REMANIT 4404 DIN Equivalences: X 2 Cr Ni Mo 17 13 2 W.N.:1.4404 AISI: 316 L Chemical composition %C %Cr 16.50 18.50 ≤0.03 State of supply Hardness of supply Identification colors Format % Ni 11.00 14.00 %Mo 2.00 2.50 Annealed 200 HB max. Purple – Red (Letter L color white) Round bars and plates Properties Resistant to acids with lowering resistance effects with sulfuric acid and hydrochloric acid, it can cause pitting and stress corrosion. Good resistance to intercrystalline corrosion up to 400 º C and surface corrosion. For a best anticorrosive effect it is recommended to polish (mirror.effect) Easy machining and inlaying. Steel of greater weldability than Remanit 4401 due to its low carbon percentage. Applications In the pharmaceutical industry. Production of artificial textile fibers and obtain from carbon derivatives. For tanks, pipes, fittings in the chemical industry, such as paper and pulp mills. Photography industry, textile dry cleaners of high chemical demand. Medical and surgical instruments. Manufacturing of fruit juices, liqueurs and alcohol and where there should be no influence on taste. Mechanical Properties Range of dimensions Elastic Limit 0,2% 2 (Rp 0,2) min. N/mm Tensile strength 2 (Rm) N/mm Elongation (A5) min. % Cold rolled e≤ 6 mm Cold rolled e≤ 12 mm ≥240 ≥200 530 – 680 ≥40 Variable Temperature Temperature ºC Elastic Limit 0,2% (Rp 0,2) min. N/mm2 50 100 150 200 250 300 350 400 450 500 550 182 166 152 137 127 118 113 108 103 100 98 Welding Very good weldability. Classic recommendations for welding 2010NiMo stainless steel. It is preferably recommended using: BW ELC SS (for joint) and there are other alternatives in TIG and MIG process. Any queries, please contact the Technical Department of SOLDEX S.A. LIMA: Av. Oscar R. Benavides (ex Colonial) N° 1244 - 1260, Lima / Call Center: 719 8989 Extensions: 146 / 141 / Telefax: 7188222 / E-mail: gerencia@acepesac.com AREQUIPA: Calle Lambayeque N° 105 Mariano Melgar, Arequipa Telephone: 054450050 / Telefax: 054-454040 E-mail: arequipa@acepesac.com / Web Site: www.acerosdelperu.pe Temperature Effect on the mechanical properties Where: Rm: Tensile Strength Rp0.2: Creep Strength A : Reduction of Area Machining Recommendations Turning Turning with carbide Rough Fine Turning Turning Cutting Parameters Cutting speed (cs) m/min Feed (f) mm/r Depth of cut (ap) mm. ISO Machining Group Turning with high speed steel Fine Turning 170 – 145 160 – 200 25 – 45 0,2 - 0,4 0,1 - 0,2 0,1 - 0,5 1–4 0,5 – 1 0,5 – 3 M20-M30 M10 - Milling with carbide Cutting Parameters Milling with carbide Rough milling 60 – 120 0,2 - 0,3 ≤4 M20 – M30 Cutting speed (cs) m/min Feed (fz) mm/tooth Depth of cut (ap) mm. ISO Machining Group Fine milling 100 – 155 0,2 ≤0,6 M10 Drilling with HSS bit Diameter Cutting speed (vc) m/min. Feed (f) mm/r 20 30 40 200 200 200 0,01 0,12 0,15 LIMA: Av. Oscar R. Benavides (ex Colonial) N° 1244 - 1260, Lima / Call Center: 719 8989 Extensions: 146 / 141 / Telefax: 7188222 / E-mail: gerencia@acepesac.com AREQUIPA: Calle Lambayeque N° 105 Mariano Melgar, Arequipa Telephone: 054450050 / Telefax: 054-454040 E-mail: arequipa@acepesac.com / Web Site: www.acerosdelperu.pe