 2630 1,18 1,021.3/16" 12 0,47 22 0,866 7/8” 12 M30X2 S20 33,5 1,32 16 0,63 30 1.3/16" 12 M36X2 S25 36,5 1,44 28 1,18 36 1,42 1.7/16" 14 0,55 22 0,866 7/8” M22X1,5 S14 18 0,71 16 3/8” M36X206 S25M18X1,5 37,5 1,48 S10 18 0,71 2636 1,021.7/16" 1,42 12 0,47 19 0,748 3/4” 16 M42X2 S30 40,5 1,59 20 0,79 46 1.13/16" M52X2 S38 48 1,89 22 0,87 26 1,81 55 2.3/16" 12 0,47 22 0,866 7/8” 2855 2,17 1,102.3/16" 2,17 14 0,55 22 0,866 7/8” 3/8” 05 26 [in] M18X1,5 5/16” 05 26 [mm] 0,87 1,02 7/8" S10 8 1/4” 0,96 M18X1,5 MS10B-05-18 6 24,522 [in] S6 12 0,47 ES 3/4" M14X1,5 26 1,02 S12 B 11/16" 06 24 3/8” M52X206 M20X1,5 S12 S38M22X1,5 47 1,85 S14 22 0,87 1,10 1,02 MS10B-06-24 10 3/8” 06 M24X1,5 S16 28 1,10 14 0,55 24 0,945 15/16” MS10B-08-24 12 1/2” 08 M24X1,5 S16 28,5 1,12 14 0,55 24 0,945 15/16” MS10B-10-30 16 5/8” 10 M30X2 S20 33 1,30 16 0,63 30 1,181 1.3/16” MS10B-12-30 19 3/4” 12 M30X2 S20 33,5 1,32 16 0,63 30 1,181 1.3/16” MS10B-12-36 19 3/4” 12 M36X2 S25 36,5 1,44 18 0,71 36 1,417 1.7/16” MS10B-16-36 25 1” 16 M36X2 S25 37,5 1,48 18 0,71 36 1,417 1.7/16” MS10B-16-42 25 1” 16 M42X2 S30 40,5 1,59 20 0,79 46 1,811 1.13/16” MS10B-20-52 31 1.1/4” 20B SeriesM52X2 S38 Catalogue_Rev00.2007.xls 50 1,97 22Pagina 36 0,87 di 85 55 2,165 2.3/16” MS10B-24-52 38 1.1/2” 24 50 1,97 22 55 2,165 2.3/16” M52X2 S38 The document is exclusive property of INTERTRACO S.p.A.. All rights are reserved. 64 - © Intertraco (Italia) S.p.A. All rights are reserved 0,87 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES © Intertraco (Italia) S.p.A. All rights are reserved - 65 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES FS13B METRIC METRIC HEAVY FEMALE SWIVEL (24° CONE SEAT) CH T FEMMINA METRICA DIRITTA O-RING CONO 24° SERIE PESANTE DKOS Dichtkegel mit O-Ring schwere Reihe 24° konus A FS13B CODICE HEMBRA GIRATORIA RECTA METRICA CONO 24° SERIE PESADA B METRIC HEAVY FEMALE SWIVEL (24° CONE SEAT) HOSE BORE T PIPE A B CH DN INCH SIZE FS13B-04-14 CODE CODICE FS13B-04-18 BEST.-NR FS13B-05-20 CODIGO 6 1/4" 04 FS13B-04-16 6 8 5/16" 05 S12 27 1,06 FS12B-06-18 10 3/8" 06 S10 22 0,87 FS13B-06-20 FS13B-04-1410 3/8" 6 06 1/4”M20X1,5 04 S12M14X1,5 28,5 1,12 2 S6 0,08 2224 FS13B-06-22 3/8" 06 S14 4 0,16 27 3/8" 06 FS13B-08-24 FS13B-04-1812 1/2" 6 FS13B-10-30 16 5/8" FS13B-12-30 19 6 10 FS13B-04-1610 FS13B-06-24 FS13B-05-20 FS13B-12-36 FS12B-06-1819 Ø HOSE M14X1,5 Ø TUBO 1/4" 04 M16X1,5 Ø SCHLAUCH 1/4" 04 M18X1,5 Ø MANGUERA DN 6 M20X1,5 INCHM18X1,5 SIZE M22X1,5 [in] [mm] [in] [mm] [in] inin S6 22 0,87 2,5 0,10 17 0,67 11/16" S8 26,5 1,04 S10 28 1,10 T 28,5 1,12 19 A 0,75 3/4" 22 0,87 7/8" 2 0,08 24 0,94 15/16" 2 0,08 0,87 7/8" [mm] 22 [in] [mm] [in] 2,5 0,10 17 0,669 11/16” 1,041.3/16" 2,5 0,10 19 0,748 3/4” 2 0,08 22 0,866 7/8“ 2 0,08 24 0,945 15/16” 2 0,08 22 0,866 7/8” 2 0,08 24 0,945 15/16” 1,06 1.1/16" S16M18X1,5 32 1,26 3 S10 0,12 2930 M30X2 S20 36 1,42 3,5 0,14 36 1,42 1.7/16" 3/4" 12 M30X2 S20 34,5 1,36 36 1,42 1.7/16" 3/4" 10 05 3,5 0,14 3 S10 0,12 2446 3 0,12 46 1,81 1.13/16" 6 0,24 50 1,97 2" 12 3/8” M36X206 S25M18X1,5 39,5 1,56 16 M36X2 S25 40,5 1,59 FS13B-16-42 25 1" 16 M42X2 S30 43 1,69 FS13B-06-2231 FS13B-20-42 10 1.1/4" FS13B-20-52 31 FS13B-06-24 1.1/4" FS13B-24-52 38 FS13B-08-24 1.1/2" 12 24 10 3/8” M20X1,5 S12 20 3/8” M42X206 S30M22X1,5 35 1,38 S14 6 20 M52X2 S38 48 1,89 M52X2 S38 48 1,89 3/8” 1/2” 06 06 08 1,18 1,141.3/16" S12 1" 10 1,18 M20X1,5 25 27 26,5 CH [mm] 10 0,12 B 0,94 0,8715/16" 08 1/4“M24X1,5 04 5/16” 26,5 30 [in] S8 3 S16 FS13B-16-36 FS13B-06-20 0,10 0,08 2,5 PIPE 2 M16X1,5 8 1/4”M24X1,5 04 [mm] 1,06 1,81 0,941.13/16" 1,04 [in] 0,2429,5 50 1,16 2" 1,97 4 0,16 27 1,063 1.1/16” 6,5 0,26 60 2,36 2.3/8" 6,5 0,26 60 2,36 1,12 2.3/8" 3 0,12 30 1,181 1.3/16” 1,14 3 0,12 30 1,181 1.3/16” M24X1,5 S16 M24X1,5 S16 28,5 29 FS12 FS13B-10-30 16 5/8” 10 FS13M30X2 S20 34 1,34 3,5 0,14 36 1,417 1.7/16” FS13B-12-30 19 3/4” 12 M30X2 S20 34,5 1,36 3,5 0,14 36 1,417 1.7/16” FS13B-12-36 19 3/4” 12 M36X2 S25 39,5 1,56 3 0,12 46 1,811 1.13/16” FS13B-16-36 25 1” 16 M36X2 S25 42 1,65 3 0,12 46 1,811 1.13/16” FS13B-16-42 25 1” 16 M42X2 S30 43 1,69 6 0,24 50 1,969 2” FS13B-20-42 31 1.1/4” 20 M42X2 S30 36 1,42 6 0,24 50 1,969 2” FS13B-20-52 31 1.1/4” 20 M52X2 S38 48 1,89 6,5 0,26 60 2,362 2.3/8” FS13B-24-52 38 1.1/2” 24 M52X2 S38 48 1,89 6,5 0,26 60 2,362 2.3/8” B Series Catalogue_Rev00.2007.xls Pagina 37 di 85 The document is exclusive property of INTERTRACO S.p.A.. All rights are reserved. ➔ 66 - © Intertraco (Italia) S.p.A. All rights are reserved FS13B-04-14 B DN INCH SIZE 6 1/4" 04 M14X1,5 S6 [mm] [in] [mm] [in] [mm] [in] inin 22 0,87 2,5 0,10 17 0,669 11/16" 3/4" TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES 6 UNIVERSALE 1/4" 04 M18X1,5 S10 28 E 4 1,10 FS13B-04-18- SERIE RACCORDI A PRESSARE PER TUBI TRECCIATI SPIRALI2 0,08 22 0,866 7/8" 8 5/16"FÜR05GEFLECHT M20X1,5- UND S12 27 1,06 2 0,08 24 0,945 15/16" FS13B-05-20 PRESSARMATUREN UNIVERSALSERIE SPIRALSCHLÄUCHE 10 3/8" 06 M18X1,5 S10 22 0,87 2 0,08 22 0,866 FS12B-06-18 RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES 7/8" FS13B-04-16 6 1/4" 04 M16X1,5 S8 26,5 1,04 2,5 0,10 19 0,748 FS13B-06-20 10 3/8" 06 M20X1,5 S12 28,5 1,12 2 0,08 24 0,945 15/16" FS13B-06-22 10 3/8" 06 M22X1,5 S14 28,5 1,12 4 0,16 27 1,063 1.1/16" FS13B-06-24 10 3/8" 06 M24X1,5 S16 3 0,12 30 1,181 1.3/16" FS13B-08-24 12 1/2" 08 M24X1,5 S16 32 1,26 3 0,12 30 1,181 1.3/16" FS13B-10-30 16 5/8" 10 M30X2 S20 36 1,42 3,5 0,14 36 1,417 1.7/16" FS13B-12-30 19 3/4" 12 M30X2 S20 34,5 1,36 3,5 0,14 36 1,417 1.7/16" FS13B-12-36 19 3/4" 12 M36X2 S25 39,5 1,56 3 0,12 46 1,811 1.13/16" FS13B-16-36 25 1" 16 M36X2 S25 40,5 1,59 3 0,12 46 1,811 1.13/16" FS13B-16-42 25 1" 16 M42X2 S30 43 1,69 6 0,24 50 1,969 FS13B-20-42 31 1.1/4" 20 M42X2 S30 35 1,38 6 0,24 50 1,969 2" FS13B-20-52 31 1.1/4" 20 M52X2 S38 48 1,89 6,5 0,26 60 2,362 2.3/8" FS13B-24-52 38 1.1/2" 24 M52X2 S38 48 1,89 6,5 0,26 60 2,362 2.3/8" 2" Nut type FS13 FS12 NUT TYPE TIPO DI DADO HUTTER TYP TIPO DE TUERCA B Series Catalogue_Rev02.2007.xls Pag The document is exclusive property of INTERTRACO S.p.A.. All rights are reserved. © Intertraco (Italia) S.p.A. All rights are reserved - 67 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES FS43B METRIC METRIC HEAVY FEMALE SWIVEL - 45° ELBOW (24° CONE SEAT) A CH D FEMMINA METRICA 45° O-RING CONO 24° SERIE PESANTE DKOS 45° - 24° KONUS T HEMBRA GIRATORIA a 45° METRICA CONO 24° SERIE PESADA B FS43B CODE CODICE CODICE BEST.-NR CODIGO METRIC HEAVY FEMALE SWIVEL - 45° ELBOW (24° CONE SEAT) Ø HOSE Ø TUBO Ø SCHLAUCH HOSE BORE Ø MANGUERA DN INCH FS43B-04-14 DN6 INCH 1/4" FS43B-04-14 FS43B-04-16 66 FS43B-04-18 FS43B-04-16 SIZE T T PIPE PIPE A A [mm] [mm] 40,5 B [in] [in] 1,59 [mm] B D [in] [mm] 0,10 [in] 2,5 [mm] D CH [in] [mm]0,79[in] 20 [mm] [in] CH inin SIZE 04 [mm] [in] 17 0,6693 11/16" M14X1,5 S6 1/4” 1/4" 04 04 M14X1,5 M16X1,5 S6 S8 66 1/4" 1/4” 04 M18X1,5 M16X1,5 S10 S8 FS43B-05-20 FS43B-04-18 68 5/16" 1/4” 05 04 M20X1,5 M18X1,5 S12 S10 44 1,73 42,5 1,67 22 0,08 15/16" 7/8” 0,08 21,521 0,85 0,83 24 220,9449 0,866 FS43B-06-20 10 3/8" 06 M20X1,5 S12 46 1,81 2 0,08 21,5 0,85 24 S14 49,5 1,95 4 0,16 23,4 0,92 27 S16 70 2,76 3 0,12 23 0,91 30 [in] 40,5 1,59 2,52,5 0,10 0,10 20 20 0,79 0,79 19 170,7480,669 39 1,54 3/4" 11/16” 42,5 57,5 1,063 1.1/16" S12 FS43B-06-20 10 3/8” 06 M20X1,5 S12 FS43B-06-22 FS43B-10-30 1016 3/8” 5/8" 06 10 M22X1,5 M30X2 S14 S20 FS43B-08-24 FS43B-12-30 1219 1/2” 3/4" 08 12 M24X1,5 M30X2 S16 S20 49,5 1,95 3,54 59 2,32 61 2,78 2,40 3,53 70,5 FS43B-12-36 FS43B-10-30 1619 3/4" 5/8” 12 10 M36X2 M30X2 S25 S20 81,5 66,6 3,21 2,62 33,5 0,12 1.13/16"1.7/16” 0,14 34,5 28,6 1,36 1,13 46 361,8111,417 FS43B-16-36 FS43B-12-30 1925 1" 3/4” 16 12 M36X2 M30X2 S25 S20 88,5 70,5 3,48 2,78 33,5 0,12 1.13/16"1.7/16” 0,14 35,5 28,6 1,40 1,13 46 361,8111,417 S30 84,5 3,33 6 0,24 34 1,34 50 S30 103 4,06 6 0,24 48 1,89 50 S38 113,4 4,46 6,5 0,26 45,6 1,80 60 FS43B-08-24 FS43B-16-42 12 25 FS43B-12-36 19 FS43B-16-36 25 FS43B-16-42 FS43B-24-52 2538 FS43B-20-42 1/2" 1" 08 16 M24X1,5 M42X2 46 21,5 0,85 15/16” 24 0,945 15/16” 1,1811 1.3/16" 0,16 2623,4 1,02 0,92 36 271,4173 1,063 1.1/16” 1.7/16" 0,12 28,626 1,13 1,02 36 301,4173 1,181 0,14 1.7/16"1.3/16” 0,14 2" 2,3622 2.3/8" 16 M36X2 S25 1.1/2" 1” 16 24 M42X2 M52X2 S30 S38 31 1.1/4” 20 M42X2 S30 91,5 4,80 3,60 6,56 103 4,06 6 FS43B-20-52 31 1.1/4” 20 M52X2 S38 113,4 4,46 6,5 0,26 45,6 1,80 60 2,362 2.3/8” FS43B-24-52 38 1.1/2” 24 M52X2 S38 127,6 5,02 6,5 0,26 48,3 1,90 60 2,362 2.3/8” 31 1.1/4" 20 M52X2 88,5 3,48 3 122 68 - © Intertraco (Italia) S.p.A. All rights are reserved 0,12 35,5 1,36 2" 1” FS43B-20-52 M42X2 34,5 1,9685 S25 20 0,12 1,9685 M36X2 1.1/4" 3 0,08 0,945 12 31 3,21 2 24 3/4” FS43B-20-42 81,5 1,81 0,85 15/16" M20X1,5 M22X1,5 21,5 0,9449 05 06 0,08 3/4” 5/16” 3/8" 2 0,08 7/8" 0,10 17 21 0,67 0,83 22 190,8661 0,748 8 10 1,73 22,5 FS43B-05-20 FS43B-06-22 44 1,67 2,26 1,40 46 1,811 1.13/16” 46 1,811 1.13/16“ 0,24 50 35 1,97 1,38 60 502,3622 1,969 2.3/8" 0,24 48 1,89 50 1,969 0,26 2“ 2” B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES FS93B METRIC METRIC HEAVY FEMALE SWIVEL - 90° ELBOW (24° CONE SEAT) A T FS93B CODE CODICE CODICE BEST.-NR FS93B-04-14 CODIGO FS93B-04-16 Ø HOSE Ø TUBO DN Ø INCH SIZE SCHLAUCH 6 Ø MANGUERA 1/4" 04 FS93B-04-18 6 1/4" 04 FS93B-05-20 8 5/16" 05 6 FS93B-04-16 FS92B-06-18 106 FS93B-06-20 FS93B-04-18 FS93B-06-22 FS93B-08-24 FS92B-06-18 FS93B-10-30 FS93B-12-30 FS93B-06-20 1/4” D 1,48 1,48 [in] M18X1,5 S10 33 1,30 2 0,08 33,5 1,32 22 0,8661 7/8" M20X1,5 S12 35 1,38 2 1,44 24 0,9449 15/16" M14X1,5 06 M30X2 M18X1,5 S20 S20 06 M30X2 M20X1,5 16 FS93B-12-36 37,5 37,5 [mm] 3/8” 10 5/8" 1" FS93B-12-30 0,10 04 10 12 25 3/8” S6 S8 40 40,5 1,5733 2 32 S10 1,26 34,5 2 M22X1,5 S14 38,5 1,52 4 M24X1,5 S16 54 2,13 3 05 06 M20X1,5 S12 35 2,5 0,10 1,30 0,08 2,5 44 0,08 1,36 0,16 0,08 3/4” 239 1,54 0,08 24 38 0,9449 1,5015/16"22 0,866 7/8” 46 1,81 27 1,063 1.1/16" 30 1,1811 1.3/16" 0,08 2,11 44 1,4173 1,731.7/16"22 36 0,866 7/8” 65 0,14 S12 2,5635 3,5 1,38 265 2,56 0,08 36 36 1,4173 1,421.7/16"24 0,945 15/16” 72,5 2,85 46 1,811 1.13/16" 2,87 46 1,811 1.13/16" 27 1,063 1.1/16” 2,85 3 M36X2 S25 78,5 3,09 3 S14 38,5 S16 2,7454 69,5 0,12 2,13 0,24 378 0,12 3,07 54,6 2,15 50 1,9685 30 1,181 1.3/16” 95,6 3,5 3,76 0,14 60 2,3622 57,5 2,262.3/8"36 1,417 1.7/16” M52X2 104 S20 60,5 6,5 0,26 73 94 3,70 46 1,44 0,16 1.1/2" 4,09 2,13 4 0,12 38 6 54 1,52 102 0,26 S20 4,02 55,5 6,5 2,19 M30X2 0,748 2 53,5 M52X2M30X2 S38 12 40,5 1,59 7/8" 19 22 0,8661 S10 2,0540 3,5 1,57 52 0,14 08 M42X2 M24X1,5 S30 3/4” 0,10 1,73 15/16” 1"1/2” 16 19 11/16” 0,945 72,5 S38 0,669 24 1.1/4" 5/8” 20 10 0,79 [in] 17 36,5 20 [in] 36,5 0,12 31 16 24 11/16" 0,08 S25 1,38 0,6693 19 0,748 [mm] [in] 3/4"[mm] 2 M36X2 M22X1,5 1,59 17 CH inin [in]0,10 08 25 [mm] 2,5 1/2" FS93B-16-36 [in] 1,30 [mm]2,5 12 12 1,08 [in] CH D[in] 33 S12 04M20X1,5 M18X1,5 3/4" [in] D [mm]B 27,5 06 10 16 PIPE B S8 3/8" 5/16” [mm] A [mm] S6 3/8" 1/4” 06 8 A SIZEM16X1,5 10 3/4" 3/8” 12 FS93B-24-52 M14X1,5 T 106 19 FS93B-20-52 FS93B-10-30 PIPE 04M18X1,5 M16X1,5 S10 19 10 FS93B-08-24 FS93B-16-42 T 1/4” 06 3/8" FS93B-12-36 FS93B-06-22 CH HOSE BORE 1/4" INCH04 FS93B-05-20 HEMBRA GIRATORIA a 90° METRICA CONO 24° SERIE PESADA METRIC HEAVY FEMALE SWIVEL - 90° ELBOW (24° CONE SEAT) 6 DN FS93B-04-14 DKOS 90° - 24° KONUS B FEMMINA METRICA 90° O-RING CONO 24° SERIE PESANTE 60 2,38 3,5 0,14 60,6 1,81 2,3622 2" 2.3/8" 2,39 36 1,417 1.7/16” 19 3/4” 12 M36X2 S25 72,5 2,85 3 0,12 72,5 2,85 46 1,811 1.13/16” 25 1” 16 M36X2 S25 78,5 3,09 3 0,12 73 2,87 46 1,811 1.13/16” FS93B-16-42 25 1” 16 M42X2 S30 81,3 3,20 6 0,24 77 3,03 50 1,969 2” FS93B-20-52 31 1.1/4” 20 M52X2 S38 102 4,02 6,5 0,26 95,6 3,76 60 2,362 2.3/8” FS93B-24-52 38 1.1/2” 24 M52X2 S38 114 4,49 6,5 0,26 106 4,17 60 2,362 2.3/8” FS93B-16-36 FS92 FS93 B Series Catalogue_Rev00.2007.xls Pagina 39 di 85 The document is exclusive property of INTERTRACO S.p.A.. All rights are reserved. © Intertraco (Italia) S.p.A. All rights are reserved - 69 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES MJ10B JIC JIC 37° MALE B ES MASCHIO JIC CONO 37° T AGJ JIC-Anschlussstutzen 37° Konus mit UNF Gewinde MACHO FIJO JIC 37° A MJ10B CODE CODICE CODICE BEST.-NR CODIGO JIC 37° MALE Ø HOSE Ø TUBO HOSEØBORE SCHLAUCH Ø MANGUERA DN INCH SIZE B B [mm] [in] [mm] ES ES [mm] [in] [in] inin 25,8 [mm] 1,02 [in] 0,55[mm]14 14 [in] 0,55 [mm] 9/16" MJ10B-03-04 5 DN3/16" INCH 03 MJ10B-03-04 MJ10B-04-04 6 5 1/4" 3/16” 04 03 - 20 7/16” - 2026,5 7/16" 25,8 1,04 1,02 0,55 14 14 14 0,55 0,55 14 9/16" 0,551 9/16” MJ10B-04-05 MJ10B-04-04 6 6 1/4" 04 1/4” 1/2" 04 - 20 7/16” - 2026,5 1,04 26,5 14 1,04 0,55 14 14 0,55 0,55 9/16" 14 0,551 9/16” MJ10B-04-06 6 1/4" 04 9/16" - 18 0,67 11/16" MJ10B-05-05 0,551 9/16” 8 05 1/2" - 20 0,55 9/16" MJ10B-05-06 8 05 9/16" - 18 0,67 11/16" 17 0,669 11/16” MJ10B-06-06 10 06 9/16" - 18 0,67 11/16" 14 0,551 9/16” MJ10B-05-06 MJ10B-06-08 10 MJ10B-06-10 MJ10B-06-06 10 10 3/8" MJ10B-08-06 MJ10B-06-08 12 10 1/2" MJ10B-08-08 12 MJ10B-08-10 12 MJ10B-08-12 12 MJ10B-10-08 16 MJ10B-08-10 MJ10B-10-10 16 12 5/8" 1/2” 10 MJ10B-10-12 MJ10B-08-12 16 12 5/8" 10 1/2” MJ10B-12-10 MJ10B-10-08 12 5/8” MJ10B-12-12 19 16 3/4" 19 3/4" MJ10B-12-14 19 MJ10B-12-16 19 MJ10B-04-05 MJ10B-04-06 MJ10B-05-05 MJ10B-06-10 MJ10B-08-06 MJ10B-08-08 MJ10B-10-10 MJ10B-10-12 MJ10B-12-10 MJ10B-16-16 6 6 8 5/16" 5/16" 3/8" 1/4” 1/4” 5/16” 8 3/8" 5/16” 06 10 12 1/2" 1/2" 1/2" 16 3/4" 3/4" 27,5 04 1/2” - 20 27,5 04 9/16” - 18 05 1/2” - 20 28 27,5 1,08 14 0,55 1,08 14 0,55 1,10 14 0,55 1,08 14 0,55 26,5 27,5 27,5 1,04 1,08 1,08 14 14 14 17 14 17 17 0,55 0,55 0,55 1,08 0,66 14 19 16,7 0,55 0,75 17 3/4" 0,669 11/16” 06 3/8” 7/8" 06 - 14 9/16” - 1834,8 1,37 27,5 19,3 1,08 0,76 14 24 0,94 0,55 15/16" 17 0,669 11/16” 08 3/8” 7/16" 06 - 20 3/4” - 1628,1 1,11 30,2 14 1,19 0,5516,719 0,75 0,66 3/4" 19 0,748 3/4” 0,75 3/4" 0,94 15/16" 24 0,945 15/16” 1,06 1.1/16" 19 0,748 3/4” 19 0,748 3/4” 08 3/4" - 16 08 7/8" - 14 08 1.1/16" - 12 3/8” 1/2” 34 19 1,37 19,3 0,76 24 1,56 21,9 0,86 08 9/16” - 18 3/4" - 16 08 3/4” - 1633,7 30,7 1,33 08 - 14 7/8" 7/8” - 1435,3 1.1/16" 38,9 08 - 121.1/16” - 12 34,9 39,5 12 1.3/16" - 12 12 1.5/16" - 12 3/4” 16 0,66 7/8” - 14 12 5/8” 16,7 06 3/4” - 1636,8 1.1/16" - 12 39,4 5/8” 1,34 7/8" 10 - 14 34,8 28 14 0,55 27 0,76 0,94 24 15/16" 0,945 15/16” 1,53 38,9 21,9 1,53 0,8621,927 1,06 0,86 1.1/16" 27 1,063 1.1/16” 1,45 33,7 19,3 1,33 0,7616,727 1,06 0,66 1.1/16" 24 0,945 15/16” 1,06 1.1/16" 1,26 1.1/4" 24 0,945 15/16” 1,42 1.7/16" 27 1,063 1.1/16” 27 1,063 1.1/16” 16,7 1,55 21,9 0,86 27 1,58 22,6 0,89 32 1,80 23,1 0,91 36 35,3 10 1.1/16” - 12 38,9 12 0,76 34,9 1,39 7/8” - 14 45,6 1,10 19,3 1,21 0,6616,724 1,37 0,7619,324 19,3 10 40,1 1,37 36,8 1,83 1,53 19,3 0,76 21,9 0,86 MJ10B-12-12 MJ10B-16-20 3/4” 16 12 - 121.1/16” - 12 1.5/8" 58,3 39,4 2,30 MJ10B-20-20 MJ10B-12-14 31 191.1/4" 3/4” 20 1.5/8" 49,5 12 - 121.3/16” - 12 1,95 40,1 24,3 1,58 0,9622,646 1,81 0,89 MJ10B-24-24 MJ10B-12-16 38 191.1/2" 3/4” 24 51 2" 32 1.7/8" 12 - 121.5/16” - 1266 2.1/2" - 12 84,6 2,60 45,6 27,5 1,80 1,0823,150 1,97 0,91 1.5/16" - 12 7/8” - 1446,6 1,39 0,66 0,94 1,45 0,9119,336 1,55 0,9621,946 24,3 MJ10A-32-32 [in] 27,5 1,31 19 1" 25 19 1" 25 14 [in] 05 - 16 9/16” - 1833,2 3/4" 12 5/8" 1/2” 10 16 SIZE 7/16" - 20 A A T T 70 - © Intertraco (Italia) S.p.A. All rights are reserved 3,33 23,1 33,9 1,33 65 15/16" 0,76 1,42 0,86 1,81 27 1.13/16" 1,063 1.1/16” 1.13/16" 32 1,260 1.1/4” 1,417 1.7/16” 2,56 1.7/16" 2" 36 2.9/16" ➔ B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES CODE CODICE BEST.-NR CODIGO Ø HOSE Ø TUBO Ø SCHLAUCH Ø MANGUERA A T DN INCH SIZE MJ10B-16-16 25 1” 16 MJ10B-16-20 25 1” MJ10B-20-20 31 MJ10B-24-24 MJ10B-32-32 B ES [mm] [in] [mm] [in] [mm] [in] 1.5/16” - 12 46,6 1,83 23,1 0,91 36 1,417 1.7/16” 16 1.5/8” - 12 58,3 2,30 24,3 0,96 46 1,811 1.13/16” 1.1/4” 20 1.5/8” - 12 62,8 2,47 24,3 0,96 46 1,811 1.13/16” 38 1.1/2” 24 1.7/8” - 12 66 2,60 27,5 1,08 50 1,969 2” 51 2” 32 2.1/2” - 12 86,9 3,42 33,9 1,33 65 2,559 2.9/16” [in] © Intertraco (Italia) S.p.A. All rights are reserved - 71 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES JIC FJ11B CH JIC 37° FEMALE SWIVEL FEMMINA JIC DRITTA SV. 37° T DKJ JIC-Dichtkopf 37° Konus UNF Gewinde HEMBRA GIRATORIA RECTA JIC 37° A JIC 37° FEMALE SWIVEL FJ11B CODE CODICE BEST.-NR CODIGO B Ø HOSE Ø TUBO Ø SCHLAUCH Ø MANGUERA DN INCH SIZE FJ11B-04-04 6 1/4” 04 FJ11B-04-05 6 1/4” FJ13B-04-06 6 FJ13B-04-08 A T B CH [mm] [in] [mm] [in] [mm] [in] 7/16” - 20 14,8 0,58 8,5 0,33 15 0,591 5/8” 04 1/2” - 20 15,5 0,40 10,5 0,41 17 0,669 11/16” 1/4” 04 9/16” - 18 14,9 0,59 9,5 0,37 19 0,748 3/4” 6 1/4” 04 3/4” - 16 18,5 0,73 10,7 0,42 19 0,748 3/4” FJ11B-05-05 8 5/16” 05 1/2” - 20 15,5 0,61 10,5 0,41 17 0,669 11/16” FJ16B-05-05 8 5/16” 05 1/2” - 20 15,5 0,61 10,5 0,41 17,46 0,687 11/16” FJ11B-05-06 8 5/16” 05 9/16” - 18 17 0,67 9,5 0,37 19 0,748 3/4” FJ11B-06-06 10 3/8” 06 9/16” - 18 17 0,67 9,5 0,37 19 0,748 3/4” FJ13B-06-08 10 3/8” 06 3/4” - 16 18,5 0,73 10,7 0,42 24 0,945 15/16” FJ11B-08-08 12 1/2” 08 3/4” - 16 18,4 0,72 10,7 0,42 24 0,945 15/16” FJ13B-08-10 12 1/2” 08 7/8” - 14 20,5 0,81 12,5 0,49 27 1,063 1.1/16” FJ12B-08-12 12 1/2” 08 1.1/16” - 12 22,5 0,89 13,8 0,54 32 1,260 1.1/4” FJ11B-10-10 16 5/8” 10 7/8” - 14 21,3 0,84 12,7 0,50 27 1,063 1.1/16” FJ12B-10-12 16 5/8” 10 1.1/16” - 12 20,5 0,81 13,8 0,54 32 1,260 1.1/4” FJ12B-12-12 19 3/4” 12 1.1/16” - 12 21 0,83 13,8 0,54 32 1,260 1.1/4” FJ12B-12-16 19 3/4” 12 1.5/16” - 12 22 0,87 16 0,63 38 1,496 1.1/2” FJ12B-16-16 25 1” 16 1.5/16” - 12 23 0,91 16 0,63 38 1,496 1.1/2” FJ12B-16-20 25 1” 16 1.5/8” - 12 29,6 1,17 16 0,63 50 1,969 2” FJ12B-20-20 31 1.1/4” 20 1.5/8” - 12 29,1 1,15 16 0,63 50 1,969 2” FJ12B-20-24 31 1.1/4” 20 1.7/8” - 12 31,4 1,24 18,5 0,73 55 2,165 2.3/16” [in] ➔ 72 - © Intertraco (Italia) S.p.A. All rights are reserved B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES CODE CODICE BEST.-NR CODIGO T CH Ø HOSE Ø TUBO Ø SCHLAUCH Ø MANGUERA DN INCH SIZE FJ12B-24-24 38 1.1/2” 24 FJ12B-32-32 51 2” 32 A B B CH [mm] [in] [mm] [in] [mm] [in] 1.7/8” - 12 31,4 1,24 18,5 0,73 55 2,165 2.1/2” - 12 38 1,50 24 0,94 75 2,953 [in] 2.3/16” JIC 37° FEMALE SWIVEL FJ11B CODICE A T HOSE BORE DN INCH SIZE T A [mm] B [in] [mm] CH [in] [mm] [in] inin Nut type FJ11 FJ12 FJ13 FJ16 (IMPERIAL NUT) NUT TYPE TIPO DI DADO HUTTER TYP TIPO DE TUERCA © Intertraco (Italia) S.p.A. All rights are reserved - 73 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES FJH11B JIC JIC 37° FEMALE SWIVEL (DOUBLE HEX) CH ES T FEMMINA JIC DRITTA CON CONTROESAGONO SV. 37° A FJH11B-03-04 FJH11B-03-04 FJH16B-03-04 HEMBRA GIRATORIA RECTA JIC 37° con controexagono B JIC 37° FEMALE SWIVEL (DOUBLE HEX) FJH11B CODE CODICE BEST.-NR CODICE CODIGO DKJ JIC-Dichtkopf 37° Konus UNF Gewinde MIT KONTERSECHSKANT Ø HOSE Ø TUBO ØHOSE SCHLAUCH BORE Ø MANGUERA DN DN 5 INCH INCH 3/16" SIZE SIZE T A T [mm] [mm] [in] [mm] ES ES [in] [mm] [in] 11,11 0,44 [in] [mm] [in] [mm] [mm] [in] 15 0,59 [mm] [in] in in [in] 7/16” - 20 7/16" - 20 19,6 19,6 0,77 0,77 8,5 8,5 0,33 0,33 11,11 11,11 0,437 7/16" 7/16” 14,2915 0,5626 0,491 0,44 9/16" 5/8” FJH16B-03-04 FJH16B-03-05 5 5 3/16” 3/16" 0303 7/16” 1/2"- -20 20 19,6 20,8 0,77 0,82 8,5 10,5 0,33 0,41 11,11 14 0,437 9/16" 7/16” 17,46 14,29 0,463 0,55 0,6874 11/16" 9/16” FJH11B-04-04 FJH16B-03-05 1/4" 5 6 3/16” 0304 7/16" - 20 1/2” - 20 20,8 20,8 0,82 0,82 8,5 10,5 0,33 0,41 14 14 0,55 0,551 9/16" 9/16” 04 7/16" - 20 20,8 0,82 8,5 8,5 0,33 0,33 14 14 0,55 9/16" 0,85 10,5 0,41 14 0,55 9/16" 17 0,6693 11/16" 0,37 14 0,55 9/16" 19 0,748 9/16" 6 8 1/4” 5/16" 0405 9/16” - 18 9/16" - 18 FJH16B-04-06 FJH16B-05-06 6 8 1/4” 5/16" 0405 FJH11B-06-04 FJH11B-05-06 3/8" 8 10 5/16” 10 3/8" FJH16B-06-04 FJH16B-05-06 8 5/16” 10 3/8" FJH11B-06-05 FJH11B-06-04 10 3/8” 10 3/8" FJH11B-06-06 FJH16B-06-04 10 3/8” 10 3/8" FJH16B-06-06 FJH11B-06-05 3/8" FJH11B-06-08 10 10 3/8” 6 6 6 6 6 6 1/4” 1/4" 04 04 7/16” - 20 1/2" - 20 20,8 21,5 0,82 0,33 [in] 7/16" 5 5 3/16” 3/16" 0303 1/4" 8,5 inin 7/16" - 20 6 0,77 [in] CH CH 03 FJH16B-04-04 FJH11B-04-04 FJH11B-04-05 FJH16B-04-04 FJH11B-04-06 FJH11B-04-05 FJH16B-04-06 FJH11B-04-06 FJH11B-05-06 19,6 B B A 9/16" 0,491 5/8” 7/16” - 20 20,8 0,82 8,5 0,33 1/4” 04 1/2” - 20 21,5 0,85 10,5 0,41 0,37 14 0,55 2221 0,87 0,83 9,5 9,5 0,37 0,37 14 14 0,551 9/16" 9/16” 0,55 9/16” - 18 9/16" - 18 2221 0,87 0,83 9,5 9,5 0,37 0,37 14 14 0,551 9/16" 9/16” 17,46 17,46 0,687 0,55 0,6874 11/16"11/16” 0506 7/16" - 20 9/16” - 18 21,8 20 0,86 0,79 8,5 9,5 0,33 0,37 17 14 0,67 0,551 11/16" 9/16” 06 7/16" - 20 21,8 0,86 8,5 9,5 0,33 0,37 17 14 0,67 11/16" 0,89 10,5 0,41 17 0,67 11/16" 17 0,37 17 0,67 11/16" 19 11/16" 1/4" 04 05 06 9/16" - 18 9/16" - 18 9/16” - 18 1/2" - 20 23 21,5 20 22,5 0,91 0,85 0,79 9,5 9,5 14 0,551 9/16” 9/16” 17 0,669 11/16” 3/4" 17,46 0,6874 11/16" 19 19 0,7480,748 3/4" 3/4” 15 19 0,5906 5/8" 0,748 14,29 0,5626 17,46 0,687 11/16” 0,6693 11/16" 0,86 8,5 0,33 06 7/16” - 20 21,8 0,86 8,5 0,33 0,37 17 0,67 0606 1/2” - 20 3/4" - 16 22,5 25,9 0,89 1,02 10,5 10,7 0,41 0,42 17 19 0,669 0,75 11/16” 24 17 0,9449 0,669 3/4" 15/16"11/16” FJH11B-06-06 3/8" FJH16B-06-08 10 10 3/8” 0606 9/16” 3/4"- 18 - 16 23 25,9 0,91 1,02 9,5 10,7 0,37 0,42 17 19 0,669 0,75 11/16” 22,2219 0,8748 0,748 3/4" 7/8" 3/8" FJH11B-06-10 10 10 3/8” FJH16B-06-06 0606 7/8"- 18 - 14 9/16” 29,3 23 1,15 0,91 12,7 9,5 0,50 0,37 22 17 0,87 0,669 12 1/2" FJH12B-06-12 FJH11B-06-08 10 3/8” 12 1/2" FJH11B-08-06 FJH16B-06-08 10 3/8” 12 1/2" FJH16B-08-06 FJH11B-06-10 10 3/8” 12 1/2" FJH11B-08-08 06 1,40 13,8 10,7 0,54 0,42 27 1,06 1.1/16" 32 9,5 0,37 19 0,75 3/4" 19 0,37 19 0,75 3/4" 06 06 08 9/16" - 18 1.1/16" - 12 3/4” - 16 9/16" - 18 24 35 25,9 24,5 0,94 0,94 1,02 0,96 9,5 9,5 17 19 0,748 5/8” 14,29 0,563 9/16” 3/4" 17,46 0,6874 11/16" 3/4” 7/8" 1.1/16"11/16” 11/16” 2717,461,0630,687 3/4” 1,2598 1.1/4" 0,945 0,748 15/16” 3/4" 25,9 1,02 10,7 0,42 06 7/8” - 14 28,3 1,11 12,7 0,50 0,42 19 0,75 3/4" 35 25,4 1,38 1,00 13,8 10,7 0,54 0,42 27 19 1,063 0,75 1.1/16” 22,2232 0,8748 1,260 3/4" 7/8" 1.1/4” 29,8 23,5 1,17 0,93 12,7 9,5 0,50 0,37 22 19 0,87 0,748 7/8" 3/4” 08 3/4" - 16 FJH12B-06-12 1/2" FJH16B-08-08 12 12 1/2” 0608 1.1/16” 3/4"-- 12 16 1/2" FJH11B-08-10 12 12 1/2” FJH11B-08-06 0808 7/8"- 18 - 14 9/16” 24,5 25,4 0,96 1,00 9,5 10,7 22 0,866 3/4” 24 3/4” - 16 9/16" - 18 0,748 11/16” 0,591 0,748 06 08 19 0,669 15 3/4” 9/16" 21,8 24 11/16” 0,563 7/16” - 20 9/16" - 18 0,669 9/16” 14,29 06 06 17 0,551 9/16” 15 04 04 0,551 9/16” 1517,46 0,5906 5/8" 11/16” 0,687 14,29 0,5626 1/4” 1/4" 14 0,551 5/8" 7/8” 22,22 0,875 7/8” 27 1,063 1.1/16” 17,46 0,6874 11/16" 24 0,9449 15/16" 27 19 1,0630,748 1.1/16" 3/4” FJH12B-08-12 12 1/2" 08 1.1/16" - 12 35,5 1,40 13,8 0,54 27 1,06 1.1/16" 32 1,2598 1.1/4" FJH12B-08-16 19 3/4" 12 1.5/16" - 12 36 1,42 16 0,63 32 1,26 1.1/4" 38 1,4961 1.1/2" FJH11B-10-08 16 5/8" 10 3/4" - 16 27,4 1,08 10,7 0,42 22 0,87 7/8" 24 0,9449 15/16" 5/8"S.p.A. 10 All rights 7/8" - 14 are 29,8 1,17 74FJH11B-10-10 - © Intertraco16(Italia) reserved 12,7 0,50 22 0,87 7/8" 27 1,063 1.1/16" 13,8 0,54 27 1,06 1.1/16" 32 1,2598 1.1/4" FJH12B-10-12 16 5/8" 10 1.1/16" - 12 35,5 1,40 ➔ A B B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES 37° FEMALE SWIVEL (DOUBLE HEX) RACCORDI A FJH11B PRESSARE - SERIEJIC UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE HOSE BORE A B ES CH RACORES A PRENSAR CODICE SERIE UNIVERSAL PARA TMANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES DN INCH SIZE [mm] [in] [mm] [in] [mm] [in] inin [mm] [in] in in Nut type FJH11 FJH12 FJH16 (IMPERIAL NUT) NUT TYPE TIPO DI DADO HUTTER TYP TIPO DE TUERCA CODE CODICE BEST.