Subido por Irina Saenz

BombaInfusion

Anuncio
www.daiwha.com
www.daiwha.com
DAIWHA Infusion Pump
medifusion@mpMQPPP
Infusion Pump
SPECIFICATION
p’„•ƒ”@n
Volumetric Infusion Pump
m„ Œ
MEDIFUSION
p•‰Ž‡@s™“” 
PERISTALTIC SEMI-TRANSIT FINGER
fŒ—@r” @rŽ‡
0.1 to 99.9ml/h (in 0.1ml/h increments)
MEDIFUSION MP-1000
MP-1000
High Performance & Easy Operation
100ml/h to 999ml/h (in 1m/h increments)
aƒƒ•’ƒ™
5 % with assigned IV set
vŒ• @d Œ‰– ’ „
0.1 to 9,999 ml
p•’‡ @fŒ—@r”
700 ml/h (or selectable)
vŒ• @l‰‰”@rŽ‡
0.1 to 9,999 ml
aŒ’“@F@iŽ„‰ƒ”’“
Air in line
Infusion complete
Occlusion
(Up/Down)
Empty container
Low battery
Door open
Other device malfunctions
f•Žƒ”‰Ž
Keep-Vein -Open
Drop sensor (Controls drip rate of IV sets and detect
irregularities in drop count)
Tubing Clamp Mechanism
Broad Range of Delivery rate settings
Volume Memorize Function
Selectable One Shot Purge
Easy replacement of
Battery & convenent Battery indicator
Free drop protection Finger
User Selectable setup (IV set, sound, occlusion,
etc)
p— ’@r ‘•‰’  Ž”
AC 100 to 240V, 50/60hz, External 12V DC
p— ’@cŽ“•”‰Ž
Less than 30VA
cŒ““‰†‰ƒ”‰Ž
Class I, Type BF, IPX 1
b”” ’™@s•’ƒ
Rechargeable Nickel-Metal Hybride Battery can run
the pump continuously for about 3 hours at an operating
rate of 25ml/h
cŽ“”’•ƒ”‰Ž
Drip Proof
aƒƒ ““’‰ “
AC Power, Drop Sensor, IV Sets, Operation Guide
d‰ Ž“‰ŽHI
(D)166 X (W)258 X (H)125
w ‰‡ˆ”
Approx 3.2 Kg
Distributor:
Head Quarter ;
DAIWHA Bldg. 733-18, Yeoksam-Dong, Kangnam-Ku, Seoul, Korea
Phone : 82-2-558-1711〜6 / Fax : 82-2-554-0317
Home Page : http://www.daiwha.com / E-mail : daiwha@daiwha.com
Factory ;
177, Youngchun Ri, Dongtan Myun, Hwasung Si, Kyungki Do, Korea
Phone: 82-31-376-9383~6 / Fax: 82-31-376-9387
Printed in Korea 2003
infusion@pump
High Performance &
Easy Operation
www.daiwha.com
medifusion@mpMQPPP
●Drop sensor
Broad Range of
Flow Rate Settings
The flow rate can be set up to a maximum
of 999ml/h, and can be adjusted in 0.1ml/h
increments up to 99.9ml/h.
● Infused volume indicator
● Total volume indicator
Improved Drop Sensor
Safety Features
The drop sensor controls flow rate of IV
fluid, and detects irregularities in drop
count.
- A keep vein open (KVO) system that
prevents the blood access from closing
once the programmed infusion volume has
been delivered.
Convenient Battery Indicator
Battery Replacement is Easy
- A tube-clamping mechanism that
automatically stops infusion when the door
is inadvertently opened, and accidental
power cutoff prevention that allows the
pump to continue running even if the
ON/OFF key is mistakenly pressed during
infusion.
- The MP-1000 has a drip-proof
construction that protects it from infiltration
by water or IV solution, and it complies
with electromagnetic compatibility (EMC)
standards.
The batteries can be easily replaced
simply by opening the battery cover at the
bottom of the unit.
Application
● Alarm indicator
(Air, Occlusion, Door open,
Low battery, Infusion complete)
● Volume display
● Up occlusion sensor
● Interworking part lever
● Flow rate display
Compatible with Most IV Sets
● Purge indicator
● Stop indicator
● Infusion indicator
in progress
● Interworking part
● Mode key
The MP-1000 has a pre-programmed data
for all kinds of standard IV sets. The
operator can make it possible to use the
pump with any standard IV sets without
special trying and efforts.
A 3-Level indicator displays the charging
status and remaining capacity of the
internal battery, so that the operator
knows when to get spare batteries or
switch over to AC power.
● Purge key
● Selection key
● Start key
Memory Function
● Stop key
● Flow rate setting keys
● Down occlusion sensor
When the power is turned off, the unit
stores and retains the most recent
flow rate, total volume.
● ON/OFF key
● Air sensor
● Power source indicator
● Battery indicator
Variable Alarm Functions
- Air in line
- Occlusion
- Door open
- Low battery
- Infusion complete
- Empty container
- Other device malfunction
Clears EMC Standards
The pump conforms to international
standards for electromagnetic
compatibility (EMC), which require that
devices not be affected by
electromagnetic fields from external
sources and not emit electromagnetic
waves sufficient to affect the operation of
other electronic devices.
- Continuous low flow rate infusion of fluid
drug and transfusion in ICU or CCU
- Continuous infusion of anesthetic, anticancer agent and nutrient to immature
infant or newborn
Descargar