Subido por Cesar Marquez

CWP0602 ReleaseNotes

Anuncio
ControlWave Firmware
Release Notes
December 2021
ControlWave Firmware Release Notes
Version: 06.02.00 – Build date: 22-Dec-2021
Description
This document describes release 06.02.00 of the ControlWave platform firmware. This document describes the items
addressed in this release, details compatibilities, provides upgrade instructions, and includes a revision history. The features
described in this document are available only if they are appropriately incorporated into the application running in the RTU.
Major Updates and Enhancements

Updates to detect and notify user of flash chip hardware failures. Upon detection of a flash hardware failure, the
ControlWave unit will indicate a flash memory error and then reset. The user may optionally disable the reset after
flash failure detection, but must add logic in the application to monitor for a flash failure condition. (SupportNet
159160, Jira CW-411)
Compatibility
Item
FW ID
Part Number
Version
ControlWave PAC (586)
ControlWave PAC Expansion I/O (RIO)
CWP
C5R
06.02.00
06.02.00
ControlWave Express 14 MHz
E1S
ControlWave Express 33 MHz
E3S
400160-01-3
400160-02-1
400094-01-0
400094-02-9
400094-05-3
400094-10-0
400129-01-9
400129-02-7
400094-10-8
400159-01-5C
400159-02-3C
400159-04-0
400094-03-7
400094-04-5
400094-06-1
400094-11-8
400094-12-6
400094-13-4
400129-03-5
400129-04-3
400129-05-1
400129-11-6
400129-12-4
400129-13-2
400159-03-1
400159-05-8
400058-04-9
400127-01-0
400161-01-0
400161-02-8
400164-01-9
ControlWave Micro 150 MHz
1
CWM
06.02.00
06.02.00
06.02.00
www.Emerson.com/SupportNet
ControlWave Firmware
Item
Release Notes
December 2021
FW ID
ControlWave Micro Expansion I/O (RIO)
CMR
ControlWave Micro 33 MHz
CEW
Part Number
400058-07-3
400161-04-4
400154-02-1
400161-03-6
Version
06.02.00
06.02.00
Firmware/Software Update Instructions


Upgrade instructions for system firmware are available in the corresponding instruction manuals for each device.
Field upgrade of the HBA firmware is not possible.
Before upgrading:
o Determine the specific transmitter requirements
o Perform a full Alarm and Historical collection (archive files and audit logs)
o Consider version and possible corruption of transmitter data. Due to compatibility issues, non-volatile transmitter
data can be corrupted if left connected during firmware upgrades. Disconnect the field link device from the IEC
module during firmware upgrades to avoid possible corruption.

Case 1: 5.79.00 and older with IEC V1.11 (and older): no issue

Case 2: 5.79.00 and IEC V1.20: chance for corruption

Case 3: 5.80.00 and IEC V1.11: chance for corruption

Case 4: 5.80.00 and IEC V1.20 (and later): no issue
Known Limitations and/or Issues

IEC V1.20 is not backwards-compatible with CW version 5.79 and earlier.
Change History
Refer to the All_Release_Notes.HTM file included in the firmware installer for links to release notes for previous releases.
2
www.Emerson.com/SupportNet
ControlWave Firmware
Release Notes
December 2021
www.facebook.com/RemoteAutomationSolutions
www.twitter.com/Emerson_RAS
www.youtube.com/c/RemoteAutomationSolutions
© 2006-2021 Emerson Automation Solutions. All rights reserved.
Emerson Automation Solutions
Remote Automation Solutions
6005 Rogerdale Road
Houston, Texas 77072
www.Emerson.com/RemoteAutomation
www.Emerson.com/SupportNet
The contents of this publication are presented for informational purposes only. While every
effort has been made to ensure informational accuracy, they are not to be construed as
warranties or guarantees, express or implied, regarding the products or services described
herein or their use or applicability. Emerson Automation Solutions reserves the right to modify
or improve the designs or specifications of such products at any time without notice. All sales
are governed by Emerson Automation Solutions’ terms and conditions which are available upon
request. Emerson Automation Solutions does not assume responsibility for the selection, use or
maintenance of any product. Responsibility for proper selection, use and maintenance of any
Emerson Automation Solutions product remains solely with the purchaser and end-user.
Descargar