-NR CODIGO Ø HOSE Ø TUBO Ø SCHLAUCH Ø MANGUERA DN INCH SIZE FJH16B-08-06 12 1/2” 08 FJH11B-08-08 12 1/2” FJH16B-08-08 12 FJH11B-08-10 A T B ES CH [mm] [in] 3/4” 17,46 0,687 11/16” 0,748 3/4” 24 0,945 15/16” 19 0,748 3/4” 22,22 0,875 7/8” 0,50 22 0,866 7/8” 27 1,063 1.1/16” 13,8 0,54 27 1,063 1.1/16” 32 1,260 1.1/4” 1,42 16 0,63 32 1,260 1.1/4” 38 1,496 1.1/2” 27,4 1,08 10,7 0,42 22 0,866 7/8” 24 0,945 15/16” 7/8” - 14 28,8 1,13 12,7 0,50 22 0,866 7/8” 27 1,063 1.1/16” 1.1/16” - 12 35,5 1,40 13,8 0,54 27 1,063 1.1/16” 32 1,260 1.1/4” [mm] [in] [mm] [in] [mm] [in] 9/16” - 18 23,5 0,93 9,5 0,37 19 0,748 08 3/4” - 16 25,4 1,00 10,7 0,42 19 1/2” 08 3/4” - 16 25,4 1,00 10,7 0,42 12 1/2” 08 7/8” - 14 28,8 1,13 12,7 FJH12B-08-12 12 1/2” 08 1.1/16” - 12 35,5 1,40 FJH12B-08-16 19 3/4” 12 1.5/16” - 12 36 FJH11B-10-08 16 5/8” 10 3/4” - 16 FJH11B-10-10 16 5/8” 10 FJH12B-10-12 16 5/8” 10 FJH16B-12-08 19 3/4” 12 The- 16 document property S.p.A.. All22,22 rights are reserved. 3/4” 35,3 is exclusive 1,39 10,7 0,42of INTERTRACO 27 1,063 1.1/16” 0,875 7/8” FJH11B-12-10 19 3/4” 12 7/8” - 14 36,3 1,43 12,7 0,50 27 1,063 1.1/16” 27 1,063 1.1/16” FJH12B-12-12 19 3/4” 12 1.1/16” - 12 36 1,42 13,8 0,54 27 1,063 1.1/16” 32 1,260 1.1/4” FJH11B-12-14 19 3/4” 12 1.3/16” - 12 31 1,22 14,5 0,57 30 1,181 1.3/16” 36 1,417 1.7/16” FJH12B-12-16 19 3/4” 12 1.5/16” - 12 36 1,42 16 0,63 32 1,216 1.1/4” 38 1,496 1.1/2” FJH12B-16-12 25 1” 16 1.1/16” - 12 35 1,38 13,8 0,54 32 1,216 1.1/4” 32 1,260 1.1/4” FJH12B-16-16 25 1” 16 1.5/16” - 12 35 1,38 16 0,63 32 1,216 1.1/4” 38 1,496 1.1/2” FJH12B-20-20 31 1.1/4” 20 1.5/8” - 12 49,6 1,95 16 0,63 41 1,614 1.5/8” 50 1,969 2” FJH12B-24-24 38 1.1/2” 24 1.7/8” - 12 56,9 2,24 18,5 0,73 50 1,969 2” 55 2,165 2.3/16” FJH12B-32-32 51 2” 32 2.1/2” - 12 74 2,91 24 0,94 65 2,559 2.9/16” 75 2,953 [in] B Series Catalogue_Rev02.2007.xls [in] © Intertraco (Italia) S.p.A. All rights are reserved - 75 Pagina 1 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES FJ41B JIC JIC 37° FEMALE SWIVEL - 45° ELBOW A FEMMINA JIC 45° SV. 37° DKJ 45° - 37° KONUS CH T D HEMBRA GIRATORIA A 45° JIC 37° B FJ41B Ø HOSEJIC Ø TUBO Ø SCHLAUCH HOSE BORE Ø MANGUERA CODE CODICE BEST.-NR CODICE CODIGO DN INCH SIZE FJ41B-03-04 5 3/16" 03 5 3/16" FJ41B-03-04 FJ46B-03-04 DN SIZE T A A T 7/16" - 20 32,2 [in] [in] 1,27 [mm] [mm] 8,5 D D CH [in] [mm] [in] [mm] [in] 0,33 15,4 0,61 15 0,5906 0,33 15,4 [in] [in] [mm] [in] inin [in] 5/8" 65 FJ46B-04-04 FJ41B-04-04 66 1/4" 1/4” 0404 7/16" - 20 - 20 7/16” 42 49,5 1,65 1,95 8,5 8,5 0,33 0,33 15 15 0,59 9/16" 0,59 14,29150,5906 0,591 FJ41B-04-05 FJ46B-04-04 66 1/4" 1/4” 0404 1/2" - 20 - 20 7/16” 41,5 1,95 1,63 49,5 9,5 8,5 0,37 0,33 15 15 0,59 0,6693 11/16" 9/16” 0,59 1714,29 0,563 FJ41B-04-05 6 1/4" 04 1/2" - 20 9,5 0,37 15 0,59 17 FJ43B-04-06 6 1/4" 04 9/16" - 18 9,5 0,37 14,5 0,57 19 FJ47B-04-06 6 1/4" 04 9/16" - 18 9,5 0,37 14,5 0,57 8 5/16" 05 88 5/16” 0505 5/16" FJ46B-05-06 FJ41B-05-06 88 FJ46B-06-04 FJ46B-05-06 10 8 FJ43B-04-06 FJ47B-04-06 FJ41B-05-05 FJ41B-05-05 FJ41B-05-06 FJ41B-06-05 FJ46B-06-04 6 6 10 1/4” 32,2 1,27 32,2 1,27 8,5 8,5 7/16” 7/16" - 20 - 20 32,2 42 1,27 1,65 8,5 8,5 0,33 0,33 15,4 0,61 0,61 14,29150,5906 0,591 5/8” 9/16" 15,4 0,61 1514,29 0,563 15 0,59 0,5906 5/8" 9/16” 1,63 0,748 3/4" 10,5 9/16» - 18 34,5 1,36 9,5 1/2" - 20 9/16” - 18 34,5 1,36 42,5 1,67 10,5 0,41 1/2” 9/16" - 18- 20 42,5 42,5 1,67 1,67 10,5 9,5 0,41 0,37 0,57 1717,46 0,687 11/16” 0,6693 11/16" 18,3 0,45 0,72 19 17 0,7480,669 11,5 3/4" 11/16” 5/16" 5/16” 0505 9/16" - 18 - 18 9/16” 42,5 1,67 1,67 42,5 9,5 9,5 0,37 0,37 11,5 11,5 3/8" 5/16” 0605 7/16" - 20 - 18 9/16” 45 42,5 1,77 1,67 8,5 9,5 0,33 0,37 16 11,5 7/16” - 20 45 1,77 8,5 1/2” - 20 46 1,81 10,5 1/4” 3/8” 04 04 06 34,5 FJ41B-06-06 10 3/8" 06 9/16" - 18 FJ46B-06-06 10 3/8" 06 9/16" - 18 9/16” 3/4" - 16 - 18 44,5 44 FJ46B-06-06 FJ47B-06-08 10 10 3/8” 3/8" 0606 9/16” 3/4" - 16 - 18 44,5 44 FJ43B-06-10 FJ43B-06-08 10 10 3/8" 3/8” 0606 FJ41B-08-08 FJ47B-06-08 12 10 1/2" FJ46B-08-08 12 1/2" FJ43B-08-10 12 FJ42B-08-12 0,37 0,33 14,5 14,5 16 0,57 19 0,669 11/16” 0,748 3/4” 17,46 0,6874 11/16" 0,45 11/16" 3/4” 0,45 17,4619 0,7480,748 0,63 0,5626 9/16" 11/16” 0,45 14,29 17,46 0,687 0,63 14,29 0,563 9/16” 17 0,669 11/16” 0,37 11,5 0,45 19 1,75 1,73 9,5 9,5 10,6 0,37 11,5 0,45 17,46 1,75 1,73 9,5 10,6 0,37 0,42 11,5 14,5 0,45 22,22 17,46 0,687 0,57 0,8748 7/8" 11/16” 7/8"3/4” - 14 - 16 50,5 1,94 1,99 49,4 12,5 10,7 0,49 0,42 19,5 15 0,77 1.1/16"15/16” 0,59 27 24 1,0630,945 08 3/4" - 16 43,2 1,70 49,4 1,94 10,7 10,7 0,42 0,42 13,8 15 0,54 08 3/4" - 16 10,7 0,42 13,8 0,54 1/2" 08 7/8" - 14 12,5 0,49 19 0,75 12 1/2" 08 1.1/16" - 12 FJ46B-08-08 FJ41B-10-10 12 16 1/2” 5/8" 1008 FJ43B-08-10 FJ42B-10-12 12 16 FJ42B-12-12 19 FJ42B-12-16 FJ41B-06-06 FJ43B-06-08 FJ43B-06-10 10 10 10 3/8” 3/8" 3/8” 0606 06 43,2 1,75 1,70 0,41 0,37 0,42 11,5 14,5 0,748 11/16" 0,45 24 190,94490,748 0,57 15/16" 3/4” 0,9449 15/16" 0,59 2422,22 0,875 7/8” 1,70 10,7 13,8 0,54 7/8"3/4” - 14 - 16 43,2 62,5 1,70 2,46 10,7 12,7 0,42 0,50 1/2” 5/8" 7/8” - 14 1008 1.1/16" - 12 55,5 60,5 2,19 2,38 12,5 13,8 0,49 0,54 3/4" 12 1.1/16" - 12 70 2,76 13,8 0,54 28,3 1,11 32 1,2598 1.1/4" 19 3/4" 12 1.5/16" - 12 71,6 2,82 16 0,63 30 1,18 38 1,4961 1.1/2" FJ42B-16-16 25 1" 16 1.5/16" - 12 83,5 3,29 16 0,63 32 1,26 38 1,4961 1.1/2" FJ42B-20-16 31 3,74 16 0,63 32 1,26 38 1,4961 1.1/2" 13,8 0,54 27 32 27 7/8" 43,2 0,42 0,77 22,22 0,9449 3/4” - 16 08 2,19 19,5 0,63 12,5 55,5 0,49 16 1,99 1/2” 06 3/4” - 16 44,5 3/4" 50,5 12 3/8” 06 0,748 7/8” - 14 FJ41B-08-08 10 3/8” 1,75 9,5 0,37 17 9,5 FJ41B-06-05 44,5 1,36 0,59 11/16" 1,63 1,36 15 0,6693 41,5 34,5 0,41 5/8” 1/2” - 20 1/4” 04 7/16" - 20 41,5 0,33 [mm] CH FJ46B-03-04 FJ41B-04-04 6 7/16” - 20 [mm] [mm] B B 3/16” 0303 3/16” 0403 1/4" FJ41B-04-05 5 INCH 37° FEMALE SWIVEL - 45° ELBOW 1,063 1.1/16” 0,945 15/16” 1,063 1.1/16" 1,2598 1.1/4" 24 13,8 24 0,54 2722,22 0,94 1,0630,875 1.1/16" 7/8” 19 29 0,75 32 271,25981,063 1,14 1.1/4" 1.1/16” 76 FJ42B-16-20 - © Intertraco (Italia) S.p.A. All rights are reserved 1.1/4" 20 1.5/16" - 12 95 ➔ B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES CODE CODICE BEST.-NR CODIGO Ø HOSE Ø TUBO Ø SCHLAUCH Ø MANGUERA A T SIZE FJ42B-08-12 12 1/2” 08 FJ41B-10-10 16 5/8” 10 FJ42B-10-12 16 5/8” 10 FJ42B-12-12 19 3/4” FJ42B-12-16 19 FJ42B-16-16 CH [mm] [in] [mm] [in] [mm] [in] [mm] [in] 1.1/16” - 12 59 2,32 13,8 0,54 26 1,02 32 1,260 1.1/4” 7/8” - 14 64,1 2,52 12,7 0,50 26,9 1,06 27 1,063 1.1/16” 1.1/16” - 12 CH66 2,60 13,8 0,54 27,4 1,08 32 1,260 1.1/4” 12 1.1/16” - 12 70 2,76 13,8 0,54 28,3 1,11 32 1,260 1.1/4” 3/4” 12 1.5/16” - 12 71,6 2,82 16 0,63 30 1,18 38 1,496 1.1/2” 25 1” 16 1.5/16” - 12 83,5 3,29 16 0,63 32 1,26 38 1,496 1.1/2” FJ42B-20-16 31 1.1/4” 20 1.5/16” - 12 95 3,74 16 0,63 32 1,26 38 1,496 1.1/2” FJ42B-20-20 31 1.1/4” 20 1.5/8” - 12 97,5 3,84 16 0,63 36,3 1,43 50 1,969 2” FJ42B-24-24 38 1.1/2” 24 1.7/8” - 12 119 4,69 18,5 0,73 49,2 1,94 55 2,165 2.3/16” FJ42B-32-32 FJ41B 51 2” 2,71 75 2,953 A D INCH D [in] T DN B B CODICE JIC 37° FEMALE SWIVEL - 45° ELBOW 32 2.1/2” - 12 152,6 6,01 24 0,94 68,8 HOSE BORE DN INCH T SIZE A [mm] B [in] [mm] D [in] [mm] CH [in] [mm] [in] inin Nut type FJ41 FJ42 FJ43 FJ46 (IMPERIAL NUT) FJ47 (IMPERIAL NUT) NUT TYPE TIPO DI DADO HUTTER TYP TIPO DE TUERCA © Intertraco (Italia) S.p.A. All rights are reserved - 77 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES JIC FJ91B JIC 37° FEMALE SWIVEL - 90° ELBOW A B D FEMMINA JIC 90° SV. 37° DKJ 90° - 37° KONUS HEMBRA GIRATORIA A 90° JIC 37° T FJ91B CODE CODICE BEST.-NR CODIGO CODICE CH Ø HOSE - 90° ELBOW Ø TUBOJIC 37° FEMALE SWIVEL A B D Ø SCHLAUCH T Ø MANGUERA HOSE BORE A B D T DN INCH INCH SIZE SIZE [mm] [mm] [in] [mm] [mm] [in] [in] [mm] [in] [in] [mm] [in] DN CH CH [mm][in] [mm] [in] inin [in] FJ91B-03-04 FJ91B-03-04 55 3/16" 3/16” 0303 7/16" - 20 - 20 7/16” 2424 0,94 0,94 8,5 8,5 0,33 0,33 29 29 1,14 5/8" 1,14 15 150,59060,591 FJ96B-03-04 FJ96B-03-04 55 3/16" 3/16” 0303 2424 0,94 0,94 8,5 8,5 0,33 0,33 29 29 FJ91B-04-04 6 1/4" 04 7/16" - 20 - 20 7/16” 7/16" - 20 8,5 0,33 30 1,14 0,5626 9/16" 9/16” 1,14 14,29 14,29 0,563 1,18 15 0,5906 5/8" FJ96B-04-04 6 1/4" 04 7/16" - 20 8,5 0,33 30 1,18 FJ91B-04-05 6 1/4" 04 1/2" - 20 FJ91B-04-05 FJ96B-04-05 66 1/4” 1/4" 0404 FJ96B-04-05 FJ93B-04-06 66 1/4” 1/4" FJ97B-04-06 FJ93B-04-06 66 1/4" 1/4” FJ91B-04-04 FJ96B-04-04 6 6 FJ91B-05-05 FJ97B-04-06 6 FJ91B-05-06 8 FJ91B-05-05 FJ96B-05-06 8 FJ91B-05-06 8 FJ96B-05-06 FJ91B-06-06 8 10 FJ91B-06-05 1/4” 1/4” 1/4” 5/16" 5/16” 04 32 1,26 8,5 7/16” - 20 32 1,26 8,5 9,5 0,37 30 1,18 1/2"1/2” - 20 - 20 2932 1,14 1,26 10,5 9,5 0,41 0,37 30 27 1,18 17,46170,68740,669 1,06 11/16" 11/16” 0404 1/2” 9/16" - 18- 20 29 27,5 1,14 1,08 1,05 9,5 0,41 0,37 30 27,5 1,18 1917,46 1,08 0,7480,687 3/4" 11/16” 0404 9/16" - 18 - 18 9/16” 27,5 1,08 1,08 27,5 9,5 9,5 0,37 0,37 27,5 11/16" 3/4” 27,5 1,08 1,08 17,46190,68740,748 27,5 1,08 9,5 0,37 27,5 30 1,18 9,5 0,37 22 04 04 05 0,33 30 05 9/16” - 18 30 1,18 9,5 0,37 22 5/16” 0605 3/8" 9/16” 9/16" - 18 - 18 3031 1,18 1,22 9,5 9,5 0,37 0,37 22 22 3/8” 06 0606 FJ97B-06-08 FJ96B-06-06 10 10 3/8" FJ93B-06-10 10 3/8" 3/8” 0606 3/8” 3/8” 06 06 06 1/2” - 20 0,41 30 10,5 3/8" 3/8” 10 1,14 0,33 1,26 10 FJ97B-06-08 29 1,26 32 10 10 10 9/16” - 18 9/16" - 18 32 1/2” - 20 5/16” 05 FJ93B-06-08 FJ91B-06-06 FJ91B-08-06 1,26 7/16” - 20 FJ91B-06-05 FJ96B-06-06 FJ93B-06-08 32 33 1,18 5/8” 1,18 1,08 0,87 1,30 15 0,591 5/8” 14,29 0,563 9/16” 14,29 0,5626 17 0,6693 17,46 19 0,87 17 11/16" 0,687 0,748 19 9/16" 3/4" 11/16” 0,669 11/16” 0,748 3/4” 0,87 1917,46 0,87 0,7480,687 3/4" 11/16” 31 1,22 10,5 0,41 33 3/4" - 16 - 18 9/16” 31,5 31 1,24 1,22 10,6 9,5 0,42 0,37 30 22 1,18 15/16" 3/4” 0,87 24 190,94490,748 3/4" - 16 31,5 31 1,24 1,22 10,6 9,5 0,42 0,37 30 1,18 12,5 0,49 38 1,50 9/16” - 18 7/8" - 14 37,1 1,46 0,42 22 31,5 1,24 10,7 3/4” - 16 31,5 1,24 10,7 9,5 0,37 22 0,87 30 17 0,669 11/16” 0,8748 7/8" 0,87 22,22 17,46 0,687 11/16” 3/4” - 16 0,42 30 1,30 1,18 1,18 27 24 1,063 22,22 1.1/16" 0,945 15/16” 0,875 7/8” FJ96B-08-06 12 1/2" 08 FJ93B-06-10 FJ91B-08-08 10 12 3/8” 1/2" 0806 3/4"7/8” - 16 - 14 37,1 41 1,46 1,61 12,5 10,7 0,49 0,42 38 30 1,50 24 270,94491,063 1,18 15/16" 1.1/16” FJ91B-08-06 FJ96B-08-08 12 12 1/2” 1/2" 0808 9/16” 3/4" - 16 - 18 35,5 41 1,40 1,61 9,5 10,7 0,37 0,42 22 30 0,87 22,22190,87480,748 1,18 7/8" FJ93B-08-10 FJ96B-08-06 12 12 1/2" 1/2” 08 08 7/8" - 14 - 18 9/16” 42,5 35,5 1,67 1,40 12,5 9,5 0,49 0,37 40 22 1,57 1,0630,687 1.1/16" 11/16” 0,87 2717,46 41 3/8" - 19 35,5 1,40 FJ92B-08-12 FJ91B-08-08 12 1,61 10,7 0,42 FJ91B-10-10 16 5/8" 10 7/8" - 14 55 2,17 12,7 0,50 55 FJ92B-10-12 16 5/8" 10 1.1/16" - 12 48,5 1,91 13,8 0,54 47,5 FJ91B-12-10 19 3/4" 12 7/8" - 14 54,2 2,13 12,7 0,50 55 1/2” 08 3/4” - 16 3/4" 12 - 12 61,5 78 FJ92B-12-12 - © Intertraco19(Italia) S.p.A. All1.1/16" rights are reserved 30 17,46 0,6874 1,18 2,17 24 11/16" 0,945 27 1,063 1.1/16" 1,87 32 1,2598 1.1/4" 2,17 27 1,063 1.1/16" 2,42 13,8 0,54 58,8 2,31 32 1,2598 1.1/4" FJ92B-12-16 19 3/4" 12 1.5/16" - 12 62,5 2,46 16 0,63 61 2,40 38 1,4961 1.1/2" FJ92B-16-16 25 1" 16 1.5/16" - 12 71,5 2,81 16 0,63 71 2,80 38 1,4961 1.1/2" 3/4” 15/16” ➔ B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES A T DN INCH SIZE FJ96B-08-08 12 1/2” 08 A 3/4” - 16 FJ93B-08-10 12 1/2” 08 7/8” - 14 FJ92B-08-12 12 1/2” 08 1.1/16” - 12 FJ91B-10-10 16 5/8” 10 FJ92B-10-12 16 5/8” FJ91B-12-10 19 FJ92B-12-12 B D CH [mm] [in] [mm] [in] [mm] [in] [mm] [in] 41 1,61 10,7 0,42 30 1,18 22,22 0,875 7/8” 42,5 1,67 12,5 0,49 40 1,57 27 1,063 1.1/16” 47 1,85 13,8 0,54 50,8 2,00 32 1,260 1.1/4” 7/8” - 14 55 2,17 12,7 0,50 55 2,17 27 1,063 1.1/16” 10 1.1/16” - 12 D Ø HOSE Ø TUBO Ø SCHLAUCH Ø MANGUERA 55,5 2,19 13,8 0,54 55,8 2,20 32 1,260 1.1/4” 3/4” 12 7/8” - 14 54,2 2,13 12,7 0,50 55 2,17 27 1,063 1.1/16” 19 3/4” 12 1.1/16” - 12 B CODE CODICE BEST.-NR CODIGO 65 2,56 13,8 0,54 55 2,17 32 1,260 1.1/4” FJ92B-12-16 19 3/4” 12 1.5/16” - 12 62,5 2,46 16 0,63 61 2,40 38 1,496 1.1/2” FJ92B-16-16 25 1” 16 1.5/16” - 12 71,5 2,81 16 0,63 71 2,80 38 1,496 1.1/2” FJ92B-16-20 25 1” 16 1.5/8” - 12 79 3,11 16 0,63 79,5 3,13 50 1,969 2” FJ92B-20-20 31 FJ91B 1.1/4” 20 1.5/8” - 12 82,5 3,25 16 0,63 77 3,03 50 1,969 FJ92B-24-24 38 1.1/2” 24HOSE1.7/8” - 12 BORE 102 4,02A 18,5 0,73 B 100 D 3,94 FJ92B-32-32 51 CODICE 2” DN 32 T CH JIC 37° FEMALE SWIVEL - 90° ELBOW INCH 2.1/2”SIZE - 12 T 130,5 [mm] 5,14 [in]24 [mm]0,94 [in] [mm] 140 55 CH 2,165 [in] 5,51 [mm] 75 [in] [in] 2” 2.3/16” inin 2,953 Nut type FJ91 FJ92 FJ93 FJ96 (IMPERIAL NUT) FJ97 (IMPERIAL NUT) NUT TYPE TIPO DI DADO HUTTER TYP TIPO DE TUERCA © Intertraco (Italia) S.p.A. All rights are reserved - 79 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES JIC FJ91B-L JIC 37° FEMALE SWIVEL 90° ELBOW (LONG DROP) A FEMMINA JIC 90° SV. 37° (VERSIONE ALTA) D DKJ 90° Sonder-SL 37° KONUS B HEMBRA GIRATORIA A 90° JIC 37° ( CODO LARGO ) T FJ91B-L CODE CODICE BEST.-NR CODIGO CODICE CH Ø HOSE JIC 37° FEMALE SWIVEL - 90° ELBOW (LONG DROP) Ø TUBO Ø SCHLAUCH Ø MANGUERA HOSE BORE DN INCH INCH SIZE SIZE DN T T A B A B [mm][mm] [in] [in] [mm] [mm] [in] D [in] [mm] D CH CH [mm] [in] [in] [mm] [in] [mm] inin[in] [in] FJ91B-04-04-46 6 1/4” 04 7/16” - 20 32 1,26 8,5 0,33 46 1,81 15 0,591 5/8” FJ96B-04-04-46 6 1/4” 04 Nut 7/16” type - 20 32 1,26 8,5 0,33 46 1,81 14,29 0,563 9/16” FJ91B-04-05-46 6 1/4” 04 1/2” - 20 32 1,26 10,5 0,41 46 1,81 17 0,669 11/16” FJ96B-04-05-46 6 1/4” 04 1/2” - 20 32 1,26 9,5 0,37 46 1,81 17,46 0,687 11/16” FJ96B-04-06-56 6 1/4” 04 9/16” - 18 32 1,26 9,5 0,37 56 2,20 19 0,748 3/4” FJ96B-06-04-46 10 3/8” 06 7/16” - 20 36 1,42 8,5 0,33 46 1,81 14,29 0,563 9/16” FJ91B-06-06-33 10 3/8” 06 9/16” - 18 35,5 1,40 9,5 0,37 33 1,30 19 0,748 3/4” FJ91B-06-06-56 10 3/8” 06 9/16” - 18 35,5 1,40 9,5 0,37 56 2,20 19 0,748 3/4” FJ96B-06-06-56 10 3/8” 06 9/16” - 18 35,5 1,40 9,5 0,37 56 2,20 17,46 0,687 11/16” FJ93B-06-08-62 10 3/8” 06 3/4” - 16 37,1 1,46 10,7 0,42 62 2,44 24 0,945 15/16” FJ97B-06-08-62 10 3/8” 06 3/4” - 16 37,1 1,46 10,7 0,42 62 2,44 22,22 0,875 7/8” FJ91B-08-08-62 12 1/2” 08 3/4” - 16 47,5 1,87 10,7 0,42 62 2,44 24 0,945 15/16” FJ96B-08-08-62 12 1/2” 08 3/4” - 16 47,5 1,87 10,7 0,42 62 2,44 22,22 0,875 7/8” FJ93B-08-10-65 12 1/2” 08 7/8” - 14 49,5 1,95 12,5 0,49 65 2,56 27 1,063 1.1/16” FJ92B-08-12-95 12 1/2” 08 1.1/16” - 12 49 1,93 13,8 0,54 95 3,74 32 1,260 1.1/4” FJ91B-10-10-65 16 5/8” 10 7/8” - 14 55,5 2,19 12,7 0,50 65 2,56 27 1,063 1.1/16” FJ92B-10-12-95 16 5/8” 10 1.1/16” - 12 55,5 2,19 13,8 0,54 95 3,74 32 1,260 1.1/4” FJ92B-12-12-95 19 3/4” 12 1.1/16” - 12 61,5 2,42 13,8 0,54 95 3,74 32 1,260 1.1/4” FJ92B-16-16-110 25 1” 16 1.5/16” - 12 79,5 3,13 16 0,63 110 4,33 38 1,496 1.1/2” FJ91 FJ92 FJ93 FJ96 (IMPERIAL NUT) FJ97 (IMPERIAL NUT) ➔ 80 - © Intertraco (Italia) S.p.A. All rights are reserved B D B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIEAUNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES T JIC 37° FEMALE SWIVEL - 90° ELBOW (LONG DROP) FJ91B-L CODICE CH HOSE BORE DN INCH T SIZE A [mm] B [in] [mm] D [in] [mm] CH [in] [mm] [in] inin Nut type FJ91 FJ92 FJ93 FJ96 (IMPERIAL NUT) FJ97 (IMPERIAL NUT) NUT TYPE TIPO DI DADO HUTTER TYP TIPO DE TUERCA B Series Catalogue_Rev02.2007.xls Pagina 1 di 1 The document is exclusive property of INTERTRACO S.p.A.. All rights are reserved. © Intertraco (Italia) S.p.A. All rights are reserved - 81 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES KJ91B JIC JIC 37° FEMALE SWIVEL - 90° ELBOW (COMPACT FORGED) A FEMMINA JIC COMPATTA 90° SV. 37° D DKJ JIC- Dichtkopf Kompakt 90° UNF-Gewinde 37° KONUS B HEMBRA GIRATORIA a 90° COMPACTA JIC 37° CH T KJ91B CODE CODICE CODICE BEST.-NR KJ91B-04-04 CODIGO KJ96B-04-04 KJ91B-04-06 KJ91B-04-04 JIC 37° FEMALE SWIVEL - 90° ELBOW (COMPACT FORGED) Ø HOSE HOSE Ø BORE TUBO SCHLAUCH DN Ø INCH SIZE Ø MANGUERA 6 6 6 1/4" 1/4” 04 6 1/4" 6 KJ91B-06-06 10 KJ96B-06-06 10 KJ91B-04-06 04 DN KJ96B-04-06 KJ96B-04-04 1/4" 6 6 3/8" 3/8" 04 1/4” 06 1/4” 06 10 KJ96B-06-08 KJ91B-06-06 10 10 3/8" 3/8” 06 12 KJ96B-08-08 12 KJ96B-06-06 KJ91B-06-08 KJ91B-08-10 10 KJ91B-10-12 KJ91B-12-12 KJ96B-08-08 KJ91B-16-16 1/2" 08 3/8” 08 12 10 1/2" 3/8” 08 KJ91B-10-10 KJ96B-06-08 KJ91B-08-08 10 3/8" 1/4” 06 1/2" 19 25 12 12 3/4" 1" T [mm] 7/16" - 20 17,5 INCH04 SIZE 7/16" - 20 KJ96B-04-06 KJ91B-06-08 KJ91B-08-08 6 1/4" A T 17,5 A 0,69 [mm] 0,69 B [mm] [in] 8,5 [in] 8,5 9/16" - 18 0,69 0,69 8,5 04 7/16” - 20 17,5 17,5 D B D CH [mm] [in] [mm] [in] inin 0,33 20,5 0,81 14 0,5512 9/16" 0,33 20,5 0,748 0,81 [mm] [in] 0,81[mm] [in] [mm] 14,29 0,5626 9/16" 0,33 8,5 25,5 0,33 1,0020,519 0,69 8,5 0,69 0,33 25,5 1,00 0,85 8,5 0,33 25,5 1,00 8,5 0,33 25,5 1,00 043/4" - 169/16” - 18 21,5 17,5 0,85 0,69 10,5 8,5 0,41 0,33 1,0425,524 26,5 063/4" - 169/16” 10,5 0,85 0,41 8,5 26,5 22,22 1,00 0,8748 0,33 1,0425,5 9,5 0,37 29,5 1,16 9,5 0,37 29,5 1,16 9/16" - 18 17,5 9/16" - 18 21,5 9/16" - 18 21,5 04 04 7/16” - 20 9/16” - 18 17,5 17,5 0,85 18 21,5 0,85 21,5 3/4" - 16 25,5 1,00 3/4" - 16 25,5 06 - 9/16” - 18 067/8" - 14 3/4” - 16 3/8» 06 3/4» - 16 1/2» 08 3/4» - 16 1/2»16 08 3/4» - 16 1.5/16" - 12 12 [in] 1.1/16" - 12 25,5 26,5 30,5 0,69 21,5 0,85 21,5 1,00 0,85 13 21,5 0,85 25,5 1,00 25,5 1,20 1,00 14,5 1,00 1,04 14,5 8,5 8,5 8,5 10,5 0,51 10,5 9,5 0,33 0,33 0,33 20,5 19 25,5 0,41 0,37 30,5 0,57 33,5 0,81 0,748 1,00 17,46 0,6874 24 25,5 0,9449 [in] [in] 3/4" 17 0,669 11/16” 11/16" 0,563 9/16” 0,748 3/4” 0,687 11/16” 0,748 3/4” 14,29 3/4" 19 11/16" 1,00 0,9449 17,46 15/16" 7/8" 19 15/16" 1,00 17,46 0,687 11/16” 1,04 1,063 24 1.1/16" 0,945 15/16” 26,5 1,04 22,22 0,875 7/8” 29,5 1,16 24 0,945 15/16” 22,22 0,8748 280,41 1,1026,527 0,57 9,5 17,46 0,6874 CH 1,20 32 7/8" 0,37 1,3229,538 1,2598 1.1/4" 1,16 22,22 1,4961 1.1/2" 0,875 7/8” KJ91B-08-10 12 1/2» 08 7/8» - 14 25,5 1,00 13 0,51 28 1,10 27 1,063 1.1/16” KJ91B-10-10 16 5/8» 10 7/8» - 14 25,5 1,00 13 0,51 28 1,10 27 1,063 1.1/16” KJ91B-10-12 16 5/8» 10 1.1/16» - 12 25,5 1,00 14,5 0,57 28 1,10 32 1,260 1.1/4” KJ91B-12-12 19 3/4» 12 1.1/16» - 12 26,5 1,04 14,5 0,57 30,5 1,20 32 1,260 1.1/4” KJ91B-16-16 25 1» 16 1.5/16» - 12 30,5 1,20 14,5 0,57 33,5 1,32 38 1,496 1.1/2” B Series Catalogue_Rev00.2007.xls 82 - © Intertraco S.p.A. All rights are reserved The(Italia) document is exclusive property of INTERTRACO S.p.A.. All rights are reserved. Pagina 47 di 85 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES OM10B ORFS ORFS MALE B ES MASCHIO ORFS T ORFS- Armatur Aussengewinde MACHO FIJO ORFS A OM10B CODICE CODE ORFS MALE HOSE BORE Ø HOSE CODICE OM10B-04-04 BEST.-NR CODIGO OM10B-04-06 DN OM10B-06-06 10 6 6 INCH Ø TUBO SIZE A T [mm] Ø SCHLAUCH 1/4" 04 9/16" - 18 Ø MANGUERA 1/4" DN 3/8" T 24,3 26,7 1,05 11/16" - 16 04- 16 13/16" 26,7 1,05 9/16” 29,1- 181,15 24,3 12,8 29,6- 16 1,17 26,7 12,8 11/16” SIZE OM10B-08-08 OM10B-04-06 12 61/2" 08 1/4” 13/16" 04- 16 1/2" 08 1" - 14 08 1.3/16" - 12 12 OM10B-10-10 OM10B-06-06 10 3/8” 16 10 5/8" 3/8” 10 OM10B-08-08 16 OM10B-10-12 12 5/8" OM10B-12-12 OM10B-08-10 19 3/4" 3/4" OM10B-06-08 OM10B-12-16 19 OM10B-16-16 25 OM10B-08-12 1/2" 12 9,8 11/16" - 16 1/4” 06 OM10B-08-12 0,96 06 63/8" 12 [mm] 04 INCH OM10B-04-04 10 OM10B-06-08 OM10B-08-10 B [in] 34 1,34 37,1 1,46 ES A [in] 0,39 [mm] [in] 15 0,59 11,2 0,44 19 11,2 0,44 19 [mm] [in] B 5/8" 0,75 3/4" 0,75 3/4" [mm] 0,96 22 0,50 9,8 0,87 0,50 1,05 22 0,87 11,2 ES inin [in] [mm] [in] 0,39 7/8" 15 0,591 5/8” 7/8" 0,44 19 0,748 3/4” 0,44 19 0,748 3/4” 15,5 0,61 27 17 0,67 32 0,61 27 12,8 1,06 1.1/16" 0,50 22 0,866 7/8” 1,17 32 0,67 12,8 1,26 1,26 1.1/4" 11/16” - 16 1" - 14 06 13/16” - 161,24 29,1 31,4 15,5 1/2” 10 08- 12 1.3/16" 13/16” 37,1- 16 1,46 29,6 17 0,50 1.1/4" 22 0,866 7/8” 12 1/2” 1.3/16" - 12 37,6 1” - 14 1,48 17 34 0,67 32 1,26 15,5 1.1/4" 27 1,063 1.1/16” 12 1.7/16" - 12 40 1,57 17,5 0,69 41 1,61 1.5/8" 16 1.7/16" - 12 41 1,61 17,5 0,69 41 1,61 1.5/8" 0,67 32 1,260 1.1/4” 12 1/2” OM10B-10-10 16 OM10B-10-12 1,05 1.1/16" 06 08 26,7 1,06 [in] 1,15 1,34 1.3/16” - 12 37,1 5/8” 10 1” - 14 34,1 1,24 15,5 0,61 27 1,063 1.1/16” 16 5/8” 10 1.3/16” - 12 37,1 1,46 17 0,67 32 1,260 1.1/4” OM10B-12-12 19 3/4” 12 1.3/16” - 12 37,6 1,48 17 0,67 32 1,260 1.1/4” OM10B-12-16 19 3/4” 12 1.7/16” - 12 40 1,57 17,5 0,69 41 1,614 1.5/8” OM10B-16-16 25 1” 16 1.7/16” - 12 41 1,61 17,5 0,69 41 1,614 1.5/8” B Series Catalogue_Rev00.2007.xls 17 0,61 08 1" 1,46 11,2 Pagina 48 di 85 The document is exclusive property of INTERTRACO S.p.A.. All rights are reserved. © Intertraco (Italia) S.p.A. All rights are reserved - 83 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES OR13B ORFS ES ORFS FEMALE SWIVEL CH FEMMINA ORFS DIRITTA T ORFS- Armatur Innengewinde HEMBRA GIRATORIA RECTA ORFS A B OR13B CODE CODICE CODICE BEST.-NR CODIGO OR13B-04-04 OR13B-04-06 OR13B-04-04 ORFS FEMALE SWIVEL Ø HOSE HOSE Ø TUBOBORE ØDNSCHLAUCH INCH SIZE Ø MANGUERA 6 1/4" 6 1/4" DN INCH 04 9/16" - 18 04 11/16" - 16 SIZE [in] 31,5 B B ES ES [mm] [in] [mm] 8 0,31 14 0,55 1,24 9,5 0,37 17 0,67 0,37 17 0,67 1,08 [mm] 19 [mm] 11/16" 0,75 3/4" 0,87 7/8" [in] [in] 0,87 7/8" 0,37 17 8 0,31 0,6690,6711/16” 17 11/16" 22 19 0,866 0,75 7/8” 3/4" OR13B-05-06 11/16"- -16 16 OR13B-06-06 8 105/16”3/8" 05 06 11/16” 32 1,26 32 9,5 1,26 0,37 9,5 0,6690,6711/16” 17 11/16" 22 22 0,866 0,87 7/8” 7/8" 30,5 36,5 1,20 1,44 8 11 0,43 0,31 17 19 3/4" 0,6690,7511/16” 32 31,5 1,26 1,24 9,5 9,5 0,37 0,37 17 19 35 1,38 11 0,43 19 0,75 39 1,54 13,5 0,53 24 0,94 1,18 OR13B-08-08 12 1/2" OR13B-08-10 12 1/2" OR13B-08-12 12 1/2" OR13B-06-08 10 3/4" 0,57 30 1,42 1.7/16" OR13B-08-08 16 1" - -14 OR13B-10-10 12 161/2” 5/8" 08 10 13/16” 35 1,38 39 11 1,54 0,43 13,5 19 0,53 0,7480,94 3/4” 24 15/16" 24 30 0,945 1,18 15/16” 1.3/16" OR13B-08-10 OR13B-10-12 12 161/2” 5/8" 08 10 39 1,54 44 13,5 1,73 0,53 14,5 24 0,57 0,9451,1815/16” 30 1.3/16" 30 36 1,181 1,42 1.3/16” 1.7/16" 44 42 1,73 1,65 14,5 13,5 0,57 0,53 30 27 1.1/16" 36 30 1,417 1,18 1.7/16” 1.3/16" 1,1811,06 1.3/16” 39 1,54 43,5 1,71 14,5 0,57 30 1,18 1.3/16" 1.3/16” - 12 44 1,73 51,5 2,03 14,8 0,58 36 1,42 1.7/16" 1” - 14 42 52,5 1,65 2,07 14,8 0,58 36 1,42 1.7/16" 0,58 41 1,61 1.5/8" 1” - 14- 12 1.3/16" OR13B-12-12 19 3/4" OR13B-12-16 19 3/4" OR13B-16-16 25 1" OR12B-16-20 25 1" OR13B-10-10 16 OR13B-10-12 16 OR13B-12-10 19 5/8” 5/8” 3/4” 10 10 12 12 12 16 1.7/16" - 12 1.7/16" - 12 14,5 13,5 0,53 0,57 0,53 24 30 27 1.3/16" 0,945 15/16” 30 1,181 1.3/16” 36 1,063 1.1/16” 30 30 36 36 41 41 0,866 7/8” 1,42 1.7/16" 1,61 1.5/8" 1,61 1.5/8" 1,97 2" 1,181 1.3/16” 1,417 1.7/16” 1,181 1.3/16” 54,5 2,15 14,8 14,5 2,20 0,57 0,58 30 14,8 1,1811,611.3/16” 41 1.5/8" 36 50 1,417 1,97 1.7/16” 2" 1.11/16" - 12 51,5 OR16B-20-20 19 313/4”1.1/4" 12 20 1.7/16” OR13B-12-16 - 12 56 2,03 2,20 14,8 14,8 0,58 0,58 36 41 1.5/8" 41 47,63 1,614 1,88 1,4171,611.7/16” 1.7/8" 1.5/8” 2" - -1212 OR12B-24-24 25 38 1” 1.1/2" 16 24 1.7/16” OR13B-16-16 52,5 61,2 2,07 2,41 14,8 14,8 0,58 0,58 36 50 2" 1,4171,971.7/16” 2.3/8" 1.5/8” 16 50 0,945 15/16” 1,76 56 1” 1.11/16" - 12 13,5 22 15/16" OR13B-12-12 - 12 1.11/16" - 12 44,6 OR12B-20-20 19 313/4”1.1/4" 12 20 1.3/16” OR12B-16-20 25 16 1.3/16" - 12 1” - 14 3/4” 1.3/16" 14,5 1" - -1412 OR13B-12-10 12 191/2” 3/4" 08 12 1.3/16” OR13B-08-12 0,748 1,18 1,73 1.3/16" - 12 24 15/16" 44 08 19 3/4” 7/8" 7/8” 0,94 1,24 0,37 0,748 24 31,5 9,5 19 3/4" 0,87 0,6690,7511/16” 22 22 0,866 11/16” - 16 08 1" - 14 0,43 0,94 11/16” 15/16" 17 24 0,669 1,44 08 11 0,669 11/16” 36,5 1/2” 06 13/16" - 16 22 13/16” - 16 OR13B-08-06 12 3/8” 08 11/16" 17 inin 9,5 1,20 11/16" - 16 OR13B-08-06 OR13B-06-06 10 123/8” 1/2" 06 08 11/16” - 16 9/16” 22 [in] 1,24 30,5 17 0,37 0,551 9/16" [in] CH CH 31,5 13/16" - 16 9/16” - 18 14 [in] [mm] OR13B-04-06 9/16"-- 16 18 OR13B-06-04 6 101/4” 3/8" 04 06 11/16” OR13B-06-08 10 103/8” 3/8" 06 06 OR13B-06-04 0,31 [mm] inin 9,5 11/16" - 16 8 [in] [in] 1,26 05 9/16” - 18 27,5 [in] 32 5/16" 04 [mm] A [mm] 1,10 8 1/4” A T 28 OR13B-05-06 6 T 2,36 4160 1,614 1.11/16” - 12 54,5 2,15 14,8 0,58 41 1,614 1.5/8” 50 1,969 2” -OR16 20 OR12B-20-20 31OR12 1.1/4” 1.11/16” - 12 OR13 56 2,20 14,8 0,58 41 1,614 1.5/8” 50 1,969 2” OR16B-20-20 31 1.1/4” 20 1.11/16” - 12 56 2,20 14,8 0,58 41 1,614 1.5/8” 47,63 1,874 1.7/8” OR12B-24-24 38 1.1/2” 24 2” - 12 61,2 2,41 14,8 0,58 50 1,969 2” 60 2,362 2.3/8” ➔ 84 - © Intertraco (Italia) S.p.A. All rights are reserved B Series Catalogue_Rev00.2007.xls Pagina 49 di 85 ES T B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES CH C ORFS FEMALE SWIVEL OR13B CODICE B HOSE BORE DN INCH SIZE T A [mm] B [in] [mm] ES [in] [mm] [in] CH inin [mm] [in] inin Nut type OR13 OR12 NUT TYPE TIPO DI DADO HUTTER TYP TIPO DE TUERCA B Series Catalogue_Rev02.2007.xls Pagina 1 di 1 The document is exclusive property of INTERTRACO S.p.A.. All rights are reserved. © Intertraco (Italia) S.p.A. All rights are reserved - 85 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES OR43B ORFS ORFS FEMALE SWIVEL - 45° ELBOW A FEMMINA ORFS 45° CH ORfS - Armatur 45° T D HEMBRA GIRATORIA a 45° ORFS B OR43B Ø HOSEORFS Ø TUBO Ø SCHLAUCH HOSE BORE Ø MANGUERA CODE CODICE BEST.-NR CODICE CODIGO DN INCH SIZE OR43B-04-04 6 1/4" 04 6 1/4" 04 OR43B-04-06 OR43B-05-06 86 1/4” 5/16" OR43B-06-06 OR43B-05-06 10 8 3/8" 5/16” 0605 OR43B-06-08 OR43B-06-06 10 10 3/8" 3/8” OR43B-04-04 OR43B-04-06 OR43B-08-06 OR43B-06-08 DN 6 10 INCH 1/4” 3/8” SIZE FEMALE SWIVEL - 45° ELBOW T 06 [mm] [in] [mm] [in] 1,71 1,50 11 0,43 19 0,748 11 0,43 15 1,50 1,54 11 9,5 0,43 0,37 1515 0,43 22 170,86610,669 11/16” 7/8" 0,59 22 220,86610,866 0,59 7/8" 7/8” 11/16" - 16 - 16 11/16” 47,5 1,50 1,87 38 9,5 9,5 0,37 0,37 1515 0,59 7/8" 0,59 22 220,86610,866 13/16" - 16 - 16 11/16” 43,5 1,87 1,71 47,5 11 9,5 0,43 0,37 1514 0,59 15/16" 7/8” 0,55 24 220,94490,866 2,22 13/16” - 16 1" -1” 14- 14 08 1" - 14 OR43B-08-10 OR43B-10-10 12 16 1/2” 5/8" 1008 OR43B-10-12 OR43B-10-10 16 16 5/8" 5/8” 1010 1.3/16" 1”- -1214 OR43B-12-10 OR43B-10-12 16 OR43B-12-12 19 3/4" 12 1.3/16" - 12 OR43B-12-16 19 3/4" 12 1.7/16" - 12 OR43B-16-16 25 19 31 1" 3/4” 1.1/4" 16 1.7/16" - 12 OR43B-16-16 OR46B-20-20 25 31 1” 1.1/4" OR42B-24-24 OR42B-20-20 38 31 1.1/2" 1.1/4” 2420 OR43B-12-10 OR43B-12-12 OR43B-12-16 OR42B-20-20 OR46B-20-20 OR42B-24-24 19 19 31 5/8” 3/4” 3/4” 1.1/4” OR42 38 -OR46 1.1/2” 10 12 3839 56,5 1/2" 08 43,5 38 11/16” - 16 12 1/2” [mm] 1,71 2,01 OR43B-08-10 12 [in] 43,5 51 13/16" - 16 OR43B-08-08 OR43B-08-12 [mm] 13/16” - 16 08 08 CH [in] 1/2" 1/2” CH 0,31 12 12 [in] D D 8 OR43B-08-08 OR43B-08-06 [mm] B B [mm] 9/16" - 18 04 11/16" 9/16” - 18 - 16 11/16” 0504 11/16" - 16 - 16 0606 A A T 1.3/16” - 12 56,5 11 0,31 0,43 [mm] 11 15 [in] [mm] [in] inin [in] 3/4" 0,59 0,59 7/8” 24 0,945 15/16” 24 0,945 15/16” 24 0,945 15/16” 11 0,43 14 0,55 24 56,5 2,41 2,22 13,5 0,53 18,9 0,74 30 55,2 56,5 2,17 2,22 13,5 13,5 0,53 0,53 17,5 0,83 0,69 30 301,18111,181 21 1.3/16"1.3/16” 63 62,6 2,48 2,66 14,5 13,5 0,57 0,53 24 1.7/16"1.3/16” 23,6 0,94 0,93 36 301,41731,181 63 2,48 14,5 0,57 2,52 14,5 0,57 23,2 0,91 36 14,8 0,58 27,4 1,08 41 14,8 0,58 0,58 0,58 31 1,22 41 27,4 1,48 1,08 50 411,96851,6142" 37,5 61,3 63,9 2,22 8 [in] 9,5 11 0,37 0,43 14 24 0,55 0,94 36 1,417 1.7/16” 1,4173 1.7/16" 2,57 13,5 1.3/16” - 12 63,9 2,52 14,5 1.7/16” 2012 1.11/16" - 12- 12 67,5 104 2,66 4,09 14,8 14,8 1.7/16” 2016 1.11/16" - 12- 12 82,4 104 3,24 4,09 14,8 14,8 0,58 0,58 31 37,5 2" - 12 1.11/16” - 12 124,6 3,84 4,91 97,5 14,8 14,8 0,58 0,58 47,2 2.3/8" 36,3 1,86 1,43 60 502,36221,969 1.11/16” - 12 97,5 3,84 14,8 0,58 36,3 1,43 47,63 1,875 1.7/8” 2” - 12 OR43120,5 4,74 14,8 0,58 44,9 1,77 60 2,362 2.3/8” 12 20 24 82,4 3,24 0,57 23,2 0,91 1,1811 1.3/16" 65,4 2,66 23,2 0,55 15/16" 1” - 14 67,5 0,53 14 0,9449 0,91 30 1,181 1.3/16” 36 1,417 1.7/16” 1,6142 1.5/8" 1,6142 1.5/8" 1.5/8” 1,22 47,63411,87521,614 1,48 1.7/8" 1.5/8” 2” ➔ 86 - © Intertraco (Italia) S.p.A. All rights are reserved B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE A RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES T D CH B ORFS FEMALE SWIVEL - 45° ELBOW OR43B CODICE HOSE BORE DN INCH SIZE T A [mm] B [in] [mm] D [in] [mm] CH [in] [mm] [in] inin Nut type OR43 OR42 NUT TYPE TIPO DI DADO HUTTER TYP TIPO DE TUERCA B Series Catalogue_Rev02.2007.xls Pagina 1 di 1 The document is exclusive property of INTERTRACO S.p.A.. All rights are reserved. © Intertraco (Italia) S.p.A. All rights are reserved - 87 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES OR93B ORFS ORFS FEMALE SWIVEL - 90° ELBOW A FEMMINA ORFS 90° ORfS - Armatur 90° B D HEMBRA GIRATORIA a 90° ORFS T OR93B CODE CODICE BEST.-NR CODIGO CODICE CH Ø HOSE Ø TUBOORFS Ø SCHLAUCH Ø MANGUERA HOSE BORE DN INCH INCH SIZE SIZE DN FEMALE SWIVEL - 90° ELBOW T A B A [mm] [mm] [in] [in] B D CH [in] [in] D [mm] [mm] OR93B-04-04 OR93B-04-04 66 1/4" 1/4” 0404 9/16" - 18 - 18 9/16” 2929 1,14 1,14 88 0,31 0,31 25 25 0,98 3/4" 11/16” 0,98 19 17 0,7480,669 OR96B-04-04 OR96B-04-04 66 1/4" 1/4” 0404 2929 1,14 1,14 88 0,31 0,31 25 25 OR93B-04-06 12 1/2" 08 9/16" - 18 - 18 9/16” 11/16" - 16 OR93B-05-06 8 5/16" 05 11/16" - 16 OR93B-06-04 10 3/8" 06 9/16" - 18 OR93B-06-04 OR93B-06-06 10 10 3/8” 3/8" 0606 OR93B-06-06 OR93B-06-08 10 10 3/8” 3/8" OR93B-08-06 OR93B-06-08 12 10 OR93B-08-08 OR93B-08-06 OR93B-08-10 OR93B-04-06 OR93B-05-06 OR93B-08-08 OR93B-08-12 12 22 8 0,31 25 0,98 19 29,5 32,5 1,16 1,28 8 9,5 0,31 0,37 25 28 0,98 22 170,86610,669 1,10 7/8" 11/16” 32,5 33 1,28 1,30 9,5 11 0,37 0,43 28 30 1,10 24 220,94490,866 1,18 15/16" 7/8” 39,5 1,30 1,56 33 9,5 11 0,37 0,43 34 30 1,34 7/8" 15/16” 1,18 22 240,86610,945 9/16” 11/16" - 16- 18 0606 11/16” 13/16" - 16 - 16 1/2" 3/8” 0806 11/16" - 16 - 16 13/16” 12 12 1/2" 08 12 1/2" 08 12 1/2“ 08 0,37 30 1,18 0,53 40 1,57 13,5 14,5 0,53 0,57 16 OR93B-10-12 16 3/4" 12 1.3/16" - 12 OR93B-12-16 19 3/4" 12 1.7/16" - 12 OR93B-16-16 25 1" 16 1.7/16" - 12 OR92B-20-20 31 1.1/4" 20 1.11/16" - 12 OR93B-12-16 OR96B-20-20 19 31 3/4” 1.1/4" OR93B-16-16 OR92B-24-24 25 38 1” 1.1/2" OR92B-20-20 31 1” - 14 56,5 1.3/16” - 12 59,5 59,5 56,5 51 51,5 1,48 13,5 0,53 2,34 2,22 14,5 14,5 0,57 0,57 51,5 2,03 36 2,34 14,8 0,58 57,5 2,26 41 14,8 0,58 71 2,80 41 3,27 50 51,5 0,945 15/16” 30 1,181 1.3/16” 2,76 2,03 1,181 36 1,417 1,6142 1.5/8" 1,6142 1.5/8" 1,9685 2" 2,34 13,5 1.3/16” - 12 59,5 2,34 14,5 14,8 0,58 83 1.7/16” 2012 1.11/16" - 12- 12 59,5 98,5 2,34 3,88 14,8 14,8 0,58 0,58 57,5 3,27 2,26 50 411,96851,6142" 83 2416 1.7/16” 2" - 12 - 12 71,5 112,5 2,81 4,43 14,8 14,8 0,58 0,58 71 102 1.11/16” - 12 82,5 14,8 0,58 77 12 20 OR92 -OR46 (size 20) 98,5 OR93 3,88 3,25 0,57 51,5 2,03 1.3/16” 1,4173 1.7/16" 59,5 2,81 2,03 30 1” - 14 71,5 51,5 24 2,01 36 301,41731,181 2,03 1.7/16"1.3/16” 2,22 0,53 70 1,24 1,1811 1.3/16" 56 56,5 2,20 2,22 19 31,5 30 40,2 2,76 1,58 30 361,18111,417 70 1.3/16"1.7/16” OR93B-12-12 0,43 15/16" 1,34 24 220,94490,866 7/8” 0,57 0,53 1.3/16” 1" - 14 - 12 11 34 14,5 13,5 1”- -1214 1010 1.3/16" 1.1/4” 0,43 13,5 7/8” 3/4" 42,5 56,5 1,67 2,22 5/8” 5/8" 3/4” 11 9,5 1,73 0,866 0,748 22 37,6 16 16 19 1,65 1,56 44 7/8” 7/8" 0,53 OR93B-12-10 OR96B-10-10 12 42 39,5 0,866 0,8661 13,5 OR93B-10-10 OR93B-10-12 3/4” 1,06 22 1,63 1008 19 27 1,06 41,5 1/2” 5/8" 10 0,37 27 1” - 14 12 16 5/8” 1,16 0,37 1,59 OR93B-08-12 OR96B-10-10 10 29,5 1,18 40,5 08 5/8” 30 13/16” - 16 1/2“ OR93B-12-12 1,18 9,5 12 OR93B-12-10 27 30 1,34 OR93B-08-10 OR93B-10-10 0,37 34 1" - 14 [in] 0,37 11/16” - 16 - 16 08 13/16" 11/16” - 16 [in] inin 9,5 1,06 9,5 1/2” [in] [mm] [mm][in] [in] 9,5 27 1,34 05 CH 0,98 0,7480,687 3/4" 11/16” 0,98 1917,46 1,06 22 0,8661 7/8" 34 5/16” 08 [mm] [mm] 11/16” - 16 8 1/2” T 1.7/16” 30 1,181 1.3/16” 36 1,417 1.7/16” 1.5/8” 2,80 60 412,36221,614 4,02 2.3/8" 1.5/8” 3,03 50 1,969 2” OR96 (size 04, 10) ➔ 88 - © Intertraco (Italia) S.p.A. All rights are reserved B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES D A Ø HOSE Ø TUBO Ø SCHLAUCH Ø MANGUERA DN OR96B-20-20 31 OR92B-24-24 38 T INCH SIZE 1.1/4” 20 1.1/2” 24 OR93B CODICE A B B CODE CODICE BEST.-NR CODIGO T CH D [mm] [in] [mm] [in] [mm] [in] [mm] [in] 1.11/16” - 12 82,5 3,25 14,8 0,58 77 3,03 50 1,969 2” 2” - 12 105 4,13 14,8 0,58 94 3,70 60 2,362 2.3/8” ORFS FEMALE SWIVEL - 90° ELBOW HOSE BORE DN CH INCH SIZE T A [mm] B [in] [mm] D [in] [mm] [in] CH [in] [mm] [in] inin Nut type OR93 OR92 NUT TYPE TIPO DI DADO HUTTER TYP TIPO DE TUERCA © Intertraco (Italia) S.p.A. All rights are reserved - 89 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES OR93B-L ORFS A ORFS FEMALE SWIVEL - 90° ELBOW (LONG DROP) A FEMMINA ORFS 90° (VERSIONE ALTA) B B T OR93B-L CODE CODICE BEST.-NR CODIGO CODICE HEMBRA GIRATORIA a 90° ORFS (CODO LARGO) D D ORFS - Armatur 90° SONDER-SL T CH CH Ø HOSE FEMALE ORFS ORFS SWIVEL FEMALE - 90°SWIVEL ELBOW- (LONG 90° ELBOW DROP) (LONG DROP) OR93B-L Ø TUBO A B D CH Ø SCHLAUCH T Ø MANGUERA HOSE BORE HOSE BORE A B A D B CH D CODICE T T DN INCH INCH SIZE SIZE [in] [mm] [in][mm][mm] [in] [in] [mm] [mm] [in] [mm][mm] [in] [in][mm] [in] [in][mm] [mm][in][mm] [in] in [mm] DN DN INCH SIZE CH [in] [in] inin OR93B-04-04-33 OR93B-04-04-33 6 1/4” 046 1/4" - 18 04 9/16” 9/16" 29 - 181,14 29 8 1,140,31 8 33 330,31 1,30 1,30 17 19 0,748 0,669 11/16”3/4" OR93B-04-04-46 OR93B-04-04-46 6 1/4” 046 1/4" 04 9/16” - 18 9/16" - 18 46 460,31 1,81 1,81 17 19 0,748 0,669 11/16”3/4" 1/4" 04 11/16" - 16 32 3/8" 06 11/16" - 16 32,5 3/8" 06 11/16" - 16 32,5 OR93B-04-06-54 OR93B-06-06-46 OR93B-04-06-54 1/4” 04 11/16” - 16 10 3/8” 06 11/16” - 16 OR93B-06-06-L OR93B-06-06-L 6 6 OR93B-06-06-46 10 10 29 1,14 29 8 1,140,31 8 32 1,26 32,5 1,28 9,5 9,5 1,26 1,28 1,28 9,5 0,37 54 2,13 22 0,866 7/8" 22 0,866 7/8" 22 0,866 7/8" 0,37 54 2,13 22 0,866 0,37 46 1,81 22 0,866 9,5 9,5 0,37 0,37 46 54 1,81 2,13 7/8” 7/8” 10 3/8” 0610 OR93B-06-08-L 11/16” - 06 16 3/8" 32,5 - 161,28 33 9,5 1,300,3711 13/16" 540,43 2,13 64 22 2,52 0,866 7/8”15/16" 24 0,945 10 3/8” OR93B-08-08-L 0612 13/16” - 08 16 1/2" 33 - 161,30 41,5 11 1,630,4311 13/16" 640,43 2,52 64 24 2,52 0,945 15/16” 24 0,945 15/16" OR93B-08-08-L OR93B-08-10-70 12 1/2” 0812 1/2" 13/16” - 08 16 1" - 14 1,63 55 11 2,170,43 13,5 640,53 2,52 70 41,5 2,76 24 30 1,181 1.3/16" 0,945 15/16” 1" - 14 70 45 1,77 56,513,52,220,5313,5 700,53 2,76 2,76 30 30 1,181 1.3/16" 1,181 1.3/16” OR93B-06-08-L OR93B-08-10-70 OR93B-10-10-L 12 1/2” 0816 OR93B-10-10-L OR93B-12-12-96 OR93B-12-12-96 19 16 5/8” 10 19 3/4” 12 OR93B-16-16-L OR92B-20-20-66 25 31 5/8" 1” - 1410 3/4" 12 1” - 14 1.3/16" - 12 59,5 2,34 56,5 2,22 59,5 2,34 0,57 96 3,78 36 1,417 1.7/16" 41 1,614 1.5/8" 50 1,969 2" 13,5 0,53 70 2,76 30 1,181 1.3/16” 14,5 0,57 96 3,78 36 1,417 1.7/16” 1" 16 1.7/16" - 12 75,3 2,96 1.1/4" 20 1.11/16" - 12 82 3,23 1.3/16” - 12 14,5 14,8 14,8 0,58 0,58 114 66 4,49 2,60 OR93B-16-16-L OR92B-20-20-70 25 1” 1631 1.7/16” 12 1.1/4" -20 75,3 - 12 2,96 82 14,83,230,5814,8 114 1.11/16" 0,58 4,49 70 41 2,76 1,614 1.5/8” 2" 50 1,969 OR92B-20-20-66 OR92B-24-24-141 31 1.1/4” 2038 1.11/16” -2412 1.1/2" 82 14,84,430,5814,8 660,58 2,60 2" - 12 3,23112,5 141 50 5,55 1,969 60 2,3622” 2.3/8" OR92B-20-20-70 31 1.1/4” 20 1.11/16” - 12 82 OR92B-24-24-141 38 1.1/2” 24 2” - 12 OR93 3,23 14,8 0,58 70 2,76 50 1,969 2” 112,5 Nut type 4,43 14,8 0,58 141 5,55 60 2,362 2.3/8” OR92 NUT TYPE TIPO DI DADO HUTTER TYP TIPO DE TUERCA 90 - © Intertraco (Italia) S.p.A. All rights are reserved B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES MU10B SAE SAE 45° MALE B ES MASCHIO SAE CONO 45° T SAE Aussengewinde 45° Konus MACHO FIJO SAE 45° A MU10B CODE CODICE CODICE BEST.-NR CODIGO SAE 45° MALE HOSE BORE ITALIANO HOSE BORE TEDESCO SPAGNOLO DN INCH SIZE MU10B-04-04 6 DN 1/4"INCH04 MU10B-06-06 MU10B-04-04 10 6 3/8"1/4” 06 MU10B-08-08 12 1/2" 08 MU10B-08-10 12 1/2" 08 MU10B-12-12 19 3/4" 12 MU10B-06-06 MU10B-08-08 MU10B-08-10 MU10B-12-12 10 12 12 19 3/8” 1/2” 1/2” 3/4” T T A A [mm] [in] [in] inin 0,99 [mm] 12,7 [in] 0,50 [mm]14 0,55 [in] 9/16" [mm] 5/8" - 18 7/16” - 2029,2 04 1,15 25,2 15,7 0,99 0,6212,717 0,67 0,50 11/16" 14 0,75 3/4" 0,94 15/16" 1,06 1.1/16" 3/4" - 16 33,5 [in] 1,32 19 0,75 19 1,51 22,4 0,88 24 1,89 25,4 1,00 06 5/8” - 18 29,2 08 3/4” - 16 33,5 08 7/8” - 14 38,4 12 1.1/16” - 14 47,9 7/8" - 14 38,4 1.1/16" - 14 47,9 [mm] ES ES 25,2 7/16" - 20 SIZE [mm] B B 1,15 1,32 1,51 1,89 15,7 0,62 19 0,75 27 22,4 0,88 25,4 1,00 [in] [in] 0,551 9/16” 17 0,669 11/16” 19 0,748 3/4” 24 0,945 15/16” 27 1,063 1.1/16” © Intertraco (Italia) S.p.A. All rights are reserved - 91 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES FU11B SAE SAE 45° FEMALE SWIVEL CH FEMMINA SAE DIRITTA SV. 45° SAE Dichtkopf 45° Konus HEMBRA GIRATORIA RECTA SAE 45° T ES A FU11B CODICE SAE 45° FEMALE SWIVEL HOSE BORE DN FU11B-04-04 6 FU11B-04-05 6 CODE CODICE FU11B-04-06 BEST.-NR FU11B-05-06 CODIGO FU11B-06-06 FU11B-04-05 FU11B-08-08 FU11B-08-10 FU11B-04-06 FU11B-10-12 FU11B-05-06 FU11B-12-12 INCH A T SIZE Ø HOSE 04 7/16" - 20 Ø TUBO 1/4" 04 7/16" - 20 Ø 1/4" SCHLAUCH 04 5/8" - 18 Ø MANGUERA B [mm] [in] 23,9 23,9 ES [mm] [in] [mm] 0,94 10,8 0,43 0,94 10,8 0,43 CH [in] inin [mm] [in] inin 19 0,75 3/4" 22 0,87 7/8" 19 0,75 3/4" 22 0,87 1/4" 6 8 DN 10 106 FU11B-06-08 FU11B-04-04 FU11B-06-10 B 5/16" 05 A T 5/8" - 18 INCH06 SIZE 5/8" - 18 12 1/2" 1/4”08 043/4" - 161/2” - 20 126 1/2" 1/4”08 047/8" - 145/8” - 18 16 5/8" 19 3/4" 6 8 06 - 3/8" 10 7/8" - 14 1.1/16" - 14 30,7 7/8" [mm] [in] 0,75 0,34 3/4" 14 24 0,94 0,551 15/16" 9/16” 14 0,551 9/16” 21,4 0,84 9,5 0,37 14 0,551 9/16” 17 0,669 11/16” 23,9 0,94 19 0,748 3/4” 22 0,866 7/8” 1,04 2026,5 20,7 10 CH 0,438,7 19 23,9 043/4" - 167/16” ES 10,8 0,81 [mm] [in] 0,94 10,8 3/8" 3/8" 1/4”06 B 1,21 14,4 5/16”12 05 5/8” - 18 31,2 23,9 0,94 1.1/16" - 14 1,23 14,4 [mm]19 [in] 0,75 [mm] 3/4" 0,43 10,8 0,57 0,43 27 1,06 10,8 27 0,43 1,06 0,57 1.1/16" [in] 0,87 22 32 1,26 [in] 7/8" 1.1/4" [in] 19 0,748 3/4” 32 1,26 1.1/4" 22 0,866 7/8” 1.1/16" FU11B-06-06 10 3/8” 06 5/8” - 18 23,9 0,94 10,8 0,43 19 0,748 3/4” 22 0,866 7/8” FU11B-06-08 10 3/8” 06 3/4” - 16 26,5 1,04 10,8 0,43 19 0,748 3/4” 24 0,945 15/16” FU11B-08-08 12 1/2” 08 3/4” - 16 28 1,10 10,8 0,43 19 0,748 3/4” 24 0,945 15/16” FU11B-10-12 16 5/8” 10 1.1/16” - 14 30,7 1,21 14,4 0,57 27 1,063 1.1/16” 32 1,260 1.1/4” FU11B-12-12 19 3/4” 12 1.1/16” - 14 31,2 1,23 14,4 0,57 27 1,063 1.1/16” 32 1,260 1.1/4” B Series Catalogue_Rev00.2007.xls Pagina 54 di 85 The document is exclusive property of INTERTRACO S.p.A.. All rights are reserved. 92 - © Intertraco (Italia) S.p.A. All rights are reserved B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES FU91B SAE SAE 45° FEMALE SWIVEL - 90° ELBOW A B D FEMMINA SAE 90° SV. 45° 90° SAE Dichtkopf 45° Konus HEMBRA GIRATORIA a 90° SAE 45° T FU91B CODICE CODE FU91B-05-06 CH SAE 45° FEMALE SWIVEL - 90° ELBOW HOSE BORE DN CODICE BEST.-NR FU91B-06-10 CODIGO FU91B-06-06 10 10 FU91B-12-12 19 A T ØSIZE HOSE Ø TUBO Ø SCHLAUCH 3/8" 06 5/8" - 18 Ø MANGUERA 3/8" 06 7/8" - 14 INCH 3/4" DN 12 1.1/16" - 14 INCH SIZE B [mm] [in] [mm] T37 1,46 10,8 61,5 2,42 14,4 [mm] A D CH [in] [mm] [in] 0,43 37 1,46 [in] 0,57 B [mm] [in] inin 22 0,8661 7/8" 2,32 32 [mm] [in] 59 D CH [mm]1.1/4" [in] 1,2598 [mm] [in] [in] FU91B-05-06 8 5/16” 05 5/8” - 18 39 1,54 10,8 0,43 37 1,46 22 0,866 7/8” FU91B-06-06 10 3/8” 06 5/8” - 18 37 1,46 10,8 0,43 37 1,46 22 0,866 7/8” FU91B-12-12 19 3/4” 12 1.1/16” - 14 61,5 2,42 14,4 0,57 59 2,32 32 1,260 1.1/4” B Series Catalogue_Rev00.2007.xls Pagina 55 di 85 The document is exclusive property of INTERTRACO S.p.A.. All rights are reserved. © Intertraco (Italia) S.p.A. All rights are reserved - 93 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES ME10B SAE O-RING BOSS MALE B MASCHIO SAE O-RING SAE Aussengewinde O-RING BOSS MACHO FIJO O-RING BOSS T ES A ME10B CODE CODICE CODICE BEST.-NR CODIGO O-RING BOSS MALE Ø HOSE Ø TUBO HOSEØ BORE SCHLAUCH Ø MANGUERA DN INCH SIZE ME10B-04-04 6 DN 1/4"INCH 04 ME10B-04-05 ME10B-04-04 6 6 1/4"1/4” 04 ME10B-04-06 6 1/4" 04 ME10B-05-05 8 5/16" 05 ME10B-04-05 ME10B-04-06 6 6 ME10B-06-05 ME10B-05-05 1/4” T [mm] 7/16" - 20 SIZE 22 041/2" - 20 7/16” - 2023,5 9/16" - 18 24,5 04 1/2” - 20 04 9/16” - 18 1/2" - 20 A A 23,5 [in] 0,87 [mm] 0,93 22 B B [mm] [in] [in] inin 9,15 [in] 0,36 [mm]14 0,55 [in] 9/16" [mm] 9,15 0,87 0,369,1517 0,67 0,36 11/16" 14 0,67 11/16" 0,67 11/16" 10 0,39 17 0,93 9,15 0,36 17 23,5 24,5 10 3/8" 5/16”06 05 1/2” - 20 24,5 23,5 9/16" - 18 0,96 ME10B-06-05 ME10B-06-08 1010 3/8"3/8” 06 ME10B-06-10 ME10B-06-06 ES ES [mm] 0,96 ME10B-06-06 0,93 0,96 9,15 10 0,36 0,39 [in] [in] 0,551 9/16” 17 0,669 11/16” 17 0,669 11/16” 0,36 0,67 11/16" 17 0,669 11/16” 063/4" - 16 1/2” - 20 26,6 23,5 1,05 0,93 0,399,1517 0,93 0,449,1522 11,1 0,36 0,87 17 7/8" 0,669 11/16” 1010 3/8"3/8” 06 1,12 067/8" - 14 9/16” - 1828,5 24,5 12,7 0,96 0,50 10 27 1,06 0,39 1.1/16" 17 0,669 11/16” ME10B-08-08 ME10B-06-08 1210 1/2"3/8” 08 1,07 063/4" - 16 3/4” - 16 27,1 26,6 11,1 1,05 0,4411,122 0,87 0,44 7/8" 22 0,866 7/8” ME10B-08-10 12 1/2" 08 ME10B-08-12 12 1/2" 08 27 1,063 1.1/16” ME10B-10-08 16 5/8" 10 22 0,866 7/8” ME10B-06-10 ME10B-08-08 ME10B-08-10 ME10B-10-10 8 1/4” T 10 12 3/8” 1/2” 7/8" - 14 06 7/8” - 14 08 3/4” - 16 1.1/16" - 12 3/4" - 16 29 32 27,5 10 1,14 12,7 0,50 27 1,26 15 0,59 32 28,5 27,1 1,07 11,1 12,7 11,1 24 ME10B-08-12 ME10B-10-12 12 5/8"1/2” 10 1612 5/8"1/2” 10 087/8" - 14 7/8” - 14 29 08 1.1/16” - 1232 1.1/16" - 12 32 1,26 1,14 0,5012,727 1,26 0,59 15 32 15 ME10B-12-12 ME10B-10-08 1916 3/4"5/8” 12 1.1/16" - 12 3/4” - 16 32,5 27,5 1,28 10 15 1,08 0,5911,132 ME10B-12-14 ME10B-10-10 1916 3/4"5/8” 12 ME10B-12-16 19 3/4" 12 1.3/16" - 12 7/8” - 14 10 1.5/16" - 12 38,5 ME10B-16-16 25 1" 16 ME10B-10-12 ME10B-12-12 16 16 19 5/8” 3/4” 29 1,14 1,12 29 15,1 1,14 0,5912,7 1,52 15,1 0,59 36 1,52 15,1 0,59 38 10 1.1/16” - 12 32 12 1.1/16” - 12 32,5 1.5/16" - 12 38,6 12,7 1,26 1,28 1,06 1.1/16" 1,26 1.1/4" 0,50 1,06 1.1/16" 27 1,063 1.1/16” 0,59 1,26 32 1.1/4" 1,260 1.1/4” 1,26 0,44 1.1/4" 24 0,945 15/16” 27 1,063 1.1/16” 32 1,260 1.1/4” 0,50 0,44 0,50 1,42 1.7/16" 1,50 1.1/2" 32 1,260 1.1/4” 15,1 0,59 36 1,417 1.7/16” 15,1 15,1 0,59 0,59 ME10B-12-14 19 3/4” 12 1.3/16” - 12 40,5 ME10B-12-16 19 3/4” 12 1.5/16” - 12 38,5 1,52 15,1 0,59 38 1,496 1.1/2” ME10B-16-16 25 1” 16 1.5/16” - 12 38,6 1,52 15,1 0,59 38 1,496 1.1/2” 94 - © Intertraco (Italia) S.p.A. All rights are reserved B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES MV10B SAE O-RING BOSS MALE SWIVEL B CH MASCHIO GIREVOLE DIRITTO SAE O-RING T SAE Aussengewinde O-RING BOSS MACHO GIRATORIO RECTO O-RING BOSS A MV10B CODE CODICE CODICE BEST.-NR CODIGO MV10B-04-04 O-RING BOSS MALE SWIVEL Ø HOSE Ø TUBO HOSE BORE Ø SCHLAUCH DN INCH SIZE Ø MANGUERA 6 DN 1/4"INCH04 T T A B A [mm] [in] 7/16" - 20 SIZE 36,5 1,44 [mm] 9/16" - 18 40,5 40,5 B [mm] [in] [mm] 9,15 [in] 0,36 [mm]17 1,59 36,5 9,95 0,39 22 1,59 9,95 0,39 22 1,87 11,1 0,44 27 1,89 11,1 0,44 27 CH CH [in] inin 0,67 [in] 11/16" [mm] [in] 0,87 0,36 7/8" 0,669 11/16” 0,87 7/8" 1,06 1.1/16" 22 0,866 7/8” 1,06 1.1/16" 22 0,866 7/8” [in] MV10B-04-06 6 MV10B-06-06 10 MV10B-06-08 10 MV10B-08-08 12 MV10B-06-08 MV10B-08-10 12 10 1/2"3/8” 08 06 7/8" - 14 3/4” - 16 51 47,5 2,01 1,87 0,5011,1 27 12,7 0,44 1,06 27 1.1/16" 1,063 1.1/16” MV10B-08-08 MV10B-08-12 12 12 1/2"1/2” 08 1.1/16" - 12 3/4” - 1657,5 08 2,26 48 15,1 1,89 0,5911,1 36 1,42 0,44 1.7/16" 27 1,063 1.1/16” MV10B-10-10 MV10B-08-10 16 12 5/8"1/2” 10 7/8" - 14 08 2,01 51 12,7 2,01 0,5012,7 27 1,06 0,50 1.1/16" 27 1,063 1.1/16” MV10B-12-12 19 1.1/16" - 12 2,26 15,1 1,42 1.7/16" 36 1,417 1.7/16” MV10B-04-04 MV10B-04-06 MV10B-06-06 MV10B-08-12 6 6 10 12 1/4" 04 3/8" 06 3/8" 06 1/2" 08 1/4” 1/4” 3/8” 3/4" 1/2” 12 04 7/16” - 21 9/16" - 18 04 9/16” - 18 06 9/16” - 18 3/4" - 16 47,5 3/4" - 16 48 7/8” - 14 51 57,5 40,5 40,5 08 1.1/16” - 12 57,5 1,44 1,59 1,59 2,26 9,15 9,95 9,95 0,59 15,1 36 0,39 0,39 0,59 17 MV10B-10-10 16 5/8” 10 7/8” - 14 51 2,01 12,7 0,50 27 1,063 1.1/16” MV10B-12-12 19 3/4” 12 1.1/16” - 12 57,5 2,26 15,1 0,59 36 1,417 1.7/16” © Intertraco (Italia) S.p.A. All rights are reserved - 95 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES MV40B SAE O-RING BOSS MALE SWIVEL - 45° ELBOW A CH MASCHIO GIREVOLE 45° SAE O-RING D 45° SAE Aussengewinde O-RING BOSS T MACHO GIRATORIO 45° O-RING BOSS B MV40B CODE CODICE CODICE BEST.-NR CODIGO O-RING BOSS MALE SWIVEL - 45° ELBOW Ø HOSE Ø TUBO Ø SCHLAUCH HOSE BORE Ø MANGUERA DN INCH INCH 3/8" SIZE MV40B-06-06 DN 10 MV40B-06-06 MV40B-08-10 10 12 3/8” 1/2" 0806 MV40B-08-10 12 1/2” 08 T T SIZE 06 9/16" - 18 A A [mm] [mm] B B [in] [mm] [in] [mm] [in] 9/16” 7/8" - 14 - 18 9,95 7/8” - 14 12,7 96 - © Intertraco (Italia) S.p.A. All rights are reserved [in] D D [mm] [mm] CH [in] [in] [mm] [in] CH inin [mm] [in] 0,39 22 0,866 7/8” 0,50 27 1,063 1.1/16” [in] B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES MV90B SAE O-RING BOSS MALE SWIVEL - 90° ELBOW A B D MASCHIO GIREVOLE 90° SAE O-RING 90° SAE Aussengewinde O-RING BOSS MACHO GIRATORIO 90° O-RING BOSS T MV90B CODE CODICE BEST.-NR CODICE CODIGO CH Ø HOSEO-RING BOSS Ø TUBO Ø SCHLAUCH T HOSE BORE Ø MANGUERA T DN DN INCH INCH SIZE SIZE MV90B-04-04 6 1/4" 04 7/16" - 21 MV90B-04-06 6 1/4" 04 7/16" - 21 MV90B-06-06 10 3/8" 06 9/16" - 18 10 3/8" 06 MV90B-06-08 MV90B-06-10 10 10 3/8” 3/8" MV90B-08-08 MV90B-06-10 12 10 1/2" 3/8” MV90B-08-10 MV90B-08-08 12 12 MV90B-08-12 MV90B-12-12 MV90B-12-12 19 MV90B-04-04 MV90B-04-06 MV90B-06-06 MV90B-06-08 MV90B-08-10 MV90B-08-12 6 B B [mm] [in] [mm] [in] 90 3,54 D D CH CH [mm] [mm] [in] [in] [mm] [in] [mm] 9,15 0,36 38,85 1,53 17 9,95 0,39 56,2 2,21 22 9,95 0,39 43,25 1,70 22 0,44 52,4 0,6693 11/16" 0,8661 7/8" 0,8661 7/8" [in] 9/16” - 18 28 1,10 9,95 3/4" - 16 9/16” - 18 34,5 1,36 34,5 1,36 9,95 11,1 0606 3/4” 7/8" - 14- 16 34,5 34,5 1,36 1,36 11,1 12,7 0,44 0,50 43,25 2,06 1,70 27 22 1,0630,866 7/8” 1.1/16" 52,4 2,12 2,06 27 27 1,0631,063 53,8 1.1/16"1.1/16” 0806 3/4" - 16- 14 7/8” 44,5 34,5 1,75 1,36 11,1 12,7 0,44 0,50 57,4 53,8 1/2" 1/2” 0808 44,5 1,75 1,75 44,5 12,7 11,1 0,50 0,44 12 1/2" 08 7/8" - 14- 16 3/4” 1.1/16" - 12 58,8 1.1/16"1.1/16” 57,4 2,31 2,22 27 27 1,0631,063 94 3,70 36 1,4173 1.7/16" 19 3/4" 12 1.1/16" - 12 10 12 12 3/8” 1/2” 1/2” 3/4” 04 06 08 08 12 34,5 61 1,36 2,40 0,39 15,1 0,59 2,40 15,1 15,1 0,59 2,42 15,1 0,59 7/8” - 14 44,5 1,75 12,7 1.1/16” - 12 61 1.1/16” - 12 61,5 61,5 0,39 2,42 0,50 0,59 56,2 58,8 94 94 94 1,53 [mm][in] [in] inin 9,15 1,10 38,85 [in] 3,54 28 0,36 [mm] 90 1/4” 04 A A 7/16” - 21 6 1/4” MALE SWIVEL - 90° ELBOW 2,21 17 0,669 11/16” 22 0,866 7/8” 2,26 1.1/16"1.1/16” 2,12 27 27 1,0631,063 2,31 3,70 3,70 3,70 36 27 1,063 1.1/16” 36 1,417 1.7/16” 36 1,417 1.7/16” 1,4173 1.7/16" © Intertraco (Italia) S.p.A. All rights are reserved - 97 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES MZ10B SAE SAE INVERTED FLARE MALE SWIVEL B CH MASCHIO GIREVOLE DIRITTO SAE SV. INVERTITA T SAE INVERTED FLARE MALE SWIVEL MACHO GIRATORIO SAE INVERTIDO A MZ10B CODE CODICE CODICE BEST.-NR CODIGO SAE INVERTED FLARE MALE SWIVEL Ø HOSE Ø TUBO HOSEØ BORE SCHLAUCH DN INCH SIZE Ø MANGUERA MZ10B-04-04 6 DN 1/4"INCH 04 MZ10B-04-05 MZ10B-04-04 1/4"1/4” 04 MZ10B-06-04 6 6 10 3/8" 06 MZ10B-06-05 10 3/8" 06 MZ10B-06-06 10 3/8" 06 MZ10B-04-05 MZ10B-06-05 MZ10B-06-06 MZ10B-08-08 MZ10B-08-08 6 10 1/4” 3/8” 1210 1/2"3/8” 08 12 1/2” T T 7/16" - 24 SIZE A [mm] [in] 48 1,89 [mm] 041/2" - 20 7/16” - 24 48 7/16" - 24 1,89 48 04 1/2” - 20 06 1/2” - 20 1/2" - 20 48 [mm] B [mm] [in] inin 7/16" [mm] [in] 10,2 1,89 0,409,1 16 0,63 0,36 11 0,433 0,40 16 0,630 0,40 16 0,630 0,40 0,75 16 3/4" 0,630 0,46 19 0,748 10,2 10,2 0,40 16 1,89 10,2 0,40 16 063/4" - 18 5/8” - 18 48 48 1,89 1,89 0,4610,2 19 11,7 08 48 48 3/4” - 18 98 - © Intertraco (Italia) S.p.A. All rights are reserved 48 CH 0,43 [in] 1,89 [in] CH 0,36 [mm]11 9,1 [in] 1,89 5/8" - 18 48 B A 1,89 1,89 10,2 11,7 0,63 0,63 [in] 7/16” 3/4” B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES MZ40B SAE SAE INVERTED FLARE MALE SWIVEL - 45° ELBOW A MASCHIO GIREVOLE 45° SAE SV. INVERTITA CH D SAE INVERTED FLARE MALE SWIVEL - 45° ELBOW CODE CODICE CODICE BEST.-NR CODIGO T B MZ40B MACHO GIRATORIO SAE INVERTIDO SAE INVERTED FLARE MALE SWIVEL - 45° ELBOW Ø HOSE Ø TUBO Ø SCHLAUCH HOSE BORE Ø MANGUERA DN INCH SIZE [in] [mm] [in] [mm] [in] [in] inin 7/16” 1/2" - 20 - 24 40 42,5 1,57 1,67 9,1 10,2 0,36 0,40 14,5 17 0,57 16 110,62990,433 0,67 MZ40B-06-05 MZ40B-04-05 10 6 3/8" 1/4” 0604 1/2" - 20- 20 1/2” 42,5 1,73 1,67 44 10,2 10,2 0,40 0,40 17 19 0,67 0,75 16 160,62990,630 MZ40B-06-06 MZ40B-06-05 10 10 3/8" 3/8” 0606 5/8" - 18- 20 1/2” 45,5 1,73 1,79 44 10,2 10,2 0,40 0,40 19 19 0,75 0,75 16 160,62990,630 MZ40B-08-08 12 1/2" 08 3/4" - 18 11,7 0,46 MZ40B-08-08 12 0,46 1/2” 08 5/8” - 18 47 1,85 10,2 3/4” - 18 50,5 1,99 11,7 0,40 21,5 19 21,5 [in] 0,61 [mm] 0404 06 [mm] 15,5 CH 1/4” 1/4" 1,99 [in] 0,36 CH 66 50,5 [in] [mm] 1,57 9,1 D D MZ40B-04-04 MZ40B-04-05 3/8” 7/16" - 24 [mm] [mm] 40 B B MZ40B-04-04 10 SIZE 04 A A DN 6 MZ40B-06-06 INCH 1/4" T T 0,85 0,75 0,85 [mm] [in] 11 0,4331 7/16" 19 16 19 0,748 [in] 7/16” 3/4" 0,630 0,748 3/4” © Intertraco (Italia) S.p.A. All rights are reserved - 99 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES MZ90B SAE SAE INVERTED FLARE MALE SWIVEL 90° ELBOW A MASCHIO GIREVOLE 90° SAE SV. INVERTITA CH D SAE INVERTED FLARE MALE SWIVEL 90° ELBOW B MACHO GIRATORIO SAE INVERTIDO T MZ90B CODE CODICE BEST.-NR CODIGO CODICE Ø HOSE Ø TUBOSAE INVERTED Ø SCHLAUCH T Ø MANGUERA HOSE BORE T DN INCH INCH SIZE SIZE DN FLARE MALE SWIVEL - 90° ELBOW A B A [mm] [mm] [in] [in] B MZ90B-04-04 MZ90B-04-04 6 1/4" 1/4” 0404 7/16" - 24- 24 7/16” 3130 MZ90B-04-05 MZ90B-04-05 6 6 1/4" 1/4” 0404 32,5 1,26 1,28 32 10 3/8" 06 1/2" - 20- 20 1/2” 1/2" - 20 10 3/8" 06 5/8" - 18 12 1/2" 08 3/4" - 18 MZ90B-06-05 MZ90B-06-05 10 MZ90B-06-06 10 MZ90B-08-08 12 MZ90B-06-06 MZ90B-08-08 3/8” 3/8” 1/2” 06 06 08 32,5 1,18 1,22 1,28 D [in] [in] 9,1 9,1 0,36 0,36 27 26 10,2 10,2 0,40 0,40 30,5 31,5 10,2 0,40 30,5 10,2 0,40 35 1,38 16 41,5 1,63 19 32 1,26 10,2 5/8” - 18 36 1,42 10,2 11,7 0,46 3/4” - 18 41,5 1,63 11,7 0,46 40 1,38 1,57 100 - © Intertraco (Italia) S.p.A. All rights are reserved CH [in] [mm] [mm][in] [in] inin [in] [mm] [mm] 1/2” - 20 35 D [mm] [mm] 0,40 0,40 31,5 35 44 CH [in] 1,06 7/16" 7/16” 1,02 11 110,4331 0,433 1,20 1,24 16 160,6299 0,630 1,20 16 0,6299 1,24 1,38 1,73 16 0,630 0,6299 16 19 0,630 0,748 3/4" 0,748 3/4” B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES MFA10B SAE SAE FLARLESS MALE ASSEMBLY B MASCHIO SAE SV. 24 SAE FLARLESS MALE ASSEMBLY MACHO FIJO SAE INVERTIDO T ES A MFA10B CODE CODICE BEST.-NR CODICE CODIGO MFA10B-04-04 MFA10B-04-04 MFA10B-04-05 MFA10B-04-05 MFA10B-06-05 MFA10B-06-05 MFA10B-06-06 MFA10B-06-06 MFA10B-06-08 MFA10B-06-08 MFA10B-08-08 MFA10B-08-08 MFA10B-08-10 MFA10B-08-10 MFA10B-12-12 MFA10B-12-12 MFA10B-16-16 MFA10B-16-16 SAE Ø HOSE Ø TUBO Ø SCHLAUCH HOSE BORE Ø MANGUERA FLARLESS MALE ASSEMBLY DN DN INCH INCHSIZESIZE 6 1/4" 04 1/4" 04 10 3/8" 06 10 3/8" 06 10 3/8" 06 12 1/2" 08 12 1/2" 08 19 3/4" 12 6 6 6 10 10 10 12 12 19 25 25 1/4” 1/4” 3/8” 3/8” 3/8” 1/2” 1/2” 1" 04 04 06 06 06 08 08 A T T A B B [mm] [mm] [in] [mm] 7/16" - 20 24 24 0,94 11,5 0,45 1/2" - 20 25 0,98 11,5 0,45 1/2" - 20 25 0,98 11,5 0,45 9/16" - 18 25,4 1,00 11,9 0,47 3/4" .- 16 27,8 1,09 14,3 0,56 3/4" .- 16 28,3 1,11 14,3 0,56 7/8" - 14 31,9 1,26 15,9 0,63 1.1/16" - 12 35 1,38 17,5 0,69 7/16” - 20 1/2” - 20 1/2” - 20 9/16” - 18 3/4” - 16 3/4” - 16 7/8” - 14 3/4” 16 12 1.1/16" 1.1/16” - 12 - 12 1” 16 1.1/16” - 12 25 25 25,4 27,8 28,3 31,9 35 41 41 [in] 0,94 0,98 0,98 1,00 1,09 1,11 1,26 ES [in] [mm] [in] [in][mm] [mm] 11,5 11,5 11,5 11,9 14,3 14,3 15,9 inin [in] 14 0,55 14 0,551 17 0,55 11/16" 0,45 0,45 14 17 0,67 9/16" 0,669 9/16" [in] 9/16” 11/16” 0,45 17 0,669 11/16” 0,47 17 0,669 11/16” 0,56 19 0,748 3/4” 0,56 19 0,748 3/4” 0,63 24 0,945 15/16” 17 19 19 24 27 1,38 17,5 17,5 0,69 0,6936 1,61 17,5 0,69 1,61 ES 0,67 0,75 0,75 0,94 11/16" 3/4" 3/4" 15/16" 1,06 1.1/16" 27 1,42 1.7/16" 1,063 1.1/16” 36 1,417 1.7/16” © Intertraco (Italia) S.p.A. All rights are reserved - 101 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES MN10B NPTF ES NPTF MALE (60° CONE SEAT) B MASCHIO NPTF SV. 60° T AGN Anschlussstutzen mit konischem NPTF-Gewinde selbstdichtend 60° KONUS MACHO FIJO NPTF CONO 60° A MN10B CODICE CODE CODICE MN10B-02-02 BEST.-NR CODIGO MN10B-03-02 NPTF MALE (60° CONE SEAT) HOSE BORE Ø HOSE DN 3 Ø TUBO SIZE A T [mm] Ø SCHLAUCH 1/8" 02 1/8" - 27 Ø MANGUERA B ES A [in] [mm] [in] 9,5 0,37 11,11 0,44 7/16" 9,5 0,37 11,11 0,44 7/16" 14 0,55 14 0,55 9/16" T 20,8 [in] [mm] 0,82 3/16" 03 1/8" - 27 20,8 0,82 1/4" 04 1/4" - 18 1/8” 1/8" -02 04 27 26,5 1,04 1/8” - 27 0,89 20,8 22,5 9,5 0,82 12 0,37 9,5 0,47 MN10B-04-04 MN10B-03-02 6 1/4" 5 04 18 3/16” 1/4" -03 26,5 14 1/8” - 27 1,04 20,8 MN10B-04-06 6 1/4" 04 3/8" - 18 MN10B-04-08 6 1/4" 04 1/2" - 14 MN10B-05-04 8 5/16" 05 MN10B-04-04 8 MN10B-05-06 MN10B-06-04 10 MN10B-06-06 MN10B-06-08 MN10B-04-04 5 INCH 6 MN10B-02-02 6 MN10B-04-02 MN10B-03-04 DN 3 1/4" 28 1,10 33 1,30 [mm] 6 3/8” - 18 10 3/8" 06 3/8" - 18 28 1,10 10 3/8" 06 1/2" - 14 33,5 1,32 MN10B-05-04 12 MN10B-08-04 8 1/2" 5/16” 1/4" -05 08 18 1/4” - 18 1,12 26,5 28,5 14 MN10B-08-06 MN10B-05-06 12 1/2" 8 08 18 5/16” 3/8" -05 28,5 3/8” - 18 1,12 MN10B-08-08 12 1/2" 08 1/2" - 14 MN10B-08-12 12 MN10B-06-06 16 MN10B-10-08 1/2" 10 5/8" 08 3/4" - 14 3/8” 1/2" -06 10 14 3/8” - 18 1,32 33,5 28 19 MN10B-10-12 MN10B-06-08 16 5/8" 10 10 14 3/8” 3/4" -06 1/2”41- 14 1,61 19 33 MN10B-12-08 19 3/4" 12 1/2" - 14 MN10B-12-12 19 3/4" 12 3/4" - 14 MN10B-12-16 19 12 1" - 11.1/2 MN10B-08-04 MN10B-08-06 MN10B-16-12 MN10B-08-08 25 MN10B-16-16 MN10B-08-12 25 MN10B-16-20 MN10B-10-08 31 MN10B-20-20 MN10B-20-24 MN10B-10-12 MN10B-24-24 38 MN10B-12-08 51 MN10A-32-32 MN10B-12-12 10 12 12 3/4" 1" 12 1" 3/8” 1/2” 06 41,5 1,63 1/2” 5/8” 24 08 10 3/4“ - 14 1 1/2" - 11.1/2 3/4” 2" - 11.1/2 12 32 3/4” 12 1,87 1/2“ - 14 2,48 63,1 3/4“ - 14 64 2,52 9/16” 0,38 14 0,551 9/16” 3/4" 0,55 14 0,551 9/16” 19 0,748 3/4” 0,75 14 28 17 0,67 14 11/16" 14 0,55 19 0,75 3/4" 19 0,75 22 0,87 7/8" 0,75 22 0,866 7/8” 1,04 22 0,55 14 0,87 0,55 7/8" 14 0,551 9/16” 0,55 1,10 19 0,75 14 3/4" 0,55 19 0,748 3/4” 19 0,75 22 0,87 7/8" 19 0,75 27 0,55 0,669 11/16” 14 0,94 1.1/16" 17 1,10 24 0,75 1,06 0,55 15/16" 19 0,748 3/4” 22 0,866 7/8” 0,55 22 0,866 7/8” 0,55 19 0,748 3/4” 33 14 28 26,5 0,55 1,10 1,30 1,04 19 14 9/16" 0,55 0,75 1,30 27 1,06 19 1.1/16" 0,75 19 0,75 27 1,06 1.1/16" 19 0,75 27 1,06 1.1/16" 42,5 19 1/2“ - 14 1,67 33,5 47,5 0,551 0,55 16 14 1/2” 3/4" -08 1" - 11.1/2 14 0,55 1,04 19 3/8” - 18 1,83 28,5 46,5 24 5/8”1 1/4" - 11.1/2 10 20 19 1,36 14 9,6 0,55 08 1/2” 16 1.1/4" 19 2" 34,5 1,02 28,5 24 34 33,5 24,5 41 25,5 1,12 14 1,12 36 14 1,42 0,75 1,32 32 1,26 19 1.1/4" 0,75 22 0,866 7/8” 0,94 1,42 19 1.7/16" 0,75 27 1,063 1.1/16” 1,32 46 0,96 19 1,81 0,75 1.13/16" 24 0,945 15/16” 1,61 19 0,75 27 1,063 1.1/16” 0,75 2.9/16" 27 1,063 1.1/16” 0,75 27 1,063 1.1/16” 0,94 1,34 1,00 36 50 1,97 1/2“ - 14 3,02 76,7 34,5 26 1,36 65 1,02 19 2,56 3/4“ - 14 41,5 1,63 19 B Series Catalogue_Rev00.2007.xls 1.7/16" 2" Pagina 64 di 85 The document is exclusive property of INTERTRACO S.p.A.. All rights are reserved. 102 - © Intertraco (Italia) S.p.A. All rights are reserved [in] 0,87 14 1/4” - 18 12 16 1,40 25,8 08 16 1.1/2" 35,5 1/4” - 18 0,55 7/8" 14 MN10B-06-04 7/16” 0,87 1,04 1,42 0,437 22 26,5 36 11,11 0,75 14 1/4”28- 18 1,10 26,5 1/2” - 14 7/16” 19 1/4" - 18 04 0,437 3/4" 05 18 1/4” 3/8" -04 1/4” 11,11 9/16" 0,37 06 6 0,37 1/2" 0,75 3/8" MN10B-04-08 [in] 0,55 9,5 5/16" 6 04 [mm] 19 1/8” - 27 1,04 22,1 26,5 14 1/4” [in] 0,55 04 MN10B-04-06 [mm] 0,55 0,82 14 1/4" - 18 1/4” [in] ES inin 14 1/4” - 18 6 3/16” SIZE 03 MN10B-04-02 5 INCH B ➔ B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES CODE CODICE BEST.-NR CODIGO Ø HOSE Ø TUBO Ø SCHLAUCH Ø MANGUERA A T DN INCH SIZE MN10B-12-16 19 3/4” 12 MN10B-16-12 25 1” MN10B-16-16 25 MN10B-20-20 B ES [mm] [in] [mm] [in] [mm] [in] 1“ - 11.1/2 46,5 1,83 24 0,94 36 1,417 1.7/16” 16 3/4“ - 14 42,5 1,67 19 0,75 32 1,260 1.1/4” 1” 16 1“ - 11.1/2 47,5 1,87 24 0,94 36 1,417 1.7/16” 31 1.1/4” 20 1 1/4“ - 11.1/2 63 2,48 24,5 0,96 46 1,811 1.13/16” MN10B-24-24 38 1.1/2” 24 1 1/2“ - 11.1/2 64 2,52 25,5 1,00 50 1,969 2” MN10B-32-32 51 2” 32 2“ - 11.1/2 79 3,11 26 1,02 65 2,559 2.9/16” MNA10B-32-32(1) 51 2” 32 2“ - 11.1/2 111 4,37 51 2,01 65 2,559 2.9/16” [in] (*1) MNA10B - NPTF MALE (60 CONE SEAT) - LONG NOSE API STYLE VERSION - MASCHIO NPTF SV. 60 (VERSIONE API) - NPTF AUSSENGEWINDE 60 KONUS (LANGE VERSION) - MACHO FIJO NPTF CONO 60 TIPO LARGO ESTILO API © Intertraco (Italia) S.p.A. All rights are reserved - 103 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES NPTF MG10B NPTF MALE SWIVEL ( 60° CONE SEAT) B CH MASCHIO GIREVOLE DIRITTO NPTF CONO 60° T NPTF Aussengewinde 60° Konus MACHO GIRATORIO NPTF CONO 60° A MG10B CODE CODICE CODICE BEST.-NR CODIGO MG10B-04-02 NPTF MALE SWIVEL ( 60° CONE SEAT) Ø HOSE Ø TUBO HOSE BORE Ø SCHLAUCH DN INCH SIZE Ø MANGUERA 6 MG10B-04-04 6 MG10B-04-06 6 MG10B-06-04 10 MG10B-06-06 10 MG10B-04-02 MG10B-04-04 MG10B-04-06 04 DN 1/4" INCH 6 6 1/4" 1/4" 3/8" 04 T T A [mm] 1,44 [mm] 9,5 [in] 0,37 [mm]17 36,5 1,44 14 0,55 1,65 14 0,55 1,32 14 0,55 1/8” - 27 36,5 1/4” 04 1/4” - 18 36,5 3/8" - 18 3/8" - 18 41,8 33,5 04 3/8” - 1841,8 3/8" - 18 41,8 1,65 MG10B-06-04 MG10B-06-08 06 1/2" - 14 1/4” - 1841,5 MG10B-08-06 MG10B-06-06 12 10 1/2" 3/8” 08 3/8" - 18 06 3/8” - 1842,3 MG10B-08-08 MG10B-06-08 1/2" - 14 06 MG10B-10-12 12 10 1/2" 3/8” 08 16 5/8" 10 MG10B-12-08 19 MG10B-12-12 19 MG10B-08-08 12 12 3/4" 3/4" 1,44 9,5 14 22 17 CH inin 0,67 [in] 11/16" [mm] 0,67 11/16" 0,87 7/8" 0,67 11/16" 0,37 0,55 [in] [in] 17 0,669 11/16” 17 0,669 11/16” 22 0,866 7/8” 0,55 0,87 33,5 1,63 0,55 1,06 17 1.1/16" 0,669 11/16” 1,67 41,8 14 1,65 0,55 14 22 0,87 0,55 7/8" 22 0,866 7/8” 1,65 41,5 19 1,63 0,75 19 27 19,4 0,76 36 1,06 0,75 1.1/16" 27 1,063 1.1/16” 3/4" - 14 1/2” - 14 42 54,5 1,42 1.7/16" 1/2" - 14 56,5 2,22 19 0,75 1,06 1.1/16" 22 0,866 7/8” 2,17 19,4 0,76 1,42 1.7/16" 27 1,063 1.1/16” 0,76 1,50 36 1.1/2" 1,417 1.7/16” 08 1/2” 08 12 1,44 17 CH [in] 1,65 0,55 14 22 1,32 0,75 14 27 19 1/2” 12 [mm] 36,5 6 3/8" 1/4” 06 10 10 3/8" 3/8” 06 MG10B-08-06 B [in] 1/4" - 18 04 06 [mm] 1/8" - 27 SIZE 1/4” 04 B A [in] 3/4" - 14 3/8” - 18 1/2” - 14 55 2,15 42,3 42 14 1,67 1,65 14 19 27 36 0,75 MG10B-10-12 MG10B-16-16 25 16 1" 5/8” 16 10- 11 1/2 3/4” - 1462,5 1" 54,5 2,46 MG10B-12-08 19 3/4” 12 1/2” - 14 56,5 2,22 19 0,75 27 1,063 1.1/16” MG10B-12-12 19 3/4” 12 3/4” - 14 55 2,17 19,4 0,76 36 1,417 1.7/16” MG10B-16-16 25 1” 16 1” - 11 1/2 62,5 2,46 24,2 0,95 38 1,496 1.1/2” 104 - © Intertraco (Italia) S.p.A. All rights are reserved 2,15 0,9519,438 24,2 0,55 7/8" B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES MG90B NPTF NPTF MALE SWIVEL - 90° ELBOW ( 60° CONE SEAT) A T MG90B CODE CODICE BEST.-NR CODIGO CODICE D 90° NPTF Aussengewinde 60° Konus B MASCHIO GIREVOLE 90° NPTF CONO 60° MACHO GIRATORIO NPTF CONO 60° CH Ø HOSE Ø TUBONPTF Ø SCHLAUCH Ø MANGUERA HOSE BORE DN INCH INCH SIZE SIZE DN MALE SWIVEL - 90° ELBOW ( 60° CONE SEAT) T A B A [mm] [mm] [in] [in] B D [in] [in] D [mm] [mm] MG90B-04-04 MG90B-04-04 66 1/4" 1/4” 0404 3/8" - 18- 18 1/4” 2828 1,10 1,10 14 14 0,55 0,55 37 37 MG90B-04-06 MG90B-04-06 66 1/4" 1/4” 0404 2828 1,10 1,10 14,3 14,3 0,56 0,56 43,2 43,2 MG90B-06-04 10 3/8" 06 3/8" - 18- 18 3/8” 3/8" - 18 MG90B-06-06 10 3/8" 06 3/8" - 18 3/8” - 18 34,5 1,36 14,3 MG90B-06-08 10 3/8" 06 1/2" - 14 1/2” - 14 34,5 1,36 19 MG90B-08-08 MG90B-08-06 12 12 1/2” 1/2" 0808 1/2” 3/8" - 18- 14 44,5 MG90B-12-12 MG90B-08-08 19 12 3/4” 1/2" 0812 3/4” 1/2" - 14- 14 MG90B-12-12 19 3/4" 12 3/4" - 14 MG90B-06-06 MG90B-06-08 10 10 3/8” 3/8” 06 06 T [mm] [mm] CH CH [in] [mm] [mm][in] [in] [in] inin [in] 1,46 11/16" 11/16” 1,46 17 17 0,670,669 1,70 7/8" 7/8” 1,70 22 22 0,870,866 17 0,67 11/16" 14 0,55 14,3 0,56 44,7 1,76 22 19 0,75 54,5 2,15 27 1,75 19 14,3 0,75 0,56 59,5 2,34 22 27 0,871,063 7/8" 1.1/16” 61,5 44,5 2,42 1,75 19,4 19 0,76 0,75 91,4 59,5 3,60 27 36 1,061,417 2,34 1.1/16"1.7/16” 19,4 0,76 91,4 3,60 34,5 34,5 61,5 1,36 1,36 2,42 0,56 0,75 44,7 54,5 1,76 2,15 36 22 27 0,866 7/8” 1,063 1.1/16” 0,87 1,06 1,42 7/8" 1.1/16" 1.7/16" © Intertraco (Italia) S.p.A. All rights are reserved - 105 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES NPTF FN10B NPTF FEMALE RIGID B ES FEMMINA FISSA NPTF T NPTF Innengewinde-Armatur HEMBRA RIGIDA RECTA NPTF A FN10B CODE CODICE CODICE BEST.-NR CODIGO NPTF FEMALE RIGID Ø HOSE Ø TUBO HOSEØBORE SCHLAUCH Ø MANGUERA DN INCH SIZE T T A A [mm] [in] [in] inin 6 DN 1/4" 04 INCH 1/8" - 27 SIZE 21,5 0,85 [mm] 7,87 [in] 0,31[mm]17 0,67 [in] 11/16" [mm] [in] FN10B-04-04 FN10B-04-02 6 6 1/4" 04 1/4” 1/4" - 18 04 1/8” - 27 26,5 1,04 21,5 11,94 0,85 0,477,8719 0,75 0,31 3/4" 17 0,669 11/16” FN10B-04-06 6 1/4" 04 3/8" - 18 0,87 7/8" FN10B-06-04 10 0,75 3/4" 19 0,748 3/4” FN10B-06-06 10 0,87 7/8" 22 0,866 7/8” FN10B-06-08 10 FN10B-06-06 FN10B-08-06 12 10 1/2" FN10B-08-08 FN10B-06-08 FN10B-04-06 FN10B-06-04 6 6 3/8" 3/8" 1/4” 04 1/4” - 18 1/4” 04 3/8” - 18 06 06 10 3/8" 3/8” 06 1/4" - 18 3/8" - 18 [in] 28 26,5 28 [mm] ES ES FN10B-04-02 FN10B-04-04 [mm] B B 1,10 12,7 0,50 22 1,04 11,94 0,47 19 1,10 12,7 0,50 22 26,5 28 26,5 1,30 3/8” 08 06 1/4” - 18 33 1/2" - 14 06 3/8" - 18 3/8” - 18 28,5 12 10 1/2" 08 3/8” FN10B-12-12 FN10B-08-06 19 12 3/4" FN10B-08-08 FN10B-12-12 1,04 1,10 11,94 0,47 12,7 0,50 [in] 0,47 1,06 1.1/16" 19 0,748 3/4” 27 1,12 1,04 0,6611,9427 1,06 0,5012,722 12,7 0,50 0,87 22 7/8" 0,866 7/8” 1/2" - 14 1/2” - 14 33,5 06 1,32 33 16,76 1,30 0,6616,7627 1,06 0,66 1.1/16" 27 1,063 1.1/16” 12 1/2” 3/4" - 14 3/8” - 18 35,5 08 1,40 28,5 16,76 1,12 0,6612,732 1,26 0,50 1.1/4" 22 0,866 7/8” 12 1/2” 08 1/2” - 14 33,5 1,32 16,76 0,66 27 1,063 1.1/16” 19 3/4” 12 3/4” - 14 35,5 1,40 16,76 0,66 32 1,260 1.1/4” 106 - © Intertraco (Italia) S.p.A. All rights are reserved 16,76 FN11B NPSM ES NPSM FEMALE SWIVEL (60° CONE SEAT) CH A FN11B-04-06 DN 6 FN11B-04-06 FN11B-06-06 FN11B-06-08 FN11B-05-04 FN11B-12-12 6 1/4" 04 INCH SIZE CODICE 1/4” 04 T TNPSM HEMBRA GIRATORIA RECTA NPSM CONO 60° [mm] HOSE BORE 24 SIZE 24 0,94 0,94 4,2 [in] [mm] T FN11B-04-04 6 10 1/4”3/8" 0406 04 26,5 1/4" - 181,04 1,04 5,7 26,5 8 FN11B-04-06 5/16” 05 6 1/4" 04 0,94 8 5/16" 1/2" - 14 10 3/8" 10 FN11B-08-08 FN11B-05-04 12 1/2" 08 3/8” 06 3/8” 06 FN11B-06-06 1/4” - 18 24 05 5,7 1/2” - 14 28,5 1,12 6,9 3/8" 3/4" - 14 FN11B-12-12 19 12 FN11 3/4” 19 3/4” -3/4" 14 FN12B-16-16 25 1” - 11.1/2 16 1/4" 29 - 181,14 1,04 FN11B-12-12 1” 4,2 26,5 06 06 12 FN11B-08-08 1/2” 08 1/2” - 14 29 25 1" 16 12 1" -1/2" 11.1/2 08 FN12B-16-16 FN11B-08-12 19 FN11B-08-12 3/4” 08 3/4” -3/4" 14 37,3 19 08 FN12B-16-16 3/8" - 18 3/8” - 18 FN11B-06-08 19 3/4" 12 10 25 1" B B ES ES [mm] SWIVEL [in] [mm] (60° [in] CONE [mm] SEAT) [in] inin FEMALE 1/4" - 18 1/4” INCH - 18 DN A A 63/8”3/8" -1/4" 18 - 18 FN11B-08-08 FN11B-06-06 10 FN12B-08-12 B Ø HOSE HOSE BORE Ø TUBO Ø SCHLAUCH DNFN11B INCH SIZE Ø MANGUERA FN11B-04-04 FN11B-05-04 FN11B-06-08 Dichtkopf 60° NPSM A B NPSM FEMALE SWIVEL (60° CONE SEAT) FN11B CODE CODICE CODICE BEST.-NR FN11B-04-04 CODIGO FEMMINA NPSM DIRITTA CONO 60° CH T ES T B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES 3/8" - 18 1/2" - 141,45 36,8 0,17 [in]A [mm] 19 0,75 [in] B 0,17 [in]19 [mm] 0,748 [in] [mm] 24 0,22 22 5,7 0,94 0,22 26,5 0,17 24 6,9 1,04 19 3/4" [mm] 19 [mm] ES [in] 3/4” [mm] 19 [in] 0,748 inin [in] 5,7 7/8" 3/4” 22 7/ 3/4" 1,06 19 0,748 1.1/16" 0,22 0,748 22 3/4” 0,866 19 0,748 4,2 22 0,17 0,87 19 7/8" 0,748 27 0,22 22 28,5 8,7 1,12 0,34 6,9 27 0,27 1,06 32 1,26 0,866 7/8” 0,866 7/8” 22 0,866 27 1,063 1.1/16” 0,866 7/8" 22 0,866 1.1/16" 32 22 3/ 0,866 7/ 7/8" 1,26 27 1,063 1.1/4" 1.1 1,57 1,45 3/4" - 148,7 0,34 1,4527 37,3 1,0630,34 1.1/16” 8,7 27 32 1,260 1,063 1.1/16" 1.1/4” 32 1,260 1.1 12 3/4" - 148,7 36,8 FN12 1,45 36,8 0,34 1,4527 8,7 27 1,0630,34 1.1/16” 1,063 1.1/16" 32 1,260 32 1,260 1.1/4” 1.1 10,5 1,260 40 40 1" - 11.1/2 1,57 10,5 40 0,41 1,57 32 0,8660,27 7/8”22 6,9 7/8” 0,866 0,41 1,260 27 1,063 1.1/16” 7/8" 27 1,063 1.1/4" 0,866 38 1,50 1.1/2" 32 1.1/4” 38 1.1/4" 1,496 38 1.1/2” 1,496 Nut type FN11 i 3/ 5,7 22 3/4” [mm] 19 7/8” 7/8" 0,748 0,94 0,27 0,27 [in] CH 4,2 3/4" 0,8660,17 22 22 0,866 22 0,877/8”19 7/8" 0,748 0,87 1,04 22 inin 3/4" [in] 26,5 0,22 [in] 0,75 0,27 22 29 10,5 1,14 0,41 16 1,14 1/2" - 146,9 4,2 CH CH FN12 NUT TYPE TIPO DI DADO HUTTER TYP TIPO DE TUERCA © Intertraco (Italia) S.p.A. All rights are reserved - 107 B Series Catalogue_Rev00.2007.xls Pagina 68 di 85 1.1 1.1 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES FGR10B FEMALE GREASE FEMALE GREASE B ES FEMMINA FISSA SPL-PTF INGRASSATORE T Innengewinde-Armatur für Fettschmierung HEMBRA ENGRASADORA A FGR10B CODE CODICE CODICE BEST.-NR CODIGO FEMALE GREASE Ø HOSE Ø TUBO HOSEØBORE SCHLAUCH Ø MANGUERA DN INCH SIZE FGR10B-04-08 6 DN 1/4"INCH04 FGR10B-06-08 FGR10B-04-08 10 6 FGR10B-06-08 10 3/8"1/4” 06 3/8” T T A A B B [mm] [in] [mm] [in] 22,5 [mm] 0,89 [in] 7,72 [mm] 17 0,30 [in] 0,67 [mm] 11/16" 1/2" - 27 1/2” - 27 22,5 22,5 0,89 04 7,72 0,89 0,30 7,72 17 0,67 0,30 11/16" 17 0,669 11/16” 06 0,89 7,72 0,30 17 0,669 11/16” SIZE 1/2" - 27 1/2” - 27 22,5 108 - © Intertraco (Italia) S.p.A. All rights are reserved [mm] ES ES [in] inin [in] [in] B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES FT11B JIs JIS FEMALE SWIVEL (60° CONE TOYOTA STYLE) CH FEMMINA GAS CONO 60° STILE TOYOTA T ES Dichtkopf JIS (60° KONUS Toyota-TYP) A FT11B CODICE CODE CODICE BEST.-NR FT11B-06-06 CODIGO FT11B-04-04 HEMBRA GIRATORIA RECTA JIS CONO 60° ESTILO TOYOTA B JIS FEMALE SWIVEL (TOYOTA) HOSE BORE Ø HOSE ØINCH TUBOSIZE Ø SCHLAUCH 6 1/4" 04 Ø MANGUERA DN 10 3/8" A T T 1/4" - 19 06 3/8" -19 08 1/2" - 14 1/4” 3/4" 1204 1/4” 3/4" - 14- 1" 3/8” 1606 1"3/8” - 11 12 1/2” 08 1/2” - 14 FT11B-12-12 19 3/4” 12 FT11B-16-16 25 1” 16 FT11B-08-08 DN 12 INCH 1/2" FT11B-04-04 FT11B-12-12 6 19 FT11B-16-16 FT11B-06-06 25 10 FT11B-08-08 SIZE B [mm] [in] [mm] 21 0,83 8 22 A 0,87 [mm] [in] 24,9 0,98 9,5 [mm] 11 ES [in] [mm] [in] 0,31 19 0,75 0,37 19 0,75 0,43 22 B [in] CH inin [mm] [in] inin 3/4" 19 0,75 3/4" 22 0,87 7/8" ES 3/4" [mm]0,87 [in]7/8" [in] 27 CH [mm]1.1/16"[in] 1,06 [in] 19 2128 0,83 1,10 8 12,5 0,31 30 0,49 19 1,180,748 1.3/16" 3/4” 32 0,748 1,2619 1.1/4" 3/4” -19 2229 1,14 0,87 14 9,5 0,55 0,37 32 1.1/4" 19 1,260,748 38 3/4” 1,5022 1.1/2" 0,866 7/8” 24,9 0,98 11 0,43 22 0,866 7/8” 3/4” - 14 28 1,10 12,5 0,49 30 1” - 11 32,5 1,28 14 0,55 32 27 1,063 1.1/16” 1,181 1.3/16” 32 1,260 1.1/4” 1,260 38 1,496 1.1/2” 1.1/4” B Series Catalogue_Rev00.2007.xls The document is exclusive property of INTERTRACO S.p.A.. All rights are reserved. Pagina 70 di 85 © Intertraco (Italia) S.p.A. All rights are reserved - 109 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES FK11B JIS KOMATSU STYLE FEMALE SWIVEL 60° CONE CH FEMMINA METRICA DIRITTA STILE KOMATSU CONO 60° T ES Komatsu-Typ metrisches Gewinde 60° KONUS A FK11B CODICE CODE CODICE BEST.-NR FK11B-04-14 CODIGO FK11B-04-12 HEMBRA GIRATORIA RECTA CONO 60° ESTILO KOMATSU B KOMATSU STYLE FEMALE SWIVEL HOSE BORE Ø HOSE ØINCH TUBOSIZE Ø SCHLAUCH 6 1/4" 04 Ø MANGUERA DN [in] [mm] 22,5 0,89 8,7 A T M12X1,5 INCH 1/4" 04 M14X1,5 FK11B-04-12 FK11B-06-14 6 10 1/4” 3/8" 0604 M12X1,5 M14X1,5 2325 FK11B-06-16 FK11B-04-14 10 6 3/8" 1/4” 0604 M16X1,5 M14X1,5 2423,2 FK11B-06-18 10 3/8" 06 M18X1,5 FK11B-06-20 10 3/8" 06 M20X1,5 FK11B-04-18 6 1/4” FK11B-06-14 FK11B-06-22 10 10 3/8” 3/8" FK11B-08-18 FK11B-06-16 10 3/8” FK11B-08-22 12 SIZE 04 0606 06 24 [mm] M18X1,5 M14X1,5 M22X1,5 M16X1,5 3/4" 3/8” 1206 M30X1,5 M22X1,5 FK11B-12-33 19 3/4" 12 M33X1,5 1" 16 M33X1,5 1" 16 M36X1,5 12 25 1/2” FK11B-08-22 12 1/2” FK11B-08-24 FK11B-20-36 12 1/2” FK11B-24-42 FK11B-10-24 16 FK11B-12-30 08 3/4" [mm] [in] [in] 3/4” 0,94 11,5 0,45 19 1,00 11,2 0,44 19 0,94 0,91 1,06 0,94 1,12 11,5 10 14 0,45 0,39 19 0,55 9,3 0,37 0,75 19 0,75 3/4" 0,748 3/4" 22 3/4” 24 0,94 15/16" 27 1,06 1.1/16" 3/4” 190,75 0,748 3/4" 3/4” 27 19 3/4” 0,55 22 15,1 0,59 24 15,1 0,59 24 190,94 0,748 3/4” 15/16" 32 18,3 14 0,72 0,55 30 1.3/16" 3/4” 36 191,18 0,748 11,5 11,2 0,45 0,44 1,27 0,89 21,3 11,5 0,84 41 34,2 1,35 21,3 0,84 32 1,41 20 0,79 41 1,06 08 M24X1,5 28,4 1,12 15,1 5/8” 10 M24X1,5 28,4 1,12 19 3/4” 12 M30X1,5 33,2 FK11B-12-33 19 3/4” 12 M33X1,5 FK11B-16-33 25 1” 16 FK11B-16-36 25 1” FK12B-24-42 38 1.1/2” 0,55 19 0,94 1,61 19 1,26 7/8" 0,748 15/16" 24 0,944 0,748 1,0619 1.1/16" 22 0,866 27 1,06 1.1/16" 32 1,26 1.1/4" 1,26 1.1/4" 3/4” 24 27 0,945 3/4” 7/8” 15/16” 1,063 1.1/16” 1,4227 1.7/16" 1,063 1.1/16” 15/16” 1.5/8" 32 3/4” 1,26 1.1/4" 1.1/4" 41 1,61 1.5/8" 46 1,81 1.13/16" 0,748 15/16” 24 0,866 7/8” 0,59 24 0,944 15/16” 32 1,260 1.1/4” 15,1 0,59 24 0,944 15/16” 32 1,260 1.1/4” 1,31 18,3 0,72 30 1,181 1.3/16” 36 1,417 1.7/16” 32,2 1,27 21,3 0,84 32 1,260 1.1/4” 41 1,614 1.5/8” M33X1,5 34,2 1,35 21,3 0,84 32 1,260 1.1/4” 41 1,614 1.5/8” 16 M36X1,5 35,7 1,41 20 0,79 41 1,614 1.5/8” 46 1,811 1.13/16” 24 M42X1,5 45 1,77 18,8 0,74 50 1,969 2” 55 2,165 2.3/16” 1,61 1.5/8" B Series Catalogue_Rev00.2007.xls The document is exclusive property of INTERTRACO S.p.A.. All rights are reserved. 110 - © Intertraco (Italia) S.p.A. All rights are reserved 27 0,945 22 35,7 14 0,45 0,87 0,748 14 27 25 0,75 [in] 11/16” 32,2 22,5 19 3/4"0,669 M22X1,5 FK11B-16-36 08 M18X1,5 3/4" [in] CH 7/8"0,748 33,2 1,00 1,31 25,5 19 10 11/16" 0,7517 25,3 1,00 28,4 1,12 FK11B-12-30 FK11B-06-22 0,75 [mm] 0,67 0,8719 M20X1,5 06 19 [in] 17 3/4" 190,75 0,748 M24X1,5 3/8” 5/8" 28,4 0,39 inin 9/16" ES 140,75 0,551 3/4" 9/16” 19 10 10 16 24 0,55 [in] 0,34 19 0,39 M24X1,5 M18X1,5 14 [mm] 0,37 0,39 19 08 06 27 0,34 B CH inin 8,7 10 2525,5 0,98 1,00 23,2 [in] 9,3 10 1/2" FK11B-06-20 FK11B-10-24 FK11B-16-33 25,3 [mm] 0,91 0,94 M22X1,5 3/8” FK11B-08-18 24 10 [mm] ES [in] 0,98 08 10 12 24 0,94 [in] 1/2" FK11B-06-18 FK11B-08-24 B [mm] DN FK11B-04-18 6 A T Pagina 71 di 85 1,063 1.1/16” ➔ INCH SIZE 6 1/4" 04 [mm] [in] [mm] [in] [mm] [in] inin [mm] [in] 22,5 0,89 8,7 0,34 14 0,551 9/16" 17 0,669 11/1 TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES 1/4"UNIVERSALE 04 M18X1,5 0,94 11,5 0,45 19 0,748 3/4" 24 0,945 RACCORDIFK11B-04-18 A PRESSARE -6 SERIE PER TUBI24TRECCIATI E 4 SPIRALI 10 3/8" 06FÜR GEFLECHT M14X1,5 10 0,39 19 0,748 3/4" 19 0,748 FK11B-06-14 UNIVERSALSERIE PRESSARMATUREN -25UND 0,98 SPIRALSCHLÄUCHE 10 3/8" 06 M16X1,5 23,2 0,91 9,3 0,37 19 0,748 3/4" 22 0,866 FK11B-06-16 RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES 3/4 FK11B-04-12 B DN FK11B-04-14 6 1/4" 04 M12X1,5 M14X1,5 24 0,94 10 0,39 19 0,748 3/4" 19 0,748 inin 15/1 3/4 7/8 FK11B-06-18 10 3/8" 06 M18X1,5 24 0,94 11,5 FK11B-06-20 10 3/8" 06 M20X1,5 25,3 1,00 11,2 0,44 19 0,748 3/4" 27 1,063 1.1/1 FK11B-06-22 10 3/8" 06 M22X1,5 25,5 1,00 14 0,55 19 0,748 3/4" 27 1,063 1.1/1 FK11B-08-18 12 1/2" 08 M18X1,5 22,5 0,89 11,5 0,45 19 0,748 3/4" 24 0,945 15/1 FK11B-08-22 12 1/2" 08 M22X1,5 27 1,06 14 0,55 22 0,866 7/8" 27 1,063 1.1/1 FK11B-08-24 12 1/2" 08 M24X1,5 28,4 1,12 15,1 0,59 24 0,945 15/16" 32 1,260 1.1/4 FK11B-10-24 16 5/8" 10 M24X1,5 28,4 1,12 15,1 0,59 24 0,945 15/16" 32 1,260 1.1/4 FK11B-12-30 19 3/4" 12 M30X1,5 33,2 1,31 18,3 0,72 30 1,181 1.3/16" 36 1,417 1.7/1 FK11B-12-33 19 3/4" 12 M33X1,5 32,2 1,27 21,3 0,84 32 1,260 1.1/4" 41 1,614 1.5/8 FK11B-16-33 25 1" 16 M33X1,5 34,2 1,35 21,3 0,84 32 1,260 1.1/4" 41 1,614 1.5/8 FK11B-16-36 25 1" 16 M36X1,5 35,7 1,41 20 0,79 41 1,614 1.5/8" 46 1,811 1.13/1 FK12B-24-42 38 1.1/2" 24 M42X1,5 45 1,77 18,8 0,74 50 1,969 2" 55 2,165 0,45 19 0,748 3/4" 24 0,945 15/1 2.3/1 Nut type FK11 FK12 NUT TYPE TIPO DI DADO HUTTER TYP TIPO DE TUERCA B Series Catalogue_Rev02.2007.xls The document is exclusive property of INTERTRACO S.p.A.. All rights are reserved. © Intertraco (Italia) S.p.A. All rights are reserved - 111 Pagina 79 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES FK41B JIs KOMATSU STYLE FEMALE SWIVEL 60° CONE - 45° ELBOW A CH D FEMMINA METRICA 45° STILE KOMATSU CONO 60° T Komatsu-Typ 45° metrisches Gewinde 60° KONUS B HEMBRA GIRATORIA A 45° CONO 60° ESTILO KOMATSU FK41B CODE CODICE CODICE BEST.-NR FK41B-04-14 KOMATSU STYLE FEMALE SWIVEL - 45° ELBOW HOSE HOSE Ø BORE Ø TUBO SIZE Ø SCHLAUCH 1/4" 04 Ø MANGUERA DN 6 CODIGO FK41B-06-18 10 3/8" FK41B-08-22 12 1/2" FK41B-10-24 16 FK41B-04-14 FK41B-06-18 FK41B-12-30 DN 6 5/8" A T INCH M14X1,5 T M18X1,5 INCH06 SIZE 08 1/4” 10 19 10 3/4" 3/8” 12 [mm] [in]A 42,5 1,67 51,5 M22X1,5 54 M24X1,5 69 04 M14X1,5 06 M30X1,5M18X1,5 81,5 B [mm] [in] B[mm] 10 0,39 16 2,03 11,5 [mm] [in] 2,13 42,5 2,72 D [mm] [in] inin 0,63 19 0,748 3/4" [mm]24 0,9449 [in] 15/16" [mm] 1,063 1.1/16" 1,2598 1.1/4" 19 0,748 3/4” 0,77 1,4173 24 1.7/16" 0,945 15/16” 19,5 0,77 0,55 20 0,79 15,1 0,59 27 1,06 51,5 3,21 2,03 18,3 10 11,5 0,72 [in] 0,39 CH [in] 14 1,67 0,45 [mm] D 16 27 32 0,45 1,1119,536 28,3 0,63 CH [in] [in] FK41B-08-22 12 1/2” 08 M22X1,5 54 2,13 14 0,55 20 0,79 27 1,063 1.1/16” FK41B-10-24 16 5/8” 10 M24X1,5 69 2,72 15,1 0,59 27 1,06 32 1,260 1.1/4” FK41B-12-30 19 3/4” 12 M30X1,5 81,5 3,21 18,3 0,72 28,3 1,11 36 1,417 1.7/16” B Series Catalogue_Rev00.2007.xls The document is exclusive property INTERTRACO S.p.A.. All rights are reserved. 112 - © Intertraco (Italia) S.p.A. All rights areofreserved Pagina 72 di 85 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES FK91B JIS KOMATSU STYLE FEMALE SWIVEL 60° CONE - 90° ELBOW A D FEMMINA METRICA 90° STILE KOMATSU CONO 60° B Komatsu-Typ 90° metrisches Gewinde 60° KONUS T FK91B CODICE CODE CODICE FK91B-04-16 BEST.-NR FK91B-06-18 CODIGO KOMATSU STYLE FEMALE SWIVEL - 90° ELBOW HOSE BORE DN FK91B-04-14 6 6 10 A T ØSIZE HOSE TUBOM14X1,5 1/4" Ø04 Ø SCHLAUCH 1/4" 04 M14X1,5 Ø MANGUERA INCH 3/8" 12 DN 1/2" FK91B-12-30 FK91B-04-1419 3/4" FK91B-04-16 FK91B-08-22 HEMBRA GIRATORIA A 90° CONO 60° ESTILO KOMATSU CH 06 M18X1,5 [mm] 29 1,14 10 29,5 1,16 9,3 35,5 1,40 38 1,87 [mm] 14 0,45 47,5 0,55 43 59,7 2,35 18,3 0,72 58,8 1/4” M30X1,5 04 M14X1,5 6 1/4” 04 M16X1,5 FK91B-06-18 10 3/8” 06 FK91B-08-22 12 1/2” FK91B-12-30 19 3/4” 6 12 D [in] T INCH M22X1,5 SIZE 08 B [mm] 11,5 CH [in] [mm] [in] 0,39 31,5 1,24 0,37 37 1,46 A [in] 1,50 [mm] 1,69 [in] inin 19 0,748 3/4" 22 0,8661 7/8" 24 0,9449 15/16" [in] 27 36 D CH [mm] 1.1/16" [in] 1,063 [mm] [in] [in] 1,14 10 0,39 1,4173 1.7/16" 31,5 1,24 19 0,748 3/4” 29,5 1,16 9,3 0,37 37 1,46 22 0,866 7/8” M18X1,5 35,5 1,40 11,5 0,45 38 1,50 24 0,945 15/16” 08 M22X1,5 47,5 1,87 14 0,55 43 1,69 27 1,063 1.1/16” 12 M30X1,5 59,7 2,35 18,3 0,72 58,8 2,31 36 1,417 1.7/16” 29 2,31 B [mm] B Series Catalogue_Rev00.2007.xls Pagina 73 di 85 The document is exclusive property of INTERTRACO S.p.A.. All rights are reserved. © Intertraco (Italia) S.p.A. All rights are reserved - 113 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES AK10B JIs KOMATSU STYLE STRAIGHT FLANGE (FOR METRIC O-RING) A C FLANGIA DIRITTA STILE KOMATSU (O-RING METRICO) Flanschbund Komatsu-Typ gerade BRIDA RECTA ESTILO KOMATSU (O-RING METRICO) AK10B CODICE CODE CODICE BEST.-NR AK10B-10-10 CODIGO AK10B-24-24 KOMATSU STYLE STRAIGHT FLANGE (FOR METRIC O-RING) HOSE BOREØ HOSE FLANGE Ø TUBO DN INCH SIZE Ø SCHLAUCH 16 5/8" 5/8" Ø10 MANGUERA A C [mm] [in] [mm] [in] 65 2,56 34,2 1,35 FLANGE A C 38 1.1/2" DN 24 INCH1.1/2" SIZE 91 3,58 60,3 2,37 [mm] [in] [mm] [in] AK10A-32-32 AK10B-10-10 51 2" 16 32 5/8” 10 125 5/8”4,92 71,4 2,81 65 2,56 34,2 1,35 AK10B-24-24 38 1.1/2” 24 1.1/2” 91 3,58 60,3 2,37 AK10B-32-32 51 2” 32 2” 125 4,92 71,4 2,81 114 - © Intertraco (Italia) S.p.A. All rights are reserved B Series Catalogue_Rev00.2007.xls Pagina 74 di 85 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES AK40B JIS KOMATSU STYLE - 45° ELBOW FLANGE (FOR METRIC O-RING) A FLANGIA 45° STILE KOMATSU (O-RING METRICO) D Flanschbund Komatsu-Typ 45° C BRIDA A 45° ESTILO KOMATSU (O-RING METRICO) AK40B KOMATSU STYLE - 45° ELBOW FLANGE (FOR METRIC O-RING) Ø HOSE Ø TUBO HOSE BORE Ø SCHLAUCH FLANGE FLANGE MANGUERA DN ØINCH SIZE [mm] [in] AK40B-10-10 16DN 5/8"INCH10 66,5 AK40B-24-24 AK40B-10-10 38 16 1.1/2"5/8”24 10 1.1/2" AK40A-32-32 AK40B-24-24 51 38 2"1.1/2” 32 24 1.1/2” AK40B-32-32 51 2” 32 2” CODE CODICE CODICE BEST.-NR CODIGO SIZE 5/8" 5/8” A A DC C [mm] [in] [mm] [in] D [mm] 2,62 [in] 1,35 34,2 [mm] 25 0,98 [mm] [in] 105 66,5 4,13 60,3 2,62 2,37 37 34,2 1,46 1,35 25 0,98 164 71,4 4,13 2,81 53 60,3 2,09 2,37 37 1,46 71,4 2,81 53 2,09 6,46 105 164 6,46 [in] © Intertraco (Italia) S.p.A. All rights are reserved - 115 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES AK90B JIS KOMATSU STYLE - 90° ELBOW FLANGE (FOR METRIC O-RING) A FLANGIA 90° STILE KOMATSU (O-RING METRICO) D Flanschbund Komatsu-Typ 90° BRIDA A 90° ESTILO KOMATSU (O-RING METRICO) C AK90B CODE CODICE BEST.-NR CODICE CODIGO Ø HOSE KOMATSU STYLE Ø TUBO Ø SCHLAUCH FLANGE Ø MANGUERA HOSE BORE FLANGE DNDN INCHINCH SIZE SIZE AK90B-10-10 AK90B-10-10 16 16 5/8" 5/8”10 10 5/8" 5/8” AK90B-24-24 AK90B-24-24 38 24 1.1/2" 1.1/2” AK90A-32-32 51 AK90B-32-32 24 38 1.1/2" 1.1/2” 51 2" 2” 32 32 2” - 90° ELBOW FLANGE (FOR METRIC O-RING) A C A C D [in] [mm] [mm][in] [in] [mm] [mm] 60,5 60,5 2,38 34,2 2,38 1,35 55 34,2 110 60,3 4,33 140 5,51 [mm] 118 4,65 118 60,3 154 6,06 71,4 154 116 - © Intertraco (Italia) S.p.A. All rights are reserved 4,65 2,37 6,06 D 2,81 71,4 [in] [in] [mm] [in] 55 2,17 2,37 110 4,33 2,81 140 5,51 2,17 1,35 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES SAE 3000 CODE 61 AX10B SAE 3000 CODE 61 STRAIGHT FLANGE A FLANGIA DIRITTA SAE 3000 C SFL gerade AX10B CODICE CODE CODICE BEST.-NR AX10B-08-08 CODIGO AX10B-08-12 SAE 3000 CODE 61 STRAIGHT FLANGE HOSE BORE Ø HOSE FLANGE Ø TUBO DN INCH SIZE Ø SCHLAUCH 12 1/2" 1/2" Ø08 MANGUERA 12 1/2" DN 08 AX10B-10-12 AX10B-08-08 16 5/8" 12 10 1/2" 3/4" AX10B-12-12 19 3/4" 12 AX10B-12-16 19 3/4" 12 AX10B-12-20 19 3/4" 12 1" 16 AX10B-08-12 AX10B-10-12 BRIDA RECTA SAE 3000 PSI AX10B-12-12 25 AX10B-12-16 25 AX10B-16-20 12 16 1/2" 5/8" 3/4" 1" 1.1/4" SIZE 08 08 10 12 19 1" 3/4" 1" 16 3/4" 1.1/4" AX10B-20-20 AX10B-12-20 31 1.1/4" 19 20 3/4" 1.1/4" AX10B-20-24 AX10B-16-16 31 1.1/4" 25 20 AX10B-24-24 38 1.1/2" 24 AX10B-24-32 38 1.1/2" 24 AX10A-32-24 51 2" 32 1.1/4" 20 AX10B-20-24 51 AX10A-32-40 31 2" 32 1.1/4" AX10B-40-40 AX10B-24-20 63 2.1/2" 38 40 1.1/2"2.1/4" AX10B-16-16 AX10B-16-20 AX10B-20-16 AX10B-20-20 AX10A-32-32 19 INCH 3/4" 25 31 31 1" 1.1/2" 1.1/2" 1" 1.1/4" 2" A C A C [mm] [in] [mm] [in] 38 1,50 30 1,18 39 1,54 38 1,50 [mm] [in] [mm] [in] 39 1/2"1,54 38 1,50 38 1,50 30 1,18 39 1,54 38 1,50 39 1,54 38 1,50 44,5 39,5 1,75 1,56 38 1,50 FLANGE 39,5 46 47 1,56 38 1,81 44,5 1,85 50,8 3/4" 3/4" 1,50 1,75 2,00 47 3/4"1,85 47 1" 1,85 50,8 46 2,00 1,81 44,5 1,75 12 49,51.1/4" 1,95 50,8 2,00 47 1,85 50,8 2,00 16 53,5 1" 2,11 53 2,09 60,3 2,37 47 1,85 44,5 1,75 60,3 2,37 74,5 2,93 71,4 48 1,89 50,8 2,00 3,54 60,3 58,5 2,30 44,5 1,75 49,5 1,95 50,8 2,00 20 78,51.1/2" 3,09 84,1 53 3,31 2,09 60,3 2,37 24 901.1/4" 3,54 84,1 3,31 57,5 2,26 50,8 2,00 12 16 20 1.1/4" 90 1" 1.1/4" 2,81 2,37 AX10B-24-24 38 1.1/2" 24 1.1/2" 53 2,09 60,3 2,37 AX10B-24-32 38 1.1/2" 24 2" 74,5 2,93 71,4 2,81 AX10B-32-24 51 2" 32 1.1/2" 90 3,54 60,3 2,37 AX10B-32-32 51 2" 32 2" 78,5 3,09 71,4 2,81 AX10B-32-40 51 2" 32 2.1/4" 78,5 3,09 84,1 3,31 AX10B-40-40 63 2.1/2" 40 2.1/4" 90 3,54 84,1 3,31 AX10B-40-48 63 2.1/2" 40 2.1/2" 90 3,54 101,6 4,00 AX10B-48-48 76 3" 48 2.1/2" 91,5 3,60 101,6 4,00 © Intertraco (Italia) S.p.A. All rights are reserved - 117 B Series Catalogue_Rev00.2007.xls Pagina 77 di 85 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES SAE 3000 CODE 61 AX20B SAE 3000 CODE 61 - 22,5° ELBOW FLANGE A D FLANGIA 22,5° SAE 3000 SFL 22,5° BOGENARMATUR C BRIDA A 22,5° SAE 3000 PSI Ø HOSE Ø TUBO SAE 3000 CODE Ø SCHLAUCH FLANGE Ø MANGUERA CODE AX20B CODICE BEST.-NR CODIGO CODICE DNHOSE INCH BORE SIZE AX20B-24-24 INCH 24 SIZE 38DN 1.1/2" AX20B-24-32 AX20B-24-24 3838 1.1/2" 1.1/2" 2424 AX20B-32-32 AX20B-24-32 5138 AX20B-40-40 AX20B-32-32 6351 2.1/2" 2" 4032 AX20B-40-48 63 40 2" 1.1/2" 3224 2.1/2" 61 - 22,5° A ELBOW FLANGE C FLANGE [mm]A [in] C [mm] [in] D D [mm] [in] [mm] 99 [in]3,90 [mm] 60,3 [in] [mm] 2,37 [in] 16 0,63 2" 1.1/2" 99 99 3,903,90 60,3 71,4 2,37 2,81 16 0,6315,5 0,61 2"2" 133,3 99 3,905,25 71,4 71,4 2,81 2,81 15,5 0,6123 0,91 2.1/4" 2" 125 131 5,164,92 71,4 84,1 2,81 3,31 23 0,9118,7 0,74 2.1/2" 125 4,00 18,7 0,74 1.1/2" 118 - © Intertraco (Italia) S.p.A. All rights are reserved 4,92 101,6 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES SAE 3000 CODE 61 AX30B SAE 3000 CODE 61 - 30° ELBOW FLANGE A FLANGIA 30° SAE 3000 D SFL 30° Bogenarmatur C BRIDA A 30° SAE 3000 PSI Ø HOSE Ø TUBO SAE 3000 CODE Ø SCHLAUCH FLANGE Ø MANGUERA CODE AX30B CODICE BEST.-NR CODIGO CODICE DN HOSE INCH BORE SIZE [mm] A C [mm] [mm] [in] 2,37 [mm] 22,5 [in] 0,89 2" 1.1/2" 103 103 4,06 60,3 71,4 4,06 2,37 2,81 22,5 22,5 0,89 0,89 2"2" 104,3 103 4,11 71,4 71,4 4,06 2,81 2,81 22,5 0,8932 1,26 4032 2.1/4" 2" 134,4 138 5,29 71,4 84,1 5,43 2,81 3,31 32 27,7 1,26 1,09 40 2.1/2" 134,4 4,00 27,7 1,09 AX30B-24-32 AX30B-24-24 3838 1.1/2" 1.1/2" 2424 AX30B-32-32 AX30B-24-32 5138 AX30B-40-40 AX30B-32-32 6351 2.1/2" 2" AX30B-40-48 63 2" 1.1/2" 3224 FLANGE 1.1/2" 5,29 101,6 [in] D [in]4,06 [mm] 60,3 [in] 38DN 1.1/2" INCH 24 SIZE [in] D 103 [mm] AX30B-24-24 2.1/2" 61 - 30° AELBOW FLANGE C © Intertraco (Italia) S.p.A. All rights are reserved - 119 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES SAE 3000 CODE 61 AX40B SAE 3000 CODE 61 - 45° ELBOW FLANGE A FLANGIA 45° SAE 3000 D SFL 45° Bogenarmatur C BRIDA A 45° SAE 3000 PSI AX40B SAE 3000 CODE 61 - 45° ELBOW FLANGE Ø HOSE Ø TUBO HOSE BORE Ø SCHLAUCH FLANGE FLANGE MANGUERA DN ØINCH SIZE [mm] [in] AX40B-08-08 12DN 1/2"INCH08 SIZE 1/2" 66,5 [mm] 2,62 AX40B-08-12 AX40B-08-08 12 12 1/2" 1/2"08 08 3/4" 1/2" 60,5 2,38 55,2 AX40B-10-12 AX40B-08-12 16 12 5/8" 1/2"10 08 3/4" 3/4" 63 2,48 60,5 AX40B-12-12 19 AX40B-12-16 19 AX40B-16-16 25 AX40B-16-20 25 AX40B-16-16 AX40B-20-20 CODE CODICE CODICE BEST.-NR CODIGO AX40B-10-12 12 3/4" 5/8" 10 3/4" 12 3/4"16 1" 31 25 1.1/4" 1" 20 12 1.1/4" 16 1.1/4" AX40B-20-24 AX40B-16-20 31 25 1.1/4" 1" 20 16 1.1/2" AX40B-24-24 AX40B-20-20 38 31 1.1/2" 24 1.1/4" 20 1.1/2" AX40B-24-32 38 AX40A-32-32 51 AX40A-32-40 51 AX40B-12-12 AX40B-12-16 AX40B-20-24 AX40B-24-24 AX40B-24-32 16 3/4" 19 19 31 38 38 3/4" 1" 1" 12 16 1.1/2" 24 2" 32 2" 1.1/4" 20 1.1/2" 24 1.1/2" 24 32 1" 1" 2" 2" 2.1/2" 3/4" 3/4" A A 68,5 71,5 74 [in] 30 [in] 1,18 [mm] 24 0,94 [in] [mm] [in] 382,171,50 26 30 1,02 1,18 22,6 0,89 382,381,50 26,7 38 1,05 1,50 26,1 1,03 2,70 38 1,50 26,7 1,05 2,81 44,5 1,75 28,8 1,13 1,50 26,7 1,05 2,91 44,5 1,75 27 1,06 1,50 26,7 1,05 1,75 28,8 1,13 68 68,5 71,5 2,98 98 73,9 3,86 1.1/4" 90 1.1/4" 100 105 1.1/2" 1.1/2" 2" 140 168 [mm] [in] D [mm] 75,7 1" DC C 2,68 2,70 38 38 50,8 2,812,00 44,5 29 50,82,912,00 44,5 37 1,46 1,75 27 1,06 3,54 75,7 60,32,982,37 31 50,8 1,22 2,00 29 1,14 3,94 86 60,33,392,37 36,5 50,8 1,44 2,00 31 1,22 4,13 71,4 2,81 36,5 1,44 5,51 71,4 2,81 53 2,09 2,37 31 1,22 6,61 84,12 3,31 61 2,40 2,37 36,5 1,44 2,81 36,5 1,44 90 100 105 3,54 60,3 3,94 60,3 4,13 71,4 1,14 AX40B-32-24 51 2" 32 1.1/2" 122,3 4,81 60,3 2,37 36,6 1,44 AX40B-32-32 51 2" 32 2" 142,3 5,60 71,4 2,81 53 2,09 AX40B-32-40 51 2" 32 2.1/2" 168 6,61 84,1 3,31 61 2,40 AX40B-40-40 63 2.1/2" 40 2.1/4" 134,4 5,29 84,1 3,31 49 1,93 AX40B-40-48 63 2.1/2" 40 2.1/2" 134,4 5,29 101,6 4,00 49 1,93 AX40B-48-48 76 3" 48 2.1/2" 162,4 6,39 101,6 4,00 54,1 2,13 120 - © Intertraco (Italia) S.p.A. All rights are reserved B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES SAE 3000 CODE 61 AX60B SAE 3000 CODE 61 - 60° ELBOW FLANGE A FLANGIA 60° SAE 3000 D SFL 60° Bogenarmatur BRIDA A 60° SAE 3000 PSI C AX60B CODE CODICE BEST.-NR CODICE CODIGO AX60B-24-24 AX60B-24-24 AX60B-24-32 AX60B-24-32 AX60B-32-32 SAE 3000 CODE 61 - 60° ELBOW FLANGE Ø HOSE Ø TUBO Ø SCHLAUCH HOSE BORE FLANGE A Ø MANGUERA FLANGE [mm] DN INCH SIZE DN 1.1/2"INCH24 SIZE1.1/2" 38 1.1/2"24 3838 1.1/2" 5138 2"1.1/2" 32 24 24 114 2" 1.1/2" 112 2" 2" 155 A C [in] [mm] [mm] 4,49 60,3 4,41 114 71,4 6,10 112 71,4 C D [in] [in] 2,37 [mm] 52 [in] [mm] 2,05 4,49 55,5 60,3 2,81 2,19 4,41 76 71,4 2,81 2,99 D [in] [mm] [in] 2,37 52 2,05 2,81 55,5 2,19 AX60B-32-32 51 2" 32 2" 157,3 6,19 71,4 2,81 76 2,99 AX60B-40-40 63 2.1/2" 40 2.1/4" 138,3 5,44 84,1 3,31 73,4 2,89 AX60B-40-48 63 2.1/2" 40 2.1/2" 138,3 5,44 101,6 4,00 73,4 2,89 © Intertraco (Italia) S.p.A. All rights are reserved - 121 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES SAE 3000 CODE 61 AX70B SAE 3000 CODE 61 - 67,5° ELBOW FLANGE A FLANGIA 67,5° SAE 3000 SFL 67,5° Bogenarmatur D BRIDA A 67,5° SAE 3000 psi C AX70B CODE CODICE BEST.-NR CODICE CODIGO AX70B-24-24 AX70B-24-24 AX70B-24-32 AX70B-24-32 AX70B-32-32 SAE 3000 CODE 61 - 67,5° ELBOW FLANGE Ø HOSE Ø TUBO Ø SCHLAUCH FLANGE A HOSE BORE Ø MANGUERA FLANGE [mm] DN INCH SIZE DN INCH SIZE 38 38 38 38 51 1.1/2" 24 1.1/2" 24 1.1/2" 24 1.1/2" 2" 32 24 1.1/2" 2" 2" A C [in] 108,5 4,27 111 4,37 1.1/2" 2"153 [mm] [in] [mm] 60,3 2,37 59,5 71,4 2,81 63 [mm] 108,5 111 6,02 71,4 155,3 C D [in] 4,27 4,37 87,5 2,81 6,11 [in] D [mm] [in] [mm] [in] 60,3 2,37 59,5 2,34 71,4 3,44 2,81 63 2,48 71,4 2,81 87,5 3,44 2,34 2,48 AX70B-32-32 51 2" 32 2" AX70B-40-40 63 2.1/2" 40 2.1/4" 140,4 5,53 84,1 3,31 86,3 3,40 AX70B-40-48 63 2.1/2" 40 2.1/2" 140,4 5,53 101,6 4,00 86,3 3,40 122 - © Intertraco (Italia) S.p.A. All rights are reserved B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES SAE 3000 CODE 61 AX90B SAE 3000 CODE 61 - 90° ELBOW FLANGE A FLANGIA 90° SAE 3000 SFL 90° Bogenarmatur D BRIDA A 90° SAE 3000 psi C AX90B CODE CODICE BEST.-NR CODICE CODIGO Ø HOSE SAE Ø TUBO Ø SCHLAUCH Ø MANGUERA HOSE BORE 3000 CODE 61 - 90° ELBOW FLANGE FLANGE FLANGE DN DN INCH INCHSIZE SIZE A A C C D D [mm] [in] AX90B-06-08 AX90B-06-08 1010 3/8"3/8" 06 06 1/2" 1/2" 52 2,05 52 30,2 2,05 1,19 45 30 1,771,18 45 1,77 AX90B-08-08 AX90B-08-08 1212 1/2"1/2" 08 08 1/2" 1/2" 49,5 1,95 50 301,97 1,18 45 30 1,771,18 45 1,77 AX90B-08-12 AX90B-08-12 12 1/2" 08 3/4" 57,5 2,26 38 1,50 51 38 2,01 49,5 1,95 AX90B-10-12 16 5/8" 10 2,19 38 1,50 55 2,17 AX90B-12-12 19 3/4" 12 2,45 38 1,50 56,5 2,22 1,50 55 2,17 AX90B-12-16 19 3/4" 12 2,40 44,5 1,75 59,5 2,34 1,50 56,5 2,22 AX90B-12-20 19 3/4" 12 2,44 50,8 2,00 62 2,44 1,75 59,5 2,34 AX90B-16-12 25 1" 16 2,50 38 1,50 56,5 2,22 2,00 62 2,44 AX90B-10-12 AX90B-12-12 AX90B-12-16 AX90B-12-20 AX90B-16-12 AX90B-16-16 12 16 19 19 19 2525 1/2" 5/8" 3/4" 3/4" 3/4" 08 10 12 12 12 3/4" 3/4" 3/4" 1" 1.1/4" 3/4" 1" 1" 16 16 1" 1" 16 16 1.1/4" 1" 3/4" 3/4" 1" 1.1/4" [mm] [in] [mm] [mm] [in] [in] [mm] [mm] 49 55,5 55,5 62,2 62,2 61 61,2 62 62,2 63,5 1,93 2,19 2,45 2,41 2,45 3/4" 66,5 63,5 2,62 2,50 1,75 44,5 1" 74,5 69,5 2,93 38 38 44,5 50,8 [in] [in] 1,50 38 64 2,521,50 56,5 2,22 2,74 2,00 50,8 44,5 68 2,681,75 61 2,40 79,5 69,4 3,13 2,73 2,00 50,8 50,8 75 2,952,00 61 2,40 85 3,35 102 60,3 4,02 2,37 69,2 44,5 2,721,75 93 3,66 AX90B-16-16 AX90B-16-20 2525 AX90B-16-20 AX90B-20-20 3125 1.1/4"1" 20 16 1.1/4" 1.1/4" AX90B-20-24 AX90B-20-16 3131 1.1/4" 1.1/4"20 20 1.1/2" AX90B-24-20 AX90B-20-20 3831 1.1/2" 1.1/4"24 20 1.1/4" 1.1/4" 96 3,78 86,8 50,8 3,42 2,00 93 50,8 3,662,00 69,2 2,72 AX90B-24-24 AX90B-20-24 3831 1.1/2" 1.1/4"24 20 1.1/2" 1.1/2" 104 4,09 85 60,3 3,35 2,37 81 60,3 3,192,37 69,2 2,72 1.1/4" 104 4,09 60,3 2,37 150 50,8 5,91 69,2 2,72 4,02 71,4 2,81 85 3,35 5,12 71,4 2,81 123 4,84 2,37 81 3,19 5,12 71,4 2,81 123 4,84 2,81 85 3,35 5,21 71,4 2,81 203 7,99 2,37 123 4,84 5,94 84,12 3,31 132 5,20 2,81 123 4,84 AX90B-24-24-150 AX90B-24-20 38 1.1/2" 24 AX90B-24-32 38 1.1/2" 24 AX90A-32-24 51 2" 32 AX90A-32-32 51 2" 32 AX90A-32-32-203 51 2" AX90A-32-40 51 2" AX90B-24-24 AX90B-24-32 AX90B-32-24 AX90B-32-32 38 38 38 51 51 1.1/2" 24 1.1/2" 24 1.1/2" 24 2" 32 2" 32 32 32 1.1/2" 2" 2" 2" 2.1/2" 1" 1.1/2" 2" 1.1/2" 2" 91,5 102 104 130 102 130 132,3 151 130 132,3 3,60 4,09 4,02 5,12 5,21 60,3 71,4 60,3 71,4 2,00 AX90B-32-40 51 2" 32 2.1/2" 151 5,94 84,1 3,31 132 5,20 AX90B-40-40 63 2.1/2" 40 2.1/4" 136,2 5,36 84,1 3,31 125 4,92 AX90B-40-48 63 2.1/2" 40 2.1/2" 136,2 5,36 101,6 4,00 125 4,92 AX90B-48-48 76 3" 48 2.1/2" 171,8 6,76 101,6 4,00 140 5,51 © Intertraco (Italia) S.p.A. All rights are reserved - 123 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES SAE 3000 CODE 61 AX90B-L SAE 3000 CODE 61 - 90° ELBOW FLANGE (LONG DROP) A FLANGIA 90° SAE 3000 (VERSIONE ALTA) SFL 90° Bogenarmatur Sonder- SL D BRIDA A 90° SAE 3000 psi (CODO LARGO) C Ø HOSE SAE 3000 CODE 61 - 90° ELBOW FLANGE (LONG DROP) Ø TUBO AX90B-L CODE CODICE BEST.-NR CODIGO CODICE Ø SCHLAUCH Ø MANGUERA HOSE BORE FLANGE FLANGE DN DNINCH INCH SIZE SIZE A A D [in][in] [mm] [mm] [in] D [in] [mm] [in] AX90B-24-24-150 38 1.1/2” 24 1.1/2” 104 4,09 60,3 2,37 150 5,91 AX90B-32-32-203 51 2” 32 2” 132,3 5,21 71,4 2,81 203 7,99 [mm] [in] [mm] [mm] C C 124 - © Intertraco (Italia) S.p.A. All rights are reserved B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES SAE 6000 CODE 62 AY10B SAE 6000 CODE 62 STRAIGHT FLANGE A FLANGIA DIRITTA SAE 6000 C SFS gerade AY10B CODICE CODE CODICE BEST.-NR AY10B-08-08 CODIGO AY10B-08-12 SAE 6000 CODE 62 STRAIGHT FLANGE HOSE BOREØ HOSE FLANGE Ø TUBO DN INCH SIZE Ø SCHLAUCH 12 1/2" Ø 08 1/2" MANGUERA 12 AY10B-10-08 AY10B-08-08 1/2" DN 08 12 16 5/8" 10 AY10B-12-12 19 3/4" 12 AY10B-12-16 19 3/4" 12 AY10B-10-08 AY10B-10-12 25 AY10B-12-12 25 AY10B-16-20 AY10B-16-16 12 16 16 1" 19 1" INCH 3/4" 1/2” AY10B-10-12 AY10B-08-12 1/2” 5/8” 3/4" 3/4" 1" 1.1/4" 19 20 3/4” 1.1/4" 31 1.1/4" 25 20 AY10B-24-24 38 1.1/2" 24 AY10B-24-32 38 1.1/2" 24 AY10A-32-32 51 2" 32 AY10B-20-24 31 31 10 5/8” 1" 10 16 3/4” 1.1/4" 12 31 AY10B-20-20 08 16 AY10B-20-24 AY10B-16-16 25 SIZE A 1” 1.1/2" 1.1/2" 1” 1.1/4” 1.1/4” 2" 2" C A C [mm] [in] [mm] [in] 38 1,50 31,7 1,25 43 1,69 41,3 1,63 [mm] [in] [mm] [in] 38 1,49 31,7 1,25 43 1,69 41,3 1,63 42,5 1,67 31,7 1,25 FLANGE 08 AY10B-20-20 AY10B-12-16 AY10B-16-20 BRIDA RECTA SAE 6000 psi 1/2” 43 1,69 41,3 43,5 1,71 41,3 58,5 2,30 47,6 3/4” 1/2” 60 3/4”2,36 66,53/4”2,62 1,63 1,63 1,87 47,6 43 1,87 1,69 41,3 1,63 54 43,5 2,13 1,71 41,3 1,63 12 70 1” 2,76 54 2,13 59 2,32 47,6 1,87 16 76 1” 2,99 76 2,99 63,5 2,50 60 2,36 47,6 1,87 63,5 2,50 78 3,07 79,4 67 2,64 54 2,13 88,5 3,48 79,4 70 2,76 54 2,13 76 2,99 63,5 2,50 16 20 20 1.1/4” 1.1/4” 1.1/2” 3,13 3,13 AY10B-24-24 38 1.1/2” 24 1.1/2” 76 2,99 63,5 2,50 AY10B-24-32 38 1.1/2” 24 2” 78 3,07 79,4 3,13 AY10B-32-32 51 2” 32 2” 88,5 3,48 79,4 3,13 © Intertraco (Italia) S.p.A. All rights are reserved - 125 B Series Catalogue_Rev00.2007.xls Pagina 80 di 85 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES SAE 6000 CODE 62 AY40B SAE 6000 CODE 62 - 45° ELBOW FLANGE A FLANGIA 45° SAE 6000 SFS 45° Bogenarmatur C D BRIDA A 45° SAE 6000 psi CODE CODICE AY40B BEST.-NR CODIGO AY40B-08-08 CODICE Ø HOSE Ø TUBO Ø SCHLAUCH SAE Ø MANGUERA DN INCH A SIZE 12 HOSE 1/2” BORE 08 AY40B-08-08 AY40B-10-08 12DN 1612 INCH 08 SIZE 1/2” 1/2" 1008 5/8” AY40B-08-12 AY40B-10-12 1612 1/2" 5/8” AY40B-10-08 AY40B-12-12 19 AY40B-10-12 AY40B-12-16 C D FLANGECODE 62 - 45° ELBOW FLANGE 6000 [mm] 1/2” FLANGE [in] A 2,20 56 [mm] 31,7 C [in] [mm] D 23,3 1,25 3/4” 1/2" 1/2” 66,5 [mm] 2,62[in] 56 2,762,20 70 [mm] 41,3 31,7 31,7 1,63 [mm] 30 [in] 1,25 1,25 23,3 24,80,92 1,18 1008 3/4" 3/4” 69 66,5 2,722,62 41,3 41,3 1,63 1,63 1,14 3/4” 12 3/4” 71,5 1916 5/8" 3/4” 1210 3/4" 1” AY40B-12-12 AY40B-16-16 2519 3/4" 1” 1612 3/4" 1” AY40B-12-16 AY40B-16-20 2519 3/4" 1“ 1612 1" 1.1/4“ 94,5 AY40B-16-16 AY40B-20-20 1" 3125 1.1/4“ 2016 AY40B-16-20 AY40B-20-24 1" 3125 1.1/4” AY40B-08-12 2,81 41,3 [in] [in] 0,92 30 1,63 29 1,18 29,5 1,16 68,5 2,992,70 41,3 47,6 1,63 1,87 34 1,06 1,34 81,5 71,5 3,212,81 41,3 47,6 1,63 1,87 29,5 31 1,16 1,22 76 3,722,99 47,6 54 1,87 2,13 34 39 1,34 1,54 1" 1.1/4“ 113,7 81,5 4,483,21 47,6 54 1,87 2,13 31 43,81,22 1,72 2016 1.1/4" 1.1/2” 115 94,5 4,533,72 54 63,5 2,13 2,50 39 48 1,54 1,89 AY40B-20-20 AY40B-24-24 1.1/4" 2420 3831 1.1/2“ 1.1/4" 1.1/2“ 126 113,74,964,48 54 63,5 2,13 2,50 43,8 47 1,72 1,85 AY40B-24-32 AY40B-20-24 3831 1.1/2“ 1.1/4" 2420 2“ 1.1/2" 133,8 117 5,274,61 79,4 63,5 3,13 2,50 48 58 1,89 2,28 AY40B-32-32 AY40B-24-24 5138 2“ 1.1/2" 79,4 63,5 3,13 2,50 50 61 1,97 2,40 AY40B-24-32 38 1.1/2" 24 2" 130 5,12 79,4 3,13 60 2,36 AY40A-32-32 51 2" 32 2" 170 6,69 79,4 3,13 60 2,36 2“ 1.1/2" 3224 76 169 126 - © Intertraco (Italia) S.p.A. All rights are reserved 124 6,654,88 27 0,98 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES SAE 6000 CODE 62 AY90B SAE 6000 CODE 62 - 90° ELBOW FLANGE A FLANGIA 90° SAE 6000 SFS 90° Bogenarmatur D BRIDA A 90° SAE 6000 psi C AY90B CODE CODICE BEST.-NR CODICE CODIGO Ø HOSE SAE 6000 CODE 62 - 90° ELBOW FLANGE Ø TUBO A C Ø SCHLAUCH FLANGE Ø MANGUERA HOSE BORE A C D FLANGE [mm] [mm] [in] [mm][in] [in] [mm] DN DNINCHINCH SIZE SIZE [mm] [in] [in] D [mm] [in] AY90B-08-08 AY90B-08-08 12 12 1/2" 1/2”08 08 1/2" 1/2” 48,7 1,92 48,7 31,71,921,25 47 1,85 1,25 31,7 47 1,85 AY90B-08-12 12 12 1/2" 1/2”08 08 3/4" 3/4” 50,5 1,99 50,5 41,3 1,991,63 56 2,20 41,3 1,63 56 2,20 16 5/8” 10 1/2” 31,7 1,25 52 2,05 10 2,11 2,17 5/8” 53,5 2,11 41,3 1,63 58 2,28 47,6 60,5 2,38 1,87 66 2,60 60,5 2,38 65 2,56 1,87 66 2,60 2,13 79,5 3,13 AY90B-08-12 AY90B-10-08 AY90B-10-08 AY90B-10-12 AY90B-10-12 16 AY90B-10-16 16 5/8" 10 3/4" 3/4” 55 53,5 41,3 1,63 58 2,28 AY90B-10-16 AY90B-12-12 19 16 3/4" 5/8”12 10 3/4" 1/2” 62,5 57,5 2,46 41,32,261,63 AY90B-12-12 AY90B-12-16 19 19 3/4" 3/4”12 12 1" 3/4” 62,5 62,5 2,46 47,62,461,87 41,3 65 2,56 1,63 AY90B-16-16 AY90B-12-16 25 19 1" 3/4”16 1" 1” 75,5 2,97 62,5 47,62,461,87 66 47,6 2,60 1,87 AY90B-16-20 25 73,5 2,89 54 77 3,03 AY90B-20-20 31 101,7 4,00 54 2,13 86 3,39 AY90B-20-24 31 96 3,78 63,5 2,50 97 3,82 AY90B-24-24 38 4,37 63,5 2,50 104 4,09 2,13 86 3,39 AY90B-20-24 AY90B-24-32 AY90A-32-32 AY90B-24-24 AY90B-16-16 AY90B-16-20 AY90B-20-20 25 1" 1” 1.1/4" 16 20 25 1” 31 1.1/4” 1.1/4" 20 12 16 16 1.1/4" 1.1/4" 1.1/2" 1” 1.1/4” 75,5 78 2,97 3,07 54 1.1/4” 38 311.1/2"1.1/4” 24 20 2" 1.1/2” 105 102,3 4,13 79,44,033,13 63,5 120 4,72 2,50 98 3,86 51 38 2" 1.1/2” 32 24 2" 1.1/2” 151,3 5,96 111 79,44,373,13 134 63,5 5,28 2,50 104 4,09 24 1.1/2" 111 4,00 47,6 20 1.1/2" 101,7 2,13 54 AY90B-24-32 38 1.1/2” 24 2” 113 4,45 79,4 3,13 119,5 4,70 AY90B-32-32 51 2” 32 2” 151,3 5,96 79,4 3,13 134 5,28 © Intertraco (Italia) S.p.A. All rights are reserved - 127 B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES ST11B STAPLE LOCK STAPLE LOCK MALE E C RACCORDO MASCHIO PER MINIERA (STAPLE) Dichtkopf “STAPLE LOCK” MACHO FIJO PARA MINIERA (STAPLE) A Ø HOSE Ø TUBO Ø STAPLE SCHLAUCH Ø MANGUERA CODE CODICE ST11B BEST.-NR CODIGO CODICE ST11B-04-04 ST11B-04-06 ST11B-04-04 6 ST11B-04-06 6 ST11B-06-06 10 ST11B-08-08 12 ST11B-10-10 16 ST11B-06-06 ST11B-08-08 ST11B-10-10 ST11B-12-12 ST11B-16-16 ST11A-32-32 C DN INCH SIZE [mm] [in] [mm] 6 1/4” 04 35,5 1,40 14,9 1/4” 04 3/8” 04 1/2” 06 5/8” 08 3/4” 10 1” 04 34,5 06 34,5 08 35 10 36 12 35,5 16 43,5 HOSE BORE DN A LOCK MALE INCH 6 1/4" 10 1/4" 12 3/8" 16 1/2" 19 5/8" 25 SIZE A [mm] 1,36 35,5 1,36 34,5 1,38 34,5 1,42 30 1,40 31 1,71 [in] [mm] 19,9 1,40 14,9 19,9 1,36 19,9 23,9 1,36 19,9 25,9 1,18 23,9 28,9 1,22 25,9 38,8 E C [in] [mm] [in] 0,59 9,92 0,39 [in] 0,78 0,59 0,78 0,78 0,94 0,78 1,02 0,94 1,14 1,02 1,53 E [mm] 13,9 9,92 13,9 13,9 17,9 13,9 20,9 17,9 23,9 20,9 30,9 [in] 0,39 0,55 0,55 0,70 0,82 0,55 0,55 0,70 0,82 0,94 1,22 ST11B-20-20 31 1.1/4” 20 47 1,85 45,9 1,81 37,9 1,49 ST11B-24-24 38 1.1/2” 24 51 2,01 54,9 2,16 46,9 1,85 ST11B-32-32 51 2” 32 57 2,24 63,9 2,52 55,9 2,20 ST11B-40-40 63 2.1/2” 40 100,5 3,96 80,9 3,19 79 3,11 ST11B-40-40 128 - © Intertraco (Italia) S.p.A. All rights are reserved B TWO PIECE SWAGED FITTINGS UNIVERSAL SERIES FOR WIRE BRAIDED AND 4 SPIRAL HYDRAULIC HOSES RACCORDI A PRESSARE - SERIE UNIVERSALE PER TUBI TRECCIATI E 4 SPIRALI PRESSARMATUREN UNIVERSALSERIE FÜR GEFLECHT - UND SPIRALSCHLÄUCHE RACORES A PRENSAR SERIE UNIVERSAL PARA MANGUERA DE UNA O DOS MALLAS Y 4 ESPIRALES WO10B BRAZING TAIL INSERTO A SALDARE C Lötfussteil ESPIGA PARA SOLDADURA A WO10B BRAZING TAIL CODE CODICE HOSE BORE CODICE BEST.-NR DN INCH SIZE CODIGO Ø HOSE Ø TUBO A Ø SCHLAUCH Ø MANGUERA [mm] A C [in] [mm] C [in] 04 DN INCH 14,5 0,57SIZE6,5 [mm] 0,26 [in] [mm] [in] WO10B-04-04 10 3/8" WO10B-06-06 06 6 1/4” 10,5 0,41 04 9,55 14,5 0,38 0,57 6,5 0,26 12 1/2" WO10B-08-08 WO10B-06-06 08 10 17 3/8” 0,67 0612,85 0,51 16,5 0,65 9,55 0,38 16 5/8" WO10B-10-10 WO10B-08-08 10 12 17 0,67 16 0,63 0,67 12,85 0,51 WO10B-12-12 19 3/4" 12 18,5 0,73 19,2 0,76 WO10B-16-16 25 1" 16 22,5 0,89 25,6 1,01 17 0,67 16 0,63 18,5 0,73 19,2 0,76 22,5 0,89 25,6 1,01 WO10B-04-04 6 1/4" WO10B-10-10 WO10B-12-12 WO10B-16-16 1/2” 16 5/8” 19 3/4” 25 1” 08 10 12 16 17 © Intertraco (Italia) S.p.A. All rights are reserved - 129 130 - © Intertraco (Italia) S.p.A. All rights are reserved Series Serie i INTERLOCK FITTINGS FOR 4 AND 6 SPIRAL HOSES RACCORDI INTERLOCK PER TUBI A 4 E 6 SPIRALI INTERLOCK-ARMATUREN FÜR 4 UND 6 SPIRALSCHLÄUCHE RACORES INTERLOCK PARA MANGUERA 4 Y 6 ESPIRALES 132 - © Intertraco (Italia) S.p.A. All rights are reserved i INTERLOCK FITTINGS FOR 4 AND 6 SPIRAL HOSES RACCORDI INTERLOCK PER TUBI A 4 E 6 SPIRALI INTERLOCK-ARMATUREN FÜR 4 UND 6 SPIRALSCHLÄUCHE RACORES INTERLOCK PARA MANGUERA 4 Y 6 ESPIRALES INdex-INDICE-INDEX-ÍNDICE PRODUCT PRODOTTO PRODUKT PRODUCTO DESCRIPTION DESCRIZIONE BESCHREIBUNG DESCRIPCIÓN PAGE PAGINA SEITE PÁGINA INTERLOCK FERRULE FOR 4 SPIRAL HOSES ferrule S004I BOCCOLA INTERLOCK FASSUNG FÜR 4 SPIRALSCHLÄUCHE 138 CASQUILLO INTERLOCK PARA MANGUERA 4 ESPIRALES INTERLOCK FERRULE FOR 6 SPIRAL HOSES PRESSFASSUNG CASQUILLO BOCCOLA INTERLOCK PER TUBI 4 SPIRALI S006I BOCCOLA INTERLOCK PER TUBI 6 SPIRALI INTERLOCK FASSUNG FUR 6 SPIRALSCHLÄUCHE 139 CASQUILLO INTERLOCK PARA MANGUERA 6 ESPIRALES BSPT TAPERED MALE - 60° CONE MT10I MASCHIO BSP CONICO SV. 60° BSPT AussengEwinde - 60° konus 140 MACHO FIJO BSPT cono 60° BSP MALE - 60° cone MB10I MASCHIO BSP CILINDRICO SV. 60° AGR BSP-Anschlussstutzen 60° Konus mit BSP AG 141 MACHO FIJO BSP cono 60° BSP O-RING FEMALE SWIVEL 60° cone BSP-BSPT FO12I FEMMINA BSP DIRITTA O-RING CONO 60° DKR BSP Dichtkegel mit O-Ring - 60° konus 142 HEMBRA GIRATORIA RECTA BSP cono 60° CON JUNTA TORICA BSP O-RING FEMALE SWIVEL 60° cone - 45° ELBOW FO42I FEMMINA BSP 45° CONO 60° SEDE O-RING DKR 45° BSP Dichtkegel mit O-Ring - 60° konus 143 HEMBRA GIRATORIA A 45° BSP cono 60° CON JUNTA TORICA BSP O-RING FEMALE SWIVEL 60° cone - 90° ELBOW FO92I FEMMINA BSP 90° O-RING CONO 60° DKR 90° BSP Dichtkegel mit O-Ring - 60° konus 144 HEMBRA GIRATORIA A 90° BSP cono 60° CON JUNTA TORICA © Intertraco (Italia) S.p.A. All rights are reserved - 133 i INTERLOCK FITTINGS FOR 4 AND 6 SPIRAL HOSES RACCORDI INTERLOCK PER TUBI A 4 E 6 SPIRALI INTERLOCK-ARMATUREN FÜR 4 UND 6 SPIRALSCHLÄUCHE RACORES INTERLOCK PARA MANGUERA 4 Y 6 ESPIRALES PRODUCT PRODOTTO PRODUKT PRODUCTO DESCRIPTION DESCRIZIONE BESCHREIBUNG DESCRIPCIÓN PAGE PAGINA SEITE PÁGINA METRIC HEAVY MALE (24° CONE SEAT) MS10I MASCHIO METRICO SV. 24° SERIE PESANTE CES Gewindezapfen schwere Reihe 24° Konus 145 MACHO FIJO METRICO CONO 24° SERIE PESADA METRIC HEAVY FEMALE SWIVEL (24° CONE SEAT) FS13I FEMMINA METRICA DIRITTA O-RING CONO 24° SERIE PESANTE DKOS Dichtkegel mit O-Ring schwere Reihe - 24° KONUS 146 HEMBRA GIRATORIA RECTA METRICA CONO 24° SERIE PESADA METRIC METRIC HEAVY FEMALE SWIVEL - 45° ELBOW (24° CONE SEAT) FS43I FEMMINA METRICA 45° O-RING CONO 24° SERIE PESANTE Dkos 45° - 24° konus 147 hembra giratoria A 45° metrica cono 24° serie pesada METRIC HEAVY FEMALE SWIVEL - 90° ELBOW (24° CONE SEAT) FS93I FEMMINA METRICA 90° O-RING CONO 24° SERIE PESANTE DKOS 90° - 24° konus 148 HEMBRA GIRATORIA A 90° METRICA CONO 24° SERIE PESADA JIC 37° MALE MJ10I MASCHIO JIC CONO 37° AGJ JIC -Anschlussstutzen 37° Konus mit UNF Gewinde 149 MACHO FIJO JIC 37° JIC 37° FEMALE SWIVEL FJ12I FEMMINA JIC DRITTA SV. 37° DKJ JIC - Dichtkopf 37° Konus UNF Gewinde 150 HEMBRA GIRATORIA RECTA JIC 37° JIC JIC 37° FEMALE SWIVEL - 45° ELBOW FJ42I FEMMINA JIC 45° SV. 37° Dkj 45° - 37° konus 151 HEMBRA GIRATORIA A 45° JIC 37° JIC 37° FEMALE SWIVEL - 90° ELBOW FJ92I FEMMINA JIC 90° SV. 37° DKJ 90° - 37° konus HEMBRA GIRATORIA A 90° JIC 37° 134 - © Intertraco (Italia) S.p.A. All rights are reserved 152 i INTERLOCK FITTINGS FOR 4 AND 6 SPIRAL HOSES RACCORDI INTERLOCK PER TUBI A 4 E 6 SPIRALI INTERLOCK-ARMATUREN FÜR 4 UND 6 SPIRALSCHLÄUCHE RACORES INTERLOCK PARA MANGUERA 4 Y 6 ESPIRALES PRODUCT PRODOTTO PRODUKT PRODUCTO DESCRIPTION DESCRIZIONE BESCHREIBUNG DESCRIPCIÓN PAGE PAGINA SEITE PÁGINA ORFS FEMALE SWIVEL OR13I FEMMINA ORFS DIRITTA ORFS - Armatur Innengewinde 153 HEMBRA GIRATORIA RECTA ORFS ORFS FEMALE SWIVEL - 45° ELBOW ORFS OR43I FEMMINA ORFS 45° 154 ORFS - Armatur 45° HEMBRA GIRATORIA A 45° ORFS ORFS FEMALE SWIVEL - 90° ELBOW OR93I FEMMINA ORFS 90° 155 ORFS - Armatur 90° HEMBRA GIRATORIA A 90° ORFS NPTF MALE (60° CONE SEAT) MASCHIO NPTF SV. 60° NPTF MN10I AGN Anschlussstutzen mit konischem NPTF-Gewinde selbstdichtend 60° konus 156 MACHO FIJO NPTF CONO 60° SAE 3000 CODE 61 STRAIGHT FLANGE AX10I FLANGIA DIRITTA SAE 3000 SFL gerade 157 BRIDA RECTA SAE 3000 PSI SAE 3000 CODE 61 - 30° ELBOW FLANGE SAE 3000 CODE 61 AX30I FLANGIA 30° SAE 3000 SFL 30° Bogenarmatur 158 BRIDA A 30° SAE 3000 PSI SAE 3000 CODE 61 - 45° ELBOW FLANGE AX40I FLANGIA 45° SAE 3000 SFL 45° Bogenarmatur 159 BRIDA A 45° SAE 3000 PSI © Intertraco (Italia) S.p.A. All rights are reserved - 135 i INTERLOCK FITTINGS FOR 4 AND 6 SPIRAL HOSES RACCORDI INTERLOCK PER TUBI A 4 E 6 SPIRALI INTERLOCK-ARMATUREN FÜR 4 UND 6 SPIRALSCHLÄUCHE RACORES INTERLOCK PARA MANGUERA 4 Y 6 ESPIRALES PRODUCT PRODOTTO PRODUKT PRODUCTO DESCRIPTION DESCRIZIONE BESCHREIBUNG DESCRIPCIÓN PAGE PAGINA SEITE PÁGINA SAE 3000 CODE 61 - 60° ELBOW FLANGE AX60I FLANGIA 60° SAE 3000 SFL 60° Bogenarmatur 160 BRIDA A 60° SAE 3000 PSI SAE 3000 CODE 61 SAE 3000 CODE 61 - 90° ELBOW FLANGE AX90I FLANGIA 90° SAE 3000 SFL 90° Bogenarmatur 161 BRIDA A 90° SAE 3000 PSI SAE 6000 CODE 62 STRAIGHT FLANGE AY10I FLANGIA DIRITTA SAE 6000 SFS gerade 162 BRIDA RECTA SAE 6000 PSI SAE 6000 CODE 62 STRAIGHT FLANGE (LONG REACH VERSION) AY10I-L FLANGIA DIRITTA SAE 6000 psi (VERSIONE LUNGA) SFS gerade (Lange Version) 163 BRIDA RECTA SAE 6000 PSI (CODO LARGO) SAE 6000 CODE 62 - 30° ELBOW FLANGE AY30I FLANGIA 30° SAE 6000 SFS 30° Bogenarmatur 164 BRIDA A 30° SAE 6000 PSI SAE 6000 CODE 62 SAE 6000 CODE 62 - 45° ELBOW FLANGE AY40I FLANGIA 45° SAE 6000 SFS 45° Bogenarmatur 165 BRIDA A 45° SAE 6000 PSI SAE 6000 CODE 62 - 45° ELBOW FLANGE (LONG DROP) AY40I-L FLANGIA 45° SAE 6000 (versione alta) SFS 45° Bogenarmatur Sonder-SL 166 BRIDA A 45° SAE 6000 PSI ( CODO LARGO ) SAE 6000 CODE 62 - 60° ELBOW FLANGE AY60I FLANGIA 60° SAE 6000 SFS 60° Bogenarmatur BRIDA A 60° SAE 6000 PSI 136 - © Intertraco (Italia) S.p.A. All rights are reserved 167 i INTERLOCK FITTINGS FOR 4 AND 6 SPIRAL HOSES RACCORDI INTERLOCK PER TUBI A 4 E 6 SPIRALI INTERLOCK-ARMATUREN FÜR 4 UND 6 SPIRALSCHLÄUCHE RACORES INTERLOCK PARA MANGUERA 4 Y 6 ESPIRALES PRODUCT PRODOTTO PRODUKT PRODUCTO DESCRIPTION DESCRIZIONE BESCHREIBUNG DESCRIPCIÓN PAGE PAGINA SEITE PÁGINA SAE 6000 CODE 62 - 90° ELBOW FLANGE AY90I FLANGIA 90° SAE 6000 SFS 90° Bogenarmatur 168 BRIDA A 90° SAE 6000 PSI SAE 6000 CODE 62 SAE 6000 CODE 62 - 90° ELBOW FLANGE (LONG DROP) AY90I-L FLANGIA 90° SAE 6000 (versione alta) SFS 90° Bogenarmatur Sonder-SL 169 BRIDA A 90° SAE 6000 PSI ( CODO LARGO ) SUPERCAT STYLE STRAIGHT FLANGE AY1CI FLANGIA DIRITTA stile SUPERCAT SAE Flansch SuperCat- Typ 6000 PSI 170 BRIDA RECTA ESTILO SUPERCAT SUPERCAT STYLE - 22,5° ELBOW FLANGE AY2CI FLANGIA 22,5° stile SUPERCAT SAE Flansch SuperCat-Typ 22,5° 6000 PSI 171 BRIDA A 22,5° ESTILO SUPERCAT SUPERCAT STYLE - 30° ELBOW FLANGE SUPERCAT STYLE HIGH PRESSURE FLANGE AY3CI FLANGIA 30° stile SUPERCAT SAE Flansch SuperCat-Typ 30° 6000 PSI 172 BRIDA A 30° ESTILO SUPERCAT SUPERCAT STYLE - 45° ELBOW FLANGE AY4CI FLANGIA 45° stile SUPERCAT SAE Flansch SuperCat-Typ 45° 6000 PSI 173 BRIDA A 45° ESTILO SUPERCAT SUPERCAT STYLE - 60° ELBOW FLANGE AY6CI FLANGIA 60° stile SUPERCAT SAE Flansch SuperCat-Typ 60° 6000 PSI 174 BRIDA A 60° ESTILO SUPERCAT SUPERCAT STYLE - 90° ELBOW FLANGE AY9CI FLANGIA stile 90° SUPERCAT SAE Flansch SuperCat-Typ 90° 6000 PSI 175 BRIDA A 90° ESTILO SUPERCAT © Intertraco (Italia) S.p.A. All rights are reserved - 137 i INTERLOCK FITTINGS FOR 4 AND 6 SPIRAL HOSES RACCORDI INTERLOCK PER TUBI A 4 E 6 SPIRALI INTERLOCK-ARMATUREN FÜR 4 UND 6 SPIRALSCHLÄUCHE RACORES INTERLOCK PARA MANGUERA 4 Y 6 ESPIRALES FERRULE S004I Interlock L C BOCCOLA Interlock Interlock Fassung CASQUILLO INTERLOCK Ø HOSE S004I CODE FERRULE FOR EN856 4SP SKIVE (SIZES 06 TO 16); 4SH - SAE 100 Ø TUBO C CODICE Ø SCHLAUCH R13/R15 BEST.-NR (SIZES 12 TO 16) - INTERTRACO Ø MANGUERA HOSE TYPE FlexIT 4SP (SIZES CODIGO 06 TO 16); FlexIT 4SH; FlexIT 13 (SIZES 12 TO DN INCH SIZE16); FlexIT [mm] 15 (SIZES [in] 12 [mm] S004I-06 CODICE S004I-06 HOSE BORE S004I-08 DN INCH SIZE [mm] S004I-10 10 C [in] 12 [in] 3/8” 06 27 1,06 49 1,93 1/2” 08 30 1,18 52,5 2,07 5/8” 10 34 1,34 57,5 2,26 3/4” 12 38 1,50 60 2,36 1” 16 46 1,81 74,5 2,93 1.1/4” 20 55 2,17 88 3,46 L [mm] [in] 49 1,93 52,5 2,07 57,5 2,26 60 2,36 16 L 10 3/8" 06 27 1,06 12 1/2" 08 30 1,18 16 5/8" 10 34 1,34 19 3/4" 12 38 1,50 S004I-16 S004I-24 25 1" 16 46 1,81 3874,5 2,931.1/2” 24 62 2,44 94 3,70 S004I-20 S004I-32 31 1.1/4" 20 55 2,17 5188 3,46 2” 32 78 3,07 99 3,90 S004I-08 S004I-10 S004I-12 S004I-12 S004I-16 S004I-20 19 25 31 S004I-24 38 1.1/2" 24 62 2,44 94 3,70 S004I-32 51 2" 32 78 3,07 99 3,90 INTERLOCK FERRULE FOR: EN856 4SP (SIZES 06 TO 16); EN856 4SH (SIZES 12 TO 32) - SAE 100 R13 (SIZES 12 TO 16); SAE 100 R15 (SIZES 12 TO 16) INTERTRACO HOSE TYPES: FlexIT 4SP; FlexIT 4SH; FlexIT 13; FlexIT 15 BOCCOLA INTERLOCK PER TUBI: EN856 4SP (DA SIZE 06 A SIZE 16); EN 856 4SH (DA SIZE 12 A SIZE 32) - SAE 100 R13 (DA SIZE 12 A SIZE 16); SAE 100 R15 (DA SIZE 12 A SIZE 16) TUBI INTERTRACO: FlexIT 4SP; FlexIT 4SH; FlexIT 13; FlexIT 15 INTERLOCK FASSUNG FÜR SCHLÄUCHE: EN856 4SP (FON GRÖSSE 06 BIS 16); EN856 4SH (FON GRÖSSE 12 BIS 32) - SAE 100 R13 (VON GRÖSSE 12 BIS 16); SAE 100 R15 (VON GRÖSSE 12 BIS 16) INTERTRACO-SCHLÄUCHE TYP: FlexIT 4SP; FlexIT 4SH; FlexIT 13; FlexIT 15 CASQUILLO INTERLOCK PARA: EN856 4SP (PULGADA DE 06 A 16); EN856 4SH (PULGADA DE 06 A 16) - SAE 100 R13 (PULGADA DE 12 A 16); SAE 100 R15 (PULGADA DE 12 A 16) MANGUERA INTERTRACO TIPO: FlexIT 4SP; FlexIT 4SH; FlexIT 13; FlexIT 15 138 - © Intertraco (Italia) S.p.A. All rights are reserved i INTERLOCK FITTINGS FOR 4 AND 6 SPIRAL HOSES RACCORDI INTERLOCK PER TUBI A 4 E 6 SPIRALI INTERLOCK-ARMATUREN FÜR 4 UND 6 SPIRALSCHLÄUCHE RACORES INTERLOCK PARA MANGUERA 4 Y 6 ESPIRALES FERRULE S006I Interlock L C BOCCOLA Interlock Interlock Fassung CASQUILLO INTERLOCK PARA S006I SKIVE FERRULE FOR SAE 100 R13 (SIZES 20 TO 32); R15 (SIZES 20 TO HOSE FlexIT BORE 13 (SIZES 20 TO 32); FlexIT 15 24) - INTERTRACO HOSE TYPE CODE ITALIANO C (SIZES 20 TO 24) CODICE TEDESCO BEST.-NR CODIGO CODICE S006I-20 S006I-24 S006I-32 SPAGNOLO C DN HOSE BORE DN INCH SIZE S006I-20 L INCH [mm] [in] [mm] 31 31 1.1/4" 20 60 2,36 88 38 1.1/2" 24 67 2,64 94 2" 32 84,5 51 3,33 99 S006I-24 S006I-32 51 L 38 SIZE [mm] [in] [mm] [in] 20 60 2,36 88 3,46 1.1/2” 24 67 2,64 94 3,70 2” 3,90 32 84,5 3,33 99 3,90 [in] 1.1/4” 3,46 3,70 INTERLOCK FERRULE FOR: SAE 100 R13 (SIZES 20 TO 32); SAE 100 R15 (SIZES 20 TO 24) INTERTRACO HOSE TYPE: FlexIT 13; FlexIT 15 BOCCOLA INTERLOCK PER TUBI: SAE 100 R13 (DA SIZE 20 A SIZE 32); SAE 100 R15 (DA SIZE 20 A SIZE 24) TUBI INTERTRACO: FlexIT 13; FlexIT 15 INTERLOCK FASSUNG FÜR SCHLÄUCHE: SAE 100 R13 (VON GRÖSSE 20 BIS 32); SAE 100 R15 (VON GRÖSSE 20 BIS 24) INTERTRACO-SCHLÄUCHE TYP: FlexIT 13; FlexIT 15 CASQUILLO INTERLOCK PARA: SAE 100 R13 (PULGADA DE 20 A 32); SAE 100 R15 (PULGADA DE 20 A 24) MANGUERA INTERTRACO TIPO: FlexIT 13; FlexIT 15 I Series Catalogue_Rev01.2007.xls Pagina 5 di 40 © Intertraco (Italia) S.p.A. All rights are reserved - 139 The document is exclusive property of INTERTRACO S.p.A.. All rights are reserved. i INTERLOCK FITTINGS FOR 4 AND 6 SPIRAL HOSES RACCORDI INTERLOCK PER TUBI A 4 E 6 SPIRALI INTERLOCK-ARMATUREN FÜR 4 UND 6 SPIRALSCHLÄUCHE RACORES INTERLOCK PARA MANGUERA 4 Y 6 ESPIRALES MT10I BSPT BSPT TAPERED MALE - 60° cone B ES MASCHIO BSP CONICO SV. 60° T BSPT Aussengwinde - 60° konus MACHO FIJO BSPT cono 60° A BSPT TAPERED MALE MT10I CODE CODICE CODICE BEST.-NR CODIGO MT10I-12-12 Ø HOSE Ø TUBO HOSE BORE Ø SCHLAUCH DN INCH SIZE Ø MANGUERA 19 MT10I-16-16 25 MT10I-20-20 31 MT10I-12-12 DN 19 3/4" 12 INCH 1" 16 1.1/4" 3/4” T T [mm] A 3/4" - 14 30,5 1,20 1" - 11 36,5 1,44 43,5 1,71 1” 44 - 11 1,73 SIZE 12 ES B [mm] [in] [mm] [in] 20 0,79 30 1,18 23 0,91 36 1,42 [mm] [in] ES inin 1.3/16" [mm] [in] [mm] [in] 20 0,79 27 1,063 1.1/16” 1.7/16" [in] 40 1,57 0,98 46 4428 1,73 1,10 50 23 1,97 0,912" 36 1,417 1.7/16” 20 2" - 11 1.1/4” 53- 11 2,09 47,2 28 1,86 1,10 60 25 2,36 0,98 2.3/8" 46 1,811 1.13/16” 20 1.1/4" - 11 MT10I-16-16 MT10I-24-24 38 251.1/2" 1”24 16 - 11 1.1/2" MT10I-20-20 MT10I-32-32 51 31 2" 1.1/4” 32 3/4” - 14 AB [in] 25 1,81 1.13/16" MT10I-24-24 38 1.1/2” 24 1.1/2” - 11 50,5 1,99 28 1,10 50 1,969 2” MT10I-32-32 51 2” 32 2” - 11 57 2,24 28 1,10 60 2,362 2.3/8” 140 - © Intertraco (Italia) S.p.A. All rights are reserved i INTERLOCK FITTINGS FOR 4 AND 6 SPIRAL HOSES RACCORDI INTERLOCK PER TUBI A 4 E 6 SPIRALI INTERLOCK-ARMATUREN FÜR 4 UND 6 SPIRALSCHLÄUCHE RACORES INTERLOCK PARA MANGUERA 4 Y 6 ESPIRALES MB10I BSP BSP MALE 60° cone B ES MASCHIO BSP CILINDRICO SV. 60° T AGR BSP-Anschlussstutzen 60° Konus mit BSP AG MACHO FIJO BSP cono 60° A MB10I CODE CODICE CODICE BEST.-NR CODIGO MB10I-12-12 BSP MALE Ø HOSE Ø TUBO HOSE BORE Ø SCHLAUCH DN INCH SIZE Ø MANGUERA 19 12 DN 3/4" INCH T 3/4" - 14 SIZE T A AB [mm] [in] 35 1,38 16 [mm] 0,63 [in] 32 [mm]1,26 40 1,57 19 0,75 41 1,61 44,5 1,75 20 0,79 50 1,97 47,2 1,86 19 0,75 41 1,61 0,79 50 MB10I-16-16 25 MB10I-16-20 25 MB10I-20-16 31 MB10I-20-20 31 MB10I-20-16 MB10I-24-16 38 311.1/2"1.1/4” 24 20 1" - 11 1”47,5 - 11 1,87 47,2 19 MB10I-24-24 MB10I-20-20 38 311.1/2"1.1/4” 24 1.1/2" 48,5- 11 1,91 45,2 22 20 - 11 1.1/4” MB10I-32-32 MB10I-24-16 51 38 2" 1.1/2” 32 2" - 11 24 MB10I-12-12 MB10I-16-16 MB10I-16-20 19 25 1" 16 3/4” 1" 1.1/4" 1" - 11 12 3/4” - 14 16 1” - 11 16 1.1/4" - 11 20 1" - 11 1” 251.1/4" 1”20 16 1.1/4" - 11 ES B [mm] 35 40 1.1/4” - 11 1,78 44,5 45,2 20 1”58,5 - 11 [in] 1,38 1,57 1,75 [mm] 16 19 ES [in] inin [in]1.1/4" [mm] 1.5/8" 0,63 0,75 2" 1.5/8" [in] [in] 32 1,260 1.1/4” 41 1,614 1.5/8” 50 1,969 2” 1,86 0,75 20 1,97 0,792" 5019 1,97 0,752" 41 1,614 1.5/8” 0,87 1,78 5520 2,17 0,79 2.3/16" 50 1,969 2” 2,30 47,5 25 0,98 1,87 7019 2,76 0,75 2.3/4" 50 1,969 2” MB10I-24-24 38 1.1/2” 24 1.1/2” - 11 48,5 1,91 22 0,87 55 2,165 2.3/16” MB10I-32-32 51 2” 32 2” - 11 58,5 2,30 25 0,98 70 2,756 2.3/4” © Intertraco (Italia) S.p.A. All rights are reserved - 141 i INTERLOCK FITTINGS FOR 4 AND 6 SPIRAL HOSES RACCORDI INTERLOCK PER TUBI A 4 E 6 SPIRALI INTERLOCK-ARMATUREN FÜR 4 UND 6 SPIRALSCHLÄUCHE RACORES INTERLOCK PARA MANGUERA 4 Y 6 ESPIRALES FO12I BSP BSP O-RING FEMALE SWIVEL 60° cone CH FEMMINA BSP DIRITTA O-RING CONO 60° T DKR BSP Dichtkegel mit O-Ring 60° konus HEMBRA GIRATORIA RECTA BSP cono 60° CON JUNTA TORICA 60° A FO12I BSPØ O-RING FEMALE SWIVEL HOSE CODE CODICE BEST.-NR CODICE CODIGO DN FO12I-06-06 10 FO12I-12-12 19 FO12I-06-06 FO12I-12-12 FO12I-16-16 B Ø TUBO Ø SCHLAUCH HOSEØ BORE MANGUERA INCH DN 10 3/8" 3/4" A B T A INCH T SIZE [mm] [in] 3/8” 06 20 3/8” - 14 0,79 23,3 0,92 SIZE 06 12 3/8" - 14 3/4" - 14 [in] [mm] [in] 6 0,24 22 0,87 9 0,35 32 0,41 38 [mm] 20 FO12I-16-16 FO12I-20-20 19 1" 3/4” 16 25 1” 31 1.1/4" 20 3/4” - 14 1,04 23,3 26,5 10,5 16 1” 11 26,5 1.1/4" - 11 33,7 1,33 10 FO12I-24-24 FO12I-20-20 38 311.1/2"1.1/4” 24 1.1/2" 32,5- 111,28 33,7 12 20 - 11 1.1/4” FO12I-32-32 FO12I-24-24 51 38 2" 1.1/2” 32 FO12I-32-32 25 51 2” 12 1" - 11 [mm] 2" - 11 24 32 34 - 111,34 32,5 16 1.1/2” 2” - 11 142 - © Intertraco (Italia) S.p.A. All rights are reserved B CH 34,9 [in] [in] 22 0,866 7/8” 32 1,260 1.1/4” 1,04 0,39 9 1,50 0,35 1.1/2" 10,5 0,41 50 1,97 2" 38 1,496 1.1/2” 0,47 1,33 5510 2,17 0,39 2.3/16" 50 1,969 2” 0,63 1,28 7012 2,76 0,47 2.3/4" 55 2,165 2.3/16” 70 2,756 2.3/4” 0,92 1,37 6 16 1,26 [in] inin [mm] 0,79 [mm] CH 7/8" 0,24 1.1/4" 0,63 [in] i INTERLOCK FITTINGS FOR 4 AND 6 SPIRAL HOSES RACCORDI INTERLOCK PER TUBI A 4 E 6 SPIRALI INTERLOCK-ARMATUREN FÜR 4 UND 6 SPIRALSCHLÄUCHE RACORES INTERLOCK PARA MANGUERA 4 Y 6 ESPIRALES FO42I BSP BSP O-RING FEMALE SWIVEL 60° cone - 45° ELBOW A CH D FEMMINA BSP 45° CONO 60° SEDE O-RING T B DKR 45° BSP Dichtkegel mit O-Ring 60° konus HEMBRA GIRATORIA A 45° BSP cono 60° CON JUNTA TORICA 60° CODE CODICE BEST.-NR FO42I CODIGO FO42I-12-12 CODICE FO42I-16-16 FO42I-20-20 FO42I-12-12 FO42I-24-24 FO42I-16-16 FO42I-32-32 FO42I-20-20 Ø HOSE Ø TUBO Ø SCHLAUCH Ø MANGUERA BSP DN 19 25 INCH DN 16 INCH 31 B D CH O-RING FEMALE SWIVEL - 45° ELBOW SIZE [mm] [in] [mm] [in] [mm] [in] [mm] 67,6 2,66 9 0,35 1,11 3,19 [mm] 10,5 [in] 0,41 [mm] B 28,3 D32 1.1/4” - 11 95,1 3,74 12 3/4" - 14 68 1.1/2” - 11 116,5 4,59 16 1" - 11 83 2” - 11 136,6 5,38 20 1.1/4" - 11 102 10 2,68 12 3,27 16 4,02 3/4” 12 HOSE BORE 1” A T 1.1/4” 20 19 3/4" 38 1.1/2” 24 25 1" 51 2” 32 31 1.1/4" 3/4” - 14 SIZE 1” - 11 T 81 A 32,3 [in] 1,27 [mm] 0,39 9 0,47 10,5 0,63 10 36,3 0,35 49,2 0,41 59,6 0,39 1,43 32 1,94 36 2,35 45 [in] 1,260 [in] 1.1/4” CH 38[in] 1,496 [mm] 1.1/2” [in] 50 1,969 1,26 32 55 2,165 1,42 38 70 2,756 1,77 50 2” 1,2598 2.3/16” 1,4961 2.3/4” 1,9685 inin 1.1/4" 1.1/2" 2" FO42I-24-24 38 1.1/2" 24 1.1/2" - 11 128,9 5,07 12 0,47 51,5 2,03 55 2,1654 2.3/16" FO42I-32-32 51 2" 32 2" - 11 149 5,87 16 0,63 65 2,56 70 2,7559 © Intertraco (Italia) S.p.A. All rights are reserved - 143 2.3/4" i INTERLOCK FITTINGS FOR 4 AND 6 SPIRAL HOSES RACCORDI INTERLOCK PER TUBI A 4 E 6 SPIRALI INTERLOCK-ARMATUREN FÜR 4 UND 6 SPIRALSCHLÄUCHE RACORES INTERLOCK PARA MANGUERA 4 Y 6 ESPIRALES FO92I BSP BSP O-RING FEMALE SWIVEL 60° CONE - 90° ELBOW A FEMMINA BSP 90° O-RING CONO 60° B D DKR 90° BSP Dichtkegel mit O-Ring 60° konus HEMBRA GIRATORIA A 90° BSP cono 60° CON JUNTA TORICA 60° T CODE CODICE FO92I BEST.-NR CODIGO CODICE FO92I-12-12 FO92I-16-16 FO92I-12-12 FO92I-20-20 FO92I-16-16 FO92I-20-24 FO92I-20-20 CH Ø HOSE Ø TUBO A Ø SCHLAUCH T BSP O-RING FEMALE SWIVEL Ø MANGUERA DN INCH 19 DN 25 3/4” INCH 1” SIZE HOSE BORE 19 31 3/4" 12 3/4” T - 14 1” - 11 3/4" - 14 58 A [mm] [in] 2,28 [in] D [mm] 9 [mm] B [mm] 0,35 58,8 71 2,80 [in] [mm] 1,260 1.1/4” 38 1,496 1.1/2” 0,39 77 3,03 50 2,09 9 0,35 63 inin 1.1/4" 38 1,4961 1.1/2" 3,50 3,90 55 50 2,165 1,9685 2.3/16” 2" 100 89 3,94 3,50 55 55 2,165 2.3/16" 2.3/16” 2,1654 0,63 0,47 128 108 5,04 4,25 70 55 2,756 2.3/16" 2.3/4” 2,1654 0,63 131 5,16 70 2,7559 1.1/2” 1.1/4"-- 11 11 79,7 88 3,14 3,46 12 10 0,47 0,39 89 99 FO92I-24-24 FO92I-20-24 3831 1.1/2” 1.1/4" 2420 1.1/2” 1.1/2"-- 11 11 99,5 79,7 3,92 3,14 12 12 0,47 0,47 FO92I-32-32 FO92I-24-24 5138 32 24 2” - 11 1.1/2" - 11 127 111,5 5,00 4,39 16 12 FO92I-32-32 51 2" - 11 135 5,31 16 144 - © Intertraco (Italia) S.p.A. All rights are reserved [in] [in] 1,2598 2020 68 0,41 77 2,48 CH 32 3131 1.1/4” 1.1/4" 32 32 [mm] 10 53 10,5 2" [in] [in] 0,41 2,68 2” 1.1/2" 2,31 [mm] 10,5 3,15 1" - 11 [in] 2,72 80,1 16 D 69 1.1/4” - 11 1" CH [in] 20 25 1.1/4” 12 SIZE 16 [mm] B - 90° ELBOW 3,03 1,969 2” 2.3/4" i INTERLOCK FITTINGS FOR 4 AND 6 SPIRAL HOSES RACCORDI INTERLOCK PER TUBI A 4 E 6 SPIRALI INTERLOCK-ARMATUREN FÜR 4 UND 6 SPIRALSCHLÄUCHE RACORES INTERLOCK PARA MANGUERA 4 Y 6 ESPIRALES MS10I METRIC METRIC HEAVY MALE (24° CONE SEAT) B ES MASCHIO METRICO SV. 24° SERIE PESANTE T CES Gewindezapfen schwere Reihe 24° Konus MACHO FIJO METRICO CONO 24° SERIE PESADA A MS10I CODE CODICE CODICE BEST.-NR CODIGO METRIC HEAVY MALE (24° CONE SEAT) Ø HOSE Ø TUBO HOSE BORE Ø SCHLAUCH MANGUERA DN ØINCH SIZE T T PIPE PIPE B ES B [mm] [in] [mm] [in] ES [mm] [in] inin 32 [mm] 1,26 16[in] 0,63 [mm] 30 [in] 1,18 [mm] 1.3/16" MS10I-10-30 16DN 5/8"INCH 10 MS10I-12-36 MS10I-10-30 1916 3/4"5/8” 12 10 M36X2 35 M30X2 S25 S20 1,38 32 181,26 0,71 1636 1,42 0,63 1.7/16" 30 1,181 1.3/16” MS10I-16-36 MS10I-12-36 2519 1" 3/4” 16 12 M36X2 34 M36X2 S25 S25 1,34 35 181,38 0,71 1836 1,42 0,71 1.7/16" 36 1,417 1.7/16” MS10I-16-42 25 1" 38 1,50 20 0,79 1,81 1.13/16" MS10I-20-52 31 1.1/4" 20 43 1,69 22 0,87 2,17 2.3/16" 36 1,417 1.7/16” MS10I-24-52 38 1.1/2" 24 44,5 1,75 22 0,87 2,17 2.3/16" 46 1,811 1.13/16” 55 2,165 2.3/16” 55 2,165 2.3/16” MS10I-16-36 MS10I-16-42 MS10I-20-52 MS10I-24-52 25 25 31 38 1” 1” 16 SIZE M30X2 A A 16 16 1.1/4” 20 1.1/2” 24 S20 M42X2 S30 M52X2 S38 M52X2 S38 M36X2 M42X2 M52X2 M52X2 S25 S30 S38 S38 34 38 47,2 47,5 1,34 1,50 1,86 1,87 46 18 0,71 20 0,79 22 0,87 22 0,87 55 55 [in] [in] © Intertraco (Italia) S.p.A. All rights are reserved - 145 i INTERLOCK FITTINGS FOR 4 AND 6 SPIRAL HOSES RACCORDI INTERLOCK PER TUBI A 4 E 6 SPIRALI INTERLOCK-ARMATUREN FÜR 4 UND 6 SPIRALSCHLÄUCHE RACORES INTERLOCK PARA MANGUERA 4 Y 6 ESPIRALES FS13I METRIC METRIC HEAVY FEMALE SWIVEL (24° CONE SEAT) CH T FEMMINA METRICA DIRITTA O-RING CONO 24° SERIE PESANTE A FS13I CODE CODICE CODICE BEST.-NR CODIGO DKOS Dichtkegel mit O-Ring schwere Reihe 24° konus B HEMBRA GIRATORIA RECTA METRICA CONO 24° SERIE PESADA METRIC HEAVY FEMALE SWIVEL (24° CONE SEAT) Ø HOSE Ø TUBO HOSE BORE Ø SCHLAUCH DN ØINCH SIZE MANGUERA T T PIPE PIPE A B A [mm] [in] 30 1,18 [mm] 3 [in] 0,12 30 [mm] S16 31 3 1,22 0,12 330 34 1,34 3,5 0,14 37 1,46 3 0,12 38 1,50 3 12 M42X2 M36X2S30 S25 40,5 39,5 1,59 6 1,56 0,24 350 3125 1.1/4"1” 20 16 M42X2 M36X2S30 S25 33,2 39 1,31 6 1,54 0,24 350 FS13I-20-52 FS13I-16-42 3125 1.1/4"1” 20 45 16 M52X2 M42X2S38 S30 660 FS13I-24-52 FS12I-20-42 38 FS13I-32-68 51 FS13I-06-24 10DN 3/8"INCH 06 FS13I-08-24 FS13I-06-24 1210 1/2"3/8” 08 FS13I-10-30 16 FS13I-12-36 19 FS13I-16-36 25 FS13I-12-36 FS13I-16-42 2519 1" 3/4” 16 FS13I-16-36 FS12I-20-42 FS13I-10-30 FS13I-12-30 FS13I-20-52 FS13I-24-52 FS13I-32-68 16 19 31 31 5/8" 10 3/4" 12 1" 16 5/8” 3/4” 1.1/2" 24 2" 32 1.1/4” SIZEM24X1,5 06 M24X1,5 M24X1,5S16 10 12 20 1.1/4” 20 38 1.1/2” 51 2” FS12 S16 M30X2 S20 M36X2 S25 M36X2 S25 M30X2 S20 M30X2 S20 M52X2 S38 M42X2 M68X2 34 27 [mm] B CH 1,34 1,06 [in] 0,12 1,77 41,5 6,51,63 0,26 45,5 S30 1,79 33,2 6,5 0,26 66 2,60 6 0,24 1,78 inin 1.3/16" [mm] 1,18 0,12 1.3/16" 30 [in] 1.3/16” 36 1,417 1.7/16” 36 1,417 1.7/16” 0,12 1,97 2"46 1,811 1.13/16” 0,12 1,97 2"46 1,811 1.13/16” 1,42 1.7/16" 46 1,81 1.13/16" 46 1,81 1.13/16" 3,5 [in] 1,181 36 3,5 6 [in] 1,18 [in] 0,14 0,14 2,36 0,24 2.3/8" 50 1,969 2” 60 2,36 0,24 2.3/8" 1,969 2” 80 3,15 3.3/16" 60 2,362 2.3/8” 6,5 0,26 50 M52X2 S38 24 M52X2 S38 45,5 1,79 6,5 0,26 60 2,362 2.3/8” 32 M68X2 S54 67 2,64 6 0,24 80 3,150 3.3/16” 146 - © Intertraco (Italia) S.p.A. All rights are reserved 45,2 1,31 [mm] CH i INTERLOCK FITTINGS FOR 4 AND 6 SPIRAL HOSES RACCORDI INTERLOCK PER TUBI A 4 E 6 SPIRALI INTERLOCK-ARMATUREN FÜR 4 UND 6 SPIRALSCHLÄUCHE RACORES INTERLOCK PARA MANGUERA 4 Y 6 ESPIRALES FS43I METRIC METRIC HEAVY FEMALE SWIVEL - 45° ELBOW (24° CONE SEAT) A CH D FEMMINA METRICA 45° O-RING CONO 24° SERIE PESANTE DKOS 45° - 24° konus B T HEMBRA GIRATORIA A 90° METRICA cono 24° serie pesada FS43I CODE CODICE CODICE BEST.-NR CODIGO METRIC HEAVY FEMALE SWIVEL - 45° ELBOW (24° CONE SEAT) Ø HOSE Ø TUBO HOSE BORE Ø SCHLAUCH Ø MANGUERA DN INCH SIZE TT PIPE PIPE AA [mm] B B [in] [mm] D D [in] [mm] [in] [mm] [in] CH inin FS43I-10-30 DN 16 INCH 5/8" SIZE 10 M30X2 S20 [mm] 2,30 [in] 58,4 FS43I-10-30 FS43I-12-36 16 19 5/8” 3/4" 10 12 M30X2 M36X2 S20 S25 64,6 76,5 2,54 3,01 3 3,5 0,120,1433,528,61,32 1,1346 36 1,811 1,417 1.13/16"1.7/16” FS43I-16-42 FS43I-12-36 25 19 1" 3/4” 16 12 M42X2 M36X2 S30 S25 89,5 79,8 3,52 3,14 6 3 0,240,1234,834,71,37 1,3750 1,9685 1,811 2" 1.13/16” 46 FS43I-20-52 FS43I-16-42 25 31 1.1/4" 1” 20 M42X2 M52X2 S30 S38 115 4,53 6,5 0,26 46,5 1,83 60 50 38 1.1/2" 24 M52X2 S38 125,1 4,93 6,5 0,26 48,5 1,91 60 2,3622 FS43I-24-52 FS43I-20-52 31 1.1/4” FS43I-24-52 38 1.1/2” 16 20 M52X2 S38 24 M52X2 S38 89,5 115,1 134,5 3,52 4,53 5,30 [mm] 0,14[in] 25,9[mm]1,02 3,5 CH 6 6,5 6,5 0,24 34,8 [in]36 [mm] 1,4173 [in] 1.7/16" 1,37 2,3622 2.3/8" 1,969 2.3/8" [in] 2” 0,26 46,5 1,83 60 2,362 2.3/8” 0,26 58,8 2,31 60 2,362 2.3/8” © Intertraco (Italia) S.p.A. All rights are reserved - 147 i INTERLOCK FITTINGS FOR 4 AND 6 SPIRAL HOSES RACCORDI INTERLOCK PER TUBI A 4 E 6 SPIRALI INTERLOCK-ARMATUREN FÜR 4 UND 6 SPIRALSCHLÄUCHE RACORES INTERLOCK PARA MANGUERA 4 Y 6 ESPIRALES FS93I METRIC METRIC HEAVY FEMALE SWIVEL - 90° ELBOW (24° CONE SEAT) A FEMMINA METRICA 90° O-RING CONO 24° SERIE PESANTE D DKOS 90° - 24° konus T FS93I CODE CODICE BEST.-NR CODIGO CODICE CH B HEMBRA GIRATORIA A 90° METRICA CONO 24° SERIE PESADA ØMETRIC HOSE HEAVY Ø TUBO Ø SCHLAUCH T Ø MANGUERA HOSE BORE T DN SIZE DN INCH INCH SIZE FEMALE SWIVEL - 90° ELBOW (24° CONE SEAT) PIPE A B D CH [in] [mm] [mm] [in][in][mm][mm][in] [in] [in]inin [in] [mm][mm] [in] 2,03 2,11 3,53,5 0,140,14 53 57,52,09 2,2636 1,4173 1,417 1.7/16" 1.7/16” 36 2,76 2,76 1,811 1,811 1.13/16"1.13/16” 46 5/8" 5/8” 10 10 M30X2 M30X2 S20 S20 51,5 53,5 FS93I-12-36 FS93I-12-36 19 19 3/4" 3/4” 12 12 M36X2 M36X2 S25 S25 70 70 25 1" 16 1.1/4" 20 1.1/2" 24 25 FS93I-20-52 31 1.1/4” FS93I-24-52 38 1.1/2” FS93I-20-52 FS93I-24-52 31 38 1” M42X2 79 3,11 S38 94,7 3,73 6,5 S38 109,5 4,31 6,5 M42X2 S30 20 M52X2 S38 24 M52X2 S38 M52X2 3 3 6 S30 16 M52X2 CH A [mm] [mm] 16 16 FS93I-16-42 D PIPE FS93I-10-30 FS93I-10-30 FS93I-16-42 B 79 94,7 109,5 148 - © Intertraco (Italia) S.p.A. All rights are reserved 3,11 3,73 4,31 6 6,5 6,5 0,120,1272,572,52,85 2,8546 0,24 78 0,26 95,7 0,26 106 0,24 0,26 0,26 77 3,07 50 1,9685 2" [in] 3,03 50 1,969 2” 95,7 3,77 60 2,362 2.3/8” 120 4,72 60 2,362 2.3/8” 3,77 4,17 60 60 2,3622 2,3622 2.3/8" 2.3/8" i INTERLOCK FITTINGS FOR 4 AND 6 SPIRAL HOSES RACCORDI INTERLOCK PER TUBI A 4 E 6 SPIRALI INTERLOCK-ARMATUREN FÜR 4 UND 6 SPIRALSCHLÄUCHE RACORES INTERLOCK PARA MANGUERA 4 Y 6 ESPIRALES MJ10I JIC JIC 37° MALE B ES MASCHIO JIC CONO 37° T AGJ JIC-Anschlussstutzen 37° Konus mit UNF Gewinde MACHO FIJO JIC 37° A MJ10I CODE CODICE CODICE BEST.-NR CODIGO JIC 37° MALE Ø HOSE Ø TUBO HOSEØBORE SCHLAUCH Ø MANGUERA DN INCH SIZE MJ10I-12-12 19DN 3/4"INCH12 MJ10I-16-16 MJ10I-12-12 25 19 MJ10I-20-20 31 MJ10I-24-24 38 MJ10I-32-32 51 MJ10I-16-16 MJ10I-16-20 MJ10I-20-20 25 25 31 1" 3/4” 16 1.1/4" 20 1.1/2" 24 2" 32 1” T T AB A B ES [mm] [in] [mm] [in] 35,5 1,40 21,5 [mm] 0,85 [in] 32 [mm] 1,26 1.5/16" - 121.1/16” 45 - 121,77 35,5 23,1 12 0,91 1,40 36 1.7/16" 21,5 1,42 0,85 1.5/8" - 12 0,96 46 1,81 1,08 50 1,97 1,33 65 2,56 1.1/16" - 12 SIZE 60 2,36 50 1,97 61 2,40 24,3 16 1.5/16” - 12 45,1 1,78 16 1.5/8” - 12 56,8 2,24 1.1/4” 20 1.5/8” - 12 60 2,36 1” 1.7/8" - 12 2.1/2" - 12 27,5 33,9 [mm] ES 23,1 24,3 24,3 [in] inin [in]1.1/4" [mm] [in] 32 1,260 1.1/4” 36 1,417 1.7/16” 46 1,811 1.13/16” 0,96 46 1,811 1.13/16” 1.13/16" 0,91 0,96 2" 2.9/16" [in] MJ10I-20-24 31 1.1/4” 20 1.7/8” - 12 63,2 2,49 27,5 1,08 50 1,969 2” MJ10I-24-24 38 1.1/2” 24 1.7/8” - 12 50 1,97 27,5 1,08 50 1,969 2” MJ10I-32-32 51 2” 32 2.1/2” - 12 61 2,40 33,9 1,33 65 2,559 2.9/16” © Intertraco (Italia) S.p.A. All rights are reserved - 149 i INTERLOCK FITTINGS FOR 4 AND 6 SPIRAL HOSES RACCORDI INTERLOCK PER TUBI A 4 E 6 SPIRALI INTERLOCK-ARMATUREN FÜR 4 UND 6 SPIRALSCHLÄUCHE RACORES INTERLOCK PARA MANGUERA 4 Y 6 ESPIRALES FJ12I JIC JIC 37° FEMALE SWIVEL CH FEMMINA JIC DRITTA SV. 37° T DKJ JIC- Dichtkopf 37° Konus UNF Gewinde A FJ12I CODE CODICE CODICE BEST.-NR CODIGO FJ12I-10-10 HEMBRA GIRATORIA RECTA JIC CONO 37° B JIC 37° FEMALE SWIVEL Ø HOSE Ø TUBO HOSE BORE Ø SCHLAUCH DN INCH SIZE Ø MANGUERA 16 DN 5/8"INCH10 T T 7/8" - 14 SIZE A B A [mm] [in] [mm] 21 0,83 13,8 [mm] CH B [in] [mm] [in] 0,54 [in] 32[mm]1,26 13,8 0,54 0,83 32 1,26 16 0,63 38 1,50 16 0,63 38 1,50 16 0,63 50 0,81 0,63 FJ12I-12-12 19 FJ12I-12-16 19 FJ12I-16-16 25 FJ12I-16-20 25 FJ12I-16-16 FJ12I-20-20 31 25 1.1/4" 1” 20 16 1.5/8" - 12 1.5/16” 25,3 - 121,00 20,5 16 FJ12I-16-20 FJ12I-24-24 38 25 1.1/2" 1” 24 1.7/8" - 12 1.5/8” 28,9- 121,14 16 FJ12I-32-32 FJ12I-20-20 51 31 2.1/2" - 12 1.5/8” 33 - 121,30 25,3 24 20 FJ12I-24-24 38 1.1/2” 24 1.7/8” - 12 28,9 1,14 18,5 FJ12I-32-32 51 2” 32 2.1/2” - 12 33 1,30 24 FJ12I-10-10 FJ12I-12-12 FJ12I-12-16 16 19 19 3/4" 12 1.1/16" - 12 19,5 7/8” - 14 0,77 3/4" 12 1.5/16" - 12 19,5 0,77 1" 16 1.5/16" - 12 21 0,83 16 1.5/8" - 12 27 1,06 5/8” 1" 3/4” 3/4” 2"1.1/4”32 10 21 12 1.1/16” - 12 19,5 12 1.5/16” - 12 19,5 150 - © Intertraco (Italia) S.p.A. All rights are reserved 18,5 27 0,77 13,8 CH inin 1.1/4" [mm] [in] 1.1/4" 0,54 1.1/2" [in] [in] 32 1,260 1.1/4” 13,8 0,54 32 1,260 1.1/4” 16 0,63 38 1,496 1.1/2” 50 16 1,97 0,632" 38 1,496 1.1/2” 0,73 1,06 55 16 2,17 0,63 2.3/16" 50 1,969 2” 0,94 1,00 75 16 2,95 0,63 50 1,969 2” 0,73 55 2,165 2.3/16” 0,94 75 2,953 0,77 1,97 1.1/2" 2" i INTERLOCK FITTINGS FOR 4 AND 6 SPIRAL HOSES RACCORDI INTERLOCK PER TUBI A 4 E 6 SPIRALI INTERLOCK-ARMATUREN FÜR 4 UND 6 SPIRALSCHLÄUCHE RACORES INTERLOCK PARA MANGUERA 4 Y 6 ESPIRALES FJ42I JIC JIC 37° FEMALE SWIVEL - 45° ELBOW A CH T D FEMMINA JIC 45° SV. 37° DKJ 45° - 37° konus HEMBRA GIRATORIA A 45° JIC 37° B FJ42I CODE CODICE BEST.-NR CODIGO CODICE FJ42I-12-12 FJ42I-12-12 FJ42I-16-16 FJ42I-16-16 Ø JIC HOSE 37° FEMALE Ø TUBO Ø SCHLAUCH T ØHOSE MANGUERA BORE DN DN 1919 2525 INCH SIZE SWIVEL - 45° ELBOW T INCH SIZE 3/4” 1212 1.1/16” - 12 3/4" 1.1/16" - 12 1”1" 1616 1.5/16” 1.5/16"--12 12 1”1" A [mm] [mm] A B [in] [in] [mm] [mm] 73,5 68 2,68 2,89 81 82 B D CH D CH [in] [in] [mm] [in] [mm] [mm] [in] [mm] [in] [in] 13,8 13,8 0,54 0,54 28,3 31 1,11 1,22 3232 1,260 1,2598 1.1/4" 3,19 3,23 16 16 0,63 0,63 32 42 1,26 1,65 3838 1,496 1,4961 1.1/2” 1.1/2" in[in] in 1.1/4” FJ42I-16-20 FJ42I-16-20 2525 1616 1.5/8” 1.5/8"--12 12 89,2 89,2 3,51 3,51 16 16 0,63 0,63 39,2 39,2 1,54 1,54 5050 1,969 1,9685 2” 2" FJ42I-20-20 FJ42I-20-20 3131 1.1/4” 1.1/4" 2020 1.5/8” 1.5/8"--12 12 95,1 101,7 3,74 4,00 16 16 0,63 0,63 36,3 37,7 1,43 1,48 5050 1,969 1,9685 2” 2" FJ42I-24-24 FJ42I-24-24 3838 1.1/2” 1.1/2" 2424 1.7/8” 1.7/8"--12 12 116,5 126,5 4,59 4,98 18,5 18,5 0,73 0,73 49,2 51 1,94 2,01 5555 2,165 2.3/16” 2,1654 2.3/16" FJ42I-32-32 FJ42I-32-32 5151 3232 2.1/2"--12 12 2.1/2” 148 148 5,83 5,83 24 24 0,94 0,94 64 64 2,52 2,52 7575 2,9528 2,953 2”2" © Intertraco (Italia) S.p.A. All rights are reserved - 151 i INTERLOCK FITTINGS FOR 4 AND 6 SPIRAL HOSES RACCORDI INTERLOCK PER TUBI A 4 E 6 SPIRALI INTERLOCK-ARMATUREN FÜR 4 UND 6 SPIRALSCHLÄUCHE RACORES INTERLOCK PARA MANGUERA 4 Y 6 ESPIRALES FJ92I JIC JIC 37° FEMALE SWIVEL - 90° ELBOW A B D FEMMINA JIC 90° SV. 37° DKJ 90° - 37° konus HEMBRA GIRATORIA A 90° JIC 37° T FJ92I CODE CODICE BEST.-NR CODICE CODIGO CH Ø HOSE JIC 37° FEMALE SWIVEL - 90° ELBOW Ø TUBO Ø SCHLAUCH Ø MANGUERA HOSE BORE DN INCH INCH SIZE SIZE DN T T A A B [mm][mm] [in] [in] [mm] [mm] [in] FJ92I-10-10 FJ92I-10-10 16 16 5/8" 5/8” 1010 FJ92I-12-12 19 12 1.1/16" - 12 59,2 FJ92I-12-16 19 3/4" 19 3/4" 12 1.5/16" - 12 54,5 FJ92I-16-16 25 1" 16 1.5/16" - 12 68 FJ92I-16-20 25 1" 16 1.5/8" - 12 75,6 FJ92I-16-20 FJ92I-20-20 25 31 1” 1.1/4" 2016 FJ92I-20-20 FJ92I-24-24 38 31 1.1/2" 1.1/4” 2420 FJ92I-32-32 FJ92I-24-24 51 38 FJ92I-32-32 51 FJ92I-12-12 FJ92I-12-16 FJ92I-16-16 19 25 3/4” 3/4” 1” 12 12 16 B 7/8"7/8” - 14 - 14 53,7 53,7 2,11 2,11 13,8 1.1/16” - 12 2,33 59,2 2,15 13,8 2,33 16 32 D CH [mm] [in] CH [in] [mm] [mm] [in] [in] [mm] 58,8 0,54 2,31 53,5 32 2,11 1,2598 32 1.1/4" 1,260 1.1/4” 1.1/4” inin[in] 0,54 59 0,54 2,32 58,8 32 2,31 1,2598 1.1/4" 0,63 56 2,20 38 1,4961 1.1/2" 77 3,03 38 1,4961 1.1/2" 1,9685 2" 13,8 2,15 16 0,63 1.5/16” - 12 69 2,72 16 0,63 79,5 3,13 50 1.5/8” 1.5/8" - 12 - 1286,8 76,6 3,42 3,02 16 16 0,63 0,63 83 79,5 3,27 3,13 1,9685 50 50 2"1,969 2” 1.7/8" - 12 - 12105 79,7 4,13 3,14 18,5 1.5/8” 0,73 16 105 0,63 4,13 77 55 3,03 2,1654 50 2.3/16" 1,969 2” 0,94 18,5 129 0,73 5,08 100 75 3,94 2,9528 55 2,165 24 0,94 140 5,51 2,953 2,98 16 16 2.1/2” - 12 122 152 - © Intertraco (Italia) S.p.A. All rights are reserved 4,80 0,63 0,63 71 2,20 2,80 38 1,260 54,5 2,68 56 32 [in] 1.5/16” - 12 2" 3224 2.1/2" - 12 - 12133 102 5,24 4,02 24 1.1/2” 1.7/8” 2” 0,54 13,8 D 38 75 1,496 1.1/2” 1,496 1.1/2” 2.3/16” i INTERLOCK FITTINGS FOR 4 AND 6 SPIRAL HOSES RACCORDI INTERLOCK PER TUBI A 4 E 6 SPIRALI INTERLOCK-ARMATUREN FÜR 4 UND 6 SPIRALSCHLÄUCHE RACORES INTERLOCK PARA MANGUERA 4 Y 6 ESPIRALES OR13I orfs ORFS FEMALE SWIVEL CH FEMMINA ORFS DIRITTA ORFS - Armatur Innengewinde HEMBRA GIRATORIA RECTA ORFS T ES CH ES C A T B C ORFS FEMALE SWIVEL OR13I CODE CODICE CODICE BEST.-NR OR13I-12-12 CODIGO OR13I-16-16 Ø HOSE HOSE BORE Ø TUBO Ø SCHLAUCH DN INCH SIZE Ø19MANGUERA 3/4" 12 T A A B B ES ES [in] [mm] [in] [mm] [in] inin [mm] [in] 1.3/16" - 12 42,1 1,66 14,5 0,57 30 1,18 1.3/16" 36 1.7/16" - 12 50 1,97 14,8 0,58 36 1,42 [in] 41 1.7/16" 1,42 1,66 2,05 14,5 14,8 0,57 0,58 A41 30 1,18 1,61 1.5/8" B ORFS FEMALE SWIVEL [mm] [in] [mm] [in] [mm] OR13I-12-12 OR12I-16-20 19 25 3/4”1" 1216 1.3/16” - 12 1.11/16" - 12 42,1 52 OR12I-20-20 25 31 1” OR13I-16-16 16 HOSE BORE T 14,8 1.11/16" - 12 51,2 2,02 14,8 1.7/16” 50 1,97 DN- 12 INCH SIZE [in] 31 25 - 12 1" OR13I-16-16 51,2 162,02 1.7/16" 14,8- 12 0,5850 1.1/4” 20 1.11/16” OR12I-16-20 25 1" 16 1.11/16" - 12 52 31 1.1/4" 20 1.11/16" - 12 51,2 31 1.1/4" 20 2" - 12 57,4 OR12I-20-24 31 1.1/4” 20 2” -type 12 Nut OR12I-24-24 38 1.1/2” 24 2” - 12 OR12 OR12I-20-20 OR12I-20-24 57,4 58,7 CH in in 1.7/16" [mm]1,61 [in] 1.5/8" [in] 1.3/16” 50 36 1,97 1,4172" 1.7/16” ES 0,58 41[in] 1,61 50 0,58 1,42 1.7/16” 41 1,97 [mm] 36 [mm] 1.5/8" [in] [mm] [in]1,6142"inin1.5/8” [mm] 2"19 - 12 57,4122,05 2,261.3/16" 14,8 0,58 501,66 1,97 OR12I-20-24 25 31 1”1.1/4" - 12 0,58 42,1 41 14,5 OR13I-12-12 - 12 3/4"52 14,8 1,61 OR12I-16-20 1620 1.11/16” OR12I-20-20 CH [mm] T DN 25 INCH1"OR13I SIZE 16 CODICE 1.1/4" 20 B 14,8 411,97 1,61 2,05 3650 1,417 1.7/16" 2” 41 1,969 1,614 0,58 41 1,614 1.5/8" 50 1,969 14,8 0,58 41 1,614 1.5/8" 50 1,969 14,8 0,58 50 1,969 2" 60 2,362 14,8 0,58 50 1,97 2,31 14,8 0,58 50 1,969 2,26 0,58 1.5/8” 2” 2” 60 60 2,362 2.3/8” 2,362 2.3/8” Nut type OR13 OR12 NUT TYPE TIPO DI DADO HUTTER TYP TIPO DE TUERCA © Intertraco (Italia) S.p.A. All rights are reserved - 153 I Series Catalogue_Rev01.2007.xls [in] 1,417 14,8 2,26 2,02 2" 2.3/8" 0,57 603050 2,36 1,181 1.3/16" 2” 36 1.5/8” 1,969 CH Pagina 19 di 42 i INTERLOCK FITTINGS FOR 4 AND 6 SPIRAL HOSES RACCORDI INTERLOCK PER TUBI A 4 E 6 SPIRALI INTERLOCK-ARMATUREN FÜR 4 UND 6 SPIRALSCHLÄUCHE RACORES INTERLOCK PARA MANGUERA 4 Y 6 ESPIRALES OR43I orfs ORFS FEMALE SWIVEL - 45° ELBOW A FEMMINA ORFS 45° ORFS - Armatur 45° HEMBRA GIRATORIA A 45° ORFS D CH T A B D CH Ø HOSE Ø TUBO HOSE BORE Ø SCHLAUCH DNØ MANGUERA INCH SIZE 19 DN OR43I-16-16 25 OR42I-20-20 31 OR42I-16-20 25 OR42I-20-20 31 OR43I-12-12 19 OR43I-16-16 25 OR92 3/4" INCH 1" 3/4” B CODE CODICE CODICE BEST.-NR CODIGO OR43I-12-12 ORFS FEMALE SWIVEL - 45° ELBOW T OR43I T A B A D B CH D [in] [mm] [in] [mm] [in] 12 SIZE 1.3/16" - 12 61,4 2,42 [mm] 14,5 [in] 0,57 [mm] 23,2 [in] 0,91 1.7/16"[in] [mm] 36[in]1,4173 [mm] 16 79,9 3,15 14,8 0,58 31 12 1” 16 1” 16 1.7/16" - 12 1.3/16” - 12 61,4 2,42 14,5 0,57 1,22 23,2 [mm] 41 [in] CH [mm] OR43I 1.1/4" 20 inin 1,6142 0,91 36 - 45°1,48 ELBOW 1.11/16" - ORFS 12 101 FEMALE 3,98 14,8SWIVEL 0,58 37,5 50 1,9685 CODICE 1.1/4” T 1.7/16” - 12 79,9 3,15 14,8 0,58 1.11/16” 12 85,6 HOSE -BORE 3,37 14,8 A0,58 3,74 [mm] 0,58 [in] 14,8 T type INCH DN 20 Nut1.11/16” - 12 SIZE 95,1 31 1,22 38,7 B 1,52 41 1.5/8" 2" [in] 1,417 1.7/16” 1,614 1.5/8” 50 D 1,969 [mm] 36,3 [in] 1,43 [mm] 50 2” CH [in] 1,969[mm] 2”[in] inin OR43I-12-12 19 3/4" 12 1.3/16" - 12 61,4 2,42 14,5 0,57 23,2 0,91 36 1,417 1.7/16" OR43I-16-16 25 1" 16 1.7/16" - 12 79,9 3,15 14,8 0,58 31 1,22 41 1,614 1.5/8" OR42I-20-20 31 1.1/4" 20 1.11/16" - 12 101 3,98 14,8 0,58 37,5 1,48 50 1,969 2" Nut type OR43 OR42 NUT TYPE TIPO DI DADO HUTTER TYP TIPO DE TUERCA 154 - © Intertraco (Italia) S.p.A. All rights are reserved i INTERLOCK FITTINGS FOR 4 AND 6 SPIRAL HOSES RACCORDI INTERLOCK PER TUBI A 4 E 6 SPIRALI INTERLOCK-ARMATUREN FÜR 4 UND 6 SPIRALSCHLÄUCHE RACORES INTERLOCK PARA MANGUERA 4 Y 6 ESPIRALES OR93I orfs ORFS FEMALE SWIVEL - 90° ELBOW A FEMMINA ORFS 90° D ORFS - Armatur 90° HEMBRA GIRATORIA A 90° ORFS B A T CH DN CODE OR93I-12-12 19 CODICE BEST.-NR OR92I-20-20 CODIGO OR93I-16-16 25 31 T ØSIZE HOSE TUBO1.3/16" - 12 3/4" Ø 12 1"Ø SCHLAUCH 16 1.7/16" - 12 Ø MANGUERA 1.1/4" 20 1.11/16" - 12 INCH DN INCH OR93I-12-12 19 3/4”Nut type 12 OR93I-16-16 25 OR92 OR92I-16-20 25 OR92I-20-20 31 SIZE A B D CH [mm] [in] [mm] [in] [mm] [in] [mm] 57 2,24 14,5 0,57 51,5 2,03 36 69 T2,72 14,8 0,58 71 2,80 41 96 3,78 14,8 3,27 50 A T0,58 B HOSE BORE CODICE D ORFS FEMALE SWIVEL - 90° ELBOW OR93I 83 CH [mm] [in] [mm] [in] B inin 1,4173 1.7/16" 1,6142 1.5/8" 1,9685 2" [in] D CH [mm] [in] [mm] [in] 1.3/16” - 12 57 2,24 14,5 0,57 51,5 2,03 36 1,417 1.7/16” 71 2,80 41 1,614 1.5/8” ORFS FEMALE SWIVEL - 90° ELBOW OR93I 1” 16 1.7/16” - 12 69 2,72 14,8 0,58 1” 16 1.11/16” 12 69 HOSE -BORE 2,72 14,8 A0,58 1.1/4” 20 DN INCH 1.11/16” - 12 SIZE 79,7 3,14 [mm] 0,58 [in] 14,8 CODICE [in] T 77 B 3,03 50 D 1,969 [mm] 77 [in] 3,03 [mm] 50 2” CH [in] 1,969[mm] 2”[in] inin OR93I-12-12 19 3/4" 12 1.3/16" - 12 57 2,24 14,5 0,57 51,5 2,03 36 1,417 1.7/16" OR93I-16-16 25 1" 16 1.7/16" - 12 69 2,72 14,8 0,58 71 2,80 41 1,614 1.5/8" OR92I-20-20 31 1.1/4" 20 1.11/16" - 12 96 3,78 14,8 0,58 83 3,27 50 1,969 2" Nut type OR93 OR92 NUT TYPE TIPO DI DADO HUTTER TYP TIPO DE TUERCA I Series Catalogue_Rev01.2007.xls Pagina 21 di 42 The document is exclusive property of INTERTRACO S.p.A.. All rights are reserved. © Intertraco (Italia) S.p.A. All rights are reserved - 155 i INTERLOCK FITTINGS FOR 4 AND 6 SPIRAL HOSES RACCORDI INTERLOCK PER TUBI A 4 E 6 SPIRALI INTERLOCK-ARMATUREN FÜR 4 UND 6 SPIRALSCHLÄUCHE RACORES INTERLOCK PARA MANGUERA 4 Y 6 ESPIRALES MN10I NPTF NPTF MALE (60° CONE SEAT) B ES MASCHIO NPTF SV. 60° T AGN Anschlussstutzen mit konischem NPTF-Gewinde selbstdichtend 60° konus MACHO FIJO NPTF CONO 60° A MN10I CODE CODICE CODICE BEST.-NR CODIGO MN10I-06-06 NPTF MALE (60° CONE SEAT) Ø HOSE Ø TUBO HOSE BORE Ø SCHLAUCH DN INCH SIZE Ø MANGUERA 10 06 DN 3/8" INCH MN10I-12-12 19 MN10I-16-16 25 MN10I-20-20 31 MN10I-24-24 38 MN10I-20-20 MN10I-32-32 51 31 2" 1.1/4” 32 MN10I-06-06 MN10I-12-12 MN10I-16-16 10 19 3/4" 1.1/4" 25 1.1/2" T A B A [mm] [in] [mm] 3/8" - 18 SIZE 29 1,14 14 [mm] 12 3/4" - 14 06 40 3/8” - 18 1,57 16 1" - 11.1/2 46 1,81 20 1 1/4" - 11.1/2 60,2 2,37 24 1 1/2" - 11.1/2 61,5 2,42 3/8” 1" T 3/4” 1” 12 3/4” - 14 16 1” - 11.1/2 ES B [in] [mm] [in] 0,55 [in] 19[mm] 0,75 19 0,75 30 24 0,94 36 24,5 0,96 46 25,5 1,00 50 29 40 46 20- 11.1/21 1/4”76 - 11.1/2 2" 2,99 60,2 26 1,14 1,57 1,81 14 19 24 1,18 1,42 1,81 1,97 ES inin [in]3/4" [mm] 1.3/16" 0,55 [in] [in] 19 0,748 3/4” 0,75 30 1,181 1.3/16” 0,94 36 1,417 1.7/16” 46 1,811 1.13/16” 1.7/16" 1.13/16" 2" 2,37 65 24,52,56 0,96 1,02 2.9/16" MN10I-24-24 38 1.1/2” 24 1 1/2” - 11.1/2 61,5 2,42 25,5 1,00 50 1,969 2” MN10I-32-32 51 2” 32 2” - 11.1/2 76 2,99 26 1,02 65 2,559 2.9/16” 156 - © Intertraco (Italia) S.p.A. All rights are reserved i INTERLOCK FITTINGS FOR 4 AND 6 SPIRAL HOSES RACCORDI INTERLOCK PER TUBI A 4 E 6 SPIRALI INTERLOCK-ARMATUREN FÜR 4 UND 6 SPIRALSCHLÄUCHE RACORES INTERLOCK PARA MANGUERA 4 Y 6 ESPIRALES SAE 3000 CODE 61 Ax10i SAE 3000 CODE 61 STRAIGHT FLANGE A FLANGIA DIRITTA SAE 3000 C SFL gerade AX10I CODE CODICE CODICE BEST.-NR CODIGO BRIDA RECTA SAE 3000 PSI SAE 3000 CODE 61 STRAIGHT FLANGE Ø HOSE Ø TUBO HOSE BORE Ø SCHLAUCH FLANGE Ø MANGUERA DN INCH SIZE A [mm] [in] [mm] 1,46 38 AX10I-12-12 19 3/4" DN 12 INCH 3/4" AX10I-12-16 AX10I-12-12 19 3/4" 19 12 3/4” 1" 12 43,5 AX10I-16-12 AX10I-12-16 25 1" 19 16 3/4” 3/4" 12 47 AX10I-16-16 25 1" 16 1" AX10I-16-20 25 1" 16 AX10I-20-16 31 1.1/4" 20 AX10I-16-20 AX10I-20-20 31 25 1.1/4" 20 1” 1.1/4" 16 46,5 1.1/4”50,8 1,83 AX10I-20-16 AX10I-20-24 31 31 1.1/4" 20 1.1/4” 1.1/2" 20 50,2 1,98 1” 60,3 AX10I-24-24 AX10I-20-20 38 1.1/2" 31 24 1.1/4” 1.1/2" 20 50,5 AX10I-24-32 38 1.1/2" 31 24 AX10I-32-32 51 2" 32 AX10I-16-12 AX10I-16-16 AX10I-20-24 AX10I-24-24 25 25 38 1” 1” 1.1/4" 1.1/4” 1.1/2” 1" 2" 2" SIZE FLANGE 16 16 20 24 37 A C C [in] 1,50 [mm] [in] [mm] [in] 1,713/4”44,5 1,75 37 1,46 38 1,50 1,85 1,50 43,5 1,71 44,5 1,75 47 1,85 38 1,50 44,5 1,75 44,5 1,75 2,00 44 1,73 50,8 2,00 2,37 59,2 2,33 44,5 1,75 1” 38 44,5 1,75 44,5 1,75 40 1,57 50,8 2,00 44,5 1,75 44,5 1,75 3/4” 1” 1,99 1.1/4”60,3 2,37 46,7 1,84 50,8 2,00 72 2,83 71,4 2,81 50,2 1,98 60,3 2,37 73,5 2,89 71,4 2,81 50,5 1,99 60,3 2,37 1.1/2” 1.1/2” AX10I-24-32 38 1.1/2” 24 2” 72 2,83 71,4 2,81 AX10I-32-32 51 2” 32 2” 73,5 2,89 71,4 2,81 © Intertraco (Italia) S.p.A. All rights are reserved - 157 i INTERLOCK FITTINGS FOR 4 AND 6 SPIRAL HOSES RACCORDI INTERLOCK PER TUBI A 4 E 6 SPIRALI INTERLOCK-ARMATUREN FÜR 4 UND 6 SPIRALSCHLÄUCHE RACORES INTERLOCK PARA MANGUERA 4 Y 6 ESPIRALES Ax30i SAE 3000 CODE 61 SAE 3000 CODE 61 30° ELBOW FLANGE A FLANGIA 30° SAE 3000 D SFL 30° Bogenarmatur C BRIDA A 30° SAE 3000 PSI CODE CODICE AX30I BEST.-NR CODIGO Ø HOSE Ø TUBO SAE 3000 CODE Ø SCHLAUCH FLANGE Ø MANGUERA DN INCH SIZE CODICE AX30I-20-24 31 1.1/4” 20 AX30I-24-24 38 1.1/2” 24 25 1" 16 38 1.1/2” 24 31 1.1/4" 20 51 2” 32 31 1.1/4" 20 AX10I-16-16 AX30I-24-32 AX10I-20-20 AX30I-32-32 AX10I-20-24 HOSE BORE DN INCH SIZE C 61 - 30° AELBOW FLANGE FLANGE 1.1/2” 1.1/2” 1" 2” 1.1/4" 2” 1.1/2" [mm] [in] 85,3 3,36 [mm] A [in] [mm] [in] [mm] [in] 60,3 2,37 19 0,75 2,37 28,3 1,11 2,81 28,9 1,14 2,81 32,3 1,27 C [mm] [in] 116 44,5 121,5 46,5 135,1 50,2 4,57 60,3 1,75 44,5 1,75 4,78 71,4 1,83 50,8 2,00 5,32 71,4 1,98 60,3 2,37 AX10I-24-24 38 1.1/2" 24 1.1/2" 50,5 1,99 60,3 2,37 AX10I-24-32 38 1.1/2" 24 2" 72 2,83 71,4 2,81 AX10I-32-32 51 2" 32 2" 73,5 2,89 71,4 2,81 158 - © Intertraco (Italia) S.p.A. All rights are reserved D i INTERLOCK FITTINGS FOR 4 AND 6 SPIRAL HOSES RACCORDI INTERLOCK PER TUBI A 4 E 6 SPIRALI INTERLOCK-ARMATUREN FÜR 4 UND 6 SPIRALSCHLÄUCHE RACORES INTERLOCK PARA MANGUERA 4 Y 6 ESPIRALES Ax40i SAE 3000 CODE 61 SAE 3000 CODE 61 - 45° ELBOW FLANGE A FLANGIA 45° SAE 3000 SFL 45° Bogenarmatur C D BRIDA A 45° SAE 3000 PSI CODE CODICE BEST.-NR AX40I CODIGO Ø HOSE Ø TUBO Ø SCHLAUCH FLANGE SAE 3000 CODE Ø MANGUERA DN INCH SIZE AX40I-12-12 19HOSE 3/4”BORE 12 AX40I-12-16 DN 19 AX40I-16-16 AX40I-12-12 2519 1” 3/4" AX40I-16-20 AX40I-12-16 2519 AX40I-20-20 AX40I-16-16 CODICE INCH 12 SIZE 3/4” 3/4” A C D 61 - 45° ELBOW FLANGE FLANGE [mm] [in] 68,5A 2,70 [mm] C 38 [in] [mm] [in] 1,50 D 26,7 1,05 [mm] 1,75 [in] 30,6 1,20 1” [mm] 68 [in] 2,68[mm] 44,5 [in] 1612 1” 3/4" 82,5 68,5 2,703,25 38 44,5 1,50 1,75 27 32,5 1,06 1,28 1” 3/4" 1612 1.1/4” 1" 83 68 2,683,27 44,5 50,8 1,75 2,00 31 34,5 1,22 1,36 3125 1.1/4” 1" 2016 1.1/4” 1" 84,3 82,5 3,253,32 44,5 50,8 1,75 2,00 32,5 1,2831 1,22 AX40I-20-24 AX40I-16-20 3125 1.1/4” 1" 2016 1.1/2” 1.1/4" 87,1 83 3,273,43 50,8 60,3 2,00 2,37 34,5 1,3631 1,22 AX40I-24-24 AX40I-20-20 3831 1.1/2” 1.1/4" 2420 1.1/2” 1.1/4" 123 96,5 3,804,84 50,8 60,3 2,00 2,37 38 46,5 1,50 1,83 AX40I-24-32 AX40I-20-24 3831 1.1/2” 1.1/4" 2420 2” 1.1/2" 123,5 87,1 3,434,86 60,3 71,4 2,37 2,81 31 50,5 1,22 1,99 AX40I-32-32 AX40I-24-24 5138 2” 3224 1.1/2" 2” 1.1/2" 140 123 4,845,51 60,3 71,4 2,37 2,81 46,5 53,2 1,83 2,09 AX40I-24-32 38 1.1/2" 24 2" 123,5 4,86 71,4 2,81 50,5 1,99 AX40I-32-32 51 2" 32 2" 144 5,67 71,4 2,81 52 2,05 © Intertraco (Italia) S.p.A. All rights are reserved - 159 i INTERLOCK FITTINGS FOR 4 AND 6 SPIRAL HOSES RACCORDI INTERLOCK PER TUBI A 4 E 6 SPIRALI INTERLOCK-ARMATUREN FÜR 4 UND 6 SPIRALSCHLÄUCHE RACORES INTERLOCK PARA MANGUERA 4 Y 6 ESPIRALES SAE 3000 CODE 61 Ax60i SAE 3000 CODE 61 - 60° ELBOW FLANGE A FLANGIA 60° SAE 3000 D SFL 60° Bogenarmatur BRIDA A 60° SAE 3000 PSI C AX60I CODE CODICE BEST.-NR CODICE CODIGO AX60I-16-16 AX60I-16-16 SAE 3000 CODE 61 - 60° ELBOW FLANGE Ø HOSE Ø TUBO Ø SCHLAUCH FLANGE A HOSE BORE Ø MANGUERA FLANGE [mm] DN INCH SIZE DN INCH SIZE 25 25 AX60I-20-20 31 AX60I-20-24 31 AX60I-24-24 AX60I-32-32 51 38 AX60I-32-32 51 AX60I-20-20 AX60I-20-24 AX60I-24-24 31 1" 1” 16 1.1/4" 20 1.1/4" 20 1.1/4” 16 20 1.1/4”24 38 31 1.1/2" 1" 1.1/4" 1.1/2" 20 1.1/2" 2"1.1/2”32 24 2" 2” 32 A C [in] 102,5 4,04 120 4,72 93,1 3,67 1” 1.1/4” 1.1/2” 150 1.1/2” 195,5 2” [mm] [in] [mm] 44,5 1,75 41,6 50,8 2,00 53 60,3 2,37 44 75 [mm] 102,5 93,7 5,91 93,1 60,3 7,70149,9 71,4 195,5 160 - © Intertraco (Italia) S.p.A. All rights are reserved C D [in] [in] D [mm] [in] [mm] [in] 44,5 1,75 41,6 1,64 50,8 2,00 43,9 1,73 3,67 65,3 2,37 60,3 2,57 2,37 44 1,73 5,90 2,81 60,3 2,95 2,37 65,3 2,57 71,4 2,81 75 2,95 4,04 3,69 7,70 1,64 2,09 1,73 i INTERLOCK FITTINGS FOR 4 AND 6 SPIRAL HOSES RACCORDI INTERLOCK PER TUBI A 4 E 6 SPIRALI INTERLOCK-ARMATUREN FÜR 4 UND 6 SPIRALSCHLÄUCHE RACORES INTERLOCK PARA MANGUERA 4 Y 6 ESPIRALES SAE 3000 CODE 61 Ax90i SAE 3000 CODE 61 - 90° ELBOW FLANGE A FLANGIA 90° SAE 3000 SFL 90° Bogenarmatur D BRIDA A 90° SAE 3000 PSI C AX90I CODE Ø HOSE SAE 3000 CODE 61 - 90° ELBOW FLANGE Ø TUBO Ø SCHLAUCH FLANGE Ø MANGUERA HOSE BORE A FLANGE [mm] DNDN INCHINCH SIZE SIZE [in] [mm] [mm] AX90I-12-12 AX90I-12-12 19 19 3/4" 3/4”12 12 3/4" 3/4”63 2,48 AX90I-12-16 AX90I-12-16 12 1" 1” 59 AX90I-16-16 19 19 3/4" 3/4”12 25 1" 16 1" 75 AX90I-16-20 25 76 2,99 AX90I-20-20 31 83,7 3,30 CODICE BEST.-NR CODIGO CODICE AX90I-16-16 AX90I-16-20 AX90I-20-16 AX90I-20-24 25 25 1” 1" 1.1/4" 1” 16 20 1.1/4” 31 31 1.1/4" 20 16 16 1.1/4" 1.1/4" AX90I-20-20 AX90I-24-24 1.1/4” 38 31 1.1/2" 24 20 1.1/2" 20 1.1/2" AX90I-24-32 AX90I-20-24 38 31 1.1/2" 24 1.1/4” 20 2" AX90I-32-32 AX90I-24-24 51 1.1/2” 24 2" 38 2" 32 1” 1.1/4” 1”82,3 A C C D D [in][in] [mm] [mm] [in] [in] [mm] [in] 6338 1,50 2,48 56,5 2,22 38 1,50 56,5 2,22 2,32 44,5 59 1,75 2,32 59,5 2,34 44,5 1,75 59,5 2,34 2,95 44,5 1,75 67,5 50,8 2,00 71 44,5 1,75 67,5 2,66 50,8 2,00 69,2 50,8 2,00 71 2,80 44,5 2,72 1,75 93 3,66 3,24 75 76 99 60,3 2,95 2,99 3,90 69,2 2,37 2,66 2,80 2,72 1.1/4” 109,5 4,31 83,7 60,3 3,30 103,5 50,8 2,37 4,07 2,00 69,2 2,72 109,5 1.1/2” 4,31 82,3 71,4 2,81 3,24 104 4,09 60,3 2,37 69,2 2,72 5,71 2,81 4,84 60,3 2,37 103,5 4,07 145 1.1/2” 71,4 109,5 4,31 123 AX90I-24-32 38 1.1/2” 24 2” 109,5 4,31 71,4 2,81 104 4,09 AX90I-32-32 51 2” 32 2” 145 5,71 71,4 2,81 123 4,84 © Intertraco (Italia) S.p.A. All rights are reserved - 161 i INTERLOCK FITTINGS FOR 4 AND 6 SPIRAL HOSES RACCORDI INTERLOCK PER TUBI A 4 E 6 SPIRALI INTERLOCK-ARMATUREN FÜR 4 UND 6 SPIRALSCHLÄUCHE RACORES INTERLOCK PARA MANGUERA 4 Y 6 ESPIRALES SAE 6000 CODE 62 Ay10i SAE 6000 CODE 62 STRAIGHT FLANGE A FLANGIA DIRITTA SAE 6000 SFS gerade C BRIDA RECTA SAE 6000 PSI AY10I CODE CODICE CODICE BEST.-NR CODIGO SAE 6000 CODE 62 STRAIGHT FLANGE Ø HOSE Ø TUBO HOSE BORE Ø SCHLAUCH FLANGE DN INCH ØSIZE MANGUERA [mm] FLANGE C [in] [mm] [in] SIZE 1,42 31,8 1,25[mm] [in] [mm] [in] 10 41 1,61 1/2” 41,3 1,63 36 1,42 31,8 1,25 41 1,61 41,3 1,63 41 1,61 41,3 1,63 56,5 2,22 47,6 1,87 53 2,09 41,3 1,63 41 1,61 41,3 1,63 57,5 2,26 47,6 1,87 56,5 2,22 47,6 1,87 2,13 53 2,09 41,3 1,63 1,87 57,5 2,26 47,6 1,87 2,13 64,5 2,54 54 2,13 64,2 2,53 47,6 1,87 67,2 2,65 54 2,13 5/8" DN 10 AY10I-10-12 AY10I-10-08 16 5/8" 16 10 5/8” 3/4" AY10I-12-12 19 3/4" 12 AY10I-12-16 19 3/4" 12 AY10I-16-12 25 1" 16 AY10I-16-16 25 1" 16 AY10I-16-12 AY10I-16-20 25 25 1" 16 1” 1.1/4" 16 64,5 AY10I-20-16 AY10I-16-16 31 1.1/4" 25 20 1” 16 64,2 2,531” AY10I-20-20 AY10I-16-20 31 1.1/4" 25 20 1” 1.1/4" 16 67,2 2,65 1.1/4” 54 AY10I-20-24 31 1.1/4" 20 1.1/2" 73,2 2,88 63,5 2,50 AY10I-24-20 38 1.1/2" 24 104,5 4,11 54 2,13 AY10I-24-24 38 1.1/2" 24 73 63,5 2,50 AY10I-24-32 38 1.1/2" 24 AY10I-24-20 AY10I-32-24 51 38 2" 1.1/4” 2" 20 82 32 1.1/2”1.1/2" 24 112 2,87 AY10I-32-32 AY10I-24-24 51 2" 38 32 1.1/2” 2" AY10I-24-32 38 1.1/2” 24 AY10I-32-24 51 2” AY10I-32-32 51 2” AY10I-12-12 AY10I-12-16 AY10I-20-16 AY10I-20-20 AY10I-20-24 16 19 19 31 31 31 3/4" 5/8” 1" 3/4” 3/4" 3/4” 1" 1" 10 12 12 1.1/4» 20 1.1/4” 20 1.1/4" 1.1/2" 3/4” 3/4” 1” 3/4” 54 2,54 1» 1.1/4” 47,6 [in] 3,23 3,13 73,2 2,88 63,5 2,50 1.1/4”63,5 4,41 2,50 67,5 2,66 54 2,13 3,29 1.1/2”79,4 3,13 73 2,87 63,5 2,50 2” 82 3,23 79,4 3,13 32 1.1/2” 82,3 3,24 63,5 2,50 32 2” 83,5 3,29 79,4 3,13 24 83,5 1.1/2”79,4 [mm] C 36 16 1/2" L A AY10I-10-08 AY10I-10-12 INCH A 162 - © Intertraco (Italia) S.p.A. All rights are reserved i INTERLOCK FITTINGS FOR 4 AND 6 SPIRAL HOSES RACCORDI INTERLOCK PER TUBI A 4 E 6 SPIRALI INTERLOCK-ARMATUREN FÜR 4 UND 6 SPIRALSCHLÄUCHE RACORES INTERLOCK PARA MANGUERA 4 Y 6 ESPIRALES SAE 6000 CODE 62 Ay10i-l SAE 6000 CODE 62 STRAIGHT FLANGE (LONG REACH VERSION) A L FLANGIA DIRITTA SAE 6000 psi (VERSIONE LUNGA) C SFS gerade (Lange Version) BRIDA RECTA SAE 6000 PSI (CODO LARGO) SAE 6000 CODE 62 STRAIGHT FLANGE (LONG REACH VERSION) Ø HOSE AY10I-L CODE CODICE BEST.-NR CODICE CODIGO AY10I-20-20-90 Ø TUBO Ø SCHLAUCH HOSE BORE FLANGE A Ø MANGUERA FLANGE DN INCH SIZE DN 1.1/4"INCH20 SIZE1.1/4" 31 [mm] 95,2 AY10I-20-20-90 38 31 1.1/2" 1.1/4” 24 AY10I-24-24-100 AY10I-24-24-100 51 38 2" 1.1/2” 32 AY10I-32-32-120 20 1.1/2" 1.1/4” 105,5 24 1.1/2” 127 AY10I-32-32-120 32 51 2” 2" 2” A C [in] [mm] [mm]54 3,75 4,1595,2 63,5 5,00105,5 79,4 127 C L [in] [in] 2,13 [mm] 90 [in] [mm] 3,54 3,75 100 54 2,50 3,94 4,15 120 63,5 3,13 4,72 5,00 79,4 L [in] [mm] [in] 2,13 90 3,54 2,50 100 3,94 3,13 120 4,72 © Intertraco (Italia) S.p.A. All rights are reserved - 163 i INTERLOCK FITTINGS FOR 4 AND 6 SPIRAL HOSES RACCORDI INTERLOCK PER TUBI A 4 E 6 SPIRALI INTERLOCK-ARMATUREN FÜR 4 UND 6 SPIRALSCHLÄUCHE RACORES INTERLOCK PARA MANGUERA 4 Y 6 ESPIRALES SAE 6000 CODE 62 Ay30i SAE 6000 CODE 62 - 30° ELBOW FLANGE A FLANGIA 30° SAE 6000 SFS 30° Bogenarmatur C D BRIDA A 30° SAE 6000 PSI CODE CODICE AY30I BEST.-NR CODIGO Ø HOSE Ø TUBO SAE 6000 Ø SCHLAUCH Ø MANGUERA A C CODE FLANGE 62 - 30° ELBOW FLANGE DN INCH SIZE CODICE AY30I-16-20 25 DN 1” INCH 16 SIZE FLANGE 1.1/4” AY30I-16-20 25 1" 16 1.1/4" HOSE BORE [mm] 92,5 A [in] 3,64 [mm] [in] [mm] 92,5 3,64 54 164 - © Intertraco (Italia) S.p.A. All rights are reserved [mm] [in] 54 2,13 C D D [mm] [in] 25 0,98 [in] [mm] [in] 2,13 25 0,98 i INTERLOCK FITTINGS FOR 4 AND 6 SPIRAL HOSES RACCORDI INTERLOCK PER TUBI A 4 E 6 SPIRALI INTERLOCK-ARMATUREN FÜR 4 UND 6 SPIRALSCHLÄUCHE RACORES INTERLOCK PARA MANGUERA 4 Y 6 ESPIRALES SAE 6000 CODE 62 Ay40i SAE 6000 CODE 62 - 45° ELBOW FLANGE A FLANGIA 45° SAE 6000 SFS 45° Bogenarmatur C D BRIDA A 45° SAE 6000 PSI CODE CODICE BEST.-NR AY40I CODIGO Ø HOSE Ø TUBO Ø SCHLAUCH FLANGE SAE 6000 CODE Ø MANGUERA DN INCH SIZE AY40I-10-12 16HOSE 5/8”BORE 10 AY40I-12-12 19DN INCH 12 SIZE 3/4” AY40I-12-16 AY40I-10-12 1916 3/4” 5/8" 1210 AY40I-16-12 AY40I-12-12 2519 1” 3/4" AY40I-16-16 AY40I-12-16 2519 AY40I-16-20 AY40I-16-12 2525 A C D 62 - 45° ELBOW FLANGE [mm] A [in] [mm] [in] 2,64 C41,3 1,63 D [mm] [in] 29 1,14 3/4” 67 3/4” [mm] 69 [in]2,72 [mm] 41,3 [in] [mm] 1,63 [in]29,5 1,16 1” 3/4" 73,3 67 2,642,89 41,3 47,6 1,63 1,87 24,4 0,96 34 1,34 1612 3/4” 3/4" 78,9 68 2,683,11 41,3 41,3 1,63 1,63 30 1,1831,8 1,25 1” 3/4" 1612 1”1" 79 73,3 2,893,11 47,6 47,6 1,87 1,87 34 1,34 31 1,22 1”1" 1616 1.1/4” 3/4" 92 79 3,113,62 41,3 54 1,63 2,13 31,8 1,25 39 1,54 AY40I-20-16 AY40I-16-16 3125 1.1/4” 1" 2016 1”1" 110,4 79 3,114,35 47,6 47,6 1,87 1,87 31 1,2238,1 1,50 AY40I-20-20 AY40I-16-20 3125 1.1/4” 1" 2016 1.1/4” 1.1/4" 111,7 92 3,624,40 54 54 2,13 2,13 39 1,5443,5 1,71 AY40I-20-24 AY40I-20-16 3131 1.1/4” 1.1/4" 2020 1.1/2” 1" 112,7 110,4 4,354,44 47,6 63,5 1,87 2,50 38,1 1,50 48 1,89 AY40I-24-20 AY40I-20-20 3831 1.1/2” 1.1/4" 2420 1.1/4” 1.1/4" 136,5 111 4,375,37 54 54 2,13 2,13 43,5 1,71 50 1,97 AY40I-24-24 AY40I-20-24 3831 1.1/2” 1.1/4" 2420 1.1/2” 1.1/2" 122,8 112 4,414,83 63,5 63,5 2,50 2,50 48 1,8946,4 1,83 AY40I-24-32 AY40I-24-20 3838 1.1/2” 1.1/2" 2424 5138 2” 3224 1.1/2" 2” 1.1/4" 2” 1.1/2" 131,3 131 164,6 122 5,165,17 54 79,4 2,13 6,48 79,4 4,80 63,5 2,50 3,13 50 3,13 47 1,97 58 1,85 60 2,28 CODICE AY40I-32-32 AY40I-24-24 FLANGE AY40I-24-32 38 1.1/2" 24 2" 133,5 5,26 79,4 3,13 57 2,24 AY40I-32-32 51 2" 32 2" 164,6 6,48 79,4 3,13 60 2,36 AY40I-L CODICE 2,36 SAE 6000 CODE 62 - 45° ELBOW FLANGE (LONG DROP) HOSE BORE FLANGE DN INCH SIZE AY40I-16-16-50 25 1" 16 1" AY40I-16-16-80 25 1" 16 1" A C D [mm] [in] [mm] [in] [mm] [in] 99 3,90 47,6 1,87 50 1,97 122 4,80 47,6 1,87 80 3,15 © Intertraco (Italia) S.p.A. All rights are reserved - 165 i INTERLOCK FITTINGS FOR 4 AND 6 SPIRAL HOSES RACCORDI INTERLOCK PER TUBI A 4 E 6 SPIRALI INTERLOCK-ARMATUREN FÜR 4 UND 6 SPIRALSCHLÄUCHE RACORES INTERLOCK PARA MANGUERA 4 Y 6 ESPIRALES SAE 6000 CODE 62 Ay40i-l SAE 6000 CODE 62 - 45° ELBOW FLANGE (LONG DROP) A D FLANGIA 45° SAE 6000 (VERSIONE ALTA) SFS 45° Bogenarmatur Sonder-SL C BRIDA A 45° SAE 6000 PSI ( CODO LARGO ) Ø HOSE SAE Ø TUBO6000 CODE 62 - 45° ELBOW FLANGE (LONG DROP) AY40I-L CODE CODICE BEST.-NR CODIGO CODICE AY40I-12-12-90 AY40I-16-16-50 AY40I-12-16-90 AY40I-16-16-80 AY40I-16-16-50 Ø SCHLAUCH Ø MANGUERA A FLANGE HOSE BORE DN DN 19 25 19 25 INCH SIZE FLANGE INCH SIZE 3/4” 12 1" 16 1" 16 3/4” 12 1" 1" 3/4” 1” A [mm] 99 122 [mm] C C [in] [in] [mm] [in] 3,90 47,6 1,87 4,80 47,6 1,87 129,2 128,2 5,09 5,05 [mm] D [in] [mm] [in] 1,63 90 3,54 1,87 90 3,54 [mm] [in] 50 1,97 80 3,15 41,3 47,6 D 25 1” 16 1” 98 3,86 47,6 1,87 50 1,97 AY40I-16-16-80 25 1” 16 1” 119 4,69 47,6 1,87 80 3,15 AY40I-16-16-100 25 1” 16 1” 149,3 5,88 47,6 1,87 100 3,94 AY40I-16-20-105 25 1” 16 1.1/4” 155,3 6,11 54 2,13 105 4,13 AY40I-20-20-130 31 1.1/4” 20 1.1/4” 195 7,68 54 2,13 130 5,12 166 - © Intertraco (Italia) S.p.A. All rights are reserved i INTERLOCK FITTINGS FOR 4 AND 6 SPIRAL HOSES RACCORDI INTERLOCK PER TUBI A 4 E 6 SPIRALI INTERLOCK-ARMATUREN FÜR 4 UND 6 SPIRALSCHLÄUCHE RACORES INTERLOCK PARA MANGUERA 4 Y 6 ESPIRALES SAE 6000 CODE 62 Ay60i SAE 6000 CODE 62 - 60° ELBOW FLANGE A FLANGIA 60° SAE 6000 SFS 60° Bogenarmatur D BRIDA A 60° SAE 6000 PSI C CODE AY60I CODICE BEST.-NR CODIGO CODICE Ø HOSE Ø TUBO6000 SAE Ø SCHLAUCH Ø MANGUERA CODE 62 - 60° ELBOW FLANGE A FLANGE HOSEINCH BORESIZE DN FLANGE A[mm] AY60I-20-20 AY60I-20-20 AY60I-24-24 DN 31 INCH 1.1/4” SIZE 20 31 38 1.1/4" 1.1/2” 2024 1.1/4" 1.1/2” 108 4,25 136 AY60I-24-24 38 1.1/2" 1.1/2" 136 5,35 24 [in] 1.1/4” [mm] 108,2 C [in] [mm] D [mm] 4,26 [in] 545,35 2,13 63,5 C 2,50 [mm] 54 55 63,5 68 D [mm] [in] [in]2,13 [in] 55 2,17 2,17 2,50 67,9 2,67 2,68 © Intertraco (Italia) S.p.A. All rights are reserved - 167 i INTERLOCK FITTINGS FOR 4 AND 6 SPIRAL HOSES RACCORDI INTERLOCK PER TUBI A 4 E 6 SPIRALI INTERLOCK-ARMATUREN FÜR 4 UND 6 SPIRALSCHLÄUCHE RACORES INTERLOCK PARA MANGUERA 4 Y 6 ESPIRALES SAE 6000 CODE 62 AY90I SAE 6000 CODE 62 - 90° ELBOW FLANGE A D FLANGIA 90° SAE 6000 SFS 90° Bogenarmatur BRIDA A 90° SAE 6000 PSI C AY90I CODE Ø HOSE SAE 6000 CODE 62 - 90° ELBOW FLANGE Ø TUBO Ø SCHLAUCH FLANGE Ø MANGUERA HOSE BORE A FLANGE [mm] DN INCH INCHSIZESIZE DN [in] AY90I-10-12 AY90I-10-12 1616 5/8"5/8” 10 10 3/4" 3/4”51,5 AY90I-12-12 AY90I-12-12 1919 3/4"3/4” 12 12 3/4" 3/4”60 AY90I-12-16 19 3/4" 12 1" AY90I-16-12 25 1" 16 AY90I-16-16 25 1" CODICE BEST.-NR CODIGO CODICE AY90I-12-16 AY90I-16-12 AY90I-16-16 AY90I-16-20 19 25 2525 3/4” 1” 16 AY90I-20-16 AY90I-16-24 3125 1.1/4"1” 20 AY90I-20-20 AY90I-20-16 31 1.1/4" 20 AY90I-20-24 31 1.1/4" 20 AY90I-24-20 38 1.1/2" 24 AY90I-24-24 38 1.1/2" 24 AY90I-20-24 31 31 3/4" 1" 1” 3/4” 1.1/4” 16 1" 20 1.1/4" 1.1/4” 20 1.1/4” 20 1.1/2" 1.1/4" 1.1/2" [in] [mm] [in] 1,63 2,03 2,28 41,3 1,63 58 2,28 2,36 6041,3 2,28 47,6 1,63 2,38 2,36 60,5 41,3 1,87 65 2,56 1,63 60,5 2,38 58 77 3,03 41,3 1,63 69 47,6 1,87 65 2,56 73 2,87 47,6 1,87 66 41,3 1,63 69 2,72 [mm] [mm] 58 77 3,03 2,72 2,60 2,87 2,13 80 47,6 3,15 1,87 66 2,60 2,99 7663,5 2,99 2,50 89 54 3,50 2,13 80 3,15 3,82 7647,6 1,87 2,99 87 3,43 63,5 2,50 89 3,50 97 3,82 54 2,13 86 3,39 1,87 85 3,35 99,5 3,92 63,5 2,50 97 112 4,41 54 2,13 92 54 2,13 86 3,39 108,5 4,27 63,5 2,50 104 63,5 2,50 100 3,94 1” 1.1/4” 1.1/2” 1.1/4” 115,5 91,7 97,2 99,9 1.1/2”24 3838 1.1/2" 24 AY90I-24-24 AY90I-32-24 5138 2"1.1/2”32 24 1.1/2" 1.1/2” 127 AY90I-32-32 AY90I-24-32 5138 2"1.1/2”32 24 AY90I-32-24 51 2” 32 1.1/2” 117 AY90I-32-32 51 2” 32 2” 145 2" 2,28 58 2,99 73 54 AY90I-24-20 AY90I-24-32 2" D 2,03 51,5 41,3 1.1/2”97 C C D [in] [in] [in] [mm] [mm] 16 1.1/4" 1” 76 1" 1” 16 16 1.1/2" 1.1/4”76 2525 AY90I-20-20 16 1" 1” 16 AY90I-16-20 AY90I-16-24 31 12 A 2” 145 3,61 3,83 3,93 47,6 3,82 3,62 4,09 4,55116,5 79,4 4,59 119,5 3,13 54 4,70 2,13 113 4,45 5,00108,5 63,5 4,27 109 2,50 63,5 4,29 2,50 104 4,09 5,71107,5 79,4 3,13 4,23 134 5,28 79,4 3,13 119 4,69 4,61 63,5 2,50 104 4,09 5,71 79,4 3,13 134 5,28 168 - © Intertraco (Italia) S.p.A. All rights are reserved i INTERLOCK FITTINGS FOR 4 AND 6 SPIRAL HOSES RACCORDI INTERLOCK PER TUBI A 4 E 6 SPIRALI INTERLOCK-ARMATUREN FÜR 4 UND 6 SPIRALSCHLÄUCHE RACORES INTERLOCK PARA MANGUERA 4 Y 6 ESPIRALES SAE 6000 CODE 62 AY90I-L SAE 6000 CODE 62 - 90° ELBOW FLANGE (LONG DROP) A FLANGIA 90° SAE 6000 (VERsione alta) D SFS 90° Bogenarmatur Sonder-SL BRIDA A 90° SAE 6000 PSI (CODO LARGO) C Ø HOSE SAE 6000 CODE 62 - 90° ELBOW FLANGE (LONG DROP) Ø TUBO AY90I-L CODE CODICE BEST.-NR CODIGO CODICE A Ø SCHLAUCH FLANGE Ø MANGUERA HOSE BORE A FLANGE INCHSIZE SIZE [mm] DNDN INCH [in] [mm] [mm] 1919 C C D [in] [mm] [mm] [in] [in] D [in] [mm] [in] 3/4"3/4” 12 12 3/4" 3/4”63 2,48 62,5 41,3 2,46 1,63 80 41,3 3,15 1,63 80 3,15 1919 3/4"3/4” 12 AY90I-12-12-150 AY90I-12-12-100 12 3/4" 3/4”60 2,36 6341,3 1,63 2,48 150 5,91 41,3 1,63 100 3,94 1" 60 2,36 47,6 1,87 80 1,63 150 5,91 79 3,11 41,3 1,63 108 69 2,72 47,6 1,87 70 47,6 1,87 80 3,15 72 2,83 47,6 1,87 80 47,6 1,87 100 3,94 AY90I-12-12-80 AY90I-12-12-80 AY90I-12-16-80 19 3/4" 12 AY90I-16-12-108 25 1" 16 AY90I-16-16-70 25 1" AY90I-16-16-80 25 1" AY90I-12-12-150 AY90I-12-16-80 AY90I-12-16-100 19 19 19 AY90I-16-12-108 2525 AY90I-16-16-100 3/4” 3/4” 3/4” 16 16 12 12 12 3/4" 1" 1" 3/4” 1” 1” 60 60 60 2,36 2,36 2,36 3,15 41,3 4,25 2,76 3,15 1" 1” 16 16 1" 3/4”75 2,95 7947,6 3,11 100 1,87 41,3 3,94 1,63 108 4,25 AY90I-16-16-120 AY90I-16-16-70 2525 1" 1” 16 16 1" 1” 75 2,95 6947,6 1,87 2,72 120 4,72 47,6 1,87 70 2,76 AY90I-16-16-130 AY90I-16-16-80 2525 1" 1” 16 16 1" 1” 77 5,12 47,6 1,87 80 3,15 AY90I-16-16-150 25 1" AY90I-16-20-100 25 1" 47,6 1,87 100 3,94 AY90I-20-16-150 31 1.1/4" 47,6 1,87 120 4,72 1,87 130 5,12 1,87 150 5,91 2,13 100 3,94 AY90I-16-16-100 AY90I-16-16-120 25 25 1” 1” 16 16 20 16 16 1" 1.1/4" 1" AY90I-16-16-130 25 1.1/4"1” 20 31 AY90I-20-20-100 AY90I-16-16-150 3125 1.1/4"1” 20 AY90I-20-20-150 16 1.1/4" 16 1.1/4" 5125 AY90I-32-32-145 AY90I-16-20-100 2" 1” 32 16 2" 1” 1” 3,03 7247,6 1,87 2,83 130 66,5 2,62 47,6 1,87 150 76 2,99 54 2,13 100 98,7 3,89 47,6 1,87 150 75 75 2,95 3,94 5,91 1”97,7 3,85 1”99,4 3,91 66,554 3,03 100 47,6 3,94 2,62 47,6 2,13 150 5,91 5,83 7679,4 3,13 2,99 145 148 1.1/4” 77 54 2,95 5,91 2,13 5,71 54 AY90I-20-16-150 31 1.1/4” 20 1” 98,7 3,89 47,6 1,87 150 5,91 AY90I-20-20-100 31 1.1/4” 20 1.1/4” 97,7 3,85 54 2,13 100 3,94 AY90I-20-20-120 31 1.1/4” 20 1.1/4” 97,7 3,85 54 2,13 120 4,75 AY90I-20-20-150 31 1.1/4” 20 1.1/4” 97,7 3,85 54 2,13 150 5,91 AY90I-24-20-86 38 1.1/2” 24 1.1/4” 103,5 4,07 54 2,13 86 3,39 AY90I-24-24-140 38 1.1/2” 24 1.1/2” 108 4,25 63,5 2,50 140 5,51 AY90I-32-32-145 51 2” 32 2” 145 5,71 79,4 3,13 145 5,71 © Intertraco (Italia) S.p.A. All rights are reserved - 169 i INTERLOCK FITTINGS FOR 4 AND 6 SPIRAL HOSES RACCORDI INTERLOCK PER TUBI A 4 E 6 SPIRALI INTERLOCK-ARMATUREN FÜR 4 UND 6 SPIRALSCHLÄUCHE RACORES INTERLOCK PARA MANGUERA 4 Y 6 ESPIRALES SUPERCAT STYLE HIGH PRESSURE FLANGE SUPERCAT STYLE STRAIGHT FLANGE A FLANGIA DIRITTA stile SUPERCAT SAE Flansch SuperCat-Typ 6000 PSI BRIDA RECTA ESTILO SUPERCAT C E SUPERCAT STYLE STRAIGHT FLANGE Ø HOSE AY1CI CODE CODICE BEST.-NR CODICE CODIGO DN INCH SIZE AY1CI-12-12 19 3/4" 12 3/4" 12 AY1CI-12-12 AY1CI Ø TUBO Ø SCHLAUCH HOSE BORE FLANGE A Ø MANGUERA FLANGE DN 19 INCH SIZE 3/4” 12 3/4" A C [mm] [in] 47 1,85 61,5 2,42 3/4” [mm] [in] [mm] 41,3 1,63 14,5 47,6 1,87 14,5 [mm] 46,8 C E [in] [in] E [mm] [in] [mm] [in] 41,3 1,63 14,5 0,57 2,42 14,5 47,6 1,87 0,57 1,87 14,5 0,57 1,84 0,57 AY1CI-12-16 19 AY1CI-12-16 AY1CI-16-16 2519 1" 3/4” 16 12 AY1CI-16-20 AY1CI-16-16 2525 1" 1” 16 16 1.1/4" 1”68,7 2,70 62,5 54 2,13 0,57 2,46 14,5 47,6 1,87 14,5 0,57 AY1CI-20-20 AY1CI-16-20 3125 1.1/4" 1” 20 16 1.1/4" 71,4 1.1/4” 2,81 68,7 54 2,13 2,70 14,5 2,13 14,5 0,57 AY1CI-20-24 31 1.1/4" 20 1.1/2" 75,2 2,96 63,5 2,50 14,5 AY1CI-24-24 38 1.1/2" 24 75 2,95 63,5 2,50 14,5 54 2,13 14,5 0,57 63,5 2,50 14,5 0,57 63,5 2,50 14,5 0,57 AY1CI-20-20 AY1CI-20-24 AY1CI-24-24 31 31 38 1.1/4" 20 1.1/4" 20 1.1/2" 24 1" 1" 1.1/2" 1”62,5 1.1/4" 1.1/2" 2,46 61,5 47,6 71,4 75,2 1.1/2" 170 - © Intertraco (Italia) S.p.A. All rights are reserved 75 2,81 2,96 2,95 0,57 0,57 54 0,57 0,57 i INTERLOCK FITTINGS FOR 4 AND 6 SPIRAL HOSES RACCORDI INTERLOCK PER TUBI A 4 E 6 SPIRALI INTERLOCK-ARMATUREN FÜR 4 UND 6 SPIRALSCHLÄUCHE RACORES INTERLOCK PARA MANGUERA 4 Y 6 ESPIRALES AY2CI SUPERCAT STYLE HIGH PRESSURE FLANGE A SUPERCAT STYLE - 22,5° ELBOW FLANGE E FLANGIA 22,5° stile SUPERCAT C D SAE Flansch SuperCat-Typ 22,5° 6000 PSI BRIDA A 22,5° ESTILO SUPERCAT CODE AY2CI CODICE BEST.-NR CODIGO CODICE Ø HOSE ØSUPERCAT TUBO STYLE -A22,5° Ø SCHLAUCH FLANGE Ø MANGUERA DNHOSE INCHBORE SIZE [mm] FLANGE [in] A [in] C [mm] [mm] AY2CI-16-16 25 DN 1” INCH 16 SIZE AY2CI-16-20 AY2CI-16-16 25 25 1” 1" 16 16 1.1/4”1" AY2CI-20-20 AY2CI-16-20 31 25 1.1/4” 1" 20 16 1.1/4” 1.1/4" 129,7 1035,11 4,06 54 54 2,132,13 21 21 AY2CI-20-20 31 1.1/4" 20 1” ELBOW FLANGE C D 1.1/4" E D[in] 86 [mm] 3,39 [in] 47,6[mm]1,87 [in] 15,5 [mm] 0,61 [in] 103 [mm] E[in] 14,5 [mm] 0,57 [in] 934,06 3,66 54 47,6 2,131,87 2119,5 0,83 0,77 14,5 14,5 0,57 0,57 129,7 5,11 54 2,13 21 0,83 0,83 14,5 14,5 0,83 14,5 0,57 0,57 0,57 © Intertraco (Italia) S.p.A. All rights are reserved - 171 i INTERLOCK FITTINGS FOR 4 AND 6 SPIRAL HOSES RACCORDI INTERLOCK PER TUBI A 4 E 6 SPIRALI INTERLOCK-ARMATUREN FÜR 4 UND 6 SPIRALSCHLÄUCHE RACORES INTERLOCK PARA MANGUERA 4 Y 6 ESPIRALES AY3CI SUPERCAT STYLE HIGH PRESSURE FLANGE A SUPERCAT STYLE - 30° ELBOW FLANGE E D FLANGIA 30° stile SUPERCAT SAE Flansch SuperCat-Typ 30° 6000 PSI C BRIDA A 30° estilo supercat CODE CODICE AY3CI BEST.-NR CODIGO Ø HOSE Ø TUBO SUPERCAT STYLE -A30° Ø SCHLAUCH FLANGE Ø MANGUERA C FLANGED ELBOW DN INCH SIZE [mm] [in] [mm] [in] [mm] CODICE AY3CI-12-12 19 3/4” 3,16 41,3 1,63 21,5 AY3CI-20-24 19 19 25 19 25 25 31 25 31 31 38 31 3/4” 3/4" 1” 3/4" 1” 1" 1.1/4” 1" 1.1/4” 1.1/4" 1.1/2” 1.1/4" SIZE FLANGE 3/4” 80,2 AY3CI-12-16 INCH 12 12 12 16 12 16 16 20 16 20 20 24 20 1” 3/4" 1” 1" 1.1/4” 1" 1.1/4” 1.1/4" 1.1/2” 1.1/4" 1.1/2” 1.1/2" AY3CI-24-24 38 1.1/2" 24 1.1/2" AY3CI-12-12 AY3CI-16-16 AY3CI-12-16 AY3CI-16-20 AY3CI-16-16 AY3CI-20-20 AY3CI-16-20 AY3CI-20-24 AY3CI-20-20 AY3CI-24-24 HOSE BORE DN 85 A [mm] 3,35 79 84,5 3,33 83 95 3,74 85,5 123,8 4,87 99,5 124,7 4,91 119 133 5,24 124,7 133 172 - © Intertraco (Italia) S.p.A. All rights are reserved [in] C [mm] [in] 63,5 2,50 47,6 1,87 3,11 41,3 1,63 47,6 1,87 3,27 47,6 1,87 54 2,13 3,37 47,6 1,87 54 2,13 3,92 54 2,13 63,5 2,50 4,69 54 2,13 63,5 2,50 4,91 63,5 2,50 5,24 E [in] [mm] 0,85 14,5 24,3 22 21 26 26 21 29,4 29 30 30,5 29,5 30 0,96 0,87 0,83 1,02 1,02 0,83 1,16 1,14 1,18 1,20 1,16 1,18 14,5 14,5 14,5 14,5 14,5 14,5 14,5 14,5 14,5 14,5 14,5 14,5 0,57 0,57 0,57 0,57 0,57 0,57 0,57 0,57 0,57 0,57 0,57 0,57 29,5 1,16 14,5 0,57 [mm] D [in] [mm] [in] E 0,57 [in] i INTERLOCK FITTINGS FOR 4 AND 6 SPIRAL HOSES RACCORDI INTERLOCK PER TUBI A 4 E 6 SPIRALI INTERLOCK-ARMATUREN FÜR 4 UND 6 SPIRALSCHLÄUCHE RACORES INTERLOCK PARA MANGUERA 4 Y 6 ESPIRALES AY4CI SUPERCAT STYLE HIGH PRESSURE FLANGE SUPERCAT STYLE - 45° ELBOW FLANGE A D E FLANGIA 45° stile SUPERCAT SAE Flansch SuperCat-Typ 45° 6000 PSI C BRIDA A 45° estilo supercat CODE CODICE AY4CI BEST.-NR CODIGO Ø HOSE Ø TUBO A Ø SCHLAUCH FLANGE SUPERCAT STYLE 45° Ø MANGUERA DN INCH SIZE [mm] [in] D E [mm] [in] [in] [in] AY4CI-12-16 DN 19 INCH 3/4" AY4CI-12-12 AY4CI-16-16 19 25 3/4" 1" 1612 1" 3/4" AY4CI-12-16 AY4CI-16-20 19 25 3/4" 1" 1612 1.1/4"1" AY4CI-16-16 AY4CI-20-20 25 31 1" 1.1/4” 2016 1.1/4”1" AY4CI-16-20 AY4CI-24-24 25 38 1" 1.1/2” 2416 1.1/4" 123 1.1/2” AY4CI-20-20 31 1.1/4" 20 1.1/4" 113,7 4,48 54 2,13 45 1,77 14,5 0,57 AY4CI-24-24 38 1.1/2" 24 1.1/2" 123 4,84 63,5 2,50 48 1,89 14,5 0,57 CODICE SIZE 12 1" 77 FLANGE 41,3 32 D 1,26 [mm] 19HOSE 3/4“BORE 12 72 C 1,63 [mm] AY4CI-12-12 3/4“ A 2,83 C ELBOW FLANGE [mm] [mm] 1,48[in] 3,03 [in]47,6 [mm]1,87 [in] 37,5 14,5 E0,57 [mm] 0,57 [in] 14,5 82,5 723,25 2,8347,6 41,31,871,63 34,5 32 1,36 1,26 14,5 14,5 0,57 0,57 93 773,66 3,03 54 47,62,131,87 41 37,5 1,61 1,48 14,5 14,5 0,57 0,57 1,36 14,5 14,5 113,7 82,5 4,48 3,25 54 47,62,131,87 45 34,5 1,77 0,57 0,57 894,84 3,5063,5 54 2,502,13 48 41 1,89 1,61 14,5 14,5 0,57 0,57 © Intertraco (Italia) S.p.A. All rights are reserved - 173 i INTERLOCK FITTINGS FOR 4 AND 6 SPIRAL HOSES RACCORDI INTERLOCK PER TUBI A 4 E 6 SPIRALI INTERLOCK-ARMATUREN FÜR 4 UND 6 SPIRALSCHLÄUCHE RACORES INTERLOCK PARA MANGUERA 4 Y 6 ESPIRALES AY6CI SUPERCAT STYLE HIGH PRESSURE FLANGE SUPERCAT STYLE - 60° ELBOW FLANGE A E D FLANGIA 60° stile SUPERCAT SAE Flansch SuperCat-Typ 60° 6000 PSI BRIDA A 60° ESTILO SUPERCAT C CODE CODICE BEST.-NR AY6CI CODIGO Ø HOSE Ø TUBO A Ø SCHLAUCH FLANGE SUPERCAT STYLE - 60° Ø MANGUERA DN INCH SIZE AY6CI-12-12 19HOSE 3/4”BORE 12 AY6CI-12-16 19 DN 3/4” INCH 12 SIZE AY6CI-16-16 AY6CI-12-12 25 19 1” 3/4" AY6CI-16-20 AY6CI-12-16 25 19 AY6CI-20-20 AY6CI-16-20 CODICE 3/4” C D E ELBOW FLANGE [mm] [in] [mm] [in] [mm] [in] [mm] [in] 72 2,83 A 41,3 1,63 C 45,6 1,80 D 14,5 E0,57 FLANGE 1” 72,7 [mm] 2,86 [in] 47,6[mm]1,87 [in] 48,9 [mm] 1,93 [in] 14,5 [mm] 0,57 [in] 16 12 1”3/4" 85,5 813,37 3,1947,6 41,3 1,871,63 47,850 1,88 1,97 14,5 14,5 0,57 0,57 1” 3/4" 16 12 1.1/4”1" 98,2 853,87 3,35 54 47,6 2,131,87 57,951 2,28 2,01 14,5 14,5 0,57 0,57 31 25 1.1/4” 1" 20 16 1.1/4” 4,91 4,35 54 54 2,132,13 64,5 1.1/4" 124,7110,5 59,5 2,54 2,34 14,5 14,5 0,57 0,57 AY6CI-20-24 AY6CI-20-20 31 31 1.1/4” 1.1/4" 20 20 1.1/2” 4,84 4,9163,5 54 2,502,13 65,561 1.1/4" 123 124,7 2,58 2,40 14,5 14,5 0,57 0,57 AY6CI-24-24 AY6CI-20-24 38 31 1.1/2” 1.1/4" 24 20 1.1/2” 1.1/2" 136 132,3 5,35 5,2163,5 63,5 2,502,50 69,665,5 2,74 2,58 14,5 14,5 0,57 0,57 AY6CI-24-24 38 1.1/2" 24 1.1/2" 154,5 174 - © Intertraco (Italia) S.p.A. All rights are reserved 6,08 63,5 2,50 65 2,56 14,5 0,57 i INTERLOCK FITTINGS FOR 4 AND 6 SPIRAL HOSES RACCORDI INTERLOCK PER TUBI A 4 E 6 SPIRALI INTERLOCK-ARMATUREN FÜR 4 UND 6 SPIRALSCHLÄUCHE RACORES INTERLOCK PARA MANGUERA 4 Y 6 ESPIRALES AY9CI SUPERCAT STYLE HIGH PRESSURE FLANGE SUPERCAT STYLE - 90° ELBOW FLANGE A BRIDA A 90° ESTILO SUPERCAT D E FLANGIA 90° stile SUPERCAT SAE Flansch SuperCat-Typ 90° 6000 PSI C CODE CODICE BEST.-NR AY9CI CODIGO AY9CI-12-12 CODICE AY9CI-12-16 Ø HOSE Ø TUBO A Ø SCHLAUCH FLANGE Ø MANGUERA SUPERCAT STYLE - 90° DN INCH SIZE 19 3/4” 12 19 3/4” 12 FLANGE 1” 58 16 12 16 12 20 16 20 16 24 20 1” 73 3/4" 1.1/4” 76 1" 1.1/4” 97,2 1" 1.1/2” 99,9 1.1/4" 1.1/2” 108,5 1.1/4" HOSE BORE [mm] [in] [mm] [in] [mm] [in] 60 2,36 41,3 1,63 66,5 2,62 14,5 0,57 2,28 47,6 1,87 70 2,76 14,5 2,80 2,62 3,31 2,76 3,54 2,80 3,90 3,31 4,17 3,54 14,5 14,5 14,5 14,5 14,5 14,5 14,5 14,5 14,5 14,5 0,57 0,57 0,57 0,57 0,57 0,57 0,57 0,57 0,57 0,57 A AY9CI-20-20 25 19 25 19 31 25 31 25 38 31 1” 3/4" 1” 3/4" 1.1/4” 1" 1.1/4” 1" 1.1/2” 1.1/4" AY9CI-20-24 31 1.1/4" 20 1.1/2" 99,9 AY9CI-24-24 38 1.1/2" 24 1.1/2" 108,5 AY9CI-12-12 AY9CI-12-16 AY9CI-20-20 AY9CI-16-16 AY9CI-20-24 AY9CI-16-20 AY9CI-24-24 ELBOW FLANGE E [in] SIZE AY9CI-16-20 D [mm] INCH AY9CI-16-16 DN 3/4” C [mm] 2,87 60 2,99 58 3,83 73 3,93 76 4,27 97 [in] C [mm] 0,57 [in] 3,93 63,5 2,50 99 3,90 14,5 0,57 4,27 63,5 2,50 106 4,17 14,5 0,57 71 66,5 84,2 70 90 71 99 84 106 90 [in] E [mm] 47,6 1,87 2,36 41,3 1,63 54 2,13 2,28 47,6 1,87 54 2,13 2,87 47,6 1,87 63,5 2,50 2,99 54 2,13 63,5 2,50 3,82 54 2,13 [mm] D [in] © Intertraco (Italia) S.p.A. All rights are reserved - 175 176 - © Intertraco (Italia) S.p.A. All rights are reserved HOSE FITTINGS Intertraco (Italia) S.p.A. Via E. Amaldi, 1/A-B I-46029 SUZZARA (MN)-ITALY P.O. Box N°7/C Tel. +39 0376 539 711 Fax +39 0376 521 722 e-mail info@intertraco.it www.intertraco.it HOSE FITTINGS 2P009 2P009